‘Patented composite column that is

produced using a unique lay-up method to place the composite

fibres into tension, creating a superior

compressive strength.’

SPECIFICATIONS BENEFITS FEATURES

• 50-tonne (50,000kg) Working Load Limit

• Solid steel engagement head, 150mm sq

• Composite column, 125mm sq

• CNC machined, fabricated steel base,500mm sq

• Chromoly bracing

• Corrosion resistant powder coating

• 10 year UV vinyl wrap

• Height/weight range: 800mm - 55.0kg | 900mm - 56.0kg

• Reduced risks associated with manual handling, positioning and storing

• Less than half the weight of other steel stands, in most cases

• Corrosion resistant to maximise durability, service life and reduce maintenance

• Increased productivity and reduced operational costs

• Considerably more mobile than steel alternatives

• Height adjusting inserts without pins and latches for safer use

• Exceedingly lightweight

• Composite technology

• Easily stored in close proximity

• Global IP protection

• Certified to the applicable regulatory standards, see below

• Replace heavy steel stands and timber blocks

• Trolley attachment for mobility

• Latch and pin free height adjusting inserts

50t | JACK STAND T3Specifically designed to safely support vehicles, machinery and equipment during repair, maintenance &/or storage activities:

GET YOUR GEAR OFF THE GROUND WITH THE WORLD’S LIGHTEST

To utilise innovative composite material designs in industrial applications with the objective of reducing weights and improving efficiency.

| GOAL |

Reduce the risk of personal injury that is related to the manual handling of jack stands and improve the adjustable height function by removing locking devices and pins.

| OBJECTIVES |

The WORLD’S LIGHTEST JACK STANDS that address personal injury risk and improve functionality, increasing productivity and operational savings.

| OUTCOME |

| CERTIFIED |

| MOBILE |Move freely and easily around the Workshop or from location to location using a trolley (without a forklift) and place underneath a non-supported load.

Fully certified to the applicable regulatory standards and may be sold singularly however must be used in pairs as per the Australian Standard.

1000mm - 57.0kg | 1100mm - 58.5kg 1200mm - 60.0kg | 1350mm - 62.0kg

Independently tested by University of Southern Queensland (USQ) and compliant with Australian Standard AS 2538:2016

‘Designed and Manufactured in Australia’

Part# CS-50-(mm)

Composite Stands Pty Ltd @ 2020Patent No: 2017254731 PO Box 450, East Maitland, NSW 2323 Australia e sales@compositestands.com.au w compositestands.com.au

Part# CS-50-(mm)

50t | JACK STAND T3

50t Composite Stands support a Caterpillar 796 AC Mining Truck that is being

assembled by Hastings Deering in the Equipment Assembly Workshop at Mackay.

“Reaching out today to express our happiness with your product here in Mackay. Very impressed with the Composite Stands we purchased for our Equipment Assembly Pad. They have made a huge impact reducing the risk with transport and manual handling of machinery stands in the area.” Graham Mallett, Service Supervisor

“Really great feedback from the guys on the floor in regards to the greatly reduced manually handling effort required when setting up for the truck to sit on compared to other stands that we have onsite.”

Paul Carman, Site Foreman

Courtesy of; Hastings Deering, Equipment Assembly Workshop at Mackay

Here is what the end users have to say: