GE Fanuc Pricelist

TECHNOLOGY AND MOREGFPE-060-REF-EN

Automation Equipment & Factory IT Price List

GE Fanuc Automation Europe

JANUARY 2003

The following are trademarks for products of GE Fanuc Automation

Alarm MasterCIMPLICITY®CIMPLICITY® 90-ADSCIMPLICITY® PowerTRACCIMSTARCONTROL 90Field Control™GEnetGenius®Genius® Power TRACHelpmateLogicmasterModelmasterMotion MatePowerMotionPROCESS 90ProLoopPROMACROSeries OneSeries ThreeSeries FiveSeries SixSeries 90™VuMasterVersaMax®VersaPoint®VersaProWorkmasterSS-90

GE Fanuc Automation Europe S.A. makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of the information contained herein. No warranties of merchantability of fitness for purpose shall apply. GE Fanuc Automation Europe S.A. Delivery and Payment Terms apply.

KEY TO STATUS CODES USED IN THIS GUIDE:

- New Item*

© 2003 GE Fanuc Automation Europe

# - Ask for Availability - Mature Product - Orderable Minimum of 2 Years from Effective Date Listed Next to Code as: MMYYM - Discontinued Product - from Effective Date Listed Next to Code as: MMYYD

Products listed in the Automation Equipment and Factory IT Price List (GFPE-060-xxx-x) comply with CE regulations. CE approval pending for certain models, contact GE Fanuc for details or refer to Declaration of Conformity.

This Price List supercedes all preceeding price lists.

Automation Equipment & Factory IT Price ListGFPE-060-REF-EN

Page

TABLE OF CONTENTS

VERSAMAX® NANO & VERSAMAX® MICRO CONTROLLERVERSAMAX NANO..................................................................................................................................................... 1VERSAMAX NANO 10-POINT CONTROLLERS....................................................................................................... 1VERSAMAX MICRO................................................................................................................................................... 1VERSAMAX MICRO 14-POINT CONTROLLERS...................................................................................................... 1VERSAMAX MICRO 28-POINT CONTROLLERS...................................................................................................... 2VERSAMAX MICRO 23-POINT ANALOG CONTROLLERS...................................................................................... 2VERSAMAX MICRO EXPANSIONS........................................................................................................................... 2VERSAMAX MICRO 14-POINT EXPANSIONS......................................................................................................... 2VERSAMAX MICRO 28-POINT EXPANSIONS......................................................................................................... 3VERSAMAX MICRO ANALOG EXPANSIONS........................................................................................................... 3VERSAMAX MICRO EXPANSION CABLES.............................................................................................................. 3VERSAMAX NANO & MICRO COMMUNICATION................................................................................................... 3VERSAMAX NANO & MICRO ACCESSORIES........................................................................................................ 4VERSAMAX NANO & MICRO STARTER KITS......................................................................................................... 4PROGRAMMING SOFTWARE FOR VERSAMAX NANO & MICRO......................................................................... 5PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGES............................................................................... 5PROGRAMMING SOFTWARE UPGRADES............................................................................................................. 5PROGRAMMING SOFTWARE UPGRADE SERVICE & PRODUCT SUPPORT (SAFE)......................................... 5LEGACY PROGRAMMING SOFTWARE................................................................................................................... 5VERSAMAX NANO & MICRO DOCUMENTATION.................................................................................................. 6

VERSAMAX® CONTROLLER & I/O PRODUCTSVERSAMAX CENTRAL PROCESSOR UNITS (CPU)............................................................................................... 7VERSAMAX NETWORK INTERFACE UNITS........................................................................................................... 7VERSAMAX COMMUNICATION MODULES............................................................................................................. 7VERSAMAX EXPANSION.......................................................................................................................................... 7VERSAMAX POWER SUPPLIES............................................................................................................................... 8VERSAMAX CARRIERS............................................................................................................................................ 9VERSAMAX DISCRETE INPUT MODULES.............................................................................................................. 9VERSAMAX DISCRETE OUTPUT MODULES.......................................................................................................... 10VERSAMAX MIXED DISCRETE MODULES.............................................................................................................. 10VERSAMAX RELAY OUTPUT MODULES................................................................................................................. 10VERSAMAX ANALOG INPUT MODULES................................................................................................................. 10VERSAMAX ANALOG OUTPUT MODULES............................................................................................................. 11VERSAMAX MIXED ANALOG MODULES................................................................................................................. 11VERSAMAX CABLES................................................................................................................................................. 11VERSAMAX ACCESSORIES..................................................................................................................................... 12PROGRAMMING SOFTWARE FOR VERSAMAX PLC'S.......................................................................................... 12PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGES.............................................................................. 12PROGRAMMING SOFTWARE REMOTE I/O MANAGER......................................................................................... 13PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGES.......................................................................... 13PROGRAMMING SOFTWARE DEMO PACKAGES.................................................................................................. 13PROGRAMMING SOFTWARE UPGRADES............................................................................................................. 13PROGRAMMING SOFTWARE UPGRADE SERVICE & TECHNICAL SUPPORT (SAFE)....................................... 13LEGACY PROGRAMMING SOFTWARE................................................................................................................... 14VERSAMAX DOCUMENTATION............................................................................................................................... 14

SERIES 90™-30 CONTROLLER & I/O PRODUCTSSERIES 90-30 CENTRAL PROCESSOR UNITS (CPU)............................................................................................ 15

JANUARY 2003GE Fanuc Automation Europe


Page

TABLE OF CONTENTS

SERIES 90-30 BASES (USE WITH CPU331 and higher).......................................................................................... 15SERIES 90-30 POWER SUPPLIES........................................................................................................................... 16SERIES 90-30 DISCRETE INPUT MODULES........................................................................................................... 16SERIES 90-30 DISCRETE OUTPUT MODULES....................................................................................................... 17SERIES 90-30 MIXED I/O MODULES........................................................................................................................ 17SERIES 90-30 ANALOG INPUT MODULES.............................................................................................................. 18SERIES 90-30 ANALOG OUTPUT MODULES.......................................................................................................... 18SERIES 90-30 SPECIAL FUNCTION MODULES...................................................................................................... 19SERIES 90-30 COPROCESSOR MODULES............................................................................................................ 19SERIES 90-30 MOTION MODULES.......................................................................................................................... 20SERIES 90-30 SERIAL COMMUNICATION MODULES............................................................................................ 20SERIES 90-30 GENIUS COMMUNICATION MODULES........................................................................................... 21SERIES 90-30 PROFIBUS COMMUNICATION MODULES...................................................................................... 21SERIES 90-30 ETHERNET COMMUNICATION MODULES..................................................................................... 21SERIES 90-30 I/O INTERFACE AND OTHER FIELDBUS MODULES...................................................................... 21SERIES 90-30 CABLES............................................................................................................................................. 22SERIES 90-30 ACCESSORIES.................................................................................................................................. 23SERIES 90-30 UPGRADE KITS................................................................................................................................. 24SERIES 90-30 PRODUCTS WITH LOW TEMPERATURE TESTING....................................................................... 25PROGRAMMING SOFTWARE FOR SERIES 90-30.................................................................................................. 26PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGES.............................................................................. 27PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGES........................................................................... 27PROGRAMMING SOFTWARE DEMO PACKAGES.................................................................................................. 27PROGRAMMING SOFTWARE UPGRADES............................................................................................................. 27PROGRAMMING SOFTWARE UPGRADE SERVICE & TECHNICAL SUPPORT (SAFE)....................................... 27PROGRAMMING SOFTWARE STATE LOGIC.......................................................................................................... 28 PROGRAMMING SOFTWARE LEGACY PRODUCTS............................................................................................. 28SERIES 90-30 C TOOLKITS...................................................................................................................................... 28SERIES 90-30 HOST COMMUNICATION TOOLKITS.............................................................................................. 29SERIES 90-30 OTHER SOFTWARE.......................................................................................................................... 29CRITICAL CONTROL................................................................................................................................................. 30SERIES 90-30 DOCUMENTATION............................................................................................................................ 30

SERIES 90™-70 CONTROLLER & I/O PRODUCTSSERIES 90-70 CENTRAL PROCESSOR UNITS (CPU)............................................................................................ 31SERIES 90-70 MEMORY DAUGHTERBOARDS (CPU & PCM)................................................................................ 31SERIES 90-70 STATE LOGIC PRODUCTS.............................................................................................................. 31SERIES 90-70 RACKS............................................................................................................................................... 31SERIES 90-70 POWER SUPPLIES........................................................................................................................... 32SERIES 90-70 I/O INTERFACE MODULES............................................................................................................... 32SERIES 90-70 CABLES............................................................................................................................................. 32SERIES 90-70 DISCRETE INPUT MODULES........................................................................................................... 33SERIES 90-70 DISCRETE OUTPUT MODULES....................................................................................................... 33SERIES 90-70 ANALOG INPUT MODULES.............................................................................................................. 33SERIES 90-70 ANALOG OUTPUT MODULES.......................................................................................................... 33SERIES 90-70 SPECIAL FUNCTION MODULES...................................................................................................... 33SERIES 90-70 COMMUNICATION MODULES.......................................................................................................... 34SERIES 90-70 ACCESSORIES.................................................................................................................................. 34CRITICAL CONTROL................................................................................................................................................. 35SERIES 90-70 UPGRADE KITS................................................................................................................................. 37



Page

TABLE OF CONTENTS

PROGRAMMING SOFTWARE FOR SERIES 90-70.................................................................................................. 37PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGES.............................................................................. 37PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGES......................................................................... 38PROGRAMMING SOFTWARE DEMO PACKAGES.................................................................................................. 38PROGRAMMING SOFTWARE UPGRADES............................................................................................................. 38PROGRAMMING SOFTWARE UPGRADE SERVICE & PRODUCT SUPPORT (SAFE)......................................... 38PROGRAMMING SOFTWARE LEGACY PRODUCTS.............................................................................................. 38SERIES 90-70 GMR PROGRAMMING SOFTWARE................................................................................................. 38SERIES 90-70 C TOOLKITS...................................................................................................................................... 39SERIES 90-70 HOST COMMUNICATION TOOLKITS.............................................................................................. 40SERIES 90-70 OTHER SOFTWARE.......................................................................................................................... 40SERIES 90-70 DOCUMENTATION............................................................................................................................ 41

OPERATOR CONTROL STATION (OCS)MINI OCS................................................................................................................................................................... 42MINI OCS WITH INTEGRATED NETWORK INTERFACE........................................................................................ 42OCS MAIN UNITS...................................................................................................................................................... 42SMART STACK DIGITAL COMBO MODULES.......................................................................................................... 43SMART STACK DIGITAL I/O MODULES................................................................................................................... 43SMART STACK ANALOG INPUT MODULES............................................................................................................ 43SMART STACK ANALOG OUTPUT MODULES........................................................................................................ 43SMART STACK MIXED ANALOG MODULES........................................................................................................... 44SMART STACK MIXED DISCRETE AND ANALOG MODULES............................................................................... 44SMART STACK SPECIALITY MODULES.................................................................................................................. 44OCS INTERFACE MODULES.................................................................................................................................... 44OCS DEVELOPMENT SOFTWARE........................................................................................................................... 44OCS DOCUMENTATION........................................................................................................................................... 45

VERSAPOINT™ I/O SYSTEMVERSAPOINT NETWORK INTERFACE UNITS........................................................................................................ 46VERSAPOINT POWER TERMINALS......................................................................................................................... 46VERSAPOINT SEGMENT TERMINALS.................................................................................................................... 46VERSAPOINT DISCRETE INPUT MODULES........................................................................................................... 46VERSAPOINT DISCRETE OUTPUT MODULES....................................................................................................... 47VERSAPOINT ANALOG INPUT MODULES.............................................................................................................. 47VERSAPOINT ANALOG OUTPUT MODULES.......................................................................................................... 47VERSAPOINT SPECIAL FUNCTION MODULES...................................................................................................... 48VERSAPOINT MOTOR STARTER MODULES.......................................................................................................... 48VERSAPOINT I/O TERMINAL STRIPS...................................................................................................................... 48VERSAPOINT POWER TERMINAL STRIPS............................................................................................................. 48VERSAPOINT TERMINAL STRIP SETS................................................................................................................... 48VERSAPOINT ACCERSSORIES............................................................................................................................... 49VERSAPOINT DEMO SYSTEMS............................................................................................................................... 49

FIELD CONTROL™ I/O SYSTEMFIELD CONTROL BUS INTERFACE UNITS (BIU).................................................................................................... 50FIELD CONTROL BASES.......................................................................................................................................... 50FIELD CONTROL FIELD PROCESSOR.................................................................................................................... 50FIELD CONTROL CABLES........................................................................................................................................ 50FIELD CONTROL DISCRETE INPUT MODULES..................................................................................................... 50FIELD CONTROL DISCRETE OUTPUT MODULES................................................................................................. 51



Page

TABLE OF CONTENTS

FIELD CONTROL ANALOG INPUT MODULES......................................................................................................... 51FIELD CONTROL ANALOG OUTPUT MODULES.................................................................................................... 51ACCESSORIES.......................................................................................................................................................... 51

GENIUS® I/O SYSTEMGENIUS INTERFACE MODULES.............................................................................................................................. 52GENIUS DISCRETE I/O BLOCKS.............................................................................................................................. 52GENIUS ANALOG I/O BLOCKS................................................................................................................................. 52GENIUS RTD & THERMOCOUPLE INPUT BLOCKS............................................................................................... 52GENIUS SPECIAL FUNCTION BLOCKS................................................................................................................... 52GENIUS CABLES & BUS TERMINATORS................................................................................................................ 52GENIUS HAND HELD MONITOR & ACCESSORIES................................................................................................ 53GENIUS UPGRADE KITS.......................................................................................................................................... 53

BUSSTOP I/O SYSTEMBUSSTOP I/O BLOCKS............................................................................................................................................. 54BUSSTOP CABLES & ACCESSORIES..................................................................................................................... 54

OPERATOR INTERFACES QUICKPANELQUICKPANEL 2000 SERIES UNITS.......................................................................................................................... 55QUICKPANEL UNITS................................................................................................................................................. 56QUICKPANEL SOFTWARE....................................................................................................................................... 57QUICKPANEL PROGRAMMING SOFTWARE.......................................................................................................... 57QUICKPANEL PROGRAMMING SOFTWARE - MAINTENANCE............................................................................. 57HANDY QUICKPANEL 2000 CONNECTIVITY and ACCESSORIES........................................................................ 58QUICKPANEL NETWORK INTERFACES.................................................................................................................. 58COMMUNICATION CABLES FOR GE FANUC SERIES 90 PLC.............................................................................. 59COMMUNICATION CABLES FOR ALLEN-BRADLEY............................................................................................... 59COMMUNICATION CABLES FOR AROMAT............................................................................................................. 59COMMUNICATION CABLES FOR B&R..................................................................................................................... 59COMMUNICATION CABLES FOR HITACHI.............................................................................................................. 59COMMUNICATION CABLES FOR IDEC................................................................................................................... 59COMMUNICATION CABLES FOR KEYENCE........................................................................................................... 60COMMUNICATION CABLES FOR MITSUBISHI....................................................................................................... 60COMMUNICATION CABLES FOR MODICON........................................................................................................... 60COMMUNICATION CABLES FOR OMRON.............................................................................................................. 60COMMUNICATION CABLES FOR PLC DIRECT....................................................................................................... 60COMMUNICATION CABLES FOR RELIANCE.......................................................................................................... 60COMMUNICATION CABLES FOR SATTCON........................................................................................................... 60COMMUNICATION CABLES FOR SIEMENS............................................................................................................ 61COMMUNICATION CABLES FOR SIMATIC TI......................................................................................................... 61COMMUNICATION CABLES FOR SQUARE D......................................................................................................... 61COMMUNICATION CABLES FOR TELEMECANIQUE............................................................................................. 61COMMUNICATION CABLES FOR TOSHIBA............................................................................................................ 61COMMUNICATION CABLES FOR TOYOPUC.......................................................................................................... 61PRINTER CABLES..................................................................................................................................................... 61QUICKPANEL COVERS AND OTHER OVERLAYS.................................................................................................. 62QUICKPANEL MAINTENANCE.................................................................................................................................. 63QUICKPANEL ACCESSORIES.................................................................................................................................. 63QUICKPANEL NUMERIC AND FUNCTION KEYPAD............................................................................................... 63

OPERATOR INTERFACES DATAPANEL



Page

TABLE OF CONTENTS

VERSAMAX DATAPANEL.......................................................................................................................................... 64DATAPANEL 100 SERIES......................................................................................................................................... 64DATAPANEL 200 SERIES......................................................................................................................................... 64DATAPANEL CABLES............................................................................................................................................... 65DATAPANEL CONFIGURATION SOFTWARE.......................................................................................................... 65CONNECTIVITY......................................................................................................................................................... 66VT 100 DATAPANEL.................................................................................................................................................. 66DATAPANEL ACCESSORIES.................................................................................................................................... 66DATAPANEL FUNCTIONAL UPGRADES................................................................................................................. 66DATAPANEL DOCUMENTATION.............................................................................................................................. 67

OPERATOR INTERFACES CIMPLICITY® VIEWSTATION/CONTROLSTATION CECONTROLSTATION CE............................................................................................................................................. 68VIEWSTATION CE..................................................................................................................................................... 68ACCESSORIES AND CABLES.................................................................................................................................. 68

OPERATOR INTERFACES CIMPLICITY® STATIONCIMPLICITY Station.................................................................................................................................................... 69Unbundled Station...................................................................................................................................................... 69Station Machine Edition View & Logic PC Development............................................................................................ 69Station Machine Edition View & Logic PC Runtime.................................................................................................... 69Station Plant Edition Server Unlimited........................................................................................................................ 69

OPERATOR INTERFACES HORNEROPERATOR STATIONS............................................................................................................................................. 70OPERATOR STATIONS CABLES............................................................................................................................. 71OPERATOR INTERFACE.......................................................................................................................................... 72

MOTION CONTROLLERSMOTION MATE DSM300 MOTION CONTROLLER.................................................................................................. 73MOTION MATE APM300 MOTION CONTROLLERS................................................................................................ 74STEPPER MOTION CONTROLLERS........................................................................................................................ 74HIGH SPEED COUNTER AND I/O PROCESSOR..................................................................................................... 74OCS MOTION (STEPPER)......................................................................................................................................... 74MANUALS.................................................................................................................................................................. 75

BETA SERIES SERVO SYSTEMBETA SERVO MOTORS PACKAGES....................................................................................................................... 76ALPHA C SERVO MOTORS PACKAGES................................................................................................................. 76ALPHA SERVO MOTORS PACKAGES..................................................................................................................... 77ALPHA M SERVO MOTORS PACKAGES................................................................................................................. 78ALPHA L SERVO MOTORS PACKAGES.................................................................................................................. 78CONNECTOR KITS FOR SERVO MOTORS (STRAIGHT)....................................................................................... 78CONNECTOR KITS FOR SERVO MOTORS (ELBOW)............................................................................................ 78CABLE KITS FOR POWER / ENCODER (BETA SVU 12/20) STRAIGHT................................................................ 79CABLE KITS FÜR POWER / ENCODER (BETA SVU 12/20) ELBOW...................................................................... 80CABLE KITS FOR POWER / ENCODER (BETA SVU 40/80) STRAIGHT................................................................ 80CABLE KITS FOR POWER / ENCODER (BETA SVU 40/80) ELBOW...................................................................... 81CABLES FOR BRAKE................................................................................................................................................ 81REGENERATIVE RESISTOR FOR BETA SVU 12/20............................................................................................... 81REGENERATIVE RESISTOR FOR BETA SVU 40/80............................................................................................... 82BATTERIES FOR ABSOLUTE ENCODERS.............................................................................................................. 82



Page

TABLE OF CONTENTS

ACCESSORIES.......................................................................................................................................................... 82TRANSFORMERS AND LINE FILTERS.................................................................................................................... 82MANUALS.................................................................................................................................................................. 83

ALPHA SERIES SERVO SYSTEMS (COMPACT / SVU)ALPHA SERVO MOTORS PACKAGES..................................................................................................................... 84ALPHA C SERVO MOTORS PACKAGES................................................................................................................. 84ALPHA L SERVO MOTORS PACKAGES.................................................................................................................. 85ALPHA M SERVO MOTORS PACKAGES................................................................................................................. 85BETA SERVO MOTORS PACKAGES....................................................................................................................... 85CONNECTOR KITS FOR SERVO MOTORS STRAIGHT......................................................................................... 86CONNECTOR KITS SERVO MOTORS ELBOW....................................................................................................... 86CABLE KITS FOR SERVO MOTORS (STRAIGHT).................................................................................................. 87CABLE KITS FOR SERVO MOTORS (ELBOW)........................................................................................................ 88CABLE KITS FOR BRAKES....................................................................................................................................... 89ACCESSORIES.......................................................................................................................................................... 89TRANSFORMERS AND LINE FILTERS.................................................................................................................... 90MANUALS.................................................................................................................................................................. 90

STAND ALONE MOTIONSTAND ALONE MOTION........................................................................................................................................... 91S2K CONTROLLER.................................................................................................................................................... 91SA MOTORS WITHOUT BRAKE............................................................................................................................... 92SA MOTORS WITH BRAKE....................................................................................................................................... 92ACCESSORIES.......................................................................................................................................................... 92CABLE KITS............................................................................................................................................................... 92PROGRAMMING SOFTWARE................................................................................................................................... 93SAFE for CIMPLICITY Motion Developer................................................................................................................... 93

CIMPLICITY® MACHINE EDITIONCIMPLICITY MACHINE EDITION............................................................................................................................... 94LOGIC PC & VIEW DEVELOPMENT/RUNTIME........................................................................................................ 94LOGIC PC & VIEW DEVELOPMENT/RUNTIME HARD REAL TIME........................................................................ 94LOGIC PC & VIEW RUNTIME.................................................................................................................................... 95LOGIC PC & VIEW RUNTIME HARD REAL TIME..................................................................................................... 95I/O COMMUNICATION BOARD................................................................................................................................. 95LOGIC DEVELOPER -PLC......................................................................................................................................... 96LOGIC DEVELOPER -PLC UPGRADES................................................................................................................... 97LOGIC DEVELOPER -STATE.................................................................................................................................... 97MOTION DEVELOPER............................................................................................................................................... 97DEVELOPMENT SUITES........................................................................................................................................... 98SAFE.......................................................................................................................................................................... 98SAFE FOR LOGIC PC & VIEW DEVELOPMENT/RUNTIME..................................................................................... 98SAFE FOR LOGIC PC & VIEW DEVELOPMENT/RUNTIME HARD REAL TIME..................................................... 99SAFE FOR LOGIC PC & VIEW RUNTIME................................................................................................................. 99SAFE FOR LOGIC PC & VIEW RUNTIME HARD REAL TIME.................................................................................. 99SAFE FOR LOGIC DEVELOPER -PLC...................................................................................................................... 100SAFE FOR LOGIC DEVELOPER -STATE................................................................................................................. 100SAFE FOR MOTION DEVELOPER............................................................................................................................ 100DEMONSTRATION CD PACKS................................................................................................................................. 100

CIMPLICITY® PLANT EDITION



Page

TABLE OF CONTENTS

BASE SYSTEM SERVERS DEVELOPMENT & RUNTIME....................................................................................... 101BASE SYSTEM SERVERS RUNTIME ONLY............................................................................................................ 101VIEWER NODES........................................................................................................................................................ 102PRO SERVERS DEVELOPMENT & RUNTIME......................................................................................................... 102PRO SERVERS RUNTIME ONLY.............................................................................................................................. 102ADDITIONAL COMMUNICATION PROTOCOLS...................................................................................................... 103CIMPLICITY® OPC Servers....................................................................................................................................... 104PRODUCT OPTIONS................................................................................................................................................. 105CIMPLICITY® SQL..................................................................................................................................................... 106CIMPLICITY® TRACKER........................................................................................................................................... 106UPGRADES - FUNCTIONAL...................................................................................................................................... 107UPGRADES - SOFTWARE VERSION....................................................................................................................... 107SAFE AND RENEWALS............................................................................................................................................. 107DEMONSTRATION CD PACKS................................................................................................................................. 108

CIMPLICITY® APPLICOM COMMUNICATIONAPPLICOM BOARD COMMUNICATIONS................................................................................................................. 109COMMUNICATIONS BOARD ACCESSORIES.......................................................................................................... 110

VERSAPRO PROGRAMMING SOFTWAREVERSAPRO NANO/MICRO EDITION........................................................................................................................ 111VERSAPRO STANDARD EDITION............................................................................................................................ 111VERSAPRO PROFESSIONAL EDITION................................................................................................................... 112PRODUCT OPTIONS................................................................................................................................................. 112DEMO PACKAGES.................................................................................................................................................... 112UPGRADE SERVICE................................................................................................................................................. 113DOCUMENTATION.................................................................................................................................................... 113

CONTROL PROGRAMMING SOFTWAREONLINE PROGRAMMING PACKAGES..................................................................................................................... 114OFFLINE PROGRAMMING PACKAGES................................................................................................................... 114DEMO AND EVALUATION PACKAGES.................................................................................................................... 114OPTION AND TARGET UPGRADES......................................................................................................................... 114 ACCESSORIES......................................................................................................................................................... 114DOCUMENTATION.................................................................................................................................................... 115

LOGICMASTER PROGRAMMING SOFTWARESERIES 90 MICRO LOGICMASTER SOFTWARE................................................................................................... 116SERIES 90-30 LOGICMASTER SOFTWARE............................................................................................................ 116SERIES 90-30 LOGICMASTER UPGRADE SERVICE.............................................................................................. 116SERIES 90-30 HOT BACKUP PROGRAMMING SOFTWARE.................................................................................. 116SERIES 90-70 LOGICMASTER SOFTWARE............................................................................................................ 117SERIES 90-70 GMR PROGRAMMING SOFTWARE................................................................................................. 117SERIES 90-70 LOGICMASTER UPGRADE SERVICE.............................................................................................. 117

OTHER CONTROLLER SOFTWAREC TOOLKITS.............................................................................................................................................................. 118HOST COMMUNICATION TOOLKITS....................................................................................................................... 118OTHER SOFTWARE.................................................................................................................................................. 118

TECHNICAL DOCUMENTATIONTECHNICAL DOCUMENTATION............................................................................................................................... 119



Page

TABLE OF CONTENTS

SERVICES FOR AUTOMATION EQUIPMENT & FACTORY ITCUSTOMER SUPPORT RATES................................................................................................................................ 120


Item Status

VERSAMAX® NANO & VERSAMAX® MICRO CONTROLLER

Catalog Number Description Weight

(kg)


VERSAMAX NANOThe VersaMax Nano Controller has a RS-232 port (RJ45) that can be used for SNP/SNPX Slave, Modbus RTU Slave and Serial In/Out communication. With Serial I/O commands devices such as pagers, intelligent scales, bar code readers and printers as well as modems can easily be connected to the serial port. The VersaMax Nano is not expandable.

Note: The following manuals are recommended for the VersaMax Nano Controllers: GFK-1645 VersaMax Nano and VersaMax Micro PLC User's Manual

VERSAMAX NANO 10-POINT CONTROLLERSIC200NDR010 VersaMax Nano Controller 12 VDC Power Supply, 6 Inputs (12 VDC), 4 Relay

Outputs (2.0 A)TBD

IC200NDR001 VersaMax Nano Controller 24 VDC Power Supply, 6 Inputs (24 VDC), 4 Relay Outputs (2.0 A)

0.200

IC200NDD101 VersaMax Nano Controller 24 VDC Power Supply, 6 Inputs (24 VDC), 4 Transistor Out (24 VDC)

0.200

IC200NAL110 VersaMax Nano Controller 12 VDC Power Supply, 6 Inputs (12 VDC), 1 Analog Input (8Bit), 4 Relay Outputs (2.0 A)

0.412

Note: Requires VersaPro 2.03 minimum or CIMPLICITY Logic Developer PLC 3.0 minimum.

#

IC200NAL211 VersaMax Nano Controller 24 VDC Power Supply, 6 Inputs (24 VDC), 1 Analog Input (8Bit), 4 Relay Outputs (2.0 A)

0.412

Note: Requires VersaPro 2.03 minimum or CIMPLICITY Logic Developer PLC 3.0 minimum.

#

VERSAMAX MICROThe VersaMax Micro Controller is available in 14 or 28 Points as well as 23 Point with Analog. All VersaMax Micro Controllers are expandable. The 14-Point model has one RS-232 port (RJ-45) that can be used for SNP/SNPX Slave, Modbus RTU Slave and Serial In/Out communication. The RS-232 port (RJ-45) of the 23 point and 28 point models supports SNP/SNPX Slave whereas the second port is a RS-485 port (D-Sub) that can be used for SNP/SNPX Master/Slave, Modbus RTU Slave and Serial In/Out communication. Both ports can be used to download programs. Modems can easily be attached to either port. With the Serial I/O commands devices such as pagers, intelligent scales, bar code readers and printers can easily be interfaced to the controller.

A maximum of four expansion units can be connected to the VersaMax Micro controllers providing up to 140 digital I/O points. Expansion cable (0,1 Meter) is delivered together with each expansion model. The maximum distance between base and last expansion unit is two meters when using the optional expansion cables (IC200CBL505 or IC200CBL510).

The standard memory retention for the 14-Point Micro is 3 days and for the 23/28-Point Micro is 30 minutes. An optional battery (IC200ACC403) is available to increase memory retention on the 23/28-Point Micro to 2 months. The battery is not included with the units.

The following manuals are recommended for the VersaMax Nano and VersaMax Micro controller system: GFK-1645 VersaMax Nano and VersaMax Micro

VERSAMAX MICRO 14-POINT CONTROLLERSIC200UDR001 VersaMax Micro Controller 100/240 VAC Power Supply - 8 Inputs (24 VDC) / 6

Relay Outputs (2.0A)0.500

IC200UDR002 VersaMax Micro Controller 24 VDC Power Supply - 8 Inputs (24 VDC) / 6 Relay Outputs (2.0A)

0.433

IC200UDR003 VersaMax Micro Controller 12 VDC Power Supply - 8 Inputs (12 VDC) / 6 Relay Outputs (2.0A)

TBD

IC200UDD104 VersaMax Micro Controller 24 VDC Power Supply - 8 Inputs (24 VDC) / 6 Transistor Outputs (24 VDC; 2 x 1.0A, 4 x 0.5A)

0.415

IC200UAA003 VersaMax Micro Controller 100/240 VAC Power Supply - 8 Inputs (120 VAC) / 6 Outputs (120/240 VAC)

0.510

JANUARY 2003Page 1GE Fanuc Automation Europe

Item Status



(kg)


VERSAMAX MICRO 28-POINT CONTROLLERSIC200UDR005 VersaMax Micro Controller 120/240 VAC Power Supply - 16 Inputs (24 VDC) / 11

Relay Outputs (2.0A) / 1 Transistor Out (5/12/24 VDC)0.734

IC200UDR010 VersaMax Micro Controller 24 VDC Power Supply - 16 Inputs (24 VDC) / 11 Relay Outputs (2.0A) / 1 Transistor Out (5/12/24 VDC)

0.650

IC200UDR006 VersaMax Micro Controller 12 VDC Power Supply - 16 Inputs (12 VDC) / 11 Relay Outputs (2.0A) / 1 Transistor Out (5/12/24 VDC)

0.500


0.618


0.618

IC200UDD120 VersaMax Micro PLC 24 VDC Power Supply - 16 Digital In (24 VDC) / 12 Digital Out with ESCP (24 VDC; 2 x 1.0A, 10 x 0.7A)

0.618

IC200UAA007 VersaMax Micro Controller 100/240 VAC Power Supply - 16 Inputs (120 VAC) / 12 Outputs (120/240 VAC)

0.746

VERSAMAX MICRO 23-POINT ANALOG CONTROLLERSIC200UAL004 VersaMax Micro Controller 12 VDC Power Supply - 13 Inputs (24 VDC) / 9 Relay

Outputs (2.0A) / 1 Transistor Output (5/12/24 VDC) / 2 Analog Inputs (12 bits) / 1 Analog Output (12 bits)

0.734

IC200UAL005 VersaMax Micro Controller 24 VDC Power Supply - 13 Inputs (24 VDC) / 9 Relay Outputs (2.0A) / 1 Transistor Output (5/12/24 VDC) / 2 Analog Inputs (12 bits) / 1 Analog Output (12 bits)

0.734

IC200UAL006 VersaMax Micro Controller 100/240 VAC Power Supply - 13 Inputs (24 VDC) / 9 Relay Outputs (2.0A) / 1 Transistor Output (5/12/24 VDC) / 2 Analog Inputs (12 bits) / 1 Analog Output (12 bits)

0.734

VERSAMAX MICRO EXPANSIONSA maximum of four expansion units can be connected to a 14-, 23- or 28-point base model which provides up to140 digital I/O points. The expansion cable (0,1 Meter) is delivered together with each expansion model. The maximum distance between base and last expansion unit is two meters when using the optional expansion cables (IC200CBL505 or IC200CBL510).

VERSAMAX MICRO 14-POINT EXPANSIONSIC200UEX015 VersaMax Micro Expansion 12 VDC Power Supply - 8 Inputs (12 VDC) / 6

Transistor Out with 0,1 Meter Expansion CableTBD

IC200UEX013 VersaMax Micro Expansion 12 VDC Power Supply - 8 Inputs (12 VDC) / 6 Relay Outputs (2.0A) with 0,1 Meter Expansion Cable

TBD

IC200UEX014 VersaMax Micro Expansion 24 VDC Power Supply - 8 Inputs (24 VDC) / 6 DC Transistor Outputs (24 VDC) with 0,1 Meter Expansion Cable

0.412

IC200UEX012 VersaMax Micro Expansion 24 VDC Power Supply - 8 Inputs (24 VDC) / 6 Relay Outputs (2.0A) with 0,1 Meter Expansion Cable

0.433

IC200UEX122 VersaMax Micro Expansion 24 VDC Power Supply - 8 Inputs (24 VDC) / 6 DC Transistor Outputs with Electronic Short Circuit Protection (24 VDC, 2 x 1A, 4 x 0.7A) with 0,1 Meter Expansion Cable

0.412

IC200UEX011 VersaMax Micro Expansion 100/240VAC Power Supply - 8 Inputs (24 VDC) / 6 Relay Outputs (2.0A) with 0,1 Meter Expansion Cable

0.504


Item Status



(kg)


VERSAMAX MICRO 28-POINT EXPANSIONSIC200UEX213 VersaMax Micro Expansion 12 VDC Power Supply - 16 Inputs (12 VDC) / 12 Relay

Outputs. With 0,1 Meter Expansion Cable.0.504#

IC200UEX215 VersaMax Micro Expansion 12 VDC Power Supply - 16 Inputs (12 VDC) / 12 DC Transistor Outputs. With 0,1 Meter Expansion Cable

0.504#

IC200UEX212 VersaMax Micro Expansion 24 VDC Power Supply - 16 Inputs (24 VDC) / 12 Relay Outputs. With 0,1 Meter Expansion Cable.

0.504#

IC200UEX214 VersaMax Micro Expansion 24 VDC Power Supply - 16 Inputs (24 VDC) / 12 DC Transistor Outputs. With 0,1 Meter Expansion Cable

0.504#

IC200UEX222 VersaMax Micro Expansion 24 VDC Power Supply - 16 Inputs (24 VDC) / 12 DC Transistor Outputs with Electronic Short Circuit Protection (24 VDC, 2 x 1A, 4 x 0.7A) with 0,1 Meter Expansion Cable

0.504#

IC200UEX211 VersaMax Micro Expansion 120/240 VAC Power Supply - 16 Inputs (24 VDC) / 12 Relay Outputs. With 0,1 Meter Expansion Cable

0.504#

Note: The 28-Point Expansions require a VersaMax Micro Controller with Firmware 2.0 or greater as well as Programming Software either VersaPro 2.03 or greater or CIMPLICITY Logic Developer PLC 3.0 or greater.

VERSAMAX MICRO ANALOG EXPANSIONSIC200UEX616 VersaMax Micro Analog Expansion 12 VDC Power Supply, 4 Analog Inputs

(12Bit), 2 Analog Outputs (12Bit). With 0,1 Meter Expansion Cable.0.412#

IC200UEX626 VersaMax Micro Analog Expansion 24 VDC Power Supply, 4 Analog Inputs (12Bit), 2 Analog Outputs (12Bit). With 0,1 Meter Expansion Cable.

0.412#

IC200UEX636 VersaMax Micro Analog Expansion 120/240VAC Power Supply, 4 Analog Inputs (12Bit), 2 Analog Outputs (12Bit). With 0,1 Meter Expansion Cable.

0.412#

Note: The Analog Expansions require a VersaMax Micro Controller with Firmware 2.0 or greater as well as Programming Software either VersaPro 2.03 or greater or CIMPLICITY Logic Developer PLC 3.0 or greater.

VERSAMAX MICRO EXPANSION CABLESIC200CBL501 VersaMax Micro 0,1 Meter Expansion Cable (Qty 5).................................................. 0.095IC200CBL505 VersaMax Micro 0,5 Meter Expansion Cable.............................................................. 0.170IC200CBL510 VersaMax Micro 1,0 Meter Expansion Cable.............................................................. 0.210

VERSAMAX NANO & MICRO COMMUNICATIONIC200SET001 VersaMax SE - Serial to Ethernet Bridge. Includes Software, Manual and 4"

(10cm) RJ45 cable.0.450

Note: Serial to Ethernet Adapter User's Manual GFK-1852 included.


Item Status



(kg)


VERSAMAX NANO & MICRO ACCESSORIESIC200ACC402 VersaMax Micro Removable Terminal Strips (10 Pack).............................................. 0.490IC200ACC403 VersaMax Micro Battery for Data Retention (23 and 28 Point Models only)............... 0.050

Note: Battery life and back up time varies with temperature. Up to 5 months at 20°C.

IC200ACC413 VersaMax Micro Long-life Battery for Data Retention (23 and 28 Point Models only) 0.050Note: Battery life and back up time varies with temperature. Up to 10 months at 20°C.

*

IC200ACC404 VersaMax Micro Spare Parts Kit with two Terminal Strips, four Plastic Doors and four Covers

0.335

IC200ACC415 RS-232 to RS-485 Converter (Requires IC200CBL500 or Equivalent)....................... 0.030IC200KIT001 Series 90 Micro to VersaMax Micro Conversion Kit: VersaPro (IC640VPS002),

CAD files, Programming Cable and Manuals1.940

Note: Considered to support the transition from Series 90 Micro to VersaMax Micro.

IC690ACC901 RS-232 to RS-422/485 Miniconverter with programming cable (Consists of HE693SNPCBL and HE693XTADP)

0.100

IC690ACC903 RS-485 Port Isolator.................................................................................................... 0.250IC200ACC450 Input Simulator for VersaMax Nano (6 input switches)............................................... TBD

Note: The simulators have 6 inputs for the Nano and 8 inputs for the Micro. They will work with any DC input unit. This is a great training aide for workshops and trainings.

IC200ACC451 Input Simulator for VersaMax Micro (8 input switches)............................................... TBDNote: The simulators have 6 inputs for the Nano and 8 inputs for the Micro. They will work with any DC input unit. This is a great training aide for workshops and trainings.

VERSAMAX NANO & MICRO STARTER KITSIC200KEN911 VersaMax Nano Starter Kit including IC200NDR010, CIMPLICITY Machine

Edition Logic Developer PLC NanoMicro Edition programming software, programming cable, 6 Point Input Simulator, Getting Started Manual.

0.380*

IC200KEN912 VersaMax Micro Starter Kit including IC200UDD104, CIMPLICITY Machine Edition Logic Developer PLC NanoMicro Edition programming software, programming cable, 8 Point Input Simulator, Getting Started Manual.

0.380*

IC200KEN901 VersaMax Nano Starter Kit: Includes IC200NDR010, CIMPLICITY Logic Developer PLC Programming Software and programming cable, 6 Point Input Simulator, Workshop Student Guide (printed version)

0.380

IC200KEN902 VersaMax Micro Starter Kit: IC200UDD104, CIMPLICITY Logic Developer PLC Programming Software and programming cable, 8 Point Input Simulator, Workshop Student Guide (printed version)

0.380


Item Status



(kg)


PROGRAMMING SOFTWARE FOR VERSAMAX NANO & MICROGE Fanuc PLC’s are programmed with CIMPLICITY Machine Edition (ME), which is a suite of machine level software components to develop Control, HMI and Motion applications within a single unified working environment. CIMPLICITY ME development software runs on Windows 98, ME, NT4.0 or 2000.

As part of the CIMPLICITY ME family of products, VersaPro has been integrated into the unified working environment as Logic Developer PLC, which is fully compatible with existing VersaPro applications. Logic Developer PLC also allows users of Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and powerful tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro, Series 90-30 and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and problems that may have occurred with your system. Programming languages supported are Ladder Diagram (LD) and Instruction List (IL) and C-Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as View or Motion Developer. Please refer to the CIMPLICITY Machine Edition section for details.

Hardware support:-Logic Developer PLC Nano/Micro Edition supports VersaMax Nano/Micro and Series 90 Micro PLC’s.

Please also refer to the CIMPLICITY Machine Edition section to the end of the price list for more ordering information.

Note: The following manual is recommended for Logic Developer PLC:GFK-1918 Getting Started Logic Developer PLC. (Included on Machine Edition CD as pdf)

PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGESIC646MPM001 Logic Developer - PLC Nano/Micro Edition, single license, software only.................. 0.500*IC646MPM101 Logic Developer - PLC Nano/Micro Edition, single license, with Programming Cable 0.500

Note: Includes DB-9 to RJ45 programming cable to connect the Micro PLC to the serial port of a PC. (PN: IC200CBL500)

*

IC200CBL500 3,0 Meter Programming Cable (RJ-45 to DB-9 Pin) RS-232....................................... 0.137

Note: CIMPLICITY ME ships with a free 90-day software upgrade service. GE Fanuc strongly recommends to purchase a SAFE contract which provides 1 year of free upgrades and product support.

PROGRAMMING SOFTWARE UPGRADESIC646MPMU01 Logic Developer - PLC Nano/Micro Edition -Upgrade from VersaPro Nano/Micro,

single license. Proof of purchase required.0.500

Note: Requires previous version of VersaPro Nano/Micro or Logicmaster Series 90-Micro. Please provide proof of purchase (PO#).

*

PROGRAMMING SOFTWARE UPGRADE SERVICE & PRODUCT SUPPORT (SAFE)SA648MPM001 SAFE for Logic Developer -PLC Micro single license................................................. 0.500*

Note: With CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls to Technical Support Help Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY Machine Edition remote troubleshooting. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on an annual basis. The Technical Support helpdesk is available for 3 callers. Additional callers may be purchased using catalog # IC648SAF000. Access for the Technical Support Help Desk is 7 AM to 8 PM Eastern Standard Time.

LEGACY PROGRAMMING SOFTWAREGE Fanuc recommends using CIMPLICITY Machine Edition to program GE Fanuc PLC’s. Previous programming software packages such as VersaPro, Control or Logicmaster are available and are continuously enhanced with features and product support. Please refer to the software section to the end of the price list for ordering information.


Item Status



(kg)


VERSAMAX NANO & MICRO DOCUMENTATIONGFK-1645 VersaMax Nano/ Micro User's Manual English........................................................... 0.641GFK-1645A-GE VersaMax Nano and VersaMax Micro User's Manual - German................................. TBDGFK-1645A-FR VersaMax Nano and VersaMax Micro User's Manual - French.................................. TBDGFK-1645A-IT VersaMax Nano and VersaMax Micro User's Manual - Italian.................................... TBDGFK-1645A-SP VersaMax Nano/Micro User's Manual - Spanish......................................................... TBDGFK-1670 VersaPro User's Manual - English............................................................................... 0.373GFK-1852 VersaMax SE - Serial to Ethernet Adapter User's Manual.......................................... TBDIC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095

Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field Control, Operator Interfaces and motion control products. Includes one year subscription service for free upgrades with product registration.

