01227 783222 WWW.PARKERTOOLS.CO.UK
Lindapter Official Distributors
Girder Clamps
Hollo- Bolts®
FloorFixings
Decking Fixings
SupportFixings
Fully Certified
NOW IN STOCKHUGE RANGE AVAILABLE
Call to request your FREE catalogue
INTRODUCTORY LOW PRICES
Offers valid from 01/09/18 - 31/10/18
SAVE UP TO 35%
HexagonalThe Hollo-Bolt collar and head of the Grade 8.8 bolt are evident above the surface of the steel section.
The Benefits
Approvals
The Range
THE ORIGINAL EXPANSION BOLT FOR STRUCTURAL STEELThe Hollo-Bolt® eliminates the need for conventional through-bolting or welding of structural hollow section (SHS) or any steel structure where access is only available from one side.
Countersunk (Bolt Head)For minimal visible protrusion, the countersunk bolt head features a Grade 10.9 countersunk bolt with a special collar to accommodate the entire head so that drilling countersunk holes is not necessary.
Flush FitFor zero visible protrusion, the innovative Flush Fit Hollo-Bolt is entirely concealed within the countersunk hole once installed, a perfect solution for architects!
Fastinstallation
Lower labour costs
One SideInstallation
For all steel hollow sections
No welding required
High shearresistance
High clamping force
Aestheticallypleasing
2 01227 783222 WWW.PARKERTOOLS.CO.UK
Safe Working Loads(5:1 Factor of Safety)
SizeType HBFF / Flush Fit JS500 Clamping
ThicknessInstallation
Nut Tensile Single Shear
Brand Ref Stock No Price mm A/F mm kN kN
M8 x 50 HBFF08-1 193-25-16 £5.50 10 - 27 19 4.0 5.0
M8 x 70 HBFF08-2 193-25-24 £6.88 27 - 45 19 4.0 5.0
M8 x 90 HBFF08-3 193-25-32 £8.40 45 - 64 19 4.0 5.0
M10 x 50 HBFF10-1 193-25-40 £6.50 12 - 27 24 8.5 10.0
M10 x 70 HBFF10-2 193-25-57 £7.25 27 - 45 24 8.5 10.0
M10 x 90 HBFF10-3 193-25-65 £8.73 45 - 64 24 8.5 10.0
M12 x 55 HBFF12-1 193-25-73 £7.50 12 - 30 30 10.5 15.0
M12 x 80 HBFF12-2 193-25-81 £9.49 30 - 52 30 10.5 15.0
M12 x 100 HBFF12-3 193-25-99 £15.05 52 - 74 30 10.5 15.0
SizeFlush Fit / Installation Tool
Brand Ref Stock No Price
M8 HBFF08KEY 193-26-07 £8.00 M10 HBFF10KEY 193-26-15 £8.00 M12 HBFF12KEY 193-26-23 £8.00
Safe Working Loads(5:1 Factor of Safety)
SizeType HB / Hexagonal JS500 Type HB / Hexagonal HDG Type HBCSK / Countersunk JS500 Clamping
Thickness Tensile Single Shear
Brand Ref Stock No Price Brand Ref Stock No Price Brand Ref Stock No Price mm kN kN
M8 x 50 HB08-1 193-19-63 £3.25 HB08-1HDG 193-21-93 £3.95 HBCSK08-1 193-23-91 £4.69 3 - 22 4.0 5.0
M8 x 70 HB08-2 193-20-03 £5.48 HB08-2HDG 193-22-19 £5.63 HBCSK08-2 193-24-09 £6.34 22 - 41 4.0 5.0
M8 x 90 HB08-3 193-20-11 £5.92 HB08-3HDG 193-22-27 £6.15 HBCSK08-3 193-24-17 £6.82 41 - 60 4.0 5.0
M10 x 55 HB10-1 193-20-29 £3.95 HB10-1HDG 193-22-35 £4.45 HBCSK10-1 193-24-25 £5.45 3 - 22 8.5 10.0
M10 x 70 HB10-2 193-20-37 £5.92 HB10-2HDG 193-22-43 £6.40 HBCSK10-2 193-24-33 £6.62 22 - 41 8.5 10.0
