e-Urja Oracle 11i End to End Implementation
CRM Standard Operating Procedures
Gujarat Urja Vikas Nigam Limited
Version 1.1April 2012
CRM – Standard Operating Procedures DISCOM
Statement of Confidentiality
This is a controlled document. Unauthorised access, copying, replication or usage for a purpose other than for which it is intended, are prohibited.
All trademarks that appear in the document have been used for identification purposes only and belong to their respective companies.
Confidential 2
CRM – Standard Operating Procedures DISCOM
Document Revision ListCustomer: Gujarat Urja Vikas Nigam Limited
Project: e-Urja Oracle 11i End to End Implementation
Release Notice Reference (for release)
Revision number
Revision date
Revision description
Page
number
Previous page number
Action taken
Addenda/New page
Release notice
reference
1.1 Apr-12 Incorporated changes for support phase
Confidential 3
CRM – Standard Operating Procedures DISCOM
Abbreviation and AcronymsAbbreviation Description(B) Button(M) MenuMGVCL Madhya Gujarat Vij Company LimitedPGVCL Pachim Gujarat Vij Company LimitedDGVCL Dakshin Gujarat Vij Company LimitedDGVCL Uttar Gujarat Vij Company LimitedOracle Apps or Apps Oracle Applications TCS Tata Consultancy ServicesSDO Sub Division OfficeDO Division OfficeCO Circle OfficeHO Corporate OfficeJE Junior EngineerDE Deputy EngineerEE Executive EngineerDFF Descriptive Flex FieldLOV List of ValuesTS Technical SanctionMR Material Requisition/Move OrderSub WO Sub Work OrderWO Work OrderSR Service RequestDOP Delegation of Power
Confidential 4
CRM – Standard Operating Procedures DISCOM
Table of Contents
NEW CONNECTION LT 10
SOP: CRM 01: CONTACT CENTER 10
SOP: CRM 02: CREATE SERVICE REQUEST 12
SOP: CRM 03: CREATING A TASKS 13
SOP: CRM 04: APPLICATION ENTRY 15
SOP: CRM 05: DOCUMENT DETAILS 17
SOP: CRM 06: REGISTRATION CHARGES FOR NEW CONNECTION 18
SOP: CRM 07: COLLECTION OF REGISTRATION CHARGES 19
SOP: CRM 08: SITE SURVEY 22
SOP: CRM 09: PREPARE ESTIMATE 24
GROUP CONNECTION IND/LIGHTING 26
SOP: CRM 10: CONTACT CENTER 26
SOP: CRM 11: CREATE SERVICE REQUEST 27
SOP: CRM 12: CREATING A TASKS 28
SOP: CRM 13: GROUP COMBINE 29
SOP: CRM 14: ESTIMATE APPROVAL 30
NEW CONNECTION LT 31
SOP: CRM 15: FIRM QUOTATION31
SOP: CRM 16: COLLECTION OF FIRM QUOTATION AMOUNT 32
GROUP CONNECTION IND/LIGHTING 35
Confidential 5
CRM – Standard Operating Procedures DISCOM
SOP: CRM 17: MATERIAL REQUISTION 35
SOP: CRM 18: SUB WORK ORDER CREATION 38
SOP: CRM 19: APPROVING SUB WORK ORDER 39
SOP: CRM 20: INSTALL 40
SOP: CRM 21: INTIMATION 41
SOP: CRM 22: MATERIAL RETURN 42
SOP: CRM 23: RECEIPT OF THE SERVICE ITEMS 44
SOP: CRM 24: RECEVING TRANSACTION OF THE SERVICE ITEMS 45
SOP: CRM 25: SITE INSPECTION 46
SOP: CRM 26: COLLECTION OF BILL FINALIZATION AMOUNT 48
NEW CONNECTION LT 51
SOP: CRM 27: AGREEMENT (Only For LT Industrial Group Connection with 51
Lighting-Industrial task template) 51
SOP: CRM 28: SUBMIT 52
SOP: CRM 29: INFORM TO CUSTOMER 53
SOP: CRM 30: TEST REPORT CHARGES 54
SOP: CRM 31: COLLECTION OF TEST REPORT CHARGES 55
SOP: CRM 32: METER ISSUE 58
SOP: CRM 33: RELEASE CONNECTION 59
SOP: CRM 34: ACCOUNT GENERATION 60
SOP: CRM 35: CHECK 61
SOP: CRM 36: LT CONSUMER FORM 62
SOP: CRM 37: CLOSING SERVICE REQUEST 63Confidential 6
CRM – Standard Operating Procedures DISCOM
GROUP CONNECTION IND/LIGHTING 64
SOP: CRM 38: CLOSING SERVICE REQUEST 64
Confidential 7
CRM – Standard Operating Procedures DISCOM
NEW CONNECTION LT
SOP: CRM 01: CONTACT CENTER
Purpose
Contact Center is used to record Consumer Information master which will be attached with him till he is associated with that company. Information which are captured in Contact Center are Name, Phone No, Email and Address of an Consumer. Once it is created in the system, user can enter other details of Addresses, Contact Points etc.
Scope
This is a Consumer Master which will contains information about Name, Phone No, Email and Address of an Consumer. On Dashboard user will be able to see the complete information about the consumer like Applied Load, Connected Load, Class, Category, Phase, Meter Information, LT & HT and TC details with Open Work Orders, Billing Information etc.
Responsibility
At
Sub Division : JE
Input
Consumer Type as Person/Organization If Person then First Name, Middle Name, Last Name. If Organization then name of
the Organization Land Survey No, Building Type, Plot No, Block No, Flat No, Area Type, Area Code,
Sub Area Code, Description of Premises Address1, Address2, Address3, State, District, Taluka, City, Postal Code, Village
Census Code.
Navigation
Navigation Path: eUrja: Customer Support User Customer Management Contact Center
Procedure
LT Consumer are registered at Sub Division Office Click on the ‘Create’ Button available on the right side of the ‘Contact Center’ form.
This will open a new form ‘Create Customer’. Select the Type of the Prospective Consumer. It could be person or an organization. Enter the name of Person or the Organization. Click on the DFF to open the new form of ‘Party Information’ and add the relevant
information. Village/Area Code and Village/Area Sub Code will have to be selected from List of Values (LOV) which will be used for generation of. Permanent Consumer Number. After entering the details, click on “Ok” button.
Confidential 8
CRM – Standard Operating Procedures DISCOM
Add other information in the “Create Customer” form like Phone, email etc. Click on Address Details button to open a form for the address entry and add
Address1, Address2, Address3, State, District, Taluka, City, Postal Code, and Village Census Code.
After entering all the details, click on “Save” button. System will generate a unique number for that particular customer.
Output
A Temporary Consumer will be created in the system with Temporary Consumer Number/Account Number.
