Date post: | 01-Dec-2015 |
Category: |
Documents |
Upload: | suhas-acharya |
View: | 224 times |
Download: | 5 times |
Throughout our 100-year history, GE Lighting has been committed to extending the life of lamps, increasing overall lighting efficiency and reducing energy consumption. We achieve this through our innovation, spirit and unremitting efforts that we inherited from our founder, Thomas Edison. GE Lighting divides it's business into three areas, Light Emitting Diodes (LED's), Lamps and Fixtures. Combining a professional background with our market leadership in Lighting, LED has emphasis on providing a complete set of world leading LED systems and solutions that focus on environmental sustainability. Our range of LED lighting systems include sinage, architectural lighting, transportation lighting, displaying lighting and general lighting. Our lamp business covers the complete range of lamp varieties including incandescent, halogen, fluorescent, compact fluorescent, high intensity discharge, automotive and specialty lighting. GE Specialty lighting manufactures products for the aircraft and transportation industries along with projector lamps which satisfy front, rear and video projection, medical, architectural, fibre optic, stage & studio, entertainment and theatre lighting. The business also covers a wide range of lighting systems, including commercial lighting, industrial lighting, roadway and tunnel Lighting, flood lighting, area lighting and ballasts. All of our lighting products are in accordance with Six Sigma control insuring that GE's lighting products are of the highest quality standards offering unlimited lighting and enjoyment.
About GE Lighting
I find out what the world needs,then I proceed to invent it.
Thomas Edison
ECOMAGINATION WORDINGMAKING RENEWABLE ENERGY A REALITY.
2X2010 � 15
25%
4.Reduce water use and improve water reuse
1. Continue to increase revenue from ecomagination products
17
2005 2009
80+
2. Double investment in R&D
50%
3. Reduce greenhouse gas emissions and improve energy efficiency of GE
5.Keep the public informed
2010 2015
$10B
ECOMAGINATION WORDINGMAKING RENEWABLE ENERGY A REALITY.
2X2010 � 15
25%
4.Reduce water use and improve water reuse
1. Continue to increase revenue from ecomagination products
17
2005 2009
80+
2. Double investment in R&D
50%
3. Reduce greenhouse gas emissions and improve energy efficiency of GE
5.Keep the public informed
2010 2015
$10B
GE Lighting will lead a global lighting revolution to deliver innovative
solutions that change the way people light – and think about – their world.
For over 130 years, we’ve continued to
innovate what has yet to be imagined
Our Vision
COMMERCIAL INDOOR LIGHTING 09-40
RETAIL LIGHTING 43-51
INDUSTRIAL LIGHTING 53-69
ROADWAYS & ENVIRONMENTAL LIGHTING 71-89
SPORTS & AREA LIGHTING 91-103
LED LIGHTING 105-130
ACCESSORIES 133-142
GLOSSARY OF TERMS 143-144
CAP DRAWINGS 145-146
LAMP DATA 147-151
ANNEXURE-I 152-152
ANNEXURE-II 153-158
ANNEXURE-III 159-159
ANNEXURE-IV 160-161
ANNEXURE-V 162-163
ANNEXURE-VI 164-164
Inde
x
LTDCLight technology and Design Centre, Bangalore
God said, “Let there be light”, and we invented the first-ever commercial bulb. This illustrates our willingness to go to any extent in fulfilling our customers’ needs. Breaking norms, setting standards, and being a leader epitomizes the spirit of GE. Providing breakthroughs in lighting technology time and again has resulted in the setting up of LTDC (Light Technology & Design Center), a research and development wing. With our facilities that are world class, LTDC drafts a new chapter in innovation and design of our lighting division.
LTDC houses a comprehensive range of test equipments to ascertain our products’ efficiency and performance according to the Six Sigma Methodology. In addition to the photometry tests conducted here, the lab also incorporates a host of other testing facilities like electrical performance, ambient performance for heat, humidity, dust and water ingress.
Some of the new features that have been added to this centre are:
• World-class testing facilities and technologically superior testing equipments.
• The key testing equipment installed in the lab have been custom designed with state-of-the-art automation technology.
• A novel concept has been included where our customers not only get a glimpse of the new products, but also get a chance to experience world-class technology used in developing these products.
GE has always been in the forefront of imagination and innovation, and this endeavor of setting up LTDC bears testimony to this. With our LTDC lab acheiving NABL (National Accreditation Board for Testing and calibration) accreditation, we are now in a position to provide the customer with realiable testing and calibration services on order to meet their demands in a competent laboratory.
The following are the key testing equipment Installed at LTDC. These equipments are unique among the conventional equipments because of the state- of-the-art automation technology. These equipments are designed to carry out the tests as per Indian and international standards.
Mirror Goniophotometer
Rain Test Equipment
Thermal Test Equipment
Electrical test bench
Dust Chamber
Humidity Chamber
Life test chamber
Spectroradiometrics for LM79 measurement
indoor lightingcommercial
indoor lightingcommercial
COMMERCIAL INDOOR LIGHTING
PRISTINE RECESS 11
SKIA 12
SILIA 13
SIRIA / SIRIA FENCE 14
STEALTH 15
STERNO 16
CADENCE III / CADENCE IV 17
VIGOR / VIGOR-DL 18
PROLIX 19
PROLIX-P5 / PROLIX-DL 20
POISE 21
SEQUIN 22
CADENCE ll / CADENCE-T5 23
FLINCH C 24
DUET VX 25
ONO & ONO T5 26
PRISTINE SURFACE & PENDANT 27
AARON 28
EILEEN 29
LMS BATTEN 30
DOWNLIGHTER RANGE
BROW LH 31
LDDL 32
ACME 33
STREW LH 34
TURBO XL 35
CMH/LED DL-ADJ 36
MORSEL 37
LENTO 38
MINT 39
ARIA 40
11
PRISTINE RECESS
Description Recess mounted luminaire suitable for T5 lamps suitable for
mounting in 2x2 grid ceiling as well as POP/Gypsum ceiling
Specifications&Features• Housing made of CRCA Sheet in white epoxy powder
coated
• Mini yet efficient anodised aluminium reflector
• Available in recessed, suspended and surface version
• High frequency electronic ballast
• Termination by 3 way, 10A, PBT connector
• Push fit polycarbonate lamp holders
• Suitable for modular / armstrong ceiling for recessed type
Installation• To be mounted on extended T-bar of false ceiling
• Suspension using hooks or chains
Maintenance• Lamps and ballast can be replaced by gently pulling out
mirror
Applications• Offices
• Banks
• Hotels
• Hospitals
Compliance • IP20
• Class I
PRISTINE RECESS ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
Voltage (V)
Mains Current
(A)Ballast Weight (kg) PF Ordering Code
PFR 414 MiO 4X14 W T5 FTL 240 0.29A HF <10% APFC 3.8 >0.98 L2536
PFR 228 MiO 2X28 W T5 FTL 240 0.26A HF <10% APFC 2.2 >0.98 L2534
PFR 214 MiO 2X14 W T5 FTL 240 0.15A HF <10% APFC 1.2 >0.98 L2535
PRISTINE RECESS PRISTINE RECESS
594
158
67
Pristine Recess 2X14
1195Pristine Recess 2X28
158
67
Pristine 4X14 (Recess)
595
595
55
12
SKIA
Description Indoor commercial recess mounted luminaire suitable for
T5 fluorescent lamp
Specifications&Features• Housing made of CRCA Powder coated in white with
embossed pattern on reflecting surface
• Injection moulded diffused acrylic refractor at the side
• Anodized aluminium reflector available in glossy finish
• High frequency electronic ballast
• Termination by 3 way, 10 A, PBT connector
• Push fit poly-carbonate lamp holders
• Suitable for modular, armstrong ceiling
Installation• Suspension mounting with 4 mounting brackets
• Cable entry is through grommet of 19 mm dia. hole
Maintenance• Lamps and ballast can be replaced by gently pulling out
mirror & side diffuser
Applications• Offices
• Banks
• Hotels
• Hospitals
Compliance• IP20
• Class I
SKIA SKIA
SKIA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
SAR414 4 x 14W FTL T5 240 0.29 HF, 4x14W, 176-265V NA NA 0.99 L2322
SAR424 4 x 24W FTL T5 240 0.38 HF, 4x24W, 176-265V NA NA 0.99 L2324
13
SILIA
Description• Indoor commercial recess mounted luminaire suitable for
T5 fluorescent lamps
Specifications&Features• Housing made of CRCA Powder coated in white with
embossed pattern on reflecting surface.
• Refractor : Injection moulded diffused acrylic refractor at the side
• Anodized aluminium reflector available in glossy finish
• High frequency electronic ballast
• Termination by 3 way, 10 A, PBT connector
• Push fit poly-carbonate lamp holders
• Suitable for modular, armstrong ceiling
Installation• Suspension mounting with 4 mounting brackets
• Cable entry is through grommet of 19 mm dia. hole
Maintenance• Lamps and ballast can be replaced by gently pulling out
mirror & side diffuser
Applications• Offices
• Banks
• Hotels
• Hospitals
Compliance• IP20
• Class I
SILIA SILIA
String Mounting provision provided with hole dia 10 mm
595
595
117
106
SILIA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
SIL314 3 x 14W FTL T5 240 0.20 HF, 3x14W, 176-265V NA NA 0.99 L2401
SIL324 3 x 24W FTL T5 240 0.33 HF, 3x24W, 176-265V NA NA 0.99 L2400
14
SIRIA / SIRIA FENCE
Description Indoor commercial recess mounted luminaire suitable for
T5 fluorescent lamps & CFL lamps
Specifications&Features• Housing made of CRCA powder coated in white with
embossed pattern on reflecting surface
• Injection moulded diffused acrylic refractor at the side
• Anodized aluminium reflector available in glossy finish
• Also available with fence optics version
• High frequency electronic ballast
• Termination by 3 way, 10 A, PBT connector
• Push fit poly-carbonate lamp holders
• Suitable for modular, armstrong ceiling
Installation• Suspension mounting with 4 mounting brackets
• Cable entry is through grommet of 19 mm dia. hole
Maintenance• Lamps and ballast can be replaced by gently pulling out
mirror & side diffuser
Applications• Offices
• Banks
• Hotels
• Hospitals
Compliance• IP20
• Class I
SIRIA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
SIR314 3 x 14W FTL T5 240 0.20 HF, 3x14W, 176-265V NA NA 0.99 L2411
SIR314 FENCE 3 x 14W FTL T5 240 0.20 HF, 3x14W, 176-265V NA NA 0.99 L2412
SIR236 FENCE 2 x 36W CFL HLBX 240 0.30 HF, 2x36W, 176-265V NA NA 0.95 L2416
SIRIA SIRIA
String Mounting provision provided with hole dia 10 mm
595
595
88
SIRIA FENCE
SIRIA FENCE
Cutout dimension 575 x 575 mm
String Mounting provision provided with hole dia 8m
595
595
m
88
15
Description Indoor commercial recess mounted luminaire, suitable for
600mm armstrong modular metal ceiling
Specifications&Features• Fusion of MLC optics and double asymmetric prismatic
refractor optics
• Hybrid optics has reflector made of pre-anodized imported aluminum sheet
• Aesthetically designed, colored end caps made of SAN, adds the refreshingly new design flairs to stealth supreme
• Color options : Orange & blue
• Refractor wings are extruded from acrylic satin material
• The curved shallow housing is fabricated from CRCA MS sheet in white epoxy powder coat
• Acrylic lock for side wings
• Stainless steel locking for reflectors
• HF ballast and lamp holders are pre-wired up to terminal block
• Suitable for modular, armstrong ceiling
Installation• Suspension mounting is done with 4 mounting brackets
with 8 mm diameter holes
• Cable entry is done through EPDM grommet of 18mm diameter hole provided on the housing
Maintenance• Lamps from MLC reflector can be accessed by pulling the
locking clips at the reflector
• Lamps from refractor compartment can be accessed by pulling the acrylic lock
Applications• Office areas
• Conference rooms
• Reception areas
• Recreational areas
Compliance• IP20
• Class I
STEALTH ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
SR414 4 x 14W FTL T5 240 0.29 HF, 4x14W, 176-265V NA NA 0.99 L1971A
STEALTH STEALTH
String Mounting provision provided with hole dia 8mm
595
595
87
STEALTH
16
Description Indoor commercial recess mounted luminaire suitable for
T5 fluorescent lamps
Specifications&Features• Housing made of CRCA with white powder coated
• Border element made of extruded aluminum which is elegantly designed, gives aesthetic appearance
• Matt finish acrylic satin diffuser for soft and diffused light
• Acrylic satin diffuser wings at the side, acts as the refractor
• Termination by 3 way, 10A PBT connector
• Push fit poly-carbonate lamp holder
• Compatible with lighting control accessories
• Suitable for 600mm x 600mm armstrong ceiling
Installation• Recess mounted where the ceiling surface protrude down
approximately 10mm from the T section
• Cable entry through grommet of 19mm dia
Maintenance• Tele-drop mechanism for easy and effective maintenance
• Remove screws for lamp and ballast replacement
Applications• Offices
• Conference rooms
• School and lecturer rooms
• Retail
• Hospital and clinics
• Hotels and restaurants
Compliance• IP20
• Class I
STERNO ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
SOC414 4 x 14W FTL T5 240 0.29 HF, 4x14W, 176-265V NA NA 0.99 L2225
SOC224 2 x 24W FTL T5 240 0.22 HF, 2x24W, 176-265V NA NA 0.99 L2226
STERNO STERNO
STERNO
17
CADENCE III / CADENCE IV
Description Indoor commercial, recess mounted, dark light mirror optics
(CAT-II) luminaire, suitable for compact fluorescent lamp
Specifications&Features• Has compact housing height of 75mm, aesthetic circular
perforation cover, high efficiency mirror optics, parabolic side reflector and MLC louvers
• Glare and beam are controlled by uniform optical performance as per CAT-II specification, CIBSE (Charted Institute of Building Services) LG3, 1995
• Pre-wired with vacuum pressure impregnated copper wound ballast, power factor improvement capacitor, push fit type lamp holders and mains connector
• Available with high frequency electronic ballast
• Housing made of CRCA MS sheet in white epoxy powder coat
• Center perforation plate is made of CRCA MS sheet in white epoxy powder coat
• Mirror assembly is made of high purity anodized aluminum
• Suitable for metric ceilings type, armstrong module
Installation• Mounting holes provided facilitate chain suspension for
recess mounting
Maintenance• Optical system is fixed on the luminaire using SS spring clips
and can be suspend during installation or maintenance
Applications• Office areas
• Retail shops
• Reception areas
• Public service areas
• Recreational areas
• Schools
Compliance• IP20
• Class I
CADENCE III ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GECFLC 3X36 MO MLCR-300 3 x 36W CFL HLBX 240 0.65 EM,3x 36W 240V 50HZ FSU 230-250V 12 0.85 L0799
GECFLC 3X36 MO MLCR-300 HF 3 x 36W CFL HLBX 240 0.46 HF, 1x36W,2x36W 176-265V NA NA 0.95 L0800
CADENCE IV
GETC 4X18 MO MLCR300 4 x 18W FTL T8 240 0.43 EM, 2 x 36W 240V 50HZ FSU 230-250V 8 0.85 L0788
GETC 4X18 MO MLCR300 HF 4 x 18W FTL T8 240 0.32 HF, 4x18W, 176-265V NA NA 0.98 L0788PH
CADENCE III
CADENCE IV
CADENCE III CADENCE IV
cutout dimension 575x575mmcutout dimension 575x575mm
18
VIGOR / VIGOR-DL
Description Indoor commercial, recess mounted mirror optic suitable
for compact fluorescent lamp
Specifications&Features• High efficiency mirror optics with side parabolic and ‘V’
reflector
• Vigor consists of diffusing white cross louver for better optical performance
• VIGOR-DL consists of 3D structured parabolic cross louver conforming to CAT-II specifications as CIBSE (Charted Institute of Building Services) LG3, 1995
• Pre-wired vacuum pressure copper wound ballast, power factor improvement capacitor, lamp holders and main connectors
• Available with high frequency electronic ballast
• Housing made of CRCA MS sheet in white epoxy powder coat
• Mirror assembly is made out of high purity anodized aluminum and cross louver made out of CRCA MS sheet with white powder coat
• Suitable for metric ceilings type, armstrong module
Installation• Mounting holes are provided to facilitate chain suspension
for recess mounting
Maintenance.• Optical system is fixed on the luminaire using SS spring clips
and can be suspended during installation and maintenance
Applications• Office areas
• Retail shops
• Reception areas
• Public service areas
• Recreational areas
Compliance• IP20
• Class I
VIGOR ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current (A)
Ballast StarterCapacitor
(Mfd)PF
Ordering code
GE CFL C 3X36 MO R-300 3 x 36W CFL HLBX 240 0.65 EM,3x 36W 240V 50HZ FSU 230-250V 12 0.85 L0410
GE CFL C 3X36 MO R-300 HF 3 x 36W CFL HLBX 240 0.46 HF, 1x36W,2x36W 176-265V NA NA 0.95 L0511
VIGOR-DL
GE CFL C 3X36 MO DLR-300 3 x 36W CFL HLBX 240 0.65 EM,3x 36W 240V 50HZ FSU 230-250V 12 0.85 L0392
GE CFL C 3X36 MO DLR-300 HF 3 x 36W CFL HLBX 240 0.46 HF, 1x36W,2x36W 176-265V NA NA 0.95 L0421
VIGOR
VIGOR-DL
VIGOR VIGOR-DL
19
PROLIX
Description• Indoor commercial, recess mounted luminaire with soft
direct and indirect light, suitable for compact fluorescent lamp
Specifications&Features• Has a parabolic finished housing, high reflective inner
surface, detachable circular or square perforated parabolic diffuser with thin perplex sheet that ensures excellent diffused, glare free, optical performance
• Pre-wired with vacuum pressure copper wound ballast, power factor improvement capacitor, lamp holders and mains connector
• Available with high frequency electronic ballast
• Housing made of CRCA MS sheet in white epoxy powder coat
• Diffuser is fabricated from CRCA MS sheet in white epoxy powder coat
• Detachable-gear cover made of CRCA MS sheet in white powder coat
• Suitable for metric ceiling type, armstrong module
Installation• Mounting holes are provided to facilitate chain or hook
suspension for recess mounting
Maintenance• The diffuser is fixed on the luminaire by end lock and can be
pulled out during installation and maintenance
Applications• Office areas
• Hospitals
• Clinics
• Schools and colleges
Compliance• IP20
• Class I
PROLIX PROLIX
cutout dimension 575x575mm
PROLIX ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current (A)
Ballast StarterCapacitor
(Mfd)PF
Ordering code
GE CFL 2X36 MO D/IR-300 2 x 36W CFL HLBX 240 0.43 EM, 2x36W 240V 50HZ FSU 230-250V 8 0.85 L0466A
GE CFL 2X36 MO D/IR-300 HF 2 x 36W CFL HLBX 240 0.57 HF, 2x36W, 176-265V NA NA 0.98 L0918PH
20
PROLIX-P5 / PROLIX-DL
Description Indoor commercial recess mounted luminaire with soft
direct / indirect light, suitable for compact fluorescent lamp
Specifications&Features• Has a parabolic finished housing, high reflective inner
surface epoxy powder coated white
• Prolix-DL consists of 3D cross louver mirror optics, with perplex sheet achieves direct and indirect light
• Prolix P5 has paralite P5 louvers, made of metalized polystyrene and thin perplex sheet for direct lighting with low glare
• Pre-wired with vacuum pressure impregnated copper wound ballast, power factor improvement capacitor, push fit type lamp holders and mains connector
• Available with high frequency electronic ballast
• Optical system made of CRCA MS sheet in white epoxy powder coat
• Detachable gear made of CRCA MS sheet in white powder coat
• Suitable for metric ceiling type, armstrong module
Installation• Mounting holes are provided to facilitate chain or hook
suspension for recess mounting
Maintenance• The diffuser is fixed on the luminaire by push-fit lock and
can be pulled out during installation or maintenance
Application• Office areas
• Hospitals
• Clinics
• Schools and colleges
Compliance• IP20
• Class I
PROLIX-DL
GE CFL 2X36 D/IDLR-300 2 x 36W CFL HLBX 240 0.43 EM, 2x36W 240V 50HZ FSU 230-250V 8 0.85 L1203
GE CFL 2X36 D/IDLR-300 HF 2 x 36W CFL HLBX 240 0.31 HF, 2x36W, 176-265V NA NA 0.95 L1214
PROLIX-P5 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE TC 2X36 MO MLCR-300 2 x 36W CFL HLBX 240 0.43 EM, 2x36W 240V 50HZ FSU 230-250V 8 0.85 P0198A
GE TC 2X36 MO MLCR-300 HF 2 x 36W CFL HLBX 240 0.31 HF, 2x36W, 176-265V NA NA 0.95 L0921PH
PROLIX-P5
PROLIX-DL
PROLIX-P5
cutout dimension 575x575mm
PROLIX-DL
cutout dimension 575x575mmcutout dimension 575x575mm
21
POISE
Description Indoor commercial, recess mounted luminaire suitable for
compact fluorescent lamp
Specifications&Features• Has compact housing height of 50mm, aesthetic ortho
cyclic perforation cover, paralite P5 louvers, perplexed sheet and parabolic back mirror that ensures direct lighting with low glare optical performance
• Pre-wired vacuum pressure copper wound ballast, power factor improvement capacitor, lamp holders and mains connector
• Available with high frequency electronic ballast
• Housing made of CRCA MS sheet in white epoxy powder coat
• Mirror assembly is made of metalised polystyrene paralite P5 louver and thin polyester film
• Back mirror is made of pure anodized aluminum
• Suitable for metric ceiling type, armstrong module
Installation• Mounting holes are provided to facilitate chain or hook
suspension for recess mounting
Maintenance• Top cover fixed by four sliding locks on luminaire, which
can be suspended on a rope during installation and maintenance
Applications• Office areas
• Conference rooms
• Retail shops
• Reception areas
• Public service areas
• Recreational areas
Compliance• IP20
• Class I
POISE POISE
cutout dimension 575x575mm
POISE ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GECFLC 2X36 MO PR-300 2 x 36W CFL HLBX 240 0.43 EM 2x, 36W 240V 50HZ FSU 230-250V 8 0.85 L0438A
GECFLC 2X36 MO P R-300 HF 2 x 36W CFL HLBX 240 0.31 HF, 2x36W, 176-265V NA NA 0.95 L0914PH
GECFLC 3X36 MO PR -300 3 x 36W CFL HLBX 240 0.65 EM,3x 36W 240V 50HZ FSU 230-250V 12 0.85 L0437A
GECFLC 3X36 MO P R-300 HF 3 x 36W CFL HLBX 240 0.46 HF, 1x36W,2x36W 176-265V NA NA 0.99 L0916PH
22
SEQUIN
Description Indoor commercial, recess mounted luminaire suitable for
compact fluorescent lamp
Specifications&Features• Has compact housing, aesthetic ortho cyclic perforation
cover, paralite P5 louvers, perplex sheet and parabolic back mirror that ensures direct lighting with low glare optical performance
• Available with high frequency electronic ballast
• Housing made of CRCA MS sheet in white epoxy powder coat
• Mirror assembly is made of metalised polystyrene paralite P5 louver and thin polyester film
• Back mirror is made of pure anodized aluminum
• Suitable for metric ceiling type
Installation• Mounting clips facilitate recess mounting
Maintenance• Top cover fixed by four sliding locks on luminaire, which
can be suspended on a rope during installation and maintenance
Applications• Corridors
• Retail shops
• Reception areas
• Public service areas
• Recreational areas
Compliance• IP20
• Class I
SEQUIN ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL C 2X18 MO P R-300 HF 2 x 18W CFL DBX 240 0.16 HF, 2x18W, 176-265V NA NA 0.95 P0469
SEQUIN SEQUIN
cutout dimension 275x275mm
23
CADENCE ll / CADENCE-T5
Description Indoor commercial recess mounted, dark light mirror optics
(CAT-II) luminaire, suitable for T8 & T5 fluorescent lamp
Specifications&Features• High efficiency mirror optics with parabolic side reflector
and 3D structured MLC louvers
• Glare and beam are controlled by uniform optical performance as per CAT-II specification, CIBSE LG3, 1995
• Pre-wired with, high frequency ballast for T5 lamps & vacuum pressure impregnated copper wound ballast for T8 lamps, power factor improvement capacitor, push fit type lamp holders and mains connectors
• Available with high frequency electronic ballast for T8 lamp
• Housing made of CRCA MS sheet in white epoxy powder coat
• Center perforation plate is made of CRCA MS sheet in white epoxy powder coat
• Mirror assembly is made of high purity anodized aluminum
• Suitable for metric ceilings type, armstrong module
Installation• Mounting holes provided facilitate chain suspension for
recess mounting
Maintenance• Optical system is fixed on the luminaire using SS spring clips
and can be suspend during installation or maintenance
Applications• Office areas
• Retail shops
• Reception areas
• Public service areas
• Recreational areas
• Schools
Compliance• IP20
• Class I
CADENCE II
CADENCE-T5
CADENCE II
CADENCE-T5
1195
1171
cutout dimension1185x285mm
295
75
1195
1171
cutout dimension1185x285mm
1224
295
75
CADENCE II ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GETC 2x36 MO MLC R-300 2 x 36W FTL T8 240 0.43 EM, 2x36W 240V 50HZ FSU 230-250V 8 0.85 L0786
GETC 2x36 MO MLC R-300 HF 2 x 36W FTL T8 240 0.57 HF, 2x36W, 176-265V NA NA 0.98 L0909
CADENCE-T5
GETC 2X28 MO MLCR-300/R HF 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L0795
GETC 2X54 MO MLCR-300/R HF 2 x 54W FTL T5 240 0.48 HF, 2x54W, 176-265V NA NA 0.99 L1136
24
FLINCH C
Description Recess mounted luminaire suitable for 1X28W and 2X28W
T5 Lamps
Specifications&Features• Housing : CRCA Powder coated in white
• Reflector : The optical compartment comprises of bright anodised imported aluminium reflector and seretted anodised aluminium cross louvers which deliver symmetric light distribution.
• Control gear : HF Ballast .
• Termination : 4 way, 10 A, PBT connector.
• Lamp holders : Push fit polycarbonate lamp holders
Installation• Mounting : Recess type -Suitable for Cutout Dimension
1177x148mm.
• Cable entry : Through grommet of Dia 19 mm hole
Maintenance• Maintanance : Mounting access from bottom by removing
reflector and then gear cover
Applications• Offices
• Banks
• Hotels
• Hospitals
Compliance• IP20
• Class I
FLINCH C ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast PF
Ordering code
FFR 128 C T5 FTL 1X28 Watt 240 0.14 HF 0.99 L2216
FFR 228 C T5 FTL 2X28 Watt 240 0.276 HF 0.99 L2214
FLINCH C FLINCH C
String Mounting provision provided with hole dia 10mm
CUTOUT DIMENSION : 1177mm x 148mm
1195
166
73
25
DUET VX
Description Indoor commercial, recess or surface mounted luminaire,
suitable for T8 fluorescent lamp
Specifications&Features• High efficiency mirror optics, faceted side reflector and
diffusing white cross louver for better optical performance
• Pre-wired vacuum pressure copper wound ballast, power factor improvement capacitor, lamp holders and main connectors
• Available with high frequency electronic ballast
• Housing made of CRCA MS sheet in white epoxy powder coat
• Mirror assembly is made out of high purity anodized aluminum and cross louver made out of CRCA MS sheet with white powder coated
Installation• Mounting holes provided to facilitate surface as well as
recessed mounting
Maintenance• Optical system is fixed on the luminaire using SS spring
clips and can be suspended during maintenance
Applications• Office areas
• Retail shops
• Reception areas
• Public service areas
• Recreational areas
Compliance• IP20
• Class I
DUET-VX ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GETC1X36MOVXS/R 1 x 36W FTL T8 240 0.22 EM, 1x36W 240V 50HZ FSU 230-250V 4 0.85 L1148A
GETC1X36MOVXS/R HF 1 x 36W FTL T8 240 0.28 HF, 1x36W, 176-265V NA NA 0.98 L1159A
GETC2X36MOVXS/R 2 x 36W FTL T8 240 0.43 EM, 2 x 36W 240V 50HZ FSU 230-250V 8 0.85 L1170A
GETC2X36MOVXS/R HF 2 x 36W FTL T8 240 0.57 HF, 2x36W, 176-265V NA NA 0.98 L1181A
DUET VX DUET VX
W
HB
L
A
MODEL DIMENSIONS (MM)LW HA B
36W FTL Single36W FTL Twin
1252 185 81 1237 1701252 185 81 1237 170
Cutout dimension : 36W FTL Single/Twin - 1145x175mm
26
ONO & ONO T5
Description Indoor commercial, surface mounted, mirror optics
luminaire suitable for T8 & T5 fluorescent lamp
Specifications&Features• White colored end-covers, made of engineering plastic
enhance the aesthetic appeal
• Highly efficient mirror optics with faceted side reflector and diffusing white serrated cross louver for better optical performance
• Pre-wired with vacuum pressure impregnated copper wound ballast, for T8 lamps and high frequency ballast for T5 lamps, power factor improvement capacitor, push fit type lamp holders and mains connector
• Available with high frequency electronic ballast for T8 lamps
• Mirror assembly is made out of high purity aluminum
• Housing and cross louver made out of serrated CRCA MS sheet in white powder coating
Installation• Mounting holes are provided to facilitate ceiling and conduit
mounting
Maintenance• Optical system, fixed on the luminaire using SS spring clip
and can be suspended during of maintenance
Applications• Office areas
• Retail shops
• Reception areas
• Recreational areas
Compliance• IP20
• Class I
ONO ONO
ONO ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GETC 1X36 MOS 1 x 36W FTL T8 240 0.22 EM, 1x36W 240V 50HZ FSU 230-250V 4 0.85 L0782A
GETC 1X36 MOS HF 1 x 36W FTL T8 240 0.28 HF, 1x36W, 176-265V NA NA 0.98 L0779
GETC 2X36 MOS 2 x 36W FTL T8 240 0.43 EM, 2x36W 240V 50HZ FSU 230-250V 8 0.85 L1016A
GETC 2X36 MOS HF 2 x 36W FTL T8 240 0.573 HF, 2x36W, 176-265V NA NA 0.98 L1027A
ONO-T5
GETC 1X28 MOS HF 1 x 28W FTL T5 240 0.14 HF, 1x28W, 176-265V NA NA 0.99 L1119
GETC 2X28 MOS HF 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L1120
GETC 1X54 MOS HF 1 x 54W FTL T5 240 0.26 HF, 1x54W, 176-265V NA NA 0.99 L1121
GETC 2X54 MOS HF 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L1122
27
PRISTINE SURFACE & PENDANT
Description Surface and suspended range(up/down) of luminaire
suitable for T5 lamps
Specifications&Features• Housing made of CRCA Sheet in white epoxy powder
coated
• Mini yet efficient anodised aluminium reflector
• Available in recessed, suspended and surface version
• High frequency electronic
• Termination by 3 way , 10A,PBT connector
• Push fit polycarbonate lamp holders
• Suitable for modular / armstrong ceiling for recessed type
• Restrict the ingress of dust with optional flat acrylic top cover
Installation• Surface mounting with 4 screws
i. Suspension mounting with 2 clutch cable
ii. Provision for cascading using cascading bracket for pendant version
Maintenance• Lamps and ballast can be replaced by gently pulling out
mirror
Applications• Offices
• Banks
• Hotels
• Hospitals
Compliance• IP20
• Class I
PRISTINE PENDANT ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Weight (kg) PF Ordering code
PFP 228 Mi O T5 FTL 2X28W 240 0.26 HF <10% APFC 3.0 >0.98 L2530
Pristine clear flat acrylic - - - - 0.5 - L2531
PRISTINE SURFACE ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Weight (kg) PF Ordering code
PFS 228 Mi O T5 FTL 2X28W 240 0.26 HF <10% APFC 3.0 >0.98 L2532
PFS 214 Mi O T5 FTL 2X14W 240 0.15 HF <10% APFC 1.7 >0.98 L2533
PRISTINE SURFACE & PENDANT PRISTINE SURFACE & PENDANT
599
Pristine Surface 2X14
203
52
400
1200
203
52
900
Pristine Surface 2X28
28
AARON
Description Indoor commercial up/down suspended mounted luminaire
suitable for T5 fluorescent lamps
Specifications&Features• Sleek design extruded aluminum housing with white
powder coat
• Complies to the CIBSE (Charted Institute of Building Services) amendment 2001 for LG3 requirements
• Reflector made of specular pre-anodized aluminum
• Reflector option: P5 Paralite louver and MLC mirror optics
• Restrict the ingress of dust with optional flat acrylic top cover
• Termination by 3 way, 10A PBT connector
• Push fit poly-carbonate lamp holder
• Compatible with lighting control accessories
• Cascading option is provided on the end plate
Installation• Suspension with multi strand metal ropes
• Cable entry through 12mm dia grommet
• Cascading by 2 holes of 6.5mm dia on end plate
Maintenance• Clutch lock for luminaire height adjustment
• Ballast replacement from top
Applications• Offices
• Conference rooms
• Banks and Insurance
• School and lecturer rooms
• Retail
• Hospital and clinics
• Hotels and restaurants
Compliance• IP20
• Class I
AARON AARON
1200
300
57
AARON ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
AN328 MO 3 x 28W FTL T5 240 0.42 HF, 1 x28W, 2x28W, 176-265V NA NA 0.99 L2188
AN354 MO 3 x 54W FTL T5 240 0.75 HF, 1x54W, 2x54W, 176-265V NA NA 0.99 L2189
AN28254 MO 1 x 28W FTL T5+2 x 54W FTL T5 240 0.65 HF, 1x28W/2x54W, 176-265V NA NA 0.99 L2190
AN54228 MO 2 x 28W FTL T5+1 x 54W FTL T5 240 0.54 HF, 2x28W/1x54W, 176-265V NA NA 0.99 L2191
AN328 P5 3 x 28W FTL T5 240 0.42 HF, 1 x28W, 2x28W, 176-265V NA NA 0.99 L2193
AN354 P5 3 x 54W FTL T5 240 0.75 HF, 1x54W, 2x54W, 176-265V NA NA 0.99 L2194
AN28254 P5 1 x 28W FTL T5+2 x 54W FTL T5 240 0.65 HF, 1x28W/2x54W, 176-265V NA NA 0.99 L2195
AN54228 P5 2 x 28W FTL T5+1 x 54W FTL T5 240 0.54 HF, 2x28W/1x54W, 176-265V NA NA 0.99 L2196
AN228 P5 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2197
AN254 P5 2 x 54W FTL T5 240 0.48 HF, 2x54W, 176-265V NA NA 0.99 L2198
AN Flat Acrylic NA NA NA NA NA NA NA L2192
29
EILEEN
Description Indoor commercial up/down suspended mounted luminaire
suitable for T5 fluorescent lamps
Specifications&Features• Housing made of CRCA powder coated in white with optic
perforation and elegant curve at the bottom
• Complies to the CIBSE (Charted Institute of Building Services) amendment 2001 for LG3 requirements
• Polyester film diffuser ensures soft diffused light
• Restrict the ingress of dust with optional flat or curved thermoformed acrylic top cover
• Rectangular(RP), square, (SP) circular(CP) – light emitting perforation options
• Termination by 3 way, 10A PBT connector
• Push fit poly-carbonate lamp holder
• Cascading option is provided on the end plate
Installation• Suspension with multi strand metal ropes
• Cable entry through 12mm dia. grommet
Maintenance• Clutch lock for luminaire height adjustment
• Lamp and ballast replacement from top
Applications• Offices
• Conference rooms
• Banks and Insurance
• School and lecturer rooms
• Retail
• Hospital and clinics
• Hotels and restaurants
Compliance• IP20
• Class I
EILEEN ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
ENC228 RP 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2175
ENC228 CP 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2176
ENC228 SP 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2177
ENC254 RP 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L2178
ENC254 CP 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L2179
ENC254 SP 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L2180
EN Flat Acrylic NA 240 NA NA NA NA NA L2181
EN Curve Acrylic NA NA NA NA NA NA NA L2182
EILEEN EILEEN
1200.0mm
300.
