s
150 years of Siemens in the glass industry
Innovative by Tradition
Trends in the glass industry
Case studies
Partners
Products und technologies
ideas for glass production and glass machinery
GlassFocusSeptember 2006
English edition
Trends in the glass industry
Case studies
Partners
Products und technologies
150 years of Siemens in the glass industry
Innovative by Tradition
GlassFocus 2006
Glass Cutting
16 Investing in the future on the BosphorusProfessional glass cutting with Sinumerik 810D andfully integrated user interface
Further Processing
18 More Than Drilling and MillingMaximum flexibility and short cycle times thanks to Simotion D
Totally Integrated Automation
24 State-of-the-Art PackagingProcess optimization and modernization with Simatic PCS 7 at Vetropack
Totally Integrated Automation
26 The Right ChoiceQuinn Glass selects Siemens to equip new glass plant
International Projects
28 Repeat SuccessAsahi Glass benefits from international project expertise
Totally Integrated Power
31 All-In-One PowerIntegrated solution brings new Bulgarian glass plant online
Totally Integrated Power
32 Power UpSaint-Gobain Belgium awards major project to Siemens
Asia
33 A Bright FutureSiemens-Luoyang cooperation nets promising first results
TRENDGlass industry
4 Innovative by TraditionSiemens – partner of the glass industry
CASE STUDIESFloat Glass
6 Fast StackerHigh-Speed Stacking with Simotion D
Hollow glass8 Future-Safe Bottle Production
Simotion D in the hollow-glass industry
Hollow glass9 Hard to Break
Totally Integrated Automation in insulator line in China
Hollow glass10 Clear Advantages for Complex Requirements
Simotion and Sinamics control IS machines
Hollow glass12 Fit for Retrofitting
Sinamics S120 for group drives
Glass Cutting13 Maximum Accuracy for Batch Size 1
The new all-rounder for milling architecture and automotive glass
Further Processing14 Everything under control
Glass grinding with Simatic S7-300 and Simatic MP270
Laser Scribing15 High-Precision Cutting for Everyday Needs
Laser scribing is conquering the cell phone display market
Siemens has been an active player in the glassindustry for 150 years – an additional incentive forSiemens to continually prove itself as an expert,innovative, and reliable partner to the glass industry
Grenzebach uses Simotion D to controlhigh-performance stackers for float glass
4 6 9
The manufacturing line forglass insulators designed byWALTEC employs integratedSiemens drive technology
CONTENT2
Vetr
opac
k
Gre
nze
bach
GlassFocus 2006
Dear readers,This year Siemens is celebrating a special
anniversary: 150 years in the glass industry –
not only as an innovative and reliable partner in
the equipping of glass factories, but also, which
far fewer people actually know, as a glass
producer. We therefore have firsthand
knowledge of what it takes to be successful in
the fiercely contested international glass market.
The fine opportunities – for example, the
large demand for glass for automobiles, the
building industry, and the food and beverage
industry in Asia and Eastern Europe, or rapid
growth sectors such as ultrathin glass – are
countered by intense competition and increasing
cost pressure. Glass manufacturers are faced
with the challenge of reliably producing the
required quality with optimum exploitation of all
resources.
Innovative technologies for quality assurance
and process control, which we also develop for
the glass industry together with our partners,
can open up new potential for rationalization.
We, the Siemens Glass Team, support our
customers – glass manufacturers, further
processors, system planners (EPCs), machine
manufacturers (OEMs), and engineering
consultants supplying the industry worldwide –
with an extensive and innovative product
portfolio, tailor-made solutions, and our
experience and expertise in the glass industry.
From America to Asia and from Europe to
Australia and Africa, we are close to our
customers, together with our partners, who use
our products and solutions for tailor-made glass
systems and glass machines that allow them to
optimize production and further processing.
We show you how our customers benefit from
working with Siemens and our partners in a few
selected examples in this issue – from page 6 on
for glass machine construction and from page 21
on for glass production. We hope these case
studies will give you a few valuable ideas.
Bernhard SaftigSiemens Glass Team
Head of the Glass Competence Center
Ralph BurgstahlerSales/Marketing
Automation Glass Processing Machines
Totally Integrated Automation38 Smooth Transition
Totally Integrated Automation at Saint-Gobain in Herzogenrath
SOLUTIONSHollow glass
12 Controlled motion into the lehr Lehr loader upgrade with Simotion D425
Power supply30 Power Package
Integrated solutions for power supply systems
PARTNERGlass Processing
17 Optimized Glass CuttingFully integrated user interface for stand-alone cutting tables
Glass industry35 Growing Together
Siemens partner network aligns skills and expertise
Glass industry36 Stable, Long-Term Relationship
STG and Siemens: Successful partnership for theglass industry
19 PRODUCTS
34 SHORTLIST
39 DIALOGUE
Asahi Glass Co., Ltd., the world’s leading glassmanufacturer, and Siemens have been workingtogether successfully to equip glass works allaround the world
28
3EDITORIAL
WA
LTEC
Asa
hiG
lass
Co.
,LTD
.
for the glass industry: Float glass as animportant base material for windows andfaçade elements, glass blocks as a redis-covered design element, and fiberglass asan insulation material are among the mar-ket sectors clearly experiencing growth. Inaddition, young markets with stronggrowth, such as ultra-thin glass, are show-ing strong momentum. On the other hand,increasing international competition andgreater use of substitution products likePET and cartons are increasing price pres-sures in the traditional markets of the glassindustry. This is particularly noticeable inthe hollow-glass sector.
In an increasingly globalized market,glass producers and processors need part-ners who can provide global advice andsupport on a worldwide scale. Therefore,technology is only one part of the Siemensportfolio for the glass industry. To provideits customers in the glass industry with thesupport they need to achieve their aims,Siemens has packaged its expertise in theCompetence Center Glass, which tailorssolutions and products to meet customerand market needs. The Siemens Glass Teamcoordinates all activities for the glass indus-try worldwide, aligns them with the widerange of Siemens solutions, and regularlyexchanges its experiences. Thus, Siemensis able to ensure that its customers in theglass industry always receive the best pos-sible solutions.
Committed to tradition
Despite its scientific curiosity and innova-tion, Siemens is proud of its traditionalvalues – and with good reason. For its cus-tomers in industry and infrastructure, theprimary focus of Siemens is establishingsustainable partnerships and a highdegree of reliability. Customer confidencein the company, its portfolio, and its relia-bility is crucial to Siemens’ commercialsuccess – a fact recognized back in 1884 byWerner von Siemens when he wrote in aletter to his brother Carl, “I will not sell thefuture for today’s profit.” That mottoapplies just as much today as it did then –particularly in Siemens’ relations with theglass industry. g
Established more than 150 years agoas a small, two-man workshop,Siemens is now one of the largest andmost successful companies in theglobal electronics industry. Lessknown, however, is that Siemens hasa long history not only as a supplier ofelectrical and electronic systems tothe glass industry but also as a glassproducer and still produces glasstoday in one of its businesses. Thistradition is a strong incentive forSiemens to continually prove itself asan expert, innovative, and reliablepartner to its customers in the glassindustry.
Werner Siemens established a jointventure in Berlin with mechani-cal engineer Johann Georg
Halske. Named Telegraphen-Bauanstaltvon Siemens & Halske. This joint venturehas developed into a global corporationthat is active in more than 190 countrieswith over 420,000 employees. Less known,while his brother Werner was establishinghis business, Hans Siemens founded aglassworks in Dresden that, thanks to inno-vative technologies and ideas, was to revo-lutionize the world of glass production.Production continued almost uninter-rupted into the 20th century. As a co-founder of its subsidiary Osram, Siemensstill produces more than 90 percent of theglass used in lightbulb production there.
Technology for the glass industry
Continuing its long and and close associa-tion with the glass industry, Siemens isdriven to create technological innovations
More information:www.siemens.com/glass
in the areas of automation, drive, andenergy. For more than 50 years, Siemenshas worked closely not only with leadinginternational glass manufacturers but alsowith machine builders, engineering com-panies, and technology partners to developand implement leading-edge, effectivesolutions for the challenges facing the glassindustry.
For this purpose, Siemens has alignedits wide portfolio of solutions for indus-tries in an Industry Suite dedicated to theglass industry. The Industry Suite Glassoffers an integrated and seamlessly inter-operating range of products, systems, andservices for almost all power and automa-tion requirements of the glass industry –whether in float glass, hollow glass, fiber-glass, monitor glass, or consumer glass,from machine control to manufacturingexecution, from process instrumentationand analysis to process control systems.The Industry Suite Glass also includes solu-tions for product and material logistics,process optimization, and power supply.
Totally Integrated Automation (TIA) andTotally Integrated Power (TIP) form the coreof the Siemens Industry Suites, serving asthe basis for customer and industry-spe-cific solutions in automation and energysupply. TIA and TIP provide glass manu-facturers and glass machine producers withmany benefits. The high level of standard-ization reduces the time to commissioning,simplifies servicing and maintenance, andcuts implementation costs.
Partnership, trust, and commitment
With booming markets in Asia and easternEurope on the one hand and extreme costpressures in the established markets on theother, the glass industry recognizes thatspeed and efficiency are crucial. The con-struction industry is an important stimulus
GlassFocus 2006
5
Siemens – partner of the glass industry
Innovative by Tradition
the position of the glass pane is measuredexactly and any skew is corrected. In clockedmode, a clocked ram at the end of the beltpresses the pane down and at the same timeslides interrupt the air current. The pane isthen pressed down onto a packet table. Incontinuous mode, the pane does not stopbut the clocked ram is activated at a definedposition and the pane is released from theair current. When the packet of glass panesis complete, it is transferred to a swing rake,which swings it to a robot. The robot sets itdown on a glass rack.
Many axes controlled on a distributed basis
Thirty axes must be controlled in this com-plex mechanical process, and all mustinteract perfectly. Grenzebach thereforechose the drive-based Simotion D445,which already has a Sinamics S120 inte-grated as a regulating module, for the pro-
totype. The most efficient member of theSimotion family is predestined for distrib-uted use in high-performance multiaxismachines. Grenzebach chose Simotionbecause, among other reasons, the close-to-drive solution needs no master con-troller. This criterion is important for thecompany because the stacker is offered notonly as part of a line but also as a stand-alone machine. In the American cuttingline, a Simatic S7-400 takes over the linecontroller, and Profinet links Simotion andthe periphery.
The safety aspect is also important infast clocked systems. To prevent accidentson the running machine, the ET 200S-IM151-7F-CPU intelligent peripheral mod-ule is linked to Simotion via Profibus. A fail-safe PLC is already integrated into this vari-ant, which controls the safety-relevantswitches in the safety fence and the emer-gency stop circuits.
GlassFocus 2006
6Float Glass
CASE STUDY
High-Speed Stackingwith Simotion D
FastStacker
Grenzebach Maschinenbau GmbH has developed a high-performancestacker for flat glass that handlespanes of different sizes flawlessly. The distributed solution of Simotion Dand Sinamics S120 enables theimplementation of an unloading unitthat removes the glass panes gentlyand quickly from the transport line.
When it comes to material flow sys-tems for the flat-glass industry,the name Grenzebach stands for
trend-setting technologies. The latestexample from this company based in south-ern Germany is a high-speed stacker that isused especially in the American glassindustry. Panes of different finished sizesare produced on the cutting line – fromwindow glass to automobile glass to build-ing glass. The demands on the stacker aretherefore high. The smaller the panes, thefaster the stacker has to cope with the vol-ume. The large number of panes to betransported on the line also requires a veryefficient device.
The stacker operates either in clockedmode or continuous mode. A completebatch of glass panes is transferred from theconveyor belts of the glass line to the rollertrack. There a fan generates an air currentthat sucks the panes onto a belt. On the belt,
Short cycle times, perfect stacks, and gentle handling of the glass panesare the distinguishing features of the high-speed stacker from Grenzebach
Compelling prototype
To be able to produce a prototype beforeGlasstec 2006, Grenzebach needed anautomation system that could be imple-mented quickly. The decision to equip thestacker with Simotion D and Sinamics S120was made because Siemens created testsoftware in the shortest possible time thatmet all the company’s requirements. Themachine manufacturer is very pleased withthe scalable, modular concept that wasimplemented by close cooperation betweenGrenzebach and Siemens. Because of thepositive experience with the prototype, themain line will also be changed over fromMasterdrives to Simotion and Sinamics inthe future. g
GlassFocus 2006
7
Simotion – ideal for mechatronicsolutions in the glass industry
The Simotion motion-control systemunites motion control, PLC, andtechnology functions in one system.The many application possibilities forSimotion range from simple speedgoverning to complex multiaxismachines in which numerous individ-ual axes must be put into operation.Simotion is therefore the ideal controlsolution for glass machines.
