Gilbert Electrical SystemsHARMONIC FILTERBANKS
HARMONIC FILTERBANKS HARMONICS create many problems on customer’s systems such as:• Transformer overheating and abnormal heating of other Equipment. • Transformer failure or life reduction. • Excessive Capacitor problems and capacitor fuse failures • VFD and or motor drive operation problems or damage. • Motor overheating and excessive voltage distortion. • Possible relay and metering problems. • Utilities and industrials turn to us to address harmonics and the associated problems that harmonics create
• Gilbert Electric has been analyzing, designing, and manufacturing harmonic filters since 1983.
• Typical applications range from 480v through 35 KV • Harmonics can cause the following:
– Abnormal Heating of Equipment– Transformer overheating. Transformer failure or life reduction. – Excessive capacitor fuse failures. Capacitor problems. – Equipment operation problems or damage. – Interference to communications. – Excessive voltage distortion. Possible relay and metering problems.
• Harmonic filters can typically be designed to reduce harmonics by detuning the system to reduce harmonic amplification.
• Properly sized harmonic filters will also usually change the power factor to somewhere in the range of .95 to .99 as well for substantial power bill savings.
• We manufacture our own iron core or air core reactors custom tuned to the customer’s specific needs.
GILBERT Capacitor / Harmonic Filter Banks
ELGIN POWER SOLUTIONS: 15 KV, 3 STAGE METAL ENCLOSED FILTERBANK FOR LARGE INDUSTRIALS
REDUCE HARMONIC DISTORTION & IMPROVE POWER FACTOR AT THE SAME TIME.
HIGH PASS HARMONIC FILTER FOR OIL & GAS PLATFORM
IRON CORE 3 PHASE HARMONIC REACTORSTUNED & PACKAGED TO YOUR SPECIFIC NEEDS