GESensing & Inspection Technologies
Advanced Modular Calibration and HART®
Communication System
DPI 620 SeriesCombines an advanced multi-function calibrator and HART communicator with world-class pressure measurement and generation.Now with ATEX /IEC approval.
2
System features
• Modularconceptprovidesgreaterflexibility• ATEXandIECapprovedforhazardousareas• Re-rangeduringuse• Expandovertime• Adaptbyapplication• Allowssignificantinventoryreductions• Simplifiesusertraining• Reducescostofownership• ACompleteHARTcommunicatorandmultifunctioncalibratorin
one device
The system includes:
A combined Multifunction calibrator…
• Accuracyfrom0.0025%rdg+0.002%FS• Measure,sourceandsimulatemA,mV,V,ohms,frequency,RTDs
and thermocouples• Easytousewithphotoqualitytouchscreen• Robust,weatherproofandextremelycompact
…and a HART digital communicator…• DeviceDescriptionLibraryforHARTdevices• Freeofchargeupgradesandnewdevicedescriptions• IntegrallooppowersupplytoenergiseHARTdevicesandloops• Menuselectable250ohmloopresistor• MeasuresmAandsourcestheprimaryvariablefordevicetrims
and calibration
…with advanced connectivity anddocumenting features
• AutomatecalibrationproceduresanddocumentAsFoundandAsLeftresults
• Storeacompleteplantdatabaseincludingtags,devicesandprocedures
Modularity brings a whole new perspective to multi-function testinstruments,calibratorsandHART communicators
• Graphicalviewsofdatalogfiles,calibrationresultsandhistoricaltrends
• PDAversionwithWindowsCE–viewloopdiagrams,datasheets,safetyprocedures,spreadsheetsandcreatetextdocuments.
• IEEE802.11gwirelessconnectionwithInternetaccess
Pressure measurement modules
• 25mbarto1000bar(10inH2Oto15000psi)• Accuracyfrom0.005%FS• Fullyinterchangeablemoduleswithnoneedforset-up,
calibration or tools
Pressure generation stations
• Advancedpressuregeneration -95%vacuumto20barpneumatic -95%vacuumto100barpneumatic -0to1000barhydraulic
• Stand-alonepressurestationscanreplacehandpumpsandcanbe used as comparators
Applications
• Instrumentationinstallation,commissioning,maintenanceandcalibration
• HARTtest,configurationandcalibration• Systemmeasurementandmonitoring• Indicator,recorderandcontrollertesting• Processloopsetupanddiagnostics• Switch,tripandsafetysystemtesting
For…
• Plantandprocessengineers• Servicecompaniesandsitecontractors• Installationandcommissioningengineers• Laboratorytechnicians
3
Features
• Multi-functioncapabilities:electrical,frequency,temperatureandpressure
• ATEX/IECapproved• CompleteHARTcommunicatorincluded• Modularre-rangeableandexpandable
concept• Individualcomponentscanbeusedas
stand-alone instruments• Allowssignificantinventoryreductions• Simplifiestrainingandimproves
operator safety• Reducescostofownership
Itsbasiccomponentisanultra-compact,electrical,frequencyandtemperaturecalibratorandHARTcommunicator,whichprovides simultaneous measurement and source capabilities with a fully featured HART digital interface.
Pressure measurement is provided byinterchangeable pressure modules thatcan be attached to the calibrator by a pressure module carrier.
Ifpressuregenerationisrequiredthecalibrator and pressure module canbe attached to one of three pressuregenerationstations,toformafully-integratedpressurecalibrator,of unparalleled performance.
The simple yet sophisticated design andconceptcombines,forthefirsttime,an advanced electrical calibrator withstate-of-the-art pressure measurementandgeneration,sothatthereisnolongerany need to compromise one measurandcapability in favour of another.
Aflexiblemodularsystem
Re-rangeablepressuremeasurementandgenerationfrom25mbar(10inH2O)to1000bar(15000psi)
The DPI 620 Series - Advanced Modular Calibration and HART Communication System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments.
Re-rangeable dual channel pressure measurement from25mbar(10inH2O)to1000bar(15000psi)
MeasureandsourcemA,mV,V,ohms,frequency,RTD’sand thermocouples.
4
The DPI 620 Series Advanced Modular Calibrator and HART Communicator
Features•Measure,sourceandsimulatemultipleparameters•CompleteHARTcommunicatorincluded•Easy-to-use,withphotoqualitycolourtouchscreen,whichcanbe
operated by a gloved hand•Weather-prooftoIP65•Candisplayupto6activereadings•Availablewitharangeofadd-onmodules,pressuremeasurementmodulesandgenerationstations,IntecalFieldCalibrationdocumentingmodule,300Vacmeasurementprobe(notavailableinISversion)
• Digitalinterfaceforpressuremodulesandfutureoptions•USBmasterandslaveforconnectingtoaPCandperipherals(notavailableinISversion)
•AvailableinWindowsCEversion•Long-lifebatterypack
A Compact and Powerful Electrical Calibrator and HART CommunicatorTheDPI620electricalcalibratorcanmeasureandsourcemA,mV,V,Ohms,frequencyandavarietyofRTDsandT/Cs.Itprovidesanisolated24Vlooppowersupplytoenergisedevicesandcontrolloopsandastabilizeddcvoltagesupplyforratiometrictransducers.
Thehighresolution,colourtouchscreenofthecalibratorshowsonlythosebuttonsnecessaryfortheimmediate,selectedtasks.Thebuttonshavebeensizedsothattheycanbeoperatedbyaglovedhand,withnoneedforastylus.Thedisplaycanbe
configuredtoshowuptosixreadingwindowsandcanshowelectricalandtemperatureinputsandoutputs,twopressuremodulereadings,anIDOSpressuremeasurement,andaUSB-connecteddevice,aswellasaHARTsummarywindoworfullHARTcommunicator with active mA measurement and actual primary variable readings.
Thereadingwindowsalsoactasactivekeysand,whenpressed,theyexpandtoshowmoredetailedinformationortoprovideadvance functions such as step and ramp outputs. Colour is used toemphasizeimportantinformation,forexample,redforcriticalorfailed values and green for pass or within tolerance.
The DPI 620 includes comprehensive documenting features for automating instrument calibration when used in conjunction with Intecal Calibration Management software.
The compact and lightweight calibrator is designed for ruggedfieldapplication,witharobust casing and weather-proofingtoIP65.Itfeatures a high-speed digital interface for connecting to pressure modules and pressure generating stations. This interface will also allow expansiontomeetfuturerequirementswhennewmodules and stations become available.ItalsofeaturesUSBconnectivity and a microSD card slot with 2 Gb of memory installed as standard.(TheISversionhas1Gboffixedinternalmemory.)
5
High performance HART communicatorThe DPI 620 multifunction calibrator now incorporates a fully featured HART®communicatorwhichsurpassesmarketleadingcommunicatorsinfunctionality,easeofuseandupgradesupportsuchthatasinglehandhelddevicecannowconfigurethefullrange of HART devices and perform mA trims and sensor calibrationswithouttheneedforsecondaryequipmentsuchasammeters,calibrators,powersuppliesandloopresistors.Thiscansignificantlyreduceequipmentinventory,costofownershipandgreatly simplify maintenance activities The DPI 620 contains the latest application software and a complete library of registered HARTdevicedescriptions.Upgradescanbesimplydownloadedfreeof charge from our website.