IC690CDP002 InfoLink CD Rom Library Product Information Library - 10 Pack................................. TBDNote: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field Control, Operator Interfaces and motion control products.

IC648MNT101 One Year Maintenance Service for Infolink CD Rom Library...................................... TBDNote: For registered users only.

GFN-037 VersaMax Micro Workshop Student Guide (using VersaPro programming software). TBD


Item Status

VERSAMAX® CONTROLLER & I/O PRODUCTS


(kg)


VERSAMAX CENTRAL PROCESSOR UNITS (CPU)IC200CPU001 CPU 12K User Progr. 1.8 msec/K Boolean (One RS232 and one RS485 Serial

Ports)0.260

IC200CPU002 CPU 20K User Progr. 1.8 msec/K Boolean (One RS232 and one RS485 Serial Ports)

0.230

IC200CPU005 CPU 64K User Progr. 0.8 msec/K Boolean (One RS232 and one RS485 Serial Ports)

TBD

Note: Requires power supply with expanded 3.3 VDC

IC200CPUE05 CPU 64K User Progr. 0.8 msec/K Boolean with 10 BaseT Ethernet Interface............ TBDNote: Requires power supply with expanded 3.3 VDC

Note: Manual # GFK-1503 is recommended for the VersaMax PLC System

VERSAMAX NETWORK INTERFACE UNITSIC200GBI001 Remote I/O Genius Network Interface Unit (NIU)........................................................ 0.276

Note: Manual # GFK-1535 is recommended for the Genius NIU

IC200PBI001 Remote I/O Profibus-DP Network Interface Unit (NIU)................................................ 0.300Note: Manual # GFK-1534 is recommended for the Profibus-DP NIU

IC200DBI001 Remote I/O DeviceNet Network Interface Unit (NIU).................................................. 0.290Note: Manual # GFK-1533 is recommended for the DeviceNet NIU

IC200EBI001 Remote I/O Ethernet Network Interface Unit (NIU)..................................................... TBD

VERSAMAX COMMUNICATION MODULESIC200BEM002 PLC Network Communication Profibus-DP (Slave)..................................................... 0.272

Note: Profibus Communication Modules must be used in a system containing a CPU.

IC200BEM103 PLC Network Communication DeviceNet (Master)..................................................... 0.200Note: DeviceNet Communication Modules must be used in a system containing a CPU.

IC200BEM104 PLC Network Communication ASi ( Master)............................................................... 0.100Note: AS-I Network Communication Modules can be used in NIU and CPU systems.

*

Note: Communication Modules always require a Communication Carrier CHS006.

VERSAMAX EXPANSIONIC200ERM002 Expansion Receiver, Non-Isolated.............................................................................. 0.225

Note: Expansion receiver module for use in distances less than or equal to 15 meters. Can be mixed with ERM001. Expansion systems using an ERM001 will operate at a lower throughput speed.

IC200ERM001 Expansion Receiver, Isolated...................................................................................... 0.200Note: Isolated expansion receiver module for use in distances greater than 15 meters but less than 750 meters or applications requiring isolation. Operates at a lower throughput speed than ERM002 solution. Can be mixed with ERM002.

IC200ETM001 Expansion Transmitter................................................................................................. 0.200Note: Expansion transmitter module for use in multidrop or distance greater than 1 meter. Not required for point to point with distance less than 1 meter.


Item Status



(kg)


VERSAMAX POWER SUPPLIESIC200PWR201 Power Supply 12VDC Input......................................................................................... 0.250

Note: Logic side supply of 1.5 amps maximum. Up to 0.25 amps can be allocated for 3.3V usage.

*

IC200PWR202 Power Supply with expanded 3.3VDC 12VDC Input................................................... 0.250Note: Logic side supply of 1.5 amps maximum. Up to 1.0 amps can be allocated for 3.3V usage.

*

IC200PWR001 Power Supply 24VDC Input......................................................................................... 0.250Note: Logic side supply of 1.5 amps maximum. Up to 0.25 amps can be allocated for 3.3V usage.

IC200PWR002 Power Supply with expanded 3.3VDC 24VDC Input................................................... 0.250Note: Logic side supply of 1.5 amps maximum. Up to 1.0 amps can be allocated for 3.3V usage.

IC200PWR101 Power Supply 120/240VAC Input................................................................................ 0.263Note: Logic side supply of 1.5 amps maximum. Up to 0.25 amps can be allocated for 3.3V usage.

IC200PWR102 Power Supply with expanded 3.3VDC 120/240VAC Input.......................................... 0.258Note: Logic side supply of 1.5 amps maximum. Up to 1.0 amps can be allocated for 3.3V usage.

IC200PWB001 Power Supply Booster Carrier..................................................................................... 0.236Note: Required to add additional power supplies into station. Additional power supplies mey be needed for certain configurations where power requirements exceed the capacity of a single supply. Works with any IC200PWRxxx supply.

Note: Manual # GFK-1504 is recommended for the VersaMax Power Supplies


Item Status



(kg)


VERSAMAX CARRIERSIC200CHS022 Compact I/O Carrier IEC Style.................................................................................... 0.360IC200CHS002 I/O Carrier IEC Style.................................................................................................... 0.360IC200CHS025 Compact I/O Carrier Spring Clamp Style..................................................................... 0.354IC200CHS005 I/O Carrier Spring Clamp Style.................................................................................... 0.354IC200CHS001 I/O Carrier Barrier Style............................................................................................... 0.373IC200CHS003 I/O Carrier Connector Style......................................................................................... 0.300IC200CHS012 I/O Interposing IEC Style............................................................................................. 0.334IC200CHS014 I/O Interposing IEC Style (Thermocouple Cold Junction Compensation).................... 0.340IC200CHS015 I/O Interposing Spring Style......................................................................................... 0.600IC200CHS011 I/O Interposing Barrier Style........................................................................................ 0.310IC200CHS101 I/O Interposing Disconnect Terminals......................................................................... TBD*IC200CHS102 Interposing Disconnect Terminals Expansion............................................................. TBD

Note: Includes ribbon cable to connect to CHS101.

*

IC200CHS111 I/O Interposing Relay Terminals, Fused 16PT............................................................ TBDNote: For use with IC200MDL740.

*

IC200CHS112 Interposing Relay Terminals, Fused 16PT Expansion.............................................. TBDNote: For use with IC200MDL750. Includes ribbon cable to connect to CHS111.

*

IC200TBM002 I/O Carrier Auxillary IEC Style..................................................................................... 0.192IC200TBM005 I/O Carrier Auxillary Spring Clamp Style..................................................................... 0.164IC200TBM001 I/O Carrier Auxillary Barrier Style................................................................................ 0.169IC200CHS006 Communications Carrier.............................................................................................. 0.221IC200PWB001 Power Supply Booster Carrier..................................................................................... 0.236

Note: Required to add additional power supplies into station. Additional power supplies mey be needed for certain configurations where power requirements exceed the capacity of a single supply. Works with any IC200PWRxxx supply.

Note: Manual # GFK-1504 is recommended for the VersaMax Carriers

VERSAMAX DISCRETE INPUT MODULESIC200MDL643 Input 5/12VDC Pos./Neg. Logic (2 Groups of 8) 16PT................................................ 0.231IC200MDL644 Input 5/12VDC Pos. Logic (4 Groups of 8) 32PT........................................................ 0.265IC200MDL640 Input 24VDC Pos./Neg. Logic (2 Groups of 8) 16PT................................................... 0.231IC200MDL650 Input 24VDC Pos./Neg. Logic (4 Groups of 8) 32PT................................................... 0.265IC200MDL635 Input 48VDC Pos./Neg. Logic (2 Groups of 8) 16PT................................................... 0.231IC200MDL636 Input 48VDC Pos./Neg. Logic (4 Groups of 8) 32PT................................................... 0.265IC200MDL140 Input 120VAC (1 Group of 8) 8PT............................................................................... TBDIC200MDL240 Input 120VAC (2 Groups of 8) 16PT........................................................................... 0.260IC200MDL141 Input 240VAC (1 Group of 8) 8PT............................................................................... TBDIC200MDL241 Input 240VAC (2 Groups of 8) 16PT........................................................................... 0.255

Note: Manual # GFK-1504 is recommended for the VersaMax I/O Modules


Item Status



(kg)


VERSAMAX DISCRETE OUTPUT MODULESIC200MDL730 Output 24VDC Pos. Logic 2.0A per PT (1 Group of 8) w/ESCP 8PT.......................... 0.279IC200MDL740 Output 24VDC Pos. Logic 0.5A per PT (1 Group of 16) 16PT.................................... 0.235IC200MDL741 Output 24VDC Pos. Logic 0.5A per PT (1 Group of 16) w/ESCP 16PT...................... 0.235IC200MDL742 Output 24VDC Pos. Logic 0.5A per PT (2 Groups of 16) w/ESCP 32PT.................... 0.200IC200MDL750 Output 24VDC Pos. Logic 0.5A per PT (2 Groups of 16) 32PT.................................. 0.270IC200MDL743 Output 5/12/24VDC Neg. Logic 0.5A per PT (1 Groups of 16) 16PT......................... 0.200IC200MDL744 Output 5/12/24VDC Neg. Logic 0.5A per PT (2 Groups of 16) 32PT.......................... 0.200IC200MDL329 Output 120VAC 0.5A per PT isolated 8PT.................................................................. TBDIC200MDL330 Output 120VAC 0.5A per PT isolated 16PT................................................................ 0.284IC200MDL331 Output 120VAC 2.0A per PT isolated 8PT.................................................................. 0.382


VERSAMAX MIXED DISCRETE MODULESIC200MDD840 Mixed 24VDC Pos. Logic Input 20PT / Output Relay 2.0A per PT 12PT.................... 0.283IC200MDD841 Mixed 24VDC Pos. Logic Input GRP 20PT / Output 24VDC 0.5A 12PT / HSC /

PWM / PT0.299*

IC200MDD842 Mixed 24VDC Pos. Logic Input 16PT / Output 24VDC 0.5A with ESCP 16PT........... 0.273IC200MDD843 Mixed 24VDC Pos. Logic Input 10PT / Output Relay 2.0A per PT 6PT...................... 0.242IC200MDD844 Mixed 24VDC Pos. Logic Input 16PT / Output 24VDC 0.5A 16PT............................. 0.269IC200MDD845 Mixed 24VDC Pox. Logic Input 16PT / Output Relay 2.0A per PT isolated 8PT......... 0.276*IC200MDD846 Mixed 120VAC Input 8PT / Output Relay 2.0A per PT isolated 8PT........................... TBD*IC200MDD847 Mixed 240VAC Input 8PT / Output Relay 2.0A per PT isolated 8PT........................... 0.290*IC200MDD848 Mixed 120VAC Input 8 PT / Output 120VAC 0.5A per PT isolated 8PT..................... TBD*


VERSAMAX RELAY OUTPUT MODULESIC200MDL930 Output Relay 2.0A per PT Isolated, Form A 8PT........................................................ 0.244IC200MDL940 Output Relay 2.0A per PT Isolated, Form A 16PT...................................................... 0.300


VERSAMAX ANALOG INPUT MODULESIC200ALG230 Analogue Input 12 BIT Voltage/Current 4CH.............................................................. 0.600IC200ALG260 Analogue Input 12 BIT Voltage/Current 8 CH............................................................. 0.240IC200ALG240 Analogue Input 16 BIT Voltage/Current Isolated 8 CH................................................ 0.308IC200ALG261 Analogue Input 15 BIT Differential Voltage 8 CH........................................................ 0.240*IC200ALG262 Analogue Input 15 BIT Differential Current 8 CH........................................................ 0.240*IC200ALG263 Analogue Input 15 BIT Voltage 15 CH........................................................................ 0.240*IC200ALG264 Analogue Input 15 BIT Current 15 CH......................................................................... 0.240*IC200ALG620 Analogue Input 16 BIT RTD 4CH................................................................................ 0.309IC200ALG630 Analogue Input 16 BIT Thermocouple 7CH................................................................ 0.299

Note: May be used with cold compensation interposing terminal CHS014.



Item Status



(kg)


VERSAMAX ANALOG OUTPUT MODULESIC200ALG320 Analogue Output 12 BIT Current 4CH......................................................................... 0.263IC200ALG321 Analogue Output 12 BIT Voltage 0-10V 4CH............................................................. 0.258IC200ALG322 Analogue Output 12 BIT Voltage +/-10V 4CH............................................................. 0.262IC200ALG331 Analogue Output 16 BIT Voltage/Current Isolated 4 CH............................................. 0.285*IC200ALG325 Analogue Output 13 BIT Voltage 8CH......................................................................... 0.262*IC200ALG327 Analogue Output 13 BIT Voltage 12CH....................................................................... 0.262*


VERSAMAX MIXED ANALOG MODULESIC200ALG430 Analogue Mixed 12 BIT Input Current 4CH and Output Current 2CH......................... 0.300*IC200ALG431 Analogue Mixed 12 BIT 0-10V Input 4CH and Output 2CH....................................... 0.290IC200ALG432 Analogue Mixed 12 BIT -10V to +10V Input 4CH and Output 2CH............................ 0.290*


VERSAMAX CABLESIC200CBL105 Cable, I/O Non-Shielded 2 Connectors 0.5m.............................................................. 0.200IC200CBL110 Cable, I/O Non-Shielded 2 Connectors 1.0m.............................................................. 0.400IC200CBL120 Cable, I/O Non-Shielded 2 Connectors 2.0m.............................................................. 0.590IC200CBL230 Cable, I/O Non-Shielded 1 Connectors 3.0m.............................................................. 0.810IC200CBL001 Cable, CPU Programming RS-232.............................................................................. 0.150IC200CBL002 Cable, NIU Configuration/Upgrade.............................................................................. 0.085

Note: Required to upgrade NIU firmware or modules requiring firmware upgrade in a NIU station.

IC200CBL600 Expansion Cable, Shielded, Single Ended, 1m........................................................... 0.140Note: For use in single ended applications only. Does not require IC200ACC201 terminator plug. Only allows 1 expansion drop.

IC200CBL601 Expansion Cable, Shielded, 2 Connectors, 1m........................................................... 0.135Note: For use in single ended or multidrop applications. Requires IC200ACC201 terminator plug for the last station on the expansion network. Maximum of 7 expansion stations.

IC200CBL602 Expansion Cable, Shielded, 2 Connectors, 2m........................................................... 0.215Note: For use in single ended or multidrop applications. Requires IC200ACC201 terminator plug for the last station on the expansion network. Maximum of 7 expansion stations.

IC200CBL615 Expansion Cable, Shielded, 2 Connectors, 15m......................................................... 1.230Note: For use in single ended or multidrop applications. Requires IC200ACC201 terminator plug for the last station on the expansion network. Maximum of 7 expansion stations.


Item Status



(kg)


VERSAMAX ACCESSORIESIC200ACC003 VersaMax EZ Program Store Device.......................................................................... 0.100

Note: Allows storing of programs to PLC CPU without the need of a computer. Similar to EEPROM usage on Series 90-30 CPU311. Supports CPU001-CD and above, CPU002, CPU005 and CPUE05.

IC200ACC001 Replacement Battery for VersaMax CPU (Qty 1)........................................................ 0.100*IC200ACC301 I/O Filler....................................................................................................................... TBDIC200ACC302 I/O Input Simulator....................................................................................................... 0.045

Note: For 24VDC inputs only. Supplies switches for up to 16 inputs. Can only be used with I/O carrier CHS002, interposing terminal CHS012 or auxiliary terminal TBM002

IC200ACC303 I/O Shorting Bar (Qty. 2).............................................................................................. 0.074IC200ACC304 I/O Cable Connector Kit (Qty. 2).................................................................................. 0.158IC200ACC201 Expansion Terminator, Qty. 1...................................................................................... TBD

Note: One required for last expansion drop.

IC200ACC202 Expansion Connectors, Qty. 2..................................................................................... TBDNote: Expansion Bus Connector Kit (2 connectors, 52 pins + 4 spares, 2 shielded backshells). Crimping tool not included.

PROGRAMMING SOFTWARE FOR VERSAMAX PLC'SGE Fanuc PLC’s are programmed with CIMPLICITY Machine Edition (ME), which is a suite of machine level software components to develop Control, HMI and Motion applications within a single unified working environment. CIMPLICITY ME development software runs on Windows 98, NT4.0 or 2000.

As part of the CIMPLICITY ME family of products, VersaPro has been integrated into the unified working environment as Logic Developer PLC, which is fully compatible with existing VersaPro-based applications. Logic Developer PLC also allows users of Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and powerful tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro, Series 90-30 and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and problems that may have occurred with your system. Programming languages supported are Ladder Diagram (LD) and Instruction List (IL) and C-Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as View or Motion Developer. Please refer to the CIMPLICITY Machine Edition section for details.

Hardware support:-Logic Developer PLC Standard Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90-30 and Series 90 Micro PLC’s. -Logic Developer PLC Configuration Tools provides support for VersaMax Remote I/O.


PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGESIC646MPS001 Logic Developer - PLC Standard Edition - single license, software only..................... 0.500

Note: Includes GE Fanuc's InfoLink CD with electronic documentation for VersaMax and Series 90 PLCs.

*

IC646MPS101 Logic Developer - PLC Standard Edition, single license, with Programming Cable and RS485 Mini-Converter

0.500

Note: Includes RS-232 to RS-422/485 Miniconverter (DB-9 to DB-15) with DB-9 Serial PC cable to connect the PLC to the serial port of a PC (2m). (Catalog # HE693SNPCBL)

*



Item Status



(kg)


PROGRAMMING SOFTWARE REMOTE I/O MANAGERIC646MPC001 Logic Developer - PLC Configuration Tools................................................................ 0.500

Note: This tool is required to configure the VersaMax Remote IO (Network Interface Units). It is included in Logic Developer PLC Standard or Professional Edition.

*

IC646MPC101 Logic Developer - PLC Configuration Tools with Programming Cable........................ 0.500*

Note: The Remote I/O Manager is a stand-alone application used to configure PLC hardware as well as VersaMax Network Interface Units (NIU). The Remote I/O Manager is included in Logic Developer PLC Standard Edition. It is also available as a stand-alone product called 'Logic Developer PLC Configuration Tools'. The stand-alone product is recommended to users of VersaMax NIU’s who do not use GE Fanuc PLC’s.

PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGESIC646MPS005 Logic Developer - PLC Standard Edition - 5 Pack....................................................... 0.500*IC646MPS010 Logic Developer - PLC Standard Edition - 10 Pack..................................................... 0.500*IC646MPS025 Logic Developer - PLC Standard Edition - 25 Pack..................................................... 0.500*IC646MPS050 Logic Developer - PLC Standard Edition - 50 Pack..................................................... 0.500*IC646MPSS50 Logic Developer - PLC Standard Edition - 50 Seat Site License................................. 0.500*IC646MPSS99 Logic Developer - PLC Standard Edition - Unlimited Seat Site License...................... 0.500

Note: Please contact GE Fanuc or an authorized distribution partner of GE Fanuc for quotation.

*


PROGRAMMING SOFTWARE DEMO PACKAGESIC646MED010 Machine Edition Demo 10 Pack.................................................................................. 2.978

PROGRAMMING SOFTWARE UPGRADESIC646MPSU01 Logic Developer - PLC Standard Edition, single license, Upgrade from Logicmaster

90-30 or Control. (Serial number required with valid subscription service).0.500

Note: Requires a registered copy of VersaPro Standard Edition, Control or Logicmaster Series 90-30 with valid subscription service. Please provide serial number.

*

IC646MPSU11 Logic Developer - PLC Standard Edition, single license, Upgrade from VersaPro Standard Edition, Logicmaster 90-30 or Control. (Serial number required, valid subscription service not required)

0.500

Note: Requires a registered copy of VersaPro Standard Edition, Control or Logicmaster Series 90-30. Please provide serial number.

*

PROGRAMMING SOFTWARE UPGRADE SERVICE & TECHNICAL SUPPORT (SAFE)SA648MPS001 SAFE for Logic Developer -PLC Standard single license............................................ 0.500*SA648MPS005 SAFE for Logic Developer -PLC Standard 5 Pack...................................................... 0.500*SA648MPS010 SAFE for Logic Developer -PLC Standard 10 Pack.................................................... 0.500*SA648MPS025 SAFE for Logic Developer -PLC Standard 25 Pack.................................................... 0.500*SA648MPS050 SAFE for Logic Developer -PLC Standard 50 Pack.................................................... 0.500*SA648MPSS50 SAFE for Logic Developer -PLC Standard 50 Seat Site License................................ 0.500*SA648MPSS99 SAFE for Logic Developer -PLC Standard Unlimited Seat Site License..................... 0.500*



Item Status



(kg)


LEGACY PROGRAMMING SOFTWAREGE Fanuc recommends using CIMPLICITY ME to program GE Fanuc PLC’s. Previous programming software packages such as VersaPro, Control or Logicmaster are available and are continuously enhanced with features and product support. Please refer to the software section to the end of the price list for ordering information.

VERSAMAX DOCUMENTATIONGFK-xxxx VersaMax/Series 90-30/20/Micro Manuals (per manual)............................................IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095





Item Status

SERIES 90™-30 CONTROLLER & I/O PRODUCTS


(kg)


SERIES 90-30 CENTRAL PROCESSOR UNITS (CPU)IC693CPU311 Base 5 Slot with integrated CPU Model 311 (6K Bytes User Program)...................... 0.553IC693CPU313 Base 5 Slot with integrated CPU Model 313 (12K Bytes User Program, 0.6 ms/K

Boolean Execution)0.556

IC693CPU323 Base 10 Slot with integrated CPU Model 313 (12K Bytes User Program, 0.6 ms/K Boolean Execution)

0.953

IC693CPU350 CPU Model 350 Module (32K Bytes User Program, 0.22 ms/K Boolean Execution).. 0.284IC693CPU331 CPU Model 331 Module (16K Bytes User Program, 0.4 ms/K Boolean Execution).... 0.271

Note: Recommended Replacement: CPU350

IC693CPU360 CPU Model 360 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution)

0.200

Note: Runs 6 times faster than CPU341.

IC693CPU341 CPU Model 341 Module (80K Bytes User Program, 0.3 ms/K Boolean Execution).... 0.339Note: Recommended Replacement: CPU360

IC693CPU363 CPU Model 363 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution) w/ two Build In Serial Ports

0.417

Note: Backward compatible with CPU351 with the exception of built in port connectors are totated 180 degress.

IC693CPU351 CPU Model 351 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution) w/ two built in Serial Ports

0.317

Note: Replaced by IC693CPU363

IC693CPU364 CPU Model 364 Module (240K Bytes, 0.22 ms/K Boolean Execution) w/ Build In Ethernet TCP/IP Interface

0.400

Note: May require using high capacity power supply IC693PWR330 or PWR331 for some systems since CPU consumes approximately 7.5 Watts.

IC693CPU374 CPU Model 374 Module (240K Bytes, 0.15 ms/K Boolean Execution) w/ Build In 10/100 MBit Ethernet TCP/IP Interface

0.400

Note: Requires CIMPLICITY ME Ver. 2.60 or higher -or- VersaPro 2.03 or higher.

*

IC693CPU352 CPU Model 352 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution) with HW Floating Point Math. Processor. Two built in Serieal Ports

0.386

Note: The following manuals are recommended for the 90-30 PLC System: GFK-0356, GFK-0898. The battery for the CPU is now included in the CPU box. The battery must be install into the power supply.

SERIES 90-30 BASES (USE WITH CPU331 and higher)IC693CHS391 10 Slot Base................................................................................................................ 0.948IC693CHS392 10 Slot Expansion Base with I/O Bus Terminator........................................................ 0.930IC693CHS393 10 Slot Remote Expansion Base with I/O Bus Terminator (Up to 213m).................... 0.943IC693CHS397 5 Slot Base.................................................................................................................. 0.590IC693CHS398 5 Slot Expansion Base with I/O Bus Terminator.......................................................... 0.620IC693CHS399 5 Slot Remote Expansion Base with I/O Bus Terminator (Up to 213m)...................... 0.557

Note: Manual GFK-0898 is recommended for Racks and I/O modules.


Item Status



(kg)


SERIES 90-30 POWER SUPPLIESIC693PWR321 Power Supply 100-240 Vac, 30W................................................................................ 0.948IC693PWR330 Power Supply 100-240 Vac, 30W (High Capacity 5V)................................................. 0.544IC693PWR332 Power Supply 12 Vdc, 30W (High Capacity 5V)......................................................... 0.544*IC693PWR331 Power Supply 24 Vdc, 30W (High Capacity 5V)......................................................... 0.544

Note: Replaces PWR322

IC693PWR328 Power Supply 48 Vdc, 30W........................................................................................ 0.544Note: Replaces PWR322

IC693PWR322 Power Supply 24/48 Vdc, 30W.................................................................................... 0.400Note: Replaced by PWR331 for 24VDC and PWR328 for 48VDC

@

IC693ACC350 Redundant Power Supply Adapter Module................................................................. TBDIC693ACC340 Redundant Power Supply Baseplate with 0.125 Meter Cable..................................... TBDIC693ACC341 Redundant Power Supply Baseplate with 0.6 Meter Cable......................................... TBDHE693PWR524 Power Supply Adapter for redundant power supplies.................................................. 0.482

Note: Replaced by IC693ACC350 and ACC340 / ACC341

Note: Manual GFK-0898 is recommended for Racks and I/O modules. Battery is not included. Battery is now included in the CPU box.

SERIES 90-30 DISCRETE INPUT MODULESIC693MDL654 5-12 Vdc Input, Pos./Neg. Logic (32 points),............................................................... 0.273

Note: Requires one or two of the following cables: IC693CBL315 / 327 / 328 / 329 / 330 / 331 / 332 / 333 / 334 or one of the following connectors: IC693ACC316 / 317 / 318.

IC693MDL634 24 Vdc Input, Pos./Neg. Logic (8 points)..................................................................... 0.272IC693MDL645 24 Vdc Input, Pos./Neg. Logic (16 points), 7ms.......................................................... 0.269IC693MDL646 24 Vdc Input, Pos./Neg. Logic (16 points), 1ms.......................................................... 0.272IC693MDL241 24 Vac/dc Input (16 points).......................................................................................... 0.272IC693MDL655 24 Vdc Input, Pos./Neg. Logic (32 points),.................................................................. 0.023

Note: Requires one or two of the following cables: IC693CBL315 / 327 / 328 / 329 / 330 / 331 / 332 / 333 / 334 or one of the following connectors: IC693ACC316 / 317 / 318.

IC693MDL648 48 Vdc Input, Pos./Neg. Logic (16 points), 1ms.......................................................... 0.272*IC693MDL632 125 Vdc Input, Pos./Neg. Logic (8 points)................................................................... 0.522IC693MDL230 120 Vac Isolated Input (8 points)................................................................................. 0.317IC693MDL240 120 Vac Input (16 points)............................................................................................ 0.317IC693MDL231 240 Vac Isolated Input (8 points)................................................................................. 0.295



Item Status



(kg)


SERIES 90-30 DISCRETE OUTPUT MODULESIC693MDL732 12/24 Vdc Output, 0.5 A, Pos. Logic (8 points)........................................................... 0.295IC693MDL733 12/24 Vdc Output, 0.5 A, Neg. Logic (8 points)........................................................... 0.272IC693MDL730 12/24 Vdc Output, 2 A, Pos. Logic (8 points).............................................................. 0.352IC693MDL731 12/24 Vdc Output, 2 A, Neg. Logic (8 points).............................................................. 0.340IC693MDL740 12/24 Vdc Output, 0.5 A, Pos. Logic (16 points)......................................................... 0.278IC693MDL741 12/24 Vdc Output, 0.5 A, Neg. Logic (16 points)......................................................... 0.292IC693MDL742 12/24 Vdc Output, 1 A, Pos. Logic, with Overload Protection (16 points)................... 0.295IC693MDL752 5-24 Vdc (TTL) Output, 0.3 A, Neg. Logic (32 points)................................................. 0.279

Note: Requires one or two of the following cables: IC693CBL315 / 327 / 328 / 329 / 330 / 331 / 332 / 333 / 334 or one of the following connectors: IC693ACC 316 /317 /318.

IC693MDL753 24 Vdc Output, Pos. Logic (32 points)......................................................................... 0.272Note: Requires one or two of the following cables: IC693CBL315 / 327 / 328 / 329 / 330 / 331 / 332 / 333 / 334 or one of the following connectors: IC693ACC 316 /317 /318.

IC693MDL748 48 Vdc Output, 0.5 A, Pos. Logic (8 points)................................................................ 0.295*IC693MDL734 125 Vdc Output (6 Points)........................................................................................... 0.272IC693MDL340 120 Vac Output, 0.5 A (16 points)............................................................................... 0.408IC693MDL330 120/240 Vac Output, 1 A (8 points)............................................................................. 0.359IC693MDL390 120/240 Vac, Isolated Output, 2 A (5 points)............................................................... 0.340IC693MDL930 Relay Output, 4A Isolated, (8 points)........................................................................... 0.323IC693MDL931 Relay Output, 8A Isolated, N.C. & Form C (8 points).................................................. 0.341IC693MDL940 Relay Output, 2A (16 points)....................................................................................... 0.363


SERIES 90-30 MIXED I/O MODULESIC693ALG442 Analogue Combo Module, -10 to +10V, 0-20mA, 4 Ch. In (12Bit) / 2 Ch. Out (16Bit) 0.200IC693MDR390 24 Vdc Input (8 points), Relay Output (8 points)......................................................... 0.295IC693MAR590 120 Vac Input (8 points), Relay Output (8 points)....................................................... 0.295



Item Status



(kg)


SERIES 90-30 ANALOG INPUT MODULESIC693ALG220 Analogue Input, -10 to +10V 12 Bit, 4 to 20mA 10 Bit (4 Channels)........................... 0.363IC693ALG221 Analogue Input, 4 to 20mA 12 Bit (4 Channels).......................................................... 0.357IC693ALG222 Analogue Input Voltage (16 Single Channels or 8 Differential Channels)................... 0.340IC693ALG223 Analogue Input Current (16 Single Channels)............................................................. 0.345HE693RTD600 RTD (PT100, Ni-120) Input Module (6 Channels), 0.5°C resolution from -100 to

850°C0.524

HE693RTD601 RTD (PT100, Ni-120) Input Module (6 Channels), 0,125°C resolution from -100 to 260°C

0.524

HE693RTD660 RTD Isolated Input Module (6 Channels), 0,5°C resolution........................................ 0.539HE693RTD665 RTD Isolated Input Module (6 Channels), 0,5°C resolution, 50Hz Filter..................... 0.524HE693RTD666 RTD Isolated Input Module (6 Channels), 0,5°C resolution, 60Hz Filter..................... 0.539HE693THM409 Thermocouple (J, K, N, T, E, R, S) Input Module, 0.5°C resolution (4 Channels)....... 0.553HE693THM449 Thermocouple (J, K, N, T, E, R, S) Input Module, 0.5°C resolution (4 Channels),

Open Circuit Feedback0.500

HE693THM665 Isolated Thermocouple (6 Channels), 1500V process-ground, 250V ch-ch, 50Hz filter

0.565

HE693THM666 Isolated Thermocouple (6 Channels), 1500V process-ground, 250V ch-ch, 60Hz filter

0.730

HE693THM668 Isolated Thermocouple (6 Channels), 1500V process-ground, 250V ch-ch................ 2.100HE693THM809 Thermocouple (J, K, N, T, E, R, S) Input Module, 0.5°C resolution (8 Channels)....... 0.500HE693THM884 Thermocouple (J, K, N, T, E, R, S, B, C) Input Module, 0.1°C resolution (8

Channels), Advanced Features0.595

HE693THM888 Thermocouple (J, K, N, T, E, R, S) Input Module, 0.1°C resolution (8 Channels), High Noise Filtering

0.750

HE693THM889 Thermocouple (J, K, N, T, E, R, S) Input Module, 0.5°C resolution (8 Channels), Open Circuit Feedback

0.550

HE693THM166 Thermocouple (J, K, N, T, E, R, S) Input Module, 0.5°C resolution (16 Channels), Open Circuit Feedback

0.510

HE693ISOBLK DIN rail mountable Cold Junction Compensation Block (works w/ THM665, THM668, THM884 and THM888)

0.553

HE693STG883 Millivolt/Strain Gage Analog Input Module +/-20mV, +/-25mV,+/-30mV, 16 Bit (8 Channels)

0.553

HE693STG884 Millivolt/Strain Gage Analog Input Module +/-25mV, +/-50mV,+/-100mV, 16 Bit (8 Channels)

0.560

HE693ADC405 Isolated Analog Input Module (500VAC Isolation), +/-10VDC, 14 Bit (4 Channels).... 0.524HE693ADC415 Isolated Analog Input Module (500VAC Isolation), 4-20 or +/-20mA, 13 Bit (4

Channels)0.595

HE693ADC816 Isolated Analog Input Module, +/-10VDC High Speed Analog Input, 16 Bit (8 Channels)

0.510

HE693CALKIT Calibration Kit for all HE Analog Modules (Only required for recalibration)................. 0.397


SERIES 90-30 ANALOG OUTPUT MODULESIC693ALG390 Analogue Output, -10 to +10V, 12 Bit (2 Channels).................................................... 0.342IC693ALG391 Analogue Output, 4 to 20mA 12 Bit (2 Channels)....................................................... 0.340IC693ALG392 Analogue Output, Voltage/Current, 16Bit (8 Channels)............................................... 0.100HE693DAC410 Isolated Analog Output Module (1500VAC Isolation), +/-10VDC, 14 Bit (4

Channels)0.595

HE693DAC420 Isolated Analog Output Module (1500VAC Isolation), 4-20 or 0-20mA, 13 Bit (4 Channels)

0.595

Note: Manual # GFK-0898 is recommended for Racks and I/O modules.


Item Status



(kg)


SERIES 90-30 SPECIAL FUNCTION MODULESIC693ACC300 Input Simulator Module (16 Points)............................................................................. 0.181IC693APU300 High Speed Counter, 80 KHz...................................................................................... 0.346

Note: The following manual is recommended for the Series 90™-30 High-Speed Counter: GFK-0293

IC693APU305 I/O Processor Module.................................................................................................. 0.363Note: The following manual is recommended for the Series 90™-30 I/O processor: GFK-1028

IC693TCM302 Temperature Control Module....................................................................................... 0.350IC693TCM303 Temperature Control Module Extended Range........................................................... TBDIC693PTM100 Power Transducer Module (Incl. Module, Interface, 0.5m Cable)............................... 0.435#IC693PTM101 Power Transducer Module (Incl. Module, Interface, 1m Cable).................................. 0.435#IC693MDL760 Solenoid Valve Output (11 points) / 24VDC Output, 0.5A, Pos. Logic (5 points)........ 0.278*


SERIES 90-30 COPROCESSOR MODULESIC693PCM300 Series 90-30 Programmable Coprocessor Module (PCM), 160KB (35KB BASIC

Prgm.) with Y-Cable0.454

Note: Programmable Coprocessor Modules can ONLY be used with Series 90-30 CPU331 or higher. The following manuals are recommended for the 90-30 PCM Module: GFK-0255, GFK-0487

IC693PCM301 Series 90-30 Programmable Coprocessor Module (PCM), 192KB (47KB BASIC Prgm.) with Y-Cable

0.431


IC693PCM311 Series 90-30 Programmable Coprocessor Module (PCM), 640KB (190KB BASIC Prgm.) with Y-Cable

0.431


IC693PCM300-MP Series 90-30 Programmable Coprocessor Module (PCM), 160KB (35KB BASIC Prgm.) with Y-Cable (Modified for use by OEM's)

0.454

HE693ASC900 ASCII Basic Module 64K with RS232 and RS422/485 Ports...................................... 0.493HE693IBM235 Terminal Emulation Software on 3.5" diskette (included with ASCxxx)....................... 0.050HE693CBL222 RS232 cable for ASCII Basic Module to 9-pin PC....................................................... 0.128


Item Status



(kg)


SERIES 90-30 MOTION MODULESIC693APU301 Motion Mate APM300 (1 Axis) (Requires 1x or 2xCBL311 or ACC316-8).................. 0.317

Note: The following manuals are recommended for the APM300: GFK-0781, GFK-0840

IC693APU302 Motion Mate APM300 (2 Axis) (Requires 1x or 2xCBL311 or ACC316-8).................. 0.340Note: The following manuals are recommended for the APM300: GFK-0781, GFK-0840

IC693DSM302 Motion Mate DSM302 (2 Axis basic feature set)......................................................... 0.400Note: The Motion Mate DSM302 Motion Controller can control 1 or 2 axis. It uses a high density 37 pin connector and with ACC and CBL below provides a simple connection to extermal I/Os and the servo amplifier. The following manual is recommended for the DSM300: GFK-1464LogicMaster version 8.02 or above is required to configure the DSM302. A CPU with firmware version 6.5 or above is required in the host Series 90-30 PLC.

IC693DSM314 Motion Mate DSM314 (4 Axis advanced feature set).................................................. 0.400Note: The Motion Mate DSM314 Motion Controller can control 1 to 4 axis (max. 2 digital / max. 4 analog). It uses a high density 37 pin connector and with ACC and CBL below provides a simple connection to extermal I/Os and the servo amplifier. The following manual is recommended for the DSM314: GFK-1742 The DSM314 Requires CPU Release 10.0 Firmware or higher. CPU350, 352, 360, 363 and 364 support the release 10 upgrade. VersaPro version 1.1 is required for programming and configuration. The DSM314 is not compatible with LM90, Control or the DOS-based Motion Programmer (IC641SWP065)

HE693STP100 Stepper Positioning Module (1 Axis)........................................................................... 0.723HE693STP101 Stepper Positioning Module (1 Axis), Optical Isolation................................................ 0.737HE693STP110 Stepper Positioning Module, Incremental Encoder Feedback (1 Axis)....................... 0.680HE693STP111 Stepper Positioning Module, Incremental Encoder Feedback (1 Axis), Optical

Isolation0.737

HE693STP113 Stepper Positioning Module, Incremental Encoder Feedback (1 Axis), Optical Isolation w/ Indexed Moves

0.737


Isolation0.624

SERIES 90-30 SERIAL COMMUNICATION MODULESIC693CMM311 Series 90-30 Communication Coprocessor Module (CCM, SNP and RTU)................ 0.272

Note: Communication Module IC693CMM311 can ONLY be used with Series 90-30 CPU331 or higher. The following manual is recommended: GFK-0582

HE693SNP900 SNP Slave Module with RS232 and RS485 Ports....................................................... 0.439HE693RTM705 RTU/Modbus Master with RS232, RS485 Ports and Report by Exception................. 0.581HE693RTU900 RTU Slave Module with RS232 and RS485 Ports....................................................... 0.581HE693SNPCBL RS-232 to RS-422/485 Miniconverter with 9-pin PC Cable (2m)................................ 0.213HE693XTADP PC-XT & PS/2 (WM II) (25-pin) to 9-pin Adapter......................................................... 0.100IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141

Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable can also be used on the CPU351/352 as well as on the Ethernet interface. When using DSM314, this cable is only required for flash firmware upgrades.

HE485ISO232 Isolated RS232 to RS485 Repeater............................................................................ 0.695HE485ISO485 Isolated RS485 to RS485 Repeater............................................................................ 0.709



Item Status



(kg)


SERIES 90-30 GENIUS COMMUNICATION MODULESIC693BEM331 Series 90-30 Genius Bus Controller............................................................................ 0.317

Note: The following manual is recommended for the 90-30 Genius Bus Controller: GFK-1034

IC693CMM302 Series 90-30 Enhanced Genius Communications Module (GCM+) (Up to 4K Bytes of Global Data)

0.371

Note: The following manual is recommended: GFK-0695


SERIES 90-30 PROFIBUS COMMUNICATION MODULESIC693PBM200 Series 90-30 Profibus-DP Master Module................................................................... 0.317

Note: Requires CIMPLICITY ME Ver. 2.60 or higher. VersaPro and Logicmaster DO NOT support this module.

*

IC693PBS201 Series 90-30 Profibus-DP Slave Module..................................................................... 0.317Note: Requires CIMPLICITY ME Ver. 2.60 or higher. VersaPro and Logicmaster DO NOT support this module.

*

HE693PBM101 Series 90-30 Profibus-DP Master Module................................................................... 0.700Note: Can only be used with CPU350 or higher. Requires CIMPLICITY ME or VersaPro.

HE693PBS105 Series 90-30 Profibus-DP Slave Module..................................................................... 0.450Note: Can only be used with CPU350 or higher. Requires CIMPLICITY ME or VersaPro.

HE693PBS106 Series 90-30 Profibus-DP Slave Module..................................................................... 0.644Note: Can only be used with CPU350 or higher. Requires CIMPLICITY ME or VersaPro.


SERIES 90-30 ETHERNET COMMUNICATION MODULESIC693CMM321 Series 90-30 Ethernet Module..................................................................................... 0.274

Note: The following manual's are recommended: GFK-1084, GFK-1186

IC649AEA102 AAUI 10BaseT Transceiver......................................................................................... 0.700IC649AEA103 AAUI 10Base2 Coax Transceiver................................................................................ 0.550

Note: Replaces IC649AEA101


SERIES 90-30 I/O INTERFACE AND OTHER FIELDBUS MODULESIC693BEM320 Series 90-30 Fanuc I/O Link Interface (Slave)............................................................ 0.250

Note: The following manual is recommended for the 90-30 Slave I/O Link: GFK-0631

IC693BEM321 Series 90-30 Fanuc I/O Link Interface (Master).......................................................... 0.204Note: The following manual is recommended for the 90-30 Master I/O Link: GFK-0823

HE693DNT250 Series 90-30 DeviceNet Scanner Interface................................................................. 0.369HE693IBS100 Series 90-30 Interbus-S Slave Interface...................................................................... 0.439IC693CDC200 Series 90-30 CsCAN interface module. One CsCAN port and one programming

port for the network devices.0.570#

IC693PIF301 PC Interface Card for S90-30 I/O (includes IC641SWP056 Software)........................ 0.798Note: Replaces IC693PIF300

IC693PIF400 PC Interface Card for Series 90-30 I/O....................................................................... 0.250



Item Status



(kg)


SERIES 90-30 CABLESIC693CBL300 I/O Expansion Cable (1m)........................................................................................... 0.100

Note: Replaced by IC693CBL300-EU

IC693CBL301 I/O Expansion Cable (2m)........................................................................................... 0.250IC693CBL302 I/O Expansion Cable (15m)......................................................................................... 0.023IC693CBL303 Hand Held Programmer Cable, 2m (Spare)................................................................ 0.340IC693CBL304 Port Expansion Cable for use with PCM300 (Spare).................................................. 0.150IC693CBL305 Port Expansion Cable for use with PCM301, PCM311 and CMM311 (Spare)............ 0.150IC693CBL311 Cable (3m) with 25-pin 'D'-Type End, APM/MCS300.................................................. 0.454

Note: The above cable connects the I/O of the APM300 to a DIN Rail terminal block.

IC693CBL312-EU I/O Expansion Cable (0.18m), Shielded...................................................................... TBDNote: Replaces IC693CBL312

IC693CBL313 I/O Expansion Cable (8m)........................................................................................... 0.750IC693CBL314 I/O Expansion Cable (15m), Shielded......................................................................... 1.225IC693CBL315 Cable (3m) with Connector On One End (for MDL654/5 and MDL752/3)................... 0.420

Note: Replaces IC693CBL310

D0898

IC693CBL315-6M Cable (6m) with Connector On One End (for MDL654/5 and MDL752/3)................... 0.750IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141

Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable can also be used on the CPU351/352 as well as on the Ethernet interface. When using DSM314, this cable is only required for flash firmware upgrades.

