G.E Device Summary for Frame 9E

GRD

A4

IM-2011005753

29/08/2011 31/08/2011 31/08/2011

392A8431

HELFER THOMAS PAQUES DIDIER PANAROTTO ELVIO

PANAROTTO ELVIOPAQUES DIDIERHELFER THOMAS

CHEN

UT B

RIG

ITTE

VALI

DE

X

NOMENCLATURE.APP.CONTROLE

DEVICE SUMMARY

C

05-J

an-2

012-

12:4

9

DT-1C

GE Of

ficial

FOR E

XECU

TION U

NIT H4

5 TO H

48

SIZE DWG NO SH REV

A4 392A8431 1 C TBFT-TMP-FR-GTE-0060- Rev : 001

Ce document, proprit exclusive de

GE Energy Products France SNC est strictement confidentiel. Il ne peut tre communiqu, copi ou

reproduit sans notre autorisation crite pralable.

This document, exclusive property of GE Energy Products France SNC is strictly confidential.

It must not be communicated, copied or reproduced without our prior written consent.

First made for : 9171E ITEM : 0414

UNLESS OTHERWISE SPECIFIED NAMES DATE

DIMENSIONS ARE IN MM [INCHES]

TOLERANCES ON:

1 [2] PL DECIMALS +

2 [3] PL DECIMALS +

ANGLES +

FRACTIONS +

DRAWN

T. Helfer 13/10/09

CHECKED

D. Pques 13/10/09

APPROVED

P. Janin 13/10/09

NOMENCLATURE DES APPAREILS DE CONTROLE

DIAGRAM. SCHEMA. P.P. DEVICE SUMMARY

WEIGHT : 0000 kg SIZE A4

CAGE CODE

DWG NO

392A8431 INDEX SCALE SHEET 1/1

Doc. Source : TBFT-ISP-FR-GTE-0020

Attention : Dont modify this document without any update of the database P414. Attention : Ne pas modifier ce document sans mise jour de la base P414.

ISO PROJECTION

EACH SECTION SHALL BE REVISED IN ITS ENTIRETY. ALL SHEETS OF EACH SECTION ARE THE SAME REVISION LEVEL AS INDICATED IN THE REVISION BLOCK

SECTION NO. OF SHEETS

REV

INDEX 1 C 01EN 28 C 01FR 28 C

REVISIONS REV DESCRIPTION NAMES DATE SIGNATURES

A First issue T. Helfer

13/10/2009

D. Pques P. Janin

B IM-2010005556 T. Helfer

16/09/2010

D. Pques P. Kleinprintz

C IM-2011005753 (DCI 11019816)

T. Helfer 26/08/2011

D. Pques E. Panarotto

DT-1CDT-1CDT-1C

SIZE DWG NO SH REV

A4 392A8431 1 C TBFT-TMP-FR-GTE-0060 Rev : 001

SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN

SCALE SHEET 1/ 28 Doc. Source : TBFT-ISP-FR-GTE-0020

Ce document, proprit exclusive de GE Energy Products France SNC est strictement confidentiel Il ne peut tre communiqu, copi ou reproduit sans notre autorisation crite pralable.

This document, exclusive property of GE Energy Products France SNC. is strictly confidential. It must not be communicated, copied or reproduced without our previous written consent.

REVISIONS

Rev

Description

A First issue

B - P&ID 0471 : Number change : 227D1412 instead of 219D2887 - P&ID 0462 : characteristics modification of devices 33WN-8, 90WN-1 and VPR62-1

C P&ID 0422 : Max. stroke tolerance modification of valve VSR-1.

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




PRESSURE : All pressures are gauge pressure, abs means absolute pressure.

Abbreviations Descriptions AA Atomizing Air

ACF Control Filter Downstream Pressure AD Compressor Discharge Air AE Extraction Air

AMF Lube Oil Filter Downstream Pressure DEC. Decreasing DPDT Double pole, double throw DPG Differential Pressure Gauge FC Fail safe to close FO Fail open GF Gas Fuel

GFV Gas Fuel Vent GPL Gas Valve Stem Packaging Leakoff INC. Increasing LVDT Linear variable differential transformer

MLI Model List Item : four digit code used by General Electric to identify components, assembly, drawings or specifications, example : MLI 0414 for Device Summary

NC Normally closed NO Normally open

Normal Means absolute zero energy level, such as no power, no oil, no speed, no temperature

OD Oil Drain OD

Oil drain above oil tank level

OD

Oil drain below oil tank level

OH Control Oil High Pressure OHT Trip Oil High Pressure OL Lube Oil

OLV Lube Oil Event OR Regulated Lube Oil PC Piping connecting point

Safety Safety Integrity Level (a cross means the device belong to a safety loop related to personnel safety). Do not modify devices or settings of any safety loop.

Slope The arrow direction indicates the liquid gravitational drainage due to the slope SPDT Single pole, double throw SPST Single pole, single throw WD Water Drain WF Water Feed WR Water Return

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




Wiring diagram Description

ACCY The device is in the accessories wiring diagram (MLI 401A)

AIR The device is in the cooling fan module wiring diagram (MLI A132)

AIR DRY The device is in the air dryer module wiring diagram (MLI 1049)

CHROM The device is in the chromatograph module wiring diagram (MLI G023)

CLEAN The device is in the cleaning module wiring diagram (MLI E026)

CO2 The device is in the CO2 fire protection module wiring diagram (MLI A068)

ENCL-G The device is in the gas enclosure interface drawing (MLI 1195)

ENCL-LF The device is in the liquid fuel / atomizing air / water injection module enclosure interface drawing (MLI 1152)

ENCL-LO The device is in the lube oil / fuel gas module enclosure interface drawing (MLI 1137)

ENCL-T The device is in the turbine enclosure interface drawing (MLI 1113)

ENCL-V The device is in the ventilation enclosure interface drawing (MLI 1643)

ENCL-WI The device is in the water injection enclosure interface drawing (MLI 1196)

FILT The device is in the air filter wiring diagram (MLI A040)

FG-SSOV The device is in the fuel gas, SSOV & vent module wiring diagram (MLI G064)

GAS The device is in the gas module wiring diagram (MLI 0991 or 401G)

GAS HEAT The device is in the gas heating and treatment system wiring diagram (MLI G025)

GENE The device is in the generator wiring diagram

IBH The device is in the bleed heating wiring diagram (MLI A037)

LF-AA The device is in the liquid fuel / atomizing air module wiring diagram (MLI A162)

LF-AA-WI The device is in the liquid fuel / atomizing air / water injection module wiring diagram (MLI A162)

LF-SR The device is in the liquid fuel recirculation skid wiring diagram (MLI 969S)

LF-TR The device is in the liquid fuel treatment skid wiring diagram (MLI E020)

LF-FD The device is in the liquid fuel flow devider wiring diagram (MLI 0613)

LF-H The device is in the liquid fuel heater wiring diagram (MLI E041)

LF-TPH The device is in the liquid fuel transfert pump&heating skid wiring diagram (MLI E047)

LF-PH The device is in the liquid fuel pump&heating skid wiring diagram (MLI A245)

LF-FT-PR The device is in the liquid fuel flow totalizer & pression regulation skid wiring diagram (MLI A246)

LO FG The device is in the lube oil / fuel gas module wiring diagram (MLI A160)

LOAD The device is in the load gear wiring diagram (MLI A012)

MIST The device is in the mist eliminator outline drawing (MLI A098)

OIL The device is in the lube oil wiring diagram (MLI 0990 or 401H)

STEAM The device is in the steam injection module wiring diagram (MLI A135)

TURB The device is in the gas turbine wiring diagram (MLI 401T)

TURN-GEAR The device is in the turning gear wiring diagram (MLI A073)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




VAN The device is in the additive injection vanadium module wiring diagram (MLI E021)

WASH The device is in the water washing module wiring diagram (MLI E025)

WI The device is in the water injection module wiring diagram (MLI A035)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