An ATEX and IEC approved multifunction calibrator andHARTcommunicatorwithWindowsCEThe four basic system components are available with ATEX and IEC approvalforuseinhazardousareas.Thisprovidesaflexibleandexpandablesystemthatcanbeconfiguredandoperatedsafelyinareaswithpotentiallyexplosiveatmospheres.
A Multifunction Electrical Calibrator and HART CommunicatorwithWindowsCETheWindowsCE-drivenversionoftheelectricalcalibratorprovidesall the computing power of a conventional hand-held PC or PDA. It providesstandardWindowsfilemanagementandofferspopularWindowsfeaturestoallowuserstocreatetextdocumentsandviewcommonfiletypesincludingExcel,PowerPoint,Word,pdfandimages.Thismeansthatoperatorscanconsultusermanuals,trainingpresentations,datasheets,installationdrawingsetcwhileinthefieldorontheplant.
6
TheDPI620CEwithWiFi*Advanced Modular Calibrator and HART Communicator
AwirelessIEEE802.11genabledMultifunctionElectricalCalibratorandHARTCommunicator(*NotavailablewiththeISversion)
TheDPI620CEversioncanbefurtherenhancewithwirelessIEEE802.11gcommunications.Forthefirsttime,inacalibratorofthistype,itispossibletolinktotheInternetandremotenetworksinordertoaccessinformationandtotransferdata.Thispowerfulfeaturewillbenefitservicetechnicianswhospendextendedperiodsawayfromheadofficeandforthosewhoneedinstantaccesstodata,safetyinformation,systemdrawings,productdatasheetsetc.,whileonthemove.Itwillalsoprovideaninterfacetofuturesystem modules when a physical connection is a hindrance.
TechnicalSpecificationsDPI 620/CE General SpecificationsDisplay Size:110mm(4.3in)diagonal;480x272pixels
LCD:Colourdisplaywithtouch-screenLanguages English{Default},Chinese,French,German,Italian,Portuguese,Russian,SpanishOperating temperature -10°to50°C(14°to122°F)Storage temperature -20°to70°C(-4°to158°F)Ingress Protection IP65(Dust-tight,jetsofwater)Humidity 0to90%RHNoncondensingShock/Vibration BSEN61010:2001;DefStan66-31,8.4catIII,1mDropTestedEMC Electromagneticcompatibility:BSEN61326-1:2006Electrical safety Electrical–BSEN61010:2001Pressure safety PressureEquipmentDirective-Class:SoundEngineeringPractice(SEP)Approved CEMarkedSize(L:W:H) DPI620only:183x114x42mm(7.2x4.5x1.7in)+MC620:≈265x114x64mm(10.4x4.5x2.5in)
+PM620:≈265x114x93mm(10.4x4.5x3.7in)Weight DPI620only:≈575g(1.3lb)–batteryincluded.MC620only:≈640g(1.4lb).PM620only:≈100g(0.2lb).Power supply Lithium-Polymerbattery(GEPartnumber:IO620-Battery);Capacity:5040mAh(minimum),5280mAh(typical);Nominalvoltage:
3.7V.Chargetemperature:0°to40°C(32°to104°F)Dischargetemperature:-20°to60°C(-4°to140°F).Note: For best battery performance, keep the temperature less than 60°C (140°F). Charge/dischargecycles:>500>70%capacity.
Duration Measurefunctions(CH1):≈12hourscontinuous.DualFunction,mAmeasure(CH2):≈7hours(24VSourceat12mA)
DPI 620 IS and DPI 620 IS CE Calibrator General SpecificationsDisplay Size:110mm(4.3in)diagonal;480x272pixels
OLEDColourdisplaywithtouch-screenLanguages English{Default},Chinese,French,German,Italian,Portuguese,Russian,SpanishOperating temperature -10°to40°C(14°to104°F)Storage temperature -20°to70°C(-4°to158°F)Ingress Protection IP65(Dust-tight,jetsofwater)Humidity 0to90%RHNoncondensingShock/Vibration BSEN61010:2001;DefStan66-31,8.4catIII,1mDropTestedEMC Electromagneticcompatibility:BSEN61326-1:2006Electrical safety Electrical–BSEN61010:2001Pressure safety PressureEquipmentDirective-Class:SoundEngineeringPractice(SEP)Approved CEMarkedSize(L:W:H) DPI620only:183x114x55mm(7.2x4.5x2.2in)+MC620:≈265x114x77mm(10.4x4.5x3in)
+PM620:≈265x114x93mm(10.4x4.5x3.7in)Weight DPI620only:≈1.1kg(2.4lb)–batteryincluded.MC620only:≈800g(1.8lb).PM620only:≈100g(0.2lb).Power supply NiMHbattery(GEPartnumber:IO620IS-Battery);Capacity:4000mAh(typical);Nominalvoltage:3.6V.Chargetemperature:0°to
40°C(32°to104°F)Dischargetemperature:-10°to40°C(-14°to104°F).Note: For best battery performance, keep the temperature less than 60°C (140°F). Charge/dischargecycles:>500>70%capacity.
Duration Measurefunctions(CH1):≈8hourscontinuous.DualFunction,mAmeasure(CH2):≈7hours(24VSourceat12mA)Approval Baseefa10ATEX0010X
IECExBAS10.0002XExII1G ExiaIICT4Ga(-10°C≤Ta≤+40°C)
EN60079-0:2009 ElectricalapparatusforPotentiallyExplosiveAtmospheres–GeneralRequirements.(Harmonized)(IEC60079-0:2007Edition5)
EN60079-11:2007 ElectricalapparatusforPotentiallyExplosiveAtmospheres–IntrinsicSafety‘i’.(Harmonized)(IEC60079-11:2006Ed5)
7
8
Electrical Measurement and SourceNLH&R±1°C(2°F)for24hrs(note1)
TotalUncertainty10°to30°C(50°to86°F) for1year(note3)
Additional error -10°to10°C(14°to50°F)30°to50°C(86°to122°F)
Resolution Display reading window
%Rdg +%FS %Rdg +%FS %Rdg/°C +%FS/°CMeasure modeDCVoltage Thermocouple PleaserefertoThermocouplespecificationtable CH1
TCmode-10to100mV 0.0045 0.008 0.007/0.009** 0.01 0 0.0005 0.001 CH1±200mV 0.0045 0.004 0.007/0.0085** 0.005 0 0.0005 0.001 CH1 CH2±2000mV 0.004 0.003 0.007/0.008** 0.005 0 0.0005 0.01 CH1 CH2±20V 0.0025/0.0035** 0.002/0.0025** 0.01/0.018** 0.002/0.0025** 0 0.0005 0.00001 CH1 CH2±30V 0.0035/0.005** 0.0035/0.0045** 0.01/0.019** 0.004/0.0045** 0 0.0005 0.0001 CH1 CH2
ACVoltage1* 0to2000mVAC 0.125 0.125 0.2 0.15 0.005 0.005 0.1 CH10to20VAC 0.1255 0.125 0.2 0.15 0.005 0.005 0.001 CH10to300VAC 1 0.06 1.5 0.1 0.05 0.005 0.01 CH1
Current ± 20 mA 0.006 0.005 0.012/0.016** 0.006/0.0065** 0 0.0005 0.0001 CH1 CH2±55mA 0.005 0.005 0.016/0.019** 0.005/0.0055** 0 0.0005 0.0001 CH1 CH2
