Date post: | 07-Aug-2018 |
Category: |
Documents |
Upload: | edgargarcia |
View: | 231 times |
Download: | 0 times |
of 15
8/20/2019 General Catalog Juki
1/40
General CatalogIndustrial Sewing Machines
2015
8/20/2019 General Catalog Juki
2/40
Pictographs for Function
Needle
2-needle
Organized splitneedle bar
3-needle
4-needle
Differential-feed
Variable top-feed
R- drive
X-Y drive
Belt-feed
Eyeletbuttonholing
Bartacking
Button sewing
Button sewing
with neck wrapping
Belt-loop attaching
Pocket welting
Hook
Horizontal-axis hook(large)
Horizontal-axis hook(3 fold-capacity)
Vertical-axis hook(large)
Stitch system
Lockstitch
Doublechainstitch
Single-thread
chainstitch
Pinpoint stitch
Feed
Bottom-feed
Bottom andvariable top-feed
Needle-feed
Stitch shape
Zigzag stitching
Lockstitchbuttonholing
Function
Cloth cutting knife
Cloth puller
Automaticthread trimmer
Stacker
Active tension
Dry-head,Intelligent Direct-driveSewing Machine
8/20/2019 General Catalog Juki
3/40
CON T EN T SCatalog of each model is also available.
For further details, please refer to each catalog.
1-needle, Lockstitch Machine
2-needle, Lockstitch Machine
Overlock / Safety Stitch Machine
Zigzag Stitching Machine
Post-bed Sewing Machine
Chainstitch Machine
Button Sewing Machine
Buttonholing Machine
Bartacking Machine
Shape-tacking Machine
Computer-controlled Cycle Machine
Automatic Machine
Software
01
02
03
04
05
DDL-9000B
DDL-9000B-DS / PBN
DDL-900A
DDL-8700B-7
DDL-8700-7,8700
DDL-5600N-7, 5600NDDL-5550N-7, 5550N
DLU-5494N-7/IT-100A
DLU-5490N-7, 5490N
DLN-9010A
DLN-5410N-7, 5410N
DLN-6390-7, 6390
DLM-5400N-7
DLM-5200N
DMN-5420N-7
DLD-5430N-7, 5430N
20
21
22
MH-481-5, 481
MH-484-5, 484
MH-486-5
MH-380, 382
MS-1190, 1261
MP-200N
ML-111U
MF-3620
MS-3580
23LK-1903BB, 1903B, 1903B/BR35
MB-1800A/BR10, 1800S
MB-1377, 1373
24
25
LBH-1790AB, 1790A, 1795A, 1796A
LBH-780
MEB-3200
MEB-3810
26LK-1900BB, 1900B, 1901B, 1902B
27LK-1910, 1920, 1930
28
29
AMS-210EN-1306, 1510, 2210
AMS-221EN-2516, 3020
AMS-210EN-1306/7450
AMS-221ENTS3020/X90002AMS-224EN-4530, 6030
30
31
32
APW-895S, 895L, 896
AP-876, 874
AB-1351
MOL-254
AMB-289
AC-172N-1790
ASN-690
AE-200ALA, 200ALD
33PM-1
06
07
LH-3528A-7, 3528A
LH-3578A-7, 3578A
LH-3568A-7, 3568A
LH-3588A-7, 3588A
LH-4128
08
09
10
MO-6700DA Series
MO-6700S Series
MO-6714S/LB-6
MO-6700DA-DD, 6700S-DD
/X81056, /X81057, /X81059
MO-6800S Series
MO-6900S Series
MO-6900R SeriesMO-6900J Series
MO-6900G Series
MO-6900C Series
MO-6914C-BD6-307/X81028
13
14
11
12
LZ-2290A-SR-7
LZ-2290A-DU-7, 2290A-DU
LZ-2290A-DS-7, 2290A-DS
LZ-2290A-SU-7, 2290A-SU
LZ-2290A-SS-7, 2290A-SS
LZ-2280A
LZ-2284A-7, 2284A
LZ-2287ALZ-2282N-7, 2282N
LZ-2285N, 2286N
LZ-2284NU-7, 2284NU, 2280NU
LZ-2284C-7
LZ-271, 391N
15DP-2100
LT-591
Coverstitch Machine
16
18
19
17
MF-7500-U11(/UT), MF-7500D-U11(/UT)
MF-7500-C11, MF-7500D-C11
MF-7500-E11, MF-7500D-E11
MF-7900-U11(/UT), MF-7900D-U11(/UT)
MF-7900-H11(/UT)
MF-7900-H22,23(/UT), MF-7900D-H22,23(/UT)MF-7900D-H24/UT, H25/UT
MF-7900-E11(/UT), MF-7900D-E11(/UT)
MF-7900-E22(/UT), E23(/UT)
MF-7200D-U10, K10
8/20/2019 General Catalog Juki
4/40
✽The max. sewing speed should be set at 4,000sti/min or less when the machine is used with a stitch length of more than 4mm.
Direct-drive, High-speed, 1-needle Lockstitch Machine
DDL-9000BJUKI does its utmost to perfect the ease of operation of itsmachines while promising optimal seam quality, optimal
productivity, and minimum energy consumption.
Now, JUKI has launched an advanced 1-needle lockstitchmachine with unrivalled performance, a successor to the
DDL-9000/-9000A. This is the newest flagship lockstitch
machine from JUKI, a manufacturer which aims for genuinequality every minute of the day.
Application
Lubrication
Max. sewing speed
Max. stitch length
Needle
Lift of the presser foot
Model name DDL-9000B-SS DDL-9000B-SH
Minute-quantity lubrication
5mm✽
Semi-dry
5mm✽
DB×1 (#11) #9#18
DDL-9000B-MA DDL-9000B-MS DDL-9000B-DS
Medium-weight
5,000sti/min
DB×1 (#11) #9#18
Heavy-weight
4,500sti/min
DB×1 (#21) #20#23
Light-weight
5,000sti/min
4mm
DB×1 (#9) #8#11
By hand: 5.5mm, By knee: 15mm, Auto: 8.5mm
Medium-weight
5,000sti/min
Medium-weight
Fully-dry
4,000sti/min
DDL-9000B
✽DDL-9000B-DS / PBN is available on a custom order. Contact JUKI for how to place an order.
DDL-9000B-DS/PBN
DDL-9000B-DS/PBN
Fully-dry head, Direct-drive, High-speed, 1-needle, Lockstitch Machine
(bird's nest prevention type)
The newly-developed model totally eliminates "bird's nests at
the starting of sewing", which have been a conventionallyinevitable factor when using machines with a thread trimmer.
The length of thread remaining at the end of sewing is
shortened. With these two capabilities, the machine
demonstrates its improved performance in the sewing of partsin which the starting and end points of a seam are visible, such
as in the case of sewing name labels, topstitching and
counterstitching collar bottoms.
Application
Lubrication system
Max. sewing speed
Max. stitch length
Lift of the presser foot
Needle
DDL-9000B-DS / PBN
Medium-weight
Fully-dry type (no lubrication is required)
4,000sti/min
4mm
By knee: 15mm
DB×1 (#11) #9#18, 134 (Nm75) Nm65Nm110
Model name
Application
Lubrication
Max. sewing speed
Max. stitch length
Needle
Lift of the presser foot
DDL-900A
Light- to medium-weight
“DRY” Oil Pan System
5,000sti/min
4mm
DB×1 (#14) #9#18, 134 (Nm90)
By hand: 5.5mm, By knee: 13mm
Model name
Direct-drive, High-speed, 1-needle, Lockstitch Machine (“dry” oil pan system)
DDL-900AIn order to prevent oil stains on sewing products, the sewing
machine has adopted the “DRY” Oil Pan System which is
integrated into the sewing machine bed. The needle bar islubricated with a smaller quantity of oil as compared with the
conventional model. In addition, oil which externally splashes is
shielded by the newly-developed frame oil recovery
mechanism and automatic oil circulation mechanism. The newstructure contributes to the achievement of the maximum
sewing speed of 5,000sti/min and also to increased
productivity.
DDL-900A
1-needle, Lockstitch Machine
01
8/20/2019 General Catalog Juki
5/4002
1-needle, Lockstitch Machine
The DDL-8700B-7 is a direct-drive, high-speed, lockstitch
machine with an automatic thread trimmer that sews graceful,
high-quality seams on many kinds of fabric.
The sewing machine has been integrated with the control boxand the operation panel for ease of use.
DDL-8700BS-7-WB
DDL-8700B-7
Direct-drive, High-speed, 1-needle, Lockstitch Machine
Application
Max. sewing speed
Max. stitch length
Lift of the presser foot
Needle
Medium-weight
5,000sti/min
4mm
Heavy-weight
4,000sti/min
5mm
DB×1 (#14)#9~#18,
134(Nm90)
DB×1 (#21)#19~#23,
134(Nm130)
DP×5 (#21)#20~#23
Model name DDL-8700BS-7
By hand: 5.5mm, By knee: 13mm
DDL-8700BH-7
Jeans
DDL-8700BJ-7
DDL-8700-7DDL-8700
1-needle, Lockstitch Machine
By thoroughly investigating and modifying the sewing mechanisms in order
to achieve low-tension sewing, the machine flexibly responds to variouskinds of materials and produces beautiful seams of consistent quality.
Model name
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
DDL-8700-7 DDL-8700
Medium-weight
5,000sti/min 5,500sti/min
4mm 5mm
By knee: 13mm
DB×1 (#14) #9#18,134 (Nm90)
DDL-8700A-7, 8700A
Light-weight
4,000sti/min
DDL-8700H-7, 8700H
Heavy-weight
4mm 5mm
By knee: 9mm By knee: 13mm
DA×1 (#9) #9#11,134 (Nm65)
DB×1 (#21) #19#23,134 (Nm130) DDL-8700-7
DDL-5600N-7DDL-5600N
1-needle, Lockstitch Machine with Double-capacity Hook
The machine is capable of making well-tensed, beautifullyfinished seams, regardless of the type of heavy materials.
Model name
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
DDL-5600NJ-7, 5600NJ DDL-5600NL-7, 5600NL
Jeans
4,000sti/min
5mm
Heavy-weight
3,000sti/min
8mm
By knee: 13mm
DB×1 (#21) #20#23, 134 (Nm130) DDL-5600N-7
8/20/2019 General Catalog Juki
6/40
1-needle, Lockstitch Machine
03
DLU-5494N-7/IT-100A (with program shirring control device)
DLU-5490N-7DLU-5490N
1-needle, Bottom and Variable Top-feed, Lockstitch Machine
With its bottom and variable top-feed mechanism, the machine
widely adapts to diversified applications and helps promote the
production of upgraded-quality products while increasing efficiency.
