Geatech Cataloque Railway Equipment

GEATECH S.p.A.

Via del Palazzino 640051 Altedo (BO) - ITALY

P.IVA 01959741206tel.+39. 051.6601514 fax +39.051.6601309

www.geatech.ite-mail [email protected]

05/10

ELECTRIFICATION PRODUCTS

Short Circuiting Devices, Electronic Detector, Shunting Cables.

SECTION 7

TRAMWAY AND METRO LINE MACHINES AND EQUIPMENTSElectric Cutting-Off M., Electric Impact Wrench, Electric Rail Drill, Electric Grinder, Electric Sleeper Drill, Electric Tamping M., Tram Shear, Tram Cutting-Off, Generating Set, Electric Panel, Lamp Tower,

SECTION 2

USED MACHINE TRADING

OILS AND LUBRICANTS

Electronic Lubrication System, Berulub, Ceritol, Emulsifiable Oil, Degreaser, Grease, Hugh-Lub, Shoulder and

Manual Pumps.

RAIL HANDLERS AND BUCKETS

HYDRAULIC EQUIPMENT

Hydraulic Units and spares, Hydraulic Unit CSM.

SITE MACHINES AND EQUIPMENTGenerating sets, Lamp Towers, Hydro-Cleaners, Welding Set, Motor Pump, Liquid Collection Tank, Tools Box, Tow-bars, Carriage Stopper, Tirvit, Welding Equipment, Hydraulic Hammers and Coring Machines, Asphalt Cutters.

SPARE PARTS

Ballast Cleaning Machine: Complete Chain for RM66/74/76, RM80, RM900, 12CB8, C75, C90, C14, C330,

Curves and Front Channel for RM860, Curves for C330, Pins, Springs, Scrapper Teeth, Pinions, Rollers,

Mesh Screens, Plates.

Tamping Machine: Optical Track Device, Tamping Tools, Tamping Support, Cylinders, Pistons, Forks,

Shaft and Camshaft, Gasket and Flanges.

Renewal Train: Shoe Support, Sled Track, Pinions, Conveyor Belt and Spare Parts.

Welding Machine: Plates, Cutters, Conductors, Insulators, Miscellaneous, Pins, Tension Rods, Cylinder shelters.

Profiling Machine: Conveyor Belt, Brushes and Sleeves

Slewing Cranes

Various Spare Parts: Brake Blocks, Pneumatic Valves, Exchangers, Electric Fans, Compressors.

SIGNALLING AND SAFETY EQUIPMENT

Lamps, Horns, Whistles, Clothing, Signal Plates, Rear Lamp, Optical Unit, Flags, Railway Signals,

Signalling Disc, Torches, Spanners.

MEASURING DEVICES

Callipers, Rail Profile Calliper, Rail Thermal Expansion Calliper, Rail Expansion Calliper, Wheel Calliper,

Thermometers, Length Measuring Device, Optical Track Device, Dial Torque Wrench.

ACCESSORIES

Sockets, Impact Wrench Spares, Drill Bits, Shanks, Grinding Wheel, Milling Cutter, Cutting Discs, Adzes Discs.

HAND TOOLS FOR RAILWAYCrowbars, Lifting and Sliding Rollers, Spanners, Forks, Picks, Handles, Crowbars, Shovels, Hoes, Wedges, Tongs.

RAILWAY EQUIPMENTHydraulic Pulling Clamp, and Accessories, Handling Trolleys, Arch-hoisting Devices, Jacks, Carrying Trolleys, Lighting Towers, Deragliament Arm, Point Machines Handling, Clamps, Adjusting devices.

RAILWAY MACHINERYPandrol M., Vossloh M., Ballast Remover and Compacting M., Spiking M., Rail Releasing M., 2-Stroke Impact Wrench, Electric Impact Wrench, Hydraulic Impact Wrench, Trolley for Impact Wrench, Tamping M., Fast-Clip, Rail Drill, Sleeper Drill, Cutting-Off M., Grinders, Portable Grinder, After Welding Grinder, Hydraulic Shear, Testing Press, Tunnel Fan, Cranes.

SECTION 12

SECTION 13

SECTION 12

SECTION 11

SECTION 10

SECTION 9

SECTION 8

SECTION 6

SECTION 5

SECTION 4

SECTION 3

SECTION 1

SECTION 1RAILWAY MACHINERY

PANDROL CLIP MACHINE Mod. G2To insert Pandrol type rail clips.Engine Type: Petrol Code F1008

Diesel Code F1010Weight of 9Hp petrol version: 162Kg (149+13)Dimensions: 1800x500x850mm

Suitable for the following types of fastener

Pag. 1

PANDROL CLIP MACHINE Mod. G4 with double lifting device

Machine particularly suitable in the application

of new construction with Pandrol fastenings. Equipped with low sleeper lifting device and hydrostatic device.

Engine Type: Petrol Code F1011B10Weight: 690KgDimensions: 1900x1850x1500mm

PANDROL CLIP MACHINE Mod. G4To insert Pandrol type rail clips equipped with detachable carriage. The machine inserts 4 Pandrol clips on the same sleeper per cycle.Engine Type: Petrol Code F1011

Diesel Code F1012Weight of 10Hp petrol version:130+190Kg Dimensions: 1600x1700x800mm

PANDROL CLIP MACHINE Mod. G2-MTTo insert and remove Pandrol type rail clips.The quick easy assembly is a key feature of this machine.

