Getting acquainted with PerformancePoint Dashboard DesignerApplies to: PerformancePoint Dashboard Designer, SharePoint Server 2010

You use PerformancePoint Dashboard Designer to create, edit, and publish dashboards to Microsoft SharePoint Server 2010. This article contains information to help you become familiar with Dashboard Designer and how you use it.

How do I install or open Dashboard Designer?

If PerformancePoint Services in Microsoft SharePoint Server 2010 is configured for your

organization and you have the necessary permissions, you can install or launch Dashboard

Designer.

 IMPORTANT     If you are using Mozilla Firefox as your Web browser, make sure that

Microsoft .NET Framework Assistant 1.1 is installed on your computer before you attempt to

install Dashboard Designer.

1. Using your Web browser, browse to the Business Intelligence Center. (Ask your

SharePoint administrator for the Web site address if you do not have it.) The Business

Intelligence Center is a SharePoint site that serves as a portal to PerformancePoint Services

and other applications. The Business Intelligence Center might resemble the following

image:

 

In the Business Intelligence Center, you will find information about SharePoint

business intelligence, including Excel Services, status indicators, and

PerformancePoint Services. You will also find links that you can use to open Help or

locate applications, such as Dashboard Designer.

 TIP    If you cannot find the Business Intelligence Center, contact your SharePoint

administrator.

2. In the Business Intelligence Center, click a section, such as Monitor Key

Performance, Build and Share Reports, or Create Dashboards. Additional information

about each area is displayed in the center pane: Click a link that says, “Start using

PerformancePoint Services.” 

3. The PerformancePoint site template opens. Click Run Dashboard Designer. 

 

4. If you have the necessary permissions assigned to you in SharePoint Server, Dashboard

Designer will install and open. 

©2009 Microsoft Corporation.

 

After you have opened Dashboard Designer at least once, you can open it by using

additional methods, such as the following:

Set up a shortcut on your desktop to the SharePoint site that contains your dashboard items.

Then, double-click the desktop shortcut to open Dashboard Designer.

Click Start, and then click All Programs. Locate SharePoint, and then

clickPerformancePoint Dashboard Designer.

 NOTE     If you are upgrading from Microsoft Office PerformancePoint Server 2007 to

PerformancePoint Services in Microsoft SharePoint Server 2010, the previous version of

Dashboard Designer will not work. Make sure that you remove the previous version of

Dashboard Designer from the Start menu. To do this, click Start, and then click All

Programs. Locate Microsoft Office PerformancePoint Server 2007. Right-

click Dashboard Designer, and then click Delete.

What kinds of dashboard items can I create by using Dashboard Designer?

You can use Dashboard Designer to create a wide range of PerformancePoint items, such as

data sources, dashboards, scorecards, key performance indicators (KPIs), indicators, filters,

and reports.

The following table summarizes these items:

ITEMS DESCRIPTION

Data Sources

Data sources are your connections to the databases that you use for the scorecards, reports, and filters that you create by using Dashboard Designer.

Dashboar Dashboards are the containers that you use to display your scorecards and reports. When you assemble dashboards, you add reports, scorecards, and

©2009 Microsoft Corporation.

ds filters to zones, which are sections in a dashboard page.A single dashboard can contain more than one page. You can design each page by using the same page layout template, or you can use different templates. You can also customize the sizes of the dashboard zones, and each zone can contain one or more items, such as reports, scorecards, and filters.

Scorecards

Scorecards are dashboard items that show performance for one or more metrics. They compare actual results to specified goals and express the results by using graphical indicators. A scorecard resembles a table that usually has Target and Actual value columns and several KPIs.

KPIs KPIs are metrics that you use in a scorecard. KPIs typically include target and actual values, and graphical indicators that show whether performance is on or off target.

Indicators Indicators are graphical symbols that are used in KPIs to show whether performance is on or off target.Commonly used indicators are stoplight symbols, which use green circles to indicate that performance is on target, yellow triangles to indicate that performance is not far off target, and red diamonds to indicate poor performance.

Filters Filters are individual dashboard items that enable dashboard users to focus on specific information.For example, you might create a Geography filter and then connect that filter to a report or a scorecard. This enables a user to view information for a specific geographical region.

Reports Reports are dashboard items that display information in charts or tables.You can create a wide variety of reports by using Dashboard Designer. Examples include bar charts, line charts, pie charts, and tables, which are known as grids. In addition, you can create some reports directly in Dashboard Designer, and you can create Web Parts to display existing reports that are hosted on other servers.

WHERE ARE MY DASHBOARD ITEMS STORED?

All your PerformancePoint dashboard items are saved in designated SharePoint lists and

document libraries that are set up when PerformancePoint Services is configured. The

following image shows a list of SharePoint lists and document libraries that you will typically

see in PerformancePoint Services:

©2009 Microsoft Corporation.

The following table describes these SharePoint lists and libraries, where your dashboard

content and other files are stored.