With its microcomputer control, the machine achieves high-qualityshirring with consistency. The machine enables even
inexperienced operators to perform shirring operation smoothly
and easily.
Model name DLU-5494N-7/IT-100A
Max. sewing speed
Max. stitch length
Max. top-feed amount
Presser foot
Needle
4,000sti/min
5mm (forward), 3mm (backward)
8mm (top feed amount varies
depending on the type of gauge)
By knee: 13mm
✽When using auto-lifter AK85: 9mm
DB×1 (#14), 134 (Nm90)
DLU-5490N-7, 5490N
4,500sti/min
5mm
8mm
By knee: 13mm
DB×1 (#14), 134 (Nm75) DLU-5494N-7/IT-100A
DLN-9010A
Light- to medium-weight
5,000sti/min
4.5mm✽
By knee: 15mm (max.), Auto: 10mm
DB×1 (#14) #9#18, 134 (Nm90) Nm65Nm110
Model name
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
DLN-9010A-SS
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
Heavy-weight
4,000sti/min
4.5mm
By knee: 15mm (max.), Auto: 10mm
DB×1 (#21) #20#23, 134 (Nm130) Nm120Nm160
Model name DLN-9010A-SH
✽The max. sewing speed should be set at 4,000sti/min or less when the machine is
used with a stitch length of more than 3.5mm.
DLN-9010A
Direct-drive, High-speed, Needle-feed, Lockstitch Machine
The machine is a needle-feed type, categorized under theDDL-9000B series, that has been highly evaluated as thetop-of-the-line lockstitch machine with a thread trimmer.
DDL-5550N-7DDL-5550N
1-needle, Lockstitch Machine
The thread take-up mechanism, feed mechanism, thread paths
and hook have been further improved to enhance
responsiveness to material changes and to ensure consistentstitch quality.
Model name
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
DDL-5550NA-7, 5550NA DDL-5550NH-7, 5550NH
Light-weight Heavy-weight
4,000sti/min
4mm 5mm
By knee: 9mm By knee: 13mm
DA×1 (#9), 134 (Nm65) DB×1 (#21), 134 (Nm130)
Model name
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
DDL-5550N-7 DDL-5550N
Medium-weight
5,000sti/min 5,500sti/min
4mm 5mm
By knee: 13mm
DB×1 (#14), 134 (Nm75) DB×1 (#14), 134 (Nm90)
DDL-5550N-7
8/20/2019 General Catalog Juki
7/40
1-needle, Lockstitch Machine
04
DLN-5410N-7
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
Light- to medium-weight
5,000sti/min
4mm
DB×1 (#14), 134 (Nm90)
Medium- to heavy-weight
4,000sti/min
4.5mm
DB×1 (#21), 134 (Nm130)
Model name DLN-5410N-7, 5410N DLN-5410NH-7, 5410NH
By knee: 13mm
By knee: 13mm
Jeans
4,000sti/min
4.5mm
Heavy-weight(long stitch length type)
3,000sti/min
6mm
Application
Max. sewing speed
Max. stitch length
Presser foot
Needle
Model name DLN-5410NJ-7 DLN-5410NL
DB×1 (#21), 134 (Nm130)DB×1 (#21), 134 (Nm130)
DLN-5410N-7DLN-5410N
1-needle, Needle-feed, Lockstitch Machine
The machine produces seams with accurate stitch length andprevents slippage of the upper fabric. The machine ensuresbeautiful seam quality free from stitch gathering, even when ahard-to-feed material is used.
Max. sewing speed
Stitch length
Needle
Presser foot
Binder open / close type
Cylinder-bed diameter
5,000sti/min
UY180GVS Nm140 range of use:Nm90Nm150 (equivalent to #14#22.5)
180mm
Max. 14mm
Standard gears: 3.2mm (2.8mm) /Supplied gears: 2.3mm, 3.6mm /
Optional gears: 2.1mm, 2.5mm, 4.2mm(utilized by changing pitch conversion gears)
Model name DLN-6390-7 DLN-6390
Driven by air cylinder Manual type
4,500sti/min
4mm
By knee: 10mm
DB×1 (#14) #9#18, 134 (Nm90)
4mm
Max. sewing speed
Max. stitch length
Presser foot
Needle
Max. thickness of the
material to be cut
Model name DLM-5400N-7
Max. sewing speed
Max. stitch length
Presser foot
Needle
4,500sti/min
5mm
By knee: 10mm
DB×1 (#14), 134 (Nm90)
Model name DLM-5200N
DLN-6390-7DLN-6390
High-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook
The cylinder-bed lockstitch machine with a thread trimmer is
designed for hemming the bottom of jeans, casual pants andwork uniforms.
DLM-5400N-7 (bottom-feed)DLM-5200N
1-needle, Lockstitch Machine with Vertical Edge Trimmer
The knife is sharp enough to cut any type of mamaterial. Theone-touch utility knife lever enhances the comfort of
operation.
DLM-5400N-7
DLN-6390-7
8/20/2019 General Catalog Juki
8/40
1-needle, Lockstitch Machine
05
DMN-5420N-7
5,000sti/min
5mm
By knee: 10mm
DB×1 (#14) #9#18, 134 (Nm90)
4mm
Max. sewing speed
Max. stitch length
Presser foot
Needle
Max. thickness of the
material to be cut
Model name DMN-5420N-7
DMN-5420N-7
1-needle, Needle-feed, Lockstitch Machine with Vertical Edge Trimmer
The machine is a needle-feed type.
The knife is sharp enough to cut any type of material.
DLD-5430N-7DLD-5430N
1-needle, Differential-feed, Lockstitch Machine
With its highly reliable bottom-differential-feed mechanism,
the machine promotes the production of upgraded-quality
products while increasing efficiency.
✽This ratio applies provided that the stitch length does not exceed 2.5mm.
Model name
Max. sewing speed
Max. stitch length
Max. top-feed amount
Needle bar stroke
Presser foot
Needle
DLD-5430N-7, 5430N
4,500sti/min
5mm
Shirring 1:1.5 (max. 1:3✽), Stretching 1:0.5
30.7mm
By knee: 13mm
DB×1 (#14), 134 (Nm90)
DLD-5430N-7
8/20/2019 General Catalog Juki
9/4006
2-needle, Lockstitch Machine
Application
Max. sewing speed
Max. stitch length
Needle gauge
Presser foot
Needle
Model name LH-3528ALH-3528A-7
A: Light-weight, F: Foundation, S: Medium-weight, G: Jeans and heavy-weight
LH-3578ALH-3578A-7
G: Jeans and heavy-weight
3,000sti/min
5mm
3.238.1mm (1/8"1-1/2")3.225.4mm (1/8"1")
3,000sti/min
5mm (F type: 4mm)
2.438.1mm (3/32"1-1/2")
By knee: 13mm, By hand: 7mm
3.234.9mm (1/8"1-3/8")
By knee: 13mm, By hand: 7mm
G: Jeans and heavy-weight
3,000sti/min
5mm
3.225.4mm (1/8"1")
By knee: 13mm, By hand: 7mm
Model name LH-3568ALH-3568A-7 LH-3588A (large hooks)LH-3588A-7 (large hooks)
Application
Max. sewing speed
Max. stitch length
Needle gauge
Presser foot
Needle
S: Medium-weight, G: Jeans and heavy-weight
3,000sti/min
5mm
3.225.4mm (1/8"1")
By knee: 13mm, By hand: 7mm
A: DP×5 (#9) #9#16F: DP×5 (#10) #9#16
S: DP×5 (#14) #9#16G: DP×5 (#21) #16#23
G: DP×5 (#21) #16#23
S: DP×5 (#14) #9#16G: DP×5 (#21) #16#23
G: DP×5 (#21) #16#23
LH-3528A-7LH-3528ALH-3578A-7 (with large hooks)LH-3578A (with large hooks)
Semi-dry head, 2-needle, Lockstitch Machine
This is the cutting-edge model 2-needle sewingmachine which comes with substantially enhancedmechanisms such as the direct-drive mechanism,semi-dry head, new thread tension controlmechanism and improved oiling system. All modelsof the LH-3500A Series are provided with asemi-dry head to eliminate staining with oil from theframe (the needle bar part).*A thread tension control mechanism has beendeveloped for each type of sewing machine inorder to achieve the best-suited thread tension forits purpose.
*Two selectable new-method oiling mechanisms.
LH-3568A-7LH-3568ALH-3588A-7 (with large hooks)LH-3588A (with large hooks)
Semi-dry head, 2-needle, Lockstitch Machine with Organized Split Needle Bar
The sewing machine with organized split needlebars is the only sewing machine in the industry thatcomes with the semi-dry head. It helps reducepoor-quality products due to oil stains even in thecase of product items which have corner stitching
sections.*The semi-dry head sewing machine with organizedsplit needle bars is only available from JUKI.
*A thread tension control mechanism has beendeveloped for each type of sewing machine inorder to achieve the best-suited thread tension forits purpose.
*Two selectable new-method oiling mechanisms.
LH-3528A-7
LH-3568A-7
8/20/2019 General Catalog Juki
10/4007
2-needle, Lockstitch Machine
Application
Max. sewing speed
Max. stitch length
Needle gauge
Presser foot
Needle
Model name LH-4128
Light- to medium-weight
F: Foundation, S: Medium-weight, G: Jeans and heavy-weight
4,000sti/min (F type: 3,000sti/min)
5mm (F type: 4mm)
3.238.1mm (1/8"1-1/2")
By knee: 12mm, By knee with wiper: 9mm
F: DP×5 (#10) #9#11
S: DP×5 (#14) #9#16
G: DP×5 (#21) #16#22
LH-4128
Semi-dry head, Direct-drive, High-speed, 2-needle, Needle-feed, Lockstitch Machine
The machine achieves the world's highest sewingspeed of 4,000sti/min as a semi-dry head machine,contributing to increased productivity.Simple adjustments of the machine andreplacement of gauges have been enabled,saving time and effort in maintenance.
In addition, it is possible to change over the feedbetween the needle feed and bottom feed.