Engine Type: Petrol Code F1048Diesel Code F1075

Weight of 5.5Hp petrol version: 103Kg

Dimensions: 1750x500x740mm

The images used in this catalogue are purely indicative

and constitutes no commitment for the producer/distributorBACK TO INDEX


Suitable for W14 fastener

BALLAST REMOVER Mod. ESG-RMachine designed to remove gravel under the rail flange. Engine Type: Petrol Code F1081B02

Diesel Code F1081D01Weight of 9Hp petrol version: 430KgDimensions: 1850x400x1300mm

BALLAST COMPACTING Mod. TI

Machine designed for compacting and levelling the ballast to finish off ballast worksEngine Type: Petrol Code F1103B01



and constitutes no commitment for the producer/distributor

VOSSLOH CLIP MACHINE Mod. VTC-L

To insert Vossloh W14 type clips, with detachable frame.Engine Type: Petrol Code F1100Weight: 180KgDimensions: 2100x570x1200mm

VOSSLOH CLIP MACHINE Mod. VTC

To insert Vossloh W14 type clips; available with detachable frame on request.Engine Type: Petrol Code F1068B01


Pag. 2 BACK TO INDEX


HYDRAULIC SPIKING MACHINE Mod. INHHydraulically operated spiking machine with adjustable torque for laying and maintenance of tracks with “K” type fixings. Equipped with detachable frame, specially designed

for switch tracks.Engine Type: Petrol Code F1041B01

Diesel Code F1041D01

Weight of 5.5Hp petrol version: 154Kg Dimensions: 2000x520x1200mm

DOUBLE HEAD HYDRAULIC SPIKING MACHINE Mod. INH2

Double head hydraulic spiking machine with

variable torque for adjustment and maintenance of tracks with “K” type fixings. Equipped with detachable frameEngine Type: Petrol Code F1042B01

Diesel Code F1042D01Weight of 13Hp petrol version: 240Kg Dimensions: 2100x570x1200mm

SPIKING MACHINE Mod. Succi S2Mechanical spiking machine for laying and maintaining tracks with bolt fixings.Engine Type: Petrol Code F1026

Diesel Code F1028Weight of 9Hp petrol version: 112KgDimensions: 2000x520x850mm


RAIL RELEASING MACHINE model SR75

Machine designed to remove the rails from “K”type fixings. Engine Type: Petrol Code F1020

Weight: 130KgDimensions: 1650x500x900mm

Pag. 3 The images used in this catalogue are purely indicative



IMPACT WRENCH MACHINE Mod. SH-01Portable machine equipped with 2-stroke endothermic motor. (usable also as a Sleeper drilling machine – see the Section 5 Accessories). Max torque: 2500NmPower: 4.1 HpEngine Type: 2-stroke Code F1094Weight: 23Kg

Dimensions:720x420x260mm

IMPACT WRENCH MACHINE Mod. GT-LOW VIBRATION

Portable machine equipped with 2-stroke

engine. usable also as a Sleeper drilling machine – see the Section 5 Accessories). Max torque: 1030NmPower: 2.3Hp

Engine Type: 2-stroke Code F1034M01Weight base configuration: 20,5KgDimensions: 700x330x390mm

IMPACT WRENCH Mod. SM-01

Portable impact wrench with 2-stroke engine.(used also as a Sleeper drilling machine –

see the Section 5 Accessories) Engine type: 2-stroke Code F1094M06.Power: 4.1Hp

Max torque: 2500 NmWeight: 18KgDimensions: 720x420x260mm

ELECTRIC IMPACT WRENCH Mod. SB-01

Portable Impact Wrench with electric engine.

(used also as a Sleeper Drilling Machine –see Section 5 Accessories)Engine Type: Electric code F1094E01.Max torque: 1000 Nm






IMPACT WRENCH MACHINE Mod. SL-01

Portable machine equipped with hydraulic motor. (used also as a Sleeper drilling machine – see the Section 5 Accessories)

Max torque: 1650 NmEngine type: hydraulic Code F1094I01Weight: 8Kg


IMPACT WRENCH MACHINE Mod. FC- 02 WITH TROLLEY

Impact wrench (Code F1034) mounted on trolley (Code F1084) equipped with fully detachable frame for easy transportation.

Engine type: 2-strokeWeight: 20.5+31KgDimensions: 520x400x820mm

TAMPING MACHINE Mod. Cobra TT

Portable tamping machine with 2-stroke engine.

Engine type: 2-stroke Code UF0029 Weight: 25KgDimensions: 927x331x611mm

ELECTRIC TAMPING MACHINEMod. RCP-E1

Portable machine equipped with electric

motor. Engine type: electric Code F1114E01Power: 1.24KwKnock per minute: 1620bpm

Weight: 13.1KgDimensions: 540x220x600mm




FAST CLIP MACHINE WITH SLEEPER LIFTING SYSTEM Mod. FC-G2 TS ST

(GEATECH PATENTED)This a new machine designed to secure tracks to sleepers using Pandrol Fast-clip fittings. The machine can insert and release the clip in three fundamental positions: install position / park

position /insulator changing position. The peculiarity of this machine is the sleeper lifting Device which permits, while needed, improved

alignment between the fast clip and fastening system on the sleeper.Engine type: Petrol Code F1091B01

Diesel Code F1091D01

Weight of 5.5Hp Petrol version: 175Kg Dimensions: 2000x750x900mm




Pag. 6BACK TO INDEX


RAIL DRILLING MACHINE Mod. FRG-024-STROKE

Machine equipped with 4-stroke endothermic motor, drilling jig and lubricant pump tank.