Resistance RTD PleaserefertoRTDspecificationtable CH1(True, 0to400Ω 0.0055 0.001 0.009 0.0012 0 0.0005 0.001 CH14wire) 0to4000Ω 0.0055 0.001 0.009 0.0012 0 0.0005 0.01 CH1Resistance RTD PleaserefertoRTDspecificationtable CH1(4wire) 0to400Ω 0.012 0.005 0.015 0.006 0 0.001 0.001 CH1
0to4000Ω 0.0115 0.0045 0.015 0.006 0 0.001 0.01 CH1Frequency 0to1000Hz 0.0003 0.0002 0.003 0.0002 0.0001 CH1
1kHzto5kHz** 0.0003 0.0004 0.003 0.0004 0.00001 CH10 to 999999 CPM Refertoequivalentfrequency 0.01 CH10 to 999999 CPH Refertoequivalentfrequency 0.01 CH1Totalizingcounter Maximumcount9999999 1 CH1Trigger level Automaticandadjustable0to20V 0.1
Pressure 25mbarto1000bar (0.35psito15000psi)
Please refer to PM 620 pressure range table P1 P2
IDOSexternalmodule PleaserefertoIDOSUPMdatasheet.P/NIO620-IDOS-USB+IO620-USB-PCrequired IDOSUSBport Please refer to GE Sensing for compatible devices USB
Source modeDCVoltage TC mode PleaserefertoThermocouplespecificationtable
TCmode-10to100mV 0.009 0.008 0.014 0.01 0 0.0005 0.001 CH10to200mV 0.0045 0.004 0.007/0.0085** 0.005 0 0.0005 0.1 CH10to2000mV 0.004 0.003 0.007/0.008** 0.005 0 0.0005 0.1 CH10to12V 0.006 0.0035 0.01/0.018** 0.0035/0.004** 0 0.0005 0.001 CH1
Current 0 to 24 mA 0.01 0.004 0.015/0.016** 0.005/0.0065** 0 0.0005 0.001 CH1 CH20to24mA(24Vlooppower) 0.01 0.004 0.015/0.016** 0.005/0.0065** 0 0.0005 0.001 CH224Vlooppower 24V±10%
Resistance RTD PleaserefertoRTDspecificationtable CH10to400Ω(0.1mA) 0.024 0.0035 0.03 0.0075 0 0.001 0.01 CH10to400Ω(0.5mA) 0.004 0.0025 0.008 0.003 0 0.001 0.01 CH1400to2000Ω(0.05mA) 0.048 0.0035 0.06 0.006 0 0.001 0.01 CH12kto4kΩ(0.05mA) 0.048 0.0035 0.06 0.0045 0 0.001 0.01 CH1Maximuminputcurrent 0-400Ω5mA,400-2000Ω1mA,2000-4000Ω0.5mA
Frequency 0to1000Hz 0.0003 0.00023 0.003 0.00023 0.1 CH11kHzto5kHz** 0.0003 0.000074 0.003 0.000074 0.001 CH1Output waveform Square,positiveswingupto12V(adjustable),negativeswing-80mV(fixed)
SineandTriangular,adjustableamplitudeandoffsetwithinthelimits-2.5to+12VSquarewavepeakoutput 0to12V+/-20mV(10mAmaximum)0 to 99999 CPM Pleaserefertoequivalentfrequency 1 CH10 to 99999 CPH Pleaserefertoequivalentfrequency 1 CH1Totalizingcounter Maximumcount1000000.Rate1to50,000pulses/sec 1 CH1
Note1:NLH&R(non-linearity,hysteresisandrepeatability)specificationapplieswhencalibrationtemperatureisbetween10and30°C(50°Fand86°F).
Note 2: Specificationapplies,45to65Hzandbetween10%and100%offullscale.**
Note 3:TotaluncertaintyincludesreferencestandarduncertaintyNLH&Randtypicallongtermstabilityforoneyear(k=2)
Thedisplaycanbeconfiguredtoshowamaximumof6simultaneousreadingwindowsasfollows:CH1,CH2,P1,P2,IDOS,HART
*NotapplicabletotheISversion
**OnlyapplicabletotheISversion
9
“True Ohms” RTD Measure Mode (4-wire)Type Temperature
coefficientTemperature range TotalUncertainty
10°to30°C(50°to86°F)for1year
°C °F Rdg TosFrom To From To % °C °F
Pt50 3.85 -200.00 0.00 -328.00 32.00 0.012 0.05 0.090.00 850.00 32.00 1562.00 0.012 0.05 0.09
Pt100 3.85 -200.00 0.00 -328.00 32.00 0.012 0.04 0.070.00 850.00 32.00 1562.00 0.012 0.04 0.07
Pt100 3.92 -200.00 0.00 -328.00 32.00 0.012 0.04 0.070.00 850.00 32.00 1562.00 0.012 0.04 0.07
Pt 200 3.85 -200.00 0.00 -328.00 32.00 0.01 0.03 0.0510.00 260.00 32.00 500.00 0.01 0.03 0.051
260.00 850.00 500.00 1562.00 0.015 0.077 0.14Pt500 3.85 -200.00 -60.00 -328.00 -76.00 0.01 0.026 0.044
-60.00 0.00 -76.00 32.00 0.015 0.05 0.0860.00 850.00 32.00 1562.00 0.012 0.05 0.086
Pt1000 3.85 -200.00 -150.00 -328.00 -238.00 0.009 0.024 0.04-150.00 0.00 -238.00 32.00 0.011 0.036 0.061
0.00 850.00 32.00 1562.00 0.012 0.036 0.061Cu10 4.27 -200.00 0.00 -328.00 32.00 0.00 0.14 0.25
0.00 260.00 32.00 500.00 0.00 0.17 0.3D100 6.18 -200.00 0.00 -328.00 32.00 0.01 0.035 0.06
0.00 640.00 32.00 1184.00 0.012 0.035 0.06Ni100 6.72 -60.00 0.00 -76.00 32.00 0.00 0.026 0.047
0.00 250.00 32.00 482.00 0.00 0.03 0.055Ni120 6.72 -80.00 0.00 -112.00 32.00 0.00 0.022 0.04
0.00 270.00 32.00 518.00 0.00 0.028 0.05270.00 320.00 518.00 608.00 0.00 0.057 0.1
Standard RTD Measure Mode (4-wire)Type Temperature
coefficientTemperature range TotalUncertainty
10°to30°C(50°to86°F)for1year
°C °F Rdg TosFrom To From To % °C °F
Pt50 3.85 -200.00 0.00 -328.00 32.00 0.021 0.16 0.280.00 850.00 32.00 1562.00 0.024 0.16 0.28
Pt100 3.85 -200.00 0.00 -328.00 32.00 0.017 0.1 0.1750.00 850.00 32.00 1562.00 0.0215 0.1 0.174
Pt100 3.92 -200.00 0.00 -328.00 32.00 0.017 0.1 0.1750.00 850.00 32.00 1562.00 0.0215 0.1 0.174
Pt 200 3.85 -200.00 0.00 -328.00 32.00 0.017 0.069 0.120.00 260.00 32.00 500.00 0.018 0.069 0.12
260.00 850.00 500.00 1562.00 0.033 0.33 0.6Pt500 3.85 -200.00 -60.00 -328.00 -76.00 0.0165 0.051 0.09
-60.00 0.00 -76.00 32.00 0.017 0.16 0.290.00 850.00 32.00 1562.00 0.024 0.16 0.28
Pt1000 3.85 -200.00 -150.00 -328.00 -238.00 0.016 0.044 0.074-150.00 0.00 -238.00 32.00 0.018 0.1 0.175
0.00 850.00 32.00 1562.00 0.0215 0.1 0.174Cu10 4.27 -200.00 0.00 -328.00 32.00 0.035 0.66 1.18
0.00 260.00 32.00 500.00 0.01 0.66 1.18D100 6.18 -200.00 0.00 -328.00 32.00 0.019 0.1 0.174
0.00 640.00 32.00 1184.00 0.02 0.1 0.174Ni100 6.72 -60.00 0.00 -76.00 32.00 0.00 0.071 0.13
0.00 250.00 32.00 482.00 0.002 0.071 0.13Ni120 6.72 -80.00 0.00 -112.00 32.00 0.00 0.06 0.11
0.00 270.00 32.00 518.00 0.00 0.06 0.11270.00 320.00 518.00 608.00 0.00 0.2 0.36
10
Note:
ThesefiguresrelatetoDPI620uncertaintiesonly.