System Name MLI

P&ID System Reference Rev

Control Devices Turbine System 0415 CD 227D1199 A

Lube Oil System 0416 LO 227D1331 F

Cooling and Sealing Air System 0417 CSA 219D2331 C

Instrument Air System 0419 APU N/A

Cooling Water System 0420 CW 219D2889 D

Starting Means System 0421 SM 205D4866 C

Gas Fuel System 0422 GF 227D1390 C

Liquid Fuel System 0424 LF 227D1347 E

Atomizing Air System 0425 AA 227D1078 D

Fire Protection System 0426 FP 219D2715 B

PP Station Air System 0428 AE N/A

Steam Injection System 0431 SI N/A

Inlet Air heating System 0432 IAR N/A

Hydraulic Supply System 0434 HS 209D7043 C

Heating and Ventilation System 0436 HV 219D2734 C

Turbine and Compressor Cleaning System 0441 TCC 227D1308 A

Turbine and Compressor Washing System 0442 TCW 219D1293 C

Water Injection System 0462 WI 227D1360 A

Compressor Inlet Guide Vanes System 0469 IGV 219D1732 A

Flow Inlet and Exhaust System 0471 IE 227D1412 A

Gas Detection System 0474 GD 209D7635 A

Fuel Purge System 0477 FPU 219D1141 B

Gas Fuel Process System 0482 GFPS N/A

Nitrogen Injection System 0491 NI N/A

Performance Monitor System 0492 PM 214D1258 C

Additive Injection Skid System 0494 LFAD 219D1937 B

Interconnections lines System 0969 IL N/A

Fuel Gas Filtration and Stop Valve G044 GFF N/A

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring

Diagram Safety Designation

0425 20AA-18 918T TURB Solenoid valve for VA18-1 control Characteristics : Normal : 1 to 3 open ; 2 closed | 0.035 kW | 125 VDC

0425 20AB-1 0922 ACCY Solenoid valve for VA22-1 control Characteristics : Normal : 1 to 3 open ; 2 closed | 0.035 kW | 125 VDC

0417 20CB-1 1071 TURB Compressor bleed solenoid valve Characteristics : Normal : B to C Open, A closed | 0.04 kW | 125 VDC

0424 20CF-1 0510 ACCY Fuel pump clutch solenoid Characteristics : Normal : NO | 125 VDC | 0.16 kW (max)

0422 20FGC-1 0509 GAS Trip solenoid valve for gas control valve (VGC-1) Characteristics : Normal : NO | 0.0156 kW | 125 VDC

0422 20FGS-1 0507 GAS Fuel gas stop valve solenoid valve Characteristics : Normal : NO | 0.0156 kW | 125 VDC

0424 20FL-1 0511 ACCY Liquid fuel stop valve solenoid Characteristics : Normal : NC | 0.02 kW | 125 VDC

0494 20IA-31 E021/E0

48 VAN

Solenoid valve command the VA99-32 valve Characteristics : Normal : 1 to 2 closed | 12 W | 125 VDC

0441 20KF E026 CLEAN Motor valve cleaning skid Characteristics : 230 VAC | Normal : NC | 50 hz | 0.045 kW

0441 20KF/PB E026 CLEAN Cleaning skid push button

0424 20PF-100 0961 TURB Purge fuel liquid solenoid valve Characteristics : Normal : A to P open. B closed | 40 W | 125 VDC

0477 20PG-1 0991 GAS

Solenoid valve for VA13-1 control Characteristics : Normal : 1 to 3 open ; 2 closed | 0.035 kW | 125 VDC Settings : A needle-valve is installed upstream of 20PG-1 in order to adjust VA13-1 time

opening at 30 seconds

0477 20PG-2 0991 GAS Solenoid valve for VA13-2 control Characteristics : Normal : 1 to 3 open ; 2 closed | 0.035 kW | 125 VDC

0477 20PL-1 918T TURB Solenoid valve for VA19-1 control Characteristics : Normal : 1 to 3 open ; 2 closed | 0.035 kW | 125 VDC

0421 20TU-1 0605 ACCY Torque converter fill / drain solenoid valve Characteristics : Normal : NC

0469 20TV-1 0548 TURB Solenoid valve for compressor IGV trip system Characteristics : Normal : NO | 0.1 kW | 125 VDC

0442 20TW-1 0953 TURB Motor valve off-line compressor water wash Characteristics : 230 VAC | Normal : NC | 50 hz | 0.072 kW

0442 20TW-2 0983 TURB Motor valve turbine water wash Characteristics : 230 VAC | Normal : NC | 50 hz | 0.23 kW

0442 20TW-3 0953 TURB Motor valve on-line compressor water wash Characteristics : 230 VAC | Normal : NC | 50 hz | 0.072 kW

0422 20VG-1 0991 GAS Fuel gas vent solenoid valve Characteristics : Normal : NO | 0.009 kW | 125 VDC

0477 20VG-2 0991 GAS Gas fuel purge vent solenoid valve Characteristics : Normal : NO | 0.125 kW | 125 VDC

0462 20WN-1 A035 WI Water injection stop valve solenoid valve Characteristics : Normal : NO | 0.0112 kW | 125 VDC

0462 20WN-2 A035 WI Water injection stop valve solenoid valve (part of VS2-2) Characteristics : Normal : NO | 0.0112 kW | 125 VDC

0420 20WN-30 0963 TURB Solenoid valve for fuel check valves cooling water Characteristics : Normal : NO | 0.0112 kW | 125 VDC

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0425 23AB-1 1047 ACCY Anti-condensation heater for motor 88AB-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

0436 23BT-1 1605 ENCL-T Anti-condensation heater for motor 88BT-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

0436 23BT-2 1605 ENCL-T Anti-condensation heater for motor 88BT-2 Characteristics : 50 hz | 230 VAC | 0.05 kW

0421 23CR-1 0603 ACCY Anti-condensation heater for motor 88CR-1 Characteristics : 50 hz | 230 VAC | 0.18 kW



0436 23HA-11 1658 ENCL-G Gas compartment heater Characteristics : 50 hz | 400 VAC | 3.9 kW

0436 23HA-12 1658 ENCL-G Gas compartment air inlet heater Characteristics : 50 hz | 400 VAC | 15 kW





0436 23HA-30 1113 ENCL-T Auxiliaries compartment heater Characteristics : 50 hz | 400 VAC | 15 kW

0434 23HQ-1 0628 ACCY Anti-condensation heater for motor 88HQ-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

0436 23HT-30 1113 ENCL-T Turbine compartment heater Characteristics : 50 hz | 400 VAC | 20 kW

0416 23QA-1 1006 ACCY Anti-condensation heater for motor 88QA-1 Characteristics : 50 hz | 230 VAC | 0.1 kW

0416 23QT-1 0938 ACCY Immersion heater lube oil tank Characteristics : 50 hz | 400 VAC | 13.0 kW

0416 23QT-2 0938 ACCY Immersion heater lube oil tank Characteristics : 50 hz | 400 VAC | 13.0 kW

0416 23QV-1A A098 MIST Anti-condensation heater for motor 88QV-1A Characteristics : 50 hz | 230 VAC | 0.05 kW

0421 23TG-1 0603 ACCY Anti-condensation heater for motor 88TG-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

0417 23TK-1 1233 ACCY Anti-condensation heater for motor 88TK-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

0417 23TK-2 1233/A

132 ACCY

Anti-condensation heater for motor 88TK-2 Characteristics : 50 hz | 230 VAC | 0.05 kW

0436 23VG-1 1605 ENCL-T Anti-condensation heater for motor 88VG-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

0436 23VG-2 1605 ENCL-T Anti-condensation heater for motor 88VG-2 Characteristics : 50 hz | 230 VAC | 0.05 kW

0462 23WN-1 A035 WI Anti-condensation heater for motor 88WN-1 Characteristics : 50 hz | 230 VAC | 0.05 kW

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0436 23WR-30 1196 ENCL-WI Water injection skid enclosure heater Characteristics : 50 hz | 400 VAC | 9 kW

