1

Gen2 Regen Upgrade

Xizi Otis, April 2010

Summary

• Gen2 Regen ≤≤≤≤1000kg,1.75m/s configuration upgrade– Controller and drive upgrade to ACD2 MRL – E&I panel change to mini size– Introduce OTIS PM door operator NGSOK as Standard door operator – Layout changes accordingly

• Gen2 Regen extended to 2000kg, 1.75m/s – Added Regen function to 1150~2000kg as standard– Introduced Otis optimized Gen2 machine– Introduced OTIS E3 qualified HN6000 progressive safety – Other configuration (Controller& drive, E&I panel, door operator) as per Gen2 Regen ≤1000kg

• Gen2 (1150~2000kg up to 1.75m/s,Non-regen) completely phase out

Note: Gen2 Regen up to 2000kg is officially sales release on April 1st 2010 and Gen2 sales phase out at the same time

Configuration Upgrade

� Gen2 Regen ≤1000kg configuration upgrade

� Gen2 Regen extended to 2000kg to replace GeN2

Machine Upgrade

- OTIS optimized Gen2 Machine from the samesupplier as GeN2

- Noise and vibration performance is improved- Otis Optimized Gen2 machine for ≤1000kg will be introduced later once it’s available

ABA20220AS

GeN2 GeN2-Regen

Apply to 1150kg to 2000kg Gen2 Regen only

ABA20220BD

Controller Upgrade

OH-CON4424 (For GeN2)OH-CONB604MRL(for previous Gen2 Regen up to 1000kg)

ACD2-MRL Controller

GeN2GeN2-Regen

Apply to 630kg to 2000kg Gen2 Regen

-OTIS global new controller for MRL product

-More compact

- OH-CONB604B MRL will be phase out

&Previous Gen2 Regen up to 1000kg

Regen function is added

ACD2 MRL regen drive

Apply to 630kg to 2000kg Gen2 Regen

Non-Regen drive(OH-CON4424)

Otis Regen drive for previous Gen2 Regen up to 1000kg

-OTIS global integrated regen

drive for MRL

- More compact

- OH-CONB604B MRL will be phase out

GeN2 GeN2-Regen&Previous Gen2 Regen up to 1000kg

E&I PANEL Upgrade

Min E&I PANEL

GeN2& Previous Gen2 Regen up to 1000kg

GeN2-Regen

Apply to 630kg to 2000kg Gen2 Regen

Door Operator upgrade

STD: NGSOK

- NGSOK is OTIS global PM operator - DO2000 is still optional

GeN2 GeN2-Regen

STD: AT120

Apply to 630kg to 2000kg Gen2 Regen

&Previous Gen2 Regen up to 1000kg

Safety Gear Upgrade

STD:HN6000B/C

- HN6000B/C are OTIS global E3 safety components- Bigger running clearance. Ride quality is improved and false tripping is eliminated- 9672D/E are still optional

STD:9672D/E

GeN2GeN2-Regen

Apply to 1150kg to 2000kg only

Layout Changes

New Controller & Drive Architecture

GeN2-Regen(ACD2 MRL)

New arrangement is easier for controller and drive inspection

630kg~2000kg

Previous Gen2 Regen(OH-CONB604MRL controller)

GeN2(OH-CON4424 Controller)

E&I PANEL cutout size

GeN2 GeN2-Regen

Min E&I PANEL size reduced, the cutout 1600(H)x250(W).

Top floor

Apply to 630kg to 2000kg Gen2 Regen

New Bracket Spacing for top floor

GeN2 Gen2-Regen

-Stronger rail bracket made machine more stable- Noise and vibration is improved

Top floor brackets Apply to 630kg to 2000kg Gen2 Regen

Back up

ACD2 MRL Introduction

PRODUCT DESCRIPTION

� Integrated Regen controller

�Improve aesthetics and performance

�OTIS WWE (World Wide Engineering) lead design

�OTIS global source and SSI management

210W x 540H x 90D 320W x1300H x 160D

Drive E&I Panel Controller

Duty Table

Controller Operational Parameters

75Max Rise (m)

Photo-sensorPosition Reference

Opt. GeN2Machine

Analog LWDLWD

NGSOK/AT120/AT400/DO2000

Door

OVFR2B-402,403,404,OVFR1A-406

Drive

Max 8 Car GroupOperation Control

GCS -ENBaseline Product

ValuesFeature

MRO*Rescue operation

OTIS SVTService Tool

32Maximum # of Opening

24Maximum # of Stops

2000Max Duty (kg)

1.75Max Speed (m /s)

ValuesFeature

Note: MRO function is standard. ARO function should be offered as an optional function after June 2010.

Performance

A95,11

PK-PK,14Max Vertical Vibrations (mg) @ normal speed

Average 52Noise at Top landing with door closed. (dB)

52Max In Car Noise (dB), Fan Off

± 3/ ± 5Stopping Accuracy (mm) Typical/Maximum

±5Speed Tolerance (%)

150@1.0m/s

180@ 1.5m/s ~1.75m/s, 40% duty cycle

Maximum Starts Per Hour

1.0Maximum Jerk (PMT measurement: m/s3)

<1.2Maximum Acceleration (PMT measurement: m/s2)

11Max Floor Distance (m)

350 @ 1.0m/s500 @ 1.5m/s ~1.75m/s

Min. Floor Distance (mm)

TargetParameter

System Requirement

380/400/415/440Vac ±10%

50/60Hz ±2HzFrequency

Supply Voltage

� Power Supply

Note: TN-S (five wires net = 3 phases +neutral +earth)For 220/460V power supply, there need an extended additional transformer in system.

Application Environment

� Max Elevation: – 1000m: full performance– 2000m: Reduced performance(1% of rated running current per 100m)

� Operating Humidity

– 95% non-condensing

� Operating Temperature range (machine room):– 0~45℃

Product Advantages

� Operational controller based on GECB (Global Elevator Control Board)

+ Motion controller based on GDCB (Global Drive Control Board)

� CAN-bus communication interface between operational and motion controllers

� External system interface following global SIMBA

� Energy effectiveness from the regenerative drive

� Mini E&I Panel

� Easily expandable computing core with high-speed 32bit CPU