Series
F3 SeriesGearmotor / Reducer
Concentric Hollow Shaft and Concentric Solid Shaft
D1
■Gearmotor / Gearmotor with Brake / Water-resistant, Outdoor (IP65) Gearmotor / Gearmotor with Brake Model and Type Designation 0.1kW‒0.4kWModel and Type Designation 0.75kW‒2.2kWModel and Type Designation 0.75kW‒2.2kWConcentric Hollow Shaft Standard Model Lineup Indoor TypeConcentric Hollow Shaft Standard Model Lineup Water-resistant TypeConcentric Solid Shaft Standard Model Lineup Indoor TypeConcentric Hollow Shaft 3-Phase Performance TableConcentric Solid Shaft 3-Phase Performance TableConcentric Hollow Shaft 3-Phase Outer Dimension DiagramConcentric Solid Shaft 3-Phase Outer Dimension Diagram
■1-Phase Gearmotor / Gearmotor with BrakeConcentric Hollow Shaft 1-Phase Performance TableConcentric Hollow Shaft 1-Phase Outer Dimension Diagram
■Reducer (Double Shaft Type)Concentric Hollow Shaft Model and Type Designation Concentric Hollow Shaft Standard Model LineupConcentric Hollow Shaft Performance TableConcentric Hollow Shaft Outer Dimension Diagram
■S-Type Reducer (Designated Motor Attachable Type)Concentric Hollow Shaft Model and Type Designation Concentric Hollow Shaft Standard Model LineupConcentric Hollow Shaft Performance TableConcentric Hollow Shaft Outer Dimension Diagram
P.P.P.P.P.P.P.P.P.P.
P.P.
P.P.P.P.
P.P.P.P.
D4D5D6D8D9D10D14D18D22D34
D42D44
D50D51D54D56
D62D63D66D68
IE3 (Premium Efficiency)IE1 (Standard Efficiency)
F3
D2
SeriesF3
GearmotorGearmotor with BrakeWater-resistant, OutdoorGearmotorGearmotor with Brake
Model and Type DesignationStandard Model Lineup
D3
3-Phase0.1kWー2.2kW
Class B
Direct Start
Totally enclosed fan-cooled (totally enclosed only for 0.1kW without brake)
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication (Maintenance Free)
New JIS Key (JIS 1301-1996 Standard) Note) Key materials are included with the Concentric Solid Shaft Type.
S43C
Aluminium Die-cast (Frame No. 50: Aluminium Casting, Frame No. 55: Cast Iron)
-10℃‒+40℃ (Note)
85% Max. (Without Any Dew Condensation)
1,000m Max.
Indoors
Anion Painting, Acrylic Paint
Grey (Munsell code: 9B6/0.5)
No Restrictions in the Mounting Angle, Such as Horizontal, Vertical, Inclined, or Other Angles
100Wー400W
Class B
Capacitor Start(100W Capacitor operated)
Totally enclosed fan-cooled
1-Phase
Motor
Reducer
Ambient Conditions
Painting
Mounting Direction
Number of Phase
C a p a c i t y
Power Source
Insulation Classification
Starting Method
Protective Cooling Method
Number of Pole
R a t i n g
Reduction Method
Lubrication Method
Output Shaft
Output Shaft Material
Case Material
Ambient Temperature
Ambient Humidity
A l t i t u d e
Installation Location
Painting Method
Painting Color
Environment Well ventilated place free from corrosive gas, explosive gas, vapors and/or dust.
Note) 0℃‒40℃ for the S100 motor (capacitor operated)
Standard Voltage (3 rated)High Voltage (4 rated)
200V/50Hz、200V/60Hz、220V/60Hz380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz
Standard VoltageHigh Voltage
100V/50Hz、100V/60Hz200V/50Hz、200V/60Hz
Concentric Hollow Shaft and Concentric Solid Shaft
A
P
W
Blank
WZ
Z
PA
WA
: Standard Voltage With A Model Terminal Box
: High Voltage Without Terminal Box For 400V Brake Specifications *Excluding 50W
: High Voltage Without Terminal Box
: Standard Voltage Without Terminal Box
: High Voltage With Z Model Terminal Box (For Use with Models with a Brake Built-in Rectifier Type)
: Standard Voltage With Z Model Terminal Box (For Use with Models with a Brake Built-in Rectifier Type)
: High Voltage With A Model Terminal Box For 400V Brake Specifications *Excluding 50W
: High Voltage With A Model Terminal Box3-Phase : 200V/50Hz, 200V/60Hz, 220V/60Hz
E : Standard Voltage With E Model Terminal Box3-Phase : 200V/50Hz, 200V/60Hz, 220V/60Hz
3-Phase :380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz200V/50Hz, 200V/60Hz1-Phase :
WE : High Voltage With E Model Terminal Box3-Phase :380V/50Hz, 400V/50Hz, 400V/60Hz,
440V/60Hz
3-Phase : 380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz
3-Phase : 200V/50Hz, 200V/60Hz, 220V/60Hz
3-Phase : 380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz
3-Phase :200V/50Hz, 200V/60Hz, 220V/60Hz
1-Phase :100V/50Hz, 100V/60Hz
1-Phase :100V/50Hz, 100V/60Hz
3-Phase :200V/50Hz, 200V/60Hz, 220V/60Hz
3-Phase : 380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz
(Note) High Voltage with 200V brake specifications is "WA"
(Note) High Voltage with 200V brake specifications is "W"
Note 3)
Note 3)
PE : High Voltage With E Model Terminal Box For 400V Brake Specifications *Excluding 50W3-Phase : (Note) High Voltage with 200V brake specifications is "WE"
Indoor Specification Water-resistant, Outdoor Specification
Model and Type Designation F3 Series
Model andType Designation
D4
Series
F3
F3
F3①
S
F
S
Mount
②
25
32
45
FrameNumber
④
R
ShaftLocation
⑤
80
120
450
ReductionRatio
⑥
M
B
W
Motor Type
③
T010
T040
T020
Motor Capacity
⑦ ⑧
W
P
Option
⑨
A
Z
E
Terminal Box
⑩X
Auxiliary Mark
⑪AB
Spec. Designation
①Series Name
②Classification by Mount Form
④Frame No. and Diameter of Output Shaft
⑤Output Shaft Placement Marks
⑥Reduction Ratio
⑦Motor Capacity
⑩Auxiliary Mark
⑪Spec. Designation
F3
T010T020T040S100 200 400
5 : 1/5 - 1500 : 1/1500
Diameter of output shaft (inner diameter for Concentric Hollow Shaft type and outer diameter for Concentric Solid Shaft type)
MBJWVGH
SF
BlankX
: F3 Series(Concentric Hollow Shaft, Concentric Solid Shaft)
: 3-Phase 0.1kW: 3-Phase 0.2kW: 3-Phase 0.4kW: 1-Phase 100W (capacitor operated): 1-Phase 200W (capacitor operated): 1-Phase 400W (capacitor operated)
: Without Brake: With Brake: With Brake Manual Release Device (Option): With Water-resistant Motor (Output Shaft Material SUS420J2) IP65: With Water-resistant Brake (Output Shaft Material SUS420J2) IP65: With Outdoor Motor (Output Shaft Material S43C) IP65: With Outdoor Brake Motor (Output Shaft Material S43C) IP65
: Concentric Hollow Shaft: Concentric Solid Shaft
Terminal Box Positioning MarkPlease refer to the lists of specification marks on 〈page E40-E51〉 for details.
: Standard Specifications: Mark for Special Additional Specs
Hollow Shaft Solid Shaft
Blank L R T
With the output shaft protruding from the right when looking from the input shaft side ( )
With the output shaft protruding from the left when looking from the input shaft side ( )
With the output shafts protruding from both sides when looking from the input shaft side ( )
Gear Head
Motor
③Classification by Motor TypeOnly hollow shafts are available for Water-resistant and Outdoor Types.
Note)
⑧⑨Options・Power Supply Voltage(* Please inquire regarding other voltages/frequencies.)
・Terminal Box Please specify A or Z for indoor specifications.
A-Type Terminal Box is standard for 3-phase.Always add ""A"" as the suffix to the model.When the field is blank, there is no terminal box (lead type).Refer to the following pages for terminal box specifications.• Without Brake: Page E19• With Brake Motor: Page E25• Built-in Rectifier: Page E26-E30
Note 1)
1-phase with a terminal box can be acquired through special order.Refer to 〈pages E25〉 for more information.
Note 2)
Note 3)When an inverter is used, always provide instructions for "AC Switching (A)" (custom specification) when submitting an order.An inverter cannot be used with "AC Switching (B)" and "DC Switching".Refer to 〈pages E26, E27 and E52〉 for more information.This option is only available with 200V brake specifications.The option is not available on 400V brake specifications.
F3S Type (Concentric Hollow Shaft)F3F Type (Concentric Solid Shaft)
0.1kW-0.4kWF3 series 0.1kW‒0.4kW gearmotors and gearmotors with a brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Model andType Designation
D5
0.75kW-2.2kWF3 series 0.75kW‒2.2kW gearmotors and gearmotors with a brake are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
⑥Classification by Motor Type
⑦Motor Specs.
③Frame No. and Diameter of Output Shaft
④Output Shaft Material
⑤Reduction Ratio
⑧Motor Capacity
⑨Number of Phase
⑩Power Supply Voltage
⑪Standard
⑫Terminal Box
⑭Auxiliary Mark
⑮Spec. Designation
F3
Terminal Box Positioning Mark Please refer to the list of specification marks on 〈page E40-E51〉 for details
Built-in Rectifier Hardwiring Indication Mark Please refer to the list of specification marks on 〈page E28-E29〉 for details.
BlankX
NB2B4V2V4J2J4
TN
NW
T
081522
P
M5 : 1/5 - 450 : 1/450
Diameter of output shaft (inner diameter for Concentric Hollow Shaft type and outer diameter for Concentric Solid Shaft type)
SF
: F3 Series (Concentric Hollow Shaft, Concentric Solid Shaft)
: Standard Specifications: Mark for Special Additional Specs
: Without Brake: 200V Brake Specification: 400V Brake Specification: Water-resistant 200V Brake Specification: Water-resistant 400V Brake Specification: With Brake Manual Release Device (Option) 200V Brake Specification: With Brake Manual Release Mechanism (Option) 400V Brake Specification
E
: Japanese, European (CE Marking)
: Standard Voltage : High Voltage
: 3-Phase
: 3-Phase 0.75kW: 3-Phase 1.5kW: 3-Phase 2.2kW
: IE3 Efficiency (Premium Efficiency)W
: Concentric Hollow Shaft: Concentric Solid Shaft
For models with a brake, the brake lead wire is housed inside the terminal Box. Please refer to 〈page E25〉.
3-Phase 3Rated 200V/50Hz, 200V/60Hz, 220V/60Hz3-Phase 3Rated 380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz
Gear Head Type
Series
F3
F3
F3
①
S
F
S
Mount
②
45
32
45
FrameNumber
③
N
T
S
ShaftLocation
④
5
20
30
ReductionRatio
⑤
BrakeSpecs.
⑬
N
B4
N
Brake
Option
⑭
X
X
AuxiliaryMark
⑮
AA
T9HZ
Spec.Designation
⑫
T
T
E
TerminalBox
⑥
M
M
W
Motor Type
⑦
P
P
P
Motor Specs.
⑧
08
15
22
Capacity
⑨
T
T
T
Number ofPhase
⑩
N
W
N
Power SupplyVoltage
⑪
N
N
N
Standard
Motor Model
Hollow ShaftShaft Material Solid Shaft
─ ─ ─
L R T
S43C N
SUS420J2 S
⑬Brake SpecsNote) There are no 1.5kW or 2.2kW gearmotors with a brake.
IE3 (Premium Efficiency)
: T Model Terminal Box (Steel Plate): E Model Terminal Box (Aluminium)
: Induction Standard Motor (IP44): Induction Water-resistant Motor (IP65)
With the output shaft protruding from the left when looking from the input shaft side ( )
With the output shaft protruding from the right when looking from the input shaft side ( )
With the output shafts protruding from both sides when looking from the input shaft side ( )
D6
F3 series 0.75kW‒2.2kW gearmotors and gearmotors with a brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Series
F3
F3
F3①
S
F
S
Mount
②
45
55
55
FrameNumber
④
R
Shaft Location
⑤
80
120
100
ReductionRatio
⑥
M
B
W
Motor Type
③
075
150
220
Capacity
⑦ ⑧
W
P
Option
⑨E
TerminalBox
⑩X
X
AuxiliaryMark
⑪T9HZ
AA
Spec.Designation
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output Shaft
⑤Output Shaft Placement Marks
⑥Reduction Ratio
⑦Motor Capacity
⑩Auxiliary Mark
⑪Spec. Designation
F3
075150220
5 : 1/5 - 1500 : 1/1500
Diameter of output shaft (inner diameter for Concentric Hollow Shaft type and outer diameter for Concentric Solid Shaft type)
MBJWVGH
FS
BlankX
Blank
W
P
: F3 Series(Concentric Hollow Shaft, Concentric Solid Shaft)
: 3-Phase 0.75kW: 3-Phase 1.5kW: 3-Phase 2.2kW
Without Brake: With Brake: With Brake Manual Release Device (Option): With Water-resistant Motor (Output Shaft Material SUS420J2) IP65: With Water-resistant Brake (Output Shaft Material SUS420J2) IP65 Note) 0.75kW only: With Outdoor Motor (Output Shaft Material S43C) IP65: With Outdoor Brake Motor (Output Shaft Material S43C) IP65 Note) 0.75kW only
: Concentric Hollow Shaft: Concentric Solid Shaft
E : Standard Voltage E Model Terminal Box3-Phase : 200V/50Hz, 200V/60Hz, 220V/60Hz
Terminal Box Positioning MarkPlease refer to the lists of specification marks on 〈page E40-E51〉 for details.