Another strength of Simotion is itsscalability. With the Profibus isochro-nous bus system and Ethernet-basedProfinet with IRT, multiple Simotioncontrollers can easily be synchronized.The number of synchronized axes maybe well above 100 with the bus cycletime still a millisecond. The user canchoose between three differentplatform versions, depending on thesystem requirements and personalpreference: the drive-based versionSimotion D, the controller-basedversion Simotion C, and the industrial-
PC version Simotion P.
The Scout engineering system
enables engineering of motion
control, logic, and technology tasks in
one integrated system and provides all
the necessary tools. Functions range
from programming to
parameterization, and from the
commissioning of the control and
drives to easy diagnosis of faults. With
Scout, the user also gets graphic
support for hardware and network
configuration, as well as a graphic
programming language (Motion
Control Chart, MCC). In addition to
MCC, the high-level Structured Text
(ST) language is available for the logic
programming, as are contact plans
(KOP) and function plans (FUP). The
runtime software is flexible and
scalable due to reloadable technology
functions.
Moreinformation:www.siemens.com/glasswww.siemens.com/simotion
Gre
nze
bach
Siem
ens
AG
technologies, machines, and systems forthe hollow glass industry installed thedrive-based Simotion D435 version, inwhich the entire motion-control function-ality is integrated directly into the regulat-ing module of the multiaxis Sinamics S120drive, for the machine’s motion control andlogic functions. The 1FK7 compact servomotors with their robust resolver encodersprovide the ideal supplement to the driverange.
The most important function of Simo-tion in the hollow glass manufacturingprocess is operating the electronic cam pro-files. These allow the shears to be con-trolled by a high-precision motion-controlsystem, and the downstream units can besynchronized with the clock of the shears totake over the glass gob for further process-ing at the right time. The exact movementof the cam profiles guarantees a constantgob size – which is indispensable for opti-mizing quality and productivity in the man-ufacture of hollow glass. Different gobforms can be created for different products.With Simotion, the machine axes can becontrolled and accurately synchronizedwith a single system. In addition, only oneengineering system is required, whichreduces training and commissioningeffort.
Integration into the existingautomation environment
Ease of operation is guaranteed by thelocally installed, Windows CE-based TouchPanel TP 270 or a master visualization sys-tem. Thanks to built-in interfaces such asEthernet and Profibus, almost unlimitedoperation and visualise is possible. Simo-tion D is linked to the main control and thedistributed Simatic ET 200M periphery viathe standard Profibus DP bus system. Openinterfaces and possibilities for expansion,such as the communication modules for ET200M, allow easy integration into the exist-ing automation environment.
The system is already operating suc-cessfully in numerous machines, and thispositive experience is encouraging Heye toautomate more and more parts of the sys-tem with Simotion D. g
Simotion D in the hollow glass industry
Future-Safe BottleProductionHollow glass specialist Heye International uses the drive-basedSimotion D variant on the IS machine as a feeder drive and conveyerdrive for the discharge of the glass bottles. The Simotion motioncontrol system is perfect for optimum synchronization of the largenumber of axes and is also easy to integrate with existing systems.
Heye has switched over toSimotion D435 for more
productive manufacturingof glass bottles
GlassFocus 2006
8Hollow Glass
CASE STUDY
The shears are the central componentof an IS machine and play an impor-tant role in the quality production of
hollow glass. The glass gob created by theplunger is cut off precisely by the shears. Inthe next process step, the gob distributorpasses on the gobs to the sections wherethey are shaped into bottles. These aretaken over by a conveyer system and trans-
ported to the lehr loader, which feeds theminto the annealing lehr. Highly precisemotion control with absolute reproducibil-ity is necessary for this.
Simotion brings enormous advantages
Heye International GmbH in Oberkirchenhas automated its IS machine with Simo-tion. The internationally active provider of
More information:www.siemens.com/glasswww.siemens.com/simotion
Hey
e In
tern
atio
nal
Gm
bH
The 30-meter-long production linethat the glass machine specialistWALTEC has developed for the Chi-
nese market begins with an electronicfeeder/shears system. That is were theplunger doses the glass, which has a tem-perature of approximately 1,100°C, cycli-cally into ten molds located on a rotaryindexing table. In this process step, twoservo-controlled Simovert MasterdrivesMotion Control (MC) frequency convertersensure that two different gob weights canbe precisely dosed one after the other atidentical cycle times. The electronic camdisk function integrated into the driveguarantees a very precise and reproduciblegob weight with feeders and shears. Therotary indexing table synchronizes the
movement of the ten molds into thehydraulic pressing station, where the glassitems are formed. Following the pressingprocess, an eccentrically rotating stamp isused to roll a system of grooves into the stillformable glass. The insulators are allowedto cool down to and then kept at a temper-ature of between 500 and 600°C in a gas-heated annealing lehr, as this is the bestpreparation for the subsequent hardeningprocess.
Integrated controller and drives forperfect control
The glass insulators are quenched in thehardening machine by air cooling. Thisproduces a defined internal tension in theglass, which lends extreme stability to the
Totally Integrated Automation in insulator line in China
Hard to BreakWALTEC Maschinen GmbH (formerly J. Walter Co. Maschinen GmbH), based insouthern Germany, recently supplied the power-hungry Chinese market with acomplete line for glass insulators. To ensure that the insulators can withstandhigh environmental stress and are safely within the required power ratingslimits, the glass must be carefully treated and hardened. This thermallysensitive process places the highest demands not only on the process control,but also on the precision of the controller system.
9CASE STUDYSpecial Glass
insulators. The insulators are then cooledon 20 rotating plates, each with a dedicatedspindle driven via a separate axis. Since thisrequires only speed control, WALTEC usesthe distributed Micromaster 440 drives forthis task. Due to their sophisticated vectorcontrol, the Micromaster drives ensure thehighest possible motion control quality –even with sudden load changes. All axes aswell as the main drive for the rotary index-ing table and the furnace line are driven viathe modular Simodrive 611 converter sys-tem. This comprises feeder, control, anddrive modules, which can be combined inindividual drive formations and rapidly tai-lored to the drive rating of and number ofaxles on the respective machine. All drivescommunicate via Profibus DP.
To control the complex and time-criticalprocesses on the temperature-sensitiveline, WALTEC requires a system in which allcomponents interact optimally. A SimaticS7-318 serves as the central controller, as itis able to work at full capacity in ambienttemperatures of 40 to 50°C during 24-houroperation. The user is able to simply enterthe parameters for the individual plantcomponents on the Simatic MultipanelMP370 graphical display.
Once the glass insulators have passedthrough all the hardening stages, they areso strong that they could withstand a fallfrom a height of two meters without break-ing. g
Shock cooling with air: the glassinsulators receive their high stabilityin the annealing machine
The drives for the many axes of theplant use Simodrive 611 converters
More information:www.siemens.com/glasswww.siemens.com/motioncontrol
All
pict
ure
s: W
ALT
EC
GlassFocus 2006
C ontinuous operation in harsh pro-duction conditions, with extremelyhigh performance standards – the
requirements on machine and process con-trollers in glass container production aredemanding and, for a long time, could onlybe met using special control engineering.Sklostroj Turnov CZ s.r.o., one of theworld’s leading manufacturers of containerglass machines, is setting new standardsfor productivity by offering the Simotionmotion control system as an option along-side the existing control engineering on itslatest generation of IS (individual section)machines. In the glass industry, there is anincreasing tendency towards replacingmechanically coupled motions and appli-cation-specific control engineering withstandardized mechatronic solutions.
Ideal for glass: Simotion
Simotion offers benefits especially whenreal-time requirements such as e-timing,
motion control and logic need to be dealtwith simultaneously. The system is just asreliable and real-time capable as the con-ventional technology. And that is not all. Atthe hot end of container glass production –molding – factors such as throughput,availability and robustness are critical. Inaddition, there is a trend towards usingmechatronic drives for functions that wereonce reserved exclusively for pneumaticdrives, demanding even more performancefrom the controller. As a result, an increas-ing quantity of real-time I/Os with more andmore electrical drives need to be co-ordi-nated. High-precision motion control withabsolute reproducibility is mandatory.
Simotion’s scalability means that onlyone system is needed for all aggregates atthe hot end. Simotion ensures that theplunger forms even gobs, the shears havea high dynamic response, work extremelyaccurately and cut at the right moment andthat the gob distributor reliably supplies all
Simotion and Sinamics control IS machines
Clear Advantagesfor ComplexRequirements
Sklostroj increasedproductivity in container
glass production byswitching to Simotion
and Sinamics
GlassFocus 2006
10Hollow glass
CASE STUDY
The glass industry is increasinglyreplacing application-specific controlengineering with mechatronicsolutions that increase productivity.The Czech company Sklostroj TurnovCZ c.r.o. has recently introduced theSimotion and Sinamics automationand drive platforms on its ISmachines. Thanks to its real timecapability and scalability, the systemis ideal for controlling complex multi-axis machines in container glassproduction.
to 50 percent to be compensated with noeffect on machine productivity. As a result,optimum system availability can beachieved despite power supply fluctua-tions. The Simotion CPU is powered by anuninterruptible 24 volt Sitop power supply.In case of a power supply failure, this cancontrol the system until it can be shut downsafely.
The Sinamics S120 system concept alsoreduces downtimes. As all data for a groupof drives is stored on a single CompactFlash memory card, a programming deviceis not necessary when replacing a Sinamicscomponent. The firmware, program andparameters are automatically read from theCF card as soon as power is restored to thedrives.
The new automation and drive technol-ogy allows Sklostroj to make significantcost savings in terms of training and spareparts storage. For example, in the PCS 7process control system the ET200M periph-eral components are used for melting andfor batch conditioning. Meanwhile, theworldwide Siemens support networkensures a rapid service response. g
sections. The sections highlight anotheradvantage of Simotion – the pneumatic andservo-electrical aggregates are combinedinto a single control system. As a result, theadvantages of electrical motion control, interms of reproducibility and reduced wearon molds and aggregates are combinedwith simple and cost-effective pneumatics.Finally, the conveyor belts and servo feed-ers are also perfectly synchronized.
Proven in everyday operation
The new Simotion system is beingemployed for the first time on an ISmachine that will be used to form bottles inRussia. Sklostroj will only be using stan-dard components that demonstrate provenexcellence in other sectors. “We use thedrive-based Simotion D435 for axis controland as the e-timer (electronic cam controlsystem) for all sections,” explains Rolf The-mann M.B.A., Technical Director atSklostroj. “This compact design makes itparticularly attractive for us because thecontrol module is directly integrated intothe Sinamics S120 drive yet simultaneouslycontrols the entire distributed real-time I/Operipherals.”
The Simotion controllers communicatewith one another and with the distributedSimatic ET 200M peripherals via ProfibusDP using the motion control profile. This isideal for precise synchronization of multi-ple axes and achieves reproducibility inthe microsecond range. Communicationbetween the Simatic WinCC SCADA system
and the individual controllers is via Indus-trial Ethernet. A separate SQL server is con-nected to the WinCC system via OPC forrecipe management.
Service personnel can access themachine controller on a robust mobile PCfrom any location using an encrypted con-nection. The PC has a wireless connectionto the controller via a Scalance W WLANswitch.
The Profibus system reduces both theamount of wiring required and the numberof interfaces on the machine, thus mini-mizing susceptibility to faults. Central datamanagement simplifies product optimiza-tion and preventive maintenance. OpenProfibus DP and Ethernet interfaces allowthird-party systems to be integrated. Thisflexibility has a positive impact on opera-tion, as process data, messages and alarmsignals can be sent to a superior controlleror process control system for analysis andarchiving. In the future, Sklostroj is plan-ning to implement Profinet with IRT(isochronous real-time), which enableseven more streamlined bus solutions byrunning operator and control data on thesame bus system.
Maximum system availability
The Sinamics S120 family represents anoptimum solution in regions with a weakmains power supply. The active infeedshave a stabilized DC link set to 600 volts.This allows short-term voltage drops of up
More in formation:www.siemens.com/glasswww.siemens.com/simotion www.siemens.com/sinamics
All
pict
ure
s:P.
Koer
ber
The latest generation of IS glass molding machines with49 servo axes is controlled with Simotion D
A servo-driven inverter reduces wear in the section
GlassFocus 2006
11
Sheppee International Limited, aBritish supplier of hot glass containerhandling systems, is currentlydeveloping a prototype lehr loaderunit designed to provide moreaccurate glass transport controlduring the manufacturing process.Whereas previous system generationshad relied on a variety of mechanicaland electronic drive systems, the newmodel features a Simotion D425motion control system.
W ith well over 50 years of experi-ence in the industry, SheppeeInternational provides equip-
ment and solutions for customers through-out the world. The newly developed Triflex
T2 3-axis lehr loader pushes rows ofrecently formed hot glass containers offone moving conveyor, through 90°, ontoanother moving conveyor for transport intoan annealing lehr.
