glOBal training Offer
GRIDTechnical Institute
02 I Globa l Tra in ing Offer
200top-level training courses
4,300training days
30 yearsof training expertise
Globa l Tra in ing Offer I 03
editorial
GET EMPOWERED
In today’s booming electricity market, the challenge of the twenty-first century will be that of access to power. To be up to the task, Alstom Grid provides its customers with highly specialized, comprehensive electrical installa-tion and grid expertise in the areas of security, service continuity, energy quality and network service continuity, energy quality and network performance, all aspects that optimize and prolong the lifespan of customer assets.Alstom Grid Technical Institute offers a full range of training in electrical grid safety, ope-rations, maintenance, protection, control and management. This high value-added selection of training courses encompasses all aspects of electricity, with an offer ranging from fundamentals to competence management.Alstom Grid Technical Institute works with you to build the training plan best adapted to your teams’ needs and provides training in the latest advanced technologies. Trainees learn from trainers with the highest levels of exper-tise and teaching skills.Alstom Grid Technical Institute offers over 200 training courses from which you can choose the training you need.
STÉPHANE JULIENNEservice Operations & technical institute
Vice-president
Select your course at a glance: go by profi les 06 12:
68
Training is Power
Operation & Maintenance Matching your needs 70Transmission equipment 71Additional programs 97
Knowledge & DesignMatching your needs 32e-Learning courses 33Technical fundamentals 36Protection & substation control 49Network Management 60Telecommunications 66Additional programs 67
20
Safety & Risk PreventionMatching your needs 22Electrical safety 23Safety in hazardous areas (ATEX) 27Additional programs 29
Alstom Grid Technical Institute: more than just training 14
30
04 I Globa l Tra in ing Offer
Customers references 198
Protection & Substation controlMatching your needs 100Protection – System training 101Substation control system – Product training 120
98
Network ManagementMatching your needs 136Network Management 137Telecommunications 189Additional programs 197
134
Competence Management:the ultimate training experience 16
e-Learning: training to meet individual needs 18
Globa l Tra in ing Offer I 05
06 I Globa l Tra in ing Offer
Safety & Risk Prevention
Knowledge & Design
page electrical safety reference prOfiles
neW 23 Electrical Risk Prevention Tool s100129 Electrical Risk Prevention Tool – Spanish version s100129 Electrical Risk Prevention Tool – French version s100129 Electrical Risk Prevention Tool − German version s100124 Electrical Safety for non-electricians f101025 Electrical Safety for electricians working at Low Voltage f102026 Electrical Safety for electricians working at Low, Medium and High Voltage f1030
safety in hazardOus areas (ateX)
29 Introduction to explosive atmosphere risks f500127 Safety in explosive atmospheres for workers f502028 Safety in explosive atmospheres for managers and supervisors f5030
page e-learning cOurses reference prOfiles
33 HV power transmission (> 50 kV) e-Learning training modules s320034 MV power distribution (> 1 kV) e-Learning training modules s3300
neW 35 Introduction to Energy Management Systems e-Learning training modules s4111
technical fundamentals
36 Electrical Energy Essentials gee00237 Power System Engineering gee00438 Voltage stability gee00739 Fundamentals of Power System Protection prOg00140 Grid Connection Protection prOg01141 Medium Voltage industrial installation design a211267 High Voltage installation diagrams and components a2402
neW 42 Fundamentals of Power Transformers a421343 Instrument Transformers a5312
neW 44 Digital Instrument Transformers (DIT) m108/a531367 Surge Arresters a5412
neW 45 Fundamentals of the High Voltage Circuit breaker a5503neW 46 Fundamentals of the generator Circuit breaker within its electrical environment a9103neW 47 Basic HVDC Training hVdc001
48 APPS − Industry Power System Protection prOg002
prOfessiOnal prOfiles > installatiOn OperatiOn maintenancedesignmanagement
list of courses
WeB
WeB
WeB
WeBWeBWeBneW
WeB additional programs available on demand
new catalog programneW
Globa l Tra in ing Offer I 07
Operation & Maintenancepage transmissiOn equipment reference prOfiles
neW 71 e-Learning fundamentals for High Voltage above 50 kV s3201neW 72 e-Learning fundamentals for GIS (Gas-Insulated Switchgear) substation s3202neW 73 Transformer technology, features and applications s3601
74 SF6 Gas Recovery Regulation EC 842−2006 (for inexperienced personnel) V003275 SF6 Gas Recovery Regulation EC 842−2006 (for experienced personnel) V0033
neW 76 Handling of SF6 and CF4 gases according to IEC/TR 62271−303 technical report m11197 Immersed transformers: fluid sampling for laboratory analysis c4233
neW 77 Power Transformers Operation & Maintenance c424278 On Load Tap Changers Operation & Maintenance c4532
neW 79 Vertical-break, Center-break and Pantograph – Disconnector and Earthing Switches from 52 kV to 550 kV m151/tir05897 SF6 Circuit breaker Type S1… F1/F3 (synchronous) 72,5 kV up to 170 kV – Commissioning & Maintenance tir04880 SF6 Circuit breaker – GL Type for High Voltages under 250 kV – Operation & Maintenance V5642/m105/tir04981 SF6 Circuit breaker – GL Type for High Voltages over 250 kV – Operation & Maintenance V5442/m106/tir055
page prOtectiOn & suBstatiOn cOntrOl reference prOfiles
49 APPS − Utility Power System Protection prOg00350 Advanced Power System Protection prOg00451 APPS Part 1 – Power Systems Protection prOg00552 APPS Part 2 – Application of Protective Relaying to Transmission Systems prOg00653 APPS Part 3 – Overcurrent Grading and Commissioning prOg00754 APPS Combined Course 1 (part 1 + part 2) prOg00855 APPS Combined Course 2 (part 1 + part 2 +part 3) prOg00956 APPS T01 − Introduction to the Protection Scheme Philosophy for MV and HV Networks prOg01257 APPS – Utility Transmission Power System Protection – Basic prOg01358 APPS − Utility Transmission Power System Protection – Advanced prOg01459 APPS − Utility Transmission Power System Protection – Expert prOg015
netWOrk management
60 Power Network Essentials gee00361 First Line System Maintenance emsg00367 SCADA Security gee00562 Situation Awareness in Control Centers for Real-Time Operations of Power Systems and Markets gee006
neW 63 Introduction to Smart Grid gee008neW 2647 Control Center Architecture gee009neW 65 Troubleshooting gee010
telecOmmunicatiOns
66 Telecommunications in a Power Network tel013
neW
WeB
WeB
WeB
08 I Globa l Tra in ing Offer
Operation & Maintenance
list of courses
page transmissiOn equipment reference prOfiles
82 Deadtank Circuit breaker − DT1/DT2 Ranges m10183 Monitoring CBWatch-2 Operation V8142/m14184 Synchronizing relay RPH Range V8342/m14297 FKG1 – SF6 generator Circuit breaker – Operation & Maintenance V934285 FKG2 – SF6 generator Circuit breaker − Operation & Maintenance V944286 FKG1 – SF6 generator Circuit breaker − Operation & Maintenance V9542
2977 Gas-Insulated Switchgear – F35-2 Type – Maintenance & Breakdown repair tiOe00187 Gas-Insulated Switchgear – F35−3/4/5 Type − Maintenance & Breakdown repair tiOe00288 Gas-Insulated Switchgear – B65 Type − Maintenance & Breakdown repair tiOe00389 Gas-Insulated Switchgear – B95/212 Type − Maintenance & Breakdown repair tiOe004
2977 Gas-Insulated Switchgear – B112 Type – Maintenance & Breakdown repair tiOe00590 Gas-Insulated Switchgear – B105 Type − Maintenance & Breakdown repair X444291 Gas-Insulated Switchgear – T155 Type Spring mechanism − Maintenance & Breakdown repair X614297 Gas-Insulated Switchgear – T Type − Maintenance & Breakdown repair X204292 BWatch-3 − Status monitoring system for Gas-Insulated Switchgear X8142/m14393 CAIS/AIM/HYpact Compact − Outdoor Substation Solution/72.5 kV up to 170 kV − Commissioning, Operation & Maintenance tir05994 MS 3000/MS 2000 in Practice − Installation, Operation and Maintenance tir066
neW 95 Spring operating mechanism for Circuit breaker Type FK1/2/3 Service, Maintenance & Troubleshooting tiOe006neW 2967 High Voltage test with PD/UHF Measurement on Gas-Insulated Switchgear tiOe008
97 FX12 – FX14 – FX22 – FX32 – FX42 – High Voltage – SF6 Circuit breaker – Operation & Maintenance V34422977 FXT14 – FXT245 – High Voltage SF6 Circuit breaker – Operation & Maintenance V434297 FXT15 – FXT16 – FXT17 – High Voltage SF6 Circuit breaker – Operation & Maintenance V4442
2977 SF6 Circuit breakers Type S1 … F1/F3 - 52 kV bis 245 kV – Commissioning & Maintenance tir05097 SF6 Circuit breakers Type S1 ... F1/F3 - 52 kV bis 245 kV – Operation & Maintenance tir051
2977 SF6 Circuit breakers Type S1 … F1/F3 (synchronous)/72,5 kV bis 170 kV – Operation & Maintenance tir05297 SF6 Circuit breakers Type S1 ... F1/F3 – (intelligent/synchronous) 72,5 kV bis 170 kV – Operation & Maintenance tir053
2977 SF6 Circuit breakers Type S1 … S2 with pneumatic or hydraulic mechanism/123 kV up to 420 kV – Operation & Maintenance tir06097 SF6 gas in switching equipment and substation tir007
2977 PKG Air Blast generator Circuit breaker – Operation & Maintenance V924297 Deadtank Circuit breakers ≥ 123 kV HGF1012/1014 Series m102
2977 SF6 Circuit breakers – GL 200 – Maintenance and Repair m10497 SF6 Circuit breakers – GFX family ≥ 123 kV – Maintenance & Repair m107
2977 Gas-Insulated Switchgear Series B1 up to B4 / 72.5 kV up to 420 kV – Operation & Maintenance tir061
prOfessiOnal prOfiles > installatiOn OperatiOn maintenancedesignmanagement
WeBWeBWeBWeBWeBWeBWeBWeB
WeB
WeB
WeB
WeB
WeBWeBWeBWeBWeBWeB
WeB additional programs available on demand
new catalog programneW
Globa l Tra in ing Offer I 09
Protection & Substation Control
page Protection − SyStem training reference prOfiles
101 Protection of industrial installations d2102102 Legacy Product Training: Electromechanical, MiDOS, K-series, L-series, Tropic, OPN prOp001103 MiCOM Px20 & Px40 Master Class prOp002104 MiCOM Px20, Px30 & Px40 Master Class prOp003105 MiCOM Px30 Master Class prOp004106 MiCOM P440, P630 & P540 Relaying prOp005107 Overcurrent and Feeder Protection − MiCOM P12x and P14x prOp120108 Motor Protection − MiCOM P22x and P24x prOp121109 Generator Protection − MiCOM P34x prOp122110 Distance Protection − MiCOM P44x prOp123111 Line Differential Protection − MiCOM P52x and P54x prOp124112 Voltage and Frequency Protection − MiCOM P92x and P94x prOp125113 Distance Protection Device for Railway Application − MiCOM P438 prOp132114 Differential Transformer Protection − MiCOM P63x prOp127115 Distance Protection Device − MiCOM P437 prOp128116 Feeder Protection Device − MiCOM P139 prOp129117 Digital Differential Busbar Protection − MiCOM P74x prOp130118 Disturbance and Power Quality Recorder − MiCOM M57x/M87x prOp131119 Railway Protection prOp006
SubStation control SyStem − Product training
120 Advanced Digital Control System scs001121 Basic Principles of Digital Control System scs002122 Application on IEC 61850 Communication Protocol scs003123 Communication as per IEC 60870 and IEC 61850 scs004124 MiCOM S10: Protection-Based Substation Control System scs005125 MiCOM C264: Compact RTU (Remote Terminal Unit) scs006126 Fundamentals of Digital Control System and PACiS Operation & Maintenance Principles scs007127 PACiS Protection Automation & Control – Operation scs008128 PACiS Protection Automation & Control − Architecture, Operation & Maintenance scs009
129 PACiS Protection Automation & Control − Architecture, Operation, Maintenance & Basic Configuration scs010130 SPACE 2000 Digital Control System scs011131 PSCN3020: Integrated Protection & Distributed Digital Control System scs012132 S900 RTU and Procett 5000 W Operation & Maintenance scs014
