gcs-2015-line-card-booklet

2014 Line Card Catalog

Garnett Component Sales, Inc.www.garnettcomponentsales.com

www.garnettcomponentsales.com

ABOUT GCSGarnett Component Sales, Inc. is a professional multi-person manufacturer’s representative agency. We specialize in the sale of custom engineered mechanical components to the O.E.M. market place. Headquartered in metropolitan Raleigh, NC and with branch locations strategically positioned throughout the territory, we are able to respond to our customers with timely in person visits as well as written and verbal communication.

With a combined outside sales experience of over 100 years and our extensive knowledge, we are proud to be recognized as a leader to the O.E.M. community. States within the region we represent include Virginia, North and South Carolina, Kentucky, Tennessee, Georgia and Alabama. This territory is commonly referred to as MANA 7 and 8.

Our principals are well renowned and exceedingly qualified manufacturers of custom engineered components and reflect the corresponding ISO, TS, AS 9100 and or FDA certifications. Our commitment to excellence in representing our principals and adding value to the relationships we have formed with our diverse O.E.M. customer base has earned us a reputation for producing results on a consistent basis.

We are highly successful in supplying our varied mix of products and services to customers such as Aerospace, Medical, Military, Automotive, Industrial and many more which can be found in our website. We welcome your interest in our agency, market place and to the growth and development of our principals. We look forward to working with you in the near future.

PAGE

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

MANUFACTURER

JMC Tool & Machine

Fischer Special Manufacturing

Pressteck

Multi Tech Industries

New Standard Corporation

Theta TTS

Genesee Global Group

Tessy

TechnoTronix

Empire Die Casting

Challenger Component Services

Sherry International

JLO Metal Products

Spantek

Flexan

Web Seal

SPECIALITY

Custom Machining

Custom Machining (Multi-Spindle)

Deep Drawn Components

Machining, Stampings, Wire Forms, Springs, Fasteners & Assemblies

Heavy Stamping & Metal Fabrication

Fine Blanking

Electro-Mechanical Assembly

Plastic Injection Molding

Printed Circuit Boards

Aluminum & Zinc Die Casting

Distributor of “Class C” Type Items

Overseas Sourcing

Custom Aluminum Impact Extrusions

Expanded Metal

Custom Molded Rubber

O-Rings, Gaskets & Sealing Products

Introduction


President / Owner Tel: (919) 562-5158Cell: (919) 801-4627Fax: (919) 724-4869 [email protected]: All States

TommyGarnett

GCS Sales Representative Tel: (270) 991-1510 Fax: (919) [email protected] Territory: TN, KY

DanWilson

GCS Sales Representative Tel: (678) 699-9152 Fax: (770) [email protected] Territory: GA, AL

MarkSnyder

GCS Sales Representative Tel: (864) 979-5490 Fax: (919) [email protected] Territory: SC

JohnDavis

GCS Sales RepresentativeTel: (716) 864-4014Fax: (716) 235-2534 [email protected]: AL

Andrew Brown

GCS Sales Representative Tel: (919) 601-2959 Fax: (919) 724-4869 [email protected]: Eastern VA, Eastern NC & Eastern SC

JohnTaylor

Sales & Operations Manager Tel: (919) 562-5158 Fax: (919) 724-4869 [email protected]

AngelaGarnett

Marketing DirectorTel: (919) 395-2765Fax: (919) 724-4869 [email protected]

JennyGarnett Bryan

NASHVILLE BRANCH18 Sulphur Spring Church Rd.Franklin, KY 42134

ATLANTA BRANCH6050 Peachtree PkwySuite 240-156Norcross, GA 30092

GREENVILLE BRANCH213 Huddersfield RoadSimpsonville, SC 29681

RALEIGH HEADQUARTERS2824 Penfold LaneWake Forest, NC 27587

MOBILE BRANCH251 Adams StreetMobile, AL 36603

KY

TN

AL GA

SC

NC

VA

GCS Sales Representative Tel: (704) 364-0729 Cell: (704) 576-1513Fax: (919) [email protected]: Western NC

Rusty Burton

GCS Team & Territory Map

CHARLOTTE BRANCH4626 Addison DriveCharlotte, NC 28211

http://www.garnettcomponentsales.com

mailto:[email protected]











ABOUT GCSGarnett Component Sales, Inc. is a professional multi-person manufacturer’s representative agency. We specialize in the sale of custom engineered mechanical components to the O.E.M. market place. Headquartered in metropolitan Raleigh, NC and with branch locations strategically positioned throughout the territory, we are able to respond to our customers with timely in person visits as well as written and verbal communication.

With a combined outside sales experience of over 100 years and our extensive knowledge, we are proud to be recognized as a leader to the O.E.M. community. States within the region we represent include Virginia, North and South Carolina, Kentucky, Tennessee, Georgia and Alabama. This territory is commonly referred to as MANA 7 and 8.

Our principals are well renowned and exceedingly qualified manufacturers of custom engineered components and reflect the corresponding ISO, TS, AS 9100 and or FDA certifications. Our commitment to excellence in representing our principals and adding value to the relationships we have formed with our diverse O.E.M. customer base has earned us a reputation for producing results on a consistent basis.

We are highly successful in supplying our varied mix of products and services to customers such as Aerospace, Medical, Military, Automotive, Industrial and many more which can be found in our website. We welcome your interest in our agency, market place and to the growth and development of our principals. We look forward to working with you in the near future.