Confidential 9
CRM – Standard Operating Procedures DISCOM
SOP: CRM 02: CREATE SERVICE REQUEST
Purpose
Service Request is created to register a request of a consumer. For one consumer we can register one service request at a time.
Scope
Once the Service Request is generated, it will be generate the unique number which will be given to the consumer for future reference. It will be used for tracking the consumer request.
Responsibility
Sub Division : JE
Input
Consumer Name Service Request Type
Navigation
Navigation Path: eUrja: Customer Support User Service Requests > Create Service Request
Procedure
Select the consumer name from the LOV against the Consumer Name field which will automatically populate the number.
In this process, two child SRs of type ‘New Connection LT’ is to be created. One SR will be of Industrial category and other will be of Commercial category.
Select the Service Request Type as ‘New Connection LT’ from the LOV against the SR type field
After entering all the details, click on “Save” button. System will generate a unique Service Request Number.
Output
Service Request is generated for the Consumer Request. For one consumer we can register one service request at a time. This SR Number will be used to track the request of the consumer in future.
Confidential 10
CRM – Standard Operating Procedures DISCOM
SOP: CRM 03: CREATING A TASKS
Purpose
Tasks are the steps which will be required to be followed for the completion of that particular Request. User will have to follow one task after another task. For e.g. A1 Application entry is done then Registration charges task will come.
Scope
Once the task is created, users will have to follow the tasks step by step. User will not be allowed to go ahead unless and until last task is closed. In system user can create the task manually or can create a template which consists of various task which will be required to be followed for the completion of that Service Request. Once the entire tasks are closed, we can close the SR which means consumer request is closed.
Responsibility
Sub Division : JE
Input
Task Template Selection
Navigation
Navigation Path: eUrja: Customer Support User Service Requests > Create Service Request
Procedure
In Service Request form, go to Tasks tab. Click on Use Template button to select the template. This will open the ‘Create Tasks
from Template Group’ form. Select ‘LT Industrial Group Connection with lighting-Industrial’ task template
from the LOV against the Template Group for SR which will be of Industrial category. Select ‘LT Industrial Group Connection with lighting-Commercial’ task template
from the LOV against the Template Group for SR which will be of Commercial category.
Once you select template as Group Connection Process for a Industrial/Lightening for New Connection template and click on the ‘Create Tasks’ it will populate the entire tasks predefined for ‘Group Connection Process for a Industrial/Lightening for New Connection’.
Output
It will populate the entire tasks predefined for ‘Industrial Group Connection with lighting-Industrial’ and ‘LT Industrial Group Connection with lighting-Commercial’ task templates.
Confidential 11
CRM – Standard Operating Procedures DISCOM
SOP: CRM 04: APPLICATION ENTRY
Purpose
This form will be used to capture Class, Consumer Category, Phase, Schemes, Usage, Project Name, GPR/PPR category, proposed tariff, Industry Type, Combination Code, Cost Sheet Source, Appliance Name and Appliance Qty. This form will display total cooling load, heating load, lighting load and total load.
Scope
Filling of the A1 Application form as per the manual application form submitted by the consumer
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Consumer Category Usage Remarks Scheme Project Name GPR/PPR Category Proposed Tariff Combination Code Cost Sheet Source Appliance Details
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Application Entry’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Application Entry task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Consumer Appliance Form’ (A1
Application Form) Select the below mandatory information in the ‘Consumer Information Header’.
a. Consumer Categoryb. Usagec. Remarksd. Schemee. Project Namef. GPR/PPR Categoryg. Proposed Tariff
Confidential 12
CRM – Standard Operating Procedures DISCOM
h. Combination Codei. Cost Sheet Source
Select Load Name from the List of Values from Load Details and enter the Qty. Total Value will get automatically displayed once we click on Tab button.
Click on “Save” button, which will display the Lighting, Cooling, Heating and Total Load in Document Type Details.
Once all the detail has been entered click on “Close Task” button, to close the task of application entry. System will ask user about closing of the task. User will have to press Yes, No or Cancel button. If user presses Yes, then form will get closed and task will also get closed. If user presses No, then form will get closed and task will remain open. If user presses Cancel, then it will remain in the same form
Output
Data related to the consumer like Class, Category, etc will be captured in this form which will be used for further processing. Form and task will get closed.
SOP: CRM 05: DOCUMENT DETAILS
Purpose
Documents Checklist form is used to capture the documents which consumer has submitted with A1 Application form.
Scope
Confidential 13
CRM – Standard Operating Procedures DISCOM
To check the Documents submitted by the consumer
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Document Type Status Remark
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Document Details’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Document Details task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Document Checklist’. Select the Document Type from the List of Values. Select the Status whether which is used for checking whether some of the mandatory
document has been submitted or not. If submitted click on check box which will put a tick mark. If No then do not select the check box.
Remark is used for writing a comments of the users Click on “Save” button, which will save the data. Once all the detail has been entered click on “Close Task” button, to close the task
of Document Details. If user presses Yes, then form will get closed and task will also get closed. If user presses No, then form will get closed and task will remain open. If user presses Cancel, then it will remain in the same form
Output
Documents which are submitted with manual application form will get verified & checked and saved in the system. Form and task will get closed.
SOP: CRM 06: REGISTRATION CHARGES FOR NEW CONNECTION
Purpose
To take the registration charges for new connection from the consumer
Scope
Registration charges for new connection will be taken from the consumer
Responsibility
Sub Division : JEConfidential 14
CRM – Standard Operating Procedures DISCOM
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Registration Charges for New Connection’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Registration Charges for New Connection’ task in Task tab.
Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Charge Details’ form. It will display the
amount to be recovered from the consumer for the registration charges for the new connection.
Click on ‘Save’ button to save the data. Go to View menu and select the Request and run a report e-Urja – Application
Entry and issue it to the consumer. Enter the SR Number and Document Type in the parameters.
Take a printout of the report and issue a copy of it to the Consumer.
Output
It will display the amount of registration charges to be taken for the new connection.
SOP: CRM 07: COLLECTION OF REGISTRATION CHARGES
Purpose
To collect the registration charges for new connection from the consumer this was displayed at the time of registering of the application form.
Scope
Collection of the registration charges for new connection from the consumer
Responsibility
Sub Division : Cashier
InputConfidential 15
CRM – Standard Operating Procedures DISCOM
Receipt Type Payment Method Cash/Instrument No. Receipt Amount Activity Receipt Information in DFF SR No in DFF
Navigation
Navigation Path: Indian Local Receivables Receipts Receipts
Procedure
Select Receipt Type as Miscellaneous Select Payment Method as Cash Receipt. Enter Cash/Instrument No. This field is used for entering details of cash and cheque. Enter Receipt Amount. Click on Descriptive Flex Field which will open a new window of Receipt Information.