WE: High Voltage E Model Terminal Box3-Phase : 380V/50Hz, 400V/50Hz, 400V/60Hz,
440V/60Hz
: Standard Specifications: Mark for Special Additional Specs
Hollow Shaft Solid Shaft
Blank L R T
With the output shaft protruding from the right when looking from the input shaft side ( )
With the output shaft protruding from the left when looking from the input shaft side ( )
With the output shafts protruding from both sides when looking from the input shaft side ( )
0.75kW-2.2kW IE1 (Standard Efficiency)
Gear Head
Motor
PE: High Voltage E Model Terminal Box3-Phase : 380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz(Note) High Voltage with 200V brake specifications is "WE"
⑧⑨Options・Power Supply Voltage (*Please inquire regarding other voltages/frequencies.)
Indoor Specification Water-resistant, Outdoor Specification Terminal Box
: High Voltage With Terminal Box For 400V Brake Specifications
: High Voltage With Terminal Box
: Standard Voltage With Terminal Box3-Phase :200V/50Hz, 200V/60Hz, 220V/60Hz
1-Phase :100V/50Hz, 100V/60Hz
1-Phase :100V/50Hz, 100V/60Hz
3-Phase :380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz
3-Phase :380V/50Hz, 400V/50Hz, 400V/60Hz, 440V/60Hz(Note) High Voltage with 200V brake specifications is "W"
Model and Type Designation F3 Series
Model andType Designation
F3S Type (Concentric Hollow Shaft)F3F Type (Concentric Solid Shaft)
Only hollow shafts are available for Water-resistant and Outdoor Types.
Note)
D7
Model andType Designation
4P Motor Capacity
Standard ModelLineup
D8
Standard Model LineupF3 Series F3S Type(Concentric Hollow Shaft)Indoor Type
F3S Type (Concentric Hollow Shaft) Model Lineup
Type FrameNumber Reduction Ratio
3-Phase 0.1kW
1-Phase 100WNote 1)
Note 2)
3-Phase 0.2kW
1-Phase 200W
Note 2)
3-Phase 0.4kW
1-Phase 400W
3-Phase 0.75kW
3-Phase 1.5kW
Note 2)
Note 2)
3-Phase 2.2kW
Gearmotor
Gearmotor with Brake
Gearmotor Equipped with Brake Manual Release Device
(Optional Specs.)
High reduction ratio (1/300 and above) is not available for 1-Phase 100W.A small frame no. type.The models enclosed with " " are the low torque type. Special care should be given to the allowable torque in the performance table.
Note 1)2)3)
Standard Model LineupStandard ModelLineup
Outdoor Gearmotor with
Brake
D9
Water-resistant Type
F3S Type (Concentric Hollow Shaft) Model Lineup
Type
Water-resistant Gearmotor
Water-resistant Gearmotor with
Brake
Outdoor Gearmotor
Water-resistant Gearmotor
Water-resistant Gearmotor with
Brake
4P Motor Capacity
3-Phase 0.1kW
3-Phase 0.2kW
3-Phase 0.4kW
3-Phase 0.75kW
3-Phase 1.5kW
3-Phase 2.2kW
Water-resistant Gearmotor
Note 1)
Note 1)
Note 1)
Note 1)
FrameNumber Reduction Ratio
A small frame no. type.The models enclosed with " " are the low torque type. Special care should be given to the allowable torque in the performance table.
Note 1)2)
F3F Type (Concentric Solid Shaft) Model Lineup
Standard ModelLineup Standard Model LineupF3 Series F3F Type(Concentric Solid Shaft)
D10
Indoor Type
Reduction RatioFrameNumber
4P Motor CapacityType Output Shaft
Positioning
Gearmotor
Gearmotor with Brake
Gearmotor Equipped with Brake Manual Release Device
(Optional Specs.)
3-Phase 0.1kW
Note 1)
Note 1)
Note 1)
Note 1)
3-Phase 0.2kW
3-Phase 0.4kW
3-Phase 0.75kW
3-Phase 1.5kW
3-Phase 2.2kW
A small frame no. type.The models enclosed with " " are the low torque type. Special care should be given to the allowable torque in the performance table.
Note 1)2)
Standard ModelLineup
D11
D12
F3Series
F3SType
TypeF3F
●Values in the parenthesis in the performance table / dimension diagram are the values of gearmotor with brake.●The output shaft rotation speed is the value corresponding to the motor synchronous speed and the nominal reduction ratio.●The key for the outout shaft is not attached to this model.●The areas shaded with in the performance table show that rotation occurs clockwise as viewed from the side with arrow Ⓐ in the diagram below if hardwired as shown on 〈page E18,E34〉 (normal rotation).●In the case of the Concentric Hollow Shaft, the L shaft rotates clockwise, and the R and T shafts rotate counterclockwise as viewed from the output shaft.
【Remarks】
A
D13
Performance Table / Dimension Diagram
GearmotorGearmotor with BrakeWater-resistant, OutdoorGearmotorGearmotor with Brake
L Shaft R Shaft T Shaft
Concentric Hollow Shaft and Concentric Solid Shaft
3-Phase
D14
0.1kW-0.4kW
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor TypeWater-resistant Type
Frequency RatedCurrent Frame
NumberReductionRatio
ActualReductionRatio
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Output ShaftAllowableThrust Load
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
*1/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/591/501/402/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/52/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.55060751001201502003006.37.59.412.51518.8253037.55060751001201502003005060751001201502003006.37.59.412.51518.8253037.5506075100120150200300506075100120150200300
7.59
11.3151822.53036456072901201441802403607.59
11.3151822.53036456072901201441802403606072901201441802403607.59
11.3151822.5303645607290120144180240360607290120144180240360
10198785949393125211613117.76.55.23.82.5184184169126105846755443327231714118.35.53327231714118.35.52702702702532111691331118867554433272317116755443327231711
98816649413225221813118.66.55.44.33.22.2184175140105877155463727241914129.274.627241914129.274.62702702702111751401119274554637272419149.2
554637272419149.2
10.31086543.22.62.11.61.31.10.790.660.530.390.2618.818.817.912.910.78.66.85.64.53.42.82.31.71.41.10.850.563.42.82.31.71.41.10.850.5627.627.627.625.821.517.213.611.396.85.64.53.42.82.31.71.16.85.64.53.42.82.31.71.1
108.36.754.23.32.62.21.81.31.10.880.660.550.440.330.2218.817.914.310.78.97.25.64.73.82.82.41.91.41.20.940.710.472.82.41.91.41.20.940.710.4727.627.627.621.517.914.311.39.47.55.64.73.82.82.41.91.40.945.64.73.82.82.41.91.40.94
260260260260260260190190185170160150135130120110100320320320320320315260250235215205190175165155140125170160150135130120110100370370370360360355315305290270260245220210195180155215205190175165155140125
25502550255025502550255018601860181016701570147013201270118010809803140314031403140314030902550245023002110201018601720162015201370123016701570147013201270118010809803630363036303530353034803090299028402650255024002160206019101760152021102010186017201620152013701230
N Kgf
65656565656548484643403834323028258080808080796563595451484441393531434038343230282593939390908978767368656155524845385451484441393531
637637637637637637471471451422392373333316294270244785785785785785775637613576527502466429405380342307422392373333316294270244912912912883883873767747711662637600539506475438375527502466429405380342307
P.D22P.D28
P.D22P.D28
P.D23P.D29
P.D24P.D30
P.D23P.D29
P.D22P.D28
P.D22P.D28
25
20
142017001720
0.610.540.54
506060
200200220
3-Phase0.1kW
142017101720
1.11.01.0
506060
200200220
3-Phase0.2kW
141016901710
2.11.81.8
506060
200200220
3-Phase0.4kW
30
25
20(Small Frame No.)
P.D22P.D28
25(Small Frame No.)
35
30
Standard ModelLineup
Gearmotor / Gearmotor with Brake 3-Phase Performance TableConcentric Hollow Shaft F3 Series (F3S Type)
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D13〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
D15
0.75kW-2.2kW
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor TypeWater-resistant Type
Frequency RatedCurrent Frame
NumberReductionRatio
ActualReductionRatio
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Output ShaftAllowableThrust Load
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
*1/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.55060751001201502003005060751001201502003006.37.59.412.51518.8253037.550607510012015020030050607510012015020030012.51518.8253037.5506075100120150200300
7.59
11.3151822.53036456072901201441802403606072901201441802403607.59
11.3151822.5303645607290120144180240360607290120144180240360151822.5303645607290120144180240360
554554554473395316249208166124104836352413121124104836352413121
126412641264947789631498416332249208166124104836341249208166124104836341
126411569267316094873663052441821521229161
5545545263953282632081731381048670524334251810486705243342518
1264126410497896585264163452762081731381048670523420817313810486705234
11569647716095084063052542031521261027651
56.556.556.548.340.332.225.421.216.912.7
10.68.56.45.34.23.22.112.710.68.56.45.34.23.22.112912912996.680.564.450.842.433.925.421.216.912.710.68.56.44.225.421.216.912.710.68.56.44.212911894.574.662.149.737.331.124.918.615.512.49.36.2
56.556.553.740.333.526.821.217.714.110.68.87.15.34.43.52.61.810.68.87.15.34.43.52.61.812912910780.567.153.742.435.228.221.217.714.110.68.87.15.33.521.217.714.110.68.87.15.33.511898.478.762.151.841.431.125.920.715.512.910.47.85.2
5305305304854854853553553553353253052802652502302002702602452202101951801551000920850765655655485485485485480455415400370340300335325305280265250230200765655655535535535485485485450420400360320
5190519051904750475047503480348034803280319029902740260024502250196026502550240021602060191017601520980090208330750064206420475047504750475047004460407039203630333029403280319029902740260024502250196075006420642052405240524047504750475044104120392035303140
N Kgf
130130130120120120898989848176706863585168656155524845382502302101901651651091091091091091091091069992828481767068635851190165165130130130109109109109106999282
1275127512751177117711778708708708217967476866696135675006626376005395064754383752452225620591863161816181067106710671067106710671067104096790080082179674768666961356750018631618161812751275127510671067106710671040967900800
P.D25P.D31
P.D24P.D30
P.D27P.D32
P.D26P.D32
P.D27P.D32
P.D24P.D30
45
35144017201740
3.23.02.9
506060
200200220
3-Phase0.75kW
145017401750
6.46.05.7
506060
200200220
3-Phase1.5kW
145017401750
8.88.47.9
506060
200200220
3-Phase2.2kW
55
P.D25P.D3145
35(Small Frame No.)
P.D23P.D29
30(Small Frame No.)
55
50
P.D25P.D3145
Standard ModelLineup
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D13〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
IE3 (Premium Efficiency)
D16
0.75kWー2.2kW IE1 (Standard Efficiency)
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
*1/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.55060751001201502003005060751001201502003006.37.59.412.51518.8253037.550607510012015020030050607510012015020030012.51518.8253037.5506075100120150200300
7.59
11.3151822.53036456072901201441802403606072901201441802403607.59
11.3151822.5303645607290120144180240360607290120144180240360151822.5303645607290120144180240360
554554554473395316249208166124104836352413121124104836352413121
126412641264947789631498416332249208166124104836341249208166124104836341
126411569267316094873663052441821521229161
5545545263953282632081731381048670524334251810486705243342518
1264126410497896585264163452762081731381048670523420817313810486705234
11569647716095084063052542031521261027651
56.556.556.548.340.332.225.421.216.912.7
10.68.56.45.34.23.22.112.710.68.56.45.34.23.22.112912912996.680.564.450.842.433.925.421.216.912.710.68.56.44.225.421.216.912.710.68.56.44.212911894.574.662.149.737.331.124.918.615.512.49.36.2
56.556.553.740.333.526.821.217.714.110.68.87.15.34.43.52.61.810.68.87.15.34.43.52.61.812912910780.567.153.742.435.228.221.217.714.110.68.87.15.33.521.217.714.110.68.87.15.33.511898.478.762.151.841.431.125.920.715.512.910.47.85.2
5305305304854854853553553553353253052802652502302002702602452202101951801551000920850765655655485485485485480455415400370340300335325305280265250230200765655655535535535485485485450420400360320
5190519051904750475047503480348034803280319029902740260024502250196026502550240021602060191017601520980090208330750064206420475047504750475047004460407039203630333029403280319029902740260024502250196075006420642052405240524047504750475044104120392035303140
130130130120120120898989848176706863585168656155524845382502302101901651651091091091091091091091069992828481767068635851190165165130130130109109109109106999282
1275127512751177117711778708708708217967476866696135675006626376005395064754383752452225620591863161816181067106710671067106710671067104096790080082179674768666961356750018631618161812751275127510671067106710671040967900800
P.D25P.D31
P.D24P.D30
P.D27P.D32
P.D26P.D32
P.D27P.D32
P.D24P.D30
45
35144017201740
3.23.02.9
506060
200200220
3-Phase0.75kW
145017401750
6.46.05.7
506060
200200220
3-Phase1.5kW
145017401750
8.88.47.9
506060
200200220
3-Phase2.2kW
55
P.D25P.D3145
35(Small Frame No.)
P.D23P.D29
30(Small Frame No.)