neW 21337 Configuration of IEC 61850 communication on MiCOM Px30 and Px40 series scs020
10 I Globa l Tra in ing Offer
Network Management
list of courses
page netWOrk management reference prOfiles
137 Introduction to e-terraplatform/e-terrahabitat emsp034138 Introduction to e-terrahabitat emsp017139 e-terrahabitat Databases emsp012140 SCADA and Alarm Features emsp038141 e-terrahabitat System Management emsp013142 Managing High Availability Systems emsp019143 e-terracomm emsp008144 e-terraplatform Security Management emsp015145 e-terracontrol for e-terraplatform Customers emsp009146 e-terracontrol troubleshooting emsp011147 Building Full Graphic Displays for e-terracontrol using e-terrabrowser emsp050148 e-terracontrol for non-e-terraplatform Customers emsp010149 Programming in e-terracontrol emsp023150 Programming in e-terrahabitat emsp022151 Introduction to e-terramodeler emsp018152 Alarm Modeling for Real-time Operations emsp001153 Building Full Graphic Displays using e-terrabrowser emsp005154 Advanced UI concepts emsp033155 Building a SCADA Model emsp004156 Building a Network Model emsp003157 Building a Generation Model emsp002158 Building a DTS Model emsp024159 Building a Substation emsp025160 e-terrasimulator Instructor emsp016161 Network Analysis emsp020162 Network Optimization emsp021163 Network Application Features emsp036164 Generation Application Features emsp030165 e-terraloadforecast emsp029166 e-terracommit emsp028167 e-terravision emsp049168 e-terraarchive emsp007169 e-terraplatform 2.x − 2.y Delta Course emsp014170 Full Network System from Field to SCADA emsp042171 Using Alstom Grid’s Graphical Modeler emsp040197 Fundamentals of Operator Tools emsp006197 e-terrapclink emsp031172 iGRID emsp032197 Overview of Power Systems Application Software emsp037
prOfessiOnal skills > installatiOn OperatiOn maintenancedesignmanagement
WeB
WeBWeB
WeB additional programs available on demand
new catalog programneW
Globa l Tra in ing Offer I 11
197 EMS-DMS Data Model emsp027197 Crystal Report Generation emsp039197 Introduction to FDIR emsp043197 TCS Operation emsp044197 TCS-WO System Management emsp046197 WO Operation emsp048197 Introduction to Power System Principles emsp035173 Database building with DDB emsp026174 Protocol Analysis emsp053175 Historical Data Management emsp054176 EMS Database and Display Maintenance emsp055
neW 177 Introduction to e-terradistribution dmsp001197 Distribution Electrical Asset Mode dmsp002
neW 178 Introduction to e-terradistribution architecture dmsp003neW 21797 e-terradistribution Databases dmsp004
197 Substation Editor dmsp005neW 21807 e-terradistribution System Management dmsp006neW 181 e-terradistribution Model Management dmsp007
197 Distribution Operator Training Simulator (DOTS) Instructor dmsp008197 Modeling for Distribution Operator Training Simulator (DOTS) dmsp009
neW 21827 e-terradistribution Operator Training dmsp010197 e-terradistribution Network Analysis Function (DNAF) dmsp011
197 e-terradistribution Historian dmsp012
telecOmmunicatiOns
183 ALCATEL PABX PCX 4400 tel003184 Data Acquisition through the Telecommunications Network tel005185 AREVA SDH MSE 5xxx tel006186 AREVA PLC5000 tel007197 AREVA PLC 1790 tel008187 AREVA PDH DXC5000 tel009188 AREVA MiCOM T390 tel010189 AREVA DIP5000 Analog/Digital tel012190 Optical Fiber within a Transmission network tel022197 ALCATEL SDH 1650 tel001191 ALCATEL PDH 1511BA and 1515CX-C tel002192 PHILIPS PABX Sopho iS3000 tel004197 AREVA LMU5000 tel011193 AREVA SDH Networks tel020194 AREVA PDH Networks tel021
21957 HUAWEI SDH OSNxxxx tel023197 AREVA GC305 tel024197 AREVA TA314 Analog tel025197 AREVA TS313 tel026
neW 21967 AREVA e-DXC tel027
neWneWneW
WeBWeBWeB
WeB
WeB
WeB
WeBWeB
WeBWeB
WeB
WeB
WeBWeBWeBWeBWeBWeBWeB
alstom grid technical institute
14 • Alstom Grid Technical Institute: more than just training 16 • competence management: the ultimate training experience 18 • e-Learning: training to meet individual needs
To face electrical incidents, operations outages, blackouts, and the costs that go with these, there is one logical solution: Training. Indeed, training has the quickest and the strongest return on investment rate when it comes to increasing your company’s personnel competencies and enhancing your current electrical installation performance.
trainingis pOWer
14 I Globa l Tra in ing Offer
technical institute
A determination to get more from electrical installations underpins the trai-ning that accompanies electrical products and solutions throughout their lifespan. Our customers expect us to provide training that takes into account their environment, their specifi c characteristics and their limitations. It is a real feat to fi nd the right balance between theory, practical application and the right level of technical information in order to offer training that is adapted to the daily needs and technical knowledge of participants in a multicultural and multilingual context. Alstom Grid Technical Institute is an international training center geared up to meet this challenge. To do so, Alstom Grid Technical Institute uses its internationally renowned expertise in product design, installation and maintenance and training experience that has been bearing fruit for thirty years.
Immediate return on investmentThe effectiveness of training is measured in terms of staff operational performance in their daily work. One of the main advantages of our training programs is their quick return on investment. The practical part of our training programs is based on hands-on applications that enable participants to make immediate use of their newly acqui-red knowledge, know-how and skills when they return to their jobs. Alstom Grid Technical Institute training courses were designed with so much concern for optimizing costs that some modules can be followed at a distance, without any travel expenses attached. This e-Learning solution is accessible online, anywhere in the world, via Internet.
Expert trainers who make the differenceAlstom Grid Technical Institute has a pool of 60 trainers, supported by a 20-person team spread across 12 countries. Our trainers are all expe-rienced in their areas, but in addition to this, they know how to teach and are always up-to-date with the latest technological advances. Their exper-tise is made complete by a solid experience in the fi eld, allowing them to be in close contact with trainee concerns and preoccupations. They have constant contact with course participants, allowing them to continually improve the training tools and techniques they use to ensure that all trai-nees are totally motivated and participate fully. Our trainers endeavor to communicate their expertise and experience. The trainee/trainer rela-tionship is key, and is a decisive factor is a successful training.
Training for each specifi c needYou may be in the public sector or industry, be seeking to train mana-gement, engineering, installation, operational or maintenance staff, be a novice or very experienced in electrical installations and grids. You could be looking for training in electrical safety, installation design, operation and maintenance, protection, supervision, or even grid management. Whatever your situation, Alstom Grid Technical Institute has a training course to meet your needs amongst the 200 standard programs listed in its catalogue. Individuals can register in one, or several, of the 200 courses found in the catalogue, to parti-cipate in an open, blended training course, taught on our premises on set dates. These courses are modular, making them perfectly adapted to your company’s own training program. However, when a same company, or department, registers a group of people, we suggest you
ALsTom GRID TEchNIcAL INsTITUTE: moRE ThAN JUsT TRAINING
Globa l Tra in ing Offer I 15
take a tailored course. This enables us to organize a tailored program taught either in our premises or yours (requiring that equipment be de-energized) on the date of your choice.Alstom Grid Technical Institute also offers qualifying training as part of a Competence Management process (see pages 16-17). Alstom Grid Technical Institute also provides its services to public ser-vice fi rms that want to set up their own training centers, with offers of training support: “training and assessment methodology” (course design and teaching), “training tools”, “quality procedures” (ISO 9001 compliance), “safety training courses”, “e-Learning” and transfer of “electrical equipment apprenticeship”.
International training centersEvery year, our training centers provide 20,000 man-days of training, or an average of 4,300 full days of training a year.
Benefi ts for Alstom Grid Technical Institute trainees:• Practical training on full-sized equipment for a better learning experience.• Training premises near Alstom Grid establishments in order to have a better understanding of the products and to keep your installations live during training.
• Fully equipped, modern training rooms to learn in the best possible conditions.
• Individual technical documentation to consult during and after the training.
• Internet access to stay in contact with one’s professional and personal life.
The international expertise center, the Technical Institute in Aix-les-Bains, France, hosts trainees in a 1,200-square meter area dedicated to practical training on full-sized equipment.
GOOD EQUIpmENT + =GOOD
sKILLsopERATIoNAL EXcELLENcE
Redmond Montreal stafford
Lattes
Aix-Les-BainsMassy
OberentfeldenGebze
Dubaï
suzhou
Noida
chennai
singaporeBrazil
usa
canada
francesWitzerland
china
india
turkey
unitedaraB
emirates
singapOre
uk
são paulo
15 centers tO get clOser
chilesantiago
16 I Globa l Tra in ing Offer
Operational excellence is the ambition of all enterprises. In the power industry, companies can only attain – and sustain – operational excel-lence by focusing not only on their installations, but also on their staff’s continued improvement and skills enhancement. That is precisely the purpose for which Alstom Grid designed its top-of-the-line training program: Competence Management.
The Alstom Grid Competence Management program is tailored to customers’ specifi c training needs. It is an extremely in-depth program that homes in on the skills and knowledge a customer needs to main-tain its installation in optimum operating condition. And since it is designed to train people to the highest skill level, it also serves to boost employees’ career development programs, leading them to become certifi ed technical leaders.
how it worksThe Competence Management program is designed for customers who need to train a team of several (more than fi ve) technical specialists who need to train a team of several (more than fi ve) technical specialists
in a certain discipline or group of disciplines to expert level. It could cover such areas as safety, networks, HV, power transformers, auto-mation or even the full range of GIS skills. It starts with a thorough assessment of existing skills, which is then used as input to determine the training modules needed, and to design and prepare them. Some-times, if the knowledge base of the trainees varies greatly, training can be split into different levels.
Based on the assessment results, the training program is then prepa-red. This is a major investment in time and effort in selecting the appropriate training materials, adapting them to the specifi c customer needs in question, and even creating completely new training material to fi t the company, the trainees’ needs and the defi ned objectives.