Select Transaction Name from List of Values as Reg Charges for New Connection. Select the Service request Number from List of Values. Click on the Full Amount. If amount entered in Receipt Amount does not match with the standard registration charges for the new connection amount then system will not accept the amount. If it matches, then system will put the value as ‘Y’.
Against the activity field in the Purpose region, select ‘Reg Charges for New Connection’ from the LOV
Click on ‘Save’ button to save the data.
Output
System will generate Document Number which is a Money Receipt Number. It is visible in the ‘More’ tab of the Receipt form.
Workflow notification will get launch to inform the SR Owner Task of ‘Reg charges for new connection’ will get closed GPR No will get generated
Workflow Notification
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Workflow notification.
Responsibility
Sub Division : JE
Procedure
Confidential 16
CRM – Standard Operating Procedures DISCOM
Then select the where user will see the subject line as “Payment Against "Reg Charges for New Connection" for SR number "<SR Number>" has been received”. Once you click on the notification you will see the notification containing information about the payment made by the consumer.
Output
Workflow notification will display the information about the payment received from the consumer for registration charges for new connection.
Find Service Request
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Responsibility
Sub Division : JE
Input
Service Request Number
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Once the Service Request is open, click on ‘Receipts’ tab which will open a form
Receipt window which will display information about the payment made by the consumer. GPR number will also get generated by the system which will also get viewed in this form.
Output
Receipt Information with GPR Number can be viewed by the user. Task of ‘Reg charges for new connection’ will get closed
Confidential 17
CRM – Standard Operating Procedures DISCOM
SOP: CRM 08: SITE SURVEY
Purpose
To enter the site survey details like Transformer, Feeder, Sub Station, LT & HT Line details.
Scope
To capture the actual site survey information about the site where connection needs to be provided.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Survey Category Length of LT Line Length of HT Line Area Code Sub Area Code Transformer Details Feeder Details Sub Station Details
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Site Survey’ Click ‘Task Dtls’ tabConfidential 18
CRM – Standard Operating Procedures DISCOM
Procedure
Select the task i.e. the Site Survey task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Check list for Site Survey’ form. Select the Survey Category from LOV. Survey category are A,B,C and D Select the Area Code which is mandatory for generation of Account
Number/Consumer Number. It will get populated if user had entered the data at the time of creation of the Consumer.
Select the Sub Area Code which is mandatory for generation of Account Number/Consumer Number. It will get populated if user had entered the data at the time of creation of the Consumer.
Manually enter the Length of LT Line Manually enter the Length of HT Line Enter the Transformer, Feeder and Sub Station details in Distribution Transformer,
Feeder Details and Sub Station Details respectively. Select value in Approval Workflow type field. By default it will be “Normal”, this is
for the Normal lighting connection and it will follow standard DOP. In case of Farm house connection, select “Farmhouse” here so that the DOP will be followed accordingly. Same way select “Underground cable” if Underground cable is to be used for providing the connection.
Click on ‘Save’ button to save the data. Once all the detail has been entered click on “Close Task” button, to close the task
of Document Details. If user presses Yes, then form will get closed and task will also get closed. If user presses No, then form will get closed and task will remain open. If user presses Cancel, then it will remain in the same form.
Go to View menu and select the Request and run a report e-Urja – Site Survey Check List for LT. Enter the SR Number in the parameters.
Take a printout of the report.
Output
Site Survey details will get captured which will be used for further processing. Form and task will get closed.
Confidential 19
CRM – Standard Operating Procedures DISCOM
SOP: CRM 09: PREPARE ESTIMATE
Purpose
It is used for the preparation of the estimate based on the application details and site survey details which will be further used for issuing a Firm Quotation to the consumer once estimate is approved.
Scope
We can prepare estimate considering all the combination of Consumer Category, Tariff, Load, Survey Category and Scheme.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Group Items from the Cost Data Sheet.
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Prepare’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Prepare task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Reconciliation Form’ form. Transformer Information window will open once you click on Tab button.
Confidential 20
CRM – Standard Operating Procedures DISCOM
1. If C Category, User will have to select New Transformer Item Code and Old Transformer Item Code. Cost in INR and Capacity in KVA will be populated. The Transformer cost for C will be calculated.
2. If D Category, User will have to select New Transformer Item. Cost in INR and Capacity in KVA will be populated. The Transformer cost for D will be calculated.
Click on Close Window button which will Save, Close and calculate the cost borne by the consumer and cost borne by the company.
Security Deposit & Development Charges will get automatically populated. Click on the ‘Use Template’ button to select from standard bill of material which will
open Bill of Material form. Enter Group Code in the Group Details in the ‘Bill of Material’ form Click on Copy Details button will copy Group, Material and Labor item to
reconciliation form. Once the Group Item is copied, Consumer Total and Company Total value for the group will get calculated and displayed
User can change the quantity of the group level which will affect the consumer and company total and it will also affect the material and labor quantity.
After estimate has been prepared, click on Transfer Charges button to transfer the details to service request form.
Go to View menu and select the Request and run a report e-Urja – Estimate for Providing a Connection. Enter the SR Number in the parameters.
Take a printout of the report.
Output
Estimate will be prepared considering all the combination of Consumer Category, Tariff, Load, Survey Category and Scheme. Form and task will get closed.
Note : Follow the Steps from SOP: CRM 01 to SOP: CRM 09 for all the Consumer who are forming a group
Confidential 21
CRM – Standard Operating Procedures DISCOM
GROUP CONNECTION IND/LIGHTING
SOP: CRM 10: CONTACT CENTER
Purpose
Contact Center is used to create the Dummy Consumer in the system. Information which is captured in Contact Center is Name, and Address of a Consumer.
Scope
This will be used to create the dummy Consumer in the system Name and Address. Responsibility
Sub Division : JE
Input
Consumer Type as Person/Organization If Person then First Name, Middle Name, Last Name. If Organization then name of
the Organization Land Survey No, Building Type, Description of Premises Address1, Address2, Address3, State, District, Taluka, City, Postal Code, Village
Census Code.
Navigation
Navigation Path: eUrja: Customer Support Customer Management Contact Center
Procedure
Click on the ‘Create’ Button available on the right side of the ‘Contact Center’ form. This will open a new form ‘Create Customer’.
Select the Type of the Prospective Consumer. It could be person or an organization. Enter the name of Person or the Organization. Add other information in the “Create Customer” form like Phone, email etc. Click on Address Details button to open a form for the address entry and add
Address1, Address2, Address3, State, District, Taluka, City, Postal Code, and Village Census Code.
After entering all the details, click on “Save” button. System will generate a unique number for that dummy customer.
