GENTLE POWER BLEACHand
STAINING ON WHITE IMPROVEMENTBrilliant Red Shade, 100% Cotton, Heavy Fabric
The aim of Trial is To get 5 degree for brilliant red shade staining on to white .
Gentle Power BleachingProcess and Recipe
65 °°°°C 30‘
30 °°°°C
1/(2)/(3)
50 °°°°C 10‘ 15‘
9
50 °°°°C
8
4/5/6/7
5‘
Dyeing in the
same bath
Application: Exhaust
Liquor ratio: 1:10
Material: CO 100%
Machine: Jet, Brazolli
1 2.0 g/l CLARITE ONE
2 2.0 g/l INVAZYME SOFT (possibly)
3 3.0 g/l SODA Ash
4 3.0 g/l INVATEX LTA
5 6.0 ml/l H2O2 35 %
6 0.5 g/l INVAZYME LTE
8 0.3 – 1.0 g/l INVAZYME CAT
9 0.3 – 1.0 g/l INVAZYME CAT
Staining on white improvement
Dyeing with Novacron Brilliant Red FN-3GL
Dyeing process
Auxiliaries
Dyes
Salt
1/10 Soda ash
9/10 Soda ash
A:
B:
C:
D1:
D2:Washing-off
process
10’
B D 1
20’ 60’10’30’Lineer
5’End pH 10.65
pH 5.80
pH 5.90 pH 8.40
A
15’Lineer
10’
C
pH 6.10
25’70%Prograsif
5’
D 2
pH 10.45
60°C30°C • LR 1:8Dyeing Recipe:
0.25 % Albatex DS
3,1 % Novacron Brilliant Red FN-3GL0,42 % Novacron Red FN-R-01
60 g/l Salt22 g/l Soda
Staining on white improvement
Washing Off
Washing-off process
1. 40’C Rinsing
2. 50’C Notralisation
3. 95’C—15 Min Soaping with Eriopon WFE 2 g/l
4. 95’C—15 Min Soaping with Eriopon WFE 1 g/l
5. 80’C----10 min Rinsing
6. 80’C----10 min Rinsing
7. 60’C----10 min Rinsing
After Treatment
30’C
Albafix E: 3%
5’
60’C30 min.
Caustic: 2g/l
Cold RinsingNeutralization
Softening
Staining on white improvement
Samples
Raw Material
Gentle Power Bleached
Teflon Finished (this fabric will be used separately for red shade-red and white.
Staining on white improvement
Samples
Conventional Bleached
Gentle Power Bleached
Staining on white improvement
Staining on White
Washed at 40’C, 30 minutes with
Industrial detergants. Staining on
white is 5 degree.