Click here to load reader
Click here to load reader
1 Presentation title - edit in the Master slide
Range of available Heavy Transportation & Heavy Lifting Techniques
Gerrit Zenner - Global Area Sales Manager – Sarens Group Nuclear & Thermal Plants
Modular or Stick Built Solutions
• Partially or entirely constructed in factory
• Transport to site for assembly and installation
• Needs depend of technology provider
• There are some copy / paste systems (e.g. AP1000)
• Equipment build on frames (skid) or tailor made
Modular or Stick Built Solutions
• Primary circuit equipment is tested prior to arrival – in one piece – example reactor & steam generators
• Need for good supply chain
• Plenty of modular yards on West coast of UK & Scotland
Options for Transportation• Moorside Sellafield & Wylfa : will have
interface between Sea & Land
• Inventive solutions:River transportBeach landing
Building a Jetty (temporary)
• Building jetty (for maintenance afterwards)
• Port facilities
• Semi Submersible ships
• Geared ships
• Barges (different sizes) – draft - roro
Internal Transportation on Site
Companies with available equipment in UK :
•ALE
•Mammoet
•Sarens
Super Heavy Lifting Equipment
• Up to 200,000 M/T is available
• Capacity up to 5.000 ton @ 40m radius
• Global experience:ALE – Mammoet – Sarens
• OPEN TOP for installations of equipment or …..
Availability of Techniques
• Skidding & Jacking in via Hatch
• Bringing in equipment after Polar Crane & Dome is installed
• Reactor & Steam generators
Our advise : early engineering & involvement
Why : Different concepts with feasibility study