IC693CBL321 Cable for Connection from Module Connector (ACC334) to Terminal Base (ACC329 through ACC333), 1m

TBD D0898

IC693CBL322 Cable for Connection from Module Connector (ACC334) to Terminal Base (ACC329 through ACC333), 2m

TBD D0898

IC693CBL323 Cable for Connection from Module Connector (ACC334) to Terminal Base (ACC329 through ACC333), 0.5m

TBD D0898

IC693CBL324 Terminal Board Connection Cable 1m........................................................................ 0.350Note: This cable is used to connect the ACC335 or the ACC336 to the DSM module. One per axis required


IC693CBL327 Cable-90Deg.-Left Side (3m) with Connector On One End (for MDL654/5 and MDL752/3)

0.100

IC693CBL328 Cable-90Deg.-Right Side (3m) with Connector On One End (for MDL654/5 and MDL752/3)

0.100

IC693CBL329 Cable-90Deg.-Right Side (1m) with two Connectors on both sides............................. TBDIC693CBL330 Cable-90Deg.-Left Side (1m) with two Connectors on both sides............................... TBDIC693CBL331 Cable-90Deg.-Right Side (2m) with two Connectors on both sides............................. 0.325IC693CBL332 Cable-90Deg.-Left Side (2m) with two Connectors on both sides............................... 0.335IC693CBL333 Cable-90Deg.-Right Side (0.5m) with two Connectors on both sides.......................... TBDIC693CBL334 Cable-90Deg.-Left Side (0.5m) with two Connectors on both sides............................ TBDIC690CBL701 PCM to Workmaster Cable (3m)................................................................................. 0.200IC690CBL702 PCM to PC-AT Cable (3m).......................................................................................... 0.200IC690CBL705 PCM to PC-XT and PS/2 Cable (3m).......................................................................... 0.250HE693CBL222 RS232 cable for ASCII Basic Module to 9-pin PC....................................................... 0.128HE693TRMCBL Cable for High Density Phoenix Terminal Block (used with IC693MDL654, 655,

752, 753)0.900

Note: Manual # GFK-0898 is recommended for Cables.


Item Status



(kg)


SERIES 90-30 ACCESSORIESIC693PRG300 Hand Held Programmer (HHP) with Cable.................................................................. 1.814IC690ACC900 RS-232 to RS-422/485 Converter............................................................................... 0.113IC690ACC901 RS-232 to RS-422/485 Miniconverter with programming cable (Consists of

HE693SNPCBL and HE693XTADP)0.100

IC693ACC300 Input Simulator Module (16 Points)............................................................................. 0.181IC693ACC301 Replacement Battery for CPU or PCM (qty. 2)............................................................ 0.023IC693ACC302 High Capacity Battery Pack......................................................................................... 0.023

Note: The new Auxiliary Battery Pack (IC693ACC302) will enable Series 90-30 and Series 90-70 CPU’s (except CPU374) to go up to 75 months (shelf life of 10 years) of RAM memory backup with no power. The CPU374 backup is 15 months.

*

IC693ACC303 Memory Card for use with HHP, 32 KBytes................................................................. 0.023IC693ACC305 EEPROM Chips (qty. 4)............................................................................................... 0.023IC693ACC306 EPROM Chips (qty. 4)................................................................................................. 0.045IC693ACC307 I/O Bus Terminator Plug (Spare)................................................................................. 0.045IC693ACC308 Rack Adaptor Bracket, 10 Slot to 19' Rack................................................................. 0.113IC693ACC309 Rack Adaptor Bracket, Series One 5/10 Slot Rack..................................................... 0.068IC693ACC310 Filler Module................................................................................................................ 0.102IC693ACC311 Terminal Blocks (qty. 6) (Spare).................................................................................. 0.586IC693ACC315 Battery Kit (for CPU311, 313, 321, 323)...................................................................... 0.068IC693ACC316 Connector, Qty 10, Solder Eyelet Type (for MDL654/5, MDL752/3 and APM)........... 0.250

Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate (10) single-ended cables. Additional tools will be required for crimp and ribbon kits.

IC693ACC317 Connector, Qty 10, Crimp Type (for MDL654/5, MDL752/3 and APM)....................... 0.295Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate (10) single-ended cables. Additional tools will be required for crimp and ribbon kits.

IC693ACC318 Connector, Qty 10, Ribbon Type (for MDL654/5, MDL752/3 and APM)..................... 0.181Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate (10) single-ended cables. Additional tools will be required for crimp and ribbon kits.

IC693ACC319 Spare Parts Kit (for CPU, I/O and PCM)..................................................................... 0.998IC693ACC320 Spare Parts Kit (for Power Supply).............................................................................. 0.023IC693ACC324 Retainer Bracket for 5 Slot Base................................................................................. 0.091IC693ACC325 Retainer Bracket for 10 Slot Base............................................................................... 0.181IC693ACC329 TBQC Base for IC693MDL645, MDL646 and MDL240............................................... 0.101IC693ACC330 TBQC Base for IC693MDL740 and MDL742.............................................................. 0.101IC693ACC331 TBQC Base for IC693MDL741.................................................................................... 0.101IC693ACC332 TBQC Base for IC693MDL940.................................................................................... 0.101IC693ACC333 TBQC Base for IC693MDL340.................................................................................... 0.101IC693ACC337 TBQC Base for IC693MDL654, MDL655, MDL752 and MDL753............................... 0.101IC693ACC334 Module Connector for use with all 90-30 Terminal Bases........................................... 0.041IC693ACC335 Axis Terminal Board.................................................................................................... 0.120

Note: This terminal board (DIN Rail compatible) allows convenient connection of I/Os (over-travel, home, strobe, analogue out, CTL10/12 outputs) and the servo amplifier through IC800CBL001/002. One per axis required.

IC693ACC336 Auxiliary Terminal Board............................................................................................. 0.120Note: This terminal board (DIN-Rail compatible) allows convenient connection of auxiliary I/Os (follower master encoder on connector C, and future I/O expansion). This terminal board is also used when connecting analogue axis to the DSM302/314. One per axis required.

IC697ACC736 Cable Shield Clamping Assembly............................................................................... 1.293IC697ACC737 Additional Cable Clamp Set......................................................................................... 0.295IC693MLX000 Series 90-30 Label Kit................................................................................................. 0.272HE693TRM526 Terminal Strip w/ Ribbon Cable for High Density S90-30 Modules (used with

IC693MDL654, 655, 752, 753)TBD


Item Status



(kg)


HE693ISOBLK DIN rail mountable Cold Junction Compensation Block (works w/ THM665, THM668, THM884 and THM888)

0.553

HE693CALKIT Calibration Kit for all HE Analog Modules (Only required for recalibration)................. 0.397

SERIES 90-30 UPGRADE KITS44Axxxxxx-Gxx Series 90-30/20 Firmware Upgrade Kit (Per Kit)......................................................... TBD


Item Status



(kg)


SERIES 90-30 PRODUCTS WITH LOW TEMPERATURE TESTINGIC693ACC300-LT Input Simulator Module (16 Points) - Low Temperature.............................................. 0.181IC693ALG220-LT Analogue Input, -10 to +10V 12 Bit, 4 to 20mA 10 Bit (4 Channels) - Low

Temperature0.363

IC693ALG221-LT Analogue Input, 4 to 20mA 12 Bit (4 Channels) - Low Temperature........................... 0.357IC693ALG222-LT Analogue Input Voltage (16 Single Channels or 8 Differential Channels) - Low

Temperature0.340

IC693ALG223-LT Analogue Input Current (16 Single Channels) - Low Temperature............................. 0.345IC693ALG390-LT Analogue Output, -10 to +10V, 12 Bit (2 Channels) - Low Temperature..................... 0.342IC693ALG391-LT Analogue Output, 4 to 20mA 12 Bit (2 Channels) - Low Temperature........................ 0.340IC693ALG392-LT Analogue Output, Voltage/Current, 16Bit (8 Channels) - Low Temperature............... 0.100IC693ALG442-LT Analogue Combo Module, -10 to +10V, 0-20mA, 4 Ch. In (12Bit) / 2 Ch. Out

(16Bit) - Low Temperature0.200

IC693APU300-LT High Speed Counter, 80 KHz - Low Temperature....................................................... 0.346IC693BEM331-LT Series 90-30 Genius Bus Controller - Low Temperature............................................. 0.317IC693CHS391-LT 10 Slot Base - Low Temperature................................................................................. 0.948IC693CHS392-LT 10 Slot Expansion Base with I/O Bus Terminator - Low Temperature........................ 0.930IC693CHS393-LT 10 Slot Remote Expansion Base with I/O Bus Terminator (Up to 213m) - Low

Temperature0.943

IC693CHS397-LT 5 Slot Base - Low Temperature................................................................................... 0.590IC693CHS398-LT 5 Slot Expansion Base with I/O Bus Terminator - Low Temperature.......................... 0.620IC693CHS399-LT 5 Slot Remote Expansion Base with I/O Bus Terminator (Up to 213m) - Low

Temperature0.557

IC693CMM302-LT Series 90-30 Enhanced Genius Communications Module (GCM+) (Up to 4K Bytes of Global Data) - Low Temperature

0.371

IC693CMM311-LT Series 90-30 Communication Coprocessor Module (CCM, SNP and RTU) - Low Temperature

0.272

IC693CPU311-LT Base 5 Slot with integrated CPU Model 311 (6K Bytes User Program) - Low Temperature

0.553

IC693CPU313-LT Base 5 Slot with integrated CPU Model 313 (12K Bytes User Program, 0.6 ms/K Boolean Execution) - Low Temperature

0.556

IC693CPU323-LT Base 10 Slot with integrated CPU Model 313 (12K Bytes User Program, 0.6 ms/K Boolean Execution) - Low Temperature

0.953

IC693CPU331-LT CPU Model 331 Module (16K Bytes User Program, 0.4 ms/K Boolean Execution) - Low Temperature

0.271

IC693CPU350-LT CPU Model 350 Module (32K Bytes User Program, 0.22 ms/K Boolean Execution) - Low Temperature

0.284

IC693CPU352-LT CPU Model 352 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution) with HW Floating Point Math. Processor. Two built in Serieal Ports - Low Temperature

0.386

IC693CPU360-LT CPU Model 360 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution) - Low Temperature

0.200

IC693CPU363-LT CPU Model 363 Module (240K Bytes configurable User Memory, 0.22 ms/K Boolean Execution) w/ two Build In Serial Ports - Low Temperature

0.417

IC693MAR590-LT 120 Vac Input (8 points), Relay Output (8 points) - Low Temperature........................ 0.295IC693MDL230-LT 120 Vac Isolated Input (8 points) - Low Temperature................................................. 0.317IC693MDL231-LT 240 Vac Isolated Input (8 points) - Low Temperature................................................. 0.295IC693MDL240-LT 120 Vac Input (16 points) - Low Temperature............................................................. 0.317IC693MDL241-LT 24 Vac/dc Input (16 points) - Low Temperature.......................................................... 0.272IC693MDL330-LT 120/240 Vac Output, 1 A (8 points) - Low Temperature.............................................. 0.359IC693MDL340-LT 120 Vac Output, 0.5 A (16 points) - Low Temperature................................................ 0.408IC693MDL390-LT 120/240 Vac, Isolated Output, 2 A (5 points) - Low Temperature............................... 0.340IC693MDL632-LT 125 Vdc Input, Pos./Neg. Logic (8 points) - Low Temperature.................................... 0.522IC693MDL634-LT 24 Vdc Input, Pos./Neg. Logic (8 points) - Low Temperature...................................... 0.272IC693MDL645-LT 24 Vdc Input, Pos./Neg. Logic (16 points), 7ms - Low Temperature........................... 0.269IC693MDL646-LT 24 Vdc Input, Pos./Neg. Logic (16 points), 1ms - Low Temperature........................... 0.272IC693MDL654-LT 5-12 Vdc Input, Pos./Neg. Logic (32 points), - Low Temperature............................... 0.273IC693MDL655-LT 24 Vdc Input, Pos./Neg. Logic (32 points), - Low Temperature................................... 0.023


Item Status



(kg)


IC693MDL730-LT 12/24 Vdc Output, 2 A, Pos. Logic (8 points) - Low Temperature............................... 0.352IC693MDL731-LT 12/24 Vdc Output, 2 A, Neg. Logic (8 points) - Low Temperature............................... 0.340IC693MDL734-LT 125 Vdc Output (6 Points) - Low Temperature............................................................ 0.272IC693MDL740-LT 12/24 Vdc Output, 0.5 A, Pos. Logic (16 points) - Low Temperature.......................... 0.278IC693MDL741-LT 12/24 Vdc Output, 0.5 A, Neg. Logic (16 points) - Low Temperature.......................... 0.292IC693MDL742-LT 12/24 Vdc Output, 1 A, Pos. Logic, with Overload Protection (16 points) - Low

Temperature0.295

IC693MDL752-LT 5-24 Vdc (TTL) Output, 0.3 A, Neg. Logic (32 points) - Low Temperature.................. 0.279IC693MDL753-LT 24 Vdc Output, Pos. Logic (32 points) - Low Temperature......................................... 0.272IC693MDL930-LT Relay Output, 4A Isolated, (8 points) - Low Temperature........................................... 0.323IC693MDL931-LT Relay Output, 8A Isolated, N.C. & Form C (8 points) - Low Temperature................... 0.341IC693MDL940-LT Relay Output, 2A (16 points) - Low Temperature........................................................ 0.363IC693MDR390-LT 24 Vdc Input (8 points), Relay Output (8 points) - Low Temperature.......................... 0.295IC693PCM300-LT Series 90-30 Programmable Coprocessor Module (PCM), 160KB (35KB BASIC

Prgm.) with Y-Cable - Low Temperature0.454

IC693PCM301-LT Series 90-30 Programmable Coprocessor Module (PCM), 192KB (47KB BASIC Prgm.) with Y-Cable - Low Temperature

0.431

IC693PCM311-LT Series 90-30 Programmable Coprocessor Module (PCM), 640KB (190KB BASIC Prgm.) with Y-Cable - Low Temperature

0.431

IC693PWR321-LT Power Supply 100-240 Vac, 30W - Low Temperature................................................ 0.948IC693PWR322-LT Power Supply 24/48 Vdc, 30W - Low Temperature..................................................... 0.400IC693PWR328-LT Power Supply 48 Vdc, 30W - Low Temperature......................................................... 0.544

Note: Only modules shown below are available for ordering as low temperature tested. The design temperature range of Series 90-30 programmable controller products is 0 ºC to 60 ºC (+32 ºF to +140 ºF). All the Series 90-30 products are tested to verify functional operation over the design temperature range. Prior to shipment from the factory, the LT suffix products undergo and additional temperature test to verify functional operation over a wider temperature range -40 ºC to +60 ºC (-40 ºF to +140 ºF). The non analog LY suffix products will be tested to verify functional operation over a temperature range of -40 ºC to +60 ºC (-40 ºF to +140 ºF). The analog LT modules are to have passed this screen if the accuracy of the inputs is ±1% over the temperature range -40 ºC to +60 ºC (-40 ºF to +140 ºF). Use of these products outside of the desing temperature range 0 ºC to 60 ºC (+32 ºF to +140 ºF) must be limited to non critical operation.

PROGRAMMING SOFTWARE FOR SERIES 90-30GE Fanuc PLC’s are programmed with CIMPLICITY Machine Edition (ME), which is a suite of machine level software components to develop Control, HMI and Motion applications within a single unified working environment. CIMPLICITY ME development software runs on Windows 98, NT4.0 or 2000.


Hardware support:-Logic Developer PLC Standard Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90-30 and Series 90 Micro PLC’s.



Item Status



(kg)


PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGESIC646MPS001 Logic Developer - PLC Standard Edition - single license, software only..................... 0.500

Note: Includes GE Fanuc's InfoLink CD with electronic documentation for VersaMax and Series 90 PLCs.

*

IC646MPS101 Logic Developer - PLC Standard Edition, single license, with Programming Cable and RS485 Mini-Converter

0.500


*


PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGESIC646MPS005 Logic Developer - PLC Standard Edition - 5 Pack....................................................... 0.500*IC646MPS010 Logic Developer - PLC Standard Edition - 10 Pack..................................................... 0.500*IC646MPS025 Logic Developer - PLC Standard Edition - 25 Pack..................................................... 0.500*IC646MPS050 Logic Developer - PLC Standard Edition - 50 Pack..................................................... 0.500*IC646MPSS50 Logic Developer - PLC Standard Edition - 50 Seat Site License................................. 0.500*IC646MPSS99 Logic Developer - PLC Standard Edition - Unlimited Seat Site License...................... 0.500


*



PROGRAMMING SOFTWARE UPGRADESIC646MPSU01 Logic Developer - PLC Standard Edition, single license, Upgrade from Logicmaster

90-30 or Control. (Serial number required with valid subscription service).0.500


*


0.500


*

PROGRAMMING SOFTWARE UPGRADE SERVICE & TECHNICAL SUPPORT (SAFE)SA648MPS001 SAFE for Logic Developer -PLC Standard single license............................................ 0.500*SA648MPS005 SAFE for Logic Developer -PLC Standard 5 Pack...................................................... 0.500*SA648MPS010 SAFE for Logic Developer -PLC Standard 10 Pack.................................................... 0.500*SA648MPS025 SAFE for Logic Developer -PLC Standard 25 Pack.................................................... 0.500*SA648MPS050 SAFE for Logic Developer -PLC Standard 50 Pack.................................................... 0.500*SA648MPSS50 SAFE for Logic Developer -PLC Standard 50 Seat Site License................................ 0.500*SA648MPSS99 SAFE for Logic Developer -PLC Standard Unlimited Seat Site License..................... 0.500*



Item Status



(kg)


PROGRAMMING SOFTWARE STATE LOGICState Logic is a natural language programming environment that uses state-transition diagrams to build programs. It can be a powerful alternative to traditional control programming and because of State’s architecture and Natural Language technologies, programs are easier to debug, troubleshoot, and maintain which can significantly reduce development & debugging time.

Logic Developer State -Standard Edition provides configuration and programming of GE Fanuc Series 90™-30 CPU351 and greater PLC's. Release 9.1 is the minimum release level supported. Please refer to the CIMPLICITY Machine Edition section for ordering information.

PROGRAMMING SOFTWARE LEGACY PRODUCTSGE Fanuc recommends using CIMPLICITY ME to program GE Fanuc PLC’s. Previous programming software packages such as VersaPro, Control or Logicmaster are available and are continuously enhanced with features and product support. Please refer to the software section to the end of the price list for ordering information.

SERIES 90-30 C TOOLKITSIC641SWP709 C Programmer's Toolkit for Series 90 PLCs, Standard............................................... 0.655

Note: This product is a software product which is licensed to the user for use on a single PC at a time. It can be used to create C function blocks which can be executed in any compatible Series 90-30 or Series 90-70 PLC. Once a C block is created it can be placed in a VersaPro / Control for Series 90-30 or Logicmaster / Control for Series 90-70 Library and handled like any other program element.

· Series 90 C Development Software on 3 1/2" and 5 1/4" media· User's Manual - GFK-0646 · Technical Support.· Requires signed Toolkit License (GFJ-318) before purchase

M0802

IC641SWP710 C Programmer's Toolkit for Series 90 PCMs............................................................... 1.370Note: This product is a software product which is licensed to the user for use on a single PC at the time. It can be used to create C programs which can be executed in any compatible Series 90-30 and Series 90-70 PCM. Telephone support for several user individuals named in the license agreement is included. All .EXE files created with the product conatin registration information which can be read with the Originator Identification Utility. Includes: Series 90 PCM C Development software on 3 1/2" and 5 1/4" media. User's manual - GFK0771. PCM C Function Library Reference - GFK0772. Data Sheet - GFK-0714. Technical Support. Requires signed Toolkit license (GFJ-318) before purchase.

M0802

Note: Release 5.00 of the C Programmer’s Toolkit for Series 90-70 and Series 90-30 controller supports the creation of Series 90-70 PLC CPU C blocks and standalone C programs using the Microsoft® C Compiler versions 6.0 or 7.0 or Microsoft Visual C/C++ versions 1.0 or 1.5. The Toolkit also supports 90-30 C subroutines and Cmain programs using Version 8.00C of the Microsoft C Compiler. Release 8.00C of the Microsoft C Compiler is included with the toolkit and can be used instead of purchasing the compiler separately. Series 90-30 support is present in both PLC C Toolkits listed above; however, the 90-30 PLC does not support the use of the C debugger; therefore, 90-30 functionality is the same in both versions (IC641SWP709/719).


Item Status



(kg)


SERIES 90-30 HOST COMMUNICATION TOOLKITSIC641SWP058 Host Communication Toolkit for Windows 95/NT C/C++ Applications........................ 0.018

Note: The Host Communication Toolkit provides a means to communicate to Series 90-30 or Series 90-70 controller through its Ethernet Interfaces (IC693CMM321, IC697CMM741/ 742). The toolkit can be used to develop applications which run on a PC running Windows 95 or Windows NT. The Host Communications software also supports applications development on a PC running Microsoft Windows for Workgroups, an HP-UX 9000 workstation, a DEC VAX/VMS™ workstation, or a DEC Alpha AXP/VMS™ workstation. The host-to-PLC communications uses TCP/IP (Transmission Control Protocol and Internet Protocol) across an Ethernet Local Area Network (LAN) or SNP protocol over a serial line.

Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058) is a runtime toolkit which allows Microsoft Windows NT user-written C or C++ applications to access data from Series 90-70/90-30/90-20 and Micro Controllers. This toolkit requires Microsoft 32 bit compiler. This catalog number requires and includes one copy of the Host Drivers for Windows 95/NT (IC641SWP080). Signed Toolkit License (GFJ-318) required prior to purchase.

Includes: IC641SWP080 Host Drivers for Windows 95/NTGFK-0870 Host Communications Toolkit C/C++ User's ManualTechnical SupportObject file on distribution media (one 3.5 inch high-density diskette).

D0802

IC641SWP080 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 1......................................... 0.018Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP communications software and the Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-0317) for a single machine. The IC641SWP081 product is provided as a convenience to users requiring use of the Host software on multiple platforms.

M0802

IC641SWP081 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 10....................................... 3.800Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP communications software and the Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-0317) for a single machine. The IC641SWP081 product is provided as a convenience to users requiring use of the Host software on multiple platforms.

M0802

SERIES 90-30 OTHER SOFTWAREIC641SWP040 SNP Object Code DOS Driver, Single User License................................................... 0.405 D0802IC641SWP041 SNP C Source code DOS driver, Multi User License.................................................. 0.032

Note: For IC641SWP041 a license agreement has to be signed before ordering the product (GFJ-313). Use Order form GFJ-065A-EU.

D0802

IC641SWP042 SNP Object code DOS driver, Multi User License....................................................... 0.032 M0802IC641SWP061 PCM Development Software....................................................................................... 2.145 M0802IC641SWP063 PCM Support Software................................................................................................ 0.398 M0802IC641SWP065 Motion Mate APM/DSM/MCS 300 Motion Programmer Software............................... 0.470HE693CALKIT Calibration Kit for all HE Analog Modules (Only required for recalibration)................. 0.397HE693IBM235 Terminal Emulation Software on 3.5" diskette (included with ASCxxx)....................... 0.050


Item Status



(kg)


CRITICAL CONTROLIC641HBR300 Max-ON Lite................................................................................................................ 0.779

Note: >351 or 36X CPUs, supports 256DI, 64DQ, 32AI, 12AQ, 300 Sync Registers, 1 simplex I/O LAN, uses Genius Sync Data. The Max-ON tools requires VersaPro version 1.5 and is designed to operate with either Windows® 95, 98 or NT

*

IC641HBR301 Max-ON Standard........................................................................................................ 0.779Note: >351 or 36X CPUs, supports 512DI, 512DQ, 512AI, 64AQ, 8000 Sync Registers, 2 simplex I/O LANs or 1 dual, uses Genius Sync Data. The Max-ON tools requires VersaPro version 1.5 and is designed to operate with either Windows® 95, 98 or NT

*

IC641HBR302 Max-ON Extended....................................................................................................... 0.779Note: 364 CPU Only, supports 2048DI, 2048DQ, 1024AI, 200AQ, 8000 Sync Registers, 8 simplex I/O LANs, or 4 dual, uses Ethernet Sync Data. The Max-ON tools requires VersaPro version 1.5 and is designed to operate with either Windows® 95, 98 or NT

*

SERIES 90-30 DOCUMENTATIONGFK-xxxx VersaMax/Series 90-30/20/Micro Manuals (per manual)............................................IC693LBR301 Series 90-30 Paper Manuals Library........................................................................... 14.492IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095





Item Status



(kg)


SERIES 90-70 CENTRAL PROCESSOR UNITS (CPU)IC697CPU731 CPU 731 186 8 MHz, 512 I/0, 32K Fixed Memory...................................................... 0.544IC697CPX772 CPX 772, 486DX4, 96 MHz, 32-Bit, Floating Point, 512K byte fixed user memory,

2K discrete I/O, 8K analog I/O1.375

IC697CPX782 CPX 782, 486DX4, 96 MHz, 32-Bit, Floating Point 1024K byte fixed user memory, 12K discrete I/O, 8K analog I/O

1.200

IC697CPX928 CPX 928, 486DX4, 96 MHz, 32-Bit, Floating Point 6M byte fixed user memory, 12K discrete I/O, 8K analog I/O

0.726

IC697CPX935 CPX 935, 486DX4, 96 MHz, 32-Bit, Floating Point, 1024 K byte fixed user memory (fast), 12K discrete I/O, 8K analog I/O

0.567

Note: Data Sheet included with each CPU.

The following manuals are recommended for the Series 90-70 controller system: GFK-0262 Series 90-70 Programmable Controller Installation ManualGFK-0600 Series 90-70 Programmable Controller Data Sheet ManualGFK-1192 Series 90-70 System Manual

SERIES 90-70 MEMORY DAUGHTERBOARDS (CPU & PCM)IC697MEM713 Expansion RAM 64 KBytes (for CPU77x and PCM)................................................... 0.136IC697MEM715 Expansion RAM 128 KBytes (for CPU77x and PCM)................................................. 0.136IC697MEM717 Expansion RAM 256 KBytes (for CPU77x and PCM)................................................. 0.136IC697MEM719 Expansion RAM 512 KBytes (for CPU77x and PCM)................................................. 0.136IC697MEM735 Expansion RAM 512 KBytes (for CPU788 and CPU789)............................................ 0.250

Note: Data Sheet included with module

SERIES 90-70 STATE LOGIC PRODUCTSIC697CSE925 State Logic CPU, 64 MHz............................................................................................ TBD

Note: Package includes downloadable State Engine software (C Program Blocks). See below for ECLiPS Programming software. The following manuals are recommended for the State Engine CPUs listed above: GFK-0727 and GFK-1006. Rated to 40 Deg C without fans. Requires rack mounted fan assembly IC697ACC721 or IC697ACC724 for operation above this temperature.

IC697CMM712 State Logic Serial Communication Processor............................................................. 0.526# M1102AD641ECL708 Eclips Programming Software for Series 90-70........................................................... 1.899

Note: The following manual is recommened: GFK-0731.

SERIES 90-70 RACKSIC697CHS750 5 Slot Rack, Rear Mount............................................................................................. 4.150IC697CHS782 Integrator's Rack, 17 VME Slots, Rear Mount............................................................. 5.398IC697CHS783 Integrator's Rack, 17 VME slots, Front Mount (19").................................................... 5.466IC697CHS790 9 Slot Rack, Rear Mount............................................................................................. 5.262IC697CHS791 9 Slot Rack, Front Mount (19").................................................................................... 5.262



Item Status



(kg)


SERIES 90-70 POWER SUPPLIESIC697PWR710 Power Supply 120/240 Vac +125 Vdc, 55 Watts (5 Vdc)............................................ 0.998

Note: Replaces IC697PWR731/732 in Rev. D and later versions

IC697PWR711 Power Supply 120/240 Vac +125 Vdc, 100 Watts (5Vdc, +/-12 Vdc).......................... 1.588Note: Replaces IC697PWR731/732 in Rev. D and later versions

IC697PWR724 Power Supply 24 Vdc, 90W......................................................................................... 1.780Note: Replaces IC697PWR721/722 Power Supply

IC697PWR748 Power Supply 48 Vdc, 90W......................................................................................... 1.456IC697CBL700 Cable Kit, Power Supply Extension (Used For 2 Rack P/S Function)......................... 0.476


SERIES 90-70 I/O INTERFACE MODULESIC697BEM711 Bus Receiver Module with I/O Bus Terminator (Required For Each Local

Expansion Rack)0.476

IC697BEM713 Bus Transmitter Module including Parallel Programming Port.................................... 0.454IC697BEM721 Series 90-70 Fanuc I/O Link Interface (Master/Slave)................................................ 0.817

Note: The following manual is recommended for the FANUC I/O Link: GFK-0644

IC697BEM731 Series 90-70 Genius Bus Controller............................................................................ 0.494Note: The following manuals are recommended for the 90-70 Bus Controller: GFK-0398, GEK-90486-1, GEK-90486-2

IC697BEM733 Series 90-70 Genius Remote I/O Scanner.................................................................. 0.544Note: The following manual is recommended for the Remote I/O Scanner: GFK-0579

Note: Data Sheet included with module.

SERIES 90-70 CABLESIC600WD002 I/O Cable (0.6m).......................................................................................................... 0.256 M0595IC600WD005 I/O Cable (1.5m).......................................................................................................... 0.460 M0595IC600WD010 I/O Cable (3m)............................................................................................................. 0.801 M0595IC600WD025 I/O Cable (7.5m).......................................................................................................... 1.844 M0595IC600WD050 I/O Cable (15m)........................................................................................................... 3.631 M0595IC647CBL703 Series 90-70 to Workstation Interface (WSI) Cable, Parallel (3m) (spare).................. 0.776IC647CBL704 Series 90-70 to Workstation Interface (WSI) Cable, Serial (3m) (spare)..................... 0.500IC647CBL753 Series 90-70 to Workstation Interface (WSI) Cable, Parallel (15m)............................ 4.000IC690CBL701 PCM to Workmaster Cable (3m)................................................................................. 0.200IC690CBL702 PCM to PC-AT Cable (3m).......................................................................................... 0.200IC690CBL705 PCM to PC-XT and PS/2 Cable (3m).......................................................................... 0.250IC697CBL700 Cable Kit, Power Supply Extension (Used For 2 Rack P/S Function)......................... 0.476IC697CBL709 Cable MAP Controller to Broadband Modem.............................................................. TBDIC697CBL811 Cable, RCM Communications (3m)............................................................................. 0.770IC697CBL826 Cable, RCM Communications (6m)............................................................................. 2.500

Note: Cables IC600WDXXX are used as local I/O expansion cables for Series 90-70.


Item Status



(kg)


SERIES 90-70 DISCRETE INPUT MODULESIC697MDL240 120 Vac Isolated Input (16 points)............................................................................... 0.658IC697MDL241 240 Vac Isolated Input (16 points)............................................................................... 0.680IC697MDL250 120 Vac Input (32 points)............................................................................................ 0.680IC697MDL251 120 Vac Input (16 points)............................................................................................ 0.658IC697MDL252 12 Vac Input (32 points).............................................................................................. 0.635IC697MDL253 24 Vac Input (32 points).............................................................................................. 0.635IC697MDL254 48 Vac Input (32 points).............................................................................................. 0.635IC697MDL640 125 Vdc Input (16 points)............................................................................................ 0.612IC697MDL651 5 Vdc TTL Input (32 Points)........................................................................................ 0.635IC697MDL652 12 Vdc Input, Pos./Neg. Logic (32 points)................................................................... 0.658IC697MDL653 24 Vdc Input, Pos./Neg. Logic (32 points)................................................................... 0.616IC697MDL654 48 Vdc Input, Pos./Neg. Logic (32 points)................................................................... 0.635IC697MDL671 24 Vdc Interrupt Input Module (14 Points)................................................................... 0.680


SERIES 90-70 DISCRETE OUTPUT MODULESIC697MDL340 120 Vac Output, 2A (16 points)................................................................................... 0.930IC697MDL341 120/240 Vac Isolated Output, 2A (12 points)............................................................... 0.907IC697MDL350 120 Vac Output, 0.5A (32 points)................................................................................ 0.709IC697MDL740 24/48 Vdc Output, 2A, Pos. Logic (16 points)............................................................. 0.872IC697MDL750 24/48 Vdc Output, 0.5A, Pos. Logic (32 points).......................................................... 0.680IC697MDL752 12 Vdc Output, 0.5A, Pos. Logic (32 points)............................................................... 0.680IC697MDL753 5-48 Vdc Output, 0.5A, Neg. Logic (32 points)............................................................ 0.680IC697MDL940 Relay Output, 2A (16 points)....................................................................................... 0.653


SERIES 90-70 ANALOG INPUT MODULESIC697ALG230 Analogue Input, Voltage/Current (8 Channels)............................................................ 0.661IC697ALG440 Analogue Input Expander, Current (16 Channels)...................................................... 0.070IC697ALG441 Analogue Input Expander, Voltage (16 Channels)...................................................... 0.703


SERIES 90-70 ANALOG OUTPUT MODULESIC697ALG320 Analogue Output, Voltage/Current (4 Channels)......................................................... 0.669


SERIES 90-70 SPECIAL FUNCTION MODULESIC697PCM711 Series 90-70 Programmable Coprocessor Module (PCM), (Requires Memory

MEM71x)0.544

Note: PCM memory expansion is recommended for MegaBasic applications. Memory modules/program size is as follows: MEM713/47 KB, MEM715/61 KB, MEM717/104 KB, and MEM719/190 KB. The following manuals are recommended for the 90-70 PCM: GFK-0255, GFK-0487

IC697PCM711-MP Programmable Coprocessor Module (For OEM Use Only), (Requires Memory MEM71x)

0.544


IC697HSC700 High Speed Counter.................................................................................................... 0.680



Item Status



(kg)


SERIES 90-70 COMMUNICATION MODULESIC697BEM731 Series 90-70 Genius Bus Controller............................................................................ 0.494

Note: The following manuals are recommended for the 90-70 Bus Controller: GFK-0398, GEK-90486-1, GEK-90486-2

IC697CMM711 Series 90-70 Serial Communication Coprocessor Module (CCM, SNP, SNPx and RTU)

0.499

Note: The following manual is recommended for the 90-70 CMM711 Module: GFK-0582

IC697CMM712 State Logic Serial Communication Processor............................................................. 0.526# M1102IC697CMM742 Series 90-70 Ethernet Controller................................................................................ 0.544

Note: TCP/IP only. SRTP is preloaded into the controller (IC651ENS042). Does not requires GSM. Release 6.0 CPU required. LM 90-70 release 6.x required to configure.

IC697CMM741 Series 90-70 MMS or TCP/IP Ethernet LAN Interface................................................ 0.544Note: IC651ENS040 software required for MMS operation. IC651ENS042 software required for TCP/IP operation. The IC651ENS042 is not included in the IC697CMM741 package but is included with Logicmaster 90-70 Ethernet TCP/IP packages (IC641SWP/SWC713 and SWP/SWC716). Only one copy of IC651ENS040 or IC651ENS042 is required per network.

# M1102

IC697PCM711 Series 90-70 Programmable Coprocessor Module (PCM), (Requires Memory MEM71x)

0.544



SERIES 90-70 ACCESSORIESIC697ACC744 Rack Cooling Fan Assembly 24 VDC, 19'................................................................... 3.779IC690ACC901 RS-232 to RS-422/485 Miniconverter with programming cable (Consists of


IC697ACC700 Terminal Block for 90-70 I/O (qty. 6, Spare)................................................................ 1.588IC697ACC701 Replacement Battery for 90-70 CPU, PCM or MCS700 (Qty. 2)................................ 0.023IC697ACC702 I/O Bus Terminator Plug (Spare)................................................................................. 0.045IC697ACC715 VME Integrator Kit / J2 Backplane Mounting............................................................... 0.885IC697ACC720 Blank Slot Filler (Qty 6)................................................................................................ 1.792IC697ACC721 Rack Cooling Fan Assembly 115 VAC, 19'................................................................. 3.220IC697ACC722 VME Blank Slot Interrupt Jumper (Qty.6).................................................................... 0.181IC697ACC723 Clear Plastic Doors (Qty. 6)......................................................................................... 0.250IC697ACC724 Rack Cooling Fan Assembly 230 VAC, 19'................................................................. 3.175IC697ACC725 Black Painted Door for CPU Style Modules (Qty. 6)................................................... 0.250IC697ACC726 Top Protective Cover for CPU Style Modules (Qty. 6)................................................ 1.111IC697ACC727 Top and Bottom Protective Cover for Genius Bus Controller (Qty. 6)......................... 0.454IC697ACC728 Top and Bottom Protective Cover for Bus Transmitter and Receiver (Qty. 2)............. 0.431IC697ACC729 Top and Bottom Protective Cover for Fanuc I/O Link Module..................................... 0.431IC697ACC730 Spare Slot Terminal Strip Retainer (Qty. 6)................................................................. 0.363IC697ACC731 Power Supply Painted Doors with Blank Frame (Qty. 6)............................................. 1.111IC697ACC732 Top Protective Cover for CPU 77x and 78x................................................................ 0.295IC697ACC735 VME Single Slot Filler (Qty 6)...................................................................................... 0.386IC697ACC736 Cable Shield Clamping Assembly............................................................................... 1.293IC697ACC737 Additional Cable Clamp Set......................................................................................... 0.295IC697ACC744 Rack Cooling Fan Assembly 24 VDC, 19'................................................................... 3.779


Item Status



(kg)


CRITICAL CONTROLIC697CPM790 GMR - 90-70 CPU (486).............................................................................................. 0.885

Note: Requires GMR Configuration Software, IC641SWP715

IC697CGR772 Hot Standby Genius Dual Bus CPU, 96 MHz, 486DX4, 32-Bit, Floating Point, 512K byte fixed user memory, 2K discrete I/O, 8K analog I/O

1.350

IC697CGR935 Hot Standby Genius Dual Bus CPU, 96 MHz, 486DX4, 32-Bit, Floating Point, 1024K byte fixed user memory (fast), 12K discrete I/O, 8K Analog I/O

1.050

IC697CPU788 CPU 788, 100 Triplex Voted I/O, GMR Version (Requires Memory MEM735)........... 0.680Note: CPU788 and CPU789 must have a 512K memory daughterboard to operate. Requires GMR Configuration Software IC641SWP714 for phase 2 or IC641SWP715 for phase 3 (see software below).

IC697MSC800 GMR Redundancy System 100 TMR I/O (Rack, PS, CPU, RAM, 3-GBC)................. TBDNote: MSC800, MSC801 and MSC802 require GMR Configuration software IC641SWP714 for phase 2 or IC641SWP715 for phase 3. See Software category.

IC697MSC801 GMR Redundancy System 2 K TMR I/O (Rack, PS, CPU, RAM, 3-GBC).................. TBDNote: MSC800, MSC801 and MSC802 require GMR Configuration software IC641SWP714 for phase 2 or IC641SWP715 for phase 3. See Software category.

IC697MSC802 GMR Redundancy System 2 K TMR I/O 486 CPU (Rack, PS, CPU, RAM, 3-GBC).. TBDNote: MSC800, MSC801 and MSC802 require GMR Configuration software IC641SWP714 for phase 2 or IC641SWP715 for phase 3. See Software category.

IC697RCM711 Redundancy Communication Module (2 per system required)................................... 0.431Note: The following manuals are recommended for the 90-70 Hot Standby RCM: GFK-0262, GFK-0827

IC697CBL803 Cable, RCM Communication(1m)................................................................................ TBD*IC697CBL811 Cable, RCM Communications (3m)............................................................................. 0.770IC697CBL826 Cable, RCM Communications (6m)............................................................................. 2.500IC641SWP715 Genius Modular Redundancy Software (GMR) Programming Software (Phase 3)..... 0.675

Note: Version 7.01 is the first TUV approved version of Genius Modular Redundancy (GMR) Phase III software for use in Fire and Gas Applications. TUV Approval for Emergency Shutdown (ESD) application has been extended as well.

Compatible with GMR CPUs. Requires IC690ACC901 and IC690CBL714, not included.

IC641SWP745 Genius Modular Redundancy (GMR) Programming Software (Phase 4)................... 0.779Note: TUV approved version of Genius Modular Redundancy (GMR) Phase IV software for use in Fire and Gas Applications.

*

IC660BRD020 Genius 24/48 Vdc Source Block for Redundancy "T" Output Configurations.............. 1.558Note: This Genius block is intended for use with GMR systems requiring "T" output configurations. It's terminal assembly include blocking diodes, preventing current backfeeding between blocks.

*

IC660ERD020 Genius 24/48 Vdc Source Electronics Module for Redundancy "T" Output Configurations

1.612

Note: This Genius electronics module is to be used in combination with the IC660TRD020 terminal asm. Both are intended for use with GMR systems requiring "T" output configurations. The IC660TRD020 terminal assembly includes blocking diodes, preventing current

*

IC660SLA020 Red Safety Label Kit for IC660BBA020 Genius Blocks............................................... 0.206Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.

*

IC660SLA021 Red Safety Label Kit for IC660BBA021 Genius Blocks............................................... TBDNote: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.

*


Item Status



(kg)



*


*


*


*


*


*


*


*

IC660SLD020 Red Safety Label Kit for IC660BBD 020 Genius Blocks.............................................. 0.412Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.

*

IC660SLD021 Red Safety Label Kit for IC660BBD 021 Genius Blocks.............................................. 0.412Note: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.

*

IC660SLD024 Red Safety Label Kit for IC660BBD 024 Genius Blocks.............................................. TBDNote: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.

*

IC660SLD025 Red Safety Label Kit for IC660BBD 025 Genius Blocks.............................................. TBDNote: Genius block plastic cover labels. Red to differentiate and I.D. blocks as being used in a safety oriented application. Qty. 50 normal labels and qty. 50 inverted labels included.

*

IC660TRD020 Genius 24/48Vdc Terminal Asm. for Redundancy "T" Output Configuration.............. 1.443Note: This Genius terminal asm. is to be used in combination with the IC660ERD020 electronics module. Both are intended for use with GMR systems requiring "T" output configurations. The IC660TRD020 terminal assembly includes blocking diodes, preventing current

*

IC687BEM713 Half Slot Bus Transmitter Module................................................................................ 0.188Note: For use with integrators racks or dual redundant racks (IC697CHS770 & IC697CHS771). Takes up the space of only one 0.8 inch VME slot, allowing a 90-70 CGR system to fit in one dual redundant rack. Typically used in combination with IC687RCM711.

*

IC687RCM711 Half Slot Redundant Communications Module for HSB Systems............................... TBDNote: Notes_ENFor use with integrators racks or dual redundant racks (IC697CHS770 & IC697CHS771). Takes up the space of only one 0.8 inch VME slot, allowing a 90-70 CGR system to fit in one dual redundant rack. Typically used in combination with IC687BEM713.

*


Item Status



(kg)


IC697CHS770 Redundant Rack (Dual) Rear Mount........................................................................... 5.108Note: This rack has two power supply slots and 12 backplane slots divided into two separate sections, each having a power supply slot and six backplane slots. Backplane connectors are spaced on 0.8 inch centers to accommodate VME modules. Blank slot interrupt

*

IC697CHS771 Redundant Rack (Dual) Front Mount........................................................................... 5.108Note: This rack has two power supply slots and 12 backplane slots divided into two separate sections, each having a power supply slot and six backplane slots. Backplane connectors are spaced on 0.8 inch centers to accommodate VME modules. Blank slot interrupt

*

SERIES 90-70 UPGRADE KITS44Ayyyyyy-Gyy Series 90-70 Firmware Upgrade Kit (Per Kit).............................................................. TBD

PROGRAMMING SOFTWARE FOR SERIES 90-70GE Fanuc PLC’s are programmed with CIMPLICITY Machine Edition (ME), which is a suite of machine level software components to develop Control, HMI and Motion applications within a single unified working environment. CIMPLICITY ME development software runs on Windows 98, NT4.0 or 2000.


