GEARLESS PRESS SOLUTIONS
GEARLESS PRESS SOLUTIONS
Printing width: 40” – 63”/ 78”*
Print Repeat: 15.8” – 39.3”
Max. Printing Speed:
1500 FPM/2000 FPM*
Frame thickness: 4.7”
C.I. Drum Diameter: 77”
Anilox Diameter: 6.8”/7.2”*
8-Color XG (High-Speed)
8-Color XG-LR (Large Repeat
)Printing width:
40” - 63” / 78”*
Print Repeat: 17.7” – 47.2”
Max. Printing Speed:
1500 FPM/2000 FPM*
Frame thickness: 4.7”
C.I. Drum Diameter: 94.4”
Anilox Diameter:6.8”/7.2”*
Printing width: 40” – 63”/ 78”*
Print Repeat: 15.8” – 39.3”
Max. Printing Speed:
1500 FPM/2000 FPM*
Frame thickness: 4.7”
C.I. Drum Diameter: 94.4”
Anilox Diameter:6.8”/7.2”*
10-Color XG (High-
Speed)
* Available Optional Features
XG 10-COLOR PRESS
C.I. DRUM SERVO DRIVE
Direct drive of the C.I. Drum by a special High Torque servo motor
Printing speeds up to 2000 Printing speeds up to 2000 FPMFPM
HEAVY-DUTY PRINT DECK DESIGN
XG DECK SUPPORT SYSTEM
Dual Bearing Supports with Dual Linear Rails with Recirculating Bearings
Most Robust Mandrel Support in the Industry!
COLOR DECK SUPPORT SYSTEM
Dual Linear Rails with Recirculating
Bearings
Pre-Loaded Ball Screws
DIRECT SERVO DRIVE – GEARLESS
Direct drive of the C.I. drum, plate and anilox mandrels by AC servo motors controlled by digital drives
360° adjustment of longitudinal register
SERVO DRIVE – XG
Tight Mechanical Tolerance with Direct Drive Mandrel
IMPROVED XG STEPPER ACCESS
XG-LR 8-COLOR PRESS
Print deck open for sleeve change
Print deck closed for printing
Plate Sleeve Removal
Anilox Sleeve Removal
OPTIONAL SLEEVE EJECTORS
Plate Sleeve Ejector
Anilox Sleeve Ejector