LH-4128
8/20/2019 General Catalog Juki
11/4008
Overlock / Safety Stitch Machine
MO-6714DA
MO-6714S
MO-6714S/LB6
MO-6714S/LB-6
2-needle overlock
7,000sti/min
0.84mm
2.0mm
4.0mm
DC×27
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Needle
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Bottom differentialfeed ratio
Needle
Model name MO-6704DA MO-6714DA
7,000sti/min
0.84mm
1-needle overlock 2-needle overlock
— 2.0, 3.2mm
1.6, 3.2, 4.0, 4.8mm 2.0, 3.2, 4.0, 4.8mm
Gathering 1:2 (max. 1:4),Stretching 1:0.7 (max. 1:0.6)
DC×27 (excluding some subclass model)
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Bottom differentialfeed ratio
Needle
Safety stitching
7,000sti/min
1.54mm
3.2, 4.8, 4.8+2.0, 3.2+2.0mm
3.2, 4.0, 4.8, 6.4mm
Gathering 1:2 (max. 1:4),Stretching 1:0.7 (max. 1:0.6)
DC×27 (excluding some subclass model)
Model name MO-6716DA
Model name MO-6704S MO-6714S MO-6716S
1-needle overlock 2-needle overlock Safety stitching
7,000sti/min
0.84mm 1.54mm
— 2.0, 2.4, 3.2mm 2.0, 3.2, 4.0, 4.8, 4.8+2.0mm
1.6, 3.2, 4.0, 4.8mm 3.2, 4.0, 4.8mm 3.2, 4.0, 4.8, 6.4mm
Gathering 1:2 (max. 1:4), Stretching 1:0.7 (max. 1:0.6)
DC×27 (excluding some subclass model)
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Differential feed ratio
Needle
Model name
MO-6714S/LB6(with semi-automatic backlatch device)
High-speed, Overlock / Safety Stitch Machine
The overlock machine is provided with a backlatching capability that eliminatesthe need for bartacking. The chain-off thread is tucked into the seam at thebeginning of sewing to secure chain-off thread and prevent the finished seamfrom coming undone.
MO-6700DA Series
Semi-dry head, High-speed, Overlock / Safety Stitch Machine
Maxmun sewing speed is increased to 7,000sti/min. The needle bar mechanismand upper looper mechanism have been redesigned to require no lubrication. Thefrequency of stain removal or re-sewing is reduced. The most-advanced drytechnologies, such as the special surface treatment applied to the major drive unitand the grease feeding method, contribute to higher durability. The machine does notsplash oil after a long-period of use.
MO-6700S Series
High-speed, Overlock / Safety Stitch Machine
Since the machine comes with a needle-thread take-up mechanism as well asa looper thread take-up mechanism, to offer upgraded responsiveness fromlight- to heavy-weight materials with a lower applied tension.
8/20/2019 General Catalog Juki
12/4009
Overlock / Safety Stitch Machine
MO-6914S
Model name MO-6904S MO-6914S MO-6916S MO-6904R MO-6914R MO-6916R
0.84mm
Safety stitching
1.54mm
2.0, 3.2, 4.0, 4.8, 4.8+2.0mm
3.2, 4.0, 4.8, 6.4mm
0.84mm
Safety stitching
1.54mm
3.2, 4.8, 4.8+2.0mm
3.2, 4.0, 4.8, 6.4mm
2-needle overlock
7,000sti/min, 6,000sti/min
2.0mm
3.2, 4.0mm
1-needle overlock
3.2, 4.0, 4.8, 6.4mm
8,000sti/min
2-needle overlock
2.0, 2.4, 3.2mm
3.2, 4.0, 4.8mm
1-needle overlock
8,500sti/min
1.6, 3.2, 4.0, 4.8mm
Gathering 1:2 (max. 1:4), Stretching 1:0.7 (max. 1:0.6)
DC×27 (excluding some subclass model)
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Differential feed ratio
Needle
Model name MO-6804S MO-6814S MO-6816S
0.63.8 (4.5) mm
Safety stitching
3.0, 5.0mm
4.0, 5.0, 6.0mm
7,000sti/min
2-needle overlock
2.0mm
3.0, 4.0mm
1-needle overlock
—
1.5, 4.0mm
For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)
DC×27 (excluding some subclass model)
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Differential feed ratio
Needle
Model name MO-6704S-DD
1-needle overlock
—
1.6, 3.2, 4.0, 4.8mm
MO-6716S-DD
Safety stitching
1.54mm
2.0, 3.2, 4.0, 4.8, 4.8+2.0mm
3.2, 4.0, 4.8, 6.4mm
MO-6714S-DD
2-needle overlock
2.0, 2.4, 3.2mm
3.2, 4.0, 4.8mm
7,000sti/min
MO-6716DA-DD
Semi-dry-head safety stitching
1.54mm
3.2, 4.8, 4.8+2.0, 3.2+2.0mm
3.2, 4.0, 4.8, 6.4mm
0.84mm
MO-6714DA-DD
Semi-dry-head 2-needle overlock
0.84mm
2.0, 3.2mm
2.0, 3.2, 4.0, 4.8mm
For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)
DC×27 (excluding some subclass model)
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Bottom differential feed ratio
Needle
MO-6900S SeriesMO-6900R Series (variable top-feed)
Super-high-speed, Overlock / Safety Stitch Machine
Since the machine comes with a needle-thread take-up mechanism as well as alooper thread take-up mechanism, to offer upgraded responsiveness from light- toheavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at themaximum sewing speed of 8,000 to 8,500sti/min.
MO-6816S
MO-6800S Series
High-speed, Overlock / Safety Stitch Machine
The MO-6800S Series responds to various kinds of sewing materials andprocesses, producing delicate and beautiful soft-to-the-touch seams while furtherreducing operating noise as well as increasing durability. This advanced overlock /safety stitch machine is easier to use and promises superior cost-effectiveness.
MO-6714S-DD
MO-6700DA-DD, MO-6700S-DD /X81056 (with a sensor-type auto lifter, sensor-type chain-off thread cutter/suction unit ) /X81057 (with a sensor-type auto lifter/sensor-type side cutter/suction unit) /X81059 (with a direct-drive motor)
Direct-drive, Overlock / Safety Stitch Machine
The sewing machine is capable of sewing under three different sewing modes;
automatic mode, semi-automatic mode and manual mode.The desired sewing mode can be selected by use of the operation panel.Under the automatic mode: The sewing machine performs sewing automaticallywithout requiring the operator to operate the pedal. The operator is only required toplace hands on the material being sewn in order to help feed the material in thecorrect direction.Under the semi-automatic mode: The sewing machine automatically lifts thepresser foot and operates the thread trimmer. The operator is required to controlthe sewing speed with the pedal.Under the manual mode: The operator operates the sewing machine by operatingthe pedal in the similar way as with the general-purpose sewing machines.
8/20/2019 General Catalog Juki
13/4010
Overlock / Safety Stitch Machine
MO-6914C
MO-6916J
DO×5 (excluding some subclass model)
Gathering 1:1.75 (max. 1:3.8)Streching 1:0.7 (max. 1:0.6)
Gathering 1:2 (max. 1:3.8)Streching 1:0.8 (max. 1:0.6)
Gathering 1:1.75 (max. 1:3.8)Streching 1:0.7 (max. 1:0.6)
Gathering 1:1.75 (max. 1:3.8)Stretching 1:0.7 (max. 1:0.6)
Gathering 1:2 (max. 1:3.8)Stretching 1:0.8 (max. 1:0.6)
Gathering 1:1.75 (max. 1:3.8)Stretching 1:0.7 (max. 1:0.6)
6,000sti/min
Safety stiching
2.55mm
4.8mm
4.8, 6.4mm
2-needle overlock
2.54mm
2.6mm
6.4mm
1-needle overlock
2.55mm
—
4.8, 10.0, 18.0mm
Safety stitching
2.55mm
4.8mm
4.8, 6.4mm
2-needle overlock
2.54mm
2.6mm
6.4mm
1-needle overlock
2.55mm
—
4.8mm
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Differential feed ratio
Needle
MO-6916GMO-6914GMO-6904GMO-6916JMO-6914JMO-6904JModel name
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Bottom differential feed ratio
Needle
Gathering 1:2.3 (max. 1:4.5), Streching 1:0.8
DC×27
8,000sti/min
0.83.5mm
1-needle overlock
3.2, 4.0, 4.8mm
2.0mm
3.2, 4.0mm
2-needle overlock
MO-6914CMO-6904CModel name
The machine incorporates a mechanism and parts that are optimum for the sewingof extra heavy-weight materials, such as an extra high-lift type upper looper, tractorfoot and coarse type feed dog. It demonstrates an excellent performance ability inthe sewing of various kinds of heavy-weight materials such as jeans, raised fabric
materials, mats and carpets.
MO-6900J Series (variable top-feed)MO-6900G Series (bottom-feed)
Overlock / Safety Stitch Machine for Extra Heavy-weight Materials
The machine provided with a small-in-diameter cylinder bed, is capable of
runstitching or blind-hemming tubular materials, such as sleeve cuffs, with ease.
MO-6900C Series
Super-high-speed, Cylinder-bed, Overlock Machine
MO-6914C-BD6-307/X81028
Stitch type
Max. sewing speed
Stitch length
Needle gauge
Overedging width
Bottom differential feed ratio
Needle
7,000sti/min (longitudinal stroke of top feed dog is 6mm or less)6,000sti/min (longitudinal stroke of top feed dog is 6~8.5mm)
2-needle overlock
0.83.5mm
2.0mm
3.2mm
For gathering 1:2.3 , For stretching 1:0.8
DC×27
MO-6914C-BD6-307/X81028Model name
The machine comes with the top feed dog that moves along an ideal locus. Thefeed dog securely catches the material and allows the multi-layer portion of a
material to be fed under it with consistency. In addition it helps finish uniform
seams while preventing the presser foot from jumping and smoothly feeds thematerial without fail.
Compact-shape of the cylinder effectively prevents the material from being fed
unevenly and from twisting in various kinds of sewing of tubular materials eg.,
joining sleeve cuffs of which diameter is small and blind hemming long materials.