55
50
P.D25P.D3145
Standard ModelLineup
Gearmotor / Gearmotor with Brake 3-Phase Performance TableConcentric Hollow Shaft F3 Series (F3S Type)
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor TypeWater-resistant Type
Frequency RatedCurrent Frame
NumberReductionRatio
ActualReductionRatio
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Output ShaftAllowableThrust Load
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
N Kgf
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D13〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
D17
Standard ModelLineup
D18
0.1kWー0.4kW
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor Type
Frequency RatedCurrent
FrameNumber Reduction
Ratio
ActualReductionRatio
Note 1)2)3)
The allowable O.H.L. are the values in the central position of the output shaft.Please be sure to read the remarks stated on 〈page D13〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
*1/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/591/501/402/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/52/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.55060751001201502003006.37.59.412.51518.8253037.55060751001201502003005060751001201502003006.37.59.412.51518.8253037.5506075100120150200300506075100120150200300
7.59
11.3151822.53036456072901201441802403607.59
11.3151822.53036456072901201441802403606072901201441802403607.59
11.3151822.5303645607290120144180240360607290120144180240360
10198785949393125211613117.76.55.23.82.5184184169126105846755443327231714118.35.53327231714118.35.52702702702532111691331118867554433272317116755443327231711
98816649413225221813118.66.55.44.33.22.2184175140105877155463727241914129.274.627241914129.274.62702702702111751401119274554637272419149.2554637272419
149.2
10.31086543.22.62.11.61.31.10.790.660.530.390.2618.818.817.212.910.78.66.85.64.53.42.82.31.71.41.10.850.563.42.82.31.71.41.10.850.5627.627.627.625.821.517.213.611.396.85.64.53.42.82.31.71.16.85.64.53.42.82.31.71.1
108.36.754.23.32.62.21.81.31.10.880.660.550.440.330.2218.817.914.310.78.97.25.64.73.82.82.41.91.41.20.940.710.472.82.41.91.41.20.940.710.4727.627.627.621.517.914.311.39.47.55.64.73.82.82.41.91.40.945.64.73.82.82.41.91.40.94
2602602602602602601901901751601501401251201101009032032032032032031526026024522021019517516515514513016015014012512011010090370370365345345340315305285265250235210200185170150220210195175165155145130
255025502550255025502550186018601720157014701370123011801180980880314031403140314031403090255025502400216020601910172016201520142012701570147013701230118010809808803630363035803380338033303090299027902600245023002060196018101670147021602060191017201620152014201270
P.D35
P.D34
P.D36
P.D37
P.D36
P.D35
P.D34
22
18
142017001720
0.610.540.54
506060
200200220
3-Phase0.1kW
142017001720
1.11.01.0
506060
200200220
3-Phase0.2kW
141016901710
2.11.81.8
506060
200200220
3-Phase0.4kW
28
22
18(Small Frame No.)
P.D3522(Small Frame No.)
32
28
Standard ModelLineup
Gearmotor / Gearmotor with Brake 3-Phase Performance TableConcentric Solid Shaft F3 Series (F3F Type)
D19
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor Type
Frequency RatedCurrent Frame
NumberReductionRatio
ActualReductionRatio
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/51/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.5506075100120150200300506075100120150200300253037.5506075100120150200300506075100120150200300506075100120150200300
7.59
11.3151822.5303645607290120144180240360607290120144180240360303645607290120144180240360607290120144180240360607290120144180240360
5545545544733953162492081661241048363524131211241048363524131214984163322492081661241048363412492081661241048363413663052441821521229161
554554526395328263208173138104867052433425181048670524334251841634627620817313810486705234208173138104867052343052542031521261027651
56.556.556.548.340.332.225.421.216.912.710.68.56.45.34.23.22.112.710.68.56.45.34.23.22.150.842.433.925.421.216.912.710.68.56.44.225.421.216.912.710.68.56.44.237.331.124.918.615.512.49.36.2
56.556.553.740.333.526.821.217.714.110.68.87.15.34.43.52.61.810.68.87.15.34.43.52.61.842.435.328.221.217.714.110.68.87.15.33.5
21.217.714.110.68.87.15.33.531.125.920.715.512.910.47.85.2
530530495455455455340340335310295275255240225205180265250235210200185170150455455455440425395360345320290255310295275255240225205180450450450420390360330300
5190519048504460446044603330333032803040289027002500235022102010176026002450230020601960181016701470446044604460431041703870353033803140284025003040289027002500235022102010176044104410441041203820353032302940
P.D38
P.D37
P.D38
P.D38
40
32144017201740
3.23.02.9
506060
200200220
3-Phase0.75kW
145017401750
6.46.05.7
506060
200200220
3-Phase1.5kW
145017401750
8.88.47.9
506060
200200220
3-Phase2.2kW
40
P.D3732(Small Frame No.)
P.D3628(Small Frame No.)
40
Standard ModelLineup
0.75kW-2.2kW IE3 (Premium Efficiency)
Note 1)2)3)
The allowable O.H.L. are the values in the central position of the output shaft.Please be sure to read the remarks stated on 〈page D13〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
D20
0.75kW IE1 (Standard Efficiency)
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/51/601/501/401/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/51/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/601/501/401/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/51/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.5506075100120150200300506075100120150200300253037.5506075100120150200300506075100120150200300506075100120150200300
7.59
11.3151822.5303645607290120144180240360607290120144180240360303645607290120144180240360607290120144180240360607290120144180240360
5545545544733953162492081661241048363524131211241048363524131214984163322492081661241048363412492081661241048363413663052441821521229161
554554526395328263208173138104867052433425181048670524334251841634627620817313810486705234208173138104867052343052542031521261027651
56.556.556.548.340.332.225.421.216.912.710.68.56.45.34.23.22.112.710.68.56.45.34.23.22.150.842.433.925.421.216.912.710.68.56.44.225.421.216.912.710.68.56.44.237.331.124.918.615.512.49.36.2
56.556.553.740.333.526.821.217.714.110.68.87.15.34.43.52.61.810.68.87.15.34.43.52.61.842.435.328.221.217.714.110.68.8
7.15.33.521.217.714.110.68.87.15.33.531.125.920.715.512.910.47.85.2
530530495455455455340340335310295275255240225205180265250235210200185170150455455455440425395360345320290255310295275255240225205180450450450420390360330300
5190519048504460446044603330333032803040289027002500235022102010176026002450230020601960181016701470446044604460431041703870353033803140284025003040289027002500235022102010176044104410441041203820353032302940
P.D38
P.D37
P.D38
P.D38
40
32144017201740
3.23.02.9
506060
200200220
3-Phase0.75kW
145017401750
6.46.05.7
506060
200200220
3-Phase1.5kW
145017401750
8.88.47.9
506060
200200220
3-Phase2.2kW
40
P.D3732(Small Frame No.)
P.D3628(Small Frame No.)
40
Standard ModelLineup
Gearmotor / Gearmotor with Brake 3-Phase Performance TableConcentric Solid Shaft F3 Series (F3F Type)
Note 1)2)3)
The allowable O.H.L. are the values in the central position of the output shaft.Please be sure to read the remarks stated on 〈page D13〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor Type
Frequency RatedCurrent Frame
NumberReductionRatio
ActualReductionRatio
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
D21
Standard ModelLineup
D22
Outer DimensionDiagrams
Gearmotor / Gearmotor with BrakeConcentric Hollow Shaft F3 Series (F3S Type)
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
256.5302.5
6.5kg7.5kg
3-Phase 0.1kW3-Phase 0.2kW
Capacity Type A Weight12
Fig. Number
Note) 0.1kW does not have a fan cover.
F3SM-20-5~60-T010(W)AF3SM-20-5~30-T020(W)A
Indoor Specification With Brake
296.5319.5
8kg9kg
3-Phase 0.1kW3-Phase 0.2kW
Capacity Type (A) Weight12
Fig. NumberF3SB-20-5~60-T010(W,P)AF3SB-20-5~30-T020(W,P)A
The values within parentheses are of those with brake motors.
Indoor Specification With Brake
126.5128.5─
9.5kg10kg12kg
3-Phase 0.1kW3-Phase 0.2kW3-Phase 0.4kW
Capacity Type E Weight112
Fig. Number327.5332367
A87.595.5─
B135135─
C57.561─
DF3SB-25-80~240-T010(W,P)AF3SB-25-5~60-T020(W,P)AF3SB-25-5-30-T040(W,P)A
3939
77 78127
6
48.5
48.5
48.5
38.5
38.5
38.522.8
68.578.5
97 (φ135)
117
47.5(87.5)
A(A)
(125.5)
37 37 28□70
92
64 64When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
962424
Protective capF3S-20(attachment)
(200 )48
13 13
2 2
φ29
φ20H8 φ20H8
φ29φ53h7 φ53h7
Flange surface Flange surface
4-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6
(57.5)
A(A)
B
C
DE
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
A(A)
39 39Protective capF3S-20
A(A)
78.5(95.5)64.5(61)
132(128.5)
135
Flange surfaceFlange surface
Frame No. 20Fig.1
Small Frame No. TypeFig.2
(attachment)
Flange surface
Frame No. 25Fig.1
Small Frame No. TypeFig.2
Flange surface Flange surface
Protective capF3S-25(attachment)
Flange surfaceFlange surface
Protective capF3S-25(attachment)
Indoor Specification Without Brake
─132─
8kg8.5kg10.5kg
3-Phase 0.1kW3-Phase 0.2kW3-Phase 0.4kW
Capacity Type E Weight112
Fig. Number287.5315347.5
A─78.5─
B─135─
C─64.5─
D
Note) 0.1kW does not have a fan cover.
F3SM-25-80~240-T010(W)AF3SM-25-5~60-T020(W)AF3SM-25-5-30-T040(W)A
D23
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
A(A)
141
84.569.5
140
A(A)
Protective capF3S-30
When the protectivecap is attached.
When the protectivecap is attached.
Flange surfaceFlange surface
Indoor Specification Without Brake
354.5360417.5389.5
10kg11.5kg18.5kg15kg
3-Phase 0.2kW3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
Capacity Type A Weight1234
Fig. NumberF3SM-30-80~240-T020(W)AF3SM-30-5~60-T040(W)AF3S30N5~30-MP08TN(W)NTNF3SM-30-5~30-075(W)
Flange surface
116
58 48
15910191
5848
31
58 48
33.3
8
A(A)227.5(237.5)
96 88
135
□156
1245833
17
φ75h7φ44
φ30H8
3317
2
φ75h7φ44
φ30H8
2
4-M10×P1.5
40.5
2515.5
4-M10×P1.5
7
53 53
7
4-φ8.64-φ10.5
40.5
(82)(82)
120106
80
A(A)When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface
Frame No. 30Fig.1
Fig.2
Small Frame No. TypeFig.3
Small Frame No. TypeFig.4
Protective capF3S-30(attachment)
Flange surface Flange surface
(attachment)
Protective capF3S-30
(attachment)
Protective capF3S-30
Flange surface Flange surface
(attachment)
Indoor Specification With Brake
371.5379.5427.5396.5
11.5kg13g20.5kg17kg
3-Phase 0.2kW3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
Capacity Type A Weight1234
Fig. NumberF3SB-30-80~240-T020(W,P)AF3SB-30-5~60-T040(W,P)AF3S30N5~30-MP08TN(W)NTB2(B4)F3SB-30-5~30-075(W,P)
D24
Outer DimensionDiagrams
Gearmotor / Gearmotor with BrakeConcentric Hollow Shaft F3 Series (F3S Type)
When the protectivecap is attached.
When the protectivecap is attached.
136
6856
5668
Flange surface
434.5(444.5)
105117
1856856
10
22
202038
14238 66
2
φ85h7φ49
φ35H8
2
227.5(237.5)
96 88
135
□15638.3φ85h7φ49
φ35H8
6262
77
3018
4-φ12.5
48
4-φ10.6
48
80
138124
When the protectivecap is attached.
When the protectivecap is attached.
4-M12×P1.754-M12×P1.75
(95) (95)
136
68 56
5668
Flange surface
105117
1856856
10
37.5
98.5119.5
499(524)276.5(301.5)
142
125 88
□17838.3
30
6262124
77
18
4-φ12.5
48
4-M12×P1.75
4-φ10.6
Flange surface
48
138
(95)(95)
80
4-M12×P1.75
38
20
142
20
38 66
2 2
φ85h7φ49
φ35H8
φ85h7φ49
φ35H8
φ20
When the protectivecap is attached.
When the protectivecap is attached.
Protective capF3S-35(attachment)
When the protectivecap is attached.
When the protectivecap is attached.
Frame No. 35Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
When the protectivecap is attached.
When the protectivecap is attached.
The values within parentheses are of those with brake motors.
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surface
Protective capF3S-35(attachment)
Protective capF3S-35(attachment)
Protective capF3S-35(attachment)
Protective capF3S-35(attachment)
Flange surface
Indoor Specification Without Brake
12345
15kg21kg28kg17.5kg24.5kg
3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】
Capacity Fig. Number WeightTypeF3SM-35-80~240-T040(W)AF3S35N5~60-MP08TN(W)NTNF3S35N5~30-MP15TN(W)NTNF3SM-35-5~60-075(W)F3SM-35-5~30-150(W)
Indoor Specification With Brake
12345
17kg23kg31kg19.5kg27.5kg
3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE33-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】
Capacity Fig. Number WeightTypeF3SB-35-80~240-T040(W,P)AF3S35N5~60-MP08TN(W)NTB2(B4)F3S35N5~30-MP15TN(W)NTB2(B4)F3SB-35-5~60-075(W,P)F3SB-35-5~30-150(W,P)
D25
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
─178192───
28.5kg35.5kg42kg25kg32kg35kg
3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 2.2kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】3-Phase 2.2kW【IE1】
Capacity Type E Weight122344
Fig. NumberF3S45N80~240-MP08TN(W)NTNF3S45N5~60-MP15TN(W)NTNF3S45N5~30-MP22TN(W)NTNF3SM-45-80~240-075(W)F3SM-45-5~60-150(W)F3SM-45-5~30-220(W)
─178192───
DC─276.5310─110.5111.5
B519544.5578491507532
A
Indoor Specification With Brake
─178192───
30.5kg38.5kg45kg27kg35kg38kg
3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 2.2kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】3-Phase 2.2kW【IE1】
Capacity Type E Weight122344
Fig. NumberF3S45N80~240-MP08TN(W)NTB2(B4)F3S45N5~60-MP15TN(W)NTB2(B4)F3S45N5~30-MP22TN(W)NTB2(B4)F3SB-45-80~240-075(W,P)F3SB-45-5~60-150(W,P)F3SB-45-5~30-220(W,P)
─142153───
D─125158───
C─301.5335─132132
B529569.5603498528.5553.5
A
174
87
48.8
69
6987
A(A)
16718587
6914
227.5(237.5)19.5
103119.5
96 88
135
□156
272
Flange surface
168506850
26
2
φ100h7φ64
φ45H8
26
φ100h7
2
φ64
φ45H8
7575
7
5023
4-φ20.5
73
4-φ17.5
73
(108) (108)
80
164150
7
When the protectivecap is attached.
When the protectivecap is attached.
