BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-1
INDUCTIVE SENSORS
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-1
Inductive sensors detect the presence of metal objects presence in the sensible area.They aren’t influenced by non-metal materials.
An oscillating electromagnetic field is generated in the sensible area. When a metal object enters the sensitivity field, it tendsto decrease the amplitude of oscillation, creating in this way a switching in the output stage.
In inductive sensors range there are version with linear output in current or in voltage.
In these sensors the presence of metal objects is detected and turned into a signal proportional to the damping of the oscilla-tor, which depends by the distance and metallic composition of the detected object.
WORKING PRINCIPLE
GENERAL INFORMATIONS
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-1
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-2
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-3
HOW TO INTERPRETE THE ORDERING REFERENCES
PUR-5KS907418DCA
IPS = high precision (H < 1μm)AC = amplified a.c. 2 wire cylindrical body inductive seriesACB = amplified a.c. 3 wire cylindrical body inductive seriesACF = amplified a.c. 2 wire slot inductive seriesAX = amplified a.c. + d.c. 2 wire 20 ÷ 240 VAXM = amplified a.c. + d.c. 2 wire 10 ÷ 50 VDC = cylindrical inductive NOT amplified d.c. NAMUR series 2 wiresDCA = cylindrical inductive amplified d.c. 3-4 wiresDCAL = cylindrical inductive analog linear outputDCE = extended sensing distance d.c. seriesDCF = amplified d.c. slot seriesDF = inductive slot sensors NOT amplified d.c. NAMUR seriesDSA = amplified d.c. cylindrical SHORT body inductive seriesDSE = extended sensing distance d.c. SHORT seriesDX = amplified d.c. 2 wire 5 function seriesDCM = amplified d.c. 2 wire non polarized
Diameter of cylindrical sensor or slot width for slot types.For other types, change the number with the following:80B = diameter 80 mmP = rectangular plastic 5 positions head 40 x 40 x 112R = rectangular plastic with adjustable sensing distance 100 x 111 x 30T = rectangular plastic 25 x 40 x 12X = rectangular plastic 25 x 50 x 10Y = rectangular plastic 30 x 50 x 15Z = rectangular plastic 16 x 28 x 10
P = plastic housing
0 = with connector n° 17 - 181 = with connector n° 15 - 162 = 90° output with connector n° 13 = with connector M12 x 14 = with connector n° 16 = standard type cable output7 = cable output with sheath holder8 = with gland9 = with connector M8 x 1A = body length 50 mm completely threadedE = with connector n° 2L = side cable output* = male connector wired on the sensor (see pag. H-1)
0 = NO (normally open output)1 = NC (normally closed output)2 = NO + NC (complementary outputs)C = NC (output normally closed on pin 2 of connector)5 = 5 functions sensor
0 = NAMUR series with 2 wires8 = NPN9 = PNP9 = 20 ÷ 240 V. for a.c. sensorsX = 5 functions sensor
L = smooth bodyM = stainless steel sensing faceJ = degree of protection IP68K = protection against short circuit and overloadS = LED output statusT = high temperature versionV = linear sensor with voltage output
Cable length (if required different than standard 2m)
For Polyurethane cable add PUR
P/
4 = flush mounting 5 = non flush mounting
INDUCTIVE SENSORS
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-3
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-4
KHz
5
5
53
553
5511
Max
switc
hing
frequ
ency
( f )
d
L1L5
L2 L4
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
L1 L2L5
d
L1 L2L5
d
Housing A
Housing B
Housing F
Typical curve
NAMUR SERIES - diameters 4 - 5 - 6,5 - 8 - 12 mm • Non amplified in d.c. 2 wires •
Cable output •
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm mm mm
A
B
AA
ABB
BFBF
•
•
••
••
•
••
••
-
-
-5
--5
--77
20
20
2520
252520
30302323
-
-
--
---
----
-
-
--
---
-20-
20
20
20
2525
252525
30503050
3
3
44
444
4444
4
M5 x 0,5
6,56,5
8M8 x 1M8 x 1
M12 x 1M12 x 1M12 x 1M12 x 1
Cabl
e di
amete
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
DC4/4600L
DC5/4700
DC6,5/4700LDC6,5/5700L
DC8/4700LDC8/4700DC8/5700
DC12/4600DC12/4700DC12/5600DC12/5700
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,15 mm2 on 4 and 5 mm
0,35 mm2 on 6,5 ÷ 12 mm• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing 4 - 5 - 6,5 - 8 mm: stainless steel• Housing 12 mm: nickel plated brass• Sensing face: plastic
Max tightening torque Nm
Nut
M5 x 0,5 M8 x 1 M12 x 1Size SW7 SW13 SW17Thickness mm 2,5 4 5
2 10 15
Diameter
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-5
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
0,8
0,8
1,52,5
1,51,52,5
2244
ORDERING REFERENCES
I brown Rx +blue ---N
omin
al se
nsin
gdi
stanc
e ( S
n )
±10
%
mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-5
KHz
Max
switc
hing
frequ
ency
( f )
21
21
11
0,50,5
L1 L2
L5
d
L1 L2 L4
L5
d
Housing B-1
Housing F-1
• NAMUR SERIES - diameters 14 - 16 - 18 mm• Non amplified in d.c. 2 wires• Cable output
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,35 mm2 on 14 ÷ 16 mm
0,50 mm2 on 18 mm • According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6 • For certified ATEX version see ATEX Catalogue
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm mm mm mm
Cabl
e di
amete
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
ORDERING REFERENCES
I brown Rx +blue ---
B -1B -1
B -1B -1
B -1F -1B -1F -1
••
••
••
••
-10
-10
--
1010
3030
3030
30302020
--
--
----
--
--
-20-
20
3040
3040
30503050
44
44
6666
M14 x 1M14 x 1
M16 x 1M16 x 1
M18 x 1M18 x 1M18 x 1M18 x 1
35
45,5
5588
DC14/4700DC14/5700
DC16/4700DC16/5700
DC18/4600DC18/4700DC18/5600DC18/5700
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Max tightening torque Nm
Nut
M14 x 1 M16 x 1 M18 x 1Size SW17 SW22 SW24Thickness mm 4 4 4
20 25 35
Diameter
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-6
d
L5
L1 L2 L4
d
L5L1 L2
Housing B-9
Housing F-2
NAMUR SERIES - diameters 4 - 5 - 6,5 - 8 -12 mm • Non amplified in d.c. 2 wires •
Cable output •
Technical data: • Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,50 mm2
• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
ORDERING REFERENCES
I brown Rx +blue ---
B - 9B - 9
B - 9F - 2B - 9F - 2
B - 9
B - 9
••
••
••
•
•
-10
--
1515
-
-
3525
35352020
35
35
--
----
-
-
--
-20-
20
-
-
3535
35553555
35
35
66
6666
6
6
M28 x 1,5M28 x 1,5
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
M35 x 1,5
M45 x 1,5
1015
10101515
15
20
0,30,2
0,30,30,20,2
0,3
0,3
DC28/4700DC28/5700
DC30/4600DC30/4700DC30/5600DC30/5700
DC35/4700
DC45/4700
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Diameter
Max tightening torque Nm
Nut
M28 x 1,5 M30 x 1,5 M35 x 1,5 M45 x 1,5Size SW32 SW36 SW41
4 5 5
80 80 70
SW555
70
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-7
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-7
Max
switc
hing
frequ
ency
( f )
KHz
32
21
0,80,6
0,80,4
General Features:With this new series of sensors it’s possible to drive specific inputs for NAMUR sen-sors or inputs for 2 wires amplified switches with low current (up to 10 mA). The out-put is internally triggered and monitored by LED. The load can be applied on bothterminals (function PNP or NPN).
Technical data:• Working voltage: 7,7 ÷ 30 Vdc• Max ripple: 10%• Off-state current (Ir): <1 mA• Minimum operational current (Im): 2 mA• Rated operational current (Ie): 10 mA• Voltage drop (Ud) with load 10 mA: < 6,5 V• Voltage drop (Ud) with load 8 mA: < 5 V• Temperature range: - 25° ÷ +70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 8 and 12 mm
0,75 mm2 on 18 and 30 mm• Protected against short-circuit and overload (8 mm not included)• Protected against any wrong connection• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Use according to NAMUR:• Supply voltage: 7,7 ÷ 9 Vdc• Consumption at 8,2 V with Rx = 1000 Ω with metal: ≤ 1 mA
without metal: ≥ 3 mA
• NAMUR SERIES with LED• Non amplified in d.c. 2 wires• Cable output
L1 L2L5
LED
d
L1 L2L5
LED
d
Housing B
Housing B-4
L1 L2
L5
LED
d
Housing B-5
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal s
ensin
gdi
stanc
e ( S
n )±
10%
mm
ORDERING REFERENCES
BB
B - 4B - 4
B - 5B - 5
B - 9B - 9
••
••
••
••
-5
-7
-10
-15
3025
3023
3020
3520
--
--
--
--
--
--
--
--
3030
3030
3030
3535
44
44
55
55
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
d
L5L1 L2
LED
Housing B-9
DC8/4600SDC8/5600S
DC12/4600KSDC12/5600KS
DC18/4600KSDC18/5600KS
DC30/4600KSDC30/5600KS
DC8/4610SDC8/5610S
DC12/4610KSDC12/5610KS
DC18/4610KSDC18/5610KS
DC30/4610KSDC30/5610KS
NOI +
---
brown
blueRx
NCI +
---
brown
blueRx
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing 8 mm: stainless steel• Housing 12 - 18 - 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-8
ORDERINGREFERENCES
I 1 brown Rx +3 blue ---
d
L1L5
L2 L3 L4
M8 x1 1
4
3
d
L5L1 L2 L4
M8 x 1 1
4
3
d
L1L5
L2 L3 L4
M8 x1 1
4
3
Housing I-4
d
L1L5
L2 L3 L4
M8 x1 1
4
3
Housing I-3
Housing I-8
Housing I-6
NAMUR SERIES • Non amplified in d.c. •
Connector output M8 x 1 •
Fem
ale
conn
ecto
r
n°
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
I - 3
I - 4
I - 8I - 8
I - 6I - 6
•
•
••
••
-
-
-5
-5
22
22
29,524,5
2116
12
12
--
8,58,5
5,5
5,5
5,55,5
5,55,5
39,5
39,5
3535
3535
11-12
11-12
11-1211-12
11-1211-12
4
M5 x 0,5
6,56,5
M8 x 1M8 x 1
0,8
0,8
1,52,5
1,52,5
5
5
43
43
DC4/4900L
DC5/4900
DC6,5/4900LDC6,5/5900L
DC8/4900DC8/5900
Materials:• Housing: stainless steel• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M5 x 0,5 M8 x 1Size SW7 SW13Thickness mm 2,5 4
2 10
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-9
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-9
I 1 brown Rx +3 blue ---
d
L5L1 L2 L3
M12 x 1
L4
3
4
2
1
d
L5L1 L2 L3
M12 x 1
L4
3
4
2
1
d
L5
L1 L2 L3 L4
M12 x 1 3
4
2
1
Housing I
Housing I-9
Housing I-1
• NAMUR SERIES• Non amplified in d.c.• Connector output M12 x 1
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
ORDERINGREFERENCES
Fem
ale
conn
ecto
r
n°
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
II
I - 9I - 9
I - 1I - 1
I - 1I - 1
••
••
••
••
-5
-7
-10
-15
2621
3023
2515
2525
1313
1010
1515
1717
88
88
88
88
4747
4848
4848
5065
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
43
21
0,80,6
0,80,4
DC8/4300DC8/5300
DC12/4300DC12/5300
DC18/4300DC18/5300
DC30/4300DC30/5300
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
Materials:• Housing 8 mm: stainless steel• Housing 12 - 18 - 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-10
NAMUR SERIES with LED • Non amplified in d.c. •
Connector output M12 x 1 •
General Features:With this new series of sensors it’s possible to drive specific inputs for NAMUR sen-sors or inputs for 2 wires amplified switches with low current (up to 10 mA). The loadcan be applied on both terminals (function PNP or NPN).Thanks to LED monitoring and to the internally triggered output, direct use is allowedwith PLC and other electronic inputs optimizing in this way the wiring and the reliabi-lity of the entire system.
Technical data:• Working voltage: 7,7 ÷ 30 Vdc• Max ripple: 10%• Off-state current (Ir): < 1 mA• Minimum operational current (Im): 2 mA• Rated operational current (Ie): 10 mA• Voltage drop (Ud) with load 10 mA: < 6,5 V• Voltage drop (Ud) with load 8 mA: < 5 V• Temperature range: - 25° ÷ +70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload (8 mm not included)• Protected against any wrong connection• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Use according to NAMUR:• Supply voltage: 7,7 ÷ 9 Vdc• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• For certified ATEX version see ATEX Catalogue
d
L5L1 L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
d
L5L1 L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-9
Housing I
Materials:• Housing 8 mm: stainless steel• Housing 12 - 18 - 30 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
d
L5
L1 L2 L3 L4
M12 x 1
4 x LED
3
4
2
1
Housing I-1
ORDERINGREFERENCES
NO
I +
---
1 brown
4 blueRx
NCI +
---
1 brown
2 blueRx
Fem
ale
conn
ecto
r
n°
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
II
I - 9I - 9
I - 1I - 1
I - 1I - 1
••
••
••
••
-5
-7
-10
-15
2621
3023
2515
2525
1313
1010
1616
1717
88
88
88
88
4747
4848
4949
5065
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
32
21
0,80,6
0,80,4
DC8/4300SDC8/5300S
DC12/4300KSDC12/5300KS
DC18/4300KSDC18/5300KS
DC30/4300KSDC30/5300KS
DC8/4310SDC8/5310S
DC12/4310KSDC12/5310KS
DC18/4310KSDC18/5310KS
DC30/4310KSDC30/5310KS
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-11
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thicknessmm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-11
L1 L2L5
d
L1 L2L5
d
Housing B
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
• NAMUR SERIES - for high temperatures (-25° ÷ +110°C)• Non amplified in d.c. 2 wires• Cable output
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ +110°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,35 mm2 on 6,5 ÷12 mm
0,50 mm2 on 18 ÷ 45 mm• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
ORDERING REFERENCES
I brown Rx +blue ---
A
B
B
B - 1
B - 1
B - 1
•
•
•
•
•
•
-
-
-
-
-
-
25
25
30
30
35
35
-
-
-
-
-
-
-
-
-
-
-
-
25
25
30
30
35
35
4
4
4
5
6
6
6,5
M8 x 1
M12 x 1
M18 x 1
M30 x 1,5
M45 x 1,5
1,5
1,5
2
5
10
20
5
5
5
1
0,3
0,3
DC6,5/4600LT
DC8/4600T
DC12/4600T
DC18/4600T
DC30/4600T
DC45/4600T
Housing A
L1 L2
L5
d
Housing B-1
Materials:• Cable: 2 m thermoplastic 140°C; 300 V; O.R. • Housing 6,5 - 8 mm: stainless steel• Housing 12 ÷ 45 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
M45 x 1,5SW55
5
70
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-12
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
5555
5555
200200200200
200200200200
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA4/4608LS)
Diameters 4 - 5 mm • Amplified in d.c. 3 wires •
Cable output •
d
L5L1 L2
LED
L1 L2 L3L5
LEDd
Housing A-3
Housing B-6
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,15 mm2
• Protected against short-circuit and overload (versions with letter K)• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
A - 3A - 3A - 3A - 3
B - 6B - 6B - 6B - 6
••
••
••
••
-3-3
-3-3
25223027
20172522
----
5555
25253030
25253030
3333
3333
4444
M5 x 0,5M5 x 0,5M5 x 0,5M5 x 0,5
0,81,41
1,4
0,81,41
1,4
DCA4/4609LSDCA4/5609LSDCA4/4B09LKSDCA4/5B09LKS
DCA5/4609SDCA5/5609SDCA5/4B09KSDCA5/5B09KS
DCA4/4619LSDCA4/5619LSDCA4/4B19LKSDCA4/5B19LKS
DCA5/4619SDCA5/5619SDCA5/4B19KSDCA5/5B19KS
M5 x 0,5SW72,5
2
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: stainless steel• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-13
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-13
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA6,5/4608LKS)
• Diameters 6,5 - 8 mm• Amplified in d.c. 3 and 4 wires• Cable output
d
L5L1 L2
LED
L1 L2 L3L5
LEDd
Housing A-3
Housing B-6
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,15 mm2 on 4 wires versions
0,22 mm2 on 3 wires versions• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
No-l
oad
supp
lycu
rrent
(l e)
mA
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
A - 3A - 3
A - 3B - 6A - 3B - 6
••
••
••
-5
--55
4540
45404035
--
-5-5
4545
45454545
3,53,5
3,53,53,53,5
6,56,5
8M8 x 1
8M8 x 1
1,52,5
1,51,52,52,5
43
4433
DCA6,5/4609LKSDCA6,5/5609LKS
DCA8/4609LKSDCA8/4609KSDCA8/5609LKSDCA8/5609KS
DCA6,5/4619LKSDCA6,5/5619LKS
DCA8/4619LKSDCA8/4619KSDCA8/5619LKSDCA8/5619KS
DCA6,5/4629LKSDCA6,5/5629LKS
DCA8/4629LKSDCA8/4629KSDCA8/5629LKSDCA8/5629KS
200200
200200200200
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: stainless steel• Sensing face: plastic
M8 x 1SW13
4
10