0mm
300
57
30
LMS BATTEN
Description LMS T5 decorative batterns are a sleek luminaire with
non corrosive body made of polycarbonate. The luminaire is available in 14W and 28W T5 lamp option. They are available in two version viz. with diffuser and without diffuser.
Specifications&Features• Aesthetically appealing
• Polycarbonate housing & Polycarbonate end caps
• Option of clear PC diffuser, UV-proof
• Inter-connect feature on end caps (Max 8 pcs)
• Built in electronic ballast
• Wall mount or ceiling mount
• Ambient temperature: -10 deg C to +40 degC
• 220V-240V, 50-60Hz input rating
Installation
• Compatible for wall mount or ceiling mount
• Fixture can be mounted using installer provided with the luminaire
• A maximum of 8 numbers can be wired together
Maintainance
• For diffuser version lamp can be replaced by removing the front diffuser.
Applications• Households
• Kitchen
• Washrooms
• Workshop
• Office
• Showroom
• Supermarket
• Store
Compliance• IP20
• Class II
LMS BATTEN ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
Voltage (V)Mains
Current (A)Ballast PF Ordering Code
Ordeing code with connector
LMS 14 D N 1x14W T5 220V-240V 0.12A HF 0.6 AF61374 COLMS14DNP
LMS 14 N N 1x14W T5 220V-240V 0.12A HF 0.6 AF61375 COLMS14NNP
LMS 28 D N 1x28W T5 220V-240V 0.14A HF 0.95 AF61378 COLMS28DNP
LMS 28 N N 1x28W T5 220V-240V 0.14A HF 0.95 AF61379 COLMS28NNP
LMS BATTEN LMS BATTEN
31
BROW LH
Description Recess mounted, low depth downlighting luminaire, suitable
for horizontally mounted compact fluorescent lamp
Specifications&Features• Has wide optic reflector
• Fabricated from aluminum sheet in white eindhoven powder coat
• Black powder coated side bracket has lamp holder, ballast and mains connector
• Pre-wired up to mains connector
• Mirror assembly is made of high purity anodized aluminum
• Top surface has circular dot pattern for better light output
Installation• Retaining clips facilitate mounting on false ceiling
Maintenance• Re-lamping, can be done by removing the lamp by
horizontal movement of lamp through hole provided in the reflector
Applications• Offices
• Corridors
• Walkways
• Shops
• Hotels
• Clubs
• Public areas
Compliance• IP20
• Class I
BROW LH ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL 1X18 BDN LH R (H) 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L0856LH
GE CFL 1X18 BDN LH R (H) HF 1 x 18W CFL DBX 240 0.08 HF, 1x18W, 176-265V NA NA 0.95 L8056LHPH
GE CFL 2X18 BDN LH R (H) 2 x 18W CFL DBX 240 0.36 EM, 2x18W 240V 50HZ NA NA 0.50 L0857LH
GE CFL 2X18 BDN LH R (H) HF 2 x 18W CFL DBX 240 0.16 HF, 2x18W, 176-265V NA NA 0.95 L0857LHPH
GE CFL 1X18 BDL LH R (H) MATT 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 P0290LH
GE CFL 1X18 BDL LH R (H) MATT HF 1 x 18W CFL DBX 240 0.08 HF, 1x18W, 176-265V NA NA 0.95 P0290LHPH
GE CFL 2X18 BDL LH R (H) MATT 2 x 18W CFL DBX 240 0.36 EM, 2x18W 240V 50HZ NA NA 0.50 P0291LH
GE CFL 2X18 BDL LH R (H) MATT HF 2 x 18W CFL DBX 240 0.16 HF, 2x18W, 176-265V NA NA 0.95 P0291LHPH
BROW LH BROW LH
CUTOUT DIMENSION
90
O175
196.0O
32
LDDL
Description LD DL is a recess mounted low depth downlighter luminaire
suitable for CFL lamps. LD DL is designed for low clearance ceiling applications with outstanding aesthetics.
Specifications&Features• Housing: Powder coated CRCA ring, gear tray and brackets
• Optical System: Mirror assembly comprise scientifically designed high purity anodized aluminum reflector
• Termination: Terminal block with 3 way connector
• Lamp holders: Screw type 2 Pin CFL round holder
• Mounting clips: S.S Clips
Installation
• Mounting: Recess mounted. Retaining Clips facilitate mounting in false ceiling
Maintainance
• Maintenance: Can be removed by horizontal movement of lamp through dia. 45mm hole provided on reflector
Applications• Offices
• Corridors
• Clubs
• Shops
• Hotels
• Public Areas
Compliance• IP20
• Class I
LDDL ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast PF
Ordering code
LDDN 118 CFL 1X18W CFL DBX 240 0.18A EM, 1X18W 240V 50HZ 0.5 L2528
LDDN 118 CFL HF 1X18W CFL DBX 240 0.08A HF, 1X18W 150-280V 0.95 L2555
LDDN 218 CFL 2X18W CFL DBX 240 0.36A EM, 2X18W 240V 50HZ 0.50 L2529
LDDN 218 CFL HF 2X18W CFL DBX 240 0.16A HF, 2X18W 150-280V 0.95 L2556
LDDL LDDL
CUTOUT DIMENSION172
69
O175
196O
LDDL 1X18
CUTOUT DIMENSION
LDDL 2X18
69.0
196O
172
145
O175
33
ACME
Description Indoor decorative, recess mounted, downlighting luminaire
suitable for vertically mounted compact fluorescent lamp
Specifications&Features• Has wide optic reflector
• Rim is fabricated from aluminum sheet in white eindhoven powder coat
• White powder coated side brackets have lamp holder, ballast and mains connector
• Pre-wired up to mains connector
• Has electro-chemically brightened aluminum reflector
• Combination of gloss at the bottom, intermediate diamond and serration at the top for higher light output
• Reflector is held by stainless steel clips
Installation• Retaining clips facilitate mounting on false ceiling
Maintenance• Re-lamping can be done from bottom
Applications • General office areas
• Corridors
• Walkways
• Shops
• Hotels
• Public area
• Restaurants
Compliance• IP20
• Class I
ACME ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL C 1X10 DN R(V) 1 x 10W CFL DBX 240 0.17 EM, 10W 240V 50HZ NA NA 0.50 L0614
GE CFL C 1X13 DN R(V) 1 x 13W CFL DBX 240 0.17 EM, 13W 240V 50HZ NA NA 0.50 L0390
ACME ACME
34
STREW LH
Description Recess mounted, glare controlled downlighting luminaire
suitable for horizontally mounted compact fluorescent lamp
Specifications&Features• Has wide optic reflector
• Rim is fabricated from aluminum sheet in white eindhoven powder coat
• Black powder coated side bracket has lamp holder, ballast and main connector
• Pre-wired up to mains connector
• Mirror assembly is made of high purity anodized aluminum
• Frosted glass cover for better glare control
Installation• Retaining clips facilitate mounting on false ceiling
• Reflector held by three stainless steel clips
Maintenance• Easy removal of mirror assembly
• Slots provided on both sides of reflector for maintenance
Applications• Offices
• Corridors
• Walkways
• Shops
• Hotels
• Clubs
• Public areas
Compliance• IP20
• Class I
STREW LH ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL C 1X10/13 DN FG LH R (H) 1 x 10/13W CFL DBX 240 0.17 EM, 1x10/13W 240V 50HZ NA NA 0.50 P0362LH
GE CFL C 1X10/13 DN FG LH R (H) HF 1 x 10/13W CFL DBX 240 0.05 HF, 1x10/13W, 176-265V NA NA 0.95 P0362LHPH
GE CFL C 2X10/13 DN FG LH R (H) 2 x 10/13W CFL DBX 240 0.38 EM, 2x10/13W 240V 50HZ NA NA 0.50 P0449LH
GE CFL C 2X10/13 DN FG LH R (H) HF 2 x 10/13W CFL DBX 240 0.12 HF, 2x10/13W, 176-265V NA NA 0.95 P0449LHPH
GE CFL C 1X18 DN FG LH R (H) 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 P0361LH
GE CFL C 1X18 DN FG LH R (H) HF 1 x 18W CFL DBX 240 0.08 HF, 1x18W, 176-265V NA NA 0.95 P0361LHPH
GE CFL C 2X18 DN FG LH R (H) 2 x 18W CFL DBX 240 0.36 EM, 2x18W 240V 50HZ NA NA 0.50 P0009LH
GE CFL C 2X18 DN FG LH R (H) HF 2 x 18W CFL DBX 240 0.16 HF, 2x18W, 176-265V NA NA 0.95 P0009LHPH
STREW LH STREW LH
CUTOUT DIMENSION
O175
120
145
196.0
35
TURBO-XL
Description Recess mounted, glare controlled downlighting luminaire,
suitable for horizontally mounted compact fluorescent lamp
Specifications&Features• Has a wide optic reflector
• Rim fabricated from aluminum sheet in white eindhoven powder coat
• Black powder coated side bracket and grey tray has lamp holder, ballast and mains connector
• Pre-wired up to mains connector
• Mirror assembly is made of high purity anodized aluminum
• Reflector with anodized aluminum with radial double paralogic louver for better glare control as per CAT-II specifications as per CIBSE (Charted Institute of Building Services) LG3
Installation• Retaining clips facilitate mounting on false ceiling
• Reflector held by stainless steel clips
Maintenance• Easy removal of mirror assembly
• Slots provided on both sides of the reflector for maintenance
Applications • Offices
• Corridors
• Walkways
• Shops
• Hotels
• Clubs
• Public areas
Compliance• IP20
• Class I
TURBO-XL ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GECFLC2X26DN R(H) 2 x 26W CFL DBX 240 0.64 EM, 2x26W 240V 50HZ NA NA 0.50 L0433
GECFLC2X26DNR (H) HF 2 x 26W CFL DBX 240 0.22 HF, 2x26W, 176-265V NA NA 0.95 L0433PH
TURBO-XL TURBO-XL
36
CMH/LED DL-ADJ
Description Recess mounted, non integral downlighting luminaire,
suitable for ceramic metal halide lamp
Specifications&Features• Housing made of powder coated die - cast aluminum
housing with CRCA brackets
• High purity aluminum spun reflector with chemically bright anodized for better light output
• Heat and toughened glass cover
• Mounting clips made of SS
• Suitable for lamp with G12 base
• Luminaire available in fixed – CMH FX & adjustable CMH ADJ
• CMH-ADJ with two way adjustable lamp position
• Powder coated die - cast aluminum rings with chrome rods for CMH-ADJ
Installation• Retaining clips facilitate mounting on false ceiling
Maintenance• Lamp can be access by rotating reflector assembly toward
specified direction on ring
Applications • Departmental stores
• Hotels
• Museum display
• Shopping malls
• Airport terminals
Compliance• IP20
• Class I
CMH/LED DL-ADJ ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal Voltage
(V)
Mains Current (A)
Ballast StarterCapacitor
(mfd)PF
ordering code
combined code
ADN 35/70W CMH 35/70W CMH G12 240 0.19/0.36 NA NA NA 0.95 L2492CDADN35
GBSE 35W CMH 35W CMH Gear Box 240 0.19 CMH electronic 35W NA NA 0.95 L2493
ADN 35/70W CMH 35/70W CMH G12 240 0.19/0.36 NA NA NA 0.95 L2492CDADN70
GBSE 70W CMH 70W CMH Gear Box 240 0.36 CMH electronic 70W NA NA 0.95 L2494
FDN 35/70W CMH 35/70W CMH G12 240 0.19/0.36 NA NA NA 0.95 L2491CDFDN35
GBSE 35W CMH 35W CMH Gear Box 240 0.19 CMH electronic 35W NA NA 0.95 L2493
FDN 35/70W CMH 35/70W CMH G12 240 0.19/0.36 NA NA NA 0.95 L2491CDFDN70
GBSE 70W CMH 70W CMH Gear Box 240 0.36 CMH electronic 70W NA NA 0.95 L2494
ADNFDN ADN
CMH/LED DL-ADJ
FDN
CMH/LED DL-ADJ
37
MORSEL
Description Recess mounted, rolling type, downlighting luminaire,
suitable for halogen lamp
Specifications&Features• Rim fabricated from die-cast aluminum in white eindhoven
powder coat
• Pre-wired up to mains connector
• Swiveling unit has an aluminum die-cast eye ball that changes position of lamp
• Lamp position is retained by circular wire spring
Installation• Retaining clips facilitate mounting on false ceiling
Maintenance• Easy removal of circular wire for re-lamping from bottom
Applications • Office area
• Conference rooms
• High-end fashion shops
• Boutiques
• Small restaurants
Compliance• IP20
• Class I
MORSEL ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Starter
Capacitor (Mfd)
PFOrdering
codeCombined
code
GE MR C 1X50 DN RIR 1 x 50W HAL MR16 240 0.22 12V ELECTRONIC TRANS NA NA 0.99 L0415+L0761 CDMRHAL50
MORSEL MORSEL
38
LENTO
Description Surface mounted, glare controlled downlighting luminaire,
suitable for horizontally mounted compact fluorescent lamp
Specifications&Features• Has a wide optic reflector
• Housing made of aluminum sheet in white eindhoven powder coat and comprises of lamp holder, ballast and mains connector
• Pre-wired up to mains connector
• Mirror assembly has high purity anodized aluminum reflector, circular dot pattern on top, gloss finish at middle and serration at bottom
• Scratch-proof glass covers, for better optical control
Installation• Three mounting slots of 4mm dia. each on the rear side to
facilitate ceiling mounting
Maintenance• Both the sides of the reflector have 50mm dia. slots for
re-lamping
Applications• Offices
• Corridors
• Walkways
• Shops
• Hotels
• Clubs
• Public areas
Compliance• IP20
• Class I
LENTO ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL C 2X13 DN FG S 2 x 13W CFL DBX 240 0.38 EM,2x 13W 240V 50HZ NA NA 0.50 L0807CY
GECFLC 2X18 DN FG S 2 x 18W CFL DBX 240 0.36 EM, 2x18W 240V 50HZ NA NA 0.50 L0808CY
LENTO LENTO
39
MINT
Description Surface mounted, downlighting luminaire, suitable for
horizontally mounted compact fluorescent lamp
Specifications&Features• Has a wide optic reflector
• Housing made of aluminum sheet in white eindhoven powder coat and comprises of lamp holder, ballast and mains connector
• Pre-wired up to mains connector
• UV stabilized milky white acrylic diffuser for a glare free atmosphere and aesthetic appeal
Installation• Three mounting slots of 3mm dia each on the rear side to
facilitate ceiling mounting
Maintenance• Easy removal of acrylic cover for re-lamping
Applications • Home
• Shops
• Walkways
• Office area
• Hyper-markets
• Corridors
• Stairways
Compliance• IP20
• Class I
MINT ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL 2X10 DN AO S 2 x 10W CFL DBX 240 0.35 EM, 2x10W 240V 50HZ NA NA 0.50 L0692
GE CFL 2X18 DN AO S 2 x 18W CFL DBX 240 0.36 EM, 2x18W 240V 50HZ NA NA 0.50 L0606
GE CFL 2X18 DN AO S HF 2 x 18W CFL DBX 240 0.35 EM, 2x10W 240V 50HZ NA NA >0.90 L0606PH
MINT MINT
40
ARIA
Description Pendant mounted, downlighting luminaire, suitable for
vertically mounted compact fluorescent lamp
Specifications&Features• Has a wide optic reflector
• Housing made of aluminum sheet in white eindhoven powder coat and comprises of lamp holder, ballast and mains connector
• Pre-wired up to mains connector
• Poly-carbonate serrated aesthetic refractor for better optical performance
Installation• Aluminum sheet with black, powder coated mounting unit
for ceiling mounting
Maintenance• Re-lamping can be done from bottom
Applications• Reception area
• Corridors
• Recreational area
• Shops
• Cafeterias
• Boutiques
Compliance• IP20
• Class I
ARIA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
GE CFL C 1X18 DN PR 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L1302
GE CFL C 1X26 DN PR 1 x 26W CFL DBX 240 0.33 EM, 1x26W 240V 50HZ NA NA 0.42 L0839
GE CFL C 2X26 DN PR 2 x 26W CFL DBX 240 0.64 EM, 2x26W 240V 50HZ NA NA 0.42 L1304
GE CFL C 1X42 DN PR HF 1 x 42W CFL TBX 240 0.21 HF, 1x42W, 176-265V NA NA 0.95 L1303
ARIA ARIA
lightingretail
lightingretail
FLINCH AS 45
FLINCH ASYMMETRIC 46
FLINCH RECESS 47
FLINCH SURFACE 48
VINCE 49
LINA 50
LINA MAXI 51
45
FLINCH AS
Description Indoor retail recess mounted luminaire suitable for
fluroscent T5 lamp
Specifications&Features• Housing made of CRCA MS sheet in white epoxy powder
coat
• Pre-wired with electronic ballast, imported lamp holder and 3 way 10A mains connector for 2.5 sq. mm cable
• The optical compartment has a bright anodized imported aluminum reflector for asymmetric light distribution
• Suitable for armstrong ceiling mounting
Installation• Suspension mounting is done with 4 mounting brackets
Maintenance• Remove two screws for ballast replacement
Applications• Office areas
• Retail applications
Compliance• IP20
• Class I
FLINCH AS FLINCH AS
166
49
166
1195
49
FLINCH AS ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (mfd)
PFOrdering
code
FFR154 A 1X54W FTL T5 240 0.26 HF, 1X54W, 176-265V NA NA 0.99 L2126
46
FLINCH ASYMMETRIC
Description Recess mounted luminaire suitable for fluorescent T5 lamps
Specifications&Features• Aesthetically designed aluminum extruded trunk and
in-built cable holding provision
• Available in standard length of 3.6m / 2.4m /1.2m
• Loop in / loop out option provided
• Optical compartment has bright anodized imported aluminum reflector and serrated anodized aluminum cross louvers for asymmetric light distribution
• Pre-wired with electronic ballast, imported lamp holder and 4 way 10A mains connector with 2.5 mm sq. mm cable with loop in / loop out
• Suspension system comprises of adjustable safety lock for variable mounting position, suspension cable and ceiling mounting adaptor
• Coupler made of CRCA powder coated for cascading several trunking sections
Installation• SS clamps facilitate luminaire snapping on the trunk at any
desired locations
Maintenance• Safety ‘drop-down’ system ensures easy maintenance
Applications• Commercial offices
• Retail stores
Compliance• IP20
• Class I
FLINCH ASYMMETRIC ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
FFR228A 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2125
Trunking 3.6mtr NA NA NA NA NA NA NA L2121M
Trunking 2.4mtr NA NA NA NA NA NA NA L2122M
Trunking 1.2mtr NA NA NA NA NA NA NA L2123M
FLINCH ASYMMETRIC FLINCH ASYMMETRIC
1195
166
49
143
166
9287
4943
47
FLINCH RECESS
Description Recess mounted luminaire suitable for fluorescent T5 lamps
Specifications&Features• Aesthetically designed aluminum extruded trunk and
in-built cable holding provision
• Available in standard length of 3.6m / 2.4m /1.2m
• Loop in / loop out option provided
• Optical compartment has bright anodized imported aluminum reflector and serrated anodized aluminum cross louvers for symmetric light distribution
• Pre-wired with electronic ballast, imported lamp holder and 4 way 10A mains connector with 2.5 mm sq. mm cable with loop in / loop out
• Suspension system comprises of adjustable safety lock for variable mounting position, suspension cable and ceiling mounting adaptor
• Coupler made of CRCA powder coated for cascading several trunking sections
Installation• SS clamps facilitate easy movement of the luminaire
Maintenance• Safety ‘drop-down’ system ensures easy maintenance
Applications• Commercial offices
• Retail stores
Compliance• IP20
• Class I
FLINCH RECESS FLINCH RECESS
1195
166
49
143
166
9287
4943
FLINCH RECESS ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
FFR228 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2112
Trunking 3.6mtr NA NA NA NA NA NA NA L2121M
Trunking 2.4mtr NA NA NA NA NA NA NA L2122M
Trunking 1.2mtr NA NA NA NA NA NA NA L2123M
48
FLINCH SURFACE
Description Surface mounting luminaire suitable for fluorescent T5
lamps
Specifications&Features• Aesthetically designed aluminum extruded trunk and
in-built cable holding
• Available in standard length of 3.6m / 2.4m /1.2m
• Fabricated from CRCA steel –powder coat
• Pre-wired with electronic ballast, imported lamp holder and 4 way 10A mains connector with loop in / loop out option provided
• The optical compartment has bright anodized imported aluminum reflector and serrated anodized aluminum cross louvers for symmetric light distribution
Installation • Suspension system comprises of adjustable safety lock for
variable mounting positions, suspension cable and ceiling mounting adaptor
• Coupler made of CRCA powder coated for cascading several trunking sections
• Adjustable safety locks for various mounting positions
Maintenance• Safety ‘drop-down’ system ensures easy maintenance
Applications• Commercial offices
• Retail stores
Compliance• IP20
• Class I
FLINCH SURFACE ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
FFS228 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2111
Trunking 3.6mtr NA NA NA NA NA NA NA L2121M
Trunking 2.4mtr NA NA NA NA NA NA NA L2122M
Trunking 1.2mtr NA NA NA NA NA NA NA L2123M
1195
155
49
155
92
4943
FLINCH SURFACE FLINCH SURFACE
49
VINCE
Description Surface, pendant or cable mounting luminaire suitable for
fluorescent T5 lamps
Specifications&Features• Aesthetically designed aluminum extruded trunk and
in-built cable holding with white or black powder coat
• Available in standard length of 3m / 1.2m
• Stylish end cap assembly made of impact resistant engineering plastic
• The powder coated, CRCA MS gear tray
• HF ballast and the 4 way 10A mains connector mounted on the gear tray
• Reflector fabricated from pre-anodized imported, high purity aluminum sheet
• Suspension system comprises of adjustable safety lock for variable mounting positions, suspension cable and ceiling mounting adaptor
• Coupler made of CRCA powder coated for cascading several trunking sections
Installation• Adjustable safety locks for various mounting positions
Maintenance• Safety ‘drop-down’ system ensures easy maintenance
Applications• Commercial offices
• Retail stores
Compliance• IP20
• Class I
VINCE VINCESTANDARD TRUNKING HEAVY DUTY TRUNKING
e
e
1195
130
69
130
6343
e130
6365
VINCE ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
VTF 228 W 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2131
VTF 228 B 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2132
Trunking 3mtr NA NA NA NA NA NA NA L2124
Trunking 1.2mtr NA NA NA NA NA NA NA L2123
Trunking 3mtr NA NA NA NA NA NA NA L2130
Trunking 1.2mtr NA NA NA NA NA NA NA L2128
50
LINA
Description Surface, pendant, cable mounted luminaire suitable for
fluorescent T5 lamps
Specifications&Features• Aesthetically designed aluminum extruded trunk and
in-built cable holding provision
• Available in standard length of 1.18m, 2.37m
• Fabricated from CRCA steel –powder coat reflector
• Pre-wired with electronic ballast, imported lamp holder and 4 way 10A mains connector with 2.5 mm sq. mm cable with loop in / loop out option provided
• Luminaire can be fixed on tract any desired location with the help of cap nuts
• Suspension system comprises of adjustable safety lock for variable mounting positions, suspension cable and ceiling mounting adaptor
• Coupler made of CRCA powder coated for cascading several trunking sections
Installation• Adjustable safety locks for various mounting positions
Maintenance• Can be hung down by safety ropes, ensures easy
maintenance
Applications• Commercial office
• Retail stores
Compliance• IP20
• Class I
LINA LINA
LFS 154
LFS 254
1180 82
82
2370 82
82
LINA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
LFS154 1 x 54W FTL T5 240 0.24 HF, 1x54W, 176-265V NA NA 0.99 L2166
LFS254 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L2165
51
LINA MAXI
Description Surface, pendant, cable mounted luminaire suitable for
fluorescent T5 lamps
Specifications&Features• Housing made of CRCA white powder coated, which acts as
a reflector
• White powder coated aluminium extrusion trunking with arrangement for cable position and maintenance
• CRCA white powder coated gap filler to fill the gap between two fixtures
• Pre-wired with electric ballast, 3 way, 10A, PC connector and lamp holder
• Reflector option available fixed in housing
Installation• Suspension with multi strand metal cables
• Clutch lock for height adjustment of fixtures
Maintenance• Lamp / Ballast replacement from bottom and cable entry is
from end
Applications• Wide range of retail trunk lighting applications
• Ease of flexible layout in shopping complex
Compliance• IP20
• Class I
LINA MAXI ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
LM228 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2202
LM254 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L2203
LM428 4 x 28W FTL T5 240 0.56 HF, 2x28W, 176-265VX2 NA NA 0.99 L2200
LM454 4 x 54W FTL T5 240 0.96 HF, 2x54W, 176-265VX2 NA NA 0.99 L2201
LM228 AR 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.99 L2206
LM254 AR 2 x 54W FTL T5 240 0.46 HF, 2x54W, 176-265V NA NA 0.99 L2207
LM428 AR 4 x 28W FTL T5 240 0.56 HF, 2x28W, 176-265VX2 NA NA 0.99 L2204
LM454 AR 4 x 54W FTL T5 240 0.96 HF, 2x54W, 176-265VX2 NA NA 0.99 L2205
LINA MAXI LINA MAXI
lightingindustrial
lightingindustrial
INDUS 55
ASTER 56
MARINER T5 57
CLEAN ROOM 58
ALCOV - MO 59
ALCOV - ME 60
ALCOV - HO 61
ALCOV - HE 62
ALCOV NI HE 63
ALCOV NI HO 64
ALCOV PRISMATIC 65
ECHELON - OPEN & ECHELON - CLOSED 66
EIFFEL - OPEN & EIFFEL - CLOSED 67
VELLO 68
BULK HEAD 69
55
INDUS
Description Industrial batten ceiling or suspension mounted luminaire
suitable for T5 fluorescent lamps
Specifications&Features• Has a channel cover and optional reflector
• Cover functions as a reflector
• Pre-wired with HF ballast, push fit type lamp holders and mains connector
• Channel cover is made of CRCA MS sheet and finishing is done with stove enamel white
• End caps are made of engineering plastic
• Optional anodised glossy reflector for good light distribution
Installation• Suitable for 22mm conduit suspension and direct mounting
Maintenance• Knockout for cable entry
Applications• Shops
• Office areas
• Warehouses
• Stores
• Factories
Compliance• IP20
• Class I
INDUS ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
Combined code (Ordering code with
reflector)
GET CI 1X28 C/S HF 1X28WFTL T5 240 0.14A HF<30%PPFC NA NA 0.99 L1346 ILIBT128RS
GET CI 2X28 C/S HF 2X28WFTL T5 NA 0.27A HF<30%PPFC NA NA 0.99 L1347 ILIBT228RS
GET CI 1x54 C/S HF 1x54WFTL T5 NA 0.24 HF, 1X54W,176-26 NA NA 0.99 L1356+L1492 ILIBT154R
GET CI 2X54 C/SHF 2X54WFTL 75 NA 0.46 HF, 2X54W,176-26 NA NA 0.99 L1355+L1492 ILIBT254R
INDUS 128 ALR NA NA NA NA NA NA NA L1481 -
INDUS 228 ALR NA NA NA NA NA NA NA L1482 -
INDUS INDUS
g
600.0
880.01180.0
66.0
70.0
1125.0
33.0
1104.0
92.0
65
56
ASTER
Description Industrial batten ceiling or suspension mounting luminaire,
suitable for T8 fluorescent lamps
Specifications&Features• Has a channel, cover and optional reflector
• Elegant and unique holder caps
• Pre-wired vacuum pressure, copper wound ballast, power factor improvement capacitor, lamp holders and mains connector
• All accessories are held within the channel
• Available with high frequency electronic ballast
• Channel cover is made of CRCA MS sheet and finishing is done with stove enamel white
• End caps are made of engineering plastic
• Option of powder coated reflector for improving light distribution
Installation
• Conduit suspension and direct mounting
Maintenance• Knockout for cable entry
Applications• Shops
• Office areas
• Warehouses
• Stores
• Factories
Compliance• IP20
• Class I
ASTER ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
Combined code (Ordering code withreflector)
GETCI1X36C/S 1 x 36W FTL T8 240 0.22 EM, 1x36W 240V 50HZ FSU 230-250V 4 0.85 L0397 ILABTI36R
GETCI1X36C/S HF 1 x 36W FTL T8 240 0.28 HF, 1x36W, 176-265V NA NA 0.98 L0424 ILABTI36RE
GETCI2X36C/S 2 x 36W FTL T8 240 0.43 EM,2X36W 240V 50HZ FSU 230-250V 8 0.85 L0398 ILABT236R
GETCI2X36C/S HF 2 x 36W FTL T8 240 0.57 HF, 2x36W, 176-265V NA NA 0.98 L0423 ILABT236RE
PCR - - - - - - - L0399 -
ASTER ASTER
57
MARINER T5
Description Indoor industrial corrosion-proof luminaire for ceiling or
suspension mounting suitable for T5 fluorescent lamps
Specifications&Features• Poly-carbonate housing, diffuser & reflector for lamp
• Superior photometric performance, high efficiency, long life, safety & reliability
• Pre-wired with HF ballast, push fit type lamp holders and mains connector
• Grey colour housing made of poly-carbonate with greater impact resistance
• Diffuser is made of self extinguishing material
• UV stabilized, prevents yellowing
• Flat profile steel sheet made reflector with white stove enameled powder coat ensures high reflective index
• Clips are made of stainless steel with steel coupling for anti-vandal enclosure
Installation• Ceiling and pendant mounting with hooks
Maintenance• Knock out for cable entry
• Easy removal of cover
Applications• Semiconductor industry
• Tunnels
• Parking lots
• Walking lanes and other wet or dusty locations
Compliance• IP65
• Class I
MARINER- T5 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
MAR114FTL HF 1 x 14W FTL T5 240 0.08 HF, 1x14W, 176-265V NA NA 0.99 L1612I
MAR128FTL HF 1 x 28W FTL T5 240 0.14 HF, 1x28W, 176-265V NA NA 0.95 L1613I
MAR214FTL HF 2 x 14W FTL T5 240 0.14 HF, 2x14W, 176-265V NA NA 0.99 L1614I
MAR228FTL HF 2 x 28W FTL T5 240 0.28 HF, 2x28W, 176-265V NA NA 0.95 L1615I
MARINER - T5 MARINER - T5
58
CLEAN ROOM
Description Clean room recess mounted bottom access luminaire
suitable for CFL and T5 lamps. Available in two range viz. Basic and premium
Specifications&Features• Housing : CRCA Powder coated in white
• Reflector options :
1) PREMIUM VERSION with Pre-Anodised Aluminium Reflector
2) BASIC VERSION without Reflector
• Clear PMMA bottom cover
• Control gear: HF Ballast
• Termination: 4 way 10 A, PBT connector
• Lamp holders: Push fit polycarbonate lamp holders
Installation• Mounting : Recess mounting suitable for 575mm x575mm
cut out dimension
• Cable entry : Through PG11 Cable gland
Maintanance• Maintanance : Ballast & Lamp replacement from bottom
by gently pulling out the Ball lock fixed CRCA frame with acrylic and Reflector
Applications• Pharmaceutical
• Food industreis
• Electronics Industry