Fast and flexible bottle handling
Although Sheppee’s Triflex machines,equipped with electronic drives, have beenin operation for over 12 years, the companyrealized that the control technology haslimits and therefore opted to equip the pro-totype unit of the new T2 model with aSimotion D425. Simotion offers tremen-dous cam design flexibility and very precisemotion control. Optimized axis synchro-nization ensures a high level of motionrepeatability whilst also providingincreased speed and operational flexibility.The energy efficient control system alsooffers Sheppee a future-proof software plat-
form that is easy to install and use. ASimatic OP 177B operator panel with WinCCflexible visualization software was installedto provide the operator with excellent oper-ational flexibility, also enabling users toimmediately conduct diagnostics to aid introubleshooting.
The new Triflex T2 lehr loader isdesigned to achieve higher productionspeeds on any production line, from below100 BPM to well over 700 BPM and cyclespeeds of 1 to 24 machine cycles perminute. The company also notes such ben-efits as the standardized automation plat-form, the worldwide sales and support net-work, remote dial in assistance and reducedspare parts handling. g
Lehr loader upgrade with Simotion D425
Controlled Motion into the Lehr
More information:www.siemens.com/glasswww.siemens.com/simotion
Sinamics S120 for groupdrives
Fit forRetrofitting
G roup drives have a long tradition inthe glass industry. Previously, inorder to ensure the angular syn-
chronism important for the IS machine,several motors were operated on one con-verters. Since the mid-1980s, the Simovertconverter system has controlled angular-locked synchronism using several separateconverters, forming a universal three-phase drive with the Siemosyn synchro-nous motors.
Updating proven machines
It is now possible to easily achieve trans-mission synchronism with motion-controlsystems and the associated wide range of
motors, such as servo motors and compactasynchronous motors. However, when sys-tems are being modernized, retrofitting isfrequently required to retain proven motordesigns and update only the drive-specificcontrollers with the latest technology.
Best suited for this is the Sinamics S120drive system, which controls both asyn-chronous and Siemosyn synchronousmotors at a precise frequency. In associa-tion with the Simotion motion-control sys-tem, sensor-free transmission synchro-
nism is also possible for synchronousmotors via the U/f mode. Control of the syn-chronism is performed by the drive-basedSimotion D425, which also provides theuser with a full-fledged PLC, with the resultthat an additional PLC is no longerrequired. g
More information:www.siemens.com/glasswww.siemens.com/sinamics
Configuration and commissioning tools
Drive-Cliq
Ethernet
Simotion D425
Motormodule
Lehr loader
Crossconveyor
Ware transfer
Machine conveyor
Gob distributor
Shears
Starter
Sizer
Capacitor module
Sinamics S120
Simatic TP 177B
Feeder
Infeed
To other units
GlassFocus 2006
12Hollow Glass
CASE STUDY/SOLUTION
Siem
ens
AG
The Sinamics S120 drive system meets all the requirements of the glass industry
The new all-rounder for architecture and automotive glass
MaximumAccuracy for BatchSize 1
Alternatively, there is an option of import-ing programs created externally.
The system is available in various sizescorresponding to the customer’s productrange. The largest machines can continu-ously machine glass with dimensions ofbetween 400 x 800 millimeters and 3.3 x 7.3meters. The resulting time savings are con-siderable as a new pane can be moved inand positioned while the finished pane isstill being transported to the next process,for example washing. That is where thestrengths of the Sinumerik become evident– the multi-channel capability of the 840Dallows several panes to be processed simul-taneously.
All functions in one compact unit
For milling and grinding, a 12-kilowattmotorized milling spindle is being used forthe first time. This mechatronic unit com-bines Siemens system expertise in controlengineering on machine tools with thelong-standing experience in motorizedspindle construction of Weiss Spindeltech-nologie GmbH. The complete motorizedspindles comprise all mechanical elementssuch as sensors, cooling and tool clampingmechanism. With a variable speed of up to15,000 RPM, the built-in 1FE synchronousmotor ensures a good surface quality forgrinding. Compared to conventional belt-driven solutions, the spindle runsextremely quietly and smoothly.
Benteler Maschinenbau is convinced thattheir innovative machine featuring a com-bination of CNC control and a motorizedspindle provides the optimum solution forflexible machining of flat glass panes. g
More information:www.siemens.com/glasswww.siemens.com/sinumerik
The proportion of contour panes with abatch size of 1 is continuously increas-ing the construction and furniture
glass sector. The new Benteler CNC machin-ing center, an intelligent extension to theproven Benteler portal drilling machineincorporates a range of technical innova-tions that reflect this trend. The glass paneis positioned automatically by the lateralroll guide rail and laser measurement,completely eliminating the need to adjuststops. To ensure secure fixing duringmachining, the individual suckers areselected automatically for each contourpane. The high performance spindle forgrinding, polishing and milling is mountedon a stable portal that can be moved in thedirection of transport, allowing all contourpoints to be reached. To drill the pane, it ismoved into the drilling portal with its twoindependent double-sided drilling spindlesand 20 different pairs of tools.
High speed and accurate processing
The CNC Sinumerik 840D provides perfectcontrol for these complex processes. Theprocessing programs can be created easilyusing the CAD/CAM software from Benteler.
GlassFocus 2006
13CASE STUDYGlass Processing
The motorized spindle includes allmechanical elements, such as sensors,cooling and tool clamping mechanism
With the compact motorized spindle,Benteler can mill even large panes ofglass quickly and accurately
All
pict
ure
s:Be
nte
ler
To reflect the latest developments inthe architectural and automotiveglass sector, Benteler Maschinenbaunow supplies a CNC machining centerthat can perform all machining steps,even on large panes of glass. To meetcustomer requirements for unlimitedflexibility and high performance, thecompany uses Sinumerik 840D and anew motorized spindle speciallydesigned for machining glass.
Glass grinding with Simatic S7-300 and Simatic MP270
Everything Under Control
The customers of the Italian company Z. Bavelloni benefit from a new automa-tion concept that the company has developed in cooperation with Siemens forits double-edge grinding machines. Thanks to the flexible and modular soft-ware, the machines achieve perfect grinding results.
F lat glass processing is an importantfunction of many of the machines inthe extensive product line of Z. Bavel-
loni SpA, a subsidiary of the Finnish KyroGroup. The VX EVO double-edge grindingmachines have been developed usingsophisticated technical solutions in orderto meet all the specific glass processors’needs like for example the ability to pro-cess large panes precisely, as required bythe building industry.
A wide range of models with differ-ent working widths and number ofspindles are available. On a base framewith one fixed and one moving cross-bar, the glass is transported over fourindividually operated high-qualitybelts that are powered by two main-tenance-free 1 FK7 compact syn-chronous motors. Simodrive 611Uconverters are used as the drivesystem. The motors are electroni-cally synchronized, thereby ensur-ing improved synchronizationand greater reliability at lowermaintenance costs than conven-tional drive shaft solutions. Byusing 8, 10, or 11 spindles and anadditional oscillating side spin-dle, the operator is well pre-pared for the most demandingtasks. In addition devices fortools automatic set-up can beinstalled.
High performance paired with versatile functionality
To control the double-edge grindingmachines, Z. Bavelloni chose the SimaticS7-314-C 2DP CPU. The S7 expandabilityenables plant internal network integration,for example, with in-house production andmanagement software. Thus, productiondata can also be easily transferred from aremote location. This is particularly bene-ficial for end customers with larger or mul-tiple sites.Thanks to the flexibility and scalability ofthe Simatic S7 CPU, Z. Bavelloni was able tosignificantly improve the productivity andfunctionality of its innovative grindingmachines. The modular software design ofthe machine enables easy integration offurther machine modules. During opera-tion, the Simatic Multi Panel MP270B offersusers numerous functions to improvegrinding results. For example, users can select step-by-steppart processing with automatic size adjust-ment or adaptation of “standby” stationsusing a preset list. Reading bar codes tooptimize the importing of machine dataand the importing and exporting ofmachine data via the Ethernet card can alsobe performed directly on the MP270B.
The standardized Simatic control archi-tecture ensures optimum cutting resultsand high level of efficiency. It also ensuresthat access to spare parts poses no prob-lems. g
More information:www.siemens.com/glasswww.siemens.com/motioncontrol
GlassFocus 2006
14Glass Processing
CASE STUDY
R.D
egen
kolb
e
GlassFocus 2006
15CASE STUDY
A s a result of its joint venture with theJapanese Mitsuboshi DiamondIndustrial Co. Ltd. (MDI) in mid-
2005, the Mainz-based glass manufacturerSchott AG now offers a wide portfolio ofconventional machines as well as laser cut-ting machines. In the field of laser cutting,MDI Schott AP has gained ground above allin the cell phone display market in the last12 months. Because cell phones are becom-ing thinner and thinner, increasingly thin-ner and therefore stronger displays arerequired. Glass thicknesses of 2 x 0.3 mil-limeters are common, and even thinner dis-plays are being developed.
Schott AP’s “laser scribe and break” tech-nique makes display production morerational and flexible. Displays are producedunder clean-room conditions because eventhe slightest contamination can destroy theglass surfaces that have already beencoated with the electrically active compo-nents. Unlike conventional cutting meth-
ods that generate glass dust, laser scribingworks without contact and therefore with-out dust: a focused CO2 laser beam heats upthe glass along the cutting line, which isthen cooled down again immediately. Nomicrotears occur on the surface duringembrittling and pretensioning of the glass,and there are practically no microparticleswhen the material is broken afterward. Theresulting edge is extremely precise andstrong.
Adjustment to the micrometer
For the automation of the machine, MDISchott AP uses a Sinumerik 840D CNC andthe wear-free, maintenance-free 1FN3 lin-ear motors and 1FW3 torque motors. Thedirect drives meet the requirements ofclean-room class 1000 and interact opti-mally with the Simodrive 611D convertersystem. The high degree of positioningaccuracy and great bonding force that canbe achieved with this drive technology
Glass Processing
A case for laserscribing: cell phonedisplays requireultrathin glass withstrong edges
enable MDI Schott to achieve accurate align-ment of the material to the micrometer. Toachieve a constant cutting depth, the inten-sity of the laser beam is controlled based onthe belt speed.
There is a trend towards using glass as apreferred display material in electronicdevices. For these applications, a strongglass edge is also very important, and thevarying contours make great demands onthe control system. Thanks to its flexibilityand scalability, Sinumerik 840D is also ide-ally suited to these future tasks in terms ofits functionality and performance.
Flexible design
To meet customers’ varied requirements,the machines have a modular structure andcan therefore be combined in individualline solutions or stand-alone processingstations with little engineering effort. Theuniform Profibus architecture, with itsextensive diagnostic functions, is just asimportant to Schott as the compatibilitywith different HMI systems. The companyalso makes individual user interfaces withAsian characters. g
More information:www.siemens.com/glasswww.siemens.com/sinumerik
Laser scribing is conquering the cell phonedisplay market
High-PrecisionCutting forEveryday Needs
All
pict
ure
s: S
chot
t
Clean cut: glass can be cut dust-
free with the laser
MDI Schott Advanced Processing GmbH has developed a laserscribing technique for display manufacture that is far superior tomechanical glass cutting. A key prerequisite for the splinter-free“scribing,” which can be performed in clean rooms, is a veryflexible control and drive technology.
GlassFocus 2006
CMS MAKINE SANAYI VE TICARET A.S.(CMS), which specializes in machinesfor the glass industry, offers a wide
range of products. One of the most impor-tant pillars of the company is the cuttingtables. Whether for windows, furnitureglass, or flat glass products for the building,sanitary, or automotive industry, the FCLOctopus 6032 stand-alone glass-cuttingtable cuts oversized plates into highly accu-rate parts by CNC control.
CNC controlled for a better cut
The desired cutting shape is transferred tothe Sinumerik 810D control, which cuts theglass with a cutting wheel along the rail-
controlled main x- and y-axes. Since, for aperfect result, the cutting wheel, the c-axis,must be guided tangentially to the desiredshape, Sinumerik 810D has an integratedtangential control. At CMS, the “gantryfunction”– the parallel drive in the x direc-tion – compensates the spindle pitch errorsor reverse batches that tend to occur, espe-cially with larger cutting tables. With theaid of the speed-dependent analog outputand the Simatic S7 PLC integrated intoSinumerik, cutting pressure, cutting oil,and cutting speed can be optimally set. The“look ahead” speed control also guaranteesa high cutting speed even over short tra-verse lengths.
The CMS table is also characterized by ahigh level of usability. The operation of allmachines and the optimization of the glasssize cutting take place via an integratedinterface. The Optiplan HMI, made byHANIC, has been specially developed forstand-alone tables and offers intuitivemachine operation and professional cut-ting optimization all in one. The benefit forthe end user: from receipt of the order todelivery, discard glass is largely avoidedand the valuable raw material is used effi-ciently.
Discs cut more accurately and faster
CMS states that since the company beganworking with Sinumerik controllers, thequality of the cut glass panes has increasedsignificantly. Unlike previous solutions,Sinumerik allows the dimensions to be cor-rected and entered into the machine as acorrection. The cutting speed has also beennotably increased, to 130 meters perminute – three times faster than before.The company is delighted with the increas-ing number of orders as a result.