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-14
Diameters 12 mm • Amplified in d.c. 3 and 4 wires •
Cable output •
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA12/4608KS)
NO
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
L1 L2 L3L5
LEDd
L1 L2 L3 L4
L5
LEDd
Housing B-3
Housing D
Technical data:• Supply voltage (UB): 5 ÷ 40 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 3 wires
0,25 mm2 on 4 wires• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
PNP (positive switching)
ORDERINGREFERENCES
B - 3D
B - 3D
••
••
--77
43503643
710710
50805080
-20-
20
4444
M12 x 1M12 x 1M12 x 1M12 x 1
2244
22
1,51,5
DCA12/4609KSDCA12/4709KSDCA12/5609KSDCA12/5709KS
DCA12/4619KSDCA12/4719KSDCA12/5619KSDCA12/5719KS
DCA12/4629KSDCA12/4729KSDCA12/5629KSDCA12/5729KS
200200200200
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: nickel plated brass• Sensing face: plastic
Max tightening torque Nm
Nut
M12 x 1 M14 x 1 M16 x 1Size SW17 SW17 SW22Thickness mm 4 4 4
15 20 25
Diameter
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-15
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-15
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA18/4A08KS)
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
NO + NC
I blackbrown
whiteblue
+
---
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
• Diameters 18 mm• Amplified in d.c. 3 and 4 wires• Cable output
d
L1
L5
L2 L3 L4
LED
L1 L2
L5
LED
d
d
L1
L5
L2 L3
LED
Housing B-2
Housing C
Housing D-1
Technical data:• Supply voltage (UB): 5 ÷ 60 V• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
No-l
oad
supp
lycu
rrent
( Ie )
mA
PNP (positive switching)
ORDERINGREFERENCES
B - 2B - 2C
D - 1C
D - 1
••
••
••
-10--
1010
504058604850
--
12121212
505070927092
---
20-
20
555656
M18 x 1M18 x 1M18 x 1M18 x 1M18 x 1M18 x 1
585588
111111
DCA18/4A09KSDCA18/5A09KSDCA18/4609KSDCA18/4709KSDCA18/5609KSDCA18/5709KS
DCA18/4A19KSDCA18/5A19KSDCA18/4619KSDCA18/4719KSDCA18/5619KSDCA18/5719KS
DCA18/4A29KSDCA18/5A29KSDCA18/4629KSDCA18/4729KSDCA18/5629KSDCA18/5729KS
400400400400400400
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: nickel plated brass• Sensing face: plastic
M18 x 1SW24
4
35
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-16
L1 L2 L3
L5
LED
d
d
L1L5
L2 L3 L4
LED
Housing D-2
Housing G
d
L5L2 L3
LED
Housing G-1
Diameters 30 - 45 mm • Amplified in d.c. 3 and 4 wires •
Cable output •
Technical data:• Supply voltage (UB): 7 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
No-l
oad
supp
lycu
rrent
( Ie )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA30/4608KS)
PNP (positive switching)
ORDERINGREFERENCES
GD - 2G
D - 2
G -1
••
••
•
--
1515
-
50653550
50
10101010
10
60956095
60
-20-
20
6666
6
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
M45 x 1,5
10101515
20
0,80,80,40,4
0,15
DCA30/4609KSDCA30/4709KSDCA30/5609KSDCA30/5709KS
DCA45/4609KS
DCA30/4619KSDCA30/4719KSDCA30/5619KSDCA30/5719KS
DCA45/4619KS
DCA30/4629KSDCA30/4729KSDCA30/5629KSDCA30/5729KS
DCA45/4629KS
400400400400
400
NO + NC
I blackbrown
whiteblue
+
---
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: nickel plated brass• Sensing face: plastic
Max tightening torque Nm
Nut
M30 x 1,5 M45 x 1,5Size SW36 SW55Thickness mm 5 5
80 70
Diameter
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-17
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-17
• Diameters 4 - 5 - 6,5 - 8 mm• Amplified in c.c.• Connector output M8 x 1
d
L1L5
L2 L3 L4
M8 x14 x LED
1
4
3
d
L1L5
L2 L3 L4
M8 x14 x LED
1
4
3
d
L1L5L2 L4
4 x LED
M8 x 1 1
4
3
Housing I-3
Housing I-4
Housing I-5
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA4/4908LKS)
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
I - 3I - 3
I - 4I - 4
I - 5I - 5
I - 10I - 10
••
••
••
••
-3
-3
-5
-5
2219
2219
48,543,5
4035
1212
1212
--
8,58,5
5,55,5
5,55,5
5,55,5
5,55,5
39,539,5
39,539,5
5454
5454
11-1211-12
11-1211-12
11-1211-12
11-1211-12
44
M5 x 0,5M5 x 0,5
6,56,5
M8 x 1M8 x 1
11,4
11,4
1,52,5
1,52,5
55
55
43
43
200200
200200
200200
200200
DCA4/4909LKSDCA4/5909LKS
DCA5/4909KSDCA5/5909KS
DCA6,5/4909LKSDCA6,5/5909LKS
DCA8/4909KSDCA8/5909KS
DCA4/4919LKSDCA4/5919LKS
DCA5/4919KSDCA5/5919KS
DCA6,5/4919LKSDCA6,5/5919LKS
DCA8/4919KSDCA8/5919KS
d
L1L5
L2 L4
4 x LED
M8 x 1
L3
1
4
3
Housing I-10
Diameter
Max tightening torque Nm
Nut
M5x 0,5 M8 x 1Size SW7 SW13Thickness mm 2,5 4
2 10
Materials:• Housing: stainless steel• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
A018 9-02-2007 9:00 Pagina A-18
NC
I1 brown2 white3 blue ---
+
NO
I1 brown4 black3 blue ---
+
NO + NC
I 4 black1 brown
2 white3 blue
+
---
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-11
Housing I-7
Diameters 8 - 12 mm • Amplified in d.c. •
Connector output M12 x 1 •
Hous
ing
Flush
mou
ntin
gN
on fl
ush
mou
ntin
g
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA8/4308KS)
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
I -11I -11
I - 7I - 7
• •
••
-5
-7
4035
4336
1212
1515
88
88
6060
6666
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
M8 x 1M8 x 1
M12 x 1M12 x 1
1,52,5
24
43
21,5
200200
200200
DCA8/4309KSDCA8/5309KS
DCA12/4309KSDCA12/5309KS
DCA8/43C9KSDCA8/53C9KS
DCA12/43C9KSDCA12/53C9KS
NO + NC
I 4 black1 brown
2 white3 blue
+
---
DCA8/4329KSDCA8/5329KS
DCA12/4329KSDCA12/5329KS
Technical data:• Supply voltage (UB): diameter 8 mm 7 ÷ 30 Vdc
diameter 12 mm 5 ÷ 40 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Materials:• Housing diametro 8 mm: stainless steel• Housing diametro 12 mm nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1Size SW13 SW17Thickness mm 4 4
10 15
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-19
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-19
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NO
I1 brown4 black3 blue ---
+
Technical data:• Supply voltage (UB): diameter 18 mm 5 ÷ 60 Vdc
diameters 30 and 45 mm 7 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
• Diameters 18 - 30 - 45 mm• Amplified in d.c.• Connector output M12 x 1
d
L1
L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-12
NC
I1 brown2 white3 blue ---
+
NO
I1 brown4 black3 blue ---
+
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA18/4308KS)
PNP (positive switching)
ORDERINGREFERENCES
NC
I1 brown2 white3 blue ---
+
I - 12I - 12
I - 2I - 2
I -15
••
••
•
-10
-15
-
5050
6550
50
1919
1717
19
88
88
8
7787
9090
77
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -10
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
M45 x 1,5
58
1015
20
11
0,80,4
0,15
400400
400400
400
DCA18/4309KSDCA18/5309KS
DCA30/4309KSDCA30/5309KS
DCA45/4309KS
DCA18/43C9KSDCA18/53C9KS
DCA30/43C9KSDCA30/53C9KS
DCA45/43C9KS
NO + NC
I 4 black1 brown
2 white3 blue
+
---
DCA18/4329KSDCA18/5329KS
DCA30/4329KSDCA30/5329KS
DCA45/4329KS
d
L5L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-15
Materials:• Housing: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5 M45 x 1,5Size SW24 SW36 SW55Thickness mm 4 5 5
35 80 70
Diameter
d
L1L5
L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-2
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-20
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA18/4208KS)
PNP (positive switching)
ORDERINGREFERENCES
NO321 -
+I
NC
-
+321
I
NO321 -
+I
NC
-
+321
I
M - 1M - 4M - 1M - 4
••
••
--
1010
60605050
-40-
40
33133313
9611396113
1111
M18 x 1M18 x 1M18 x 1M18 x 1
5588
1111
400400400400
DCA18/4209KSDCA18/4409KSDCA18/5209KSDCA18/5409KS
DCA18/4219KSDCA18/4419KSDCA18/5219KSDCA18/5419KS
mm mm mm mm mm n° mm mmKHz mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA18/4E08KS)
PNP (positive switching)NO143 -
+I
NC123 -
+I
MM
••
-10
6050
5050
--
110110
22
M18 x 1M18 x 1
58
11
400400
DCA18/4E09KSDCA18/5E09KS
DCA18/4E19KSDCA18/5E19KS
NO + NC
41
23
+
-
I
NO143 -
+I
NC123 -
+I
NO + NC
41
23
+
-
I
DCA18/4E29KSDCA18/5E29KS
d
L1L5
L2 L3
30
L4
LED
d
L1L5
L2 L3
30
LED
d
L1L5
L2 L4
43
LED
1230
Diameter 18 mm • Amplified in d.c. •
Connector output C1 - C2 •
Housing M-1
Housing M-4
Housing M
Technical data:• Supply voltage (UB): 5 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Materials:• Housing: nickel plated brass• Sensing face and socket connerctor: plastic
M18 x 1SW24
4
35
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-21
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-21
d
L1L5
L2 L3
LED
L4
30
Housing M-5
d
L1L5
L2 L3 LEDL4
46
12
30Housing M-2
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
No-l
oad
supp
lycu
rrent
( Ie )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA30/4208KS)
PNP (positive switching)
ORDERINGREFERENCES
NO321 -
+I
NC
-
+321
I
NO321 -
+I
NC
-
+321
I
M - 2M - 5M - 2M - 5
••
••
--
1515
65655050
10281028
40134013
115106115106
1111
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
10101515
0,80,80,40,4
400400400400
DCA30/4209KSDCA30/4409KSDCA30/5209KSDCA30/5409KS
DCA30/4219KSDCA30/4419KSDCA30/5219KSDCA30/5419KS
mm mm mm mm mm n° mm mmKHz mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA30/4E08KS)
PNP (positive switching)NO143 -
+I
NC123 -
+I
M - 6M - 6
••
-15
5641
5151
--
107107
22
M30 x 1,5M30 x 1,5
1015
0,80,4
400400
DCA30/4E09KSDCA30/5E09KS
DCA30/4E19KSDCA30/5E19KS
NO + NC
41
23
+
-
I
DCA30/4E29KSDCA30/5E29KS
d
L1L5
L2 L3
LED
• Diameter 30 mm• Amplified in d.c.• Connector output C1 - C2
Technical data:• Supply voltage (UB): 7 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing M-6
M30 x 1,5SW36
5
80
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Housing: nickel plated brass• Sensing face and socket connerctor: plastic
NO143 -
+I
NC123 -
+I
NO + NC
41
23
+
-
I
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-22
d
L1L5
L2 L3 LEDL4
46
12
30
d
L5L2 L3
LED
Diameter 45 mm • Amplified in d.c. •
Connector output C1 - C2 •
Housing M-2
Housing M-3
Technical data:• Supply voltage (UB): 7 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA45/4208KS)
PNP (positive switching)
ORDERINGREFERENCES
NO321 -
+I
NC
-
+321
I
NO321 -
+I
NC
-
+321
I
M - 2 • - 50 10 42 102 1 M45 x 1,5 200,15 400 DCA45/4209KS DCA45/4219KS
mm mm mm mm mm n° mm mmKHz mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCA45/4E08KS)
PNP (positive switching)NO143 -
+I
NC123 -
+I
M - 3 • - 50 28 - 78 2 M45 x 1,5 200,15 400 DCA45/4E09KS DCA45/4E19KS
NO + NC
41
23
+
-
I
NO143 -
+I
NC123 -
+I
NO + NC
41
23
+
-
I
DCA45/4E29KS
Materials:• Housing: nickel plated brass• Sensing face and socket connerctor: plastic
M45 x 1,5SW55
5
70
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-23
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-23
L1 L2L5
LED
d
L1 L2
L5
LED
d
L1 L2L5
LED
d
L1 L2L5
LEDd
Housing A
Housing B
Housing B-4
Housing B-5
• SHORT SERIES• Amplified in d.c. 3 wires• Cable output
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,22 mm2 on 6,5 and 8 mm
0,35 mm2 on 12 mm0,50 mm2 on 18 and 30 mm
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )±
10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
No-l
oad
supp
lycu
rrent
( Ie )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSA6,5/4608LKS)
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
AA
BB
B - 4B - 4
B - 5B - 5
B - 5B - 5
••
••
••
••
••
-5
-5
-7
-10
-15
3025
3025
3023
3020
3520
--
--
--
--
--
3030
3030
3030
3030
3535
--
--
--
--
--
3,53,5
3,53,5
44
55
66
6,56,5
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
Supp
luvo
ltage
( UB )
V (min - max)
7 ÷ 307 ÷ 30
7 ÷ 307 ÷ 30
7 ÷ 407 ÷ 40
5 ÷ 405 ÷ 40
7 ÷ 407 ÷ 40
1,52,5
1,52,5
24
58
1015
43
43
21,5
0,80,6
0,80,4
DSA6,5/4609LKSDSA6,5/5609LKS
DSA8/4609KSDSA8/5609KS
DSA12/4609KSDSA12/5609KS
DSA18/4609KSDSA18/5609KS
DSA30/4609KSDSA30/5609KS
DSA6,5/4619LKSDSA6,5/5619LKS
DSA8/4619KSDSA8/5619KS
DSA12/4619KSDSA12/5619KS
DSA18/4619KSDSA18/5619KS
DSA30/4619KSDSA30/5619KS
200200
200200
200200
200200
200200
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing 6,5 and 8 mm: stainless steel • Housing 12 ÷ 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-24
d
L5L1 L2 L4
M8 x 1
4 x LED1
4
3
d
L1L5
L2 L3L4
4 x LED
M8 x1 1
4
3
SHORT SERIES - diameters 6,5 - 8 mm • Amplified in d.c. •
Connector output M8 x 1 •
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing I-8
Housing I-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm n° mm
L4
mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA45/4E08KS)
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
I - 8I - 8
I - 6I - 6
••
••
-5
-5
29,524,5
2116
--
8,58,5
3535
3535
5,55,5
5,55,5
11 - 1211 - 12
11 - 1211 - 12
6,56,5
M8 x 1M8 x 1
1,52,5
1,52,5
43
43
DSA6,5/4909LKSDSA6,5/5909LKS
DSA8/4909KSDSA8/5909KS
DSA6,5/4919LKSDSA6,5/5919LKS
DSA8/4919KSDSA8/5919KS
200200
200200
M8 x 1SW13
4
10
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Housing: stainless steel• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-25
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-25
NC
I1 brown2 white3 blue ---
+
• SHORT SERIES - diameters 8 - 12 - 18 - 30 mm• Amplified in d.c.• Connector output M12 x 1
d
L5L1 L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
d
L5L1 L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
d
L5
L1 L2 L3 L4
M12 x 1
4 x LED
3
4
2
1
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSA8/4308KS)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
II
I - 9I - 9
I - 1I - 1
I - 1I - 1
••
••
••
••
-5
-7
-10
-15
2621
3023
2515
2525
1313
1010
1616
1717
88
88
88
88
4747
4848
4949
5065
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
Supp
lyvo
ltage
( UB )
V (min - max)
7 ÷ 307 ÷ 30
7 ÷ 407 ÷ 40
5 ÷ 405 ÷ 40
7 ÷ 407 ÷ 40
1,52,5
24
58
1015
43
21
0,80,6
0,80,4
200200
200200
200200
200200
DSA8/4309KSDSA8/5309KS
DSA12/4309KSDSA12/5309KS
DSA18/4309KSDSA18/5309KS
DSA30/4309KSDSA30/5309KS
DSA8/43C9KSDSA8/53C9KS
DSA12/43C9KSDSA12/53C9KS
DSA18/43C9KSDSA18/53C9KS
DSA30/43C9KSDSA30/53C9KS
Housing I
Housing I-1
Housing I-9
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
PNP (positive switching)
NO
I1 brown4 black3 blue ---
+
Materials:• Housing 8 mm: stainless steel• Housing 12 ÷ 30 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-26
L1 L2 L3L5
LEDd
Housing B-3
L1 L2 L3L5
LEDd
Housing B-6
Extended sensing distance - diameters 8 - 12 mm • Amplified in d.c. 3 wires •
Cable output •
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCE8/4608KS)
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,22 mm2 on 8 mm
0,35 mm2 on 12 mm• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
mm
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
Supp
luvo
ltage
( UB )
V (min - max)
(*) Note: See mounting precautions (pag. 22)
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing 8 mm: stainless steel• Housing 12 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1Size SW13 SW17
4 4
10 15
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-27
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thkns mm
B - 6B - 6B - 6B - 6
B - 3B - 3B - 3B - 3
••
••
••
••
--55
--77
40403535
43433636
5555
7777
45454545
50505050
----
----
3,53,53,53,5
4444
M8 x 1M8 x 1M8 x 1M8 x 1
M12 x 1M12 x 1M12 x 1M12 x 1
7÷307÷307÷307÷30
7÷407÷407÷407÷40
22,53
3,5
3456
800800400400
800800600600
DCAE8/4609KSDCE8/4609KSDCAE8/5609KSDCE8/5609KS
DCAE12/4609KSDCE12/4609KSDCAE12/5609KSDCE12/5609KS
DCAE8/4619KSDCE8/4619KS DCAE8/5619KSDCE8/5619KS
DCAE12/4619KSDCE12/4619KSDCAE12/5619KSDCE12/5619KS
200200200200
200200200200
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-27
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
L1 L2
L5
LED
d
• Extended sensing distance - diameters 18 - 30 mm • Amplified in d.c. 3 wires • Cable output
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCE8/4608KS)
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
Supp
luvo
ltage
( UB )
V (min - max)