MO-6914C-BD6-307/X81028 (variable top-feed type)
High-speed, Cylinder-bed, 2-needle Overlock Machine
8/20/2019 General Catalog Juki
14/40
LZ-2290A-SR-7
Max. sewing speed
Max. zigzag width
Max. stitch length
Number of patterns for
standard stitching
Custom patternmemory capacity
Needle
5,000sti/min, T-shape stitching: 4000sti/min
10mm
5mm
14 types / 20 patterns
Internal memory: Max. 20 patterns,External memory: Max. 999 patterns
438 (Nm70), DP×5 (#10)
Model name LZ-2290A-SR-7
Model nameLZ-2290A-DS-7LZ-2290A-DS
LZ-2290A-DU-7LZ-2290A-DU
LZ-2290A-SS-7LZ-2290A-SS
LZ-2290A-SU-7LZ-2290A-SU
Minute-quantity lubrication typeDry-head type
Standard
5mm
4,000sti/min
Anti-material-slipcapability type
Standard
5,000sti/min
5mm
Anti-material-slipcapability type
4,500sti/min
2.5mm
10mm (in increments of 0.1mm)
2.5mm
8 types / 14 patterns
Internal memory: Max. 20 patterns, External memory: Max. 999 patterns
Max. 10 patterns, 20 step, 500 stitches/step
438 (Nm70), DP×5 (#10)
Machine head type
Type
Max. sewing speed
Max. zigzag width
Max. stitch length(stepless fine adjustment)
Number of patterns forstandard stitching
Custom patternmemory capacity
Continuous stitchngpattern
Needle
LZ-2290A-SR-7 (quick reverse type)LZ-2290A-DU-7 (dry-head, anti-material-slip capability type)LZ-2290A-DU (dry-head, anti-material-slip capability type)LZ-2290A-DS-7 (dry-head type)
LZ-2290A-DS (dry-head type)
LZ-2290A-SU-7 (minute-quantity lubrication, anti-material-slip capability type)LZ-2290A-SU (minute-quantity lubrication, anti-material-slip capability type)LZ-2290A-SS-7 (minute-quantity lubrication type)LZ-2290A-SS (minute-quantity lubrication type)
Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
The machine comes provided as standard with twenty differentzigzag stitching, T-stitch and covering stitch patterns grouped intofourteen different types. The feed mechanism is controlled with astepping motor, enabling continuous sewing at a high speed.A single unit is extremely versatile and can perform straight stitching,standard zigzag stitching, 2-step zigzag stitching, 3-step zigzag
stitching, scallop stitching, and blind stitching. As a result, thesystem is available for a far wider range of applications.
(Dry-head type)With its dry head, the machine does not splash oil, therebypreventing the sewn product from being stained with oil. The dryhead also does not require periodic oiling.
11
Zigzag Stitching Machine
LZ-2290A-SS-7
8/20/2019 General Catalog Juki
15/40
LZ-2280A
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine (standard zigzag / standard wider zigzag)
The standard zigzag stitching machine which createssoftly finished seams. The needle rocking mechanism isprovided with a triangular cam which helps producebeautiful seams with consistency.
LZ-2280A
12
Zigzag Stitching Machine
LZ-2284A-7LZ-2284A
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine(with standard / 3-step zigzag stitching pattern changeover function)
Designed to handle both standard and 3-step zigzag
stitching, the machine offers increased availability.The direct-drive motor system has been adopted by all of
the sewing machines with a thread trimmer. As a result,
the sewing machine starts up swiftly and promises
increased stop accuracy, thereby demonstrating improvedresponsiveness.
Model name
Stitch system
Stitch pattern
LZ-2284A-7, 2284A
Standard / 3-step zigzag
Max. sewing speed
Max. zigzag width
Max. stitch length
Needle
5,000sti/min
5mm (standard) / 10mm (3-step)
2.5mm
134 SUK (Nm70)LZ-2284A-7
Model name
Stitch system
Stitch pattern
LZ-2280AA LZ-2280AB
Standard zigzag Standard wider zigzag
Max. sewing speed
Max. zigzag width
Max. stitch length
Needle
5,000sti/min
134 SUK (Nm70)
5mm
2.5mm
8mm
5mm
LZ-2287A
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
(with 3-step zigzag / scallop stitching pattern changeover function)
Designed to handle both 3-step zigzag and scallop
stitching, the machine offers increased availabili ty.
Model name
Stitch system
Stitch pattern
LZ-2287A
3-step zigzag / scallop
Max. sewing speed
Max. zigzag width
Max. stitch length
Needle
5,000sti/min
10mm
2.5mm
134 SUK (Nm70)LZ-2287A
8/20/2019 General Catalog Juki
16/40
Zigzag Stitching Machine
13
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. stitch length
Needle
Standard zigzag (with lower knife)
5,000sti/min
4.5mm
2.5mm
438 (Nm70), DP×5 (#10)
Model name LZ-2282N-7, 2282N
3-step zigzag
5,000sti/min
10mm
2mm
438 (Nm70),DP×5 (#10)
Fagoting
4,000sti/min
8mm
2.2mm
438 (Nm80)
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. stitch length
Needle
Model name LZ-2285N LZ-2286N
When used in the lace-attachment process for ladies'foundation, the machine sews lace on the garment bodywhile simultaneously cutting only the garment body.
LZ-2282N-7 LZ-2282N
High-speed, 1-needle, Lockstitch, Standard Zigzag Stitching Machine with Lower Knife
The maximum needle throw is 10mm. The needle rockingmechanism means a higher degree of accuracy, therebyleading to a very high performance.
LZ-2285N (fagoting)LZ-2286N (3-step zigzag)
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
LZ-2286N
LZ-2282N-7
The sewing machine provided with an anti-material-slipfunction, which promises more beautifully finished seams, isincluded in three different model lineups. With its newlydeveloped feed mechanism, the machine prevents “unevenfeed of the upper and lower cloths” when sewing girdlesand body suits made of slippery, elastic materials.
LZ-2284NU-7 (with standard / 3-step zigzag stitching pattern changeover function)LZ-2284NU (with standard / 3-step zigzag stitching pattern changeover function)
LZ-2280NU
High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine with Anti-material-slip Type
LZ-2280NU
LZ-2280NULZ-2284NU-7, 2284NU
4,500sti/min
Standard zigzag
10.0mm
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. feeding amount
Needle 438 (Nm70), DP×5 (#10)
Standard / 3-step zigzag
10.0mm (standard)10.0mm (3-step)
2.5mm (standard)2.0mm (3-step)
Model name
8/20/2019 General Catalog Juki
17/40
LZ-2284C-7
High-speed, Cylinder-bed, 1-needle, Lockstitch, Zigzag Stitching Machine(with standard / 3-step zigzag stitching pattern changeover function)
The cylinder bed zigzag stitch machine is best suited to
the circular stitching processes of tubular products such
as girdles, shorts and swimwear.
Model name
Stitch systerm
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. stitch lengthPeripheral dimension
of the cylinder section
Needle
LZ-2284C-7
Standard / 3-step zigzag
5,000sti/minStandard zigzag: zigzag width of 5mm or less3-step zigzag: zigzag width set to 8mm or less
Standard zigzag: 8mm, 3-step zigzag: 10mm
Standard zigzag: 2.5mm, 3-step zigzag: 2mm
322mm
438 (#75), DP×5 (#10)LZ-2284C-7
LZ-271 (for embroidering only)LZ-391N
1-needle, Lockstitch, Zigzag Stitching Machine and Embroidering Sewing Machine
The machine is capable of embroidering nanes and
marks on sewing products, as well as zigzag stitching, by
simply changing the throat plate. When using thismachine for zigzag stitching, the zigzag width and stitch
length can be changed so that many different types ofzigzag stitch can be sewn.
Model name
Max. sewing speed
Needle bar stroke
Zigzag width
Stitch length
Needle
LZ-271 LZ-391N
2,000sti/min (with zigzag width is set to 10mm)1,700sti/min (with zigzag width is set to 12mm)
33.4mm
012mm
— Max. 5mm
DB×1B (#11) #9#18 DB×1B (#14) #9#16 LZ-391N
14
Zigzag Stitching Machine
8/20/2019 General Catalog Juki
18/4015
Post-bed Sewing Machine
DP-2100
Computer-controlled, Dry-head, Lockstitch Sleeve Setting Machine with Multi-programming Device
The machine is the culmination of JUKI's leading edge
technologies to enable a sleeve setting process, which is
the most difficult of all sewing processes, thereby moreeasily achieving upgraded seam quality. The machine
comes with a newly developed belt feed mechanism that
offers excellent responsiveness to materials and ease of
their handling.
Model name
Max. sewing speed
Stitch length(both top and bottom)
Amount of the alternatingvertical movement of thepresser foot and walking foot
Number of programsthat can be input
Number of steps that can beinput (for one program)
Needle
DP-2100
3,500sti/min (feed pitch 1.54.0mm)
1.56mm
Max. 3.5mm
99 programs
30 steps
DP×17 #10#14DP-2100
LT-591
1-needle, Lockstitch, Post-bed type Basting Machine
This model is a specially developed machine to increase
the sewing efficiency of basting process.
Model name
Max. sewing speed
Max. stitch length
Needle
LT-591
600sti/min
Free
TV×7 (#14) LT-591
8/20/2019 General Catalog Juki
19/40
MF-7523-E11
MF-7523D-C11
MF-7523-U11
Max. sewing speed
Needle gauge
Stitch length
Needle
6,500sti/min
3.2, 4.0, 4.8, 5.6, 6.4mm
UY128GAS (#10S) #9S#12S
1.23.6mm
5,000sti/min
5.6, 6.0, 6.4mm
Model name MF-7500/U11 MF-7500D/U11
Max. sewing speed
Needle gauge
Stitch length
Needle
1.23.6mm
UY128GAS (#10S) #9S#12S
Model name MF-7500-C11 MF-7500D-C11
6,500sti/min
3.2, 4.0, 4.8, 5.6, 6.4mm
5,000sti/min
4.0, 5.6, 6.4mm
6,500sti/min
3.2, 4.0, 5.6, 6.4mm
5,000sti/min
4.0, 5.6, 6.4mm
0.93.6mm
UY128GAS (#10S) #9S#12S
Max. sewing speed
Needle gauge
Stitch length
Needle
Model name MF-7500-E11 MF-7500D-E11
High-speed, Flat-bed, Top and Bottom Coverstitch Machine (universal type)
The machine can be used for the hemming process of the sleevesand bottoms of T-shirts and for the covering process for sportswearand knitwear.The front cover is trimmed to allow operators to bring their handscloser near the needle entry area, thereby increasing work efficiencyin the covering process, etc.
MF-7500-C11MF-7500D-C11 (semi-dry head)
High-speed, Flat-bed, Top and Bottom Coverstitch Machine (collarette attaching)
This model is best suited for attaching collarettes on underwear,
briefs and knitwear. Ease of use is further improved by using theelectromagnetic type tape cutter (TC16).
MF-7500-E11MF-7500D-E11 (semi-dry head)
High-speed, Flat-bed, Top and Bottom Coverstitch Machine(elastic lace attaching with right hand fabric trimmer)
The machine is intended for the elastic lace attaching of shorts,lingerie and foundations. The right hand fabric trimmer cuts themulti-layered section of joined seams without fail to achieve uniformlyand beautifully finished seams, with the seams and material-edgealigned.
