+ All Categories
Home > Documents > GhentPDFOutputSuite5 EFI Fiery proServer and...

GhentPDFOutputSuite5 EFI Fiery proServer and...

Date post: 12-Mar-2018
Category:
Upload: trandien
View: 240 times
Download: 0 times
Share this document with a friend
2
Ghent PDF Output Suite 5.0 Working with EFI Fiery ® proServer and Fiery XF SEPTEMBER 14, 2016 © Copyright 2016 | ELECTRONICS FOR IMAGING INC 1 of 2 HOW TO The Ghent PDF output Suite 5.0 is supported by Fiery proServer and Fiery XF 6.0 and above. Please follow the instructions below for a successful output. To download the Ghent PDF Output Suite, please visit: http://www.gwg.org/workflow-tools/test-suites/ghent-output-suite/ Step-by-step: 1. Log into your Fiery XF Client with administrative rights. 2. Go to the System Manager. 3. Create a new workflow. 4. Select “Proof” as the type of application. Then select “Altona Test Suite 2.0” as the template name. Click the “Load” button. 5. Double-click the workflow name to change it when needed.
Transcript

Ghent PDF Output Suite 5.0 Working with EFI™ Fiery® proServer and Fiery XF

SEPTEMBER 14, 2016 © Copyright 2016 | ELECTRONICS FOR IMAGING INC 1 of 2

HOW TO

The Ghent PDF output Suite 5.0 is supported by Fiery proServer and Fiery XF 6.0 and above. Please follow the instructions below for a successful output.

To download the Ghent PDF Output Suite, please visit: http://www.gwg.org/workflow-tools/test-suites/ghent-output-suite/

Step-by-step:

1. Log into your Fiery XF Client with administrative rights.

2. Go to the System Manager.

3. Create a new workflow.

4. Select “Proof” as the type of application. Then select “Altona Test Suite 2.0” as the template name. Click the “Load” button.

5. Double-click the workflow name to change it when needed.

SEPTEMBER 14, 2016 © Copyright 2016 | ELECTRONICS FOR IMAGING INC 2 of 2

6. Connect your new workflow to the desired users and output device.

7. Go to Job Explorer and import the files you want to process into the new workflow.

8. Print the files.

Additional information:

More information on EFI Fiery proServer and Fiery XF is available at: http://www.efi.com/products/inkjet-printing-and-proofing/fiery-for-inkjet/.

For more information on how to upgrade Fiery proServer or Fiery XF to the latest version, please contact your EFI representative or Fiery Wide Format Certified Reseller.


Recommended