Housing B-2
L1 L2 L3
L5
LED
d
Housing G
(*) Note: See mounting precautions (pag. 22)
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24
4
35
SW365
80
Thkns mm
B - 2B - 2B - 2B - 2
GGGG
••
••
••
••
--
1010
--
1515
50504040
50503535
----
10101010
50505050
60606060
----
----
5555
6666
M18 x 1M18 x 1M18 x 1M18 x 1
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
7÷407÷407÷407÷40
7÷407÷407÷407÷40
8101214
15202028
300300200200
100100100100
DCAE18/4A09KSDCE18/4A09KSDCAE18/5A09KSDCE18/5A09KS
DCAE30/4609KSDCE30/4609KSDCAE30/5609KSDCE30/5609KS
DCAE18/4A19KSDCE18/4A19KSDCAE18/5A19KSDCE18/5A19KS
DCAE30/4619KSDCE30/4619KSDCAE30/5619KSDCE30/5619KS
200200200200
200200200200
A028 9-02-2007 9:01 Pagina A-28
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-29
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Extended sensing distance •Amplified in d.c. •
Connector output M8 x 1 •
d
L1L5L2 L4
4 x LED
M8 x 1 1
4
3
d
L1L5
L2 L4
4 x LED
M8 x 1
L3
1
4
3
Housing I-5
Housing I-10
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCAE6,5/4908LKS)
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
(*) Note: See mounting precautions (pag. 22)
Materials:• Housing: stainless steel • Sensing face: plastic
M8 x 1SW13
4
10
Diameter
Max tightening torque Nm
NutSizeThickness mm
I - 5I - 5I - 5I - 5
I - 10I - 10I - 10I - 10
••
••
••
••
--55
--55
48,548,543,543,5
40403535
----
8,58,58,58,5
5,55,55,55,5
5,55,55,55,5
54545454
54545454
11 - 1211 - 1211 - 1211 - 12
11 - 1211 - 1211 - 1211 - 12
6,56,56,56,5
M8 x 1M8 x 1M8 x 1M8 x 1
22,53
3,5
22,53
3,5
800800400400
800800400400
200200200200
200200200200
DCAE6,5/4909LKSDCE6,5/4909LKSDCAE6,5/5909LKSDCE6,5/5909LKS
DCAE8/4909KSDCE8/4909KSDCAE8/5909KSDCE8/5909KS
DCAE6,5/4919LKSDCE6,5/4919LKSDCAE6,5/5919LKSDCE6,5/5919LKS
DCAE8/4919KSDCE8/4919KSDCAE8/5919KSDCE8/5919KS
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-29
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
• Extended sensing distance - diameter 8 - 12 mm• Amplified in d.c.• Connector output M12 x 1
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• Rated operational current (Ie): 200 mA• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-7
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-11
Materials:• Housing 8 mm: stainless steel • Housing 12 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1Size SW13 SW17Thkns mm 4 4
10 15
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCE8/4308KS)
mm mm mm mm mm n° mm mmHz
PNP (positive switching)NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
V (min - max)
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
Max
switc
hing
frequ
ency
( f ) ORDERING
REFERENCES
Supp
luvo
ltage
( UB )
(*) Note: See mounting precautions (pag. 22)
I - 11I - 11I - 11I - 11
I - 7I - 7I - 7I - 7
••
••
••
••
--55
--
77
40403535
43433636
12121212
15151515
8888
8888
60606060
66666666
6 - 8B -106 - 8B -106 - 8B -106 - 8B -10
6 - 8B -106 - 8B -106 - 8B -106 - 8B -10
M8 x 1M8 x 1M8 x 1M8 x 1
M12 x 1M12 x 1M12 x 1M12 x 1
7 ÷ 307 ÷ 307 ÷ 307 ÷ 30
7 ÷ 407 ÷ 407 ÷ 407 ÷ 40
22,53
3,5
3456
800800400400
800800600600
DCAE8/4309KSDCE8/4309KSDCAE8/5309KSDCE8/5309KS
DCAE12/4309KSDCE12/4309KSDCAE12/5309KSDCE12/5309KS
DCAE8/43C9KSDCE8/43C9KSDCAE8/53C9KSDCE8/53C9KS
DCAE12/43C9KSDCE12/43C9KSDCAE12/53C9KSDCE12/53C9KS
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-30
Extended sensing distance - diameters 18 - 30 mm • Amplified in d.c. •
Connector output M12 x 1 •
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• Rated operational current (Ie): 200 mA• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
d
L1
L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-12
d
L1L5
L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-2
Materials:• Housing: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24Thkns mm 4
35
SW365
80
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCE8/4308KS)
mm mm mm mm mm n° mm mmHz
PNP (positive switching)NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
V (min - max)
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
Max
switc
hing
frequ
ency
( f ) ORDERING
REFERENCES
Supp
luvo
ltage
( UB )
(*) Note: See mounting precautions (pag. 22)
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-31
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
I - 12I - 12I - 12I - 12
I - 2I - 2I - 2I - 2
••
••
••
••
--
1010
--
1515
50505050
65655050
19191919
17171717
8888
8888
77778787
90909090
6 - 8B -106 - 8B -106 - 8B -106 - 8B -10
6 - 8B -106 - 8B -106 - 8B -106 - 8B -10
M18 x 1M18 x 1M18 x 1M18 x 1
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
7 ÷ 407 ÷ 407 ÷ 407 ÷ 40
7 ÷ 407 ÷ 407 ÷ 407 ÷ 40
10101414
20202828
300300200200
100100100100
DCAE18/4309KSDCE18/4309KSDCAE18/5309KSDCE18/5309KS
DCAE30/4309KSDCE30/4309KSDCAE30/5309KSDCE30/5309KS
DCAE18/43C9KSDCE18/43C9KSDCAE18/53C9KSDCE18/53C9KS
DCAE30/43C9KSDCE30/43C9KSDCAE30/53C9KSDCE30/53C9KS
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-31
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
• SHORT SERIES - Extended sensing distance• Amplified in d.c. 3 wires• Cable output
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSE6,5/4608LKS)
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,22 mm2 on 6,5 and 8 mm
0,35 mm2 on 12 mm0,50 mm2 on 18 and 30 mm
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
Supp
lyvo
ltage
( UB )
V (min - max)
A
B
B - 4B - 4
B - 5B - 5
B - 5B - 5
•
•
••
••
••
-
-
-7
-10
-15
30
30
3023
3525
3520
-
-
--
--
--
30
30
3030
3535
3535
-
-
--
--
--
3,5
3,5
44
55
66
6,5
M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
7 ÷ 30
7 ÷ 30
7 ÷ 307 ÷ 30
7 ÷ 407 ÷ 40
7 ÷ 407 ÷ 40
2,5
2,5
46
1014
2028
800
800
800600
300200
100100
DSE6,5/4609LKS
DSE8/4609KS
DSE12/4609KSDSE12/5609KS
DSE18/4609KSDSE18/5609KS
DSE30/4609KSDSE30/5609KS
DSE6,5/4619LKS
DSE8/4619KS
DSE12/4619KSDSE12/5619KS
DSE18/4619KSDSE18/5619KS
DSE30/4619KSDSE30/5619KS
200
200
200200
200200
200200
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
L1 L2L5
LED
d
L1 L2
L5
LED
d
L1 L2L5
LED
d
L1 L2L5
LEDd
Housing A
Housing B
Housing B-4
Housing B-5
(*) Note: See mounting precautions (pag. 22)
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing 6,5 and 8 mm: stainless steel • Housing 12 ÷ 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-32
SHORT SERIES - Extended sensing distance • Amplified in d.c. •
Connector output M8 x 1•
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSE6,5/4908LKS)
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
I - 8
I - 6
•
•
-
-
29,5
21
-
8,5
5,5
5,5
35
35
11 - 12
11 - 12
6,5
M8 x 1
2,5
2,5
800
800
200
200
DSE6,5/4909LKS
DSE8/4909KS
DSE6,5/4919LKS
DSE8/4919KS
d
L5L1 L2 L4
M8 x 1
4 x LED1
4
3
d
L1L5
L2 L3L4
4 x LED
M8 x1 1
4
3
Housing I-8
Housing I-6
(*) Note: See mounting precautions (pag. 22)
Materials:• Housing: stainless steel • Sensing face: plastic
M8 x 1SW13
4
10
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-33
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-33
• SHORT SERIES - Extended sensing distance• Amplified in d.c.• Connector output M12 x 1
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSE8/4308KS)
mm mm mm mm mm n° mm mmHz
PNP (positive switching)NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
I
I - 9I - 9
I - 1I - 1
I - 1I - 1
•
••
••
••
-
-7
-10
-15
26
3023
3025
2525
13
1010
1915
1717
8
88
88
88
47
4848
5758
5065
6 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
V (min - max)
7 ÷ 30
7 ÷ 307 ÷ 30
7 ÷ 407 ÷ 40
7 ÷ 407 ÷ 40
2,5
46
1014
2028
800
800600
300200
100100
DSE8/4309KS
DSE12/4309KSDSE12/5309KS
DSE18/4309KSDSE18/5309KS
DSE30/4309KSDSE30/5309KS
DSE8/43C9KS
DSE12/43C9KSDSE12/53C9KS
DSE18/43C9KSDSE18/53C9KS
DSE30/43C9KSDSE30/53C9KS
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
Max
switc
hing
frequ
ency
( f ) ORDERING
REFERENCES
Supp
luvo
ltage
( UB )
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• Rated operational current (Ie): 200 mA• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
d
L5L1 L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
d
L5L1 L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
d
L5
L1 L2 L3 L4
M12 x 1
4 x LED
3
4
2
1
Housing I
Housing I-1
Housing I-9
(*) Note: See mounting precautions (pag. 22)
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
Materials:• Housing 8 mm: stainless steel • Housing 12 ÷ 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:29 Pagina A-34
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
Volta
ge d
rop
(Ud)
V
1,5
1,5
1,5
2,2
2,2
2,2
4
4
2
1
0,8
0,15
150
150
150
250
250
250
d
L5L1 L2
LED
L1 L2 L3L5
LEDd
L1 L2 L3L5
LEDd
With extended temperature range (- 40° ÷ + 85°C) • Amplified in d.c. 3 and 4 wires •
Cable output •
Technical data:• Supply voltage (UB): 10 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): see ordering references• Temperature range: - 40° ÷ + 85°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 6,5 - 8 - 12 mm
0,50 mm2 on 18, 30 and 45 mm• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing B-6
Housing B-3
L1 L2 L3
L5
LED
d
Housing G
Housing A-3
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA6,5/4608LKST)
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L2
mm
L3
mm
L5
mm mm mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
A - 3
B - 6
B - 3
B - 3
G
G
•
•
•
•
•
•
45
40
43
58
50
50
-
5
7
12
10
10
45
45
50
70
60
60
4
4
4
5
6
6
6,5
M8 x 1
M12 x 1
M18 x 1
M30 x 1,5
M45 x 1,5
1,5
1,5
2
5
10
20
DCA6,5/4609LKST
DCA8/4609KST
DCA12/4609KST
DCA18/4609KST
DCA30/4609KST
DCA45/4609KST
DCA6,5/4619LKST
DCA8/4619KST
DCA12/4619KST
DCA18/4619KST
DCA30/4619KST
DCA45/4619KST
NO + NC
I blackbrown
whiteblue
+
---
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
-
-
-
DCA18/4629KST
DCA30/4629KST
DCA45/4629KST
Materials:• Cable: 2 m thermoplastic 140°C; 300 V; O.R. • Housing 6,5 and 8 mm: stainless steel • Housing 12 ÷ 45 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
M45 x 1,5SW55
5
70
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-35
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thkns mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-35
Hous
ing
I - 16
I - 17
I - 18
I - 19
I - 19
d
L5
L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-19
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
Volta
ge d
rop
(Ud)
V
1,5
1,5
2,2
2,2
2,2
4
2
1
0,8
0,15
150
150
250
250
250
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA8/4308KST)
Flush
mou
nting
Non
flush
mou
nting
Body
diam
eter
( d )L2
mm
L3
mm
L4
mm mm mm
Nom
inal
sens
ing
dist.
( S n
)±10
%
mm
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
•
•
•
•
•
40
43
50
65
50
12
15
19
17
19
8
8
8
8
8
60
66
77
90
77
M8 x 1
M12 x 1
M18 x 1
M30 x 1,5
M45 x 1,5
1,5
2
5
10
20
DCA8/4309KST
DCA12/4309KST
DCA18/4309KST
DCA30/4309KST
DCA45/4309KST
DCA8/43C9KST
DCA12/43C9KST
DCA18/43C9KST
DCA30/43C9KST
DCA45/43C9KST
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
NO + NC
I 4 black1 brown
2 white3 blue
+
---
-
DCA12/4329KST
DCA18/4329KST
DCA30/4329KST
DCA45/4329KST
• With extended temperature range (-40° ÷ + 85°C)• Amplified in d.c. 3 and 4 wires• Connector output M12 x 1
Technical data:• Supply voltage (UB): 10 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): see ordering references• Temperature range: - 40° ÷ + 85°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
d
L5L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
d
L5L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-17
Housing I-18
d
L5L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-16
L5
Fem
ale
conn
ecto
r(se
e pa
g. H
- 1)
n°
8B -10...T
8B -10...T
8B -10...T
8B -10...T
8B -10...T
Materials:• Housing 8 mm: stainless steel • Housing 12 ÷ 45 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thkns mm 4 4 4
10 15 35
SW365
80
M45 x 1,5SW55
5
70
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-36
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
Volta
ge d
rop
(Ud)
V
1,5
1,5
1,5
2,2
2,2
2,2
4
4
2
1
0,8
0,15
150
150
150
250
250
250
d
L5L1 L2
Housing A-3
L1 L2 L3L5
d
L1 L2 L3L5
d
d
L1L5
L2
L1 L2 L3
L5
d
For high temperatures (-25° ÷ +125°C) •Amplified in d.c. 3 and 4 wires •
Cable output •
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA6,5/4608LKT)
Technical data:• Supply voltage (UB): 10 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): see ordering references• Temperature range: - 25° ÷ +125°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Cable conductor cross section: 0,35 mm2 on 6,5 - 8 - 12 mm
0,50 mm2 on 18 - 30 - 45 mm• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L2
mm
L3
mm
L5
mm mm mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
A - 3
B - 6
B - 3
B - 7
G
G
•
•
•
•
•
•
45
40
43
65
50
50
-
5
7
-
10
10
45
45
50
65
60
60
4
4
4
5
6
6
6,5
M8 x 1
M12 x 1
M18 x 1
M30 x 1,5
M45 x 1,5
1,5
1,5
2
5
10
20
DCA6,5/4609LKT
DCA8/4609KT
DCA12/4609KT
DCA18/4609KT
DCA30/4609KT
DCA45/4609KT
DCA6,5/4619LKT
DCA8/4619KT
DCA12/4619KT
DCA18/4619KT
DCA30/4619KT
DCA45/4619KT
NO + NC
I blackbrown
whiteblue
+
---
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
-
-
-
DCA18/4629KT
DCA30/4629KT
DCA45/4629KT
Housing B-6
Housing B-3
Housing B-7
Housing G
Materials:• Cable: 2 m thermoplastic 140°C; 300 V; O.R. • Housing 6,5 and 8 mm: stainless steel • Housing 12 ÷ 45 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
10 15 35
SW365
80
M45 x 1,5SW55
5
70
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-37
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-37
Hous
ing
I - 11
I - 7
I - 12
I - 2
I - 2
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
Volta
ge d
rop
(Ud)
V
1,5
1,5
2,2
2,2
2,2
4
2
1
0,8
0,15
150
150
250
250
250
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA8/4308KT)
Flush
mou
nting
Non
flush
mou
nting
Body
diam
eter
( d )L2
mm
L3
mm
L4
mm mm mm
Nom
inal
sens
ing
dist.
( S n
) ±
10%
mm
PNP (positive switching)
ORDERINGREFERENCES
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
•
•
•
•
•
40
43
50
65
50
12
15
19
17
19
8
8
8
8
8
60
66
77
90
77
M8 x 1
M12 x 1
M18 x 1
M30 x 1,5
M45 x 1,5
1,5
2
5
10
20
DCA8/4309KT
DCA12/4309KT
DCA18/4309KT
DCA30/4309KT
DCA45/4309KT
DCA8/43C9KT
DCA12/43C9KT
DCA18/43C9KT
DCA30/43C9KT
DCA45/43C9KT
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 white3 blue ---
+
NO + NC
I 4 black1 brown
2 white3 blue
+
---
-
DCA12/4329KT
DCA18/4329KT
DCA30/4329KT
DCA45/4329KT
• For high temperatures (-25° ÷ + 120°C)• Amplified in d.c. 3 and 4 wires• Connector output M12 x 1
Technical data:• Supply voltage (UB): 10 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): see ordering references• Temperature range: - 25° ÷ +120° C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
L5
Fem
ale
conn
ecto
r(se
e pa
g. H
- 1)
n°
8B -10...T
8B -10...T
8B -10...T
8B -10...T
8B -10...T
Materials:• Housing 8 mm: stainless steel • Housing 12 ÷ 30 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
d
L5
L2 L3
M12 x 1
L4
3
4
2
1
Housing I-19
d
L5L2 L4
M12 x 1
L3
3
4
2
1
d
L5L2 L4
M12 x 1
L3
3
4
2
1
Housing I-17
Housing I-18
d
L5L2 L4
M12 x 1
L3
3
4
2
1
Housing I-16
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-38
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-39
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
General Features:This new series solves definitively the problem of the ingress of liquids to the innerparts of the sensors. Thanks to the inner hermetic sealing they can be submitted to no-stop jets of liquids under pressure even in presence of temperature changes.They find application in automatic washing machinery, in machines subject to waterjets and in continuous immersion applications.