Series 90-70 features (version 2.5):

Supported features: All 90-70 Instructions; Indirect References; Parametrized Subroutine Blocks (PSBs); Standalone C Programs; C Blocks; VME Interrupt triggered logic execution; Configuration of Bulk Memory Area (BMA); Configuration of Hot Standby CPU Redundancy. Not supported features: Sequential Function Chart programming (SFC); Configuration of Genius Remote I/O Racks (GR7); Word-for-word changes; Configuration of FIP Bus Controllers; Configuration of advanced user parameters for Ethernet. Many of the features not supported in version 2.5 will be supported in the next release of Machine Edition 3.0. Please call for details and availability.

Hardware support:-Logic Developer PLC Professional Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90 Micro PLC’s, Series 90-30 and Series 90-70 PLC’s.


PROGRAMMING SOFTWARE SINGLE LICENSE PACKAGESIC646MPP001 Logic Developer - PLC Professional Edition, single license, software only................. 0.500*IC646MPP101 Logic Developer - PLC Professional Edition, single license, with Programming

Cable and RS485 Mini-Converter0.500*



Item Status



(kg)


PROGRAMMING SOFTWARE MULTIPLE LICENSE PACKAGESIC646MPP005 Logic Developer - PLC Professional Edition - 5 Pack................................................. 0.500*IC646MPP010 Logic Developer - PLC Professional Edition - 10 Pack............................................... 0.500*IC646MPP050 Logic Developer - PLC Professional Edition - 50 Pack.............................................. 0.500*IC646MPPS50 Logic Developer - PLC Professional Edition - 50 Seat Site License........................... 0.500*IC646MPPS99 Logic Developer - PLC Professional Edition - Unlimited Seat Site License................ 0.500


*



PROGRAMMING SOFTWARE UPGRADESIC646MPPU01 Logic Developer - PLC Professional Edition, single license, Upgrade from

VersaPro Professional, Logicmaster 90-70 or Control. (Serial number required with valid subscription service).

0.500

Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster Series 90-70 with valid subscription service. Please provide serial number.

*

IC646MPPU11 Logic Developer - PLC Professional Edition, single license, Upgrade from VersaPro Professional Edition, Logicmaster 90-70 or Control. (Serial number required, valid subscription service not required)

0.500

Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster Series 90-70. Please provide serial number.

*

PROGRAMMING SOFTWARE UPGRADE SERVICE & PRODUCT SUPPORT (SAFE)SA648MPP001 SAFE for Logic Developer - PLC Professional single license..................................... 2.978*SA648MPP005 SAFE for Logic Developer - PLC Professional 5 Pack................................................ 2.978*SA648MPP010 SAFE for Logic Developer - PLC Professional 10 Pack.............................................. 2.978*SA648MPP050 SAFE for Logic Developer - PLC Professional 50 Pack.............................................. 2.978*SA648MPPS50 SAFE for Logic Developer -PLC Professional 50 Seat Site License........................... 2.978*SA648MPPS99 SAFE for Logic Developer -PLC Professional Unlimited Seat Site License................ 2.978*

PROGRAMMING SOFTWARE LEGACY PRODUCTSGE Fanuc recommends using CIMPLICITY ME to program GE Fanuc PLC’s. Previous programming software packages such as VersaPro, Control or Logicmaster are available and are continuously enhanced with features and product support. Please refer to the software section to the end of the price list for ordering information.

SERIES 90-70 GMR PROGRAMMING SOFTWAREIC641SWP715 Genius Modular Redundancy Software (GMR) Programming Software (Phase 3)..... 0.675




Item Status



(kg)


SERIES 90-70 C TOOLKITSIC641SWP709 C Programmer's Toolkit for Series 90 PLCs, Standard............................................... 0.655



M0802

IC641SWP719 C Programmer Toolkit Professional For Series 90-70 PLCs....................................... 0.573Note: The Toolkit Professional includes the standard 90-70 C Toolkit and all files required to operate the C Application Debugger embedded in all release 6.00 and later Series 90-70 CPUs. The debugger is not available for programs and blocks written for Series 90-30 CPUs.

This product is a software product which is licensed to the user for use on a single PC at a time. It can be used to create C function blocks which can be executed in any compatible Series 90-70 PLC. Once a C block is created it can be placed in a Logicmaster or Control for Series 90-70 Library and handled like any other program element.

· 90-70 C Development Software on 3 1/2" and 5 1/4" media· User's Manual - GFK-0646 · Technical Support.· Requires signed Toolkit License (GFJ-318) before purchase

D0802


M0802



Item Status



(kg)


SERIES 90-70 HOST COMMUNICATION TOOLKITSIC641SWP058 Host Communication Toolkit for Windows 95/NT C/C++ Applications........................ 0.018

Note: The Host Communication Toolkit provides a means to communicate to Series 90-30 or Series 90-70 controller through its Ethernet Interfaces (IC693CMM321, IC697CMM741/ 742). The toolkit can be used to develop applications which run on a PC running Windows 95 or Windows NT. The Host Communications software also supports applications development on a PC running Microsoft Windows for Workgroups, an HP-UX 9000 workstation, a DEC VAX/VMS™ workstation, or a DEC Alpha AXP/VMS™ workstation. The host-to-PLC communications uses TCP/IP (Transmission Control Protocol and Internet Protocol) across an Ethernet Local Area Network (LAN) or SNP protocol over a serial line.

Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058) is a runtime toolkit which allows Microsoft Windows NT user-written C or C++ applications to access data from Series 90-70/90-30/90-20 and Micro Controllers. This toolkit requires Microsoft 32 bit compiler. This catalog number requires and includes one copy of the Host Drivers for Windows 95/NT (IC641SWP080). Signed Toolkit License (GFJ-318) required prior to purchase.

Includes: IC641SWP080 Host Drivers for Windows 95/NTGFK-0870 Host Communications Toolkit C/C++ User's ManualTechnical SupportObject file on distribution media (one 3.5 inch high-density diskette).

D0802

IC641SWP080 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 1......................................... 0.018Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP communications software and the Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-0317) for a single machine. The IC641SWP081 product is provided as a convenience to users requiring use of the Host software on multiple platforms.

M0802


M0802

SERIES 90-70 OTHER SOFTWAREIC641SWP040 SNP Object Code DOS Driver, Single User License................................................... 0.405 D0802IC641SWP041 SNP C Source code DOS driver, Multi User License.................................................. 0.032

Note: For IC641SWP041 a license agreement has to be signed before ordering the product (GFJ-313). Use Order form GFJ-065A-EU.

D0802

IC641SWP042 SNP Object code DOS driver, Multi User License....................................................... 0.032 M0802IC641SWP061 PCM Development Software....................................................................................... 2.145 M0802IC641SWP063 PCM Support Software................................................................................................ 0.398 M0802IC651ENS040 Series 90-70 MMS/Ethernet Software for IC697CMM741........................................... 1.039# M1102IC651ENS042 Series 90-70 TCP/IP/Ethernet Software for IC697CMM741....................................... 0.733# M1102


Item Status



(kg)


SERIES 90-70 DOCUMENTATIONGFK-yyyy Series 90-70 Manuals (per manual)............................................................................IC697LBR701 Series 90-70 Paper Manuals Library........................................................................... 14.424IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095





Item Status

OPERATOR CONTROL STATION (OCS)


(kg)


MINI OCSIC300OCS031 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos.

logic with ESCP) - no network interface0.822

IC300OCS033 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) with High Speed Counter and PWM/PT - no network interface

1.181

IC300OCS035 Mini OCS with 8 DC Inputs (12/24 VDC), 6 Relay Outputs (4.0 A per point) - no network interface

0.938

IC300OCS036 Mini OCS with 8 AC Inputs (120 VAC), 8 AC Outputs (80-250 VAC 0.3 A per point) - no network interface

TBD

IC300OCS037 Mini OCS with 8 AC Inputs (120 VAC), 6 Relay Outputs (4.0 A per point) - no network interface

TBD

IC300OCS041 Mini OCS with 16 DC Inputs (12/24 VDC), 12 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) - no network interface

0.895

IC300OCS052 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) and 4 Analog In / 2 Analog Outputs (Voltage) - no network interface

0.888

IC300OCS053 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) and 4 Analog In / 2 Analog Outputs (Current) - no network interface

0.890

Note: Each Mini OCS comes with 2x20 LCD display and 16-key tactile feel keypad. The Mini OCS is designed for applications with less than 28 I/O. The Mini OCS combines a logic controller, operator interface, I/O's and optional networking in one compact system. The Mini OCS cannot be expanded by using SmartStack I/O Modules. The built-in RS-232 serial port is modem compatible and supports CsCAN , Modbus master/slave and serial read/write commands.

MINI OCS WITH INTEGRATED NETWORK INTERFACEIC300OCS061 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos.

logic with ESCP) - integrated network0.879

IC300OCS063 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) with High Speed Counter and PWM/PT - integrated network

0.961

IC300OCS065 Mini OCS with 8 DC Inputs (12/24 VDC), 6 Relay Outputs (4.0 A per point) - integrated network

0.839

IC300OCS066 Mini OCS with 8 AC Inputs (120 VAC), 8 AC Outputs (80-250 VAC 0.3 A per point) - integrated network

0.872

IC300OCS067 Mini OCS with 8 AC Inputs (120 VAC), 6 Relay Outputs (4.0A per point) - integrated network

0.950

IC300OCS071 Mini OCS with 16 DC Inputs (12/24 VDC), 12 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) - integrated network

0.988

IC300OCS082 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) and 4 Analog In / 2 Analog Outputs (Voltage) - integrated network

0.897

IC300OCS083 Mini OCS with 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC, 0.5 A pos. logic with ESCP) and 4 Analog In / 2 Analog Outputs (Current) - integrated network

0.893

Note: Each Mini OCS comes with 2x20 LCD display and 16-key tactile feel keypad. The Mini OCS is designed for applications with less than 28 I/O. The Mini OCS combines a logic controller, operator interface, I/O's and optional networking in one compact system. The Mini OCS cannot be expanded by using SmartStack I/O Modules. The built-in RS-232 serial port is modem compatible and supports CsCAN , Modbus master/slave and serial read/write commands. The CAN port supports CsCAN and DeviceNet Slave.

OCS MAIN UNITSIC300OCS100 OCS with 2x20 LCD Display and 17-key tactile feel keypad....................................... 1.500IC300OCS200 OCS with 4x20 LCD Display and 32-key tactile feel keypad....................................... 1.600IC300OCS250 OCS250 with 240 x 128 Pixels Mono Graphic LCD. 36-key tactile feel keypad.......... 2.700IC300RCS210 Remote Control Station (OCS without keypad and display)........................................ 0.850

Note: OCS100/200/250 as well as the RCS210 support up to four SmartStack I/O Boards. The built-in RS-232 serial port is modem compatible and supports CsCAN , Modbus master/slave and serial read/write commands. The additional CAN port supports CsCAN and DeviceNet Slave.


Item Status



(kg)


SMART STACK DIGITAL COMBO MODULESIC300DIQ612 8 DC Inputs (12/24 VDC, pos/neg logic), 6 Relay Outputs (4.0 A per point isolated). 0.500IC300DIQ616 8 DC Inputs (12/24 VDC, pos/neg logic), 8 DC Outputs (5/12/24 VDC, 0.5A, pos

logic with ESCP)0.500

IC300DIQ622 8 AC Inputs (120 VAC), 6 Relay Outputs (4.0A per point).......................................... 0.532IC300DIQ624 8 AC Inputs (120 VAC), 8 AC Outputs (80-250 VAC, 0.3A)........................................ 0.500IC300DIQ716 16 DC Inputs (12/24 VDC), 12 DC Outputs (5/12/24 VDC, 0.5A pos logic with

ESCP) - not compatible with RCS2100.507

IC300DIQ935 32 DC Inputs (24VDC, pos/neg logic), 40 DC Outputs (5-35VDC, neg logic only)..... 0.499IC300DIQ712 14 DC Inputs (12/24 VDC, pos/neg logic), 10 Relay Outputs (3A Isolated, 2 per

common)TBD

IC300DIQ722 14 AC Inputs (120-160 VAC, pos/neg logic), 10 Relay Outputs (3 A Isolated, 2 per common)

TBD

Note: Each controller supports up to four SmartStack I/O modules.

SMART STACK DIGITAL I/O MODULESIC300DIM210 8 DC Inputs (12/24 VDC, pos/neg logic)..................................................................... 0.431

Note: Contact GE Fanuc or your GE Fanuc representative for availability.

IC300DQM202 8 Relay Outputs (4.0 A per point isolated)................................................................... 0.500IC300DIM310 16 DC Inputs (12/24 VDC, pos/neg logic)................................................................... 0.431

Note: Contact GE Fanuc or your GE Fanuc representative for availability.

IC300DIM410 32DC Inputs (12VDC/24VDC, pos/neg logic).............................................................. 0.431Note: Contact GE Fanuc or your GE Fanuc representative for availability.

IC300DQM306 16 DC OUPUTS (POS. LOGIC).................................................................................. 0.500IC300DQM406 32 DC OUPUTS (POS. LOGIC).................................................................................. 0.500IC300DQM902 20 Relay Outputs (250VAC, 30VDC, 2.0A)................................................................. 0.500


SMART STACK ANALOG INPUT MODULESIC300ADC010 2 channel Analog Inputs, Voltage (0-5 VDC, +/-5 VDC, 0-10 VDC, +/-10 VDC), 12

bit0.500

IC300ADC110 4 channel Analog Inputs, Voltage (0-5 VDC, +/-5 VDC, 0-10 VDC, +/-10 VDC), 12 bit

0.500

IC300ADC020 2 channel Analog Inputs, Current (0-20 mA, 4-20 mA), 12 bit..................................... 0.500IC300ADC920 12 Channel Analog Input, Current, Voltage or Thermistor.......................................... TBDIC300ADC120 4 channel Analog Inputs, Current (0-20 mA, 4-20 mA), 12 bit..................................... 0.500IC300THM000 2 channel Thermocouple Inputs (J, K, T, E), 18 bit and +/-25mV, +/-50mV and +/-

100mV millivolt inputs0.500

IC300THM100 4 channel Thermocouple Inputs (J, K, T, E), 18 bit and +/-25mV, +/-50mV and +/-100mV millivolt inputs

0.500

IC300RTD000 2 channel RTD Inputs (Pt-100, Pt-200, Pt-500, Pt-1000), 18 bit................................. 0.500IC300RTD100 4 channel RTD Inputs (Pt-100, Pt-200, Pt-500, Pt-1000), 18 bit................................. 0.500


SMART STACK ANALOG OUTPUT MODULESIC300DAC001 2 channel Analog Outputs, Voltage (+/-10 VDC), 14 bit.............................................. 0.500IC300DAC101 4 channel Analog Outputs, Voltage (+/-10 VDC), 14 bit.............................................. 0.500IC300DAC002 2 channel Analog Outputs, Current (4-20 mA), 14 bit................................................. 0.500IC300DAC102 4 channel Analog Outputs, Current (4-20 mA), 14 bit................................................. 0.500IC300DAC202 8 Channel Analog Outputs, Voltage............................................................................ 0.500

Note: Each controller (OCS100/200 and RCS210) supports up to four SmartStack I/O modules.


Item Status



(kg)


SMART STACK MIXED ANALOG MODULESIC300MIX111 2 channel Voltage (+/-10 VDC) Inputs, 2 channel Voltage (+/-10 VDC) Outputs........ 0.500IC300MIX122 2 channel Current (4-20 mA) Inputs, 2 channel Current (4-20 mA) Outputs............... 0.500

Note: Each controller (OCS100/200 and RCS210) supports up to four SmartStack I/O modules.

SMART STACK MIXED DISCRETE AND ANALOG MODULESIC300MIX901 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC,0.5 A pos logic with ESCP)

and 4 channels Analog Inputs, voltage (0-5 VDC, +/-5 VDC, 0-10 VDC, +/-10 VDC), 12 bit; 2 channels Analog Outputs, voltage (+/-10 VDC) - not compatible with RCS210

0.530

IC300MIX902 8 DC Inputs (12/24 VDC), 8 DC Outputs (5/12/24 VDC,0.5 A pos logic with ESCP) and 4 channels Analog Inputs, current (0-20 ma, 4-20 ma), 12 bit; 2 channels Analog Outputs, current (4-20 ma) - not compatible with RCS210

TBD

IC300MIX912 8 DC Inputs, 8 DC Outputs (pos. logic) 4 Isolated Channel Analog Input Current, 2 Isolated Channel Analog Output Current,

0.500

IC300MIX963 Temperature Controller I/O board, 4 temperature Inputs (RTD/Thermocouple) selectable ch.-by-ch., 2 channel Analog Outputs, current (4/20mA), 2 Relay Outputs 250vac, 30vdc, 5.0A), 2 DC Outputs (5/12/24vdc, 0.5A neg. logic with ESCP)

0.500


SMART STACK SPECIALITY MODULESIC300ETN100 Ethernet Communication Module................................................................................ 0.400IC300STP100 Stepper Indexer: Single Axis, supports Pulse Train output and Quadrature or

Up/Down inputTBD

IC300ASC100 ASCII BASIC: Three ports, 64K program memory...................................................... 0.993IC300HSC601 High Speed Counter and PWM/Pulse Train: 8 configurable DC inputs with up to 2

counters max. 10MHz each (Single or A Quad B) and 8 DC pos logic outputs with ESCP configurable (up to 2 PWM/Pulse Train 5 MHz each)

0.500

IC300ACM200 Power Monitoring Stack............................................................................................... TBDNote: Single Phase Power Monitor Module


OCS INTERFACE MODULESIC693CDC200 Series 90-30 CsCAN interface module. One CsCAN port and one programming

port for the network devices.0.570#

IC320CGM500 ISA CsCAN Interface Board........................................................................................ 0.140IC320CGM502 Dual Channel ISA CsCAN Interface Board................................................................. 0.140IC320CGM510 OPC Server for CsCAN (requires IC320CGM500)...................................................... 0.140

OCS DEVELOPMENT SOFTWAREIC300OSW232 Cscape programming software (CD ROM), RS-232 programming cable and

complete software/hardware documentation1.000

Note: Cscape software integrates logic, messaging and network into a single solution. Cscape runs on Windows95, 98, NT,2000 and XP environments.


Item Status



(kg)


OCS DOCUMENTATIONGFK-1601 OCS: SmartStack I/O Modules User's Manual............................................................ TBDGFK-1630 OCS: Cscape Programming Software User's Manual................................................. TBDGFK-1631 OCS: Operator Control Station Hardware Manual...................................................... TBDGFK-1635 OCS: CsCAN Network OPC Server User's Manual.................................................... TBDGFK-1642 OCS: Operator Control Station Demonstration Case Manual..................................... TBDGFK-1643 OCS: SmartStack User's Manual - Supplement for High Speed Counter................... TBDGFK-1644 OCS: SmartStack User's Manual - Supplemente for Stepper Positioning Module...... TBDGFK-1648 OCS: CAN Data Concentrator Module........................................................................ TBDGFK-1666 OCS: SmartStack User's Manual - Supplement for ASCII BASIC Module.................. TBDGFK-1673 OCS: ISA CsCAN Interface Board Product Specification and Installation Data.......... TBDGFK-1687 Mini OCS: Operator Control Station Hardware Manual............................................... TBDIC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095





Item Status

VERSAPOINT™ I/O SYSTEM


(kg)


VERSAPOINT NETWORK INTERFACE UNITSIC220PBI001 PROFIBUS-DP Network Interface Unit....................................................................... TBD

Note: Requires 1 out of IC220TBK087 (contains qty. 10)

IC220DBI001 Devicenet Network Interface Unit................................................................................ TBDNote: Requires 1of IC220TBK201

VERSAPOINT POWER TERMINALSIC220PWR001 Power Terminal 24VDC............................................................................................... TBD


IC220PWR002 Power Terminal 24VDC, Fused................................................................................... TBDNote: Requires 1 out of IC220TBK087 (contains qty. 10)

*

IC220PWR003 Power Terminal 24VDC, Fused w/ Diagnostic............................................................ TBDNote: Requires 1 out of IC220TBK087 (contains qty. 10)

*

IC220PWR101 Power Terminal 120 VAC............................................................................................ TBDNote: Requires 1 of IC220TBK204

*

IC220PWR201 Power Terminal 230 VAC............................................................................................ TBDNote: Requires 1 of IC220TBK204

*

VERSAPOINT SEGMENT TERMINALSIC220PWR011 Segment Terminal 24VDC........................................................................................... TBD


IC220PWR012 Segment Terminal 24VDC Fused................................................................................ TBDNote: Requires 1 out of IC220TBK087 (contains qty. 10)

*

IC220PWR013 Segment Terminal 24VDC Fused w/ Diagnostic......................................................... TBDNote: Requires 1 out of IC220TBK087 (contains qty. 10)

*

IC220PWR014 Segment Terminal 24VDC Elec. Fused....................................................................... TBDNote: Requires 1 out of IC220TBK087 (contains qty. 10)

*

VERSAPOINT DISCRETE INPUT MODULESIC220MDL641 Input 24VDC Pos. Logic 2PT....................................................................................... TBD


IC220MDL642 Input 24VDC Pos. Logic 4PT....................................................................................... TBDNote: Requires 1 out of IC220TBK122 (contains qty. 10)

IC220MDL643 Input 24VDC Pos. Logic 8PT....................................................................................... TBDNote: Requires 4 out of IC220TBK082 (contains qty. 10)

IC220MDL644 Input 24VDC Pos. Logic 16PT..................................................................................... TBDNote: Requires 4 out of IC220TBK122 (contains qty. 10)


Item Status



(kg)


VERSAPOINT DISCRETE OUTPUT MODULESIC220MDL751 Output 24VDC Pos. Logic 0.5A 2PT........................................................................... TBD


IC220MDL721 Output 24VDC Pos. Logic 2.0A 2PT........................................................................... TBDNote: Requires 1 out of IC220TBK82 (contains qty. 10)



IC220MDL754 Output 24VDC Pos. Logic 0.5A 16PT......................................................................... TBDNote: Requires 4 out of IC220TBK123 (contains qty. 10)

IC220MDL930 Output Relay, 5-253 V AC, 3A, 1PT........................................................................... TBDNote: Requires 1 out of IC220TBK085 (contains qty. 10)

IC220MDL940 Output Relay, 5-253 V AC, 3A, 4PT............................................................................ TBDNote: Requires 4 out of IC220TBK085 (contains qty. 10)

*

IC220ACC201 Relay Module Electrical Isolation Set.......................................................................... TBDNote: Requires 1of IC220TBK206

*

VERSAPOINT ANALOG INPUT MODULESIC220ALG220 Analog Input 15 BIT Voltage/Current 2CH.................................................................. TBD


IC220ALG221 Analog Input 15Bit Voltage/Current 8CH..................................................................... TBDNote: Requires 4 out of IC220TBK062 (contains qty. 5)

*

IC220ALG620 Analog Input 16 BIT RTD 2CH.................................................................................... TBDNote: Requires 1 out of IC220TBK062 (contains qty. 5)

IC220ALG630 Analog Input 16 BIT Thermocouple 2CH.................................................................... TBDNote: Requires 1 out of IC220TBK062 (contains qty. 5)

VERSAPOINT ANALOG OUTPUT MODULESIC220ALG320 Analog Output 16 BIT Voltage/Current 1CH................................................................ TBD

Note: Requires 1 of IC220TBK203

IC220ALG321 Analog Output 16 Bit Voltage 1CH.............................................................................. TBDNote: Requires 1 out of IC220TBK061 (contains qty. 5)

IC220ALG322 Analog Output 13 Bit Voltage 2CH.............................................................................. TBDNote: Requires 1 out of IC220TBK062 (contains qty. 5)


Item Status



(kg)


VERSAPOINT SPECIAL FUNCTION MODULESIC220MDD842 Incremental Encoder Input, 4 Digital Inp. 24VDC, 4 Digital Outp. 24 VDC, 500mA,

3-wire connectionTBD


*

IC220MDD841 Absolute Encoder Input, 4 Digital Inp. 24VDC, Digital Outp. 24 VDC, 500mA, 3-wire connection

TBD


*

IC220MDD840 High Speed Counter Module....................................................................................... TBDNote: Requires 1 of IC220TBK203

*

IC220MDD850 Thermistor input, 1 Channel........................................................................................ TBDNote: Requires 1 out of IC220TBK061 (contains qty. 10)

*

VERSAPOINT MOTOR STARTER MODULESIC220STR001 Motor Starter direct, up to 1.5 kW / 400 V AC............................................................. TBD

Note: Requires 1 of IC220ACC103 or IC220ACC104

*

IC220STR003 Motor Starter reversing, up to 1.5 kW / 400 V AC....................................................... TBDNote: Requires 1 of IC220ACC103 or IC220ACC104

*

IC220STR002 Motor Starter direct, up to 3.7 kW / 400 V AC............................................................. TBDNote: Requires 1 of IC220ACC103 or IC220ACC104

*

IC220MDD850 Thermistor input, 1 Channel........................................................................................ TBDNote: Requires 1 out of IC220TBK061 (contains qty. 10)

*

IC220ACC100 Motor Starter Brake Module, DC................................................................................. 0.100*IC220ACC101 Motor Starter Brake Module, AC / DC......................................................................... 0.100*

VERSAPOINT I/O TERMINAL STRIPSIC220TBK082 I/O Terminal Strip, 8 Position Spring Style w/ Color, Qty. 10...................................... TBDIC220TBK083 I/O Terminal Strip, AC Input, Spring Style w/ Color, Qty. 10....................................... TBD*IC220TBK084 I/O Terminal Strip, AC Output, Spring Style w/ Color, Qty. 10.................................... TBD*IC220TBK085 I/O Terminal Strip, 8 Position Spring Style, Relay, Qty. 10......................................... TBDIC220TBK061 I/O Terminal Strip w/ Shield, 6 Position Spring Style, Qty. 5....................................... TBDIC220TBK062 I/O Terminal Strip w/ Dual Shield, 6 Position Spring Style, Qty. 5............................... TBD*IC220TBK122 I/O Terminal Strip, 12 Position Spring Style w/Color, Input, Qty. 10........................... TBDIC220TBK123 I/O Terminal Strip, 12 Position Spring Style w/Color, Output, Qty. 10......................... TBD

VERSAPOINT POWER TERMINAL STRIPSIC220TBK087 Power Terminal Strip, 8 Position Spring Style w/Color, Qty. 10.................................. TBD

VERSAPOINT TERMINAL STRIP SETSIC220TBK201 Terminal Strip Set, Spring Style, DeviceNet NIU......................................................... TBDIC220TBK202 Terminal Strip Set for Absolut and Incremental Encoder Interface............................. TBD*IC220TBK203 Terminal Strip Set, Spring Style, Counter/Analog Output............................................ TBDIC220TBK204 Terminal Strip Set for Power Terminal AC.................................................................. TBD*IC220TBK206 Terminal Strip Set for Relay Isolation.......................................................................... TBD*


Item Status



(kg)


VERSAPOINT ACCERSSORIESIC220ACC001 Module Labels Narrow Qty. 10.................................................................................... 0.100IC220ACC002 Module Lables Wide Qty. 10....................................................................................... TBDIC220ACC003 Point Labels Numbered 1-100 Qty. 10........................................................................ TBDIC220ACC004 Point Labels Blank Qty. 1000...................................................................................... TBDIC220ACC005 Module Keying Tabs Qty. 100..................................................................................... TBDIC220ACC103 Motor Starter Power Connector................................................................................... 0.100*IC220ACC104 Motor Starter Power Bridge......................................................................................... 0.100*IC220ACC105 Motor Circuit Connector (Qty. 10), Spare.................................................................... 0.100*

VERSAPOINT DEMO SYSTEMSIC220DEM012-EU VersaPoint Static Demo Unit....................................................................................... TBD*


Item Status

FIELD CONTROL™ I/O SYSTEM


(kg)


FIELD CONTROL BUS INTERFACE UNITS (BIU)IC670GBI002 Genius Bus Interface Unit (BIU) for Field Control, 24 Vdc Power............................... 0.720

Note: This BIU includes internal power supply and requires 24VDC power connection at 750ma max.

IC670GBI102 Genius BIU, 120 Vac Power........................................................................................ 0.750IC670PBI001 PROFIBUS-DP BIU, 24 Vdc Power............................................................................. 0.658

Note: Version IC670PBI001-AB or later supports all Field Control modules. This BIU does not support the Hot Insertion features.

HE670IBU100 Interbus-S Bus Interface Unit...................................................................................... 0.879

Note: Includes internal power supply, local station communications, BIU base, and fieldbus communications.

FIELD CONTROL BASESIC670CHS101 I/O Base (Barrier Style) w/ Hot Insertion..................................................................... 0.334IC670CHS102 I/O Base (Box Style) w/ Hot Insertion.......................................................................... 0.334IC670CHS103 I/O Base (Connector Style) w/ Hot Insertion................................................................ 0.334

Note: Hot insertion bases IC670CHS101, CHS102, CHS103 require Bus Interface Unit IC670GBI002F, IC670GBI102F or later and I/O module rev. J or later.

IC670CHS001 I/O Base (Barrier Style)............................................................................................... 0.334IC670CHS002 I/O Base (Box Style).................................................................................................... 0.299IC670CHS003 I/O base (Connector Style).......................................................................................... 0.227IC670CHS004 TC Cold Junction Compensation Base........................................................................ 0.272IC670TBM001 Auxiliary Terminal Strip, Qty. 2 (Barrier Style)............................................................. 0.091IC670TBM002 Auxiliary Terminal Strip, Qty. 2 (Box Style)................................................................. 0.091

Note: Universal Field Control bases. Minimum one required per system. Choose any combination of types. Up to four bases allowed per BIU. Select appropriate aux. TB for high density or analog modules.

FIELD CONTROL FIELD PROCESSORIC670MFP100 Micro Field Processor.................................................................................................. 0.250

Note: Intelligent station mounted processors for "Local Logic" solving.

FIELD CONTROL CABLESIC670CBL002 Expansion I/O Cable (0.5m)........................................................................................ 0.359

Note: Only one per station allowed

IC670CBL003 2 Meter Cable for Connector Style Base, connector on one end................................ 0.636IC670CBL004 2 Meter Cable for Connector Style Base, connector on both ends............................. 0.184

FIELD CONTROL DISCRETE INPUT MODULESIC670MDL233 120 Vac Input, 8 Pt., Isolated...................................................................................... 0.250IC670MDL240 120 Vac Input, 16 Pt., Grouped................................................................................... 0.317IC670MDL241 240 Vac Input, 16 Pt., 2 Groups.................................................................................. 0.272IC670MDL643 5/12 Vdc Pos./Neg. Input, 16 Pt., 2 Groups................................................................ 0.227IC670MDL640 24 Vdc Pos./Neg. Input, 16 Pt., Grouped.................................................................... 0.215IC670MDL644 12/24 Vdc Pos./Neg. Fast Input, 16 Pt., Grouped....................................................... 0.227IC670MDL641 48 Vdc Pos./Neg. Input, 16 Pt., Grouped.................................................................... 0.227IC670MDL642 125 Vdc Pos./Neg. Input, 16 Pt., Grouped.................................................................. 0.227


Item Status

FIELD CONTROL™ I/O SYSTEM


(kg)


FIELD CONTROL DISCRETE OUTPUT MODULESIC670MDL331 120 Vac 2A Output, 8 Pt., Isolated.............................................................................. 0.272IC670MDL330 12-120 Vac O,5A Output, 16 Pt., Grouped.................................................................. 0.359IC670MDL730 24 Vdc Electronic Short Circuit Protection 8 Pt. Output Module.................................. 0.352IC670MDL740 12/24 Vdc 0.5A Pos. Output, 16 Pt., Grouped............................................................. 0.227IC670MDL742 5/12 Vdc Neg. Output, 16 Pt., Grouped....................................................................... 0.204IC670MDL930 Relay 2A, 8 Pt. (6 Form A/2 Form C) Isolated............................................................. 0.250

FIELD CONTROL ANALOG INPUT MODULESIC670ALG230 Analog Input Current, 8 Channel, Grouped................................................................. 0.250HE670ADC810 Analog Input Module, +/-10V, 12 Bit (8 Channels)...................................................... 0.454IC670ALG240 Analog Input Current, 16 Channel, Grouped............................................................... 0.250IC670ALG620 RTD Input, 4 Channel, 3 wire, Isolated........................................................................ 0.250IC670ALG630 Thermocouple Input, 8 Channel, Isolated.................................................................... 0.250

FIELD CONTROL ANALOG OUTPUT MODULESIC670ALG320 Analog Output Current/Voltage, 4 Channel, Grouped................................................. 0.275IC670ALG330 Analog Output Current 8 Channel, Grouped............................................................... 0.227IC670ALG310 Analog Output Voltage, 8 Channel.............................................................................. 0.120

ACCESSORIESIC670ACC001 Base to Base Replacement Connector Cable, Qty. 12............................................... 0.136IC670ACC002 I/O Module Keying....................................................................................................... 0.045IC670ACC003 Connector Kit for Connector Style Base...................................................................... 0.386HE670ACC100 Input Simulator Module for Field Control .................................................................... 0.411IC660HHM501-CE Hand Held Monitor including European Charger 220 Vac........................................... 2.700

Note: More Genius and Hand Held Monitor Accessoties under Chapter "Genius"


Item Status

GENIUS® I/O SYSTEM


(kg)


GENIUS INTERFACE MODULESIC660ELB921 PC One Slot PCIM, XT/AT, One Channel, Driver Software........................................ 1.869IC660ELB922 PC One Slot PCIM, XT/AT, Two Channels, Driver Software....................................... 2.227

GENIUS DISCRETE I/O BLOCKSIC660BBD020 24/48 Vdc Source I/O Block, 16 Circuit, 3 wire sensor compatible............................. 1.429IC660BBD021 24/48 Vdc Sink I/O Block, 16 Circuit, 3 wire sensor compatible.................................. 1.429IC660BBD022 24 Vdc Source I/O Block, 16 Circuit, 2 & 3 wire sensor compatible............................ 1.429IC660BBD023 24 Vdc Sink I/O Block, 16 Circuit, 2 & 3 wire sensor compatible................................ 1.429IC660BBD024 12/24 Vdc Source I/O Block, 32 Circuit....................................................................... 1.406IC660BBD025 5/12/24 Vdc Sink I/O Block, 32 Circuit......................................................................... 1.429IC660BBD101 115 Vac, 8 Circuit, Low Leakage Block....................................................................... 1.565IC660BBD110 115 Vac Input Block (16 points)................................................................................... 1.429IC660BBR100 Relay Output Block, Normally Closed, 16 Circuit........................................................ 1.746IC660BBR101 Relay Output Block, Normally Open, 16 Circuit........................................................... 1.746

Note: An I/O block includes an Electronics Assembly and a Terminal Assembly, both of which may also be ordered separately. For Ful Details See Separate Replacement Part Price List.

GENIUS ANALOG I/O BLOCKSIC660BBA020 Analogue I/O Block, 24/48 Vdc Power, 4 In/2 Out....................................................... 1.406IC660BBA024 Current Source Analogue Block, 24/48 Vdc Power, 4 In/2 Out................................... 1.474IC660BBA025 Current Source Analogue Output Block, 24/48 Vdc Power, 6 Out.............................. 1.474IC660BBA026 Current Source Analogue Input Block, 24/48 Vdc Power, 6 In.................................... 1.474IC660BBA100 Analogue I/O Block, 115 Vac Power, 4 In/2 Out.......................................................... 1.678IC660BBA104 Current Source Analogue Block, 115 Vac Power, 4 In/2 Out...................................... 1.488IC660BBA105 Current Source Analogue Output Block, 115 Vac Power, 6 Out................................. 1.474IC660BBA106 Current Source Analogue Input Block, 115 Vac/125 Vdc Power, 6 In......................... 1.452


GENIUS RTD & THERMOCOUPLE INPUT BLOCKSIC660BBA021 RTD Input Block, 24/48 Vdc Power, 6 Channels......................................................... 1.452IC660BBA101 RTD Input Block, 115 Vac/125 Vdc Power, 6 Channels.............................................. 1.483IC660BBA023 Thermocouple Input Block, 24/48 Vdc Power, 6 Channels (Types J,K,T,E,B,R,S,N). 1.497IC660BBA103 Thermocouple Input Block, 115 Vac/125 Vdc Power, 6 Channels (Types

J,K,T,E,B,R,S,N)1.465


GENIUS SPECIAL FUNCTION BLOCKSIC660BBD120 High Speed Counter Block, 200 KHz, 115 Vac or 10 to 30 Vdc Power....................... 1.678IC660BPM100 Genius PowerTRAK Block, 115 Vac or 125 Vdc......................................................... 4.087


GENIUS CABLES & BUS TERMINATORSIC660BLC001 Prefabricated Cable, Belden 9182, 38cm (qty. 3)........................................................ 0.250IC660BLC003 Prefabricated Cable, Belden 9182, 1m (qty. 1)........................................................... 0.200IC660BLM506 150 Ohm Bus Terminator (qty. 4)................................................................................ 0.052IC660BLM508 75 Ohm Bus Terminator (qty. 4).................................................................................. 0.064


Item Status

GENIUS® I/O SYSTEM


(kg)


GENIUS HAND HELD MONITOR & ACCESSORIESIC660HHM501-CE Hand Held Monitor including European Charger 220 Vac........................................... 2.700

Note: More Genius and Hand Held Monitor Accessoties under Chapter "Genius"

IC660BLM507 Block Puller.................................................................................................................. 0.508IC660BSM021 24/48 Vdc Bus Switching Module................................................................................ 0.142IC660BSM120 115 Vac/125 Vdc Bus Switching Module..................................................................... 0.113IC660MBM503 HHM Panel Mount Kit.................................................................................................. 0.410IC660MPH509 HHM Permanent Bus Mounting Plate (qty. 3)............................................................. 0.068IC660FW4299 HHM 220 Vac Charger with European Plug (Spare)................................................... 0.350IC660BPM500 HHM Battery Pack (Spare).......................................................................................... 0.184IC660HHC005 HHM Cable (Spare)..................................................................................................... 0.100IC660MLX000 Various GENIUS Labels.............................................................................................. 3.771#IC660MCK501 PCIM 6 Position Connector (Spare, qty. 2) for IC660ELB906 only............................. 0.023IC660MKS511 HHM Spare Key Set (Spare, qty. 10).......................................................................... 0.04544A736310-001R01 Genius HHM Connector Block..................................................................................... TBD#

GENIUS UPGRADE KITS44Azzzzzz-Gzz Genius Firmware Upgrade Kit (Per Kit)....................................................................... TBD


Item Status

BUSSTOP I/O SYSTEM


(kg)


BUSSTOP I/O BLOCKSIC675PDI081 BusStop Input Station 24VDC (8 Pts) w/ Profibus Interface........................................ 0.600*IC675PDI161 BusStop Input Station 24VDC (16 Pts) w/ Profibus Interface...................................... 0.744*IC675PDM841 BusStop Input/Output Station 24VDC (8 Inp./4 Outp. Pts, 2.0A) w/ Profibus

Interface0.650*

IC675PDM881 BusStop Input/Output Station 24VDC (8 Inp./8 Outp. Pts, 0.5A) w/ Profibus Interface

0.750*

IC675PDO081 BusStop Output Station 24VDC (8 Pts, 0.5A) w/ Profibus Interface............................ 0.743*IC675PDO161 BusStop Output Station 24VDC (16 Pts, 0.5A) w/ Profibus Interface.......................... 0.744*

BUSSTOP CABLES & ACCESSORIESIC675PCB002 Profibus Cord Set - 2 Meter......................................................................................... 0.155*IC675PCB005 Profibus Cord Set - 5 Meter......................................................................................... 0.336*IC675PCB010 Profibus Cord Set - 10 Meter....................................................................................... 0.638*IC675PTE101 Profibus T-Connector for BusStop I/O......................................................................... 0.050

Note: One T-Connector required for each BusStop I/O Block

*

IC675PTR001 Profibus Terminator for BusStop I/O........................................................................... 0.014*


Item Status

OPERATOR INTERFACES QUICKPANEL


(kg)


QUICKPANEL 2000 SERIES UNITSIC753QMS602 QuickPanel 6" monochrome, 100 MHz CPU, 320x240 Pixels, 2MB EPROM............. TBD

Note: Supported by GP-Pro 6.0 only.

*

IC753QSS602 QuickPanel 6" STN, 100 MHz CPU, 320x240 Pixels, 64 Colors, 1MB EPROM......... TBDNote: Supported by GP-Pro 6.0 only.

*

IC753QTS602 QuickPanel 6" TFT, 100 MHz CPU, 320X240 Pixels, 256 Colors,2MB EPROM........ TBDNote: Supported by GP-Pro 6.0 only.

*

IC753QTS702 QuickPanel 7" TFT, 100 MHz CPU, 640x480 Pixels, 256 Colors,4MB EPROM......... 2500.000Note: Supported software: ME/QuickDesigner/GP-Pro

IC753QTL002 QuickPanel 10" TFT, 100 MHz CPU, 640x480 Pixels, 256 Colors, 4MB EPROM...... 3500.000Note: Supported software: ME/QuickDesigner/GP-Pro

IC753QTL202 QuickPanel 12" TFT, 100 MHz CPU, 800x600 Pixels, 256 Colors, 4MB EPROM...... 3500.000Note: Supported software: ME/QuickDesigner/GP-Pro

IC753QMH602 QuickPanel Handy 2000 6" Mono, 100 MHz CPU, 320x240 Pixels, 1MB EPROM..... 1.200Note: Supported by GP-Pro 6.0 only.

*

IC753QSH602 QuickPanel Handy 2000 6" STN, 100 MHz CPU, 320x240 Pixels, 64 Colors,1MB EPROM

1.200


*

IC753QTH702 QuickPanel Handy 2000 7" TFT, 100 MHz CPU, 640x480 Pixels, 256 Colors,2MB EPROM

1.200


*

Note: The QuickPanel 2000 series is an extension of the exisiting QuickPanel family. These devices have an embeded Ethernet interface (not Handy), CF card slot. They are also running a 100 MHz RISC CPU with up to 4MB memory and 256 colors.The QuickPanel 2000 series can be programmed using GP-Pro 6 or QuickDesigner 3.6. Please contact GE Fanuc for minimum software requirement.


Item Status



(kg)


QUICKPANEL UNITSIC753QSS500 QuickPanel 5" STN, 25 MHz CPU, 320x240 Pixels, 8 Colors, 256K EPROM............ TBD

Note: Supported software: ME/QuickDesigner/GP-Pro

IC753QMM601 QuickPanel Mini 6" Monochrome, 100 MHz CPU, 320x240 Pixels, 1MB EPROM..... TBDNote: Supported software: ME/QuickDesigner/GP-Pro

IC753QMS601 QuickPanel 6" Monochrome, 100 MHz CPU, 320x240 Pixels, 1MB EPROM............. TBDNote: Supported software: ME/QuickDesigner/GP-Pro

IC753QSS601 QuickPanel 6" STN, 100 MHz CPU, 320x240 Pixels, 8 Colors, 1MB EPROM........... TBDNote: Supported software: ME/QuickDesigner/GP-Pro

#

IC753QTS601 QuickPanel 6" TFT, 100 MHz CPU, 320x240 Pixels, 64 Colors, 2MB EPROM.......... TBDNote: Supported software: ME/QuickDesigner/GP-Pro

IC753QEL901 QuickPanel 9" EL, 100 MHz CPU, 640x480 Pixels, 2MB EPROM.............................. TBDNote: Supported software: ME/QuickDesigner/GP-Pro

IC753QML000 QuickPanel 10" Monochrome, 25 MHz CPU, 640x480 Pixels, 1MB EPROM............. TBDNote: Supported software: ME/QuickDesigner/GP-Pro

# M06/02

IC753QSL001 QuickPanel 10" STN, 100 MHz CPU, 640x480 Pixels, 64 Colors, 2MB EPROM....... TBDNote: Supported software: ME/QuickDesigner/GP-Pro

IC753QTL001 QuickPanel 10" TFT, 100 MHz CPU, 640x480 Pixels, 64 Colors, 2MB EPROM........ TBDNote: Supported software: ME/QuickDesigner/GP-Pro

IC753QMH000 QuickPanel Handy 6" Monochrome, 25 MHz CPU, 320x240 Pixels, 1MB EPROM.... TBD# M06/02IC753QSH000 QuickPanel Handy 6" STN, 25 MHz CPU, 320x240 Pixels, 8 Colors, 1MB EPROM.. TBD# M06/02

Note: The QuickPanel is a practical and cost effective replacement for a variety of discrete devices, from push buttons and pilot lights to message centers. Free form static and dynamic graphics can be added to present an information-rich picture to the operator in a single glance. Each unit communicates with all major PLCs and PLC networks including A-B Remote I/O, Data Highway Plus, Modicon Modbus Plus, SNP/SNPX and Genius (some require an optional, field-installed module). The industrially designed QuickPanel is rated IP65F.