0471 27TF-1 A040 FILT GT air filter general alarm dispatching

0415 28FD-10 1121 TURB Flame detector combustion chamber n10




0415 30SG-1 1213 TURB Ignition transformer alarm relay Characteristics : Normal : NO

0436 33BT-1 1605 ENCL-T GT compartment ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0436 33BT-2 1605 ENCL-T GT compartment ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0417 33CB-1 1022 TURB Bleed valve limit switch (11th stage) Characteristics : Normal : NO Settings : Valve opened : limit switch activated, contact closed




0436 33DT-1 1605 ENCL-T Auxiliaries compartment door limit switch Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-11 1658 ENCL-G Load compartment door limit switch gas compartment Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-12 1658 ENCL-G Load compartment door limit switch gas compartment Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-13 1658 ENCL-G Gas compartment door limit switch Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-14 1658 ENCL-G Gas compartment door limit switch Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-2 1605 ENCL-T Auxiliaries compartment door limit switch Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-3 1605 ENCL-T Turbine compartment door limit switch Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

0436 33DT-4 1605 ENCL-T Turbine compartment door limit switch Characteristics : Normal : NO Settings : Door closed : limit switch activated, contact closed

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0424 33FL-1 0511 ACCY Liquid fuel stop valve limit switch Characteristics : Normal : NO Settings : Valve closed : limit switch activated, contact closed

0436 33JS-1 1659 ENCL-WI Water injection skid enclosure : ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0436 33JS-2 1659 ENCL-WI Water injection skid enclosure : ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0441 33KF-1 E026 CLEAN Cleaning skid valve limit switch Characteristics : Normal : NO Settings : Valve closed : limit switch activated, contact closed

0441 33KF-2 E026 CLEAN Cleaning skid valve limit switch Characteristics : Normal : NO Settings : Valve opened : limit switch activated, contact closed

0424 33PF-1 0961 TURB Purge fuel liquid valve limit switch VP-1 Characteristics : Normal : NO Settings : Valve closed : limit switch activated, contact closed

0477 33PG-1 0991 GAS VA13-1 close position limit switch Characteristics : Normal : NO Settings : Valve closed : limit switch activated, contact closed

0477 33PG-2 0991 GAS VA13-1 open position limit switch Characteristics : Normal : NO Settings : Valve opened : limit switch activated, contact closed

0477 33PG-3 0991 GAS VA13-2 close position limit switch Characteristics : Normal : NO Settings : Valve closed : limit switch activated, contact closed

0477 33PG-4 0991 GAS VA13-2 open position limit switch Characteristics : Normal : NO Settings : Valve opened : limit switch activated, contact closed

0421 33TC-1 0605 ACCY Torque converter solenoid valve limit switch Characteristics : Normal : NO Settings : 20TU-1 de-energized : switch activated, contact closed

0442 33TFD-1 1026 TURB False start drain valve limit switch Characteristics : Normal : NO Settings : Valve opened : limit switch activated, contact closed

0421 33TM-5 0605 ACCY Torque converter low torque limit switch Characteristics : Normal : NO, switch closed for IGV closed or max torque Settings : Setup at 3 tr of handwheel (full scale 0-242 tr)

0421 33TM-6 0605 ACCY Torque converter high torque limit switch Characteristics : Normal : NO, switch closed for IGV closed or max torque Settings : Setup at 242 tr of handwheel (full scale 0-242 tr)

0436 33VG-1 1605 ENCL-T Load compartment ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0422 33VG-11 0991 GAS Gas system vent valve limit switch Characteristics : Normal : NO Settings : Valve closed : limit switch activated, contact closed

0436 33VG-2 1605 ENCL-T Load compartment ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0436 33VL-1 1658 ENCL-G Gas compartment ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0436 33VL-2 1658 ENCL-G Gas compartment ventilation damper limit switch Characteristics : Normal : NO Settings : Flap closed : limit switch activated, contact closed

0462 33WN-1 A035 WI Water injection control valve limit switch (part of VC4-1) Characteristics : Normal : NO Settings : Valve full opened : limit switch activated, contact closed

0462 33WN-2 A035 WI Water injection control valve limit switch (part of VC4-1) Characteristics : Normal : NO Settings : Valve full closed : limit switch activated, contact closed

0462 33WN-3 A035 WI Water injection stop valve limit switch (part of VS2-1) Characteristics : Normal : NO Settings : Valve full opened : limit switch activated, contact closed

0462 33WN-4 A035 WI Water injection stop valve limit switch (part of VS2-1) Characteristics : Normal : NO Settings : Valve full closed : limit switch activated, contact closed

0462 33WN-7 A035 WI Water injection stop valve limit switch (part of VS2-2) Characteristics : Normal : NO Settings : Valve full opened : limit switch activated, contact closed

0462 33WN-8 A035 WI Water injection stop valve limit switch (part of VS2-2) Characteristics : Normal : NO Settings : Valve full closed : limit switch activated, contact closed

0415 39V-1A 1218 TURB Vibration sensor Characteristics : For 25.4 mm/s (1 in/s), 150 7.5 mV peak

0415 39V-1B 1218 TURB Vibration sensor Characteristics : For 25.4 mm/s (1 in/s), 150 7.5 mV peak



0415 39V-3B 1218 TURB Vibration sensor Characteristics : For 25.4 mm/s (1 in/s), 150 7.5 mV peak

0415 39V-CC 1218 TURB Compressor casing accelerometer Characteristics : 1.02 mV/m/s2 (10 mV/g) 5% 3.94 mV/mm/s 5%

0415 39VS-11 235A TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

0415 39VS-12 235A TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

0415 39VS-21 235B TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)




SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0415 39VS-31 235C TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

0415 39VS-32 235C TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

0426 43CP-1 1113 ENCL-T Break glass unit auxiliaries compartment access door Characteristics : Normal : NO

0426 43CP-2 1113 ENCL-T Break glass unit GT compartment access door Characteristics : Normal : NO

0426 43CP-3 1153 ENCL-T Break glass unit auxiliaries compartment access door Characteristics : Normal : NO

0426 43CP-4 1113 ENCL-T Break glass unit GT compartment access door Characteristics : Normal : NO

0426 43CP-5 1113 ENCL-T Break glass unit load compartment access door Characteristics : Normal : NO

0426 43CP-6 1195 ENCL-G Break glass unit gas compartment access door Characteristics : Normal : NO

0426 43CP-7 1195 ENCL-G Break glass unit gas compartment access door Characteristics : Normal : NO

0442 43TW-1/PB 1105 TURB Off-line water wash push button Characteristics : Normal : NO

0442 43TW-2/PB 1105 TURB Turbine water wash push button Characteristics : Normal : NO

0426 45FA-10A 1113 ENCL-T Thermostatic fire detector auxiliaries compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-10B 1113 ENCL-T Thermostatic fire detector auxiliaries compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)







0426 45FA-1A 1104 ACCY Thermostatic fire detector auxiliaries compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0426 45FA-1B 1104 ACCY Thermostatic fire detector auxiliaries compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-2A 1104 ACCY Thermostatic fire detector auxiliaries compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-2B 1104 ACCY Thermostatic fire detector auxiliaries compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-6A 0991 GAS Thermostatic fire detector gas compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-6B 0991 GAS Thermostatic fire detector gas compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-7A 0991 GAS Thermostatic fire detector gas compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FA-7B 0991 GAS Thermostatic fire detector gas compartment Characteristics : Normal : NO Settings : Closed : 163 14C (325 25F)

0426 45FT-1A 1103 TURB Thermostatic fire detector GT compartment Characteristics : Normal : NO Settings : Closed : 316 14C (600 25F)

0426 45FT-1B 1103 TURB Thermostatic fire detector GT compartment Characteristics : Normal : NO Settings : Closed : 316 14C (600 25F)





0426 45FT-8A 1160 TURB Thermostatic fire detector load compartment Characteristics : Normal : NO Settings : Closed : 385 14C (725 25F)