Engine Type: Petrol Code F1033B01Power: 1.6HpWeight: 20Kg


RAIL DRILLING MACHINE Mod. FRG-05 2 STROKES

2 strokes endothermic engine raill drilling machine endowed with drilling jig and lubricant pump tank. Engine: 2-stroke Code F1033B10Power: 1.9HpWeight: 19KgDimensions: 450x260x420mm

RAIL DRILLING MACHINE Mod. FRG-900 ELECTRIC

Electrically operated machine equipped with drilling jig, and lubricant pump tank.Code F1086.

Power: 0.8KwWeight: 15KgDimensions: 700x260x400mm




SLEEPER DRILLING MACHINE Mod. FTP- 01

Portable machine equipped with 2-stroke endothermic motor and gauge-rod for drilling depth setting. A track mounted trolley is

available on request.Engine Type: 2-stroke Code F1057Power: 1.8Hp


TROLLEY FOR SLEEPER DRILLING MACHINE Mod. FC- 01

Sleeper drilling machine (Code F1057) mounted on trolley (Code F1061) with fully detachable frame for easy transport.

Engine Type: 2-strokePower: 1.8HpWeight: 14+31KgTrolley dimensions: 1200x1700x1020mm

SLEEPER DRILLING MACHINEMod. FTS-01

Machine equipped with 4-stroke endothermic motor, gauge-rod for drilling depth setting and transverse travelling gear

Engine Type: Petrol Code F1043B01Diesel Code F1041D01

Power: 5,5Hp - Weight: 90Kg


ELECTRIC SLEEPER DRILLING MACHINEMod. FTP-E1

Portable machine equipped with electric motor. Engine Type: electric Code F1057E01

Power: 1,15KwWeight: 12KgDimensions: 260x600x1000mm





CUTTING-OFF MACHINEMod. TRG 010

Machine equipped with 2-stroke endothermic motor, with counterweighted rail connection arm. Cutting disc: Ø 350 mm .

Engine Type: 2-stroke Code F1017Power: 5.4Hp Weight: 13+9Kg (arm)Dimensions: 750x400x420mm

CUTTING-OFF MACHINE Mod. TRG-031Machine equipped with 2- stroke endothermic motor, with counterweighted rail connection arm.Cutting disc : Ø 400 mm.Optional: automatic shut-off device Engine Type: 2-stroke Code F1052M02Power: 6.8Hp - Weight: 15.8+9Kg (arm)


HYDRAULIC CUTTING OFF MACHINE Mod. TRG-011

Machine equipped with hydraulic engine, with counterweighted rail connection arm.Cutting disc: Ø 400mm.Engine type: hydraulic Code F1052I01Power: 12Hp Weight: 14+9Kg (arm)





RAIL GRINDING MACHINE Mod. GSR

Designed for grinding rail head profile after welding.

Engine Type: 2-stroke Code F1039M01 Petrol Code F1039B01

Weight of 8,0 Hp 2-stroke version: 65KgDimensions: 1200x600x900mm

RAIL GRINDING MACHINE Mod. FSRDesigned for grinding rail head after welding. Three parts detachable frame.Engine type: Petrol Code F1039B20

Diesel Code F1039D20Weight 7,5Hp Diesel version: 99KgDimensions: 1100x500x700mm

ELECTRIC GRINDING MACHIINE Mod. GSRE

Designed for grinding rail head profile after welding.Engine type: electric Code F1039E01

Weight: 71KgDimensions: 1200x450x900m

RAIL GRINDING MACHINE Mod. GSRI

Designed for grinding rail head profile after welding. Engine Type: Hydraulic Code F1039I01






RAIL GRINDING MACHINE Mod. GSRP-200

The GSRP-200 rail grinder is designed for finishing work on rails after welding . Engine Type: Petrol Code F1039B11

Weight : 6,2KgDimensions: 220x670x330mm

HYDRAULIC GRINDING MACHINE Mod. SMS

Designed for removing rust from rail web

before spark-welding. Engine Type: Petrol Code F1032B01

Diesel Code F1032D01Weight of 4.6Hp petrol version: 83Kg


HYDRAULIC WELDING SHEARING MACHINE Mod. TIS

Machine designed to remove excess weld bead from the track joint after thermal welding.

Code F1035A01Suitable for UNI-UIC Rails Weight: 59Kg





RAIL TESTING PRESS Mod. GP250TElectro-hydraulic machine to check rail weld

Quality. Strong and fully enclosed frame for operator’s protection during testing. The gate is equipped with safety micro-switches and remote control.