The QuickPanel series can be programmed using GP-Pro 6 or QuickDesigner 3.6. Please contact GE Fanuc for minimum software requirement.


Item Status



(kg)


QUICKPANEL SOFTWAREIC753SKT040 GP-Pro Kit - Software (v6) and Download Cables....................................................... TBD

Note: Software comes on CD-ROM with electronic documentation and download cable. The download cable (IC753CBL049) connects a PC (RS-232) to the Quickpanel (TTY).

IC753WIN040 GP-Pro Software - Multilanguage (v6)......................................................................... TBDNote: Download Cable need to be purchased separately (IC753CBL049 or IC753CBLETH).

IC753CBL049 IBM AT 9 pin RS-232 cable for downloading to QuickPanel....................................... TBDIC753CBLETH Ethernet Cross-over cable for direct connection (2m)................................................. TBD*IC753PRO030 Pro-Studio (v3.0)......................................................................................................... TBD*IC753WEB001 GP-Web (v1.0)............................................................................................................. TBD

Note: Required to build the Web screens. Requires GP-PRO 5. GP-Web is supported under the following units: IC753QTL202, IC753QTL002, IC753QTL001, IC753QSL001, IC753QEL901, IC753QTS702, IC753QTS601

#

IC753WEB010 GP-Web (v1.0) 10 Client............................................................................................. TBDNote: Required to send QP Screen over the web. Requires GP-PRO 5 and Pro-Server 3.0.

#

IC753WEB000 GP-Web (v1.0) No-Limitation Client............................................................................ TBDNote: Required to send QP Screen over the web. Requires GP-PRO 5 and Pro-Server 3.0.

#

IC753WEB999 GP-Web / Server SET GP-Web (v1.0) + Pro-Server v(3.0)........................................ TBDNote: Required to send QP Screen over the web. Requires GP-PRO 5.

#

QDA-EDT-001 Quickdesigner (v3.6)................................................................................................... 0.400Note: Quickdesigner software comes on CD-ROM with electronic documentation and download cable. The download cable (IC753CBL049) connects a PC (RS-232) to the Quickpanel (TTY).

QDA-UPD-001 Quickdesigner Upgrade from 3.X................................................................................ 0.100#QDA-UPD-002 Quickdesigner Upgrade from 1.X or 2.X...................................................................... TBD#

Note: GP Pro is a friendly Windows-based graphic editor that is common to all of the QuickPanel models. GP Pro offers a comprehensive set of panel operators, including: push buttons, selector switches, pilot lights, text and numeric data displays, bar-graph displays, static and dynamic bit-mapped or object oriented images and more. GP Pro is easy to use. GP Pro is the recommended programming software for all Quickpanel models. Some accessories required QuickDesigner to be used on Quickpanel.

QUICKPANEL PROGRAMMING SOFTWAREGE Fanuc QuickPanels are programmed with CIMPLICITY Machine Edition (ME), which is a suite of machine level software components to develop Control, HMI and Motion applications within a single unified working environment. CIMPLICITY ME development software runs on Windows 98/ME/NT/2000/XP.

As part of the CIMPLICITY ME family of products, QuickDesigner has been integrated into the unified working environment as View Developer for QuickPanel, which is fully compatible with existing QucikDesigner applications.View Developer for QuickPanel can be combined with Logic Developer PLC. Please refer to the CIMPLICITY Machine Edition section for details.

Hardware support:-View Developer for QuickPanel supports QuickPanel family and QuickPanel 2000 family.

BC646MQP001 View Developer for QuickPanel - 1 user...................................................................... 0.500*BC646MQP010 View Developer for QuickPanel - 10 users.................................................................. 0.500*BC646MQPS99 View Developer for QuickPanel - Unlimited Site......................................................... 0.500*

QUICKPANEL PROGRAMMING SOFTWARE - MAINTENANCEBC646MQPU01 View Developer for Quick Panels - Upgrade from QuickDesigner.............................. 0.500*SA648MQP001 SAFE for View Developer for Quick Panels - 1 user................................................... 2.978*SA648MQP010 SAFE for View Developer for Quick Panels - 10 users............................................... 2.978*SA648MQPS99 SAFE for View Developer for Quick Panels - Unlimited Site....................................... 2.978*


Item Status



(kg)


HANDY QUICKPANEL 2000 CONNECTIVITY and ACCESSORIESGP2000H-C232-3M GP2000H RS-232C Open-end Cable, 3m................................................................... TBD*GP2000H-C422-3M GP2000H RS-422 Open-end Cable, 3m..................................................................... TBD*GP2000H-D232-3M GP2000H RS-232C Cable with D-Sub, 3m................................................................. TBD*GP2000H-D422-3M GP2000H RS-422 Cable with D-Sub, 3m.................................................................... TBD*GP2000H-C232-10M GP2000H RS-232C Open-end Cable, 10m................................................................. TBD*GP2000H-C422-10M GP2000H RS-422 Open-end Cable, 10m................................................................... TBD*GP2000H-D232-10M GP2000H RS-232C Cable with D-Sub, 10m............................................................... TBD*GP2000H-D422-10M GP2000H RS-422 Cable with D-Sub, 10m.................................................................. TBD*GP2000H-AP422 GP2000H RS-422 Adapter.......................................................................................... TBD*GP2000H-DF10 GP2000H Screen Protection Sheet, Hard Type (5pcs)............................................... TBD*GP2000H-STRAP11 GP2000H Neck Strap.................................................................................................. TBD*CA1-WMALRG-01 Wall Mount Adapter to hang the unit on the wall......................................................... TBD*GP2000H-CFGD11 Replacement CF-card I/F Guard................................................................................. TBD*GP2000H-EMGD11 Replacement Emergency Switch Guard...................................................................... TBD*

QUICKPANEL NETWORK INTERFACESQPI-ABD-201 Quickpanel Interface Module for A-B Data Highway Plus........................................... 0.580

Note: Compatible with GP-PRO for 9", 10" and 12" QP.Compatible with QuickDesigner for 9", 10" and 12" QP.

QPJ-ABD-201 Quickpanel jr. Interface for AB DH Plus...................................................................... 0.560Note: Compatible with GP-PRO for 5", 6" 25Mhz Mono and STN and 6" 100MHz TFT.Compatible with QuickDesigner for 5" and 6" QP.

QPI-ABR-201 Quickpanel Interface Module for A-B 1771 Remote I/O.............................................. 0.590Note: Compatible with GP-PRO for 9", 10" and 12" QP.Compatible with QuickDesigner for 9", 10" and 12" QP.

QPJ-ABR-201 Quickpanel jr. Interface Module for A-B 1771 Remote I/O.......................................... 0.560Note: Compatible with GP-PRO for 5", 6" 25Mhz Mono and STN and 6" 100MHz TFT.Compatible with QuickDesigner for 5" and 6" QP.

IC753MMPL00 QP MPI Adapter for Siemens S7-MPI......................................................................... TBDNote: Compatible with GP-Pro only.

IC753MPF221 Quickpanel Interface Module for Profibus - QP 2000 Series....................................... TBDNote: Compatible with 7", 10" and 12" 2000 Series only. GP-Pro required.

*

QPI-PBS-202-D Quickpanel Interface Module for Profibus - 9" and 10" QP......................................... TBDNote: Compatible with QuickDesigner only.

*

IC753MPFS21 Quickpanel Interface Module for Profibus - 5" and 6" QP........................................... TBDNote: Compatible with GP-PRO only for 5" and 6" QP. Require the Bus Conversion Unit (IC753MPF999) to be used with for 9" and 10" QP. Not compatible with 2000 series (order IC753MPF221).

*

IC753MPF999 Bus Conversion Unit for Profibus Module.................................................................... TBD*IC753MCV999 Bus Conversion Unit for QP2000................................................................................ TBD

Note: Must be purchased to connect QPJ modules to new QP 2000 Series.

IC753METL00 Ethernet Interface for Quickpanel................................................................................ TBDNote: Compatible with GP-PRO for 9", 10" and 12" QP.

Note: Contact GE Fanuc representative for Quickpanel compatibility or other communication modules.


Item Status



(kg)


COMMUNICATION CABLES FOR GE FANUC SERIES 90 PLCIC753CBL053 25 pin RS-232.............................................................................................................. TBD

Note: 3 meters length.

IC753CBL082 15 pin RS-422.............................................................................................................. TBDNote: 3 meters length.


IC753CBL118 Series Six PLC............................................................................................................ TBDNote: For Genius use Genius Interface (Ask for availability).

IC753CBL119 SNP RJ45 Cable......................................................................................................... TBDNote: 3 meters length.

COMMUNICATION CABLES FOR ALLEN-BRADLEYIC753CBL051 KF2 module, 25 pin RS-232........................................................................................ TBDIC753CBL052 9 pin RS-232................................................................................................................ TBD



IC753CBL083 SLC500, DH-485......................................................................................................... TBDIC753CBL084 SLC500, DH-486 multiport.......................................................................................... TBDIC753CBL090 PLC-2, program port, 15 pin RS-422........................................................................... TBDIC753CBL106 MicroLogix, Programming Port, 8 pin circular DIN RS-232......................................... TBDIC753CBL107 PLC-5, Channel 0, 25 pin RS-422............................................................................... TBD

COMMUNICATION CABLES FOR AROMATIC753CBL111 Aromat, FP1 (MEWNET) 25 to 9 pin RS-232.............................................................. TBD

COMMUNICATION CABLES FOR B&RIC753CBL098 B&R MININET, 2 plated wires RS-422........................................................................ TBD

COMMUNICATION CABLES FOR HITACHIIC753CBL115 Hitachi, S10, 4 wire RS-422........................................................................................ TBD

COMMUNICATION CABLES FOR IDECIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL109 IDEC, Micro 3, 25 to 9 pin RS-422.............................................................................. TBD


Item Status



(kg)


COMMUNICATION CABLES FOR KEYENCEIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL112 Keyence, KV-L2, KV-10R Program port, RJ11 connector RS-232.............................. TBD

COMMUNICATION CABLES FOR MITSUBISHIIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL088 MITSUBISHI A1S COMP LINK MOD, 9 pin RS-232.................................................. TBDIC753CBL091 MITSUBISHI FX Program Port................................................................................... TBD

COMMUNICATION CABLES FOR MODICONIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL058 9 pin RS-232 (984 Slot and Compact)......................................................................... TBDNote: 3 meters length.

IC753CBL102 MODICON 984 MICRO, RJ45 headset connector RS232.......................................... TBDNote: 3 meters length.

IC753CBL581 Modicon 984 Slot......................................................................................................... TBDIC753CBL582 AEG Modicon Slot PR................................................................................................. TBD

COMMUNICATION CABLES FOR OMRONIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL067 OMRON C20H Series 9 pin RS-232........................................................................... TBDIC753CBL108 Omron, C200H, 9 pin RS-422..................................................................................... TBD

COMMUNICATION CABLES FOR PLC DIRECTIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL086 KOYO PLC DL205 program port................................................................................. TBDIC753CBL103 PLC DIRECT DL-340, RJ11 headset connector RS-232............................................ TBD

COMMUNICATION CABLES FOR RELIANCEIC753CBL053 25 pin RS-232.............................................................................................................. TBD


COMMUNICATION CABLES FOR SATTCONIC753CBL089 SATTCONTOL COMLI................................................................................................ TBD


Item Status



(kg)


COMMUNICATION CABLES FOR SIEMENSIC753CBL052 9 pin RS-232................................................................................................................ TBD



IC753CBL076 SIEMENS S5 program port 15 pin............................................................................... TBDIC753CBL104 25 pin, male, current loop............................................................................................ TBDIC753CBL110 Siemens, S7-200 PPI, 9 pin RS-422........................................................................... TBD

COMMUNICATION CABLES FOR SIMATIC TIIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL092 SIMATIC TI 500 Series, 9 pin RS-422........................................................................ TBDIC753CBL100 TI 545-1102, 9 pin female RS-422.............................................................................. TBDIC753CBL101 TI 500 SERIES, 9 pin female RS-422......................................................................... TBD

COMMUNICATION CABLES FOR SQUARE DIC753CBL053 25 pin RS-232.............................................................................................................. TBD


IC753CBL094 SQUARE D Model 100 and greater, 9 pin RS-422...................................................... TBD

COMMUNICATION CABLES FOR TELEMECANIQUEIC753CBL116 Uni-Telway, Uni-Telway network, 25 pin to 8 pin male Mini-DIN................................. TBD


COMMUNICATION CABLES FOR TOSHIBAIC753CBL097 Toshiba, T2, 15 pin RS422.......................................................................................... TBD

COMMUNICATION CABLES FOR TOYOPUCIC753CBL096 4 plated wires RS-422................................................................................................. TBDIC753CBL113 Toyopuc, PC1, 3 plated wires RS-422....................................................................... TBD

PRINTER CABLESIC753CBL105 Printer cable, QuickPanel tool port to 9 pin female connector, RS-232, 10ft.............. TBD

Note: Please order PSM-PRCB00 for QuickPanel 2000 Series.

IC753CBL099 Printer cable, QuickPanel Centronix............................................................................ TBDPSM-PRCB00 Printer Cable for QuickPanel 2000 Series................................................................... TBD*


Item Status



(kg)


QUICKPANEL COVERS AND OTHER OVERLAYSIC753WSC050 Cover Sheet for 5" QP (20 pcs)................................................................................... TBDIC753WSC060 Cover Sheet for 6" QP (20 pcs)................................................................................... TBDIC753WSC090 Cover Sheet for 9" QP (10 pcs)................................................................................... 1.400IC753WSC100 Cover Sheet for 10" QP (10 pcs)................................................................................. 1.400

Note: Not compatible with 2000 series.

IC753WHC050 Hard Type Cover Sheet for 5" QP (10 pcs)................................................................. TBDIC753WHC060 Hard Type Cover Sheet for 6" QP (10 pcs)................................................................. TBDIC753WHC072 Hard Type Cover Sheet for 7" 2000 QP (5 pcs).......................................................... TBD*IC753WHC090 Hard Type Cover Sheet for 9" QP (5 pcs)................................................................... TBDIC753WHC100 Hard Type Cover Sheet for 10" QP (5 pcs)................................................................. TBD

Note: Not compatible with 2000 series. Order IC753WHC122 instead.

IC753WHC120 Hard Type Cover Sheet for 12" QP............................................................................. TBDNote: Not compatible with 2000 series. Order IC753WHC122 instead.

IC753WHC122 Hard Type Cover Sheet for 12" and 10" 2000 QP....................................................... TBD*IC753WHC0H0 Hard Type Cover Sheet for 6" Handy QP (10 pcs)...................................................... TBD


HMI-AGO-203 Anti-glare overlay for 5" display (5 pcs)....................................................................... 0.190HMI-AGO-204 Anti-glare overlay for 6" display (5 pcs)....................................................................... 0.240HMI-AGO-201 Anti-glare overlay for 9" display (5 pcs)....................................................................... 0.460HMI-AGO-202 Anti-glare overlay for 10.5" display (5 pcs).................................................................. 0.480


HMI-BEZ-201 Stainless bezel for 5" Quickpanel................................................................................ TBDHMI-BEZ-204 Stainless bezel for 6" Quickpanel................................................................................ 0.900HMI-BEZ-406 Stainless bezel for 7" 2000 Quickpanel....................................................................... TBD*HMI-BEZ-202 Stainless bezel for 9" Quickpanel................................................................................ TBDHMI-BEZ-203 Stainless bezel for 10.5" Quickpanel........................................................................... 2.120

Note: Not compatible with 2000 series. Order HMI-BEZ-403 instead.

HMI-BEZ-403 Stainless bezel for 10" 2000 Quickpanel..................................................................... TBD*HMI-BEZ-205 Stainless bezel for 12.1" Quickpanel........................................................................... 3.040

Note: Not compatible with 2000 series. Order HMI-BEZ-405 instead.

HMI-BEZ-405 Stainless bezel for 12" 2000 Quickpanel..................................................................... TBD*

Note: The touch screen is made of a tough, flexible material that can withstand many chemicals and hard use. After repeated use, the overlay may get scratched or damaged. You can protect the touch screen from abnormal use by adding a thin film over the touch screen. When the film is worn out, simply peel it off and add a new one.


Item Status



(kg)


QUICKPANEL MAINTENANCEPlease contact your GE Fanuc representative for the exact Back Light required for your QuickPanel.

IC753WBL050 Backlight for 5" QP...................................................................................................... TBDIC753WBL060 Backlight for 6" QP...................................................................................................... TBD

Note: Compatible with IC753QMS600 and IC753QSS600.

IC753WBL100 Backlight for 10" STN and Mono QP........................................................................... TBDNote: Compatible with IC753QSL000.

IC753WBL101 Backlight for 10" TFT QP............................................................................................. TBDNote: Compatible with IC753QTL001.

IC753WBL120 Backlight for 12" QP.................................................................................................... TBDNote: Compatible with IC753QTL200.

IC753WRG050 Rubber Gasket for 5" QP............................................................................................. TBDIC753WRG060 Rubber Gasket for 6" QP............................................................................................. TBDIC753WRG090 Rubber Gasket for 9" QP............................................................................................. TBDIC753WRG100 Rubber Gasket for 10" QP........................................................................................... TBD

Note: Compatible with 2000 10" and 12" QP.

IC753WRG120 Rubber Gasket for 12" QP........................................................................................... TBDNote: Not compatible with 2000 series.

IC753WFT000 QuickPanel Installation Fittings (4pcs)........................................................................ TBD

QUICKPANEL ACCESSORIESIC753WMU000 Multi-Unit E for 6" TFT (CF-Card sold separately)...................................................... TBDIC753WMU001 Multi-Unit E for 9" and 10" (CF-Card sold separately)................................................. TBDIC753WCF000 CF Card Front Maintenance Unit for Multi-Unit E........................................................ TBDIC753MVIL02 Video-Mix Unit for 12" and 10" QP 2000..................................................................... TBD

Note: Compatible with GP-PRO 6. Supported only for the IC753QTL002 and IC753QTL202.

QUICKPANEL NUMERIC AND FUNCTION KEYPADHMI-KPN-201 Numeric and Function Keypad (for 5" and 6" units only)............................................. 1.050HMI-KPN-401 Numeric and Function Keypad (for 2000 7" units only)............................................... 1.050HMI-KPN-301 Numeric and Function Keypad (for 9" units only)........................................................ TBDHMI-KPN-302 Numeric and Function Keypad (for 10" units only)...................................................... 1.865

Note: Not compatible with 10" 2000 QP. Order HMI-KNP-402 instead.

HMI-KPN-402 Numeric and Function Keypad (for 2000 10" units only)............................................. 1.050HMI-KPN-403 Numeric and Function Keypad (for 2000 12" units only)............................................. 1.050

Note: The keypad option adds external keypads from the 5" up to the 12" QuickPanel. The keypads are used in place of the touch screen or along with the touch screen. For example, instead of touching the QUICKPANEL screen to activate a Push Button, you can press an external keypad. You can also assign an external keypad to simulate a push button, selector switch, goto panel button, numeric data entry, print screen button or word button. Keypads require QuickDesigner or Machine Edition to be configured.


Item Status



(kg)


VERSAMAX DATAPANELIC200DTX200 DataPanel 20 - 6 operation keys / 2 line display (5V).................................................. 0.335

Note: Operator Interface for changing timer/counter/register values. No stored messaging. Requires IC200CBL550 cable or equivalent. No DataDesigner programming package required.

IC200DTX400 DataPanel 40 - 6 function keys / 2 line display (5V).................................................... TBDNote: Requires IC200CBL550 cable or equivalent.

IC200DTX450 DataPanel 45 - 6 function keys / 2 line display (24V).................................................. 0.390Note: Requires IC200CBL555 cable or equivalent.

IC200DTX600 DataPanel 60 - 8 function keys / 4 line display (5V).................................................... TBDNote: Requires IC200CBL550 cable or equivalent.

IC200DTX650 DataPanel 65 - 8 function keys / 4 line display (24V).................................................. 0.480Note: Requires IC200CBL555 cable or equivalent.

IC200DTX850 DataPanel 85 - 8 function keys and data entry keypad / 4 line display (24V).............. 0.500Note: Requires IC200CBL555 cable or equivalent.

Note: All VersaMax Datapanel requires DataDesigner 5.1.0 or later except the IC200DTX200.

DATAPANEL 100 SERIESIC752DFT000 DataPanel 150 - 240x64 LCD display with LED backlight. Includes integrated

keypad for data entry. Various sizes of text supported. No touch or PC/104 capability. Order new DataDesigner S/W, IC752DDZ000

1.500

Note: Use DataDesigner IC752DDZ000 to configure.

IC752SKT009 DataPanel 150 Starter Kit: Includes Datapanel 150 (DFT000), download & communication cables, DataDesigner, user & programming manuals.

2.923

Note: This unit includes: Datapanel 150 - IC752DFT000, DataDesigner software - IC752DDZ000 and Datapanel to SNP cable - IC752BCL101.

IC752DSX000 DataPanel 160 - 240x64 LCD display w/ LED backlight. Includes integrated keypad for data entry. No touch capability. Various sizes of text, bitmaps, bar graphs. Supports limited PC/104 capability. Order new DataDesigner S/W IC752DDZ000.

1.100

Note: Use DataDesigner to configure. Now includes real time trends and host comms.

IC752SKT008 DataPanel 160 Starter Kit: Includes Datapanel 160 (DSX000), download & communication cables, DataDesigner, user & programming manuals

3.024

Note: This unit includes: Datapanel 160 - IC752DSX000, DataDesigner software - IC752DDZ000 and Datapanel to SNP cable - IC752BCL101.

Note: All units powered by 9-35 VDC. All units programmed via DataDesigner software, ordered separately. Starter kits include Datapanel operator interface unit, programming cable, user manual, programming manual, SNP cable, and DataDesigner. One copy of DataDesigner required per customer location.

DATAPANEL 200 SERIESIC752BDT100 DataPanel 240E, 240x128 LCD with CCFT backlight. 6x8 Matrix Resistive touch

screen with text, bitmaps, bar graphs, real time clock. Includes PC/104 capability.1.900

Note: This unit replaces the Datapanel 240T. Use DataDesigner IC752DDZ000 to configure.

Note: All units powered by 9-35 VDC. All units programmed via DataDesigner software, ordered separately. Starter kits include Datapanel operator interface unit, programming cable, user manual, programming manual, SNP cable, and DataDesigner. One copy of DataDesigner required per customer location.


Item Status



(kg)


DATAPANEL CABLESIC752BCL000 Datapanel Download Cable......................................................................................... 1.000

Note: Cable is used to transfer configuration from a PC to the DataPanel.

IC200CBL520 Datapanel DP 20/40/60 to SNP(X) RS485-15 pin Cable............................................. TBDIC200CBL525 Datapanel DP 45/65/85 to SNP(X) RS485-15 pin Cable............................................. TBDIC752CGE201 Datapanel DP 150/160/240 to SNP 485 Cable........................................................... TBD

Note: Connects Datapanel RS485 port to Series 90 SNP port. Converter is not needed. Does not support mature Datapanel.

IC200CBL550 Datapanel DP 20/40/60 to SNP(X) RS232-RJ45 Cable.............................................. 0.130IC200CBL555 Datapanel DP 45/65/85 to SNP(X) RS232-RJ45 Cable.............................................. 0.130IC752CGE203 Datapanel DP 150/160/240 to VersaMax Nano/Micro RJ-45 RS232 Cable................ TBD*IC200CBL545 Datapanel DP 45/65/85 to SNP(X) RS232-9 pin Cable............................................... TBDIC752BCL101 Datapanel to SNP (25 pin to 15 pin)............................................................................ 1.000

Note: One DataPanel to SNP cable is supplied with each Startker Kit only -- not each DataPanel purchase. Connects Datapanel RS232 port to Series 90 SNP port. Cable includes a 232-485 converter.

IC752CGE102 Datapanel DP 45/65/85 to SNP CMM Cable............................................................... TBDIC752CGE202 Datapanel DP 150/160/240 to SNP CMM Cable......................................................... TBDIC752CGE301 Datapanel to PowerMate Cable................................................................................... TBD*IC200CBL605 Datapanel DP 45/65/85 to A/B SLC-500 RS485-RJ45 Cable..................................... TBDIC752CAB201 Datapanel DP 150/160/240 to A-B SLC500 Cable...................................................... TBD

Note: For SLC503/504 use download cable, IC752BCL001

IC200CBL625 Datapanel DP 45/65/85 to A/B SLC-500 RS232-Ch. 0 Cable..................................... TBD#IC752CAB102 Datapanel DP 45/65/85 to AB Micrologix Cable.......................................................... TBDIC752CAB202 Datapanel DP 150/160/240 to AB Micrologix Cable.................................................... TBDIC200CBL655 Datapanel DP 45/65/85 to Mitsubishi FX RS422-25 pin Cable................................... TBDIC752CMI201 Datapanel DP 150/160/240 to Mitsubishi RS422 Cable.............................................. TBDIC752CMO101 Datapanel DP 45/65/85 to Modicon 984 9-pin Cable.................................................. TBDIC752CMO201 Datapanel DP 150/160/240 to Modicon 984 9-pin Cable............................................ TBDIC752CMO102 Datapanel DP 45/65/86 to Modicon Micro RJ-45 Cable.............................................. TBDIC752CMO202 Datapanel DP 150/160/240 to Modicon Micro RJ-45 Cable........................................ TBDIC752COM101 Datapanel DP 45/65/85 to Omron 9-pin Cable............................................................ TBDIC752COM201 Datapanel DP 150/160/240 to Omron 9-pin Cable...................................................... TBDIC752COM102 Datapanel DP 45/65/85 to Omron 25-pin Cable.......................................................... TBDIC752COM202 Datapanel DP 150/160/240 to Omron 25-pin Cable.................................................... TBDIC200CBL635 Datapanel DP 45/65/85 to Siemens S7 RS485 -9 pin Cable...................................... TBDIC752CSI201 Datapanel DP 150/160/240 to Siemens S7 RS232 Cable.......................................... TBD

DATAPANEL CONFIGURATION SOFTWAREIC752DDZ000 DataDesigner Configuration Software (5.20)............................................................... 1.260

Note: This package configures DataPanels and includes the protocols, transfer tool and download cable.

Note: Only one purchased copy of Datadesigner is required per site. Configures all Datapanels. Includes Datadesigner User's Manual. Datadesigner is not included with the Datapanel hardware purchase, except for starter kits.


Item Status



(kg)


CONNECTIVITYIC752GEN100 PC/104 Genius Card................................................................................................... 0.300

Note: Genius card for use in Datapanels with PC/104 capability.

IC752PBI100 PC/104 Profibus Card.................................................................................................. 0.100Note: Profibus card for use in Datapanels with PC/104 capability.

VT 100 DATAPANELIC752DVT150 Datapanel DP 150 VT100............................................................................................ TBD

Note: VT100 firmware on DataPanel 150 allows DataPanel to be used as standard data entry terminal

IC752DVT160 Datapanel DP 160 VT100............................................................................................ TBDNote: VT100 firmware on DataPanel 160 allows DataPanel to be used as terminal includes graphic support

IC752DVT240 Datapanel DP 240E VT100......................................................................................... TBDNote: VT100 firmware on DataPanel 240 allows DataPanel with touch screen capability to be used as standard terminal

Note: VT100 firmware on DataPanel allows DataPanel to be used as terminal. No programming software needed.

DATAPANEL ACCESSORIESIC752MNL001 WinCfg User's Manual................................................................................................. 0.275

Note: GFK-1475 Covers the WinCfg configuration software.

IC752MNL002 DataPanel 100 Series Operator's Manual (GFK-1528)............................................... TBDNote: GFK-1528 Covers the hardware and operation of the Datapanel 150 and 160 models.

IC752MSC001 Datapanel Power Connector - One supplied with every Datapanel that uses this connector (Datapanel K, J+, 240, H, 150, 160)

TBD

Note: Spare Part. Power connector for the Datapanel 100 Series, 200 Series, K, J+, or H.

IC752MSC002 Mounting Clip............................................................................................................... TBDNote: Spare Part. Mounting clip for the Datapanels or Display Stations. Qty 1. Order as many as are needed. Datapanels use 6 to 8 clips. Most Display Stations use 10 clips.Necessary number of clips provided with each DataPanel purchase.

DATAPANEL FUNCTIONAL UPGRADESIC752BUU000 WinCfg & Datapanel Software Upgrade...................................................................... 0.803

Note: Upgrades both the Windows based configuration tool, WinCfg, and all Datapanel system software to the current release. Includes a WinCfg User's Manual (MNL001).


Item Status



(kg)


DATAPANEL DOCUMENTATIONGFK-1475 WinCfg Software User's Guide.................................................................................... 0.300

Note: Software for mature Datapanel

GFK-1476 Datapanel Models K, J+ and H Operator's Manual..................................................... 0.164Note: Mature Datapanel

GFK-1528 Datapanel 100 Range Operator’s Manual................................................................... TBDGFK-1571 Datapanel 200 and Datapanel 300 Series User's Manual........................................... TBDGFK-1656 Datapanel Model 240E User's Manual........................................................................ TBDGFK-1657 Datapanel 30 and 50 User's Manual........................................................................... TBD

Note: Products are not available in Europe (CE mark)

GFK-1658 DataDesigner Software User's Guide.......................................................................... TBD


Item Status

OPERATOR INTERFACES CIMPLICITY® VIEWSTATION/CONTROLSTATION CE


(kg)


CONTROLSTATION CEIC752CCS049 ControlStation CE II 6" Controller................................................................................ TBDIC752CCK049 ControlStation CE II 6" Controller with Developer Kit.................................................. TBDIC752PBMU01 Profibus Master for 6" ControlStation II....................................................................... TBDIC752CDS049 ControlStation CE IIx 10" Controller............................................................................ TBDIC752CDK049 ControlStation CE IIx 10" Controller with Developer Kit.............................................. TBDIC752PBMU11 Profibus Master for 10" ControlStation Iix................................................................... TBDIC752BBRU11 Ethernet BBSRAM Card for 10" ControlStation Iix...................................................... TBD

Note: The ControlStation CE unit is a 200 MHz SH4 Processor, 32 MB RAM, 16 MB Flash ROM, 2 Serial Ports, PS2 Keyboard & USB Ports, 24 VDC Operation. The unit includes a View & Logic PC Runtime Licence.

VIEWSTATION CEIC752VDS048 10.5" TFT Color ViewStation CE SH4......................................................................... 0.800

Note: SH4 CPU, 24VDC. Includes a View Runtime licence.

IC752VDK048 10.5" TFT Color Starter Kit ViewStation CE SH4........................................................ TBDNote: Includes IC752VDS048, IC646MEDSFT, HMI-CAB-ETH and SPS-55W

IC752VCS048 6" TFT Color ViewStation CE SH4.............................................................................. TBDNote: SH4 CPU, 24VDC. Includes a View Runtime licence.

IC752VCK048 6" TFT Color Starter Kit ViewStation CE SH4............................................................. TBDNote: Includes IC752VCS048, IC646MEDSFT, HMI-CAB-ETH and SPS-55W

Note: The ViewStation CE unit is a 200 MHz SH4 Processor, 32 MB RAM, 16 MB Flash ROM, 2 Serial Ports, PS2 Keyboard & USB Ports, 24 VDC Operation. The unit includes a View Runtime Licence.

ACCESSORIES AND CABLESIC646VSCEMK ViewStation CE Development Software...................................................................... 2.978*IC646CSCEMK ControlStation CE Development Software.................................................................. 2.978*IC753CBLETH Ethernet Cross-over cable for direct connection (2m)................................................. TBD*IC753CBL058 9 pin RS-232 (984 Slot and Compact)......................................................................... TBD



Item Status

OPERATOR INTERFACES CIMPLICITY® STATION


(kg)


CIMPLICITY StationThe Station familly is based on Windows 2000 Operating System and is bundled with CIMPLICITY® Machine Edition. Two versions of computer are available:Standard: Via 750MHz with 128 MB RAM, 13GB HD and Floppy/CD ROMAdvanced: Coppermine 900MHz with 256 MB RAM, 13GB HD and Floppy/RW-CD ROMFor other Operating System, please contact your GE Fanuc representative.

Unbundled StationIC5002TAW0000 12", 750 MHz, 128 MB, Win 2000, CD-ROM (no Software)........................................ 7.000IC5002TBW0000 12", 933 MHz, 256 MB, Win 2000, RW-CD-ROM (no Software)................................. 7.000IC5005TAW0000 15", 750 MHz, 128 MB, Win 2000, CD-ROM (no Software)........................................ 9.000IC5005TBW0000 15", 933 MHz, 256 MB, Win 2000, RW-CD-ROM (no Software)................................. 9.000IC5008TAW0000 18", 750 MHz, 128 MB, Win 2000, CD-ROM (no Software)........................................ 11.000*IC5008TBW0000 18", 933 MHz, 256 MB, Win 2000, RW-CD-ROM (no Software)................................. 11.000*

Note: Unbundled Station are coming only with Windows 2000 Operating System. No GE Fanuc software are delivered.

Station Machine Edition View & Logic PC DevelopmentIC5002TAW1000 12", 750 MHz, 128 MB, Win 2000, CD-ROM, ME Development & Runtime 8000 I/O 7.000IC5002TBW1000 12", 933 MHz, 256 MB, Win 2000, RW-CD-ROM, ME Development & Runtime

8000 I/O7.000

IC5005TAW1000 15", 750 MHz, 128 MB, Win 2000, CD-ROM, ME Development & Runtime 8000 I/O 9.000IC5005TBW1000 15", 933 MHz, 256 MB, Win 2000, RW-CD-ROM, ME Development & Runtime

8000 I/O9.000

IC5008TAW1000 18", 750 MHz, 128 MB, Win 2000, CD-ROM, ME Development & Runtime 8000 I/O 11.000*IC5008TBW1000 18", 933 MHz, 256 MB, Win 2000, RW-CD-ROM, ME Development & Runtime

8000 I/O11.000*

Note: Delivered with windows 2000 and CIMPLICITY Machine Edition View & Logic Developer PC 8000 I/O. CIMPLICITY Station can be delivered pre-installed, pre-configured and pre-licensed: ask for quotation.

Station Machine Edition View & Logic PC RuntimeIC5002TAW4000 12", 750 MHz, 128 MB, Win 2000, CD-ROM, ME Runtime 1500 I/O.......................... 7.000IC5002TBW4000 12", 933 MHz, 256 MB, Win 2000, RW-CD-ROM, ME Runtime 1500 I/O................... 7.000IC5005TAW4000 15", 750 MHz, 128 MB, Win 2000, CD-ROM, ME Runtime 1500 I/O.......................... 9.000IC5005TBW4000 15", 933 MHz, 256 MB, Win 2000, RW-CD-ROM, ME Runtime 1500 I/O................... 9.000IC5008TAW4000 18", 750 MHz, 128 MB, Win 2000, CD-ROM, ME Runtime 1500 I/O.......................... 11.000*IC5008TBW4000 18", 933 MHz, 256 MB, Win 2000, RW-CD-ROM, ME Runtime 1500 I/O................... 11.000*

Note: Delivered with windows 2000 and CIMPLICITY Machine Edition View & Logic PC Runtime 1500 I/O. CIMPLICITY Station can be delivered pre-installed, pre-configured and pre-licensed: ask for quotation.

Station Plant Edition Server Unlimited

Note: Delivered with windows 2000 and CIMPLICITY Plant Edition Server Unlimited I/O Runtime and Development.


Item Status

OPERATOR INTERFACES HORNER


(kg)


OPERATOR STATIONSHE500TIU050 Operator Station TIU050, 2x20, LCD.......................................................................... 0.503HE500TIU050-02 Operator Station TIU050, 2x20, LCD + RTC............................................................... TBDHE500TIU100 Operator Station TIU100, 8x20, LCD......................................................................... 0.700HE500TIU100-02 Operator Station TIU100, 8x20, LCD + RTC.............................................................. TBDHE500TIU101 Operator Station TIU100, 8x20, LCD + Cscan........................................................... TBDHE500TIU101-02 Operator Station TIU100, 8x20, LCD + Cscan + RTC............................................... TBDHE500TIU102 Operator Station TIU100, 8x20, LCD + Profibus........................................................ TBDHE500TIU102-02 Operator Station TIU100, 8x20, LCD + Profibus + RTC............................................ TBDHE500TIU103 Operator Station TIU100, 8x20, LCD + DeviceNet..................................................... TBDHE500TIU103-02 Operator Station TIU100, 8x20, LCD + DeviceNet + RTC......................................... TBDHE500TIU110 Operator Station TIU110, 8x20, LCD, Num Keypad................................................... TBDHE500TIU110-02 Operator Station TIU110, 8x20, LCD, Num Keypad +RTC........................................ TBDHE500TIU111 Operator Station TIU110, 8x20, LCD, Num Keypad + Cscan.................................... TBDHE500TIU111-02 Operator Station TIU110, 8x20, LCD, Num Keypad + Cscan + RTC......................... TBDHE500TIU112 Operator Station TIU110, 8x20, LCD, Num Keypad + Profibus................................. TBDHE500TIU112-02 Operator Station TIU110, 8x20, LCD, Num Keypad + Profibus + RTC...................... TBDHE500TIU113 Operator Station TIU110, 8x20, LCD, Num Keypad + DeviceNet.............................. TBDHE500TIU113-02 Operator Station TIU110, 8x20, LCD, Num Keypad + DeviceNet + RTC.................. TBDHE500TIU200 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad............................ TBDHE500TIU201 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad + Cscan............. TBDHE500TIU202 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad + Profibus.......... TBDHE500TIU203 Operator Station TIU200, 16x40, LCD/Graph, Num/Funct Keypad + DeviceNet....... TBDHE500TSW232 Operator Station Development Kit (Software for TIUxxx on CD-ROM, RS232-

Programming cable, Software and Hardware Documentation) Operator Station Development Kit (Software for TIUxxx on CD-ROM, RS232-Programming cable, Software and Hardware Documentation)

1.301

Note: Includes Cbreeze TIU programming software, one download cable HE500CBL232 and documentation

Note: All TIU units include the Operator Station Programming Software (Cbreeze). All units powered by 9-35 VDC. The program download cable is included in the Operator Station Development kit or can be ordered as HE500CBL232.RTC is for Real Time Clock.


Item Status



(kg)


OPERATOR STATIONS CABLESHE500CBL222 Program download cable PC to TIUxxx Operator Stations......................................... 0.156HE500CBL001 GE Fanuc Series 90-30/70 to TIU100/110 cable......................................................... 0.229

Note: Except IC697CPU731 & IC697CPU771

HE500CBL044 GE Fanuc Series 90-30/70 to TIU cable (except 100/110).......................................... 0.220Note: Except IC6967CPU731 & IC6967CPU771

HE500CBL002 AB MicroLogic to TIU100/110 cable............................................................................ TBDHE500CBL034 AB MicroLogic to TIU cable (except 100/110)............................................................. TBDHE500CBL004 AB PLC5 to TIU100/110 cable.................................................................................... TBDHE500CBL036 AB PLC5 to TIU cable (except 100/110)..................................................................... TBDHE500CBL003 AB SLC500 to TIU100/110 cable................................................................................ TBDHE500CBL035 AB SLC500 to TIU cable (except 100/110)................................................................. TBDHE500CBL006 DANFOSS - VLT5000 DRIVE to TIU100/110 cable.................................................... TBDHE500CBL042 DANFOSS - VLT5000 DRIVE to TIU cable (except 100/110)..................................... TBDHE500CBL005 HITACHI H200/300/700/2000 to TIU100/110 cable................................................... TBDHE500CBL037 HITACHI H200/300/700/2000 to TIU cable (except 100/110)..................................... TBDHE500CBL009 HITACHI EH150 to TIU100/110 cable......................................................................... TBDHE500CBL041 HITACHI EH150 to TIU cable (except 100/110).......................................................... TBDHE500CBL008 IDEC Micro to TIU100/110 cable................................................................................. TBDHE500CBL040 IDEC Micro to TIU cable (except 100/110).................................................................. TBDHE500CBL007 Mitsubishi FX Series to TIU100/110 cable.................................................................. TBDHE500CBL039 Mitsubishi FX Series to TIU cable (except 100/110)................................................... TBD


Item Status



(kg)


OPERATOR INTERFACEHE693TCR050 Data Access Unit......................................................................................................... 0.709HE693FLT050 Series 90 Fault Table OIU........................................................................................... 0.638HE693OIU057 Mini OIU, LCD Display................................................................................................. 0.893HE693OIU057-01 Mini OIU, LCD Display, 24VDC................................................................................... 0.900

Note: Replaces HE693OIU057-24

HE693OIU057-04 Mini OIU, LCD Display, 5VDC, Realtime Clock........................................................... 0.850Note: Replaces HE693OIU057-CLK

HE693OIU157 OIU, LCD Display with Function Keys, Flash Memory................................................ 1.262HE693OIU157-01 OIU, LCD Display with Function Keys, Flash Memory, 24VDC................................... 1.250


HE693OIU177 OIU, VF Display with Function Keys, Flash Memory, 24VDC..................................... 1.262HE693OIU277 OIU, 4-line VF Display with 14 Function Keys, SNP, 24VDC...................................... 1.375HE693OIU297 OIU, 4-line VF Display with 14 Function keys, Genius I/F, 24VDC............................. 1.531HE693OIU327 OIU, VF Display with Function Keys, 80-260VAC....................................................... 2.387HE693OIU327-01 OIU, VF Display with Function Keys, 24VDC.............................................................. 2.350


HE693OIU327-03 OIU, VF Display with Function Keys, European Chars., 24VDC................................. 2.250Note: Replaces HE693OIU327-24E

HE693OIU357 OIU, VF Display with Function Keys and LED's, 80-260VAC...................................... 2.410HE693OIU357-01 OIU, VF Display with Function Keys and LED's, 24VDC............................................. 2.300


HE693OIU357-02 OIU, VF Display with Function Keys and LED's, European Chars., 80-260VAC........ TBDNote: Replaces HE693OIU357-E

HE693OIU357-03 OIU, VF Display with Function Keys and LED's, European Chars., 24VDC............... 1.430Note: Replaces HE693OIU357-24E

HE693OIU907 OIU, VF Display with Function Keys, Genius I/F, 80-260VAC..................................... 2.920HE693OIU907-01 OIU, VF Display with Function Keys, Genius I/F, 24VDC............................................ TBD


HE693OIU907-03 OIU, VF Display with Function Keys, Genius I/F, European Chars., 24VDC............. TBDNote: Replaces HE693OIU907-24E

HE693CBL150 OIU to S90 CPU Communications Cable (1.5m)......................................................... 0.198HE693CBL250 OIU to S90 CPU Communications Cable (1.5m)......................................................... 0.339HE693OSW057 Programming Software Package for OIUxx7 with Cable............................................. 0.339

Note: The Release 3.0 OIUs are recommended for all new customer sales, they include increased functionality at the same list price. Release 3.0 OIUs include all features of Release 2.0 OIUs, plus: metal cover included standard, double integer support, floating point scaling, enhanced function keys, enhanced trigger register, and more.