M10 x 90 HB10-3 193-20-45 £6.91 HB10-3HDG 193-22-50 £7.08 HBCSK10-3 193-24-41 £7.49 41 - 60 8.5 10.0
M12 x 60 HB12-1 193-20-52 £4.45 HB12-1HDG 193-23-00 £5.85 HBCSK12-1 193-24-58 £6.57 3 - 25 10.5 15.0
M12 x 80 HB12-2 193-20-60 £7.43 HB12-2HDG 193-23-18 £7.74 HBCSK12-2 193-24-66 £8.12 25 - 47 10.5 15.0
M12 x 100 HB12-3 193-20-78 £8.31 HB12-3HDG 193-23-26 £9.11 HBCSK12-3 193-24-74 £9.12 47 - 69 10.5 15.0
M16 x 75 HB16-1 193-20-86 £6.50 HB16-1HDG 193-23-34 £7.25 HBCSK16-1 193-24-82 £8.29 12 - 29 21.0 30.0
M16 x 100 HB16-2 193-20-94 £8.34 HB16-2HDG 193-23-42 £9.41 HBCSK16-2 193-24-90 £9.44 29 - 50 21.0 30.0
M16 x 120 HB16-3 193-21-02 £9.96 HB16-3HDG 193-23-59 £10.92 HBCSK16-3 193-25-08 £10.47 50 - 71 21.0 30.0
M20 x 90 HB20-1 193-21-10 £11.50 HB20-1HDG 193-23-67 £14.50 - - - 12 - 34 35.0 40.0
M20 x 120 HB20-2 193-21-51 £18.65 HB20-2HDG 193-23-75 £20.08 - - - 34 - 60 35.0 40.0
M20 x 150 HB20-3 193-21-69 £19.98 HB20-3HDG 193-23-83 £21.27 - - - 60 - 86 35.0 40.0
(HCF) High clamping force
Sizes M16 and M20, known as the Hollo-Bolt® (HCF), feature a High Clamping Force mechanism to produce three times more clamping force than the same sized product without the mechanism.
LINDAPTER HOLLO-BOLT®
TYPE HB - HEXAGONAL - BZP+JS500 - HDG - CSK
LINDAPTER HOLLO-BOLT® TYPE HBFF - FLUSH FIT - BZP+JS500
LINDAPTER FLUSH-FITINSTALLATION TOOL
From
£5.50each
From
£3.25each
Buy Hollow Sections Online
Square, Circular, Rectangular
Additional Services• Straight or mitre cut• Drill holes added• Part marking• Shotblast & Prime
Visit ParkerSteel online or contact our sales team todayTel: 01227 783333
FURTHER DISCOUNTS AVAILABLE BULK ORDERS & BOLT LISTS - CALL FOR DETAILS
3
Approvals include:CE Mark, Lloyd’s Register & TÜV approved.
The Benefits
Type CW
Type P1/P2
Type W
Mild steel, zinc plated / hot dip galv
PACKING PLATESFULL RANGE OF PACKING PIECES:
Additional options, prices and availability are available online
GIRDER CLAMP THE ULTIMATECONNECTION CONCEPTLindapter products provide a faster, cost-effective alternative to on-site drilling or welding and are designed to reduce installation time and labour costs. A high strength, permanent (or temporary) connection is quickly achieved by clamping two steel sections together.
£ £
£
£ Save time and money Clamping two steel sections together avoids time consuming welding or conventional drilling and bolting.
High strengthLindapter clamps are manufactured from high strength materials to resist high load requirements and harsh environments.
kN
AdjustableQuickly align steel sections by sliding the section into the correct position before tightening the Girder Clamp to complete the installation.
Industry leading approvalsLindapter has earned a reputation synonymous with safety and reliability, gaining multiple independent approvals.
xSafer connectionsOn-site drilling and welding is avoided, removing the need for hot work permits and encouraging safer site conditions.