Once the content and schedule are agreed, the training can start. Initially, this will take the shape of e-Learning modules, which also serve to ensure the trainees’ motivation, since they require a certain personal investment.personal investment.
competence management
compETENcE mANAGEmENT: ThE ULTImATE TRAINING EXpERIENcE
1 2 3 4
analysingNeeds
Analysis / Evaluation
quiz
preparingCourse design
e-Learning / Planning
teachingLearning &
TrainingApplication at
customer’s site
qualifyingEvaluation quiz
Knowledge validation
to check knowledge acquisition and
deliver a competence certifi cate
to evaluate trainees’
knowledge level
to optimize the course
to learn required skills
certificatiOn
Globa l Tra in ing Offer I 17
Then the training proper begins. It will be delivered at one of the 15 specialized worldwide Alstom Grid training centers – the one that best matches the particular skills needs in question. These training centers are located at or close to Alstom Grid plants and so are able to deliver hands-on as well as classroom training. Depending on the topics covered, this phase can vary considerably in length. The training also includes interspersed assessments to evaluate the participants’ progress and their achievement of objectives.
The third part of the program takes place at the customer’s site. This gives the trainees the opportunity to learn and practice on their own equipment and in their own working environment.
QualificationThe Competence Management training concludes with a final assess-ment. This reflects the progress made by the participants and the achievement of the objectives of the program. Only after successful completion of the program and the final assessment is the Competence
Certificate handed over to the participant. This document is no mere attendance certificate, but a true Competence Certificate that gua-rantees the training quality and certifies that the individual has indeed acquired the skills required.
18 I Globa l Tra in ing Offer
e-Learning solutions offer fl exible distance training, allowing your teams to optimize their training time. Our e-Learning programs cover topics related to transmission and distribution, energy quality and electrical risk prevention. Alstom Grid has chosen a new teaching approach called approach called blended trainingblended training, which applies to the majority of our training courses., which applies to the majority of our training courses.
e-LEARNING: TRAINING To mEET INDIVIDUAL NEEDsDiscover our e-Learning demo space online at www.grid.alstom.com/training
e-learning
e-learning to support class-room training
e-Learning is used in addition to classroom teaching, giving trainees the possibility to prepare before classes, so they can get the most from the training and from the trainer’s experience.
Before. e-Learning makes it possible for trainees to prepare for the training course on their own, introducing them to the key points of the course and, where needed, bringing participants’ knowledge up to speed in a given area.
after. Trainees have access to online training content for a year. This allows them to deepen their knowledge and to use T&D documentary resources (online dictionary, standard glossary, etc.)
• Trainees can work on their own• Training time is optimized: trainees
are well prepared and can take full advantage of the training time
• Long-term benefi ts include access to content for a year
1
adVantages
tutored e-learning Tutored blended training is a new, entirely personalized training approach. Trainees have contact with a tutor for support for the entire period of their training.
Before. There is an initial telephone appointment with a tutor, which enables trainees to assess their current knowledge and defi ne a tailored training program based on their expectations and needs.
during. Trainees follow their training at their own pace. At any time, they can contact the tutor for answers on any training-related questions.
at the end of the course. To go further in a topic of their choice, trainees benefi t from the expertise of a technical consultant for an hour-long telephone call.
• A tailored program• Distance learning, but with support• The benefi ts of technical consultant
expertise
adVantages
2 “À la carte” e-learning e-Learning can be chosen based on a trainee’s needs and available time, to get training in a specifi c technical area in a matter of hours “4 to 5”. It can be used to study up on old knowledge or boost competencies, and responds instantly and effectively to trainee expectations.
3
Globa l Tra in ing Offer I 19
BLENDED TRAINING = +e-LEARNING
pRoGRAmsINTERAcTIoN wITh A TRAINER(theoretical course/practical application/tutoring)
“Customer testimonials
demo space onlinewww.grid.alstom.com/training
“The ‘Electrical energy step by step’ training course helped me in a number of ways, including structuring the knowledge I already had and learning about transmission equipment.”
“The training course was very instructive on transmission and distribution networks. I became familiar with vocabulary and issues that I did not know about. The training tool and its content are really high quality.”
“This is a very useful tool to resolve problems, such as if I want to check equipment compliance. I also use it to refresh my general knowledge on transmission and distribution.”
“Tutored training enabled me to gain better understanding of electrical transmission equipment and the energy sector.”
“The meeting with the technical consultant gave me a better understanding of smart grids and their technical impact.”
electrical safety 23 • Electrical Risk prevention Tool s100124 • Electrical safety for non-electricians F101025 • Electrical safety for electricians working at Low Voltage F102026 • Electrical safety for electricians working at Low, medium and high Voltage F1030
safety in hazardous areas (ateX)
27 • safety in explosive atmospheres for workers F502028 • safety in explosive atmospheres for managers and supervisors F5030
29 • Additional programs
NEw
When working in electrical environment, it is a duty to have full knowledge of safety rules to apply them. Not only is this knowledge vital for the analysis and risk management of the various tasks to be performed, but it is essential for the employee’s safety and for those he supervises.
safety & risk
preVentiOn
Non-electrician working in an electrical environment ref. F1010
Electrician working < 1 000 V ref. F1020
Electrician working > 1 000 V ref. F1030
Aligned with the French publication (UTE c18-510)
Electrical safetyWorking safely in an electrical environment relies on four parameters:• be qualified in Electrical Safety• know the electrical installation• wear appropriate Personal Protective Equipment (PPE)• have a regular practice of electrical workThe first two can be acquired through training and the last two are mandatory to reach the “zero accident” objective.
According to Health & Safety organizations statistics, 80% of accidents are due to behavioral issues.With this in mind, Alstom Grid Technical Institute set a training methodology based on practicing on real scale equipment.
Concerning the electrical risk, to reinforce your zero accident policy, our international safety experts have designed a specific e-Learning program to enable people to:• Test themselves• Have a refreshment of their knowledge• Receive more in-depth training according to their level of knowledge, at their own pace.
Training and self assessment are closely linked to allow the trainee to be aware of what is at the stake, to learn fundamental rules and or be sure to master them…Every three years, a refresher course is recommended.
safety in hazardous areas (ATEX)Explosive atmospheres are a major risk to the employee in hazardous areas. In order to preserve the health and safety of the workers dealing with electrical equipment installed in these areas, a company should comply with three more obligations:• be qualified in ATEX• use ATEX certified equipment• have installations regularly audited and certified for this risk.
The first can be acquired through training, and the last two are, as well as for Electrical Safety, mandatory to reach the “zero accident” objective.
Alstom Grid Technical Institute has real auditor trainers amongst whom, some are certified by INERIS (French National Institute for Industrial and Environmental Risk).
All training courses proposed in this Safety section are based on the trainers’ and trainees’ experiences as well as real case studies.This is done this way so that trainees can acquire and increase their awareness of the correct behavioral attitude to adopt to minimize risks.
mATchING yoUR NEEDs
22 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 23
price
Customer Benefi ts
Contact us
~ 4 hours
F1010 F1020F1030
s1001 100% theoretical
Local authorization and qualifi cation required to workon an electrical system
• Any person and company working in an environment with electrical risks
• Managers whose teams work in such environments
• Health & Safety Managers
objectives• Refresh knowledge on the
fundamentals of electrical risk• Learn a minimum number of common
international rules concerning electrical risk prevention
• Go through a quick and effi cient self-assessment on these topics
course Topics • Module 1: Learn about electrical risk• Module 2: Learn how to prevent
electrical risk• Module 3: Comply with safety
procedures (to lock out – tag out)
• Self-assessment• Various interactive learning activities• Summaries• Assessments are readily available
but can be customized to your needs, upon request
• Easy user navigation
Dates & Place
Anytime, anywhere as long as you have internet access
• Possibility to do this training course on your own site and at your own convenience
• Most of the common international rules are dealt with in this training
• Up-to-date contents according to current active regulations
• Designed by international safety experts• Training accessible 24/7
s1001Electrical Risk prevention Tool
design
installatiOn
OperatiOn
maintenance
management
NEw
24 I Globa l Tra in ing Offer
Customer Benefi ts
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
Customer Benefi ts
price
Contact us
2 days
s1001F101020% practical80% theoretical
No technical background required
• Non-electricity specialist who has basic access to electricity sites
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Half a day dedicated to practical work• Upon completion of this course,
participants will receive a certifi cate showing the electrical safety level they have achieved
objectives• Acquire a basic knowledge of working
with electricity, so that the trainees are aware of the dangers that they may encounter in an electrical environment
• Act and react according to the working environment
course Topics • Electricity and its benefi ts, use and
dangers• How do we protect ourselves against
potential danger?• Examples of accidents that have
happened and how they could have been avoided
• The safety rules for electrical work• Participant evaluation for certifi cation
Electrical safety for non-electriciansF1010
Customer Benefi ts
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 25
price
design
installatiOn
OperatiOn
maintenance
Contact us
3 days
s1001 F1020 30% practical70% theoretical
Basic knowledgeof electricity andLV electrical experience
• Workers who have a direct involvement in Low Voltage electrical work
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• A day dedicated to practical work• Role-play exercises demonstrating the
importance of safe conduct• Upon completion of this course,
participants will receive a certifi cate showing the electrical safety level they have achieved
objectives• Work safely when carrying out Low
Voltage electrical work such as installation and measurement
course Topics • Electricity and its benefi ts, use and
dangers• How do we protect ourselves against
potential danger?• Working with Low Voltage electrical
safety: general instructions• Practical simulation of potential
dangers/accidents• Testing Low Voltage electricity• Participant evaluation for certifi cation
Electrical safety for electricians working at Low VoltageF1020
26 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenanceprice
Contact us
4 days
s1001F1030 40% practical60% theoretical
Basic knowledge in electricity and LV, MV and HV electrical experience
• Electrical staff working in Low and High Voltage (non-managerial electrician and/or work supervisor and/or lockout supervisor and/or operation supervisor)
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• During the training session, interactivity
between a small group of trainees allows a smooth evaluation of the trainees’ progression
• A day and a half dedicated to practical work
• Upon completion of this course, participants will receive a certifi cate showing the electrical safety level they have achieved
objectives• Evaluate the danger of electricity• Execute some specifi c operations
on LV & HV installations in safe conditions
course Topics• Electricity and its benefi ts, use and
dangers• How do we protect ourselves against
the potential danger?• General instructions for working with
Low, Medium and High Voltage electrical safety
• Practical simulation of potential dangers/accidents
• Testing electricity Low and Medium Voltages
• Participant evaluation for certifi cation
F1030Electrical safety for electricians working at Low, medium and high Voltage
Customer Benefi ts
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 27
design
installatiOn
OperatiOn
maintenance
management
Customer Benefi ts
price
Contact us
1.5 day
F5030 F5020 20% study case80% theoretical
Electrical and mechanical fundamentals
• Persons supervising installation, operation or maintenance on a hazardous area installation concerned by the risks of Explosive Atmosphere (ATEX), under supervision
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Theoretical training and exercises
with an INERIS* certifi ed trainer• Exchange of experience and acquiring
the right behavior• Evaluation by questionnaire,
and Competence certifi cate issuedby INERIS
* INERIS: French National Institute for Industrial and Environmental Risk
objectives• Gain or increase knowledge required
for the design, achievement and maintenance of electrical and mechanical installations (equipment) in (ATEX) potentially Explosive Atmospheres, according to the required standards
• Ensure that equipment repair does not downgrade its safety level
• Provide traceability of repair
course Topics • The Explosive Atmosphere (ATEX)
approach• Generalities on Explosive Atmospheres
(ATEX), Gas and Dust• The mechanism of an explosion
• Comparison between different applicable standards (IECEx, CENELEC, NEC500 and 505)
• Exploding risk area Classifi cation (Gas and Dust)
• The different types of protection for electrical ATEX equipment (d, m, ia, ib…)
• The different types of protection for mechanical ATEX equipment (d, c, k…)
• The marking of the equipment• Incidences for use and maintenance• The intervention in ATEX Hazardous
Areas• Initial Assessment by questionnaire• Exercises (marking plate of the
equipment reading, appropriateness (suitability) of the equipment, initial Assessment by questionnaire)
safety in explosive atmospheres for workersF5020
28 I Globa l Tra in ing Offer
Customer Benefi ts
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Dates & Place
price
Contact us
4 days
F5030 30% practical70% theoretical
F5020 Electrical and mechanical fundamentals
Person technically responsible for an installation in an explosive area (ATEX):
• Engineer• Project and design manager• Supervisor responsible
for workers in an explosive area
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Theoretical training and exercises
with an INERIS* certifi ed trainer• Exchange of experience and acquiring
the right behavior• Pratical test performed in the INERIS
laboratories (60 kms north of Paris) with several explosion tests in gas, dust, and electrostatic conditions
• Evaluation by questionnaire, and Competence certifi cate issued by INERIS
* INERIS: French National Institute for Industrial and Environmental Risk
objectives• Gain or increase knowledge required for
the design, achievement and maintenance of electrical and mechanical installations (equipment) in (ATEX) potentially Explosive Atmospheres, according to the required standards
• Ensure the ATEX safety welcoming at site• Ensure that equipment repair does not
downgrade its safety level• Make all operators aware of their responsibilities• Supervise workers in an explosive atmosphere,
and ensure the traceability of repairs• Issue the permit to work in an explosive
atmosphere
course Topics • The Explosive Atmosphere (ATEX) approach• Generalities on Explosive Atmospheres (ATEX),
Gas and Dust• The mechanism of an explosion• Comparison between different applicable
standards (IECEx, CENELEC, NEC500 and 505)• Exploding risk area Classifi cation (Gas and
Dust)• Risk analysis according to area and equipment• The different types of protection for electrical
ATEX equipment (d, m, ia, ib…)• The different types of protection for mechanical
ATEX equipment (d, c, k…)• The rules applicable to gas (G) ATEX equipment• The rules applicable to dust (D) ATEX
equipment• The rules for design, achievement, and
maintenance of installations in Explosive Atmospheres
• The marking of the equipment• Incidences for use and maintenance• The intervention in ATEX Hazardous Areas• Worker health and safety protection from
explosive atmosphere hazards• Exercises (calculation of intrinsic loop,
appropriateness (suitability) of the equipment,area classifi cation analysis, marking plate of the equipment reading)
• Initial Assessment by questionnaire
F5030safety in explosive atmospheres for managers and supervisors
Globa l Tra in ing Offer I 29
Additional programs − Available on demand
The following training programs are available on demand. Please don’t hesitate to contact us.