Output
Confidential 22
CRM – Standard Operating Procedures DISCOM
A Temporary Consumer will be created in the system with Temporary Consumer Number/Account Number.
SOP: CRM 11: CREATE SERVICE REQUEST
Purpose
Service Request is created to register a request of a consumer. For one consumer we can register one service request at a time.
Scope
Once the Service Request is generated, it will be generate the unique number which will be given to the consumer for future reference. It will be used for tracking the consumer request.
Responsibility
Sub Division : JE
Input
Consumer Name Service Request Type
Navigation
Navigation Path: eUrja: Customer Support Service Requests > Create Service Request
Procedure
Select the consumer name from the LOV against the Consumer Name field which will automatically populate the number.
Select the Service Request Type ‘Group Connection Ind/Light’ from the LOV against the SR type field
Go to Related Objects tab, attach an individual service request to a group service request by selecting the Service Request No. from LOV.
After entering all the details, click on “Save” button. System will generate a unique Service Request Number.
Output
Service Request is generated for the Consumer Request. For one consumer we can register one service request at a time. This SR Number will be used to track the request of the consumer in future.
Confidential 23
CRM – Standard Operating Procedures DISCOM
SOP: CRM 12: CREATING A TASKS
Purpose
Tasks are the steps which will be required to be followed for the completion of that particular Request. User will have to follow one task after another task.
Scope
Once the task is created, users will have to follow the tasks step by step. User will not be allowed to go ahead unless and until last task is closed. In system user can create the task manually or can create a template which consists of various task which will be required to be followed for the completion of that Service Request. Once the entire tasks are closed, we can close the SR which means consumer request is closed.
Responsibility
Sub Division : JE
Input
Task Template Selection
Navigation
Navigation Path: eUrja: Customer Support Service Requests > Create Service Request
Procedure
In Service Request form, go to Tasks tab. Click on Use Template button to select the template. This will open the ‘Create Tasks
from Template Group’ form. Select ‘LT Industrial Logical Group Connection with lighting’ from the LOV
against the Template Group. Once you select template as Group Connection Process for a Industrial/Lightening
template and click on the ‘Create Tasks’ it will populate the entire tasks predefined for ‘LT Industrial Logical Group Connection with lighting’
Output
It will populate the entire tasks predefined for ‘LT Industrial Logical Group Connection with lighting’.
SOP: CRM 13: GROUP COMBINE
PurposeConfidential 24
CRM – Standard Operating Procedures DISCOM
This task is used to combine the estimate of the child service requests.
Scope
Combining of the estimate of the child service requests.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Group Combine’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Group Combine task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will combine all the TS details of the child and close
the task by putting the Actual End Date.
Output
The task combines all the TS of the child SR into the parent SR.
SOP: CRM 14: ESTIMATE APPROVAL
Purpose
Estimate Approval is used to take the approval of the estimate which was prepared by the user.
Scope
Confidential 25
CRM – Standard Operating Procedures DISCOM
It will send the estimate for the approval to higher authorities as per the DOP.
Responsibility
Sub Division : JE/SA/DEDivision : AO/EEAt Circle : AO/SEAt Corporate : AO/SE/GM/CE
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Estimate Approval Click ‘Task Dtls’ tab
Procedure
Workflow will get launched with a message “Workflow Successfully Launched” The estimate approval will take the defined workflow for approval is as per DOP. Approver user will have facility to Approve, Reject and Request Information. If user
will click on Approve button it will go to higher authority for approval. If User rejects it, it will send a notification to SR Owner. User can Request information by selecting the user name. Once it is finally approved, the entire user which had approved as well as Service Request Owner will get notification regarding the approval
Output
An Approved Estimate with task of Estimate Approval as closed
Confidential 26
CRM – Standard Operating Procedures DISCOM
NEW CONNECTION LT
SOP: CRM 15: FIRM QUOTATION
Purpose
This functionality will be used issue a Firm Quotation to the consumer after generating the Invoice in the system. Invoice and SR will be unique No for accepting the payment from the consumer.
Scope
Issuing of a Firm Quotation to the consumer which will be used for the payment.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date SR Number
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Firm Quotation’
Procedure
Go to Charges tab and click on Submit button to generate the Firm Quotation. Go to View menu and select the Request and run a report e-Urja - Firm Quotation
Letter and issue it to the consumer. . Enter the SR Number in the parameters. Take a printout of the report and issue a copy of it to the Consumer.
Output
Firm Quotation letter will be generated in the system with complete details like SR No, SR Type, SR date, Name, Connection address, Billing address, Class, Category, Tariff, Scheme, Survey Category,
Confidential 27
CRM – Standard Operating Procedures DISCOM
Load Details and Group Items as Security Deposit, Development Charges, Agreement Fees, Breakeven Charges etc and approved TS group items.
SOP: CRM 16: COLLECTION OF FIRM QUOTATION AMOUNT
Purpose
To collect the firm quotation amount from the consumer. Scope
Collection of the firm quotation amount from the consumer
Responsibility
Sub Division : Cashier
Input
Receipt Type Payment Method Cash/Instrument No. Receipt Amount Activity Receipt Information in DFF SR No in DFF
Navigation
Navigation Path: Indian Local Receivables Receipts Receipts
Procedure
Select Receipt Type as Standard Select Payment Method as Cash Receipt. Enter Cash/Instrument No. This field is used for entering details of cash and cheque. Enter Receipt Amount. Click on Descriptive Flex Field which will open a new window of Receipt Information.
Select Transaction Name from List of Values as Firm Quotation. Select the Service request Number from List of Values. Click on the Full Amount. If amount entered in Receipt Amount does not match with the standard registration charges for the new connection amount then system will not accept the amount. If it matches, then system will put the value as ‘Y’.
Select Trans Number as Invoice Number. Click on Save button to save the data which will generate system generated
Document Number (MR No.). Click on Apply button which will open Applications window and save the record.
After saving the record close the window of Applications.Confidential 28
CRM – Standard Operating Procedures DISCOM
Output
System will generate Document Number which is a Money Receipt Number. It is visible in the ‘More’ tab of the Receipt form.
Workflow notification will get launch to inform the SR Owner Task of ‘Firm Quotation will get closed PPR No will get generated
Workflow Notification
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Workflow notification.
Responsibility
Sub Division : JE
Procedure
Then select the where user will see the subject line as “Payment Against "Firm Quotation" for SR number "<SR Number>" has been received”. Once you click on the notification you will see the notification containing information about the payment made by the consumer.
Output
Workflow notification will display the information about the payment received from the consumer for firm quotation.
Find Service Request
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Responsibility
Sub Division : JE
Input
Service Request Number
Procedure
Confidential 29
CRM – Standard Operating Procedures DISCOM
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Once the Service Request is open, click on ‘Receipts’ tab which will open a form
Receipt window which will display information about the payment made by the consumer. PPR number will also get generated by the system which will also get viewed in this form.