0426 45FT-8B 1160 TURB Thermostatic fire detector load compartment Characteristics : Normal : NO Settings : Closed : 385 14C (725 25F)

0426 45FT-9A 1160 TURB Thermostatic fire detector load compartment Characteristics : Normal : NO Settings : Closed : 316 14C (600 25F)

0426 45FT-9B 1160 TURB Thermostatic fire detector load compartment Characteristics : Normal : NO Settings : Closed : 316 14C (600 25F)

0474 45HA-4 1658 ENCL-G Gas detector gas module compartment ventilation duct Characteristics : Range : 0 - 20% LEL

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring




0474 45HT-1 1113 TURB Gas detector turbine compartment Characteristics : Range : 0 - 20% LEL



0474 45HT-4 1605 ENCL-T Gas detector turbine compartment turbine compartment ventilation duct Characteristics : Range : 0 - 20% LEL

0474 45HT-5 1605 ENCL-T Gas detector turbine compartment ventilation duct Characteristics : Range : 0 - 20% LEL

0474 45HT-6 1605 ENCL-T Gas detector turbine compartment ventilation duct Characteristics : Range : 0 - 20% LEL

0436 49HA-12 1658 ENCL-G Security thermostat gas compartment heater Characteristics : Normal : NO Settings : Closed at 100 +0/-16C (212 +0/-61F)

0426 5E-10 1113 ENCL-T Emergency stop button located at auxiliary compartment outside GT compartment Characteristics : Normal : NC

0426 5E-11 1113 ENCL-T Emergency stop button located at auxiliary compartment outside GT compartment Characteristics : Normal : NC

0494 63AF-31 E021/E0

48 VAN

Pressure switch of the air circuit Characteristics : Normal : NC Settings : Increase open at : 3 0.25 bar (43.5 4 psi)

0471 63CA-1 A040 FILT

GT compressed air inlet filter low pressure switch Characteristics : Normal : NO Settings : Not adjustable : increase close at : 6 0.5 bar (87 7.25 psi) | Decrease open at : 5.5 0.5 bar (79.77 7.25 psi)

0422 63FG-1 0991 GAS

Gas fuel pressure switch Characteristics : Normal : NC Settings : Decrease close at : 1.03 0.05 bar (15.0 0.75 psi) | Not adjustable : increase open at : 2.41 0.05 bar (35.0 0.75 psi)

0422 63FG-2 0991 GAS

Gas fuel pressure switch Characteristics : Normal : NC Settings : Decrease close at : 1.03 0.05 bar (15.0 0.75 psi) | Not adjustable : increase open at : 2.41 0.05 bar (35.0 0.75 psi)

0424 63FL-2 0992 ACCY

Liquid fuel pressure switch Characteristics : Normal : NO Settings : Not adjustable : increase closed at : 2.75 0.14 bar (40 2 psi) | Decrease open at : 2.41 0.07 bar (35 1 psi)

0434 63HF-1 0926 ACCY

Hydraulic filter differential pressure alarm Characteristics : Normal : NC Settings : Not adjustable : decrease close at : 2.75 1.03 bar (40 15 psi) | Increase open at : 4.13 0.2 bar (60 3 psi)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0434 63HQ-1 0926 ACCY

Low hydraulic supply pressure auxiliary hydraulic pump start Characteristics : Normal : NO Settings : Not adjustable : increase close at : 100 3.1 bar (1450 45 psi) | Decrease open at : 93 1.7 bar (1350 25 psi)

0441 63KJ E026 CLEAN Cleaning skid pressure switch Characteristics : Normal : NC Settings : Increase open at : 1 0.1 bar (14.5 1.5 psi)

0424 63LF-7 0992 ACCY

Fuel filter differential pressure alarm Characteristics : Normal : NC Settings : Not adjustable : decrease close at : 1.1 0.07 bar (16 1 psi) | Increase open at : 1.3 0.07 bar (19 1 psi)

0477 63PG-1 0991 GAS

Pressure switch on VA13-1 & VA13-2 intervalves space Characteristics : Normal : NC Settings : Not adjustable : decrease close at : 3.17 0.21 bar (46 3 psi) | Increase open at : 3.45 0.14 bar (50 2 psi)

0477 63PL-21 918T TURB

Pressure switch on liquid fuel purge air Characteristics : Normal : NO Settings : Not adjustable : increase close at : 6 0.3 bar (87 4 psi) | Decrease open at : 4.6 0.3 bar (67 4 psi)

0416 63QA-2 0926 ACCY

Low lube oil pressure alarm Characteristics : Normal : NO Settings : Not adjustable : increase close at : 3.1 0.14 bar (45 2 psi) | Decrease open at : 2.8 0.07 bar (40.6 1 psi)

0416 63QQ-21 0940 ACCY

Main lube oil filter differential pressure switch Characteristics : Normal : NC Settings : Not adjustable : decrease close at : 0.9 0.2 bar (13 3 psi) | Increase open at : 1.03 0.068 bar (15 1 psi)

0416 63QQ-22 0940 ACCY

Main lube oil filter differential pressure switch Characteristics : Normal : NC Settings : Not adjustable : decrease close at : 0.9 0.2 bar (13 3 psi) | Increase open at : 1.03 0.068 bar (15 1 psi)

0416 63QQ-8 0916 ACCY

Torque converter filter differential pressure Characteristics : Normal : NC Settings : Increase open at : 1.5 0.2 bar (21.75 3 psi)

0416 63QT-2A ALT. GENE

Generator bearing low lube oil pressure Characteristics : Normal : NO Settings : Not adjustable : increase close at : 0.62 0.035 bar (9 0.5 psi) | Decrease open at : 0.55 0.021 bar (8 0.3 psi)

0471 63TF-10A A040 FILT Differential pressure switch between air inlet and hoods Characteristics : Normal : NC Settings : Increase open at : 3 0.2 mbar (0.04 0.003 psi)

0471 63TF-10B A040 FILT Differential pressure switch between air inlet and hoods Characteristics : Normal : NC Settings : Increase open at : 3 0.2 mbar (0.04 0.003 psi)

0471 63TF-2A A040 FILT

GT inlet air system differential pressure switch Characteristics : Normal : NC Settings : Increase open at : 21 0.5 mbar (0.3 0.007 psi)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0471 63TF-2B A040 FILT

GT inlet air system differential pressure switch Characteristics : Normal : NC Settings : Increase open at : 21 0.5 mbar (0.3 0.007 psi)

0417 63TK-1 A053/A

132 ACCY

Turbine exhaust frame cooling pressure switch Characteristics : Normal : NO Settings : Closed above 381 19 mm H2O (15 0.75 in H2O)

0417 63TK-2 A053/A

132 ACCY

Turbine exhaust frame cooling pressure switch Characteristics : Normal : NO Settings : Closed above 381 19 mm H2O (15 0.75 in H2O)

0462 63WN-1 A035 WI Water injection pressure switch Characteristics : Normal : NC Settings : Open on decreasing pressure / atm : -0.270 0.01 bar (-3.9 0.14 psi)

0462 63WN-2 A035 WI Water injection pressure switch Characteristics : Normal : NO Settings : Open on decreasing pressure : 25 bar (363 psi)

0462 63WN-3 A035 WI Water injection differential pressure switch on water injection pump filter Characteristics : Normal : NC Settings : Open on increasing differential pressure : 1.03 bar 0.1 bar (15 1 psi)

0424 65FP 0533 ACCY Liquid fuel pump (by pass valve) servo valve

0422 65GC-1 0509 GAS Gas control valve servo valve (VGC-1)

0494 71FA-31 E021/E0

48 VAN

Level switch in the tank 501BA Characteristics : Normal : NO Settings : Opening on low level

0494 71FA-32 E021/E0

48 VAN

Level switch in the auxiliary tank Characteristics : Normal : NO Settings : Opening on low level

0424 71FF-4 969L TURB Fuel leakage detection pot level switch Characteristics : Normal : NC Settings : Opening on high level

0424 71FF-5 969L TURB Fuel leakage detection pot level switch Characteristics : Normal : NC Settings : Opening on high-high level

