12
GEM Plus Custom-Built Low Voltage Switchboard System MCC’S - PCC’S Draw-out & fixed.
GEM PlusCustom-Built Low VoltageSwitchboard System
MCC’S - PCC’SDraw-out & fixed.
REGIONAL OFFICES
NORTH
BRANCH OFFICES
New Delhi
GE India Industrial Pvt. Ltd.71/1, Shivaji MargNew Delhi-110015Ph: (011) 45052277/8Fax: (011) 25928088
Chandigarh
GE India Industrial Pvt. Ltd.SCO No. 72 & 73, First FloorSector 8/C, Madhya MargChandigarh-160008Ph: (0172) 3982908-10Fax: (0172) 3982905
Jaipur
GE India Industrial Pvt. Ltd.448, 4th Floor, Ganapati PlazaM.I. Road, Jaipur-302001Ph: (0141) 5112802Fax: (0141) 2389012
Lucknow
GE India Industrial Pvt. Ltd.101, Ace Business Center19, Vidhan Sabha MargLucknow-226001Ph: (0522) 3203808, 3012444/666Fax: (0522) 4045909
SOUTH
Bangalore
GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199
Chennai
GE India Industrial Pvt. Ltd.Temple Tower, 6th Floor476, (New No. 672) Anna SalaiNandanamChennai-600035Ph: (044) 45070470-84Fax: (044) 45070474
Coimbatore
GE India Industrial Pvt. Ltd.No.36/6 & 7, 1st FloorAshirwad BuildingD.B.Road, R.S. PuramCoimbatore-641002Ph: (0422) 4393520 / 4393529
WEST
Mumbai
GE India Industrial Pvt. Ltd.361/362, Solitaire Corporate ParkM. Vasanji Road, ChakalaAndheri (E), Mumbai-400093Ph: (022) 40101610Fax: (022) 40101611
EAST
Kolkata
GE India Industrial Pvt. Ltd.Horizon Building, 4th Floor 57, Chowringhee RoadKolkata-700071Ph: (033) 40034056Fax: (033) 40034071
Works:GE India Industrial Pvt. Ltd.Plot No. 42/1 & 45/14Electronic City - Phase IIBangalore-560100Ph: (080) 41113000Fax: (080) 28528469/552
HO:GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199Email: [email protected]
Toll Free No:18001024343
Customer Care:[email protected]
We are committed to continuous development and improvement of our products and the specifications aresubject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
g and General Electric are registered trade marks of General Electric Co. USA©
Ahmedabad
GE India Industrial Pvt. Ltd.405-406, Kirtiman ComplexKinariwala House, Behind CitibankOff C.G. Road, Ahmedabad-380006Ph: (079) 65427385/55427389Fax: (079) 26460637
Pune
GE Money Financial Services LimitedShop No. 405-410, 4th FloorCity Point, Dhole Patil RoadPune-411001Mob: +91 9850867507
Cochin
GE India Industrial Pvt. Ltd.Mayur Business Center & MotelChittur Road, Pullepadi JunctionCochin-682035Ph: (0484) 2364139Fax: (0484) 4031400
Hyderabad
GE India Industrial Pvt. Ltd.5-2-45, Hyderbasti, RP RoadNear Gujarati High SchoolSecunderabad-500003Ph: (040) 27543162, 66311264Fax: (040) 66339272
GE, the General Electric is a world-renowned innovator and supplier of systems and components for low voltage switchgear, power distribution & industrial automation.
GE draws on this wealth of background Knowledge in designing and manufacturing of low voltage switchgear for its global and local customers.
GE Energy - Industrial Solutions, comprehensive portfolio of LV & MV Business solutions includes:
Components Equipments Motors
When we designed the new modular GEM Plus system, our customers were involved right from thebeginning. Based on customer needs assessed from the derived target market segment, the newGEM Plus provides significantly increased flexibility, reliability, security, expandability, aesthetics,and value for money.
GEM Plus type tested factory built assemblies are designed and manufactured in accordance withthe highest quality of the national/international standard applicable to low voltage equipment.
The comprehensive range of GEM Plus system applications varies from withdrawable and fixedpower control centers with air circuit breakers, motor control centers in fully draw-out, semi drawoutand fixed version for motor starter application, distribution panels in draw-out and fixed version.