Technical data:• Supply voltage (UB): 7 ÷ 60 Vdc• Max ripple: 10%• Rated operational current (Ie): 400 mA• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP68• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
NO
I1 brown4 black3 blue ---
+
Fem
ale
conn
ecto
r
n°
--
--
6 - 8B -106 - 8B -10
ORDERING REFERENCES
PNP (positive switching)
Degree of protection IP68 • Amplified in d.c. 3 and 4 wires •
Cable and connector output M12 x 1 •
d
L1
L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
L1 L2
L5
LED
d
d
L1
L5
L2 L3
LED
Housing J-1
Housing J-2
Housing I-12
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal
sens
ing
dista
nce
( Sn )±
10%
mm
Max
switc
hing
frequ
ency
( f )
KHz
J - 1J - 1
J - 2J - 2
I - 12I - 12
••
••
••
-10
-10
-10
5040
5848
5050
--
1212
1919
5050
7070
7787
--
--
88
55
55
--
M18 x 1M18 x 1
M18 x 1M18 x 1
M18 x 1M18 x 1
58
58
58
11
11
11
DCA18/4A09KSJDCA18/5A09KSJ
DCA18/4609KSJDCA18/5609KSJ
DCA18/4309KSJDCA18/5309KSJ
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA18/4A08KSJ)
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the whitewire.
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the white wire.
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing and gland: nickel plated brass• Sensing face: plastic
M18 x 1SW24
4
35
Diameter
Max tightening torque Nm
NutSizeThickness mm
DCA18/4A19KSJDCA18/5A19KSJ
DCA18/4619KSJDCA18/5619KSJ
DCA18/43C9KSJDCA18/53C9KSJ
--
DCA18/4629KSJDCA18/5629KSJ
DCA18/4329KSJDCA18/5329KSJ
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-39
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-39
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
Max
switc
hing
frequ
ency
( f )
KHz
0,80,6
0,80,6
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
200200
200200
General Features:This new series solves definitively the problem of the ingress of liquids to the innerparts of the sensors. Thanks to the inner hermetic sealing they can be submitted to no-stop jets of liquids under pressure even in presence of temperature changes.They find application in automatic washing machinery, in machines subject to waterjets and in continuous immersion applications.
Technical data:• Supply voltage (UB): 5 ÷ 40 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP68• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
NO
I1 brown4 black3 blue ---
+
Fem
ale
conn
ecto
r
n°
--
6 - 8B -106 - 8B -10
ORDERING REFERENCES
PNP (positive switching)
• SHORT SERIES - degree of protection IP68• Amplified in d.c. 3 wires• Cable and connector output M12 x 1
L1 L2
L5
LED
d
Housing J-3
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal
sens
ing
dista
nce
( Sn )±
10%
mm
J - 3J - 3
I - 1I - 1
••
••
-10
-10
3020
2515
--
1515
3030
4848
--
88
55
--
M18 x 1M18 x 1
M18 x 1M18 x 1
58
58
DSA18/4609KSJDSA18/5609KSJ
DSA18/4309KSJDSA18/5309KSJ
DSA18/4619KSJDSA18/5619KSJ
DSA18/43C9KSJDSA18/53C9KSJ
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSA18/4608KSJ)
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the whitewire.
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the white wire.
d
L5
L1 L2 L3 L4
M12 x 1
4 x LED
3
4
2
1
Housing I-1
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing and gland: nickel plated brass• Sensing face: plastic
M18 x 1SW24
4
35
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-40
M30 x 1,5SW36
5
80
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-41
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Non polarized •Amplified in d.c. 2 wires •
Cable output •
L1 L2 L3L5
LEDd
Housing B-6
L1 L2 L3L5
LEDd
General Features:These sensors are not polarized and the load can be connected on both posi-tive and negative lead (function PNP or NPN).So they can replace traditional mechanical microswitches in many applica-tions.
Technical data:• Supply voltage (UB): 10 ÷ 55 Vdc• Max ripple: 10% • Off-state current (Ir): ≤ 1 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud) with Ie = 10 mA: ≤ 5 V• Voltage drop (Ud) with Ie = 100 mA: ≤ 6 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,34 mm2 on 8 and 12 mm
0,50 mm2 on 18 mm0,75 mm2 on 30 mm
• Protected against short-circuit and overload (versions with letter K)• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hou
sing
Flus
h m
ount
ing
Non
flus
h m
ount
ing
Cab
le
diam
eter
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal s
ensin
gdi
stanc
e ( S
n )±
10%
mm
Max
switc
hing
frequ
ency
( f )
Hz
Rate
d op
erat
iona
lcu
rrent
(Ie)
mA
ORDERINGREFERENCES
NOI black
black
B - 6B - 6
B - 3B - 3
B - 2B - 2
GG
• •
• •
• •
• •
-5
-7
-10
-15
4035
4336
5040
5035
55
77
--
1010
--
--
--
--
4545
5050
5050
6060
44
44
55
66
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
12001000
12001000
1100700
800400
100100
200200
250250
250250
DCM8/4600SDCM8/5600S
DCM12/4600KSDCM12/5600KS
DCM18/4A00KSDCM18/5A00KS
DCM30/4600KSDCM30/5600KS
NCI black
black
DCM8/4610SDCM8/5610S
DCM12/4610KSDCM12/5610KS
DCM18/4A10KSDCM18/5A10KS
DCM30/4610KSDCM30/5610KS
Housing B-3
L1 L2
L5
LED
d
Housing B-2
L1 L2 L3
L5
LED
d
Housing G
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1Size SW13 SW17 SW24
4 4 4
10 15 35
Diameter
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing 8 mm: stainless steel• Housing 12-18-30 mm: nickel plated brass• Sensing face: plastic PBT
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-41
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
ORDERINGREFERENCES
mm mm mm mm mm n° mm mm
NO (connectors 3 or 4 wires)I 3 blue
4 black
NC (connectors 4 wires)I 1 brown
2 white
I - 11I - 11
I - 7I - 7
I - 12I - 12
I - 2I - 2
••
••
••
••
-5
-7
-10
-15
4035
4336
5050
6550
1212
1515
1919
1717
88
88
88
88
6060
6666
7787
9090
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
Hz
12001000
12001000
1100700
800400
1,52,5
24
58
1015
DCM8/4300SDCM8/5300S
DCM12/4300KSDCM12/5300KS
DCM18/4300KSDCM18/5300KS
DCM30/4300KSDCM30/5300KS
DCM8/4310SDCM8/5310S
DCM12/4310KSDCM12/5310KS
DCM18/4310KSDCM18/5310KS
DCM30/4310KSDCM30/5310KS
Hou
sing
Flus
h m
ount
ing
Non
flus
h m
ount
ing
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
mA
100100
200200
250250
250250
Rate
d op
erat
iona
lcu
rren
t (I e)
Max
switc
hing
frequ
ency
( f )
in d
.c.
General Features:These sensors are not polarized and the load can be connected on both posi-tive and negative sectors (function PNP or NPN).So they can replace traditional mechanical microswitches in many applica-tions. Utilization of connectors without LED is recommended.
Technical data:• Supply voltage (UB): 10 ÷ 55 Vdc• Max ripple: 10% • Off-state current (Ir): ≤ 1 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud) with Ie = 10 mA: ≤ 5 V• Voltage drop (Ud) with Ie = 100 mA: ≤ 6 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload (versions with letter K)• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
d
L1
L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-7
Housing I-12
d
L1L5
L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-2
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-11
• Non polarized• Amplified in d.c. 2 wires• Connector output
M30 x 1,5SW36
5
80Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1Size SW13 SW17 SW24
4 4 4
10 15 35
Diameter
Materials:• Housing 8 mm: stainless steel• Housing 12- 18 - 30 mm: nickel plated brass• Sensing face: plastic PBT
Nom
inal s
ensin
gdis
tance
( Sn )
±10
%
Thickness mm
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-42
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-43
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
50 200
ORDERINGREFERENCES
PNP (positive switching)NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
Stainless steel sensing face •Amplified in d.c. 3 wires •
Cable output •
LED
d
L5
Housing B-8
General Features:This particular type of sensor has increased mechanical and chemical resistance:
• fluid ingress resistant• pressure resistant• corrosion resistant• impact resistant• vibration resistant• abrasion and incandescent objects resistant
These particulars characteristics are mainly dependent by the building of the body,which is made from a single solid piece of stainless steel. The absence of junctionsdoesn’t allow the fluid ingress through the sensing face. A very special sealingsystem on the back side makes of this sensor the ideal solution for the most criticalapplications.
Technical data:• Supply voltage (UB): 7 ÷ 40 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP68• Max pressure on the front side: 50 bar• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
(*)
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( Sn )
±10%
mm
B - 8 • - - - 45- 5 M18 x 1 5 DCA18/4609MKSJ DCA18/4619MKSJ
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA18/4608MKSJ)
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
(*) Note: See mounting precautions (pag. 22)
M18 x 1SW24
4
35
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: stainless steel• Sensing face: stainless steel
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-43
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-43
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
ORDERINGREFERENCES
NPN (negative switching)
NOI
brownblackblue ---
+
• Amplified in d.c. 3 wires• High precision• Switching hysteresis < 1 μm• Cable output
General Features:This unique sensor enables the detection of metallic targets with extremely high preci-sion without contact. By using an implemented software algorithm and a laserworking process it has a very stable and precise switching point with a hysteresislower than 1 µm.
Applications:• Semiconductors industry• Quality control instruments• High precision mechanical devices• Calibration equipments
Technical data:• Supply voltage (UB): 5 ÷ 13 Vdc• Consumption: ≤ 10 mA• Voltage drop (Io =10 mA): ≤ 0.5 V• Voltage drop (Io =100 mA): ≤ 1 V• Output polarity: NPN open collector• Output logic: normally open• Repeat accuracy (R): < ± 2 µm• Switch hysteresis (H): < 1 µm • Temperature range: 10 ÷ 40°C• Degree of protection: IP67• Cable conductor cross section: 0,22 mm2
• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
mm
3,5
Cabl
e di
amete
r
IPS05/4608KS
Sens
ordi
amete
r
mm
M5 x 0,5
Ampl
ifier
diam
eter
mm
8
Nom
inal
sens
ing
dista
nce
( Sn )±
10%
mm
0,9
Max
switc
hing
frequ
ency
( f )
Hz
100
Rate
d op
erat
iona
lcu
rren
t (I e)
(
mA
100
460
ø 1,8
ø 820
SW7
M5 x 0,5
sensingzone
38 2 m
ø 3,5
yellow ring LED around the cable
Flush
mou
nting
Non
flush
mou
nting
•
M5 x 0,5SW72,5
2
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C• Housing sensor and amplifier: stainless steel
Sensor Amplifier (smooth body)
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-44
M12 x 1
M18 x 1M18 x 1
Body
diam
eter
( d )
Mea
sure
rang
e
mm
1 ÷ 4
2 ÷ 73 ÷ 9
Linea
rity
erro
r max
%
5
33
No-
load
supp
lycu
rrent
mA
4
44
Hz
250
250250
Repe
at
accu
racy
( R
)
%
0,5
0,50,5
General Features:These inductive proximity sensors provide an output current directly or reverselyproportional to the distance between the sensing face and the metal target. Theoutput current is also dependent by the material of the target, so they can beused not only to detect distances, displacements, vibrations and wavings butalso to recognize the composition of metals and alloys. In the two wires configu-ration, they are reversal polarity and short circuit protected devices compliant tothe 4-20 mA industrial standard.
Use of the sensor:The output current flows through the external load RL generating a voltage (Vo) usedto drive the input stage of the measuring instrument. The correct value of RL can bechosed accordingly to the values of power supply Vdc and the wanted Vout rangeas reported on the tables.
Technical data:• Supply voltage: 10 ÷ 40 Vdc• Max ripple: 20%• Output current range: 0 ÷ 16 mA or 4 ÷ 20 mA• Temperature range: - 10° ÷ + 70°C• Max thermal drift: < 10%• Degree of protection: IP67• Cable conductor cross section: 0,22 mm2 + shield on 12 mm
0,35 mm2 + shield on 18 mm
• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
246810121416182022
1 2 3 4 5 6 7 8 9 10 12
I (mA)
Graph 1d (mm)
DCAL 18/4A09
DCAL 18/5A09
DCAL 12/4609
DCAL 18/4A19
DCAL 18/5A19
1 2 3 4 5 6 7 8 9 10 12 d (mm)Graph 2
246810121416182022
I (mA)
DCAL 12/4619
Typical curves
L1 L2 L3L5
d
Housing B-3
L1 L2
L5
d
Housing B-2
Diameters 12 - 18 mm •Analog with linear current output •
Cable output •
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
L1
mm
L2
mm
L3
mm
L5
mm mm mm
ORDERINGREFERENCES
INVERSELY PROPORTIONAL
Graph 1
DIRECTLYPROPORTIONAL
Graph 2
B - 3
D - 1D - 1
•
••
-
-10
43
5040
7
--
50
5050
4
55
DCAL12/4609
DCAL18/4A09DCAL18/5A09
DCAL12/4619
DCAL18/4A19DCAL18/5A19
brownblackblue
4...20mA- Vdc
Vout+Vdc
RL
RL (max) = (Vdc-10) KΩ20
brownblackblue Vout
0...16 mA-Vdc
+Vdc
RL
2 wires connection 3 wires connection
Vout (V)
0,4 ... 22 ... 104 ... 20
1005001000
122030
RL (ohm) Vdc (min)
RL (max) = (Vdc-5) KΩ16
Vout (V)0 ... 10 ... 100 ... 160 ... 200 ... 30
62,5625100012501875
1115212535
RL (ohm) Vdc (min)
Diameter
Max tightening torque Nm
Nut
M12 x 1 M18 x 1Size SW17 SW24Thickness mm 4 4
15 35
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.
shielded • Housing: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-45
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Max
switc
hing
frequ
ency
( f )
Catalogo Inglese 2 (A01-A46) Ok 23-01-2007 13:30 Pagina A-45
Hz
250250
250
Repe
atac
cura
cy (
R )
%
0,50,5
0,5
General Features:These inductive proximity sensors provide an output current directly or reverselyproportional to the distance between the sensing face and the metal target. Theoutput current is also dependent by the material of the target, so they can beused not only to detect distances, displacements, vibrations and wavings butalso to recognize the composition of metals and alloys. In the two wires configu-ration, they are reversal polarity and short circuit protected devices compliant tothe 4-20 mA industrial standard.
Use of the sensor:The output current flows through the external load RL generating a voltage (Vo) usedto drive the input stage of the measuring instrument. The correct value of RL can bechosed accordingly to the values of power supply Vdc and the wanted Vout rangeas reported on the tables.
Technical data:• Supply voltage: 10 ÷ 40 Vdc• Max ripple: 20%• Output current range: 0 ÷ 16 mA or 4 ÷ 20 mA• Temperature range: - 10° ÷ + 70°C• Max thermal drift: < 10%• Degree of protection: IP67
• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
10 20 30 40 50 60 70 80
246810121416182022
I (mA)
d (mm)
Graph 1
DCAL 30/5609
DCAL 80/5809
DCAL 30/4609
Graph 2d (mm)
246810121416182022
I (mA) DCAL 30/4619
DCAL 30/5619
DCAL 80/5819
10 20 30 40 50 60 70 80
Typical curves
brownblackblue
4...20mA- Vdc
Vout+Vdc
RL
RL (max) = (Vdc-10) KΩ20
brownblackblue Vout
0...16 mA-Vdc
+Vdc
RL
L1 L2 L3
L5
d
Housing G
80
6580
5,5
65
45
5,515
sensing zone
• Diameters 30 - 80 mm • Analog with linear current output• Cable output
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
e di
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Mea
sure
rang
e
mm
ORDERINGREFERENCES
INVERSELY PROPORTIONAL
Graph 1
DIRECTLYPROPORTIONAL
Graph 2
GG
P
••
•
-15
-
5035
-
1010
-
6060
-
--
-
55
5
M30 x 1,5M30 x 1,5
80
4 ÷ 125 ÷ 18
20 ÷ 60
Max
imum
lin
earit
y er
ror
%
55
5
No-
load
supp
lycu
rrent
mA
44
4
DCAL30/4609DCAL30/5609
DCAL80/5809
DCAL30/4619DCAL30/5619
DCAL80/5819
Housing P
Vout (V)
0,4 ... 22 ... 104 ... 20
1005001000
152030
RL (ohm) Vdc (min)
RL (max) = (Vdc-5) KΩ16
Vout (V)0 ... 10 ... 100 ... 160 ... 200 ... 30
62,5625100012501875
1115212535
RL (ohm) Vdc (min)
2 wires connection 3 wires connection
M30 x 1,5SW36
5
80
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.
shielded • Housing 30 mm: nickel plated brass• Housing 80 mm: plastic• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Max
switc
hing
frequ
ency
( f )
A046 9-02-2007 9:03 Pagina A-46
d
L1L5
L2 L4
M12 x 1
L3
3
4
2
1
Housing A-7
246810121416182022
1 2 3 4 5 6 7 8 9 10 12
I (mA)
Graph 1d (mm)
DCAL 18/4309B
DCAL 18/5309B
DCAL 12/4309B
DCAL 18/4319B
DCAL 18/5319B
1 2 3 4 5 6 7 8 9 10 12 d (mm)Graph 2
246810121416182022
I (mA)
Typical curves
Diameters 12 - 18 mm •Analog with linear current output •
Connector output M12 x 1 •
d
L1
L5
L2 L4
M12 x 1
L3
3
4
2
1
General Features:These inductive proximity sensors provide an output current directly or reversely pro-portional to the distance between the sensing face and the metal target. The outputcurrent is also dependent by the material of the target, so they can be used not onlyto detect distances, displacements, vibrations and wavings but also to recognizethe composition of metals and alloys. In the two wires configuration, they are rever-sal polarity and short circuit protected devices compliant to the 4-20 mA industrialstandard.It is recommended the use of connectors without LED.For applications subjected to high levels of electromagnetic interferences, it is recom-mended the use of the straight connector with shielded cable type C10/00…VSwhich offers a 360° shielding.