ForRTDMeasureandSourcefunctionstheuncertaintyis given by:-
Urtd=T(°C)x%Rdg+Tos(°C) orUrtd=T(°F)x%Rdg+Tos(°F)
whereT()isthemeasurementexpressedin°Cor°F.
Measurement resolution: 0.01°C/F.Simulationresolution0.1°C/F
Excitation current:
Measuremode0to400Ω2.5mA,400Ωto 4000Ω0.5mA;
Simulatemode0to400Ω5mAmax,0.4to2kΩ1mAmaxand2to4kΩ0.5mAmax.
Simulatemodepulsedexcitationcurrentminimumduration10ms
6RTD Simulate Mode (0.1mA min, 0-400Ω; 0.05mA min, 400-4000Ω)Type Temperature
coefficientTemperature range TotalUncertainty
10°to30°C(50°to86°F)for1year
°C °F Rdg TosFrom To From To % °C °F
Pt50 3.85 -200.00 0.00 -328.00 32.00 0.043 0.24 0.420.00 850.00 32.00 1562.00 0.043 0.24 0.42
Pt100 3.85 -200.00 0.00 -328.00 32.00 0.04 0.16 0.280.00 850.00 32.00 1562.00 0.04 0.16 0.28
Pt100 3.92 -200.00 0.00 -328.00 32.00 0.04 0.16 0.280.00 850.00 32.00 1562.00 0.04 0.16 0.28
Pt 200 3.85 -200.00 0.00 -328.00 32.00 0.0345 0.12 0.210.00 260.00 32.00 500.00 0.0345 0.12 0.21
260.00 850.00 500.00 1562.00 0.087 0.28 0.48Pt500 3.85 -200.00 -60.00 -328.00 -76.00 0.033 0.095 0.16
-60.00 0.00 -76.00 32.00 0.078 0.23 0.390.00 850.00 32.00 1562.00 0.078 0.23 0.39
Pt1000 3.85 -200.00 -150.00 -328.00 -238.00 0.032 0.085 0.15-150.00 0.00 -238.00 32.00 0.0675 0.19 0.32
0.00 260.00 32.00 500.00 0.0675 0.19 0.32260.00 850.00 500.00 1562.00 0.082 0.17 0.28
Cu10 4.27 -200.00 0.00 -328.00 32.00 0.00 0.85 1.530.00 260.00 32.00 500.00 0.00 0.92 1.66
D100 6.18 -200.00 0.00 -328.00 32.00 0.038 0.16 0.280.00 640.00 32.00 1184.00 0.038 0.16 0.28
Ni100 6.72 -60.00 0.00 -76.00 32.00 0.00 0.12 0.220.00 250.00 32.00 482.00 0.00 0.12 0.22
Ni120 6.72 -80.00 0.00 -112.00 32.00 0.00 0.11 0.20.00 270.00 32.00 518.00 0.00 0.11 0.2
270.00 320.00 518.00 608.00 0.00 0.25 0.45
11
SpecificationsrelatetoDPI620uncertaintiesonly
Measurementresolution0.01°C/F.Simulationresolution0.1°C/F
ColdJunction(CJ)Error(maximum)
Range:10to30°C(50to86°F)=0.2°C(0.4°F)
Add0.01°C(0.02°F)CJError/°ambienttemperaturechangeforranges:-10to10°C,30to50°C (14to50°F,86to122°F)
Thermocouple Measurement and SimulationType Standard Temperature range
(rangeshowscorrectresolution)TotalUncertainty10°to30°C(50°to86°F)for1year
°C °F °C °FFrom To From To
B IEC584 250.00 500.00 482.00 932.00 4.00 7.20500.00 700.00 932.00 1292.00 2.00 3.60700.00 1200.00 1292.00 2192.00 1.50 2.701200.00 1820.00 2192.00 3308.00 1.00 1.80
E IEC584 -270.00 -200.00 -454.00 -328.00 2.00 3.60-200.00 -120.00 -328.00 -184.00 0.50 0.90-120.00 1000.00 -184.00 1832.00 0.25 0.45
J IEC584 -210.00 -140.00 -346.00 -220.00 0.50 0.90-140.00 1200.00 -220.00 2192.00 0.30 0.54
K IEC584 -270.00 -220.00 -454.00 -364.00 4.00 7.20-220.00 -160.00 -364.00 -256.00 1.00 1.80-160.00 -60.00 -256.00 -76.00 0.50 0.90
-60.00 800.00 -76.00 1472.00 0.30 0.54800.00 1370.00 1472.00 2498.00 0.50 0.90
L DIN43710 -200.00 -100.00 -328.00 -148.00 0.40 0.72-100.00 900.00 -148.00 1652.00 0.25 0.45
N IEC584 -270.00 -200.00 -454.00 -328.00 7.00 12.60-200.00 -40.00 -328.00 -40.00 1.00 1.80
-40.00 1300.00 -40.00 2372.00 0.40 0.72R IEC584 -50.00 360.00 -58.00 680.00 3.00 5.40
360.00 1760.00 680.00 3200.00 1.00 1.80S IEC584 -50.00 70.00 -58.00 158.00 3.00 5.40
70.00 320.00 158.00 608.00 1.50 2.70320.00 660.00 608.00 1220.00 1.10 1.98660.00 1740.00 1220.00 3164.00 1.00 1.80
T IEC584 -270.00 -230.00 -454.00 -382.00 3.00 5.40-230.00 -50.00 -382.00 -58.00 1.00 1.80-50.00 400.00 -58.00 752.00 0.30 0.54
U DIN43710 -200.00 -50.00 -328.00 -58.00 0.60 1.08-50.00 600.00 -58.00 1112.00 0.30 0.54
C 0.00 1600.00 32.00 2912.00 0.80 1.441600.00 2000.00 2912.00 3632.00 1.00 1.802000.00 2300.00 3632.00 4172.00 1.40 2.52
D 0.00 100.00 32.00 212.00 1.10 1.98100.00 270.00 212.00 518.00 0.80 1.44270.00 1200.00 518.00 2192.00 0.60 1.081200.00 1800.00 2192.00 3272.00 0.80 1.44
12
PM 620 Pressure ModulesFeatures•Fullyinterchangeablewithnoneedforset-uporcalibration•Simplescrewfit-handtightnotoolsrequired•Rangesfrom25mbarto1000bar(10inH2Oto15000psi)•Accuracyfrom0.005%FS
The PM 620 is the latest development in digital output sensortechnologyincorporatinganumberofkeyinnovationstoallowpressurere-rangingofcompatibleequipment.Asimplescrewfitmakesboththepressureandelectricalconnectionswithouttheneedfortools,sealingtape,cablesorplugsanddigitalcharacterisation allows interchangeability without set-up orcalibration. The modules can be changed in a few seconds tore-range an instrument at a fraction of the cost of a new one.The pressure modules can be used in conjunction with therelevant pneumatic or hydraulic pressure station and the DPI 620multifunction calibrator to form an integrated pressure calibratorfor test and calibration of pressure instruments includingtransmitters,transducers,switches,gauges,indicatorsandrecorders.Alternatively,themodulescanbecombinedwiththepressurestationbyamodulecarrier,whichaddsadualchannelpressure measurement capability that can be re-ranged in seconds.