PAGE

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

MANUFACTURER

JMC Tool & Machine

Fischer Special Manufacturing

Pressteck

Multi Tech Industries


Theta TTS


Tessy

TechnoTronix

Empire Die Casting



JLO Metal Products

Spantek

Flexan

Web Seal

SPECIALITY

Custom Machining





Fine Blanking




Aluminum & Zinc Die Casting

Distributor of “Class C” Type Items

Overseas Sourcing


Expanded Metal



Introduction


President / Owner Tel: (919) 562-5158Cell: (919) 801-4627Fax: (919) 724-4869 [email protected]: All States

TommyGarnett

GCS Sales Representative Tel: (270) 991-1510 Fax: (919) [email protected] Territory: TN, KY

DanWilson

GCS Sales Representative Tel: (678) 699-9152 Fax: (770) [email protected] Territory: GA, AL

MarkSnyder

GCS Sales Representative Tel: (864) 979-5490 Fax: (919) [email protected] Territory: SC

JohnDavis

GCS Sales RepresentativeTel: (716) 864-4014Fax: (716) 235-2534 [email protected]: AL

Andrew Brown

GCS Sales Representative Tel: (919) 601-2959 Fax: (919) 724-4869 [email protected]: Eastern VA, Eastern NC & Eastern SC

JohnTaylor

Sales & Operations Manager Tel: (919) 562-5158 Fax: (919) 724-4869 [email protected]

AngelaGarnett

Marketing DirectorTel: (919) 395-2765Fax: (919) 724-4869 [email protected]

JennyGarnett Bryan

NASHVILLE BRANCH18 Sulphur Spring Church Rd.Franklin, KY 42134

ATLANTA BRANCH6050 Peachtree PkwySuite 240-156Norcross, GA 30092

GREENVILLE BRANCH213 Huddersfield RoadSimpsonville, SC 29681

RALEIGH HEADQUARTERS2824 Penfold LaneWake Forest, NC 27587

MOBILE BRANCH251 Adams StreetMobile, AL 36603

KY

TN

AL GA

SC

NC

VA

GCS Sales Representative Tel: (704) 364-0729 Cell: (704) 576-1513Fax: (919) [email protected]: Western NC

Rusty Burton

GCS Team & Territory Map

CHARLOTTE BRANCH4626 Addison DriveCharlotte, NC 28211












GCS 2014 Line Card Catalog

3

For more information visit:www.jmctool.com

• CNC Turning Centers• CNC Swiss Turning• Vertical Machining• Horizontal Machining• CNC Manual & Prototype• Laser, Brake, and Welding• Light Assembly• Manual Lathes• Accepts Solid Files

• ISO 9001:2008 Certified

Headquarters & Main Plant:5901 Elwin Buchanan Drive, Sanford, NC 27330

JMC Tool & Machine Co. is an ISO 9001:2008 Certified leader in providing precision machined components and assemblies to a wide variety of industries including automotive, electronics, telecommunications and medical. JMC serves regional and global manufacturing companies with locations in the Southeast from its production facility in Apex, North Carolina.

JMC has created a first class business structure to facilitate strong growth and superior product featuring: extensive CNC and traditional machining capabilities, high quality machine tools, turnkey solutions, parts stocking programs, design engineering for short run and specialty products, a high caliber work force, and award winning customer service.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

JMC Tool & Machine

Custom Machining


4

For more information visit:www.fischerspecial.com

• Davenport• Index• ACME• ANSI H-28 or JIS thread standards• Nickle, Zinc, Chrome, Cadmium, Silver & Electro-Tin• Horizontal CNC Turning• Vertical CNC Turning• Electronic Size Certification• Precision Screw Machine Parts• Materials: Brass, Bronze, Carbon Steel, Stainless Steel, Copper and Aluminum


Headquarters & Main Plant:1188 Industrial Road, Cold Spring, KY 41076

Since 1905, Fischer has been supplying precision-crafted parts to nearly every industry. Their long-time customers include top companies and leading brand names — from musical to automotive to medical to appliances — all of which demand the high degree of quality and dependability only Fischer can provide. Thanks to unsurpassed craftsmanship and a relentless dedication to detail, Fischer has proven its ability to precision manufacture each of its screw machine parts, nuts and inserts within remarkably close tolerances. Which means you’ll always have the benefit of hassle-free automatic or hand assembly…no matter what finish, configuration, or application you specify.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Fisher Special Manufacturing


http://www.jmctool.com

http://www.fischerspecial.com



3

For more information visit:www.jmctool.com

• CNC Turning Centers• CNC Swiss Turning• Vertical Machining• Horizontal Machining• CNC Manual & Prototype• Laser, Brake, and Welding• Light Assembly• Manual Lathes• Accepts Solid Files


Headquarters & Main Plant:5901 Elwin Buchanan Drive, Sanford, NC 27330

JMC Tool & Machine Co. is an ISO 9001:2008 Certified leader in providing precision machined components and assemblies to a wide variety of industries including automotive, electronics, telecommunications and medical. JMC serves regional and global manufacturing companies with locations in the Southeast from its production facility in Apex, North Carolina.

JMC has created a first class business structure to facilitate strong growth and superior product featuring: extensive CNC and traditional machining capabilities, high quality machine tools, turnkey solutions, parts stocking programs, design engineering for short run and specialty products, a high caliber work force, and award winning customer service.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

JMC Tool & Machine

Custom Machining


4

For more information visit:www.fischerspecial.com

• Davenport• Index• ACME• ANSI H-28 or JIS thread standards• Nickle, Zinc, Chrome, Cadmium, Silver & Electro-Tin• Horizontal CNC Turning• Vertical CNC Turning• Electronic Size Certification• Precision Screw Machine Parts• Materials: Brass, Bronze, Carbon Steel, Stainless Steel, Copper and Aluminum


Headquarters & Main Plant:1188 Industrial Road, Cold Spring, KY 41076

Since 1905, Fischer has been supplying precision-crafted parts to nearly every industry. Their long-time customers include top companies and leading brand names — from musical to automotive to medical to appliances — all of which demand the high degree of quality and dependability only Fischer can provide. Thanks to unsurpassed craftsmanship and a relentless dedication to detail, Fischer has proven its ability to precision manufacture each of its screw machine parts, nuts and inserts within remarkably close tolerances. Which means you’ll always have the benefit of hassle-free automatic or hand assembly…no matter what finish, configuration, or application you specify.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Fisher Special Manufacturing


http://www.jmctool.com

http://www.fischerspecial.com



5

• Cutting technique• Non-cutting deformation• Thermal processing• Surface coatings • Washing and cleaning• Tumbling

• ISO 14001• TS 16949:2002• EN ISO 9001:2000

Headquarters & Main Plant:Zona Industriale San GiorgioI-0943 Muravera (CA)Italy – Sardegna

PressTeck is one of the leading manufacturers of high precision deep drawn parts produced on progressive and transfer presses.

Our aim is to have a long-running cooperation and partnership. Our project managers are in dialogue with the customer in all phases – from the analysis of the inquiry, shaping of ideas and feasibility study to the development, product production, manufacture and logistics.