4 01227 783222 WWW.PARKERTOOLS.CO.UK
This adjustable High Slip Resistance (HSR) clamp is easy to install and provides high load capacities even in low temperature environments. Hot dip galvanised as standard.
Lindapter’s standard clamp is used to resist moderate tensile loading. Can also be used with Type B in a Girder Clamp configuration.
Size BrandRef
(Vmm) Tail Length HDG BZP
S M L
M8 A08 - 4 - £0.90 £0.69
M10 A10 4 5 7 £1.84 £1.41M12 A12 4.5 6 9.5 £2.60 £2.00M16 A16 5.5 8 11 £3.60 £2.77M20 A20 7 10 12.5 £5.44 £4.20M24 A24 9 12 16 £12.86 £9.88
Heavy duty clamp offering the highest load capacities of all Lindapter’s High Slip Resistance clamps. Hot dip galvanised as standard.
The flat-top version of Lindapter’s standard clamp, for moderate tensile loading. Can also be used with Type A in a Girder Clamp configuration.
Type A
Type B
Type AF
Type AAF
LINDAPTER GIRDER CLAMPSTYPE A / TYPE B / TYPE AF / TYPE AFF
From
£4.39each
From
£7.35each
From
69Peach
From
£1.06each
Buy StructuralSteel Onlinewww.parkersteel.co.uk
Visit ParkerSteel.co.uk or contact our sales team today
Tel: 01227 783333
• Over 20,000t in stock• Straight or mitre cut• Custom drill holes• Shotblast & Prime
ParkerSteel are leading suppliers of structural steel across a majority of the South of England
v
v
(V) Tail LengthS: ShortM: MediumL: Large
(V) Tail LengthS: ShortM: MediumL: Large
(V) Tail LengthS: ShortM: Medium
(V) Clamping Range
Size BrandRef
(Vmm) Tail Length HDG
S M
M12 AF12 5 12.5 £4.39
M16 AF16 8 15 £7.70M20 AF20 10 18 £9.99M24 AF24 15 30 £23.62
Size BrandRef
ClampingRange HDG
M12 AAF12 5 - 26 £7.35
M16 AAF16 6 - 30 £11.02M20 AAF20 6 - 40 £17.86
Size BrandRef
(Vmm) Tail Length HDG BZP
S M L
M8 B08 - 4 - £1.38 £1.06
M10 B10 4 5 7 £2.58 £1.98M12 B12 4.5 6 9.5 £3.26 £2.51M16 B16 5.5 8 11 £5.02 £3.87M20 B20 7 10 12.5 £8.10 £6.22M24 B24 9 12 16 £14.61 £11.24
Buy online at parkertools.co.uk or call our sales team
5
FLOOR FIXINGSA range of innovative fixings for securing steel flooring to the supporting steelwork without the need for on-site drilling or welding. Access to the underside of the flooring is not required, eliminating the need for costly scaffolding or elevated floors. Installation can be carried out quickly and safely from above, often by one person, significantly reducing costs.
A high strength floor fixing for rectangular open bar grating, providing superior clamping force due to a malleable iron cast body. Lloyd’s Register Type Approval for resistance to shock and vibration
Grating Bar
Depth
Grating Bar
Width
BarDistance
SizeType GF - Grate Fast
Brand Ref Stock No Price MM MM MM
M8 GF081 193-57-66 £4.29 22-38 5-10 19-48
M10 GF10HDG2 193-57-74 £2.79 20-50 3-7 25-45
M10 GF210HDG2 193-57-82 £3.29 19-40 3-6.5 30
1) Supplied with socket head cap screw.
2) Supplied with hex head screw.
Material:Top Hat: Stainless steel grade
304 (GF08 only).
Mild Steel, hot dip galvanised
(GF10HDG & GF210HDG only).
Body:
GF08 / GF10HDG
GF210HDG
Malleable iron, Sheraplex (GF08 only).