electrical safety
s1001 Electrical Risk Prevention Tool − Spanish version
s1001 Electrical Risk Prevention Tool − French version
s1001 Electrical Risk Prevention Tool − German version
safety in hazardOus areas (ateX)
f5001 Introduction to explosive atmosphere risks
WeB
e-learning courses 33 • hV power transmission ( > 50 kV) e-Learning training modules s320034 • mV power distribution ( > 1 kV) e-Learning training modules s330035 • Introduction to Energy management systems e-Learning training modules s4111
technical Fundamentals
36 • Electrical Energy Essentials GEE00237 • power system Engineering GEE00438 • Voltage stability GEE00739 • Fundamentals of power system protection PROG00140 • Grid connection protection PROG01141 • medium Voltage industrial installation design A211242 • Fundamentals of power Transformers A421343 • Instrument Transformers A531244 • Digital Instrument Transformers (DIT) M108/A531345 • Fundamentals of the high Voltage circuit breaker A550346 • Fundamentals of the generator circuit breaker within its electrical environment A910347 • Basic hVDc Training hVDc00148 • Apps – Industry power system protection PROG002
protection & substation control
49 • Apps – Utility power system protection PROG00350 • Advanced power system protection PROG00451 • Apps part 1 – power systems protection PROG00552 • Apps part 2 – Application of protective Relaying to Transmission systems PROG00653 • Apps part 3 – overcurrent Grading and commissioning PROG00754 • Apps combined course 1 (part 1 + part 2) PROG00855 • Apps combined course 2 (part 1 + part 2 + part 3) PROG00956 • Apps To1 – Introduction to the protection scheme philosophy for mV and hV Networks PROG01257 • Apps – Utility Transmission power system protection – Basic PROG01358 • Apps – Utility Transmission power system protection – Advanced PROG01459 • Apps – Utility Transmission power system protection – Expert PROG015
network Management
60 • power Network Essentials GEE00361 • First Line system maintenance EmsG00362 • situation Awareness in control centers for Real-Time operations of power systems and markets GEE00663 • Introduction to smart Grid GEE00864 • control center Architecture GEE00965 • Troubleshooting GEE010
telecommunications
66 • Telecommunications in a power Network TEL013
67 • Additional programs
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
To optimize your electrical installation you can limit productionoutages, improve power quality and better manage disturbances that could lead to defaults. In order to achieve this, a good knowledge of electrical design is needed, but an understanding of the latest technological developments is critical.
Knowledge & design
32 I Globa l Tra in ing Offer
To meet your installation needs, including new installations and/or modifications or extensions of existing ones, Alstom Grid Technical Institute proposes training courses that cover:• different installation types and architectures• all voltage levels• installations equipped with, or without, Alstom Grid products• your specific installation.
Alstom Grid Technical Institute ensures the most effective training methods for its clients. This is done by providing the technical exper-tise to the trainee in a progressive way. Here are the steps we suggest:
• e-learning is proposed to the trainee at the discovery phase. This way of training allows the learner to acquire the fundamentals and useful information at his own pace. The trainee can define his pro-gram over a variety of modules. It can be covered in a couple of hours, or up to fifty.
• technical seminars are set to help the trainee focus on a specific topic, in order to deepen and/or update his knowledge.
• installation design courses offer the possibility to understand the installation operation principles, even at a downgraded mode, in relation with the standards and rules.
• network Operation courses are designed to help the trainee reach an advanced stage of knowledge that will allow them to go beyond installation and substation expertise and to acquire a global view on the network operations.
your installation at the heart of our training process!This training offer can also be adapted to your own specific electrical installation.Alstom Grid Technical Institute’s expert trainers can study, in full confi-dentiality, your installation schemes, specification, technical data and operating procedures, to create and deliver customized teaching mate-rial that will optimize the competencies of your personnel.
Whatever training curriculum is chosen, the trainee will be sensitized to normal and fault conditions of network and installation operation. We are convinced that after our training the trainee will better analyze situations and find out the appropriate solutions.
matching your needs
Globa l Tra in ing Offer I 33
prOfiles audience learning path duratiOn
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Contact us
17 modules ± 1h
s3300 s3200 100% theoretical
Basic knowledge in electricity
• All persons wanting to start learning about the principles of the transmission network
Dates & Place
Anytime, anywhere, as long as you have internet access
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced tutor• Assess and train newcomers• Improve and homogenize team
members’ knowledge• Share technical issues and references
within multi-disciplinary or multi-site teams
• Self-assess knowledge acquisition through quizzes during the learning process
objectives• Understand the transmission network
growth and operating conditions• Understand the various technologies
related to substation equipment• Characterize the various structures and
master the substation operating conditions
course Topics Transmission network in Europe• Interconnection timeline• Organization & network operator• Energy exchanges & managementsubstation technologies• HV substations• Power transformers• HV Circuit breakers• HV disconnectors & surge arresters• HV GIS
Architecture of hV substations• HV substations structure & diagrams• Step-up substations• HV interconnect & transformer
substationssubstations operating safety & reliability• Instrument transformers• Protection & control• Auxiliary serviceshV overhead lines & cables• Functions & structure• Sizing• Construction
• Available assessments• Easy user navigation• Various interactive learning activities• Online dictionary on transmission
and distribution
hV power transmission (> 50 kV) e-Learning training modules
s3200
Customer Benefi ts
34 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Contact us
15 modules ± 1h
s3200s3200 Basic knowledge in electricity
s3300 100% theoretical
• All persons wanting to start learning about the principles of the distribution network
Dates & Place
Anytime, anywhere, as long as you have internet access
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced tutor• Assess and train newcomers• Improve and homogenize team
members’ knowledge• Share technical issues and references
within multi-disciplinary or multi-sites teams
• Self-assess knowledge acquisition through quizzes during the learning process
objectives• Understand the evolution in time,
the constitution, and the role of distribution networks
• Understand the various technologies associated with the components of the network
• Characterize the various structures and to index the distribution layouts
course Topics Distribution networks• Distribution in the electrical network• The people involved in deregulation• Constitution of the distribution networksubstation equipment• Transformers• MV switchgear• Associated equipment
structure & network circuit diagrams• Topology• Overhead and underground networks• MV wiring systemsprotection systems• Overcurrents• Neutral systems• Earthing connection diagramsIndustrial networks• Architecture & voltage levels• Power supply sources• The railway electrical network
• Available assessments• Easy user navigation• Various interactive learning activities• Online dictionary on transmission
and distribution
mV power distribution (> 1 kV)e-Learning training modules
s3300
Customer Benefi ts
prOfiles audience learning path duratiOn
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Globa l Tra in ing Offer I 35
Contact us
3 - 4 hours
s4111 100% theoretical
None
• Anyone who will be working with an Energy Management System in the Electric Power Generation, Transmission, or Distribution industries
Customer Benefi ts
Anytime, anywhere, as long as you have internet access
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Upon completion of this course, students will be able to describe electric power and the grid, power systems, transformers, frequency, phase, electrical regions (islands), power pools, power transfer, contributions of early fi gures in electricity, contributing factors in the development of the electric grid in North America, events that triggered the need for an energy management system (EMS), power system connections, operating area, control centers, SCADA, power system protection and dispatcher training
• Student quizzes
objectives• Introduce students to an overview
of electric energy, the power grid, and the management of electricity through an Energy Management System
• Review electricity and a physical electrical system as well as the monitoring and control of such a system through an Energy Management System deployed from a respective system control center
course Topics • Electricity and electric power systems• Early infl uential fi gures in electricity
in North America• History of the electric grid in North
America• Managing the grid• Information fl ow in the grid• Generation control center• Transmission control center• Distribution control center• Energy control center• Dispatcher training center• Engineering and planning
Introduction to Energy management systems e-Learning training modules
s4111NEw
36 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
price
prerequisites training neXt step
Contact us
2 days
GEE002 100% theoretical
None
• Management and staff who will benefi t from knowledge of power systems in the electric energy domain
management
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
participants will be able to understand the high-level power system components and interactions within the electric energy industry
• Managers are expected to be comfortably conversant in this industry and be better equipped to make more informed decisions
• Staff members completing this course are expected to have the required knowledge to better contribute and be more informed in workplace situations
objectives• Give an overview of the electrical
power network from its generation to its distribution (primary functions of power system components)
• Explain some aspects of regulation, deregulation, trading, safety and environment of the electrical energy industry
• Describe the principles involved in operation of interconnected power systems, economic considerations for interchanging power between systems, control methods, and reliability considerations
course Topics • Discussions on the electrical energy
industry, including renewable energy• The societal impact of blackouts• The environmental impact of
generating electricity and its economic considerations
• Aspects of policies and their implications
• In-depth look at generation, transmission, distribution and their interdependencies
Electrical Energy EssentialsGEE002
Customer Benefi ts
prOfiles audience learning path duratiOn
price
prerequisites training neXt step
Globa l Tra in ing Offer I 37
Contact us
2 days
AppsGEE004 100% theoretical
Basic knowledge of electrical engineering
• Engineers and managers involved in protection technology
management
Customer Benefi ts
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
participants will be able to understand the high-level power system components and interactions within the electric energy industry
• Participants will have the required knowledge to really improve their contribution in their work
objectives• Refresh and update the trainees’
knowledge about electrical engineering
course Topics • Basic power systems technology• Three-phase current network• Capital assets characteristics• Energy transference in the three-phase
current network• Short-circuit• Physical phenomena
power system EngineeringGEE004
Dates & Place
38 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 2 days
GEE007 100% theoretical
None
• Management and staff who will benefi t from having a high-level knowledge of situation awareness in control centers
management
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
participants will learn in detail the methods of voltage control and reactive planning in transmission networks
objectives• Give a comprehensive overview
of voltage stability problems • Teach methods to effectively address
these problems in the planning, design and operation of electric power systems
course Topics Introduction and basic concepts• Defi nition and classifi cation of power
system stability• Conceptual relationship between power
system stability, security and reliability• Review of the concepts of active power
and reactive power
• An elementary view of the voltage stability phenomenon
Equipment characteristics impacting voltage stability• Synchronous machines• Excitation systems• AC Transmission• Power system loadscontrol of reactive power and voltage• Control objectives• Production and absorption of reactive
power• Methods of voltage control• Principles of reactive compensation
in transmission systems• Static and dynamic compensatorsTypical scenarios of voltage instability• Long-term voltage instability• Short-term voltage instability
Voltage stabilityGEE007
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Globa l Tra in ing Offer I 39
2 days
PROG004 PROG001 100% theoretical