CMS is also relying on the successfulpartnership with the local Siemens salesoffice in Istanbul for other machines suchas insulated glass lines and machines forprocessing safety glass. g
On the stand-alone glass-cutting tables of the Turkish company CMS, jumbo-sized glass plates can be cut into straight or shaped parts with an accuracy of afew tenths of a millimeter. Since being equipped with the modern, compactSinumerik CNC control, the machines cut even more accurately and the cuttingspeed is three times as fast. In addition, a fully integrated user interface thatunites cutting optimization and machine operation makes the new systemextremely user-friendly.
More information:www.siemens.com/glasswww.siemens.com/sinumerik
All
pict
ure
s:C
MS
Professional glass cutting with Sinumerik 810Dand fully integrated user interface
Investing in the Futureon the Bosphorus
CMS uses state-of-the-arttechnology for precision
glass cutting
16Glass Cutting
CASE STUDY
Hanic GmbHHanic GmbH develops software solutions
for the flat-glass industry. With Optiplus,
Optifer, Optwin, and Optiplan, all glass-
relevant processes can be optimized.
Company headquarters:
Josef-Hausmann-Str. 10
D-44866 Bochum-Wattenscheid
Germany
Employees: 29
Founded: 1983
Contact:
Rainer Feuster
Phone: +49 (0) 2327 8369-0
Fax: +49 (0) 2327 8369-1 99
E-mail: [email protected]
GlassFocus 2006
17PARTNERGlass Processing
Fully integrated user interface for stand-alone cutting tables
Optimized Glass CuttingBy optimizing the cutting process, glass manufacturers can use raw glassformats most efficiently and avoid unnecessary scrap. Hanic, a partner ofSiemens for many years, has developed the Optiplan 4 HMI software,which is easy to use even without NC knowledge because it combines thepreviously separate worlds of cut optimization and machine operation ina user-friendly interface.
Cut optimization is a key success fac-tor in glass processing today. Espe-cially with stand-alone glass cutting
tables, the ideal is to perform cut opti-mization directly on a PC at the machine.The partnership between Hanic andSiemens makes this possible. With Opti-plan 4 HMI, Hanic has developed optimiza-tion software that runs on the same hard-ware as the actual human machine inter-face program. Siemens offers controlsystems for this in which the machine oper-ation is PC-based (e.g., Sinumerik 810D,840D), as well as NC and HMI PC-based con-cepts (e.g. Sinumerik 840Di).
The integration of close-to-machineoperation and classic optimization in a soft-ware package provides the machine opera-tor with intuitive, multilingual machineoperation. Complicated handling to loadoptimized cutting data into the NC from a
disk, flash memory card, or data file is nolonger necessary because this takes placefully automatically. If the glass breaks dur-ing cutting, it can be recut immediately.The classic machine control panel has beenreduced to a few hardware keys and isinstead reproduced in the software,enabling easy, multilingual operation. Theuser needs to provide only a few basicinputs to enter the optimizing position ofthe glass panes. The order header data, likebasic data for the position input, are takenfrom the stored master data. After the opti-mizing position has been entered, the glassis immediately available, sorted automati-cally according to type and thickness and inthe form of optimization groups.
The shapes integrated into the modelcatalog of Optiplan 4 HMI are entered ingraphic mode by the user. Important pro-cessing information such as edge process-
ing on rectangles or models as well as freecontours can also be entered, and it is alsopossible to import DXF files. The grindingallowances necessary for cutting are addedto the cutting dimensions.
Maximum glass utilization for every shape
In the automatic optimization of the indi-vidual glass types, it is possible to changecutting-table parameters or other parame-ters such as broken edges or minimumbreaking distances. Hanic achieves a highglass yield by using sophisticated algo-rithms, with the specified restrictions takeninto account. The optimization result is dis-played to the user graphically and containsinformation about the achieved yield orwaste, planned area, number of pieces, andnecessary raw formats. The operator canthen intervene at any time to influence theresult.
Easy machine operation
After the optimization strategy has beenaccepted, the CNC data are generated auto-matically and loaded into the programmemory of the Sinumerik controller. Themachine operator then only needs to pressthe “Start” button and the glass is cut. Themachine operation addresses everythingfrom actual value displays to machine setupmasks to alarm management to simulation.Last but not least, Optiplan 4 HMI isdesigned to be multilingual. It is alreadyavailable in German, English, Chinese,Russian, and other languages. g
More information :www.siemens.com/glass
The simple HMIwith graphiccutting imagedisplay andprogramsimulationenablesintuitiveoperation
Last year, the Italian company Forvet,which specializes in the manufactureof drilling machines, launched a glass-processing machine that can processtwo glass panes simultaneously. TheSimotion D motion-control systemwith Sinamics drives ensures the flexi-bility and speed of the NC machiningstation.
Forvet SRL is a market leader in theglass-processing industry thanks toits inovative ideas and high-tech solu-
tions, along with many years of experi-ence,. The company’s wide range of modelscovers different customer requirementsand glass sizes. A key distinguishing fea-ture of the Forvet drilling machines is thedrill spindle heads with several spindles.With their high-quality components andefficient software, they provide themachines maximum flexibility, which is inhigh demand on the market.
Last year Forvet successfully developedthe Francesca FC 32M 3300 MILL, the only
machine worldwide that can process andremove either one large glass pane (max.3,300 x 8,000 millimeters) or two smallerglass panes (max. 1,600 x 4,000 millime-ters) simultaneously without intermediatesteps. The machine is equipped with 32tools. These are installed in four heads thatcan be operated independently of eachother or parallel in coordination. Simulta-neous processing of the glass panes withfour tools considerably reduces cycle time.
For greater productivity, the FrancescaFC 32M 3300 can be combined with theForvet Chiara grinding and polishingmachine or another two-blade grindingmachine, which doubles the output.
Great flexibility and minimal downtime
The NC machine is equipped with 24axes, and utilizes both servo and standardasynchronous motors. The very compactdesign is achieved with the help of the dou-ble-axis modules of the Sinamics S120drive platform. The “Drive-CLIQ” driveinterface enables distributed design setupas well as fast engineering and efficientservicing. Thanks to the Structured Text
programming language, functions such assynchronous tasks, portal operation andthe execution of special cam profiles areconveniently configured. The operatorinterface, which was implemented usingSimatic WinCC flexible, allows for easy useroperation with several langauges on theSimatic Panel PC 577.
The machine is distinguished not onlyby its enormous flexibility in glass pro-cessing. It also shortens the downtimewhen a “spot job” – a job that has to be exe-cuted within a short time and with shortnotice – needs to be slotted in. The opera-tor can then choose between two options:either to remove a tool from the revolverhead and insert a new one, or to temporar-ily use another revolver head to avoid pro-duction process interruption and therebyrequire less time. All of these work steps areautomatically controled and adjusted withthe help of a Simotion D445 motion controlsystem. g
Maximum flexibilityand short cycle timesthanks to Simotion D
More ThanDrillingand Milling
More information:www.siemens.com/glasswww.siemens.com/simotion
All
Pict
ure
s:Fo
rvet
The new Francesca FC 32M3300 MILL from Forvet can
process glass panes up to a sizeof 3,300 x 8,000 millimeters
GlassFocus 2006
18Glass Processing
CASE STUDY
GlassFocus 2006
19PRODUCTS
Sinumerik solution line
Control Platformfor GlassProcessing
The Sinumerik solution line (sl) control family is the newplatform and ideal solution for glass processing. It consistsof the Sinumerik 802D sl compact panel CNC, the PC-based Sinumerik 840Di sl, and the “flagship,” the universal,drive-based Sinumerik 840D sl. An important property ofthe Sinumerik solution line is its scalability – in terms ofthe hardware, the software, and the area of operation. Thenew controls can therefore be optimally adapted to thevarious machine designs.
The new Sinamics S120 drive system isdistinguished by its scalable powerrange, functionality, and design.
Tiered function packages address all areasof application. The selection of differentdesigns such as internal air cooling, exter-nal air cooling, and liquid cooling open upmany new application opportunities for themachine manufacturer. Extensive possibil-ities for distributed configurations andflexible system structures are available viaEthernet, Profibus, and Drive-Cliq. The con-trols can easily be integrated into systemnetworks via Industrial Ethernet andProfibus. As a result, operation and an inte-grated diagnostics and service function canbe implemented much more flexibly.
The right model for every application
Like its predecessor Sinumerik 802D, Sinu-merik 802D sl is an operator panel controlthat combines NC and PLC control as wellas HMI functions in one device. It can bewired at low cost and commissioned easilyand quickly. Optimum connectivity is guar-anteed by three onboard communicationports: Ethernet to connect to the mastersystems, Profibus to connect to the periph-ery, and Drive-Cliq to connect to SinamicsS120.
Sinumerik 840Di sl is a fully PC-basednumeric control based on the PCU 50.3
Sinumerik 802D sl – the compact panel CNC
Sinumerik 840Di sl – the PC-integrated, flexible system
All pictures: Siemens AG
Sinumerik 840D sl – the flexible, universal system
industrial PC with the Windows XP operat-ing system and the MCI 2 motion-controlinterface board. Both the Sinamics drivesystem and the distributed periphery arelinked by 12-megabaud Profibus DP withmotion-control functionality and real-timecapability. Analog drive interfaces in packsof four are available as an option. Thanks tothe openness of the HMI and PLC, the usercan create individual technology solutions.
The efficient universal solution Sinu-merik 840D sl consists of an NC unit (NCU)with embedded CNC, HMI, PLC, regulation,and communication functions. If higherperformance is desired in the field of HMI,the Sinumerik PCU 50.3 Industrial PC canbe added. A maximum of four distributedoperator panels are operated by oneNCU/PCU at a distance of up to 100 meters.A special strength of the Sinumerik 840D isthe consistent openness of the HMI and NCcore. This enables numerous functionalextensions and can facilitate new areas ofapplication for which automation solutionshave not been available. g
More information:www.siemens.com/glasswww.siemens.com/sinumerik
S12S120
100 Megawatt30 Megawatt
S120 G110 G150/S150 G130 S120 GM150/SM150 G120
G110 S150/SM150 G130 G150/GM150 S120 S120 G120 S120 S120
S120 S120 G110 S150 S120 G130 G150/GM150 S120 SM150G120
S120
SINAMICS for every output rating
SINAMICS for every power range
0.12 kW 1.5 Megawatt
SINAMICS for every application
Coordinated drives/high-performance drives High-performance single drives Single drives
Basic functionality
S120 S120 S120 S120
Motion Control Performance
G_D
211_
EN
_000
98
GlassFocus 2006
20 PRODUCTS
T he intelligent drive systems are espe-cially suitable as an automation plat-form when modular machine designs
need to be implemented. For the inde-pendent scaling of functionality and elec-trical power, the control module and powermodules of the drives must be selectable asseparate modules. The independent dimen-sioning of the power modules allows theflexible scaling of the drive solution to vary-ing load situations, while the engineeringfor very different applications relies on thesame resources, with a uniform controlmodule for all applications. This principleis implemented consistently in the drivesystem Sinamics S120. In distributedautomation topologies, for example, aSimotion D module takes over the controlof the Sinamics S120 axis assembly, whichis then used in place of the Sinamics controlmodule. Control functions and motion con-trol are then also available in addition tothe control directly in the drive.
Simple automation structures and theefficient utilization of existing resourcesdemand the flexible application of intelli-
gence and functionality. The Sinamics S120drive system is tailor-made for this devel-opment because it interacts smoothly withthe machine manufacturer’s favoriteautomation topology, whether industrialPC, controller, or drive-integrated. Wastedresources at the drive level are therefore athing of the past. This flexibility is sup-ported by the automation system. TheSimotion motion-control system covers allthree important hardware platforms – con-troller, PC, and drive – in a broad perform-ance range. In every one of these configu-rations, the machine manufacturer is sup-ported with one consistent toolenvironment, from the development workright through to the remote diagnosis andmaintenance over the whole life cycle ofthe machine.
Real-time communication with Profinet
Profinet, the extensive and open IndustrialEthernet standard, is available as a com-munication standard for distributed intel-ligent automation solutions. It also allowsthe integration of distributed field devices
and, together with component-basedautomation (CbA), forms the basis for dis-tributed intelligence in modular plant con-struction. With Profinet, safety-relatedcomponents can also be integrated easilywith the Profisafe protocol. In addition,field level, control level, and IT level will beeven more closely linked in the future.Profinet relies on a consistently scalablesolution for real-time communication. Thisincludes the time-uncritical transfer of pro-duction data; communication with theperipheral units in real time (RT), withresponse times of 5 to 10 milliseconds; andisochronous real time (IRT), whichdemands cycle times of less than 1 mil-lisecond and jitter accuracies of 1 microsec-ond for time-critical motion control appli-cations. Open IT standards and TCP/IP canbe used simultaneously and unrestrictedlyby the same channel. g
More information:www.siemens.com/glasswww.siemens.com/sinamicswww.siemens.com/profinet
The Sinamics drives are scaled according to power,function, and the complexity of the application
Sinamics and Profinet
Modularityin the DriveAssemblyIn modular machines, drive andautomation functions areincreasingly being designed asdistributed functions. Theintelligence available in drivesolutions can take over more andmore tasks due to increasingprocessor performance, andstandardized Ethernet-basedfieldbuses provide the necessarydata exchange.