Output
Receipt Information with PPR Number can be viewed by the user. Task of Firm Quotation will get closed
Note : Follow the Steps from SOP: CRM 15 to SOP: CRM 16 for all the Consumer who are forming a group
GROUP CONNECTION IND/LIGHTING
SOP: CRM 17: MATERIAL REQUISTION
Purpose
Confidential 30
CRM – Standard Operating Procedures DISCOM
This task will be used to do the requisition of material and issue of material from Division to Sub Division.
Scope
Requisitions for materials/items not available in the store/sub-inventory.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Material Requisition’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Material Requisition task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Reconciliation Form’ form. Click on Material Requisition button, this will have 3 options “Request”, “Close
Task”, “Cancel”. If user selects “Request” automatically a Move Order gets generated. If user selects “Close Task” then the Task gets closed assuming that no material is required from Divisional store. If the user selects “Cancel” then the Material Requisition window stays open as it is.
Run the process at your end (Subdivision) with single request ‘e-Urja Request Move Order’ to generate the report of requested quantity of materials for the CRM against a particular Service Request Number. Enter the Move Order Number in the parameters.
Take a printout of the report and issue a copy of it to the DO Stores.
Output
System will generate the Requisition Number automatically on the DO from the SDO office for all the items which were estimated during the estimate preparation. Form and task will get closed.
Approving the Material Requisition
Navigation Path:
Navigation Path: India Local Inventory Move Orders Move ordersConfidential 31
CRM – Standard Operating Procedures DISCOM
Responsibility
At Division : Divisional Superintendent- Accounts (for MR Audit and approval)Divisional Stores Incharge (for transacting MR)
Input
Move Order No./Material Requisition No.
Procedure
Open the Move Order form by clicking the Move Orders menu item Click on Ctrl + F11 for the query the record. Enter the Move Order No which was
generated in Reconciliation Form. Click on Approve button. Approve button, when this button is clicked, if there is a
“planner” defined for this Ite, a approval notification will go to the planner, and when planner approve that notification the Move Order gets approved, else if there is no planner defined then on clicking “Approve” button on the Move order form, the Move order gets approved
For the planner to approve the Move order system send a separate notification for each Item in the move order, hence there is also a Custom form developed named “Move Order Approval” form, using which the approver can approve al the items in a move order in single click.
Output
Move Order No./Material Requisition No. will get approved.
Transact of Move Order
Navigation Path:
Navigation Path: Indian Local Inventory Move Orders Transact Move Orders
Responsibility
At Division : Divisional Superintendent- Accounts (for MR Audit and approval)Divisional Stores Incharge (for transacting MR)
Input
Move Order No. /Material Requisition No.
Procedure
Open the Transact Move Order form by clicking the Transact Move Orders menu item.
Enter the Move Order Number and click on Find Button.
Confidential 32
CRM – Standard Operating Procedures DISCOM
It will display all the items in that Move Order. Select the Item by selecting the check box. Click on View/Update Allocations
button and enter the Quantity and click on Transact button to issue the material to the Sub Division.
OR Another method is, if user wants to issue all the material or the multiple materials,
select all those material by click on select Check Box. Click on the Allocate button. It will allocate the items for that particular move order. Then again select the material by selected the check box, and click on Transact button. Transact button will issue the material to the Sub Division
While issuing the materials, a printout of the materials issued against the materials requested in given to the SDO by running a request ‘e-urja Issue Move Order’. Enter the Move Order number in the parameter field.
Take a printout of the report and issue a copy of it to the SDO Office.
Output
Material will get transacted from the DO Stores to SDO Stores.
SOP: CRM 18: SUB WORK ORDER CREATION
Purpose
Confidential 33
CRM – Standard Operating Procedures DISCOM
Sub Work Order is created in the system for issuing it to the contractor for start of the Labor Items mentioned in it.
Scope
Requisitions of labor works for CRM against the Service Request Number for the start of work.
Responsibility
Sub Division : JE
Input
Purchase Order Number / Annual Rate Contract Number Service Request Number Ship to Location
Navigation
Navigation Path: Indian Local Purchasing Purchase Orders Releases
Procedure
Select the Purchase Order Number / Annual Rate Contract Number from LOV in PO, Rev Field.
Release Number, Created, Supplier, Site, Buyer, Contact will get automatically populated.
Select Descriptive Flex Field name PO releases in release header. Select Context as “Service Request”. Select Service Request Number and Ship to
Location from List of Value and Click on OK Button. Once user will click on OK button, all the Labor Items with quantity will get populated
in the form. Click on Save button to save all the records.
Output
An Unapproved Sub Work Order will be created in the system which requires an approval.
SOP: CRM 19: APPROVING SUB WORK ORDER
Purpose
To approve Sub Work Order which was created in the system for issuing it to the contractor for start of the Labor Items mentioned in it.
Scope
Confidential 34
CRM – Standard Operating Procedures DISCOM
Approving of Sub Work Order of labor works for CRM against the Service Request Number for the start of work.
Responsibility
Sub Division : DE
Input
Purchase Order Number / Annual Rate Contract Number Release No.
Navigation
Navigation Path: Indian Local Purchasing Purchase Orders Releases
Procedure
Open the Release form by clicking the Release menu item Click on Ctrl + F11 for the query the record. Enter the Purchase Order Number and
Release No. Click on Approve button. Approve button will approve the Release i.e. Sub Work
Order. Go to View menu and select the Request and run a report e-Urja – Sub Work Order
Report and issue it to the Contractor. Enter the SR Number and in the parameters. Take a printout of the report and issue a copy of it to the Contractor.
Output
An Approved Sub Work Order will be created in the system.
SOP: CRM 20: INSTALL
Purpose
This task is used to issue a material to the contractor for starting the work.
Scope
Issue of materials only against an approved TS and Task.
Responsibility
Sub Division : JE
Confidential 35
CRM – Standard Operating Procedures DISCOM
Input
Service Request Number Assignee Type, Assignee, Actual Start Date
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Once the Service Request is open, select the Install task. Click on “Task Dtls” tab which will open the Reconciliation form. Contractor Name, Annual Work Order No. (WON), Sub Work Order No. (WON)
will automatically populate. Then click on Contractor Issue button to send the material to debrief which will
finally get issued to the contractor. Reconciliation Form will automatically get closed. Go to View menu and select the Request and run a report e-Urja – Gate Pass
Report and issue it to the Contractor. Enter the SR Number and in the parameters.
Take a printout of the report and issue a copy of it to the Contractor.
Output
Material will get issued to the contractor.