ITEMS DESCRIPTION

Data Connections

The data sources that you use for your KPIs, scorecards, reports, and filters are saved in a Data Connections document library that contains data sources together with additional information, such as server and security settings.This document library is typically called Data Connections, but SharePoint administrators can change its name when they configure PerformancePoint Services.

Individual dashboard elements, including:

IndicatorsKPIsScorecardsReportsFiltersDashboard pages

Scorecards, reports, filters, dashboard pages, and other dashboard items are saved in a PerformancePoint Content list. NOTE     All dashboard pages are stored in the PerformancePoint Content list. However, live dashboards that have been deployed to a SharePoint site are also stored in a different document library, which is called Dashboards.This list is typically called PerformancePoint Content, but SharePoint administrators can change its name when they configure PerformancePoint Services.

Dashboards After you deploy a dashboard, it is saved in a Dashboards document library that contains only dashboards. Individual dashboard items are not stored here.This list is typically called Dashboards, but SharePoint administrators can change its name when they configure PerformancePoint Services.

©2009 Microsoft Corporation.

Files and other miscellaneous documents

Other kinds of files, documents, and so forth are saved in a Documents document library. The items that are saved here are not typically items that you use in your dashboards, but can include additional information that users might find helpful. In addition, dashboard users can export some kinds of dashboard items to Microsoft PowerPoint or Microsoft Excel, and then store those files in the Documents library.

Because dashboard items are saved directly to SharePoint Server, you and other dashboard

authors can save time and effort by reusing items. For example, you can create an analytic

chart and then use that report in multiple dashboards.

You can also copy and paste dashboard items, and then make changes to the copied items.

In addition, you can control who can view or use your dashboard content by assigning

SharePoint permissions to individual dashboard elements.

 NOTE     In order to view and assign SharePoint permissions, you must have Full Control or

Site Administrator permissions. If you do not have the necessary permissions, you will not be

able to view or edit permissions for any dashboard items, including the items that you

create. Contact your SharePoint administrator for more information.

How do I navigate Dashboard Designer?

The Dashboard Designer user interface includes a ribbon, a Workspace Browser pane, a

center pane, and a Details pane that you use to create, view, and edit dashboard items.

The workspace also includes the Microsoft Office button menu that you can use to save your

workspace files, deploy a dashboard, and change your server connection.

THE RIBBON

The ribbon includes the Microsoft Office Backstage button and three tabs: the Home tab,

the Edit tab, and the Create tab.

©2009 Microsoft Corporation.

The Microsoft Office Backstage button

Click the Microsoft Office button to access Dashboard Designer settings and other Save

options. There, you can also view workspace files that you recently created or saved.

Click Designer Options to open the Options dialog box. The Options dialog box includes

three tabs: Personalize, Server, and Resources.

Use the Personalize tab to specify the default location for your workspace files and

whether to use wizards to create your scorecards.

Use the Server tab to view or change the server that you connect to when you use

Dashboard Designer.

Use the Resources tab to find out which version of Dashboard Designer you are using.

©2009 Microsoft Corporation.

The Home tab in the ribbon

The Home tab includes toolbar commands that you can use to view and open dashboard

items.

For example, in the Workspace section of the Home tab, you click Refresh to refresh the

list of dashboard items that have been published to SharePoint Server.

The Edit tab in the ribbon

The Edit tab includes toolbar commands that you can use to change dashboard items that

you or other dashboard authors have created.

The Edit tab is dynamic. It displays only the toolbar commands that are specific to the

particular dashboard items that you want to edit. That is, the Edit tab changes according to

the type of dashboard item that is open in the center pane of the workspace.

For example, if you open a KPI, the Edit tab displays toolbar commands that enable you to

change number formats, such as changing the number of decimal places that are displayed

in numeric values.

If you open a scorecard, the Edit tab displays various toolbar commands that you can use.

They include Update. Use the Update command to refresh the information that is

displayed after you have made changes to your scorecard.

If you open an analytic grid for editing, the Edit tab displays various toolbar commands that

enable you to change the font, number, report view, and other settings.

And, if you open a dashboard for editing, the Edit tab displays toolbar commands that are

specific to working with dashboard zones or items within zones.

For some dashboard items, such as filters, the Edit tab has no toolbar commands. For those

items, use the Editor and Properties tabs in the center pane of the workspace to make

your changes.

The Create tab in the ribbon

The Create tab includes toolbar commands that you use to create your dashboard items.

Each toolbar command opens a wizard that guides you as you create an item. For example,

when you click Dashboard, the Select a Dashboard Page Template dialog box opens.

You select a page layout template for the first page of your dashboard, and then you start to

assemble your dashboard.

©2009 Microsoft Corporation.

THE WORKSPACE BROWSER PANE

The Workspace Browser pane is located on the left side of the screen in Dashboard

Designer. You use the Workspace Browser pane to view, open, and save dashboard items.

You also use the Workspace Browser to deploy your dashboards. The Workspace

Browser contains two categories of dashboard items: PerformancePoint Content,

and Data Connections.

Select PerformancePoint Content to create, view, or open indicators, KPIs, scorecards,

reports, filters, and dashboards

Select Data Connections to create, view, or open data sources.

