Glass Pearl PigmentsFor coatings, plastics and graphic arts
ECKART offers a new range of glass pearl pigments under the
brand name LUXAN. These products are based on artificial glass
substrates and complement our well known PHOENIX mica based
pearl pigments.
LUXAN glass pearls show high transparency due to very smooth
and optically perfect surfaces. These pigments exhibit outstanding
brightness and reflecting power that lead to distinct flashy and
clear colour stylings.
LUXAN Glass Pearl Pigments for plastics, coatings and graphic arts
LUXAN Modification Particle Size Range Pearlescent Lustre Effect
C001 rutile 15 – 60 µm
Silver
C261 rutile Interference Blue
D001 rutile 20 – 100 µm
Silver
D393 – Combination Gold
E001 rutile
35 – 150 µm
Silver
E221 rutile Interference Gold
E241 rutile Interference Red
E261 rutile Interference Blue
E271 rutile Interference Green
F001 rutile 80 – 450 µm Silver
The following products are available:
ECKART GmbH
Guentersthal 4
91235 Hartenstein, Germany
Tel +49 9152 77-0
Fax +49 9152 77-7008
www.eckart.net
ECKART America Corporation
4101 Camp Ground Road
Louisville, Kentucky 40211, USA
Tel +1 502 775-4241
Fax +1 502 775-4249
Toll-free 877 754 0001
www.eckart.net
ECKART America Corporation
830 East Erie Street
Painesville, Ohio 44077, USA
Tel +1 440 954 7600
Fax +1 440 354 6224
Toll-free 800 556 1111
www.eckart.net
ECKART Asia Ltd.
12/F, Asia Orient Tower
33 Lockhart Road, Wanchai
Hong Kong
Tel +852 2926 2932
Fax +852 2882 5366
www.eckart.net
2/May2011.3 PL/CO/GA
99153zz
With compliments
This information and our technical advice – whether verbal, in writing or by way
of trials – are given in good faith but without warranty, and this also applies where
proprietary rights of third parties are involved. Our advice does not release you
from the obligation to verify the information currently provided – especially that
contained in our safety data and technical information sheets – and to test our
products as to their suitability for the intended processes and uses. The applica-
tion, use and processing of our products and the prod ucts manu factured by you
on the basis of our technical advice are beyond our control and, there fore, entirely
your own responsibility.