• Hospitals
Compliance• IP54
• Class I
CLEAN ROOM CLEAN ROOM
CLEAN ROOM ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Weight (kg) PF Ordering code
CRB 236CFL BO 2X36W CFL 240 0.31A HF <30% THD 5 0.95 L2540
CRB 414FTL BO 4X14W FTL 240 0.21A HF <10% THD 5 0.99 L2541
CRB 236CFL BO 2X36W CFL 240 0.31A HF <30% THD 5.3 0.95 L2542
CRB 414FTL BO 4X14W FTL 240 0.21A HF <10% THD 5.3 0.99 L2543
Mt Hole AvailableO 15.0mm
78
19
610
610
19
610
610 92
O 10Mt Hole
59
ALCOV - MO
Description High-performance, open version medium-bay luminaire
suitable for HPSV, MH and HPMV lamps
Specifications&Features• Die-cast aluminum gear base with black powder coating
• Hingeable pressure die-cast cover encloses gear compartment
• Lamp holder fixed to gear base with adaptor (MS) is held by pressure die-cast aluminum cup
• Gear base has capacitor, ignitor, lamp holder that are pre-wired up to the terminal block
• Fixed eye bolt, pressure die-cast aluminum cork holds SS cover lock
• High purity aluminum wide beam anodized reflector held in cup, for excellent lighting performance
• Silicon gasket between cover and gear base for ingress protection
• Provision of loop in / loop out facility with IP65 cable glands
Installation• 17mm inner diameter, eye bolt fixed to gear base to
facilitate mounting
• Cable gland for cable entry
Maintenance• Vertical luminaire opens by rotating cork in anti-clockwise
direction & rotate cover lock by 90o to open both covers
Applications• Rolling mills
• Generator rooms
• Workshops
• Aircraft hangers
Compliance• IP65 - Gear box compartment
• Class I
ALCOV - MO ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering code
Luminaire + Ballast + Reflector
Combined code
AL150SV+ARSM1 x 150W HPSV - E
240 0.85 EM, 150W HPSV 240V 50HZ IGN30L.G 20 0.85 L2037+L2280+L2011G ILALI50SVMO
AL150MH+ARSM1 x 150W
MH - E240 0.85 EM, 150W HPSV 240V 50HZ IGN30L.G 20 0.85 L2038+L2280+L2011G ILALI50MHMO
AL250SV+ARSM1 x 250W HPSV - E
240 1.4 EM, 250W HPSV 240V 50HZ IGN30L.G 33 0.85 L2034+L2281+L2011G ILAL250SVMO
AL250MH+ARSM1 x 250W
MH - E(KRC)240 1.3 EM, 250W KRC MH 240V 50HZ IGN30L.G 20 0.85 L2035+L2284+L2011G ILAL250MHMO
AL250MV+ARSM1 x 250W HPMV - E
240 1.3 EM, 250W HPMV 240V 50HZ IGN30L.G 20 0.85 L2036+L2284+L2011G ILAL250MVMO
AL400SV+ARSM1 x 400W HPSV - E
240 2.2 EM, 400W HPSV 240V 50HZ IGN30L.G 42 0.85 L2031+L2282+L2011G ILAL400SVMO
AL400MH+ARSM1 x 400W
MH - E(KRC)240 2.2 EM, 400W KRC MH 240V 50HZ IGN30L.G 25 0.85 L2032+L2283+L2011G ILAL400MHMO
AL400MV+ARSM1 x 400W HPMV - E
240 2.1 EM, 400W HPMV 240V 50HZ IGN30L.G 25 0.85 L2033+L2283+L2011G ILAL400MVMO
ALCOV - MO ALCOV - MO
284
341
17 193
277
416
60
ALCOV - ME
Description High-performance, enclosed version medium-bay luminaire
suitable for HPSV, MH and HPMV lamps
Specifications&Features• Die-cast aluminum gear base with black powder coating
• Hingeable pressure die-cast cover encloses gear compartment
• Lamp holder fixed to gear base with adaptor (MS) is held by pressure die-cast aluminum cup
• Gear base has capacitor, ignitor, lamp holder that are pre-wired up to the terminal block
• Fixed eye bolt, pressure die-cast aluminum cork holds SS cover lock
• High purity aluminum anodized wide beam reflector held in cup, for excellent lighting performance
• Silicon gasket between cover and gear base for ingress protection
• Provision of loop in / loop out facility with IP65 cable glands
• Tough and heat resistant glass
Installation• 17mm inner diameter, eye bolt fixed to gear base to
facilitate mounting
• cable gland for cable entry
Maintenance• Vertical luminaire opens by rotating cork in anti-clockwise
direction & rotate cover lock by 90o to open both covers
Applications• Rolling mills, Generator rooms, Workshops and Aircraft
hangers
Compliance• IP65
• Class I
ALCOV - ME ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering code
Luminaire + Ballast + Reflector
Combined code
AL150SV+ARSMG1 x 150W HPSV - E
240 0.85 EM, 150W HPSV 240V 50HZ IGN30L.G 20 0.85L2037 + L2280 +
L2013GILALI50SVME
AL150MH+ARSMG1 x 150W
MH - E240 0.85 EM, 150W HPSV 240V 50HZ IGN30L.G 20 0.85
L2038 + L2280 + L2013G
ILAL150MHME
AL250SV+ARSMG1 x 250W HPSV - E
240 1.4 EM, 250W HPSV 240V 50HZ IGN30L.G 33 0.85L2034 + L2281 +
L2013GILAL250SVME
AL250MH+ARSMG1 x 250W
MH -E(KRC)240 1.3 EM, 250W KRC MH 240V 50HZ IGN30L.G 20 0.85
L2035 + L2284 + L2013G
ILAL250MHME
AL250MV+ARSMG1 x 250W HPMV - E
240 1.3 EM, 250W HPMV 240V 50HZ IGN30L.G 20 0.85L2036 + L2284 +
L2013GILAL250MVME
AL400SV+ARSMG1 x 400W HPSV - E
240 2.2 EM, 400W HPSV 240V 50HZ IGN30L.G 42 0.85L2031 + L2282 +
L2013GILAL400SVME
AL400MH+ARSMG1 x 400W
MH - E(KRC)240 2.2 EM, 400W KRC MH 240V 50HZ IGN30L.G 25 0.85
L2032 + L2283 + L2013G
ILAL400MHME
AL400MV+ARSMG1 x 400W HPMV - E
240 2.1 EM, 400W HPMV 240V 50HZ IGN30L.G 25 0.85L2033 + L2283 +
L2013GILAL400MVME
ALCOV - ME ALCOV - ME
420
308
341
17 193
277
61
ALCOV - HO
Description High-performance, open version high -bay luminaire
suitable for HPSV, MH and HPMV lamps
Specifications&Features• Die-cast aluminum gear base with black powder coating
• Hingeable pressure die-cast cover encloses gear compartment
• Lamp holder fixed to gear base with adaptor (MS) is held by pressure die-cast aluminum cup
• Gear base has capacitor, ignitor, lamp holder that are pre-wired up to the terminal block
• Fixed eye bolt, pressure die-cast aluminum cork holds SS cover lock
• High purity aluminum anodized narrow beam reflector held in cup, for excellent lighting performance
• Silicon gasket between cover and gear base for ingress protection
• Provision of loop in / loop out facility with IP65 cable glands
Installation• 17mm inner diameter eye bolt fixed to gear base to
facilitate mounting
• Cable gland for cable entry
Maintenance• Vertical luminaire opens by rotating cork in anti-clockwise
direction & rotate cover lock by 90o to open both cover
Applications• Rolling mills
• Generator rooms
• Workshops
• Aircraft hangers
Compliance• IP65 - Gear box compartment
• Class I
ALCOV - HO ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PF
Ordering code
Luminaire + Ballast +Reflector
Combined code
AL250SV+ARSH 1 x 250W HPSV - E 240 1.4 EM, 250W HPSV 240V 50HZ IGN30L.G 33 0.85L2034 + L2281 +
L2010GILAL250SVHO
AL250MH+ARSH1 x 250W MH
-E(KRC)240 1.3
EM, 250W KRC MH 240V 50HZ
IGN30L.G 20 0.85L2035 + L2284 +
L2010GILAL250MHHO
AL250MV+ARSH 1 x 250W HPMV - E 240 1.3 EM, 250W HPMV 240V 50HZ IGN30L.G 20 0.85L2036 + L2284 +
L2010GILAL250MVHO
AL400SV+ARSH 1 x 400W HPSV - E 240 2.2 EM, 400W HPSV 240V 50HZ IGN30L.G 42 0.85L2031 + L2282 +
L2010GILAL400SVHO
AL400MH+ARSH1 x 400W MH -
E(KRC)240 2.2
EM, 400W KRC MH 240V 50HZ
IGN30L.G 25 0.85L2032 + L2283 +
L2010GILAL400MHHO
AL400MV+ARSH 1 x 400W HPMV - E 240 2.1 EM, 400W HPMV 240V 50HZ IGN30L.G 25 0.85L2033 + L2283 +
L2010GILAL400MVHO
ALCOV - HO ALCOV - HO
485
260
341
17 193
277
62
ALCOV - HE
Description High-performance, closed version high-bay luminaire
suitable for HPSV, MH and HPMV lamps
Specifications&Features• Die-cast aluminum gear base with black powder coating
• Hingeable pressure die-cast cover encloses gear compartment
• Lamp holder fixed to gear base with adaptor (MS) is held by pressure die-cast aluminum cup
• Gear base has capacitor, ignitor, lamp holder that are pre-wired up to the terminal block
• Fixed eye bolt, pressure die-cast aluminum cork holds SS cover lock
• High purity aluminum anodized narrow beam reflector held in cup, for excellent lighting performance
• Silicon gasket between cover and gear base for ingress protection
• Provision of loop in / loop out facility with IP65 cable glands
• Tough and heat resistant glass
Installation• 17mm inner diameter eye bolt fixed to gear base to
facilitate mounting
• Cable gland for cable entry
Maintenance• Vertical luminaire opens by rotating cork in anti-clockwise
direction & rotate cover lock by 90o to open both cover
Applications• Rolling mills
• Generator rooms
• Workshops
• Aircraft hangers
Compliance• IP65
• Class I
ALCOV - HE ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
codeCombined
code
Luminaire + Ballast + Reflector
AL250SV+ARSHG 1 x 250W HPSV - E 240 1.4 EM, 250W HPSV 240V 50HZ IGN30L.G 33 0.85L2034 + L2281 +
L2012GILAL250SVHE
AL250MH+ARSHG1 x 250W MH
-E(KRC)240 1.3 EM, 250W KRC MH 240V 50HZ IGN30L.G 20 0.85
L2035 + L2284 + L2012G
ILAL250MHHE
AL250MV+ARSHG1 x 250W HPMV
- E240 1.3 EM, 250W HPMV 240V 50HZ IGN30L.G 20 0.85
L2036 + L2284 + L2012G
ILAL250MVHE
AL400SV+ARSHG 1 x 400W HPSV - E 240 2.2 EM, 400W HPSV 240V 50HZ IGN30L.G 42 0.85L2031 + L2282 +
L2012GILAL400SVHE
AL400MH+ARSHG1 x 400W MH -
E(KRC)240 2.2 EM, 400W KRC MH 240V 50HZ IGN30L.G 25 0.85
L2032 + L2283 + L2012G
ILAL400MHHE
AL400MV+ARSHG1 x 400W HPMV
- E240 2.1 EM, 400W HPMV 240V 50HZ IGN30L.G 25 0.85
L2033 + L2283 + L2012G
ILAL400MVHE
487
271
341
17 193
277ALCOV - HE ALCOV - HE
63
ALCOV NON-INTEGRAL HE ALCOV NON-INTEGRAL HE
ALCOV-HE NON INTEGRAL ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast PF Ordering code Combined code
AL 254 NI+ARSHG-250
1 X 250W HPSV-E 240 1.4EM, 250W HPSV
240V 50Hz0.85 P0790+L2012G+L1901V2+L2284 ILALNI250SVHO
AL254 NI+ARSHG-400
1 X 400W HPSV-E 240 2.2EM, 400W HPSV
240V 50Hz0.85 P0790+L2012G+L1900V2+L2282 ILALNI400SVHO
ALCOV NON-INTEGRAL (NI) HE
Description Closed version non-integral high bay luminaire with heat
resistance toughned glass
Specifications&Features• Powder coated Pressure die cast aluminium Cup
accommodates Lamp holder which is prewired upto terminal block
• Anodised High bay reflector fixed with cup made of high purity aluminium ensures excellent lighting performance
• Separate die-cast control gear box comprises of Vacuum Impregnated polyster resin open construction ballast, Impulser type Ignitor
• Metalised PP film capacitor governs the electrical circuit
• Provision of loop in / loop out facility with IP65 cable glands
Tough and heat resistant glass
Installation• Eye Bolt with 17mm inner diameter fixed mounting bracket
to facilitate the mounting of the fixture
Maintainance• Vertical luminaire opens by rotating cork in anti-
clockwisedirection & rotate cover lock by 90o to open both cover
Applications• Flood lighting of dock yards
• Railway marshling yards
• Indoor industrial applications
Compliance• IP65
• Class I
487Ø
271
153
Ø 17
64
ALCOV NON-INTEGRAL (NI) HO
ALCOV-HO NON INTEGRAL ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast PF Ordering code Combined code
AL 254 NI+ARSH-250
1 X 250W HPSV-E 240 1.4EM, 250W HPSV
240V 50Hz0.85 P0790+L2010G+L1901V2+L2284 ILALNI250SVHO
AL254 NI+ARSH-400
1 X 400W HPSV-E 240 2.2EM, 400W HPSV
240V 50Hz0.85 P0790+L2010G+L1900V2+L2282 ILALNI400SVHO
ALCOV NON-INTEGRAL HO ALCOV NON-INTEGRAL HO
Description
It is an open version non-integral high bay luminaire
Specifications&Features• Powder coated Pressure die cast aluminium Cup
accommodates Lamp holder which is prewired upto terminal block
• Anodised High bay reflector fixed with cup made of high purity aluminium ensures excellent lighting performance
• Separate die-cast control gear box comprises of Vacuum Impregnated polyster resin open construction ballast, Impulser type Ignitor
• Metalised PP film capacitor governs the electrical circuit
Installation• Eye Bolt with 17mm inner diameter fixed mounting bracket
to facilitate the mounting of the fixture
Maintainance
• Vertical luminaire opens by rotating cork in anti-clockwise direction & rotate cover lock by 90o to open both cover
• Cable gland for cable entry
Applications• Flood lighting of dock yards
• Railway marshling yards
• Indoor industrial applications
Compliance• IP65
• Class I
485Ø
260
153
Ø17
65
ALCOV PRISMATIC
Description High performance prismatic high bay luminaire suitable for
HPSV, MH and HPMV lamps
Specifications&Features• Housing : Black powder coated Pressure Diecast gear base
with hingeable pressure die cast cover acts as enclosure for gear compartment and pressure die cast aluminium cup accomodates lamp holder
• Reflector : Prismatic Acrylic Reflector
• Cover : Prismatic Acrylic
• Ingress Protection : IP65 for gear compartment
• Pressure Die cast aluminium cork which is fixed on Eye bolt holds SS Cover lock for the fitment ofboth the covers
• Control gear: Gear base accomodates HID ballast, impulse ignitor & power factor improvement capacitor
• Termination: 4 way,10A, PBT connector
• Lamp holder: E40 porcelain lamp holder
Installation• Mounting : Eye Bolt with 13mm inner diameter fixed with
gearbase facilitate the mounting
• Cable entry : Through a PG11 cable gland
Maintenance
• Fixture can be opened for maintenance by rotating cork in anticlockwise direction for releasing the tension in cover lock,after releasing cork rotate the cover lock 90° to open both covers
Applications• Warehouses
• Retail
• Indoor sports hall
Compliance• IP65 for Gear compartment
• Class I
ALCOV PRISMATIC ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast
Weight (kg)
PFOrdering
codeCombined
code
AL400SV + PRHE HPSV400W-E 240 2.2 BVSM400 8.7 0.85 L2031+L2282+L2040 ILALPR400SV
AL400MH + PRHE HH400W-E (KRC) 240 2.2 BVHM400 8.7 0.85 L2032+L2283+L2040 ILALPR400MH
AL400MV + PRHE HPMV400W-E 240 1.85 BVHM400 8.7 0.85 L2033+L2283+L2040 ILALPR400MV
AL250SV + PRHE HPSV250W-E 240 1.4 BVSM250 6.7 0.85 L2034+L2281+L2040 ILALPR250SV
AL250MH + PRHE MH250W-E(KRC) 240 1.4 BVHM250 6.7 0.85 L2035+L2284+L2040 ILALPR250MH
AL250MV + PRHE HPMV250W-E 240 1.35 BVHM250 6.7 0.85 L2036+L2284+L2040 ILALPR250MV
AL150SV + PRHE HPSV150W-E HPSV150W-E 240 0.8 BVSM150 5.7 0.85 L2037+L2280+L2040 ILALPR150SV
ALCOV PRISMATICALCOV PRISMATICO13
277
663
303
410O
66
ECHELON - OPEN / ECHELON - CLOSED
Description High performance, industrial medium-bay luminaire for T5
fluorescent lamp
Specifications&Features• Available in open & closed acrylic cover options
• Its T5 high lumen package allows application of fluorescent lamps at high mounting heights
• Exceptional color rendering index, high system efficiency, 95% lumen maintenance, long lamp life, instant on, instant re-strike, optional economical dimming and uniform brightness control
• CRCA MS sheet and black powder coated T5 medium-bay luminaire
• Has high frequency ballast & lamp holders that are pre-wired up to the terminal block
• High purity imported electro-chemically anodized multi faceted reflector for excellent optical performance
• End cover made up of CRCA MS sheet
• Ballast accessible through end covers
Installation• 2, 19mm dia. slots facilitate conduit mounting
• 4, 5mm dia. slots facilitate surface mounting
• Optional suspension mounting assembly
Maintenance• Easy re-lamping by rotating lamp for open version and
remove frame for closed version
• Provision of grommet for cable entry
Applications• Warehouses
• Industries
• Gymnasium
Compliance• IP20 for open version IP54 for closed version
• Class I
ECHELON OPEN ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
EHO414 4 x 14W FTL T5 240 0.29 HF, 4x14W, 176-265V NA NA 0.99 L2065
EHO424 4 x 24W FTL T5 240 0.42 HF, 2x24W, 176-265V NA NA 0.99 L2067
EHO428 4 x 28W FTL T5 240 0.56 HF, 2x28W, 176-265V-2NOS NA NA 0.99 L2063
EHO454 4 x 54W FTL T5 240 0.96 HF, 2x54W, 176-265V-2NOS NA NA 0.99 L2061
ECHELON CLOSED
EHC414 4 x 14W FTL T5 240 0.29 HF, 4x14W, 176-265V NA NA 0.99 L2066
EHC424 4 x 24W FTL T5 240 0.42 HF, 2x24W, 176-265V NA NA 0.99 L2068
EHC428 4 x 28W FTL T5 240 0.56 HF, 2x28W, 176-265V-2NOS NA NA 0.99 L2064
EHC454 4 x 54W FTL T5 240 0.96 HF, 2x54W, 176-265V-2NOS NA NA 0.99 L2062
ECHELON - OPEN
ECHELON - CLOSED
ECHELON - OPEN
ECHELON - CLOSED
A
Suspensionmounting
CeilingMounting
D
360.0280.0 B
C
Suspensionmounting
CeilingMounting
360.0280.0
A
D
MODEL DIMENSIONS (MM)A B C D
EHO 454 / EHO 428EHO 414 / EHO 424
1375 419 50 1315775 419 50 715
MODELDIMENSIONS (MM)
A B C D
EHO 454 / EHO 428EHO 414 / EHO 424
1375 419 50 1315775 419 50 715
67
EIFFEL - OPEN / EIFFEL - CLOSED
Description Innovative optics high lumen high-bay luminaire for
T5 fluorescent lamp
Specifications&Features• Available in open version and closed clear acrylic cover
version
• CRCA powder coated body
• Has a pre-anodized imported aluminum reflector and high frequency electronic ballast
• ‘Fusion’ optics i.e. symmetric & asymmetric distribution of optical compartment provides balanced vertical and horizontal illumination
• It is an ideal solution for industrial high-bay (MH >6m) application
• Loop in / loop out arrangements available
Installation• CRCA brackets facilitate conduit and suspension mounting
Maintenance• Easy access to ballast and connector by removing
ballast cover
• Lamping / re-lamping can be easily done by releasing toggles
Applications• Shop floor
• Warehouses
• High-ceiling retail malls
Compliance• IP20 for open version and IP54 for closed version
• Class I
EIFFEL OPEN ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
ELO428 4 x 28W FTL T5 240 0.56 HF, 2x28W, 176-265V-2NOS NA NA 0.99 L2142
ELO454 4 x 54W FTL T5 240 0.96 HF, 2x54W, 176-265V-2NOS NA NA 0.99 L2141
EIFFEL CLOSED
ELC428 4 x 28W FTL T5 240 0.56 HF, 2x28W, 176-265V-2NOS NA NA 0.99 L2144
ELC454 4 x 54W FTL T5 240 0.96 HF, 2x54W, 176-265V-2NOS NA NA 0.99 L2143
EIFFEL - OPEN
EIFFEL - CLOSED EIFFEL - CLOSED
EIFFEL - OPEN
65
1201
458
1120
1084
20
5
105
105
65
1201
458
1120
1084
20
5
78
68
VELLO
Description Integral wall-glass, weather proof luminaire suitable for
suspension mounting available for wattages 70W, 80W, 125W, 160W, and non-integral available in 150W
Specifications&Features• Integral well glass luminaire suaitable for High Pressure
Sodium Vapour 70w(E) lamp.
• Pressure die cost aluminium housing (Lm6), which offers excellent corrosion resistance. It accommodates CRCA zinc plated geartray, powder coated CRCA reflector, capacitors, ignior & lampholder prewired upto terminal block.
• Powder coated CRCA ring hinged from one side and fixed to the housing by means of toggle, to hold the heat resistance glass cover with powder coated wire guard made of MS along with specially design EPDM gasket to ingress protection IP65.
• The lamping/relamping & the acess to the gear components can be done easly just by releasing the toggle,
• Inbuilt Eye Bolt orrangement with 18mm inner diameter facilitate the mounting of the fixture.
• Provided IP 65 cable gland (PG9) which can accommodate max, 7mm cable in one hole & remaining with Grommet to facilitate Loop in loop out connection.
• Vacuum Imprignated polyster resin open construction ballast, Impulser tyep ignitor and Metalised PP film capactor governs the electrical circuit.
Installation & maintenance• Inbuilt eye bolt arrangement with 18mm inner diameter for
mounting
• Accessible gear tray
• Easy relamping by opening hingeable ring
• Loop in , loop out cabling facility with IP65 cable gland for one hole only
Applications• Industries
• Power stations
• Boiler platforms
• Shopping malls
• Tunnels
• Parking lots
Compliance• IP65
• Class I
VELLO ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
LUMINAIRE + BALLAST
VLSV70I 1 x 70W HPSV 240 0.45 EM, 70W HPSV 240V 50HZ V230002.G 12 0.85 L1751A
VLSV70IGS 1 x 70W HPSV IGS 240 0.45 EM, 70W HPSV 240V 50HZ NA 12 0.85 L1752A
VLMV80WI 1 x 80W HPMV 240 0.45 EM, 80W HPMV 240V 50HZ NA 8 0.85 L1753A
VLMV125WI 1 x 125W HPMV 240 0.63 EM, 125W HPMV 240V 50HZ NA 12 0.85 L1754A
VL160W 1 x 160W ML 240 0.75 NA NA NA 0.85 L1755A
VLSV150W NI 1 x 150W HPSV-E 240 0.85 EM, 150W HPSV 240V 50HZ V230002.G 20 0.85 ILVNII50SV
VL42CFL 1 x 42W CFL TBX 240 0.21 HF, 42W CFL 240V 50HZ NA NA 0.95 L1756A
VL26CFL 1 x 26W CFL DBX 240 0.32 EM, 26W CFL 240V 50HZ NA NA 0.85 L1757A
VELLO VELLO
327
210
O 18
197O
69
BULK HEAD
Description Industrial die-cast aluminum powder coated in white bulk-
head luminaire suitable for GLS and compact flourescent lamps
Specifications&Features• Has a housing and a glass cover
• Wire guards for protecting glass cover
• Adequately EPDM gasketed glass with protective wire guard
• Die-cast aluminum made single piece housing
• Heat resistant glass cover
• Black powder coated wire guard
• Weather proof constructed luminaire
• Control gear bon: EM ballast
• Termination: 2way, 10A PBT connector
• Lamy holder: E27 lamy holder for GLS
• Lamy holder: 2 pin lamy holder for CFL
Installation• Two legs with slots facilitate wall and ceiling mounting
Maintenance• Re-lamping by release of fasteners, wire guard and
cover glass removal
• Canopy inlet provides cable entry
Applications• Security lighting in industries
• Housing colonies
• Staircases
Compliance• IP54
• Class I
BULK HEAD ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Weight (kg)
Capacitor (Mfd)
PFOrdering
code
GECPLI1X10VH 1X10W DBX CFL P0059A 0.17A 10W EM 1 0.17A 0.5 P0059A
GEGLSI1X60BH 1X60GLS P0245A 0.25A NA 1 0.25A >0.99 P0245A
BULK HEAD BULK HEAD
137
202
140
149
9
and environment lightingroadway
and environment lightingroadway
ROADWAY LIGHTING
NORA V2 73
GEN X-70 74
BONETE / BONETE Jr 75
BONETE - G / BONETE - G Jr 76
OPTYLANE V2 77
RANGER V2 78
GEN X 79
SKYGEN 80
MET 40 81
OLYMPIA 82
COROL 83
QUNA 84
SPECTRA 85
ENVIRONMENT LIGHTING
ORANE BOLLARD 86
GLITRA WALL MOUNT 87
ORANE POST TOP 88
DUNA 89
73
NORA V2
Description Road lighting luminaire suitable for T5 fluorescent lamps
Specifications&Features• Pressure die cast aluminum housing body with futuristic
styling design with powder coated
• UV protected clear acrylic diffuser exclusively thermoformed for bright ambience
• Seven SS toggles ensures ingress protection
• Removable CRCA powder coated gear tray for easy maintenance of electrical accessories
• Push fit poly-carbonate lamp holder
• Option with 1x14W, 2x14W, 1x24W, 2x24W T5 lamps
• Low loss high frequency pre heat ballast
Installation• In-built “pole mounting adaptor” suitable for diameter of
40mm pole
Maintenance• Hingeable toggle for easy re-lamping
• Removable gear tray assembly for lamp / ballast replacement
Applications• Secondary road
• Industrial area lighting
• Passage lighting
• Pool lighting
• Security
Compliance• IP54
• Class I
NORA V2 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast PF
Ordering code
NA124NG V2 1 x 24W FTL T5 240 0.11 HF, 1x24W, 176-265V 0.99 L2480V2
NA124SG V2 1 x 24W FTL T5 240 0.11 HF, 1x24W, 176-265V 0.99 L2481V2
NA224NG V2 2 x 24W FTL T5 240 0.24 HF, 2x24W, 176-265V 0.99 L2484V2
NA224SG V2 2 x 24W FTL T5 240 0.24 HF, 2x24W, 176-265V 0.99 L2485V2
NA114NG V2 1 x 14W FTL T5 240 0.08 HF, 1x14W, 176-265V 0.99 L2482V2
NA114SG V2 1 x 14W FTL T5 240 0.08 HF, 1x14W, 176-265V 0.99 L2483V2
NA214NG V2 2 x 14W FTL T5 240 0.14 HF, 2x14W, 176-265V 0.99 L2486V2
NA214SG V2 2 x 14W FTL T5 240 0.14 HF, 2x14W, 176-265V 0.99 L2487V2
NORA V2 NORA V2
760
Suitable to accomodate Pipe Dia < 43mm
130
108
74
GEN X-70
Description Top opening integral road lighting luminaire suitable for
70W HPSV and MH tubular lamp
Specifications&Features• Die-cast front visor with tough and heat resistant glass
cover for lamp and detachable control gear compartment
• Highly pure, aluminum anodized reflector for excellent lighting
• Electrical circuit consists of vacuum impregnated polyester resin open construction ballast, electronic ignitor and metalised PP film capacitor
• Silicon / EPDM gaskets as per ingress protection IP65
Installation• Die-cast aluminum “pole mounting spigot”
• Suitable for 40mm dia. pole for both, horizontal as well as vertical pole mounting
Maintenance• ‘Press push mechanism’ for gear tray and lamp
compartment maintenance
Applications• City sub lanes
• Parking areas
• Industrial areas and roads with less traffic density
Compliance• IP65
• Class I
GEN X-70 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PF
Ordering code
Luminaire + Ballast
Combined code
GX70SV/NG 1 x 70W HPSV - T 240 0.45 EM, 70W HPSV 240V 50HZ V230002.G 12 0.85 L2091+ L2279 RWGEN70SVNG
GEN X-70 GEN X-70Suitablef or Dia4 0Pole
140
197
470
75
BONETE / BONETE Jr
Description Integral road lighting luminaire suitable for HPSV, MH and
HPMV lamps
Specifications&Features• Single piece deep drawn stove enameled with hammer
tone gray finish
• Highly transparent, clear acrylic cover for lamp and detachable control gear compartment
• Pre-wired with power factor improvement capacitor, electronic ignitor, mains connector and rubber gasket
• Weather proof
• Anodized and imparted sand-blasting, finished lamp compartment acts as reflector for optimal light distribution and glare control
Installation• Anti-corrosive stainless steel toggle holds the acrylic cover
• Cable entry is through mounting pipe
• Terminals provided on the mains connector inside control gear housing
Maintenance• Maximum 60mm outer diameter pipe for Bonete
• Maximum 50mm outer diameter pipe for Bonete Jr
Applications• City roads
• Road junctions and fly overs with higher road traffic
Compliance• IP54
• Class I
BONETE ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PF
Ordering code
Luminaire + Ballast
Combined code
GESR1X70DDPT 1 x 70W HPSV - T 240 0.45 EM, 70W HPSV 240V 50HZ V230002.G 12 0.85 L0662A + L2279 RWB070SVA
GESR1X150DDPT 1 x 150W HPSV - T 240 0.85EM, 150W HPSV 240V
50HZV230002.G 20 0.85 L0663A + L2280 RWB0150SVA
GESR1X250DDPT 1 x 250W HPSV - T 240 1.40EM, 250W HPSV 240V
50HZV230002.G 33 0.85 L0664A + L2281 RWB0250SVA
BONETE BONETE Jr. BONETE Jr.BONETE
328
294
62
170
614.0
290.
0
520.5
223.
5
54.5
160.
0
76
BONETE - G / BONETE - G Jr
Description Integral road lighting luminaire suitable for HPSV, MH, HPMV
lamps with glass cover
Specifications&Features• Single piece deep drawn stove enameled with hammer
tone gray finish
• Tough, heat resistant glass cover for lamp and detachable control gear compartment
• Pre-wired with power factor improvement capacitor, electronic ignitor, mains connector and rubber gasket
• Weather proof and free from insect entry
• Anodized and imparted sand-blasting, finished lamp compartment acts as reflector for optimal light distribution and glare control
Installation• Anti-corrosive stainless steel toggle holds the glass cover
• Cable entry is through mounting pipe
• Terminals provided on the mains connector inside control gear housing
Maintenance• Maximum 60mm outer diameter pipe for Bonete Glass
• Maximum 50mm outer diameter pipe for Bonete Glass Jr
Applications• Parking areas
• Industrial areas
• Sublanes
• City roads
• Road junctions and fly overs with higher road traffic
Compliance• IP65
• Class I
BONETE - G BONETE - G Jr. BONETE - G Jr.BONETE - G
g
174.
0
618.0
294
62.0 16
5
520.5
223.
5
54.5
166
BONETE - G ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PF
Ordering code
Luminaire + Ballast
Combined code
GESR1X70DDPT/GLASS
1 x 70W HPSV - T 240 0.45 EM, 70W HPSV 240V 50HZ V230002.G 12 0.85 P0146 + L2279 RWB070SVG
GESR1X150DDPT/GLASS
1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ V230002.G 20 0.85 P0128 + L2280 RWB0150SVG
GESR1X250DDPT/GLASS
1 x 250W HPSV - T 240 1.40 EM, 250W HPSV 240V 50HZ V230002.G 33 0.85 P0129 + L2281 RWB0250SVG
77
OPTYLANE V2
Description Integral road lighting luminaire suitable for 150W, 250W
HPSV and 250WMH tubular lamps
Specifications&Features• Having made of single piece of pressure die-cast aluminum
with powder coated
• Available in half glass & full glass screen
• Tough and heat resistant glass for enclosure for optical and gear compartment
• Pre-wired up to mains connector
• Highly pure, anodized aluminum reflector for excellent lighting
• Electrical circuit consist of vacuum impregnated polyester resin, open construction ballast, impulser type ignitor and metalised PP film capacitor
• EPDM gaskets
• Termination: 2 way 15A, PBT connector
• Lamy holder: EH0 lamy holder
Installation• In-built “pole mounting spigot”
• Suitable for 60 mm dia pole
Maintenance• Gear and lamp compartment is accessible by opening
the hingeable glass and releasing the SS toggles
Applications• City roads
• Road junctions and fly overs with higher road traffic
Compliance• IP65
• Class I
OPTYLANE V2 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering code
Luminaire + BallastCombined
code
OG150V2 1 x 150W HPSV - T 240 0.85A BVSM150 V230002.G 20 0.85 L1847V2+ L2280 RWOP150SV
OG250V21 x 250W HPSV - T/MH
-T(ARC)240 1.4A BVSM250 V230002.G 33 0.85 L1841V2 + L2281 RWOP250SV
OPTYLANE V2 OPTYLANE V2Suitable for Dia. 60 mm pole.