The equipment can be executed with a three or four phase busbar with maximum safety level forthe operator.
MCC’S - PCC’SDraw-out & fixed.
GEM PlusCustom-Built Low Voltage Switchboard System
Salient Features of GEM Plus:
• Using a relatively few standard components it is possible to construct a custom build switchboard
• The versatility of the modular system makes it easy & quick assembly, extension and site modifications
• Standardized drawout modules are fully interchangeable
• Self locking of drawout modules after insertion
• Plugin terminals for semi drawout and sliding terminals for fully drawout control contacts
• Non-hygroscopic fire retardant barriers and DMC/SMC moulded insulators for increased safety
• Vertical busbars designed for 4 pole plug in system to provide drawout neutral isolation
• Interleaving busbar system is adopted for higher rated switchboards
• Spacious horizontal busbar chamber for better heat dissipation
GE, the General Electric is a world-renowned innovator and supplier of systems and components for low voltage switchgear, power distribution & industrial automation.
GE draws on this wealth of background Knowledge in designing and manufacturing of low voltage switchgear for its global and local customers.
GE Energy - Industrial Solutions, comprehensive portfolio of LV & MV Business solutions includes:
Components Equipments Motors
When we designed the new modular GEM Plus system, our customers were involved right from the
beginning. Based on customer needs assessed from the derived target market segment, the new
GEM Plus provides significantly increased flexibility, reliability, security, expandability, aesthetics,
and value for money.
GEM Plus type tested factory built assemblies are designed and manufactured in accordance with
the highest quality of the national/international standard applicable to low voltage equipment.
The comprehensive range of GEM Plus system applications varies from withdrawable and fixed
power control centers with air circuit breakers, motor control centers in fully draw-out, semi drawout
and fixed version for motor starter application, distribution panels in draw-out and fixed version.
The equipment can be executed with a three or four phase busbar with maximum safety level for
the operator.
MCC’S - PCC’SDraw-out & fixed.
GEM PlusCustom-Built Low Voltage Switchboard System
Salient Features of GEM Plus:
• Using a relatively few standard components it is possible to construct a custom build switchboard
• The versatility of the modular system makes it easy & quick assembly, extension and site modifications
• Standardized drawout modules are fully interchangeable
• Self locking of drawout modules after insertion
• Plugin terminals for semi drawout and sliding terminals for fully drawout control contacts
• Non-hygroscopic fire retardant barriers and DMC/SMC moulded insulators for increased safety
• Vertical busbars designed for 4 pole plug in system to provide drawout neutral isolation
• Interleaving busbar system is adopted for higher rated switchboards
• Spacious horizontal busbar chamber for better heat dissipation
Commercial • Small and large offices
• Warehouses
• Shopping malls
• Schools
• Hospitals
• Airports
• Railway stations
Industrial • Printing
• Paper
• Machinery
• Pharmaceutical
• Automotive & pulp
• Chemical industry
• Marine
• Steel
• Cement
• Fertilizer
• Sugar
Utilities • Power Plants [Thermal, Hydro & Nuclear]
• Oil & Gas on and off shore
• Petrochemical
• Water treatment plants
• Waste management
• Telecommunications
Electrical Data
Rated operating voltage Ue 415V AC
Rated frequency 50 / 60 Hz
Rated insulation voltage Ui 660V
Degree of pollution 3
Rated current [Aluminum Busbars]:
Rated current le / Ith up to 4000 A
Rated peak withstand current lpk up to 132 kA
Rated short-time withstand current lcw up to 65 kA
Rated current [Copper Busbars]:
Rated current le up to 6300 A
Rated peak withstand current lpk up to 250 kA
Rated short-time withstand current lcw up to 100 kA
Forms of separation - form 3b optional, up to form 4
StandardsType tested switchgear assemblies (TTA) IS:8623; IEC:60439-1.
