B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Global fire and gasdetection solutions
Toxic Gas HazardsToxic Gas Hazards
Oxygen HazardsOxygen Hazards
Flammable Gas HazardsFlammable Gas Hazards
[Personal protection]
AATTEEXX
MDSEE90323BR0_Gasdetectorportatile it/en
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Toxic gas and oxygen hazards
Explosimeter for use in all situations
• Main functions- 3 levels of instantaneous alarms- "Non ambiguity reading"- Remaining runtime can be checked at any time- Low battery alarm- Peak/hold reading- Continuous self-diagnostics
• Technological advantages- Sensor protected against H2S poisoning- Exceptional runtime: 22 hours on alkaline batteries
• Ergonomic advantages- Weight: 230 g (8,12 oz)- Wide backlit display- Very bright visual alarm backlight- Audible alarm (85 dB)- IP66 water resistant design
>>>Flammable gas detection in range 0-100% LEL
EX 2000 | Portable explosimeter
ATEX II 2 G EEx iad IICT4ATEX I M1 EEx iad ICSA Div. 1 Class 1, group A, B, C, D
CERTIFIED
Icons
Single gas
Multigas
Flammable gas hazard
Toxic gas hazard
Oxygen hazard
Dry batteries
Type of batteries
Rechargeable batteries
Ingress protection
Event log
Data logging
Local display
precalibrated plug-in sensor
Docking StationTM compatible
iNetTM compatible
Full color display
Smart precalibratedplug-in sensor
MDSEE90323BR0_Gasdetectorportatile it/en
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Flammable gas hazards
>>>Detection of CH4, C3H8, C4H10, H2 in range 0-100% LELor 0-100% volume
EX 2000 C | Portable explosimeter / catharometer detectorATEX II 2 G EEx iad IICT4ATEX I M1 EEx iad ICSA Div. 1 Class 1, group A, B, C, D
CERTIFIED
Measurement of combustible gases in lowor high concentrations
• Main functions- 3 levels of instantaneous alarms- Automatic change of measurement scale- Remaining runtime can be checked at any time- Low battery alarm- Peak/hold reading- Continuous self-diagnostics
• Technological advantages- Sensor protected against H2S poisoning- Precalibrated sensor- Exceptional runtime: 22 hours on alkaline batteries
• Ergonomic advantages- Weight: 230 g (8,12 oz)- Very bright visual alarm- Audible alarm (85 dB)- IP66 water resistant design
The only detector able to distinguish betweennatural gas and other combustible gases orvapours
• Main functions- 3 levels of instantaneous alarms- "Non ambiguity reading"- Remaining runtime can be checked at any time- Low battery alarm- Peak/hold reading- Continuous self-diagnostics
• Technological advantages- Indicates gas type: natural gas or other explosive gas ★- Precalibrated sensor- Sensor protected against H2S poisoning- Exceptional runtime: 22 hours on alkaline batteries
• Ergonomic advantages- Weight: 230 g (8,12 oz)- Very bright visual alarm- Audible alarm (85 dB)- IP66 water resistant design
>>>Combustible gas detection in range 0-100% LEL
GDP 2000 | Portable discriminating explosimeter detector
ATEX II 2 G EEx iad IICT4ATEX I M1 EEx iad ICSA Div. 1 Class 1, group A, B, C, D
CERTIFIED
EXCLUSIVE★
MDSEE90323BR0_Gasdetectorportatile it/en
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Toxic gas and oxygen hazards
>>>“Intelligent” detector for following gases : CO, H2S, O2, NO2, SO2,NH3, Cl2, ClO2, PH3
GasBadge® Pro | Dockable Single Gas Monitor available with Docking StationTM and iNetTM
ATEX II 2G EEx ia I/IIC T4ATEX I M2 EEx ia I/IIC T4CSA Div. 1 Class 1, group A, B, C, D
CERTIFIED
- Calibration station- Automatic instrument calibration,
record keeping, diagnostics and recharging- Graphical user interface to monitor facility-wide
network- Multilingual display- iNet™ support
• Main functions- Automatic calibration of Industrial Scientific MX6 iBrid™ multi-gas, iTX
multi-gas; and T82, GasBadge® Pro, and VX500 single gas monitors- Automatic functional “bump” test at user defined intervals- Automatic generation of calibration and test reports- Graphical analysis of calibration history and sensor performance- Automatic downloading and storage of all stored instrument survey