0424 71FF-6 969L TURB Fuel leakage detection pot level switch Characteristics : Normal : NC Settings : Opening on high-high level

0416 71QH-1 1038 ACCY High level lube oil tank Characteristics : Normal : NC Settings : Increase open on high level. See lube oil schematic MLI 416 for setting

0416 71QL-1 1038 ACCY Low level lube oil tank Characteristics : Normal : NO Settings : Decrease open on low level. See lube oil schematic MLI 416 for setting

0424 77FD-1 0910 ACCY Flow divider magnetic pickup-speed Settings : Gap : 0.23 0.025 mm (0.009 0.001 in)



0415 77HT-1 0546 TURB Speed sensor Settings : Gap : 1.27 0.127 mm (0.05 0.005 in)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring




0415 77NH-1 0546 TURB Speed sensor Settings : Gap : 1.27 0.127 mm (0.05 0.005 in)



0415 77RP-11 235A TURB Keyphasor, shaft end drive turbine side Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

0425 88AB-1 1047 ACCY Atomizing air booster motor Characteristics : 15 kW | 3000 rpm | 27.5A | 50 hz | 400 VAC

0436 88BT-1 1605 ENCL-T Cooling air fan motor - acoustical enclosure GT compartment Characteristics : 37 kW | - rpm | 50 hz | 400 VAC

0436 88BT-2 1605 ENCL-T Cooling air fan motor - acoustic enclosure GT compartment Characteristics : 37 kW | - rpm | 50 hz | 400 VAC

0421 88CR-1 0603 ACCY Electrical cranking motor Characteristics : 1000 kW | 3000 rpm | 50 hz | 6.6 kV

0494 88FA-30 E021/E0

48 VAN

Electric motor of PFA-30 pump Characteristics : 0.46 kW | 1500 rpm | 50 hz | 230 VAC

0494 88FA-31 E021/E0

48 VAN


0494 88FA-32 E021/E0

48 VAN


0424 88FM 0613 ACCY Flow divider starting motor Characteristics : 0.37 kW | 1400 rpm | 50 hz | 400 VAC

0434 88HQ-1 0628 ACCY Auxiliary hydraulic supply pump motor Characteristics : 15 kW | 1500 rpm | 28.2A | 50 hz | 400 VAC

0436 88JS-1 1659 ENCL-WI Water injection skid enclosure cooling air fan motor Characteristics : 0.37 kW | 1500 rpm | 50 hz | 400 VAC

0436 88JS-2 1659 ENCL-WI Cooling air fan motor water injection skid enclosure Characteristics : 0.37 kW | 1500 rpm | 50 hz | 400 VAC

0416 88QA-1 1006 ACCY Auxiliary lube oil pump motor Characteristics : 90 kW | 3000 rpm | 149,5A | 50 hz | 400 VAC

0416 88QE-1 1007 ACCY Emergency lube oil pump motor Characteristics : 9 kW | 1750 rpm | 89A | 125 VDC

0416 88QV-1A A098 MIST Lube oil mist eliminator motor Characteristics : 18.5 kW | 3000 rpm | 32.8A | 50 hz | 400 VAC

0421 88TG-1 0538 ACCY Turning gear electrical motor Characteristics : 30 kW | 750 rpm | 50 hz | 400 VAC

0417 88TK-1 1233/A

132 ACCY

Turbine exhaust frame cooling blower & motor Characteristics : 45 kW | 3000 rpm | 79A | 50 hz | 400 VAC

0417 88TK-2 1233/A

132 ACCY

Turbine exhaust frame cooling blower & motor Characteristics : 45 kW | 3000 rpm | 79A | 50 hz | 400 VAC

0421 88TM-1 0605 ACCY Torque adjuster drive motor Characteristics : 1.5 kW | 3000 rpm | 50 hz | 400 VAC

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0436 88VG-1 1605 ENCL-T Cooling air fan motor acoustic enclosure load compartment Characteristics : 18.5 kW | 1500 rpm | 50 hz | 400 VAC

0436 88VG-2 1605 ENCL-T Cooling air fan motor acoustic enclosure load compartment Characteristics : 18.5 kW | 1500 rpm | 50 hz | 400 VAC

0436 88VL-1 1658 ENCL-G Cooling air fan motor gas module acoustic enclosure Characteristics : 4 kW | 1500 rpm | 50 hz | 400 VAC

0436 88VL-2 1658 ENCL-G Cooling air fan motor gas module acoustic enclosure Characteristics : 4 kW | 1500 rpm | 50 hz | 400 VAC

0462 88WN-1 A035 WI Water injection pump motor Characteristics : 55 kW | 3000 rpm | 92.5 A | 50 hz | 400 VAC

0422 90SR-1 0507 GAS Gas speed ratio/stop valve servo valve

0469 90TV-1 0548 TURB Servovalve, compressor IGV actuator

0462 90WN-1 A035 WI

Electro-pneumatic converter Settings : 04 0.20 mA for 0 bar (0 psi) 20 0.20 mA for 2.6 bar (37.7 psi)

0436 95BT-1 1605 ENCL-T

Air flow control (anemometer) for turbine enclosure Characteristics : 04 - 20 mA for 0.5 - 30 m/s Settings : fan not running, 0% air flow : 4 -0/+1 mA fan running and doors closed : x1 mA, adjust the speedtronic constant software at a

value equivalent to { [60% * (x1 - 4) ] + 4 mA }

0436 95BT-2 1605 ENCL-T



0436 95BT-3 1605 ENCL-T



0415 95SG-13 1213 TURB Ignition transformer for 95SP-13 Characteristics : 0.15 kVA | 50 hz | 15 kV | 230 VAC

0415 95SG-14 1213 TURB Ignition transformer for 95SP-14 Characteristics : 0.15 kVA | 50 hz | 15 kV | 230 VAC

0415 95SP-13 1214 TURB Spark plug for combustion chamber n13

0415 95SP-14 1214 TURB Spark plug for combustion chamber n14

0436 95VL-1 1658 ENCL-G

Air flow control (anemometer) for gas skid enclosure Characteristics : 04 - 20 mA for 0.5 - 30 m/s Settings : fan not running, 0% air flow : 4 -0/+1 mA fan running and doors closed : x1 mA, adjust the speedtronic constant software at a


0436 95VL-2 1658 ENCL-G



0436 95VL-3 1658 ENCL-G



SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0425 96AA-4A 557T TURB

Atomizing air manifold pressure transmitter Settings : 04 0,05 mA for -1 bar (-14.5 psi) 20 0,1 mA for 35 bar (507.6 psi)

0425 96AA-4B 557T TURB


0425 96AA-4C 557T TURB


0425 96AD-1 0926 ACCY

Atomizing air main compressor differential pressure transmitter Settings : 04 0.02 mA for 0 bar (0 psi) 20 0.1 mA for 6 bar (87 psi)

0492 96AP-1A 0559 ACCY

Pressure transmitter Settings : 04 0.02 mA for 0.745 bar abs (22 in of Hg) 20 0.10 mA for 1.250 bar abs (36.9 in of Hg)

0492 96AP-1B 0559 ACCY


0492 96AP-1C 0559 ACCY


0492 96BD-1 0559 ACCY

Differential pressure transmitter between the air inlet of GT and the bell of GT intake Settings : 04 0.02 mA for 0.000 bar (0.000 in of H2O) 20 0.10 mA for 0.345 bar (138.5 in of H2O)

0417 96CD-1A 0557 ACCY

Compressor discharge pressure transmitter Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.05 mA for 21 bar (304.5 psi)

0417 96CD-1B 0557 ACCY


0417 96CD-1C 0557 ACCY


0492 96CS-1 0559 ACCY

Differential pressure transmitter between the air inlet of GT and the bell of GT intake Settings : 04 0.02 mA for 0 mbar 20 0.10 mA for 27.4 mbar (11 in of H2O)

0422 96FG-1 0991 GAS

Inlet gas fuel module pressure transmitter Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.1 mA for 34.5 bar (500 psi)