623
155
243
78
RANGER V2
Description Pressure die cast road lighting luminaire suitable for HPSV
and MH tubular lamps
Specifications&Features• Housing made of pressure die cast aluminum powder
coated in new grey ensure excellent corrosion resistance
• Anodized high purity aluminum reflector
• Front cover option available in UV protected acrylic cover or toughened, heat resistant glass
• Pre-wired with vacuum impregnated OC ballast, electronic ignitor and metalised PP capacitor
• Termination by 2 way , 10A PBT connector
• EPDM gasket with glass version & felt in acrylic version for in glass protection
Installation• In-built pole mounting adaptor suitable for 60mm dia. pole
• Cable entry through 10 mm diagrommet
Maintenance• Lamp and ballast replaced by releasing SS toggles
Applications• City roads
• Road junctions
• Fly overs
Compliance• IP54 – Acrylic version
• IP66 – Toughened glass
• Class I
RANGER V2 ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal Voltage
(V)
Mains Current
(A)Ballast Ignitor
Capacitor (mfd)
PFOrdering
CodeCombined
Code
RA150 V2 GL 150W HPSV-T/MH-T 240 0.85 BVSM150 V230002.G 20 0.85L2273V2 +
L2280RWRA150SVG
RA250 V2 GL 250W HPSV-T/MH-T(ARC) 240 1.45 BVSM250 V230002.G 33 0.85L2271V2 +
L2281RWRA250SVG
RA400 V2 GL 400W HPSV-T/MH-T(ARC) 240 2.20 BVSM400 V230002.G 42 0.85L2270V2 +
L2282RWRA400SVG
Ranger V2 Acrylic
RA150 V2 AC 150W HPSV-T/MH-T 240 0.85 BVSM150 V230002.G 20 0.85L2274V2 +
L2280RWRA150SVA
RA250 V2 AC 250W HPSV-T/MH-T(ARC) 240 1.45 BVSM250 V230002.G 33 0.85L2272V2 +
L2281RWRA250SVA
RANGER V2 RANGER V2
Suitable for Dia 60 Pole
595
268
306
Suitable for Dia 60 Pole
595
130
306
79
GEN X
Description Top opening integral road lighting luminaire suitable for
HPSV and MH tubular lamps
Specifications&Features• Housing and the top cover made from single piece of die-
cast aluminum with powder coated on the outer surface
• Die-cast front visor with tough and heat resistant glass cover for lamp and detachable control gear compartment
• Pre-wired with power factor improvement capacitor, electronic ignitor, mains connector
• EPDM gaskets makes luminaire weather proof and free from insect entry
• High purity, aluminum made ‘Precision Optics’ reflector for excellent lighting performance
Installation• In-built “pole mounting spigot”
• Suitable for 60mm dia pole for both, horizontal as well as vertical pole mounting
• Cable entry is through mounting pipe
Maintenance• ‘Press push mechanism’ for gear tray and lamp
compartment maintenance
• Mains connector inside control gear housing
Applications• City roads
• Road junctions and flyovers with higher road traffic
Compliance• IP65
• Class I
GEN X ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PF
Ordering code
LUMINAIRE + BALLAST
Combined code
GX150SVNG 1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ V230002.G 20 0.85 L1580 + L2280 RWGEN150SVNG
GX250SVNG 1 x 250W HPSV - T 240 1.40 EM, 250W HPSV 240V 50HZ V230002.G 33 0.85 L1572 + L2281 RWGEN250SVNG
GX250MHNG 1 x 250W MH(ARC) - T 240 1.40 EM, 250W MH 240V 50HZ V230002.G 33 0.85 L1576 + L2281 RWGEN250MHNG
GEN X GEN X
622
179
260
SuitableforDia60Pole
80
SKYGEN
Description High pressure die-cast road light luminaire suitable for
150W to 600WHPSV and 250W, 400W MH tubular lamp with curved glass
Specifications&Features• Innovative exterior design (patent 02398189.0), high
pressure aluminum die-cast two part housing
• High purity anodized aluminum reflector provides best optical performance
• Tempered glass with GE silicon sealing
• Optional charcoal filter provision upon request
• Passed 2G 3 dimensional 100,000 times vibration test
• Electrostatic surface painting with 5 different standard RAL color availability
• 4 lamp holder positions match different optical requirements
Installation• Housing and cover are protected from collapsing by
stainless steel spring
• Side mounting has multiple mounting angle
• Easy installation
Maintenance• Control gear housing facilitates pole mounting for
40-60mm outer diameter both for post top and lateral installations
Applications• Major & minor roads
• Urban areas
• Industrial areas
• Parking lots
• Main roadways
Compliance• IP66 optics for lamp compartment
• Class I
SKYGEN ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
SGN25S6SG 1 x 250W HPSV/MH(ARC) - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF20229
SGN40S6SG 1 x 400W HPSV/MH(ARC) - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF20230
SGN60S6SG 1 x 600W HPSV - T 240 3.00 EM, 600W MH 240V 50HZ SIP,240V-50Hz 60 0.85 AF20073
SKYGEN SKYGEN
81
MET 40
Description Road light luminaire with die-cast aluminum housing and
tempered curved glass suitable for 150W, 250W and 400W HPSV and metal halide lamps
Specifications&Features• Streamlined appearance
• Die-casting aluminium housing
• Curve tempered glass
• Electrostatic spray coating surface
• Passed 2G 3D 100,000 times vibration
• Stainless steel clips & aluminium alloy hinge
• Bi-level dimming gear system available
• Optional membrane filter, Auto power off system, PE controller on request
Installation• Suitable for outer diameter of pole 48-60mm
Installation angle from 0 to 15 degree
Maintenance• Lamp maintenance without tools
Applications• Streets & roadways
• Highway & overhead road
• Industry parks
• Commercial plaza
• Packing lots
Compliance• IP66 optics
• Class I
MET 40 MET 40
MET 40 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
MET15AS6WA 1 x 150W HPSV/MH - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF21304
MET15BS6WA 1 x 150W HPSV/MH - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF21140
MET25AS6WA 1 x 250W HPSV/MH(ARC) - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF21306
MET25BS6WA 1 x 250W HPSV/MH(ARC) - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF21141
MET40AS6WA 1 x 400W HPSV/MH(ARC) - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF21308
MET40BS6WA 1 x 400W HPSV/MH(ARC) - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF21142
82
OLYMPIA
Description Integral road lighting luminaire suitable for 150W / 250W /
400W HPSV and MH tubular lamp
Specifications&Features• Patented surrealistic housing design
• Pressure die- cast aluminum housing provides long lasting structural reliability
• Formed high purity anodized aluminum reflector provides high lighting output, optical beam control and visual comfort
• GE silicon sealing gasket between reflector and the toughened glass lens
• Passed 2G 3 dimensional 100,000 times vibration test
• Metallic paint used over anti-corrosion premier for excellent housing finish and quality
Standard color White Aluminum– RAL9006
• Optional charcoal filter provision upon request
• Bi-level dimming gear system available upon request for energy saving
Installation• Suitable for 54 - 62 mm (outer diameter) pole arm
• Supporting pad has three adjusting steps
Maintenance• Pole can be put onto the O0 step if D is not equal to 60mm
or onto three steps (0”,2.5”,5”) stainless steal screw
• F10 stainless screws ensure easy removal of luminaire for maintenance and lamp replacement
Applications• Highways
• Urban areas
• Industrial parks
• Parking lots
• Main roadways
Compliance• IP66 optics
• Class I
OLYMPIA OLYMPIA
Installation height: <16mluminairee weight: 15.4kgMaximum projection area: 0.28Sqm
225
858
410
OLYMPIA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
OLY15AS6EWA-M 1 x 150W HPSV/MH - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF21329
OLY25AS6EWA-M 1 x 250W HPSV/MH(ARC) - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF21330
OLY40AS6EWA-M 1 x 400W HPSV/MH(ARC) - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF21331
83
COROL
Description GE patented industrially designed road lighting luminaire
suitable for 150W / 250W / 400W HPSV and MH tubular lamp
Specifications&Features• Pressure die-cast aluminum housing provides long lasting
structural reliability
• High purity anodized aluminum reflector provides superior lighting output and outstanding uniformity
• Tempered glass with GE Silicon sealing
• Passed 2G 3 dimensional 100,000 times vibration test
• Metallic paint used over anti-corrosion premier for excellent housing finish and quality
Standard color White Aluminum– RAL9006
• Optional charcoal filter provision upon request
• Bi-level dimming gear system available upon request for energy saving
Installation• In-built “pole mounting spigot”
• Suitable for 60mm dia. pole
Maintenance• Easy maintenance and lamp replacement
Applications• Highways
• Urban areas
• Industrial parks
• Parking lots
Compliance• IP66 optics
• Class I
COROL ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
COR15AS6EWA-M 1 x 150W HPSV/MH - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF21163
COR25AS6EWA-M 1 x 250W HPSV/MH(ARC) - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF21164
COR40AS6EWA-M 1 x 400W HPSV/MH(ARC) - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF21165
COROL COROL
Installation height: <16mluminairee weight: 12-14kgMaximum projection area: 0.3Sqm (up and down)Effective projected area: 0.1Sqm
518
814
263
84
QUNA
Description Road light luminaire with die cast aluminum housing and
tempered glass with GE silicon sealing suitable for 150W and 250W HPSV/MH lamps
Specifications&Features• Die-casting aluminum housing
• High purity anodized aluminum reflector
• Tempered glass lens sealed with GE Silicon sealing
• Maintenance without tools
• Electrostatic surface painting
• Charcoal filter as option
• Anti-drop as option
• Lamp: 100W, 150W, 250W
Installation• Suitable for outer diameter of pole 48-52mm
Maintenance• Tool less maintenance
Applications• Collector street
• Industrial park
• Parking lots
• Countryside street
• Commercial Plaza
Compliance• IP66 optics
• Class I
QUNA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
QUN15AS6WA 1 x 150W HPSV/MH - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF21469
QUN25AS6WA 1 x 250W HPSV/MH(ARC) - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF21470
QUNA QUNA
85
SPECTRA
Description CMH Road light luminaire with compact and stream lined
appearance die cast aluminum housing and tempered curved glass suitable for CMH-T G12 lamps
Specifications&Features• Streamline & compact appearance
• Die-casting aluminum housing
• High reflectivity reflector, made with 99.9% purity anodized aluminum
• Tempered glass lens sealed with GE Silicon sealing
• Toolless maintenance
• Adjustable bracket of pole arm. Designed by GE with intelligence patent
• Passed 2G 3D 100,000 times vibration test
• Charcoal filter as option
• Anti-drop as option
Installation• Suitable for outer diameter of pole of 42-48mm dia
• Installation angle can be adjusted from 0°, 10° and 20° vertically and horizontally
Maintenance• Tool less maintenance
Applications• Roadway
• Garden Street
• Parking lot
• Commercial Plaza
Compliance• IP66 optics
• Class I
SPECTRA SPECTRA
SPECTRA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
SPE03CM6G12WA 1 x 35W CMH - G12 240 0.25 EM, 35W CMH 240V 50HZ SIP,240V-50Hz 6 0.85 AF20978
SPE07CM6G12WA 1 x 70W CMH - G12 240 0.45 EM, 70W CMH 240V 50HZ SIP,240V-50Hz 12 0.85 AF20979
SPE07CM6E27WA 1 x 70W CMH - T 240 0.45 EM, 70W CMH 240V 50HZ SIP,240V-50Hz 12 0.85 AF20980
SPE15CM6G12WA 1 x 150W CMH - G12 240 0.85 EM, 150W CMH 240V 50HZ SIP,240V-50Hz 20 0.85 AF20982
86
ORANE BOLLARD
Description Outdoor city beautification post top luminaire suitable for
compact fluorescent lamps
Specifications&Features• Housing made of powder coated, die-cast aluminum
• Diffuser is made of high density polyethylene
• Body is made of aluminum extrusion with close finish design features
• Base anchor is made of die-cast aluminum, powder coated with wrinkle finish which matches to the housing
• Options available in various colors
• Electromagnetic ballast
• EPDM gasket
Installation• Can be done with two M6 stud and nut
Maintenance• Cable entry is through bottom part of the base anchor
• Easy to access the lamp and accessories with aid of two allen screw
• Lamp and ballast can be replaced from top
Applications• Landscape
• Passage
Compliance• IP65
• Class I
ORANE BOLLARD ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
ORE18 - BB 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2330
ORE18 - AA 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2331
ORE18 - GG 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2332
ORE18 - AB 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2333
ORE18 - BS 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2334
ORE26 - BB 1 x 26W CFL DBX 240 0.32 EM, 1x26W 240V 50HZ NA NA 0.40 L2335
ORE26 - AA 1 x 26W CFL DBX 240 0.32 EM, 1x26W 240V 50HZ NA NA 0.40 L2336
ORE26 - GG 1 x 26W CFL DBX 240 0.32 EM, 1x26W 240V 50HZ NA NA 0.40 L2337
ORE26 - AB 1 x 26W CFL DBX 240 0.32 EM, 1x26W 240V 50HZ NA NA 0.40 L2338
ORE26 - BS 1 x 26W CFL DBX 240 0.32 EM, 1x26W 240V 50HZ NA NA 0.40 L2339
ORANE BOLLARD ORANE BOLLARD
Mounting Hole Suitable for M6 Bolt230.0
114
889.
7
25.0
889.
7
195.0
87
GLITRA WALL MOUNT
Description Outdoor city beautification, wall mounted luminaire suitable
for compact fluorescent lamps
Specifications&Features• Housing made of powder coated, die-cast aluminum
• Diffuser is made of high density polyethylene
• Frame is made of powder coated, die-cast aluminum
• Colour options: Black, green and antique silver
• EPDM gasket
Installation• Can be done with 4 self tapping screw suitable for 5mm
diameter
Maintenance• Cable entry is through 9mm grommet
• Lamp and ballast can be replaced from front
Applications• Portico
• Landscape
• Car parking
• Pool area
• Passage
• Corridor
Compliance• IP65
• Class I
GLITRA WALL MOUNT
ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
GLE18 - B 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2352
GLE18 - G 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2353
GLE18 - A 1 x 18W CFL DBX 240 0.18 EM, 1x18W 240V 50HZ NA NA 0.50 L2354
GLITRA WALL MOUNT
MOUNTING HOLE
MOUNTING HOLE
MO
UN
TIN
G H
OLE
108
361
283
240
230.
0
140.0
100.0
GLITRA WALL MOUNT
88
ORANE POST TOP
Description Outdoor city beautification, post top luminaire suitable for
compact fluorescent lamps
Specifications&Features• Housing made of powder coated, die-cast aluminum
• Diffuser is made of high density polyethylene
• Pole adapter is made of powder coated, die-cast aluminum
• Colour options: Black, green and antique silver
• EPDM gasket
• HF ballast
• The exclusive HDPE light diffusers ensures smooth glare free light effect on surrounding
Installation• Can be done with three stud on the port
Maintenance• Cable entry is through 9mm grommet from pipe adapter
• Easy to access the lamp and accessories with aid of two allen screw
• Lamp and ballast can be replaced from top
Applications• Landscape
• Passage
Compliance• IP65
• Class I
ORANE POST TOP ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast
Weight (kg)
PFOrdering
code
OPE 18-B 18 W CFL 240 0.125 A HF 18Watt 1.1 >0.60 L2374
OPE 18-G 18 W CFL 240 0.125 A HF 18Watt 1.1 >0.60 L2375
OPE 18-A 18 W CFL 240 0.125 A HF 18Watt 1.1 >0.60 L2377
OPE 18-B 26 W CFL 240 0.18 A HF 26Watt 1.1 >0.60 L2379
OPE 18-G 26 W CFL 240 0.18 A HF 26Watt 1.1 >0.60 L2378
OPE 18-A 26 W CFL 240 0.18 A HF 26Watt 1.1 >0.60 L2380
ORANE POST TOP ORANE POST TOP
Suitable for dia. 40~60 mm pole
371
225 114
89
DUNA DUNA
DUNA
Description Outdoor decorative luminaries suitable for HPSV and MH
lamps up to 150W
Specifications&Features• Base is made of die cast aluminum pole
• Mounting device consist of PG-13.5 cable gland for a perfect sealing
• One piece die - cast aluminum body with three decorative arms and two rings
• Supports optical components and control gear assembly
• Upper housing made of one-piece spun aluminum
• Anti-vandal, clear poly-carbonate lens has one of these configurations:
• AD–Direct, asymmetric distribution with a high purity pressed aluminum reflector (99.85%) that is anodized and sealed. Minimum light emission towards the upper hemisphere
• SD – Direct, symmetric distribution with a spun aluminum shield reflector that is anodized and sealed
• SI – Indirect symmetric distribution with an upper pressed aluminum reflector that is anodized and sealed on acrylic diffuser
• Control gear is mounted on an easily removable universal tray
• Luminaire has a supply terminal board and an electrical disconnection system, in case the system is opened
• Standard color option: Grey
Installation• Post top mounting for poles with 60mm dia. endings for
installation
Maintenance• Easy and safe re-lamping without tools
Applications• Suitable for outdoor decorative and city beautification
lighting
Compliance• IP66
• Class I
DUNA ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Starter
Capacitor (Mfd)
PFOrdering
code
DUNAADHPS70W 1 x 70W HPSV - T 240 0.450 EM, 70W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNAADHPS100W 1 x 100W HPSV - T 240 0.650 EM, 100W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNAADHPS150W 1 x 150W HPSV - T 240 0.850 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 COR*
DUNAADCMH150W TU 1 x 150W CMH - T 240 0.850 EM, 150W CMH 240V 50HZ SIP,240V-50Hz 20 0.85 COR*
DUNASDHPS70W 1 x 70W HPSV - T 240 0.450 EM, 70W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNASDHPS100W 1 x 100W HPSV - T 240 0.650 EM, 100W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNASDHPS150W 1 x 150W HPSV - T 240 0.850 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 COR*
DUNASDCMH150W TU 1 x 150W CMH - T 240 0.850 EM, 150W CMH 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNASIHPS70W 1 x 70W HPSV - T 240 0.450 EM, 70W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNASIMH70W 1 x 70W HPSV - T 240 0.450 EM, 70W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 COR*
DUNASIMH100W 1 x 100W MH - T 240 0.650 EM, 100W MH 240V 50HZ SIP,240V-50Hz 20 0.85 COR*
DUNASIMH150W 1 x 150W MH - T 240 0.850 EM, 150W MH 240V 50HZ SIP,240V-50Hz 20 0.85 COR*
*COR - Code on request
and area lightingsports
and area lightingsports
ARIANA V2 93
CONGA - Jr 94
ZION V2 95
BLAZE 96
GLANZ V2 97
STARFLUX 98
STARFLUX - Jr 99
EF 2000 100
EF 2000+ 101
EPACT 102
CMH FLOOD 103
93
ARIANA V2
Description Non Integral flood lighting fixture suitable for 400W / 250W
HPSV & metal halide tubular lamp
Specifications&Features• Housing : Pressure die-cast aluminium powder coated in
black
• Reflector : Spun high purity aluminium that is chemically brightened and anodized
• Cover : Toughened & heat resistant glass
• Control gear box contains OC Ballast , impulser ignitor & metalised PP film capacitor
• Termination by 2 way, 15A porcelain connector
• E40 lamp holder
Installation• Facilitation of graduate disc for proper aiming
• One MS cradle with 3 slots, facilitates mounting
Maintenance• Lamp can be replace by removing cap
• Cable entry through a PG11 cable gland
Application• Dockyards
• Railway marshaling
• Sports lighting
• Area lighting
Compliance• IP65
• Class I
ARIANA V2 ELECTRICAL & ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Weight (kg)
Capacitor (Mfd)
PF
Ordering code
Luminaire + Ballast
Combined code
SF254 V2+GBCV2 1250SV+
250W HPSV T/MH-T (ARC) 240 1.40 BVSM 250 8 33 0.82L2440V2 + L1901 V2 +
FLAR250SVSF254 V2 R+ Reflector L2440V2R +
SF254 V2 GL Glass L2440V2GL
ARIANA V2 ARIANA V2
100
O 10 (x2) O 13
435
610O 237
94
CONGA - Jr
Description Heavy duty integral flood lighting luminaire suitable for
1X70W, 150W HPSV and MH lamps
Specifications&Features• Heavy duty, die-cast aluminum housing equipped with
designed convection fins and black powder coated matt that is excellent for heat dissipation
• Tough and heat resistant front cover, part-masked glass attached to housing with SS toggle clamps and hinges
• Reflector assembly is made of pre-anodized high purity aluminum and is given hammered finish for optimal glare control and light distribution
• Gear compartment consists of ballast, power factor improvement capacitor, electronic ignitor and connector terminal
• Pre-wired up to terminal compartment
Installation• Hingeable front frame with glass during lamp replacement
• One MS cradle with 3 slots, facilitates mounting
Maintenance• Cable entry is through a cable gland provided on the
housing
• Remove the toggle clamps for lamp replacement and accessories maintenance
Applications• Advertisement hoardings
• Façade lighting
• Sports lighting
• Security lighting
• Junction lighting
Compliance• IP65
• Class I
CONGA - Jr. ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering code
Luminaire + Ballast
Combined code
GEMF1X70CAI 1 x 70W MH - DE 240 0.45 EM, 70W MH 240V 50HZ V230002.G 12 0.85 G0527 + L2279 FLCO70MH
GESF1X70CAI 1 x 70W HPSV - T 240 0.45 EM, 70W HPSV 240V 50HZ V230002.G 12 0.85 L0679 + L2279 FLCO70SV
GEMF1X150CAI 1 x 150W MH - DE 240 0.85 EM, 150W MH 240V 50HZ V230002.G 20 0.85 G0540 + L2280 FLCO150MH
GESF1X150CAI 1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ V230002.G 20 0.85 G0539 + L2280 FLCO150SV
CONGA - Jr. CONGA - Jr.
95
ZION V2
Description Integral flood lighting fixture suitable for 400W/250W HPSV
& metal halide tubular lamp
Specifications&Features• Pressure die-cast aluminium powder coated in black color
• Reflector made of high purity pre-anodized aluminium
• Toughened & heat resistant glass
• Has vacuum impregnated OC ballast, impulser ignitor and metalised PP film capacitor
• Termination by 2 way, 10A, PBT connector
• E40 lamp holder
Installation• Insert the SS rod into hinge slit to hold the glass cover
• Cable entry through a PG11 cable gland
• Facilitation of graduate disc for proper aiming
• One MS cradle with 3 slots, facilitates mounting
Maintenance• Lamp and ballast can be replace by releasing SS toggles
Applications• Flood lighting of dock yards
• Railway marshaling yards
• Sports lighting and other outdoor applications
Compliance• IP65
• Class I
ZION V2 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast
Weight (kg)
Capacitor (Mfd)
PFOrdering code
Luminaire + BallastCombined
code
ZF250V2 (HPSV/MH-T (ARC))
250W HPSV-T/MH-T(ARC) 240 1.4A BVSM250 8.7 33 0.85 L2500V2+L2281 FLZF250SV
ZF250V2 KRC (MH KRC)
250W KRC MH-T 240 1.3A BVHM250 7.8 20 0.85 L2501V2+L2284 FLZF250MHK
ZF400 V2 (HPSV/MH-T (ARC))
400W HPSV-T/MH-T(ARC) 240 2.2A BVSM400 9.8 42 0.85 L2502V2+L2282 FLZF400SV
ZF400V2 KRC (MH KRC)
400W KRC MH-T 240 2.0A BVHM400 8.4 25 0.85 L2503V2+L2283 FLZF400MHK
ZION V2 ZION V2
96
BLAZE
Description Non-integral die-cast floodlighting luminaire suitable for 1 X
250W / 400W HPSV and MH tubular lamps
Specifications&Features• Black powder coated, die-cast aluminum housing, which
ensures excellent corrosion resistance
• Tough and heat resistant glass cover that is fixed by innovative lock mechanism
• High purity, pre-anodized aluminum reflector, die-cast aluminum cap (LM6), CRCA connector bracket
• Pre-wired up to terminal block
• EPDM gasket
• Separate aluminum die-cast control gear box has vacuum impregnated polyester resin, open construction ballast, impulser type ignitor and metalised PP film capacitor that governs the electrical circuit
Installation• Cable entry through cable gland of the cap
• Facilitation of graduate disc for proper aiming
• One MS cradle with 3 slots, facilitates mounting
Maintenance• Remove the cap for re-lamping
Applications• Dock yards
• Railway marshaling yards
• Outdoor switch yards
Compliance• IP66
• Class I
BLAZE ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
codeCombined
code
BF254+GBC 1250SV
1 x 250W HPSV - T 240 1.40EM, 250W HPSV 240V
50HZV230002.G 33 0.85
L2051 + L2281 + L1901A
FLBL250SV
BF254+GBC 1400SV
1 x 400W HPSV - T 240 2.20EM, 400W HPSV 240V
50HZV230002.G 42 0.85
L2051 + L2282 + L1900A
FLBL400SV
BF254+GBC 1400MH
1 x 400W MH(KRC) - T 240 1.40EM, 400W KRC MH 240V
50HZV230002.G 33 0.85
L2051 + L2283 + L1913
FLBL400MH
BLAZE BLAZE
384 152
299
100
344
16913
10(x2)
97
GLANZ V2
Description Non-integral die-cast floodlighting luminaire suitable for 2 X
250W / 400W HPSV and MH tubular lamp
Specifications&Features• Black powder coated, die-cast aluminum housing (LM6),
which ensures excellent corrosion resistance
• Tough and heat resistant glass cover that is fixed by innovative lock mechanism
• High purity, pre-anodized aluminum reflector, die-cast aluminum cap (LM6), CRCA connector bracket
• Pre-wired up to terminal block
• EPDM gasket for ingress protection
• Separate aluminum die-cast control gear box has vacuum impregnated polyester resin, open construction ballast, impulsor type ignitor and metalised PP film capacitor that governs the electrical circuit
Installation• Remove the cap for re-lamping
• One MS cradle with 3 slots, facilitates mounting
Maintenance• Cable entry through cable gland of the cap
• Facilitation of graduate disc for proper aiming
Applications• Dock yards
• Railway marshaling yards
• Outdoor switch yards
Compliance• IP66
• Class I
GLANZ V2 ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current (A)
BallastWeight
(kg)Capacitor
(Mfd)PF
Ordering code
Combined code
GF254V2+GBCV2 1400SV(X2) 2 x HPSV 400-T 240 2.2A BVSM400X2 5.6 33 x 2 0.85L2160V2 +
L1900V2 + L2282FLGL400SV
GF254V2+GBCV2 1400KRC(X2) 2 x MH 400W-T(KRC) 240 2.0A BVHM400X2 5.6 42 x 2 0.85L2160V2 +
L1913V2 + L2283FLGL400MHK
GF254V2+GBCV2 1250SV(X2) 2 x HPSV 250W-T 240 1.4A BVSM250X2 5.6 33 x 2 0.85L2160V2 +
L1901V2 + L2281FLGL250SV
GF254V2+GBCV2 1250KRC(X2) 2 x MH 250W-T(KRC) 240 1.3A BVHM400X2 5.6 0.85L2160V2 +
L1912V2 + L2284FLGL250MHK
GLANZ V2 GLANZ V2
98
STARFLUX
Description Aesthetically designed integral flood lighting luminaire
suitable for 1 X 150W / 250W / 400W MH and HPSV lamps
Specifications&Features• Die – cast aluminum housing with electrostatic paint finish
• High purity anodized aluminum reflector
• Available in symmetrical and asymmetrical beam distribution
• Heavy duty steel trunnion provided with aiming degree indicator
• Heat and shock resistance toughened glass
• Enclosed gasket and activated – charcoal filtered optional
• Front access via hinged and removable door
• Wide range of lamps with single end and double end
Installation• One MS cradle with 3 slots, facilitates mounting
Maintenance• Cable entry is through a cable gland provided on the
housing
• Hingeable front frame with glass
• Remove the toggle clamps for lamp replacement and accessories maintenance
Applications• Advertisement hoardings
• Façade lighting
• Sports lighting
Compliance• IP65
• Class I
STARFLUX STARFLUX
STARFLUX ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
TPLF 15S6 MSB AS B 1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF50049
TPLF 15S6 MSB SM B 1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF50052
TPLF 15M6 MSB AS B 1 x 150W CMH/MH - T 240 0.85 EM, 150W CMH/MH 240V 50HZ SIP,240V-50Hz 20 0.85 AF50055
TPLF 15M6 MSB SM B 1 x 150W CMH/MH - T 240 0.85 EM, 150W CMH/MH 240V 50HZ SIP,240V-50Hz 20 0.85 AF50056
TPLF25S6 MSB SMB 1 x 250W HPSV - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF50051
TPLF25S6 MSB ASB 1 x 250W HPSV - T 240 1.40 EM, 250W HPSV 240V 50HZ SIP,240V-50Hz 33 0.85 AF50048
TPLF25KD6 MSB SMB 1 x 250W CMH/MH - T 240 1.40 EM, 250W CMH/MH 240V 50HZ SIP,240V-50Hz 33 0.85 AF50058
TPLF25KD6 MSB ASB 1 x 250W CMH/MH - T 240 1.40 EM, 250W CMH/MH 240V 50HZ SIP,240V-50Hz 33 0.85 AF50057
TPLF40S6 MSB SMB 1 x 400W HPSV - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF50050
TPLF40S6 MSB ASB 1 x 400W HPSV - T 240 2.20 EM, 400W HPSV 240V 50HZ SIP,240V-50Hz 42 0.85 AF50047
TPLF40SD6 MSB SMB 1 x 400W MH - T 240 2.20 EM, 400W CMH/MH 240V 50HZ SIP,240V-50Hz 42 0.85 AF50060
TPLF40SD6 MSB ASB 1 x 400W MH - T 240 2.20 EM, 400W CMH/MH 240V 50HZ SIP,240V-50Hz 42 0.85 AF50059
99
STARFLUX - Jr
STARFLUX - Jr. STARFLUX - Jr.
Description Aesthetically designed integral flood lighting luminaire
suitable for 1 X 70W / 150W MH and CMH lamps
Specifications&Features• Housing made of heavy duty, high pressure die-cast
aluminum with specially designed aesthetic curvature
• Front cover assembly consists of tough and heat resistant glass, silicon-gasket onto a pressure die-cast holding frame, which clicks onto the housing using toggles and hinges
• Reflector assembly is made of high glass stepped category, pre-anodized high purity aluminum ensures glare control and efficient light distribution
• Gear compartment has ballast, power factor improvement capacitor, electronic ignitor and connector terminal
• Pre-wired up to terminal compartment
• Aiming protractor available
Installation• One MS cradle with 3 slots, facilitates mounting
Maintenance• Cable entry is through a cable gland provided on the
housing
• Hingeable front frame with glass
• Remove the toggle clamps for lamp replacement and accessories maintenance
Applications• Advertisement hoardings
• Façade lighting
• Sports lighting
Compliance• IP65
• Class I
STARFLUX - Jr. ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Ballast Ignitor
Capacitor (Mfd)
PFOrdering
code
TPSF 07S6 MSB AS B 1 x 70W HPSV - T 240 0.45 EM, 70W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 AF50071
TPSF 07S6 MSB SM B 1 x 70W HPSV - T 240 0.45 EM, 70W HPSV 240V 50HZ SIP,240V-50Hz 12 0.85 AF50072
TPSF 07KD6 MSB AS B 1 x 70W CMH/MH - T 240 0.45 EM, 70W CMH/MH 240V 50HZ SIP,240V-50Hz 12 0.85 AF50073
TPSF 07KD6 MSB SM B 1 x 70W CMH/MH - T 240 0.45 EM, 70W CMH/MH 240V 50HZ SIP,240V-50Hz 12 0.85 AF50074
TPSF 15S6 MSB AS B 1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF50063
TPSF 15S6 MSB SM B 1 x 150W HPSV - T 240 0.85 EM, 150W HPSV 240V 50HZ SIP,240V-50Hz 20 0.85 AF50064
TPSF 15KD6 MSB AS B 1 x 150W CMH/MH - T 240 0.85 EM, 150W CMH/MH 240V 50HZ SIP,240V-50Hz 20 0.85 AF50067
TPSF 15KD6 MSB SM B 1 x 150W CMH/MH - T 240 0.85 EM, 150W CMH/MH 240V 50HZ SIP,240V-50Hz 20 0.85 AF50068
100
EF 2000
Description High wattage non integral flood light luminaire suitable
for Sports/Stadia lighting as well as other areas such as recreational areas, racecourses, airport aprons, open-air car parks, etc.
Specifications&Features• Housing, rear door and glass lens holder in die-cast
aluminium with RAL 7035 grey polyester powder paint finish.
• Rear door access lamp replacement
• Ingress protection of IP65 with sealed optical assembly
• Front tempered glass lens in a cast aluminium frame, with a silicone gasket between the frame and the housing
• Choice of 6 aluminium reflectors with different photometric distributions, giving a rectangular beam with E40 lamps and an oval beam with double-ended lamps
• Internal aluminium louvre in all reflectors, except ultra-spot for glare control and reduction of sky glow
• Hot restrike systems (HRR), this version allows for instant re-lighting (hot strike).
Installation• Mounting via a hot-dip galvanized steel bracket with aiming
degree indicator.