4-M20×P2.54-M20×P2.5
Flange surfaceFlange surface
A(A)
B
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
A(A)
174
7387
87 73
A(A)33235
148134
1473
87
98.5115
φ20
D
C 88
□E48.8φ100h7φ64
φ45H8
168
5026
685026
2 2
φ100h7φ64
φ45H8
75Flange surface77
75
4-φ16.5
4-M16×P2.0
634023
4-φ14
63
(108) (108)
80
164150
4-M16×P2.0
Protective capF3S-45
(attachment)
B
Fig.1
Fig.2
Fig.3
Fig.4
Frame No. 45
Flange surface
When the protectivecap is attached.
When the protectivecap is attached.
Flange surfaceFlange surface
Flange surface Flange surface
Flange surface
Protective capF3S-45
(attachment)
Protective capF3S-45
(attachment)
Protective capF3S-45
(attachment)
D26
Outer DimensionDiagrams
Gearmotor / Gearmotor with BrakeConcentric Hollow Shaft F3 Series (F3S Type)
Frame No. 50
The values within parentheses are of those with brake motors.
43304
102 17014
212
106
106
121137.3
φ20
3-M4
53.8
21
88
□192
153
158
Flange surface
90
90
657(682)
118 186
29
φ110h7φ74
φ50H8
φ110h7φ74
φ50H8
2 2
172
62 555529
(120)(120)
168
59
4019
4-φ14
80
15477
77 77
Flange surfaceFlange surface
4-φ16.5 4-φ16.5
4-M16×P2.04-M16×P2.04-M16×P2.04-M16×P2.0
59
40 19
310(335)
Indoor Specification Without Brake
51kg
44kg
3-Phase 2.2kW【IE3】
3-Phase 2.2kW【IE1】
CapacityType Weight
1
2
Fig. Number
F3S50N40~60-MP22TN(W)NTN
F3SM-50-40~60-220(W)
Indoor Specification With Brake
54kg
47kg
Type Weight
1
2
Fig. Number
F3S50N40~60-MP22TN(W)NTB2(B4)
F3SB-50-40~60-220(W,P)
φ186
133
89111.5(132)
106
10690
90
53.8212
1725555 62
29 29
179.5
4-φ16.5
14
304
118102 170
186
611(632.5)
(250 )
φ20
121137.3
77
7777
154
120 120
168
φ74 φ74
φ50H8 φ50H8
φ110h7 φ110h7
2 2
4-φ14
4-M16×P2.0 4-M16×P2.059 59
86
82 3-M4
Fig.1
Fig.2
When the protectivecap is attached.
When the protectivecap is attached.
Protective capF3S-5055
(attachment)
When the protectivecap is attached.
When the protectivecap is attached.
Flange surfaceFlange surface
Protective capF3S-5055
(attachment)
D27
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
89.5kg
98kg
86kg
91kg
3-Phase 1.5kW【IE3】
3-Phase 2.2kW【IE3】
3-Phase 1.5kW【IE1】
3-Phase 2.2kW【IE1】
CapacityType Weight
178
192
─
─
E
F3S55N80~240-MP15TN(W)NTN
F3S55N80~120-MP22TN(W)NTN
F3SM-55-80~240-150(W)
F3SM-55-80~120-220(W)
Indoor Specification With Brake
92.5kg
101kg
89kg
94kg
178
192
─
─
3-Phase 1.5kW【IE3】
3-Phase 2.2kW【IE3】
3-Phase 1.5kW【IE1】
3-Phase 2.2kW【IE1】
CapacityType WeightE
142
153
─
─
D
142
153
─
─
D
125
158
─
─
C
125
158
─
─
C
276.5
310
110.5
111.5
B
301.5
335
132
132
B
635
668.5
597.5
622.5
A
660
693.5
619
644
A
1
1
2
2
Fig. Number
1
1
2
2
Fig. Number
F3S55N80~240-MP15TN(W)NTB2(B4)
F3S55N80~120-MP22TN(W)NTB2(B4)
F3SB-55-80~240-150(W,P)
F3SB-55-80~120-220(W,P)
Flange surface
Flange surface
(143) (143)
8200
8
100 100
4-φ17.54-φ20.5 4-φ20.5
4-M20×P2.5 4-M20×P2.5
5021.5
71.5 71.5
50 21.5
216
φ120h7φ79
φ55H8
φ120h7φ79
φ55H8
22
220
3232
61 98 61
1694 198
116 220336 22.5
108
108
130
130
260
A(A)
149169.5
3-M4
142
125 88
□178
Flange surface
59.3
φ25
276.5(301.5)
88
100100
200
143 143
Flange surface Flange surface216
Protective capF3S-5055
(attachment)
4-φ20.5 4-φ17.5
4-M20×P2.5 4-M20×P2.571.5 71.5
2206161 98
32 32
φ79
φ55H8
φ120h7 φ79
φ55H8
φ120h7
2 2
A(A)
B
Frame No. 55Fig.1
Fig.2
When the protectivecap is attached.
When the protectivecap is attached.
Protective capF3S-5055
(attachment)
When the protectivecap is attached.
When the protectivecap is attached.
D28
Leg Mount Type Water-resistant, Outdoor Gearmotor / Water-resistant, Outdoor Gearmotor with Brake
Concentric Hollow Shaft F3 Series (F3S Type)
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
6.5kg7.5kg
3-Phase 0.1kW3-Phase 0.2kW
Capacity Type Weight12
Fig. NumberF3SW(G)-20-5~60-T010(W)EF3SW(G)-20-5~30-T020(W)E
Frame No. 25
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
287.5314.5346
159140─
8kg8.5kg10.5kg
3-Phase 0.1kW3-Phase 0.2kW3-Phase 0.4kW
Capacity Type A B105.586.5─
C95.576.5─
D─61─
E Weight112
Fig. Number
Note) 0.1kW does not have a fan cover.
F3SW(G)-25-80~240-T010(W)EF3SW(G)-25-5~60-T020(W)EF3SW(G)-25-5-30-T040(W)E
Indoor/Water-resistant Specification With Brake
339364.5404
159140─
9.5kg10kg12kg
3-Phase 0.1kW3-Phase 0.2kW3-Phase 0.4kW
Capacity Type (A) B105.586.5─
C95.576.5─
D─61─
E
─128.4─
F
─128.5─
F Weight112
Fig. NumberF3SW(G)-25-80~240-T010(W)EF3SW(G)-25-5~60-T020(W)EF3SW(G)-25-5-30-T040(W)E
108.5
48.5
48.5
38.5
38.522.897
127
6
48.538.5 68.5
78.5
256.5(308)
962424 48
13 13
2 2
φ29
φ20H8 φ20H8
φ29φ53h7 φ53h7
3939
77 7892
64 64When the protectivecap is attached.
When the protectivecap is attached.
Protective capF3S-20(attachment)
Flange surface Flange surface
37 37
4-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6
28□80
Note) 0.1kW does not have a fan cover.
Indoor/Water-resistant Specification With Brake
8kg9kg
3-Phase 0.1kW3-Phase 0.2kW
Capacity Type Weight12
Fig. NumberF3SV(H)-20-5~60-T010(W,P)EF3SV(H)-20-5~30-T020(W,P)E
(A)A
CB
D
EF
When the protectivecap is attached.
When the protectivecap is attached.
Protective capF3S-25(attachment)
1182727 64
14 14
φ39
φ25H8
φ66h7 φ39
φ25H8
φ66h7
2 2
53.5
53.5 43.5
43.528.3107
Protective capF3S-25(attachment)
4-M10×P1.5
4-φ10.5 4-φ8.6
39.5 39.569.5
140
7 75050
79 79
Flange surface Flange surface100114
8
53.543.5 76.5
86.5
A(A)
140
φ141
28□80
114.5
4-M10×P1.5
Frame No. 20Fig.1
Small Frame No. TypeFig.2
Flange surfaceFlange surface
When the protectivecap is attached.
When the protectivecap is attached.
Protective capF3S-20(attachment)
Fig.1
Small Frame No. TypeFig.2
Flange surface Flange surface
When the protectivecap is attached.
When the protectivecap is attached.
D29
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
354358.5417.5388
180159──
10kg11.5kg18.5kg15kg
Capacity Type A B
122101──
C
11091──
D
4648──
E Weight1123
Fig.Number
F3SW(G)-30-80~240-T020(W)EF3SW(G)-30-5~60-T040(W)EF3S30N5~30-WP08TN(W)NENF3SW(G)-30-5~30-075(W)E
Indoor/Water-resistant Specification With Brake
404416.5487.5457.5
180159──
11.5kg13kg20.5kg17kg
3-Phase 0.2kW3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
Capacity Type (A) B
122101──
C
11091──
D
4648──
E
4648──
F
4648──
4648──
G
4648──
108.5114.5──
H
108.5114.5──
135141──
I
135141──
4-φ12.54-φ10.5──
J
4-φ12.54-φ10.5──
4-M12×P1.754-M10×P1.5
──
K
4-M12×P1.754-M10×P1.5
──
4-φ10.64-φ8.6──
L
4-φ10.64-φ8.6──
45.540.5──
M
45.540.5──
6169.5──
N
6169.5──
128.5140──
O
128.5140──
Weight1123
Fig.Number
F3SV(H)-30-80~240-T020(W,P)EF3SV(H)-30-5~60-T040(W,P)EF3S305~30-WP08TN(W)NEV2(V4)F3SV(H)-30-5~30-075(W,P)E
3-Phase 0.2kW3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
F G H I J K L M N O
φI
H
8
B58E D
C
A(A)
58
58G
F33.3116
1243333 58
17 17
2 2
φ44
φ30H8
φ75h7φ44
φ30H8
φ75h7
Protective capF3S-30(attachment)
7 7106120
82 82When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface
M M
K K
J L
5353
ON
28□80
1243333 58
17 17
φ44
φ30H8
φ75h7 φ44
φ30H8
φ75h7
2 2
58
58 48
4833.3116
4-φ8.6
Protective capF3S-30(attachment)
7 75353
82 82When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface106120
8
5848 91
101
A(A)
159
φ162
28□80
126.5
4-M10×P1.5
4-φ10.5
40.5 40.578
82
159
4-M10×P1.5
Flange surfaceFlange surface
Protective capF3S-30(attachment)
(82)When the protectivecap is attached.
(82)When the protectivecap is attached.
1207106
7
5353
4-M10×P1.54-M10×P1.5
4-φ8.6
40.5
2515.5
40.5
4-φ10.5
φ75h7φ44
φ30H8
2
φ75h7φ44
φ30H8
2
12433 58 33
1717
116 33.3
8
130.5
□156
□8028
99
A(A)227.5(297.5)
31159
58 1019148
58
58
48
48
Flange surface
Frame No. 30Fig.1
Small Frame No. TypeFig.2
Small Frame No. TypeFig.3
D30
Leg Mount Type Water-resistant, Outdoor Gearmotor / Water-resistant, Outdoor Gearmotor with Brake
Concentric Hollow Shaft F3 Series (F3S Type)
Outer DimensionDiagrams
Frame No. 35
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
15kg21kg28kg17.5kg24.5kg
3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】
CapacityType Weight
12345
Fig.Number
F3SW(G)-35-80~240-T040(W)EF3S35S(N)5~60-WP08TN(W)NENF3S35S(N)5~30-WP15TN(W)NENF3SW(G)-35-5~60-075(W)EF3SW(G)-35-5~30-150(W)E
Indoor/Water-resistant Specification With Brake
17kg23kg19.5kg
3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase0.75kW【IE1】
CapacityType Weight
124
Fig.Number
F3SV(H)-35-80~240-T040(W,P)EF3S35S(N)5~60-WP08TN(W)NEV2(V4)F3SV(H)-35-5~60-075(W,P)E
φ141
114.5
10
2226854 140
154
417(475)
28□80
68
6854
54
38.3136φ49
φ35H8
φ85h7φ49
φ35H8
φ85h7
2 2
1423838 66
20 20 Protective capF3S-35(attachment)
7 76262
124138
95 95When the protectivecap is attached.
When the protectivecap is attached.Flange surface Flange surface
58 58
69.5
4-M16×P2 4-M16×P2
4-φ16.5
φ20
119.598.5
1423838 66
20 20
φ49
φ35H8
φ85h7 φ49
φ35H8
φ85h7
2 2
68
68 56
5638.3136
Protective capF3S-35(attachment)
7 76262
95 95When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface124138
10
6856 105
117
461.5185
φ186
137.5
28□80
4-M12×P1.75
4-φ12.5
48 4886
179.5
4-M12×P1.75
4-φ10.6
φ162
126.5
□80 28
10
185
6856 105
117
405(474.5)
68
6856
56
38.3136
1423838 66
20 20
2 2
φ49
φ35H8
φ85h7φ49
φ35H8
φ85h7
Protective capF3S-35(attachment)
7 7
6262
124138
48 48
78159
4-M12×P1.75 4-M12×P1.75
95 95When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface
4-φ12.5 4-φ10.6
4-M12×P1.75
Flange surface
Protective capF3S-35(attachment)
Flange surface
(95)When the protectivecap is attached.
(95)When the protectivecap is attached.
1387124
7
62 62
4-φ10.6
4-M12×P1.75
4848
3018
4-φ12.5
142
38 66 382020
φ85h7φ49
φ35H8
φ85h7φ49
φ35H8
22 Flange surface
□156
130.5
□8028
99
434.5(504.5)22185
68 11710556
10
136
68
68
38.3
56
56
227.5(297.5)
□178
56
Flange surface
10
137.5
128 □8028
φ20
499276.537.5185
68 117
119.598.5
10556
38.3
56
68
68
136
68
Flange surface
Protective capF3S-35(attachment)
Flange surface
(95)When the protectivecap is attached.
(95)When the protectivecap is attached.