Degree of Protection According to IEC60529 - External from IP 30 to IP 54; Internal from IP 2X
Steel Components Frame 2mm Thick CRCA Internal Partitions 1.5mm Thick CRCA Door & Covers 1.5mm Thick & 2mm Thick as optional
Plastic components BB Supports DMC/SMC/FRP Shrouds FRP / PVC Other components Nylon 6 / PC
Surface Protection Epoxy Powder Coated as per client’s requirement
Busbar Aluminium /Copper as per client’s requirement
Mechanical Data
ApplicationsBuildings, Machinery And Processes
Commercial • Small and large offices
• Warehouses
• Shopping malls
• Schools
• Hospitals
• Airports
• Railway stations
Industrial • Printing
• Paper
• Machinery
• Pharmaceutical
• Automotive & pulp
• Chemical industry
• Marine
• Steel
• Cement
• Fertilizer
• Sugar
Utilities • Power Plants [Thermal, Hydro & Nuclear]
• Oil & Gas on and off shore
• Petrochemical
• Water treatment plants
• Waste management
• Telecommunications
Electrical Data
Rated operating voltage Ue 415V AC
Rated frequency 50 / 60 Hz
Rated insulation voltage Ui 660V
Degree of pollution 3
Rated current [Aluminum Busbars]:
Rated current le / Ith up to 4000 A
Rated peak withstand current lpk up to 132 kA
Rated short-time withstand current lcw up to 65 kA
Rated current [Copper Busbars]:
Rated current le up to 6300 A
Rated peak withstand current lpk up to 250 kA
Rated short-time withstand current lcw up to 100 kA
Forms of separation - form 3b optional, up to form 4
StandardsType tested switchgear assemblies (TTA) IS:8623; IEC:60439-1.
Degree of Protection According to IEC60529 - External from IP 30 to IP 54; Internal from IP 2X
Steel Components Frame 2mm Thick CRCA Internal Partitions 1.5mm Thick CRCA Door & Covers 1.5mm Thick & 2mm Thick as optional
Plastic components BB Supports DMC/SMC/FRP Shrouds FRP / PVC Other components Nylon 6 / PC
Surface Protection Epoxy Powder Coated as per client’s requirement
Busbar Aluminium /Copper as per client’s requirement
Mechanical Data
ApplicationsBuildings, Machinery And Processes
Motor Control Centers
In order to ensure the highest possible degree of safety,
GE continues to conduct tests as a continuous
development program.
The results of these tests are applicable to the various
low voltage switchgear and control gear assemblies
(TTA) in accordance with IS: 8623 / IEC:60439-1
Our continuous improvement in quality and
productivity is driven through lean six sigma ways.
Our manufacturing unit is one of the certified EHS
Global Star facility.
The fulfillment of all instructions of IS: 8623 / IEC:60439-1 assures a basic level for personnel and
system protection. With GEM Plus, GE exceeds these levels as a standard. The GEM Plus low voltage
switchboard system has been subjected to extensive type tests in compliance with the standards.
GEM Plus MCC’s are used to control electric motors and other equipments from a central location, or power is to
be distributed to equipments safely and reliably. The MCC’s are available in Single Front and Double Front or
Back-to-Back.
GEM Plus MCC’s are sheet steel modular construction and each vertical section is segregated with metallic
barriers and are supplied in fully drawout, semi drawout and fixed version. Each panels are extendable both
side and can be coupled to breaker panels having higher depth either side. Double bended doors and covers
ensure the torsion free and self adhesive gaskets make the panels dust and vermin proof.
Nomenclature of MCC’s [Single & Double Front]
SIDE VIEW [D/F]
810
270540
2460
FRONT VIEW
360
2040
= 1
7 UN
IT OF
120
MM
[G1X
17]
60
FEEDER UNITS G4
C A
B L E
A L
L E Y
SIDE VIEW [S/F]
BUSBAR CHAMBER
510 510
1020510
KICK PLATE
FEEDER UNITS G1
FEEDER UNITS G5
FEEDER UNITS G6
FEEDER UNITS G1
CertificationsOperational Safety, Quality and Availability
Motor Control Centers
In order to ensure the highest possible degree of safety,
GE continues to conduct tests as a continuous
development program.
The results of these tests are applicable to the various
low voltage switchgear and control gear assemblies
(TTA) in accordance with IS: 8623 / IEC:60439-1
Our continuous improvement in quality and
productivity is driven through lean six sigma ways.
Our manufacturing unit is one of the certified EHS
Global Star facility.
The fulfillment of all instructions of IS: 8623 / IEC:60439-1 assures a basic level for personnel and
system protection. With GEM Plus, GE exceeds these levels as a standard. The GEM Plus low voltage
switchboard system has been subjected to extensive type tests in compliance with the standards.