• For up-lighting installation, aiming angle should not be installed at more than 140º from the vertical
Maintenance• Lamp replacement without disturbing the floodlight´s
aiming position from rear
Applications• Stadium lighting
• recreational areas
• Airport aprons
• Racecourses
• Car parks
Compliance• IP65
• Class II
EF 2000 EF 2000
Housing Optic Electrical and gear box / options
EF2000 for 1000W and 2000W double-ended metal halide lamps Lamp type • 1000W: MN-1000/59/1A-H-KABELSCHUH-36/187/P15 • 2000W: SPL2000/H/654
US – Ultra Spot
C/E – IP 65 housing including the ballast and capacitor for remote use
U/E – Electrical unit on tray
S – Spot
MS – Medium Spot
M – Medium
MW – Medium Wide
W – Wide
EF2000 HRR for 1000W and 2000W double-ended metal halide lamps Lamp type • 1000W: MN-1000/59/1A-H-KABELSCHUH-36/187/P15 • 2000W: MN-2000/59/1A-E-cable lug-36/187/P15
US – Ultra Spot
C/E – IP 65 housing including the ballast and capacitor for remote use
U/E – Electrical unit on tray
S – Spot
MS – Medium Spot
M – Medium
MW – Medium Wide
W – Wide
EF2000 for 1000W metal halide lamp and high pressure sodium lamps with E40 cap Lamp type • Metal halide: SPL1000/T/H/960/E40 • High pressure sodium: LU1000/110/T/40
M – Medium
C/E – IP 65 housing including the ballast and capacitor for remote use
U/E – Electrical unit on tray
W – Wide
Luminaire supplied without lamp
342 650
616
150
22 1515
150
602
548
274
Unit: mm
101
EF 2000+
Description Non Integral flood light suitable for outdoor installations
with 1KW / 2KW, double ended MH lamps
Specifications&Features• Stream line and aesthetic shape, patented industry design
• High pressure die- cast fixture body, advanced inner and outside powder coating to ensure best anti-corrosion quality
• Remote high pressure die – casting aluminum gear box with thermal protected ballast
• Aluminum anodized reflector with high purity of 99.85% provides best photometric results as follows:
Round shape reflector: Ultraspot, spot, extra spot, spot medium, medium, medium wide, wide, extra wide Rectangular shape reflector: Medium and wide
• Stainless steel mesh to ensure the safety
• Anti-aging silicon rubber gasket, equipped with advanced ePTE membrane filter and charcoal filter to ensure the best insulation effect and increase product reliability
• Optional internal glare, spill control
• Graduated scale for correct aiming
• Optional hot re-sitrke, outside visor on request 4mm micro- crystal glass, strongly against thermal shock and anti UV
Installation• Installation by steel bracket that is painted like body
and provided with 3 mounting slots
Maintenance• Easy maintenance
Applications• Stadium lighting
• Special façade and area lighting applications
Compliance• IP65
• Class I
EF 2000+ EF 2000+354
308
362
616
675
376
200
400
EF2000 AF
EF 2000+ ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Ballast Ignitor PF
Ordering code
EE01S1MGR 1 x 1000W HPSV - E40 240 1000W HPSV 240V BAL MSI/1000/P 0.85 AF50475
EE01S1WGR 1 x 1000W HPSV - E40 240 1000W HPSV 240V BAL MSI/1000/P 0.85 AF50476
EE01M1MGR 1 x 1000W MH - E40 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50477
EE01M1WGR 1 x 1000W MH - E40 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50478
EE01M2SGR 1 x 1000W MH - DE 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50479
EE01M2MGR 1 x 1000W MH - DE 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50480
EE01M2WGR 1 x 1000W MH - DE 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50481
EE02M3SGRUP 1 x 2000W MH - DE 415 2000W MH 415V BAL MSI/2000/A 0.85 AF50482
EE02M3MGRUP 1 x 2000W MH - DE 415 2000W MH 415V BAL MSI/2000/A 0.85 AF50483
EE02M3WGRUP 1 x 2000W MH - DE 415 2000W MH 415V BAL MSI/2000/A 0.85 AF50484
EE02M3SGRDW 1 x 2000W MH - DE 415 2000W MH 415V BAL MSI/2000/A 0.85 AF50485
EE02M3MGRDW 1 x 2000W MH - DE 415 2000W MH 415V BAL MSI/2000/A 0.85 AF50486
EE02M3WGRDW 1 x 2000W MH - DE 415 2000W MH 415V BAL MSI/2000/A 0.85 AF50487
BT016E 1000W HPSV 240V CGBOX 240 NA 0.85 AF50468
BT017E 1000W HPSV 230V CGBOX 230 NA 0.85 AF50521
BT02CH 2000W MH 415V CGBOX 415 NA 0.85 AF50469
102
EPACT
EPACT ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Ballast Ignitor PF
Ordering code
EF1K01SASGR 1 x 1000W HPSV - E40 240 1000W HPSV 240V BAL MSI/1000/P 0.85 AF50546
EF1K01SSMGR 1 x 1000W HPSV - E40 240 1000W HPSV 240V BAL MSI/1000/P 0.85 AF50547
EF1K01MASGR 1 x 1000W MH - E40 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50548
EF1K01MSMGR 1 x 1000W MH - E40 240 1000W MH 240V BAL MSI/1000/P 0.85 AF50549
EBT016E 1000W HPSV 240V CGBOX 240 NA 0.85 AF50543
EBT017E 1000W HPSV 230V CGBOX 230 NA 0.85 AF50544
Description Non Integral die cast flood lighting fixture suitable for
1000W HPSV and metal halide lamps
Specifications&Features• Pressure die –cast aluminum housing
• Anodized and polished aluminum reflector with 99.85% purity
• Heat resistant tempered glass
• Thermal cut off ballast to ensure system safety during end of lamp life
• Electrostatic spray coating surface
• Available in Symmetric and asymmetric light distribution
• Suitable for wet location with ePTEE membrane filter
Installation• Degree indicator for aiming
• MS cradle facilitates mounting
Maintenance• Easy lamp maintenance
Applications• High mast application
• Highway & overhead road
• Industry parks
• Sports
Compliance• IP65
• Class I
EPACT EPACT
103
CMH FLOOD
Description Non Integral flood light suitable for outdoor installations
with 1KW / 2KW, double ended MH lamps
Specifications&Features• CMH 35W & 70W G12 lamp
• Toolless entry for ease of maintenance
• Die-cast aluminum housing with electrostatic painting
• Anodized aluminum reflector, with narrow & medium beam options
• Automatic thermal-cut off control gears
Installation• Using fixing on ground
Maintenance• Tool-free and easy maintenance
Applications• Highlighting sculptures
• Trees and various areas in the park
• Signages and buildings
• Landscape, detail lighting and mini billboards
Compliance• IP65
• IEC60598-2-5, CISPA15, IEC61000-3-2 etc
CMH FLOOD CMH FLOOD
CMH FLOOD ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Wattage Voltage/Frequency Ballast Color
AF50914 CF35C8MSBNBB 35 220V/50HZ CMH ballast Black
AF50915 CF35C8MSBMBB 35 220V/50HZ CMH ballast Black
AF50916 CF70C8MSBNBB 70 220V/50HZ CMH ballast Black
AF50917 CF70C8MSBMBB 70 220V/50HZ CMH ballast Black
AF51015 CF35C7MSBNBB 35 230V/50HZ CMH ballast Black
AF51016 CF35C7MSBMBB 35 230V/50HZ CMH ballast Black
AF51017 CF70C7MSBNBB 70 230V/50HZ CMH ballast Black
AF51018 CF70C7MSBMBB 70 230V/50HZ CMH ballast Black
AF51019 CF35C6MSBNBB 35 240V/50HZ CMH ballast Black
AF51019 CF35C6MSBMBB 35 240V/50HZ CMH ballast Black
AF51021 CF70C6MSBNBB 70 240V/50HZ CMH ballast Black
AF51022 CF70C6MSBMBB 70 240V/50HZ CMH ballast Black
AF51023 CF35C3MSBNBB 35 220V/60HZ CMH ballast Black
AF51024 CF35C3MSBMBB 35 220V/60HZ CMH ballast Black
AF51025 CF70C3MSBNBB 70 220V/60HZ CMH ballast Black
AF51026 CF70C3MSBMBB 70 220V/60HZ CMH ballast Black
AF51027 CF35C2MSBNBB 35 230V/60HZ CMH ballast Black
AF51028 CF35C2MSBMBB 35 230V/60HZ CMH ballast Black
AF51029 CF70C2MSBNBB 70 230V/60HZ CMH ballast Black
AF51030 CF70C2MSBMBB 70 230V/60HZ CMH ballast Black
152
198
5-Ø7
135
Unit: mm265
300
140
lightingLED
lightingLED
MAPLE 107
MORSEL LED 108
TAD LED 109
FERN RECESS 110
FERN SURFACE 111
FERN PENDANT 112
SWIVEL 113
TETRA COVE 114
PALM MAX 115
PALM MID 116
R250 117
EVOLVE COBRA HEAD ROADWAY 118
EVOLVE AREA LIGHT 119
LED FLOOD F150 120
DUNA LED 121
LED IBERIA 122
LED TUNNEL T150 123
LED LAMPS 124
TETRATM MINIMAX GEN3 125
TETRATM MAX – GEN 3 126
TETRATM POWER MAX GEN 3 127
TETRATM CONTOUR 128
TETRATM POWER STRIP & DS 130
107
MAPLE
Description Maple is new age professional LED lighting solution
forrecessed commercial application. A recessed depression isprovided in the luminaire surface to achieve a special Impression of depth
Specifications&Features• PDC aluminium housing body with extended heat sink for
better thermal dissipation
• Injection moulded diffuser is made of special Polycarbonate material delivers offers effective light output without any dark or bright patch
• Rated life of L70 @50000hrs ensures uninteruppted long service life
• Excellent color rendering capabilities reveals true color of your surrounding space
• Superior lumen and color maintenance
• In built electrical protections like over voltage , shor t circuit, over loading,miswiring for additional safety precautions
• Colors available cool white and neutral white
Installation• Mounting suitable for Armstrong ceiling with cutout
dimension of 575mmX575mm
• Suspension mounting through 4 mounting brackets
Maintenance• Maintenanance through releasing four M4 screws from
backside of luminaire
Applications• Departmental stores,hotels , restaurants,museum display
shopping malls airport terminals
Compliance• IP20
• Class I
MAPLE MAPLE
MAPLE ELECTRICAL AND ORDERING INFORMATION
Model/Ordering code Lamp TypeNominal
voltage (V)Mains
current (A)Weight (kg) PF
GCR055.56MO Cool White LED 55W 2400.3 4.5 >0.9
GCR055.40MO Neutral White LED 55W 240
GCR036.56MO Cool White LED 36W 2400.19 4.5 >0.9
GCR036.40MO Neutral White LED 36W 240
MAPLE+ ELECTRICAL AND ORDERING INFORMATION
Model/Ordering code Lamp TypeNominal
voltage (V)Mains
current (A)Weight (kg) PF
GCR042.56MO Cool White LED 42W 2400.22 4.5 >0.9
GCR042.40MO Neutral White LED 42W 240
595
595
88 80
595
595
88 80
108
MORSEL LED
Description Recess mounted, rolling type, downlighting luminaire,
suitable for halogen and LED lamp
Specifications&Features• Rim fabricated from die-cast aluminum in white eindhoven
powder coat
• Pre-wired up to mains connector
• Swiveling unit has an aluminum die-cast eye ball that changes position of lamp
• Lamp position is retained by circular wire spring
Installation• Retaining clips facilitate mounting on false ceiling
Maintenance• Easy removal of circular wire for re-lamping from bottom
Applications • Office area
• Conference rooms
• High-end fashion shops
• Boutiques
• Small restaurants
Compliance• IP20
• Class I
MORSEL LED ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal voltage
(V)
Mains current
(A)Ballast Starter
Capacitor (Mfd)
PFOrdering
codeCombined
code
GE MR C 4/6W LED DN 1 x 4W/6W LED GU10 240 0.22 NA NA NA 0.99 P0855 -
MORSEL LED MORSEL LED
109
TAD LED
Description
Indoor decorative recessed mounting LED downlighting
luminaire suitable for 7W LED lamp
Specifications&Features• Housing made from aluminium sheet white Eindhoven
powder coated.
• Prewired upto mains connector.
• Spring loaded central contact lamp holder and mains connector
• Optical system:Electrochemically brightened aluminium reflector with a finishing combination of glass at the bottom, intermediate diamond and glass at the top for higher light output.reflector is held in position by three stainless steel clips
• Relamping:can be carried out from below.
• Mounting:retaining clips facilitate mounting in false ceiling.
Installation• Retaining clips facilitate mounting on false ceiling
TAD LED ELECTRICAL & ORDERING INFORMATION
Model Lamp Type Nominal voltage (V) Ballast Mains current (A) Weight (kg) PFOrdering code
GE R63 7W DN R LED R63, E27 base 220V-240V NA 0.040A 3.6 >0.9 P0697
TAD LED TAD LED
Maintenance• Lamp can be replaced from bottom
Applications• Suitable for lobbies
• Hotels
• Shopping complexes
• Commercial establishments.
Compliance• IP20
• Class I
CUTOUT
O 185.0
193.
0
O 165
110
FERN RECESS
Description
FERN is a new professional LED recessed Down-lighter. It is designed to create a welcoming ambience in modern indoor space. its design attributes make it futuristic yet an elegant green product.
Specifications&Features• Housing : Powder coated Pressure diecast aluminium
housing with extended heat sink
• Cover : Diffuser made of Imported Lexan plastic material with Flushed(Standard) and Protruded option (LG7 Standard)
• Rated Life: L70 @ 50000Hrs
• Inbuilt Electrical protections like Over/Under voltage, short circuit, Over load, Open Circuit, Miswiring.
• Driver : Constant Current driver
• Termination : Terminal block with 3way and 2Way connectors.
• Filler (Optional accessory) : Can replace existing downlighter having cutout dimension up to 180mm with a Filler.
• Hingeable gear tray (tilt from 0’ to 180’) for Driver placement, for easy installation of the fixture to the ceiling
Installation• Installation needs cut out dimention of 156mm dia
Maintenance• Maintenance: Driver maintenance from top.
Applications• Retail stores
• Office space
• Hotels
• Restaurants
• Museum display
• Shopping malls
• Airport terminals,etc.
Compliance• IP20
• Class I
FERN RECESS ELECTRICAL AND ORDERING INFORMATION
Model/Ordering code Lamp TypeNominal
voltage (V)Mains
current (A)Driver Weight (kg) PF
GDRO18.56L1 Cool White LED, 18W 240 0.09A 24W Constant current, 575mA 0.85 0.9GDR018.56S1GDR012.56L1 Cool White LED, 12W 240 0.06A 12W Constant current, 350mA 0.85 0.9GDR012.56S1GDR006.56L0 Cool White LED, 6W 240 0.06A 10W Constant current, 350mA 0.8 0.48GDR006.56S0
FERN RECESS FERN RECESS
STD. LG7
CUTOUT DIMENSION DIA. 156 mm
Ø 170
108
118
Ø 170
Also available in 3000K and 4000K CCTs
111
FERN SURFACE
Description
Fern surface is designed to create a welcoming ambience in modern indoor space. its design attributes make it futur-istic yet an elegant green product.
Specifications&Features• Housing : Powder coated Pressure diecast aluminium
housing with extended heat sink
• Cover : Diffuser made of Imported Lexan plastic material with Flushed(Standard) and Protruded option (LG7 Standard)
• Rated Life: L70 @ 50000Hrs
• Inbuilt Electrical protections like Over/Under voltage, short circuit, Over load, Open Circuit, Miswiring.
• Driver : Constant Current driver
• Termination : Terminal block with 3way and 2Way connectors.
• Hingeable gear tray (tilt from 0’ to 180’) for Driver placement, for easy installation of the fixture to the ceiling
Installation• Mounting : Surface mounting
Maintenance• Maintenance: Driver maintenance from top.
Applications• Retail stores
• Office space
• Hotels
• Restaurants
• Museum display
• Shopping malls
• Airport terminals,etc.
Compliance• IP20
• Class I
FERN SURFACE FERN SURFACE
STD. LG7
185
4.5
135
126
185
4.5
Ø 170 Ø 170
FERN SURFACE ELECTRICAL AND ORDERING INFORMATION
Model/Ordering code Lamp TypeNominal
voltage (V)Mains
current (A)Driver Weight (kg) PF
GDSO18.56L1 Cool White LED, 18W 240 0.09A 24W Constant current, 575mA 0.85 0.9GDS018.56S1GDS012.56L1 Cool White LED, 12W 240 0.06A 12W Constant current, 350mA 0.85 0.9GDS012.56S1GDS006.56L0 Cool White LED, 6W 240 0.06A 10W Constant current, 350mA 0.8 0.48GDS006.56S0
Also available in 3000K and 4000K CCTs
112
FERN PENDANT
Description
Fern pandant is designed to create a welcoming ambience in modern indoor space. its design attributes make it futur-istic yet an elegant green product.
Specifications&Features• Housing : Powder coated Pressure diecast aluminium
housing with extended heat sink
• Cover : Diffuser made of Imported Lexan plastic material with Flushed(Standard) and Protruded option (LG7 Standard)
• Rated Life: L70 @ 50000Hrs
• Inbuilt Electrical protections like Over/Under voltage, short circuit, Over load, Open Circuit, Miswiring.
• Driver : Constant Current driver
• Termination : Terminal block with 3way and 2Way connectors.
Installation• Mounting using suspension wire system
Maintenance• Maintenance: Driver maintenance from top.
Applications• Retail stores
• Office space
• Hotels
• Restaurants
• Museum display
• Shopping malls
• Airport terminals,etc.
Compliance• IP20
• Class I
FERN PENDANT FERN PENDANT
STD. LG7
49
185
4.5
49
185
4.5
Ø 170Ø 170
72 72
FERN PENDANT ELECTRICAL AND ORDERING INFORMATION
Model/Ordering code Lamp TypeNominal
voltage (V)Mains
current (A)Driver Weight (kg) PF
GDPO18.56L1 Cool White LED, 18W 240 0.09A 24W Constant current, 575mA 0.85 0.9GDP018.56S1GDP012.56L1 Cool White LED, 12W 240 0.06A 12W Constant current, 350mA 0.85 0.9GDP012.56S1GDP006.56L0 Cool White LED, 6W 240 0.06A 10W Constant current, 350mA 0.8 0.48GDP006.56S0
Also available in 3000K and 4000K CCTs
113
SWIVEL
Description
New age professional swivel down lighter is a premium green lighting solution packed with features that make the luminaries easy to place and direct the beam as required.
Specifications&Features• Elegantly designed pressure die cast aluminium housing
body with extended heat sink for better thermal dissipation
• Independent light compartment can be swiveled from 0 to 80 degree with respect to the ceiling surface as required.
• Rated life of L70 @ 50000 hrs
• Excellent color rendering
• In built electrical protections like over voltage,short circuit,over load,miswiring,for additional safety precautions.
• Colors available are warm white and neutral white
Installation• Installation of standard recessed down lighter needs cut
out dimension of 185mm-190mm dia.
• Exclusively designed to install in both standard 2X2 Armstrong ceiling and Gypsum/POP ceiling
Maintenance
• Easy maintenance
Applications• Office
• Hotels
• Museums
• Departmental stores
• Shops
• Airport terminals and Showrooms
Compliance• IP20
• Class I
SWIVEL ELECTRICAL AND ORDERING INFORMATION
Model/Ordering code Lamp TypeNominal
voltage (V)Mains
current (A)Weight (kg) PF
GDRO24.56WO Cool White – Wallwasher 240 0.12A 0.85 >0.9
GDR024.40WO Neutral White –Wallwasher 240 0.12A 0.85 >0.9
GDR024.30WO Warm White – Wallwasher 240 0.12A 0.85 >0.9
SWIVEL SWIVEL
134
O 210.0
Cutout dia. 180-190
114
TETRA COVE
Description Integrated energy efficient LED cove lighting with modular
system design
Specifications&Features• System rating is 50,000 hours @ L70 (70% lumen
maintenance)
• Superior brightness and uniformity
• Dimmable when connected to an electronic low-voltage (ELV) reverse phase control dimmer
• CCT offering: 2700K, 3000K, 4100K
• Advanced thermal management design optimizes efficiency, performance and life
• Integrated technology eliminates the need for remote mounting power supplies
• Modular system design for added flexibility
• Cut-to-fit mounting tracks available in 0º, 15º or 30º for different application needs
• 120V/240V voltage AC power input for quick installation
Application• Casinos
• Hotels
• Restaurants
• Retail stores
Compliance• CE
• RoHS
TETRA COVE
TETRA COVE ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Product Description Unit TypeOrder
Multiple
73098 LC12/727/120V Cove Fixture, 1 foot, 2700K, 120V EA 10
73099 LC12/730/120V Cove Fixture, 1 foot, 3000K, 120V EA 10
73100 LC12/727/240V Cove Fixture, 1 foot, 2700K, 240V EA 10
73101 LC12/730/240V Cove Fixture, 1 foot, 3000K, 240V EA 10
73826 LC12/741/240V Cove Fixture, 1 foot, 4100K, 240V EA 10
73105 LC-MT48/0 *Mounting Tracks (0 degree) EA 25
73106 LC-MT48/15 *Mounting Tracks (15 degree) EA 25
73107 LC-MT48/30 *Mounting Tracks (30 degree) EA 25
73108 LC-LC/40 AC Leader Cable, 40 Feet EA 10
73109 LC-JC/3 AC Jumper Cable, 3 feet EA 10
75476 LC-LC/10 AC Leader Cable, 10 Feet EA 10
73617 LC-LC/12m/CE AC Leader Cable, 12 meters, CE approved EA 10
73616 LC-JC/1m/CE AC Jumper Cable, 1 meter, CE approved EA 10
73618 LC-LC/3m/CE AC Leader Cable, 3 meters, CE approved EA 10
115
PALM MAX
Description
PALM MAX has the most creative design in term of aesthetics. It is designed for the most effective thermal management, with its optimum light quality and light distribution for roadway lighting.
Specifications&Features• Presuure die cast aluminium housing body with optimal
heat sink for better thermal dissipation.
• Injection moulded diffuser is made of special polycarbonate material with high transmission index , delivering superior light output.
• Rated life of L70 @ 50000hrs
• Color temperature of 5600K for bright white light
• Secondary lens used for asymmetric wide distribution ,
• Micro vent rated IP66, avoids entry of moisture and industrial micro particles inside housing.
• Over voltage, short circuit, over load, miswiring feature for additional safety.
• Silicone gasket ensures both optical and electrical compartments are IP66 protected.
Installation• Compatible for pole mounting with OD of 50mm to 60mm
• Flexibility to mount either in horizontal or in vertical position
• Fixture can be mounted with the help of 2 No M8 bolts made of SS
Maintenance• For ease of access to gear compartment , one need
to handle only a single yet sturdy M6 captive screw arrangement
Applications• Street
• roadways
• Highways and overhead roads
• Industrial parks
• Commercial plaza
• Parking lots
Compliance• IP66
• Class I
PALM MAX ELECTRICAL & ORDERING INFORMATION
Model/Ordering code Nominal voltage (V) Mains current (A) Weight (kg) PF
GSP090.56PO 90W +_ 5% 0.43 7.5 >0.95
GSP110.56PO 110W +_ 5% 0.53 7.5 >0.95
GSP130.56PO 130W +_ 5% 0.62 7.5 >0.95
GSP150.56PO 150W +_ 5% 0.72 7.5 >0.95
GSP180.56PO 180W +_ 5% - 7.5 >0.95
PALM MAX PALM MAX
Suitable for Dia 50~60 Pole
890
183
272
116
PALM MID
Description
PALM MID offers a highly effective and efficient lighting solution to street light application. PALM is designed for the most effective thermal management.
Specifications&Features• Presuure die cast aluminium housing body with optimal
heat sink for better thermal dissipation.
• Injection moulded diffuser is made of special polycarbonate material with high transmission index , delivering superior light output.
• Rated life of L70 @ 50000hrs
• Color temperature of 5600K for bright white light
• Secondary lens used for asymmetric wide distribution ,
• Micro vent rated IP66, avoids entry of moisture and industrial micro particles inside housing.
• Over voltage, short circuit, over load, miswiring feature for additional safety.
• Silicone gasket ensures both optical and electrical compartments are IP66 protected.
Installation• Compatible for pole mounting with OD of 50mm to 60mm
• Flexibility to mount either in horizontal or in vertical position
• Fixture can be mounted with the help of 2 No M8 bolts made of SS
Maintenance• For ease of access to gear compartment, one need
to handle only a single yet sturdy M6 captive screw arrangement
Applications• City Streets
• Industrial parks
• Commercial plaza
• Parking lots
Compliance• IP66
• Class I
PALM MID PALM MID
PALM MID ELECTRICAL & ORDERING INFORMATION
Model/Ordering code Nominal voltage (V) Mains current (A) Weight (kg) PF
GSP043.56.PO 43 W +_ 5% 0.210 3.6 >0.9
GSP065.56.PO 65 W +_ 5% 0.275 3.8 >0.9
182
689
170
117
R250
Description• R250 is a LED roadway luminaire. with its modular
construction the luminaire is available in Wattage range from 39W to 237W and with lumen package from 2950 lumen to 17800 lumen
Specifications&Features• Die cast aluminium housing with polystrene powder coat
• System rating is 50,000 hours @ L80
• Utilizes High Brightness LEDs, both 6000K & 4300K are available
• 200-240V input voltage, PF>0.9, Class I
• IP 65 rated
• Meets ANSI 2G vibration standards
• Ideal mounting height 4-12m
• 0-10V dimming interface available
CE listed suitable for wet location
Installation• pole entry dia of 42mm to 60mm
Maintenance
• Tool less maintenance
Applications• Highways and parkways
• Commercial areas and industrial complex
• Residential areas and pedestrian walkway lighting
R250
ERMS 2 S2 60 L09 A SG AD/ / / / / / / /
PRODUCT ID
E=LED ProductR=RoadwayM=ModuleS=Systems
VOLTAGE
2 = 200V-240V (50-60Hz)
DISTRIBUTION
S2=Asymmetric MediumS3=Asymmetric Wide
CCT
60 = 6000K43 = 4300K
LUMEN OUTPUT*
L01= 2950lmL02= 4450lmL03= 5900lmL04= 7400lmL05= 8900lmL06= 10350lmL07= 11850lmL08= 13350lmL09= 14800lmL10= 16300lmL11= 17800lm
FIXTURE LENS TYPE
A = Acrylic
FINISHING COLOR
SG = Silver Grey(More color needed please contact manufacturer)
OPTION
Anti-Drop Chain
R250 ELECTRICAL AND ORDERING INFORMATION
118
EVOLVE COBRA HEAD ROADWAy
Description Highly reliable energy efficient LED solution for roadway
lighting application
Specifications&Features• Die-cast aluminum housing and corrosion resistant
polyester powder painted
• Optimized optical design based on international roadway lighting regulations
• Utilizes High power LED’s, 6000K with CRI>70
• Available in asymmetric short and asymmetric wide medium optical distribution
• System rating is 50,000 hr @ L80 (80% lumen maintenance)
• Power factor greater than 0.9
• Meets ANSI 2G vibration standards
Applications• Highways, Parkways, Commercial areas, Residential areas,
Pedestrian walkway lighting
Compliance• IP65
• Class I
• CJJ 45-2006
• CIE--BS EN 13201-2:2003
EVOLVE COBRA HEAD ROADWAy
LED ROADWAY R150 ELECTRICAL AND ORDERING INFORMATION
SKU SKU descriptionPhotometry Distribution
Lumens (lm) Wattage (W) Fixture color
63245 ERMC2A1F60A1GRAYE Asymmetric Wide 6000 95 Grey
63246 ERMC2A2F60A1GRAYE Asymmetric Wide 8700 142 Grey
63247 ERMC2A3F60A1GRAYE Asymmetric Wide 9600 157 Grey
63248 ERMC2A4F60A1GRAYE Asymmetric Short 5100 80 Grey
63249 ERMC2A5F60A1GRAYE Asymmetric Short 7000 115 Grey
63250 ERMC2A6F60A1GRAYE Asymmetric Short 7800 127 Grey
63251 ERMC2A1F60A1BLCKE Asymmetric Wide 6000 95 Black
63252 ERMC2A2F60A1BLCKE Asymmetric Wide 8700 142 Black
63253 ERMC2A3F60A1BLCKE Asymmetric Wide 9600 157 Black
63254 ERMC2A4F60A1BLCKE Asymmetric Short 5100 80 Black
63255 ERMC2A5F60A1BLCKE Asymmetric Short 7000 115 Black
63256 ERMC2A6F60A1BLCKE Asymmetric Short 7800 127 Black
63257 ERMC2A1F60A1WHITE Asymmetric Wide 6000 95 White
63258 ERMC2A2F60A1WHITE Asymmetric Wide 8700 142 White
63259 ERMC2A3F60A1WHITE Asymmetric Wide 9600 157 White
63260 ERMC2A4F60A1WHITE Asymmetric Short 5100 80 White
63261 ERMC2A5F60A1WHITE Asymmetric Short 7000 115 White
63262 ERMC2A6F60A1WHITE Asymmetric Short 7800 127 White
119
EVOLVE AREA LIGHT
Description Highly reliable energy efficient LED solution for area lighting
application
Specifications&Features• Die-cast aluminum housing
• Slim architectural design incorporates a heat sink directly into the housing ensuring maximum heat dissipation which ensures the long LED life
• Utilizes high brightness LEDs, 70CRI at 6000K
• System rating is 50,000K hours @ L85 (85% lumen maintenance)
• Meets ANSI 2G vibration standards
• 120V-277V voltage available with electronic driver, PF>0.9, Class 1
• Three mounting options are available for easy installation
Applications• Site lighting
• Parking lots
• Walkways
• Driveways
• Malls and shopping centers
• Commercial and industrial complexes
• Residential areas
• Parkway lighting
Compliance• IP65
• UL
EVOLVE AREA LIGHT
LED AREA LIGHT ELECTRICAL AND ORDERING INFORMATION
SKU Code SKU DescriptionLight Distribution Type
(III, IV, V)System Wattage
(W)Fixture Color
188403 EAMTXS5N60A1BBLCK005 Type V, Symmetric Square 210 Black
188744 EAMTXS5N60A1CBLCK005 Type V, Symmetric Square 210 Black
188405 EAMTXW3F60A1BBLCK005 Type III, Asymmetric Wide 132 Black
188239 EAMTXW3F60A1CBLCK005 Type III, Asymmetric Wide 132 Black
188404 EAMTXF4F60A1BBLCK005 Type IV, Asymmetric Forward 94 Black
188742 EAMTXF4F60A1CBLCK005 Type IV, Asymmetric Forward 94 Black
120
LED FLOOD F150
Description Highly reliable energy efficient LED solution for flood
lighting application
Specifications&Features• Die Cast aluminum housing and corrosion resistant
polyester powder coat
• Optimized optical design including 5 different light distribution (Narrow Spot / Medium Flood / Wide Flood / Poster / Bulletin)
• 6000K, 4300K and 3000K are available
• System rating is 50K hours @ L70
• 100V-127V, 200-277V voltage available with electronic driver, PF>0.9, Class 1
• Meets ANSI 2G vibration standards
• Total system power consumption is 90W
• Color options : Black, Silver Grey, White, Dark Bronze
Applications• Façade lighting
• Spot / accent lighting
• Commercial site
• Sign lighting
Compliance• IP65
• UL
• CE
LED FLOOD F150
LED FLOOD LIGHT ELECTRICAL AND ORDERING INFORMATION
SKU SKU description Optical Code CCT (K) Lumens
(lm)Fixture color
61694 ELMF1NSF60G0TSGE Narrow Spot 6000K 6000lm Silver Grey
61697 ELMF1NSF43G0TSGE Narrow Spot 4300K 5600lm Silver Grey
61700 ELMF1NSF30G0TSGE Narrow Spot 3000K 4520lm Silver Grey
61703 ELMF1MFF60G0TSGE Medium Flood 6000K 6000lm Silver Grey
61706 ELMF1MFF43G0TSGE Medium Flood 4300K 5600lm Silver Grey
61709 ELMF1MFF30G0TSGE Medium Flood 3000K 4520lm Silver Grey
61712 ELMF1WFF60G0TSGE Wide Flood 6000K 6000lm Silver Grey
61715 ELMF1WFF43G0TSGE Wide Flood 4300K 5600lm Silver Grey
61718 ELMF1WFF30G0TSGE Wide Flood 3000K 4520lm Silver Grey
61721 ELMF1BUF60G0TSGE Bulletin 6000K 6000lm Silver Grey
61724 ELMF1BUF43G0TSGE Bulletin 4300K 5600lm Silver Grey
61727 ELMF1BUF30G0TSGE Bulletin 3000K 4520lm Silver Grey
61730 ELMF1POF60G0TSGE Poster 6000K 6000lm Silver Grey
61733 ELMF1POF43G0TSGE Poster 4300K 5600lm Silver Grey
61736 ELMF1POF30G0TSGE Poster 3000K 4520lm Silver Grey
121
DUNA LED
DUNA LED DUNA LED
Description Duna LED is a decorative luminaire of truncated cone
design using LED technology up to 88W with symmetrical and asymmetrical distribution.
Specifications&Features• Die-cast aluminum housing
• Utilizes high brightness LEDs, both 5600K & 4100K are available
• CE certificate, suitable for wet location
• Meets ANSI 2G vibration standards
• System rating is 50,000 hours @ L85
• Designed to operate -40~400C
Installation• Post-top mounting for 60mm diameter poles
Maintenance
• Electrical disconection system once the fixture is opened
• 85% lumen maintenance at 50,000 hours
Applications• Parks
• Gardens squaze lighting
• Residential
• Pedestrian walking lighting
Compliance• IP66
• CE
• Class I
DUNA LED ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description CCT Wattage (W) Color Weight (kg)
339003 DUNA LED ASy3/41 4100K 88 GRIS OXYDON 14.1
339004 DUNA LED ASy3/57 5600K 88 GRIS OXYDON 14.1
339005 DUNA LED ASy4/41 4100K 63 GRIS OXYDON 14.1
339006 DUNA LED ASy4/57 5600K 63 GRIS OXYDON 14.1
339001 DUNA LED SyM5/41 4100K 88 GRIS OXYDON 14.1
339002 DUNA LED SyM5/57 5600K 88 GRIS OXYDON 14.1
21
Duna LED is a decorative luminaire of truncated cone design using LED technology up to 88W with
symmetrical and asymmetrical distribution.
Specification Features • Die-cast aluminum housing • Utilizes high brightness LEDs, both 5600K & 4100K are available • CE certificate, suitable for wet location • IP65 rated for optical assembly • Meets ANSI 2G vibration standards • Ideal mounting height 4~8m • System rating is 50,000 hours @ L85 • Designed to operate -40~40℃
Ordering Description
Fixture Dimensions
Photometric Data
SKU SKU Description CCT Lumen (lm)
Photometry Distribution
Wattage (W) Color Weight
(kg) Package weight(kg) Certificate
339003 DUNA LED ASY3/41 4100K 4000 Asymmetric Wide 88 GRIS OXYDON 14.1 17.9 CE 339004 DUNA LED ASY3/57 5600K 4400 Asymmetric Wide 88 GRIS OXYDON 14.1 17.9 CE 339005 DUNA LED ASY4/41 4100K 2000 Asymmetric Forward 63 GRIS OXYDON 14.1 17.9 CE 339006 DUNA LED ASY4/57 5600K 2200 Asymmetric Forward 63 GRIS OXYDON 14.1 17.9 CE 339001 DUNA LED SYM5/41 4100K 4000 Symmetric 88 GRIS OXYDON 14.1 17.9 CE 339002 DUNA LED SYM5/57 5600K 4400 Symmetric 88 GRIS OXYDON 14.1 17.9 CE
unit: mm
16
10
52
1
2013
5 2
1
10
52
16 13
10
52
1
52
1
1052
1
a
H
H: Mounting Heighta: Tilt AngleGreen: Distribution Area (shown as below)
Asymmetric Wide 4100K
Asymmetric Wide 5600K
Asymmetric Forward 4100K
Asymmetric Forward 5600K
Symmetric 4100K
Symmetric 5600K
(For H=6m α=0°grid dimension=6m)
Post top mounting O.D. 60mm held in place with three hex head set screws
122
LED IBERIA
LED IBERIA LED IBERIA
Description Iberia LED is a versatile luminarie suitable for architectural
and urban environments. It is available with symmetrical and asymmetrical distribution.
Specifications&Features• Die-cast aluminum housing.
• Utilizes High Brightness LEDs, both 5600K & 4100K are available
• CE listed, suitable for wet location
• Meets ANSI 2G vibration standards
Installation• Post-top mounting for 60mm diameter poles
Maintenance
• 85% lumen maintenance at 50,000 hours
Applications• Parks
• Gardens
• Commercial centers
• Architectural lighting
• Residential areas
• Pedestrian walkway lighting
Compliance• IP66
• CE
• Class I
LED IBERIA ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description CCT Wattage (W)
STANDARD IBERIA FIXTURE
338001 IBERIA/E/LED SyM5/41 GRIS 150 SABLE 4100K 90
338002 IBERIA/E/LED SyM5/57 GRIS 150 SABLE 5600K 90
338003 IBERIA/E/LED ASy3/41 GRIS 150 SABLE 4100K 90
338004 IBERIA/E/LED ASy3/57 GRIS 150 SABLE 5600K 90
338005 IBERIA/E/LED ASy4/41 GRIS 150 SABLE 4100K 63
338006 IBERIA/E/LED ASy4/57 GRIS 150 SABLE 5600K 63
18
With a wide range of different options, Iberia LED is
a versatile luminarie suitable for architectural and
urban environments.
Iberia LED is a decorative LED luminaire. In wattages
up to 90W, it is available with symmetrical and
asymmetrical distribution. The fexibility of the
different options that are available means it is
suitable for all applications in amenity lighting,
pedestrian and squares.