Persons attending this course must have a basic understanding in electrical theory
• People with little or no previous experience in protection
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
the participants will be aware of the protection principles needed to understand system requirements
• Gives participants the confi dence to maintain systems
• This course suits all profi les with a minimum of electrical theory
objectives• Provide a basic understanding
of the application of protection to systems and plant, such as lines, transformers, generators & motors
course Topics • Protection fundamentals• Basic application principles• Introduction to overcurrent protection• Differential protection• Generator protection
Fundamentals of power systemProtection
PROG001
Contact us
Dates & Place
PROG001
40 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 1 day
PROG004PROG01150% practical50% theoretical
Basic understanding of electrical principles and associated mathematics
• Engineers/technicians, commissioning/test engineers
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
participants will have a better understanding of grid connection & islanding protection relays and their settings
• Will get ideas on basic commissioning procedures and operation of grid interconnection relays
objectives• Understand grid connection protection
(G59), environment and context
course Topics • Grid connection protection overview• Protection relays: defi ne the main
protection relays and their settings• Alstom Grid solution presentation• Introduction to grid connection
protection MiCOM P341• MiCOM P341 basic commissioning
procedures and operation
Grid connection protectionPROG011
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 41
3 or 4 days
D2102 A2112 40% study case60% theoretical
Qualifi ed technician, 2-year university technological diploma or completion
• Engineers and technicians involved in the design, study, modifi cation, maintenance and operation of MV industrial installations
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Customize the solutions for
troubleshooting (malfunctioning and/or fault mode) and modifi cations or extensions
objectives• Design a MV electrical installation• Estimate the value of short circuit
currents• Select the appropriate switchgear• Select the appropriate electrical
ductwork
course Topics stages in the design of an installation• Installation standards• List of equipment used, power balance
selection of power supplies: normal, substitute emergency
• Selection of neutral point connectioncharacteristics of current-using equipment• Motorscharacteristics of various power sources• Defi nitions of the switchgear, symbols
• Distribution networks, transformers, generator set
Estimation of short circuit currents• Three-phase short-circuit at one point
on the network• Two-phase short-circuitselection of switchgear• Isolator switch, load break switch,
contactors fuses, Circuit breakersselection of wiring systems• Steady state operating conditions,
transient operating conditionsIndustrial networks• Connection to the grid, compensation
for reactive energy• Structures, neutral point connection,
earthing faults• Protection systems, selectivity: current,
time delay and logic relaysprotection of power transformers case study
A2112medium Voltage industrial installation design
42 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 3 days
TIR066 s3601Working in a T&D environment, and/or with a degree in Electrical Engineering or equivalent
A4213 100% theoretical
• Engineers involved in the design and application of transmission networks
• Graduate engineers entering the industry
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants should gain from the
course an increased level of knowledge in the design and application of transformers in both transmission and industrial application
• A wide overview of what power transformers are today and what the future will be through new solutions
• One year access to S3601 e-Learning training programs accessible 24/7 through our LMS (if required)
objectives• Become conversant in the
fundamentals of transformer design, and their application in transmission systems and industrial applications
course Topics Basic Transformer Theory• Principles, Core, Windings, LossesTransformer cooling• Cooling modesshort circuit withstand• Stresses and failure modesVoltage Regulation• OLTC, OCTC, Vacuum interrupter
tap-changersTransformer connections• Delta, Star, Zigzag
Transformer construction• Tanks, Conservators, Bushings, Cable
boxes, Current Transformers, Dehydrating Breathers
Transformer protection• Buchholz relay, PRV, Sudden pressure
relay, OTI, WTITransformer Testing• Factory and Field testings Transformer oil• Oil quality tests • DGA manufacturing & assembling process• Core, Windings, Bushings and
the other accessory assemblingspecial Transformers• Phase Shifting Transformers• HVDC Transformers• Rectifi er and Furnace Transformers• Shunt and Smoothing Reactors• Trackside Transformers• Continuously Emergency Rated (CER)
Fundamentals of power TransformersA4213
NEw
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 43
1 day
s3601 Electrotechnical fundamentals and grid protection
A5312 20% study case80% theoretical
M108/A5313s3601
• Consulting and protection engineers and technicians
• Project managers and fi eld technicians
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Whatever the size or design, current
transformers, voltage transformers, and combined current-voltage transformers are the essential link to the safety of your network, and this training will open up theirs secrets
objectives• Understand instrument transformers,
their technology and environment• Optimize their integration
in the HV and MV networks• Specify and select the appropriate
solutions in instrument transformers
course Topics Different types of instrument transformers• Current Transformers – CT• Voltage Transformers – VT• Combined Metering Units – CMU• Capacitor Voltage Transformer – CVTInsulation techniques• Paper-oil insulation• Resin insulation• SF6 insulation
Design parameters• Current transformer: nominal ratio,
short circuit current, accuracy class and burden, transient performance
• Inductive type voltage transformer: nominal ratio, accuracy class and burden, thermal power
• Capacitor voltage transformer: nominal ratio, accuracy class and burden, thermal power
• Special site & environmental conditionscommissioning and maintenance• Instructions for erection &
commissioning, recommendations for maintenance, accessories
Instrument TransformersA5312
44 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 1 day
s3601M108/A5313100% theoretical
A5312 s3601Basic knowledge in electrotechnical
• Consulting and protection engineers
• Project managers and fi eld technicians
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The reduced size and weight are
attractive benefi ts over conventional instrument transformers
• Easy placement in compact substations or in retrofi t applications
• Its broad dynamic range makes it particularly suited for applications where extreme accuracy at both full power output and station service draw is demanded
• It is the future ready solution for HV and UHV networks, with a complete new approach of the instrument transformers use
objectives• Understand Digital Instrument
Transformers, their technology and environment
• Know on product’s main characteristics and advantages
• Discover possible applications in existing or future networks
course Topics Digital Technology• Operation principles of DIT and new
level of accuracy• 61850-9-2 standard protocols
for communication between IT & electronic device
• Technology comparison with conventional equipment
• Perspective for HV and UHV networksDIT solutions commercially available to meet new networks challenges• NXCT – Optical Current Transformer• NXCM – Combined Metering Unit• NXCT-F3 Flexible Optical Current
Transformer• Merging Unit
Digital Instrument Transformers (DIT)M108/A5313
NEw
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 45
2.5 days
s3200 A5503 100% theoretical
Working in a T&D environmentIt is recommended to have a degree in electrical engineering or equivalent
• Engineers involved in the design and application of transmission networks and graduate engineers entering the industry
design
OperatiOn
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Gain confi dence in the correlation
between High Voltage network parameters and the associated key switchgear parameters in the compilation of switchgear specifi cations
objectives• Become conversant in the
fundamentals of High Voltage Circuit breakers
• Know the main elements of switchgear design, construction and testing
course Topics Types of disturbances on power systemsshort-circuit Theorycircuit interruption• Symmetrical/asymmetrical conditions• Arcing• Transient phenomenaInsulation, Interruption medium and Interrupter Design• Air and Oil• Vacuum and Sulphur hexafl uoride (SF6)circuit breaker Interrupters and operating mechanisms
• Interrupter principles and types• Mechanismscircuit breaker Types• Dead Tank and Live Tank (AIS)• Gas-Insulated Switchgear (GIS)• Mixed Technology Switchgear (MTS)capacitor and Reactor switching• Capacitor switching; reactor switching• Point on wave switchingcircuit breaker Testing and Interpretation• List of testing according standardsInstallation and commissioningmaintenance, condition monitoring, Decommissioning• Time based• Condition based• Monitoring devicesAssignment• Test resultshistory and Future of Transmission switchgear
Fundamentals of the high Voltage circuit breakerDigital Instrument Transformers (DIT)A5503
NEw
46 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
NEw
2 days
s3200 s3601
A9103 100% theoretical
Working in a T&D environment as well as power plants It is recommended to have a degree in Electrical Engineering or equivalent
• Engineers involved in the design and application of generator Circuit breakers and graduate engineers entering the industry
design
OperatiOn
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The trainee will get a clear
understanding of the interest and behavior of generator Circuit breakers from other equipment specifi cations involved together within power plants
objectives• Become conversant in the fundamentals
of the main equipment operating with a generator Circuit breaker
course Topics Generator circuit breakers• General & Introduction• Standard• Basic application• Product Range• Short circuit Requirementssynchronous Generators• Basic Theory• Types • Application• Characteristics• Short circuit Parameters• Transient Recovery Voltage• Out-of-phase • Delayed current Zero
worked Example from Annex A c37-013 IEEEGenerator transformers• Introduction• Explaining the Technology• Tap changers• Natural frequencysynchronizing, Automatic Voltage Regulators (AVR) and speed control• Synchronizing Principles • Principles of AVR’s• Generator Speed ControlGenerator Protection• Need for protection• Typical protection schemes
Fundamentals of the generator circuit breaker within its electrical environment
A9103
Customer Benefi ts
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Globa l Tra in ing Offer I 47
3 days
s3200 hVDc001 100% theoretical
Qualifi cation and and/or experience in power electronics
• Power transmission and distribution engineers
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Benefi ts and scope of HVDC
transmission• Awareness of HVDC technology and
applications• Technical understanding of HVDC
equipment• Scope of HVDC scheme specifi cation• Company with many years of experience
in the area
objectives• Describe the development and
fundamentals of the HVDC converter equipment
• Describe HVDC converter schemes equipment
course Topics • Introduction to HVDC• HVDC Fundamentals• HVDC Single Line Diagram• Introduction to HVDC Thyristor Valves• HVDC Thyristor Valve Components• Harmonics and Filters• Insulation Coordination• Overview of Digital Studies• Control and Protection of HVDC
Systems• HVDC Controls• Station Civil Engineering• Future Technologies in HVDC
hVDc001NEw
Basic hVDc Training
48 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 5 days
PROG004PROG002 100% theoretical
Persons attendingthis course must have a reasonable understanding of electrical theory
• Engineers/managers who already have experience in protection principles, but want to expand/update this knowledge in the area of distribution and generation power systems
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• On completion of the course, trainees
should have a suffi cient understanding of the aspects of protection covered during the course to enable them to liaise confi dently with specialist protection engineers concerning those subjects
objectives• Gain a comprehensive understanding
of the principles of selection and application of the most common types of protection found in distribution: MV/LV networks for Oil & Gas, Petroleum Company, steel, mining & metal industries
course Topics • Fault analysis tutorials• Detailed overcurrent grading/
co-ordination• Pilot wire differential protection• Power transformer protection• Generator protection• Motor protection• Busbar protection• Current transformer requirements
for protective relaying
Apps – Industry power systemProtection
PROG002
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 49
5 days
PROG004 PROG003 100% theoretical
Persons attending this course must have a reasonable understanding of electrical theory
• Engineers/managers who already have experience in protection principles, but want to expand/update this knowledge in the area of generation, transmission and distribution power systems
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• Reduce your maintenance costs and down time
• Handle your system operations effectively in all situations