GEM Plus MCC’s are used to control electric motors and other equipments from a central location, or power is to
be distributed to equipments safely and reliably. The MCC’s are available in Single Front and Double Front or
Back-to-Back.
GEM Plus MCC’s are sheet steel modular construction and each vertical section is segregated with metallic
barriers and are supplied in fully drawout, semi drawout and fixed version. Each panels are extendable both
side and can be coupled to breaker panels having higher depth either side. Double bended doors and covers
ensure the torsion free and self adhesive gaskets make the panels dust and vermin proof.
Nomenclature of MCC’s [Single & Double Front]
SIDE VIEW [D/F]
810
270540
2460
FRONT VIEW
360
2040
= 1
7 UN
IT OF
120
MM
[G1X
17]
60
FEEDER UNITS G4
C A
B L E
A L
L E Y
SIDE VIEW [S/F]
BUSBAR CHAMBER
510 510
1020510
KICK PLATE
FEEDER UNITS G1
FEEDER UNITS G5
FEEDER UNITS G6
FEEDER UNITS G1
CertificationsOperational Safety, Quality and Availability
Compartment and trays
The withdrawable compartments are of standard sizes G1, G2, G3, G4, G5 and G6 being multiple of G1 which is 120mm high. One panel front
can accommodate maximum of 17 such basic units of G1 size, the trays in case of fixed module G1 to G17 can be selected based on the
feeder type. Every compartment is provided with a hinged door and a FRP/PVC barrier in between the vertical busbar and tray.
810
510
540 270
VERTICAL BUSBAR
RACKING SPINDLE
INCOMING POWER TRMNLEXTENSION BUSBARFOR CABLE TERMINATION
CONTROL CONTACTSLIDING
OUTGOING POWERTERMINALS
SECTIONAL VIEW S/F
EXTENSION BUSBAR
810
1020
540 270
FOR CABLE TERMINATION
810540270
CONTROL CONTACTSLIDING
OUTGOING POWERTERMINALS
CONTROL CONTACTPLUG-IN
VERTICAL BUSBAR
RACKING SPINDLE
OUTGOING POWER TRMNL
INCOMING POWER TRMNL
SECTIONAL VIEW D/F
Outgoing with-drawable units
Drawout units are provided with spring loaded incoming power contact connecting the unit to vertical busbars
and outgoing contact for the cables. Each drawout unit comprises the following locking devices:
• An automatic door interlock, which prevents the door being opened when the switch is in the ON position.
• A latch, to prevent the unit from being dropped accidentally if removed too quickly.
• Plug-in / sliding contact block features available to enable remote control and signaling.
• A test position is also available whenever required to facilitate testing of control circuits with functional
interlock without energizing the power unit.
The trays are provided with guides and low friction sliding devices which can smoothly insert and withdraw
along with the guide rails.
Outgoing non-drawable units
In this design feeder components are fitted directly into the cubicle and both power and control terminals are
in fixed version.
Main Busbar system
The main / horizontal busbars are located in a separate compartment at the top of the switchboard. The spacious horizontal busbar compartment has a degree of protection of IP 54 for upto 1600A and IP 42 for above rating. The phase bars and neutral bar are available for current ratings from 500 up to 4000A with Al and 6300A with Cu. They are secured by SMC/DMC busbar supports and can be easily extendable on both sides. Unique arrangement of interleaving system is adopted for higher rated panels to not only achieve better dynamic and thermal withstand capacity but also to reduce temperature rise.
Horizontal auxiliary supply system
Auxiliary supply system busbars are located in the HBB chamber separated from HBB, Up to 12 Nos. auxiliary bars with a current rating of 50A are available.
Vertical distribution busbar system
GEM Plus MCC with drawout/fixed outgoing units vertical busbars are branched from the main busbar system. The vertical busbars are located behind the equipment modules. Vertical busbars are available for
current rating from 630A to 1440A. VBB are covered with FRP/PVC feeder shrouds having the opening only for the incoming terminals. Safety shutters are available optionally.
Earth busbar system
GEM Plus switchboards are supplied with a horizontal earth busbar 50x10mm Al or 50x6mm Cu and a vertical earth busbar 20x5mm runs along with the height of the cable alley in drawout panels and is connected to the main horizontal earth busbar. Each drawout modules are fitted with a spring loaded scraping earth which make first and break last for safety to operating personnel.