T-shir ts Knitwear Swimwear
BriefsUnderwear
Ladies' i nner wear Short s
16
Coverstitch Machine
MF-7500-U11MF-7500-U11/UTMF-7500D-U11 (semi-dry head)MF-7500D-U11/UT (semi-dry head)
8/20/2019 General Catalog Juki
20/40
Coverstitch Machine
17
Max. sewing speed
Needle gauge
Stitch length
Needle
6,500sti/min
3.2, 4.0, 4.8, 5.6, 6.4mm
5,000sti/min
4.0, 5.6, 6.4mm
0.93.6mm
UY128GAS (#10S) #9S#12S
Model name MF-7900-U11 MF-7900D-U11
Max. sewing speed
Needle gauge
Stitch length
Needle
5,000sti/min
5.6, 6.4mm
0.93.6mm
UY128GAS (#10S) #9S#12S
Model name MF-7900-H11/PL
Model name MF-7900-H22,23/UT MF-7900D-H22,23
Max. sewing speed
Needle gauge
Stitch length
Needle
6,000sti/min 5,000sti/min
4.0, 4.8, 5.6, 6.4mm 4.8, 5.6, 6.4mm
0.93.6mm
UY128GAS (#10S) #9S#12S
MF-7900-U11MF-7900-U11/UTMF-7900D-U11 (semi-dry head)MF-7900D-U11/UT (semi-dry head)
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (universal type)
MF-7900-H11MF-7900-H11/UT
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (hemming)
The machine can be used for the hemming process of the sleeves
and bottoms of T-shirts and for the covering process for sportswearand knitwear.The front cover is trimmed to allow operators to bring their handscloser near the needle entry area, thereby increasing work efficiencyin the covering process, etc.
The machine is intended for the hemming of knit shirts and T-shirts.This model is best suited to elastic-band welting for swimwear, briefs,etc. It welts the elastic band which has been overlocked on thegarment body.
MF-7900-H22,23MF-7900-H22,23/UTMF-7900D-H22,23 (semi-dry head)MF-7900D-H22,23/UT (semi-dry head)
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine(hemming with left hand fabric trimmer)
This model is best suited to hemming processes for sleeves andthe bottoms of T-shirts, Polo shirts, etc. It comes with a left handfabric trimmer for trimming fabric in parallel, at all times, to theseam with consistency. The upper knife stroke can be adjustedwith ease.
MF-7923-H11
MF-7923D-H23
MF-7923-U11
T-shirts Polo shirts Knitwear Swimwear
U11
H22,23
Polo shirtsT-shirts
BriefsPolo shirtsT-shirts
H11
Swimwear
8/20/2019 General Catalog Juki
21/40
Coverstitch Machine
18
E11
Boxer briefsBriefs
E22, E23
Briefs
MF-7913D-E11
MF-7923-E22
Model name
Model name
Lubrication
Max. sewing speed
Needle gauge
Stitch length
Needle
MF-7900-E11/PL MF-7900D-E11
Automatic (frame: no lubrication)
5,000sti/min
4.0, 5.6, 6.4mm 5.6mm
0.93.6mm
UY128GAS (#10S) #9S#12S
Model name
Max. sewing speed
Needle gauge
Stitch length
Needle
MF-7900D-H24 MF-7900D-H25
3.2, 4.0mm 5.6, 6.4mm
5,000sti/min
0.93.6mm
UY128GAS (#10S) #9#12S
Lubrication
Max. sewing speed
Needle gauge
Stitch length
Needle
MF-7900-E22,23/PL
Automatic (frame: no lubrication)
5,000sti/min
5.6, 6.4mm
0.93.6mm
UY128GAS (#10S) #9S#12S
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine(elastic band attaching with right hand fabric trimmer)
MF-7900-E11MF-7900-E11/UTMF-7900D-E11 (semi-dry head)MF-7900D-E11/UT (semi-dry head)This model is best suited to endless flat elastic band sewing processes for briefs,boxer briefs, etc. The right hand fabric trimmer trims the fabric, even at a multi-layeredjoined part, to produce a beautiful finish with the seam and fabric edge aligned withconsistency. The right hand fabric trimmer mechanism is a unit-structure to permit easyinstallation / removal. This contributes to easier adjustments, such as looper aligning.
The machine is used for spandex elastic band sewing processes for briefs. Themachine produces soft seams, making it best-suited for band attaching processeswhere seams are required to have sufficient elasticity.
High-speed, Cylinder-bed, Top and Bottom Coverstitch Machine (endless spandex elastic band attaching)
MF-7900-E22 (with manual binder)MF-7900-E22/UT (with manual binder)MF-7900-E23 (with air binder)MF-7900-E23/UT (with air binder)
MF-7900D-H24/UTMF-7900D-H25/UT (with sliding presser foot)
Semi-dry head, Cylinder-bed, Top & Bottom Coverstitch Machine
(hemming with left hand fabric trimmer, for extra light-weight materials)
The machine is best-suited for the hemming of stretchy new material such asT-shirts, underwear and sportswear, etc. The machine produces seams with nosemi-cylindrical swells by performing sewing while making the feeding lengths ofthe right and left needle threads equal. The sliding presser foot prevents the
material hem from twisting during sewing and further eliminates oblique-feeding ofthe material in terms of its texture.
MF-7923D-H24
H24,25
Stretchy New Material
8/20/2019 General Catalog Juki
22/4019
Coverstitch Machine
The small cylinder-bed and semi-dry head features have beenachieved while placing priority on ease of use.Outer circumference of the cylinder section is 176mm!! The cylinderhas the industry's smallest diameter.
The outer circumference of the cylinder section has been reduced to176mm. This allows the sewing machine to easily sew conventionallyhard-to-sew small-in-diameter tubular parts such as the sleeve cuffsof sportswear and ladies' cut-and-sewn wear and the necklines ofchildren's wear.
MF-7223D-U10
Model name
Lubrication
Max. sewing speed
Needle gauge
Stitch length
Needle
MF-7200D
Automatic (frame: no lubrication)
4,000sti/min
5.6, 6.4mm
Max. 4.2mm
UY128GAS (#10S) #9S#12S
Semi-dry-head, Small-cylinder-bed, Top and Bottom Coverstitch Machine
MF-7200D-U10 (universal type)
MF-7200D-K10 (covering)
8/20/2019 General Catalog Juki
23/4020
Chainstitch Machine
MS-1190 MS-1190M
Application
Max. sewing speed
Needle gauge
Stitch length
Needle
Light-weight Medium-weight
4,000sti/min
3.2mm (1/8")6.4mm (1/4")
1.23.2mm
TV×64-NY (#12) #8#14B-64 (Nm80) Nm60Nm90
TV×64-NY (#16) #12#19B-64 (Nm100) Nm80Nm120
MS-1261M MS-1261
Application
Max. sewing speed
Needle gauge
Stitch length
NeedleUY128GAS-NY (#21) #16#22
UY128GAS (Nm130) Nm100Nm140UY128GAS-NY (#19) #16#22
UY128GAS (Nm120) Nm100Nm140
Medium- to heavy-weight Extra heavy-weight
3,600sti/min
5.6mm (7/32")9.6mm (3/8")
1.44.2mm
MS-1190 (2-needle, for light- to medium weight)MS-1261(3-needle, for heavy-weight)
Feed-off-the-arm, Double Chainstitch Machine
Thanks to the thread guide located between the needle bar threadtake-up and the intermediate tention release lever, the timing to tense theneedle thread can be decreased.As a result, the machine is capable of beautiful stitches with a softappearance even when heavy-weight material is used.
MS-1261/V045
4,500sti/min
15mm
By knee: 7mm
TV×7 (#11) #9#21
Max. sewing speed
Stitch length
Presser foot
Needle
Model name MH-481-5, 481 MH-484-5, 484 MH-486-5
5,500sti/min
14mmMain feed: 14mm
Differential feed: 15.6mm
By knee: 10mm
TV×7 (#11) #9#18
MH-380, 382Model name
Model name
Model name
Max. sewing speed
Stitch length
Presser foot
Needle
6,000sti/min
14mm
By knee: 10mm
TV×7 (#14) #9#21
High-speed, Flat-bed, 2-needle Double Chainstitch Machine
Accurate stitching performance and durable finishedseams are particularly necessary in the chainstitchingprocess. JUKI ensures high-quality sewing with ahigher degree of consistency with its unique loopermechanism and consistent condensation stitchingmechanism.
MH-481-5
1-needle, Double Chainstitch Machine
The machine comes with a thread spreading mechanism and anadjustable needle guard to prevent stitch skipping. The thread clampmechanism, tension release mechanism and needle thread draw-outmechanism enable the machine to leave thread of a uniform length afterthread trimming, and prevent slip-off of the needle thread. All of thesemechanisms contribute to upgraded sewing.
MH-481-5MH-481MH-484-5 (differential-feed)MH-484 (differential-feed)
MH-486-5 (bottom and variable top-feed)
MH-380 (parallel 2-needle)MH-382 (tandem 2-needle)
MH-382,MH-380
8/20/2019 General Catalog Juki
24/4021
Chainstitch Machine
Needle
Model name MP-200NS
MP-200NL
2,000sti/min (stitch length 6mm or less)
SCHMETZ 29C150 (Nm90) Nm80Nm140
SCHMETZ 29C151 (Nm100) Nm80Nm140
#60#30, B33B46, Nm=120/360/3
Needle
Hook-needle
Recommendedyarn count
Max. sewing speed
Needle
Model name
Needle
Hook-needle
Recommendedyarn count
Max. sewing speed 1,500sti/min (stitch length 68mm)
ORGAN CP×1J (#22U) #18U#22U
ORGAN CP×12J (#23) #19#23
#30#8, B46B92, Nm=60/330/3
Max. sewing speed
Max. stitch length
Presser foot
Needle
1,800sti/min
10mm
By knee: 12mm
TV×7 (#14) #11#14
Model name ML-111U
MP-200N
Pinpoint Saddle Stitching Machine
The machine is able to perform sewing with a reduced tensionapplied to the thread, thereby widening its application range.With its upgraded responsiveness to changes in materials andprocesses, the machine always produces beautiful and softpinpoint stitches.
ML-111U
Single-thread, Chainstitch Basting Machine
Chainstitch is continuously formed with a single thread and by ablind looper which eliminates the need for a bobbin threadrefilling. In addition, the basted seam can be easily undone.