• Focus on distribution, transmission and sub-transmission power systems for our utility customers
objectives• Gain a comprehensive understanding
of the principles of selection and application in the most common types of protection found in distribution, transmission and sub-transmission power systems
course Topics • Fault analysis tutorials• Detailed overcurrent grading/
co-ordination• Pilot wire differential protection• Power transformer protection• Distance protection• Busbar protection• Current transformer requirements
for protective relaying
Apps − Utility power system protectionPROG003
50 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 4 weeks
PROG004 100% theoretical
• Engineers who want to work in the protection industry It is recommended
that people attending this course have at least a degree in electrical engineering
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
the participants will have a better understanding of protection principles and application
• The participants will gain confi dence in electric system operations and protections
objectives• Teach aspects of protection for
applications with a more analytical approach than the basic course
• Cover fault analysis techniques and application considerations for feeders, transformers, generators & motors
• Address the principles of selection and application for the most common types of relay found in transmission systems
• Provide presentations and worked examples on distance protection, busbar protection, auto-reclosing and system stability
course Topics • Basic commissioning and maintenance
techniquesBasic fault calculationsRelays and protection schemes
power system grounding arrangementsApplication principles and setting procedures of: • Feeder protection• Motor protection• Generator protection• Transformer protection• Busbar protection• Distance protection• Distance protection schemesApplication examples and tutorialscurrent & Voltage transformer requirements for protectionAuto-reclose on Distribution systemsAuto-reclose on Transmission systemssystem stabilityFault analysis tutorials• Detailed overcurrent grading/coordination tutorial hands testing of overcurrent, differential, motor, generator and distance protection relays Protection for all voltage levels’ relays
Advanced power system protectionPROG004
Customer Benefi ts
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 51
3 days
PROG006PROG005 100% theoretical
Reasonable understanding of electrical theory
• Engineers who wish to gain more experience in protection setting & application of transmission protection
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• Reduce your maintenance costs and down time
• Handle your system operations effectively in all situations
• Gain knowledge to choose the suitable relay to match your system parameters
objectives• Teach aspects of protection for
applications with a more analytical approach than the basic course
• Cover fault analysis techniques and application considerations for feeders, transformers, generators & motors
course Topics Relays and protection schemesBasic fault calculationspower system grounding arrangementsApplication principles and setting procedures of: • Feeder protection• Motor protection• Generator protection• Transformer protection Application examples and tutorialscurrent & Voltage transformer requirements for protection
Apps part 1 − power systems protectionPROG005
52 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 1.5 day
PROG007 PROG006 100% theoretical
PROG005 Reasonable understanding of electrical theory
• Engineers who wish to gain more experience in protection setting & application of transmission protection
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• Reduce your maintenance costs and down time
• Handle your system operations effectively in all situation
• Worked examples for better understanding
objectives• Address the principles of selection
and application in the most common types of relay found in transmission systems
• Give presentations and worked examples on distance protection, busbar protection, auto-reclosing and system stability
course Topics • Application principles and setting
procedures of: distance protection, distance protection schemes
• Auto-reclose on Distribution Systems• Auto-reclose on Transmission Systems• System Stability• Application principles and setting
procedures of busbar protection• Application examples and tutorials
Apps part 2 − Application of protective Relaying to Transmission systems
PROG006
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 53
4 days
PROG007 100% theoretical
PROG006 Persons attending this course must have a reasonable understanding of electrical theory
• Delegates who require more tutorial time on fault calculations and application of overcurrent relays, together with knowledge of basic relay testing
design
installatiOn
OperatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• Reduce your maintenance costs and down time
• Handle your system operations effectively in all situations
objectives• Analyze fault and grade overcurrent• Teach Basic commissioning techniques • Test overcurrent, differential, motor,
generator and distance protection relays
course Topics • Fault analysis tutorials• Detailed overcurrent grading/
coordination tutorial• Basic commissioning and maintenance
techniques• Hands-on testing of overcurrent,
differential, motor, generator and distance protection relays
Apps part 3 − overcurrent Grading and commissioningPROG007
54 I Globa l Tra in ing Offer
Customer Benefi ts
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 5 days
PROG007 PROG008100% theoretical
Reasonable understanding of electrical theory
• Engineers who wish to gain more experience in protection setting & applications of transmission protection
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• Reduce your maintenance costs and down time, handling your system operations effectively in all situations
• In one week, participants will understand the full range of protections
objectives• Teach aspects of protection for
applications with a more analytical approach than the basic course
• Cover fault analysis techniques and application considerations for feeders, transformers, generators & motors
• Address the principles of selection and application in the most common types of relay found in transmission systems
• Give presentations and worked examples on distance protection, busbar protection, auto-reclosing and system stability
course Topics Relays and protection schemesBasic fault calculationspower system grounding arrangementsApplication principles and setting procedures of: • Feeder Protection• Motor Protection• Generator Protection• Transformer Protection• Distance Protection • Distance Protection Schemes• Busbar ProtectionApplication examples and tutorialscurrent & Voltage transformer requirements for protectionAuto-reclose on Distribution systemsAuto-reclose on Transmission systemssystem stability
Apps combined course 1 (part 1 + part 2)PROG008
Customer Benefi ts
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 55
2 weeks
PROG009 100% theoretical
Basic knowledge of electricity and associated mathematics
• Engineers who wish to gain more experience in protection setting & applications and additional tutorials on fault calculations and application of overcurrent relays, combined with knowledge of basic relay testing
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• Reduce your maintenance costs and down time
• Handle your system operations effectively in all situations
objectives• Teach aspects of protection for
applications with a more analytical approach than the basic course
• Cover fault analysis techniques and application considerations for feeders, transformers, generators & motors
• Address the principles of selection and application in the most common types of relay found in transmission systems
• Give presentations and worked examples on distance protection, busbar protection, auto-reclosing and system stability
• Analyze fault and grade overcurrent• Teach Basic commissioning techniques • Test overcurrent, differential, motor,
generator and distance protection relays
course Topics Relays and protection schemesBasic fault calculations
power system grounding arrangementsApplication principles and setting procedures of: • Feeder protection• Motor protection• Generator protection• Transformer protection• Distance protection• Distance protection schemes• Busbar ProtectionApplication examples and tutorialscurrent & Voltage transformer requirements for protectionAuto-reclose on Distribution systemsAuto-reclose on Transmission systemssystem stabilityFault analysis tutorialsDetailed overcurrent grading/coordination tutorial Basic commissioning and maintenance techniqueshands testing of overcurrent, differential, motor, generator and distance protection relays
Apps combined course 2 (part 1 + part 2 + part 3)PROG009
56 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 5 days
PROG012 100% theoretical
Knowledge and understanding of MV or HV electrical networksElectrotechnical and mathematical basis Technician or engineer level
• Maintenance and commissioning engineers, especially those involved with protective relays
• Protection engineers, protection design engineers
• Project manager
design
installatiOn
maintenance
management
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• The participants have increased understanding of protection principles used on industrial, distribution, generation or transmission system
• The participants gain the confi dence to maintain their system
objectives• Understand the protection schemes
of industrial, distribution, generationor transmission electrical networks
• Understand digital control system for MV/HV substations
course Topics • Electrical network topology• Electrical substation type & topology• Basic principles of protection schemes• Earthing mode/Short circuit current
and fault calculation• Overcurrent protection/directional• Transformer protection• Line protection• Distance protection• Differential protection• Motor protection• Generator protection• Busbar protection• Current transformers, voltage
transformers• Application examples for the
specifi cation of protection schemes• Introduction to digital control system
Apps T01 − Introduction to the protectionscheme philosophy for mV and hV Networks
PROG012
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 57
5 days
PROG014PROG013 100% theoretical
Knowledge and understanding of HV and EHV transmission networksElectrotechnical and mathematical basis Technician or engineer level
• Maintenance and commissioning engineers, especially those involved with protective relays
• Protection engineers, protection design engineers
• Project managers
design
installatiOn
maintenance
management
Customer Benefi tsCustomer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, sustain
the success of your business by enhancing employee effi ciency and morale
• Reinforce your company ’s expert knowledge
• The participants gain increased understanding of protection principles needed to understand HV system requirements
• The participants gain the confi dence to maintain their system
objectives• Understand the key principles
of protection in HV and EHV transmission networks
course Topics • Fundamental principles on protective
relays use• Fundamentals on protection principles• Short circuit currents• Power transformers and transformer
feeders protection• Line protection principles• Distance protection• Tele-action schemes• Line differential protection
Apps – Utility Transmission powersystem protection – Basic
PROG013
58 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 5 days
PROG015 PROG014 100% theoretical
PROG013Knowledge of HV and EHV transmission networks Electrotechnical Mathematical basis Technician or engineer level
• Maintenance and commissioning engineers, especially those involved with protective relays
• Protection engineers• Protection design
engineers• Project managers
design
installatiOn
maintenance
management
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Reinforce your company’s expert knowledge
• The participants will attain a high level of understanding in HV/EHV system protection schemes
• The participants become able to realize an optimal specifi cation of a protection scheme
objectives• Enhance the trainees’ knowledge
and understanding of HV and EHV transmission network protection principles
course Topics • Topology and architecture of power
transmission and distribution networks• Advanced module on power
transformer protection• Specifi c applications for transmission
system (breaker failure, recloser, check-synchro, power swing, fault locator, fuse detection, CT & VT supervision, trip circuit supervision)
• Busbar protection – Busbar differential schemes
• Earthing systems• Advanced module on short-circuit
currents
Apps – Utility Transmission power systemprotection – Advanced
PROG014
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 59
5 days
PROG015 100% theoretical
PROG013PROG014Knowledge of HV and EHV transmission networks Electrotechnical mathematical basisTechnician or engineer level
• Maintenance and commissioning engineers, especially those involved with protective relays
• Protection engineers• Protection design
engineers• Project manager
design
installatiOn
maintenance
management
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
sustain the success of your business by enhancing employee effi ciency and morale
• Set up expert knowledge in your company
• The participants reach an expert level on understanding and building HV/EHV system protection schemes
• The participants can realize an optimal specifi cation of a protection scheme