SOP: CRM 21: INTIMATION
Purpose
This task is used capture the details of the Electrical Inspection done by the government electrical inspector
Scope
To capture the details of the Electrical Inspection
Responsibility
Sub Division : JE
Input
Confidential 36
CRM – Standard Operating Procedures DISCOM
Assignee Type, Assignee, Actual Start Date General Information, H.T. Side, L.T. Side and Transformer Details
Navigation Path:
Navigation Path: Service Request Form Task Tab Select the Task ‘Intimation’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Intimation task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Electrical Inspection’ form. Once the form is open, it will populate Letter No, Letter Date, and Actual Work Start
Date. Enter the Engineer Name which is electrical inspector name is mandatory in General
Information tab. User will have to enter details in General Information, H.T. Side, L.T. Side and
Transformer Details tab. Click on ‘Save’ button to save the data. Once all the detail has been entered click on “Close Task” button, to close the task
of Document Details. If user presses Yes, then form will get closed and task will also get closed. If user presses No, then form will get closed and task will remain open. If user presses Cancel, then it will remain in the same form.
Go to View menu and select the Request and run a report e-Urja – Electrical Inspection Report. Enter the SR Number in the parameters.
Take a printout of the report.
Output
Electrical Inspection details will get captured. Form and task will get closed.
SOP: CRM 22: MATERIAL RETURN
Purpose
The task is used to return the material from the contractor to the SDO stores.
Scope
To return the material from the contractor to the SDO stores.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Service Activity Item Code Qty
Confidential 37
CRM – Standard Operating Procedures DISCOM
Serial No or Lot No if required
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Material Return’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Material Return task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on Debrief button and go to Material tab. Select the service activity as Debrief Item Retuned. Select the item codes from the LOV, enter the quantity to be returned, select the Sub
Inventory and locator Code from the LOV, select the Serial No or Lot No if required which user wants to be returned to the Sub Division.
Change the Assignment Status to Working and save. Then change the assignment status to Completed and Save. After this go Menu bar View - > Request - > Check Specific Request and click on Find. There will be a program called “Update Debrief line” running. Once it gets completed, close the window. Again go to Find Service Request and open the SR.
Then change Assignment status to Closed and save. After this go Menu bar View - > Request - > Check Specific Request and click on Find. There will be a program called “Update Debrief line” running. Once it gets completed, close the window. Again go to Find Service Request. With this all the material will get returned into the Sub Division.
Click on “Task Dtls” tab to open the Reconciliation form. User will see the Qty which he has returned in Returned Qty Column. Click on “Save” button, which will save the data. Click on Contractor Return button to close the task and the form.
Output
Material which had remained unused by the contractor will get returned into the SDO and Inventory of the SDO for the returned items will get increased.
SOP: CRM 23: RECEIPT OF THE SERVICE ITEMS
Purpose
This is used to receive the service items. In this user will enter the actual quantity of work done by the contractor. With this Contractor Bill Finalization and Consumer Bill Finalization will take place
Scope
To receive the service items from the contractor to the SDO stores.
Responsibility
Sub Division : JE
Confidential 38
CRM – Standard Operating Procedures DISCOM
Input
Purchase Order Number Release No Qty
Navigation
Navigation Path: Indian Local Purchasing Receiving Receipts
Procedure
Enter the Purchase Order Number & Release No. and click on the find button. Select the line item which you want to do the receiving by clicking the check box. User can change the quantity with the actual qty. Click on Save button to save all the records.
Output
Receiving of the service items from the contractor to the SDO stores.
SOP: CRM 24: RECEVING TRANSACTION OF THE SERVICE ITEMS
Purpose
This is used to inspect the service items which are already receipt by the JE of the SDO.
Scope
To inspect the service items received by the JE of the SDO.
Responsibility
Division : DE
Input
Purchase Order Number Release No
Confidential 39
CRM – Standard Operating Procedures DISCOM
Navigation
Navigation Path: Indian Local Purchasing Receiving Receiving Transaction
Procedure
Enter the Purchase Order Number & Release No. and click on the find button. Select the line item which you want to do the receiving by clicking the check box. User can change the quantity with the actual qty. Click on Inspect button and Click on Save button to save the records.
Output
Inspection of the service items already receipt by the JE of the SDO.
SOP: CRM 25: SITE INSPECTION
Purpose
This task is used for the reconciliation of the material and labor which will be used for Customer Bill Finalization if required. Material will get reconciled by the Item issued to Contractor with the Item Returned by the Contractor. User also has the facility to change the site inspection quantity. Labor will get reconciled with the issue of the Release and Receipt of the service items
Scope
This task is used for the reconciliation of the material and labor.
Responsibility
Division : JE
Input
Assignee Type, Assignee, Actual Start Date Site Inspection Qty if required
Confidential 40
CRM – Standard Operating Procedures DISCOM
Navigation
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Select the task i.e. the Site Inspection task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Reconciliation Form’ form. Net Issue Qty which will automatically populated in Inspect Qty.Net Issue Qty is the
difference between Issue Qty, Returned Qty. User has the facility to change the Inspect Qty. User can increase or decrease the
qty. If user increases the Inspect Qty, Excess/Deficit Qty and Excess/Deficit Amount will show negative. If user decreases the Inspect Qty, Excess/Deficit Qty and Excess/Deficit Amount will show positive.
User has the facility to enter the Qty in Amount Cons. Charge Qty field will charge or refund the amount from the consumer.
In Labor Tab, user will see the Inspect Qty will be populated from receipt made at the time of receiving of the material, Unit value will also get populated from the Purchase Order. So Excess /Deficit Qty and Amount will be calculated.
Once user clicks on Freeze button once the reconciliation is over. It will send the amount that needs to be charged to the consumer or to be refunded from the consumer to Service Request form in Charges tab as 96 MISCELLANEOUS PAYMENT.
Go to Charges tab and click on Submit button to generate the Invoice.
Output
Reconciliation of the material and labor will be done and amount will be charged to the consumer.
Confidential 41
CRM – Standard Operating Procedures DISCOM
SOP: CRM 26: COLLECTION OF BILL FINALIZATION AMOUNT
Purpose
To collect the final bill amount from the consumer. Scope
Collection of the final bill amount from the consumer
Responsibility
Sub Division : Cashier
Input
Receipt Type Payment Method Cash/Instrument No. Receipt Amount Activity Receipt Information in DFF SR No in DFF
Navigation
Navigation Path: Indian Local Receivables Receipts Receipts
Confidential 42
CRM – Standard Operating Procedures DISCOM
Procedure
Select Receipt Type as Standard Select Payment Method as Cash Receipt. Enter Cash/Instrument No. This field is used for entering details of cash and cheque. Enter Receipt Amount. Click on Descriptive Flex Field which will open a new window of Receipt Information.