1387124
7
6262
4-φ10.64-φ12.5
4-M12×P1.754-M12×P1.75
4848
3018
20 20
14238 66 38
φ85h7φ49
φ35H8
φ85h7φ49
φ35H8
22
Fig.1
Fig.2
Small Frame No. TypeFig.3
Fig.4
Small Frame No. TypeFig.5
D31
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
519544.5578489.5507532
─276.5310───
28.5kg35.5kg42kg25kg32kg35kg
3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 2.2kW【IE3】3-Phase 0.75kW【IE1】3-Phase1.5kW【IE1】3-Phase 2.2kW【IE1】
CapacityType A B
─128161───
C─137.5148.5───
D─178192───
E Weight122344
Fig. NumberF3S45S(N)80~240-WP08TN(W)NENF3S45S(N)5~60-WP15TN(W)NENF3S45S(N)5~30-WP22TN(W)NENF3SW(G)-45-80~240-075(W)EF3SW(G)-45-5~60-150(W)EF3SW(G)-45-5~30-220(W)E
Indoor/Water-resistant Specification With Brake
589559
─
─
30.5kg27kg
3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
CapacityType A B
─
─
C─
─
D─
─
E Weight13
Fig. NumberF3S45S(N)80~240-WP08TN(W)NEV2(V4)F3SV(H)-45-80~240-075(W,P)E
1685050 68
26 26
φ64
φ45H8
φ100h7φ64
φ45H8
φ100h7
2 2
φ162
φ20
14
272
8769 167
185
A
87
8769
69
48.8174 φ160
103119.5
Protective capF3S-45(attachment)
7 7
7575
150164
73 73
78
4-M20×P2.5 4-M20×P2.5
108 108When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface
4-φ20.5 4-φ17.5
159
28□80
(A)
126.5
168
50 68 502626
φ100h7φ64
φ45H8
φ100h7φ64
φ45H8
22
□156
130.5
99 □8028
103119.5
1416769
19.5272A(A)
Flange surface
48.8
69
69
87
87
174
φ20
87 185
4-φ20.5
75 75
164
(108)When the protectivecap is attached.
(108)When the protectivecap is attached.
Flange surface
4-φ17.5
4-M20×P2.5 4-M20×P2.5
73 73
5023
7150
7Flange surface
Protective capF3S-45(attachment)
227.5(297.5)
φ186
137.5
□8028
110.5
87
8773
73
48.8174
14
235
8773 134
148
A(A)
φ20
98.5115
φ179
When the protectivecap is attached.
When the protectivecap is attached.
4-φ16.5
Flange surface
Protective capF3S-45(attachment)
Flange surface
4-M16×P2.04-M16×P2.0
(108)When the protectivecap is attached.
(108)When the protectivecap is attached.
1647150
7
7575
4-φ14
634023
63
D
□E
C □8028
98.5115
Flange surface
A(A)B33235
87 14813473
14
174
φ20
73
73
87
87
48.8φ100h7φ64
φ45H8
φ100h7φ64
φ45H8
50 68 502626
2 2
168
Frame No. 45Fig.1
Fig.2
Fig.3
Fig.4Flange surfaceFlange surface
Protective capF3S-45(attachment)
D32
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
51kg
44kg
3-Phase 2.2kW【IE3】
3-Phase 2.2kW【IE1】
CapacityType Weight
1
2
Fig. Number
F3S50S(N)40~60-WP22TN(W)NEN
F3SW(G)50-40~60-220(W)E
The values within parentheses are of those with brake motors.
Indoor/Water-resistant Specification Without Brake
89.5kg
98kg
86kg
91kg
3-Phase 1.5kW【IE3】
3-Phase 2.2kW【IE3】
3-Phase 1.5kW【IE1】
3-Phase 2.2kW【IE1】
CapacityType Weight
178
192
─
─
E
F3S55S(N)80~240-WP15TN(W)NEN
F3S55S(N)80~120-WP22TN(W)NEN
F3SW(G)-55-80~240-150(W)E
F3SW(G)-55-80~120-220(W)E
137.5
148.5
─
─
D
128
161
─
─
C
276.5
310
─
─
B
635
668.5
597.5
622.5
A
1
1
2
2
Fig. Number
Leg Mount Type Water-resistant, Outdoor Gearmotor / Water-resistant, Outdoor Gearmotor with Brake
Concentric Hollow Shaft F3 Series (F3S Type)
Outer DimensionDiagrams
φ110h7φ74
φ50H8
φ110h7φ74
φ50H8
2 2
172
55 62 55
29 29
657
3-M4
□192
161 □8028
φ20
121137.3
Flange surface
31043304118 186 21
17010214
212
90
90
106
106
53.8
148.54-φ16.5
Flange surface
Flange surface
Protective capF3S-5055(attachment)
(120)When the protectivecap is attached.
(120)When the protectivecap is attached.
1687154
7
4-φ144-φ16.5
4-M16×P2.04-M16×P2.0
594019
5940 19
77 77
260
3-M4
□E
D
C □80 28φ25
149169.5
A
116 220
16
108
108
59.3
Flange surface
B22.5336
19894
130
130
Flange surfaceFlange surface
Protective capF3S-5055(attachment)
(143)When the protectivecap is attached.
(143)When the protectivecap is attached.
8200
8
100 100
4-φ17.54-φ20.5 4-φ20.5
4-M20×P2.5 4-M20×P2.5
5021.5
71.5 71.5
50 21.5
216
φ120h7φ79
φ55H8
φ120h7φ79
φ55H8
22
220
3232
61 98 61
φ186
□80 28
110.5
106
106
90
90
53.8212
1725555 62
29 29
179.5
4-φ16.5
14
304
118
102 170
186
611
φ20
121137.3
77
7777
154
120 120When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface168
Protective capF3S-5055(attachment)
φ74 φ74
φ50H8 φ50H8
φ110h7 φ110h7
2 2
4-φ14
4-M16×P2.0 4-M16×P2.059 59
86
82
137.5
3-M4
336
116
94
16
198
220
A
130
130
108
108
59.3260
φ25
149169.5
φ186
□80 28
110.5
137.5
88
100100
200
143 143When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface216
Protective capF3S-5055(attachment)
4-φ20.5 4-φ17.5
4-M20×P2.5 4-M20×P2.571.5 71.5
2206161 98
32 32
φ79
φ55H8
φ120h7 φ79
φ55H8
φ120h7
2 23-M4
Frame No. 50Fig.1
Fig.2
Frame No. 55Fig.1
Fig.2
D33
Outer DimensionDiagrams
D34
Outer DimensionDiagrams
Gearmotor / Gearmotor with BrakeConcentric Solid Shaft F3 Series (F3F Type)
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
6.5kg7.5kg
3-Phase 0.1kW3-Phase 0.2kW
CapacityType Weight
12
Fig. Number
Note) 0.1kW does not have a fan cover.
F3FM-18 -5~60-T010(W)AF3FM-18 -5~30-T020(W)A
Indoor Specification With Brake
8kg9kg
3-Phase 0.1kW3-Phase 0.2kW
CapacityType Weight
12
Fig. Number
L Shaft R Shaft T Shaft
127
20.5
48.5
48.5
48.5
38.5
38.5
38.5
6
68.578.5
97 φ135
117
47.5(87.5)
256.5(296.5)
28□70
(200 )3939 7
27273030
778 3838
37 37
154
φ53h7
φ18h6φ18h6
3939 7
2730
77838
37 37
123
φ53h7
φ18h6
3939 7
2730
778 38
37 37
(57.5) (57.5) (57.5)
φ53h7
φ18h6
(144.5)134
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
4-M10×P1.5 4-M10×P1.5 4-M10×P1.5 4-M10×P1.5 4-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6 4-φ10.5 4-φ8.6 4-φ10.5 4-φ8.6
LRT
LRT
Frame No. 18Fig.1
Small Frame No. TypeFig.2
L Shaft R Shaft T Shaft
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
F3FB-18 -5~60-T010(W,P)AF3FB-18 -5~30-T020(W,P)A
LRT
LRT
D35
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
8.5kg9.5kg11.5kg
3-Phase 0.1kW3-Phase 0.2kW3-Phase 0.4kW
CapacityType Weight
57.564.5─
H
155162.5─
G
─165.5─
F
─78.5─
E
95.576.5─
D
105.5
86.5
─
C
159
140
─
B
287.5
315
347.5
A
1
1
2
Fig. Number
Note) 0.1kW does not have a fan cover.
F3FM-22 -80~240-T010(W)A
F3FM-22 -5~60-T020(W)A
F3FM-22 -5~30-T040(W)A
Indoor Specification With Brake
3-Phase 0.1kW3-Phase 0.2kW3-Phase 0.4kW
CapacityType
F3FB-22 -80~240-T010(W,P)A
F3FB-22 -5~60-T020(W,P)A
F3FB-22 -5~30-T040(W,P)A
10kg
11kg
13kg
Weight
57.5
61
─
H
155
159
─
G
165.5
165.5
─
F
87.5
95.5
─
E
95.5
76.5
─
D
105.5
86.5
─
C
159
140
─
B
327.5
332
367
A
1
1
2
Fig. Number
A(A)B
CD
E
F
H H
G
H
A(A)
LRT
LRT
LRT
LRT
LRT
LRT
Frame No. 22Fig.1
Small Frame No. TypeFig.2
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
Flangesurface
Flangesurface
Flangesurface
FlangesurfaceFlangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
D36
Outer DimensionDiagrams
Gearmotor / Gearmotor with BrakeConcentric Solid Shaft F3 Series (F3F Type)
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
11kg13kg20kg16.5kg
3-Phase 0.2kW3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
CapacityType Weight
1234
Fig. Number
F3FM-28 -80~240-T020(W)A
F3FM-28 -5~60-T040(W)A
F3F28 5~30-MP08TN(W)NTN
F3FM-28 -5~30-075(W)
Indoor Specification With Brake
12.5kg14.5kg22kg18.5kg
3-Phase 0.2kW3-Phase 0.4kW
3-Phase 0.75kW【IE3】3-Phase 0.75kW【IE1】
CapacityType Weight
1234
Fig. Number
F3FB-28 -80~240-T020(W,P)A
F3FB-28 -5~60-T040(W,P)A
F3F28 5~30-MP08TN(W)NTB2(B4)
F3FB-28 -5~30-075(W,P)
8
31
135
□156
8896
417.5(427.5)31159 227.5(237.5)
58 10148 91
116
58
58
48
48
4540
40.525
15.5
4-φ10.5
40.5
φ75h7
4540
80
212
φ75h7
4-M10×P1.54-M10×P1.5
10653 5353 537 7
φ28h6φ28h6
4-φ8.6
45
φ28h6
40
φ75h7
40.525
15.5
4-φ10.5
5353 77
166
40.5
φ75h7
80
4-M10×P1.5
106 53
4-φ8.6
4-M10×P1.5
φ75h7
40.525
15.5
4-φ10.5
4-M10×P1.5
40.5
φ28h6
φ75h7
4540
184
4-M10×P1.5
4-φ8.6
80
16610653
53 537 7
φ75h7
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
Frame No. 28Fig.1
Fig.2
Small Frame No. TypeFig.3
Small Frame No. TypeFig.4
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface Flange
surfaceFlangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
FlangesurfaceFlangesurface
Flangesurface
Flange surface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
D37
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
17kg22.5kg29.5kg19kg26kg
3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】
CapacityType Weight
12345
Fig. Number
F3FM-32 -80~240-T040(W)A
F3F32 5~60-MP08TN(W)NTN
F3F32 5~30-MP15TN(W)NTN
F3FM-32 -5~60-075(W)
F3FM-32 -5~30-150(W)
Indoor Specification With Brake
19kg24.5kg32.5kg21kg29kg
3-Phase 0.4kW3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】
CapacityType Weight
12345
Fig. Number
F3FB-32 -80~240-T040(W,P)A
F3F32 5~60-MP08TN(W)NTB2(B4)
F3F32 5~30-MP15TN(W)NTB2(B4)
F3FB-32 -5~60-075(W,P)
F3FB-32 -5~30-150(W,P)
434.5(444.5)
68 117
35
22185
8896
135
Flange surface
136
56
56 10 □156
56 105
68
68
62 627 7
50
φ85h7
18
4-φ12.5
30
48
50
48
250
80
12463 63
5555
φ32h6
4-M12×P1.75
φ85h7
φ32h6
4-M12×P1.75
4-φ10.6
4-φ12.5
φ85h7
φ32h6
φ85h7
203
62 627 7
19412463
5055
4-M12×P1.75
4-M12×P1.75
4-φ10.6
1830
4848
8018
30
φ85h7
φ32h6
4-φ12.5
φ85h7
4-M12×P1.75
6262 77
194124 63
5055
4-M12×P1.75
80
48 48203
4-φ10.6
227.5(237.5)
214
4-φ10.6
194124 63
62 627 75550
φ85h7
φ32h6
φ85h7
4-φ12.5
48483018
80
194
214
4-M12×P1.754-M12×P1.75
48483018
80
φ85h7
φ32h6
4-φ12.5
φ85h74-φ10.6
1246362 627 7
5550
□178136
56
5610
142
88125
φ20
98.5119.568
68
499(524)37.5185 276.5(301.5)
68 11756 105
35
250
φ85h7
φ32h6
12463 6362 627 7
5550
5550
4-M12×P1.754-M12×P1.75
4-φ12.5
4848
301880
φ85h7
φ32h6
4-φ10.6
4-M12×P1.754-M12×P1.75
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
Frame No. 32Fig.1
Fig.2
Small Frame No. TypeFig.3
Fig.4
Small Frame No. TypeFig.5
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flangesurface
Flange surface
Flange surface Flange surface
Flangesurface
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surface
Flange surface
Flange surface
Flange surface
Flange surface
Flange surface
Flange surface
D38
Outer DimensionDiagrams
Gearmotor / Gearmotor with BrakeConcentric Solid Shaft F3 Series (F3F Type)
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
30.5kg
38.5kg
45kg
27kg
35kg
38kg
3-Phase 0.75kW【IE3】3-Phase 1.5kW【IE3】3-Phase 2.2kW【IE3】3-Phase 0.75kW【IE1】3-Phase 1.5kW【IE1】3-Phase 2.2kW【IE1】
CapacityWeight
─
237
244
─
─
─
F
F3F40 80~240-MP08TN(W)NTN
F3F40 5~60-MP15TN(W)NTN
F3F40 5~30-MP22TN(W)NTN
F3FM-40 -80~240-075(W)
F3FM-40 -5~60-150(W)
F3FM-40 -5~30-220(W)
Indoor Specification With Brake
32.5kg
41.5kg
48kg
29kg
38kg
41kg
3-Phase 0.75kW【IE3】
3-Phase 1.5kW【IE3】
3-Phase 2.2kW【IE3】
3-Phase 0.75kW【IE1】
3-Phase 1.5kW【IE1】
3-Phase 2.2kW【IE1】
Capacity
Type
Type Weight
─
237
244
─
─
─
─
178
192
─
─
─
E
─
178
192
─
─
─
─
142
153
─
─
─
D
─
142
153
─
─
─
─
125
158
─
─
─
C
─
125
158
─
─
─
─
276.5
310
─
─
─
B
─
301.5
335
─
─
─
519
544.5
578
491
508
533
A
529
569.5
603
498
528.5
553.5
1
2
2
3
4
4
Fig. Number
1
2
2
3
4
4
Fig. Number
F3F40 80~240-MP08TN(W)NTB2(B4)
F3F40 5~60-MP15TN(W)NTB2(B4)
F3F40 5~30-MP22TN(W)NTB2(B4)
F3FB-40 -80~240-075(W,P)
F3FB-40 -5~60-150(W,P)
F3FB-40 -5~30-220(W,P)
A(A)
5023
4-φ20.5
73
4-M20×P2.5
φ100h7
73
Flange surface
80
4-φ17.5
φ100h7
φ40h6
23015073
75 757 76560
4-M20×P2.5
φ100h7
60Flange surface
Flange surface
230150 73
75 757 765
φ100h7
φ40h6
4-φ17.5
50237373
804-M20×P2.5
4-φ20.5
4-M20×P2.5
60
5023
4-M20×P2.5
φ100h7
φ40h6
73
80
29615073 73
75 757 765 65
60
φ100h7
φ40h6
4-φ20.5
73
4-M20×P2.5
4-φ17.5
174
12
103119.5 135
□156
19.5272A(A)
87 18569 167
43
8896
87
87
69
69
φ20
227.5(237.5)
4-φ14
23015073
75 757 76560
φ100h7
φ40h6
φ100h7
4-φ16.5
804023
63 63244
4-M16×P24-M16×P2
150 73
4-φ14
4-M16×P2
230
75 757 76560
φ100h7
804023
63 63F
φ40h6
φ100h7
4-M16×P2
4-φ16.5
98.5115
88C
□E
D
174
φ20Flange surface
87
87 12
87 148
A(A)33235 B
73 13443
73
73
4-φ16.5
φ40h6
29615073 73
75 757 765 6560 60
4-M16×P24-M16×P2
φ100h7
φ40h6
80
6363
4023
φ100h74-φ14
φ186
133
89111.5(132)
1287
8773
73
43
174
63 63
86
82
φ20
98.5115
77 7575150296
φ100h7
φ40h6φ40h6
6065
6065
7373
4-M16×P24-M16×P2 4-M16×P2
4-φ16.5
2358773 134
148 (250 )
4-φ14
63 63
86
82
77 7575150
φ100h7
φ40h6
6065
73
4-M16×P2 4-M16×P2
4-φ16.5 4-φ14
63 63
86
82
77 7575150
φ100h7
φ40h6
6065
73
4-M16×P2
4-φ16.5 4-φ14
234.5230
241230 A(A)
FEDCBA
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
LRT
Frame No. 40Fig.1
Fig.2
Fig.3
Fig.4
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
L Shaft R Shaft T Shaft
Flange surface Flange surface Flange surface
Flange surface
Flange surfaceFlangesurface
Flangesurface
Flangesurface Flange
surfaceFlangesurface
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surfaceFlange surface Flange surface
D39
Outer DimensionDiagrams
D40
GearmotorGearmotor with BrakePerformance Table / Dimension Diagram F3
Series
F3SType
1-Phase●Values in the parenthesis in the performance table / dimension diagram are the values of gearmotor with brake.●The output shaft rotation speed is the value corresponding to the motor synchronous speed and the nominal reduction ratio.●The key for the outout shaft is not attached to this model.●The areas shaded with in the performance table show that rotation occurs clockwise as viewed from the side with arrow Ⓐ in the diagram below if hardwired as shown on 〈page E18〉 (normal rotation).●1-Phase 100W uses a capacitor-operated motor, making starting torque 60‒80%.