Quality is planned from the beginning and accompanies the products from the process of development over the value process to customer acceptance.

The customer receives the complete solution from one source, beginning with product development of prototypes, tool manufacturing, transfer presses, heat treatment, cleaning, to the complete assembly of product groups and systems.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Pressteck

For more information visit:www.pressteckspa.com



6

For more information visit:www.multitechind.com

• Cold Headed Fasteners• Stampings• Machined Components• Wire Formings• Springs

ISO/ TS 16949 Quality Certified Facility

Corporate Headquarters - Carol Stream, ILDistribution / Assembly - Indianapolis, INDistribution / Assembly - Mullins, SCDistribution / Assembly - Matamoros, MexicoLCC Distribution / Assembly - Bangalore, IndiaProgressive Die Stamping Manufacturing - Woodstock, ILScrew Machine Manufacturing - Elgin, ILCold Headed Fastener Manufacturing - Franklin Park, ILSpring Manufacturing - Plainfield Township, MIWire Form & Fourslide Manufacturing - Addison, ILBusan, South KoreaTaipei, TaiwanQingdao, China

MultiTech Industries was incorporated in 1993. A TS 16949 certified minority owned company; MultiTech has created a manufacturing footprint in multiple metal commodities thus making it a one-stop shop for customers needs in various commodities for engineered products and solutions.

We are recognized for our ability to supply an extensive range of quality world class metal components. MultiTech offers engineering-intensive solutions to custom product design requirements. We provide a line of highly engineered, custom metal products that leverage current in-depth knowledge with some of the best manufacturing techniques and custom delivery solutions available today.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Multitech Industries


http://www.pressteckspa.com

http://www.multitechind.com



5

• Cutting technique• Non-cutting deformation• Thermal processing• Surface coatings • Washing and cleaning• Tumbling

• ISO 14001• TS 16949:2002• EN ISO 9001:2000

Headquarters & Main Plant:Zona Industriale San GiorgioI-0943 Muravera (CA)Italy – Sardegna

PressTeck is one of the leading manufacturers of high precision deep drawn parts produced on progressive and transfer presses.

Our aim is to have a long-running cooperation and partnership. Our project managers are in dialogue with the customer in all phases – from the analysis of the inquiry, shaping of ideas and feasibility study to the development, product production, manufacture and logistics.

Quality is planned from the beginning and accompanies the products from the process of development over the value process to customer acceptance.

The customer receives the complete solution from one source, beginning with product development of prototypes, tool manufacturing, transfer presses, heat treatment, cleaning, to the complete assembly of product groups and systems.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Pressteck

For more information visit:www.pressteckspa.com



6

For more information visit:www.multitechind.com

• Cold Headed Fasteners• Stampings• Machined Components• Wire Formings• Springs

ISO/ TS 16949 Quality Certified Facility

Corporate Headquarters - Carol Stream, ILDistribution / Assembly - Indianapolis, INDistribution / Assembly - Mullins, SCDistribution / Assembly - Matamoros, MexicoLCC Distribution / Assembly - Bangalore, IndiaProgressive Die Stamping Manufacturing - Woodstock, ILScrew Machine Manufacturing - Elgin, ILCold Headed Fastener Manufacturing - Franklin Park, ILSpring Manufacturing - Plainfield Township, MIWire Form & Fourslide Manufacturing - Addison, ILBusan, South KoreaTaipei, TaiwanQingdao, China

MultiTech Industries was incorporated in 1993. A TS 16949 certified minority owned company; MultiTech has created a manufacturing footprint in multiple metal commodities thus making it a one-stop shop for customers needs in various commodities for engineered products and solutions.

We are recognized for our ability to supply an extensive range of quality world class metal components. MultiTech offers engineering-intensive solutions to custom product design requirements. We provide a line of highly engineered, custom metal products that leverage current in-depth knowledge with some of the best manufacturing techniques and custom delivery solutions available today.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Multitech Industries


http://www.pressteckspa.com

http://www.multitechind.com



7

For more information visit:www.newstandard.com

• Fabrication• Metal Stamping• Welding• Assembly

• ISO/TS 16949:2009 Certified Facility

Headquarters & Main Plant:74 Commerce Way, York PA 17406

New Standard – York Plant170,000 sq. ft.York, Pennsylvania

New Standard – Mt. Joy Plant70,000 sq. ft.Mount Joy, Pennsylvania

New Standard engineers focus on providing a complete set of solutions to the complex problems and needs of our customers. We determine the right process for the right engagement for the rightcost position each and every time. New Standard owns a wide range of Metal Fabrication, Stamping & Assembly equipment allowing us to meet virtually any custom fabrication requirement.

A metal stamping company with full fabrication capability and the capacity to deliver a fully finished and assembled part directly to yourfacility...another New Standard Solution.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:




8

For more information visit:www.thetatts.com

LOCATIONS:

CAPABILITIES:

CERTIFICATIONS:

ABOUT:

Fine Blanking

• ISO 9001:2008 Certified• TS 16949:2009 Certified

Headquarters & Main Plant:8 Truman Road, Barrie, Ontario, Canada L4N 8Y8

For more than fifty years Theta TTS has providedmanufacturers in the automotive industry with high quality parts and a reliable cost-effective partner. Today, fine blanking represents the fastest growing area for our company.

Fine blanking opens up a wider range of options for your product, providing flexibility for your design and precisionin its application. Incorporate more intricate parts, enjoy superior flatness, and have confidence in the consistency of the process. We construct fully functional prototypes to ensure the end product meets your specifications exactly.

Theta TTS

• Fine Blanking is a hybrid metal forming process combining the technologies of stamping and cold extrusion. Triple-action presses combined with specially designed tooling produce parts impossible to make with any other stamping process.

• Meticulous maintenance, a climate-controlled workspace, and regular monitoring of all processes ensure that our facilities are kept in optimal condition, producing results you can count on every time.