Use of the sensor:The output current flows through the external load RL generating a voltage (Vo) usedto drive the input stage of the measuring instrument. The correct value of RL can bechosed accordingly to the values of power supply Vdc and the wanted Vout rangeas reported on the tables.
Technical data:• Supply voltage: 10 ÷ 40 Vdc• Max ripple: 20%• Output current range: 0 ÷16 mA or 4 ÷ 20 mA• Temperature range: - 10° ÷ + 70°C• Max thermal drift: < 10%• Degree of protection: IP67• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing I-12
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm n° mm
L4
mm
Mea
sure
rang
e
mm
ORDERINGREFERENCES
INVERSELY PROPORTIONAL
Graph 1
DIRECTLYPROPORTIONAL
Graph 2
A - 7
I - 12I - 12
•
••
-
-10
43
5050
15
1414
66
7484
8
1010
6 - 8B - 10
6 - 8B - 106 - 8B - 10
M12 x 1
M18 x 1M18 x 1
1 ÷ 4
2 ÷ 73 ÷ 9
Max
imum
lin
earit
y er
ror
%
5
33
No-
load
supp
lycu
rrent
mA
4
44
Max
switc
hing
frequ
ency
( f )
Hz
250
250250
Repe
atac
cura
cy
%
0,5
0,50,5
DCAL12/4309B
DCAL18/4309BDCAL18/5309B
-
DCAL18/4319BDCAL18/5319B
143
4...20mA- Vdc
Vout+Vdc
RL
143 Vout
0...16 mA-Vdc
+Vdc
RL
2 wires connection 3 wires connection
RL (max) = (Vdc-10) KΩ20
Vout (V)
0,4 … 22 … 104 … 20
1005001000
152030
RL (ohm) Vdc (min)
Diameter
Max tightening torque Nm
Nut
M12 x 1 M18 x 1Size SW17 SW24Thickness mm 4 4
15 35
Materials:• Housing: nickel plated brass• Sensing face: plastic
RL (max) = (Vdc-5) KΩ16
Vout (V)0 … 10 … 100 … 160 … 200 … 30
62,5625100012501875
1115212535
RL (ohm) Vdc (min)
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-47
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-47
Max
switc
hing
frequ
ency
( f )
Hz
250250
250
Repe
atac
cura
cy
%
0,50,5
0,5
Diameter
Max tightening torque Nm
Nut
M30 x 1,5Size SW36Thickness mm 5
80
246810121416182022
I (mA)
d (mm)
Graph 1
DCAL 30/5309B
DCAL 80/5309
DCAL 30/4309B
Graph 2d (mm)
246810121416182022
I (mA) DCAL 30/4319B
DCAL 30/5319B
DCAL 80/5319
10 20 30 40 50 60 70 8010 20 30 40 50 60 70 80
Typical curves
• Diameters 30 - 80 mm• Analog with linear current output• Connector output M12 x 1
d
L1L5
L2 L3
M12 x 1
L4
3
4
2
1
80
6580
5,5
65
45
5,5
M12 x 1
15
sensing zone
General Features:These inductive proximity sensors provide an output current directly or reversely pro-portional to the distance between the sensing face and the metal target. The outputcurrent is also dependent by the material of the target, so they can be used not onlyto detect distances, displacements, vibrations and wavings but also to recognizethe composition of metals and alloys. In the two wires configuration, they are rever-sal polarity and short circuit protected devices compliant to the 4-20 mA industrialstandard. It is recommended the use of connectors without LED.For applications subjected to high levels of electromagnetic interferences, it is recom-mended the use of the straight connector with shielded cable type C10/00…VSwhich offers a 360° shielding.
Use of the sensor:The output current flows through the external load RL generating a voltage (Vo) usedto drive the input stage of the measuring instrument. The correct value of RL can bechosed accordingly to the values of power supply Vdc and the wanted Vout rangeas reported on the tables.
Technical data:• Supply voltage: 10 ÷ 40 Vdc• Max ripple: 20%• Output current range: 0 ÷16 mA or 4 ÷ 20 mA• Temperature range: - 10° ÷ + 70°C• Max thermal drift: < 10%• Degree of protection: IP67• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing A-2
Housing P-1
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm n° mm
L4
mm
Mea
sure
rang
e
mm
ORDERINGREFERENCES
INVERSELY PROPORTIONAL
Graph 1
DIRECTLYPROPORTIONAL
Graph 2
A - 2A - 2
P - 1
••
•
-15
-
6550
-
1515
-
8888
-
88
-
6 - 8B - 106 - 8B - 10
6 - 8B - 10
M30 x 1,5M30 x 1,5
80
4 ÷ 125 ÷ 18
20 ÷ 60
Max
imum
lin
earit
y er
ror
%
55
5
No-
load
supp
lycu
rrent
mA
44
4
DCAL30/4309BDCAL30/5309B
DCAL80/5309
DCAL30/4319BDCAL30/5319B
DCAL80/5319
143
4...20mA- Vdc
Vout+Vdc
RL
143 Vout
0...16 mA-Vdc
+Vdc
RL
2 wires connection 3 wires connection
RL (max) = (Vdc-10) KΩ20
Vout (V)
0,4 … 22 … 104 … 20
1005001000
152030
RL (ohm) Vdc (min)
RL (max) = (Vdc-5) KΩ16
Vout (V)0 … 10 … 100 … 160 … 200 … 30
62,5625100012501875
1115212535
RL (ohm) Vdc (min)
Materials:• Housing 30 mm: nickel plated brass• Housing 80 mm: plastic• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-48
Max
switc
hing
frequ
ency
( f )
Hz
250
250250
250250
Repe
atac
cura
cy
%
0,5
0,50,5
0,50,5
I
---VdcVout
+Vdcbrownblackblue
Graph 1 Graph 2
-2
0
2
4
6
8
10
12
Vout (V)
d (mm)
DCAL 18/4A19V
5 10 15 20 25
DCAL 18/5A19V
DCAL 30/4619V
DCAL 30/5619V
DCAL 12/4619V
-2
0
2
4
6
8
10
12
Vout (V)
d (mm)
DCAL 12/4609V
5 10 15 20 25
DCAL 18/5A09V
DCAL 30/4609V
DCAL 30/5609V
DCAL 18/4A09V
Analog with linear voltage output •
Cable output •
Connections
L1 L2
L5
d
Housing B-2
L1 L2 L3
L5
d
Housing G
General Features:These inductive proximity sensors provide an output voltage 0÷10V directly or rever-sely proportional to the distance between the sensing face and the metal target. Theoutput voltage is also dependent by the material of the target, so they can be usednot only to detect distances, displacements, vibrations and wavings but also to reco-gnize the composition of metals and alloys.
Technical data:• Supply voltage: 15 ÷ 40 Vdc• Max ripple: 20%• Voltage drop output: 0 ÷ 10 V• Temperature range: - 10° ÷ + 70°C• Max thermal drift: < 10%• Degree of protection: IP67• Cable conductor cross section: 0,22 mm2 + shield on 12 mm
0,35 mm2 + shield on 18 - 30 mm
• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
Mea
sure
rang
e
mm
ORDERINGREFERENCES
INVERSELY PROPORTIONAL
Graph 1
DIRECTLYPROPORTIONAL
Graph 2
B - 3
B - 2B - 2
GG
•
••
••
-
-10
-15
43
5040
5035
7
--
1010
50
5050
6060
4
55
55
M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1 ÷ 4
2 ÷ 73 ÷ 9
4 ÷ 125 ÷ 18
Max
imum
lin
earit
y er
ror
%
3
33
55
No-
load
supp
lycu
rrent
mA
4
44
44
DCAL12/4609V
DCAL18/4A09VDCAL18/5A09V
DCAL30/4609VDCAL30/5609V
DCAL12/4619V
DCAL18/4A19VDCAL18/5A19V
DCAL30/4619VDCAL30/5619V
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24 SW36
Thickness mm 4 5
35 80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.
shielded• Housing: nickel plated brass• Sensing face: plastic
Typical curves
L1 L2 L3L5
d
Housing B-3
M12 x 1SW17
4
15
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-49
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-49
Max
switc
hing
frequ
ency
( f )
Hz
250
250250
250250
Repe
atac
cura
cy
%
0,5
0,50,5
0,50,5
Graph 1 Graph 2
-2
0
2
4
6
8
10
12
Vout (V)
d (mm)
DCAL 12/4309V
5 10 15 20 25
DCAL 18/5309V
DCAL 30/4309V
DCAL 30/5309V
-2
0
2
4
6
8
10
12
Vout (V)
d (mm)
DCAL 12/4319V
5 10 15 20 25
DCAL 18/5319V
DCAL 30/4319V
DCAL 30/5319V
DCAL 18/4309V
DCAL 18/4319V
• Analog with linear voltage output
• Connector output M12 x 1
d
L1
L5
L2 L4
M12 x 1
L3
3
4
2
1
d
L1L5
L2 L3
M12 x 1
L4
3
4
2
1
General Features:These inductive proximity sensors provide an output voltage 0÷10V directly or rever-sely proportional to the distance between the sensing face and the metal target. Theoutput voltage is also dependent by the material of the target, so they can be usednot only to detect distances, displacements, vibrations and wavings but also to reco-gnize the composition of metals and alloys.It is recommended the use of connectors without LED.For applications subjected to high levels of electromagnetic interferences, it is recom-mended the use of the straight connector with shielded cable type C10/00…VSwhich offers a 360° shielding.
Technical data:• Supply voltage: 15 ÷ 40 Vdc• Max ripple: 20%• Output current range: 0 ÷ 10 V• Temperature range: - 10° ÷ + 70°C• Max thermal drift: < 10%• Degree of protection: IP67• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
I
--- VdcVout 0...10 V+ Vdc1
43
Materials:• Housing: nickel plated brass• Sensing face: plastic
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm n° mm
L4
mm
Mea
sure
rang
e
mm
ORDERINGREFERENCES
INVERSELY PROPORTIONAL
Graph 1
DIRECTLYPROPORTIONAL
Graph 2
A - 7
I - 12I - 12
A - 2A - 2
•
••
••
-
-10
-15
43
5050
6550
15
1414
1515
66
7484
8888
8
1010
88
6 - 8B - 10
6 - 8B - 106 - 8B - 10
6 - 8B - 106 - 8B - 10
M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1 ÷ 4
2 ÷ 73 ÷ 9
4 ÷ 125 ÷ 18
Max
imum
lin
earit
y er
ror
%
5
33
55
No-
load
supp
lycu
rrent
mA
4
44
44
DCAL12/4309V
DCAL18/4309VDCAL18/5309V
DCAL30/4309VDCAL30/5309V
DCAL12/4319V
DCAL18/4319VDCAL18/5319V
DCAL30/4319VDCAL30/5319V
Typical curves
Housing I-12
Housing A-2
Connections
d
L1L5
L2 L4
M12 x 1
L3
3
4
2
1
Housing A-7
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24 SW36
Thickness mm 4 5
35 80
M12 x 1SW17
4
15
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-50
A.C.
L1 L2
L5
LED
d
Housing B-2
5 output functions • Amplified in d.c. + a.c. 2 wires •
Cable output •
L1 L2 L3
L5
LED
d
General Features:When used in a.c. they work as normally open. When used in d.c. they can workas normally open or normally closed simply by reversing the connection wires. The load can be connected indifferently on the positive or on the negative pole.These sensors put together the four functions of traditional 3 wires amplified sensors:PNP - NO; PNP - NC; NPN - NO; NPN - NC. Besides the a.c. working in manyapplications they can replace directly electromechanical microswitches.
Technical data:• Supply voltage (UB): 10 ÷ 60 Vdc/Vac• Electrical system frequency: 40 ÷ 60 Hz• Max ripple: 10%• Off-state current (Ir): ≤ 0,6 mA • Minimum operational current (Im): 5 mA• Rated operational current (Ie): 400 mA• Voltage drop (Ud): ≤ 4 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• LED indication: yellow = output state
blinking red = output short circuit• Cable conductor cross section: 0,75 mm2
• Protected against short-circuit and overload• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN61000-6-2/- 4
Housing G
ORDERINGREFERENCES
PNPNO
I +
-Rxblue
brownNC
I +
-Rx
bluebrown
NPNNO
I
blue
brownRx
-
+
NCI blue
brownRx
-
+
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±1
0%
mm
Max
switc
hing
frequ
ency
( f )
Hz
B - 2B - 2
GG
••
••
-10
-15
5040
5035
--
1010
5050
6060
mm
55
55
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
58
1015
800400
600300
DX18/4A5XKSDX18/5A5XKS
DX30/465XKSDX30/565XKS
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24 SW36Thickness mm 4 5
35 80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: nickel plated brass• Sensing face: plastic
NOI
blue
brown
Rx
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-51
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
A051 9-02-2007 8:58 Pagina A-51
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
800400
600300
400400
400400
• 5 output functions• Amplified in d.c. + a.c. 2 wires• Connector output M12 x 1
d
L1
L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-12
d
L1L5
L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
General Features:When used in a.c. they work as normally open. When used in d.c. they can workas normally open or normally closed simply by reversing the connection wires. The load can be connected indifferently on the positive or on the negative pole.These sensors put together the four functions of traditional 3 wires amplified sensorsbesides the a.c. working. In many applications they can replace directly electrome-chanical microswitches.
Technical data:• Supply voltage (UB): 10 ÷ 60 Vdc/Vac• Electrical system frequency: 40 ÷ 60 Hz• Max ripple: 10%• Off-state current (Ir): ≤ 0,6 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 4 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Housing I-2
ORDERINGREFERENCES
PNPNO
I +
---Rx
1 brown4 blue
NCI +
---Rx
4 blue1 brown
NPNNO
I
4 blue
1 brownRx
---
+
NCI
1 brown
4 blueRx
---
+
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm
Nom
inal
sens
ing
dista
nce
( Sn ) ±
10%
mm
I -12I -12
I - 2I - 2
-10
-15
5050
6550
1919
1717
88
88
7787
9090
n°
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
58
1015
DX18/435XKSDX18/535XKS
DX30/435XKSDX30/535XKS
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24 SW36Thickness mm 4 5
35 80
Materials:• Housing: nickel plated brass• Sensing face: plastic
••
••
A.C.
NOI
4 blue
1 brown
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-52
Max
switc
hing
frequ
ency
( f )
in d
.c.
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
1000800
800600
800400
400200
Max
switc
hing
frequ
ency
( f )
in a
.c.
Hz
2525
2525
2525
2525
100100
100100
200200
200200
Voltage 10 ÷ 50 V • Amplified in d.c. + a.c. 2 wires •
Cable output •
L1 L2 L3L5
LEDd
Housing B-6
L1 L2 L3L5
LEDd
General Features:These sensors are able to work with either direct or alternate current. Voltage dropand residual current are very low. They are not polarized and the load can be con-nected on both the leads. In many applications they can used to replace mechanicalmicroswitches.
Technical data:• Supply voltage (UB): 10 ÷ 50 Vdc/Vac• Electrical system frequency: 40 ÷ 60 Hz • Off-state current (Ir): ≤ 1 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 8 and 12 mm
0,50 mm2 on 18 mm0,75 mm2 on 30 mm
• Protected against short-circuit and overload (versions with letter K)• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
ORDERINGREFERENCES
NOI black
black
B - 6B - 6
B - 3B - 3
CC
GG
••
••
••
••
-5
-7
-10
-15
4035
4336
5848
5035
55
77
1212
1010
--
--
--
--
4545
5050
7070
6060
44
44
55
66
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
AXM8/4600SAXM8/5600S
AXM12/4600KSAXM12/5600KS
AXM18/4600KSAXM18/5600KS
AXM30/4600KSAXM30/5600KS
NCI black
black
AXM8/4610SAXM8/5610S
AXM12/4610KSAXM12/5610KS
AXM18/4610KSAXM18/5610KS
AXM30/4610KSAXM30/5610KS
Housing B-3
d
L1
L5
L2 L3
LED
Housing C
L1 L2 L3
L5
LED
d
Housing G
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing 8 mm: stainless steel• Housing 12 - 18 - 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-53
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
A053 9-02-2007 9:02 Pagina A-53
HzHz
1000800
800600
800400
400200
2525
2525
2525
2525
Max
switc
hing
frequ
ency
( f )
in a
.c.
mA
100100
100100
200200
200200
Rated
ope
ratio
nal
curre
nt ( I
e )
Max
switc
hing
frequ
ency
( f )
in d
.c. ORDERING
REFERENCES
• Supply 10 ÷ 50 V • Amplified in d.c. + a.c.• Connector output M12 x 1
mm mm mm mm mm n° mm mm
NOI 3 blue
4 black
NCI 1 brown
2 white
I - 11I - 11
I - 7I - 7
I - 12I - 12
I - 2I - 2
••
••
••
••
-5
-7
-10
-15
4035
4336
5050
6550
1212
1515
1919
1717
88
88
88
88
6060
6666
7787
9090
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
6 - 8B -106 - 8B -10
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
AXM8/4300SAXM8/5300S
AXM12/4300KSAXM12/5300KS
AXM18/4300KSAXM18/5300KS
AXM30/4300KSAXM30/5300KS
AXM8/4310SAXM8/5310S
AXM12/4310KSAXM12/5310KS
AXM18/4310KSAXM18/5310KS
AXM30/4310KSAXM30/5310KS
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
General Features:These sensors are able to work with either direct or alternate current. Voltage dropand residual current are very low. They are not polarized and the load can be con-nected on both the leads. In many applications they can used to replace mechanicalmicroswitches.