Specification Features • Die-cast aluminum housing. Decorative luminaire of truncated
cone design using LED technology with symmetric and asymmetric light distribution
• Utilizes High Brightness LEDs, both 5600K & 4100K are available
• System rating is 50,000 hours @ L85 (85% lumen maintenance) • CE listed, suitable for wet location • IP65 rated for optical assembly • Meets ANSI 2G vibration standards • Class I
Mounting Accessory
DP6 SP6 TP6
TP7
L - Yoke
SP7
AT
DP7
WM
POST-TOP Ø60DOUBLE
POST-TOP Ø60 POST-TOP Ø60TRIPLE
POST-TOP Ø76TRIPLE
POLE Ø60
POST-TOP Ø76
POLE Ø60
POST-TOP Ø76DOUBLE
WALL
164
Ø60
184
Ø76
205
Ø60
159
205
Ø558
216
Dimensionsunit: mm
123
LED TUNNEL T150
Description Highly reliable energy efficient LED solution for tunnel
lighting application
Specifications&Features• Optimized optical design based on international road tunnel
and underpass lighting regulations
• Both symmetric & asymmetric light distribution options are available
• Utilizes high brightness LEDs, 70CRI at 6000K
• System rating is 50K hours @ L70
• 200-277V voltage available with electronic driver, PF>0.9, Class 1
• Meets ANSI 2G vibration standards
• Total system power consumption is 90W
• Color options : Black and Silver Grey
• Optimal operation temperature: -250C to 400C
Applications• City Tunnel
• Underpass
• Commercial and industrial garage lighting
Compliance• IP66
• UL
• CE
LED TUNNEL T150
LED TUNNEL T150 ELECTRICAL AND ORDERING INFORMATION
SKU SKU description Optical Code CCT (K) Lumens (lm) Wattage (W) Fixture color
61641 ETLB1AWF60G0NSGE Asymmetric Wide 6000K 5400lm 90W Silver Gray
61642 ETLB1AMF60G0NSGE Asymmetric Medium 6000K 5400lm 90W Silver Gray
61643 ETLB1SyF60G0NSGE Symmetric 6000K 5400lm 90W Silver Gray
61644 ETLB1AWF60G0NBKE Asymmetric Wide 6000K 5400lm 90W Black
61645 ETLB1AMF60G0NBKE Asymmetric Medium 6000K 5400lm 90W Black
61646 ETLB1SyF60G0NBKE Symmetric 6000K 5400lm 90W Black
124
LED LAMPS
Description• Energy efficient long life LED lamps for halogen and
incandescent replacement
Specifications&Features• Lamps are the same size as their incandescent or halogen
equivalents, having been designed around the international standard outline peak intensity (candela) and beam angle match incandescent or halogen equivalents
• Lamps are available in warm white color temperatures
• Excellent CRI >80
• High Power Factor >90%
• Low maintenance and easy installations
• Available in different beam angle, lamp base and wattages for versatile applications
Applications• Residential
• Commercial
• Hotel
• Retail
• Leisure
Compliance• RoHS
• CE
LED LAMPS
LED LAMPS ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Input Voltage Wattage Candela (cd) Beam Angle (deg) Socket CCT
R63
75294 LED 7/R63/830/220-240V/FL/E27 BX 1/8 220-240V 7 1200 20 E27 3000K
75296 LED 7/R63/830/220-240V/WFL/E27 BX 1/8 220-240V 7 520 36 E27 3000K
75295 LED 7/R63/830/220-240V/FL/B22 BX 1/8 220-240V 7 1200 20 B22 3000K
75297 LED 7/R63/830/220-240V/WFL/B22 BX 1/8 220-240V 7 520 36 B22 3000K
76093 LED 7/R63/827/220-240V/FL/E27 BX 1/8 220-240V 7 1200 20 E27 2700K
76094 LED 7/R63/827/220-240V/WFL/E27 BX 1/8 220-240V 7 520 36 E27 2700K
76099 LED 7/R63/827/220-240V/FL/B22 BX 1/8 220-240V 7 1200 20 B22 2700K
76100 LED 7/R63/827/220-240V/WFL/B22 BX 1/8 220-240V 7 520 36 B22 2700K
GU10
75280 LED 4/GU10/830/230V/WFL BX 1/8 230V 4 200 36 GU10 3100K
75281 LED 4/GU10/830/240V/WFL BX 1/8 240V 4 200 36 GU10 3100K
R50
75288 LED 4/R50/830/230V/WFL/E14 BX 1/8 230V 4 200 36 E14 3100K
75289 LED 4/R50/830/240V/WFL/E14 BX 1/8 240V 4 200 36 E14 3100K
PAR30
78553 LED10/PAR30/827/220-240V/FL/E27 BX1/6 220-240V 10 1600 24 E27 2700
78554 LED10/PAR30/827/220-240V/WFL/E27BX1/6 220-240V 10 900 36 E27 2700
78555 LED10/PAR30/830/220-240V/FL/E27 BX1/6 220-240V 10 1700 24 E27 3000
78556 LED10/PAR30/830/220-240V/WFL/E27BX1/6 220-240V 10 1000 36 E27 3000
78558 LED10/PAR30/765/220-240V/FL/E27 BX1/6 220-240V 10 2000 24 E27 6500
78557 LED10/PAR30/765/220-240V/WFL/E27BX1/6 220-240V 10 1200 36 E27 6500
125
TETRATM MINIMAX GEN3
Description LED signage lighting for mini and medium channel letters
Specifications&Features• OptiLens™ creates a wide 145° viewing angle, protects
LED against lumen degradation for greater ongoing performance
• Can be used in the sign depth as shallow as 38mm
• Bright, uniform light distribution with great light surface area coverage, pre-drilled hole makes mounting easy
• 3M VHB™ industrial grade mounting tape for greater flexibility
• Over moulded design protects components from moisture, damage and corrosion
• Power consumption per module 0.36W 3 LED’s per module and cut resolution between every module
• Operating temperature range - 400 to +600
Applications• Retail, Restaurant, Convenience store, Grocery, Casino,
Hospitality
Compliance• IP66 rated
• UL
• CE
• RoHS
TETRATM MINIMAX GEN 3
TETRATM MINIMAX GEN3 ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Color Order multiple Unit Type
GEWHMMTS8 Tetra® miniMAX, 7100K, 8 LEDs/ft. (~25 LEDs/m) White 1 Box
GEWWMMTS8 Tetra® miniMAX, 3200K, 8 LEDs/ft. (~25 LEDs/m) Warm White 1 Box
GEWWMMTS8-50 Tetra® miniMAX, 5000K, 8 LEDs/ft. (~25 LEDs/m) White 1 Box
GEWWMMTS8-41 Tetra® miniMAX, 4100K, 8 LEDs/ft. (~25 LEDs/m) White 1 Box
GEWHMMTS8WD Tetra® miniMAX, 7100K, 3 module sample 1 Box
GEWWMMTS8WD Tetra® miniMAX, 3200K, 3 module sample 1 Box
9409 18 AWG Supply Wire (0.82 mm2) 1 Spool
191600041 22-14 AWG Twist-on Wire Connector (0.33-2.08 mm2) 1 Bag
192160005 22-18 AWG In-line Splice Connector (0.33-0.82 mm2) 1 Bag
GEPS12-20 Power Supply Unit Input: 90-264VAC; Output 12VDC 10 EA
GEPS12-60 Power Supply Unit Input: 90-264VAC; Output 12VDC 10 EA
GEPS12-60U Power Supply Unit Input: 108-305VAC; Output 12VDC 10 EA
GEPS12D-60U Power Supply Unit Input: 90-305VAC; Output 12VDC 10 EA
GEPS12-180U Power Supply Unit Input: 90-305VAC; Output 12VDC 10 EA
126
TETRATM MAX – GEN 3
Description• LED signage lighting for medium channel letters
Specifications&Features• OptiLensTM patented lens technology maximises LED
performence
• Over moulded design protects components from moisture
• Color marking for easy identification
• Pre-drilled hole for easy mounting also protects components from being damaged by rivets or screws
• 3M VHB™ industrial grade mounting tape for greater convenience when installing
• Suggested sign depth 102mm or greater
• Power consumption per module 0.48W
• 3 LED’s per module and cut resolution between everymodule
• Operating temperature range - 40 deg. to 60 deg.
• Full range of color offering including white, warm white, red, blue, green
Applications• Retail, Restaurant, Convenience store , Grocery, Casino
Hospitality
Compliance• IP66 rated
• UL
• CE
• RoHS
TETRATM MAX-GEN 3
TETRATM MAX – GEN 3 ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Color Order multiple Unit Type
GEWHMXTS6 Tetra® MAX, 7100K, 6 LEDs/ft. (~19 LEDs/m) White 1 Box
GEWWMXTS6 Tetra® MAX, 3200K, 6 LEDs/ft. (~19 LEDs/m) Warm White 1 Box
GEWWMXTS6-50K Tetra® MAX, 5000K, 6 LEDs/ft. (~19 LEDs/m) White 1 Box
GEWWMXTS6-41K Tetra® MAX, 4100K, 6 LEDs/ft. (~19 LEDs/m) White 1 Box
GEWHMHTS6 Tetra® MAX High Output 7100K, 6 LEDs/ft. (~19 LEDs/m) White 1 Box
GEWWMHTS6 Tetra® MAX High Output 3200K, 6 LEDs/ft. (~19 LEDs/m) Warm White 1 Box
GEWWMHTS6-50K Tetra® MAX High Output 5000K, 6 LEDs/ft. (~19 LEDs/m) White 1 Box
GEWWMHTS6-41K Tetra® MAX High Output 4100K, 6 LEDs/ft. (~19 LEDs/m) White 1 Box
GEWHMXTS6WD Tetra® MAX, 7100K, 2 module sample white 1 Box
GEWWMXTS6WD Tetra® MAX, 3200K, 2 module sample warm white 1 Box
GEWHMHTS6WD Tetra® MAX High Output 7100K, 2 module sample white 1 Box
GEWWMHTS6WD Tetra® MAX High Output 3200K, 2 module sample warm white 1 Box
9409 18 AWG Supply Wire (0.82 mm2) - 1 Spool
191600041 22-14 AWG Twist-on Wire Connector (0.33-2.08 mm2) - 1 Bag
192160005 22-18 AWG In-line Splice Connector (0.33-0.82 mm2) - 1 Bag
GEPS12-20 Power Supply Unit Input: 90-264VAC; Output 12VDC - 10 EA
GEPS12-60 Power Supply Unit Input: 90-264VAC; Output 12VDC - 10 EA
GEPS12-60U Power Supply Unit Input: 108-305VAC; Output 12VDC - 10 EA
GEPS12D-60U Power Supply Unit Input: 90-305VAC; Output 12VDC - 10 EA
GEPS12-180U Power Supply Unit Input: 90-305VAC; Output 12VDC - 10 EA
127
TETRATM POWER MAX GEN 3
TETRA POWER MAX GEN 3
Description Led signage lighting for big channel letters and reverse halo
signs
Specifications&Features• Energy efficient bright uniform light and easy to install
• Over moulded design protects components from moisture
• OptiLens™ lens that maximizes light coverage and having a beam angle of 125 degree
• OptiLens protects LED against lumen degradation for greater ongoing performance
• Pre-drilled hole for easy mounting also protects components from being damaged by rivets or screws
• 3M VHB™ industrial grade mounting tape for greater convenience when installing
• Suggested sign depth as shallow as 4 inches
• Can cut between any module
• Operating temperature range - 400 to + 600
Applications• Retail
• Restaurant
• Convenience store
• Grocery
• Casino
• Hospitality
Compliance• IP66 rated
• UL
• CE
• RoHS
TETRA POWER MAX GEN 3 ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description ColorOrder
multipleUnit Type
GEWHPMTL5 Tetra® PowerMAX, 7100K, 5 LEDs/ft (~16 LEDs/m) White 1 Box
GEWWPMTL5 Tetra® PowerMAX, 3200K, 5 LEDs/ft (~16 LEDs/m) Warm White 1 Box
GEWWPMTL5-50 Tetra® PowerMAX, 5000K, 5 LEDs/ft (~16 LEDs/m) White 1 Box
GEWWPMTL5-41 Tetra® PowerMAX, 4100K, 5 LEDs/ft (~16 LEDs/m) White 1 Box
GEWHPMTL5WD Tetra® PowerMAX, 7100K, 2 Module Sample 1 Box
GEWWPMTL5WD Tetra® PowerMAX, 3200K, 2 Module Sample 1 Box
9409 18 AWG Supply Wire (0.82 mm2) 1 Spool
191600041 22-14 AWG Twist-on Wire Connector (0.33-2.08 mm2) 1 Bag
192160005 22-18 AWG In-Line Splice Connector (0.33-0.82 mm2) 1 Bag
GEPS12-20 Power Supply Unit Input: 90-264VAC; Output 12VDC 10 EA
GEPS12-60 Power Supply Unit Input: 90-264VAC; Output 12VDC 10 EA
GEPS12-60U Power Supply Unit Input: 108-305VAC; Output 12VDC 10 EA
GEPS12D-60U Power Supply Unit Input: 90-305VAC; Output 12VDC 10 EA
GEPS12-180U Power Supply Unit Input: 90-305VAC; Output 12VDC 10 EA
128
TETRATM CONTOUR
Description Flexible LED light engine and rigid, optically diffuse
extruded-plastic light guide for variety of architectural needs
Specifications&Features• Light Engine of TetraTM Contour is flexible
• Viewing angle is up to 330 degree with the light guide which create the bright and uniform light effect
• Flexible light engine provides uniform light and can be used without light guide in low profile indoor accent applications
• Diffused light guide gives the appearance of neon up to 40% energy efficiency over neon
• Can be mounted using light guide mounting clips or standard neon hardware
• End caps provide finished appearance
• Simple installation using light engine mounting clip in low-profile designs
• Seamless designs can be created using the light guide connector
• Operating temperature range - 40 deg. to 55 degree
• Full range of color offering including red, green, blue, white, warm white
• Long life, durable/impact resistant, can be formed on-site
Applications• Retail
• Restaurant
• Convenience store
• Grocery
• Casino
• Hospitality
Compliance• IP66 rated
• UL
• CE
• RoHS
TETRA CONTOUR
129
TETRA CONTOUR ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Product Description ColorOrder
MultipleUnit Type
GEBLXNLGP15 Contour,BL,90D planar corner Tetra® Contour Light Guide 90° Blue Planar Corner Blue 1 BGGEBLXNLGO15 Contour,BL,90D outside corner Tetra® Contour Light Guide 90° Blue Outside Corner Blue 1 BGGEGLXNLGI15 Contour,GR,90D inside corner Tetra® Contour Light Guide 90° Green Inside Corner Green 1 BGGERDXNLGC15 Contour,RD LG connector Tetra® Contour Red Light Guide Connector Red 1 BGGERDXNLGP15 Contour,RD,90D planar corner Tetra® Contour Light Guide 90° Red Planar Corner Red 1 BG
GEXNLGI15 Contour,WH,90D inside corner Tetra® Contour Light Guide 90° White Inside Corner White 1 BGGEBLXNLG15 Contour,BL,LG Tetra® Contour Blue Light Guide Blue 1 BXGEXNLGC15 Contour,WH LG connector Tetra® Contour White Light Guide Connector White 1 BG
GEBLXNLGC15 Contour,BL,LG connector Tetra® Contour Blue Light Guide Connector Blue 1 BGGEXNLG15 Contour,WH,LG Tetra® Contour White Light Guide White 1 BX
GERDXNLG15 Contour,RD,LG Tetra® Contour Red Light Guide Red 1 BXGEBLXNLGEC15 Contour,BL LG end cap Tetra® Contour Blue Light Guide End Cap Blue 1 BGGELGXNLGEC15 Contour,LimeGR LG end cap Tetra® Contour Lime Green Light Guide End Cap Lime Green 1 BGGEYAXNLGO15 Contour,YL,90D outside corner Tetra® Contour Light Guide 90° Yellow Outside Corner Yellow 1 BGGEYAXNLGI15 Contour,YL,90D inside corner Tetra® Contour Light Guide 90° Yellow Inside Corner Yellow 1 BGGELGXNLGP15 Contour,LimeGR,90D planar corner Tetra® Contour Light Guide 90° Lime Green Planar Corner Lime Green 1 BG
GEXNWB2 Weather box Weather Box 1 BGGERDXNLGO15 Contour,RD,90D outside corner Tetra® Contour Light Guide 90° Red Outside Corner Red 1 BG
GEXNMCAC Contour,LE,mounting clip Tetra® Contour Light Engine Mounting Clip 1 BGGEXNBA Contour,Silicone Bend-Aid Tetra® Contour Silicone Bend-Aid (Reusable) 1 BG
GERDXNLGI15 Contour,RD,90D inside corner Tetra® Contour Light Guide 90° Red Inside Corner Red 1 BGGEXNLGO15 Contour,WH,90D outside corner Tetra® Contour Light Guide 90° White Outside Corner White 1 BG
GEGLXNLGEC15 Contour,GR LG end cap Tetra® Contour Green Light Guide End Cap Green 1 BGGEGLXNLGC15 Contour,GR,LG connector Tetra® Contour Green Light Guide Connector Green 1 BGGELGXNLGC15 Contour,LimeGR connector Tetra® Contour Lime Green Light Guide Connector Lime Green 1 BGGELGXNLG15 Contour,LimeGR,LG Tetra® Contour Lime Green Light Guide Lime Green 1 BXGEXNLGP15 Contour,WH,90D planar corner Tetra® Contour Light Guide 90° White Planar Corner White 1 BG
GELGXNLGI15 Contour,LimeGR,90D inside corner Tetra® Contour Light Guide 90° Lime Green Inside Corner Lime Green 1 BGGEXNSC2 Splice connector Splice Connector, Generation 2, One-Piece with Gel; 1 SL
GEPOXNLGO15 Contour,OR,90D outside corner Tetra® Contour Light Guide 90° Orange Outside Corner Orange 1 BGGEPOXNLG15 Contour,OR,LG Tetra® Contour Orange Light Guide Orange 1 BXGEPOXNLGI15 Contour,OR,90D inside corner Tetra® Contour Light Guide 90° Orange Inside Corner Orange 1 BGGEPOXNLGP15 Contour,OR,90D planar corner Tetra® Contour Light Guide 90° Orange Planar Corner Orange 1 BG
GEPOXNLGEC15 Contour,OR LG end cap Tetra® Contour Orange Light Guide End Cap Orange 1 BGGERDXNLGEC15 Contour,RD LG end cap Tetra® Contour Red Light Guide End Cap Red 1 BGGELGXNLGO15 Contour,LimeGR,90D outside corner Tetra® Contour Light Guide 90° Lime Green Outside Corner Lime Green 1 BGGEGLXNLGO15 Contour,GR,90D outside corner Tetra® Contour Light Guide 90° Green Outside Corner Green 1 BGGEGLXNLG15 Contour,GR,LG Tetra® Contour Green Light Guide Green 1 BX
9409 18 AWG,supply wire,0.82mm2 18 AWG Supply Wire (0.82 sq. mm) 1 SPGEPOXNLGC15 Contour,OR LG connector Tetra® Contour Orange Light Guide Connector Orange 1 BGGEXNLGEC15 Contour,WH LG end cap Tetra® Contour White Light Guide End Cap White 1 BG
GEGLXNLGP15 Contour,GR,90D planar corner Tetra® Contour Light Guide 90° Green Planar Corner Green 1 BGGEBLXNLGI15 Contour,BL,90D inside corner Tetra® Contour Light Guide 90° Blue Inside Corner Blue 1 BGGEYAXNLGP15 Contour,YL,90D planar corner Tetra® Contour Light Guide 90° Yellow Planar Corner Yellow 1 BGGEYAXNLGC15 Contour,YL LG connector Tetra® Contour Yellow Light Guide Connector Yellow 1 BG
191600041 Twist-on connectors(0.33-0.82mm2) 22-14 AWG Twist-On Wire Connectors (0.33 – 2.08 sq. mm) 1 BGGEXNMC15 Contour,LG,mounting clip Tetra® Contour Light Guide Mounting Clip 1 BG
GEYAXNLG15 Contour,YL,LG Tetra® Contour Yellow Light Guide Yellow 1 BXGEYAXNLGEC15 Contour,YL LG end cap Tetra® Contour Yellow Light Guide End Cap Yellow 1 BGGEBLXNLA2-BL Contour LS BL LE&LG Tetra® Contour LS Blue Light Engine and Blue Light Guide Blue 1 BXGEGLXNLA2-GL Contour LS GR LE&LG Tetra® Contour LS Green Light Engine and Green Light Guide Green 1 BXGEGLXNAA2-GL Contour LS Ext. GR LE&LG Tetra® Contour LS Extension Green Light Engine and Green Light Guide Green 1 EA
GERCXNLE1 Contour,RO,LE Tetra® Contour Red-Orange LED Light Engine Red-Orange 1 BXGERDXNLE1 Contour,RD,LE Tetra® Contour Red LED Light Engine Red 1 BX
GEBLXNAA2-BL Contour LS Ext. BL LE&LG Tetra® Contour LS Extension Blue Light Engine and Blue Light Guide Blue 1 EAGERDXNAA2-RD Contour LS Ext. RD LE&LG Tetra® Contour LS Extension Red Light Engine and Red Light Guide Red 1 EA
GEWHXNAA2-WH Contour LS Ext. CW,6500K,LE&LGTetra® Contour LS Extension White Light Engine (6500K) and White Light
GuideWhite 1 EA
GEWWXNLE1 Contour,WW,3200K,LE Tetra® Contour Warm White (3200K) LED Light Engine Warm White 1 BXGEWHXNLE1 Contour,CW 6500K,LE Tetra® Contour White (6500K) LED Light Engine White 1 BXGEGLXNLE1 Contour,GR,LE Tetra® Contour Green LED Light Engine Green 1 BX
GEWHXNLA2-WH Contour LS,CW,6500K,LE&LG Tetra® Contour LS White Light Engine (6500K) and White Light Guide White 1 BXGEBLXNLE1 Contour,BL LE Tetra® Contour Blue LED Light Engine Blue 1 BX
GERDXNLA2-RD Contour LS RD LE&LG Tetra® Contour LS Red Light Engine and Red Light Guide Red 1 BXGEYAXNLE1 Contour,AM,LE Tetra® Contour Amber LED Light Engine Amber 1 BX
GEPS24W-80 24V,80W,wet rated PSPower Supply (24VDC/80W), Input Voltage: 90-264VAC; Wet Location
Rated; 1 Output Bank; Class 210 EA
GEPS24-100U 108-305V input,24VDC,100WPower Supply (24VDC / 100W), Input Voltage: 108-305VAC; Damp Rated;
Self-Contained, Remote or Raceway; 1 Output Bank; Class 210 EA
GEPS24-20 90-264V input,24VDC,20WPower Supply (24VDC/20W), Input Voltage: 90-264VAC; Damp Rated; Self-
Contained, Remote or Raceway; 1 Output Bank; Class 210 EA
GEPS24-80 108-264V input,24VDC,80WPower Supply (24VDC / 80W), Input Voltage: 108-264VAC; Damp Rated;
Self-Contained, Remote or Raceway; 1 Output Bank; Class 210 EA
130
TETRATM POWER STRIP & DS
Description Energy efficient, heighten visual performance LED lighting
for single-sided box signs and double-sided box sings
Specifications&Features• LED lights facing to the box billboard
• High output light source flat plate type
• Energy-saving and long service life
• Energy saving is up to 84% comparing with GE LFL
• Available in white 6500K, neutral white 4100K
• Two solutions as available for different signs (PowerStrip: Single side light up; PowerStrip DS: Double side light up)
• Can be used in the sign depth as shallow as 127mm (Single side lit-up) or 254mm (Double side lit-up)
• Operating temperature range -40 degree to 55 degree
Applications• Retail
• Restaurant
• Convenience store
• Petroleum
• Banks
• Grocery
• Hospitality
• Shopping centers
Compliance• IP66 rated
• UL
• CE
• RoHS
TETRA POWERSTRIP & DS
TETRA POWER STRIP & DS ELECTRICAL AND ORDERING INFORMATION
SKU SKU Description Color Order Multiple Unit Type
GEDSAS1 PowerStrip Assembly Support 1 BG
GEDSAT96 PowerStrip Tube Clear 1 BX
GEDSMB1 PowerStrip Assembly End Cap 1 BX
GEDSTC1 PowerStrip Tube Connector 1 BX
GEWWSSP3-41K PowerStrip, 4100K, 3 LED Module Warm White 1 BX
GEWHSSP3-65K PowerStrip, 6500K, 3 LED Module White 1 BX
GEPS12-20 Power Supply 10 EA
GEPS12-60U Power Supply 10 EA
GEPS12-60 Power Supply 10 EA
GEDSMB1 PowerStrip Assembly End Cap 1 BX
GEDSTC1 PowerStrip Tube Connector 1 BX
GEDSAT96 PowerStrip Tube Clear 1 BX
GEDSAS1 PowerStrip Assembly Support 1 BG
GEWWDSP6-41K PowerStrip DS, 4100K, 6 LED Module Warm White 1 BX
GEWHDSP6-65K PowerStrip DS, 6500K, 6 LED Module White 1 BX
GEPS24-20 Power Supply 10 EA
GEPS24-100U Power Supply 10 EA
GEPS24-80 Power Supply 10 EA
accessories
accessories
FTL – EM BALLAST 135
CFL – EM BALLAST 136
FTL – HF BALLAST 137
CFL – HF BALLAST 138
HID – EM OC BALLAST 139
CG BOX V2 140
IGNITOR IMPULSER 141
IGNITOR SIP 142
135
FTL – EM BALLAST
Description Electromagnetic copper wound, open construction ballast for fluorescent
lamps to be operated on 240V, 50Hz supply
Specifications&Features• Class H insulated copper wire
• Low loss silicon steel lamination
• Vacuum impregnated high quality varnish
• Long life and low temperature rise
• Ease of installation and wiring
• Compact size
• Mounting holes matches with most standard types of luminaries available
Applications• Commercial lighting
• Industrial lighting
• Road lighting
Compliance• IEC 60920 - Safety
• IEC 60921 – Performance
FTL–EM BALLASTFTL–EM BALLAST
FTL-EM BALLLAST ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Tw (°C) Delta-T (°C)
Dimension (mm) AxBxC
Ordering code
BSF 1824E 1X18/20W FTL 240 0.15 130 70 139X40X32 L2460
BSF 3624E 1X36/40W FTL 240 0.25 130 70 139X40X32 L2461
136
CFL – EM BALLAST
Description Electromagnetic copper wound, open construction ballast for compact
fluorescent lamps to be operated on 240V, 50Hz supply
Specifications&Features• Class H insulated copper wire
• Low loss silicon steel lamination
• Vacuum impregnated high quality varnish
• Long life and low temperature rise
• Ease of installation and wiring
• Compact size
• Mounting holes matches with most standard types of luminaries available
Applications• Reception areas for offices
• Retail applications
• Hospitals
Compliance• IEC 60920 - Safety
• IEC 60921 – Performance
CFL–EM BALLASTCFL–EM BALLAST
CFL-EM BALLLAST ELECTRICAL AND ORDERING INFORMATION
Model Lamp TypeNominal
voltage (V)Mains
current (A)Tw (°C) Delta-T (°C)
Dimension (mm) AxBxC
Ordering code
BSC 91124 1 X 9/11WSBX 240 0.17 130 60 96X42X28 L0772
BSC 101342 1X10/13W DBX 240 0.19 130 60 96X42X28 L0773
BSF1824B 1X18W DBX 240 0.22 130 60 96X42X28 L2460B
BSF2624V 1X26W DBX 240 0.32 130 60 140X42X28 L0772V
137
FTL – HF BALLAST
Description Electronic high frequency ballast suitable for T8 and T5
fluorescent lamps
Specifications&Features• Housing made of Pre-coated steel / PC
• Operating voltage range 180V to 265V
• High power factor
• Can operate from 0 deg to 50 deg
• Flicker - free warm start gives longer lamp life Protection
• Over voltage protection
• Inrush current protection
• De-activated lamp protection
• End of lamp life protection
FTL–HF BALLASTFTL–HF BALLAST
FTL–HF BALLAST ELECTRICAL AND ORDERING INFORMATION
Model Lamp Type/ WattageNominal
Voltage(V)Mains
Current (A)TC (°C) PF
Dimension (mm) AxBxC
Ordering Code
L24F28WS1P T5, 1x28W 240 0.14 65 0.95 190X31X22 L2570
L24F28WS2P T5, 2x28W 240 0.272 65 0.95 275X31X22 L2571
L24F14WS1P T5, 1x14W 240 0.072 65 0.95 190X31X28L2573
L24F14WS2P T5, 2x14W 240 0.14 65 0.95 275X31X28
EBP 254TL5.G T5, 2x54W 240 0.46 65 0.98 256X30X28 L2457
EBP 314TL5.G T5, 3x14W 240 0.2 65 0.98 258X40X28 L2478
EBP 414TL5.G T5, 4x14W 240 0.29 65 0.98 258X40X29 L2477
L24F18WS1P T8, 1x18W 240 0.078 65 0.95 190X31X28 L2578
L24F18WS2P T8, 2x18W 240 0.15 65 0.95 220X39X32 L2579
L24F36WS2PA T8, 2x36W 240 0.573 65 0.98 280x40x32 L2577
L24F36WS1PA T8, 1x36W 240 0.28 65 0.98 235X31X28 L2576
EBP154 T5, 1x54W 240 0.46 65 0.98 280X40X29 L2575
Applications• Residential lighting
• Industrial lighting
• Commercial lighting
• Railway stations
• Airports
• Hospitals
• Hotels
• Retail lighting
Compliance• EN61347-2-3 - Safety
• EN60929 – Performance
• EN55015 – EMI/RFI
• EN61000-3-2 – Harmonics
• EN61547 - Surge
138
CTL-HF BALLLAST ELECTRICAL AND ORDERING INFORMATION
Model Lamp Type/ WattageNominal
Voltage(V)Mains
Current (A)TC (°C) PF
Dimension (mm) AxBxC
Ordering Code
L24CF36WS1P CFL, 1x36W 240 0.16 65 0.95 190X31X28 L2171
L24CF55WS1A CFL, 1x55W 240 0.26 65 0.95 258X39X32 L2172
S24CF26WS1P CFL, 1x26W 240 0.10 65 0.95 91X73X32 L1558
S24CF18WS1P CFL, 1x18W 240 0.08 65 0.95 82X73X28 L1559
S24CF13WS1P CFL, 1x13W 240 0.05 65 0.95 82X73X28 L0944
L24CF36IS3A CFL, 3x36W 240 0.48 65 0.98 305X42X36 L1343
L24CF36WS2PA CFL, 2x36W 240 0.03 65 0.98 280X40X32 L1344
S24CF11WS1A CFL, 1x9/11W 240 0.04 65 0.98 113X73X32 L0936
S24CF18WS1A CFL, 1x18W 240 0.08 65 0.98 113X73X32 L0937
139
HID – EM OC BALLAST ELECTRICAL AND ORDERING INFORMATION
Model Lamp Type Nominal Voltage(V) Mains Current (A) Dimension (mm) AxBxC Ordering Code
Copper Ballast Range
BVSM70 1X70W HPSV/ARC MH 240 0.45 104X68X56 L2279
BVSM150 1X150W HPSV/ARCMH 240 0.85 140X68X56 L2280
BVSM250 1X250W HPSV/ARC MH 240 1.4 145X77X64 L2281
BVSM400 1X400W HPSV/ARC MH 240 2.2 160X86X72 L2282
BVHM80 1X80W HPMV 240 0.45 104X68X56 L2286
BVHM125 1X125W HPMV 240 0.63 140X68X56 L2287
BVHM250 1X250W HPMV/KRC MH 240 1.3 140X68X56 L2284
BVHM400 1X400W HPMV/KRC MH 240 2.2 145X77X64 L2283
Aluminium Ballast Range
BVSMA70 1X70W HPSV/ARC MH 240 0.45 110X69X56 L2279A
BVSMA150 1X150W HPSV/ARCMH 240 0.85 140X69X56 L2280A
BVSMA250 1X250W HPSV/ARC MH 240 1.4 145X86X71 L2281A
BVSMA400 1X400W HPSV/ARC MH 240 2.2 160X86X81 L2282A
BVHMA250 1X250W HPMV/KRC MH 240 1.3 145X86X71 L2284A
BVHMA400 1X400W HPMV/KRC MH 240 2.2 160X86X81 L2283A
140
CG BOX V2
Description Non Integral Die-cast aluminum housing Control gear box
suitable for 70W, 150W, 250W, 400W HPSV/ Metal Halide lamps and 80W, 125W, 250W and 400W HPMV lamps
Specifications&Features• Housing and front cover made of die-cast aluminium alloy
(LM6) powder coated for better corrosion resistant
• CG Box is pre wired with open construction EM Ballast, ignitor and power factor improvement capacitor,mains and lamp connector
• The hingeable front cover can fix with the housing with the help of two SS captive screws
• EPDM gasket
• Loop-in-Loop-out option for cable entry through cable glands
• 4 way 10A PBT for loop out & 2W-10A PBT for lamp connector
• Control gear: HID EM ballast, ignitor, power factor improvement capacitor
Installation• Provision for two point fixing with M10 bolt on in-built U libs
provided in the housing
• Cable entry through PG11 cable gland
CG BOX ELECTRICAL AND ORDERING INFORMATION
Model Lamp Ballast Ignitor CapacitorMains
Current (A)PF Ordering Code
Ordering Code with ballast
GBCV2 1400SV 400W HPSV /ARC MH L2282 L2278 L2296 (42Mfd) 2.2 > 0.85 L1900V2 FLGBC400SV
GBCV2 1250SV 250W HPSV / ARC MH L2281 L2278 L2295 (33 Mfd) 1.4 > 0.85 L1901V2 FLGBC250SV
GBC 1150SV 150W HPSV/ARC MH L2280 L2278 L2293 (20 Mfd) 0.85 > 0.85 L1902 FLGBC150SV
GBC 170SV 70W HPSV/ARC MH L2279 L2278 L2292 (12 Mfd) 0.45 > 0.85 L1903 FLGBC70SV
GBCV2 1250MV 250W HPMV L2284 NA L2293 (20 Mfd) 1.3 > 0.85 L1906V2 FLGBC250MV
GBCV2 1400MV 400W HPMV L2283 NA L2294 (25 Mfd) 2.2 > 0.85 L1907V2 FLGBC400MV
GBC 1125MV 125W HPMV L2287 NA L2292 (12 Mfd) 0.63 > 0.85 L1908 FLGBC125MV
GBC 180MV 80W HPMV L2286 NA L2291 ( 8 Mfd) 0.45 > 0.85 L1911 FLGBC80MV
GBCV2 1250KRC 250W KRC MH L2284 L2278 L2293 (20 Mfd) 1.3 > 0.85 L1912V2 FLGBC250MHK
GBCV2 1400 KRC 400W KRC MH L2283 L2278 L2294 (25 Mfd) 2.2 > 0.85 L1913V2 FLGBC400MHK
CG BOX V2CG BOX V2
Maintenance• Remove two screws for maintenance
Applications• Non Integral application like
• Industrial
• Flood
• Building façade
• High Mast application
Compliance• IP65
141
IGNITOR IMPULSER
Description Impulser type universal ignitor suitable for 70 to 400W
HPSV and metal halide lamps
Specifications&Features• V230002.G A Impulse type Ignitor suitable for 70W to 400W
HPSV/MH Lamp
• V230002.G is Universal Ignitor for integral/Non Integral Application up to 30m Distance with Standard cable
• Aesthetically appealing housing is made up of poly-carbonate material
• Electric components are protected from moisture with the help of poly-urethane filling
• Ignitor has high permissible case temperature (TC) upto 950 C
• The Inbuilt threaded (M8) stud with spring washer & nut allows universal mounting
• The components used in this ignitor comply with ROHS and FR grade requirement with UL approval
• Intelligent selection of ignitor tapping position (IGN) which gives the consistant and reliable ignition voltage
• It confirm IEC 61347-2-3 EN 61347-2-3, ANSI (ignitor compability) standards
IGNITOR - IMPULSER ELECTRICAL AND ORDERING INFORMATION
Model Description Lamp Type TC (°C)Dimension in (mm)
AXBXCXOrdering Code
V230002.G Impulser Ignitor 1X70-400W HPSV/ARC & KRC MH 95 62 x 28 x 27 L2278
IGNITOR IMPULSERIGNITOR IMPULSER
Applications• To the application of HID lamps and ballasts
Compliance• Electronic components complies ROHS and FR grade
required with UL requirements.