Force: 250.000Kg Code F1044Weight: 2400Kg

BIG-FAN FOR TUNNEL VENTILATION ENBLOCK

Code F1102

Fan Ø 2.600 mmDiesel Motor 368KwRpm 1800Electric starter

Flow-rate: 660.000 m³/hourAir speed 43.5 m/sec. .

DETACHABLE BIG-FAN FOR TUNNEL VENTILATION

Code F1102A10

Fan Ø 2.750 mmDiesel Motor 368 KwRpm 1800Electric starter

Flow-rate: 660.000 m³/hour.Air speed 43.5 m/sec

CRANES WITH TELESCOPIC ARMS FOR RAIL HANDLING SUITABLE FOR 36 MT

RAIL




CUTTING-OFF MACHINE Mod. TRE 010Machine equipped with electric motor, with

counterweighted rail connection arm.Cutting disc: Ø 350mm .Engine Type: electric Code F1052E01

Power: 3.6Hp Weight: 12+9Kg (arm)Dimensions: 650x310x430mm

ELECTRIC IMPACT WRENCH MACHINE Mod. SB-01

Portable machine equipped with electric motor. (usable also as a Sleeper drilling

machine – see the Section 5 Accessories)Max torque: 1000 NmEngine type: electric Code F1094E01


RAIL DRILLING MACHINE Mod. FRG-900 ELECTRIC

Electrically operated machine equipped with drilling jig, and lubricant pump tank.

Code F1086.

Power: 0.8Kw


ELECTRIC GRINDING MACHIINE Mod. GSRE

Designed for grinding rail head profile after

welding.Engine type: electric Code F1039E01Weight: 71Kg

Dimensions: 1200x450x900m

Pag. 13The images used in this catalogue are purely indicative


SECTION 2TRAMWAY AND METRO LINE

MACHINES AND EQUIPMENTS

ELECTRIC SLEEPER DRILLING MACHINEMod. FTP-E1

Portable machine equipped with electric motor. Engine Type: electric Code F1057E01Power: 1,15Kw


CUTTING-OFF MACHINE Mod. TRG-031T

Machine equipped with 2- stroke endothermic Motor, designed for tramways lines.

Cutting disc: Ø 400mm.Engine type: 2-stroke Code F1052M10Power: 6.8Hp

Weight: 15.8 + 9Kg (arm)Dimensions: 750x400x420mm

ELECTRIC TAMPING MACHINEMod. RCP-E1

Portable machine equipped with electric motor.

Engine type: electric Code F1114E01Power: 1.24KwKnocks per minute: 1620bpm

Weight: 13.1KgDimensions: 540X220X600mm

HYDRAULIC WELDING SHEARING MACHINE Mod. TIS-G

Machine designed to remove excess weld bead from the track joint after thermal welding. Code F1035A02Suitable for Ri59 and R13 Rails Weight: 73KGDimensions: 650x410x410mm








PORTABLE GENERATING SETMod. EU 20i

Code EC0003Portable generating set. Ultralight and compact.Engine: 4 stroke Honda gasoline engine


PORTABLE ELECTRICAL PANEL Code EE0026

Portable electrical panel on steel stand

ELECTRICAL PANELCode EE0025

With magneto-thermal differential switch Voltage: 220VCurrent: 0.03A

SITE LAMP TOWERS

Engine Type: Petrol Starter: hand startingPower (W): 500-1500



SECTION 3RAILWAY EQUIPMENT

HYDRAULIC RAIL PULLING CLAMP Mod. MT

Hydraulic rail-pulling clamp for rail stressing.Suitable for UNI 50 - 60 Rails.Pulling Force: 670KN

Stroke: 380mm Code F1067530mm Code F1040

Machine available manually and/or hydraulically operated

HYDRAULIC CONTROL UNIT AND PUMPSFOR RAIL-PULLING CLAMP

Hydraulic hand pump Code IX0001

Pressure 1°/2°stage : 35/700 barTank Capacity : 8l

Hydraulic control unit powered by a 4-stroke engine encased in a tubular frame .Code IX2001Pressure 1°/2°stage: 70/700 bar Engine 4 stroke

Tank capacity: 10lt

Hydraulic control unit powered by a 4-stroke engine with tubular frame trolley mounted

Code I8031Pressure 1°/2°stage: 70/700 bar Engine 4 strokeTank capacity: 30lt





TROLLEY

Designed for the carriage and rail handling Code F1108A01 Weight: 680KgDimensions: 2000x900x530mmLoad capacity: 10.000Kg

TROLLEY WITH TACK BUMPKIN

Designed for the carriage and rail handling equipped with a tack bumpkin for a easier rail load and unloading.Code F1108A02Weight: 785KgDimensions: 2000x900x530mmTrolley capacity: 10.000KgTack bumpkin capacity: 1.000Kg

ARCH-HOISTING DEVICE

Designed for any type of rail hoisting and rail handling. Composed by two supports (with handles and wheels) one crossing beam and one chain block. Easy moving on the rails, thanks to insulated wheels and handles.Code F1045Weight: 82Kg (19+19+20+18+6).Dimensions: 2200x1000x2000mm

MINI ARCH-HOISTING DEVICE WITH PULLEY AND TONG

Used for tracks positioning on rollers and for small track lifting.Code F1045A02 Max load: 1t