Technical data:• Supply voltage (UB): 10 ÷ 50 Vdc/Vac• Electrical system frequency: 40 ÷ 60 Hz • Off-state current (Ir): ≤ 1 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload (versions with letter K)• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
d
L1
L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-7
Housing I-12
d
L1L5
L2 L3
M12 x 1
L4
4 x LED
3
4
2
1
Housing I-2
d
L1L5
L2 L4
M12 x 1
L3
4 x LED
3
4
2
1
Housing I-11
Materials:• Housing 8 mm: stainless steel• Housing 12 - 18 - 30 mm: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-54
Max
switc
hing
frequ
ency
( f )
in d
.c.
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
1000800
800600
800400
400200
Max
switc
hing
frequ
ency
( f )
in a
.c.
Hz
2525
2525
2525
2525
100100
100100
200200
200200
General Features:These sensors are able to work with either direct or alternate current. Voltage dropand residual current are very low. They are not polarized and the load can be con-nected on both the leads. In many applications they can used to replace mechanicalmicroswitches.
Technical data:• Supply voltage (UB): 20 ÷ 240 Vdc/Vac• Electrical system frequency: 40 ÷ 60 Hz • Off-state current (Ir) at 24 V: ≤ 1 mA • Off-state current (Ir) at 220 V: ≤ 1,5 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 8 and 12 mm
0,50 mm2 on 18 mm0,75 mm2 on 30 mm
• Protected against short-circuit and overload (versions with letter K)• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
L1 L2 L3L5
LEDd
L1 L2 L3L5
LEDd
L1 L2
L5
LED
d
L1 L2 L3
L5
LED
d
Voltage 20 ÷ 240 V • Amplified in d.c. + a.c. 2 wires •
Cable output •
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
ORDERINGREFERENCES
NOI black
black
B - 6B - 6
B - 3B - 3
B - 2B - 2
GG
••
••
••
••
-5
-7
-10
-15
4035
4336
5040
5035
55
77
--
1010
--
--
--
--
4545
5050
5050
6060
3,53,5
44
55
66
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
AX8/4609SAX8/5609S
AX12/4609KSAX12/5609KS
AX18/4A09KSAX18/5A09KS
AX30/4609KSAX30/5609KS
NCI black
black
AX8/4619SAX8/5619S
AX12/4619KSAX12/5619KS
AX18/4A19KSAX18/5A19KS
AX30/4619KSAX30/5619KS
Housing B-6
Housing B-3
Housing B-2
Housing G
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
10 15 35
SW365
80
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing 8 mm: stainless steel• Housing 12 -18 - 30 mm: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-55
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-55
Max
switc
hing
frequ
ency
( f )
in d
.c.
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
800600
800400
400200
Max
switc
hing
frequ
ency
( f )
in a
.c.
Hz
2525
2525
2525
100100
200200
200200
Body
diam
eter
( d )
Fem
ale
conn
ecto
r
• Voltage 20 ÷ 240 V • Amplified in d.c. + a.c.• Connector output M12 x 1
General Features:These sensors are able to work with either direct or alternate current. Voltage dropand residual current are very low. They are not polarized and the load can be con-nected on both the leads. In many applications they can used to replace mechanicalmicroswitches.
Technical data:• Supply voltage (UB): 20 ÷ 240 Vdc/Vac• Electrical system frequency: 40 ÷ 60 Hz • Off-state current (Ir) at 24 V: ≤ 1 mA • Off-state current (Ir) at 220 V: ≤ 1,5 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
ORDERINGREFERENCES
NOI
3 blue2 brown1 yellow-green
A - 7A - 7
A - 1A - 1
A - 2A - 2
••
••
••
-7
-10
-15
4336
5050
6550
1515
1919
1717
88
88
88
6666
7787
9090
n°
17-1817-18
17-1817-18
17-1817-18
24
58
1015
AX12/4009KSAX12/5009KS
AX18/4009KSAX18/5009KS
AX30/4009KSAX30/5009KS
NCI
3 blue2 brown1 yellow-green
AX12/4019KSAX12/5019KS
AX18/4019KSAX18/5019KS
AX30/4019KSAX30/5019KS
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
d
L1L5
L2 L4
LED
M12 x 1
L3
32
1
Housing A-7
d
L1
L5
L2 L4
M12 x 1
L3
LED
32
1
Housing A-1
32
1
d
L1L5
L2 L3
M12 x 1
L4
LED
Housing A-2
Materials:• Housing: nickel plated brass• Sensing face: plastic
Max tightening torque Nm
Nut
M12x 1 M18 x 1 M30 x 1,5Size SW17 SW24 SW36Thickness mm 4 4 5
15 35 80
Diameter
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-56
d
L1
L5
L2 L3
LED
Housing C
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
25252525
252525252525
500500500500
500500500500500500
L1 L2 L3L5
LEDd
Housing B-3
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 12 mm
0,50 mm2 on 18 mm (Housing C)0,75 mm2 on 18 mm (Housing D - 1)
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
L1 L2
L5
LED
d
L1 L2 L3 L4
L5
LEDd
Diameters 12 - 18 mm • Amplified in a.c. 2 wires •
Cable output •
Housing D
Housing B-2
d
L1
L5
L2 L3 L4
LED
Housing D-1
NOI black
black
NCI black
black
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
ORDERINGREFERENCES
B - 3D
B - 3D
CB - 2D - 1B - 2D - 1C
••
••
•••
•••
--77
---
101010
43503643
605060405050
710710
10-
12-
1210
-20-
20
--
20-
20-
50805080
705092509270
4444
556565
M12 x 1M12 x 1M12 x 1M12 x 1
M18 x 1M18 x 1M18 x 1M18 x 1M18 x 1M18 x 1
2244
555888
AC12/4609SAC12/4709SAC12/5609SAC12/5709S
AC18/4609SAC18/4A09SAC18/4709SAC18/5A09SAC18/5709SAC18/5609S
AC12/4619SAC12/4719SAC12/5619SAC12/5719S
AC18/4619SAC18/4A19SAC18/4719SAC18/5A19SAC18/5719SAC18/5619S
Diameter
Max tightening torque Nm
Nut
M12 x 1 M18 x 1Size SW17 SW24Thickness mm 4 4
15 35
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-57
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-57
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
20202020
20
500500500500
500
L1 L2 L3
L5
LED
d
Housing G
d
L1L5
L2 L3 L4
LED
• Diameters 30 - 45 mm• Amplified in a.c. 2 wires• Cable output
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,75 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
ORDERINGREFERENCES
GD - 2G
D - 2
G - 1
••
• •
•
--
1515
-
50653550
50
10101010
10
-20-
20
-
60956095
60
6666
6
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
M45 x 1,5
10101515
20
AC30/4609SAC30/4709SAC30/5609SAC30/5709S
AC45/4609S
AC30/4619SAC30/4719SAC30/5619SAC30/5719S
AC45/4619S
Housing D-2
d
L5L2 L3
LED
Housing G-1
NOI black
black
NCI black
black
Diameter
Max tightening torque Nm
Nut
M30 x 1,5 M45 x 1,5Size SW17Thickness mm 5
80
SW365
70
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
A058 9-02-2007 8:53 Pagina A-58
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
2525
2525
500500
500500
Hz mA
2525
2525
500500
500500
Diameters 12 - 18 mm • Amplified in a.c. •
Connector output M12 x 1 •
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Suppression of initial false impulse• Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
d
L1L5
L2 L4
LED
M12 x 1
L3
3
2
1
3 PIN 4 PIN
32
1
Housing A-7
d
L1L5
L2 L3
M12 x 1
L4
LED
3
2
1
3 PIN 4 PIN
32
1
Housing A-1
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
4 PIN connector
ORDERINGREFERENCES
NOI 1 brown
2 blueyellow-green
NCI 1 brown
2 blueyellow-green
A - 7A - 7
A - 1A - 1
••
••
-7
-10
4336
5050
1515
1919
88
88
6666
7787
15 - 1615 - 16
15 - 1615 - 16
M12 x 1M12 x 1
M18 x 1M18 x 1
24
58
AC12/4109SAC12/5109S
AC18/4109SAC18/5109S
AC12/4119SAC12/5119S
AC18/4119SAC18/5119S
mm mm mm mm mm n° mm mm
3 PIN connector according to EN60947-5-2NO
I 3 blue2 brown1 yellow-green
NCI 3 blue
2 brown1 yellow-green
A - 7A - 7
A - 1A - 1
••
••
-7
-10
4336
5050
1515
1919
88
88
6666
7787
17 - 1817 - 18
17 - 1817 - 18
M12 x 1M12 x 1
M18 x 1M18 x 1
24
58
AC12/4009SAC12/5009S
AC18/4009SAC18/5009S
AC12/4019SAC12/5019S
AC18/4019SAC18/5019S
Materials:• Housing: nickel plated brass• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M12 x 1 M18 x 1Size SW17 SW24Thickness mm 4 4
15 35
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-59
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-59
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
2020
500500
2020
500500
Hz mA
d
L1L5
L2 L3
M12 x 1
L4
LED
3
2
1
3 PIN 4 PIN
32
1
• Diameter 30 mm• Amplified in a.c.• Connector output M12 x 1 Housing A-2
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA a 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
4 PIN connector
ORDERINGREFERENCES
NOI 1 brown
2 blueyellow-green
NCI 1 brown
2 blueyellow-green
A - 2A - 2
••
-15
6550
1717
88
9090
15 - 1615 - 16
M30 x 1,5M30 x 1,5
1015
AC30/4109SAC30/5109S
AC30/4119SAC30/5119S
A - 2A - 2
••
-15
6550
1717
88
9090
17 - 1817 - 18
M30 x 1,5M30 x 1,5
1015
AC30/4009SAC30/5009S
AC30/4019SAC30/5019S
mm mm mm mm mm n° mm mm
3 PIN connector according to EN60947-5-2NO
I 3 blue2 brown1 yellow-green
NCI 3 blue
2 brown1 yellow-green
Materials:• Housing: nickel plated brass• Sensing face: plastic
M30 x 1,5SW36
5
80
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-60
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
25252525
500500500500
2525
500500
Hz mA
d
L1L5
L2 L4
43
LED
1230
d
L1L5
L2 L3
30
L4
LED
d
L1L5
L2 L3
30
LED
Diameter 18 mm • Amplified in a.c. •
Connector output C1 - C2 •
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing M-1
Housing M
Housing M-4
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
ORDERINGREFERENCES
NO13
I
NC13
I
M - 1M - 4M - 1M - 4
• •
••
--
1010
60605050
-40-
40
33133313
9611396113
1111
M18 x 1M18 x 1M18 x 1M18 x 1
5588
AC18/4209SAC18/4409SAC18/5209SAC18/5409S
AC18/4219SAC18/4419SAC18/5219SAC18/5419S
MM
• •
-10
6050
5050
--
110110
22
M18 x 1M18 x 1
58
AC18/4E09SAC18/5E09S
AC18/4E19SAC18/5E19S
mm mm mm mm mm n° mm mm
NO34
I
NC12
I
Materials:• Housing: nickel plated brass• Sensing face and connector: plastic
M18 x 1SW24
4
35
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-61
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-61
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
20202020
20
500500500500
500
2020
20
500500
500
Hz mA
d
L1L5
L2 L3
LED
Housing M-6
d
L1L5
L2 L3
LED
L4
30
Housing M-5
d
L1L5
L2 L3 LEDL4
46
12
30
• Diameters 30 - 45 mm• Amplified in a.c.• Connector output C1 - C2
d
L5L2 L3
LED
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA a 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Housing M-3
Housing M-2
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm n° mm
Nom
inal
sens
ing
dist.
( S n
) ±
10%
mm
ORDERINGREFERENCES
NO13
I
NC13
I
M - 2M - 5M - 2M - 5
M - 2
••
••
•
--
1515
-
65655050
50
10281028
10
40134013
42
115106115106
102
1111
1
M30 x 1,5M30 x 1,5M30 x 1,5M30 x 1,5
M45 x 1,5
10101515
20
AC30/4209SAC30/4409SAC30/5209SAC30/5409S
AC45/4209S
AC30/4219SAC30/4419SAC30/5219SAC30/5419S
AC45/4219S
M - 6M - 6
M - 3
••
•
-15
-
5641
50
5151
28
--
-
107107
78
22
2
M30 x 1,5M30 x 1,5
M45 x 1,5
1015
20
AC30/4E09SAC30/5E09S
AC45/4E09S
AC30/4E19SAC30/5E19S
AC45/4E19S
mm mm mm mm mm n° mm mm
NO34
I
NC12
I
Materials:• Housing: nickel plated brass• Sensing face and connector: plastic
Diameter
Max tightening torque Nm
Nut
M30 x 1,5 M45 x 1,5Size SW36 SW55Thickness mm 5 5
80 70
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-62
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-63
CYLINDRICAL INDUCTIVE SENSORS IN METAL HOUSING
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
2020
2020
250250
250250
d
L1
L5
L2 L3 L4
LED
Housing D-1
ACB SERIES •Amplified in a.c. 3 wires + earth •
Cable output •
d
L1L5
L2 L3 L4
LED
ORDERINGREFERENCES
General Features:These sensors have two wires for power supply and one for the output. They areable to drive very low current loads such as some kind of PLC with A.C. inputs.
