CUSTOM ORDERS AVAILABLE SHORT LEAD TIMES FULL INSTALLATION/STARTU
Model: GHS-1000LB4L30 Hemp Dryer
-------
-
1 - ,fj
ADVANTAGES: • CLOSED/SEALED SYSTEM; NO AIRBORNE PARTICULATES• VARIABLE TEMPERATURE AND SPEED CONTROL• ACCESS PANELS FOR EASY MAINTENANCE AND SANITATION• 100% TURNKEY INSTALLATIONS
GLOBAL HEMPSOLUTIONS
-
-
[email protected] (740) 444-HEMP Global-Hemp-Solutions.com
CUSTOM ORDERS AVAILABLE SHORT LEAD T
Need more capacity? Let us build a custom design to fit your desired capacity and SAVE$$$
GLOBAL HEMP SOLUTIONS
(740) 444-HEMP Global-Hemp-Solutions.com
Model: GHS-1000LB4L30Hemp Dryer
ESTIMATETurnKey Dryer Installation
Global Hemp Solutions4044 Fort Campbell BoulevardHopkinsville, Kentucky 42240
United States
740-444-4367www.Global-Hemp-Solutions.com
BILL TOEXAMPLE CLIENTEXAMPLE CLIENT
Estimate Number: 012528
Estimate Date: April 14, 2020
Expires On: April 14, 2021
Grand Total (USD): $210,000.00
Items Quantity Price Amount
TurnKey 4 Layer Dryer & Installation30ft 4 Layer Hemp Dryer System - CompleteDesigned, Sourced, and Built in the USA
**SYSTEM COMPONENTS**- Main power 480v 3PH- Conveyor belt consist of chain drive and meshproduct belt- Main conveyor drive variable speed VFD- In-feed and discharge conveyor variable speedVFD- Galvanized Interior w/ stainless steel removablepanels- System to include heat exchanger and 750K BTUPowerflame burner w/ Honeywellcontrols- System to include circulation blower 30,000 CFM40HP 3 PH 480v- System to include all controls/cables/safety e-stops- System to include exhaust motor for combustiongases
**KEY NOTES**- Gas requirements – 1” npt hookup (7 to 14” W.C)for the gas supply- Main power hookup - 75 amps.- E-stops at in-feed and discharge conveyor andmain panel- American made burner (Natural gas, Propane sameburner can be configured on site)- 3PH 480V required ( Single PH 220- In-feed Bail Breaker and shredder sold separately
1 $210,000.00 $210,000.00
Page 1 of 3 for Estimate #012528
Total: $210,000.00
Grand Total (USD): $210,000.00
Notes**CONTROLLER UPGRADES AVAILABLE**PLC OPTION 1 - PLC upgrades available (Standard PLC with oven operation on the HMI, no feedback from burner). AdditionalCost: $15,000PLC OPTION 2 - PLC upgrades that includes all the pressure switches and any feedback from accessory items. AdditionalCost: $23,000**MOTORS**- Drive motor will be either 1x – 3PH, or 2x – 1.5 HP (VFD control)- 1/2HP motors on the accessory conveyors (In-feed and discharge)(VFD control)- Exhaust fan – 3HP- Combustion fan (burner fan) ¼ HP- Circulation fan 40HP, 30,000 CFMMain box weight – approx. 15,000 lbs.Circulation Fan – approx. 1,000lbs
**TURNKEY INSTALLATION SERVICE**
**3 days for installation, 2 days for validation, training, and test runs**Based on a 4 man crew (1 project mgr., 2 millwrights, 1 electrical tech)Based on 5 x 8hr work daysPer Diem and hotel accommodation included in rate
**SCOPE OF WORK**- Unload equipment/stage for installation- Set and level center line main dryer box- Set and level heat exchanger- Set and level circulation blower- Set and level in-feed conveyor- Install electrical panel for main power hookup- Install all electrical items and wire motors to main panel via cables- Install all e-stops and burner controls and equipment- Ready burner for main gas hookup- Verify all electrical connections and test system- Test operation of oven and burner system- Validate all system conveyors- Run system complete training and startup
Page 2 of 3 for Estimate #012528
ESTIMATETurnKey Dryer Installation
Global Hemp Solutions4044 Fort Campbell BoulevardHopkinsville, Kentucky 42240
United States
740-444-4367www.Global-Hemp-Solutions.com
Notes**CLIENT RESPONSIBILITIES**- Main gas hook-up- Main power hook-up- Any materials not in scope of work- Any roof penetrations- Exhaust pipe extensions (TBD based on client layout)-Shipping cost not included in estimate and to be communicated at time of arrangement. Client responsible for all shippingcosts; including but not limited to deliver/offloading fees, re-delivery, change of delivery. Delivery of equipment will beaccording to the Project Schedule. Schedule to be negotiated and determined with Client.
Page 3 of 3 for Estimate #012528
Thank you for the opportunity to serve you
ESTIMATETurnKey Dryer Installation
Global Hemp Solutions4044 Fort Campbell BoulevardHopkinsville, Kentucky 42240
United States
740-444-4367www.Global-Hemp-Solutions.com