Cable-entry compartment
A separate, lockable cable-alley compartment, along with the entire height of the feeder compartment, is provided at the righthand side for power and control cable termination. On the side wall, cable ladders are available for cable clamps. The cable-alley compartment is isolated from the feeder compartments. The standard cable-alley compartment width is 270 mm. The compartment is provided with an undrilled, removable gland plate at the bottom of the cubicle.
Busbar Rating Height mm Width mm Depth mm Cable Entry
SF / DF S/F D/F
Up to 1250A 2460/2220 810 510 1020 Bottom
690 1020 Top
1600A 2460/2220 810 690 1020 Bottom
1020 1200 Top
2000~4000A 2460/2220 810 1020 1020 Bottom
1200 1350 Top
Overall Dimensions of GEM Plus MCC’s
Compartment and trays
The withdrawable compartments are of standard sizes G1, G2, G3, G4, G5 and G6 being multiple of G1 which is 120mm high. One panel front
can accommodate maximum of 17 such basic units of G1 size, the trays in case of fixed module G1 to G17 can be selected based on the
feeder type. Every compartment is provided with a hinged door and a FRP/PVC barrier in between the vertical busbar and tray.
810
510
540 270
VERTICAL BUSBAR
RACKING SPINDLE
INCOMING POWER TRMNLEXTENSION BUSBARFOR CABLE TERMINATION
CONTROL CONTACTSLIDING
OUTGOING POWERTERMINALS
SECTIONAL VIEW S/F
EXTENSION BUSBAR
810
1020
540 270
FOR CABLE TERMINATION
810540270
CONTROL CONTACTSLIDING
OUTGOING POWERTERMINALS
CONTROL CONTACTPLUG-IN
VERTICAL BUSBAR
RACKING SPINDLE
OUTGOING POWER TRMNL
INCOMING POWER TRMNL
SECTIONAL VIEW D/F
Outgoing with-drawable units
Drawout units are provided with spring loaded incoming power contact connecting the unit to vertical busbars
and outgoing contact for the cables. Each drawout unit comprises the following locking devices:
• An automatic door interlock, which prevents the door being opened when the switch is in the ON position.
• A latch, to prevent the unit from being dropped accidentally if removed too quickly.
• Plug-in / sliding contact block features available to enable remote control and signaling.
• A test position is also available whenever required to facilitate testing of control circuits with functional
interlock without energizing the power unit.
The trays are provided with guides and low friction sliding devices which can smoothly insert and withdraw
along with the guide rails.
Outgoing non-drawable units
In this design feeder components are fitted directly into the cubicle and both power and control terminals are
in fixed version.
Main Busbar system
The main / horizontal busbars are located in a separate compartment at the top of the switchboard. The spacious horizontal busbar compartment has a degree of protection of IP 54 for upto 1600A and IP 42 for above rating. The phase bars and neutral bar are available for current ratings from 500 up to 4000A with Al and 6300A with Cu. They are secured by SMC/DMC busbar supports and can be easily extendable on both sides. Unique arrangement of interleaving system is adopted for higher rated panels to not only achieve better dynamic and thermal withstand capacity but also to reduce temperature rise.
Horizontal auxiliary supply system
Auxiliary supply system busbars are located in the HBB chamber separated from HBB, Up to 12 Nos. auxiliary bars with a current rating of 50A are available.
Vertical distribution busbar system
GEM Plus MCC with drawout/fixed outgoing units vertical busbars are branched from the main busbar system. The vertical busbars are located behind the equipment modules. Vertical busbars are available for
current rating from 630A to 1440A. VBB are covered with FRP/PVC feeder shrouds having the opening only for the incoming terminals. Safety shutters are available optionally.
Earth busbar system
GEM Plus switchboards are supplied with a horizontal earth busbar 50x10mm Al or 50x6mm Cu and a vertical earth busbar 20x5mm runs along with the height of the cable alley in drawout panels and is connected to the main horizontal earth busbar. Each drawout modules are fitted with a spring loaded scraping earth which make first and break last for safety to operating personnel.