Pressurerangesareavailablefrom25mbarto1000bar(10inH2O to15000psi)withatotalmeasurementuncertainty,includingoperationover0to50o C(32to122°F)foroneyear.
MC 620 Module CarrierFeatures• 2independentpressurechannels• Simpletore-range• Notoolsorsetup–justasimplescrewfit• Pressureprotection
The MC 620 module carrier attaches the head of the DPI 620 to provide two independent pressure measurement channels. These canbefittedwithanyPM620pressuremodulefrom25mbarto1000bar(10inH2Oto15000psi).Asimplescrewfitmeansnotoolsarerequiredandensuresbothahighintegritypressuresealandareliable digital interface.
Thepressureconnectiontothedeviceundertestisasimplefingertight system with interchangeable adaptors. This tool-less connectionmethodisquicktouseandprovidesahighintegrityseal. The same system is used on the interconnecting hose and adaptoraccessories,suchthattheonlyconnectionrequiring toolsandseals/sealingtapeisthefinalconnectiontothedeviceunder test.
The carrier is also designed for pressure safety and will automaticallysealifamoduleisnotfittedoriftheuserattemptstoremove it.
MC 620 SpecificationMaximumpressure 400bar(5800psi)pneumatic
1000bar(15000psi)hydraulicPressure media Compatible with stainless steel and nitrile
sealsPressure safety PressureequipmentdirectiveclassSEPSizeandweight 80mmx100mmx110mm,640g
MC 620 IS SpecificationOperating Temperature -10°to40°C(14°to104°F)Sizeandweight 78mmx100mmx110mm,820g
13
PM 620 IS Pressure Module and Dummy Pressure Module SpecificationOperating temperature -10to40°C(14to104°F)Approval Baseefa10ATEX0012X
IECExBAS10.0004XExII1GExiaIICT4Ga(-10°C≤Ta≤+50°C)
EN60079-0:2009 Electrical apparatus for Potentially ExplosiveAtmospheres–GeneralRequirements.(Harmonized)(IEC60079-0:2007Edition5)
EN60079-11:2007 Electrical apparatus for Potentially ExplosiveAtmospheres–IntrinsicSafety‘i’.(Harmonized)(IEC60079-11:2006Ed5)
PM 620 SpecificationMaximumintermittentpressure 2xFSMaximumworkingpressure 110%FSSealing IP65(protectedagainstdustand
jetsofwater)Operating temperature -10to50°C(14to122°F)Storage temperature -20to70°C(-4to158°F)Humidity 0to90%RHnoncondensingShockandvibration BSEN61010:2001;Defstan66-31,
8.4catIII),1mDropTestedEMC BSEN61326-1:2006Electrical safety BSEN61010:2001Pressure safety Pressureequipmentdirectiveclass
SEPApproval CEmarkedSizeandweight L.56mm,Dia.44mm,
106gmaximum
Absolute Ranges (referenced to vacuum)Media NLH&R
20°C±2°C (68°F±4°F)
24 hr
NLH&R 20°C±2°C (68°F±4°F)
24 hr
NLH&R 0°to50°C(32°to122°F)
24 hr
NLH&R 0°to50°C(32°to122°F)
24 hr
Total uncertainty 0°to50°C
(32°to122°F) for1year
Absolute *SealedGauge
Absolute *SealedGauge
Absolute *SealedGauge
bar psi %FS %FS %FS %FS *%FS %FS0to0.35 0to5 2 0.030 0.050 0.0800to1.2 0to35inHg 2 0.020 0.036 0.0700 to 2 0 to 30 2 0.015 0.036 0.0520to3.5 0to50 2 0.015 0.036 0.0500to7 0to100 2 0.015 0.036 0.0500to10 0to150 2 0.015 0.005 0.030 0.020 0.047 0.0250 to 20 0 to 300 2 0.015 0.005 0.030 0.020 0.047 0.0250to35 0to500 2 0.015 0.005 0.030 0.020 0.047 0.0250to70 0to1000 2 0.015 0.005 0.030 0.020 0.047 0.0250to100 0to1500 2 0.015 0.005 0.030 0.020 0.046 0.0250to135 0 to 2000 2 0.015 0.005 0.030 0.020 0.046 0.0250 to 200 0 to 3000 2 0.015 0.005 0.030 0.020 0.046 0.0250to350 0to5000 2 0.015 0.005 0.033 0.020 0.049 0.0250to700 0to10000 2 0.015 0.005 0.033 0.020 0.049 0.0250to1000 0to15000 2 0.015 0.005 0.033 0.020 0.049 0.025
Gauge Ranges (referenced to atmosphere)Media NLH&R
20°C±2°C(68°F±4°F)
24 hr
NLH&R0°to50°C
(32°to122°F)24 hr
Total uncertainty 0°to50°C
(32°to122°F)for1year
Gauge Gauge Gaugebar psi %FS %FS %FS±0.025 ±10inH2O 1 0.090 0.090 0.100±0.07 ±1 1 0.025 0.030 0.047±0.2 ±3 1 0.020 0.027 0.045±0.35 ±5 2 0.020 0.025 0.044±0.7 ±10 2 0.015 0.020 0.041±1 -14.5to15 2 0.015 0.020 0.041-1to2 -14.5to30 2 0.015 0.020 0.025-1to3.5 -14.5to50 2 0.010 0.020 0.025-1to7 -14.5to100 2 0.010 0.020 0.025-1to10 -14.5to150 2 0.005 0.020 0.025-1to20 -14.5to300 2 0.005 0.020 0.0250to35 0to500 2 0.005 0.020 0.0250to70 0to1000 2 0.005 0.020 0.0250to100 0to1500 2 0.005 0.020 0.0250to135 0 to 2000 2 0.005 0.020 0.0250 to 200 0 to 3000 2 0.005 0.020 0.025
NLH&RNon-linearity,hysteresisandrepeatability Compatiblewithnon-corrosivegas/fluid Compatible with stainless steel* Thereadingcanbereferencedtoambientair pressure via a software feature of the DPI 620
allowing the same module to be switched between absolute and sealed gauge measurement
DPI620pressureresolution:adjustable4to7digitsUncertaintyconfidencelevel95%(K=2)
14
ThePV621,622and623Pressure StationsFeatures•Auniquelycapable,re-rangeableandselfcontainedpressuretest
system•Advancedpressuregeneration -95%vacuumto20bar(300psi)pneumatic -95%vacuumto100bar(1500psi)pneumatic -0to1000bar(15000psi)hydraulic• Standalonereplacementsforhandpumps• Benchtopuseascomparators
Therearethreepressuregenerationstations:thePV621,apneumaticpressuregeneratorforpressures95%vacuumto20bar(300psi);thePV622,apneumaticpressuregeneratorforpressures95%vacuumto100bar(1500psi);andthePV623,ahydraulicpressuregeneratorforpressuresupto1000bar (15000psi).Eachpressurestationisdesignedforstand-aloneoperation as a pressure generator and can replace conventional handpumpstoprovidegreaterefficiencyandeaseofuse.Theycanalsobeusedontheworkbenchasacomparators.