• The participants learn how to put into practice the full benefi ts of a protection scheme
objectives• Gain a global understanding
of phenomena and constraints infl uencing HV and EHV transmission network protection
course Topics • Generator protection• Selectivity, protection grading• Power system stability, auto-reclose,
load shedding• Current Transformers & Voltage
Transformers
Apps − Utility Transmission power system protection − Expert
PROG015
60 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Customer Benefi ts
5 days
GEE003 100% theoretical
Basic knowledge of electricity and associated mathematics
• Engineers who do not have a background in electrical engineering but are working, or are associated with, the electrical power industry
installatiOn
OperatiOn
maintenance
management
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
managers are expected to be comfortably conversant in this industry and better equipped to make more informed decisions
• Staff members completing this course are expected to have the required knowledge to better contribute, be more informed and improve their contribution in the workplace
objectives• Describe the electrical power
network or grid from the generation, transmission and distribution
• Gain further knowledge of each stage of the power fl ow and its components
• Gain in-depth knowledge of the electrical power system operations
• Cover the economic aspects of the electricity industry such as deregulation and trading
course Topics • The growth of electric power systems
in the industry• Components of power systems• Environmental impact of power
systems• Series of impedance of Transmission• Capacitance of Transmission Lines• Current and Voltage of Transmission
Lines• System modelling and network
calculation• Economic operations of power systems• Automatic control• System protection• Power system stability and power
quality• Interconnection failures and blackouts• Deregulation and power trading
power Network EssentialsGEE003
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
Globa l Tra in ing Offer I 61
customized
EmsG003 50% theoretical 50% practical
Basic knowledge of computer science
• Personnel in charge of maintenance and maintenance engineers
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
students will have a good understanding in the maintenance of an aspect of the EMS-SCADA System
objectives• Understand hardware architecture
(EMS – SCADA) • Know how to do basic hardware
troubleshooting • Know how to do preventive system
maintenance • Do daily maintenance on hardware
and software
course Topics Architecture: • Hardware (Tempo consulting)• Software (OS…) (ARES)• Network LAN/WANGhosting system and data back up Log activity
First Line system maintenanceEmsG003
62 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 2 days
GEE006 100% theoretical
None
• Management and Staff who will benefi t from having a high-level knowledge of situation awareness in control centers
management
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This intensive course will provide
participants with a solid understanding of the basics of Situation Awareness and key issues related to designing systems for situation awareness, as well as an overview of the tools and technologies for improving SA in control centers
• A review of the process used by utilities to defi ne requirements for control center SA tools will also be discussed
objectives• Cover the fundamentals of Situation
Awareness• Teach design strategies that can
increase the level of overall knowledge operators have about network status and environmental or man made hazards, in normal operation or on a crisis mode
• Give an overview of relevant EMS applications as well as how other Decision Support Systems (DSS) are used to improve Situation Awareness
course Topics • The basic concepts of Situation
Awareness (SA)
• Techniques for measuring SA• Application of SA techniques
in system design• Energy Management System
applications for SA improvement• Decision Support Systems (DSS)
for SA improvement• Defi ning requirements for designing
utility control centers• Requirements for control center
visualization tools• Emerging industry standards for SA• Emerging technologies for
improving SA• Techniques for capturing operators’
undocumented knowledge• Using captured knowledge in real-time
decision making• Examples of what some utilities
are doing to improve SA
situation Awareness in control centers for Real-Time operations of power systems and markets
GEE006
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Globa l Tra in ing Offer I 63
2 days
GEE008 100% theoretical
Interest in learning about the Smart Grid
• People interested in issues related to the Smart Grid
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Gain insight into issues surrounding
the current grid• Understand major issues driving
the Smart Grid and how it might affect an individual organization
• Know possible roadblocks of the Smart Grid
• Become knowledgeable about Smart Grid solutions
objectives• Gain insight on the current status
of the Smart Grid: what it is and what it is not, its components, its challenges, and the opportunities it presents for our future
course Topics • Historical context of today’s grid• Today’s struggling grid• What is the Smart Grid?• Benefi ts of the Smart Grid• Components of the envisioned
Smart Grid• Putting the components
of the Smart Grid together• Issues driving the progress
of the Smart Grid• Roadblocks to the Smart Grid• Delivery of major Smart Grid
components• The current grid capacity
and the future Smart Grid• Alstom Grid’s Smart Grid
solutions
Introduction to smart GridGEE008
NEw
64 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management 2 days
GEE009 100% theoretical
Some background reading is provided prior to classroom training
• Employees who need a simple understanding of how the modern energy control center (ECC) operates, and how Alstom Grid e-terra solutions assist ECC operations
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will increase their
understanding of what the ‘grid’ is, and how our customers manage its reliability
• Participants will increase their understanding of how Alstom Grid e-terra solutions help our customers
objectives• List some regulation, technology,
cultural, and business changes that affect Alstom Grid customers
• Identify the equipment of a typical power system (generation, transmission, distribution assets)
• Describe the layout and function of a typical energy control center (GCC, TCC, DCC, ECC)
• Describe the purpose of some e-terrasolutions (e-terrascada, e-terrageneration, e-terrahabitat, e-terraplatform…)
• Design and describe a simple conceptual architecture of a system delivered by Alstom Grid to customers (PDS, QAS, DTS, EMS, DMS, GMS)
course Topics • Industry changes• e-terra toolbox• Electric utility control center today• Production real-time data fl ow• Production change deployment• Change response• Electric utility control center tomorrow
control center ArchitectureGEE009
NEw
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Globa l Tra in ing Offer I 65
2 days
GEE010 50% practical50% theoretical
None; it is helpful if the student has a background in the system which he or she is supporting or a background in computer support
• Support team — EMS, DMS, or MMS — who are involved in working on your system and who, from time to time, need to resolve issues with the system, including the fi ling of SPRs
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Attendees will gain the confi dence
to be able to apply the principles of the troubleshooting course to the resolution of problems
• Development of a common troubleshooting language with the Alstom Grid support team
• Reduction in the time it takes to resolve problems
objectives• Gain the tools for accurate resolution
of the root cause of a problem • Reduce the time required to resolve
issues• Reduce the level of stress of support
staff• Establish a common vocabulary
between your support staff and the Alstom Grid support team for resolution of issues
• Teach a standardized process of troubleshooting and put this process into practice
course Topics • Troubleshooting as a life skill• Standardized troubleshooting process• Building confi dence in using tools
to fi nd resolution to issues• Practical use of the methodology
in problem resolution
TroubleshootingGEE010
NEw
66 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 1 day
TEL013 100% theoretical
The participants need to have a background in the electrical energy environment
• Personnel in charge of the operation or the maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
managers will not only have attained a comprehensive view of telecom architectures in power networks but they also will have acquired the knowledge to differentiate the services that may be required and that can be supported within his/her organization
objectives• Give an exhaustive view of the different
methods for exploiting historical data
course Topics • Presentation of operator’s needs• Constraints• Telecom Solutions• Telecom Network management• Telecom Actual and future Services• Telecom Network principles and
examples
Telecommunications in a power NetworkTEL013
Globa l Tra in ing Offer I 67
Additional programs − Available on demand
technical fundamentals
a2402 High Voltage installations diagrams and components
a5412 Surge Arresters
netWOrk management
gee005 SCADA Security
The following training programs are available on demand. Please don’t hesitate to contact us.
WeB
transmission equipment 71 • e-Learning fundamentals for high Voltage above 50 kV s320172 • e-Learning fundamentals for GIs (Gas-Insulated switchgear) substation s320273 • Transformer technology, features and applications s360174 • sF6 Gas Recovery Regulation Ec 842-2006 (for inexperienced personnel) V003275 • sF6 Gas Recovery Regulation Ec 842-2006 (for experienced personnel) V003376 • handling of sF6 and cF4 gases according to IEc/TR 62271-303 technical report M11177 • power Transformers operation & maintenance c424278 • on Load Tap changers operation & maintenance c453279 • Vertical-break, center-break and pantograph −
Disconnectors and Earthing switches from 52 kV to 550 kV M151/TIR05880 • sF6 circuit breaker − GL Type for high Voltages under 250 kV
operation & maintenance V5642/M105/TIR04981 • sF6 circuit breaker − GL Type for high Voltages over 250 kV
operation & maintenance V5442/M106/TIR05582 • Deadtank circuit breaker – DT1/DT2 Ranges M10183 • monitoring cBwatch-2 operation V8142/M14184 • synchronizing relay Rph range V8342/M14285 • FKG2 − sF6 generator circuit breaker − operation & maintenance V944286 • FKG1 − sF6 generator circuit breaker − operation & maintenance V954287 • Gas-Insulated switchgear − F35-3/4/5 Type − maintenance & Breakdown repair TIOE00288 • Gas-Insulated switchgear − B65 Type − maintenance & Breakdown repair TIOE00389 • Gas-Insulated switchgear − B95/B212 Type − maintenance & Breakdown repair TIOE00490 • Gas-Insulated switchgear − B105 Type − maintenance & Breakdown repair X444291 • Gas-Insulated switchgear − T155 Type spring mechanism
maintenance & Breakdown repair X614292 • Bwatch-3 – status monitoring system for Gas-Insulated switchgear X8142/M14393 • cAIs/AIm/hypact compact outdoor substation solution/72, 5 kV up to 170 kV
commissioning, operation & maintenance TIR05994 • ms 3000/ms 2000 in practice − Installation, operation & maintenance TIR06695 • spring operating mechanism for circuit breaker Type FK1/2/3 service,
maintenance & Troubleshooting TIOE00696 • high Voltage Test with pD/UhF measurement on Gas-Insulated switchgear TIOE008
97 • Additional programs
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
Whether maintenance is carried out by your company’s site personnel or subcontracted, power service continuity is your remit. Your electrical installation may already be designed but in-depth product knowledge is vital. When it comes to equipment operation and maintenance, theoretical study is necessary but not sufficient to optimize site personnel reactivity. What makes a real difference is the experience site personnel can gain through practice, over the years, or... through training.
operation & Maintenance
70 I Globa l Tra in ing Offer
Theory is needed, practice is essential!It is clear that no operation or maintenance can be achieved without a minimum of electrical product study. A theoretical approach will allow your personnel to acquire the right competencies more quickly. Training will provide in weeks what field experience can bring you in years.
This is why the Alstom Grid Technical Institute provides the right blend of theory and practice in its training courses:• The theoretical part of our training courses enables the trainee to make an in-depth study of product components and assembly parts. This is the only way to understand how they work, what electrical and mechanical constraints may be encountered in the equipment’s lifespan and why it is important to take care of the product.
• The practical part of our training includes hands-on work on real-size equipment.
This ensures that the exact, and correct, operation is carried out in full by the trainee. This is the best way to enhance personnel’s hand memory.
After a reminder on electrical risk prevention, and safe equipment conditions inspection, Alstom Grid Technical Institute training courses in Operation & Maintenance are available for transmission equip-ment, and cover:• Operation issues such as safe operating conditions, correct interloc-king, equipment monitoring, fault simulations, fault diagnosis, and troubleshooting.
• Maintenance issues such as maintenance plan (e.g., scheduled/condition maintenance), maintenance procedures (e.g., regular/repair operations) and testing procedures before return to normal operation.