MECHANICAL SCREW JACK

Lifting capacity: from 1.5 - 20 tonnesWeight: 18 – 90kg

HYDRAULIC JACK

Hydraulic jack manually operated with turning base. Lifting capacity: 5 - 10 – 20 tonnesWeight: 25 – 52kg

SCREW JACK WITH MILLIMETRICAL LIFTING DEVICE

Designed for millimetre by millimetre track levelling, using T control rod , easily inserted

under the rail.Lifting capacity: 10tWeight: 19kg

SCREW JACK WITH MILLIMETRICAL LIFTING DEVICE WITH ARTICULATION

Designed for millimetre by millimetre track levelling, particularly useful when working right by the welding.Lifting capacity: 10tWeight: 21Kg





TROLLEYTrolley for carrying materials with insulated frame. Many versions available Weight: 50/55KgDimensions: 800x1800mm Code F1070

1000x1800mm Code F1071Loading capacity: 500Kg

TROLLEY WITH AUTOMATIC BRAKE SYSTEM

Trolley for carrying materials with insulated frame with automatic brake system.Many versions available.Weight: 64/69KgDimensions: 800x1800mm Code F1106

1000x1800mm Code F1106A01Loading capacity: 500Kg

MOTORIZED TROLLEY Mod. GHP-02

Motorized trolley for raw material or equipment transport with insulated from tracks chassis and hydraulic transmission. Max speed: 5Km/hEngine: Gasoline Code F1110B01Weight: 118Kg Dimensions: 2000x1000x1500mmMax load: 500Kg

RAILWAY LIGHTING TOWERS

Trolley for carrying materials with lightingtowers for site night illumination. The quick-release of the lighting towers allows them tobe placed everywhere, thanks to the supportfeet.Weight: 45 KgDimensions: 2200x750x850mmLoading capacity: 500Kg




DERAGLIAMENT ARM Mod. DR-170(GEATECH PATENTED)

System manufactured to derail and place on the rail equipments and machines with a weight ‘till 170Kg.

Code F1096Loading capacity: 170KgDimensions: 2250x640x180mm open

1400x640x180mm closedWeight: 33kg

POINT MACHINES HANDLING(GEATECH PATENTED)

System manufactured to handle point machines for switch points. Code F1096A01Loading capacity: 300KgDimensions: 2000x1680x270mm open

1600x 580x270mm closedWeight: 55Kg

ANTI-UNSCREWING CLAMP Mod. G743

Clamp for temporarily connecting rails with no-drill-holes including locking cap.

Suitable for UNI50 – 60 rails. (FS1982 standard specifications )

CLAMP Mod. V75

Clamp for temporarily connecting rails with no drill-holes. Code VA0001Suitable for UNI50 – 60 rails(FS1975 standard specifications )





RAIL GAUGE ADJUSTING DEVICE(GEATECH PATENTED)

Head to Head Code F1087

RAIL GAUGE ADJUSTING DEVICE(GEATECH PATENTED)

Head to turnoutCode F1087A02

TRAMWAY GAUGE ADJUSTING DEVICE(GEATECH PATENTED)

Code F1087A10



SECTION 4HAND TOOLS FOR RAILWAY

CROWBAR FOR INSERTING PANDROL CLIP

Code F1092

CROWBAR PANDROL LIFTING SLEEPER Code FA0011

MANUAL CROWBAR FOR INSERTING FAST-CLIPCode F1090

MANUAL CROWBAR FOR REMOVING FAST-CLIPCode F1089

CROWBAR FAST-CLIP LIFTING SLEEPERCode F1101





RAIL LIFTING ROLLER

Equipment used for laying or replacing tracks fastened with Pandrol clips or Vossloh clips

Roller for Pandrol clips Code F1077Roller for Vossloh clips Code F1064

RAIL SLIDING ROLLERCode 03871

.

T SPANNERS UNI 22/24/38 Code 04953

SPANNERS 38/44short/medium/long

T SPANNERS

Code Length (mm)

03502 420

03490 620

03503 820

Code Socket

06230 UNI20

06231 UNI22

06232 UNI24

05050 UNI38




PICKS AND BALLAST FORKS 8/4 PRONGS

HANDLES AND CROW BARS

SHOVELS - HOES

For removing or levelling gravel

THICK WEDGES

WOODEN SLEEPERS TONGCode UN0140

CONCRETE SLEEPERS TONGCode UN0141

RAIL TONGCode UN0142




SECTION 5ACCESSORIES

SOCKETS FOR IMPACT WRENCH AND SPIKING MACHINES

UNI20 - 20x20mm - Code 04485 UNI24 - 21x28mm - Code 02649 UNI22 – 1” - Code 02648 Universal Joint 1“ - Code 04486 UNI38 – HEX 38mm - Code 02647

SPARE PARTS FOR IMPACT WRENCHES

Chuck 1” - Code FA0034 Extension 1”x175mm - Code ZA0650

DRILL BITS FOR SLEEPER DRILLING MACHINES

Ø 14X280mm - Code 04413 Ø 15X280mm - Code 04414 Ø 16X280mm - Code 04352Ø 16X320mm - Code 04353Ø 18X280/320mm - Code 04031-04351 Ø 20X280/320mm - Code 04415-04416Extends protection bit L.320mm - Code 04291

