Ghada 2 IoT Mounting Ceiling surfaced (SFD) Suspended (SSD) Light source LED Optical system Deep lenses (LDE) Medium lenses (LME) Medium wide lenses (LMW) Corridor lenses (LCO) Wiring Electronic control gear FIX/DALI (ECG/EDA) Materials Housing: die-cast alum. + sheet steel Cover: transparent hardened glass Lenses: PMMA Safety wires Net lumen output (at Ta = 25 °C) LDE 19,650 - 27,800 lm LME 19,650 - 27,800 lm LMW 19,450 - 27,500 lm LCO 18,800 - 26,600 lm Power consumption 134 - 217 W System efficacy 118 - 149 lm/W Dimension (L x W x H) 485 x 636 x 129 mm Weight SFD 15.3 kg SSD 14.6 kg A definitive LED industrial luminaire with impressive parameters that can resist tough weather conditions. With its lifetime of up to 100,000 hours, reliable operability at high temperatures, a wide range of lumen outputs, excellent efficacies, and high IP and IK ratings, you will soon see the real value of this powerful luminaire. Wide ambient temperature range through the use of high-power LEDs instead of temperature sensitive mid-power LEDs. Quick installation and service: - plug-in pre-installed power connector - provided - toolless exchangeable driver box - exchangeable LED modules Flexibility in lighting design is achieved by different lighting distributions suitable for both industry and retail applications. UV stable hardened glass protects the LED and optical system against unnecessary damage caused by dust or contact with the outside environment. The glass can be easily maintained, it is resistant against chemicals and does not change the light properties through the entire lifetime of the LED. DATA GENERATING PART Surface finish Housing: black RAL 9005 (B05) Service lifetime 100,000 hours/L90/B10 (ta 25°C) Ambient temperature From -40 °C to +55 °C
Net lumen output (at Ta = 25 °C) LDE 19,650 - 27,800 lmLME 19,650 - 27,800 lmLMW 19,450 - 27,500 lmLCO 18,800 - 26,600 lmPower consumption134 - 217 WSystem efficacy118 - 149 lm/WDimension (L x W x H) 485 x 636 x 129 mmWeightSFD 15.3 kgSSD 14.6 kg
A definitive LED industrial luminaire with impressive parameters that can resist tough weather conditions. With its lifetime of up to 100,000 hours, reliable operability at high temperatures, a wide range of lumen outputs, excellent efficacies, and high IP and IK ratings, you will soon see the real value of this powerful luminaire.
Wide ambient temperature range through the use of high-power LEDs instead of temperature sensitive mid-power LEDs.
Quick installation and service:- plug-in pre-installed power connector - provided- toolless exchangeable driver box- exchangeable LED modules
Flexibility in lighting design is achieved by different lighting distributions suitable for both industry and retail applications.
UV stable hardened glassprotects the LED and optical system against unnecessary damage caused by dust or contact with the outside environment. The glass can be easily maintained, it is resistant against chemicals and does not change the light properties through the entire lifetime of the LED.
DATA GENERATING PART
Surface finishHousing: black RAL 9005 (B05)Service lifetime100,000 hours/L90/B10 (ta 25°C)Ambient temperatureFrom -40 °C to +55 °C
THE MANUFACTURER CONTINUES TO DEVELOP PRODUCTS THROUGHOUT THEIR LIFETIME. THEREFORE, THE COMPANY RESERVES THE RIGHT TO MODIFY MATERIALS, COMPONENTS, AND TECHNICAL PARAMETERS WITHOUT NOTICE. LUMINOUS OUTPUT AND ELECTRICAL LOAD HAVE AN INITIAL TOLERANCE OF +/- 10 % FROM NOMINAL. FAILURE OF ONE LED LIGHT POINT WITHIN A LUMINAIRE DOES NOT IMPAIR FUNCTIONAL PERFORMANCE AND SO IS NOT CLASSIFIED AS REASON FOR COMPLAINT.
Light and movement sensor
Occupancy detector designed for high-bay warehouses
• One potential-free (dry) contact • Version as Master device • Detection area can be extended with
Slave devices • Easy operation with remote control
(required) • Manual switching via push-button
possible • When used in high-bay warehouses,
care should be taken that, in the cross-aisles of the warehouse, detectors are installed that can detect movement only in the desired aisle locations, by using blinds or other technical arrangements.
• Factory settings 3 min and 1000 lux
DALI Sensor
The lighting control system consists of a small, lightweight sensor and controller, designed for easy integration into lighting systems. It is a true Plug and Play solution for open plan or cell offices. It is used in a master/slave lighting concept, easy to use and install.
Lighting Control Sensor
The bright sunlight raises the overall light level in the rooms of a building. The sensor will detect this, and the system will reduce the energy levels supplied to the lamps. As day becomes evening, the system will respond to the lower levels of ambient light by increasing the energy provided to the lamps. By profiling the building (measuring the daylight contribution per room), the system can be used to maintain an approximate constant light level, and thereby reduce energy use. Lighting control sensor is mounted ouside the building. The unit head assembly is waterproof, installed and mounted vertically.
CO Alarm
The Carbon Monoxide Alarm is a standalone battery unit, powered by 10 year life sealed lithium cell. This means you won’t need to replace the battery at any point in the life of the alarm and also that the battery can not be removed ensuring continued protection. This alarm also makes it possible to add in technology when you insert the module, meaning that you can link all the alarms together. It is possible to download a report, which contains data such as alarm activations, carbon monoxide levels reached, background levels of Carbon Monoxide and battery life.
Why luminaires are so important for the infrastructure of IOT SMART SOLUTION?
Positioning of lighting fixturesLighting system creates uniform infrastructure
for ideal distribution IoT components.
Electric connectivity ready in advanceLighting system is standard distributor of electricity needed for IoT components.
Suitable for data acquisitionLighting system is installed in each area using
a different applications.
Uniform design with integrated IoT components
All IoT components are part of lighting system without interfering features.
Simple implementation of new featuresRight lighting system enables
the implementation of new features in time.
Regular servicesCommon administration and services of
all systems in one place.
ON REQUEST FOR PROJECT
LMW Beam angle 66°The luminaire with the widest light curve is suitable for illuminating of large spaces. It can also be installed at lower mounting altitudes, but when the light output is correctly selected. The light curve guarantees the best uniformity of light in the space.
LDE Beam angle 30° The narrow light curve is suitable for applications up to the highest mounting heights. Its goal is to illuminate the largest floor area. We do not recommend it at low mounting heights. Light is a great solution to illuminate shelves in a store where light illuminates the aisles between them and the light is not lost there.
LME Beam angle 53°The medium light curve of the luminaire is suitable for applications where we want to illuminate a space without aisles and shelves. We recommend its installation for manufacturing parts and above production lines, and so on.
LCOBeam angle 103°, 24°Special light curve corridor is designed for special illumination of aisles between shelves, narrow spaces and similar applications, where the correct turning of light is needed. We do not recommend using the light in open space due to light s uniformity.