Item Status

MOTION CONTROLLERS


(kg)


MOTION MATE DSM300 MOTION CONTROLLERIC693DSM302 Motion Mate DSM302 (2 Axis basic feature set)......................................................... 0.400

Note: The Motion Mate DSM302 Motion Controller can control 1 or 2 axis. It uses a high density 37 pin connector and with ACC and CBL below provides a simple connection to extermal I/Os and the servo amplifier. The following manual is recommended for the DSM300: GFK-1464LogicMaster version 8.02 or above is required to configure the DSM302. A CPU with firmware version 6.5 or above is required in the host Series 90-30 PLC.

IC693DSM314 Motion Mate DSM314 (4 Axis advanced feature set).................................................. 0.400Note: The Motion Mate DSM314 Motion Controller can control 1 to 4 axis (max. 2 digital / max. 4 analog). It uses a high density 37 pin connector and with ACC and CBL below provides a simple connection to extermal I/Os and the servo amplifier. The following manual is recommended for the DSM314: GFK-1742 The DSM314 Requires CPU Release 10.0 Firmware or higher. CPU350, 352, 360, 363 and 364 support the release 10 upgrade. VersaPro version 1.1 is required for programming and configuration. The DSM314 is not compatible with LM90, Control or the DOS-based Motion Programmer (IC641SWP065)



IC693ACC335 Axis Terminal Board.................................................................................................... 0.120Note: This terminal board (DIN Rail compatible) allows convenient connection of I/Os (over-travel, home, strobe, analogue out, CTL10/12 outputs) and the servo amplifier through IC800CBL001/002. One per axis required.

IC693ACC336 Auxiliary Terminal Board............................................................................................. 0.120Note: This terminal board (DIN-Rail compatible) allows convenient connection of auxiliary I/Os (follower master encoder on connector C, and future I/O expansion). This terminal board is also used when connecting analogue axis to the DSM302/314. One per axis required.

IC800CBL001 Servo Command Cable 1m......................................................................................... 0.220Note: This cable is used between the ACC335/336 and the servo amplifier, or directly from the DSM to the servo amplifier when no external I/Os are required. One per axis required

IC800CBL002 Servo Command Cable 3m......................................................................................... 0.220Note: This cable is used between the ACC335/336 and the servo amplifier, or directly from the DSM to the servo amplifier when no external I/Os are required. One per axis required

IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable can also be used on the CPU351/352 as well as on the Ethernet interface. When using DSM314, this cable is only required for flash firmware upgrades.

Note: The Motion Mate DSM300 modules interface digitally with the drive packages from GE Fanuc. See the Beta Servo (PWM) and the Alpha Servo (PWM) sections of this ordering guide to select the drive packages. The DSM300 can also interface with servo drives using an analog +/- 10V connection (DSM302 from firmware version 1.4; DSM314 from 1st release).


Item Status

MOTION CONTROLLERS


(kg)


MOTION MATE APM300 MOTION CONTROLLERSIC693APU301 Motion Mate APM300 (1 Axis) (Requires 1x or 2xCBL311 or ACC316-8).................. 0.317

Note: The following manuals are recommended for the APM300: GFK-0781, GFK-0840

IC693APU302 Motion Mate APM300 (2 Axis) (Requires 1x or 2xCBL311 or ACC316-8).................. 0.340Note: The following manuals are recommended for the APM300: GFK-0781, GFK-0840

IC693CBL311 Cable (3m) with 25-pin 'D'-Type End, APM/MCS300.................................................. 0.454Note: The above cable connects the I/O of the APM300 to a DIN Rail terminal block.

IC693ACC316 Connector, Qty 10, Solder Eyelet Type (for MDL654/5, MDL752/3 and APM)........... 0.250Note: Includes D-connectors, backshells, crimp pins, and hardware necessary to fabricate (10) single-ended cables. Additional tools will be required for crimp and ribbon kits.

Note: The Motion Mate APM300 modules interface with the servo drives using an analog +/- 10V connection.

STEPPER MOTION CONTROLLERSHE693STP100 Stepper Positioning Module (1 Axis)........................................................................... 0.723HE693STP101 Stepper Positioning Module (1 Axis), Optical Isolation................................................ 0.737HE693STP110 Stepper Positioning Module, Incremental Encoder Feedback (1 Axis)....................... 0.680HE693STP111 Stepper Positioning Module, Incremental Encoder Feedback (1 Axis), Optical

Isolation0.737


Isolation0.624

HIGH SPEED COUNTER AND I/O PROCESSORIC693APU300 High Speed Counter, 80 KHz...................................................................................... 0.346

Note: The following manual is recommended for the Series 90™-30 High-Speed Counter: GFK-0293

IC693APU305 I/O Processor Module.................................................................................................. 0.363Note: The following manual is recommended for the Series 90™-30 I/O processor: GFK-1028

OCS MOTION (STEPPER)IC300STP100 Stepper Indexer: Single Axis, supports Pulse Train output and Quadrature or

Up/Down inputTBD


Item Status

MOTION CONTROLLERS


(kg)


MANUALSGFK-1464 Motion Mate DSM300 User's Manual.......................................................................... 0.650GFK-1742 Motion Mate DSM314 User's Manual.......................................................................... TBD*GFK-0840 Motion Mate APM300 Standard Mode User's Manual................................................ 0.390GFK-0781 Motion Mate APM300 Follower Mode User's Manual.................................................. 0.369GFK-0840A-FR Motion Mate APM300 Standard Mode User's Manual - French.................................. 0.403GFK-0664A-GE Motion Mate APM/DSM/MCS 300 Programmer's Manual - German......................... 0.338GFK-0664 Motion Mate APM/DSM/MCS 300 Programmer's Manual.......................................... 0.338GFK-0293 Series 90-30 High Speed Counter User's Manual....................................................... TBDGFK-0293B-FR Series 90-30 High Speed Counter User's Manual - French........................................ TBDGFK-0293C-GE Series 90-30 High Speed Counter User's Manual - German...................................... 0.200GFK-1028 Series 90-30 I/O Processor Module User's Manual - English..................................... 0.077IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095


IC693LBR301 Series 90-30 Paper Manuals Library........................................................................... 14.492

Note: A complete set of English manuals (paper or CD-ROM) for the Series 90™-30 modules is delivered with the LogicMaster™ 90-30 English programming software. The manuals, CD or set of manuals above should be ordered if you need additional paper copies to those distributed with the libraries.


Item Status

BETA SERIES SERVO SYSTEM


(kg)


BETA SERVO MOTORS PACKAGESPM200SVS000 B-SVU-12 PWM, B Servo Motor (0.5Nm, 3000 rpm, 0.2kW)...................................... 2.950

Note: Add connector kits or cable kits type: Beta 0.5

PM200SVS005 B-SVU-12 PWM, B Servo Motor (0.5Nm, 3000 rpm, 0.2kW, Brake 0.65 Nm)............ 2.040Note: Add connector kits or cable kits type: Beta 0.5

PM200SVS010 B-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW)......................................... 4.700Note: Add connector kits or cable kits type: Beta 1 - 6

PM200SVS015 B-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW, Brake 2Nm)..................... 3.540Note: Add connector kits or cable kits type: Beta 1 - 6







Note: The following library is recommended for the packages above: PM100LBR001Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda connector for the Emergency Stop signal.Beta motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.

ALPHA C SERVO MOTORS PACKAGESPM202SVS120 B-SVU-20 PWM, A C Servo Motor (12Nm, 2000 rpm, 1.0 kW)................................... 22.900

Note: Add connector kits or cable kits type: M

PM202SVS125 B-SVU-20 PWM, A C Servo Motor (12Nm, 2000 rpm, 1.0 kW, Brake 35Nm)............. 19.140Note: Add connector kits or cable kits type: M

PM202SVS220 B-SVU-40 PWM, A C Servo Motor (22Nm, 1500 rpm, 1.5 kW)................................... 32.970Note: Add connector kits or cable kits type: M

PM202SVS225 B-SVU-40 PWM, A C Servo Motor (22Nm, 1500 rpm, 1.5 kW, Brake 35Nm)............. 32.970Note: Add connector kits or cable kits type: M

Note: The following library is recommended for the packages above: PM100LBR001Servo Packages above contain one servo motor, its matching servo amplifier, AMP power connector kit and one Honda connector for the Emergency Stop signal.Alpha motors are IP65, straight shaft and are fitted with an absolute serial pulse coder.Add to the above package as required connector kits or cable kits, filters, surge absorbers, regenerative resistor, etc.


Item Status



(kg)


ALPHA SERVO MOTORS PACKAGESPM201SVS010 B-SVU-12 PWM, A Servo Motor (1Nm, 3000 rpm, 0.3kW)......................................... 4.040

Note: Add connector kits or cable kits type: ALPHA 1-2

PM201SVS015 B-SVU-12 PWM, A Servo Motor (1Nm, 3000, 0.3kW, Brake 2 Nm)........................... 4.040Note: Add connector kits or cable kits type: ALPHA 1-2

PM201SVS020 B-SVU-12 PWM, A Servo Motor (2Nm, 3000 rpm, 0.5.kW)........................................ 5.040Note: Add connector kits or cable kits type: ALPHA 1-2

PM201SVS025 B-SVU-12 PWM, A Servo Motor (2Nm, 3000 rpm, 0.5kW, Brake 2 Nm).................... 5.040Note: Add connector kits or cable kits type: ALPHA 1-2

PM201SVS030 B-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9.kW)........................................ 11.970Note: Add connector kits or cable kits type: S

PM201SVS035 B-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9kW, Brake 8 Nm).................... 12.000Note: Add connector kits or cable kits type: S

PM201SVS060 B-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4.kW)........................................ 16.970Note: Add connector kits or cable kits type: S

PM201SVS065 B-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4 kW, Brake 8 Nm)................... TBDNote: Add connector kits or cable kits type: S

PM201SVS120 B-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8.kW)...................................... 21.980Note: Add connector kits or cable kits type: M

PM201SVS125 B-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8 kW, Brake 35 Nm)............... 21.970Note: Add connector kits or cable kits type: M

PM201SVS221 B-SVU-80 PWM, A Servo Motor (22Nm, 2000 rpm, 3.8 kW)...................................... 32.970Note: Add connector kits or cable kits type: M

PM201SVS226 B-SVU-80 PWM, A Servo Motor (22Nm, 2000 rpm, 3.8 kW, Brake 35 Nm)............... 32.970Note: Add connector kits or cable kits type: M



Item Status



(kg)


ALPHA M SERVO MOTORS PACKAGESPM203SVS020 B-SVU-20 PWM, A M Servo Motor (2Nm, 3000 rpm, 0.7 kW).................................... 5.140

Note: Add connector kits or cable kits type: Alpha 1-2

PM203SVS025 B-SVU-20 PWM, A M Servo Motor (2Nm, 3000 rpm, 0.7 kW, Brake 2Nm)................ 5.140Note: Add connector kits or cable kits type: Alpha 1-2

PM203SVS090 B-SVU-80 PWM, A M Servo Motor (9Nm, 3000 rpm, 1.8 kW).................................... 15.970Note: Add connector kits or cable kits type: S

PM203SVS095 B-SVU-80 PWM, A M Servo Motor (9Nm, 3000 rpm, 1.8 kW, Brake 8Nm)................ 15.970Note: Add connector kits or cable kits type: S


ALPHA L SERVO MOTORS PACKAGESPM204SVS060 B-SVU-80 PWM, A L Servo Motor (6Nm, 3000 rpm, 1.4 kW)..................................... 14.970

Note: Add connector kits or cable kits type: S

PM204SVS090 B-SVU-80 PWM, A L Servo Motor (9Nm, 3000 rpm, 2.0 kW)..................................... 20.970Note: Add connector kits or cable kits type: S


CONNECTOR KITS FOR SERVO MOTORS (STRAIGHT)PM100ACC201 Connector Kit for Beta 0.5 Motor on SVU Straight...................................................... 0.015PM100ACC202 Connector Kit for Beta Motor on SVU Straight............................................................ 0.277PM100ACC203 Connector Kit for Alpha 1/2 Motor on SVU Straight.................................................... 0.160PM100ACC204 Connector Kit for Alpha Type S Motor on SVU Straight.............................................. 0.365PM100ACC205 Connector Kit for Alpha Type M Motor on SVU Straight............................................. 0.348PM100ACC252 Connector Kit for Beta Motor on SVU Straight + Brake............................................... 0.577PM100ACC254 Connector Kit for Alpha Type S Motor on SVU Straight + Brake................................ 0.665PM100ACC255 Connector Kit for Alpha Type M Motor on SVU Straight + Brake................................ 0.648

Note: Connector Kits for Servo Motors without brake contain one power connector for the servo motor, one serial pulse coder connector for the motor and one Hirose 15 pins connector for the serial pulse coder signal on the amplifier.Connector Kits for Servo Motors with brake contain the same connectors as previously listed plus one connector for brake at the motor side.

CONNECTOR KITS FOR SERVO MOTORS (ELBOW)PM100ACC302 Connector Kit for Beta Motor on SVU Elbow............................................................... 0.670PM100ACC304 Connector Kit for Alpha Type S Motor on SVU Elbow................................................. 0.500PM100ACC305 Connector Kit for Alpha Type M Motor on SVU Elbow................................................ 0.400PM100ACC352 Connector Kit for Beta Motor on SVU Elbow + Brake................................................. 0.200PM100ACC354 Connector Kit for Alpha Type S Motor on SVU Elbow + Brake................................... 0.500PM100ACC355 Connector Kit for Alpha Type M Motor on SVU Elbow + Brake................................... 0.450



Item Status



(kg)


CABLE KITS FOR POWER / ENCODER (BETA SVU 12/20) STRAIGHTPM200CBS103 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 3m Straight.................................................. 1.000PM200CBS105 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 5m Straight.................................................. TBDPM200CBS107 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 7m Straight.................................................. TBDPM200CBS110 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 10m Straight................................................ 2.800PM200CBS114 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 14m Straight................................................ TBDPM200CBS118 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 18m Straight................................................ 5.251PM200CBS122 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 22m Straight................................................ TBDPM200CBS127 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 27m Straight................................................ TBDPM200CBS130 Cable Kit Beta 0.5 Motor / ß-SVU 12/20 30m Straight................................................ TBDPM200CBS203 Cable Kit Beta 1-6 / ß-SVU 12/20 3m Straight............................................................ 0.900PM200CBS205 Cable Kit Beta 1-6 / ß-SVU 12/20 5m Straight............................................................ 1.500PM200CBS207 Cable Kit Beta 1-6 / ß-SVU 12/20 7m Straight............................................................ TBDPM200CBS210 Cable Kit Beta 1-6 / ß-SVU 12/20 10m Straight.......................................................... 3.150PM200CBS214 Cable Kit Beta 1-6 / ß-SVU 12/20 14m Straight.......................................................... TBDPM200CBS218 Cable Kit Beta 1-6 / ß-SVU 12/20 18m Straight.......................................................... 5.900PM200CBS222 Cable Kit Beta 1-6 / ß-SVU 12/20 22m Straight.......................................................... TBDPM200CBS227 Cable Kit Beta 1-6 / ß-SVU 12/20 27m Straight.......................................................... TBDPM200CBS230 Cable Kit Beta 1-6 / ß-SVU 12/20 30m Straight.......................................................... 10.150PM200CBS303 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 3m Straight................................................ TBDPM200CBS305 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 5m Straight................................................ TBDPM200CBS307 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 7m Straight................................................ TBDPM200CBS310 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 10m Straight.............................................. TBDPM200CBS314 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 14m Straight.............................................. TBDPM200CBS318 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 18m Straight.............................................. TBDPM200CBS322 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 22m Straight.............................................. TBDPM200CBS327 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 27m Straight.............................................. TBDPM200CBS330 Cable Kit Alpha 1/2 Motor / ß-SVU 12/20 30m Straight.............................................. TBDPM200CBS403 Cable Kit Alpha Motor Type S / ß-SVU 12/20 3m Straight.......................................... 1.194PM200CBS405 Cable Kit Alpha Motor Type S / ß-SVU 12/20 5m Straight.......................................... TBDPM200CBS407 Cable Kit Alpha Motor Type S / ß-SVU 12/20 7m Straight.......................................... TBDPM200CBS410 Cable Kit Alpha Motor Type S / ß-SVU 12/20 10m Straight........................................ TBDPM200CBS414 Cable Kit Alpha Motor Type S / ß-SVU 12/20 14m Straight........................................ TBDPM200CBS418 Cable Kit Alpha Motor Type S / ß-SVU 12/20 18m Straight........................................ TBDPM200CBS422 Cable Kit Alpha Motor Type S / ß-SVU 12/20 22m Straight........................................ TBDPM200CBS427 Cable Kit Alpha Motor Type S / ß-SVU 12/20 27m Straight........................................ TBDPM200CBS430 Cable Kit Alpha Motor Type S / ß-SVU 12/20 30m Straight........................................ TBDPM200CBS503 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 3m Straight.......................................... 1.600PM200CBS505 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 5m Straight.......................................... TBDPM200CBS507 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 7m Straight.......................................... 2.350PM200CBS510 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 10m Straight........................................ TBDPM200CBS514 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 14m Straight........................................ TBDPM200CBS518 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 18m Straight........................................ TBDPM200CBS522 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 22m Straight........................................ TBDPM200CBS527 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 27m Straight........................................ TBDPM200CBS530 Cable Kit Alpha Motor Type M/ ß-SVU 12/20 30m Straight........................................ TBD

Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal, both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m, 27m and 30m. For other lengths, contact GE Fanuc or its representative. Except for Beta 0,5 and Alpha 1/2, when a brake is fitted on the motor, add a brake cable (see under "Cables for Brake").


Item Status



(kg)


CABLE KITS FÜR POWER / ENCODER (BETA SVU 12/20) ELBOWPM200CBE203 Cable Kit Beta 1-6 / ß-SVU 12/20 3m Elbow............................................................... 1.750PM200CBE205 Cable Kit Beta 1-6 / ß-SVU 12/20 5m Elbow............................................................... 1.060PM200CBE207 Cable Kit Beta 1-6 / ß-SVU 12/20 7m Elbow............................................................... TBDPM200CBE210 Cable Kit Beta 1-6 / ß-SVU 12/20 10m Elbow............................................................. 2.000PM200CBE214 Cable Kit Beta 1-6 / ß-SVU 12/20 14m Elbow............................................................. 3.850PM200CBE218 Cable Kit Beta 1-6 / ß-SVU 12/20 18m Elbow............................................................. TBDPM200CBE222 Cable Kit Beta 1-6 / ß-SVU 12/20 22m Elbow............................................................. 8.000PM200CBE227 Cable Kit Beta 1-6 / ß-SVU 12/20 27m Elbow............................................................. TBDPM200CBE230 Cable Kit Beta 1-6 / ß-SVU 12/20 30m Elbow............................................................. 9.790PM200CBE403 Cable Kit Alpha Motor Type S / ß-SVU 12/20 3m Elbow............................................. 1.510PM200CBE405 Cable Kit Alpha Motor Type S / ß-SVU 12/20 5m Elbow............................................. 1.835PM200CBE407 Cable Kit Alpha Motor Type S / ß-SVU 12/20 7m Elbow............................................. 2.390PM200CBE410 Cable Kit Alpha Motor Type S / ß-SVU 12/20 10m Elbow........................................... 3.307PM200CBE414 Cable Kit Alpha Motor Type S / ß-SVU 12/20 14m Elbow........................................... TBDPM200CBE418 Cable Kit Alpha Motor Type S / ß-SVU 12/20 18m Elbow........................................... TBDPM200CBE422 Cable Kit Alpha Motor Type S / ß-SVU 12/20 22m Elbow........................................... TBDPM200CBE427 Cable Kit Alpha Motor Type S / ß-SVU 12/20 27m Elbow........................................... TBDPM200CBE430 Cable Kit Alpha Motor Type S / ß-SVU 12/20 30m Elbow........................................... TBDPM200CBE503 Cable Kit Alpha Motor Type M / ß-SVU 12/20 3m Elbow............................................ TBDPM200CBE505 Cable Kit Alpha Motor Type M / ß-SVU 12/20 5m Elbow............................................ TBDPM200CBE507 Cable Kit Alpha Motor Type M / ß-SVU 12/20 7m Elbow............................................ TBDPM200CBE510 Cable Kit Alpha Motor Type M / ß-SVU 12/20 10m Elbow.......................................... TBDPM200CBE514 Cable Kit Alpha Motor Type M / ß-SVU 12/20 14m Elbow.......................................... 4.100PM200CBE518 Cable Kit Alpha Motor Type M / ß-SVU 12/20 18m Elbow.......................................... TBDPM200CBE522 Cable Kit Alpha Motor Type M / ß-SVU 12/20 22m Elbow.......................................... TBDPM200CBE527 Cable Kit Alpha Motor Type M / ß-SVU 12/20 27m Elbow.......................................... TBDPM200CBE530 Cable Kit Alpha Motor Type M / ß-SVU 12/20 30m Elbow.......................................... TBD


CABLE KITS FOR POWER / ENCODER (BETA SVU 40/80) STRAIGHTPM200CBS703 Cable Kit Alpha Motor Type S / ß-SVU 40/80 3m Straight.......................................... TBDPM200CBS705 Cable Kit Alpha Motor Type S / ß-SVU 40/80 5m Straight.......................................... TBDPM200CBS707 Cable Kit Alpha Motor Type S / ß-SVU 40/80 7m Straight.......................................... TBDPM200CBS710 Cable Kit Alpha Motor Type S / ß-SVU 40/80 10m Straight........................................ TBDPM200CBS714 Cable Kit Alpha Motor Type S / ß-SVU 40/80 14m Straight........................................ TBDPM200CBS718 Cable Kit Alpha Motor Type S / ß-SVU 40/80 18m Straight........................................ TBDPM200CBS722 Cable Kit Alpha Motor Type S / ß-SVU 40/80 22m Straight........................................ TBDPM200CBS727 Cable Kit Alpha Motor Type S / ß-SVU 40/80 27m Straight........................................ TBDPM200CBS730 Cable Kit Alpha Motor Type S / ß-SVU 40/80 30m Straight........................................ TBDPM200CBS803 Cable Kit Alpha Motor Type M / ß-SVU 40/80 3m Straight......................................... TBDPM200CBS805 Cable Kit Alpha Motor Type M / ß-SVU 40/80 5m Straight......................................... TBDPM200CBS807 Cable Kit Alpha Motor Type M / ß-SVU 40/80 7m Straight......................................... TBDPM200CBS810 Cable Kit Alpha Motor Type M / ß-SVU 40/80 10m Straight....................................... TBDPM200CBS814 Cable Kit Alpha Motor Type M / ß-SVU 40/80 14m Straight....................................... TBDPM200CBS818 Cable Kit Alpha Motor Type M / ß-SVU 40/80 18m Straight....................................... TBDPM200CBS822 Cable Kit Alpha Motor Type M / ß-SVU 40/80 22m Straight....................................... TBDPM200CBS827 Cable Kit Alpha Motor Type M / ß-SVU 40/80 27m Straight....................................... TBDPM200CBS830 Cable Kit Alpha Motor Type M / ß-SVU 40/80 30m Straight....................................... TBD



Item Status



(kg)


CABLE KITS FOR POWER / ENCODER (BETA SVU 40/80) ELBOWPM200CBE703 Cable Kit Alpha Motor Type S / ß-SVU 40/80 3m Elbow............................................. TBDPM200CBE705 Cable Kit Alpha Motor Type S / ß-SVU 40/80 5m Elbow............................................. TBDPM200CBE707 Cable Kit Alpha Motor Type S / ß-SVU 40/80 7m Elbow............................................. TBDPM200CBE710 Cable Kit Alpha Motor Type S / ß-SVU 40/80 10m Elbow........................................... TBDPM200CBE714 Cable Kit Alpha Motor Type S / ß-SVU 40/80 14m Elbow........................................... TBDPM200CBE718 Cable Kit Alpha Motor Type S / ß-SVU 40/80 18m Elbow........................................... TBDPM200CBE722 Cable Kit Alpha Motor Type S / ß-SVU 40/80 22m Elbow........................................... TBDPM200CBE727 Cable Kit Alpha Motor Type S / ß-SVU 40/80 27m Elbow........................................... TBDPM200CBE730 Cable Kit Alpha Motor Type S / ß-SVU 40/80 30m Elbow........................................... TBDPM200CBE803 Cable Kit Alpha Motor Type M / ß-SVU 40/80 3m Elbow............................................ 1.800PM200CBE805 Cable Kit Alpha Motor Type M / ß-SVU 40/80 5m Elbow............................................ 2.650PM200CBE807 Cable Kit Alpha Motor Type M / ß-SVU 40/80 7m Elbow............................................ TBDPM200CBE810 Cable Kit Alpha Motor Type M / ß-SVU 40/80 10m Elbow.......................................... TBDPM200CBE814 Cable Kit Alpha Motor Type M / ß-SVU 40/80 14m Elbow.......................................... 6.250PM200CBE818 Cable Kit Alpha Motor Type M / ß-SVU 40/80 18m Elbow.......................................... TBDPM200CBE822 Cable Kit Alpha Motor Type M / ß-SVU 40/80 22m Elbow.......................................... TBDPM200CBE827 Cable Kit Alpha Motor Type M / ß-SVU 40/80 27m Elbow.......................................... TBDPM200CBE830 Cable Kit Alpha Motor Type M / ß-SVU 40/80 30m Elbow.......................................... TBD


CABLES FOR BRAKEPM200CBS003 Cable Brake 90 VDC / Fan, Type S, M & L 3m Straight............................................. 0.200PM200CBS005 Cable Brake 90 VDC / Fan, Type S, M & L 5m Straight............................................. 0.300PM200CBS007 Cable Brake 90 VDC / Fan, Type S, M & L 7m Straight............................................. TBDPM200CBS010 Cable Brake 90 VDC / Fan, Type S, M & L 10m Straight........................................... 0.750PM200CBS014 Cable Brake 90 VDC / Fan, Type S, M & L 14m Straight........................................... TBDPM200CBS018 Cable Brake 90 VDC / Fan, Type S, M & L 18m Straight........................................... TBDPM200CBS022 Cable Brake 90 VDC / Fan, Type S, M & L 22m Straight........................................... TBDPM200CBS027 Cable Brake 90 VDC / Fan, Type S, M & L 27m Straight........................................... TBDPM200CBS030 Cable Brake 90 VDC / Fan, Type S, M & L 30m Straight........................................... TBDPM200CBE003 Cable Brake 90 VDC / Fan, Type S, M & L 3m Elbow............................................... 0.281PM200CBE005 Cable Brake 90 VDC / Fan, Type S, M & L 5m Elbow............................................... 0.413PM200CBE007 Cable Brake 90 VDC / Fan, Type S, M & L 7m Elbow............................................... 0.657PM200CBE010 Cable Brake 90 VDC / Fan, Type S, M & L 10m Elbow............................................. 0.767PM200CBE014 Cable Brake 90 VDC / Fan, Type S, M & L 14m Elbow............................................. 1.050PM200CBE018 Cable Brake 90 VDC / Fan, Type S, M & L 18m Elbow............................................. 1.300PM200CBE022 Cable Brake 90 VDC / Fan, Type S, M & L 22m Elbow............................................. 1.800PM200CBE027 Cable Brake 90 VDC / Fan, Type S, M & L 27m Elbow............................................. TBDPM200CBE030 Cable Brake 90 VDC / Fan, Type S, M & L 30m Elbow............................................. TBD

Note: Brake cable has a connector only at the motor side. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m, 27m and 30m. For other lengths, contact GE Fanuc or its representative.

REGENERATIVE RESISTOR FOR BETA SVU 12/20PM200RDR020 ß-SVU 12/20 Regenerative Discharge Resistor 20W.................................................. 0.100PM200RDR100 ß-SVU 12/20 Regenerative Discharge Resistor 100W................................................ 0.550

Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to B-65232EN (Beta Servo Amplifiers and Motors Description) for more information.


Item Status



(kg)


REGENERATIVE RESISTOR FOR BETA SVU 40/80PM200RDR200 ß-SVU 40/80 Regenerative Discharge Resistor 200-600W........................................ 2.400PM200RDR800 ß-SVU 40/80 Regenerative Discharge Resistor 800W................................................ 5.000PM200RDR1200 ß-SVU 40/80 Regenerative Discharge Resistor 1200W.............................................. TBD

Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to B-65232EN (Beta Servo Amplifiers and Motors Description) for more information. A 70W Resistor is already built in the BETA 40/80 Amplifier.

BATTERIES FOR ABSOLUTE ENCODERSPM200BAT100 Absolute Encoder Battery + Battery Cover (snap-on)................................................. 0.050

Note: The battery is required when the position information needs to be followed when the motion controller is turned off. The serial pulse coder will behave in this case as an ABSOLUTE encoder. One battery per amplifier and per axis is required.

PM200BAT101 Absolute Encoder Battery + Battery Box (separate unit) + Cables.............................. 0.020Note: The battery is required when the position information needs to be followed when the motion controller is turned off. The serial pulse coder will behave in this case as an ABSOLUTE encoder. One battery unit can drive up to 4 amplifiers/axis.

ACCESSORIESPM200ACC100 Fuses for 24VDC PS of ß-SVU (Spare Qty 5)............................................................. 0.150PM200ACC101 AMP Connector Kit for ß-SVU 12/20 (Spare Qty 5).................................................... 0.530PM200ACC102 AMP Connector Kit for ß-SVU 40/80 (Spare Qty 5).................................................... 0.400PM200FAN001 Fan Unit for Beta 40/80 Amplifier................................................................................ 0.700PM100ACC102 Honda PCR20 Connectors Crimp (Spare Qty 5)......................................................... 0.250PM100ACC103 Honda PCR20 Connectors Solder (Spare Qty 5)........................................................ 0.400PM100ACC104 Hirose 15 Pin Connectors Solder (Spare Qty 5).......................................................... 0.100

TRANSFORMERS AND LINE FILTERSPM100LFT054 Line Filter, 200-230VAC Input Voltage (+10/-15%) PSMR-3, 5.4kW.......................... 0.600PM100LFT105 Line Filter, 200-230VAC Input Voltage (+10/-15%) PSMR-5.5, 10.5kW..................... 3.400PM100LFT230 Line Filter, 200-230VAC Input Voltage (+10/-15%) C, 23kW...................................... 3.162PM100LSA200 Lightning Surge Absorber (CE/TÜV), 200V (+10/-15%).............................................. 0.100PM100TRA020 Transformer 2 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 26.000*PM100TRA020-E Transformer 2 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 46.000*PM100TRA035 Transformer 3.5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)............................... 37.000PM100TRA035-E Transformer 3.5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)...................... 11.000*PM100TRA050 Transformer 5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL).................................. 58.000*PM100TRA050-E Transformer 5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)......................... 70.000*PM100TRA070 Transformer 7 KVA, (multi-in / 230VAC-90VDC out, CE, CUL).................................. 75.000PM100TRA070-E Transformer 7 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)......................... 98.000*PM100TRA100 Transformer 10 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 100.000PM100TRA100-E Transformer 10 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 110.000PM100TRA120 Transformer 12 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 130.000*PM100TRA120-E Transformer 12KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)........................ 145.000*PM100TRA170 Transformer 17 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 125.000*PM100TRA170-E Transformer 17 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 138.000*PM100TRA220 Transformer 22 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 125.000*PM100TRA220-E Transformer 22 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 140.000*


Item Status



(kg)


MANUALSPM100LBR001 Alpha + Beta Drives Manuals Library.......................................................................... TBD

Note: This library contains the following manuals (English): B-65232EN, B-65235EN, B-65245EN, B-65142E, B-65165E, B65150E, B-65192EN, B-65195EN, B-65162E.

B-65232EN Beta Servo Description................................................................................................ 0.555B-65235EN Beta Servo Maintenance............................................................................................. 0.245B-65245EN Beta Servo I/O Link Programming............................................................................... 0.570B-65142E Alpha Servo Motors Descriptions Manual................................................................... 0.660B-65165E Alpha Servo Motors Maintenance Manual................................................................... 0.380B-65150E Alpha Servo Motors Parameter Manual...................................................................... 0.580

Note: Manuals are not included with the systems. They have to be ordered separately.


Item Status

ALPHA SERIES SERVO SYSTEMS (COMPACT / SVU)


(kg)


ALPHA SERVO MOTORS PACKAGESPM301SVS010 A-SVU-12 PWM, A Servo Motor (1Nm, 3000 rpm, 0.3kW)........................................ 5.300PM301SVS015 A-SVU-12 PWM, A Servo Motor (1Nm, 3000, 0.3kW, Brake 2 Nm).......................... 5.300PM301SVS020 A-SVU-12 PWM, A Servo Motor (2Nm, 3000 rpm, 0.5.kW)....................................... 8.550PM301SVS025 A-SVU-12 PWM, A Servo Motor (2Nm, 3000 rpm, 0.5kW, Brake 2 Nm)................... 6.300

Note: Add connector kits or cable kits type: Alpha 1/2

PM301SVS030 A-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9kW)........................................ 12.900PM301SVS035 A-SVU-40 PWM, A Servo Motor (3Nm, 3000 rpm, 0.9kW, Brake 8Nm).................... 12.900PM301SVS060 A-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4kW)........................................ 20.800PM301SVS065 A-SVU-80 PWM, A Servo Motor (6Nm, 3000 rpm, 1.4kW, Brake 8Nm).................... 17.900


PM301SVS120 A-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8kW)...................................... 23.000PM301SVS125 A-SVU-80 PWM, A Servo Motor (12Nm, 3000 rpm, 2.8kW, Brake 35Nm)................ 24.000


PM301SVS220 A-SVU-130 PWM, A Servo Motor (22Nm, 3000 rpm, 4.4kW).................................... 38.900PM301SVS225 A-SVU-130 PWM, A Servo Motor (22Nm, 3000 rpm, 4.4kW, Brake 35Nm).............. 38.900PM301SVS300 A-SVU-130 PWM, A Servo Motor (30Nm, 3000 rpm, 4.8kW).................................... 50.800PM301SVS305 A-SVU-130 PWM, A Servo Motor (30Nm, 3000 rpm, 4.8kW, Brake 35Nm).............. 50.900PM301SVS400 A-SVU-130 PWM, A Servo Motor (40Nm, 2000 rpm, 5.9kW).................................... TBDPM301SVS405 A-SVU-130 PWM, A Servo Motor (40Nm, 2000 rpm, 5.9kW, Brake 35Nm).............. 61.900

Note: Add connector kits or cable kits type: L

PM301SVS401 A-SVU-130 PWM, A Servo Motor (40Nm Fan, 2000 rpm, 7.3kW)............................. 61.900Note: Add connector kits L with Brake OR Fan, cable kits L and cable kit brake/fan 90VDC

PM301SVS406 A-SVU-130 PWM, A Servo Motor (40Nm Fan, 2000 rpm, 7.3kW, Brake 35Nm)....... 65.000Note: Add connector kits L with Brake AND Fan, cable kits L and 2x cable kit brake/fan 90VDC

Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is required (see the transformers section for details).Alpha motors are IP65, straight shaft and provide an absolute serial pulse coder.Add connector kits or cable kits to the above package as required.

ALPHA C SERVO MOTORS PACKAGESPM302SVS120 A-SVU-20 PWM, A C Servo Motor (12Nm, 2000 rpm, 1.0kW).................................... 20.300PM302SVS125 A-SVU-20 PWM, A C Servo Motor (12Nm, 2000 rpm, 1.0kW, Brake 35Nm).............. 20.300PM302SVS220 A-SVU-40 PWM, A C Servo Motor (22Nm, 1500 rpm, 1.5kW).................................... 34.000PM302SVS225 A-SVU-40 PWM, A C Servo Motor (22Nm, 1500 rpm, 1.5kW, Brake 35Nm).............. 33.900




Item Status



(kg)


ALPHA L SERVO MOTORS PACKAGESPM304SVS060 A-SVU-80 PWM, A L Servo Motor (6Nm, 3000 rpm, 1.4kW)..................................... 15.900PM304SVS060 A-SVU-80 PWM, A L Servo Motor (6Nm, 3000 rpm, 1.4kW)..................................... 15.900PM304SVS090 A-SVU-80 PWM, A L Servo Motor (9Nm, 3000 rpm, 2.0kW)..................................... 21.900



ALPHA M SERVO MOTORS PACKAGESPM303SVS020 A-SVU-20 PWM, A M Servo Motor (2Nm)................................................................... 6.300PM303SVS025 A-SVU-20 PWM, A M Servo Motor (2Nm + Brake)..................................................... 6.300

Note: Add connector kits or cable kits type: Alpha 1/2

PM303SVS090 A-SVU-80 PWM, A M Servo Motor (9Nm)................................................................... 17.000PM303SVS095 A-SVU-80 PWM, A M Servo Motor (9Nm + Brake)..................................................... 17.000



BETA SERVO MOTORS PACKAGESPM300SVS000 A-SVU-12 PWM, B Servo Motor (0.5Nm, 3000 rpm, 0.2kW)...................................... TBDPM300SVS005 A-SVU-12 PWM, B Servo Motor (0.5Nm, 3000 rpm, 0.2kW, Brake 0.65 Nm)............ 3.300

Note: Add connector kits or cable kits type: Beta 0.5

PM300SVS010 A-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW)......................................... 4.800PM300SVS015 A-SVU-12 PWM, B Servo Motor (1Nm, 3000 rpm, 0.3kW, Brake 2Nm)..................... 4.800PM300SVS020 A-SVU-12 PWM, B Servo Motor (2Nm, 3000 rpm, 0.5kW)......................................... 5.800PM300SVS025 A-SVU-12 PWM, B Servo Motor (2Nm, 3000 rpm, 0.5kW, Brake 2Nm)..................... 5.800PM300SVS030 A-SVU-20 PWM, B Servo Motor (3Nm, 3000 rpm, 0.5kW)......................................... 7.300PM300SVS035 A-SVU-20 PWM, B Servo Motor (3Nm, 3000 rpm, 0.5kW, Brake 8Nm)..................... 7.300PM300SVS060 A-SVU-20 PWM, B Servo Motor (6Nm, 3000 rpm, 0.9kW)......................................... 10.800PM300SVS065 A-SVU-20 PWM, B Servo Motor (6Nm, 3000 rpm, 0.9kW, Brake 8Nm)..................... 10.800

Note: Add connector kits or cable kits type: Beta 1-6

Note: Servo Packages above contain one servo motor, its matching servo amplifier, two AMP connectors (CX-3 and CX-4)The servo amplifier input voltage is 200-240VAC (+10/-15%,50-60Hz, 3 phases). For other input voltages, a transformer is required (see the transformers section for details).Beta motors are IP65, straight shaft and provide an absolute serial pulse coder.Add connector kits or cable kits to the above package as required.


Item Status



(kg)


CONNECTOR KITS FOR SERVO MOTORS STRAIGHTPM100ACC201 Connector Kit for Beta 0.5 Motor on SVU Straight...................................................... 0.015PM100ACC202 Connector Kit for Beta Motor on SVU Straight............................................................ 0.277PM100ACC203 Connector Kit for Alpha 1/2 Motor on SVU Straight.................................................... 0.160PM100ACC204 Connector Kit for Alpha Type S Motor on SVU Straight.............................................. 0.365PM100ACC205 Connector Kit for Alpha Type M Motor on SVU Straight............................................. 0.348PM100ACC206 Connector Kit for Alpha Type L Motor on SVU Straight.............................................. 0.436PM100ACC252 Connector Kit for Beta Motor on SVU Straight + Brake............................................... 0.577PM100ACC254 Connector Kit for Alpha Type S Motor on SVU Straight + Brake................................ 0.665PM100ACC255 Connector Kit for Alpha Type M Motor on SVU Straight + Brake................................ 0.648PM100ACC256 Connector Kit for Alpha Type L Motor on SVU Straight + Brake.................................PM100ACC266 Connector Kit for Alpha Type L Motor on SVU Straight + Brake + Fan....................... TBD


CONNECTOR KITS SERVO MOTORS ELBOWPM100ACC302 Connector Kit for Beta Motor on SVU Elbow............................................................... 0.670PM100ACC304 Connector Kit for Alpha Type S Motor on SVU Elbow................................................. 0.500PM100ACC305 Connector Kit for Alpha Type M Motor on SVU Elbow................................................ 0.400PM100ACC306 Connector Kit for Alpha Type L Motor on SVU Elbow................................................. 0.500PM100ACC352 Connector Kit for Beta Motor on SVU Elbow + Brake................................................. 0.200PM100ACC354 Connector Kit for Alpha Type S Motor on SVU Elbow + Brake................................... 0.500PM100ACC355 Connector Kit for Alpha Type M Motor on SVU Elbow + Brake................................... 0.450PM100ACC356 Connector Kit for Alpha Type L Motor on SVU Elbow + Brake.................................... 0.300PM100ACC366 Connector Kit for Alpha Type L Motor on SVU Elbow + Brake + Fan......................... 0.300



Item Status



(kg)


CABLE KITS FOR SERVO MOTORS (STRAIGHT)PM400CBS103 Cable Kit Beta 0.5 Motor / Alpha-SVU 3m Straight..................................................... TBDPM400CBS105 Cable Kit Beta 0.5 Motor / Alpha-SVU 5m Straight..................................................... TBDPM400CBS107 Cable Kit Beta 0.5 Motor / Alpha-SVU 7m Straight..................................................... TBDPM400CBS110 Cable Kit Beta 0.5 Motor / Alpha-SVU 10m Straight................................................... TBDPM400CBS114 Cable Kit Beta 0.5 Motor / Alpha-SVU 14m Straight................................................... TBDPM400CBS118 Cable Kit Beta 0.5 Motor / Alpha-SVU 18m Straight................................................... TBDPM400CBS122 Cable Kit Beta 0.5 Motor / Alpha-SVU 22m Straight................................................... TBDPM400CBS127 Cable Kit Beta 0.5 Motor / Alpha-SVU 27m Straight................................................... TBDPM400CBS130 Cable Kit Beta 0.5 Motor / Alpha-SVU 30m Straight................................................... TBDPM400CBS203 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 3m Straight................................................ 1.255PM400CBS205 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 5m Straight................................................ 1.935PM400CBS207 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 7m Straight................................................ 2.615PM400CBS210 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 10m Straight.............................................. TBDPM400CBS214 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 14m Straight.............................................. TBDPM400CBS218 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 18m Straight.............................................. TBDPM400CBS222 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 22m Straight.............................................. TBDPM400CBS227 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 27m Straight.............................................. TBDPM400CBS230 Cable Kit Beta 1, 2, 3 and 6 / Alpha-SVU 30m Straight.............................................. TBDPM400CBS303 Cable Kit Alpha 1/2 Motor / Alpha-SVU 3m Straight................................................... 3.000PM400CBS305 Cable Kit Alpha 1/2 Motor / Alpha-SVU 5m Straight................................................... TBDPM400CBS307 Cable Kit Alpha 1/2 Motor / Alpha-SVU 7m Straight................................................... TBDPM400CBS310 Cable Kit Alpha 1/2 Motor / Alpha-SVU 10m Straight................................................. TBDPM400CBS314 Cable Kit Alpha 1/2 Motor / Alpha-SVU 14m Straight................................................. TBDPM400CBS318 Cable Kit Alpha 1/2 Motor / Alpha-SVU 18m Straight................................................. TBDPM400CBS322 Cable Kit Alpha 1/2 Motor / Alpha-SVU 22m Straight................................................. TBDPM400CBS327 Cable Kit Alpha 1/2 Motor / Alpha-SVU 27m Straight................................................. TBDPM400CBS330 Cable Kit Alpha 1/2 Motor / Alpha-SVU 30m Straight................................................. TBDPM400CBS403 Cable Kit Alpha Type S Motor / Alpha-SVU 3m Straight............................................. 1.343PM400CBS405 Cable Kit Alpha Type S Motor / Alpha-SVU 5m Straight............................................. TBDPM400CBS407 Cable Kit Alpha Type S Motor / Alpha-SVU 7m Straight............................................. TBDPM400CBS410 Cable Kit Alpha Type S Motor / Alpha-SVU 10m Straight........................................... TBDPM400CBS414 Cable Kit Alpha Type S Motor / Alpha-SVU 14m Straight........................................... TBDPM400CBS418 Cable Kit Alpha Type S Motor / Alpha-SVU 18m Straight........................................... TBDPM400CBS422 Cable Kit Alpha Type S Motor / Alpha-SVU 22m Straight........................................... TBDPM400CBS427 Cable Kit Alpha Type S Motor / Alpha-SVU 27m Straight........................................... TBDPM400CBS430 Cable Kit Alpha Type S Motor / Alpha-SVU 30m Straight........................................... TBDPM400CBS503 Cable Kit Alpha Type M Motor / Alpha-SVU 3m Straight............................................ TBDPM400CBS505 Cable Kit Alpha Type M Motor / Alpha-SVU 5m Straight............................................ TBDPM400CBS507 Cable Kit Alpha Type M Motor / Alpha-SVU 7m Straight............................................ TBDPM400CBS510 Cable Kit Alpha Type M Motor / Alpha-SVU 10m Straight.......................................... TBDPM400CBS514 Cable Kit Alpha Type M Motor / Alpha-SVU 14m Straight.......................................... TBDPM400CBS518 Cable Kit Alpha Type M Motor / Alpha-SVU 18m Straight.......................................... TBDPM400CBS522 Cable Kit Alpha Type M Motor / Alpha-SVU 22m Straight.......................................... TBDPM400CBS527 Cable Kit Alpha Type M Motor / Alpha-SVU 27m Straight.......................................... TBDPM400CBS530 Cable Kit Alpha Type M Motor / Alpha-SVU 30m Straight.......................................... TBDPM400CBS603 Cable Kit Alpha Type L Motor / Alpha-SVU 3m Straight............................................. 2.063PM400CBS605 Cable Kit Alpha Type L Motor / Alpha-SVU 5m Straight............................................. TBDPM400CBS607 Cable Kit Alpha Type L Motor / Alpha-SVU 7m Straight............................................. TBDPM400CBS610 Cable Kit Alpha Type L Motor / Alpha-SVU 10m Straight........................................... TBDPM400CBS614 Cable Kit Alpha Type L Motor / Alpha-SVU 14m Straight........................................... TBDPM400CBS618 Cable Kit Alpha Type L Motor / Alpha-SVU 18m Straight........................................... TBDPM400CBS622 Cable Kit Alpha Type L Motor / Alpha-SVU 22m Straight........................................... TBDPM400CBS627 Cable Kit Alpha Type L Motor / Alpha-SVU 27m Straight........................................... 17.038PM400CBS630 Cable Kit Alpha Type L Motor / Alpha-SVU 30m Straight........................................... TBD


Item Status



(kg)


Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal, both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m, 27m and 30m. For other lengths contact GE Fanuc or its representative.