data at user prescribed intervals
• Technological advantages- Hardwired or Wireless Ethernet communication interface to up to 100
Instrument Docking Stations (IDSs)- Simultaneous communication interface to all individually docked
instruments- Inputs to accept up to 14 different cylinders of certified calibration gas- Built-in system leak detection- Wireless Network LAN Access- Optional pressure transducer input for all gas cylinders
• Ergonomic advantages- Graphic Liquid Crystal Display (LCD) on Instrument Docking Station- 3-Button membrane keypad- Multiple Language Support
DS2 | Docking Station™
>>>Automatic bump test and calibration station
A protection for life
• Main functions- PPM or % by volume readout- Segmented display for direct gas readings- Standard STEL and TWA- One year datalogging capacity (minimum)
• Technological advantages- Docking Station™ and iNet™ compatible- “Go/No Go” display mode- User selectable low and high alarms- Custom LCD with graphical icons for easy use- 2 600 hour runtime (minimum)
• Ergonomic advantages- Very light: 72 g (2,53 oz)- Backlit display- Powerful audible alarm complemented by vibrating and visual
alarms, standard- Water resistant IP66/67
MDSEE90323BR0_Gasdetectorportatile it/en
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Toxic gas and oxygen hazards
Worry-free safety
• Main functions- Disposable personnal gas dectector- Powerful audible alarm complemented by vibrating and visual alarms,
standard- PPM or % by volume readout- “Go/No Go” display mode
• Technological advantages- Extremely water resistant – third-party certified IP66/67- Backlit display- Confidence indicator- User selectable low and high alarms
• Ergonomic advantages- Very light: 72 g (2,53 oz)- Maintenance-free operation for 2 years- Event-logging (last 15 gas alarm events)- Cal Plus™ calibration station (optional)- 2 year warranty- NEW: dockable (DS2) and Inet™ compatible
>>>Available for CO, H2S, O2, NO2 ou SO2
ATEX II 2 G EEx ia IIC T4ATEX I M2 EEx ia IIC T4CSA Div. 1 Class 1, group A, B, C, D
CERTIFIED
GasBadge® Plus | Personal Single Gas Monitor
- Simple, push-button calibrationor functional (bump) testing
- Stand-alone operation – no PC is required- Immediate report generation- On board printer option
Optical technology
• Main functions- 2 levels of instantaneous alarms- TWA alarm- Remaining runtime can be checked at any time- Low battery alarm- Continuous self-diagnostics- Data logging
• Technological advantages- Selective measurement- Very long lifetime sensor- Automatic calibration during night time
• Ergonomic advantages- Very light: 135 g (4,76 oz)- Wide, bright display- Simultaneous display of instantaneous value and TWA- 5 alarm LEDs- Ultra-simple single-key keyboard- Adapted to extreme conditions- IP66 water resistant design- Luminous alarm visible in all directions- Audible alarm (80 dB)
>>>Detects CO2 in ranges STD 0-3.00% vol. or 10-10.00% vol
C 1100 | Infrared CO2 detector
For non-classified zonesCERTIFIED
MDSEE90323BR0_Gasdetectorportatile it/en
Latest generation multirisk collective protection• Main functions- 3 levels of instantaneous alarms- "Non ambiguity reading" function if 100 % LEL is exceeded- STEL and TWA alarms- Remaining runtime can be checked at any time- Low battery alarm- Peak/hold reading- Data logging for nearly 4 months (700 hours for 5 gases)- Continuous self-diagnostics- Inspection round function
• Technological advantages- Only multigas beacon with ATEX II 1G EEx ia IIC T4 approval ★- Can be used in any 2, 1 or 0 zone ★- IR absorption optical CO2 sensor- 2 special sensors:• Special H2S for refinery: no cross sensitivity to unsaturated hydrocarbons ★• Special CO for Steelworks: very low hydrogen cross sensitivity- 2 logical outputs (fault and gas alarm)- 2 logical inputs (remote acknowledgement and manual triggering)- Perimetric detection optional- Trickle charge in zone Ex- LEL sensor protected against H2S poisoning- Automatic calibration- Runtime: up to 170 hours