【Remarks】
D41
Concentric Hollow Shaft
D42
100W-400W
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D41〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
*1/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/591/501/402/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/5
6.37.59.412.51518.8253037.55060751001201502003006.37.59.412.51518.8253037.55060751001201502003006.37.59.412.51518.8253037.5506075100120150200300
7.59
11.3151822.53036456072901201441802403607.59
11.3151822.53036456072901201441802403607.59
11.3151822.5303645607290120144180240360
10198785949393125211613117.76.55.23.82.5184184169126105846755443327231714118.35.5270270270253211169133111886755443327231711
98816649413225221813118.66.55.44.33.22.2184175140105877155463727241914129.274.62702702702111751401119274554637272419149.2
10.31086543.22.62.11.61.31.10.790.660.530.390.2618.818.817.912.910.78.66.85.64.53.42.82.31.71.41.10.850.5627.627.627.625.821.517.213.611.396.85.64.53.42.82.31.71.1
108.36.754.23.32.62.21.81.31.10.880.660.550.440.330.2218.817.914.310.78.97.25.64.73.82.82.41.91.41.20.940.710.4727.627.627.621.517.914.311.39.47.5
5.64.73.82.82.41.91.40.94
260260260260260260190190185170160150135130120110100320320320320320315260250235215205190175165155140125370370370360360355315305290270260245220210195180155
25502550255025502550255018601860181016701570147013201270118010809803140314031403140314030902550245023002110201018601720162015201370123036303630363035303530348030902990284026502550240021602060191017601520
656565656565484846434038343230282580808080807965635954514844413935319393939090897876736865615552484538
637637637637637637471471451422392373333316294270244785785785785785775637613576527502466429405380342307912912912883883873767747711662637600539506475438375
P.D45
P.D44
P.D46
P.D46
P.D46
P.D45
25
20
14001700
1.71.9
5060
100100
1-Phase100W
14201700
5.14.5
5060
100100
1-Phase200W
14401730
8.77.9
5060
100100
1-Phase400W
30
25
35
30Standard ModelLineup
Gearmotor / Gearmotor with Brake 1-Phase Performance TableConcentric Hollow Shaft F3 Series (F3S Type)
CapacityMotor
Specification
PowerSupply
V Hz A r/min 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
Indoor Type
Frequency RatedCurrent Frame
NumberReductionRatio
ActualReductionRatio
Output ShaftRotation Speed
Output ShaftAllowable Torque
Output ShaftAllowable O.H.L.
Output ShaftAllowableThrust Load
Outer Dimension Diagram
r/min N・m Kgf・m N Kgf
RatedRotationSpeed
N Kgf
D43
Standard ModelLineup
D44
Outer DimensionDiagrams
1-Phase Gearmotor / Gearmotor with BrakeConcentric Hollow Shaft F3 Series (F3S Type)
Frame No. 20
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
8kg1-Phase 0.1kW
CapacityType Weight
F3SM-20-5~60-S100(W)
3939
77 78127
6
48.5
48.5
48.5
38.5
38.5
38.522.8
68.578.5
97 φ135
296.5
125.5
37 37
9296
2424
(attachment)
57.5
4813 13
2 2
φ29
φ20H8 φ20H8
φ29φ53h7 φ53h7
100 (200 )
64 64
Flange surface
4-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6
7kg
Weight
Indoor Specification With Brake
Type
F3SB-20-5~60-S100(W)
When the protectivecap is attached.
When the protectivecap is attached.
Flange surface
Protective capF3S-20
D45
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
10kg
13kg
1-Phase 100W
1-Phase 200W
CapacityType Weight
F3SM-25-80~240-S100(W)
F3SM-25-5~60-200(W)
9kg
11.5kg
Weight
1
2
Fig. Number
Indoor Specification With Brake
Type
F3SB-25-80~240-S100(W)
F3SB-25-5~60-200(W)
1182727 64
14 14
φ39 φ39
φ25H8 φ25H8
φ66h7 φ66h7
2 2
8
φ135
53.5
53.5
43.5
43.528.3107
15953.543.5 95.5
105.5
327.5
100 (200 )
77
5050100
(attachment)
Protective capF3S-25
126.5
39.5 39.5
57.5
114
4-M10×P1.5 4-M10×P1.5
79 79
4-φ10.5 4-φ8.6
Flange surface Flange surface
When the protectivecap is attached.
When the protectivecap is attached.
Flange surface Flange surface
(attachment)
Protective capF3S-25
When the protectivecap is attached.
When the protectivecap is attached.
Frame No. 25Fig.1
Fig.2
1
2
Fig. Number
D46
Outer DimensionDiagrams
1-Phase Gearmotor / Gearmotor with BrakeConcentric Hollow Shaft F3 Series (F3S Type)
The values within parentheses are of those with brake motors.
The values within parentheses are of those with brake motors.
Indoor Specification Without Brake
23.5kg1-Phase 400W
CapacityType Weight
F3SM-35-80~240-400(W) 21kg
Weight
Indoor Specification With Brake
Type
F3SB-35-80~240-400(W)
Indoor Specification Without Brake
14.5kg
20kg
1-Phase 200W
1-Phase 400W
CapacityType Weight
F3SM-30-80~240-200(W)
F3SM-30-5~60-400(W)
13kg
17.5kg
Weight
1
2
Fig. Number
1
2
Fig. Number
Indoor Specification With Brake
Type
F3SB-30-80~240-200(W)
F3SB-30-5~60-400(W)
Frame No. 30Fig.1
Fig.2
Flange surface Flange surface
Flange surface Flange surface
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
When the protectivecap is attached.
(attachment)
Protective capF3S-30
(attachment)
Protective capF3S-30
Frame No. 35
Flange surface Flange surface
(attachment)
Protective capF3S-35
When the protectivecap is attached.
When the protectivecap is attached.
D47
Outer DimensionDiagrams
D48
F3Series
Reducers(Double Shaft Type)Model and Type DesignationStandard Model Lineup
D49
Concentric Hollow Shaft
Equivalent of 0.1kW-2.2kW
Hypoid Gear and Helical Gear
Grease Lubrication (Maintenance Free)
New JIS Key (JIS B 1301-1996 Standard) Note) Key materials are included.
S43C
Aluminium Die-cast (Frame No. 50: Aluminium Casting, Frame No. 55: Cast Iron)
-10℃-+40℃
85% Max. (Without Any Dew Condensation)
1,000m Max.
Indoor
Anion Painting, Acrylic Paint
Grey (Munsell code: 9B6/0.5)
No Restrictions in the Mounting Angle, Such as Horizontal, Vertical, Inclined, or Other Angles
Reducer
Ambient Conditions
Painting
Mounting Direction
Reduction Method
Lubrication Method
Output Shaft
Output Shaft Material
Case Material
Ambient Temperature
Ambient Humidity
Altitude
Installation Location
Painting Method
Painting Color
Environment Well ventilated place free from corrosive gas,explosive gas, vapors and/or dust.
The Capacity of 4P Equivalent Motor
Model and Type Designation F3 Series F3S Type(Concentric Hollow Shaft)
Model andType Designation
F3 series Double Shaft Type Reducers are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output Shaft
⑤Reduction Ratio
⑥Equivalent Capacity
⑦⑧Options
⑩Spec. Designation
F3
Blank
Blank
X
Blank
010
020
040
075
150
220
5 : 1/5 - 240 : 1/240
Output Shaft Diameter (Inner Diameter)
Blank
S
: F3 Series(Concentric Hollow Shaft)
: Standard Specifications
: Standard Specifications
: Mark for Special Additional Specs.
: Standard Specifications
: 0.1kW or equiv.
: 0.2kW or equiv.
: 0.4kW or equiv.
: 0.75kW or equiv.
: 1.5kW or equiv.
: 2.2kW or equiv.
: Without Motor(Double Shaft Type)
: Concentric Hollow Shaft
No option is available.
⑨Auxiliary Mark
Note 1) Please note that F3 series Double Shaft Type Reducers have the F3S type (Hollow Shaft) only, and do not have the F3F type (Solid Shaft).
(Note 1)
Spec. Designation is not shown as a part of the product model name on the nameplate. It is shown in the Spec. Designation column on the nameplate.
D50
Series
F3 S
F3 S
Mount Motor Type
30
45
FrameNumber
50
240
ReductionRatio
040
075
Capacity
① ② ④ ⑤③ ⑥ ⑦ ⑧ ⑨ ⑩
Option Terminal Box
X
Auxiliary Mark Spec. Designation
Note)
Standard ModelLineup
Type 4P Motor Capacity
FrameNumber Reduction Ratio
20
25
25
30
35
45
45
0.1kW
0.2kW
0.4kW
0.75kW
1.5kW
2.2kW
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/80 1/100 1/120 1/160 1/200 1/240
1/80 1/100 1/120 1/160 1/200 1/240
1/80 1/100 1/120 1/160 1/200 1/240
1/80 1/100 1/120 1/160 1/200 1/240
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/5 1/7.5 1/10
50 1/40 1/50 1/60
55 1/80 1/100 1/120
1/12.5 1/15 1/20 1/25 1/30
1/50 1/60
F3S Type (Hollow Shaft) Model Lineup
Reducer(Double Shaft Type)
Standard Model Lineup
30
35
45
1/80 1/100 1/120 1/160 1/200 1/24055
D51
The models enclosed with " " are the low torque type. Special care should be given to the allowable torque in the performance table.
Note
D52
F3F3S
Reducer(Double Shaft Type)Performance Table / Dimension Diagram
●The corresponding motor capacities are the values when using a 4-pole motor.
●The key for the outout shaft is not attached to this model.
【Remarks】
■Relation for Rotating Direction(As viewed from the side with arrow Ⓐ in the diagram below)The rotation directions shown by the arrows just show rotation in relation to input/output shafts, and do not limit rotation direction.
F3S Type 0.1kW~2.2kW 1/5~1/60Reduction RatioCapacity
F3S Type 0.1kW~0.75kW 1/80~1/240Reduction RatioCapacity
AA
D53
Concentric Hollow Shaft
Series
Type
D54
Standard ModelLineup
Double Shaft Type Performance TableConcentric Hollow Shaft F3 Series (F3S Type)
CapacityMotor
SpecificationN Kgf
Frame Number
ReductionRatio
ActualReduction Ratio(Fraction)
Output ShaftAllowable Torque Inpu(1500r/min)
OuterDimension Diagram
Output ShaftAllowable Thrust LoadAllowable O.H.L.