0422 96FG-2A 0991 GAS

Fuel gas inter-valve pressure transmitter Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.1 mA for 34.5 bar (500 psi)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0422 96FG-2B 0991 GAS


0422 96FG-2C 0991 GAS


0422 96GC-1,2 0509 GAS

Fuel gas control valve (VGC-1) LVDT Settings : 0.7 0.1 V = 0% open 3.5 0.5 V = 100% open

0416 96QA-2 0926 ACCY

Lube oil system VPR-2 inlet pressure transmitter Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.1 mA for 7 bar (101.5 psi)

0416 96QE-2 0926 ACCY

Emergency pump discharge pressure transmitter Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.1 mA for 2 bar (29 psi)

0416 96QT-2B ALT. GENE

Low lube oil pressure transmitter generator Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.1 mA for 1.72 bar (25 psi)

0416 96QV-1 0557 ACCY

Tank s air vacuum differential pressure transmitter Settings : 04 0.05 mA for 0 bar (0 psi) 20 0.1 mA for -15 mbarg (vacuum)

0471 96RH A040 FILT

Dew point and temperature transmitter Settings : Outlet 1 : 04 0.05 mA for -50C (-58 F) 20 0.05 mA for +50C (122 F) Outlet 2 : 04 0.05 mA for 0% RH 20 0.05 mA for 100 % RH

0422 96SR-1,2 0507 GAS Stop ratio fuel gas (VSR-1) LVDT Settings : 0.7 0.01 VAC for 0 mm

0471 96TF-1 A040 FILT

Differential pressure transmitter of total filtration stages Settings : 04 0.05 mA for 0 mmH2O (0 inH2O) 20 0.1 mA for 254 mmH2O (10 inH2O)

0471 96TF-10 A040 FILT

Differential pressure transmitter between air inlet and hoods Settings : 04 0.05 mA for 0 mmH2O (0 inH2O) 20 0.1 mA for 254 mmH2O (10 inH2O)

0421 96TM-1 0605 ACCY

Torque converter IGV position transmitter Settings : 04 0.05 mA for 0 tr of handwheel (full scale 0-242 tr) 20 0.05 mA for 242 of handwheel (full scale 0-242 tr)

0469 96TV-1 0548 TURB LVDT (Linear variable displacement transmitter), compressor IGV actuator Settings : 0.7 0.01 VAC for 34 IGV angle

0469 96TV-2 0548 TURB LVDT (Linear variable displacement transmitter), compressor IGV actuator Settings : 0.7 0.01 VAC for 34 IGV angle

0415 96VC-11 235A TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0415 96VC-12 235A TURB Vibration sensor Characteristics : Output proximitor : 7.87 V/mm (0.2 V/mil) Settings : Gap : 1.4 0.05 mm (0.055 0.002 in)

0422 96VM-1 0639 OTHER

Gas mass flow transmitter Settings : 04 0.05 mA for 0 kg/s (0 lbm/s) 20 0.1 mA for 10 kg/s (22 lbm/s)

0462 96WF-1 A035 WI

Flow transmitter Settings : 04 0.2 mA for 0 m3/h (0 gpm) 20 0.2 mA for 20.4 0.1 m3/h (90 0.44 gpm)

0462 96WF-2 A035 WI


0462 96WF-3 A035 WI


0425 AAT-1A 637T TURB Atomizing air precooler air discharge thermocouple Characteristics : Type K

0425 AAT-2A 637T TURB Atomizing air precooler air discharge thermocouple Characteristics : Type K

0434 AH1-1 0908 N/A Control oil hydraulic accumulator Characteristics : 17.8 l (4.7 gal) | Nitrogen Settings : 51.7 1 bar (750 15 psi)

0422 AH1-3 0991 N/A Control oil hydraulic accumulator Characteristics : 17.8 l (4.70 gal) | Nitrogen Settings : 51.7 1 bar (750 15 psi)

0436 AT-AC-1 1113 ENCL-T Thermocouple accessory compartment Characteristics : Type K

0436 AT-AC-11 1195 ENCL-G Thermocouple gas compartment Characteristics : Type K

0436 AT-LC-1 637T TURB Air temperature load compartment Characteristics : Platinum PT100 | 100 Ohm at 0C (32F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)

0436 AT-TC-1 637T TURB Air temperature turbine compartment Characteristics : Platinum PT100 | 100 Ohm at 0C (32 F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)

0436 AT-TC-2 1113 ENCL-T Thermocouple : turbine compartment enclosure Characteristics : Type K

0436 AT-TC-3 1113 ENCL-T Thermocouple : turbine compartment enclosure Characteristics : Type K

0436 AT-WI-1 1659 ENCL-WI Water injection compartment temperature water injection compartment Characteristics : Type K

0415 BT-J1-1A,1B 235A TURB Dual thermocouple temperature journal bearing n1 Characteristics : Type K

0415 BT-J1-2A,2B 235A TURB Dual thermocouple temperature journal bearing n1 Characteristics : Type K

0415 BT-J2-1A,1B 235B TURB Dual thermocouple temperature journal bearing n2 Characteristics : Type K

0415 BT-J2-2A,2B 235B TURB Dual thermocouple temperature journal bearing n2 Characteristics : Type K

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0415 BT-J3-1A,1B 235C TURB Dual thermocouple temperature journal bearing n3 Characteristics : Type K

0415 BT-J3-2A,2B 235C TURB Dual thermocouple temperature journal bearing n3 Characteristics : Type K

0415 BT-TA1-4A,4B 235A TURB Dual thermocouple temperature pad n4 of thrust bearing n1 Characteristics : Type K

0415 BT-TA1-8A,8B 235A TURB Dual thermocouple temperature pad n8 of thrust bearing n1 Characteristics : Type K

0415 BT-TI1-1A,1B 235A TURB Dual thermocouple temperature pad n1 of counter thrust bearing n1 Characteristics : Type K

0415 BT-TI1-6A,6B 235A TURB Dual thermocouple temperature pad n6 of counter thrust bearing n1 Characteristics : Type K

0425 CA1 0607 N/A Main atomizing air compressor Characteristics : Centrifugal | 2.7 kg/s | Gear box shaft speed: 6600 rpm

0425 CA2 1047 N/A Booster atomizing air compressor Characteristics : Volumetric | 510 m3/h (2245.46 gal/min) | 4000 rpm

0415 CT-DA-1 637T TURB Thermocouple compressor air discharge temperature Characteristics : Type K

0415 CT-DA-2 637T TURB Thermocouple compressor air discharge temperature Characteristics : Type K

0415 CT-IF-1 637T TURB Thermocouple temperature compressor air inlet Characteristics : Type K

0415 CT-IF-2 637T TURB Thermocouple temperature compressor air inlet Characteristics : Type K

0492 CT-IF-3/R 637T TURB Resistance temperature detector Characteristics : Platinum PT100 | 100 Ohm at 0C (32 F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)

0421 ET-CRS-11/R 0603 ACCY Cranking motor stator Ph1 temperature sensor 1 Characteristics : Platinum PT100 | 100 Ohm at 0C (32 F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)

0421 ET-CRS-12/R 0603 ACCY Cranking motor stator Ph1temperature sensor 2 Characteristics : Platinum PT100 | 100 Ohm at 0C (32 F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)


0.385 Ohm/C (0.214 Ohm/F)


0.385 Ohm/C (0.214 Ohm/F)


0.385 Ohm/C (0.214 Ohm/F)


0.385 Ohm/C (0.214 Ohm/F)

0477 FA3-1 918T N/A Liquid fuel purge air filter Characteristics : 5 m

0425 FA4-1 0983 N/A Filter on actuation air of atomizing air and purge systems Characteristics : 5 m

0417 FA6 0909 N/A Filter on actuation air of bleed valve

0417 FA7 0931 N/A 5th stage extraction air moisture separator

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0462 FA8-2 A035 N/A Water injection air filter Characteristics : 5 m