• 3 Fine Blanking Presses up to 650 ton• 2 Niederberger for surface finishing• Automated sanding equipment

http://www.newstandard.com

http://www.thetatts.com



7

For more information visit:www.newstandard.com

• Fabrication• Metal Stamping• Welding• Assembly

• ISO/TS 16949:2009 Certified Facility

Headquarters & Main Plant:74 Commerce Way, York PA 17406

New Standard – York Plant170,000 sq. ft.York, Pennsylvania

New Standard – Mt. Joy Plant70,000 sq. ft.Mount Joy, Pennsylvania

New Standard engineers focus on providing a complete set of solutions to the complex problems and needs of our customers. We determine the right process for the right engagement for the rightcost position each and every time. New Standard owns a wide range of Metal Fabrication, Stamping & Assembly equipment allowing us to meet virtually any custom fabrication requirement.

A metal stamping company with full fabrication capability and the capacity to deliver a fully finished and assembled part directly to yourfacility...another New Standard Solution.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:




8

For more information visit:www.thetatts.com

LOCATIONS:

CAPABILITIES:

CERTIFICATIONS:

ABOUT:

Fine Blanking


Headquarters & Main Plant:8 Truman Road, Barrie, Ontario, Canada L4N 8Y8

For more than fifty years Theta TTS has providedmanufacturers in the automotive industry with high quality parts and a reliable cost-effective partner. Today, fine blanking represents the fastest growing area for our company.

Fine blanking opens up a wider range of options for your product, providing flexibility for your design and precisionin its application. Incorporate more intricate parts, enjoy superior flatness, and have confidence in the consistency of the process. We construct fully functional prototypes to ensure the end product meets your specifications exactly.

Theta TTS

• Fine Blanking is a hybrid metal forming process combining the technologies of stamping and cold extrusion. Triple-action presses combined with specially designed tooling produce parts impossible to make with any other stamping process.

• Meticulous maintenance, a climate-controlled workspace, and regular monitoring of all processes ensure that our facilities are kept in optimal condition, producing results you can count on every time.

• 3 Fine Blanking Presses up to 650 ton• 2 Niederberger for surface finishing• Automated sanding equipment

http://www.newstandard.com

http://www.thetatts.com


www.garnettcomponentsales.comwww.garnettcomponentsales.comGCS 2014 Line Card Catalog

9

1. Project Analysis2. Design for Manufacturability3. Prototyping and Tooling4. Production5. Testing and Quality Control6. Global Supply and Value Added


Headquarters & Main Plant:975 John Street, West Henrietta, NY 14586

WHERE CRAFT AND TECHNOLOGY MEET - More than 60 years of experience and expertise.

Genesee Global Group is a trusted contract manufacturer of sophisticated assemblies, components and parts to companies around the world. As a privately held company with a progressive hands-on management team, Genesee looks for long-term relationships with customers who view them as an extension of their manufacturing operations. They are proud to be an ISO 9001:2000-certified company.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

• Precision Metal Fabrication• Robotic Welding• Metal Stamping• Electromechanical Assemblies• In-House Engineering & Tooling• Basic Phases of Project Lifecycle:


For more information visit:www.geneseeglobal.com


10

ISO 9001-2008 (2008) FDA Compliant (NY Facility) GMP Compliant UL Approved (UL#A1231) FFAL – ATF #1-54-680-07-8E-02609 FAA compliant (AS9100)

Headquarters & Main Plant:231 Jefferson Ridge Parkway, Lynchburg, VA 24501

Centrally located in the Blue Ridge Mountains of Virginia, Tessy has been a premier molder of custom injection molded plastic components since 1997 in Lynchburg, Virginia. A division of Tessy Plastics Corporation, this plant operates 24/7 in a privately-owned 60,000 square-foot air-conditioned facility and houses 40 molding machines run with 200 employees. Serving the industry leaders in the medical, automotive, aerospace, military and consumer products markets, Tessy excels in bringing the most challenging and innovative part designs from concept to reality.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Tessy Plastics

For more information visit:www.tessyva.com


Manufacturing Technologies•Injection Molding 40 to 720 tons•Gas Assist Molding•Two Shot Molding•Insert Molding•Overmolding

Scientific Molding•Cavity Pressure Sensor Technology•Decoupled Molding SM•Remotely Interact on Process Validation•Robust Process Templates

http://www.geneseeglobal.com


http://www.tessyva.com

www.garnettcomponentsales.comwww.garnettcomponentsales.comGCS 2014 Line Card Catalog

9

1. Project Analysis2. Design for Manufacturability3. Prototyping and Tooling4. Production5. Testing and Quality Control6. Global Supply and Value Added


Headquarters & Main Plant:975 John Street, West Henrietta, NY 14586

WHERE CRAFT AND TECHNOLOGY MEET - More than 60 years of experience and expertise.

Genesee Global Group is a trusted contract manufacturer of sophisticated assemblies, components and parts to companies around the world. As a privately held company with a progressive hands-on management team, Genesee looks for long-term relationships with customers who view them as an extension of their manufacturing operations. They are proud to be an ISO 9001:2000-certified company.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

• Precision Metal Fabrication• Robotic Welding• Metal Stamping• Electromechanical Assemblies• In-House Engineering & Tooling• Basic Phases of Project Lifecycle:


For more information visit:www.geneseeglobal.com


10

ISO 9001-2008 (2008) FDA Compliant (NY Facility) GMP Compliant UL Approved (UL#A1231) FFAL – ATF #1-54-680-07-8E-02609 FAA compliant (AS9100)

Headquarters & Main Plant:231 Jefferson Ridge Parkway, Lynchburg, VA 24501

Centrally located in the Blue Ridge Mountains of Virginia, Tessy has been a premier molder of custom injection molded plastic components since 1997 in Lynchburg, Virginia. A division of Tessy Plastics Corporation, this plant operates 24/7 in a privately-owned 60,000 square-foot air-conditioned facility and houses 40 molding machines run with 200 employees. Serving the industry leaders in the medical, automotive, aerospace, military and consumer products markets, Tessy excels in bringing the most challenging and innovative part designs from concept to reality.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Tessy Plastics

For more information visit:www.tessyva.com


Manufacturing Technologies•Injection Molding 40 to 720 tons•Gas Assist Molding•Two Shot Molding•Insert Molding•Overmolding