N KgfN・m Kgf・m Input Shaft Output Shaft Input Shaft Output Shaft
*1/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/591/501/402/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/5
10198785949393125211613117.76.55.23.82.5184184169126105846755443327231714118.35.5270270270253211169133111886755443327231711
10.31086543.22.62.11.61.31.00.790.660.530.390.2618.818.817.912.910.78.66.85.64.53.42.82.31.71.41.10.850.5627.627.627.625.821.517.213.611.396.85.64.53.42.82.31.71.1
196
196 20 P.D56
P.D5620
25
Equivalent of0.1kW
Equivalent of0.2kW
Equivalent of0.4kW
20
245 P.D572530
245 P.D562525
294 P.D573035
294 P.D573030
25502550255025502550255018601860181016701570147013201270118010809803140314031403140314030902550245023002110201018601720162015201370123036303630363035303530348030902990284026502550240021602060191017601520
260260260260260260190190185170160150135130120110100320320320320320315260250235215205190175165155140125370370370360360355315305290270260245220210195180155
637637637637637637471471451422392373333316294270244785785785785785775637613576527502466429405380342307912912912883883873767747711662637600539506475438375
656565656565484846434038343230282580808080807965635954514844413935319393939090897876736865615552484538
Equivalent of 0.1kW-0.4kW
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D53〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
D55
Standard ModelLineup
CapacityMotor
SpecificationN Kgf
Frame Number
ReductionRatio
ActualReduction Ratio(Fraction)
Output ShaftAllowable Torque Inpu(1500r/min)
OuterDimension Diagram
Output ShaftAllowable Thrust LoadAllowable O.H.L.
N KgfN・m Kgf・m Input Shaft Output Shaft Input Shaft Output Shaft
※1/240※1/200※1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
※1/240※1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
※1/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/51/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/5
554554554473395316249208166124104836352413121
126412641264947789631498416332249208166124104836341
126411569267316094873663052441821521229161
56.556.556.548.340.332.225.421.216.912.710.68.56.45.34.23.22.112912912996.680.564.450.842.433.925.421.216.912.710.68.56.44.212911894.574.662.149.737.331.124.918.615.512.49.36.2
392
392 40 P.D58
P.D5740
45
Equivalent of0.75kW
Equivalent of1.5kW
Equivalent of2.2kW
35
392 P.D594055
392 P.D584045
392 P.D594055
392 P.D584050
45 392 P.D5840
519051905190475047504750348034803480328031902990274026002450225019609800902083307500642064204750475047504750470044604070392036303330294075006420642052405240524047504750475044104120392035303140
5305305304854854853553553553353253052802652502302001000920850765655655485485485485480455415400370340300765655655535535535485485485450420400360320
1275127512751177117711778708708708217967476866696135675002452225620591863161816181067106710671067106710671067104096790080018631618161812751275127510671067106710671040967900800
1301301301201201208989898481767068635851250230210190165165109109109109109109109106999282190165165130130130109109109109106999282
Equivalent of 0.75kW-2.2kW
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D53〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
D56
Outer DimensionDiagrams
Reducer (Double Shaft Type)Concentric Hollow Shaft F3 Series (F3S Type)
The values within parentheses are of those with brake motors.
3.5kgEquivalent of 0.1kW
Capacity Type Weight
F3S-20-5~60-010
The values within parentheses are of those with brake motors.
5kg5kg
Equivalent of 0.1kWEquivalent of 0.2kW
Capacity Type Weight
4-φ8.6─
E
95.576.5
D
105.586.5
C
159140
B
239220.5
A
F3S-25-80~240-010F3S-25-5~60-020
Frame No. 20
962424 48
13 13
2 2
φ29
φ20H8 φ20H8
φ29φ53h7 φ53h7
3939
77 7892
64 64
(attachment)
Protective capF3S-20
Flange surface
37 374-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6
φ114.5
48.5
48.5
38.5
38.522.897
127
6
48.538.5 68.5
2522
13.5
78.5
208
φ115
φ12h6 4
When the protectivecap is attached.
When the protectivecap is attached.
Flange surface
Frame No. 25
1182727 64
14 14
φ39 φ39
φ25H8 φ25H8
φ66h7 φ66h7
2 2
77
5050100114
79 79
Flange surface
4-φ10.5
39.5 39.54-M10×P1.5 4-M10×P1.5
φ114.5
φ12h613.5
453.5
53.5
43.5
43.528.3107
8
B53.543.5 D
C
A
φ115
2522
E
Flange surface
When the protectivecap is attached.
When the protectivecap is attached.
(attachment)
Protective capF3S-25
D57
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
6.5kg
6kg
Equivalent of 0.2kWEquivalent of 0.4kW
Capacity Weight
45.5
40.5
P
4-φ10.6
4-φ8.6
O
4-M12×P1.75
4-M10×P1.5
N
4-φ12.5
4-φ10.5
M
13.5
17
L
4
5
K
114.5
127
J
12h6
15h6
I
22
27
H
25
30
G
115
128
F
46
48
E
110
91
D
122
101
C
180
159
B
260
258
A
F3S-30-80~240-020
F3S-30-5~60-040
9.5kg
8kg
Equivalent of 0.4kWEquivalent of 0.75kW
Capacity Type Weight
58
48
O
─
4-φ10.6
N
4-M16×P2
4-M12×P1.75
M
4-φ16.5
4-φ12.5
L
17
22.5
K
5
6
J
127
142
I
15h6
20h6
H
27
32
G
30
35
F
54
56
E
140
105
D
154
117
C
222
185
B
316.5
296.5
A
F3S-35-80~240-040
F3S-35-5~60-075
The values within parentheses are of those with brake motors.
Frame No. 30
1423838 66
20 20
2 2
φ49
φ35H8
φ85h7φ49
φ35H8
φ85h7
(attachment)
Protective capF3S-35
7 7
6262124138
O O
95 95When the protectivecap is attached.
When the protectivecap is attached.
Flange surface
L
M M
N
φH KJ
FG
10
B6856 D
C
A
φI
68
68E
E
38.3136
Flange surface
1243333 58
17 17
2 2
φ44
φ30H8
φ75h7φ44
φ30H8
φ75h7
7 7106120
82 82When the protectivecap is attached.
When the protectivecap is attached.
P P
M
N N
O
53538
B5848 D
C
A
58
58E
E
33.3116 φF φJ
φI LK
GHFlange surface Flange surface
(attachment)
Protective capF3S-30
Frame No. 35
Type
D58
Outer DimensionDiagrams
Reducer (Double Shaft Type)Concentric Hollow Shaft F3 Series (F3S Type)
The values within parentheses are of those with brake motors.
16.5kg
17kg
18kg
Equivalent of 0.75kWEquivalent of 1.5kWEquivalent of 2.2.kW
Capacity Type Weight
─
28
33
E
─
25h6
30h6
D
─
35
40
C
─
40
45
B
─
384.5
396.5
A
1
2
2
Fig. Number
F3S-45-80~240-075
F3S-45-5~60-150
F3S-45-5~30-220
The values within parentheses are of those with brake motors.
27kgEquivalent of 2.2.kW
Capacity Type Weight
F3S-50-40~60-220
1685050 68
26 26
φ64
φ45H8
φ100h7φ64
φ45H8
φ100h7
2 2
(attachment)
Protective capF3S-45
7 7
7575150164
73 734-M20×P2.5 4-M20×P2.5
108 108When the protectivecap is attached.
When the protectivecap is attached.
4-φ20.5 4-φ17.5
φ20
14
2728769 167
185
381
87
8769
69
48.8174103
119.5
φ20h622.5
6
3532
φ142
4-φ16.5
77
7777154
120 120When the protectivecap is attached.
When the protectivecap is attached.
Flange surface1681725555 62
29 29
φ74 φ74
φ50H8 φ50H8
φ110h7 φ110h7
2 2
4-φ14
4-M16×P2.0 4-M16×P2.059 59
106
10690
90
53.8212
14
304118102 170
186
475.5
φ20
121137.3
φ30h6 338
4540
3-M4
1685050 68
26 26
φ64
φ45H8
φ100h7φ64
φ45H8
φ100h7
2 2
(attachment)
Protective capF3S-45
7 7150164
63 63
7575
4-M16×P2.0 4-M16×P2.0
108 108When the protectivecap is attached.
When the protectivecap is attached.
4-φ16.5 4-φ14
87
8773
73
48.8174
14
2358773 134
148
A
φ20
98.5115
φD E
BC
φ165
8
Frame No. 45Fig.1
Fig.2
Flange surface Flange surface
Flange surface Flange surface
Flange surface
(attachment)
Protective capF3S-5055
Frame No. 50
D59
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
73kg
74kg
Equivalent of 1.5kWEquivalent of 2.2.kW
Capacity Type Weight
28
33
E
25h6
30h6
D
35
40
C
40
45
B
475
487
A
F3S-55-80~240-150
F3S-55-80~120-220
2206161 98
32 32
φ79
φ55H8
φ120h7 φ79
φ55H8
φ120h7
2 2
88
100100
200
143 143When the protectivecap is attached.
When the protectivecap is attached.
Flange surface216
(attachment)
Protective capF3S-5055
4-φ20.5 4-φ17.5
4-M20×P2.5 4-M20×P2.571.5 71.5φ25
149169.5
336
11694
16
B
C
198
220
A
130
130
108
108
59.3260
φD E8
3-M4
Flange surface
Frame No. 55
D60
F3Series
Equivalent of 0.1kW-2.2kW
Hypoid Gear and Helical Gear
Grease Lubrication (Maintenance Free)
New JIS Key (JIS B 1301-1996 Standard) Note) Key materials are included.
S43C
Aluminium Die-cast (Frame No. 50: Aluminium Casting, Frame No. 55: Cast Iron)
-10℃-+40℃
85% Max. (Without Any Dew Condensation)
1,000m Max.
Indoor
Anion Painting, Acrylic Paint
Grey (Munsell code: 9B6/0.5)
No Restrictions in the Mounting Angle, Such as Horizontal, Vertical, Inclined, or Other Angles
Reducer
Ambient Conditions
Painting
Mounting Direction
Reduction Method
Lubrication Method
Output Shaft
Output Shaft Material
Case Material
Ambient Temperature
Ambient Humidity
Altitude
Installation Location
Painting Method
Painting Color
Environment Well ventilated place free from corrosive gas,explosive gas, vapors and/or dust.
The Capacity of 4P Equivalent Motor
Concentric Hollow Shaft
S-Type Reducer(Designated Motor Attachable Type)
Model and Type DesignationStandard Model Lineup
D61
F3 series S Type Reducers are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output Shaft
⑤Reduction Ratio
⑥Equivalent Capacity
⑦⑧Options
⑩Spec. Designation
F3
Blank
X
Blank
010
020
040
075
150
220
5 : 1/5 - 240 : 1/240
Output Shaft Diameter (Inner Diameter)
S
S
: F3 Series(Concentric Hollow Shaft)
: Standard Specifications
: Mark for Special Additional Specs
: Standard Specifications
Blank : Standard Specifications
: 0.1kW or equiv.
: 0.2kW or equiv.
: 0.4kW or equiv.
: 0.75kW or equiv.
: 1.5kW or equiv.
: 2.2kW or equiv.
: Designated Motor Attachable Type (S-Type)
: Concentric Hollow Shaft
⑨Auxiliary Mark
Note 1) Please note that F3 series S-Type Reducers have the F3S type (Hollow Shaft) only, and do not have the F3F type (Solid Shaft).
(Note 1)
D62
Series
F3 S
F3 S
Mount Motor Type
30
45
FrameNumber
50
240
ReductionRatio
040
075
Capacity
① ② ④ ⑤③ ⑥ ⑦ ⑧ ⑨ ⑩
Option Terminal Box
X
Auxiliary Mark Spec. Designation
S
S
Model and Type Designation F3 Series F3S Type(Concentric Hollow Shaft)
Model andType Designation
Spec. Designation is not shown as a part of the product model name on the nameplate. It is shown in the Spec. Designation column on the nameplate.
Note)
S-Type Reducer
Type 4P Motor Capacity
FrameNumber Reduction Ratio
F3S Type (Hollow Shaft) Model Lineup
20
25
25
30
35
45
45
0.1kW
0.2kW
0.4kW
0.75kW
1.5kW
2.2kW
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/80 1/100 1/120 1/160 1/200 1/240
1/80 1/100 1/120 1/160 1/200 1/240
1/80 1/100 1/120 1/160 1/200 1/240
1/80 1/100 1/120 1/160 1/200 1/240
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/50 1/60
1/5 1/7.5 1/10 1/12.5 1/15 1/20 1/25 1/30 1/40
1/5 1/7.5 1/10
50 1/40 1/50 1/60
55 1/80 1/100 1/120
1/12.5 1/15 1/20 1/25 1/30
1/50 1/60
30
35
45
1/80 1/100 1/120 1/160 1/200 1/24055
D63
Standard ModelLineup
Standard Model Lineup
The models enclosed with " " are the low torque type. Special care should be given to the allowable torque in the performance table.
Note
D64
F3Series
F3SType
S-Type Reducer(Designated Motor Attachable Type)
Performance Table / Dimension Diagram
Concentric Hollow Shaft
D65
●Please refer to 〈page D53〉for the output shaft rotation direction in regard to input/output shaft rotation direction.●The values of output shaft allowable torque indicate the values during operation of a 4-pole motor.●If used with motors other than a 4-pole motor, the value with the torque correction coefficient on 〈page E54〉 multiplied to it is the rotation's output shaft allowable torque.●The key for the outout shaft is not attached to this model.
【Remarks】
D66
Equivalent of 0.1kWー0.4kW
CapacityMotor
SpecificationKgfN
FrameNumber
ReductionRatio
ActualReduction Ratio(Fraction)
Outer Dimension Diagram
Output ShaftAllowable Thrust Load
KgfN
Output ShaftAllowable O.H.L.