Advance Process Control
More Quality andFlexibility
especially for established plants. Advancedprocess control also helps ensure stableprocesses, including the optimized use ofenergy resources, and product quality,which are essential for process optimiza-tion.
In the area of adaptive as well as multi-variable model-predictive control used inadvanced process control solutions,Siemens partners with companies such asTNO, Glass Service, STG, and UAS, imple-menting their expertise in advanced prod-ucts. These advanced methods keep rele-vant variables within the required param-
Pyrometric temperature measurement
Noncontacting Monitoring
ured values even at only 10 percent of theoriginal radiation intensity and trigger asystem alert indicating the fouling prob-lem. This feature monitors the entire meas-ured section between the pyrometer andthe target and operates on a purely electri-cal basis, meaning that no optical attach-ments, moving mechanical components, orexternal additional modules are required.The pyrometer is therefore wear- and main-tenance-free. The Ardocell PS and PZpyrometers with fiber-optic cables (FOC)can be used without external cooling at
Noncontacting pyrometric temperaturemeasuring methods are becoming
increasingly important in the monitoringand optimization of energy-intensive glassmelting and forming processes. However,since pyrometric temperature measure-ment employs an optical measuringmethod, a clean lens and free field of viewfor the pyrometer are prerequisites for cor-rect temperature measurement.
The compact radiation pyrometers of theArdocell and Ardocol series with integratedfouling monitors provide reliable meas-
The Simatic PCS 7 process control systemoffers a consistent and integrated
automation solution for all industries. Inversion 6.1, the process control system hasbeen enhanced and extended with impor-tant features such as integrated asset man-agement and OS Web.
With Web functionality for the operatorstations of the Simatic PCS 7 process con-trol system, processes can be controlled,operated, and monitored directly via theInternet/intranet. The user can access allprocess data through the PCS 7 Web serverfrom the PCS 7 Web client – any PC withInternet Explorer. The Internet Explorer
Simatic PCS 7 Version 6.1
New Web Functionality
More information:www.industry.siemens.com
The Ardocell PS and PZpyrometers with fiber-opticcables can be used without
external cooling at ambienttemperatures of up to 250 °C
Processes can be controlled, operated,and monitored directly viaInternet/Intranet by Web functionality
ambient temperatures of up to 250 °C,thanks to their FOC optics and the steel-encased FOC. This makes the installation ofan expensive and complex cooling watercircuit unnecessary in many cases. g
The greatest challenge that process engi-neers will face in the glass industry lies
in the reduction of variable costs whilemaintaining product quality. Advancedprocess control is the most effective tech-nology available to realize this objective,
display on the client PC corresponds to theuser interface of a conventional operatorstation with an overview and working andkeyboard area. As with an operator station,user-specific access rights can be set for thePCS 7 Web client. All Web client operatingprocedures are logged automatically withthe name of the operator. Up to 50 Webclients can access one PCS 7 OS Web server.This enables remote operation even of com-plex applications. g
More information:www.siemens.com/pcs7
GlassFocus 2006
21PRODUCTS
eters, allow for automated and flexibleprocess operation, obtain predictive andreproducible results, and minimize energyand raw material consumption. These func-tions can be integrated into the SimaticPCS 7 process control system so that bothprocess automation and advanced processcontrol can be operated through the sameinterface. g
More information:www.siemens.com/glass
Siem
ens
AG
Siem
ens
AG
gates. Function blocks are provided for thecommunication with the automation whichis able to read evaluated data of the pic-tures and at the same time send data forautomationto the video system.
For subsequent analysis, the pictureswith the measuring data that is faded in aswell as the orientation guides are saved ina continuous ring buffer. Further archivetools such as search engines, timeline,backup, or access to single pictures allowquick and comfortable editing.
The setup, analysis, and configuration ofthe complete video system is done with aconfiguration station that does not influ-ence running operations.
It is possible to access the video serverwith any PC or notebook via LAN by usingthe ViaCC client software without inter-rupting the running operations. g
The ViaCC video system enables showinglive pictures of all cameras with the top-
roller in the control station forsupervision and control of production
processes in the float area.Simultaneously to the video display pic-
tures, performance data such as flow veloc-ity, temperature, and angle are directlyfaded into the video picture. Due to thedirect interconnection of the automatedsystem, a timely adequate and parallel dis-play of video information and process datais achieved.
The operator has the option to place anypicture markers into the video pictures sothat orientation during the productionprocess is better. As a result, it is possibleto recognize any changes in flowing or posi-tioning faster.
Integrated algorithms which analyze thepictures allow a width measurement whichcan be used to control or readjust the feeder
More information:www.industry.siemens.com
The availability of large-format glasssubstrates plays a key role in the rapidly
growing market for TFT-LCD displays. Qual-ity and yield are critical to the success ofglass and display manufacturers in globalcompetition. The production and process-ing of ultrathin glass with a thickness ofjust a few tenths of a millimeter is particu-larly important. The slightest surface flaws,such as particles, occlusions, and scratches,can later lead to the failure of individualdisplay pixels.
Because flaws that are discovered at theend of the manufacturing process areextremely costly, it is absolutely essential tocheck the glass substrate for flaws beforeprocessing. Siemens offers an opticalinspection system especially designed foruse at the cold end of the ultrathin glass
production process that has a much greaterefficiency than conventional systems andenables detection of glass flaws well intothe submicrometer range.
The sensor, based on a laser scannerwith high-resolution scattered-light detec-tion, picks up surface flaws on both sides ofthe glass substrate as well as occlusions inthe glass. The most prominent feature,apart from the detection of punctiformdefects, is the direction-independent detec-tion of surface scratches. With the system’spatented scan and detection optics, micro-scratches just a few nanometers wide anddeep can be detected reliably in any direc-tion. Distinguishing between defects on thefront and the back is also possible as anoption. The system can be cascaded to testdifferent web widths. g
The new sensor detects glass flawswell into the submicrometer range
GlassFocus 2006
22 PRODUCTS
More information:www.siemens.com/glass
Siglas Top Roller
Live Information Feed
Siglas TFT Inspection
One Hundred Percent Quality
The measured data are displayed directly in the video pictures with ViaCC
Siem
ens
AG
Siem
ens
AG
Siwarex FTA weighing module
Fast, Precise, and Flexible
Siwarex FTA provides calibratable andversatile weighing electronics for
Simatic S7, C7, and PCS 7. It is a componentof the Simatic automation system and theSimatic PCS 7 process control system, so itcan also be linked to a comprehensive man-ufacturing execution system.
By setting a parameter in Siwarex FTA,one of the following scale types can be acti-vated: a nonautomatic weighing instrumentconforming with OIML R76 for tasks such as
Sitrans LU 10 is an ultrasonic long-rangelevel monitor for liquids and solids,
offering 10-point monitoring in a singleunit. Key applications include chemicalstorage, liquid storage, and bulk solidsstorage.
Sitrans F US ultrasonic level-monitoring system
Accurate and Easy to Operate
The calibratable and versatileweighing electronics Siwarex FTA
Sitrans LU 10 for ultrasonic sensors with amonitoring range of up to 60 meters
Sitrans LU 10 has a monitoring range ofup to 60 meters. The patented Sonic Intel-ligence echo-processing software ensuressuperior reliability. g
More information:www.siemens.com/level
23PRODUCTS
Sitrans F R rotary-piston meters are best-sellers. Although millions of them have
been sold over the past few decades, theyhave lost none of their attractiveness. Thebenefits offered by their conventionalmechanical measuring technique include
Sitrans F R rotary-piston meters
Proven Bestseller
Proven measuring technology: Sitrans F R
reliability, precision, and a robust designfor measuring aggressive media and high-viscosity fluids.
That is why rotary-piston meters are stillstandard equipment in the glass industry.For Wiegand Glas, Siemens recently sup-plied 43 Sitrans F R rotary-piston meters tomonitor the flow rate of heavy fuel oil usedas fuel for the melting furnace. g
More information:www.siemens.com/flow
Sitrans LR 400 radar level-monitoring system
For Demanding Tasks
a low dielectric constant. It is virtually unaf-fected by atmospheric or temperature con-ditions within the vessel. g
The Sitrans LR 400 is a long-range FMCWradar level transmitter. It is available as
a liquids version for use in liquid bulk stor-age vessels and as a solids version with anintegral Easy Aimer ball for use with solids.
It provides excellent results even in con-ditions of extreme dust or with liquids with
More information:www.siemens.com/level
Sitrans LR 400 providesexcellent results even
under harsh conditions
More information:www.siemens.com/weighing
GlassFocus 2006
hopper weighing or fill level weighing, or aplatform scale; an automatic gravimetric fill-ing instrument conforming with OIML R61for use as a sacking system scale or fillingscale; an automatic catchweighing instru-ment conforming with OIML R51 for single-component filling and emptying, a multi-component scale, or a static control scale forweight measurement; or a discontinuoustotalizing automatic weighing instrumentconforming with OIML R107, used, for exam-ple, as an emptying or loading scale. g
works altogether, with a total of 17 meltingfurnaces producing more than 3,000 tonsof glass for packaging per day.
In order to consolidate and strengthenits strong position in the market, the grouppursues a double strategy: in addition to itscontinued eastward expansion, it is alsofocusing on the continuous modernizationof its production plants in order to increasecorporate success through optimal utiliza-tion of resources and plants, while simul-taneously protecting existing investments.
With a melting furnace having a servicelife of around 10 years, on average two coldrepairs per year will be required through-out the company. Vetroconsult AG wasestablished within the Vetropack Groupmore than 10 years ago with the purpose ofcarrying out engineering tasks such as themodernization of individual plants and theplanning and commissioning of new melt-ing ends. It is responsible for technicaldesign planning and using its soundprocess expertise to achieve energy sav-
ings, cost-efficiency, and quality improve-ments, and to protect the environment.
Multiple requirements
From the basic specifications of uniformityand traceability, which, years ago, were allthat was asked of a process control systemin the glass industry, a veritable flood ofrequirements has developed: trouble-freeconnection of devices, simple and reliableoperation, complete monitoring of theprocesses, linking to the SAP system, andmuch more. In Simatic PCS 7, Vetroconsulthas found a solution that satisfies theserequirements. This is why Vetroconsult hasbeen using Simatic PCS 7 in its moderniza-tion projects for several years now.
One of these projects was a comprehen-sive modernization in St-Prex in Switzer-land at the beginning of 2006. The produc-tion facility in St-Prex, the birthplace of theVetropack Group, manufactures primarilybottles for domestic wine, spirits, and beerproducers. In conjunction with the upgrad-
In order to retain and strengthen itsposition in the competitive containerglass market, the Vetropack Groupplaces great importance on theconsistent modernization of itsproduction plants. Now that morethan half of the company’s meltingfurnaces have been successfullymodernized with PCS 7, Vetropack isable to reap the benefits: Simatic PCS7 provides a solid, future-proof basisfor optimized process control.
The Vetropack Group, which offers acomprehensive range of glass pack-ages for the food and beverage indus-
try, is one of the largest container glass pro-ducers in Europe. Since the beginning of2006, the company has also operated aglass factory in Ukraine, another majorgrowth market. The group has seven glass-
Process optimization and modernization with Simatic PCS 7 at Vetropack
State-of-the-Art Packaging
GlassFocus 2006
24Totally Integrated Automation
CASE STUDY
ing of the green glass melting furnace, theintroduction of Simatic PCS 7 should alsooptimize the process in order to accommo-date higher energy prices and the statutoryenvironmental protection requirements.
Increased transparency
Ingo Schulz, the Vetroconsult engineerresponsible for the electrical implementa-tion, was able not only to depend on theproven technology of Simatic PCS 7 for themodernization, but also to benefit fromnew functions of the control system usedfor the first time by Vetropack at the St-Prexplant: Web server functionality, sequencercontrols linked with status controls, and acomplete energy evaluation.
All parts of the plant – from the batcharea and the melting furnace, the anneal-ing lehr and fragment removal, to the infra-structure with cooling water and com-pressed air supply – are controlled via astandardized process control system. Thisautomation solution demonstrates the ben-
efits of Totally Integrated Automation. Itprovides all of the required data to the plantoperator and engineers and also facilitatesa precise energy evaluation. This dataforms the basis for process automation –now and in the future.