• Ergonomic advantages- Easily transportable: 6.8 kg (15 lbs)- Visual alarm visible from a long distance in all directions (5 Joules)- Powerful siren alarm, 103 dB at 1 m- Backlit "FLIP-FLAP" graphic display ★- Excellent balance between weight and ruggedness- Adapted to extreme conditions- IP66 water resistant design
>>>Simultaneous detection of 1 to 5 gases including: Explosive gases, O2, CO, H2S, SO2, NH3, NO, NO2, HCN, HCl, Cl2, ETO,PH3, AsH3, COCl2, SiH4, CO2
BM 25 | Multigas and aera monitor
EXCLUSIVE★
ATEX II 1G EEx ia IICT4ATEX I M1 EEx ia I
CERTIFIED
The ideal instrument for most common gases
• Main functions- 3 levels of instantaneous alarms- "Non ambiguity reading" function if 100 % LEL is exceeded- STEL and TWA alarms- Remaining runtime can be checked at any time- Low battery alarm- Peak/hold reading
• Technological advantages- Large LCD provides simultaneous and continuous readout of up to all
four gases.- Includes vibrating, 90 dB audible, and LED visual alarms- High-visibility, impact resistant composite – RFI, EMI and ingress
protection tested and approved- Automatic calibration
• Ergonomic advantages- 18-hour runtime with lithium-ion battery- Up to 75 hours of datalogging capability- An optional compact parasitic sampling pump enables
remote sampling from up to 50 feet away
>>>1 to 4 gas monitoring for O2, H2S, CO & combustible gases
ATEX II 2 G EEx iad IIC T4CSA Div. 1 Class 1, group A, B, C, D
CERTIFIED
M40 | Portable multigas detector
- Calibration station- Function (bump) testing- Stand-alone operation. No PC is required.- Battery Recharging- Simple, two-button operation
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Mul
tiga
s
MDSEE90323BR0_Gasdetectorportatile it/en
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
IBRIDTM MX6 M40
Chargersand electrical pump
Charger andadapters
Leathercarrying case
Leathercarrying case
GasBadge® PlusGasBadge® Pro
BM 25 EX 2000 - EX 2000 CGDP 2000
Remote sampling system
Remote sampling system
Automatic bumptest
and calibrationstation
Automatic bump test and calibration station
for IBRIDTM MX6.
Automatic bump test and calibration station
for GasBadge® Pro.
shock-resistant shell
Automatic bump test and calibration station
for GasBadge® Plus.
trickle charge kit
Alarm transfert kit
Charger/Datalink IBRIDTM MX6with pump
Hard case
Calibrationcap andtubing
Leather case
MX 2100
Accessories
MDSEE90323BR0_Gasdetectorportatile it/en
B.A.G.G.I. srl - Viale Campania, 29 - 20133 Milano - Tel. +39-02-715547 Fax +39-02-7490571 [email protected] - www.baggi.com
Turnkey projects
Technical support
Customer serviceA network of experienced technicians in your vicinity provide monitoring, inspection and maintenance.
Full services on site or at the central ARRAS workshop.
A maintenance contract takes the worry out of detector servicing: we take care of everything.
For more information or an estimate, contact your localsales agency or call the freephone number 0825 842 843(France only).
The Industrial Scientific-OLDHAM training centre can providetraining engineers, specialised technicians, conferencerooms and handling equipment meeting all your gas andflame detection training needs.
It provides theoretical, technical or practical training designed to provide the most suitable solution for userneeds.
The sessions can be given in French or English, on a scheduled ormade-to-measure basis. A certificate bearing the participant’sname and valid for three years is delivered after each course.
The sessions programmed over the year are given at the training centre; the schedule is available on request bytelephone, mail or Internet.
Focusing on your needs, Industrial Scientific-OLDHAM engineers bring you economic and effective responses to allyour safety problems.
Since its formation, Industrial Scientific-OLDHAM hasalways designed and developed products in associationwith tradesmen, professional emergency teams, safetymanagers and major industrial companies. This globalapproach ensures your needs are met.