*1/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/591/501/402/591/251/201/152/251/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/5
P.D6825
P.D6820
Equivalent of0.1kW
P.D6930
P.D6825
P.D7035
P.D6930
Equivalent of0.2kW
Equivalent of0.4kW
108.36.754.23.32.62.21.81.31.10.880.660.550.440.330.2218.817.914.310.78.97.25.64.73.82.82.41.91.41.20.940.710.4727.627.627.621.517.914.311.39.47.55.64.73.82.82.41.91.40.94
10.31086543.22.62.11.61.31.10.790.660.530.390.2618.818.817.912.910.78.66.85.64.53.42.82.31.71.41.10.850.5627.627.627.625.821.517.213.611.396.85.64.53.42.82.31.71.1
98816649413225221813118.66.55.44.33.23.2184175140105877155463727241914129.274.62702702702111751401119274554637272419149.2
10198785949393125211613117.76.55.23.82.5184184169126105846755443327231714118.35.5270270270253211169133111886755443327231711
637637637637637637471471451422392373333316294270244785785785785785775637613576527502466429405380342307912912912883883873767747711662637600539506475438375
656565656565484846434038343230282580808080807965635954514844413935319393939090897876736865615552484538
25502550255025502550255018601860181016701570147013201270118010809803140314031403140314030902550245023002110201018601720162015201370123036303630363035303530348030902990284026502550240021602060191017601520
260260260260260260190190185170160150135130120110100320320320320320315260250235215205190175165155140125370370370360360355315305290270260245220210195180155
N・m Kgf・m50Hz 60Hz 50Hz 60Hz
Output ShaftAllowable Torque
Standard ModelLineup
S-Type Reducer Performance TableConcentric Hollow Shaft F3 Series (F3S Type)
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D53〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
D67
KgfNKgfN
*1/240*1/200*1/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/240*1/2001/1601/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
*1/1201/1001/801/601/501/401/301/251/201/151/12.51/101/7.51/5
1/2401/2001/1601/12019/18801/801/601/501/401/301/251/201/1519/2351/102/151/51/2401/2001/1601/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/51/1201/1001/801/601/501/401/301/251/201/1519/2351/102/151/5
P.D7145
P.D7035
P.D7255
P.D7145
P.D7255
P.D7250
P.D7145
Equivalent of0.75kW
Equivalent of1.5kW
Equivalent of2.2kW
56.556.553.740.333.526.821.217.714.110.68.87.15.34.43.52.61.812912910780.567.153.742.435.228.221.217.714.110.68.87.15.33.511898.478.762.151.841.431.125.920.715.512.910.47.85.2
56.556.556.548.340.332.225.421.216.912.710.68.56.45.34.23.22.112912912996.680.564.450.842.433.925.421.216.912.710.68.56.44.212911894.574.662.149.737.331.124.918.615.512.49.36.2
554554526395328263208173138104867052433425181264126410497896585264163452762081731381048670523411569647716095084063052542031521261027651
554554554473395316249208166124104836352413121126412641264947789631498416332249208166124104836341126411569267316094873663052441821521229161
1275127512751177117711778708708708217967476866696135675002452225620591863161816181067106710671067106710671067104096790080018631618161812751275127510671067106710671040967900800
1301301301201201208989898481767068635851250230210190165165109109109109109109109106999282190165165130130130109109109109106999282
519051905190475047504750348034803480328031902990274026002450225019609800902083307500642064204750475047504750470044604070392036303330294075006420642052405240524047504750475044104120392035303140
5305305304854854853553553553353253052802652502302001000920850765655655485485485485480455415400370340300765655655535535535485485485450420400360320
N・m Kgf・m50Hz 60Hz 50Hz 60Hz
Standard ModelLineup
Note 1)2)3)
The allowable O.H.L. are the values measured at the position of 20mm from the edge of output shaft.Please be sure to read the remarks stated on 〈page D53〉 regarding the rotation method of output shaft.The models marked with * are limited torque type. Be sure to refer to the allowable torque in the performance table.
CapacityMotor
Specification
FrameNumber
ReductionRatio
ActualReduction Ratio(Fraction)
Outer Dimension Diagram
Output ShaftAllowable Thrust Load
Output ShaftAllowable O.H.L.
Output ShaftAllowable Torque
Equivalent of 0.75kWー2.2kW
D68
Outer DimensionDiagrams
S-Type ReducerConcentric Hollow Shaft F3 Series (F3S Type)
The values within parentheses are of those with brake motors.
4kg0.1kW or equiv.
Capacity Type Weight
F3SS-20-5~60-010
The values within parentheses are of those with brake motors.
5.5kg
5.5kg
0.1kW or equiv.
0.2kW or equiv.
Capacity Type Weight
1
2
Fig. Number
F3SS-25-80~240-010
F3SS-25-5~60-020
Frame No. 20
Frame No. 25
962424 48
13 13
2 2
φ29
φ20H8 φ20H8
φ29φ53h7 φ53h7
3939
77 7892
64 64When the protectivecap is attached.
When the protectivecap is attached.
(attachment)
Protective capF3S-20
Flange surface
4-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6
37 37
48.5
48.5
38.5
38.522.897
127
6
48.538.5 68.5
78.5
194.58
4.5
φ110G75
10
φ130
φ160
S
Flange surface
φ11H7Depth33 (Standard S surface)
4-M8×P1.25Depth11 (Penetrated)
Fig.1
Fig.2
53.5
53.5
43.5
43.528.3107
8
15953.543.5 95.5
105.5
225.5
1182727 64
14 14
φ39 φ39
φ25H8 φ25H8
φ66h7 φ66h7
2 2
77
5050100
(attachment)
Protective capF3S-25
114
79 79
4-φ10.5
39.5 39.54-M10×P1.5 4-M10×P1.5
5
10
φ11H7Depth33 (Standard S surface)
4-M8×P1.25Depth11 (Penetrated)
84.5
φ110G7
φ130
φ160
S
4-φ8.6
When the protectivecap is attached.
When the protectivecap is attached.
Flange surfaceFlange surface
8
1182727 64
14 14
φ39 φ39
φ25H8 φ25H8
φ66h7 φ66h7
2 2
53.5
53.5
43.5
43.528.3107
77
5050100
(attachment)
Protective capF3S-25
114
79 79
Flange surface Flange surface
39.5 39.5
4-M10×P1.5 4-M10×P1.5
4-φ10.5
14053.543.5 76.5
86.5
207
4-M8×P1.25Depth11 (Penetrated)
8
4.5
5
10φ110G7
130
160φ
φ
S
φ11H7Depth33 (Standard S surface)
When the protectivecap is attached.
When the protectivecap is attached.
D69
Outer DimensionDiagrams
The values within parentheses are of those with brake motors.
7kg
7kg
0.2kW or equiv.
0.4kW or equiv.
Capacity Type Weight
1
2
Fig. Number
F3SS-30-80~240-020
F3SS-30-5~60-040
8
1805846 110
1221243333 58
17 17
φ44
φ30H8
φ75h7
58
5846
46
33.3116
2 2
φ44
φ30H8
φ75h7
(attachment)
Protective capF3S-30
7 7
5353106120
82 82When the protectivecap is attached.
When the protectivecap is attached.
45.5 45.54-M12×P1.75 4-M12×P1.75
4-φ12.5 4-φ10.6
246.5
5
10
φ11H7Depth33(Standard S surface)
84.5
φ110G7
130
160φ
φ
S
4-M8×P1.25Depth11 (Penetrated)
Flange surface Flange surface
Fig.1
Fig.2
8
1595848 91
101
235.5
58
5848
48
33.3116
1243333 58
17 17
2 2
φ44
φ30H8
φ75h7φ44
φ30H8
φ75h7
7 7106120
82 82When the protectivecap is attached.
When the protectivecap is attached.
40.5 40.54-M10×P1.5 4-M10×P1.5
4-φ10.5 4-φ8.6
5353
4-M8×P1.25Depth20
8
5
16
4.5
110G7
130
160
φ14H7Depth36(Standard S surface)
φφ
φ
S
Flange surface Flange surface
(attachment)
Protective capF3S-30
Frame No. 30
D70
Outer DimensionDiagrams
S-Type ReducerConcentric Hollow Shaft F3 Series (F3S Type)
10.5kg
17.5kg
0.4kW or equiv.
0.75kW or equiv.
Capacity Type Weight
1
2
Fig. Number
F3SS-35-80~240-040
F3SS-35-5~60-075
The values within parentheses are of those with brake motors.
Frame No. 35Fig.1
Fig.2
10
1856856 105
117
265.5
68
6856
56
38.3136
1423838 66
20 20
2 2
φ49
φ35H8
φ85h7φ49
φ35H8
φ85h7
7 7
6262124138
48 484-M12×P1.75 4-M12×P1.75
95 95When the protectivecap is attached.
When the protectivecap is attached.
4-φ12.5 4-φ10.6
4-M10×P1.5Depth23 (Penetrated)
9
6
21.5
4.5
φ130G7
165
200
φ19F7Depth42 (Standard S surface)
φ
φ
S
Flange surface Flange surface
(attachment)
Protective capF3S-35
10
2226854 140
154
294
68
6854
54
38.3136φ49
φ35H8
φ85h7φ49
φ35H8
φ85h7
2 2
1423838 66
20 20
(attachment)
Protective capF3S-35
7 7
6262124138
95 95When the protectivecap is attached.
When the protectivecap is attached.
58 584-M16×P2 4-M16×P2
4-φ16.5
8
5
16
4.5
φ110G7
φ130φ160
φ14F7Depth36 (Standard S surface)
S
Flange surface Flange surface
4-M8×P1.25Depth20
D71
Outer DimensionDiagrams
17.5kg
19kg
20kg
0.75kW or equiv.
1.5kW or equiv.
2.2kW or equiv.
Capacity Type Weight
1
2
3
Fig. Number
F3SS-45-80~240-075
F3SS-45-5~60-150
F3SS-45-5~30-220
The values within parentheses are of those with brake motors.
φ24F7Depth52 (Standard S surface)
4.512
130G7200
8
27φ
φ
S
87
8773
73
48.8174
14
2358773 134
148
344
φ20
98.5115
1685050 68
26 26
φ64
φ45H8
φ100h7φ64
φ45H8
φ100h7
2 2
(attachment)
Protective capF3S-45
7 7150164
63 63
7575
4-M16×P2.0 4-M16×P2.0
108 108When the protectivecap is attached.
When the protectivecap is attached.
4-φ16.5 4-φ14
4-M10×P1.5Depth25
165φ
Flange surface Flange surface
Frame No. 45Fig.1
Fig.2
Fig.3
1685050 68
26 26
φ64
φ45H8
φ100h7φ64
φ45H8
φ100h7
2 2 φ20
14
2728769 167
185
350
87
8769
69
48.8174103
119.5
7 7
7575150164
73 734-M20×P2.5 4-M20×P2.5
108 108When the protectivecap is attached.
When the protectivecap is attached.
Flange surface
4-φ20.5 4-φ17.5
4-M10×P1.5Depth23 (Penetrated)
9
6
21.5
4.5
φ130G7
165200
φ19F7Depth42 (Standard S surface)
φφ
S
Flange surface
(attachment)
Protective capF3S-45
87
8773
73
48.8174
14
2358773 134
148
356.5
φ20
98.5115
1685050 68
26 26
φ64
φ45H8
φ100h7φ64
φ45H8
φ100h7
2 2
7 7150164
63 63
7575
4-M16×P2.0 4-M16×P2.0
108 108When the protectivecap is attached.
When the protectivecap is attached.
Flange surface
4-φ16.5 4-φ14
φ180G7φ250
165
8
31φ215
S
Flange surface
(attachment)
Protective capF3S-45
φ28F7Depth62 (Standard S surface)
4-M12×P1.75Depth16 (Penetrated)
D72
Outer DimensionDiagrams
S-Type ReducerConcentric Hollow Shaft F3 Series (F3S Type)
The values within parentheses are of those with brake motors.
75kg
76kg
1.5kW or equiv.
2.2kW or equiv.
Capacity Type Weight
1
2
Fig. Number
F3SS-55-80~240-150
F3SS-55-80~120-220
φ180G7 φ250
16
5
8
31
φ28F7Depth62 (Standard S surface)
φ215
336
11694
16
198
220
130
130
108
108
59.3260
88
100100
200
143 143When the protectivecap is attached.
When the protectivecap is attached.
216
4-φ20.5 4-φ17.5
4-M20×P2.5 4-M20×P2.571.5 71.5
2206161 98
32 32
φ79
φ55H8
φ120h7 φ79
φ55H8
φ120h7
2 2 φ25
149169.5
447
3-M4
S
2206161 98
32 32
φ79
φ55H8
φ120h7 φ79
φ55H8
φ120h7
2 2 φ25
149169.5
336
11694
16
12
4.5198
220
434.5
130
130
108
108
260
88
100100
200
143 143When the protectivecap is attached.
When the protectivecap is attached.
216
4-φ20.5 4-φ17.5
4-M20×P2.5 4-M20×P2.571.5 71.5
4-M10×P1.5Depth25
130G7165
200
8
27φφ
φ
3-M4
S
59.3
The values within parentheses are of those with brake motors.
29kg2.2kW or equiv.
Capacity Type Weight
F3SS-50-40~60-220
8
31
φ28F7Depth62 (Standard S surface)
106
10690
90
53.8212
14
304118102 170
186
435.5
φ20
121137.3
1725555 62
29 29
φ74 φ74
φ50H8 φ50H8
φ110h7 φ110h7
2 2
16
5
4-φ16.5
77
7777154
120 120When the protectivecap is attached.
When the protectivecap is attached.
168
(attachment)
Protective capF3S-5055
4-φ14
4-M16×P2.0 4-M16×P2.059 59
φ180G7φ250
φ215
S
3-M4
Frame No. 50
Frame No. 55Fig.1
Fig.2
Flange surface Flange surface
Flange surface Flange surface
Flange surface Flange surface
(attachment)
Protective capF3S-5055
(attachment)
Protective capF3S-5055
4-M12×P1.75Depth16 (Penetrated)
φ24F7Depth52 (Standard S surface)
4-M12×P1.75Depth16 (Penetrated)
D73
Outer DimensionDiagrams
D74