Cable-entry compartment
A separate, lockable cable-alley compartment, along with the entire height of the feeder compartment, is provided at the righthand side for power and control cable termination. On the side wall, cable ladders are available for cable clamps. The cable-alley compartment is isolated from the feeder compartments. The standard cable-alley compartment width is 270 mm. The compartment is provided with an undrilled, removable gland plate at the bottom of the cubicle.
Busbar Rating Height mm Width mm Depth mm Cable Entry
SF / DF S/F D/F
Up to 1250A 2460/2220 810 510 1020 Bottom
690 1020 Top
1600A 2460/2220 810 690 1020 Bottom
1020 1200 Top
2000~4000A 2460/2220 810 1020 1020 Bottom
1200 1350 Top
Overall Dimensions of GEM Plus MCC’s
Power Control Centers
GEM Plus PCC’s are used as main LT switchboards for distribution and control of power. The PCC panels are
offered either in single tire or two tire configuration. PCC’s are suitable for coupling with single front and double
front MCC’s to make the switchboard as PMCC.
GEM Plus PCC’s are sheet steel modular construction, each PCC’s are provided with segregated compartment for
safety i.e. Metering chamber, Circuit breaker chamber and Relay chamber, each sections having its own doors.
Double bended doors and covers ensure the torsion free and self adhesive gaskets make the panels dust and
vermin proof.
Spacious bottom cable space are provided and are also suitable for either cable or busduct entry from
top/bottom. For single core cables, aluminium gland plates are provided to eliminate the magnetic effect.
Barriers are provided between the incoming and outgoing terminals of ACB for added safety.
540
780
780
360
870
BUSBAR CHAMBER
BREAKER CHAMBER
RELAY CHAMBER
1350 / 1500
1020330 / 480
FRONT VIEW SIDE VIEW [D/F]
BREAKER CHAMBER
CONT
ROL/
MET
ERIN
G CH
AMBE
RCO
NTRO
L/M
ETER
ING
CHAM
BER
NOMENCLATURE OF PCC's [TWO TIRE]
600 / 810 / 960 1350 / 1500 / 1710
330 /480/ 690
SIDE VIEW [D/F]FRONT VIEW
750
810
540
360
2460
BUSBAR CHAMBER
METERING CHAMBER
BREAKER CHAMBER
RELAY CHAMBER
1020
NOMENCLATURE OF PCC's [SINGLE TIRE]
Busbar Rating Height mm Width mm Depth mm
PCC I/C & O/G B/C I/C Busduct
Entry
Up to 630A 2460 600 1020 1350 1350
800~1250A 2460 600 1350 1350 1500
1600A 2460 810 1350 1350 1500
2000~4000A 2460 810 1710
960 1710 1710
Two tire 2460 870 1500
Up to 1250A
Two tire 2460 870 1500
2000A
Overall Dimensions of GEM Plus PCC’s
Power Control Centers
GEM Plus PCC’s are used as main LT switchboards for distribution and control of power. The PCC panels are
offered either in single tire or two tire configuration. PCC’s are suitable for coupling with single front and double
front MCC’s to make the switchboard as PMCC.
GEM Plus PCC’s are sheet steel modular construction, each PCC’s are provided with segregated compartment for
safety i.e. Metering chamber, Circuit breaker chamber and Relay chamber, each sections having its own doors.
Double bended doors and covers ensure the torsion free and self adhesive gaskets make the panels dust and
vermin proof.
Spacious bottom cable space are provided and are also suitable for either cable or busduct entry from
top/bottom. For single core cables, aluminium gland plates are provided to eliminate the magnetic effect.
Barriers are provided between the incoming and outgoing terminals of ACB for added safety.