A powerful partner
Vetropack sought specific support fromGermany for the engineering at its St-Prexplant: a team from STG Cottbus took on theconfiguration, cabinet construction, instal-lation, and commissioning of the processcontrol system. STG is one of Siemens’most experienced technology partners inthe glass industry, having equipped glassplants with Siemens process control tech-nology in more than 20 countries. Those incharge of the project at Vetropack wereenthusiastic about the support, as the STGteam brought with it sound knowledge and,in particular, detailed understanding of allthe glass technology processes, from whichthe plant in St-Prex is now also benefiting.
All
pict
ure
s: V
etro
pack
Moreover, they realized that in STG Cottbusthey have found a partner capable of fullyexploiting all the strengths and innova-tions of Simatic PCS 7. Vetropak is thor-oughly satisfied with the partnership andthe results of the work.
Visible results
At the modernized production plant, mod-ern melting technologies and the increaseduse of recycled glass from the factory’sinternal waste-glass processing plant makeit possible to reduce the NOx emissions andthe discharge of CO2 by around 30 percentwithout changing the melting capacity,thereby effectively improving the life-cycleanalysis at St-Prex. g
More information:www.siemens.com/pcs7
GlassFocus 2006
25
The new meltingfurnace in St-Prex
PCS 7 provides the plant operatorwith all important data
The new plant at Ince includes one of thelargest automated warehouses in Europe,capable of storing 282,000 pallets offilled and unfilled bottles
Quinn Glass selects Siemens to equip new glass plant
The Right ChoiceWith the good results from a previous project as proof of the company’ssystem and project capabilities, Siemens was a strong contender to equip aQuinn Glass Brownfield glass bottle plant at Ince in Great Britain. Anexperienced project team, glass industry expertise, and a redundant systemsolution to ensure continuous plant operation were other factors convincingQuinn Glass to choose Siemens and Simatic PCS 7 once again – a decisionthey have not regretted.
GlassFocus 2006
26Totally Integrated Automation
CASE STUDY
Quinn Glass commenced construc-tion of the new state-of-the-art man-ufacturing plant in Ince, Cheshire,
in September 2003. This Brownfield devel-opment is one of only a handful of plantsworldwide – and the only one in the UK –that manufacture and fill glass bottles onthe same site. Furthermore, the 280 millionPound Sterling investment includes oneof the largest automated warehouses inEurope, capable of storing 282,000 palletsof filled and unfilled bottles.
When Quinn Glass sought a supplier forthe control systems, the first company it
approached was Siemens, as Siemens hadrecently supplied the equipment forQuinn’s new plant in County Fermanagh,Northern Ireland. Nevertheless, for aninvestment of this size, a first-class trackrecord was not enough to ensure Siemens’selection, and Quinn duly considered othersuppliers to ensure it was getting the best.
Plant availability a decisive aspect
In the end, Quinn decided to use Siemensagain. The success of the County Fer-managh project, Siemens’ dedicated teamof engineers with knowledge and experi-
ence operating in the glass manufacturingindustry, the Profibus compatibility, andthe redundant architecture of the Siemenssystems were ideal for this application withits requirement for exceptionally high plantavailability.
As those responsible at Quinn Glass said,Siemens was an excellent supplier on theCounty Fermanagh project, bringing peo-ple who really understood glass produc-tion and technologies that enabled thetightly integrated control that Quinnneeded. For the new Ince plant, the com-pany knew it would be bringing in equip-
All
pict
ure
s:P.
Koe
rber
ment from all around Europe – Germanyand Italy in particular – where Profibus iswidely employed, so Profibus compatibilitywas also an important issue in the selectionof a control systems supplier.
A key factor, however, was the redun-dant architecture. Because of the nature ofthe furnaces and associated equipment,glass manufacturing plants must operatecontinuously – 24/7/365. Plant availability istherefore paramount, as downtime can beextremely expensive in terms of potentialirreparable damage to the plant. WhenQuinn Glass compared the PCS 7 with alter-native systems, it saw that the redundantarchitecture would provide a major advan-tage in terms of greater plant reliability.Consequently, that technological factor,coupled with the experience Siemens has inthe glass industry, was decisive for the finalchoice to go with Siemens.
Another factor in the decision was thatthe control equipment supplier had to beable to engineer and support glass manu-facturing control systems throughout theentire plant life cycle. Typical of glass man-ufacturing facilities, the Ince plant isplanned to operate for 20 years or more, yet
Quinn Glass’s engineers are confidentSiemens will be fully capable of assistingwith any necessary maintenance andupgrading of the control system through-out the plant’s life.
Integrated solution for hot and cold end
The glass container manufacturing plantat Ince has 13 production lines, and the fill-ing hall has five lines. In total there aremore than 7,500 I/O plus more than 10,000more from drives and medium- and low-voltage equipment that are brought intothe system via Profibus. The Simatic PCS 7system easily handles this level of data.
In the County Fermanagh plant, SimaticPCS 7 controllers had been used at the hotend, but Quinn decided to make wider useof the PCS 7’s flexibility and employ it inboth the hot end and the cold end of thenew plant, making this installation anexample of the horizontal integrationenabled by Totally Integrated Automation.Indeed, the Ince plant takes the automa-tion of glass manufacturing and bottle fill-ing to a new level, thanks largely to the ver-satility and excellent visualization capabil-ities inherent in the PCS 7.
Furthermore, the Simatic PCS 7’s redun-dant system architecture providesimproved scope for future upgrades, asboth hardware and software componentscan be altered without interrupting pro-duction. That precludes the potential forcausing damage to furnaces and associatedequipment in the hot end, and it meansthat modifications can be made to the coldend without plant downtime.
Excellent platform
Quinn Glass is very satisfied with theresults of the project and is confident itmade the right decision in choosingSiemens for the Ince plant. In particular,the company approved of the proactiveapproach of the Siemens project team,which demonstrates the depth and breadthof Siemens’ experience in this industry. Inaddition, because it is powerful, scalable,and flexible, the PCS 7 has proved to be anexcellent platform on which to base theautomation systems. g
Quinn decided to make wider use of the PCS 7’sflexibility and employ it in both the hot end andthe cold end of the new plant
Ince is one of only a handful of plantsworldwide that manufacture and fillglass bottles on the same site
GlassFocus 2006
27
More information:www.siemens.com/pcs7
GlassFocus 2006
28
A s long ago as the mid-1990s, Asahirecognized the huge developmentopportunities offered by the Russ-
ian market and acquired a percentage ofthe largest glass manufacturer in the coun-try, the Bor glass plant. For the automationof a production line for flat glass, coatedglass, and plate glass in Klin, near Moscow,the Siemens Group was contracted to pro-vide the project management for all theengineering, the installation and commis-sioning of the automation and drive tech-nology, the field instrumentation, and thecomplete energy supply, as well as beingresponsible for the integration of all com-ponents supplied by subcontractors.Simatic PCS 7, part of Totally IntegratedAutomation, was implemented as the corecomponent of the solution.
Expertise in Russia
In Bor, around 500 kilometers east ofMoscow, Asahi Glass and its subsidiariesGlaverbel and AGC Automotive operate sev-eral production lines for float glass andautomotive glass, which have been succes-sively equipped with state-of-the-art tech-nology since the mid-1990s.
Asahi recently decided to upgrade thepower distribution in Bor. As a result of itsprevious positive experience with Siemensand the fact that Siemens had alreadydemonstrated in Klin that it was familiar
with the requirements of the Russian mar-ket, Asahi decided to work with Siemensagain. In bidding for this contract, Siemensheld its own against well-known competi-tors, as Bertrand Wiart, project engineer atAGC Automotive, explains: “Several factorsplayed a key role in the decision in favor ofSiemens. In addition to the company’sexperience in the Russian market, whichSiemens has already proven, the proposedtechnology – NXAir air-insulated medium-voltage switching systems and Sivacon low-voltage switching systems – matched ourrequirements perfectly. In addition, withSiemens we would be able to purchase allthe components from one source.”
In Bor, Siemens was responsible for theengineering, supplying the required com-ponents, and monitoring the installationof the systems on site. To do this, Siemensworked with a local Russian partner. Thework on the new power distribution in Borhas now been concluded on schedule and tothe complete satisfaction of the customer.
Another project in Hungary
At almost the same time as the project inBor, Siemens was able to secure two ordersfor a new AGC Automotive plant in the Hun-garian town of Tatabanya, where float glassis further processed into automotive glass.The compact gas-insulated NXPlus switch-ing systems played a key role in tipping the
scales in favor of Siemens. Within the scopeof this project, Siemens was responsible forthe ordering, delivery, and commissioningof the NXPlus switching system, theSimosec systems in the 22-kilovolt range,and a total of 23 Geafol transformers, aswell as the drive technology with 11 Sinam-ics drives and appropriate motors. Otherfactors key to Siemens winning this con-tract were the excellent glass expertise andin-depth project experience of the Siemensteam.
The successful implementation of thisproject and the exemplary internationalproject coordination contributed to thedecision to have Siemens also supply thecomplete medium-voltage distribution sys-tem and process control technology withSimatic PCS 7 for the new float glass plantin India.
Proven technology and an experiencedteam in India
The float glass line in Roorkee is part of aglass complex that is projected to come intooperation at the end of 2006. Roorkee is thefourth glass production operation of AsahiIndia and will, once complete, be the largestintegrated glass production operation, withlines for reflective glass, mirrors, automo-tive glass, and float glass.
On the new float glass line in the Indiantown of Roorkee, Glaverbel is using Simatic
Asahi Glass benefits from international project expertise
Repeat Success For several years, Asahi Glass Co., Ltd., the world’s leading glass manufacturer,and Siemens have been working together successfully to equip glass works allaround the world. Following projects in Iran, Belgium, and Russia, Siemenshas recently successfully completed several projects for two subsidiaries ofAsahi Glass. In all these projects, Asahi Glass has benefited from theestablished glass and project expertise with which Siemens supports itscustomers around the world.
International Projects
CASE STUDY
Asahi und SiemensIn the last years, Siemens has executed
several projects for Asahi:
At AGC Automotive:
Chuderice, Czech Republic
Roorkee, India
Tatabanya, Hungary
At Glaverbel:
Klin, Russia
Maasglas Tiel, The Netherlands
Liya Glass, Iran
Mol, Belgium
At AFG:
Cinimison, USA
Blue Ridge, USA
GlassFocus 2006
29
PCS 7 at the hot end. The efficient SimaticS7 controllers are being used at the coldend, which is equipped by Grenzebach, aswell as in the batch house. Siemens partnerSTG Cottbus was responsible for the CADdesigns, software engineering, cabinet con-struction, installation supervision, andcommissioning.
With a total of 1,000 process signals, thisis a typical float glass project. Around 30percent of the signals are linked viaProfibus DP and PA, including more than 40units of the AEG Thyro-P thyristor con-troller. The architecture of the system inRoorkee combines the most cost-effectivesolution possible with a high level of plantsafety. Four of the automation systems arenot redundant. Instead, each of the morethan 80 control loops has a hardwarebackup in one of the 25 Sipart DR24 hard-ware controllers. Each control loop utilizesthe full PCS 7 functionality as a softwarecontroller and also has an independentbackup in a DR24 with an independent sec-ond control output. The Profibus link to theThyro-P heating units is fail-safe due to amodified software solution: if the bus con-nection is lost or reconnected, the heatingwill continue unchanged for the process.
The complete system was tested loop byloop in two steps in the STG testing panel,including possible error situations. Astraining for later system maintenance,three engineers from the plant operatortook part in these tests, enabling them tofamiliarize themselves with the hardwareand software of their new system. The sys-tem is currently being installed, with theaim of beginning production at the end ofthis year.
International expertise
In all these projects, Siemens was able todemonstrate to Asahi how an internation-ally experienced team can support a clientwith optimally tailored solutions from onesource, thereby simplifying project han-dling and reducing the lead time until com-missioning. This enabled Asahi to benefitboth from the strengths of a globally posi-tioned partner and from the great experi-ence Siemens has in the glass industry. g
More information:www.siemens.com/pcs7www.siemens.com/processinstrumentation
Asa
hi G
lass
Co.
, LTD
.
Simatic technology is implemented inboth the hot and cold end at Asahi Glass –consequently, the company fully benefitsfrom Totally Integrated Automation
Gla
verb
el
The production processes in glassworks require a reliable power supplywith efficient use of energy and a flex-
ible mains structure. Siemens develops andrealizes technically and financially opti-mized power-supply solutions for its cus-tomers – from the incoming supply to theconsumer, and from energy managementto the emergency power system.
Integrated – from medium voltage tothe power outlet
Totally Integrated Power (TIP) enablesSiemens to offer products, systems, andtools that consolidate all the componentsfor power distribution in one integratedunit. TIP encompasses the entire life cycleof a power distribution plant – from plan-ning and design to configuration and
installation to cost-effective operation.Products and systems that have been tai-lored to each other, with optimal interfaces,guarantee reliable operation. At the sametime, standardized interfaces facilitatetrouble-free linking to process control tech-nology and building automation systems.Maintenance-free power distributionequipment, such as the gas-insulated mod-ular NXAir and NXAirPlus medium-voltageswitchgear, contributes to the reduction inlife-cycle costs. At the same time, flexiblesolutions are being realized with TIP thatcan also be adapted to new requirements –an important contribution to the protec-tion of investments.