• IEC 60927
• EN 61347-1
142
IGNITOR - SIP
IGNITOR SIP
Description Super imposed type universal ignitor suitable for 70 to
400W HPSV and metal halide lamps
Specifications&Features• V130003.G A super imposed type ignitor suitable for 70W to
400W HPSV/MH Lamps
• V130003.G – super imposed type ignitor is suitable upto 3 meter lamp-ignitor distance
• Aesthetically appealing housing is made up of poly-carbonate material
• Electric components are protected from moisture with the help of poly-urethane filling
• Ignitor has high permission case temperature (TC) upto 1050 C
• The inbuilt threaded (M8) stud with spring washer & nut allows universal mounting
• The components used in this ignitor comply with ROHS and FR grade requirement with UL approval
• The maximum lamp current flows through this ignitor is 5A (1 max 5A)
• It confirms IEC 61347-2-3 EN 61347-2-3, ANSI (ignitor compatibility) standards
IGNITOR - SIP
IGNITOR - SIP ELECTRICAL AND ORDERING INFORMATION
Model Description Lamp Type TC (°C)Dimension in (mm)
AXBXCXOrdering Code
V130003.G Superimposed Ignitor 1X70-400W HPSV/ARC & KRC MH 105 84 x 34 x 27 L2288
Applications• To the application of HID Lamps and Ballast
Compliance• Electronic components complies ROHS and FR grade
required with UL requirements
• IEC 60927
• EN 61347-1
143
| Accent Lighting Directional lighting to emphasize a particular object or surface
feature
| Ambient Lighting Lighting throughout an area that produces general illumination
| Average illuminance Surface illuminance averaged over the specified surface
| Beam angle The angle between the two directions for which the intensity
is 50% of the maximum intensity as measured in a plane
through the nominal beam center line
| Beam spread The angle (in the plane through the beam axis) over which the
luminous intensity drops to a stated percentage of its peak
intensity
| Black Light UV energy near the Visible spectrum (315 to 400 nM )
|Coefficientofutilization The ratio of luminous flux (lumens) calculated as received on
the work plane to the total luminous flux (lumens) emitted by
the lamps alone. It is equal to the product of room utilization
factor and luminaire efficiency
| Color rendering index A measure of the degree of color shift objects undergo when
illuminated by the light source as compared with those same
objects when illuminated by a reference source of comparable
color temperature
| Color temperature of a light source Temperature of the black body that emits radiation of the
same chromacity as the radiation considered. Unit Kelvin, K
| Colour appearance General expression for the colour impression received when
looking at a light source
|Cutoffangle(ofaluminaire) The angle, measured up from nadir, between the vertical axis
and the first line of sight at which the bare source is not visible.
|Dichroicfilter A filter that transmits certain wavelengths and reflects those
not transmitted; the absorption is small
|Diffusedlighting Lighting provided on the work plane or on an object that is not
incident predominantly from any particular direction
| Disability Glare Glare which impairs the vision of objects without necessarily
causing discomfort
Glossary of Terms
| Discomfort Glare Glare which causes discomfort without necessarily
impairing the vision of objects
| Discharge lamp An electric - discharge lamp in which light is produced by
electric current flowing between electrodes in an envelope
| Fluorescence The emission of light as the result of and only during, the
absorption of radiation of shorter wavelengths
| Fluorescent lamp A low-pressure mercury electric-discharge lamp in which
a phosphor coating (phosphor) transforms some of the UV
energy generated by the discharge into light
| General lighting Lighting designed to provide a substantially uniform level of
illuminance throughout an area, exclusive of any provision
for special local requirements
| Glare Condition of vision in which there is discomfort or a
reduction in the ability to see significant object, or both, due
to an unsuitable distribution or range of luminance or to
extreme contrasts in space of time
| Goniophotometer A photometer for measuring the directional light
distribution characteristics of sources, luminaires, media
and surfaces halogen lamp Gas filled lamp containing
tungsten filament and a small portion of halogens
| High-pressure sodium (HPS) lamp A high-intensity discharge (HID) lamp in which light is
produced by radiation from sodium vapor operating at a
partial pressure of about 1.33 × 104 Pa (100 Torr)
| Ignitor Device, either by itself or in association with other
components, that generates voltage pulses to start
discharge lamps without preheating of electrodes
| Illuminance The areal density of the luminous flux incident at a point on
a surface
| Incandescence The self-emission of radiant energy in the visible spectrum
due to the thermal excitation of atoms or molecules
| Indirect lighting Lighting involving luminaires that distribute 90 to 100% of
the emitted light upward
144
| Isocandela line Line plotted on any appropriate set of coordinates to
show directions in space, about a source of light, in which
the intensity is the same. A series of such curves, often
for equal increments of intensity is called an isocandela
diagram
| Lamp lumen depreciation (LLD) factor The fractional loss of lamp lumens at rated operating
conditions that progressively occurs during lamp operation
| Light Radiant energy that is capable of exciting the retina and
producing a visual sensation. The visible portion of the
electromagnetic spectrum extends from about 380 to
770 nm
| Light center length The distance from the light center to a specified reference
point on the lamp
| Light loss factor (LLF) The ratio of illuminance (or exitance or luminance) for a
given area to the value that would occur if lamps operated
at their (initial) rated lumens and if no system variation or
depreciation had occurred formerly called maintenance
factor
| Light output ratio The ratio of total light emitted by a luminaire to the total
light output of the lamps it contains
| Louver A series of baffles used to shield a source from view at
certain angles, to absorb or block unwanted light, or to
reflect or redirect light. The baffles are usually arranged in a
geometric pattern
| Luminaire (light fixture) A complete lighting unit consisting of a lamp or lamps
and ballast(s) (when applicable) together with the parts
designed to distribute the light, to position and protect the
lamps, and to connect the lamps to the power supply
| Luminaire dirt depreciation The fractional loss of task illuminance due to luminaire dirt
accumulation
|Luminousefficacy A measurement of how effectively the light source is in
converting electrical energy to lumens of visible light. It is
expressed in lumens per watt
|Luminousflux Total quantity of light emitted by a light source per second
| Luminous intensity Luminous flux in a certain direction radiated per solid angle
| Lux Unit of illuminance of a surface being lit . i.e., lumen per
square meter
| Maintenance factor Ratio of average illuminance on the working plane after
a specified period of use of a lighting installation to the
average illuminance obtained under the same conditions
for a new installation
| Metal halide lamp A high-intensity discharge (HID) lamp in which the major
portion of the light is produced by radiation of metal halides
and their products of dissociation--possibly in combination
with metallic vapors such as mercury
| Phosphorescence The emission of light as the result of the absorption of
radiation, and continuing for a noticeable length of time
after excitation
| Photometer An instrument for measuring photometric quantities
such as luminance, luminous intensity, luminous flux, or
illuminance
| Power factor The ratio of the power in watts to the product of the rms
values of voltage and current. For sinusoidal waveforms,
its is equal to the cosine of the angle of phase difference
between voltage and current
|Roomutilizationfactor The ratio of the luminous flux (lumens) received on the work
plane to that emitted by the luminaire
| Spacing-to-mounting-height ratio Ratio of the actual distance between luminaire centers to
the mounting height above the work plane
| Uniformity Uniformity ratio of illuminance, on a given plane, is measure
of the variation of illuminance over the plane expressed
as either, A. The ratio of the minimum to the maximum
illuminance. B. The ratio of the minimum to the average
illuminance
|Utilizationfactor Measures the efficiency of the lighting scheme to deliver the
light to the working plane relative to the room/environment
it is operating within
145
CAPDrawings
All cap drawings are a guide, if further technical details are required please contact your nearest sales office.
B15 B22 E14 E27 E40
GU4 GU5.3 GU10 GY6.35G6.35
GZ6.35
GX10GX9.5 GY9.5 GY9.5/Heat Sink
GX16dGX5.3
G9G5 G13G10q G12G8.5
GU6.5
G22 G383.5G4G
GZ9.5
GR8 GR10q GRY10q-3 GRZ10d GRZ10t
P28s Ferule ScrewTerminal
Cylinder P40s Ext. Mog End PrGX16d
Mog End PrGX16d
DC Bay
R7s SFa21-12 SFc 10-4 1” RibbonLeads
X515SFc 10.5-6
G24q-2 G24q-3 GX24d-1 GX24d-2 GX24d-3
GX24q-1 GX24q-2 GX24q-3 GX24q-4 GX24q-5 GX24q-6
G232G7 G24d-1 G24d-2 G24d-3
G24q-1
2G11
Cap Drawings
146
CAPDrawings
All cap drawings are a guide, if further technical details are required please contact your nearest sales office.
B15 B22 E14 E27 E40
GU4 GU5.3 GU10 GY6.35G6.35
GZ6.35
GX10GX9.5 GY9.5 GY9.5/Heat Sink
GX16dGX5.3
G9G5 G13G10q G12G8.5
GU6.5
G22 G383.5G4G
GZ9.5
GR8 GR10q GRY10q-3 GRZ10d GRZ10t
P28s Ferule ScrewTerminal
Cylinder P40s Ext. Mog End PrGX16d
Mog End PrGX16d
DC Bay
R7s SFa21-12 SFc 10-4 1” RibbonLeads
X515SFc 10.5-6
G24q-2 G24q-3 GX24d-1 GX24d-2 GX24d-3
GX24q-1 GX24q-2 GX24q-3 GX24q-4 GX24q-5 GX24q-6
G232G7 G24d-1 G24d-2 G24d-3
G24q-1
2G11
147
Lamp Data
T5 STAR COAT LAMPS ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
72408 F14W/T5/830/Starcoat/40 14 1350 3000 85 36000 G5
72409 F14W/T5/840/Starcoat/40 14 1350 4000 85 36000 G5
72410 F14W/T5/865/Starcoat/40 14 1250 6500 85 36000 G5
72411 F21W/T5/830/Starcoat/40 21 2100 3000 85 36000 G5
72412 F21W/T5/840/Starcoat/40 21 2100 4000 85 36000 G5
72413 F21W/T5/865/Starcoat/40 21 1950 6500 85 36000 G5
72420 F24W/T5/830/Starcoat/40 24 2000 3000 85 36000 G5
72421 F24W/T5/840/Starcoat/40 24 2000 4000 85 36000 G5
72422 F24W/T5/865/Starcoat/40 24 1900 6500 85 36000 G5
72414 F28W/T5/830/Starcoat/40 28 2900 3000 85 36000 G5
72415 F28W/T5/840/Starcoat/40 28 2900 4000 85 36000 G5
72416 F28W/T5/865/Starcoat/40 28 2700 6500 85 36000 G5
72417 F35W/T5/830/Starcoat/40 35 3650 3000 85 36000 G5
72418 F35W/T5/840/Starcoat/40 35 3650 4000 85 36000 G5
72419 F35W/T5/865/Starcoat/40 35 3400 6500 85 36000 G5
72423 F39W/T5/830/Starcoat/40 39 3500 3000 85 36000 G5
72424 F39W/T5/840/Starcoat/40 39 3500 4000 85 36000 G5
72425 F39W/T5/865/Starcoat/40 39 3330 6500 85 36000 G5
72426 F49W/T5/830/Starcoat/40 49 4900 3000 85 36000 G5
72427 F49W/T5/840/Starcoat/40 49 4900 4000 85 36000 G5
72428 F49W/T5/865/Starcoat/40 49 4650 6500 85 36000 G5
72429 F54W/T5/830/Starcoat/40 54 5000 3000 85 36000 G5
72430 F54W/T5/840/Starcoat/40 54 5000 4000 85 36000 G5
72431 F54W/T5/865/Starcoat/40 54 4750 6500 85 36000 G5
72432 F80W/T5/830/Starcoat/40 80 7000 3000 85 36000 G5
72433 F80W/T5/840/Starcoat/40 80 7000 4000 85 36000 G5
72434 F80W/T5/865/Starcoat/40 80 6650 6500 85 36000 G5
148
Lamp Data
T5 WATTMISER LAMPS ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
71632 F14T5/830/WM/ECO 13 1350 3000 85 30000 G5
71634 F14T5/841/WM/ECO 13 1350 4000 85 30000 G5
71636 F14T5/865/WM/ECO 13 1250 6500 85 30000 G5
71637 F21T5/830/WM/ECO 20 2100 3000 85 30000 G5
71639 F21T5/841/WM/ECO 20 2100 4000 85 30000 G5
71641 F21T5/865/WM/ECO 20 1950 6500 85 30000 G5
71642 F28T5/830/WM/ECO 26 2900 3000 85 30000 G5
71644 F28T5/841/WM/ECO 26 2900 4000 85 30000 G5
71646 F28T5/865/WM/ECO 26 2700 6500 85 30000 G5
71627 F54T5/830/WM/ECO 51 5000 3000 85 30000 G5
71629 F54T5/841/WM/ECO 51 5000 4000 85 30000 G5
71631 F54T5/865/WM/ECO 51 4750 6500 85 30000 G5
62020 F54T5/47W/830ECO 47 4800 3000 85 30000 G5
62022 F54T5/47W/841ECO 47 4800 4000 85 30000 G5
62024 F54T5/47W/865ECO 47 4531 6500 85 30000 G5
T8 HALO PHOSPHATE ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
73336 F18T8/DL 18 900 6500 76 10000 G13
73338 F36T8/DL 36 2350 6500 76 10000 G13
HPS LUCALOX XO ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
45697 LU 70/90/XO/D/E27 elliptical 70 6000 2100 25 33000 E27
93375 LU 70/XO/T/E27 tubular 70 6600 2100 25 33000 E27
93379 LU 100/XO/D/E40-elliptical 100 10200 2100 25 35000 E40
93376 LU 100/XO/T/E40-tubular 100 10700 2100 25 35000 E40
93380 LU 150/XO/D/E40-elliptical 150 16900 2100 25 35000 E40
93377 LU 150/XO/T/E40-tubular 150 17500 2100 25 35000 E40
93381 LU 250/XO/D/E40-elliptical 250 31200 2100 25 32000 E40
93378 LU 250/XO/T/E40-tubular 250 33000 2100 25 32000 E40
93296 LU 400/XO/D/E40-elliptical 400 54000 2100 25 32000 E40
93269 LU 400/XO/T/E40-tubular 400 90000 2100 25 32000 E40
HPS LUCALOX HO ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
67489E LU70/90/HO/T/E27 70 6500 2000 21 28000 E27
67490E LU100/100/HO/T/E40 100 10400 2000 21 28000 E40
78659E LU150/100/HO/T/E40 150 17400 2000 19 28000 E40
78660E LU250/HO/T/E40 250 32500 2000 19 28000 E40
78661E LU400/HO/T/E40 400 56200 2000 19 28000 E40
78663E LU600/HO/T/E40 600 83000 2000 19 28000 E40
149
Lamp Data
HPS LUCALOX STANDARD
ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
71052IN LU70/90/D/E27 70 5700 2000 21 12000 E27
71053IN LU70/90/D/I/E27 70 4930 2000 21 12000 E27
71051IN LU70/90/T/E27 70 6100 2000 21 12000 E27
74042IN LU150/100/D/E40 150 14500 2000 21 24000 E40
74041IN LU150/100/T/E40 150 15000 2000 21 24000 E40
74044IN LU250/D/E40 250 26000 2000 21 24000 E40
74043IN LU250/T/E40 250 28000 2000 21 24000 E40
74046IN LU400/D/E40 400 48000 2000 21 24000 E40
74045IN LU400/T/E40 400 48000 2000 21 24000 E40
CMH - ULTRA RANGE ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
76124CMH35/MR16/V60/UVC/930/
GX10/FL ULTRA35 2200 3000 90 16500 GX10
76125CMH35/MR16/V60/UVC/930/
GX10/WFL ULTRA35 2200 3000 90 16500 GX10
96751CMH70/TC/UVC/U/930/G8.5
ULTRA70 6200 3000 88 18000 G8.5
96752 CMH70/T/UVC/U/930/G12 ULTRA 70 6400 3000 87 18000 G12
63595CMH70/TC/UVC/U/930/G8.5
ULTRA WHITE70 6700 3000 88 18000 G8.5
63596CMH70/T/UVC/U/930/G12 ULTRA
WHITE70 6600 3000 88 18000 G12
CMH - T SINGLE ENDED
ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
42708 CMH 20/T/UVC/U/830/G12plus 20 1650 3000 80+ 12000 G12
92141 CMH 35/T/UVC/U/942/G12 35 3200 4200 85+ 18000 G12
43272 CMH 35/T/UVC/U/830/G12plus 35 3400 3000 80+ 16500 G12
20013 CMH 70/T/UVC/U/942/G12 70 6200 3000 80+ 15000 G12
20005 CMH 70/T/UVC/U/830/G12 70 6300 4200 90+ 15000 G12
20014 CMH 150W/T/UVC/U/942/G12 150 13000 3000 90+ 12000 G12
20012 CMH 150W/T/UVC/U/830/G12 150 14000 4200 80+ 12000 G12
CMH - T MINI SINGLE ENDED
ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
39858 CMH20/TC/UVC/830/G8.5 PLUS 20 1650 3000 85 12000 G8.5
43273CMH35/TC/UVC/U/830/G8.5
PLUS 1/1235 3400 3000 85 16500 G8.5
26348 CMH35/TC/UVC/U/942/G8.5 35 3200 4200 85 18000 G8.5
43274CMH70/TC/UVC/U/830/G8.5
PLUS 1/1270 6450 3000 85 15000 G8.5
26349 CMH70/TC/UVC/U/942/G8.5 70 6200 4200 85 15000 G8.5
CMH - T DOUBLE ENDED
ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
43278 CMH35/TD/UVC/830/RX7s 35 3400 3000 80+ 15000 RX7S
38698 CMH70/TD/UVC/942/RX7s 70 6200 4200 90+ 15000 RX7S
36910 CMH70/TD/UVC/830/RX7s 70 7000 3000 80+ 15000 RX7S
38692 CMH150/TD/UVC/942/RX7s - 24 150 12500 4200 90+ 15000 RX7S-24
36912 CMH150/TD/UVC/830/RX7s - 24 150 14500 3000 80+ 15000 RX7S-24
150
CMH - PAR ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
21682CMH70/PAR30/UVC/830/E27/
FL40 70 4700 3000 80+ 13000 E27
21683CMH70/PAR30/UVC/830/E27/
SP15 70 4700 3000 80+ 13000 E27
21689CMH35/PAR30/UVC/942/E27/
SP10 35 2400 3000 80+ 10000 E27
21690CMH35/PAR30/UVC/830/E27/
FL25 35 2400 3000 80+ 10000 E27
CMH ELLIPTICAL DIFFUSE
ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
43282 CMH70/UVC/O/U/940/E27/D 70 5300 4000 90+ 15000 E27
43286 CMH150/UVC/O/U/940/E27/D 150 12300 4000 90+ 15000 E27
10591 CMH250/E/UVC/U/830/E40/D 250 23500 3000 80+ 24000 E40
13087 CMH400/E/UVC/U/830/E40 400 39000 3000/3600 80+ 20000 E40
CMH TUBULAR ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
38752 CMH70/TT/UVC/830/E27 70 6400 3000 80+ 20000 E27
21514 CMH150/UVC/T/U/842/E40 150 14500 4000 89 15000 E40
10589 CMH250/TT/UVC/U/830/E40 250 25000 3000 80+ 24000 E40
13067 CMH400/TT/UVC/U/830/E40 400 41000 3000/3600 80+ 20000 E40
CMH TUBULAR STREETWISE
ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
77401CMH70/TT/UVC/730/E27
STREETWISE70 7640/7300 3000 70+ 24000 E27
77402CMH150/TT/UVC/730/E40
STREETWISE150 16200/16300 3000 68+ 24000 E40
ARC SINGLE ENDED ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
65117IN ARC70/E/U/740/E27 70 4700 4000 65 8000 E27
65118IN ARC150/E/U/740/E27 150 11500 4000 65 8000 E29
65115IN ARC150/T/U/740/E40 150 11500 4000 65 5000 E40
65116IN ARC250/T/U/740/E40 250 18000 4000 65 8000 E40
65119IN ARC400/T/U/740/E40 400 34000 4000 63 8000 E40
ARC DOUBLE ENDED ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
71170E ARC70/UVC/TD/760/Rx7s 70 5000 6000 67 9000 RX7S
89137IN ARC150/UVC/TD/730/Rx7s-24 150 13000 3000 70 9000 RX7S-24
89138IN ARC150/UVC/TD/742/Rx7s-2 150 13000 4200 70 9000 RX7S-24
71175E ARC 150/UVC/TD/760/Rx7s- 24 150 10500 6000 88 9000 RX7S-24
KRC SINGLE ENDED ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
65120IN KRC250/T/U/740/E40 250 22000 4000 65 8000 E40
65121IN KRC250/D/U/740/E40 250 19000 4000 64 8000 E40
65122IN KRC400/T/U/740/E40 400 39000 4000 63 8000 E40
65123IN KRC400/D/U/740/E40 400 36000 4000 63 8000 E40
Lamp Data
151
HPMV AND MLL ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
76985IN HPMV80W/E27 80 3800 * 45 20000 E27
74781IN HPMV125W/E27 125 6300 * 45 20000 E27
74782IN HPMV250W/E40 250 13000 * 45 20000 E40
76986IN HPMV400W/E27 400 22500 * 40 20000 E40
BLENDED LAMP ELECTRICAL AND ORDERING INFORMATION
Code Description Wattage Lumen Output CCT CRI Average Life Cap
74875IN ML160W/230-240V/E27 160 3100 * 52 8000 E27
76388IN ML160W/230-240V/B22 160 3100 * 52 8000 B22
Lamp Data
152
ANNEXURE-I
First number:Degree of protection against accidental contact/contact with external elements
Second number: Degrees of protection against ingress of moisture
First number
Description Explanation Second number
Description Explanation
0 Non-protected Not -protected 0 Non-protected Not -protected against Moisture
1 Hand-protected Protected against solid Objects exceeding 50mm in diameter
1 Drip-proof Water drip falling vertically shallagainst vertical have no harmful effectwater drops
2 Finger-protected Protected against finger contact with live parts; against solid objects exceeding 12 mm in Diameter
2 Drip-proof Water drip shall have no harmfulwhen tilted at effectangles up to 15
3 TooI-protected Protected against contact With live parts by tools, wire or similar objects over 2.5 mm thick; protection against penetration of solid objects exceeding 2.5 mm in diameter
3 Rain-/spray- Water falling at an angle of up toproof 60 shall have no harmful effect
4 Wire-protected Protected against contact with live parts by tools, Wire or similar objects over 1 mm thick; protection against penetration of solid objects exceeding 1 mm in diameter
4 Splash-proof Splashing water from any direction shall have no harmful effect
5 Dust Complete protection accumulation against contact with live protected parts and against harmful accumulation of dust; some dust may penetrate but not to the extent that operation is impaired
5 Jet-proof Water projected by a nozzle from any direction shall have no harmful effect. (Nozzle diameter 6.3 mm, pressure 30 kPa)
6 Dust Complete protection penetration against contact with live protected parts and against penetration of dust
6 Jet-proof Water projected by a nozzle from any direction shall have no harmful effect. (Nozzle diameter 12.5 mm, pressure 100 kPa)
7 Watertight watertight; temporary immersion In water under specified conditions of pressure and time possible without ingress of water in harmful quantities
8 Pressure pressure watertight; continuouswatertight submersion in water under Specified conditions of pressure and time without ingress of water in harmful quantities
153
ANNEXURE-IIAs per IS 3646 PART 1 - 1992
Recommended Illumination Level (Illuminance)
Types of Interior of ActivityAverage
Illuminance in Lux
1.1 AGRICULTURE AND HORTICULTURE 1.1 Inspection of Farm Produce Where 500 Colour is important Other Important Tasks 3001.2 Farm Workshops 1.2.1 General 1001.2.2 Workbench or machine 3001.3 Milk premises 1001.4 Sick Animal Pets, Calf Nurseries 501.5 Other Firm and Horticulture Building 302. COAL MINING (SURFACE BUILDING) 2.1 Coal Preparation Plant 2.1.1 Walkways, Floors under conveyors 502.1.2 Wagon loading, bunkers 502.1.3 Elevators, chute transfer pits, wash box area 1002.1.4 Drum filters, screen, rotating shafts 1502.1.5 Picking belts 2002.2 Lamp Rooms 2.2.1 Repair section 3002.2.2 Other areas 1502.3 Weight Cabins, Fan Houses 1502.4 Winding houses 1503. ELECTRICITY GENERATION TRANSMISSION AND DISTRIBUTION 3.1 General Plant 3.1.1 Turbine houses (operating floor) 2003.1.2 Boiler and turbine house basements 1003.1.3 Boiler house, platforms, areas around burners 1003.1.4 Switch rooms, meter rooms, oil plant rooms, 150 HV substations (indoor) 3.1.5 Control Room 3003.1.6 Relay and telecommunication rooms 3003.1.7 Diesel generator & compressor rooms 1503.1.8 Pump houses, water treatment plant houses 1503.1.9 Battery rooms, charges, rectifiers 1003.1.10 Precipitator chambers, platforms, etc 1003.1.11 Cable tunnels & basements, circulating water 50 culverts & screen chambers 1.1 Coal Plant 1.1.1 Conveyors, gantries, junction towers, 100 unloading hoppers, ash handling plants, setting pits, dust hoppers outlets 1.1.2 Other areas where operators may be attendance 1501.2 Nuclear Plants Gas circulation bays, reactor area, boiler platform, reactor charges and discharge face 1502. METAL MANUFACTURE 2.1 Iron Making 2.1.1 Sinter Plant : Plant Floor 200 Mixer drum, fan house, screen houses coolers, 150 transfer stations 2.1.2 Furnaces, cupola : General 150 Control Platforms 300 Conveyor galleries, walkways 502.2 Steel Making 2.2.1 Electric Melting Shops 200
Types of Interior of ActivityAverage
Illuminance in Lux
2.2.2 Basic Oxygen Steel Making Plants 2.2.2.1 General 1502.2.2.2 Convertor Floor, teeming bay 2002.2.2.3 Control Platforms 3002.2.2.4 Scrap bays 1502.3 Metal forming and treatment 2.3.1 Ingot stripping, soaking pits, annealing and picking and cleaning bays, roughing mills, cold mills, finishing mills, tinning and galvanizing lines, cut up and rewind lines 2002.3.2 General 1502.3.3 Control Platforms 3002.3.4 Wire mills, product finishing, steel Inspection 300 and treatment 2.3.5 Plate/Strip inspection 5002.3.6 Inspection of tin plate, stainless steel, etc --2.4 Foundries 2.4.1 Automatic plant 2.4.1.1 Without manual operation 502.4.1.2 With occasional manual operation 1502.4.1.3 With continues manual operation 2002.4.1.4 Control room 3002.4.1.5 Control Platform 3001.1.1 Non-automatic Plants 1.1.1.1 Charging Floor, Pouring, Shaking Out, 300 Cleaning, Grinding Fetting 1.1.1.2 Rough moulding, rough core making 3001.1.1.3 Fine moulding, fine core making 5001.1.1.4 Inspection 5001.2 Forges (Severe vibration is likely to occur) 1.2.1 General 3001.2.2 Inspection 5002. CERAMICS 2.1 Concrete Products Mixing, Casting, Cleaning 2002.2 Potteries 2.2.1 Grinding, moulding, pressing, cleaning, trimming, glazing, firing 300 2.2.2 Enamelling, colouring 7502.3 Glass Works 2.3.1 Furnace rooms, bending, annealing 1502.3.2 Mixing rooms, forming, cutting, grinding polishing, toughening 300 2.3.3 Beveling, decorative cutting, etching, silvering 5002.3.4 Inspection 5003. CHEMICALS 3.1 Petroleum, Chemical and Petrochemical Works 3.1.1 Exterior walkways, Platforms, stairs & ladders 53.1.2 Exterior pump and value areas 1003.1.3 Pump and compressor houses 1503.1.4 Process plant with remote control 503.1.5 Process plant requiring occasional manual 100 intervention 3.1.6 Permanently occupied work stations in process plant 2003.1.7 Control rooms for process plant 3003.2 Pharmaceutical manufacturer and fine chemicals manufacturer
154
ANNEXURE-IIAs per IS 3646 PART 1 - 1992
Recommended Illumination Level (Illuminance)
Types of Interior of ActivityAverage
Illuminance in Lux
3.2.1 Pharmaceutical Manufacturer Grinding, granulating, mixing, drying, Tabulating, 500 sterilizing, washing, preparation of solutions, filling, capping wrapping, hardening 3.2.2 Fine chemical manufacture 3.2.2.1 Exterior walkways, platform, stairs and ladders 503.2.2.2 Process Plant 1003.2.2.3 Fine chemical finishing 5003.2.2.4 Inspection 5003.3 Soap Manufacture 3.3.1 General Area 3003.3.2 Automatic Processes 2003.3.3 Control panels 3001.1 Paint Works 1.1.1 General 3001.1.2 Automatic Process 2001.1.3 Control Panels 3001.1.4 Special Batch Mixing 7501.1.5 Colour Matching 10002. MECHANICAL ENGINEERING 2.1 Structural Steel Fabrication 2.1.1 General 3002.1.2 Marking off 5002.2 Sheet Metal Works 2.2.1 Pressing, punching, shearing, stamping, spinning, folding 5002.2.2 Bench work, scribing, inspection 7502.3 Machine and Tool Shops 2.3.1 Rough bench and machine work 3002.3.2 Medium bench and machine work 5002.3.3 Fine bench and machine work 10002.3.4 Gauge rooms 10002.4 Die Sinking Shops 11 General 50012 Fine Works 100013 Welding and Soldering Shops 14 Gas and are welding, rough spot welding 30015 Medium soldering, brazing, spot welding 50016 Fine Soldering, fine spot welding 100017 Assembly Shops 18 Rough work for example, frame and heavy machine assembly 300 19 Medium work, for example, office machinery 500 assembly 20 Fine work, for example, office machinery assembly 75021 Very fine work, for example, instrument 100022 Minute work for example, watch making 150023 Inspection and Testing Shops 24 Coarse Work, for example, using go/on go gauge, inspection of large sub-assemblies 500 25 Medium work, for example, inspection of painted surfaces 750 26 Fine work, for example, using calibrated scales, 1000 inspection of precision mechanisms 27 Very fine work, for example, inspection of 1500 desirable 11 Minute work, for example, inspection of very small instruments 2000
Types of Interior of ActivityAverage
Illuminance in Lux
12 Points Shops and spray Booths 13 Dipping, rough spraying 30014 Preparation, ordinary painting, spraying & finishing 50015 Fine painting, spraying and finishing 75016 Inspection, retouching and matching 100017 Plating Shops 18 Vats and baths 30019 Buffing, polishing burnishing 50020 Final buffing and polishing 75021 Inspection --1. ELECTRICAL AND ELECTRONIC ENGG. 1.1 Electrical Equipment Manufacture 1.1.1 Manufacture of cables & insulated wires, winding, varnishing & immersion of coils, assembly of large 300 machines, simple assembly work 1.1.2 Medium assembly, for example 5001.1.3 Assembly of precision components, for example, telecommunication equipment, adjustment, inspection and calibration 10001.1.4 Assembly of high precision parts 15001.2 Electronic Equipment Manufacture 1.2.1 Printed Circuit Board 1.2.1.1 Silk Screening 5001.2.1.2 Hand insertion of components, soldering 7501.2.1.3 Inspection 10001.2.1.4 Assembly of wiring harness, clearing harness, 750 testing and calibration 1.2.1.5 Chassis assembly 10001.2.2 Inspection and testing : 1.2.2.1 Soak test 2001.2.2.2 Safety and functional tests 3002. FOOD, DRINKS AND TOBACCO 2.1 Slaughter Houses 2.1 .1 General 3002.1.2 Inspection 5002.2 Canning, preserving and freezing 1.1.1 Grading and sorting of raw materials 750 required, if colour judgement is required 1.1.2 Preparation 5001.1.3 Canned and bottled goods 1.1.3.1 Retorts 3001.1.3.2 Automatic process 2001.1.3.3 Labeling and packaging 3001.1.4 Frozen and Labeling 1.1.4.1 Process area 3001.1.4.2 Packaging and storage 3001.2 Bottling, Brewing and Distilling 1.2.1 Keg washing and handling, bottle washing 2001.2.2 Keg inspection 3001.2.3 Bottle Inspection --1.2.4 Process areas 3001.2.5 Bottle filling 7501.3 Edible Oils and Fats Processing 1.3.1 Refining and Blending 3001.3.2 Production 5001.4 Mills-milling, Filtering and Packing 3001.5 Bakeries
155
ANNEXURE-IIAs per IS 3646 PART 1 - 1992
Recommended Illumination Level (Illuminance)
Types of Interior of ActivityAverage
Illuminance in Lux