SHANKS FOR TAMPING AND DEMOLITION

HAMMERS

GRINDING WHEELSGrinding wheels for removing rust and refinishing rail135x85x26mm - Weight 2,5Kg Code UB0200127x63x32mm - Weight 1,6Kg Code UB0201150x73x57mm - Weight 2,9Kg Code UB0202250x33x76.2mm - Weight 4,0Kg Code UB0203125x65xM20mm – Weight1,7Kg Code UB0208



SECTION 5ACCESSORIES

MILLING CUTTERS FOR RAIL DRILLING MACHINES

From Ø 19mm up to Ø 40mm.HSS steel and WIDIA

MILLING CUTTERS FOR RAIL DRILLING MACHINES WITH SMALL PLATES

WidiaØ 17mm Cod. UA1104Ø 29mm Cod. UA1124Ø 32mm Cod. UA1131

CUTTING DISCS FOR RAIL CUTTING MACHINES

Ø 300mm - Code UB0001

Ø 350mm - Code UB0002Ø 400mm - Code UB0004

CUTTING DISCS

Ø 115mm - Code UB0128 Ø 230mm - Code UB0120

ADZES DISCSØ 115mm - Code UB0153 Ø 230mm - Code UB0149




SECTION 6MEASURING DEVICES

MEASURING DEVICES

CALIPER model FS 69U

Cat. FS 744/106 - Code SA0015for track gauge, levelling and super elevation

CALIPERSfor levelling , super elevation, track and switch

gauge.

Gauge : 900mm

1000mm1435mm

Portable version

CALIPER FOR RAILWAY PROFILECode F1115

CALIPER FOR CHECKING THE RAIL THERMAL EXPANSION

(L.R.S. = long welded rails ) Code F1109




CALIPER FOR RAIL EXPANSIONCode 05159

CALIPER FOR RAILWAY WHEELS PROFILES

Code SA0025

Magnetic rail thermometers. Code SA0201

Contact rail thermometers. Code SA0200

For rail temperature measurement.

Digital thermometer with infrared detection

Code SA0210

Length measuring device for train tracks.Code SA0043




Pag. 28BACK TO INDEX


OPTICAL TRACK LEVELLING EQUIPMENT FOR TAMPING MACHINE

OPTICAL TRACK LEVELLING EQUIPMENT

UNIVERSAL OPTICAL TRACK MEASURING EQUIPMENT

DIAL TORQUE WRENCH

Dial torque wrench for keeping the reached

torque values for “K” , Vossloh, ecc. clips .Measuring range: 200 - 2700 NmMax weight: 13.5Kg



SECTION 7ELECTRIFICATION PRODUCTS

SHORT CIRCUITING AND GROUNDING DEVICE

Code TA0080Short circuiting and grounding equipment for railway contact line 3 kV d.c. and feeders

Cable length 4,95 m or 9,2m

SHORT CIRCUITING AND GROUNDING DEVICE

Code TA0081Short circuiting and grounding equipment for HV overhead lines and installations up to 150 kV. Cables section 50mm² or 95mm²

DC VOLTAGE ELECTRONIC DETECTOR Code TA0082

DC voltage electronic detector with visual and acoustic signalling for use on railways lines and installations. .Voltages 500÷3.600 V d.c.

DC VOLTAGE ELECTRONIC DETECTORCode TA0083

DC voltage electronic detector with visual and acoustic signalling. Voltages 385÷1.800 V d.c.

DC VOLTAGE ELECTRONIC DETECTORCode TA0084

DC voltage electronic detector with visual

and acoustic signalling for use on tramways and underground lines




SECTION 7ELECTRIFICATION PRODUCTS

SHUNTING CABLES

Shunting cables with magnets code TA0001

Shunting cables with clamps code TA0002

SHUNTING CABLES WITH CLAMPS

120mm2 code TA0005



SECTION 8SIGNALLING AND SAFETY EQUIPMENT

RECHARGEABLE SIGNALLING LAMPS

Halogen signalling lamps with battery charger including interchangeable coloured glasses.

.

POCKET SIGNALLING LAMPS

Portable battery-powered signalling lamps. Complete with fast-change interchangeable

coloured lenses.

AIR HORN TRB-01

Rechargeable, working site, safety warning horn. Code F1079

Weight: 8,5Kg

ELECTRONIC SIREN TRB-02Code TB0004

Safety siren for worksite protection, with batteries, rechargeable.

Weight: 1,5KgBattery life: 30 minutes

SIGNALLING HORNSignalling safety horns.

SAFETY AND SIGNALLING WHISTLESCode TB0020





PROTECTIVE CLOTHING

REAR SIGNAL PLATES FOR TRAINCode TA0060

REAR LAMP FOR TRAINCode TA0050

OPTICAL UNITCode TA0051

SIGNALLING FLAGS




RED SIGNALLING TORCHES CAT. 003-076Code TB0010

ARTICULATED TRIPLE SPANNERCode TA0020

“L” SQUARE SPANNERFor dropper washer code TA0019

“Z” SQUARE SPANNER

For dropper washer code TA0018

RAILWAY SIGNALS

ROAD SIGNALS FOR LEVEL CROSSING WORKS

Code TD0005

SIGNALLING DISC FOR DISMISSAL NIGHT TRAIN CAT. FS 024/279

Code VT0010

STRAIGHTENING WIRE SPANNER

For droppers code TA0017




SECTION 9SPARE PARTS

BALLAST CLEANING MACHINES

SCRAPER SHOVELS FOR RM66/74/76

SCRAPER SHOVELS FOR RM900

COMPLETE CHAIN FOR RM80

DIGGING CHAINS





COMPLETE CHAIN FOR 12CB8

COMPLETE CHAIN FOR C75



DIGGING CHAINS







Normal trucking with three fixed scraper teethScraper shovel height 305mm


Reduced trucking with one movable tooth.