540
780
780
360
870
BUSBAR CHAMBER
BREAKER CHAMBER
RELAY CHAMBER
1350 / 1500
1020330 / 480
FRONT VIEW SIDE VIEW [D/F]
BREAKER CHAMBER
CONT
ROL/
MET
ERIN
G CH
AMBE
RCO
NTRO
L/M
ETER
ING
CHAM
BER
NOMENCLATURE OF PCC's [TWO TIRE]
600 / 810 / 960 1350 / 1500 / 1710
330 /480/ 690
SIDE VIEW [D/F]FRONT VIEW
750
810
540
360
2460
BUSBAR CHAMBER
METERING CHAMBER
BREAKER CHAMBER
RELAY CHAMBER
1020
NOMENCLATURE OF PCC's [SINGLE TIRE]
Busbar Rating Height mm Width mm Depth mm
PCC I/C & O/G B/C I/C Busduct
Entry
Up to 630A 2460 600 1020 1350 1350
800~1250A 2460 600 1350 1350 1500
1600A 2460 810 1350 1350 1500
2000~4000A 2460 810 1710
960 1710 1710
Two tire 2460 870 1500
Up to 1250A
Two tire 2460 870 1500
2000A
Overall Dimensions of GEM Plus PCC’s
GEM PlusCustom-Built Low VoltageSwitchboard System
MCC’S - PCC’SDraw-out & fixed.
REGIONAL OFFICES
NORTH
BRANCH OFFICES
New Delhi
GE India Industrial Pvt. Ltd.71/1, Shivaji MargNew Delhi-110015Ph: (011) 45052277/8Fax: (011) 25928088
Chandigarh
GE India Industrial Pvt. Ltd.SCO No. 72 & 73, First FloorSector 8/C, Madhya MargChandigarh-160008Ph: (0172) 3982908-10Fax: (0172) 3982905
Jaipur
GE India Industrial Pvt. Ltd.448, 4th Floor, Ganapati PlazaM.I. Road, Jaipur-302001Ph: (0141) 5112802Fax: (0141) 2389012
Lucknow
GE India Industrial Pvt. Ltd.101, Ace Business Center19, Vidhan Sabha MargLucknow-226001Ph: (0522) 3203808, 3012444/666Fax: (0522) 4045909
SOUTH
Bangalore
GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199
Chennai
GE India Industrial Pvt. Ltd.Temple Tower, 6th Floor476, (New No. 672) Anna SalaiNandanamChennai-600035Ph: (044) 45070470-84Fax: (044) 45070474
Coimbatore
GE India Industrial Pvt. Ltd.No.36/6 & 7, 1st FloorAshirwad BuildingD.B.Road, R.S. PuramCoimbatore-641002Ph: (0422) 4393520 / 4393529
WEST
Mumbai
GE India Industrial Pvt. Ltd.361/362, Solitaire Corporate ParkM. Vasanji Road, ChakalaAndheri (E), Mumbai-400093Ph: (022) 40101610Fax: (022) 40101611
EAST
Kolkata
GE India Industrial Pvt. Ltd.Horizon Building, 4th Floor 57, Chowringhee RoadKolkata-700071Ph: (033) 40034056Fax: (033) 40034071
Works:GE India Industrial Pvt. Ltd.Plot No. 42/1 & 45/14Electronic City - Phase IIBangalore-560100Ph: (080) 41113000Fax: (080) 28528469/552
HO:GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199Email: [email protected]
Toll Free No:18001024343
Customer Care:[email protected]
We are committed to continuous development and improvement of our products and the specifications aresubject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
g and General Electric are registered trade marks of General Electric Co. USA©
Ahmedabad
GE India Industrial Pvt. Ltd.405-406, Kirtiman ComplexKinariwala House, Behind CitibankOff C.G. Road, Ahmedabad-380006Ph: (079) 65427385/55427389Fax: (079) 26460637
Pune
GE Money Financial Services LimitedShop No. 405-410, 4th FloorCity Point, Dhole Patil RoadPune-411001Mob: +91 9850867507
Cochin
GE India Industrial Pvt. Ltd.Mayur Business Center & MotelChittur Road, Pullepadi JunctionCochin-682035Ph: (0484) 2364139Fax: (0484) 4031400
Hyderabad
GE India Industrial Pvt. Ltd.5-2-45, Hyderbasti, RP RoadNear Gujarati High SchoolSecunderabad-500003Ph: (040) 27543162, 66311264Fax: (040) 66339272
![Chapter 1 · p1: gem/sph p2: gem/sph qc: gem/abe t1: gem jwbk225-01[01-44] november 25, 2007 13:13 char count= 0 chapter 1 the psychology of careers in industrial and organizational](https://static.documents.pub/doc/80x56/5ec907ec69f22474c269b8b1/chapter-1-p1-gemsph-p2-gemsph-qc-gemabe-t1-gem-jwbk225-0101-44-november.jpg)