CABLE KITS FOR SERVO MOTORS (ELBOW)PM400CBE203 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 3m Elbow............................................... TBDPM400CBE205 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 5m Elbow............................................... TBDPM400CBE207 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 7m Elbow............................................... TBDPM400CBE210 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 10m Elbow............................................. TBDPM400CBE214 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 14m Elbow............................................. TBDPM400CBE218 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 18m Elbow............................................. TBDPM400CBE222 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 22m Elbow............................................. TBDPM400CBE227 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 27m Elbow............................................. TBDPM400CBE230 Cable Kit Beta 1, 2, 3, 6 Motor / Alpha-SVU 30m Elbow............................................. TBDPM400CBE403 Cable Kit Alpha Type S Motor / Alpha-SVU 3m Elbow................................................ TBDPM400CBE405 Cable Kit Alpha Type S Motor / Alpha-SVU 5m Elbow................................................ TBDPM400CBE407 Cable Kit Alpha Type S Motor / Alpha-SVU 7m Elbow................................................ TBDPM400CBE410 Cable Kit Alpha Type S Motor / Alpha-SVU 10m Elbow.............................................. TBDPM400CBE414 Cable Kit Alpha Type S Motor / Alpha-SVU 14m Elbow.............................................. 3.029PM400CBE418 Cable Kit Alpha Type S Motor / Alpha-SVU 18m Elbow.............................................. TBDPM400CBE422 Cable Kit Alpha Type S Motor / Alpha-SVU 22m Elbow.............................................. 8.150PM400CBE427 Cable Kit Alpha Type S Motor / Alpha-SVU 27m Elbow.............................................. TBDPM400CBE430 Cable Kit Alpha Type S Motor / Alpha-SVU 30m Elbow.............................................. TBDPM400CBE503 Cable Kit Alpha Type M Motor / Alpha-SVU 3m Elbow............................................... 2.000PM400CBE505 Cable Kit Alpha Type M Motor / Alpha-SVU 5m Elbow............................................... 1.000PM400CBE507 Cable Kit Alpha Type M Motor / Alpha-SVU 7m Elbow............................................... 3.450PM400CBE510 Cable Kit Alpha Type M Motor / Alpha-SVU 10m Elbow............................................. 2.350PM400CBE514 Cable Kit Alpha Type M Motor / Alpha-SVU 14m Elbow............................................. TBDPM400CBE518 Cable Kit Alpha Type M Motor / Alpha-SVU 18m Elbow............................................. TBDPM400CBE522 Cable Kit Alpha Type M Motor / Alpha-SVU 22m Elbow............................................. TBDPM400CBE527 Cable Kit Alpha Type M Motor / Alpha-SVU 27m Elbow............................................. TBDPM400CBE530 Cable Kit Alpha Type M Motor / Alpha-SVU 30m Elbow............................................. TBDPM400CBE603 Cable Kit Alpha Type L Motor / Alpha-SVU 3m Elbow................................................ TBDPM400CBE605 Cable Kit Alpha Type L Motor / Alpha-SVU 5m Elbow................................................ 3.540PM400CBE607 Cable Kit Alpha Type L Motor / Alpha-SVU 7m Elbow................................................ 0.300PM400CBE610 Cable Kit Alpha Type L Motor / Alpha-SVU 10m Elbow.............................................. TBDPM400CBE614 Cable Kit Alpha Type L Motor / Alpha-SVU 14m Elbow.............................................. TBDPM400CBE618 Cable Kit Alpha Type L Motor / Alpha-SVU 18m Elbow.............................................. TBDPM400CBE622 Cable Kit Alpha Type L Motor / Alpha-SVU 22m Elbow.............................................. TBDPM400CBE627 Cable Kit Alpha Type L Motor / Alpha-SVU 27m Elbow.............................................. 51.184PM400CBE630 Cable Kit Alpha Type L Motor / Alpha-SVU 30m Elbow.............................................. TBD

Note: Cable Kits for the servo motors without brake contain one cable for the power and one for the serial pulse coder signal, both the same length. Cables have connectors at both ends. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m, 27m and 30m. For other lengths contact GE Fanuc or its representative.


Item Status



(kg)


CABLE KITS FOR BRAKESPM200CBS003 Cable Brake 90 VDC / Fan, Type S, M & L 3m Straight............................................. 0.200PM200CBS005 Cable Brake 90 VDC / Fan, Type S, M & L 5m Straight............................................. 0.300PM200CBS007 Cable Brake 90 VDC / Fan, Type S, M & L 7m Straight............................................. TBDPM200CBS010 Cable Brake 90 VDC / Fan, Type S, M & L 10m Straight........................................... 0.750PM200CBS014 Cable Brake 90 VDC / Fan, Type S, M & L 14m Straight........................................... TBDPM200CBS018 Cable Brake 90 VDC / Fan, Type S, M & L 18m Straight........................................... TBDPM200CBS022 Cable Brake 90 VDC / Fan, Type S, M & L 22m Straight........................................... TBDPM200CBS027 Cable Brake 90 VDC / Fan, Type S, M & L 27m Straight........................................... TBDPM200CBS030 Cable Brake 90 VDC / Fan, Type S, M & L 30m Straight........................................... TBDPM200CBE003 Cable Brake 90 VDC / Fan, Type S, M & L 3m Elbow............................................... 0.281PM200CBE005 Cable Brake 90 VDC / Fan, Type S, M & L 5m Elbow............................................... 0.413PM200CBE007 Cable Brake 90 VDC / Fan, Type S, M & L 7m Elbow............................................... 0.657PM200CBE010 Cable Brake 90 VDC / Fan, Type S, M & L 10m Elbow............................................. 0.767PM200CBE014 Cable Brake 90 VDC / Fan, Type S, M & L 14m Elbow............................................. 1.050PM200CBE018 Cable Brake 90 VDC / Fan, Type S, M & L 18m Elbow............................................. 1.300PM200CBE022 Cable Brake 90 VDC / Fan, Type S, M & L 22m Elbow............................................. 1.800PM200CBE027 Cable Brake 90 VDC / Fan, Type S, M & L 27m Elbow............................................. TBDPM200CBE030 Cable Brake 90 VDC / Fan, Type S, M & L 30m Elbow............................................. TBD

Note: Power and serial pulse coder cables have connectors at both ends, brake cable has a connector only at the motor side; all cables in the Kit are the same length. Standard available lengths are 3m, 5m, 7m, 10m, 14m, 18m, 22m, 27m and 30m. For other lengths contact GE Fanuc or its representative.

ACCESSORIESPM300RDR020 Alpha SVU Regenerative Discharge Resistor 16 Ohms 200W................................... 5.000

Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more information.

PM300RDR080 Alpha SVU Regenerative Discharge Resistor 16 Ohms 800W................................... 5.000Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more information.

PM300RDR085 Alpha SVU Regenerative Discharge Resistor 16 Ohms 800W for A-SVU-130........... 3.750Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more information.

PM300RDR125 Alpha SVU Regenerative Discharge Resistor 16 Ohms 1200W for A-SVU-130......... 6.000Note: A regenerative discharge resistor is required when the amount of regenerative energy exceeds certain limits. Refer to GFHE-002 (Alpha Servo Specification Guide) for more information.

PM300BAT101 Absolute Encoder Battery + Battery Box (separate unit) + Connectors...................... 1.000Note: The battery is required when the position information needs to be followed when the motion controller is turned off. The serial pulse coder will behave in this case as an ABSOLUTE encoder. One battery unit can drive up to 4 amplifiers/axis.

PM100ACC102 Honda PCR20 Connectors Crimp (Spare Qty 5)......................................................... 0.250PM100ACC103 Honda PCR20 Connectors Solder (Spare Qty 5)........................................................ 0.400PM100ACC104 Hirose 15 Pin Connectors Solder (Spare Qty 5).......................................................... 0.100PM300ACC100 Fuses for 24VDC PS of Alpha-SVU (Spare Qty 5)...................................................... 0.005PM300ACC101 AMP Connector for CX3 on Alpha-SVU (Spare Qty 5)................................................ 0.025PM300ACC102 APM Connector for CX4 on Alpha-SVU (Spare Qty 5)................................................ 0.100


Item Status



(kg)


TRANSFORMERS AND LINE FILTERSPM100LFT054 Line Filter, 200-230VAC Input Voltage (+10/-15%) PSMR-3, 5.4kW.......................... 0.600PM100LFT105 Line Filter, 200-230VAC Input Voltage (+10/-15%) PSMR-5.5, 10.5kW..................... 3.400PM100LFT230 Line Filter, 200-230VAC Input Voltage (+10/-15%) C, 23kW...................................... 3.162PM100LSA200 Lightning Surge Absorber (CE/TÜV), 200V (+10/-15%).............................................. 0.100PM100TRA020 Transformer 2 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 26.000*PM100TRA020-E Transformer 2 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 46.000*PM100TRA035 Transformer 3.5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)............................... 37.000PM100TRA035-E Transformer 3.5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)...................... 11.000*PM100TRA050 Transformer 5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL).................................. 58.000*PM100TRA050-E Transformer 5 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)......................... 70.000*PM100TRA070 Transformer 7 KVA, (multi-in / 230VAC-90VDC out, CE, CUL).................................. 75.000PM100TRA070-E Transformer 7 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)......................... 98.000*PM100TRA100 Transformer 10 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 100.000PM100TRA100-E Transformer 10 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 110.000PM100TRA120 Transformer 12 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 130.000*PM100TRA120-E Transformer 12KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)........................ 145.000*PM100TRA170 Transformer 17 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 125.000*PM100TRA170-E Transformer 17 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 138.000*PM100TRA220 Transformer 22 KVA, (multi-in / 230VAC-90VDC out, CE, CUL)................................ 125.000*PM100TRA220-E Transformer 22 KVA, (multi-in / 230VAC-90VDC out, CE, CUL, IP23)....................... 140.000*

MANUALSPM100LBR001 Alpha + Beta Drives Manuals Library.......................................................................... TBD


B-65192EN Alpha SVU Descriptions Manual................................................................................. 0.277B-65195EN Alpha SVU Maintenance Manual................................................................................. 0.500B-65142E Alpha Servo Motors Descriptions Manual................................................................... 0.660B-65150E Alpha Servo Motors Parameter Manual...................................................................... 0.580B-65232EN Beta Servo Description................................................................................................ 0.555B-65235EN Beta Servo Maintenance............................................................................................. 0.245

Note: Manuals are not included with the systems. They have to be ordered separately.


Item Status

STAND ALONE MOTION


(kg)


STAND ALONE MOTIONGE Fanuc S2K Series products offer amplifier and control capability for servos systems in a stand-alone integrated package. The S2K controller supports Point-to-Point motion for Pick-and-Place application as well as complex cam motion for packaging applications.

The communication interfaces allow an easy integration in the automation environment via Profibus DP, DeviceNet or Modbus / RS232. With the use of Motion Developer as a part of CIMPLICITY Machine Edition the user will have all benefits of a single unified working environment.

S2K CONTROLLERThese devices offer amplifier and control capability in one package. All controllers have a second encoder interface for an external master, two analogue inputs, one analogue output and one serial RS 232 interface to link the programming tool Motion Developer or an operator panel such as Data Panel or Quick Panel.

All controllers with fieldbus interface provide 8 digital inputs and 6 digital I/O's, which are programmable for inputs or outputs. The controllers without fieldbus interface offer 11 digital inputs and 10 programmable I/O's.

The S2K controllers are available in four different power ratings. Please combine the best fitting motor with the help of the motor manual. Please ask for the cable kits.

IC800SSI104RD2 S2K Stand Alone Motion Controller with DeviceNet(4A, 230 VAC, single phase).

1.800#

IC800SSI104RP2 S2K Stand Alone Motion Controller with Profibus (4 A, 230 VAC, single phase)...

1.800#

IC800SSI104RS1 S2K Stand Alone Motion Controller with 21 I/O (4 A, 230 VAC, single phase)

1.800#

IC800SSI107RD2 S2K Stand Alone Motion Controller with DeviceNet (7 A, 230 VAC, single phase)

2.700#

IC800SSI107RP2 S2K Stand Alone Motion Controller with Profibus (7 A, 230 VAC, single phase)...

2.700#

IC800SSI107RS1 S2K Stand Alone Motion Controller with 21 I/O ( 7A, 230 VAC, single phase)

2.700#

IC800SSI407RD2 S2K Stand Alone Motion Controller with DeviceNet (7 A, 400 VAC, Three Phase)

6.400#

IC800SSI407RP2 S2K Stand Alone Motion Controller with Profibus (7 A, 400 VAC, Three Phase).

6.400#

IC800SSI407RS1 S2K Stand Alone Motion Controller with 21 I/O (7 A, 400 VAC, Three Phase).

6.400#

IC800SSI420RD2 S2K Stand Alone Motion Controller with DeviceNet (20 A, 400 VAC, Three Phase)

6.400#

IC800SSI420RP2 S2K Stand Alone Motion Controller with Profibus (20 A,400 VAC, Three Phase).

6.400#

IC800SSI420RS1 S2K Stand Alone Motion Controller with 21 I/O (20 A, 400 VAC, Three Phase)

6.400#


Item Status

STAND ALONE MOTION


(kg)


SA MOTORS WITHOUT BRAKESA motors are the standard motors for S2K drives. These motors features high dynamic performance and compact dimensions. Not at least the rugged design and the resolver feedback assure high reliability. You will find the description of the motor catalog numbers in the motor manual. If you can't find the best fitting servo motor in this list, ask for the extended motor line.

Please ask for the cable kits. The following motors are without brake.

SK800MSA055C032AR001 S2K servo motor, 0.4 Nm, with keyway, without brake................................................ 1.400#SK800MSA070C044AR001 S2K servo motor, 1.2 Nm, with keyway, without brake................................................ 2.600#SK800MSA092C044AR001 S2K servo motor, 1.5 Nm, with keyway, without brake................................................ 4.300#SK800MSA092E044AR001 S2K servo motor, 2.2 Nm, with keyway, without brake................................................ 5.100#SK800MSA115A088AR001 S2K servo motor, 3.7 Nm, with keyway, without brake................................................ 6.600#SK800MSA115C088AR001 S2K servo motor, 6.8 Nm, with keyway, without brake................................................ 9.000#SK800MSA115E088AR001 S2K servo motor, 9.8 Nm, with keyway, without brake................................................ 11.400#SK800MSA142C088AR001 S2K servo motor, 11.3 Nm, with keyway, without brake.............................................. 14.000#SK800MSA142E130AR001 S2K servo motor, 16 Nm, with keyway, without brake................................................. 18.000#SK800MSA142G130AR001 S2K servo motor, 21 Nm, with keyway, without brake................................................. 21.000#SK800MSA190C180AR001 S2K servo motor, 32 Nm, with keyway, without brake................................................. 28.500#

SA MOTORS WITH BRAKEThe following motors are the same as above, but with brake. The brake supply voltage is 24 V DC. Please ask for the cable kits.

SK800MSA055C032BR001 S2K servo motor, 0.4 Nm, with keyway, with brake..................................................... 1.400#SK800MSA070C044BR001 S2K servo motor, 1.2 Nm, with keyway, with brake..................................................... 2.600#SK800MSA092C044BR001 S2K servo motor, 1.5 Nm, with keyway, with brake..................................................... 4.300#SK800MSA092E044BR001 S2K servo motor, 2.2 Nm, with keyway, with brake..................................................... 5.100#SK800MSA115A088BR001 S2K servo motor, 3.7 Nm, with keyway, with brake..................................................... 6.600#SK800MSA115C088BR001 S2K servo motor, 6.8 Nm, with keyway, with brake..................................................... 9.000#SK800MSA115E088BR001 S2K servo motor, 9.8 Nm, with keyway, with brake..................................................... 11.400#SK800MSA142C088BR001 S2K servo motor, 11.3 Nm, with keyway, with brake................................................... 14.000#SK800MSA142E130BR001 S2K servo motor, 16 Nm, with keyway, with brake...................................................... 18.000#SK800MSA142G130BR001 S2K servo motor, 21 Nm, with keyway, with brake...................................................... 21.000#SK800MSA190C180BR001 S2K servo motor, 32 Nm, with keyway, with brake...................................................... 28.500#

ACCESSORIESTo complete the S2K with motor to a running system you have to add only the cable kit.

Accessories like filters, absolute encoders, operator panels or additional I/O's are available on request.

IC800SKCS030 S2K / PC communication cable................................................................................... 0.220Note: This cable is used between the S2K and the PC with the software Motion Developer.

#

CABLE KITSThe cable kits existing of one motor cable and one resolver cable. Cable kits are available on request.


Item Status

STAND ALONE MOTION


(kg)


PROGRAMMING SOFTWAREThe programming tool Motion Developer, which is integrated in the automation software CIMPLICITY Machine Edition, offers all benefits of a single programming environment. With the help of Configuration Wizards you can simply select and download the parameters for the motor / drive combination. Application Wizards provide step-by-step instructions to guide the first-time user through controller configuration and simple motion programming. Flowchart programming is the solution for easy-to-use software development. Diagnostic tools such as Motion Oscilloscope and Histogram function allow extensive debugging.

IC800FXMODEV CIMPLICITY Motion Developer software for the S2K Series Amplifier/Controllers, single license, software only

0.500

Note: Communication cable is not included. Add SAFE for Machine Developer to receive free software version upgrades and unlimited calls to Technical Support Help Desk.

*

IC800SKCS030 S2K / PC communication cable................................................................................... 0.220Note: This cable is used between the S2K and the PC with the software Motion Developer.

#

Note: For the complete overview of the Machine Edition Software see CIMPLICITY Machine Edition.

SAFE for CIMPLICITY Motion DeveloperWith CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls toTechnical Support Help Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY Machine Edition. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on an annual basis. The Technical Support helpdesk is available for 3 callers, additional callers support may be purchased with part number IC648SAF000.

SA648FXMODEV SAFE FOR CIMPLICITY Motion Developer (IC646FXMODEV)............................

0.500*


Item Status

CIMPLICITY® MACHINE EDITION


(kg)


CIMPLICITY MACHINE EDITIONCIMPLICITY® MACHINE EDITION is a suite of Machine Level software components used to develop HMI, Control and Motion applications within one single unified working environment.Machine edition contains the following components:

-CIMPLICITY® View, a powerful HMI software dedicated to machine control.-CIMPLICITY® Logic Developer PC, a proven SoftPLC.-CIMPLICITY® Logic Developer PLC, for programming GE Fanuc PLCs.-CIMPLICITY® Manager, for applications management. Please contact GE Fanuc for quotation.

All components of CIMPLICITY® Machine Edition are tightly integrated into one single programming environment and share the same database. All components ship on one CD and are activated by licenses. CIMPLICITY® MACHINE EDITION ships with a 4-day trial period for all components. Once you receive your order you are asked to register your license on the web at www.gefanuc.com/CimplicityReg/. Once registered, a free 90-day software upgrade service (SAFE) is provided. GE Fanuc strongly recommends to purchase an optional SAFE contract which provides 1 year of free upgrades and product support.

LOGIC PC & VIEW DEVELOPMENT/RUNTIMEIC646MDA075 View Development/Runtime 75 I/O............................................................................. 2.978IC646MDA150 View Development/Runtime 150 I/O........................................................................... 2.978IC646MDA300 View Development/Runtime 300 I/O........................................................................... 2.978IC646MDA700 View Development/Runtime 700 I/O........................................................................... 2.978IC646MDA159 View Development/Runtime 1500 I/O......................................................................... 2.978IC646MDB075 Logic Developer PC with Runtime 75 I/O.................................................................... 2.978IC646MDB150 Logic Developer PC with Runtime 150 I/O.................................................................. 2.978IC646MDB300 Logic Developer PC with Runtime 300 I/O.................................................................. 2.978IC646MDB700 Logic Developer PC with Runtime 700 I/O.................................................................. 2.978IC646MDB159 Logic Developer PC with Runtime 1500 I/O................................................................ 2.978IC646MDC075 Logic Developer PC & View Development/Runtime 75 I/O......................................... 2.978IC646MDC150 Logic Developer PC & View Development/Runtime 150 I/O....................................... 2.978IC646MDC300 Logic Developer PC & View Development/Runtime 300 I/O....................................... 2.978IC646MDC700 Logic Developer PC & View Development/Runtime 700 I/O....................................... 2.978IC646MDC159 Logic Developer PC & View Development/Runtime 1500 I/O..................................... 2.978

Note: Supports Windows 98 SE/NT/2000/XP for Development. Runtimes can be executed on Win NT/2000/XP platforms. Systems include all available drivers and features including Web Publishing. (Check driver list for available control and PLC access on particular target platforms). I/O point count includes I/O variables ony (internal points not counted). Each Runtime/Development system contains a Runtime and Developmment License for the respective product purchased. For Application larger than 1500 I/O, please contact Product Marketing.

LOGIC PC & VIEW DEVELOPMENT/RUNTIME HARD REAL TIMEIC646MDD075 Logic Developer PC with Runtime (HRT) 75 I/O......................................................... 2.978IC646MDD150 Logic Developer PC with Runtime (HRT) 150 I/O....................................................... 2.978IC646MDD300 Logic Developer PC with Runtime (HRT) 300 I/O....................................................... 2.978IC646MDD700 Logic Developer PC with Runtime (HRT) 700 I/O....................................................... 2.978IC646MDD159 Logic Developer PC with Runtime (HRT) 1500 I/O..................................................... 2.978IC646MDE075 Logic Developer PC & View Development/Runtime (HRT) 75 I/O.............................. 2.978IC646MDE150 Logic Developer PC & View Development/Runtime (HRT) 150 I/O............................ 2.978IC646MDE300 Logic Developer PC & View Development/Runtime (HRT) 300 I/O............................ 2.978IC646MDE700 Logic Developer PC & View Development/Runtime (HRT) 700 I/O............................ 2.978IC646MDE159 Logic Developer PC & View Development/Runtime (HRT) 1500 I/O.......................... 2.978

Note: Includes everything in the standard Machine Edition Runtime/Development system plus VenturCom's Hard Real Time (HRT) Extension for CIMPLICITY Logic PC. For Application larger than 1500 I/O, please contact Product Marketing.


Item Status



(kg)


LOGIC PC & VIEW RUNTIMEIC646MRA075 View Runtime 75 I/O.................................................................................................... 2.978IC646MRA150 View Runtime 150 I/O.................................................................................................. 2.978IC646MRA300 View Runtime 300 I/O.................................................................................................. 2.978IC646MRA700 View Runtime 700 I/O.................................................................................................. 2.978IC646MRA159 View Runtime 1500 I/O................................................................................................ 2.978IC646MRB075 Logic PC Runtime 75 I/O............................................................................................. 2.978IC646MRB150 Logic PC Runtime 150 I/O........................................................................................... 2.978IC646MRB300 Logic PC Runtime 300 I/O........................................................................................... 2.978IC646MRB700 Logic PC Runtime 700 I/O........................................................................................... 2.978IC646MRB159 Logic PC Runtime 1500 I/O......................................................................................... 2.978IC646MRC075 Logic PC & View Runtime 75 I/O................................................................................. 2.978IC646MRC150 Logic PC & View Runtime 150 I/O............................................................................... 2.978IC646MRC300 Logic PC & View Runtime 300 I/O............................................................................... 2.978IC646MRC700 Logic PC & View Runtime 700 I/O............................................................................... 2.978IC646MRC159 Logic PC & View Runtime 1500 I/O............................................................................. 2.978

Note: Suports Windows NT/2000/XP for Runtime platforms. Each system contains a Runtime license for the respective product purchased. For Application larger than 1500 I/O, please contact Product Marketing.

LOGIC PC & VIEW RUNTIME HARD REAL TIMEIC646MRD075 Logic PC Runtime (HRT) 75 I/O................................................................................. 2.978IC646MRD150 Logic PC Runtime (HRT) 150 I/O............................................................................... 2.978IC646MRD300 Logic PC Runtime (HRT) 300 I/O............................................................................... 2.978IC646MRD700 Logic PC Runtime (HRT) 700 I/O............................................................................... 2.978IC646MRD159 Logic PC Runtime (HRT) 1500 I/O............................................................................. 2.978IC646MRE075 Logic PC & View Runtime (HRT) 75 I/O..................................................................... 2.978IC646MRE150 Logic PC & View Runtime (HRT) 150 I/O................................................................... 2.978IC646MRE300 Logic PC & View Runtime (HRT) 300 I/O................................................................... 2.978IC646MRE700 Logic PC & View Runtime (HRT) 700 I/O................................................................... 2.978IC646MRE159 Logic PC & View Runtime (HRT) 1500 I/O................................................................. 2.978

Note: Includes everything in the standard Machine Edition Runtime system plus VenturCom's Hard Real Time (HRT) Extension for for CIMPLICITY Logic PC. For Application larger than 1500 I/O, please contact Product Marketing.

I/O COMMUNICATION BOARDAP646SDN100 SST DeviceNet card PCI............................................................................................. 0.500AP646SDN101 SST DeviceNet card ISA............................................................................................. 0.500AP646SMO101 SST Modicon RIO card V4 ISA................................................................................... 0.500AP646SPB100 SST Profibus card PCI................................................................................................ 0.500AP646SPB101 SST Profibus card ISA................................................................................................. 0.500AP646SDN000 OEM SST DeviceNet card PCI.................................................................................... 0.500AP646SDN001 OEM SST DeviceNet card ISA.................................................................................... 0.500AP646SIB001 OEM SST Interbus card ISA........................................................................................ 0.500AP646SPB000 OEM SST Profibus card PCI....................................................................................... 0.500AP646SPB001 OEM SST Profibus card ISA....................................................................................... 0.500

Note: Standard package comes complete with hardware , software, an electronic copy of the hardware and sotware manuals and an advanced network configuration tool, monitoring and diagnostic software, OPC and DDE data servers, driver development code.OEM package comes without software, with hardware, an electronic copy of the hardware and sotware manuals and a simple network configuration tool.


Item Status



(kg)


LOGIC DEVELOPER -PLCAs part of the CIMPLICITY Machine Edition product family, VersaPro has been integrated into the unified working environment as Logic Developer PLC, which is fully compatible with existing VersaPro-based applications. Logic Developer PLC also allows users of Logicmaster and Control to import their existing programs. Logic Developer PLC offers a broad range of flexible and powerful tools to configure and program GE Fanuc's PLC's including VersaMax Nano/Micro, VersaMax, Series 90-Micro, Series 90-30 and Series 90-70. Powerful on-line diagnostic tools help in debugging programs or diagnosing issues and problems that may have occurred with your system. Programming languages supported are Ladder Diagram (LD) and Instruction List (IL) and C-Blocks. Logic Developer PLC can be combined with other CIMPLICITY ME components such as View or Motion Developer.

Logic Developer PLC is available as 3 editions depending on PLC hardware support:

-Nano/Micro Edition provides support for VersaMax Nano/Micro and Series 90 Micro PLC’s.-Standard Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90 Micro and Series 90-30 PLC’s. -Professional Edition provides support for VersaMax Nano/Micro, VersaMax PLC’s, Series 90 Micro and Series 90-30 and Series 90-70.

IC646MPM101 Logic Developer - PLC Nano/Micro Edition, single license, with Programming Cable 0.500Note: Includes DB-9 to RJ45 programming cable to connect the Micro PLC to the serial port of a PC. (PN: IC200CBL500)

*

IC646MPM001 Logic Developer - PLC Nano/Micro Edition, single license, software only.................. 0.500*IC646MPS101 Logic Developer - PLC Standard Edition, single license, with Programming Cable

and RS485 Mini-Converter0.500


*

IC646MPS001 Logic Developer - PLC Standard Edition - single license, software only..................... 0.500Note: Includes GE Fanuc's InfoLink CD with electronic documentation for VersaMax and Series 90 PLCs.

*

IC646MPS005 Logic Developer - PLC Standard Edition - 5 Pack....................................................... 0.500*IC646MPS010 Logic Developer - PLC Standard Edition - 10 Pack..................................................... 0.500*IC646MPS025 Logic Developer - PLC Standard Edition - 25 Pack..................................................... 0.500*IC646MPS050 Logic Developer - PLC Standard Edition - 50 Pack..................................................... 0.500*IC646MPSS50 Logic Developer - PLC Standard Edition - 50 Seat Site License................................. 0.500*IC646MPSS99 Logic Developer - PLC Standard Edition - Unlimited Seat Site License...................... 0.500


*

IC646MPP101 Logic Developer - PLC Professional Edition, single license, with Programming Cable and RS485 Mini-Converter

0.500*

IC646MPP001 Logic Developer - PLC Professional Edition, single license, software only................. 0.500*IC646MPP005 Logic Developer - PLC Professional Edition - 5 Pack................................................. 0.500*IC646MPP010 Logic Developer - PLC Professional Edition - 10 Pack............................................... 0.500*IC646MPP050 Logic Developer - PLC Professional Edition - 50 Pack.............................................. 0.500*IC646MPPS50 Logic Developer - PLC Professional Edition - 50 Seat Site License........................... 0.500*IC646MPPS99 Logic Developer - PLC Professional Edition - Unlimited Seat Site License................ 0.500


*

IC646MPC001 Logic Developer - PLC Configuration Tools................................................................ 0.500Note: This tool is required to configure the VersaMax Remote IO (Network Interface Units). It is included in Logic Developer PLC Standard or Professional Edition.

*

IC646MPC101 Logic Developer - PLC Configuration Tools with Programming Cable........................ 0.500*


Item Status



(kg)


LOGIC DEVELOPER -PLC UPGRADESIC646MPMU01 Logic Developer - PLC Nano/Micro Edition -Upgrade from VersaPro Nano/Micro,

single license. Proof of purchase required.0.500

Note: Requires previous version of VersaPro Nano/Micro or Logicmaster Series 90-Micro. Please provide proof of purchase (PO#).

*

IC646MPSU01 Logic Developer - PLC Standard Edition, single license, Upgrade from Logicmaster 90-30 or Control. (Serial number required with valid subscription service).

0.500


*


0.500


*

IC646MPPU01 Logic Developer - PLC Professional Edition, single license, Upgrade from VersaPro Professional, Logicmaster 90-70 or Control. (Serial number required with valid subscription service).

0.500

Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster Series 90-70 with valid subscription service. Please provide serial number.

*

IC646MPPU11 Logic Developer - PLC Professional Edition, single license, Upgrade from VersaPro Professional Edition, Logicmaster 90-70 or Control. (Serial number required, valid subscription service not required)

0.500

Note: Requires a registered copy of VersaPro Professional Edition, Control or Logicmaster Series 90-70. Please provide serial number.

*

IC646MPPU03 Logic Developer - PLC Professional Edition, single license, Upgrade from VersaPro Standard Edition, Logicmaster 90-30. (Serial number required, with valid subscription service)

0.500

Note: Requires a registered copy of VersaPro Standard Edition or Logicmaster Series 90-30 with valid subscription service. Please provide serial number. Limited to one copy per license.

*

IC646MPPU33 Logic Developer - PLC Professional Edition, single license, Upgrade from VersaPro Standard Edition, Logicmaster 90-30. (Serial number required, valid subscription service not required)

0.500

Note: Requires a registered copy of VersaPro Standard Edition or Logicmaster Series 90-30. Please provide serial number. Limited to one copy per license.

*

LOGIC DEVELOPER -STATEIC646MSS101 Logic Developer -State Standard Edition, Single License, With Programming Cable. 0.500*IC646MSS001 Logic Developer -State Standard Edition, Single License, Software Only.................. 0.500*IC646MSS005 Logic Developer -State Standard Edition, 5 Pack....................................................... 0.500*

MOTION DEVELOPERIC800FXMODEV CIMPLICITY Motion Developer software for the S2K Series Amplifier/Controllers,

single license, software only0.500

Note: Communication cable is not included. Add SAFE for Machine Developer to receive free software version upgrades and unlimited calls to Technical Support Help Desk.

*


Item Status



(kg)


DEVELOPMENT SUITESAll development suites are bundled with a 1 year SAFE contract.

BC646MBL001 ME Lite Dev. Suite....................................................................................................... 0.500Note: Includes View Developer for Quickpanel, Logic Developer PLC Nano/Micro Edition -single license.

*

BC646MBS001 ME Standard Dev. Suite.............................................................................................. 0.500Note: Includes View Standard Developer (CE & QuickPanel), Logic Developer PC (CE), Logic Developer PLC Standard Edition, Logic Developer STATE Standard Edition and Motion Developer.

*

BC646MBP001 ME Professional Dev. Suite......................................................................................... 0.500Note: Includes View Professional Developer (NT/2000/XP, CE & QuickPanel), Logic PC Professional Developer (NT/2000/XP & CE), Logic Developer PLC Professional Edition, Logic Developer STATE Professional Edition and Motion Developer.

*

BC646MBW001 ME Professional Dev. Suite w/ Runtime...................................................................... 0.500Note: Includes View Professional Developer and Runtime 8000tag (NT/2000/XP, CE & QuickPanel), Logic PC Professional Developer and Runtime 8000tag (NT/2000/XP & CE), Logic Developer PLC Professional Edition, Logic Developer STATE Professional Edition and Motion Developer.

*

SAFE

Note: With CIMPLICITY Machine Edition SAFE you receive the following benefits: unlimited calls toTechnical Support Help Desk, free software version upgrades, all service pack product enhancements, and CIMPLICITY Machine Edition. The CIMPLICITY Machine Edition SAFE contract covers you for a period of one full year and is renewed on an annual basis. The Technical Support helpdesk is available for 3 callers, additional callers support may be purchased with part number IC648SAF000.

SAFE FOR LOGIC PC & VIEW DEVELOPMENT/RUNTIMESA648MDA075 SAFE for View Development/Runtime 75 I/O.............................................................. 2.978SA648MDA150 SAFE for View Development/Runtime 150 I/O............................................................ 2.978SA648MDA300 SAFE for View Development/Runtime 300 I/O............................................................ 2.978SA648MDA700 SAFE for View Development/Runtime 700 I/O............................................................ 2.978SA648MDA159 SAFE for View Development/Runtime 1500 I/O.......................................................... 2.978SA648MDB075 SAFE for Logic Developer PC with Runtime 75 I/O.................................................... 2.978SA648MDB150 SAFE for Logic Developer PC with Runtime 150 I/O.................................................. 2.978SA648MDB300 SAFE for Logic Developer PC with Runtime 300 I/O.................................................. 2.978SA648MDB700 SAFE for Logic Developer PC with Runtime 700 I/O.................................................. 2.978SA648MDB159 SAFE for Logic Developer PC with Runtime 1500 I/O................................................ 2.978SA648MDC075 SAFE for Logic Developer PC & View Development/Runtime 75 I/O......................... 2.978SA648MDC150 SAFE for Logic Developer PC & View Development/Runtime 150 I/O....................... 2.978SA648MDC300 SAFE for Logic Developer PC & View Development/Runtime 300 I/O....................... 2.978SA648MDC700 SAFE for Logic Developer PC & View Development/Runtime 700 I/O....................... 2.978SA648MDC159 SAFE for Logic Developer PC & View Development/Runtime 1500 I/O..................... 2.978


Item Status



(kg)


SAFE FOR LOGIC PC & VIEW DEVELOPMENT/RUNTIME HARD REAL TIMESA648MDD075 SAFE for Logic Developer PC with Runtime (HRT) 75 I/O.......................................... 2.978SA648MDD150 SAFE for Logic Developer PC with Runtime (HRT) 150 I/O........................................ 2.978SA648MDD300 SAFE for Logic Developer PC with Runtime (HRT) 300 I/O........................................ 2.978SA648MDD700 SAFE for Logic Developer PC with Runtime (HRT) 700 I/O........................................ 2.978SA648MDD159 SAFE for Logic Developer PC with Runtime (HRT) 1500 I/O...................................... 2.978SA648MDE075 SAFE for Logic Developer PC & View Development/Runtime (HRT) 75 I/O............... 2.978SA648MDE150 SAFE for Logic Developer PC & View Development/Runtime (HRT) 150 I/O............. 2.978SA648MDE300 SAFE for Logic Developer PC & View Development/Runtime (HRT) 300 I/O............. 2.978SA648MDE700 SAFE for Logic Developer PC & View Development/Runtime (HRT) 700 I/O............. 2.978SA648MDE159 SAFE for Logic Developer PC & View Development/Runtime (HRT) 1500 I/O........... 2.978

SAFE FOR LOGIC PC & VIEW RUNTIMESA648MRA075 SAFE for View Runtime 75 I/O.................................................................................... 2.978SA648MRA150 SAFE for View Runtime 150 I/O.................................................................................. 2.978SA648MRA300 SAFE for View Runtime 300 I/O.................................................................................. 2.978SA648MRA700 SAFE for View Runtime 700 I/O.................................................................................. 2.978SA648MRA159 SAFE for View Runtime 1500 I/O................................................................................ 2.978SA648MRB075 SAFE for Logic PC Runtime 75 I/O............................................................................. 2.978SA648MRB150 SAFE for Logic PC Runtime 150 I/O........................................................................... 2.978SA648MRB300 SAFE for Logic PC Runtime 300 I/O........................................................................... 2.978SA648MRB700 SAFE for Logic PC Runtime 700 I/O........................................................................... 2.978SA648MRB159 SAFE for Logic PC Runtime 1500 I/O......................................................................... 2.978SA648MRC075 SAFE for Logic PC & View Runtime 75 I/O................................................................. 2.978SA648MRC150 SAFE for Logic PC & View Runtime 150 I/O............................................................... 2.978SA648MRC300 SAFE for Logic PC & View Runtime 300 I/O............................................................... 2.978SA648MRC700 SAFE for Logic PC & View Runtime 700 I/O............................................................... 2.978SA648MRC159 SAFE for Logic PC & View Runtime 1500 I/O............................................................. 2.978

SAFE FOR LOGIC PC & VIEW RUNTIME HARD REAL TIMESA648MRD075 SAFE for Logic PC Runtime (HRT) 75 I/O................................................................. 2.978SA648MRD150 SAFE for Logic PC Runtime (HRT) 150 I/O............................................................... 2.978SA648MRD300 SAFE for Logic PC Runtime (HRT) 300 I/O............................................................... 2.978SA648MRD700 SAFE for Logic PC Runtime (HRT) 700 I/O............................................................... 2.978SA648MRD159 SAFE for Logic PC Runtime (HRT) 1500 I/O............................................................. 2.978SA648MRE075 SAFE for Logic PC & View Runtime (HRT) 75 I/O..................................................... 2.978SA648MRE150 SAFE for Logic PC & View Runtime (HRT) 150 I/O................................................... 2.978SA648MRE300 SAFE for Logic PC & View Runtime (HRT) 300 I/O................................................... 2.978SA648MRE700 SAFE for Logic PC & View Runtime (HRT) 700 I/O................................................... 2.978SA648MRE159 SAFE for Logic PC & View Runtime (HRT) 1500 I/O................................................. 2.978


Item Status



(kg)


SAFE FOR LOGIC DEVELOPER -PLCSA648MPM001 SAFE for Logic Developer -PLC Micro single license................................................. 0.500*SA648MPS001 SAFE for Logic Developer -PLC Standard single license............................................ 0.500*SA648MPS005 SAFE for Logic Developer -PLC Standard 5 Pack...................................................... 0.500*SA648MPS010 SAFE for Logic Developer -PLC Standard 10 Pack.................................................... 0.500*SA648MPS025 SAFE for Logic Developer -PLC Standard 25 Pack.................................................... 0.500*SA648MPS050 SAFE for Logic Developer -PLC Standard 50 Pack.................................................... 0.500*SA648MPSS50 SAFE for Logic Developer -PLC Standard 50 Seat Site License................................ 0.500*SA648MPSS99 SAFE for Logic Developer -PLC Standard Unlimited Seat Site License..................... 0.500*SA648MPP001 SAFE for Logic Developer - PLC Professional single license..................................... 2.978*SA648MPP005 SAFE for Logic Developer - PLC Professional 5 Pack................................................ 2.978*SA648MPP010 SAFE for Logic Developer - PLC Professional 10 Pack.............................................. 2.978*SA648MPP050 SAFE for Logic Developer - PLC Professional 50 Pack.............................................. 2.978*SA648MPPS50 SAFE for Logic Developer -PLC Professional 50 Seat Site License........................... 2.978*SA648MPPS99 SAFE for Logic Developer -PLC Professional Unlimited Seat Site License................ 2.978*SA648MPC001 SAFE for Logic Developer -PLC Configuration Tool single license............................. 0.500*

SAFE FOR LOGIC DEVELOPER -STATESA648MSS001 SAFE For Logic Developer -State Standard Single License....................................... 0.500SA648MSS005 SAFE For Logic Developer -State Standard 5 Pack.................................................... 0.500

SAFE FOR MOTION DEVELOPERSA648FXMODEV SAFE FOR CIMPLICITY Motion Developer

(IC646FXMODEV)............................0.500*

DEMONSTRATION CD PACKSIC646MED010 Machine Edition Demo 10 Pack.................................................................................. 2.978


Item Status



(kg)


BASE SYSTEM SERVERS DEVELOPMENT & RUNTIMEIC646TDV050 HMI Development Server - 50 I/O............................................................................... 0.800

Note: A standalone server does not support viewer nodes and cannot be networked with other servers.