Reduced trucking with three fixed scraper teeth

Scraper shovel height 205mm


Normal trucking with three movable scraper teeth

DIGGING CHAINS





DOWNFALLING AND UPRISING CURVES FOR RM860

FRONT DIGGING CHANNEL FOR RM860

DOWNFALLING AND UPRISING CURVES FOR C330






PINS, STOP SPRINGS AND SCRAPER TEETH FOR ASSEMBLING SCRAPER CHAINS FOR: C90; C14; 12C; B8; C330

PINIONS AND CROWNS

ROLLERS, PINS AND VARIOUS SPARE PARTS

MESH SCREENS AND WEAR PLATES




TAMPING MACHINES

OPTICAL TRACK MEASURING DEVICE

Universal optical track measuring unit trolleymounted equipped with flags for tampingmachines

TOOLS FOR TAMPING MACHINES

Suitable for use on the following machines:08/32 , 09/32, 09/32CSM, 09/3X, B40/B45/B50, 08/275

TAMPING SUPPORT





TAMPING MACHINES

CYLINDERS AND CLOSING CYLINDER FOR TAMPING UNIT

PISTONSFOR TAMPING UNIT

FORKS FOR TAMPING UNIT




TAMPING MACHINES

SHAFTS AND CAMSHAFT FOR TAMPINGUNITS

GASKETS AND FLANGES FOR TAMPING UNITS

MAINTENANCE AND OVERHAULING SERVICE FOR

Tamping unitsProfiling machines

Ballast cleaning machines





RENEWAL TRAINS

Shoe Support

Mounted shoe support

Sled track for P90 train

Complete sled track for P90 train




RENEWAL TRAINS

Pinions

Conveyor belt spare parts-Track link

-Joint-Support spike

Conveyor belt spare parts-Track link

-Joint-Support spike

Conveyor belt spare parts

Internal track-linkExternal track-link

Conveyor belt spare parts

Track-linkSupport spike

Conveyor belt





WELDING MACHINES

SPARES FOR WELDING MACHINES OVERHAULING

Plates UNI50/UNI60 (Overhauling)

CUTTERS UNI 36/50/60Manufacture, regulation and overhauling UNI36/50/60

SPARE PARTS FOR WELDING MACHINE

Electrical conductorsInsulator supports

miscellaneousPins and stop pinsTension rodsCylinder shelters




PROFILING MACHINES

CONVEYOR BELT

BRUSHESAND

SLEEVES

SLEWING CRANES

SLEWING CRANES FOR RAIL HANDLING

CraneSlewing pillar

Clamp Crane rotation rackCylinder with 3 extending cylinders

Cylinders and clamps overhaul and maintenance





VARIOUS SPARE PARTS

BRAKE BLOCKS

cast iron / synthetic brake blocks

PNEUMATIC VALVES FOR BRAKESUNITS, BRAKES UNITS AND LINEAR

ACTUATORS

EXCHANGERS

Air /oil exchangers for:Tamping machines, Restoring machines,Profiling machines, track-relaying trains..

ELECTRIC FANS

For aspirator or blower exchangers

COMPRESSORS

Single cylinder, twin cylinder and V engines.



SECTION 10SITE MACHINES AND EQUIPMENTS

ELECTRIC GENERATING SETS

Engine Type: Petrol / DieselPower (KVA): 0.8/800

SITE LAMP TOWERS

Engine Type: DieselStarter: electric Light units: Sodium, Metal iodides, Halogen

Power (W): 400-1500

SITE LAMP TOWERS WITH BASKET AND 3,5MT BAR

Code EG0120

Composed by: - Site lamp system with basket and 3,5 mt

telescopic bar - 15 m cable- 1000W halogen projectors

- 3 bars system and 2 1000W projectors- Electrical panel





HYDRO-CLEANERS

MOBILE WELDING SET

MOBILE WATER MOTOR PUMP




LIQUID COLLECTION TANK Code 05163

Dimensions: 500x450x150mmWeight: 6KgCapacity: 30lt

WORK TOOLS BOX

Code 06246

Dimensions: 800x1800x800mmAnti-rust paint

TOW-BARSTow-bar type A and BType A code 04765 – Type B code 04764Lifting power: 40t Length: 1,70m

Weight: 25/31Kg

TIRVIT TENSIONER

Wires’ diameters (mm): from 8 up to 19 Traction strength: 400-5000KgWeight: 3.5-27Kg