1.5.1 General 3001.5.2 Hand decorating, icing 5001.6 Chocolate and Confectionery Manufacturer 1.6.1 General 3001.6.2 Automatic Processes 2001.6.3 Hand decoration, inspection, wrapping and packing 5001.7 Tobacco Processing 1.7.1 Material preparation, making and packing 5001.7.2 Hand processes 7502. TEXTILES 2.1 Fibre preparation 2.1.1 Bale breaking, washing 3002.1.2 Stock dyeing, tinting 3002.2 yam Manufacture 2.2.1 Spinning, roving, winding, etc 5002.2.2 Healding (drawing in) 10002.3 Fabric Production 2.3.1 Knitting 5002.3.2 Weaving 2.3.2.1 Jute and hemp 3002.3.2.2 Heavy woollens 5002.3.2.3 Medium worsteds, fine woollens, cottons 5002.3.2.4 Fine worsteds, fine linens synthetics 10002.3.2.5 Mending 15002.3.2.6 Inspection 15001.1 Fabric Finishing 1.1.1 Dyeing 3001.1.2 Calendering, Chemical treatment, etc. 5001.1.3 Inspection 1.1.3.1 ‘Grey’ Cloth 10001.1.3.2 Final 15001.2 Carpet Manufacturer 1.2.1 Winding, beaming 3001.2.2 Setting Pattern, tufting, cropping, trimming, fringing, 500 latexing and latex drying 1.2.3 Designing, weaving, mending 7501.2.4 Inspection 1.2.4.1 General 10001.2.4.2 Piece Dyeing 7502. LEATHER INDUSTRY2.1 Leather Manufacture 11 Cleaning, tanning and stretching, vats, cutting, fleshing, stuffing 30012 Finishing, scarfing 50013 Leather Working 14 General 30015 Pressing, glazing 50016 Cutting, splitting, scarfing, sewing 75017 Grinding, matching 3. CLOTHING AND FOOTWEAR 3.1 Clothing Manufacture 3.1.1 Preparation of cloth 3003.1.2 Cutting 7503.1.3 Matching 7503.1.4 Sewing 10003.1.5 Pressing 5003.1.6 Inspection 1500
Types of Interior of ActivityAverage
Illuminance in Lux
3.1.7 Hand Tailoring 15003.2 Hosiery and knitwear manufacture 3.2.1 Flat bed Knitting machines 5003.2.2 Circular knitting machines 7503.2.3 Lock stitch and Over locking machine 10003.2.4 Linking or running on 10003.2.5 Mending, hand finishing 15003.2.6 Inspection 15003.3 Glove Manufacture 3.3.1 Sorting and grading 7503.3.2 Pressing, Knitting, cutting 5003.3.3 Sewing 7503.3.4 Inspection 15001.1 Hat manufacture 1.1.1 Stiffening, braiding, refining, forming, sizing, pounding, ironing 3001.1.2 Cleaning, flanging, finishing 5001.1.3 Sewing 7501.1.4 Inspection 15001.2 Boot and shoe Manufacture 1.2.1 Leather and Synthetics 1.2.2 Soring and grading 10001.2.3 Clicking, closing 10001.2.4 Preparatory operations 10001.2.5 Cutting tables and pressure 15001.2.6 Bottom stock preparation, lasting, 10001.2.7 Rubber 1.2.7.1 Washing, compounding, coating, drying, varnishing, vulcanizing 300 1.2.7.2 Lining, making and finishing 5002. TIMBER AND FURNITURE 2.1 Sawmills 2.1.1 General 2002.1.2 Head saw 5002.1.3 Grading 7502.2 Woodwork Shops 2.2.1 Rough sawing, bench work 3002.2.2 Sizing, planning, sanding, medium machining and bench work 500 2.2.3 Fine bench & machine work, fin sanding, finishing. 7502.3 Furniture manufacture 2.3.1 Raw material stores 1002.3.2 Finished goods stores 1502.3.3 Wood matching and assembly, rough sawing, cutting 3002.3.4 Machining, sanding and assembly, finishing 5002.3.5 Tool rooms 5002.3.6 Spray Booths 2.3.6.1 Colour finishing 5002.3.6.2 Clear finishing 3002.3.7 Cabinet making 2.3.7.1 Veneer sorting and grading 10002.3.7.2 Marquetry, pressing, patching and fitting 5002.3.7.3 Final inspection 7501. COMMERCE1.1 Offices 1.1.1 General Offices 5001.1.2 Deep Plan General Offices 750
156
ANNEXURE-IIAs per IS 3646 PART 1 - 1992
Recommended Illumination Level (Illuminance)
Types of Interior of ActivityAverage
Illuminance in Lux
1.1.3 Computer Work Station 5001.1.4 Conference Rooms, Executive Offices 5001.1.5 Computer and Data Preparation Rooms 5001.1.6 Filling Rooms 3001.2 Drawing Offices 1.2.1 General 5001.2.2 Drawing Boards 7501.2.3 Computer Aided Design and Drafting --1.2.4 Print Rooms 3001.3 Banks and Building Societies 1.3.1 Counter, Office Area 5001.3.2 Public Area 3002. SERVICES 2.1 Garages 2.1.1 Interior parking areas 302.1.2 General repairs, servicing, washing, polishing 3002.1.3 Workbench 5002.1.4 Spray Booths 5002.1.5 External apron 2.1.5.1 General 502.1.5.2 Pump Area (retail sales) 3002.2 Appliance servicing 2.2.1 Workshop 2.2.1.1 General 3002.2.1.2 Workbench 5002.2.1.3 Counter 3002.2.1.4 Stores 3002.3 Laundries 2.3.1 Commercial laundries 2.3.2 Receiving, sorting, washing, drying, ironing, dispatch, dry-cleaning, bulk machine work 3002.3.3 Head ironing, pressing, mending, spotting inspection 5002.3.4 Launderettes 3002.4 Sewage Treatment Works 2.4.1 Walkways 502.4.2 Process areas 1001. RETAILING 1.1 Small Shops with Counters 5001.2 Small Self Service Shops with island Displays 5001.3 Super-Markets, Hyper-Markets 1.3.1 General 5001.3.2 Checkout 5001.3.3 Showroom for large objects, for example, 500 cars, furniture 1.3.4 Shopping precincts and arcades 1502. PLACES OF PUBLIC ASSEMBLY 2.1 Public Rooms, Village Halls, Worship Halls 3002.2 Concert Halls, Cinemas and Theatres 2.2.1 Foyer 2002.2.2 Booking Office 3002.2.3 Auditorium 1002.2.4 Dressing Rooms 3002.2.5 Projection Rooms 1502.3 Churches 2.3.1 Body of Church 1502.3.2 Pulpit, Lectern 3002.3.3 Choir Stalls 3002.3.4 Alter, communion table, Cancel 150
Types of Interior of ActivityAverage
Illuminance in Lux
2.3.5 Vestries 1502.3.6 Organ 3002.4 Hospitals 2.4.1 Anaesthetic Rooms 2.4.1.1 General 3002.4.1.2 Local 10002.4.2 Consulting Area 2.4.2.1 General 3002.4.2.2 Examination 10002.4.3 Corridors 2.4.3.1 General 1502.4.4 Ward Corridors 2.4.4.1 Day, screened from bays 2002.4.4.2 Day, open to natural light 200 1.1.1 Cubicles 1.1.1.1 General 3001.1.1.2 Treatment 10001.1.2 Examination 1.1.2.1 General 3001.1.2.2 Local inspection 10001.1.3 Intensive therapy 1.1.3.1 Bad head 501.1.3.2 Circulation between bed ends 1001.1.3.3 Observation 3001.1.3.4 Local observation 10001.1.3.5 Staff base (day) 3001.1.3.6 Staff base (night) 301.1.4 Laboratories 1.1.4.1 General 3001.1.4.2 Examination 5001.1.5 Nurses stations 1.1.5.1 Morning / day / evening 3001.1.5.2 Night desks 301.1.5.3 Night, medical trolleys 1001.1.6 Operating theatres 1.1.6.1 General 5001.1.6.2 Local 10001.1.7 Pathology departments 1.1.7.1 General 3001.1.7.2 Examination 5001.1.7.3 Pharmacies 3001.1.7.4 Reception / inquiry 3001.1.7.5 Recovery rooms 3001.1.8 Ward-circulation 1.1.8.1 Day 1.1.8.2 Morning / Evening 1001.1.8.3 Night 3-51.1.9 Ward-bed head 1.1.9.1 Morning / Evening 30-501.1.9.2 Reading 1501.1.10 Night 1.1.10.1 Adult 0.1-11.1.10.2 Pediatric 11.1.10.3 Psychiatric 1-51.1.10.4 Watch 51.1.11 X-Ray Areas 1.1.11.1 General 2001.1.11.2 Diagnostic 2001.1.11.3 Operative 300
157
ANNEXURE-IIAs per IS 3646 PART 1 - 1992
Recommended Illumination Level (Illuminance)
Types of Interior of ActivityAverage
Illuminance in Lux
1.1.11.4 Process dark room 501.1.12 Surgeries 1.1.12.1 General 3001.1.12.2 Waiting Rooms 1501.1.13 Dental Surgeries 1.1.13.1 Chair Special Lighting1.1.13.2 Laboratories 5001.1.1 Consulting rooms 1.1.1.1 General 3001.1.1.2 Desk 5001.1.1.3 Examination Couch 5001.1.1.4 Ophthalmic wall & near-vision charts 5001.2 Hotels 1.2.1 Entrance halls 1001.2.2 Reception, cashier’s and porter’s desks 3001.2.3 Bars, coffee base, dining rooms, grill rooms, 50-200 restaurants, lounges 1.2.4 Cloak rooms, baggage rooms 1001.2.5 Bed room 501.2.6 Bathroom 1001.2.7 Food preparation and stores, cellars, lifts and -- corridors 1.3 Libraries 1.3.1 Lending library 1.3.1.1 General 3001.3.1.2 Counters 5001.3.1.3 Bookshelves 1501.3.1.4 Reading rooms 3001.3.1.5 Reading tables 3001.3.2 Catalogues 1.3.2.1 Card 1501.3.2.2 Microfiche / Visual display units 1501.3.3 Reference libraries 1.3.3.1 General 3001.3.3.2 Counters 5001.3.3.3 Bookshelves 1501.3.3.4 Study tables, carrels 5001.3.3.5 Map room 3001.3.4 Display and exhibition areas 1.3.4.1 Exhibits insensitive to light 3001.1.1 Library workrooms 1.1.1.1 Book repair and binding 5001.1.1.2 Catalogue and sorting 5001.1.1.3 Remote book stores 1501.2 Museums and Art Galleries 1.2.1 Exhibits insensitive to light 3001.2.2 Light sensitive exhibits, for example, oil and temper paints, undyed leather, bone, ivory, wood, etc. 150 1.2.3 Extremely light sensitive exhibits, for example 50 textiles, water colour, prints and drawings, skins, 1.2.4 Conservation studies and workshops 5001.3 Sports Facilities 1.3.1 Multi-purpose sports halls 300-7502. EDUCATION 2.1 Assembly Hall 2.1.1 General 3002.1.2 Platform and stage --2.2 Teaching Spaces
Types of Interior of ActivityAverage
Illuminance in Lux
2.2.1 General 3002.3 Lecture Theatres 2.3.1 General 3002.3.2 Demonstration benches 5002.4 Seminar Rooms 5002.5 Art Rooms 5002.6 Needlework Rooms 5002.7 Laboratories 5002.8 Libraries 3002.9 Music rooms 3002.10 Sport Halls 3002.11 Workshops 3003. TRANSPORT 3.1 Airports 3.1.1 Ticket counters, checking, desks and 500 information desks 1.1.1 Departure lounges, other waiting areas 2001.1.2 Baggage reclaim 2001.1.3 Baggage handing 1001.1.4 Customers and immigration halls 5001.1.5 Concourse 2001.2 Railway Stations 1.2.1 Ticket Office 5001.2.2 Information Office 5001.2.3 Parcels office, left 1.2.4 Luggage Office 1.2.4.1 General 1001.2.4.2 Counter 2001.2.5 Waiting Rooms 2001.2.6 Concourse 2001.2.7 Time Table 2001.2.8 Ticket Barriers 2001.2.9 Platforms (covered) 501.2.10 Platforms (open) 201.3 Coach stations 1.3.1 Ticket Offices 5001.3.2 Information Offices 5001.3.3 Left luggage office 1.3.3.1 General 1001.3.3.2 Counter 2001.3.4 Waiting Rooms 2001.3.5 Concourse 2001.3.6 Time Table 2001.3.7 Loading Areas 1502. GENERAL BUILDING AREAS 2.1 Entrance 2.1 Entrance Halls, Lobbies, Waiting Rooms 2002.1.1 Inquiry desks 5002.1.3 Gate houses 2002.2 Circulation Areas 2.2.1 Lifts 2.2.2 Corridors, Passageway, Stairs 1001.1 Upholstery Manufacture 1.1.1 Cloth inspection 15001.1.2 Filling, covering 5001.1.3 Slipping, cutting, sewing 7501.1.4 Mattress making 1.1.5 Assembly 5001.1.6 Tape edging 1000
158
ANNEXURE-IIAs per IS 3646 PART 1 - 1992
Recommended Illumination Level (Illuminance)
Types of Interior of ActivityAverage
Illuminance in Lux
2. PAPER AND PRINTING 2.1 Paper Mills 2.1.1 Pulp mills, preparation plants 3002.1.2 Paper and board making 2.1.2.1 General 3002.1.2.2 Automatic process 2002.1.2.3 Inspection, sorting 5002.1.3 Paper converting process 2.1.3.1 General 3002.1.3.2 Associated Printed 5002.2 Printing Works 2.2.1 Type foundries 2.2.1.1 Matrix making, dressing type, hand and machine coating 300 2.2.1.2 Front assembly, sorting 7502.2.2 Composing Rooms 2.2.2.1 Hand composing, imposition and distribution 7502.2.2.2 Hot metal keyboard 7502.2.2.3 Hot metal casting 3002.2.2.4 Photo composing keyboard or setters 5002.2.2.5 Paste up 7502.2.2.6 Illuminated tables - general lighting 3002.2.2.7 Proof presses 5002.2.2.8 Proof reading 7502.2.3 Graphic Reproduction 2.2.3.1 General 5002.2.3.2 Precision proofing, retouching, etching 10002.2.3.3 Colour reproduction and inspection 10002.2.4 Printing Machine Room 2.2.4.1 Presses 5002.2.4.2 Pre-make ready 5002.2.4.3 Printing sheet inspection 10002.2.5 Binding 2.2.5.1 Folding, pasting, punching and stitching 5002.2.5.2 Cutting, assembling, embossing 7503. PLASTIC AND RUBBER 3.1 Plastic Product 3.2 Automatic plant 3.1.1.1 Without manual control 501.1.1.1 With continuous manual control 3001.1.1.2 Control rooms 3001.1.1.3 Control platforms 3001.1.2 Non-automatic plant 1.1.2.1 Mixing, calendering, extrusion, injection compression and blow moulding, sheet fabrication 3001.1.2.2 Trimming, cutting, polishing 5001.1.2.3 Printing, inspection 10001.2 Rubber Products 1.2.1 Stock preparation - plasticizing, milling 2001.2.2 Calendering, fabric preparation, stock-cutting 5001.2.3 Extruding, moulding 5001.2.4 Inspection 10002. DISTRIBUTION AND STORAGE 2.1 Work Stores 1502.1.1 Unpacking, sorting 2002.1.2 Large item storage 1002.1.3 Small item rack storage 3002.1.4 Issue counter, records, store man’s desk 500
Types of Interior of ActivityAverage
Illuminance in Lux
2.2 Warehouses and Bulk Stores 2.2.1 Storage of goods where identification requires only limited preparation of detail 1002.2.2 Storage of goods where identification requires 150 perception of detail 2.2.3 Automatic high bay rack stores 2.2.3.1 Gangway 202.2.3.2 Control station 2002.2.3.3 Packing and dispatch 3002.2.3.4 Loading bays 1502.3 Cold Stores 2.3.1 General 3002.3.2 Breakdown, makeup and dispatch 3002.3.3 Loading bays 1501.1. Medical and First aid Centres 1.1.1 Consulting Rooms, Treatment Rooms 5001.1.2 Rest Rooms 1501.1.3 Medical Stores 1501.2 Staff Rooms 1.2.1 Changing, Locker and Cleaners Rooms, Cloakrooms, lavatories 100 1.2.2 Rest Rooms 1501.3 Staff Restaurant 1.3.1 Canteens, Cafeterias, dining Rooms, mess Rooms 2001.3.2 Server, vegetable preparation, washing up area 3001.3.3 Food preparation and cooking 5001.3.4 Food stores, cellars 1501.4 Communications 1.4.1 Switchboard rooms 3001.4.2 Telephone apparatus room 1501.4.3 Telex room, post room 5001.4.4 Reprographic room 3001.5 Building Services 1.5.1 Boiler houses 1.5.1.1 General 1001.5.1.2 Boiler front 1501.5.1.3 Boiler control room 3001.5.1.4 Control rooms 3001.5.1.5 Mechanical plant room 1501.5.1.6 Electrical power supply and distribution rooms 1501.5.1.7 Store rooms 1001.6 Car Parks 1.6.1 Covered Car Parks 1.6.1.1 Floors 5-201.6.1.2 Ramps and Corners 301.6.1.3 Entrances and Exits 1001.6.1.4 Control Booths 2001.6.1.5 Outdoor Car Parks 5-20
ANNEXURE-IIIIndian Standards Catalogue
159
ANNEXURE-IIIIndian Standards Catalogue
Document Number Standard Title Status
Is 7569 ; 1987 Cast acrylic sheets for use in luminaries Active
IS 8030 : 1976 Specification for Luminaires for Hospitals Active
Is 10242 : Part 3 : Sec 6: 1986 Electrical installations in ships : Part 3 Equipment, Section 6 Luminaires and accessories
Active
IS 10322 : Part 2 : 1982 Specification for Luminaires - Part 2 : Constructional Requirements Active
IS 10322 :Part 3 :1984 Specification for Luminaires - Part 3 : Screw and Screw less Terminals Active
IS 10322 : Part 4 : 1984 Specification for Luminaires - Part 4 :Method of Tests Active
IS 10322 : Part 5 : Sec 1 : 2012 Luminaires :Part 5 Particular requirements, Sec 1 General purpose luminaires Active
IS 10322 : Part 5 : Sec 2 : 2012 Specification for Luminaires - Part 5 : Particular Requirements - Section 2 : Recessed Luminaires
Active
IS 10322 :Part 5 : Sec 4 : 1987 Luminaires : Part 5 Particular requirements, Section 4 Portable general purpose luminaires
Active
IS 13383 :Part 1 : 1992 Photometry of Luminaires - Method of Measurement - Part 1 : Luminaires for Use in Interior Lighting
Active
IS 13383 : Part 2 : 1992 Methods of photometry of luminaires : Part 2 Luminaires for road and street lighting Active
IS 13383 : Part 3 : 1992 Photometry of Luminaires - Methods of Measurement - Part 3 : Luminaires for Floodlighting
Active
160
ANNEXURE-IVBureau Of Indian Standards
Illumination Engineering And Luminaires Standards
Sl. No. IS No. TITLE ReaffirmedDate
Amd.
1 IS 10322 (Part 1/Sec 0 ):1982 IIEC 598-1(1979)
Luminaires : Part 1 General requirements 05 2000
2 IS 10322(Part 2/Sec 0): 1982 IIEC 598-1 (1979)
Luminaires : Part 2 Constructional requirements 05 2000
3 IS 10322(Part 3/Sec 0):1984 Luminaires : Part 3 Screw and screw less terminations (superseding IS : 6585)
05 2000
4 IS 10322(Part 4/Sec 0 ):1984 IIEC 598-1(1979)
Luminaires : Part 4 Methods of tests 05 2000
5 IS 10322(Part 5/Sec 1):1985 IIEC 60598-2-1(1979)
Luminaires : Part 5 Particular requirements, Section 1 General Purpose luminaries
05 2000 2
6 IS 10322(Part 5/Sec 2):1985 IIEC 60598-2-2(1979)
Luminaires: Part 5 Particular requirements, Section 2 Recessed luminaires
05 2000 1
7 IS 10322(Part 5/Sec 3):1987 IIEC 60598-2-3(1979)
Luminaires :Part 5 Particular requirements, Section 3 Luminaires for road and street lighting (superseding IS:2149)
05 2000 2
8 IS 10322(Part 5/Sec 4):1987 IIEC60598-2-4(1979)
Luminaires: Part 5 Particular requirements, Section 4 Portable general purpose luminaires
05 2000 1
9 IIEC 60598 -2-5 Luminaires : Part 5 Particular requirements, Section 5 Flood lights (superseding IS:1947)
05 2000 1
10 IS 10894 (Part 0/Sec 0):1984 Code of practice for lighting of educational institutions 05 2000
11 IS 10947(Part 0/Sec 0):1984 Code of practice for lighting for ports and harbours 005 2000
12 IS 11071(Part 1/Sec 0):1984 Inset type aerodrome lighting fitting: Part 1 General requirements and tests
05 2000
13 IS 11071(Part 2/Sec 0):1984 Inset type aerodrome lighting fitting: Part 2 Runway centre line lighting fittings
05 2000
14 IS 11071(Part 3/Sec 0): 1984 Inset type aerodrome lighting fittings: Part 3 Approach lighting fittings
05 2000
15 IS 11071 (Part 4/Sec 0):1984 Inset type aerodrome lighting fittings: Part 4 Touchdown zone lighting fittings
05 2000
16 IS 11116(Part 0/ Sec 0): 1984 Code of practice for lighting for airport aprons 05 2000
17 IS 11472(Part 1/Sec 0):1985 Artificial day light for the assessment of colours : Part 1 Illuminate for colour matching and colour appraisal
03 2003
18 IS 11472(Part 2/Sec 0): 1985 Artificial day light for the assessment of colours : Part 2 Viewing conditions for graphic arts industry
03 2003
19 IS 12290(Part 0/Sec 0):1987 Isolating transformers for airport lighting 03 2003
20 IS 12291(Part 0/Sec 0):1987 Constant current regulators for airport systems 03 2003
21 IS 12309(Part 1/Sec 0):1988 Code of practice for installation and maintenance of aerodrome lighting fittings : Part 1 Installation
03 2003
22 IS 12309(Part 2/Sec 0):1988 Code of practice for installation and maintenance of aerodrome lighting fittings : Part 2 Maintenance
03 2003
23 IS 13383(Part 1/Sec 0):1992 Methods of photometry of luminaires :Part 1 For use interior lighting
05 2000
24 IS 13383(Part 2/Sec 0):1992 Methods of photometry of luminaires : Part 2 For road and street lighting
10 2000
25 IS 13383 (Part 3/Sec 0):1992 Methods of photometry of luminaires :Part 3 For flood lighting 05 2000
26 IS 1777(Part 0/Sec 0):1978 Industrial luminaires with metal reflectors(first revision) 05 2000 1
27 IS 193(Part 1/Sec 0): 1978 IIEC 162 (1972)
General and safety requirements for luminaires: Part 1 Tubular fluorescent lamps (second revision)
03 2003
28 IS 1944 (Part 5/Sec 0):1981 Code of practice for lighting of public thoroughfare : Part 5 Lighting for grade separated junctions, bridges and elevated roads (Group D)
03 2003
29 IS 1944(Part 6/Sec 0):1981 Code of practice for lighting of public thoroughfare : Part 6 Lighting for towns and city centres and areas of civic importance (Group E)
03 2003
ANNEXURE-IVBureau Of Indian Standards
Illumination Engineering And Luminaires Standards
161
ANNEXURE-IVBureau Of Indian Standards
Illumination Engineering And Luminaires Standards
Sl. No. IS No. TITLE ReaffirmedDate
Amd.
30 IS 1944 (Part 7/Sec 0):1981 Code of practice for lighting of public thoroughfare : Part 7 Lighting for roads with special requirements (Group F)
03 2003
31 IS 1944 : 1970 Code of practice for lighting of public thoroughfare : Parts 1 and Part 2 For main and secondary roads (Group A and B) (first revision) (Parts 1 and 2 in one volume)
03 2003 2
32 IS 2206 (Part 1/Sec 0):1984 Flameproof electric lighting fittings: Part 1 Well-glass and bulkhead types (First revision)
05 2000 1
33 IS 2206(Part 2/Sec0):1976 Flameproof electric lighting fittings: Part 2 Fittings using glass tubes 03 2003 1
34 IS 2206 (part 3/Sec 0):1989 Flameproof electric lighting fittings: Part 3 Fittings using plastic tubes(Group 1 Only)
05 2000
35 IS 2206 (Part 4/Sec 0):1987 Flameproof electric lighting fittings: Part 4 Portable flameproof hand lamps
03 2003
36 IS 2672(Part 0/Sec 0):1966 Code of practice for library lighting 05 20003
37 IS 3287(Part 0/Sec 0):1965 Industrial lighting fittings with plastic reflectors 05 2000
38 IS 3528(Part 0/Sec 0):1966 Waterproof electric lighting fittings 05 2000
39 IS 3553(Part 0/Sec 0): 1966 Watertight electric lighting fittings 05 2000
40 IS 3646(Part 1/Sec 0): 1992 Code of practice for interior illumination : Part 1 General require-ments and recommendations for working interiors(first revision)
03 2003
41 IS 3646 (Part 2/Sec 0):1966 Code of practice for interior illumination : Part 2 Schedule of illumination and glare index
03 2003
42 IS 3646 (Part 3/Sec 0): 1968 Code of practice for interior illumination : Part 3 Calculation of coefficients of utilization by the BZ method
03 2003
43 IS 4012(Part 0/Sec 0):1967 Dust-proof electric lighting fittings 05 2000
44 IS 4013(Part 0/Sec 0):1967 Dust-tight electric lighting fittings 05 2000
45 IS 4347(Part 0/Sec 0):1967 Code of practice for hospital lighting 05 2000
46 IS 5077(Part 0/Sec 0):1969 Decorative lighting outfits 05 2000
47 IS 6665 (Part 0/Sec 0): 1972 Code of practice for industrial lighting 05 2000
48 IS 7537 (Part 0/Sec 0):1974 Road traffic signals 03 2003
49 IS 7569(Part 0/Sec 0):1987 Cast acrylic sheets for use in luminaires (first revision) 03 2003
50 iS 7678(Part 0/Sec 0):1975 Method of photometric testing of incandescent type luminaires for general lighting service
03 2003
51 IS 7785(Part1/Sec 0): 1975 Elevated type aerodrome lighting fittings :Part 1 General requirements
03 2003
52 IS 7785 (Part 2/Sec 0):1976 elevated type aerodrome lighting fittings: Part 2 Fixed focus high intensity bi-directional runway edge lighting fittings
03 2003
53 IS 7785 (Part 3/Sec 0):1976 Elevated type aerodrome lighting fittings:Part 3 Low intensity runway edge lighting fittings
03 2003
54 IS 7785(Part 4/Sec 1): 1981 Elevated type aerodrome lighting fittings: Part 4 Angle of approach lights, Section 1 Visual approach slope indicators
03 2003
55 IS 7785(Part 4/Sec 1): 1981 Elevated type aerodrome lighting fittings : Part 5 Approach lighting fittings, Section 1 High intensity elevated approach lighting fittings
03 2003
56 IS 7785(Part 6/Sec 1):1981 Elevated type aerodrome lighting fittings: Part 6 Taxiway lights, Section 1 Low intensity omnidirectional elevated taxiway lighting fittings
03 2003
57 IS 8030(Part 0/Sec 0):12976 IIEC 162(1972)
Luminaires for hospitals 03 2003
58 IS 8224 (Part 0/Sec 0): 1976 Electric lighting fittings for division 2 areas 03 2003
59 IS 9583 (Part 0/Sec 0): 1981 IIEC 598-2-22(1980)
Emergency lighting units 03 2003
1 IS 9583 (Part 0/Sec 0): 191981 IIEC 598-2-22(1980)
162
ANNEXURE-VBureau Of Indian Standards
Electric Lamps And Their Auxiliaries
Sl. No. IS No. TITLE ReaffirmedDate Amd.1 IS 10276(Part 1/Sec0) : 1982
IIEC 60238 (1975)Edison screw lampholders : Part 1 Requirements and tests
06 2003
2 IS 10276(Part 1/Sec0) : 1982 IIEC 60238 (1975)
Edison screw lampholders : Part 2 Standard data sheets for lamp holders and gauges
06 2003
3 IS 11980(Part0.Sec0):1987 Lamp (bulb) cycle dynamo 10 2002
4 IS 12449(Part 1/Sec 0):1988 Starting devices (other than glow starters) : Part 1 General and safety requirements
06 2003
5 IS 12449(Part2/Sec0):1988 Starting devices (other than glow starters) : Part 2 Performance requirements
06 2003
6 IS 1258(Part0/Sec0):2005IIEC 60061-2 (1969)
Bayonet lamp holders (third revision)
7 IS 12897 (Part0/Sec0):2001 Filaments for General services electric lamps-guide (first revision) 06 2003
8 IS 12948 (Part0/Sec0):1990 IIEC 60357 (1982)
Tungsten halogen lamps (non-vehicle) 07 2001
9 IS 13021(Part 1/Sec 0):1991 IIEC 60928 (1990)
AC supplied electronic ballasts for tubular florescent lamps: Part 1 General and safety requirements
12 2000
10 IS 13021 (Part2/Sec0):1991 IIEC 60929 (1990)
Ac supplied electronic ballasts for tubular florescent lamps : Part 2 Performance requirements
12 2000
11 IS 14897 (Part0/Sec0): 2001 IIEC 60887 (1988)
Glass bulb designation system for lamps-Guide
12 IS15111(Part 1/Sec0):2002 IIEC 60968 (1988)
Self ballasted lamps for general lighting services : Part 1 Safety requirements
13 IS 15111(Part 2 / Sec 0):2002 IIEC 60969 (1988)
Self ballasted lamps for general lighting services : Part 2 Performance requirements
14 IS 1534 (Part1/Sec0):1977 IIEC 82 (1973)
Ballasts for fluorescent lamps : Part1 For switch start circuits (Secon revision)
07 2001
15 IS 15518(Part1/Sec 0):2004 Safety requirements for incandescent lamps : Part 1 Tungsten filament lamps for domestic and similar general lighting purposes
16 IS 1569(Part0/Sec 0):1976 Capacitors for use in tubular fluorescent high pressure mercury and low pressure sodium vapour discharge lamp circuits (first revision)
07 2001
17 IS 1901(Part 0/Sec 0): 1978 Visual indicator lamps (first revision) 07 2001
18 IS 2215(Part 0/Sec 0):2006 IIEC 155 (1975)
Starters for fluroescent lamps (third revision)
19 IS 2261(Part 0 / Sec 0): 1975 Lamps for flashlights (first revision) 12 2000
20 IS 2262 (Part 0 / Sec 0) : 1963 Transformers for high voltage luminous discharge tubes 07 2001
21 IS 2407 (Part 0 / Sec 0): 1963 Photometric integrators 10 2002
22 IS 2418 (Part 1 / Sec 0): 1977 IIEC 81 (1974)
Tubular fluorescent lamps for general lighting service : Part 1 Requirements and tests (first revision)
12 2000
23 IS 2418 (Part 2 / Sec 0): 1977 IIEC 81 (1974)
Tubular fluorescent lamps for general lighting service : Part 2 Standard lamp data sheets (first revision)
07 2001
24 IS 2418(Part 3 / Sec0): 1977 IIEC 61-1 (1969)
Tubular fluorescent lamps for general lighting service : Part 3 Dimensions of G-5 and G-13 bi-pin caps (first revision)
07 2001
25 IS 2418 (Part 4 / Sec 0): 1977 IIEC 61-3 (1969)
Tubular fluorescent lamps for general lighting service : Part 4 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)
10 2002
26 IS 2592(Part0/Sec0) : 1980 Lamps for lighting on board ships (first revision) 10 2002
27 IS 2596(Part 0/Sec 0): 2004 Bulbs (Lamps) for miners cap lamps (second revision)
28 IS 3323 (Part 0 / Sec 0): 1980 IIEC 60400(1972)
Bi-pin lampholders for tubular fluorescent lamps (first revision) 10 2002 1
163
ANNEXURE-VBureau Of Indian Standards
Electric Lamps And Their Auxiliaries
29 IS No. TITLE ReaffirmedDate Amd.30 IS 3324 (Part 0 / Sec 0 ) : 1982
IIEC 400 (1972)Holders for starters for tubular fluorescent lamps (first revision) 06 2003
31 IS 418(Part 0 / Sec 0 ): 2004 IIEC 60064 (1993)
Tungsten filament lamps for domestic and similar general lighting purposes (fourth revision)
32 IS 6701 (Part 0 / Sec 0 ) : 1985 IIEC 61-1 (1969)
Tungsten filament miscellaneous electric lamps (first revision) 07 2001
33 IS 7013 (Part 0 / Sec 0) : 1981 Radio dial lamps (first revision) 10 2002
34 IS 7027 (Part 0 / Sec 0) : 1984 IIEC 452 (1982)
Transistorized ballasts for fluorescent lamps (first revision) 07 2001
35 IS 8685 (Part 0 / Sec 0) : 1977 Aircraft lamps 07 2001
36 IS 8901 (Part 0 / Sec 0) : 1978 Lamps for aerodrome lighting fittings 07 2001 1
37 IS 8913 (Part 0 / Sec 0) : 1978 IIEC 360 (1971)
Methods of measurement of lamp cap temperature rise 10 2002
38 IS 897 (Part 0 / Sec 0) : 1982 IIEC 61-1 (1969)
Tungsten filament electric lamps for railway rolling stock (second revision)
03 2000 3
39 IS 9206 (Part 0/Sec 0):1979 IIEC 60061-1 (1972)
Dimension of caps for tungsten filament general service electric lamps
12 2000 2
40 IS 9589 (Part 0 / Sec 0): 1980 Electric Lamps for railway signalling 10 2002
41 IS 9900 (Part 1 / Sec 0) : 1981 IIEC 188 (1974)
High pressure mercury vapour lamps : Part 1 Requirements and test (Superseding IS:2183 and IS:7023)
10 2002 4
42 IS 9900 (part 2 / Sec 0): 1981 IIEC 188 (1974)
High pressure mercury vapour lamps : Part 2 Standard lamp data sheets (Superseding IS:2183 and IS:7023)
10 2002 1
43 IS 9900 (Part 3 / Sec 0) : 1981IIEC 188 (1974)
High pressure mercury vapour lamps : Part 3 Dimensions of lamp caps (superseding IS:2183 and IS : 7023)
10 2002
44 IS 9900 (Part 4 / Sec 0) : 1981 IIEC 61-3 (1969)
High pressure mercury vapour lamps : Part 4 Go and no-go gauges of lamp caps (Superseding IS : 2183 and IS : 7023)
10 2002
45 IS 9974 (Part 1 / Sec 0) : 1981 IIEC 662 (1980)
High pressure sodium vapour lamps : Part 1 General requirements and tests
10 2002 4
46 IS 9974 (Part 2 / Sec 0) : 1981 IIEC 662 (1980)
High pressure sodium vapour lamps : Part 2 Standard lamp data sheets
10 2002 2
164
Sl. No.
IS No. TITLE ReaffirmedDate
Amd.
1 16101 : 2012 General Lighting - LEDs and LED modules – Terms and Defini-tions
2 16102(Part 1) : 2012 Self- Ballasted LED-Lamps for General Lighting Services Part 1 Safety Requirements
3 16102(Part 2) : 2012 Self-Ballasted LED-Lamps for General Lighting Services Part 2 Performance Requirements
4 16103(Part 1) : 2012 Led Modules for General Lighting- Safety Requirements
5 15885(Part 2/Sec 13) : 2012 Lamp Control Gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Controlgear for Led Modules
6 16104 : 2012 d.c. or a.c. Supplied Electronic Control Gear for LED Modules - Performance Requirements
7 16105 : 2012 " Method of Measurement of Lumen Maintenance of Solid -State Light (LED) Sources"
8 16106 : 2012 "Method of Electrical and Photometric Measurements of Solid-State Lighting (Led) Products"
9 16108 : 2012 "Photobiological Safety of Lamps and Lamp Systems"
ANNEXURE-VIIS standards for LED
Notes
Notes
Notes
Notes