ThePV621hasaconventionalhandpump,volumeadjusterandpressure/vacuumselector,butwillgeneratepressurewithhalftheeffortofconventionalsystems.
ThePV622100bar(1500psi)pneumaticstationrepresentsafive-foldincreaseincapabilityandsolvesthetransportationandhealth and safety issues of using gas bottles and regulators as a pressuresourceinfieldlocations.Itfeaturesaninnovativedualstage system incorporating a hand pump to generate pressure and ascrewpresstointensifythepressure.Foratypical4”gaugemountedonthestation,100bar(1500psi)canbeachievedinjust
onecycle,buttheprocesscanberepeatedasmanytimesasrequiredforhighervolumesystems.Thescrewpressconvertstoaprecision volume adjuster allowing the test pressure to be increased ordecreasedasrequired.
ThePV623solvesmanyoftheproblemsassociatedwithhydraulicpressuregenerationbygeneratingpressureto1000bar(15000psi)andprovidingastablepressurewithin1minute.Inconventionalsystems priming to remove air is wasteful and messy and pressure stability is only achieved after several minutes. This instability is the resultofthermalchange,seenasalargepressureleak,whichcanrenderthedeviceunusableforcalibrationfor10minutesperpressure test.
OperationofthePV623issimple.Thescrewpressisrotatedanti-clockwisetofillthescrewpresswithhydraulicfluidfromaninternalreservoir.Thescrewpressisthenrotatedclockwisetofillthetestdeviceandcompressthehydraulicfluid.Forlargervolumesystemstheprocesscanberepeated,anon-returnvalvepreventspressurelossontherefillcycle.Whenthetestpressurehasbeenreached the screw press converts to a precision volume adjuster for makingfineadjustments.
Combining any of the pressure stations with a PM 620 pressuremoduleandtheDPI620calibratorcreatesauniquelycapable,self-contained pressure calibrator.
PV 621, 622 and 623 SpecificationMaximumpressure PV62120bar(300psi)pneumatic
PV622100bar(1500psi)pneumaticPV6231000bar(15000psi)hydraulic
Pressure media PV621andPV622non-corrosivegases, PV623de-mineralizedwaterormineraloil (ISOviscositygrade<22)
Operating temperature -10°to50°C(14°to122°F)Forwater+4to+50°C(39to122°F)
Storage temperature -20to70°C(-4to158°F)(mustbeemptyofwater)Shockandvibration BSEN61010:2001;Defstan66-31,8.4catIII,
1mdroptestedPressure safety PressureequipmentdirectiveclassSEPSizeandweight 450mmx280mmx235mm,
PV6212.65kg,PV6223.30kg,PV6233.75kg
PV 62X IS Pressure Station SpecificationOperating temperature -10° to 40°C(14°to104°F)
Baseefa10ATEX0011X IECExBAS10.0003X Page11of46TR0753Issue1 ExII2G
EN60079-0:2009 ElectricalapparatusforPotentiallyExplosiveAtmospheres–GeneralRequirements.(Harmonized)(IEC60079-0:2007Edition5)
EN60079-11:2007 ElectricalapparatusforPotentiallyExplosiveAtmospheres–IntrinsicSafety‘i’.(Harmonized)(IEC60079-11:2006Ed5)
PV621 PV622PV623
15
16
Ordering InformationPlease order the following model numbers and part numbers as separate line items.
Model DPI 620Advanced modular calibratorModel DPI 620 CEAdvancedmodularcalibratorwithWindowsCE
The DPI 620/CE are supplied with a rechargeable lithium polymer batteryP/NIO620-BATTERY,universalmainsadaptor/chargerP/NIO620-PSU,IO620-AC300VACtruermsmeasurementprobe,testleads,calibrationcertificate,quickreferenceguideandCDwithmultilingual user manuals.
Model DPI 620 IS Intrinsically safe advanced modular calibratorModel DPI 620 IS CEIntrinsicallysafeadvancedmodularcalibratorwithWindowsCE
The DPI 620 IS/IS CE are supplied with a rechargeable NiMH battery P/NIO620IS-BATTERY,batterychargerIO620IS-CHARGERandbatterychargingstationIO620IS-CRADLE,testleads,calibrationcertificate,quickreferenceguideandCDwithmultilingualmanuals.
Model MC 620Pressure module carrierSuppliedwithG1/8femaleand1/8NPTfemaleadaptors(2ofeach).
Model MC 620 ISIntrinsically safe pressure module carrier
Model PM 620 “pressure range” and “type”Pressuremodule.Suppliedwithcalibrationcertificate.e.g.,PM62020bar(300psi)gauge
Model PM 620 IS “pressure range” and “type”Intrinsically safe pressure module. Supplied with calibration certificate. e.g.PM620IS20bar(300psi)gauge
Model PV 621Pneumaticpressurestation20bar(300psi)Model PV 621 IS Intrinsicallysafepneumaticpressurestation20bar(300psi)Model PV 622Pneumaticpressurestation100bar(1500psi)Model PV 622 ISIntrinsicallysafepneumaticpressurestation100bar(1500psi)Model PV 623Hydraulicpressurestation1000bar(15000psi)Model PV 623 ISIntrinsicallysafehydraulicpressurestation1000bar(15000psi)
ThePV621,622and623aresuppliedwithG1/8femaleand1/8NPTfemaleadaptors,carrystrap,quickreferenceguideandCDwithmultilingualusermanual.Inaddition,thePV623includesaplasticbottleforhydraulicfluid.
DPI 620 / DPI 620 CE AccessoriessIntecalBasic(P/N781-016-B)Developed to meet the growing demand on industry to comply with qualitysystemsandcalibrationdocumentation.DevicetestproceduresarecreatedinaWindows® based application and are allocatedtoworkordersfortransfertotheDPI620.TheproceduresconfiguretheDPI620parameters,automaticallymanageAsFoundandAsLeftcalibrationsandreporttheresultswithPass/Failstatus.Results are uploaded to the PC for archiving and to print calibration certificates.
IntecalAdvanced(P/N781-016-A)BuildsontheconceptofIntecalBasicsupportingbothportablecalibratorsandon-lineworkshopinstruments.Intecalissimple-to-usecalibrationmanagementsoftware,whichenablesahighproductivityofscheduling,calibrationanddocumentation.