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz • No-load supply current (Io): ≤ 4 mA • Minimum operational current (Im): 0,5 mA• Voltage drop (Ud): ≤ 3 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,75 mm2
• Suppression of initial false impulse • Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L4
mm
L5
mm mm
Nom
inal se
nsing
distan
ce ( S
n ) ±
10%
mm
NOI
brownblackblueyellow-green
D - 1D - 1
D - 2D - 2
•
••
-10
-15
6050
6550
1212
1010
2020
2020
9292
9595
mm
66
66
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
58
1015
ACB18/4709SACB18/5709S
ACB30/4709SACB30/5709S
NCI
brownblackblueyellow-green
ACB18/4719SACB18/5719S
ACB30/4719SACB30/5719S
Housing D-2
Diameter
Max tightening torque Nm
Nut
M18 x 1 M30 x 1,5Size SW24 SW36Thickness mm 4 5
35 80
Materials:• Cable: 2 m PVC • Housing: nickel plated brass• Sensing face: plastic
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-63
I brown Rx +blue ---
ORDERINGREFERENCES
L5
d
L5
d
Housing B-14
Housing B-15
• NAMUR SERIES• Non-amplified in d.c. 2 wires• Cable output
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,35 mm2 on 8 and 12 mm
0,75 mm2 on 18 and 30 mm • According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm mm mm mmKHz
Cabl
edi
amete
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
Max
switc
hing
frequ
ency
( f )
B -14B -14
B -15B -15
B -16B -16
B -17B -17
••
••
••
••
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
3030
3030
3030
3535
44
44
55
55
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
53
51
10,5
0,30,2
DC8P/4600DC8P/5600
DC12P/4600DC12P/5600
DC18P/4600DC18P/5600
DC30P/4600DC30P/5600
d
L5Housing B-17
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
1 1 5
SW365
20
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Sensing face: plastic
L5
d
Housing B-16
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-64
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
43
21,5
11
200200
200200
400400
Supp
ly di
al
imen
tazi
one
( UB )
7÷307÷30
5÷405÷40
5÷605÷60
V(min - max)
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA8P/4608KS)
PNP (positive switching)
ORDERINGREFERENCES
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
DCA8P/4609KSDCA8P/5609KS
DCA12P/4609KSDCA12P/5609KS
DCA18P/4609KSDCA18P/5609KS
DCA8P/4619KSDCA8P/5619KS
DCA12P/4619KSDCA12P/5619KS
DCA18P/4619KSDCA18P/5619KS
NO + NC
I blackbrown
whiteblue
+
---
DCA8P/4629KSDCA8P/5629KS
DCA12P/4629KSDCA12P/5629KS
DCA18P/4629KSDCA18P/5629KS
Diameters 8 - 12 - 18 mm •Amplified in d.c. 3 and 4 wires •
Cable output •
L2 L3L5
LEDd
Housing B-18
L2 L3L5
LEDd
Housing B-19
d
L5
L2 L3
Housing C-1
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm
Cabl
edi
amete
r
Body
diam
eter
( d )L2 L3 L5
B -18B -18
B -19B -19
C -1C -1
••
••
••
4040
4242
5050
77
88
1010
4747
5050
6060
3,53,5
44
55
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
mm
1,52,5
24
58
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): on 8 and 12 mm ≤ 1,5 V
on 18 mm ≤ 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,22 mm2 on 8 mm
0,35 mm2 on 12 mm0,50 mm2 on 18 mm
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Sensing face: plastic
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1Size SW13 SW17 SW24Thickness mm 4 4 4
1 1 5
Diameter
NO
Ibrownblackblue ---
+
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-65
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-65
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
0,80,4
0,2
400400
400
• Amplified in d.c. 3 or 4 wires• Diameters 30 - 34 mm• Cable output
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA30P/4608KS)
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
DCA30P/4609KSDCA30P/5609KS
DCA34P/5609LKS
DCA30P/4619KSDCA30P/5619KS
DCA34P/5619LKS
NO + NC
I blackbrown
whiteblue
+
---
DCA30P/4629KSDCA30P/5629KS
DCA34P/5629LKS
L2 L3
L5
d
LED
Housing G-2
L5
LED
d
Housing A-8
Hou
sing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm
Cabl
edi
amete
r
Body
diam
eter
( d )L2 L3 L5
G - 2G - 2
A - 8
••
•
5050
-
1010
-
6060
70
66
6
M30 x 1,5M30 x 1,5
34
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
mm
1015
20
Technical data:• Supply voltage (UB): 7 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section 0,50 mm2
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Sensing face: plastic
Max tightening torque Nm
Nut
M30 x 1,5Size SW36Thickness mm 5
20
Diameter
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-66
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
Supp
ly di
alim
enta
zion
e( U
B )
V (min - max)
7 ÷ 307 ÷ 30
7 ÷ 307 ÷ 30
5 ÷ 405 ÷ 40
7 ÷ 407 ÷ 40
43
21,5
0,80,6
0,80,4
200200
200200
200200
200200
Technical data:• Supply voltage (UB): see ordering references• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,22 mm2 on 8 mm
0,35 mm2 on 12 mm0,50 mm2 on 18 and 30 mm
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
SHORT SERIES •Amplified in d.c. 3 wires •
Cable output •
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Body
diam
eter
( d )L1
mm
L2
mm
L3
mm
L5
mm mm mm
L4
mm
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
mm
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DSA8P/4608KS)
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
B -14B -14
B -15B -15
B -16B -16
B -17B -17
••
••
••
••
--
--
--
--
--
--
--
--
--
--
--
--
3030
3030
3030
3535
--
--
--
--
3,53,5
44
55
66
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
1,52,5
24
58
1015
DSA8P/4609KSDSA8P/5609KS
DSA12P/4609KSDSA12P/5609KS
DSA18P/4609KSDSA18P/5609KS
DSA30P/4609KSDSA30P/5609KS
DSA8P/4619KSDSA8P/5619KS
DSA12P/4619KSDSA12P/5619KS
DSA18P/4619KSDSA18P/5619KS
DSA30P/4619KSDSA30P/5619KS
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: plastic • Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24
4 4 4
1 1 5
SW365
20
L5
LED
d
L5
LED
d
Housing B-14
Housing B-15
d
L5
LED
Housing B-17
L5
LED
d
Housing B-16
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-67
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Thickness mm
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-67
Max
switc
hing
frequ
ency
( f )
KHz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
1
1
400
400
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA18P/4608KSJ)
PNP (positive switching)
ORDERINGREFERENCES
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
DCA18P/4609KSJ
DCA18P/5609KSJ
DCA18P/4619KSJ
DCA18P/5619KSJ
NO + NC
I blackbrown
whiteblue
+
---
DCA18P/4629KSJ
DCA18P/5629KSJ
• Degree of protection IP68• Amplified in d.c. 3 and 4 wires• Cable output
LED
d
L5
L2 L3
Housing J-4
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm
Cabl
edi
amete
r
Body
diam
eter
( d )L2 L3 L5
J - 4
J - 4
•
•
50
50
10
10
60
60
5
5
M18 x 1
M18 x 1
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
mm
5
8
General Features:This new series solves definitively the problem of the ingress of liquids to the innerparts of the sensors. Thanks to the inner hermetic sealing they can be submitted to no-stop jets of liquids under pressure even in presence of temperature changes.They find application in automatic washing machinery, in machines subject to waterjets and in continuous immersion applications.
Technical data:• Supply voltage (UB): 5 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP68• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
M18 x 1SW24
4
5
Diameter
Max tightening torque Nm
NutSizeThickness mm
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Gland: nickel plated brass• Sensing face: plastic
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-68
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-69
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
2525
2525
2525
2525
100100
500500
500500
500500
Amplified in a.c. 2 wires •
Cable output •
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm mm mm
Cabl
edi
amete
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
B -18B -18
B -19B -19
C -1C -1
G - 2G - 2
••
••
••
••
--
--
--
--
4040
4242
5050
5050
77
88
1010
1010
--
--
--
--
4747
5050
6060
6060
44
44
55
66
M8 x 1M8 x 1
M12 x 1M12 x 1
M18 x 1M18 x 1
M30 x 1,5M30 x 1,5
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2 on 8 and 12 mm
0,50 mm2 on 18 mm0,75 mm2 on 30 mm
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
mm
1,52,5
24
58
1015
NOI black
black
NCI black
black
ORDERINGREFERENCES
AC8P/4609SAC8P/5609S
AC12P/4609SAC12P/5609S
AC18P/4609SAC18P/5609S
AC30P/4609SAC30P/5609S
AC8P/4619SAC8P/5619S
AC12P/4619SAC12P/5619S
AC18P/4619SAC18P/5619S
AC30P/4619SAC30P/5619S
L2 L3L5
LEDd
Housing B-18
L2 L3L5
LEDd
Housing B-19
d
L5
L2 L3
LED
Housing C-1
L2 L3
L5
d
LED
Housing G-2
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Sensing face: plastic
Diameter
Max tightening torque Nm
Nut
M8 x 1 M12 x 1 M18 x 1 M30 x 1,5Size SW13 SW17 SW24Thickness mm 4 4 4
1 1 5
SW365
20
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-69
Max
switc
hing
frequ
ency
( f )
Hz
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
25
25
500
500
General Features:This new series solves definitively the problem of the ingress of liquids to the innerparts of the sensors. Thanks to the inner hermetic sealing they can be submitted to no-stop jets of liquids under pressure even in presence of temperature changes.They find application in automatic washing machinery, in machines subject to waterjets and in continuous immersion applications.
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP68• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
• Degree of protection IP68• Amplified in a.c. 2 wires• Cable output
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
mm mm mm mm mm mm mm
Cabl
edi
amete
r
Body
diam
eter
( d )L1 L2 L3 L4 L5
Nom
inal s
ensin
gdis
tance
( S n
) ±10
%
mm
NOI black
black
NCI black
black
ORDERINGREFERENCES
LED
d
L5
L2 L3
Housing J-4
AC18P/4609SJ
AC18P/5609SJ
AC18P/4619SJ
AC18P/5619SJ
J - 4
J - 4
•
•
50
50
-
-
10
10
-
-
60
60
5
5
M18 x 1
M18 x 1
5
8
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Gland: nickel plated brass• Sensing face: plastic
M18 x 1SW24
4
5
Diameter
Max tightening torque Nm
NutSizeThickness mm
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
CYLINDRICAL INDUCTIVE SENSORS IN PLASTIC HOUSING
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-70
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-71
RECTANGULAR INDUCTIVE SENSORS
mm
Nominal sensingdistance ( Sn )± 10%
2
4
Max switchingfrequency
( f )
KHz
I brown Rx +blue ---
mm
ORDERINGREFERENCES
mm
Sensingzone
diameterCable
diameter
Flush
mou
nting
Non
flush
mou
nting
NAMUR SERIES - Type Z •Non-amplified in d.c. 2 wires •
Cable output •
ø 3,12,8
22,5
2,75
3,5
3,1
10,3
16
sensingzone
10
==
6
28
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
General Features:This sensor has the same shape and fixing holes as V3 standard microswitches. Theparticular cable position allows the mounting on every side of the housing.
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,15 mm2
• According to EN 60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX versions see ATEX Catalogue
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: plastic
3
3
9
9
2
1
DCZ/4600
DCZ/5600
•
•
Typical curve
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-71
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
• Type Z• Amplified in d.c. 3 wires• Cable output
ø 3,12,8
22,5
2,75
3,5
3,1
10,3
16
sensingzone
10
==
6
28
3 x LED
General Features:This sensor has the same shape and fixing holes as V3 standard microswitches. Theparticular cable position allows the mounting on every side of the housing. The out-put status is indicated by LED visible from 3 sides.
Technical data:• Supply voltage (UB): 7 ÷ 30 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,15 mm2
• Protected against short-circuit and overload • Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: plastic
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCAZ/4608KS)
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
mm
ORDERINGREFERENCES
mm
3
3
9
9
mm
2
4
Max switchingfrequency
( f )
Nominalsensing
distance ( Sn )± 10%
Sensingzone
diameterCable
diameter
KHz
2
1,5
DCAZ/4609KS
DCAZ/5609KS
Flush
mou
nting
Non
flush
mou
nting
•
•
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
PNP (positive switching)
DCAZ/4619KS
DCAZ/5619KS
Ratedoperationalcurrent ( Ie )
mA
200
200
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-72
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-73
RECTANGULAR INDUCTIVE SENSORS
Type Z •Amplified in d.c. 2 wires non polarized •
Cable output •
ø 3,12,8
22,5
2,75
3,5
3,1
10,3
16
sensingzone
10
==
6
28
3 x LED
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R.• Housing: plastic
mm
ORDERINGREFERENCES
mm
4
4
9
9
mm
2
4
Max switchingfrequency
( f )
Nominalsensing
distance ( Sn )± 10%%
Sensingzone
diameterCable
diameter
KHz
2
1,5
DCMZ/4600KS
DCMZ/5600KS
Flush
mou
nting
Non
flush
mou
nting
•
•
NO
I black
black
NC
I black
black
DCMZ/4610KS
DCMZ/5610KS
Ratedoperationalcurrent ( Ie )
mA
100
100
General Features:These sensors are not polarized and the load can be connected on both posi-tive and negative lead (function PNP or NPN).So they can replace traditional mechanical microswitches in many applica-tions. They have shape and fixing holes as V3 standard microswitches. The particu-lar cable position allows the mounting on every side of the housing. The output statusis indicated by LED visible from 3 sides.
Technical data:• Supply voltage (UB): 10 ÷ 48 Vdc• Max ripple: 10% • Off-state current (Ir): ≤ 1 mA • Minimum operational current (Im): 5 mA• Voltage drop (Ud) con Ie = 10 mA: ≤ 5 V• Voltage drop (Ud) con Ie = 100 mA: ≤ 6 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2
• Protected against short-circuit and overload• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-73
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max switchingfrequency
( f )
KHz
1
0,8
Technical data: • Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V with Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,35 mm2
• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
6,5
18
5,14 3,
1
4
16
25
= =
123240
ø 3,1
I brown Rx +blue ---
• NAMUR SERIES - Type T• Non-amplified in d.c. 2 wires• Cable output
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Flush
mou
nting
Non
flush
mou
nting
mm
ORDERINGREFERENCES
•
•
mm
4
4
9
9
mm
2
4
Nominal sensingdistance ( Sn )± 10%
Sensingzone
diameterCable
diameter
DCT/4700
DCT/5700
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:32 Pagina A-74
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-75
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
1
0,8
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
200
200
Type T •Amplified in d.c. 3 and 4 wires •
Cable output •
Technical data:• Supply voltage (UB): 5 ÷ 40 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 1,5 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,25 mm2 on 4 wires versions
0,35 mm2 on 3 wires versions• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Mon
tagg
io a
filo
Mon
tagg
io sp
orge
nte
Cabl
edi
amete
r
Sens
ing
pzon
edi
amete
r
mm
Nom
inal s
ensin
gdis
tance
( S n
)±10
%
mm
ORDERINGREFERENCES
PNP (positive switching)
•
•
mm
4
4
9
9
2
4
NO
Ibrownblackblue ---
+
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCAT/4708KS)
DCAT/4709KS
DCAT/5709KS
NC
Ibrownblackblue ---
+
DCAT/4719KS
DCAT/5719KS
NO + NC
I blackbrown
whiteblue
+
---
NO
Ibrownblackblue ---
+
NC
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
DCAT/4729KS
DCAT/5729KS
6,5
18
5,14 3,
1
4
16
25
= =
123240
ø 3,1
3 x LED
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic
A075 9-02-2007 8:54 Pagina A-75
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
Hz
25
25
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
500
500
• Type T• Amplified in a.c. 2 wires• Cable output
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA a 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,35 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Sens
ing
pzon
edi
amete
r
mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
ORDERINGREFERENCES
•
•
mm
4
4
9
9
2
4
NOI black
black
ACT/4709S
ACT/5709S
NCI black
black
ACT/4719S
ACT/5719S
6,5
18
5,1
4 3,1
4
16
25
= =
12
3240
ø 3,1
3 x LED
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic
A076 9-02-2007 8:59 Pagina A-76
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-77
RECTANGULAR INDUCTIVE SENSORS
Max switchingfrequency
( f )
KHz
21
0,80,4
Technical data: • Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,75 mm2
• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
ORDERINGREFERENCES
mmmm mm
Nominal sensingdistance ( Sn )± 10%
Sensingzone
diameterCable
diameter
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
sensingzone
25 10
15 4 4
8
7 4,2
7
10
15
50
NAMUR SERIES - Type X and Y •Non-amplified in d.c. 2 wires •
Cable output •Housing N
30 15
19
sensingzone
6
4
20
14,5
50
4,2 8,2
Housing N-2
Hous
ing
Mon
tagg
io a
filo
Mon
tagg
io sp
orge
nte
I brown Rx +blue ---
NN
N - 2N - 2
••
••
55
55
1515
2323
58
1015
DCX/4700DCX/5700
DCY/4700DCY/5700
Materials:
• Cable: 2m PVC - CEI 2022 II- 90°C 300V-O.R.• Housing: plastic
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-77
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
1111
0,80,40,80,4
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
400400400400
400400400400
Cabl
edi
amete
r
mm
55--
55--
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NC
I1 brown4 black3 blue ---
+
NO
I1 brown4 black3 blue ---
+
• Type X and Y• Amplified in d.c. 3 and 4 wires• Cable and connector output M8 x 1
sensingzone
25 10
15 4 4
8
7 4,2
7
10
15
50 LED
Housing N
M8 x 1
LED
Housing N-1
30 15
19
sensingzone
6 4,2
4
8,2
20
14,5
50 LED
Housing N-2
M8 x 1
LED
Housing N-3
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Fem
ale
conn
ecto
r
Sens
ing
zone
diam
eter
mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
ORDERINGREFERENCES
PNP (positive switching)
NN
N - 1N - 1
N - 2N - 2N - 3N - 3
••
••
••
••
n°
--
11-1211-12
--
11-1211-12
15151515
23232323
5858
10151015
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCAX/4608KS)
DCAX/4609KSDCAX/5609KSDCAX/4909KSDCAX/5909KS
DCAY/4609KSDCAY/5609KSDCAY/4909KSDCAY/5909KS
DCAX/4619KSDCAX/5619KSDCAX/4919KSDCAX/5919KS
DCAY/4619KSDCAY/5619KSDCAY/4919KSDCAY/5919KS
NO
I1 brown4 black3 blue ---
+
NC
I1 brown4 black3 blue ---
+
NO + NC
I 4 black1 brown
2 white3 blue
+
---
DCAX/4629KSDCAX/5629KSDCAX/4929KSDCAX/5929KS
DCAY/4629KSDCAY/5629KSDCAY/4929KSDCAY/5929KS
Technical data:• Supply voltage (UB): 5 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 75°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section (cable version): 0,50 mm2
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Connector: nickel plated brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-78
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-79
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
Hz
2020
2020
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
500500
500500
Type X and Y •Amplified in a.c. 2 wires •
Cable output •
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Sens
ing
zone
diam
eter
mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
ORDERINGREFERENCES
NN
N - 2N - 2
••
••
mm
55
55
1515
2323
58
1015
NOI black
black
ACX/4609SACX/5609S
ACY/4609SACY/5609S
NCI black
black
ACX/4619SACX/5619S
ACY/4619SACY/5619S
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA a 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,50 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
sensingzone
25 10
15 4 4
8
7 4,2
7
10
15
50 LED
Housing N
30 15
19
sensingzone
6 4,2
4
8,2
20
14,5
50 LED
Housing N-2
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-79
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max switchingfrequency
( f )
KHz
0,2
0,2
ORDERINGREFERENCES
+ RX 1 342---
Connection diagram
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
112
4560
40 40
Ø 5,3
30 34Pg13,5
7,3
1
2 4
3
• NAMUR SERIES - Type P - 5 Positions head• Non-amplified in d.c.• Terminal block output
General Features:These sensors are called “turnable sensing head” because the sensing head, insidethe plastic housing can be positioned on 5 different positions. To choose the desiredsensing face it is enough to remove the cover and set the sensing head in the properposition.The internal terminal block can be easily reached by removing the transparent cover.The included plastic gland Pg13.5 is suited for cables diameter up to 9 mm.
Technical data: • Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Degree of protection (with fully locked gland): IP65• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Flush
mou
nting
Non
flush
mou
nting
1 Rx +2 ---
I
•
•
Sensing zonediameter
Nominal sensingdistance ( Sn )± 10%
mm
30
30
mm
15
20
DCP/4700
DCP/5700
Materials:
• Housing: plastic • Terminal block cover: polycarbonate
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-80
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-81
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
0,1
0,1
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
400
400
NO + NC
41
23
+
-
I
DCAP/4729KS
DCAP/5729KS
Type P - 5 Positions head •Amplified in d.c. •
Terminal block output •
General Features:These sensors are called “turnable sensing head” because the sensing head, insidethe plastic housing can be positioned on 5 different positions. To choose the desiredsensing face it is enough to remove the cover and set the sensing head in the properposition.The internal terminal block can be easily reached by removing the transparent cover.The included plastic gland Pg13.5 is suited for cables diameter up to 9 mm.