MP-200NL
ML-111U
Application
Max. sewing speed
Stitch length
Needle gauge
Needle
Retainer needle
MF-3620-B (direct-drive type) MF-3620 (belt-drive type)
Light- to heavy weight (knit)
4,200sti/min
1.62.5mm (standard 2.1mm)
5.2, 6.0mm
FL×118GCS (#10S) #9S#12S
FLG-8 (#8) #8#11
Model name
4-needle, Feed-off-the-arm, Flatseamers, Top and Bottom Coverstitch Machine
MF-3620
A new model with a direct-drive servomotor has been introduced
as an addition to the MF Series of JUKI sewing machines. The
new machine consumes only about half the power of the
conventional models. The enhanced responsiveness (comparedwith the model equipped with the clutch motor) of the MF-3620
gives the operator complete control over the material when
sewing curved sections. Safely within its new shield, the frame isequipped with mechanisms for micro-quantity lubrication and
forced oil circulation. The thread take-up mechanism arranged
on the outside of the arm prevents the entry of oil splashes and
dust. The MF-3620 is also configured with JUKI's uniqueoil-thrower mechanism to protect the looper section from oil
infiltration. Excess oil is speedily reclaimed via the new oil
groove. A mounting base for the direct-drive type machine head
is provided as standard with a hand pulley.
MF-3620
8/20/2019 General Catalog Juki
25/4022
Chainstitch Machine
Feed-off-the-arm, 3-needle Double Chainstitch Machine
MS-3580This machine demonstrates increased feed efficiency to
handle extra heavy weight 16-ply denim. Engineered with
extra feeding strength for seaming the inside of jeans. Themachine is best suited for lap seaming jeans, denim
jackets, work uniforms, etc. constructed of heavy weight
materials.
Model name
Application
Max. sewing speed
Stitch length
Needle
Top feed roller width
Feed adjusting method
Installation method
MS-3580S1SN MS-3580S0SN
4,500sti/min
2.13.6mm (standard 3.2mm)
UY130GS (standard) / Nm140 (#22)
11.9mm
Main feed: Slide-type stitch -length adjusting method
Medium- to heavy-weight:
jeans, denim jackets, work uniforms, etc.
To be installed on the table by means ofan auxiliary drive assembly MT03
Differential feed:Lever adjusting method
Without the differentialfeed capability
MS-3580S
8/20/2019 General Catalog Juki
26/40
Button Sewing Machine
23 MB-1377
MB-1800A/BR10
Max. sewing speed
Number of stitches
Feed length (crosswise feed)Feed length (lengthwise feed)
Stitching shape
Button size
Thickness of button
Needle
Applicable button
1,500sti/min
8, 16, and 32 stitches
2.56.5mm
1028mm
1.83.5mm (options max. 5mm)
TQ×1 (#16) #1420
Shank button, Wrapped-around button, Snap, Label, Metal button, Stay button(exclusive attachments have to be used)
Model name MB-1373MB-1377
, , ,
, , , , , , , ,
Model name MB-1800B MB-1800SMB-1800A/BR10
Max. sewing speed
Needle
Button feed mode
Stitching shape
Applicable buttons
Amount of feed
1,800sti/min
Crosswise feed 010mm,Lengthwise feed 06.5mm
Crosswise feed 04.0mm,Lengthwise feed 04.0mm
TQ×7 (#16) #14#20
Size:1028mmSize:1018mm
Type: Round-shaped flat buttons
Automatic feed mode,non-feed mode,and small-lot sewing mode
06.5mm04.5mm
MB-1800A/BR10 (with button feeder)Computer-controlled, Dry-head, High-speed, Single-thread, Chainstitch Button Sewing Machine
The machine is able to independently sew various stitching shapes such asU-shaped stitching, X-shaped stitching and Z-shaped stitching. The machine
has 55 different stitching patterns as standard. In addition to the sewing
shapes, the buttonhole intervals and number of stitches can also be changed
on the operation panel.
MB-1377 (quick stitch shape changing mechanism)
MB-1800B (with wiper unit)
MB-1373Single-thread, Chainstitch, Button Sewing Machine (thread-fray-prevention ON/OFF changeover mechanism)
The machine is provided as standard with a "thread-fray-prevention ON/OFF
changeover mechanism" to help produce beautiful seams with addeddurability. Stitch shape can quickly be changed over between and
button-hole configurations. (only for MB-1377)
50 patterns
LK-1903BB “The world's first”(bird's nest preventing / shorter-thread remaining functions)
Computer-controlled, High-speed, Lockstitch, Button Sewing Machine
Users who are conscious about the finished quality of products manually
nip, with scissors, the thread remaining on the material after thread trimming
at the end of sewing. Now, the button sewing machine with the bird's nestpreventing/shorter thread remaining functions saves such users the trouble
of nipping the thread, thereby preventing the sewing product from being
damaged by manual thread-nipping with scissors.
Use #60-80 (TEX22-30) polyester spun thread
LK-1903B (standard type)The machine achieves sewing speed of 2,700sti/min. The machine's starting,
stopping, thread-trimming and automatic presser lifting speeds have been
increased to significantly shorten total cycle time. With our original horizontal
forced feed mechanism, the button carrier sets a button in position so thatthe operation is simplified. Furthermore, operator fatigue is reduced since
what operator needs to do is only setting material and pressing a pedal.
LK-1903B/BR35 (with button feeder)With our original horizontal forced feed mechanism, the button carrier sets a
button in position so that the operation is simplified. Furthermore, operatorfatigue is reduced since what operator needs to do is only setting material
and pressing a pedal. LK-1903BB
Button size
Model name
Type : Round-shaped, flat buttonSize :8~20mm301 :8~20
34 patterns
DP×17 (#11)
LK-1903BB
Max. 10mm
Type : Round-shaped, flat buttonSize :8~32mm 301 :8~20302 :10~20 OPTION :15~32
DP×17 (#14)
LK-1903B
Max. 13mm
Type : Round-shaped, flat button (2-holed, 4-holed)Size :9~20mm For small button:10~15mmFor medium-sized button:12~18mm (Those that are smallerthan10mm or larger than18mm must be specially ordered.)Thickness: 1.8~3.5mm
LK-1903B/BR35
Max. 11mm
Max. sewing speed
Stitch length
Lift of the work clamp foot
Needle
2,700sti/min
0.1~10mm (0.1mm step)
200 patterns
Number of standard patterns
Number of data that can be input
8/20/2019 General Catalog Juki
27/40
Buttonholing Machine
24LBH-782
LBH-780
1-needle, Lockstitch Buttonholing Machine
Smooth operation contributes to high-quality finished buttonholes and a
higher degree of efficiency.
Model name
Max. sewing speed
Lift of the work clamp
Number of stitches
Buttonhole length
Needle
LBH-780
3,600sti/min
Max. 12mm
54345 (by gear-change method)
6.438.1mm
DP×5 #11J, 134 Nm75
LBH-1790A
LBH-1796A
LBH-1790A
Computer-controlled, High-speed, Buttonholing Machine
The LBH-1790A Series follows the world's highest sewing speed and
dry-head mechanism of its predecessor model. In addition, this machine
comes with the latest model operation panel which is installed with a USBport. Furthermore, all drive mechanisms have been digitalized to manage
each sewing pattern individually. The maximum sewing speed is
4,200sti/min., and the jump speed is 200mm/s. The cycle time has been
further reduced for continuous sewing.
LBH-1795A (120mm presser type)The knife supports sewing lengths of 41mm at the maximum. Since the
LBH-1795AS is provided as standard with the 120mm presser, it iscapable of sewing 120mm long buttonholes. The LBH-1795AS is capable
of sewing long buttonholes such as belt holes in car seats. In addition, it
is applicable to the sewing of buttonholes in men's shirts (continuous
sewing of two buttonholes and the use of two units of sewing machines),etc.
LBH-1796A (220mm presser type)The LBH-1796A is a subclass model of the LBH-1790A Series. This
product is provided with a 220mm work clamp foot. It follows the world'shighest sewing speed, deeply recessed shape of the machine head and
dry-head mechanism of the existing LBH-1790A. In addition, the
LBH-1796A can also be used as a simplified indexer to sew threebuttonholes in a row.
LBH-1790AB “The world's first”(shorter-thread remaining functions)
The newly-developed shorter-thread
remaining mechanism trims the threadshort and eliminates the trouble of
manual thread nipping.
Model name
Max. sewing speed
Needle
Number of patterns that can be input
Number of standard patterns
Lift of the work clamp
Buttonhole length
Bartacking width
Size of cloth cutting knife
LBH-1790A LBH-1795ALBH-1790AB LBH-1796A
Max. 4,200sti/min, Normal 3,600sti/min When the non-lubricated hook (optional) is used: 3,300sti/min
6.431.8mm (1/4"1-1/4") 6.431.8mm (1/4"1-1/4")6.4~22.2mm (1/4"~7/8") 6.425.4mm
Max. 5.0mm(with special-specification part:
Max. 10mm*)
Max. 5.0mm(with special-specification part:
Max. 10mm*)Max. 4.0mm Max. 5.0mm
Max. 41mm(optional: 70mm, 120mm)
Max. 25mm Max. 120mm Max. 220mm
14mm (17mm when the reverse-rotation needle-up function is used) Parallel lifting 6mm
31 patterns
Max. 99 patterns
DP×5 (#11J) #11J~#14J
Remaining length of thread varieswith sewing conditions.
8/20/2019 General Catalog Juki
28/40
Buttonholing Machine
25
MEB-3200
MEB-3810J
MEB-3200
Computer-controlled, Eyelet Buttonholing Machine (for men’s and ledies wear)
The electronically controlled machine permits the selection and setting of
various eyelet shapes. With its new technology called "active tension"(electronic thread tension mechanism), the machine is capable of
duplicating the same sewing conditions with ease.
MEB-3810
Computer-controlled, Eyelet Buttonholing Machine (for jeans and cotton pants)
The machine achieves not only a maximum sewing speed as high as
2,500sti/min, but also reduced vibration and noise. The machine is anewly developed highly-durable simple-design eyelet buttonholing
machine for jeans/cotton pants.