IntecalFieldCalibrationManager (P/NIO620-FIELD-CAL)This software module adds the general features of Intecal calibration management software to the DPI 620 allowing new device records andprocedurestobecreatedinthefieldwhilegivingaccesstofullhistoricaldataandtrendanalysis.ItworksseamlesslywiththedocumentingcapabilityoftheDPI620toautomatefieldcalibrationand it can operate independently of a PC as a stand-alone calibrator and instrument database or it can fully integrate with the PC master database of Intecal Calibration Management Software. This module isidealforfieldservicetechnicianswhospendextendedperiodsawayfromtheheadofficeorforthosewhoneedfulldatabaseaccess when out on the plant. Complete sections of the Intecal database,containingallthedevicedetails,proceduresandhistoricalrecordsformultipleworklocations,canbetransferredtotheDPI620or split between multiple DPI 620s for larger teams. This transfer of dataandtheeventualsynchronizingofthemasterdatabasecanbeachievedinanumbersofways;SDmemorycard,USBmemorystick,USBcableandviaWiFiconnectivitytotheinternetandremotenetworks.AdemonstrationversionofFieldCalibrationManagerisprovidedinallnewDPI620s.Itislimitedto5devicerecordsbutcanbefullyenablebypurchasingIO620-FIELD-CAL.
For more information on Intecal and a 30 day free trial visit www.gesensing.com
ReplacementACvoltagemeasurementprobe(P/NIO620-AC)1
AttachestotheDPI62030Vsocketstoprovide300VACtruermsmeasurement. IO620-AC is supplied as standard with all new DPI 620/CE.
Carryingcase(P/NIO620-CASE-1)1
Aprotectivecarryingcasewithbeltloop,shoulderstrapandlargepocketfortestleadsandaccessories.
17
USBcable(P/NIO620-USB-PC)2
Connects the DPI 620 to a PC.
IDOStoUSBconverter(P/NIO620-IDOS-USB)1
Allows connection of an IDOS universal pressure module to theDPI620.IO620-USB-PCisalsorequiredtoconnecttheconvertertotheDPI620USBport.
USBtoRS232cable(P/NIO620-USB-RS232)1
Connects the DPI 620 to an RS 232 interface.
WiFiIEEE802.11gforDPI620CE(P/NIO620-WIFI)MicroSDwirelesscommunicationcardtoprovideIEEE802.11gcompatibilityforconnectingwithPCsandwirelessnetworks.Onlysuitable for use with the DPI 620 CE which provides wireless networkconfigurationtoolsandMicrosoftInternetExplorer.
Accessoriesspecificallyfor the DPI 620 IS / CECarryingcase(IO620-CASE-1-IS)AsIO620-CASE-1butsuitableforuseinhazardousareas
Systemcarryingcase(IO620-CASE-2-IS)AsIO620-CASE-2butsuitableforuseinhazardousareas
Spare/replacement NiMH rechargeable battery(IO620IS-BATTERY)Spare/replacement NiMH rechargeable battery. Only suitable for use with the DPI 620 IS/IS CE. Only charge using IO620IS-CHARGER andIO620IS-CRADLE
Spare/replacement battery charger. (IO620IS-CHARGER)Spare/replacement battery charger. Only suitable for chargingIO620IS-BATTERY.MustbeusedinconjunctionwithIO620IS-CRADLE.
Spare/replacement battery charging station (IO620IS-CRADLEEx)Spare/replacement battery charging station. Only suitable for usewithIO620IS-BATTERYandIO620IS-CHARGER.
Carryingcase(IO620-CASE-1-IS)AsIO620-CASE-1butsuitableforuseinhazardousareas
Systemcarryingcase(P/NIO620-CASE-2)1
A protective carrying case for system components including the DPI 620,MC620,PM620modules,testleads,hoseandadaptors.
Systemcarryingcase(IO620-CASE-2-IS)AsIO620-CASE-2butsuitableforuseinhazardousareas
System carrying case IO620-CASE-3-IS
AsIO620-CASE-3butsuitableforuseinhazardousareas
Spare/replacement lithium polymer rechargeable battery(P/NIO620-BATTERY)1Spare/replacementbatteryfortheDPI620/CE.IO620-BATTERYissupplied as standard with all new DPI 620/CE.
Spare/replacement NiMH rechargeable battery
(IO620IS-BATTERY) Spare/replacement NiMH rechargeable battery. Only suitable for use with the DPI 620 IS/IS CE. Only charge using IO620IS-CHARGER andIO620IS-CRADLE
Batterychargingstation(P/NIO620-CHARGER)1
Thisexternalbatterychargerallowsasparebatterytobechargedindependently of the DPI 620 for minimum instrument down time. Power is provided by the standard mains adaptor. A complete chargecycletakesapproximately4hours.Simultaneously,theDPI620canbeconnectedviaaUSBcabletoprovideatop-upcharge(fullchargein12hours).
Spare/replacement battery charger. (IO620IS-CHARGER)Spare/replacement battery charger. Only suitable for charging IO620IS-BATTERY.MustbeusedinconjunctionwithIO620IS-CRADLE.
Spare/replacement battery charging station (IO620IS-CRADLEEx) Spare/replacement battery charging station. Only suitable for use withIO620IS-BATTERYandIO620IS-CHARGER.
Spare/replacement mains adaptor (P/NIO620-PSU)1
A spare/replacement universal mains adaptor for use with DPI 620 andIO620-CHARGER.Inputvoltage100to240VAC50/60Hz.Mainssocketadaptorsareprovided.IO620-PSUissuppliedasstandardwith all new DPI 620/CE.
18
PV621,622,623and MC 620 AccessoriesDirt moisture trapPreventscontaminationofthePV621and622pneumaticsystemsand cross contamination from one device under test to another. The IDTconnectsdirectlytothePV621and622pressureportandreplicatesthequickfitconnectionforcompatibilitywiththehoseandadaptorkitsP/N IO620-IDT621:Maximumworkingpressure20bar(300psi)PN IO620-IDT622:Maximumworkingpressure100bar(1500psi)
Pressure relief valveWhenfittedtoaPV62XpressurestationprotectsthePM620pressure module and the device under test from overpressure.
Pressure station carrying case (P/NIO620-CASE-3)1
Aprotectivecarryingcasewithshoulderstrapandlargepocketforaccessories. Also accommodates the assemble system including the DPI 620 and PM 620.
Modularsystemtransitcase(P/NIO620-CASE-4)2Arigidtransitcasewithwheelsandanextendablehandle.AccommodatestwoPV62Xpressurestations,DPI620,MC620andPM620modules,withamplestoragespaceforaccessories.Size:736mmx554mmx267mm.Weight:8,5kgempty
Pneumatichosekit1
Ahighpressurepneumatichoseratedto400bar(5800psi). ToollessquickfittothePV621,PV622andMC620pressureports.TerminatedwithaquickfitconnectorcompatiblewiththetestpointadaptorssuppliedwiththePV62X,MC620andtheadaptorsets.P/N IO620-HOSE-P1: 1metrepneumatichosekitP/N IO620-HOSE-P2: 2metrepneumatichosekitP/N IO620-HOSE-P1-IS AsIO620-HOSE-P1butsuitableforuseinhazardousareas
P/N IO620-HOSE-P2-IS AsIO620-HOSE-P2butsuitableforuseinhazardousareas
DPI620Hydraulichosekit1
Ahighpressurehydraulichoseratedto1000bar(15000psi). ToollessquickfittothePV623andMC620pressureports.TerminatedwithaquickfitconnectorcompatiblewiththetestpointadaptorssuppliedwiththePV62X,MC620andtheadaptorsets.P/N IO620-HOSE-H1: 1metrehydraulichosekitP/N IO620-HOSE-H2: 2metrehydraulichosekitP/N IO620-HOSE-H1-IS AsIO620-HOSE-H1butsuitableforuseinhazardousareasIO620-HOSE-H2-IS AsIO620-HOSE-H2butsuitableforuseinhazardousareas
Pressure adaptor setAsetoftestpointadaptorstoconnectthetoollessquickfitPV62X,MC620andtheextensionhosestothedeviceundertest.P/N IO620-BSP: G1/8maleandG¼male,G¼female,G3/8femaleand G½ femaleP/N IO620-NPT:1/8”maleand¼”male,¼”female,3/8”female,and½”femaleP/N IO620-MET: 14mmand20mmfemale
Comparatoradaptor(P/NIO620-COMP)AllowsthePV62Xpressurestationtobeusedasacomparator.Theadaptor connects to the stations pressure port and provides two outletportsformakinggaugecomparisons..Compatible withthetestpointadaptorssuppliedwiththePV62Xandtheadaptors sets.