In-house generation as an alternative
Moreover, faced with rapidly increasingMore information:www.siemens.com/tip
energy prices, the option of generatingtheir own power supply capacities isbecoming more and more interesting tocompanies in energy-intensive sectors suchas the glass industry. As a result, gas tur-bines and generation sets as well as sys-tems for optimal energy recovery are alsoincluded in the Siemens range of solutionsfor power supply.
Increase availability, reduce costs
A further aspect of power supply is thesecurity of supply. With computer-aidedinformation management, as offered, forexample, by the Sicam PCC energy automa-tion system, operating personnel are pro-vided with a detailed overview of the statusof the supply facilities at all times, enablingthem to efficiently prevent power outages.
Furthermore, Siemens also offers toolsfor effective energy management. Bymeans of a detailed consumption and loadanalysis, which uses information from theprocess control system and the power sup-ply, peak loads can be avoided and powerconsumption controlled in such a way thatthe cost of the energy required remains aslow as possible, without impairing produc-tion. As electrical power comprises a con-siderable portion of operating costs, theseinvestments pay for themselves veryquickly. g
Integrated solutions for power supply systems
Power PackageEfficient production processes require a reliable and uninterruptiblepower supply. This applies in particular to the glass industry, wherequality must be reliably maintained, even during periods of peakload. At the same time, increasing energy prices require a solutionthat also minimizes power costs. Siemens offers a complete packageof systems and solutions for all areas of power supply – from powergeneration to power distribution within buildings.
GlassFocus 2006
30Power Supply
SOLUTION
Vetr
opac
k
GlassFocus 2006
CASE STUDY
Integrated solution bringsnew Bulgarian glass plantonline
All-In-OnePowerWhen the leading Turkish glassmanufacturer Sisecam decided tobuild a new glass plant in thenorthwestern Bulgarian town ofTargovishte, it turned to Siemens tohandle the complete powerengineering. The new plant offeredSiemens an excellent opportunity todemonstrate its unique competenceas a “one-stop shop” with acomprehensive portfolio of productsand solutions.
The technical bid requirements madeby Sisecam Group, currently ranked15th among all of the glass producers
worldwide in terms of total revenues, calledfor a turnkey solution with type-tested cer-tified cabinets. The stringent customer tar-gets stipulated a low-cost solution thatensured on-time delivery at minimum risk,
good quality, as well as matching and/orconverting compatibilities with Bulgarianstandards. Sisecam also expressed a pref-erence for vacuum circuit breakers. Mostimportantly, everything had to be from asingle source.
Full glass production scope
Valued at a total of 220 million US dollars,the Greenfield project actually consists oftwo state-of-the-art plants: a flat glass aswell as a tableware plant. Moreover, Sise-cam has also built a glass treatment facil-ity at the same location. The daily output ofthe flat glass facility alone is estimated at725 tons. Annual production of the table-ware plant at the site is expected to reach150 tons, or approximately 235 millionglass articles, making Bulgaria the leadingglass producer in Eastern Europe.
Both facilities are located at the samesite, and thus share common utilities. Thescope of the Siemens contract includedsupply of the medium-voltage and lowvolt-age cabinets, the entire cabling and erec-tion of all of the equipment supplied, thepower transformers of tableware plant,transformers for the roof heating and theircontrol cabinets, as well as the installationof a SCADA system. The hardware and soft-ware solution saw the integration of 8BK20medium-voltage cabinets with vacuum cir-cuit breakers, 8PT Sivacon low-voltage cab-inets and third party components. Theentire power supply solution for mediumand low voltage was supplied by Siemens,
including services for project managementand field cabling as well as erection worksupport. Consequently, the project offeredSiemens an excellent opportunity to demon-strate the unique “internal synergies” theenterprise possesses as a “one-stop shop.”
Successful commissioning
Both plants have been inaugurated withparticipation of representatives of Bulgar-ian government, municipality and top man-agement of Sisecam Group. This projecthas been awarded by OECD as the biggestgreenfield project in the territory. More-over, the plants will reduce unemploymentat Targovishte – another positive socialaffect of the project. g
More information:www.siemens.com/tip
Totally Integrated Power
The new flat glass and tableware plantsare located in the Bulgarian town ofTargovishte
Sise
cam
phot
oact
ive
phot
oact
ive
31
GlassFocus 2006
32Totally Integrated Power
CASE STUDY
Saint-Gobain Belgium awards major project to Siemens
Power Up
Saint-Gobain has awarded Siemens acontract to completely renew thepower distribution system of oneproduction line for float glass at itsAuvelais site in Belgium. The project isto be completed in 2007.
The aim of the project is to completelyrenew the power distribution systemfor float glass line “A” at the Auvelais
site. The existing system is based on equip-ment provided by multiple vendors.
Technical and solution expertise
Management at Saint-Gobain opted forSiemens as a partner for this major projectbased on Siemens’ technical expertise andthe solution proposed. “We chose Siemensfor several reasons,” explains Fabian Pipart,
project manager at Saint-Gobain. “A clearbenefit for us was the fact that we coulduse Siemens as a one-stop shop, with asingle contact partner. The competitiveprice was also an important factor in ourdecision.” From a technological point ofview, the Saint-Gobain group has beenfamiliar with Siemens equipment for along time. Another key selling point wasthe effective cooperation with Olivier Vin-cent, the international account managerof Saint Gobain France.
Turnkey project
Saint-Gobain and members of the Siemensgroup have worked together in the past,but this project is a first for Siemens inBelgium, where it enters a field previ-ously dominated by competitors.
The contract includes the supply ofmedium-voltage distribution systems
with gas-insulated NXPlus switchgear, aswell as Sivacon low-voltage switchboards.Siemens will provide services includingoverall project management, supply ofequipment, engineering, installation onsite, and commissioning – making the proj-ect a turnkey solution.
On track
The entire float line project will be executedover a period of two years and will be com-pleted in April 2007. The project is cur-rently running smoothly, with all work ontrack for commissioning in early 2007. Withthis project, the Siemens team in Belgiumis continuing the successful project partner-ship between Saint-Gobain and Siemens. g
More information:www.siemens.com/tip
Siem
ens
AG
Siemens-Luoyang cooperation nets promising first results
A Bright FutureThe cooperation agreement between Siemens and China Luoyang Float GlassGroup, signed in 2004 during the International Glass Exhibition in Beijing, has netted first positive results. The company, a major Chinese float glassmanufacturer, had been awarded a government contract to build a ultrathinfloat glass plant in China. The contract proves to be beneficial for Siemens aswell. Similar to four other Luoyang float glass operations, the plant will also beequipped with Simatic PCS 7 technology.
A s one of only two large-scaled Chi-nese glass manufacturing enter-prises, the China Luoyang Float
Glass Group has grown into a powerfulforce in terms of economic profitability,business strength, product quality andmarket reputability. Since its founding in1956, Luoyang has emerged as one of thelargest Chinese industry groups. Its mar-keting network spans across all of China aswell as more than 40 countries and regions,including Great Britain, the US, Japan, theRepublic of Korea as well and Hong Kong.
Luoyang is also one of the most pro-gressive Chinese companies. Regarded asan industry trendsetter, the company is the
only Chinese glass manufacturer to pro-duce float glass thicknesses ranging from0.7 to 25 millimeters. Currently operatinga total of nine float glass lines, the com-pany annually produces more than 18,000weight cases of float glass, or some10,000,000 square meters of glass.
Cutting-edge control technology
In order to strengthen their leading posi-tion, Luoyang signed an Advanced SystemIntegrator cooperation with Siemens in2004. The agreement was expected to formthe foundation for a fruitful cooperation. Bythe end of 2005, a total of four new glassplants are being built by Luoyang that will
be equipped with Simatic PCS 7 in the hotend. Moreover, Siemens will also supplymotion control and drive technology forthe cold end.
The first plant is a plant in Algeria thatwill produce 600 tons of float glass per day.Another two new float lines in China arealso automated with the latest version 6.1of Simatic PCS 7. The highlight project,however, is a facility for producing ultra-thin glass. The plant was built in 1998 andwas at that time the first production facil-ity for ultrathin glass in China. This facilityis currently being modernized, and willalso use Simatic PCS 7 for process control.
A win-win situation
The new plant is not the first joint effortbetween Luoyang and Siemens, and theequally efficient and positive cooperationwill continue to ensure optimum produc-tion output at the Luoyang productionsites. The company particularly benefitsfrom the many advantages provided byTotally Integrated Automation, includingincreased reliability and substantial costreductions over the entire lifecycle of itsfloat glass lines. g
More information:www.siemens.com/pcs7
Siem
ens
AG
CASE STUDYAsia
GlassFocus 2006
33
Project support for Schott TFT LCD glass substrate production in Korea
Perfect SupportThe international technology company Schott intensifies its activities in the booming flatpanel display market. Recently, Schott has founded a joint venture for processing largeTFT LCD glass substrates with the leading technology company Kuramoto Seisakusho Co.Ltd. from Japan. The 90 million Euro plant will be built 70 kilometers south of Seoul in theOchang science park. Series production will start at the end of 2006.
Schott has contracted a team from Siemens for project support in a dedicated post-processing unit in Ochang. For the electrical engineering, water technology, media,power supply and building technology packages, Siemens is responsible for evaluatingthe quotations of the general contractor that have been invited for the bid and helpsSchott clarify technical aspects, gives contract support in Korea and supports transferringthe basic engineering to the general contractor.
PicVue modernizes TFT glass substrate production with Siemens technology
Role ModelPicVue Optoelectronics International Inc., a subsidiary of Taiwan-based STN LCD maker, PicVueElectronics Limited, was established in 2000. The company’s first plant for TFT glass substratewas built in 2001 and started production in the second quarter of 2002.
After two years of operation, PicVue decided to go for major process modifications to improveproduction efficiency. In the scope of this project, two orders were awarded to Siemens. The firstorder comprises modifications of the existing application software running on redundant SimaticWinCC servers with seven terminals and the software for the redundant controller to accommodatefor changes in the furnace and heating control. Moreover, Siemens will supply and integrate newmaster drives, servo motors, controllers and Simatic MP 270B operator panels with the existingdrives system for the glass drawing machine to increase the production rates from two to fourmeters per minute. The specifications developed from the modifications will also be used for thetwo new lines, which are already being built at the Hsinchu site.
Strategic cooperation in Asia
Networking for SuccessTogether with China Triumph International Engineering Company (CTIEC) and the EPC ToledoEngineering from the U.S., Siemens is equipping two new float glass plants in Indonesia witha capacity of 900 tons of float glass per day.
This project is the result of two strategic cooperations: In 2005, CTIEC and Siemens signeda cooperation agreement. Later that year, CTIEC founded a joint venture with ToledoEngineering to integrate the broad and focused know-how of both companies for the Asianglass industry.
The project is presently being executed. Simatic PCS 7 is used as a process automationsystem. The Indonesian project is the second joint project of CTIES and Siemens. CTIEC isquite pleased with the results of the cooperation with Siemens and in 2005, awardedSiemens with the Excellent Supplier Award for excellent support and price/performance ratio.CTIEC intends to also use Siemens products for motion control, process instrumentation andpower distribution.
34Asia
SHORTLIST
P.Ko
erbe
r
P.Ko
erbe
rSc
hot
tA
G
GlassFocus 2006
Success is always the result ofconstructive partnerships betweenthe best in a field. That’s why formany years Siemens has workedsuccessfully with numerousmechanical engineers and plantdesigners specializing in the glassindustry. As a result, glassmanufacturers benefit from acoherent and integrated automationsolution based on Totally IntegratedAutomation that covers all areas ofglass production and processing.
Working with partners has a longtradition at Siemens, and not justin the glass industry. In many
other areas, Siemens has also worked withcompanies that have made a name forthemselves in very different sectors,including research and development, engi-neering, plant construction, systems inte-gration, and service and support.
Maximum benefits for the customer
Technology partners, plant constructors,engineering companies, and Siemens worktogether, using their comprehensive prod-
uct, system, and industry expertise, todevelop customized, future-proof solutionsfor automation and drive technology aswell as power distribution – for the maxi-mum benefit of end customers all aroundthe world.
This collaboration is accompanied by thecontinual development of skills and thesteady advancement of partnerships insales and strategic and technical areas, aswell as an absolute orientation to customerrequirements. The collaboration thus rep-resents confidence and quality as well –also important pillars of success in the glassindustry.
Shared development and globalsupport
Siemens supports its partners in the devel-opment of glass-technology solutions thathelp save energy, ensure quality, or mini-mize nitrogen oxides, for example. Theprocess and automation skills of theSiemens glass team are the ideal addition tothe sound technological and processexpertise contributed by the respectiveplant constructor or technology partner.