Services
MDSEE90323BR0_Gasdetectorportatile it/en
Explosion risk •Range 0-100% LEL •Ranges 0-100% LEL and 0-100% volumeCH4, C4H10 et H2Identification of Natural Gas*
Oxygen riskRange 0-30% volume • •Nuclear power plant special versionPartial pressue
Toxic Risk • • •CO / H2S • •NO/NO2/NH3/HCl/HCN/Cl2/H2/O3 • •SO2 • •PH3/SiH4/ClO2/COCl2/AsH4 •VCM/ETOCO2 •Refinery special versionH2S no unsaturated hydrocarbon disturbanceSteelworks special versionCO very low H2 disturbance (7%) •Fire department special versionCO (ppm) and carboxyhaemoglobin (%HBCO) • •VOC
Detection PrincipleCatalytic • exploElectrochemical • •Semi-conductorInfrared •PID
SensorStandard sensors • •Precalibrated sensors •Plug and Play intelligent sensors •
Display unitBacklit LCD • • • •Backlit graphicExtra wide (18 cm2), backlit graphicFlip-Flap reversible display functionFull color display
Display readingsReal-time concentration levels • • • •STEL value •TWA value • •Date and timeMin. and Max. • • • •Reserve time • • • •
Gas alarms2 instant thresholds • • • •Non ambiguity reading • NOver range • • •STEL •TWA • •
Fault alarmsSensor fault • • • •Electronic sensor fault • • • •Battery fault • • • •
DataloggingMin/Max • • • •Events • • •Measurements • •Inspection roundDockable •iNetTM compatible •
CalibrationManual • •Automatic • •
Warning systemsVisual • • • •FlashAudible 95 dB 95 dB 85 dB at 30 cm 85 dB at 30 cm 85 dB Vibrating • •Confidence bleep • •
Power supplyDry batteries • • •NiMH battery pack • •Lithium ion •
Runtime 2 years 2 600 h 12 h 22 h 2Charging time NA NA 4h 4 h 4IP 66/67 66/67 66 66Dimensions in mm (h x w x d) 81,3 x 48,3 x 27,9 94 x 50,8 x 27,9 125 x 52 x 32 144 x 55 x 30 144 xWeight 72 g 85 g 135 g 230 g 23Operating temperature -40 +60°C -40 +60°C 0 +50°C -25 +55°C -25 Guarantee 2 years For life 2 years 2 years 2 yHomologationsATEX II 2 G EEx ia IIC T4 II 2G EEx ia IIC T4 NA II 2 G EEx iad IIC T4 II 2 G EEx
I M2 EEx ia IIC T4 I M2 EEx ia I NA I M1 EEx iad I I M1 ECSA Div I, Class I, Gp A,B,C,D Div I, Class I, Gp A,B,C,D NA Div I, Class I, Gp A, B, C, D Div I, Class GOST ••• ••• NA •IECEX • •
GasBadge® Plus GasBadge® Pro C 1100 EX 2000 EX 2
Caption : • delivered with the apparatus - in option
Technical Characteristics• • • • • •• • • • • •
•• • •
• •• • •• • •
• • •• • • •
• • •• • •• • •• •• • •
• •
• •
•
o/catha • • • • • •• • • •
• • ••
• • • •• • •
• • • • •
• •• •
• • • • • •• • • •• • • •• • • •
• • • • • •• • • • • • •
• • • • • • •N/A • • • • • •
• • • • •• • • •• • • •
• • • • • • •• • • • • • •• • • • • • •
• • • • • •• • • •• 700 hrs, 5 gases • 700 hrs, 5 gases
•••
• • •• • • •
• • • • • ••
at 30 cm 85 dB at 30 cm 85 dB at 30 cm 90 dB 98 dB at 30 cm 95 dB 103 dB at 1 m• • •
• • • • •
• • • • • •• • • • •
• •22 h 22 h 22 h 18 h 16 h 36 h Up to 170 h4 h 4 h 4 h 5 h 3 h 5 h 30 4 h 3066 66 66 65 66 66/67 66
x 55 x 30 144 x 55 x 30 144 x 55 x 30 109 x 62,2 x 34,8 110 x 80 x 45 135 x 77 x 43 425 x 160 x 13030 g 230 g 230 g 244 g 350 g 409 g 6,8 kg+55°C -25 +55°C -25 +55°C -20 +50°C -25 +50°C -20 +55°C -20 +50°C
years 2 years 2 years 2 years 2 years For life 2 years
x iad IIC T4 II 2 G EEx iad IIC T4 II 2 G EEx iad IIC T4 EEx ia d IIC T4 II 1 G EEx ia IIC T4 II 2G EEx ia d IIC T4 II 1G EEx ia IIC T4EEx iad I I M1 EEx iad I I M1 EEx iad I I M1 EEx ia I I M1 EEx ia II, Gp A, B, C, D Div I, Class I, Gp A, B, C, D Div I, Class I, Gp A, B, C, D Div I, Class I, Gp A, B, C, D Class I, Gp A, B, C, D• • • • •
• • •
2000C GD 2000 GDP 2000 M40 MX 2100 IBRIDTM MX6 BM25
MDSEE90323BR0_Gasdetectorportatile it/en