Technical data:• Supply voltage (UB): 10 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection (with fully locked gland): IP65• Indications: output n.o. yellow LED
output n.c. red LEDpower green LED
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Flush
mou
nting
Non
flush
mou
nting ORDERING
REFERENCES
PNP
•
•
Sens
ing
zone
diam
eter
mm
30
30
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
15
20
NO + NC
41
23
+
-
I
DCAP/4728KS
DCAP/5728KS
NPN
112
4560
40 40
Ø 5,3
30 34Pg13,5
7,3
1
2 4
3
LED power
-
NC
LED NC
342
1+
NO
LED NO
Connection diagram
Materials:
• Housing: plastic • Terminal block cover: polycarbonate
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-81
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
Hz
25
25
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
500
500
NO3
4
I
• Type P - 5 Positions head• Amplified in a.c.• Terminal block output
General Features:These sensors are called “turnable sensing head” because the sensing head, insidethe plastic housing can be positioned on 5 different positions. To choose the desiredsensing face it is enough to remove the cover and set the sensing head in the properposition.The internal terminal block can be easily reached by removing the transparent cover.The included plastic gland Pg13.5 is suited for cables diameter up to 9 mm.
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤ 1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Switching hysteresis (H): 10%• Degree of protection (with fully locked gland): IP65• Switch status indicator: yellow LED• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Flush
mou
nting
Non
flush
mou
nting ORDERING
REFERENCES
•
•
Sens
ing
zone
diam
eter
mm
30
30
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
15
20
ACP/4709S
ACP/5709S
NC1
2
I
ACP/4719S
ACP/5719S
112
4560
40 40
Ø 5,3
30 34Pg13,5
7,3
1
2 4
3
LOADNC
LED output
LOADNO4
321
Materials:
• Housing: plastic • Terminal block cover: plycarbonate
Connection diagram
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-82
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-83
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
0,5
0,5
I 1 brown Rx +3 blue ---
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
80
6580
5,5
65
45
5,515
sensing zone
NAMUR SERIES - diameter 80 mm •Non-amplified in d.c. 2 wires •
Cable and connector output M12 x 1 •Housing P
80
6580
5,5
65
45
5,5
M12 x 1
15
sensing zone
Housing P-1
Technical data: • Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section (cable version): 0,75 mm2
• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Sens
ing
zone
dia
mete
r
mm
ORDERINGREFERENCES
P
P - 1
•
•
Cabl
edi
amete
r
mm
5
-
Fem
ale
conn
ecto
r
n°
-
6 - 8B - 10
80
80
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
40
40
DC80B/5800
DC80B/5300
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Connector: nickel plated brass
Catalogo BDC ENG 3 (A47-A90) 4-06-2007 11:45 Pagina A-83
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
0,5
0,5
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
400
400
• Diameter 80 mm• Amplified in d.c. 3 and 4 wires• Cable and connector output M12 x 1
Technical data:• Supply voltage (UB): 10 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section (cable version): 0,50 mm2
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Fem
ale
conn
ecto
r
n°
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
ORDERINGREFERENCES
PNP (positive switching)
P
P - 1
•
•
mm
6
-
-
6 - 8B - 10
Sens
ing
zone
diam
eter
mm
80
80
40
40
NO
I1 brown4 black3 blue ---
+
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCA80B/5808KS)
DCA80B/5809KS
DCA80B/5309KS
NO + NC
I 4 black1 brown
2 white3 blue
+
---
DCA80B/5829KS
DCA80B/5329KS
80
6580
5,5
65
45
5,515
sensing zone
LED
Housing P
80
65
80
5,5
65
45
5,5
M12 x 1
15
sensing zone
4 x LED
Housing P-1
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the whitewire.
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the white wire.
DCA80B/5819KS
DCA80B/53C9KS
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Connector: nickel plated brass
Catalogo BDC ENG 3 (A47-A90) 4-06-2007 11:45 Pagina A-84
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-85
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
Hz
15
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
500
Hz
15
mA
500
Hz
15
mA
500
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section (cable version): 0,75 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Diameter 80 mm •Amplified in a.c. 2 wires •
Cable and connector output M12 x 1 •
80
6580
5,5
65
45
5,515
sensing zone
LED
Housing P
80
65
80
5,5
65
45
5,5
M12 x 1
15
sensing zone
LED
Housing P-1
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Fem
ale
conn
ecto
r
n°
Sens
ing
zone
dia
mete
r
mm
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
ORDERINGREFERENCES
Cable output
P •
mm
6 - 80 40
NOI black
black
AC80B/5809S
NCI black
black
AC80B/5819S
n° mm mm
4 PIN connector
P - 1 •
mm
- 15 - 16 80 40
NOI 1 brown
2 blue
AC80B/5109S
NCI 1 brown
2 blue
AC80B/5119S
n° mm mm
3 PIN connector according to EN60947-5-2
P - 1 •
mm
- 17 - 18 80 40
NOI 3 blue
2 brown
AC80B/5009S
NCI 3 blue
2 brown
AC80B/5019S
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Connector: nickel plated brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-85
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
0,3
0,3
ORDERINGREFERENCES
• NAMUR SERIES - Type R - Adjustable sensing distance• Non-amplified in d.c. 2 wires• Cable and connector output M12 x 1
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
59
100
83
65
111
20
30
sensingzone
ø 6,4
Potentiometer
- +
Housing R-1
59
100
83
65
111
20
30 M12 x1
sensingzone
ø 6,4
Potentiometer
- +
Housing R-2
General Features:These sensors are suitable for non flush mounting and have the adjustable sensingdistance turning a multiturn potentiometer.
Technical data:• Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 4%• Degree of protection: IP65• Cable conductor cross section (cable version): 0,75 mm2
• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Sens
ing
zone
diam
eter
mm
I 1 brown Rx +3 blue ---
R - 1
R - 2
•
•
Cabl
edi
amete
r
mm
5
-
Fem
ale
conn
ecto
r
n°
-
6 - 8B - 10
75
75
Dista
nza
nom
inal
edi
int.
( Sn )
mm
10 ÷ 55
10 ÷ 55
DCR/5800
DCR/5300
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic• Connector: nickel plated brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-86
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-87
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
KHz
0,3
0,3
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
400
400
General Features:These sensors are suitable for non flush mounting and have the adjustable sensingdistance turning a multiturn potentiometer.
Technical data:• Supply voltage (UB): 10 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Cable conductor cross section (cable version): 0,50 mm2
• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
Type R - Adjustable sensing distance •Amplified in d.c. 3 and 4 wires •
Cable and connector output M12 x 1 •
59100
83
65
111
20
30
sensingzone
ø 6,4
Potentiometer output LED
- +
Housing R-1
59
100
83
65
111
20
30
M12 x1
sensingzone
ø 6,4
4 x LEDPotentiometer
- +
Housing R-2
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Fem
ale
conn
ecto
r
n°
Nom
inal
sens
ing
dista
nce
( Sn )
±10
%
mm
ORDERINGREFERENCES
PNP (positive switching)
R - 1
R - 2
•
•
mm
6
-
-
6 - 8B - 10
Sens
ing
zone
diam
eter
mm
75
75
10 ÷ 55
10 ÷ 55
NO
I1 brown4 black3 blue ---
+
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie DCAR/5808KS)
DCAR/5809KS
DCAR/5309KS
NO + NC
I 4 black1 brown
2 white3 blue
+
---
DCAR/5829KS
DCAR/5329KS
NO
I1 brown4 black3 blue ---
+
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the whitewire.
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NC
I1 brown2 black (*)3 blue
-
+
(*) Note: In versions withconnector use the white wire.
DCAR/5819KS
DCAR/53C9KS
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Connector: nickel plated brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-87
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
RECTANGULAR INDUCTIVE SENSORS
Max
switc
hing
frequ
ency
( f )
Hz
20
Rated
ope
ratio
nal
curre
nt ( I
e )
mA
500
Hz
20
mA
500
Hz
20
mA
500
• Type R - Adjustable sensing distance• Amplified in a.c. 2 wires• Cable and connector output M12 x 1
59
100
83
65
111
20
30
sensingzone
ø 6,4
Potentiometer output LED
- +
Housing R-1
59
100
83
65
111
20
30 M12 x1
sensingzone
ø 6,4
Potentiometer output LED
- +
Housing R-2
General Features:These sensors are suitable for non flush mounting and have the adjustable sensingdistance turning a multiturn potentiometer.
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 20° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP65• Switch status indicator: yellow LED• Cable conductor cross section (cable version): 0,75 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Hous
ing
Flush
mou
nting
Non
flush
mou
nting
Cabl
edi
amete
r
Fem
ale
conn
ecto
r
n°
Sens
ing
zone
dia
mete
r
mm
Dista
nza
nom
.di
int.
( Sn )
mm
ORDERINGREFERENCES
Cable output
R - 1 •
mm
6 - 75 10 ÷ 55
NOI black
black
ACR/5809S
NCI black
black
ACR/5819S
n° mm mm
4 PIN connector
R - 2 •
mm
- 15 - 16 75 10 ÷ 55
NOI 1 brown
2 blue
ACR/5109S
NCI 1 brown
2 blue
ACR/5119S
n° mm mm
3 PIN connector according to EN60947-5-2
R - 2 •
mm
- 17 - 18 75 10 ÷ 55
NOI 3 blue
2 brown
ACR/5009S
NCI 3 blue
2 brown
ACR/5019S
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Connector: nickel plated brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-88
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-89
INDUCTIVE SLOT SENSORS
Technical data: • Working voltage: 5 ÷ 30 Vdc• Supply voltage according to NAMUR: 7,7 ÷ 9 Vdc• Max ripple: 10%• Consumption at 8,2 V con Rx = 1000 Ω
with metal: ≤ 1 mAwithout metal: ≥ 3 mA
• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Degree of protection: IP67• Cable conductor cross section: 0,15 mm2 on DF3,5/… and DF5/…
0,75 mm2 on DF6/…, DF15/… and DF30/…• According to EN60947-5-6• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6• For certified ATEX version see ATEX Catalogue
ORDERINGREFERENCES
Housing
NAMUR SERIES •Non-amplified in d.c. 2 wires •
Cable output •
2430
24
24
4440
50 30 80
Ø 6
,510
9 6,5
3,55
319
ø2 3
11 8
55
10
8,5 5,55
5319
ø2 311 8
55
10,6 10,65
29,5
9,8
30,51912
Ø 3,5
8
1316,5
15,5
6
24
KHzI brown Rx +
blue ---
U
Q
S
T
V
mm
3,5
5
5
15
30
mm
3
3
5
5
5
3
3
1
0,8
0,3
Minimumpenetration
Max switchingfrequency
( f )Gapwidth
Cablediameter
mm
55
9
16
30
DF3,5/4600
DF5/4600
DF6/4600
DF15/4600
DF30/4600
Housing V
15,51515,5
24,5 24,5
Ø 5
41
173018
Housing S
Sn (switching point)D (mm)with metal
1,55mA1,75mA
I(mA)
without metal4
3
2
1
0
Δd
ΔI
Typical curve
Housing U Housing Q
Housing T
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Screw and nut (included on DF3,5… and DF5…) brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-89
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
INDUCTIVE SLOT SENSORS
Rated
oper
atio
nal
curre
nt ( I
e )
mA
200
200
400400
400400
105
35
5
30,5
Ø 2
21 63,52 xLED
22,5 8
3
105
35
5
30,5
Ø 2
20 5 5,5
22,5 83
2 xLED
• Amplified in d.c. 3 and 4 wires• Cable outputHousing Z Housing R
Technical data:• Supply voltage(UB) tipi DCF3,5/… and DCF5/… 10 ÷ 30 Vdc• Supply voltage (UB) tipi DCF15/… and DCF30/… 10 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section
0,22 mm2 on DCF3,5/… and DCF5/…0,50 mm2 on DCF15/… and DCF30/…
• Protected against short-circuit and overload (versions with letter K)• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCF3,5/4608KS)
NO + NC
I blackbrown
whiteblue
+
---
NC
Ibrownblackblue ---
+
Hous
ing
Cabl
edi
amete
r
Gap
wid
th
mm
Min
imum
pene
tratio
n
mm
Max
switc
hing
frequ
ency
( f )
KHz
ORDERING REFERENCES
NO
Ibrownblackblue ---
+
NO + NC
I blackbrown
whiteblue
+
---
NC
Ibrownblackblue ---
+
NO
Ibrownblackblue ---
+
PNP (positive switching)
Z
R
TT - 1
VV - 1
mm
3,5
3,5
66
66
3,5
5
1515
3030
5
5
1616
3030
1
1
0,50,5
0,20,2
DCF3,5/4609KS
DCF5/4609KS
DCF15/4609KSDCF15/4L09KS
DCF30/4609KSDCF30/4L09KS
DCF3,5/4619KS
DCF5/4619KS
DCF15/4619KSDCF15/4L19KS
DCF30/4619KSDCF30/4L19KS
DCF3,5/4629KS
DCF5/4629KS
DCF15/4629KSDCF15/4L29KS
DCF30/4629KSDCF30/4L29KS
24,5 24,5
Ø 5 LEDoutput
LEDpower
173041
18
15,5 15 15,515,5 15 15,5
24,524,5
Ø 5
41
173018
LEDoutput
LEDpower
24 30 24
24
4440
5030
80
Ø 6,5LED
power
LEDoutput
24 30 24
24
4440
5030
80
Ø 6,5
LEDpower
LEDoutput
Housing T Housing T -1
Housing V Housing V -1
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic • Screw and nut
(included on mod. DF3,5… and DF5…) brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-90
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected] A-91
INDUCTIVE SLOT SENSORS
Rated
oper
atio
nal
curre
nt ( I
e )
mA
400
400
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NC
I1 brown2 white3 blue ---
+
Hous
ing
Fem
ale
conn
ecto
r
Gap
wid
th
mm
Min
imum
pene
tratio
n
mm
Max
switc
hing
frequ
ency
( f )
KHz
ORDERING REFERENCES
NO
I1 brown4 black3 blue ---
+
PNP (positive switching)
n°
Amplified in d.c. •Connector output M12 x 1 •
NPN (negative switching)Use the above mentioned part number changing the last number 9 with 8 (ie. DCF15/4308KS)
X
Y
6 - 8B - 10
6 - 8B - 10
15
30
16
30
0,5
0,2
DCF15/4309KS
DCF30/4309KS
DCF15/43C9KS
DCF30/43C9KS
DCF15/4329KS
DCF30/4329KS
15,5 15 15,51730
4118 15
Ø 5LEDoutput
24,5 24,5
Housing X
M12x1
15
24 30 24
8030
40 44
50 24
LEDoutput
ø 6,5
Housing Y
Technical data:• Supply voltage (UB): 10 ÷ 60 Vdc• Max ripple: 10%• No-load supply current (Io): ≤ 10 mA• Voltage drop (Ud): ≤ 2,2 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection con connettori costampati: IP67• Switch status indicator: yellow LED• Protected against short-circuit and overload• Protected against any wrong connection• Suppression of initial false impulse• Electromagnetic compatibility (EMC) according to EN60947-5-2 • Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
NO + NC
I 4 black1 brown
2 white3 blue
+
---
NC
I1 brown2 white3 blue ---
+
NO
I1 brown4 black3 blue ---
+
Materials:• Housing: plastic• Connector: nickel plated brass
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-91
BDC Electronic - Viale Lidice, 37/39 - 10095 Grugliasco (To) - Italy -Tel. (+39)011.31.49.021/022 Fax (+39) 011.31.49.023 - www.bdcelectronic.com - E-mail:[email protected]
INDUCTIVE SLOT SENSORS
mA
Rated
ope
ratio
nal
curre
nt ( I
e )
500
500
• Amplified in a.c. 2 wires• Cable output
Hous
ing
Cabl
edi
amete
r
Gap
wid
th
Min
imum
pene
tratio
n
mm
Max
switc
hing
frequ
ency
( f )
mmHz
ORDERINGREFERENCES
T
V
mm
6
6
15
30
16
30
15
15
NOI black
black
NCI black
black
ACF15/4609S
ACF30/4609S
ACF15/4619S
ACF30/4619S
15,5 15 15,5
24,524,5
Ø 5
41
LEDoutput
173018
Housing T
24 30 24
24
4440
5030
80
Ø 6,5
LEDoutput
Housing V
Technical data:• Supply voltage (UB): 20 ÷ 240 Vac• Electrical system frequency: 40 ÷ 60 Hz• Off-state current (Ir): ≤1,5 mA at 110 Vac• Minimum operational current (Im): 5 mA• Voltage drop (Ud): ≤ 5 V• Temperature range: - 25° ÷ + 70°C• Max thermal drift of sensing distance Sr: ± 10%• Repeat accuracy (R): 2%• Switching hysteresis (H): 10%• Degree of protection: IP67• Switch status indicator: yellow LED• Cable conductor cross section: 0,75 mm2
• Suppression of initial false impulse• Class 2 equipment according to IEC 536 • Shock and vibration according to EN60068-2-27 EN60068-2-6• Electromagnetic compatibility (EMC) according to EN60947-5-2
Materials:• Cable: 2 m PVC CEI 20 - 22 II; 90°C; 300 V; O.R. • Housing: plastic
Catalogo Inglese 3 (A45-A90) Ok 23-01-2007 13:33 Pagina A-92