Malleable iron, hot dip galvanised
(GF10HDG & GF210HDG only).
Type GF
LINDAPTER GRATE FASTTYPE GF
Approved
From
£2.79each
Buy Mesh &Treadplate Online
• Open mesh flooring / stairtread• Durbar floor plate / stairtread• Aluminium 5bar treadplate
• Cut to size • Custom drill holes
Visit ParkerSteel.co.uk or contact our sales team todayTel: 01227 783333
6 01227 783222 WWW.PARKERTOOLS.CO.UK
INVISIBLYSECURETREAD PLATE
Type FFAn innovative fixing for connecting chequer plate flooring to supporting steelwork. The stepped clamping face locks
under the steelwork to provide a secure connection.
LINDAPTER FLOOR FASTTYPE FF
Flange Thickness
Bolt min 4.61
Brand Ref HDG BZP
FloorplateThickness Standard With Ferrule
mm mm 10mm 20mm 30mm
M8 FF08 - £3.91 4.5-12 3-15 13-25 23-35 33-45
M10 FF10 £5.08 £3.91 5-12 3-15 13-25 23-35 33-45
M12 FF12 £4.28 £3.28 6-12 3-15 13-25 23-35 33-45
1) Hot dip galvanised M10 and M12 versions are supplied with a slotted countersunk screw.
2) To order FloorFast with a ferrule, simply add ferrule size to product code.
• Superior clamping force from the cast body.
• Lloyd’s Register Type Approval for resistance
to shock and vibration.
• Zero protrusion above the surface of the floor plate.
• Available in malleable iron or stainless steel grade 316.
From
£3.91each
(M10 and M12 only)
THE ULTIMATEFLANGE CLAMP
Type FL
LINDAPTER FLANGE CLAMPSTYPE FL
Flange Clamp suitable for use with parallel or tapered flange beams, supplied with the back hole drilled or tapped. The type FL uses a grade 8.8 cup point setscrew for secure grip.
From
£2.30each
Brand Ref DrilledHole (Y)
Tapped Thread (Y)
Clamping Range (W) Drilled Tapped
Drilled Tapped
FL106D FL106T 7 M6 3 - 17 £2.30 £2.46
FL108D FL108T 9 M8 3 - 17 £2.30 £2.46FL210D FL210T 11 M10 3 - 19 £2.52 £2.65FL312D FL312T 13 M12 3 - 23 £2.86 £3.00FL412D FL410T 13 M10 3 - 28 £3.07 £2.98
Y
W
Buy online at parkertools.co.uk or call our sales team
7
Lindapter Decking Fixing Compatible Composite Decking Profile(s)
Type TR60 Structural Metal Decks (SMD) TR60+ and TR80+
Type MF Composite Metal Flooring (CMF®) MetFloor® 60 and MetFloor® 80
Type MW2 - Multiwedge 2
Kingspan® Structural Products Multideck® 60 and Multideck® 80
Type AW - Alphawedge
Hare Decking (formerly Richard Lees®) Ribdeck® E60
Type SD2 - Slimdek 2
Tata Steel® Europe ComFlor® 225
Type VN Fits several profiles including: R51 (SMD), ComFlor® 51 (Tata Steel®), Holorib® (Hare Decking), Superib® (Hare Decking), Multideck® 50 (Kingspan®) and MetFloor® 55 (CMF®)
Type TC - Toggle Clamp
Designed for: Service suspension from pre-cast hollow core slabs (minimum core depth of 75mm) as well as Structural Hollow Section (SHS), steel sheeting or purlins.
Also available
Components
Product ComparisonThe table below shows the various components that are designed to fit the decking profiles of major manufacturers such as Composite Metal Flooring (CMF®), Kingspan® Structural Products and Structural Metal Decks (SMD).
DECKING FIXINGS
FULL RANGE / SIZES & PRICINGAVAILABLE ONLINE
VISIT PARKERTOOLS.CO.UK OR CALL THE TEAM
8 01227 783222 WWW.PARKERTOOLS.CO.UK