Select Transaction Name from List of Values as Bill Finalization. Select the Service request Number from List of Values. Click on the Full Amount. If amount entered in Receipt Amount does not match with the standard registration charges for the new connection amount then system will not accept the amount. If it matches, then system will put the value as ‘Y’.
Select Trans Number as Invoice Number. Click on Save button to save the data which will generate system generated
Document Number (MR No.). Click on Apply button which will open Applications window and save the record.
After saving the record close the window of Applications.
Output
System will generate Document Number which is a Money Receipt Number. It is visible in the ‘More’ tab of the Receipt form.
Workflow notification will get launch to inform the SR Owner Task of ‘Site Inspection’ will get closed
Workflow Notification
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Workflow notification.
Responsibility
Sub Division : JE
Procedure
Then select the where user will see the subject line as “Payment Against "Bill Finalization" for SR number "<SR Number>" has been received”. Once you click on the notification you will see the notification containing information about the payment made by the consumer.
Output
Workflow notification will display the information about the payment received from the consumer for final bill.
Find Service RequestConfidential 43
CRM – Standard Operating Procedures DISCOM
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Responsibility
Sub Division : JE
Input
Service Request Number
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Once the Service Request is open, click on ‘Receipts’ tab which will open a form
Receipt window which will display information about the payment made by the consumer.
Output
Receipt Information can be viewed by the user. Task of Site Inspection will get closed
Confidential 44
CRM – Standard Operating Procedures DISCOM
NEW CONNECTION LT
SOP: CRM 27: AGREEMENT (Only For LT Industrial Group Connection with
Lighting-Industrial task template)
Purpose
This task is used for doing the agreement between electricity company and consumer. In the agreement details about load and other parameters of connection is to be written. Onsumer and company representatives is to be present at the time of agreement. Scope
This task is used for doing the agreement. User will close the task when the consumer submits the details about agreement..
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation Path:
Navigation Path: Service Request Form Task Tab Select the Task ‘Agreement’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Agreement task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Notes’ in the SR form and fill the details about connection parameters
and the formalities regarding representatives. Save the record there. After this, click on Task Dtls tab which will close the task by putting the Actual End Date.
Output
This task is used for doing the agreement between Electricity Company and consumer. In the agreement details about load and other parameters of connection is to be written. Consumer and company representatives are to be present at the time of agreement.Confidential 45
CRM – Standard Operating Procedures DISCOM
SOP: CRM 28: SUBMIT
Purpose
This task is used for issuing the 2 months notice from the date of completion of task. Within this 2 month user will have to submit the Test Report. If Inform to Customer task is not closed system will launch the workflow to SR owner for completion of 2 months and data will get transfer to billing with consumer number generated and as an unconnected consumer.
Scope
This task is used for considering the 2 months from the date of completion of task. User will close the task when the Contractor submits the Work Completion Report.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation Path:
Navigation Path: Service Request Form Task Tab Select the Task ‘Submit’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Submit task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will close the task by putting the Actual End Date.
Output
Once the contractor has submitted the work completion report user will close the task which will help system to calculate the 2 months unless and until the next task of Inform to Customer is not closed. After 2 months system will launch a notification to SR Owner about the completion of time and generate the consumer number and send to billing as an unconnected consumer.
Confidential 46
CRM – Standard Operating Procedures DISCOM
SOP: CRM 29: INFORM TO CUSTOMER
Purpose
This task is used for entering Appliance details at the time of Test Report. User will not be able to increase the load more than the applied load.
Scope
Appliance details at the time of Test Report
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Load Details
Navigation Path:
Navigation Path: Service Request Form Task Tab Select the Task ‘Inform to Customer’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Inform to Customer task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Consumer Appliance Form’ Click on Show Details button which will display Load Details which was selected at
the time of A1 Application Form. User will have to change the Appliance Details. User will have facility to reduce the
Load but not increase the Load. Click on “Save” button, which will display the Lighting, Cooling, Heating and Total
Load in Document Type Details. Once all the detail has been entered click on “Close Task” button, to close the task
of application entry. System will ask user about closing of the task. User will have to press Yes, No or Cancel button. If user presses Yes, then form will get closed and task will also get closed. If user presses No, then form will get closed and task will remain open. If user presses Cancel, then it will remain in the same form
Output
Data related to the consumer load will be captured in this form. Form and task will get closed.
SOP: CRM 30: TEST REPORT CHARGES
Purpose
Confidential 47
CRM – Standard Operating Procedures DISCOM
To take the test report charges from the consumer
Scope
Test Report Charges will be taken from the consumer
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Test Report Charges’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Test Report Charges task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Charge Details’ form. It will display the
amount to be recovered from the consumer for the test report. Click on ‘Save’ button to save the data.
Output
It will display the amount of test report charges to be taken from the consumer.
SOP: CRM 31: COLLECTION OF TEST REPORT CHARGES
Purpose
To collect the test report charges from the consumer this was displayed at the time of Test Report Charges task. Scope
Confidential 48
CRM – Standard Operating Procedures DISCOM
Collection of the test report charges from the consumer
Responsibility
Sub Division : Cashier
Input
Receipt Type Payment Method Cash/Instrument No. Receipt Amount Activity Receipt Information in DFF SR No in DFF
Navigation
Navigation Path: Indian Local Receivables Receipts Receipts
Procedure
Select Receipt Type as Miscellaneous Select Payment Method as Cash Receipt. Enter Cash/Instrument No. This field is used for entering details of cash and cheque. Enter Receipt Amount. Click on Descriptive Flex Field which will open a new window of Receipt Information.
Select Transaction Name from List of Values as Test Report Charges. Select the Service request Number from List of Values. Click on the Full Amount. If amount entered in Receipt Amount does not match with the standard registration charges for the new connection amount then system will not accept the amount. If it matches, then system will put the value as ‘Y’.
Against the activity field in the Purpose region, select ‘Test Report Charges’ from the LOV
Click on ‘Save’ button to save the data.
Output
System will generate Document Number which is a Money Receipt Number. It is visible in the ‘More’ tab of the Receipt form.
Workflow notification will get launch to inform the SR Owner Task of ‘Test Report Charges’ will get closed
Workflow Notification
Navigation Path:
Confidential 49
CRM – Standard Operating Procedures DISCOM
Navigation Path: eUrja: Customer Support Service Requests Workflow notification.
Responsibility
Sub Division : JE
Procedure
Then select the where user will see the subject line as “Payment Against "Test Report Charges " for SR number "<SR Number>" has been received”. Once you click on the notification you will see the notification containing information about the payment made by the consumer.
Output
Workflow notification will display the information about the payment received from the consumer for test report charges.
Find Service Request
Navigation Path:
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Responsibility
Sub Division : JE
Input
Service Request Number
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Once the Service Request is open, click on ‘Receipts’ tab which will open a form
Receipt window which will display information about the payment made by the consumer..