The Workspace Browser uses right-click functionality to perform many tasks. For example,

when you create an item and you want to save it, in the Workspace Browser, right-click

the item, and then click Save.

Similarly, to deploy a dashboard, in the Workspace Browser, right-click the dashboard,

and then click Deploy to SharePoint.

THE CENTER PANE OF THE WORKSPACE

You use the center pane to view, create, and change dashboard items. The center pane

changes, depending on where the focus is in the Workspace Browser. For example, when

you click PerformancePoint Content or Data Connections in the Workspace Browser,

you see the SharePoint and Workspace tabs in the center pane. And, when you click a

specific item in the Workspace Browser, you see two, three, or four tabs in the center

pane. Those tabs vary according to the type of dashboard item that you are working on.

The SharePoint and Workspace tabs

The SharePoint and Workspace tabs are available when an item is selected in

the Workspace Browser. You use these tabs to view lists of dashboard items that you and

other dashboard authors have created.

TAB DESCRIPTION

The SharePoint tab

The SharePoint tab displays a list of the dashboard items that you and other dashboard authors have saved to SharePoint Server. Depending on whether PerformancePoint Content or Data Connections is selected in the Workspace Browser, you can either see all the data sources or all the other kinds of dashboard items that are available displayed in the center pane.

The Workspac

The Workspace tab displays a collection of dashboard items that are saved to SharePoint Server. In particular, the Workspace tab displays dashboard items

©2009 Microsoft Corporation.

e tab that you have created or opened for editing.

When you first open Dashboard Designer, you are working in an untitled, unsaved

workspace file. As you create and open dashboard items, those items become visible on

both the SharePoint tab and the Workspace tab in the center pane.

When you save your workspace file, you create a list of dashboard items that you can then

view on the Workspace tab. You can change which items are included in your workspace

file by using the toolbar commands that are available in the Workspace section of

the Home tab in the ribbon.

 IMPORTANT    Dashboard items are always saved directly to SharePoint Server, and not to

your computer. However, when you save your workspace file (this is optional), the

workspace file is saved to your computer.

The Editor, Properties, Design, Query, Time, and View tabs

 NOTE    You use the Editor, Properties, Design, Query, Time, and View tabs to

configure or change individual dashboard items. These tabs are available when an item is

selected in the Workspace Browser, or when you are creating a dashboard item. Not all

the tabs listed below are available at the same time for a particular dashboard item. Only

the tabs that apply to that item are visible in the center pane.

THE PROPERTIES TAB

The Properties tab is available for all types of dashboard items. You use theProperties tab

to specify an item's name, description, owner (referred to as Person Responsible), and the

display folder for that item in its SharePoint list or document library.

 NOTE    In Dashboard Designer, you can create and use display folders for your dashboard

items. In the SharePoint lists and document libraries that contain your dashboard items,

those display folders are listed in a Display Folder column. You use that Display

Folder column to filter and group your dashboard items together.

THE EDITOR TAB

The Editor tab is available for most types of dashboard items. They include the following:

Dashboards

Scorecards

KPIs

Filters

Indicators

Reports (except analytic charts and grids, which have the Design tab)

©2009 Microsoft Corporation.

You use the Editor tab to add or change the data that you use in your dashboard items. In

addition, you can use the Editor tab to preview some types of dashboard items, such as

scorecards and reports.

THE DESIGN TAB

The Design tab is available for analytic charts and grids. You use the Design tab to add or

change the Analysis Services data that you use in your analytic chart or grid. You can also

use the Design tab to preview your report.

THE QUERY TAB

The Query tab is available for analytic charts and grids. You use the Query tab to view,

write, or change the Multidimensional Expressions (MDX) query that is used to display

information in your analytic report.

 IMPORTANT    When you create your analytic chart or grid by using a custom query, your

report will not be interactive. That is, your dashboard users will be unable to explore data by

drilling up or down to see higher or lower levels of detail in your report.

THE TIME TAB

The Time tab is available for your data sources. You use the Time tab to configure a data

source to work with Time Intelligence by specifying time period levels, such as years,

months, or days.

THE VIEW TAB

The View tab is available for some types of data sources, such as tabular data sources. You

use the View tab to preview your data or to specify column definitions.

THE DETAILS PANE

The Details pane is located on the left side in Dashboard Designer. The Details pane is

only visible when you are creating, viewing, or modifying a specific dashboard item. That is,

the Details pane is only visible when a specific dashboard item is selected in

the Workspace Browser.

You use the Details pane to add or change the content that you display in a dashboard

item. The items that are available in the Details pane vary according to the dashboard item

that you are working on.

For example, when you have an analytic chart or grid open, the Details pane lists items,

such as dimensions, measures, and named sets. These items are available in the SQL Server

Analysis Services cube that is used by that report.

When you have a scorecard open, the Details pane lists KPIs, metrics, aggregations,

dimensions, and other items that are relevant to that scorecard.

©2009 Microsoft Corporation.

©2009 Microsoft Corporation.