IC646TDV075 HMI Development Server - 75 I/O............................................................................... 0.800IC646TDV150 HMI Development Server -150 I/O.............................................................................. 0.800IC646TDV300 HMI Development Server - 300 I/O............................................................................. 0.800IC646TDV700 HMI Development Server - 700 I/O............................................................................. 0.800IC646TDV915 HMI Development Server - 1500 I/O........................................................................... 2.978IC646TDV935 HMI Development Server - 35000 I/O......................................................................... 1.400IC646TDV000 HMI Development Server - Unlimited I/O.................................................................... 0.800

Note: Servers run on Windows NT/2000/XP operating systems on INTEL platforms. All systems include as standard Graphics, Alarm Management, Trending, Basic Control Engine (Visual Basic scripting), System Management Utilities, ODBC Data Logging, DDE Client, Advanced DDE Client, OPC Client and GE Fanuc PLC communications. A full I/O license is required to run multiple CIMPLICITY projects on the same server.Development Systems include run-time capability and system configuration capability.For local language : please contact product marketing.

I/O Point Count - points collected from devices (PLCs/CNCs) count toward the point count - virtual points (points created within CIMPLICITY only) are not counted, unless on a system used as an Enterprise server (Unlimited), in which case all points are counted.

GE Fanuc communications drivers include CCM2, Genius (requires PCIM board), Series 90 TCP/IP and SNP. Hot-standby PLC support for the 90-70 and 90-30 with TCP/IP communications is available.

For Upgrade to newer version: a SAFE contract is required to upgrade CIMPLICITY to latest release. Under SAFE contract or warranty period, go to www.cimplicityregistration.com to order the upgrade free of charge.

BASE SYSTEM SERVERS RUNTIME ONLYIC646TRT050 HMI Run Time Server - 50 I/O..................................................................................... 0.800

Note: A standalone server does not support viewer nodes and cannot be networked with other servers.

IC646TRT075 HMI Run Time Server - 75 I/O..................................................................................... 0.800IC646TRT150 HMI Run Time Server - 150 I/O................................................................................... 0.800IC646TRT300 HMI Run Time Server - 300 I/O................................................................................... 0.800IC646TRT700 HMI Run Time Server - 700 I/O................................................................................... 0.800IC646TRT915 HMI Run Time Server - 1500 I/O................................................................................. 1.135IC646TRT935 HMI Run Time Server - 35000 I/O............................................................................... 1.500IC646TRT000 HMI Run Time Server - Unlimited I/O.......................................................................... 0.800

Note: Runtime Systems include severall communication drivers. See "ADDITIONAL COMMUNICATION PROTOCOLS"


Item Status



(kg)


VIEWER NODESIC646TDV999 HMI Development Viewer............................................................................................ 0.800

Note: A Development server is required on the network.

IC646TRT999 HMI Run Time Viewer................................................................................................. 0.800IC646TRT999-5 HMI Run Time Viewer - 5 Pack................................................................................... 0.800

Note: Contain 1 Media kit and 5 licences.

*

IC646TRT999-10 HMI Run Time Viewer - 10 Pack................................................................................. 0.800Note: Contain 1 Media kit and 10 licences.

*

Note: Viewers run on Windows Me/98/NT/2000/XP operating systems on INTEL platforms.Viewer nodes are sent data by a server or several servers. They do not directly collect data from PLCs

Development & Runtime Viewers allow an operator to create screens, set values through the server to the PLC, acknowledge alarms, and perform project configuration on associated servers. Screens may be stored locally on the Viewer node or may be called across the network from an associated Server.

Runtime Only Viewers allow the display of screens (stored either locally on the Viewer, or called from a Server), alarm acknowledgement, and sending of set points to PLCs, but operators can not create additional screens nor can they use the Viewer node to configure projects on servers.

PRO SERVERS DEVELOPMENT & RUNTIMEIC646TPD075 HMI Pro Development Server - 75 I/O......................................................................... 0.014IC646TPD150 HMI Pro Development Server - 150 I/O....................................................................... 0.014IC646TPD300 HMI Pro Development Server - 300 I/O....................................................................... 0.014IC646TPD700 HMI Pro Development Server - 700 I/O....................................................................... 1.800IC646TPD915 HMI Pro Development Server -1500 I/O...................................................................... 0.014IC646TPD935 HMI Pro Development Server - 35,000 I/O.................................................................. 0.014IC646TPD000 HMI Pro Development Server - Full I/O....................................................................... 0.014

Note: CIMPLICITY Pro Server is a bundled package including the following options and drivers: Applicom, Allen-Bradley DF1, Allen-Bradley, Allen-Bradley RF Antenna, FloPro/FloNet, Mitsubushi TCP/IP, Johnson Controls N2, Omron Host Link, Honeywell IPC620, Sharp TCP/IP, Omron TCP/IP, Marquee, Mitsubishi Melsec, MODBUS RTU, Modbus TCP/IP, Square D, Smarteye, Seriplex I/O, Siemens TI, Toyopuc TCP/IP, Action Calendar, Recipe, System Sentry, SQL 1 Client User, Statistical Process Control, Terminal Services Single User, WebView Single User, VCR

PRO SERVERS RUNTIME ONLYIC646TPR075 HMI Pro Run Time Server - 75 I/O.............................................................................. 0.014IC646TPR150 HMI Pro Run Time Server - 150 I/O........................................................................... 0.014IC646TPR300 HMI Pro Run Time Server - 300 I/O........................................................................... 0.014IC646TPR700 HMI Pro Run Time Server - 700 I/O........................................................................... 0.014IC646TPR915 HMI Pro Run Time Server -1500 I/O.......................................................................... 0.014IC646TPR935 HMI Pro Run Time Server - 35,000 I/O...................................................................... 1.400IC646TPR000 HMI Pro Run Time Server - Full I/O........................................................................... 0.014

Note: CIMPLICITY Pro Server is a bundled package including the following options and drivers: Applicom, Allen-Bradley DF1, Allen-Bradley, Allen-Bradley RF Antenna, FloPro/FloNet, Mitsubushi TCP/IP, Johnson Controls N2, Omron Host Link, Honeywell IPC620, Sharp TCP/IP, Omron TCP/IP, Marquee, Mitsubishi Melsec, MODBUS RTU, Modbus TCP/IP, Square D, Smarteye, Seriplex I/O, Siemens TI, Toyopuc TCP/IP, Action Calendar, Recipe, System Sentry, SQL 1 Client User, Statistical Process Control, Terminal Services Single User, WebView Single User, VCR


Item Status



(kg)


ADDITIONAL COMMUNICATION PROTOCOLSIC646NAP000 APPLICOM Communications...................................................................................... 0.200

Note: No Charge on Runtime Systems.

IC646NEA000 Allen-Bradley Ethernet Communications..................................................................... 0.200Note: No Charge on Runtime Systems. Rockwell Software RSLinx is required. Allen-Bradley 1784-KTX interface card is required for Data Highway Plus.

IC646NDH000 Allen-Bradley Data Highway Plus................................................................................ 0.200Note: Allen-Bradley 1784-KT interface card is required,

IC646NDF000 Allen-Bradley DF1 Communications............................................................................ 0.100Note: No Charge on Runtime Systems.

IC646NRF000 Allen-Bradley RF Antenna Communications............................................................... 0.100IC646NEF000 Flopro FloNet Communications................................................................................... 0.200


IC646NGM000 Honeywell IPC620 Communications........................................................................... 0.100Note: No Charge on Runtime Systems.

IC646NGJ000 Johnson N2 Communications...................................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NMR000 Modbus RTU............................................................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NMD000 Modbus Plus................................................................................................................ 0.200Note: SA85 interface card is required.

IC646NMX000 Modbus TCP/IP Communications............................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NME000 Mitsubishi A-Serial Communications........................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NGB000 Mitsubishi TCP/IP Communications............................................................................ 0.200Note: No Charge on Runtime Systems.

IC646NGL000 Omron Host Link Serial Communications.................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NGT000 Omron Ethernet TCP/IP Communications................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NGS000 Sharp TCP/IP Communications................................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NTN000 Siemens TI Communications....................................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NSE000 Smarteye Communications......................................................................................... 0.200Note: No Charge on Runtime Systems.

IC646NSX000 Square D Seriplex I/O Communications...................................................................... 0.200IC646NQD000 Square D SyMax SyNet Communications................................................................... 0.200


IC646NTY000 Toyopuc TCP/IP Communications.............................................................................. 0.100


Item Status



(kg)


Note: GE Fanuc Drivers are included with all Servers systems to include: CCM-2, Genius requires PCIM Interface, DDE Client, Series 90 Ethernet with Redundancy support dor 90-30 & 90-70 Controllers, SNP/SNPX. Communication Drivers Free of charge on Runtime Servers, see notes. Please call your local GEF office or distributor.

CIMPLICITY® OPC ServersThe OPC Server provide an easy and standard connection to third party PLC. They can be purchased and used without CIMPLICITY® Plant Edition.

IC646NGU000 Gage Port/Mitotoyo OPC Server................................................................................. 0.200*IC646NMF000 Mitsubishi Melsec OPC Server.................................................................................... 0.200

Note: Support Mitsubishi MELSEC FX-Series PLCs over a serial link (front programming port).

*

IC646NMB000 Modbus Plus OPC Server........................................................................................... 0.200Note: Support Modicon devices over the high speed Modbus Plus network. The communications supports the use of bridges and multiplexors.

*

IC646NSG000 Siemens AS511 OPC Server...................................................................................... 0.200Note: Support Siemens S5 PLC’s over a serial link (programming port).

*

IC646NSJ000 Siemens MPI OPC Server........................................................................................... 0.200Note: Support Siemens S7 PLC’s over a serial link. This protocol allows communication with multiple PLC’s.

*

IC646NSF000 Siemens TCP/IP OPC Server...................................................................................... 0.200Note: Support Siemens S5 and S7 PLC’s through connected Ethernet Modules over an Ethernet LAN using the TCP/IP protocol.

*


Item Status



(kg)


PRODUCT OPTIONSIC646NCL000 Action Calendar........................................................................................................... 0.100

Note: Server and Viewer Option.

IC646NCN010 HMI for CNC................................................................................................................ 0.800Note: Separate CD Option. CNC I/O are not counted in the server I/O count. Purchase additional connections for each additional CNC.

IC646NCN020 HMI for CNC - Additional Connection.......................................................................... 0.800Note: Separate CD. Up to 7 additional connections on HSSB.

IC646NHD000 Historical Data Analyzer.............................................................................................. 0.200Note: Server and Viewer Option. No Charge on Runtime Systems.

IC646NDT000 Integrator's Toolkit....................................................................................................... 0.200Note: Server Development System Option. Includes : Point Management API, Alarm Management API, Device Communication Toolkit.

IC646NMP000 Multiprocessor support................................................................................................ 0.200Note: Purchased For Each Additional CPU Processor in Multiprocessor Intel NT Systems.

IC646NLS000 OPC Server Communication....................................................................................... 2.978IC646NMA000 Marquee...................................................................................................................... 0.200

Note: Server Option Only. No Charge on Runtime Systems.

IC646NPG000 Pager........................................................................................................................... 0.200Note: Order all nodes paged alarms are required from. Purchased for Viewers if remote configuration of paging needed.

IC646NRP000 Recipes........................................................................................................................ 0.200Note: Server and Viewer Option. No Charge on Runtime Systems.

IC646NRW000 Report Manager suite.................................................................................................. 0.100Note: Server Option. Generates and maintains reports. Includes a Report Manager Integrated Viewer for use on the Server.

IC646NRV000 Report Manager Integrated Viewer............................................................................. 0.100Note: Server or Viewer Option. Views reports generated by a Report Manager Suite package. (Must be purchase at least one Report Manager Suite for a Server).

IC646NSP000 Statistical Process Control (SPC)................................................................................ 0.200Note: Server and Viewer Option. No Charge on Runtime Systems.

IC646NHR000 Server Redundancy..................................................................................................... 0.100Note: Purchase once for each pair of redundant computers. Each server must be licensed for the same point count. The primary server must be a Development Server. The secondary server may be a run-time or development server. The following CIMPLICITY options are not supported in Server Redundancy configurations: SPC, Recipes, Historical Data Analyzer, and Tracker. Development Viewers cannot be used in Redundancy configurations. The following communication interfaces are supported with Server Redundancy: Series 90 TCP/IP, CCM-2, Genius, SNPX, Allen-Bradley Highway Plus, Applicom,DDE Client, Modbus Plus, Modbus RTU, and Modbus TCP/IP.

IC646NRX000 System Sentry, On node monitoring............................................................................ 0.100IC646NRX005 System Sentry, 5 nodes monitoring............................................................................. 0.100IC646NRX010 System Sentry, 10 nodes monitoring........................................................................... 0.100IC646NVC000 Visual CIMPLICITY Replay......................................................................................... 0.200

Note: Server and Viewer Option. Trending and Alarming is not supported. VCR is not supported under WebView, ThinView and Terminal Service.

*

IC646NGW000 WebGateway (Unlimited users)................................................................................... 0.200Note: Installed on a Microsoft Network Server and NT Server only.

#


Item Status



(kg)


IC646NWV000 WebView - Single License........................................................................................... 0.200IC646NWV005 WebView - 5 Pack Single License............................................................................... 2.978IC646NWV010 WebView - 10 Pack Single License............................................................................. 2.978IC646NWV025 WebView - 25 Pack Single License............................................................................. 0.200IC646NWV050 WebView - 50 Pack Single License............................................................................. 0.200IC646NWS999 ThinView software & License...................................................................................... 0.014

Note: Hardware must be purchased by customer.Supported Windows devices are:- Compaq iPaq H37 series- Fujitsu PenCentra 200Supported communication interfaces are:- Proxim PCMCIA CE card 7410 and Proxim Antenna Station 7520- GE CISCO Aironet 350 series

IC646NTS001 Terminal Services - Single User.................................................................................. 0.200Note: CIMPLICITY Terminal Services requires the Microsoft Windows 2000 Terminal Services license and Client Access Licenses (CALs). Licenses for Microsoft Terminal Services can be obtained from Microsoft distributors. Capacity Planning - Each remote Terminal Services user places a burden on the CIMPLICITY Server that is hosting and serving out the data. GE Fanuc recommends a separate dedicated CIMPLICITY Server (75 I/O Runtime) for more than 5 Terminal Services users. CIMPLICITY Terminal Services allows users on Windows 2000 computers to access the CIMPLICITY application on the Server. Screens and applications can be viewed and interacted with. Project maintenance and development can be performed remotely over the network.

IC646NTS005 Terminal Services - 5 Users........................................................................................ 0.200IC646NTS010 Terminal Services - 10 Users...................................................................................... 0.200IC646NTS025 Terminal Services - 25 Users...................................................................................... 0.200IC646NTS050 Terminal Services - 50 Users...................................................................................... 0.200

CIMPLICITY® SQLIC646NSL900 CIMPLICITY SQL 2000 Processor License................................................................. 0.014

Note: One processor license must be purchased for each processor in the server, regardless of whether the processor is running the SQL Server software. For example, if SQL Server 2000 is installed on one (1) four (4) CPU Server, four (4) processor licenses are required regardless of whether SQL Server 2000 is actually installed on all four (4) CPUs. Also note that you would be required to purchase the CIMPLICITY Multi-Processor Support License as well.

*

IC646NSL005 CIMPLICITY SQL 2000 5 Clients License................................................................... 0.225Note: Provides 5 Client Access Licenses (CALs) to Microsoft SQL Server. One Microsoft Server license is included at no charge. Package can be combined to increase the quantity of users supported.

IC646NSL010 CIMPLICITY SQL 2000 10 Clients License................................................................. 0.014Note: Provides 10 Client Access Licenses (CALs) to Microsoft SQL Server. One Microsoft Server license is included at no charge. Package can be combined to increase the quantity of users supported.

IC646NSL025 CIMPLICITY SQL 2000 25 Clients License................................................................. 0.014Note: Provides 25 Client Access Licenses (CALs) to Microsoft SQL Server. One Microsoft Server license is included at no charge. Package can be combined to increase the quantity of users supported.

CIMPLICITY® TRACKERPlease contact GE Fanuc for quotation.


Item Status



(kg)


UPGRADES - FUNCTIONALIC646NUU000 HMI Functional Upgrade Transaction Processing Fee................................................ TBD

Note: To upgrade for example a 150 I/O Run-time Server to a 300 I/O Development Server. A processing fee must be purchase with each license upgrade. Upgrade to Pro-Server is not possible. Contact your sales representative to get the details on how to upgrade.

UPGRADES - SOFTWARE VERSIONIC646TRW112 Report Manager Single Upgrade................................................................................. 0.100

Note: Report Manager 4.0 to 5.11.

IC646NCN001 HMI for CNC Version Upgrade Media only.................................................................. 0.800Note: Ordered only for HMI for CNC customers upgrading their HMI systems.

SAFE AND RENEWALSSA648TDV050 50 I/O Point Development System - (Stand Alone - No Networking).......................... 2.978SA648TDV075 75 I/O Point Development System.............................................................................. 2.978SA648TDV150 150 I/O Point Development System............................................................................ TBDSA648TDV300 300 I/O Point Development System............................................................................ 2.978SA648TDV700 700 I/O Point Development System............................................................................ 2.978SA648TDV915 1,500 I/O Point Development System......................................................................... 2.978SA648TDV935 35,000 I/O Point Development System....................................................................... TBDSA648TDV000 Unlimited I/O Point Development System................................................................... 2.978SA648TRT050 50 I/O Point Runtime System - (Stand Alone - No Networking).................................. 2.978SA648TRT075 75 I/O Point Runtime System...................................................................................... 2.978SA648TRT150 150 I/O Point Runtime System.................................................................................... 2.978SA648TRT300 300 I/O Point Runtime System.................................................................................... 2.978SA648TRT700 700 I/O Point Runtime System.................................................................................... 2.978SA648TRT915 1,500 I/O Point Runtime System................................................................................. 2.978SA648TRT935 35,000 I/O Point Runtime System............................................................................... TBDSA648TRT000 Unlimited I/O Point Runtime System........................................................................... 2.978SA648TDV999 Viewer Development System...................................................................................... TBDSA648TRT999 Viewer Runtime System.............................................................................................. 0.458SA648SAF000 CIMPLICITY SAFE GOLD Additional Caller................................................................ 2.978

Note: SAFE program must be purchased

SA648SAP000 CIMPLICITY SAFE Platinum....................................................................................... 2.978Note: CIMPLICITY SAFE Platinium provides 7x24 Emergency Supports and Priority Pager Support with 15 minute call back response to begin the problem solving process. SAFE program must be purchased

Note: With CIMPLICITY Plant Edition SAFE you receive the following benefits: unlimited calls to Technical Support Help Desk, free software version upgrades, all service pack product enhancements. The CIMPLICITY Plant Edition SAFE contract covers you for a period of one full year and is renewed on an annual basis. The Technical Support helpdesk is available for 3 callers, additional callers support may be purchased with part number SA648SAF000.This support plan covers systems at the latest software version and one major software version back. For those systems using software greater than one major release back, please contact Product maketing. For extended support, please contact GE Fanuc.


Item Status



(kg)


DEMONSTRATION CD PACKSIC646NDP000 CIMPLICITY HMI, DEMO Ten Pack in English........................................................... 0.800

Note: Version 6.0.

FR646NDP000 CIMPLICITY HMI, DEMO Ten Pack in French............................................................ 1.300Note: Version 4.0.

GE646NDP000 CIMPLICITY HMI, DEMO Ten Pack in German.......................................................... TBDNote: Version 3.2.

IT646NDP000 CIMPLICITY HMI, DEMO Ten Pack in Italian............................................................. TBDNote: Version 3.2.


Item Status

CIMPLICITY® APPLICOM COMMUNICATION


(kg)


APPLICOM BOARD COMMUNICATIONSAP646NET000 SCHNEIDER ETHWAY for CIMPLICITY HMI............................................................. TBD

Note: 1 Ethernet port and 1 optional serial port (PCI bus), connector types used : AUI 15 points, 10baseT (RJ45). Protocol: Ethway (Schneider) And Uni-TE.

AP646NFI000 SCHNEIDER FIPWAY for CIMPLICITY HMI............................................................... TBDNote: 1 WorldFIP port and 1 serial port (PCI bus), the WorldFip electrical interface is already included. If you want to use the serial port, then you have to add an electrical interface module and a serial protocol.

AP646NH1000 SIEMENS SINEC H1 for CIMPLICITY HMI................................................................. 2.750Note: 1 Ethernet port and 1 optional serial port (PCI bus), 3 connector types can be used : AUI 15 points, 10baseT (RJ45) and ITP (Siemens). Industrial Ethernet (ISO layer 4, for Siemens S5, S7 and TI), On TCP/IP Industrial Ethernet.

AP646NPB000 PROFIBUS FMS, DP for CIMPLICITY HMI................................................................ 0.450Note: 1 Profibus port For FDL for S5, DP, FMS, PPI+, MPI and S7 protocols (PCI bus). The Profibus RS485 (insulated) electrical interface is already included. If you want to use the serial port, then you have to add an electrical interface module and a serial protocol.

AP646NPP000 SIEMENS PPI, MPI, PPI+, S7 protocols for CIMPLICITY HMI................................... 0.800Note: 1 Profibus port for Siemens S7. Exclusively for PPI, PPI+, MPI and S7 protocols (PCI bus). FDL S5, DP and FMS protocols are not supported on the PC1500S7 board (See AP646NPB000 reference) The Profibus RS485 (insulated) electrical interface is already included.

AP646NPH000 PROFIBUS DP Only, 12 Mb port, for CIMPLICITY HMI............................................. 0.200Note: 1 Profibus port, protocol DP Only, 12 Mb (PCI bus). The Profibus RS485 (insulated) electrical interface is already included. If you want to use the serial port, then you have to add an electrical interface module and a serial protocol.

AP646NSS001 SIEMENS 3964/AS 511 (1 Port) for CIMPLICITY HMI................................................ 0.450Note: You need to purchase an electrical interface per port with this board, AP646Rxxx (PCI Bus).

AP646NSS002 SIEMENS 3964/AS511 (2 Ports) for CIMPLICITY HMI............................................... TBDNote: You need to purchase an electrical interface per port with this board, AP646Rxxx (PCI Bus).

AP646NSS004 SIEMENS 3964 (4 Ports) for CIMPLICITY HMI........................................................... TBDNote: You need to purchase an electrical interface per port with this board, AP646BRxxx (PCI Bus).

AP646NSU001 SCHNEIDER UNITELWAY (1 Port) for CIMPLICITY HMI.......................................... TBDNote: You need to purchase an electrical interface per port with this board, AP646Rxxx (PCI Bus).

AP646NSU002 SCHNEIDER UNITELWAY (2 Ports) for CIMPLICITY HMI........................................ TBDNote: You need to purchase an electrical interface per port with this board, AP646Rxxx (PCI Bus).

AP646NSU004 SCHNEIDER UNITELWAY (4 Ports) for CIMPLICITY HMI........................................ TBDNote: You need to purchase an electrical interface per port with this board, AP646BRxxx (PCI Bus).

Note: The preferred communication link is OPC Client with the Applicom board. OPC Server is provided with Applicom board. OPC Client is included in Base System. If OPC client is not used, the APPLICOM communication driver, IC646NAP000 must be purchased as a separated option for Development Systems only.


Item Status

CIMPLICITY® APPLICOM COMMUNICATION


(kg)


COMMUNICATIONS BOARD ACCESSORIESAP646BR4000 APPLICOM Interface, Remote serial panel for AP646NSS004 / AP646NSU004....... TBDAP646CAB000 APPLICOM Cable for PC 4000 to BR4000, BX4010 or BX4010R ( 1.5 meter )........ TBDAP646RPF000 APPLICOM Electrical Interface RS485, PROFIBUS board......................................... 0.008AP646RPF001 APPLICOM Electrical Interface RS485, PROFIBUS board (Galvanic insulation)....... TBDAP646RS2000 APPLICOM Electrical Interface RS232C, to use with all boards................................. 0.050AP646RS2001 APPLICOM Electrical Interface RS232C, to use with all boards(Galvanic

insulation).TBD

AP646RS4000 APPLICOM Electrical Interface RS485, to use with all boards.................................... 0.050AP646RS4001 APPLICOM Electrical Interface RS485, to use with all boards(Galvanic insulation)... TBDAP646RSC000 APPLICOM Electrical Interface Current loop, to use with all boards........................... 0.050


Item Status

VERSAPRO PROGRAMMING SOFTWARE


(kg)


VERSAPRO NANO/MICRO EDITIONIC640VPS002 VersaPro Nano/Micro Edition (VersaMax Nano/Micro, Series 90 Micro) with

Programming Cable0.600

Note: Supports VersaMax Nano, VersaMax Micro and Series 90 Micro and includes the programming cable (IC200CBL500).

The VersaMax Nano / VersaMax Micro PLC User's Manual (GFK-1645) and the VersaPro User's Guide (GFK-1670) are included on the VersaPro CD Rom in Adobe Acrobat (.pdf) format.

The software is pre-enabled and doesn't require registration.

IC641VPS002 VersaPro Nano/Micro Edition (VersaMax Nano/Micro, Series 90 Micro), software only

0.174

Note: Supports VersaMax Nano, VersaMax Micro and Series 90 Micro. The programming cable for VersaMax Nano/Micro (IC200CBL500) or Series 90 Micro (IC690ACC901) are not included.

The VersaMax Nano / VersaMax Micro PLC User's Manual (GFK-1645) and the VersaPro User's Guide (GFK-1670) are included on the VersaPro CD Rom in Adobe Acrobat (.pdf) format.

The software is pre-enabled and doesn't require registration.

VERSAPRO STANDARD EDITIONIC641VPS300 VersaPro Standard Edition (90-30, VersaMax) - single License, software only........ 0.750

Note: Supports VersaMax Nano, VersaMax Micro and all VersaMax CPUs, the entire family of Series 90 Micro and Series 90-30 as well as Serial (SNP) and Ethernet communication. GE Fanuc's InfoLink CD Rom Library for VersaMax PLC family, Series 90, Genius, Field Control, Operator Interfaces and motion control products is included (IC690CDR002). The serial programming cable and the mini-converter are not included.

The software requires registration for software authorization (site key).

IC641VPS300-ADP VersaPro Standard Edition (90-30, VersaMax) with SNP Mini-Converter and Cable - Single License

1.050

Note: Supports VersaMax Nano, VersaMax Micro and all VersaMax CPUs, the entire family of Series 90 Micro and Series 90-30 as well as Serial (SNP) and Ethernet communication. GE Fanuc's InfoLink CD Rom Library for VersaMax PLC family, Series 90, Genius, Field Control, Operator Interfaces and motion control products is included (IC690CDR002). Includes the serial programming cable and the mini-converter.


IC641VPS305 VersaPro Standard Edition (90-30, VersaMax) - 5 Pack........................................... 2.798IC641VPS310 VersaPro Standard Edition (90-30, VersaMax) - 10 Pack........................................... 5.472IC641VPS325 VersaPro Standard Edition (90-30, VersaMax) - 25 Pack........................................... 13.543IC641VPS350 VersaPro Standard Edition (90-30, VersaMax) - 50 Pack........................................... 27.600

Note: These VersaPro bundles contain multiple copies of Versapro and Infolink. To obtain the site key please contact the European Registration center (phone: +352 727979 -298 / fax:-351. Versapro runs with all features for 4 days without registration.

IC648VPM300 VersaPro Standard (90-30, VersaMax) - Annual Subscription Service - Single License

TBD

Note: The Subscription service provides software service packs and updates for 12 months from the date of purchase.


Item Status



(kg)


VERSAPRO PROFESSIONAL EDITIONIC641VPH700 VersaPro Professional Edition (90-70, 90-30, VersaMax) - Single License, with

Programming Cable0.750

Note: The serial programming cable and the mini-converter are included (HE693SNPCBL). The software requires registration for software authorization (site key).

IC641VPP700 VersaPro Professional Edition (90-70, 90-30, VersaMax) - Single License, software only

0.750

Note: The serial programming cable and the mini-converter are not included.


IC641VPP705 VersaPro Professional Edition (90-70, 90-30, VersaMax) - 5 Pack License............... TBDNote: The serial programming cable and the mini-converter are not included. The software requires registration for software authorization (site key).

IC641VPP710 VersaPro Professional Edition (90-70, 90-30, VersaMax) - 10 Pack License............. 1.764Note: The serial programming cable and the mini-converter are not included. The software requires registration for software authorization (site key).

IC641VPP750 VersaPro Professional Edition (90-70, 90-30, VersaMax) - 50 Pack License............. 1.764Note: These VersaPro bundles contain multiple copies of Versapro and Infolink. To obtain the site key please contact the European Registration center (phone: +352 727979 -298 / fax:-351. Versapro runs with all features for 4 days without registration.The serial programming cable and the mini-converter are not included.


IC648VPM700 VersaPro Professional Edition (90-70, 90-30, VersaMax) Subscription Service - 1 License

TBD


*

PRODUCT OPTIONSIC641VPSCAM VersaPro Cam Editor................................................................................................... 0.174

Note: The Versapro CAM Editor enables the user to create and download CAM profiles to the Motion Mate DSM314 Motion Controller IC693DSM314. Requires VersaPro 1.5 or greater.

IC641CFG100 VersaPro Remote I/O Manager................................................................................... 0.250Note: Does not include cable IC200CBL002.

IC641CFG110 VersaPro Remote I/O Manager with cable (IC200CBL002)........................................ 1.764IC641CFG200 VersaPro Remote I/O Manager Branding Toolkit........................................................ 1.764

Note: This product allows the end user to brand the Remote I/O Manager. It enables the editing of text strings which appear in messages and replace them with custom text.

DEMO PACKAGESIC641VPD010 VersaPro Distributor Demo - 10 Pack......................................................................... 0.400IC641VPD050 VersaPro Distributor Demo - 50 Pack......................................................................... 2.040

Note: VersaPro Demo Packages are intended to be used for customer evaluation. The VersaPro demo runs for 4 days. The disks are packages in a cardboard envelope suitable for mail.


Item Status



(kg)


UPGRADE SERVICEIC641VUG301 Upgrade from Logicmaster 90-30 or Control 90-30 to VersaPro Standard Edition

(IC641VPS300)0.750

Note: This upgrade allows registered customers that use currently Logicmaster 90-30 or Control 90-30 to purchase VersaPro (IC641VPS300) at a discounted rate. VersaPro allows users of Logicmaster and Control to import their existing programs.

IC641VUG701 Upgrade from Logicmaster 90-70 Subscription Service to VersaPro Professional Edition

1.764

Note: This upgrade allows registered customers that use currently Logicmaster 90-70 or Control 90-70 to purchase VersaPro (IC641VPP700) at a discounted rate. VersaPro allows users of Logicmaster and Control to import their existing programs.

IC641VUG703 Upgrade from VersaPro Standard edition to VersaPro Professional Edition............... 1.764IC641VUG002 Upgrade Kit for VersaPro NanoMicro Edition to current revision................................ TBD

Note: Please provide proof of purchase.

IC648VPM300 VersaPro Standard (90-30, VersaMax) - Annual Subscription Service - Single License

TBD


IC648VPM700 VersaPro Professional Edition (90-70, 90-30, VersaMax) Subscription Service - 1 License

TBD


*

Note: GE Fanuc provides a free 90-day software upgrade (subscription) service for registered VersaPro users.

DOCUMENTATIONGFK-1670 VersaPro User's Manual - English............................................................................... 0.373GFK-1670-FR VersaPro User's Manual - French............................................................................... 0.310

Note: French translation currently covers configuration and programming of VersaMax PLC as well as the entire Series 90-30 family - in line with VersaPro Version 1.02

GFK-1670-GE VersaPro User's Manual - German............................................................................. TBDNote: German translation currently covers configuration and programming of VersaMax PLC as well as the entire Series 90-30 family - in line with VersaPro Version 1.02

GFK-1670-IT VersaPro User's Manual - Italian................................................................................. TBDNote: Italian translation currently covers configuration and programming of VersaMax PLC as well as the entire Series 90-30 family - in line with VersaPro Version 1.02

GFK-1670-SP VersaPro User's Manual - Spanish............................................................................. TBDNote: Spanish translation currently covers configuration and programming of VersaMax PLC as well as the entire Series 90-30 family - in line with VersaPro Version 1.02

IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field Control, Operator Interfaces and motion control products. Includes one year subscription service for free upgrades with product registration.




Item Status

CONTROL PROGRAMMING SOFTWARE


(kg)


ONLINE PROGRAMMING PACKAGESIC641CTL970 Control 90-70 Programmer with CD-ROM Documentation......................................... 2.350

Note: Provides Relay Ladder Diagram programming for Series 90-70 controllers over SNP and TCP/IP.

M0802

IC641CTL990 Control Professional Developer Package.................................................................... 2.350Note: Provides Relay Ladder Diagram and Sequential Function Chart programming as well as all available compilers for VersaMax CPU001, Series 90-30 CPU350 or higher and Series 90-70 controllers over SNP and TCP/IP.

M0802

Note: The Control User's Guide (GFK-1295) and the InfoLink CD-ROM (IC690CDR002) are included in each package. The RS232/485 mini-converter and cable package (IC690ACC901) is not included.

The following manuals are recommended for the Control programming software: GFK-1411 Series 90-30 System ManualGFK-1192 Series 90-70 System Manual

Other editors are available as options. The C-Toolkit (IC641SWP709) is required to create C Program Blocks for the Series 90-30 or Series 90-70.

OFFLINE PROGRAMMING PACKAGESIC641CTL901 Control Offline Programmer......................................................................................... 1.563

Note: Provides offline Relay Ladder Diagram and all available compilers for VersaMax CPU001, Series 90-30 CPU350 or higher and Series 90-70 controllers, but can NOT load, store or communicate with the PLCs.

M0802

IC641CTL904 Control Professional Offline Developer Kit.................................................................. 2.000Note: Provides offline Relay Ladder Diagram and Sequential Function Chart programming as well as all available compilers for VersaMax CPU001, Series 90-30 CPU350 or higher and Series 90-70 controllers, but can NOT load, store or communicate with the PLCs.

M0802

DEMO AND EVALUATION PACKAGESIC641CTL991 Control Distributor Demo Pack (10 Demo CDs).......................................................... 2.150

Note: Provides 10 CDs for customer promotions and product evaluations. The software runs in demo mode.

M0802

IC641CTL993 Control Evaluation Kit.................................................................................................. 1.588Note: 30 day lincense that allows unrestricted use of the Relay Ladder Diagram and Sequential Function Chart programming for VersaMax CPU001, Series 90-30 CPU350 or higher and Series 90-70 controllers over SNP and TCP/IP.

M0802

Note: The RS232/485 mini-converter and cable package (IC690ACC901) is not included.

OPTION AND TARGET UPGRADESIC641CTL972 Control Upgrade to add 90-70 Target Support to a Control License........................... 1.764

Note: Adds Series 90-70 support to an existing Control 90-30 license.

M0802

ACCESSORIESIC690ACC901 RS-232 to RS-422/485 Miniconverter with programming cable (Consists of


IC693CBL316 RS-232 Communication Cable (DB-9 to RJ11)........................................................... 0.141Note: This cable is required for connecting the RS-232 port of the DSM to the PC. This cable can also be used on the CPU351/352 as well as on the Ethernet interface. When using DSM314, this cable is only required for flash firmware upgrades.


Item Status

CONTROL PROGRAMMING SOFTWARE


(kg)


DOCUMENTATIONGFK-1295 Control User's Guide................................................................................................... TBDIC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095





Item Status

LOGICMASTER PROGRAMMING SOFTWARE


(kg)


SERIES 90 MICRO LOGICMASTER SOFTWAREIC640HWP300 Logicmaster Series 90 Micro PLC DOS Programming Software, Cable & Manuals... 2.811IC641LKF300 Logicmaster Series 90 Micro - French Language Option Kit....................................... TBDIC641LKG300 Logicmaster Series 90 Micro - German Language Option Kit..................................... TBDIC641LKS300 Logicmaster S90 Micro - Spanish Language Option Kit.............................................. TBDEB640HWP100 EDOPS 2plus for Series 90 Micro Programming Software, Cable & Manuals............ 5.300

Note: The following manuals are recommended for the Series 90 Micro Software:GFK-0466 Logicmaster 90, Series 90-30/20/Micro Programming Software User's ManualGFK-0467 Series 90-30/20/Micro Programmable Controllers Reference ManualGFKE-0001 EDOPS 2plus for Series 90 Micro Programming SoftwareGFK-1670 VersaPro User's Manual

SERIES 90-30 LOGICMASTER SOFTWAREIC640HWC306 Logicmaster 90-30/20/Micro serial with ACC900 and Cables, CD Rom Library......... 0.091IC640HWP306 Logicmaster 90-30/20/Micro serial with ACC900 and Cables, Paper Library.............. 2.500IC641SWC306-ADP Logicmaster 90-30/20/Micro serial with ACC901, CD Rom Library............................. 4.000IC641SWM306-ADP Logicmaster 90-30/20/Micro serial with ACC901, Paper Library................................. 15.100IC641LKF306 Logicmaster 90-30/20/Micro - French Language Option Kit....................................... TBDIC641LKG306 Logicmaster 90-30/20/Micro - German Language Option Kit...................................... 3.650IC641LKS306 Logicmaster 90-30/20/Micro - Spanish Language Option Kit...................................... TBDIC641SWC316 Logicmaster 90-30 Ethernet for NT/Win95, CD Rom Library...................................... 0.950IC641LKF316 Logicmaster 90-30 Ethernet for NT/Win95 - French Language Option Kit................. TBDIC641LKG316 Logicmaster 90-30 Ethernet for NT/Win95 - German Language Option Kit................ TBDIC641LKS316 Logicmaster 90-30 Ethernet for NT/Win95 - Spanish Language Option Kit................ TBDIC641SWP311 SFC Editor and Debugger Add-In for Logicmaster 90-30............................................ 0.450IC641VUG301 Upgrade from Logicmaster 90-30 or Control 90-30 to VersaPro Standard Edition

(IC641VPS300)0.750

Note: This upgrade allows registered customers that use currently Logicmaster 90-30 or Control 90-30 to purchase VersaPro (IC641VPS300) at a discounted rate. VersaPro allows users of Logicmaster and Control to import their existing programs.

Note: All IC641SWCxxx/IC640HWCxxx packages include IC690CDR002 Infolink CD-ROM documentation. All IC641SWM3xx include IC693LBR301 library of Series 90-30 paper manuals.

SERIES 90-30 LOGICMASTER UPGRADE SERVICEIC641SUG306 Upgrade Kit Logicmaster 90-30/20 Serial.................................................................... 2.180IC641SUG316 Upgrade Kit Logicmaster 90-30 Ethernet, NT/Win95.................................................. 2.184

SERIES 90-30 HOT BACKUP PROGRAMMING SOFTWARETM693SWP202 Trimation HBR30 (512 I/O)..........................................................................................TM693SWP203 Trimation HBR30 (2048 I/O)........................................................................................ 0.500


Item Status

LOGICMASTER PROGRAMMING SOFTWARE


(kg)


SERIES 90-70 LOGICMASTER SOFTWAREIC640HWC706 Logicmaster 90-70 serial with ACC901, CD Rom Library........................................... 0.613

Note: Serial and Ethernet 90-70 packages requires DOS 5.0 or Memory Management Software.

IC640HWP706 Logicmaster 90-70 serial with ACC901, Paper Library................................................ 14.901Note: Serial and Ethernet 90-70 packages requires DOS 5.0 or Memory Management Software.

IC641LKF706 Logicmaster 90-70 - French Language Option Kit....................................................... TBDIC641SWC716 Logicmaster 90-70 Ethernet TCP/IP for NT/Win95, CD Rom Library.......................... 1.540IC641SWP731 SFC Editor and Debugger Add-In for Logicmaster 90-70............................................ 0.032

Note: All IC641SWCxxx/IC640HWCxxx packages include IC690CDR002 Infolink CD-ROM documentation. All IC641SWM7xx/IC640HWP7xx include IC697LBR701 library of Series 90-70 paper manuals.

SERIES 90-70 GMR PROGRAMMING SOFTWAREIC641SWP715 Genius Modular Redundancy Software (GMR) Programming Software (Phase 3)..... 0.675



SERIES 90-70 LOGICMASTER UPGRADE SERVICEIC641SUG706 Upgrade Kit Logicmaster 90-70 Serial......................................................................... 0.907IC641SUG716 Upgrade Kit Logicmaster 90-70 Ethernet TCP/IP for NT/Win95................................. 0.907


Item Status

OTHER CONTROLLER SOFTWARE


(kg)


C TOOLKITSIC641SWP709 C Programmer's Toolkit for Series 90 PLCs, Standard............................................... 0.655



M0802


M0802


HOST COMMUNICATION TOOLKITSIC641SWP080 Host Drivers for Windows 95/NT (Ethernet SRTP) - Qty. 1......................................... 0.018

Note: Host Drivers for Windows 95/NT contains an interface between the TCP/IP or SNP communications software and the Toolkit for Windows 95/NT C/C++ Applications (IC641SWP058). The IC641SWP080 catalog number includes one runtime license (GFJ-0317) for a single machine. The IC641SWP081 product is provided as a convenience to users requiring use of the Host software on multiple platforms.

M0802


M0802

OTHER SOFTWAREIC641SWP042 SNP Object code DOS driver, Multi User License....................................................... 0.032 M0802IC641SWP061 PCM Development Software....................................................................................... 2.145 M0802IC641SWP063 PCM Support Software................................................................................................ 0.398 M0802IC651ENS042 Series 90-70 TCP/IP/Ethernet Software for IC697CMM741....................................... 0.733# M1102


Item Status

TECHNICAL DOCUMENTATION


(kg)


TECHNICAL DOCUMENTATIONGFK-xxxx VersaMax/Series 90-30/20/Micro Manuals (per manual)............................................GFK-yyyy Series 90-70 Manuals (per manual)............................................................................GFS-xxx Training Manual (per manual).....................................................................................IC693LBR301 Series 90-30 Paper Manuals Library........................................................................... 14.492IC697LBR701 Series 90-70 Paper Manuals Library........................................................................... 14.424PM100LBR001 Alpha + Beta Drives Manuals Library.......................................................................... TBD


IC690CDR002 InfoLink CD Rom Library Product Information Library - Single License...................... 0.095Note: Contains product documentation for VersaMax PLC family, Series 90, Genius, Field Control, Operator Interfaces and motion control products. Includes one year subscription service for free upgrades with product registration.



IC690CDR003 Legacy CD Rom Library Product Information Library - Single License....................... 0.142Note: Contains product documentation for all legacy products like Series One, Series Five and Series Six.

IC690CDR004 InfoLink & Legacy CD Rom Library Product Information Library - Single License...... 0.142Note: Contains two CDs (IC690CDR002 and IC690CDR003). Includes one year Infolink subscription service for free upgrades with product registration.


Item Status

SERVICES FOR AUTOMATION EQUIPMENT & FACTORY IT


(kg)


CUSTOMER SUPPORT RATESEU648SRV001 Hourly Rate for customer support (Monday to Friday 8:00 a.m. - 5:00 p.m.).............. TBDEU648SRV002 Rate for Overtime and customer site support

(Monday to Friday 5:00 p.m.- 8:00 a.m.,working on weekend and public holidays)TBD

Note: A minimum of 4 hours will be charged per service.

T&L including local GE Fanuc per diem rates will be charged at cost +10%.

Time spent for travelling will be considered as working time.


Date post:	07-Apr-2015
Category:	Documents
Upload:	muhyazid
View:	3,229 times
Download:	10 times

GE Fanuc Pricelist

Documents