Scientific Molding•Cavity Pressure Sensor Technology•Decoupled Molding SM•Remotely Interact on Process Validation•Robust Process Templates

http://www.geneseeglobal.com


http://www.tessyva.com


11

• Product Design, Development and Production (ODM / DFM)• PCB Design and Lay out• PCB Fabrication (Prototype/Quick turn , Rigid, Rigid-Flex, Flex)• PCB Fabrication (Low - Medium-High volume Production)• PCB Assembly ( Consignment)• PCB Assembly (Turnkey Including Hardware)• Programming Devices (Components to Board Level)• Conformal Coating (Acrylic, Urethane base etc)

• ISO 9001: 2008• AS 9100 Rev. C Certified• Employees are Train for IPC and J-STD

Headquarters & Main Plant:1464 N Hundley Street Anaheim, CA 92806

TechnoTronix is aworld leader in contract Electronics Manufacturing Service Provider. We are in business to create turnkey solutions. We take clients’ Ideas and turn them into real products. We designed our state of the art facility to handle everything from quick turn prototype to medium to mass production. We handle high mix low volume, kitting, turnkey or box build, along with cable assemblies. We are equipped with fast pick & place to BGA machines, AOI and X-Rays for fast and reliable quality products.

At TechnoTronix, our vision is to provide an unmatched standard of service, quality, value, and on-time delivery to our customers. We have the capability to deliver prototypes within 24 hours with delivery time of as less as 3 weeks, for small to medium quantity production runs.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Technotronix

For more information visit:www.technotronix.us



12

For more information visit:www.empiredie.com

Empire Die Casting

ABOUT:

Aluminum and Zinc Die Casting

Die Casting•Aluminum Die Casting•Zinc Die CastingEngineering•Design Considerations•MAGMASOFTAdded Value Capabilities•Tool & Die Shop•Machining•Secondary Finishing

• ISO/TS 16949, ISO 14001 and ISO 9001 certified.

Headquarters & Main Plant:635 East Highland Road, Macedonia, OH 44056

We believe that the best way to ensure our success is by providing our customers consistent quality in a timely fashion and at a fair price. Despite being one of the most technologically advanced die casting operation in North America, the key to our success is as simple and complicated as that.

Make Empire Die Casting Co., Inc. your primary die casting provider and you will join a select group of national and international companies, many of which are leaders in the markets they serve. These companies have found Empire Die Casting Co., Inc. to consistently be their top performer among all other die casting providers.

LOCATIONS:

CAPABILITIES:

CERTIFICATIONS:

http://www.technotronix.us

http://www.empiredie.com



11

• Product Design, Development and Production (ODM / DFM)• PCB Design and Lay out• PCB Fabrication (Prototype/Quick turn , Rigid, Rigid-Flex, Flex)• PCB Fabrication (Low - Medium-High volume Production)• PCB Assembly ( Consignment)• PCB Assembly (Turnkey Including Hardware)• Programming Devices (Components to Board Level)• Conformal Coating (Acrylic, Urethane base etc)

• ISO 9001: 2008• AS 9100 Rev. C Certified• Employees are Train for IPC and J-STD

Headquarters & Main Plant:1464 N Hundley Street Anaheim, CA 92806

TechnoTronix is aworld leader in contract Electronics Manufacturing Service Provider. We are in business to create turnkey solutions. We take clients’ Ideas and turn them into real products. We designed our state of the art facility to handle everything from quick turn prototype to medium to mass production. We handle high mix low volume, kitting, turnkey or box build, along with cable assemblies. We are equipped with fast pick & place to BGA machines, AOI and X-Rays for fast and reliable quality products.

At TechnoTronix, our vision is to provide an unmatched standard of service, quality, value, and on-time delivery to our customers. We have the capability to deliver prototypes within 24 hours with delivery time of as less as 3 weeks, for small to medium quantity production runs.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Technotronix

For more information visit:www.technotronix.us



12

For more information visit:www.empiredie.com

Empire Die Casting

ABOUT:

Aluminum and Zinc Die Casting

Die Casting•Aluminum Die Casting•Zinc Die CastingEngineering•Design Considerations•MAGMASOFTAdded Value Capabilities•Tool & Die Shop•Machining•Secondary Finishing

• ISO/TS 16949, ISO 14001 and ISO 9001 certified.

Headquarters & Main Plant:635 East Highland Road, Macedonia, OH 44056

We believe that the best way to ensure our success is by providing our customers consistent quality in a timely fashion and at a fair price. Despite being one of the most technologically advanced die casting operation in North America, the key to our success is as simple and complicated as that.

Make Empire Die Casting Co., Inc. your primary die casting provider and you will join a select group of national and international companies, many of which are leaders in the markets they serve. These companies have found Empire Die Casting Co., Inc. to consistently be their top performer among all other die casting providers.

LOCATIONS:

CAPABILITIES:

CERTIFICATIONS:

http://www.technotronix.us

http://www.empiredie.com



13

Headquarters & Main Plant:427 Enos Reed Drive, Nashville, TN 37210

We believe the 21st century manufacturer has more responsibility than ever before. And purchasing Class C production components may not be the most glamorous part of any purchasing job, and may cause major stress when dealing with dozens if not hundreds of suppliers.

At Challenger, we recognize that however small these parts may be, not having them when you need them can stall manufacturing and cause production downtime. Our Vendor Managed Inventory (VMI) program has reduced production downtime and reduced total procurement cost for customers all over the globe. Our goal is to take care of all Class C component needs so that our customers can focus resources and time on other major purchases.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:


For more information visit:www.challengercomponentservices.com

Distributor of Class “C” Type Items

Automotive AftermarketAutomotive OECommercial IndustryElectrical EquipmentSporting EquipmentHeavy Equipment



14Overseas Sourcing

• Castings, forgings, die casting in grey iron, ductile iron, steel, aluminum etc.• All castings & forging parts meet AISI, DIN, JIS and other related international standards.

Headquarters & Main Plant:31-M Mountain Boulevard, Warren, NJ 07059Additional Manufacturing Plants:1099 Wuzhong Road, Suite 810, Shanghai, China 201103Xinkangyuan, Xisanqi, Haidian District, Beijing, China 100096

Created in 1994 in Beijing China, Sherry International, Inc. a small trading company with its roots in the export of industrial laminates and electrical insulation materials to Europe, has evolved into an international import & export company, integrating engineering & technical services with design, manufacturing and marketing.