Model name
Application
Stitch system
Sewing speed
Stitch length
Needle throwing width
MEB-3810J MEB-3810C
Jeans Cotton pants and working wear
1-needle, double chainstitch (with gimp)
4002,500sti/min
Taper bar length
Needle
315mm
D0×558 (Nm110) Nm90Nm120
1038mm (needle thread trimming type)1034mm (overall thread trimming type)
Mechanical adjustment of the needle throwing width: 2.04.0Compensation of the needle throwing width (by the lower feed dog): 1.55.0mm
Model name
Thread trimming style
Sewing speed
Sewing length
MEB-3200RSMEB-3200SS
Longer remaining thread
1038mm (with thread trimmer)1050mm (in case looper thread trimming device is removed)✽1
Needle throwing width 23.2mm✽2
Needle DO×558 (Nm100) Nm90Nm110
4002,200sti/min (100sti/min step)
Taper bar length 0mm, 315mm
✽1 When the sewing length of 38~50mm without thread trimmer is selected, the work clamp can be provided by placing special order.✽2 By selecting the left looper and left spreader, the range of stitch bite can be changed to 2.6~4.0mm from 2.0~3.2mm (TS model is excluded)
8/20/2019 General Catalog Juki
29/40
Bartacking Machine
26
LK-1900BB
LK-1902BLK-1901B
Computer-controlled, High-speed, Bartacking Machine
LK-1902B (belt-loop-attaching)The machine is provided as standard with six
different linear bartacking patterns. Since the sewing
size can be easily changed, the optimal number ofstitches and sewing size can be speedily selectedaccording to the belt-loop width. If the normally used
patterns are assigned to the patterns keys, a desired
pattern can be called up or changed with single-key
operation.
LK-1901B (eyelet buttonholes)The machine is provided with a material-drawing
mechanism which draws the right and left parallel
portions of an eyelet buttonhole near to one another.The machine performs bartacking with the right and
left parallel portions of the eyelet buttonhole drawn
near to one another after the buttonhole is clamped
under the work clamp foot, thereby finishing highlydurable and well-tensed eyelet buttonholes.
LK-1900BThe machine achieves sewing speed of 3,200sti/min.
The machine's starting, stopping, thread-trimmingand automatic presser lifting speeds have been
increased to significantly shorten total cycle time.
LK-1900BB “The world's first”(bird's nest preventing / shorter-thread remaining functions)
The sewing machine eliminates so-called "bird's
nests" (thread tangling in on the wrong side of thematerial at the beginning of sewing).
Length of thread remaining on the material at the end
of sewing has been reduced to 2mm or less✽.
Remaining length of thread varies with sewing conditions.
Use #60-80 (TEX22-30) polyester spun thread
Model name
3,200sti/min
DP×5 (#11)
Application
Max. sewing speed
Sewing area
Stitch length
Lift of the work clamp foot
Number of standard patterns
Number of datathat can be input
Needle
Number of stitches thatcan be stored in memory
Model name
LK-1900B-FS
For foundation
30mm (L) × 40mm (W)
0.1~10mm (0.1mm step)
Max. 20,000 stitches
Standard 14mm (17mm when the reverse-rotation needle-up function)
50 patterns
200 patterns
Standard
LK-1901B-SS
30mm (L) × 40mm (W)
0.1~10mm (0.1mm step)
Max. 20,000 stitches
For knits andknitted materials
LK-1900B-MS
Standard
LK-1902B-SS
3,000sti/min
Standard 14mm
(17mm when the reverse-rotation needle-up function)
—
200 patterns
3,200sti/min
Standard 11mm
(by using the reverse-rotation needle-up function 14mm)
50 patterns
200 patterns(for up to 150 patterns, sewing data can be added.)
DP×5 (#14)
LK-1900B-SS
Standard
DP×5 (#14)
Standard
LK-1900B-BS
DP×17 (#14)
For heavy-weightmaterials
LK-1900B-HS
DP×17 (#21)
For foundation
LK-1900B-BF
DP×17 (#11)
LK-1900B-WS
With large hookfor heavy-weight materials
2,700sti/min
DP×17 (#21)
LK-1902B-HS
For heavy-weightmaterials
DP×17 (#21)
Application
Max. sewing speed
Sewing area
Stitch length
Lift of the work clamp foot
Number of standard patterns
Number of datathat can be input
Needle
Number of stitches thatcan be stored in memory
Shorter-threadremaining
Finishing of the Bird's nest preventing/shorter-threadremaining functions (on the wrong side)
8/20/2019 General Catalog Juki
30/4027
Shape-tacking Machine
LK-1930
Model name
Application
Sewing area
Max. sewing speed
Stitch length
Number of datathat can be input
Needle
LK-1910S, 20S, 30S LK-1910H, 20H, 30H
Standard Heavy-weight
60mm (L) × 100mm (W)
2,500sti/min
DP×5 (#14), DP×17 (#18)
LK-1910, 20 : 64 patterns LK-1930 : 691 patterns
LK-1910, 20 : 0.110mm LK-1930 : 0.112.7mm
LK-1910LK-1920 (with intermediate presser)LK-1930 (with intermediate presser and input function)
Computer-controlled, High-speed Shape-tacking Machine
The machine is fully equipped with state-of-the-art features
such as a higher presser foot lift, a double-capacity shuttlehook, and a direct-control machine head that ensures quick
response and an accurate stop position.
8/20/2019 General Catalog Juki
31/40
Computer-controlled Cycle Machine
AMS-210EN-SS1306SA/7450
28
Model name
Application
AMS-210EN-1306/7450
Standard (light- to medium-weight)
Needle DP×17 (#11)
Main-body memory:Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
External media:Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
Max. sewing speed 2,000sti/min
Sewing area X: 130mm × Y: 60mm
Stitch length 0.1~12.7mm (0.05mm step)
Storage of patterndata in the memory
Computer-controlled Cycle Sewing Machine with Input Function (name embroidery type)
AMS-210EN-1306/7450This is the name (alphabetic/Japanese/Chinese characters) embroidering
machine which achieves the embroidering-machine industry's highest sewing
speed of 2,000sti/min.
The sewing machine is a computer-controlled cycle machine provided with aninput function. Once the operator places a piece of material on the sewing
machine, the sewing machine carries out the entire sequence of embroidering
according to the preliminarily input name data from start to the thread trimming
under finish in a fully-automatic manner. With this function, the machine enableseven an inexperienced operator to beautifully and speedily embroider names
with accuracy.
AMS-210EN-1510
AMS-221EN-2516
Computer-controlled Cycle Machine with Input Function
AMS-210EN-1306 (X: 130mm × Y: 60mm)AMS-210EN-1510 (X: 150mm × Y: 100mm)AMS-210EN-2210 (X: 220mm × Y: 100mm)
AMS-221EN-2516 (X: 250mm × Y: 160mm)AMS-221EN-3020 (X: 300mm × Y: 200mm)
The sewing machine achieves the highest sewing speed, 2,800sti/min, in the
industrial sewing machine industry. As a result, cycle time is dramatically
reduced. The feed accuracy is substantially improved due to the adoption ofthe encoder control system. The new AMS Series models substantially
decrease power consumption when compared with the conventional ones. They
have been designed to achieve eco-friendliness.
AMS-221EN-3020 (X: 300mm × Y: 200mm)The sewing machine is applicable to sewing products which require a wider
sewing area than that of the "AMS-221EN-2516."
It is best-suited to the attaching of handles to bags and the shape-tacking of boots
and shoes. The sewing machine is flexibly applicable to sewing requiring amedium sewing area.
AMS-221EN-2516 (X: 250mm × Y: 160mm)
The sewing machine is best-suited to the sewing of large labels and emblems, the
sewing of two or more pieces of small labels and emblems at one time, and the
shape-tacking of bags and shoes. The sewing machine is applicable to a broadrange of materials and processes, while leading the industrial sewing machine
industry in terms of improvement in quality and the promotion of production that
does not require sewing-machine operators to have special skills.
AMS-210EN-2210 (X: 220mm × Y: 100mm)
This model has a sewing area that is best-suited to the sewing of large parts,including the shape-tacking of jean pockets. With this model, you may recognize
the higher productivity of the cycle machine.
AMS-210EN-1510 (X: 150mm × Y: 100mm)The 1510 model is well received in the market due to its moderate-sized sewing
area.Responding to market demand, the 1510 area model with a motor-driven
feeding frame has been newly developed.This model can be used in a plant which
is not provided with pneumatic equipment.
AMS-210EN-1306 (X: 130mm × Y: 60mm)
The sewing machine flexibly supports the sewing of small articles such as labelsand emblems. The sewing machine's small sewing area promises ease of use
when handling small articles, thereby enabling smooth sewing operation.
Model name
Application
Max. sewing speed
Stitch length
Needle
Storage of patterndata in the memory
AMS-210EN-SS AMS-221EN-HL
Light- to medium-weight Medium- to heavy-weight
DP×5 (#14) DP×17 (#18)
AMS-221EN-SL
Light- to medium-weight
DP×5 (#14)
AMS-210EN-HS
Medium- to heavy-weight
DP×17 (#18)
2,800sti/min*
0.1~12.7mm (0.05mm step)
Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
✽Stitch length is 4mm or less for the AMS-210EN and 3.5mm or less for the AMS-221EN.
8/20/2019 General Catalog Juki
32/4029
Computer-controlled Cycle Machine
AMS-224EN-6030
Main-body memory:Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
External media:Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
AMS-224EN-HS
Application
Max. sewing speed
Settable stitch length
Needle
Storage of patterndata in the memory
Model name
2,500sti/min (stitch length 3mm or less)
0.112.7mm (0.05mm step)
Medium- to heavy-weight
DP×17 (#18)
AMS-224EN-GB
Extra heavy-weight
DP×17 (#23)
Computer-controlled Cycle Machine with Input Function
AMS-224EN-4530 (X: 450mm × Y: 300mm)AMS-224EN-6030 (X: 600mm × Y: 300mm)The machine achieves the highest sewing speed of 2,500sti/min among those
with a similar sewing area. With its higher productivity, the machine performsvarious kinds of stitching, making the most out of its wider sewing area in various
sewing applications such as attaching handles to bags and pouches, attaching
belts, sewing many small parts at a time, attaching parts to shoes and sports
shoes (one pair of shoes) and sewing air bags.
Computer-controlled Cycle Machine with Input Function(for 2-color-thread sewing pockets on jeans)with presetting device
AMS-221EN-TS3020/X90002This model is designed for 2-color-thread sewing pockets on jeans and isbased on the AMS-221EN Series. The machine sews folded pocket cloth on the
garment body.
Model name
Max. sewing speed
Stitch length
Sewing area
Storage of patterndata in the memory
AMS-221EN-TS3020/X90002
2,500sti/min
0.112.7mm (0.05mm step)
DP×17 (#21) #18#21
Max. 110mm × 110mmMin. 90mm × 90mm
Needle
Main-body memory:Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
External media:Max. 49,950,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
AMS-221EN-TS3020/X90002
8/20/2019 General Catalog Juki
33/4030
Automatic Machine
AP-876S
AP-876 (full-automatic)Jeans Pocket Setter
The machine automatizes a series of pocket setting processes such as thefolding of a pocket, placement of the pocket on a garment body, sewing,
bartacking and stacking, thereby increasing productivity and achieving
production without requiring the operator to have any special skill. Thispromises consistent finished quality.