Output
Receipt Information can be viewed by the user. Task of ‘Test Report Charges’ will get closed
Confidential 50
CRM – Standard Operating Procedures DISCOM
SOP: CRM 32: METER ISSUE
Purpose
This task will be used for the issue of meter to the consumer through the debrief functionality.
Scope
It is used to issue the meter to the consumer
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date Service Activity Item Code
Confidential 51
CRM – Standard Operating Procedures DISCOM
Qty Serial No
Navigation
Navigation Path: Service Request Form Task Tab Select the Task ‘Meter Issue’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Meter Issue task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on Debrief button and go to Material tab. Select the service activity as Debrief Item Issued. Select the item codes from the LOV, enter the quantity to be returned, select the Sub
Inventory and locator Code from the LOV, select the Serial No which user wants to be issue to the Consumer.
Change the Assignment Status to Working and save. Then change the assignment status to Completed and Save. After this go Menu bar View - > Request - > Check Specific Request and click on Find. There will be a program called “Update Debrief line” running. Once it gets completed, close the window. Again go to Find Service Request and open the SR.
Then change Assignment status to Closed and save. After this go Menu bar View - > Request - > Check Specific Request and click on Find. There will be a program called “Update Debrief line” running. Once it gets completed, close the window. Again go to Find Service Request and open the SR.With this all the material will get issued into the Consumer.
Output
Meter will get issued to the consumer and it is not installed at consumer premises. Task will also get closed automatically.
SOP: CRM 33: RELEASE CONNECTION
Purpose
This task is used for entering Appliance details at the time of Test Report. User will not be able to increase the load more than the test report load.
Scope
Appliance details at the time of Release Connection
Responsibility
Sub Division : JE
InputConfidential 52
CRM – Standard Operating Procedures DISCOM
Assignee Type, Assignee, Actual Start Date Load Details
Navigation Path:
Navigation Path: Service Request Form Task Tab Select the Task ‘Release Connection’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Release Connection task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab which will open the ‘Consumer Appliance Form’ Click on Show Details button which will display Load Details which was selected at
the time of Test Report.s User will have to change the Appliance Details. User will have facility to reduce the
Load but not increase the Load. Click on “Save” button, which will display the Lighting, Cooling, Heating and Total
Load in Document Type Details. Once all the detail has been entered click on “Close Task” button, to close the task
of application entry. System will ask user about closing of the task. User will have to press Yes, No or Cancel button. If user presses Yes, then form will get closed and task will also get closed. If user presses No, then form will get closed and task will remain open. If user presses Cancel, then it will remain in the same form
Output
Data related to the consumer load will be captured in this form. Form and task will get closed.
SOP: CRM 34: ACCOUNT GENERATION
Purpose
This task is used for generating the Permanent Account/Consumer Number
Scope
Generation of the Permanent Account/Consumer Number
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation Path:
Confidential 53
CRM – Standard Operating Procedures DISCOM
Navigation Path: Service Request Form Task Tab Select the Task ‘Account Generate’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Account Generate task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Click on ‘Task Dtls’ tab to generate the Consumer/Account Number. The Task of Account Generate will get closed.
Output
It will generate the Permanent Consumer Number.
SOP: CRM 35: CHECK
Purpose
This task is used to check the LT Consumer Form which is a consumer master which contains data related to LT & HT Poles, Transformer Center, Feeder and Sub Station details, Security Deposit etc , Meter and Seal Information.
Scope
Check the LT Consumer Form which is a consumer master form.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Confidential 54
CRM – Standard Operating Procedures DISCOM
Navigation Path: Service Request Form Task Tab Select the Task ‘Check’ Click ‘Task Dtls’ tab
Procedure
Select the task i.e. the Submit task in Task tab. Enter the Assignee Type, Assignee and Actual Start Date. Go to SOP: CRM 31: LT CONSUMER FORM Click on ‘Task Dtls’ tab which will close the task by putting the Actual End Date.
Output
This task will tell user to go to the LT Consumer Form.
SOP: CRM 36: LT CONSUMER FORM
Purpose
This is used to check the LT Consumer Form which is a consumer master which contains data related to LT & HT Poles, Transformer Center, Feeder and Sub Station details, Security Deposit etc , Meter and Seal Information.
Scope
Update the LT Consumer Form which is a consumer master form.
Responsibility
Sub Division : JE
Input
Assignee Type, Assignee, Actual Start Date
Navigation
Navigate: Customer Support Service Request Extension LT Consumer FormConfidential 55
CRM – Standard Operating Procedures DISCOM
Procedure
Select the Consumer/Account Number from the list of values. Once he has selected the Consumer/Account Number, click on Find button. Consumer Details will automatically populated in Additional Information, Meter
Details and Seal Details Select the Terminal Cover Seals and MMN Seal Serial Number in Seal Details tab. Click on Update button to update data related to billing. If user does not rights to
update, then click on Billing button which will send the information to billing person for the updating of the billing data only.
Output
Consumer Master will be updated and can be used for future reference.
SOP: CRM 37: CLOSING SERVICE REQUEST
Purpose
Purpose of closing the Service Request means that all the task or work related to the SR type is finished and now it does not require any updation. Once we close the service request, all the data will get transferred to billing. Unless and until it is not closed data will not flow from CRM to Billing.
Scope
Closing the Service Request will send the data to the billing.
Responsibility
Sub Division : JE
Input
Status
Navigation
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter.
Confidential 56
CRM – Standard Operating Procedures DISCOM
Select any one of the result and click on Ok button, which will open a Service Request form with data of that selected result. Once the Service Request is open, change the status from Open to Closed. Once the Service Request is closed user will not be able to make any changes in Service Request.
Output
Service Request is closed user will not be able to make any changes in Service Request and all the data will get transferred to billing.
GROUP CONNECTION IND/LIGHTING
SOP: CRM 38: CLOSING SERVICE REQUEST
Purpose
Purpose of closing the dummy Service Request means that all the task or work related to the SR type is finished and now it does not require any updating.
Scope
Closing the Service Request will not allow user for any further modification.
Responsibility
Sub Division : JE
Input
Status
Navigation
Navigation Path: eUrja: Customer Support Service Requests Find Service Requests
Procedure
Enter the Service Request Number in Number Column. Click on Search button, which will display all the results based on the entered
parameter. Select any one of the result and click on Ok button, which will open a Service
Request form with data of that selected result. Once the Service Request is open, Confidential 57
CRM – Standard Operating Procedures DISCOM
change the status from Open to Closed. Once the Service Request is closed user will not be able to make any changes in Service Request.
Output
Service Request is closed user will not be able to make any changes in Service Request.
Confidential 58