Since moving its headquarters to New Jersey, USA in 1999, rapid progress has happened to this company. Not only has its products line been expanded from a limited scope at that time to a broad range of products today including mechanical & electric components and finished products. Sherry’s market has also expanded from solely Europe at that time to now North & South America which makes up the most important part of Sherry’s current business activities.

LOCATIONS:

ABOUT:

CAPABILITIES:


For more information visit:www.sherry-china.com

• ISO 9001:2008 Certified• TS 16949 Certified

CERTIFICATIONS:

http://www.challengercomponentservices.com

http://www.sherry-china.com



13

Headquarters & Main Plant:427 Enos Reed Drive, Nashville, TN 37210

We believe the 21st century manufacturer has more responsibility than ever before. And purchasing Class C production components may not be the most glamorous part of any purchasing job, and may cause major stress when dealing with dozens if not hundreds of suppliers.

At Challenger, we recognize that however small these parts may be, not having them when you need them can stall manufacturing and cause production downtime. Our Vendor Managed Inventory (VMI) program has reduced production downtime and reduced total procurement cost for customers all over the globe. Our goal is to take care of all Class C component needs so that our customers can focus resources and time on other major purchases.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:


For more information visit:www.challengercomponentservices.com

Distributor of Class “C” Type Items

Automotive AftermarketAutomotive OECommercial IndustryElectrical EquipmentSporting EquipmentHeavy Equipment



14Overseas Sourcing

• Castings, forgings, die casting in grey iron, ductile iron, steel, aluminum etc.• All castings & forging parts meet AISI, DIN, JIS and other related international standards.

Headquarters & Main Plant:31-M Mountain Boulevard, Warren, NJ 07059Additional Manufacturing Plants:1099 Wuzhong Road, Suite 810, Shanghai, China 201103Xinkangyuan, Xisanqi, Haidian District, Beijing, China 100096

Created in 1994 in Beijing China, Sherry International, Inc. a small trading company with its roots in the export of industrial laminates and electrical insulation materials to Europe, has evolved into an international import & export company, integrating engineering & technical services with design, manufacturing and marketing.

Since moving its headquarters to New Jersey, USA in 1999, rapid progress has happened to this company. Not only has its products line been expanded from a limited scope at that time to a broad range of products today including mechanical & electric components and finished products. Sherry’s market has also expanded from solely Europe at that time to now North & South America which makes up the most important part of Sherry’s current business activities.

LOCATIONS:

ABOUT:

CAPABILITIES:


For more information visit:www.sherry-china.com

• ISO 9001:2008 Certified• TS 16949 Certified

CERTIFICATIONS:

http://www.challengercomponentservices.com

http://www.sherry-china.com



15

• Impact extruded componentfor automotive, ordnance, lighting, power electronics, packaging & more• Custom extrusions including forward impact, reverse impact, and combination impact• Engineering Assistance• Secondary operations for finishing


Headquarters & Main Plant:5481 W. Dickens Avenue, Chicago, IL 60639

Since their inception in 1972, JLO Metal Products, Inc. has supplied custom aluminum impact extrusion solutions for a diverse array of industries. Their reach extends from high-volume industrial producers such as Tier 1 and Tier 2 automotive suppliers to detail-oriented military contractors to commercial ventures such as lighting component manufacturers and durable packaged goods providers.

JLO’s commitment to quality assures that each of their valued business partners will realize the same high level of customer satisfaction. They make every effort to eliminate all non-conformances from their process and to deliver every product order promptly.

With aluminum quickly becoming the material of choice for new generations of automobile and aircraft components, for the latest ordnance products, and for countless other commercial and industrial can-shaped designs, JLO Metal Products is well positioned for future growth.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

JLO Metal Products

For more information visit:www.jlometal.com



16

For more information visit:www.spantek.com

LOCATIONS:

CAPABILITIES:

Spantek

ABOUT:

Expanded Metal

CERTIFICATIONS:

For well over 40 years, Spantek has been a recognized leader in the expanded metal industry. With plants in both Minnesota and North Carolina, Spantek can offer unique dual sourcing solutions for expanded metal users.

At Spantek, the focus is on serving the customer with an unmatched level of “customer-driven” service and support. Spantek offers a unique engineering-based approach to solving your expanded metal component problems. In addition, they are market innovators in providing value-added logistic management programs designed to reduce your total cost of doing business.

• Minneapolis, MN: 38,000 square feet manufacturing / 3,530 square meters• Lincolnton, NC: 58,125 square feet manufacturing / 5,399 square meters• Over 60 die patterns • Custom pattern designs • Materials: CRS, Galvanized coated, Stainless Steel, Aluminum, Titanium, Copper• Widths: Up to 72” / 1,828 MM• Raw coil thickness: .010” / .25 MM to .200” / 5.08 MM• SWD: .070” / 1.78 MM to 2.50” / 63.50 MM• LWD: .105” / 2.67 MM to 5.50” / 139.70 MM• Strand width: Up to .400” / 10.16 MM


1520 South 5th Street, Hopkins, MN 55343 352 N Generals Blvd., Lincolnton, NC 28092

http://www.jlometal.com

http://www.spantek.com



15

• Impact extruded componentfor automotive, ordnance, lighting, power electronics, packaging & more• Custom extrusions including forward impact, reverse impact, and combination impact• Engineering Assistance• Secondary operations for finishing


Headquarters & Main Plant:5481 W. Dickens Avenue, Chicago, IL 60639

Since their inception in 1972, JLO Metal Products, Inc. has supplied custom aluminum impact extrusion solutions for a diverse array of industries. Their reach extends from high-volume industrial producers such as Tier 1 and Tier 2 automotive suppliers to detail-oriented military contractors to commercial ventures such as lighting component manufacturers and durable packaged goods providers.

JLO’s commitment to quality assures that each of their valued business partners will realize the same high level of customer satisfaction. They make every effort to eliminate all non-conformances from their process and to deliver every product order promptly.