It is very important to Siemens that thepartnership covers all aspects of the busi-ness life-cycle. From system developmentto project implementation to spare parts
supply, partner companies are able to ben-efit from the global on-site presence, avail-ability, and support offered by Siemens,allowing them to optimally support theirglass customers all around the world. Atthe same time, close cooperation duringthe development phases ensures that allcomponents – systems, machinery, anddrive and automation technology – are per-fectly tailored to each other.
Win-win-win
This collaboration within the Siemens part-ner network brings numerous benefits forall the participants: Siemens is able toexpand its own portfolio of solutions,thanks to the special expertise of its part-ners; its partners benefit from workingwith an experienced global player in theglass industry in the field of automationand drive solutions; and the customer canbe sure that it has received a well-engi-neered solution that can be seamlessly inte-grated into the environment of Totally Inte-grated Automation. g
Siemens partner network aligns skills and expertise
Joint Growth
More information:www.siemens.com/glass/partner
Cor
bis
35PARTNERGlass Industry
The efficient use of resources and optimization of the production plants dictate today’s automationrequirements for the glass industry. STG GmbH in Cottbus has equipped and optimized a largenumber of glass production plants using technology from Siemens and has been a Siemensautomation technology partner for years. Both companies benefit from this partnership, as Dr. PeterHemmann, one of the managing directors and founders of STG, stresses.
Dr. Hemmann, STG GmbH was one of thefirst companies to settle in Cottbus at thetime it was founded.Peter Hemmann: That’s right – we are thefifth entry in the Cottbus trade register. Itreally took a great deal of courage and pio-neering spirit when Helmut Heelemann,Frank Hegewald (who died much too early),and myself founded STG in the spring of1990 just after the wall came down.
But success has proved us right: as aninnovative, technology-oriented companywe have been on a course of growth eversince. This success is based on the methodsof NOx reduction that we had already devel-oped before the reunification of Germany
energy and reducing NOx emissions, opti-mum process control, and specific use ofsensors in the heating of industrial fur-naces. Although we are traditionally athome in the glass industry, we also developindividual solutions for metallurgy andceramics. We take on all tasks relating to therepair and construction of new glass plants,from conception through engineeringright up to commissioning and service.
A lot has changed in control technologysince 1990. How do you cope with theconstantly changing demands?Peter Hemmann: We have worked in veryclose cooperation with Siemens since our
and that we have further optimized at STG.The zirconium oxide measuring probes foroxygen, which work reliably in harsh envi-ronments with extremely high tempera-tures, have evolved from this. With thisproduct we are virtually without competi-tion worldwide.
STG GmbH is now an establishedenterprise. Where are your strengths?Peter Hemmann: We employ more than40 people and are located on the premisesof a former mill in Cottbus, which gives usenough room to find creative and innova-tive solutions for our customers’ problemssuch as models and methods for saving
STG and Siemens: Successful partnership for the glass industry
Stable, Long-TermRelationship
GlassFocus 2006
STG GmbH CottbusSTG GmbH was founded in the spring of1990 as an innovative, technology-orientedengineering company. Its now more than 40employees have since created solutions forenergy saving and the reduction of NOx
emissions, and for optimum process control,sensor technology, and the heating ofindustrial furnaces. The production sites inthe Grosse Mühle Madlow, a 100-year-oldhistorical building that STG has renovated,offer generous room for efficientengineering and the development of creativetechnological solutions.
Alle
Bild
er: F
otog
rafi
e D
obre
36 PARTNERSGlass Industry
GlassFocus 2006
methods and have the appropriate equip-ment to ensure that our customers are ulti-mately able to gain success in the eyes ofthe law as well.
You have achieved a great deal with yourcompany, STG. What is your personalvision for the years to come?Peter Hemmann: You know, the wonderfulthing about technology, also automationtechnology, is the continuous progress andthe new challenges that it reveals – forexample, new modeling techniques forautomation with which system engineer-ing can be improved. Or the use of videotechnologies and evaluation of the picturesto get clear evidence of the process behav-ior. Personally, I want to create and put myown dreams into practice so that I, and mycolleagues here, continue to develop.
Dr. Hemmann, thank you for speakingwith us.
cepts, for example, increase plant avail-ability. This leads in turn to the greatestpossible production throughput and tohigher sales for the glass manufacturer atthe end of the day. The use of fieldbus tech-nology allows significant savings in thearea of wiring and creates possibilities forpreemptive management of the installedassets.
We are essentially the relay in a win-winsituation from which all those involved ulti-mately draw advantages: our customersbenefit from the large network of an inter-nationally active automation technologymanufacturer and from the productimprovements resulting from feedbackfrom the different applications, andSiemens gets detailed feedback on the per-formance of Siemens products in glass pro-duction processes.
Since you work for customers from allover the world, you probably also have tocope with a large number of nationalregulations and laws.Peter Hemmann: That’s true. It’s notalways easy to identify and satisfy the rele-vant regulations. We try to understand ourcustomer’s wishes and the special require-ments of the respective country in intensivemeetings. We offer the necessary tools and
founding and are therefore always up todate with technological developments. Wehave equipped more than 50 plants withSiemens technology in Europe, America,and Asia. The first success was the equip-ping of the glassworks in Döbern, in whichthe Teleperm M control system was used. In1995, we and Siemens sales made our firstcontacts with floatglass plants. Today wehave more than 30 references in this field.Stable and long-term relationships are thebasis for satisfied customers who gain sig-nificant benefits from the technology – forexample, through optimized processes.
How do you find exactly the rightsolutions for your customers’ problems?Peter Hemmann: The most important pre-requisite to finding optimum solutions andsatisfying customers is understanding theprocess requirements down to the lastdetail. We have a process engineering back-ground, and therefore automation is firstand foremost an aid for optimum processcontrol. Besides, the partnership withSiemens and our project experience give usa detailed knowledge of the capabilities ofthe control system that you won’t find inany manual. Both of these factors create arobust, low-cost, and ultimately future-safesolution. Sophisticated redundancy con-
More information:www.siemens.com/glass/partner
The two directors of STG,production manager HelmutHeelemann and managingdirector Peter Hemmann, areproud of their company’ssuccess. This success is due inlarge part to NOx reductionusing zirconium oxide oxygenmeasuring probes that workreliably in harsh environmentswith extremely hightemperatures
37
GlassFocus 2006
38Totally Integrated Automation
CASE STUDY
For this cold repair, Saint-Gobain againrelied on proven systems and solu-tions. Following Stollberg and Porz,
the Teleperm M process control systeminstalled in 1987 was also changed over toSimatic PCS 7 at the Herzogenrath factorylast year. Some of the I/O devices from theoriginal Teleperm M system were to beretained. Numerous field devices fromother manufacturers also had to be inte-grated.
Integrated solution for subsystems
The automation system, which is dividedinto several subsystems, covers the entirefloat glass manufacturing process – fromthe glass batch house through the tank tothe cooling lehr. A total of four bus systemsconnect the devices in the periphery to thecontrol systems: the pressure monitors forthe coolant, for example, communicate viaan AS-I bus; the low-voltage switching sys-tem with Sentron 3WL circuit breakers and
Simeas power meters communicates viaProfibus DP; the pressure transmitters andfield devices via Profibus PA; and the ViaCCrecorders for monitoring the top rollers viaIndustrial Ethernet.
Modern technology in several areas
Siemens also took over the software engi-neering and commissioning in addition tothe planning, documentation, and deliveryof switch cabinets, while Saint-Gobain wasresponsible for converting the existingswitch cabinets and the wiring.
The cold repair offered a welcomeopportunity to introduce new technologiesin some production areas as well. For exam-ple, the top-roller control was converted toSimatic ET 200S. Simovert Motion ControlKompakt Plus frequency converters wereused as drives, and the areas of furnace,float, and annealing lehr were equippedwith electrical cabinets with ET 200M. AThyro-P thyristor actuator controlled by
Simatic PCS 7 was integrated for the powersupply to the float bath heater and anneal-ing lehr.
The top rollers are monitored withViaCC, which transfers the video datadirectly to the control station. A total of fourViaCC servers and one parameterizationstation monitor the float belt and automat-ically display the penetration depth andspeed in the video picture.
Successful transition
Saint-Gobain is totally satisfied with theresults of the project, as project managerHermann Josef Dittrich confirms: “At thebeginning you think, ‘So many differentsystems’ – and then with PCS 7, it all goestogether perfectly.” g
More information:www.siemens.com/pcs7
Totally Integrated Automation at Saint-Gobain in Herzogenrath
Smooth TransitionInvestment protection is critical in the glass industry. For this reason, thecontrol technology was to be modernized and at the same time parts of theexisting systems were to remain in use during a cold repair at Saint-Gobain inHerzogenrath. The individual systems were connected and integrated into theoverall solution using a total of four different bus systems.
P. K
oerb
er
39
GlassFocus2006
PublisherSiemens Aktiengesellschaft,Automation and Drives (A&D), Gleiwitzer Str. 555, D-90475 Nuremberg, Germany
www.siemens.com/glass
Group Executive Management Helmut Gierse, Hannes Apitzsch, Dr. Peter Drexel, Anton S. Huber
Editorial Responsibility in Accordance with the German Press LawPeter Miodek
Responsible for Technical ContentsRalph Burgstahler,Bernd Lehmann
ConceptChristian Leifels
Publishing HousePublicis KommunikationsAgentur GmbH, GWACorporate Publishing ZeitschriftenP.O. Box 3240, D-91050 Erlangen, GermanyTelephone +49 (0) 91 31/91 92-5 01Telefax +49 (0) 91 31/91 92-5 [email protected]
Editorial staff:Kerstin Purucker (ChR), Gabriele Stadlbaur
Layout:R. Degenkolbe
Copy editors:Irmgard Wagner
DTP: Doess, Nürnberg
Printed by: Wünsch Offsetdruck GmbH
Jobnummer: 002100/RÖE64
Circulation: 5.000
© 2006 by Siemens Aktiengesellschaft Munich and Berlin. All rights reserved by the publisher.
This edition was printed on environmentally-friendly chlorine-free paper.
The following products are registered trademarksof Siemens AG:ET 200, GEAFOL, MASTERDRIVES, MP370, NXAIR,SENTRON, SICAM, SIEMOSYN, SIMATIC, SIMATICMulti Panel, SIMEAS, SIMOSEC, SIMOTION,SIMOVERT, SINAMICS, SINUMERIK, SIPART, SITOP,SITRANS, SIVACON, SIWAREX, TELEPERM, TIA, TIPWinCC
If trademaks, technical solutions or similar are notincluded in the list, it does not imply that they arenot protected.
The information provided in this magazinecontains merely general descriptions orcharacteristics of performance which in case ofactual use do not always apply as described orwhich may change as a result of furtherdevelopment of the products. An obligation toprovide the respective characteristics shall onlyexist if expressly agreed in the terms of contract.
Order No.: E20001-A500-P620-X7600
onlineonline
DIALOGUE
Glass on the InternetFind out more about the Siemens systems and solutions for the glass industryin the Industry Suite Glass Internet portal:
www.siemens.com/[email protected]
teamteamThe Siemens Glass Team:Global knowledgeThe Siemens Glass Team is a network of committed employees with a keeninterest in the glass industry. They support the glass industry worldwidewith products, systems, and solutions for optimizing the economy and effi-ciency of production and ensuring product quality. Teamwork and an under-standing of the problems in glass production are just as essential as theintensive consulting provided to customers in the design phase.You can find your contact partner on the Internet or by e-mail:
cooperationcooperationSimatic PCS 7 at the Zwiesel School of Glass Technology
The Zwiesel School of Glass Technology trains future glass specialists inthree institutes that offer a broad range of training and qualificationcourses. The main part of the school is a training and experimental glassplant that is used for educational purposes and for producing fine glasswaresuch as vases and gift items.
Siemens has delivered a Simatic PCS 7 process control system for thisglass plant to support education at the Zwiesel School of Glass Technology.Engineering and automation were supplied free of charge by UAS.
Consequently, future glass production technicians will have the oppor-tunity to work with state-of-the-art automation technology during theirtraining and will benefit from this knowledge in their careers.
www.siemens.com/glass
www.glasfachschule-zwiesel.de
Maximize …
Our top priority? Keeping productivity curves on the upswing for the glass industry. TheSiemens Glass team, backed by innovative technologies and years of experience in theglass industry, is expert in creating profitable solutions that remain viable into the future.Our approach integrates all levels of your enterprise from the field to management, andall processes from raw materials to finished glass products. Whether you’re installing a newfacility or upgrading an existing one, we’ll integrate your field instrumentation, IT andautomation and energy technologies to create a complete, comprehensive solution.For you, Totally Integrated Automation means increasing flexibility, higher quality,minimized costs – and a clear competitive advantage for your company.You can contact us directly at [email protected]
www.siemens.com/glass
Greater productivity –with more flexibility at lower cost
… your Profit
totally integrated