0441 FAKJ-1 E026 N/A Pressure switch filter cleaning skid

0441 FAKJ-2 E026 N/A Screen type filter

0424 FD1-1 0613 N/A Flow divider Characteristics : type lineare, 7 elements with double pumps | 883 l/min (233 gpm) at

1650 rpm | 50 hz

0424 FF2-1 1014 N/A HP fuel filter Characteristics : Beta 40 = 75

0424 FF2-2 1014 N/A HP fuel filter Characteristics : Beta 40 = 75

0494 FF31-1 E021/E0

48 N/A

Filter before the pumps Characteristics : Mesh = 0.91 mm

0434 FH2-1 1051 N/A Hydraulic oil supply filter Characteristics : Beta 3 > 200

0434 FH2-2 1051 N/A Hydraulic oil supply filter Characteristics : Beta 3 > 200

0424 FH3 0992 N/A Hydraulic filter liquid fuel servo valve (control) Characteristics : 40 m

0469 FH6-1 0548 N/A Filter, hydraulic fluid supply , IGV controller assembly Characteristics : Beta 15 = 75

0422 FH7-1 0507 N/A Servo hydraulic supply filter of stop ratio valve (VSR) Characteristics : 15 m abs

0422 FH8-1 0509 N/A Gas fuel control valve (VGC) servo hydraulic fluid supply filter Characteristics : 15 m abs

0462 FM1-1 A035 N/A Water injection flowmeter Characteristics : 1,4 m3/h (6 gpm) | Nominal K factor : 343.5 pulse/l (1300 pulse/US

gallon) | 20.4 m3/h (90 gpm)

0462 FW1-1 A035 N/A High pressure filter Characteristics : Beta 13 = 75

0462 FW1-2 A035 N/A Water injection upstream pump Y strainer Characteristics : Filtering media 800m

0462 FW1-3 A035 N/A Conical filter downstream flowmeter Characteristics : Filtering media 150m

0421 HM-1 0605 N/A Torque converter and reversing gear

0469 HM3-1 0548 N/A Actuator assembly, inlet guide valve system Characteristics : Actuator operation limits : 31.5 0.5 to 87.75 0.25

0425 HX1-1 1003 N/A Atomizing air precooler

0416 LOF1-1 1010 N/A Lube oil filter Characteristics : Beta 40 = 75

0416 LOF1-2 1010 N/A Lube oil filter Characteristics : Beta 40 = 75

0416 LOHX-1 1001 N/A Lube oil cooler

0416 LOHX-2 1001 N/A Lube oil cooler

0416 LT-B1D-1 637T TURB Lube oil thermocouple #1 bearing drain Characteristics : Type K


SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring



0416 LT-BT1D-1 637T TURB Lube oil thermocouple #1 bearing thrusts drain Characteristics : Type K

0416 LT-G1D-1 ALT. GENE Lube oil thermocouple generator and load gear #1 bearing drain Characteristics : Type K

0416 LT-G2D-1 ALT. GENE Lube oil thermocouple generator and load gear #2 bearing drain Characteristics : Type K

0416 LT-OT-1 1218 TURB Resistance temperature in oil tank detector Characteristics : Platinum PT100 | 100 Ohm at 0C (32 F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)

0416 LT-OT-2 1218 TURB Resistance temperature in oil tank detector Characteristics : Platinum PT100 | 100 Ohm at 0C (32 F) | -50 to 260 C (-58 to 500 F) |

0.385 Ohm/C (0.214 Ohm/F)

0416 LT-TH-1 637A ACCY Lube oil temperature turbine header thermocouple Characteristics : Type K



0422 MG1 0512 N/A Gas fuel nozzle

0424 PF1 0611 ACCY Main fuel pump Characteristics : Positive displacement screw pump | 2924 rpm | 68.9 bar (1000 psi) |

870.5 l/min (230 gpm)

0494 PFA-30 E021/E0

48 N/A

Unloading pump Characteristics : Volumetric pump | 25 l/min (6.6 gpm)

0494 PFA-31 E021/E0

48 N/A

Dosing pump Characteristics : Volumetric pump | 1500 rpm | 10 bar (145 psi) | Flow to define

0494 PFA-32 E021/E0

48 N/A

Dosing pump Characteristics : Volumetric pump | 1500 rpm | 10 bar (145 psi) | Flow to define

0434 PH1 0627 N/A Main hydraulic supply pump Characteristics : Volumetric pump | 1422 rpm | 105 bar (1500 psi) | 65 l/min (17.1 gpm)

0434 PH2 0628 N/A Auxiliary hydraulic supply pump Characteristics : Volumetric pump | 1450 rpm | 105 bar (1500 psi) | 45.4 l/min (12 gpm)

0416 PQ1-1 0601 N/A Lube oil main pump Characteristics : Volumetric | 6.89 bar (100 psi) | 3000 l/min (792 gpm)

0416 PQ2-1 1007 N/A Lube oil emergency pump Characteristics : Centrifugal | 1.37 bar (19.87 psi) | 1596 l/min (422 gpm)

0494 PSV-31 E021/E0

48 N/A

Breather valve of 501BA tank Characteristics : Normal : NC Settings : Overpressure : 0.15 bar (2.17 psi); Vaccum : 0.01 bar (0.15 psi)

0462 PW1-1 A035 N/A Water injection pump unit Characteristics : Centrifugal pump | 12263 rpm | 33 bar (480 psi) | 26.6 m3/h (117 gpm)

0426 SLI-1 1104 ACCY Light warning auxiliaries compartment Characteristics : 0.015 | 50 hz | 230 UPS

0426 SLI-1A 1113 ENCL-T Fire alarm auxiliaries compartment Characteristics : Visual alarm | 24 VDC

0426 SLI-1B 1113 ENCL-T Fire alarm GT compartment Characteristics : Visual alarm | 24 VDC

0426 SLI-1C 1113 ENCL-T Fire alarm GT compartment Characteristics : Visual and audible alarm | 24 VDC

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0426 SLI-1D 1195 ENCL-G Fire alarm gas compartment Characteristics : Visual alarm | 24 VDC

0426 SLI-1E 1195 ENCL-G Fire alarm gas compartment Characteristics : Visual and audible alarm | 24 VDC

0426 SLI-2 1104 ACCY Light warning auxiliaries compartment Characteristics : 0.015 | 50 hz | 230 UPS

0426 SLI-2B 1113 ENCL-T Fire alarm GT compartment Characteristics : Visual alarm | 24 VDC

0426 SLI-2C 1113 ENCL-T Fire alarm GT compartment Characteristics : Visual and audible alarm | 24 VDC

0426 SLI-2E 1195 ENCL-G Fire alarm gas compartment Characteristics : Visual and audible alarm | 24 VDC

0426 SLI-3C 1113 ENCL-T Fire alarm load compartment Characteristics : Visual and audible alarm | 24 VDC

0415 TT-IB-1 637T TURB Thermocouple temperature exhaust tunnel Characteristics : Type K



0415 TT-WS1AO-1 637T TURB Thermocouple wheelspace temperature outer position after first wheel Characteristics : Type K

0415 TT-WS1AO-2 637T TURB Thermocouple wheelspace temperature outer position after first wheel Characteristics : Type K

0415 TT-WS1FI-1 637T TURB Thermocouple wheelspace temperature inner position forward first wheel Characteristics : Type K

0415 TT-WS1FI-2 637T TURB Thermocouple wheelspace temperature inner position forward first wheel Characteristics : Type K

0415 TT-WS2AO-1 637T TURB Thermocouple wheelspace temperature outer position after second wheel Characteristics : Type K

0415 TT-WS2AO-2 637T TURB Thermocouple wheelspace temperature outer position after second wheel Characteristics : Type K

0415 TT-WS2FO-1 637T TURB Thermocouple wheelspace temperature outer position forward second wheel Characteristics : Type K

0415 TT-WS2FO-2 637T TURB Thermocouple wheelspace temperature outer position forward second wheel Characteristics : Type K

0415 TT-WS3AO-1 637T TURB Thermocouple wheelspace temperature outer position after third wheel Characteristics : Type K

0415 TT-WS3AO-2 637T TURB Thermocouple wheelspace temperature outer position after third wheel Characteristics : Type K

0415 TT-WS3FO-1 637T TURB Thermocouple wheelspace temperature outer position forward third wheel Characteristics : Type K

0415 TT-WS3FO-2 637T TURB Thermocouple wheelspace temperature outer position forward third wheel Characteristics : Type K

0415 TT-XD-1 0623 TURB Thermocouple temperature of GT exhaust Characteristics : Type K



SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring























0477 VA13-1 0991 N/A

Gas fuel purge circuit valve Characteristics : Normal : NC Settings : Opening time shall be 30 5 seconds. Closing time shall be 10 seconds at maximum.