With aluminum quickly becoming the material of choice for new generations of automobile and aircraft components, for the latest ordnance products, and for countless other commercial and industrial can-shaped designs, JLO Metal Products is well positioned for future growth.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

JLO Metal Products

For more information visit:www.jlometal.com



16

For more information visit:www.spantek.com

LOCATIONS:

CAPABILITIES:

Spantek

ABOUT:

Expanded Metal

CERTIFICATIONS:

For well over 40 years, Spantek has been a recognized leader in the expanded metal industry. With plants in both Minnesota and North Carolina, Spantek can offer unique dual sourcing solutions for expanded metal users.

At Spantek, the focus is on serving the customer with an unmatched level of “customer-driven” service and support. Spantek offers a unique engineering-based approach to solving your expanded metal component problems. In addition, they are market innovators in providing value-added logistic management programs designed to reduce your total cost of doing business.

• Minneapolis, MN: 38,000 square feet manufacturing / 3,530 square meters• Lincolnton, NC: 58,125 square feet manufacturing / 5,399 square meters• Over 60 die patterns • Custom pattern designs • Materials: CRS, Galvanized coated, Stainless Steel, Aluminum, Titanium, Copper• Widths: Up to 72” / 1,828 MM• Raw coil thickness: .010” / .25 MM to .200” / 5.08 MM• SWD: .070” / 1.78 MM to 2.50” / 63.50 MM• LWD: .105” / 2.67 MM to 5.50” / 139.70 MM• Strand width: Up to .400” / 10.16 MM


1520 South 5th Street, Hopkins, MN 55343 352 N Generals Blvd., Lincolnton, NC 28092

http://www.jlometal.com

http://www.spantek.com



17

• Micro Precision Components• Specialists in Custom Molded Rubber• Rapid Prototypes• Rubber Bonded to Metal or Plastic• In-House Compounding


Headquarters & Main Plant:6626 West Dakin Street, Chicago, IL 60634Additional Manufacturing Plants:Suzhou, China

Flexan specializes in custom molded rubber, rubber molding, and rubber parts. Flexan provides vertically integrated molding services to the OEM marketplace in a wide variety of industries, including: automotive, military, aerospace, hearing aid, medical, micro precision, industrial controls, and food/water handling. Whether your application requires material development, design assistance, specific testing or extremely tight tolerances, their staff of professional chemists and engineers have the experience and expertise to develop and deliver your rubber part.

Low Cost Country SourcingWith facilities in both Chicago and China, the Flexan Corp. offers you the option of choosing what is best for your business. Both facilities have similar rubber molding capabilities and both offer engineering, project management, packaging, and supply chain services. Custom formulations to meet the specific needs of your application are available at both locations, as well as material development, sampling, and prototyping.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Flexan

For more information visit:www.flexan.com



18

For more information visit:www.websealinc.com

Web Seal

ABOUT:


• O-Rings in all standard & metric sizes• Dynamic Seals• Custom Die Cut & Gaskets• Assembly & Inventory Services• Bar Coding & Color Coding

• ISO 9001 Certified

Headquarters & Main Plant:15 Oregon Street, Rochester, NY 14605

Have a sealing application? Whether you want to seal contaminants out of your equipment – or contain fluids, particulates, gases, light, or noise – shield EMI/RFI – or have some unique application -- the seal technology you choose is critical to your success. Let Web Seal’s experts help with your design.

Web Seal specializes in: O-Rings, Custom Die Cuts & Gaskets and Dynamic Seals. Web Seal also provides a large assortment of products that perform in a wide range of other sealing applications, from expansion joints to fastener seals, quad rings to spliced O-rings, and pump packings to adhesives and RTVs. Related products such as O-ring kits, shims, spacers and tubing are also available.

LOCATIONS:

CAPABILITIES:

CERTIFICATIONS:

http://www.flexan.com

http://www.websealinc.com



17

• Micro Precision Components• Specialists in Custom Molded Rubber• Rapid Prototypes• Rubber Bonded to Metal or Plastic• In-House Compounding


Headquarters & Main Plant:6626 West Dakin Street, Chicago, IL 60634Additional Manufacturing Plants:Suzhou, China

Flexan specializes in custom molded rubber, rubber molding, and rubber parts. Flexan provides vertically integrated molding services to the OEM marketplace in a wide variety of industries, including: automotive, military, aerospace, hearing aid, medical, micro precision, industrial controls, and food/water handling. Whether your application requires material development, design assistance, specific testing or extremely tight tolerances, their staff of professional chemists and engineers have the experience and expertise to develop and deliver your rubber part.

Low Cost Country SourcingWith facilities in both Chicago and China, the Flexan Corp. offers you the option of choosing what is best for your business. Both facilities have similar rubber molding capabilities and both offer engineering, project management, packaging, and supply chain services. Custom formulations to meet the specific needs of your application are available at both locations, as well as material development, sampling, and prototyping.

LOCATIONS:

ABOUT:

CAPABILITIES:

CERTIFICATIONS:

Flexan

For more information visit:www.flexan.com



18

For more information visit:www.websealinc.com

Web Seal

ABOUT:


• O-Rings in all standard & metric sizes• Dynamic Seals• Custom Die Cut & Gaskets• Assembly & Inventory Services• Bar Coding & Color Coding

• ISO 9001 Certified

Headquarters & Main Plant:15 Oregon Street, Rochester, NY 14605

Have a sealing application? Whether you want to seal contaminants out of your equipment – or contain fluids, particulates, gases, light, or noise – shield EMI/RFI – or have some unique application -- the seal technology you choose is critical to your success. Let Web Seal’s experts help with your design.

Web Seal specializes in: O-Rings, Custom Die Cuts & Gaskets and Dynamic Seals. Web Seal also provides a large assortment of products that perform in a wide range of other sealing applications, from expansion joints to fastener seals, quad rings to spliced O-rings, and pump packings to adhesives and RTVs. Related products such as O-ring kits, shims, spacers and tubing are also available.