Blankingplug(P/NIO620-BLANK)AllowsthePV621and622tobeusedaspressuregeneratorsindependentlyoftheDPI620andPM620byblankingthePV62Xpressuremoduleport.NotrequiredfortheDPI623astheportisself-sealing.
DPI104Gaugeadaptor(P/NIO620-104ADAPT)AllowsaDPI104digitalpressuregaugetobeconnectedtothePV62X pressure module port in place of DPI 620 and PM 620 to provide a simple low cost pressure calibrator.
AccessoriesspecificallyforthePV621IS,622ISand 623 ISSystemcarryingcase(IO620-CASE-3-IS)AsIO620-CASE-3butsuitableforuseinhazardousareas
Relief Valve TablePart number Forusewith Factory
setting Adjustable range
bar psi bar psiIO620-PRV-P1 PV621PV622 1 15 0.2to1 3to15IO620-PRV-P2 PV621PV622 5 100 3to7 45to100IO620-PRV-P3 PV621PV622 30 435 16to32 230 to 460IO620-PRV-P4 PV622 60 870 30 to 60 435to870IO620-PRV-P5 PV622 100 1500 60to100 870to1500IO620-PRV-P6 PV621PV622 3 45 1.1to3 16to45IO620-PRV-P7 PV621PV622 12 170 6.1to12 90to170IO620-PRV-P8 PV621PV622 18 260 12.1to18 175to260IO620-PRV-H1 PV623 50 725 10to50 145to725IO620-PRV-H2 PV623 200 3000 50to200 725to2900IO620-PRV-H3 PV623 400 6000 200 to 400 2900to5800IO620-PRV-H4 PV623 700 10000 300to700 4350to10000IO620-PRV-H5 PV623 1000 15000 600to1000 8700to15000
19
PneumatichosekitP/N IO620-HOSE-P1-ISAsIO620-HOSE-P1butsuitableforuseinhazardousareasP/N IO620-HOSE-P2-ISAsIO620-HOSE-P2butsuitableforuseinhazardousareas
HydraulichosekitP/N IO620-HOSE-H1-ISAsIO620-HOSE-H1butsuitableforuseinhazardousareasP/N IO620-HOSE-H2-ISAsIO620-HOSE-H2butsuitableforuseinhazardousareas
1 Not suitable for use with the DPI 620 IS/IS CE.
2 Safe area use only.
Supporting ServicesGESensingprovidesServicestoenhance,supportandcomplementtheAMCproductrange.Ourhighlytrainedstaffcansupportyou,nomatter where you are in the world.
Pressure measurement trainingGESensing’strainingandeducationprogramofferscomprehensivestandardandcustomizedcurriculafocusingonoperation,application,maintenanceandtechnology.ForAMCuserswerecommend the 3 day Principles of Automated Pressure Calibration Training course. This is regularly delivered and classes can be held atvariouslocations,yourlocalfacilityorthroughon-linedelivery.Qualitytrainingenablesyourengineers&technicianstooptimizeyourbusiness’performance.
Nationally accredited calibrationNewproductissuppliedwithfactorycalibrationcertificateswithmeasurementstraceablebacktointernationalstandards.Forapplications where initial nationally accredited calibration certificatesarerequiredorperiodicre-calibrationisdesiredGEsensing can provide the solution.
ExtendedwarrantytermsNewproductissuppliedwithanindustrybenchmarkedinitialwarranty.Forpeaceofmind,improvedcostpredictabilityandIncreasedassurance,extendcoverageonyourequipmentbyupto5yearsterm.
Multi-year calibration and repair services agreements Available for controllers&calibrators,multi-yearserviceagreementsincreasecostpredictabilitybyprovidingfixedratesforextendedperiods.Withlargerscopeundertakingscustomizedplanscanbeadaptedto your needs.
RentalGE’srentalprogramoffersasimple,quickandaffordablesolutionforunexpectedmeasurementneed.Rentalsallowcustomerstobefully operational when challenges that are not foreseen arise.
Assistingourcustomersinmeetingpeakdemands,unexpectedsituations,evaluationsandalsotominimisedowntimeofimportantprocessesawiderangeofmeasurement,testandcalibrationequipmentisavailableonashort-termrentalbasis…frompressureindicators to portable calibrators and sophisticated air data test systems.Therentalfleetisavailablefrominventory,Factorytested&calibratedwithaminimumrentalperiodonly1week.Withlargerscopeundertakingsanyproductcanbemadeavailableforrental.
MaintenanceShouldyourequipmentneedmaintenanceourglobalrepairfacilitiesarehappytoserve.Workisconductedbytrainedapprovedtechnicians,usingcontrolledoriginalequipmentpartsandprocedures so restoring the product to design condition. This is particularlyimportantfortheperformanceexpectationsandadvanced features incorporated in the AMC range. Should you wish toconductyouownmaintenanceanumberofspareskitsareavailable to facilitate this.
Services Ordering InformationPlease order the following as separate line items.
Calibration
IO620-CAL-ELECDPI 620 Multifunction calibrator accredited calibration.
IO620-CAL-PRESSPM 620 Pressure module accredited calibration.
Extended WarrantyExtendyourinstrumentsmanufacturer’swarrantyto2,3,4or5years.
WARRANTY- *Where*=2,3,4or5toindicateyourrequiredextendedwarrantyperiod(eg:WARRANTY-3)
Calibration and Repair ContractsThree levels of calibration and repair service contracts are available.
Bronze–Accreditedcalibrationonly(preandpostadjustmentresultsgiven)Silver–AccreditedcalibrationandLevelArepairGold–AccreditedcalibrationandLevelAandLevelBrepair
Availableinyearlyintervalsupto5years.
CALREP-BRONZE-*CALREP-SILVER-*CALREP-GOLD-*
Where*=1,2,3,4or5toindicateyourrequiredcalibrationandrepaircontractperiod(eg:CALREP-SILVER-3)
Note:
LevelArepaircovers,valves,sealsandfittings
LevelBrepaircovers,mainPCAandmanifold(whereapplicable)
www.gesensinginspection.com
2010GE.Allrightsreserved.BR-173D-2
©2010AllRightsReserved.VersioncontrolSDS0003issue2
Allspecificationsaresubjecttochangeforproductimprovementwithoutnotice.GE® isaregisteredtrademarkofGeneralElectricCo.Othercompanyorproductnamesmentionedinthisdocumentmaybetrademarksorregisteredtrademarksoftheirrespectivecompanies,whicharenotaffiliatedwithGE.