CARRIAGE STOPPER Code UQ0001

Weight: 6.5Kg





WELDING EQUIPMENT

Valves for oxygen and acetylene welding setsPropane nozzles

BlowpipesDoubled pipe

Oxygen and propane pressure regulators

Flashback arrestor hose to hoseTwin hose




HYDRAULIC HAMMERS

Weight: 11- 21Kg

HYDRAULIC CORING MACHINE

Manually operatedWeight: 7.5Kg

Boring depth: 25-60mm

ASPHALT CUTTER

Engine Type: Petrol, Diesel, Electric

Cutting depth: 150-190mmManual or automatic feed




SECTION 11HYDRAULIC EQUIPMENT

HYDRAULIC CONTROL UNIT AND PUMPSFOR RAIL-PULLING CLAMP

Manual or powered operation ( Petrol, Diesel)Transport by hand, on trolley or on tracks

Pressure (bar): 35 -700Power (Kw): 3 - 5.5Tank capacity (lt): 8 - 30

HYDRAULIC CONTROL UNIT

Engine Type: petrol, diesel, electric

Starter : electric and/or hand startingVoltage (V): 220/380Power (Hp): 9-20,4

Capacity (Lt/min): 22-40Weight (Kg): 75-190

HYDRAULIC SPARE PARTS

Hydraulic pumps and motorsManual pumpsAir and oil filtersPressure-gauges and timersPiping and fittings



SECTION 11HYDRAULIC EQUIPMENT

HYDRAULIC CONTROL UNIT MOD. CSM

HIGH PRESSURE TOOLS

Motorized self-propelled unit, equipped with two drive wheels powered by the same enginethat provides hydraulic power to the different tools. Equipped with a safety device "Motor Stop".By sending pressurized oil to a lever distributor you can have 3 different uses:Oil use at 140 bars – rate of flow 22l/1’ or 30l/1’Oil use at 700 bars – rate of flow 4,6l/1’

Water use at 200 bars – rate of flow 15l/1’It follows, therefore a large and varied uses, as well as different tools (as shown above) as washing, degreasing, scraping, sheet metal, etc. .

MEDIUM PRESSURE TOOLS



IRON CUTT-OFFSPREAD

IRON CUTT-OFF ROPES CUTT-OFFSHEAR

STRAND CUTT-OFF SHEAR IRON BEND BOLT CUTTER

WASHING SANDBLASTING

PUMP IMMERSION

PUMP

CUTT-OFF

MACHINETAMPING

MACHINEPUNCH

COMPACTER

GRINDER

WALL SAW

IMPACT

WRENCH

TAMPING

MACHINE

ALTERNATOR

DRILL

WOOD SAW

TRIMMER


SECTION 12RAIL HANDLERS AND BUCKETS

RAIL HANDLING UNITCode VE0001

Lifting capacity: 3500 – 8000Kg

Weight: 460 – 1280Kg

SLEEPER HANDLINGCode VE0002

Lifting capacity : 3500-4000Kg Weight : 620-1730Kg

DIGGING BUCKETSCode VE0100

BALLAST BUCKETSCode VE0003

Lifting capacity : 3500-8000KgWeight: 460-1280Kg

COMPACTING CLAMP Code VE0004



SECTION 13OILS AND LUBRICANTS

ELECTRONIC LUBRICATION SYSTEM

Composed by: � Standard barrels with pump, control unit (for dosage and pressure) and accumulator or

transformer� Lubricating system on the rail (track-side or grooved rail) without any drilling with hoses

� Sensor for structure-borne sound

The electronic lubrication system allows a minimum lubrication thank to its exact control and definition of quality and quantity to

produce, it can be used for all types of rails and wheels.Also allows:� a rails prolonged duration as it decreases its

wear � a reduction in noise emissions� a reduction of derailment risk



heavy wear on Vignola rail flank

typical riffles on inner rail head noise level measurement result

heavy wear on grooved rail flank

result of slip/stick effect heavy wear on a switch blade



BERULUB UWS-2001(in cans of 10lt)Code OA0001

CERITOL AW 450 UWS(in cans of 10Kg)

Code OA0010

EMULSIFIABLE OIL FOR RAIL DRILLING MACHINE

(in cans of 18lt)Code OC0002

DEGREASER UNICLEAN (in cans of 20lt)Cod. OE0003

GREASE FOR BALLAST CLEANING MACHINE SCREEN

(in cans of 1Kg)Code OE0004

HIGH LUB L2MO(in cans of 25Kg)

Cod. OA1002




OIL PUMPS

SHOULDER PUMP(capacity 5lt)

Code OT0020

MANUAL PUMP (Capacity 2lt)Code OT0001

BERULUB UWS 2001




SECTION 14USED MACHINE TRADING

Visit our web-site www.geatech.it for the last news



GEATECH S.p.A. Via del Palazzino 6 40051 Altedo (BO) Italy – P. IVA 01959741206tel. +39.051.6601514 fax +39.051.6601309 www.geatech.it e-mail [email protected]

GEATECH S.p.A. reserves the right to modify the machinery described in this manual at any time and without advance notice in order to incorporate technological improvements. Consequently the specifications and drawings are presented without any commitment on our part.

Distributed by:

www.geatech.it

Date post:	24-Mar-2016
Category:	Documents
Upload:	gerben-jan-mulder
View:	238 times
Download:	3 times

Geatech Cataloque Railway Equipment

Documents