LOCATIONS:

CAPABILITIES:

CERTIFICATIONS:

http://www.flexan.com

http://www.websealinc.com


"Tommy is always dedicated to helping his customers by uncovering all potential solutions and is never afraid to take on whatever needs to be done to provide a high level of service. Tommy helped me many time while I was working in a fast paste R&D Company. He spent countless hours finding quick turn solutions in precision fabrications while we were trying to get our product to market. I hope our paths will cross again in the future."~ Stacey Brink, Materials Manager "Tommy represents one of our suppliers and we are extremely pleased with the service we receive, the quality of the components, and the prompt delivery. He is always responsive to our requests and a pleasure to work with."~ Cindy Burnette, Purchasing Manager, Tessy Plastics, LLC. "Tommy is the kind of person you want in front of new & existing customers. He represents our company in a very professional way."~ Glenn Berry, President, JMC Tool and Machine "Garnett Component Sales is the best manufacturer's rep I deal with. He is very dedicated to finding me a source when I need an item I have not been able to procure on my own. He continually provides feedback and follows up on all open items until they are resolved. He is easy to reach and easy to deal with."~ Barbara Tuck, Purchasing Agent, Dill Air Control Products "I believe the most cost effective way to market your products in this very competitive manufacturing arena is through the services of experienced, relationship oriented, market and result focused manufacturing reps. For the past thirty years our company has successfully selected representatives and Tommy Garnett of Garnett Component Sales is our latest addition. We have been excited to have him on our staff because in less than six months he has strategically built an effective marketing campaign, secured new business, and exhibits an excitement that permeates through our organization. We are looking forward to a long lasting relationship and are happy to have Tommy aboard."~ Mark H. Yessian, President, AAA Industries Inc. "It has been my pleasure to work with Garnett Component Sales since 1996. The service they provide is outstanding and the principals that they represent are first class in the industry. Mr. Garnett brings a professional and ethical attitude with him at all times. You can place your trust in them to provide you the service that is expected."~ Wally Jones, Supply Chain Specialist, Pentair Pool Products "GCS has provided Flexan Corporation with excellent representation in NC and SC for over 9 years. Tommy is a committed, ethical individual who I have greatly enjoyed working with. GCS represents their principals and customers with respect and passion."~ Brian Barhorst, Flexan Corporation "GCS has represented JMC Tool and Machine since 2000 and has been instrumental in advancing our goals of growth and market expansion. GCS has opened many new doors for JMC and our customers pay them the highest compliments."~ Howard Nystrom, Co-Owner, JMC Tool and Machine "Working with Tommy Garnett and Garnett Component Sales has been a very positive experience for everyone at Web Seal. GCS is tenacious in searching for the best solution to their customers' problems. At a personal level, Tommy conducts himself in a highly professional and ethical manner. Continuing to build our relationship with GCS is one of our key growth strategies."~ John Hurley, President, Web Seal, Inc. "Since we've been working with Garnett Component Sales, I've continued to be impressed. We've had a very interactive relationship which has led to bottom line results – for both of us. Successful business is based on planning and execution, and Tommy Garnett's organization has shown this is a core competence."~ Gary Ball, General Manager, Fischer Special Mfg., Co.

Testimonials Representative Sample Of Customers Served

"Tommy is always dedicated to helping his customers by uncovering all potential solutions and is never afraid to take on whatever needs to be done to provide a high level of service. Tommy helped me many time while I was working in a fast paste R&D Company. He spent countless hours finding quick turn solutions in precision fabrications while we were trying to get our product to market. I hope our paths will cross again in the future."~ Stacey Brink, Materials Manager "Tommy represents one of our suppliers and we are extremely pleased with the service we receive, the quality of the components, and the prompt delivery. He is always responsive to our requests and a pleasure to work with."~ Cindy Burnette, Purchasing Manager, Tessy Plastics, LLC. "Tommy is the kind of person you want in front of new & existing customers. He represents our company in a very professional way."~ Glenn Berry, President, JMC Tool and Machine "Garnett Component Sales is the best manufacturer's rep I deal with. He is very dedicated to finding me a source when I need an item I have not been able to procure on my own. He continually provides feedback and follows up on all open items until they are resolved. He is easy to reach and easy to deal with."~ Barbara Tuck, Purchasing Agent, Dill Air Control Products "I believe the most cost effective way to market your products in this very competitive manufacturing arena is through the services of experienced, relationship oriented, market and result focused manufacturing reps. For the past thirty years our company has successfully selected representatives and Tommy Garnett of Garnett Component Sales is our latest addition. We have been excited to have him on our staff because in less than six months he has strategically built an effective marketing campaign, secured new business, and exhibits an excitement that permeates through our organization. We are looking forward to a long lasting relationship and are happy to have Tommy aboard."~ Mark H. Yessian, President, AAA Industries Inc. "It has been my pleasure to work with Garnett Component Sales since 1996. The service they provide is outstanding and the principals that they represent are first class in the industry. Mr. Garnett brings a professional and ethical attitude with him at all times. You can place your trust in them to provide you the service that is expected."~ Wally Jones, Supply Chain Specialist, Pentair Pool Products "GCS has provided Flexan Corporation with excellent representation in NC and SC for over 9 years. Tommy is a committed, ethical individual who I have greatly enjoyed working with. GCS represents their principals and customers with respect and passion."~ Brian Barhorst, Flexan Corporation "GCS has represented JMC Tool and Machine since 2000 and has been instrumental in advancing our goals of growth and market expansion. GCS has opened many new doors for JMC and our customers pay them the highest compliments."~ Howard Nystrom, Co-Owner, JMC Tool and Machine "Working with Tommy Garnett and Garnett Component Sales has been a very positive experience for everyone at Web Seal. GCS is tenacious in searching for the best solution to their customers' problems. At a personal level, Tommy conducts himself in a highly professional and ethical manner. Continuing to build our relationship with GCS is one of our key growth strategies."~ John Hurley, President, Web Seal, Inc. "Since we've been working with Garnett Component Sales, I've continued to be impressed. We've had a very interactive relationship which has led to bottom line results – for both of us. Successful business is based on planning and execution, and Tommy Garnett's organization has shown this is a core competence."~ Gary Ball, General Manager, Fischer Special Mfg., Co.

Testimonials Representative Sample Of Customers Served

©2014 Garnett Component Sales, Inc. Garnett Components Sales and the GCS logo are registered trademarks of Garnett Component Sales, Inc.All other product names and logos are trademarks of their respective manufacturers. 7/14

Powered by TCPDF (www.tcpdf.org)

http://www.tcpdf.org

Date post:	06-Aug-2015
Category:	Documents
Upload:	tommy-garnett
View:	62 times
Download:	1 times

gcs-2015-line-card-booklet

Documents