0477 VA13-2 0991 N/A Gas fuel purge circuit valve Characteristics : Normal : NC Settings : Opening time of VA13-2 should be less than VA13-1

0442 VA17-1 1026 N/A False start drain valve Characteristics : Normal : FO

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring




0425 VA18-1 1070 N/A Atomizing air compressor pressure adjustment valve Characteristics : Normal : NC

0477 VA19-1 918T N/A Liquid fuel purge air valve Characteristics : Normal : C to L opened ; U closed

0417 VA2-1 1022 N/A Compressor bleed valve Characteristics : Normal : NO


0425 VA22-1 0922 N/A CA2 booster atomizing air compressor inlet air isolation butterfly valve Characteristics : Normal : NO



0477 VA36-1 0991 N/A

Quick exhaust pneumatic valve for gas fuel purge valve VA13-1 Characteristics : Under pressure : 1 to 2 open and vent 3 closed Out of pressure : 2 open to vent 3

0477 VA36-2 0991 N/A

Quick exhaust pneumatic valve for gas fuel purge valve VA13-2 Characteristics : Under pressure : 1 to 2 open and vent 3 closed Out of pressure : 2 open to vent 3

0494 VA99-31 E021/E0

48 N/A

Pneumatic valve Characteristics : Normal : NO

0494 VA99-32 E021/E0

48 N/A

Pneumatic valve Characteristics : Normal : NC

0494 VA99-33 E021/E0

48 N/A

Pneumatic valve Characteristics : Normal : NO

0434 VAB1 0947 N/A Hydraulic system air bleed valve (main)

0434 VAB2 0947 N/A Hydraulic system air bleed valve (auxiliary)

0424 VC3 0516 N/A By pass control valve Characteristics : Stroke = 28.57 mm (1.125 in) | Normal : NO

0462 VC4-1 A035 N/A Water injection flow control valve Characteristics : Normal : NC

0462 VCK100 A035 N/A Check valve Characteristics : Normal : NC



0424 VCK1-1T14 0961 N/A Liquid fuel nozzle check valve Characteristics : Normal : NC Settings : Cracking pressure : 8.27 0.34 bar (120 5 psi)

0416 VCK20-13 A098 N/A

Lube oil mist eliminator check valve Characteristics : Normal : NC Settings : beginning to open at -100 10 mm H2O (-3.94 0.4 in H20) at full speed no

load

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0477 VCK2-1T14 918T N/A Liquid fuel primary nozzle purge air check valve Characteristics : Normal : NC Settings : Cracking pressure : Minimum 0.07 bar (1 psi)

0434 VCK3-1 0947 N/A Hydraulic pump check valve for main pump Characteristics : Normal : NC Settings : Treshold = 1.5 0.1 bar (21.75 1.45 psi)

0434 VCK3-2 0947 N/A Hydraulic pump check valve for auxiliary pump Characteristics : Normal : NC Settings : Treshold = 1.5 0.1 bar (21.75 1.45 psi)

0417 VCK7-1 A053 N/A Turbine exhaust frame cooling check valve Characteristics : Normal : NC Settings : opening pressure : Non-adjutable : 7 mbar (0.1 psi)

0417 VCK7-2 A053 N/A Turbine exhaust frame cooling check valve Characteristics : Normal : NC Settings : opening pressure : Non-adjutable : 7 mbar (0.1 psi)

0422 VGC-1 0509 GAS Gas control valve primary Characteristics : Stroke maxi = 38.1 mm (1.5 in) | Normal : NC

0424 VH17-1 0992 N/A Liquid fuel nozzle pressure selector valve

0469 VH3-1A 0548 N/A Trip relay, hydraulic IGV

0469 VH3-1B 0548 N/A Trip relay, hydraulic IGV

0422 VH5-1 0507 GAS Gas fuel dump valve VSR-1 valve Characteristics : Normal : NC

0422 VH5-2 0509 GAS Gas fuel dump valve VGC-1 valve Characteristics : Normal : NC

0422 VM-1 0639 N/A Coriolis mass flow meter

0434 VM4 1051 N/A Hydraulic filter transfer valve

0424 VP-1 0961 N/A Fuel liquid purge multiport valve Characteristics : Normal : NC

0416 VPR2-1 1023 N/A Bearing header pressure regulator valve Characteristics : Normal : NC Settings : 1.72 +0.13/-0 bar (25 +2/-0 psi)

0494 VPR30-31 E021/E0

48 N/A

Filter regulator Characteristics : Normal : NO Settings : 4 0.35 bar (58 5 psi)

0434 VPR3-1 0627 N/A Hydraulic supply pump (PH1) compensator Settings : 103.4 1.37 bar (1500 20 psi)

0477 VPR44-1 0991 N/A Filter pressure regulator on actuation air of gas fuel purge air valve Settings : 2.3 +0/-0.2 bar (33 +0/-3 psi)

0477 VPR44-2 0991 N/A Filter pressure regulator on actuation air of gas fuel purge air valve Settings : 2.3 +0/-0.2 bar (33 +0/-3 psi)

0477 VPR54-1 918T N/A Filter pressure regulator on valve actuation air Settings : 3.27 +1.7/-0 bar (47.5 +2.7/-0 psi)

0462 VPR62-1 A035 N/A Water injection control valve pressure regulation (part of VC4-1) Settings : 2,6 0.1 bar (37.7 1.5 psi)

0462 VPR62-11 A035 N/A Water Injection stop valve pressure regulation (part of VS2-1) Settings : 6.2 0.1 bar (90 1.5 psi)

0462 VPR62-13 A035 N/A Water Injection stop valve pressure regulation (part of VS2-2) Settings : 6.2 0.1 bar (90 1.5 psi)

0425 VPR68-1 0922 N/A Pressure regulator valve for intrumentation air of VA22-1 Settings : 3.79 0.13 bar (55 2 psi)

SIZE DWG NO SH REV


SIZE

A4

CAGE CODE DWG NO

392A8431

SECTION 01EN




MLI PID

Devices MLI Wiring


0462 VQE1-1 A035 N/A Quick exhaust valve (part of VS2-1) Characteristics : Normal : NC

0462 VQE1-2 A035 N/A Quick exhaust valve (part of VS2-2) Characteristics : Normal : NC

0416 VR1 1016 N/A Main lube oil pump pressure relief valve Characteristics : Normal : NC Settings : Opening at 6.89 + 0.13/-0 bar (100 + 2/-0 psi)

0434 VR21 0947 N/A Main hydraulic supply pump pressure relief valve Characteristics : Normal : NC Settings : 113.7 1.37 bar (1650 20 psi)

0434 VR22 0947 N/A Auxiliary hydraulic supply pump pressure relief valve Characteristics : Normal : NC Settings : 113.7 1.37 bar (1650 20 psi)

0441 VR26 E026 N/A LP hopper vibrator pressure relief valve Characteristics : Normal : NC Settings : Opening at 5 0.1 bar (72.5 1.5 psi)

0424 VR27 0992 N/A Fuel oil supply pressure relief valve Characteristics : Normal

Date post:	30-Oct-2015
Category:	Documents
Upload:	sulaiman-jaffery
View:	471 times
Download:	70 times

G.E Device Summary for Frame 9E

Documents