AP-874 (semi-automatic)This sewing machine is a semi-automatic type pocket setter. The sewingmachine has been specifically designed for sewing pockets which have
been preliminarily folded in the preceding process on a predetermined
location of the garment body without folding the pocket cloths.
Model name
Application
Machine head
AP-876 AP-874
Full-automatic Semi-automatic
4,000sti/min
250mm × 250mm
0.16mm
IP-420 (large-sized color liquid crystal touch panel)
Max. sewing speed
Sewing area
Stitch length
Opreration panel
High-speed, 1-needle, lockstitch, zigzag stitching machine
(exclusive machine head)
Storage of pattern datain the memory
Max. 999 pattern
APW-896
Flap type
Sewing speed
Kind of welts
Stitch length
Stitch length (fastening stitching)
Corner-knife cutting adjusting method
Needle
Number of independent sewing patterns
Number of cycle sewing patterns
Number of alternate sewing patterns
Model name APW-895 APW-896
Rectangular flap
Max. 3,000sti/min (1,0003,000sti/min)
Standard 2.5mm (2.03.4mm)
Condensation stitching: Standard 1.0mm (0.51.5mm) Back-tack stitching: Standard 2.0mm (0.53.0mm)Changeable between condensation / back-tack stitching
ORGAN DP×17 Standard #16 (#14#18), SCHMETZ 190R Standard #100 (#100#110)
99 patterns (999 patterns when a CF memory card is used)
20 patterns
20 patterns
Rectangular / Slanted flap
Parallel double welt, parallel single welt(with/without flaps)
Parallel double welt, parallel single welt, slanted double welt,slanted single welt, trapezoidal sewing
(with/without flaps)
Mechanical adjustment Electronic adjustment
Model nameWith / Without
(corner knife and center knife)
With
With
With
Without
Without
Without
Sewing length(welt length)
Min. 35mm When a solenoid valve is used: Min. 21mm*For a needle gauge width of 14mm or more, the minimum sewing length is 50mm.
Min. 18mmMax. 220mm (settable in increments of 0.1mm)
Min. 50mmMax. 250mm (settable in increments of 0.1mm)
Min. 18mmMax. 300mm (settable in increments of 0.1mm)
Min. 18mmMax. 220mm (settable in increments of 0.1mm)
Needle gauge 12mm or less: Min. 21mmMax. 220mmNeedle gauge 14mm or more: Min. 50mmMax. 220mm
Needle gauge(mm)
8, 10, 12, 14, 16, 18, 20
22, 24, 26, 28, 30, 32
8, 10, 12, 14, 16, 18, 20
APW-895S
APW-895L
APW-896
APW-895S (for straight pockets with flaps)APW-895L (for straight pockets with flaps, long and wide type)
APW-896 (for slanted pockets with flaps)
Lockstitch, Automatic Welting Machine
The machine supports the sewing of straight pockets (with flaps) on suits,
jackets and pants.Double-/single-welt sewing can be changed over by the simple touch of a key
on the operation panel.*The "direct-drive motor", which transfers the motor power to the machine withno energy loss, not only offers economical benefits due to the power reduction,
but also reduces the machine's vibration and operating noise, thereby helping
reduce operator fatigue.
*The machine head is provided with a semi-dry head to eliminate staining withoil from the frame (the needle bar part).
The support of long and wide welts is enriched, the machine can sew
large-sized pockets such as pockets on coats.
(APW-896)In addition to the APW-895's functions, the APW-896 supports the sewing of
slanted pockets (for sewing slanted flaps).
The world's first computer-controlled sidewise cutting position of the cornerknives enables easy adjustments of the knives simply by operating the panel.
8/20/2019 General Catalog Juki
34/40
Automatic Machine
MOL-254
AB-1351
AMB-289
Model name
Max. sewing speed
Number of stitches
Needle gauge
Bartacking length
Bartacking width
Belt-loop width
Finished length of belt-loop
Needle
MOL-254
2,500sti/min
28, 36, 42 (selectable on the operating panel)
4070mm (1-37/64"2-3/4")
722mm (9/32"55/64")adjustable in increments of 0.1mm
13.2mm (3/64"1/8")adjustable in increments of 0.1mm
920mm (23/64"25/32")
4878mm (1-57/64"3-5/64")
DP×17 (#21) #19#21
Model name
Bartacking size length-wise
Bartacking size cross-wise
Needle
Thread
Belt-loop width
Machine head
Max. sewing speed
Stored bartacking patterns(Stitches)
AB-1351
0~3.2mm (0"~1/8")adjustable in increments of 0.1mm
6~23mm (15/16"~57/64")adjustable in increments of 0.1mm
DP×17 #14, 135×17 #90
Spun 80Nm (recommend), Filament 80Nm (80Nm=#50)
8~20mm (5/16"~25/32")
2,500sti/min
Linear bartacking (12, 15, 21, 28, 36, 41) /Zigzag bartacking (28, 36, 42, 56, 64)
Model name
Max. sewing speed
Button size
Setting data
Number of datathat can be input
Needle
AMB-289
1,800sti/min (neck-wrapping), 1,200sti/min (button sewing)
Sewing button without neck-wrapping:838mmSewing button with neck-wrapping:832mmCounter button:825mm
Distance between buttonholes: 1.56mm (0.1mm step)Height of neck-wrap: 0, 1.510mm
Max. 99 patterns
SM×332EXTLG-NY (#14) #12#18
LK-1961/ABH(Exclusive machine head based on the LK-1900A, Semi-dry-head)
MOL-254
Automatic 2-needle Belt-loop Attaching Machine
The machine time is 1.2 seconds per belt-loop, which ensures increased
productivity. The feed mechanism incorporates a computer-controlled X-Y
method to allow the operator to change the number of stitches and sewing sizes.
AB-1351
Automatic 1-needle Belt-Loop Attaching Machine
AB-1351 is belt-loop attaching machine with the ability to solely sew 12 differentbelt-loop sewing patterns!
This machine not only reduces the time required for the belt-loop attaching
process, but also achieves labor-saving, such as the elimination of the previous
process (belt-loop cutting). Productivity can be dramatically increased when oneoperator attends to two AB-1351 units.
The machine demonstrates the highest productivity among
button-neck-wrapping machines intended for men's and
ladies' outer wear. A single machine unit permits the quick
changeover of types of buttons to be sewn, i.e., flat buttons,shank button, marble buttons and stay buttons with a one-
touch utility lever.
AMB-289
Computer-controlled, High-speed, Single-thread Chainstitch, Button-neck-wrapping Machine
31
8/20/2019 General Catalog Juki
35/40
Automatic Machine
AC-172N-1790
ASN-690L
AE-200ALA
Model name
Machine head
Max. sewing speed
Sewing dimension
Knife size
Feed direction
Number of patterns thatcan be input
Number of buttonholes
Needle
AC-172N-1790
LBH-1790 (exclusive machine head for AC)
4,200sti/min
Standard : Width 4mm × length 25mm(max : width 6mm × length 120mm by repiacing parts)
6.419.1mm (1/4"3/4" inch)
Right (for men's garments) or left (for ladies' garments)
20 patterns
120 pcs.
DP×5 #11J#14J
Machine headApplication
Max. sewing speed
Stitch length
Overedging width
Differential feed ratio
Needle
ASN-690
MO-6904S (super-high-speed, 1-needle overlock machine)Serging of skirts, pants, jeans, etc.
8,000sti/min
0.84mm
4.0, 4.8, 5.6mm
For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6)
DC×27 (#11) #9#14
Machine head
Sewing speed
Max. stitch lengthMax. top-feed amount
Lift of the presser foot
Needle
Sewing condition
AE-200ALA AE-200ALD
DLU-5498N-7 (exclusive machine head for AE-200A)
2003,500sti/min
4mm8mm
10mm
DP×1 (#11) #9#18
(seam allowance) 130mm
(curve sewing) 100mmR or more
(number of plies) Two or one
Model name
Model name
AC-172N-1790
High-speed, Computer-controlled Buttonholing Indexer
LBH-1790, high-speed, computer-controlled lockstitch buttonholing
machine has been combined with a high-performance andhighly accurate indexer.
"Applicability to vertical stripe patterns has been improved."
The newly-developed sub-clamp mechanism prevents slippage
of the material to enable accurate and consistent buttonholing.
"Increased productivity achieved by the preset mechanism"
Automatic Serging Machine
ASN-690Increased productivity is required in the serging process. JUKI
has launched its super-high speed machine developed in pursuit
of simple-in-operation and ease-of-use. To fully support theoperator so that he/she can carry out serging speedily, the
machine comes in two different types; the long-table type and the
short-table type which permits easy handling of the material.
Edge Control Seamer
AE-200ALA (join materials type)AE-200ALD (for sewing pin tucks)
The AE-200A edge control seamer is now launched. The machineis configured with JUKI's unique sensor and manipulator-control
mechanisms allowing inexperienced operators to join materialswith different curves" with great finesses matching the finished
seam quality of highly skilled operators. Sewing specifications can
be quickly and accurately adjusted via touch panel to meet therequirement of various design changes and which helps operators
join materials nimbly and skillfully while enhancing productivity
even in sewing processes for custom-designed articles in small
lots.
32
8/20/2019 General Catalog Juki
36/4033
PM-1
Programming Software for Computer-controlled Sewing Machines
Software
This software is to input and edit sewing data of JUKI's
latest sewing machines. Its versatile input functions allow
to input sewing data of each electronic sewing machinemodel easily, accurately, and quickly. It supports high
quality production with high added value by utilizing and
creating original data for specific designs and applications.
System Formation
Models suited for PM-1
IT-100 Series
IP-310 Series
IP-420 Series
ROM Writer
Digitizer
Scanner
Mouse
CompactFlash
Floppy disk
✽The IP-420 is configured with a USB connector, as standard.
AMS series
LK-1900 series, LK-1900A series, LK-1900AN series, LK-1900B series,
LK-1910, LK-1920, LK-1930 seriesLZ-2290A series, LBH-1790, LBH-1790A, MB-1800, AVP-875
8/20/2019 General Catalog Juki
37/40
MEMO DATE
8/20/2019 General Catalog Juki
38/40
MEMO DATE
8/20/2019 General Catalog Juki
39/40
MEMO DATE
8/20/2019 General Catalog Juki
40/40
SEWING MACHINERY BUSINESS UNIT
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO 206-8551, JAPAN
PHONE : (81) 42-357-2254
FAX : (81) 42-357-2274
http://www.juki.com
Registered Organization :The Scope of the Registration : The activities of research
Head Office