Maintenance trainings are performed according to the several levels prescribed by Electrical Standards and the manufacturer.
your equipment at the heart of our training process!Thanks to the modular design of our training courses, each course can be fully adapted to your own specific electrical equipment.Alstom Grid Technical Institute’s expert trainers can study, in full confi-dentiality, your product’s specification, technical data and maintenance procedures to create and deliver customized teaching material that will optimize the competence of your personnel.Whatever type of training is chosen, either standard or customized programs, the teaching material is based on manufacturer’s records, providing a guarantee of content for current products as well as legacy ones.
matching your needs
Globa l Tra in ing Offer I 71
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step
NEw
5 hours
All High Voltage trainingsp. 72 to p. 97
s3201 100% theoretical
T&D experience
• People wishing to enhance their transmission working knowledge and to improve their technical understanding of grid products and solutions
design
OperatiOn
management
Customer Benefi ts
Anytime, anywhere, as long as you have internet access
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced tutor• Accessible training 24/7 • Time saving, courses done at the
trainee’s own pace• Technical guarantee of contents designed
by experts• To be used before and after classroom
session
objectives• Prepare to the classroom session• Master the role and the general
organization of a HV substation• Understand the role and the structure
of HV Circuit breakers• Know the substation structure
(layout and arrangement)• Understand functions and structure
of HV lines
course Topics • Module 1: HV substations• Module 2: HV Circuit breakers
(air insulated)• Module 3: Architecture of HV
substations• Module 4: Step-up substation • Module 5: Functions and structure
of HV lines
• Available assessments• Easy user navigation• Various interactive learning activities • Online dictionary on Transmission
e-Learning fundamentals for high Voltage above 50 kVs3201
72 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
NEw
5 hours
s3200 All GISHigh Voltage trainingsp. 87 to p. 97
s3202 100% theoretical
T&D experience
• All people interested in GIS substation fundamentalsdesign
OperatiOn
management
Anytime, anywhere, as long as you have internet access
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced tutor• Accessible training 24/7• Time saving, courses done at the
trainee’s own pace• Designed by experts• To be used before and after classroom
session
objectives• Prepare the classroom session• Know the architecture and function
of a Gas-Insulated Switchgear substation or GIS
• Understand the interconnection between GIS substations and electrical networks according to their layout
• Discover the different instrument transformers used on the HV networks
course Topics • Module 1: HV substation• Module 2: GIS substation• Module 3: Structure and architecture
of a HV substation• Module 4: Interconnection and
transformer substation• Module 5: Instrument transformers
• Available assessments• Easy user navigation• Various interactive learning activities • Online dictionary on Transmission
e-Learning fundamentals for GIs (Gas-Insulated switchgear) substation
s3202
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 73
Contact us
price
5 hours
s3200s3300A4213c4242c4532
s3601 100% theoretical
T&D experience
• People wishing to enhance their T&D working knowledge and especially to improve their technical understanding of transformers
design
OperatiOn
management
Anytime, anywhere, as long as you have internet access
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced tutor• Accessible training 24/7 • Time saving, courses done
at the trainee’s own pace• Designed by experts• To be used before and after classroom
session
objectives• Understand the various transformer
technologies related to substations• Know how transformers step-up or
step-down voltages, adjust network voltages
• Know the differences between transformer types
course Topics module 1: hV substations • Arrangement with transformersmodule 2: power transformers• Principles• Technologies• Tap-changers module 3: Role of Transformers within a power plant• Main transformers• Auxiliary transformersmodule 4: Instrument transformers• Current transformers• Voltage transformersmodule 5: Distribution transformers• Oil-immersed type• Dry types• Cooling systems
• Available assessments• Easy user navigation• Various interactive learning activities • Online dictionary on Transmission
Transformer technology, features and applications
NEws3601
74 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
3.5 days
All trainings related to SF6
p. 80 to p. 93
V0032 30% practical50% theoretical20% assessment
Basic or no practical knowledge of SF6 handling, especially in the recovery and use of suitable PPE
• Personnel who recover SF6 gas
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Each trainee will work on real equipment• Certifi cation EC 842-2006• Course limited to 8 trainees for the
training to be most effective and to ensure optimum safety on the shopfl oor
objectives• Know the general characteristics
of SF6 gas• Control its environmental impact,
emissions and the greenhouse effect• Use the SF6 gas in total safety• Carry out the best practices related
to the use of SF6 according to the equipment involved
• Understand the functions of equipment used for the recovery, control and measurement of SF6 gas
course Topics Theoretical part• Environment and SF6 – Regulation
EC842-2006• Sulphur hexafl uoride• Electric components and SF6• Various qualities of SF6• SF6 design of electrical equipment
• Storage and transportation of SF6 – Legal constraints
• Products of decomposition and neutralization
• Monitoring of gas and the environment Practical part• Preparation of practical session on SF6
recovery• Practical work on SF6 recovery and use
of suitable PPE in a contaminated environment
Assessment and certifi cation• Theoretical assessment – Individual
multiple choice questionnaire• Practical work on SF6 recovery
(individual exam)• Control and measurement of gas
to be recovered• Practice of SF6 recovery using
a recovery device• Practice of SF6 recovery and
decomposition products
Note: A version of this course applied to the Non-European Regulation CEI/TR 62271-303 is also available. Please refer to course M111, page 76.
sF6 Gas Recovery RegulationEc 842-2006 (for inexperienced personnel)
V0032NEw
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 75
Contact us
price
2 days
All trainings related to SF6
p. 80 to p. 93
V0033 20% practical50% theoretical30% assessment
Signifi cant practical knowledge of SF6 handling, especially in the recovery and use of suitable PPE
• Personnel who recoverSF6 gas
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Each trainee will work on real equipment• Certifi cation EC 842-2006• Course limited to 8 trainees for the
training to be most effective and to ensure optimum safety on the shopfl oor
objectives• Know the general characteristics
of SF6 gas• Control its environmental impact,
emissions and the greenhouse effect• Use SF6 gas in total safety• Carry out the best practices related
to the use of SF6 according to the equipment involved
• Understand the functions of equipment used for the recovery, control and measurement of SF6 gas
course Topics Theoretical part• Environment and SF6 – Regulation
EC842-2006• Sulphur hexafl uoride• Electric components and SF6• Various qualities of SF6• SF6 design of electrical equipment
• Storage and transportation of SF6 – Legal constraints
• Products of decomposition and neutralization
• Monitoring of gas and the environment Practical part• Preparation of practical session on SF6
recovery• Practical work on SF6 recovery and use
of suitable PPE in a contaminated environment
Assessment and certifi cation• Theoretical assessment – Individual
multiple choice questionnaire• Practical work on SF6 recovery
(individual exam)• Control and measurement of gas
to be recovered• Practice of SF6 recovery using
a recovery device• Practice of SF6 recovery and
decomposition products
Note: A version of this course applied to the Non-European Regulation IEC/TR 62271-303 is also available. Please refer to course M111, page 76.
sF6 Gas Recovery RegulationEc 842-2006 (for experienced personnel)
V0033
76 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Contact us
price
NEw
module a: 1 daymodule B: 1 daymodule c: 1 dayAll High Voltage
trainingsp. 71 to p. 97
M111 30% practical50% theoretical20% evaluation
People working in the surroundings of, or having to handle SF6 and CF4 gases
• From inexperienced to experienced in gas handling, according to the desired target level A, B or C
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Related to IEC/TR 62271-303• Real hands-on work on electrical
equipment• Maximum of 6 participants per session
to be most effective and to ensure safety
objectives• Understand the general characteristics
of SF6 & CF4 gases • Master neir impact on our environment• Learn how to recover, drain the SF6
to vacuum, their refi ll a compartment under SF6 gas
• Apply the specifi c safety rules during the gas recovery operations
course Topics Theoretical part (modules A, B and c)• Environment and SF6 − CF4 gases• Sulphur Hexafl uoride SF6 and Carbon
Tetrafl uoride CF4• Electrical equipment and fl uorinated
gases• Gas qualities• Design of electrical equipment
• Storage and transport of SF6 and CF4 gases − Legal constraints
• By-products and neutralization• Gas monitoring and the environment practical part (modules B and c)• Prerequisite: module A• Preparation steps before working
to recover SF6 and CF4 gases• Hands-on utilisation of the adequate
personal protective equipment • Recovery of contaminated gases• Opening of a breaking chamber
(module C) Test and certifi cation (optional)• Theoretical part − Questionnaire• Practical part – Individual evaluation
on gas-handling according to the level of the IEC/TR 62271-303 (A, B or C) requested
Note: A version of this course applied to the European Regulation EC 842-2006 is also available. Please refer to course V0032, page 74 or V0033, page 75.
handling of sF6 and cF4 gases according to IEc/TR 62271-303 technical report
M111
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 77
Contact us
price
NEw
5 to 15 days
c4233c4532
s3601 Basic knowledge in electricity and mechanicsElectrical qualifi cation
c4242 60% practical40% theoretical
• EMS maintenance engineers
• Operation & Maintenance team
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants should gain an
increased level of knowledge in the design, O&M of transformers
• A broad technical understanding of what power transformers are today
• One year of access to S3601, e-Learning training programs accessible 24/7 through our LMS (if required)
objectives• Understand power transformer
technology • Ensure the operation of transformers• Ensure the appropriate test & evaluation
of the results• Ensure the appropriate Maintenance
course Topics Theory, construction and operation • Theory and operation• Electric & magnetic fi eld theory,
Applications • Overvoltages and overcurrents
withstands• ConstructionAccessories• Tank types, conservator types
and dehydrating breathers• Cooling modes• Bushings• OLTC, OCTC• Other accessories
Indicators, protections • Indicators and relays• Main tank & OLTC pressure devices • Other protective devices (differential
protection, restricted earth, tank protection…)Manufacturing process• Transformer assembly process in factory• Laboratory TestsTransportation, Erection & commissioning • Transportation and delivery conditions• Field preparations • Controls & Tests according procedures periodical controls, Tests & maintenance• Maintenance plan and inspection• Electrical tests • Oil quality tests• DGA• Maintenance principles (removing oil
leakages, bushing, radiator…) Analysis of tests and controlsprotections & Troubleshooting • Buchholz relay• Other protective devicesTransformer failuresNote: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
c4242power Transformers operation & maintenance
78 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
4 days
c4233c4242A4213
c4532 50% practical50% theoretical
s3601 Basic knowledge in electricity and mechanicsElectrical qualifi cation
• Operating & Maintenance team
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants should gain from the
course an increased level of knowledge in the design, O&M of OLTC
• A broad technical understanding of what power transformers with OLTC are today
• Practice in operation conditions• Technical guarantee of contents• One year of access to S3601, e-Learning
training programs accessible 24/7 through our LMS (if required)
objectives• Understand the OLTC technology • Ensure the operation of transformers
with OLTC• Ensure the appropriate maintenance
according to OLTC types
course Topics Description and operation of an on Load Tap changer• The selector switch• The diverter switch• The motor drive unitpresentation and role of each mechanismpractical work & maintenance• Remove the diverter switch (insert)
from chamber
• Replacement of worn mechanical parts (springs etc.)
• Maintenance/replacement of electrical contacts
• Measuring the transition resistors• Cleaning devices• Insert the diverter switch into chamber• Filling with oil• TTR measurements• Adjusting the axis• Electrical and mechanical locking
control• Protective Relay/pressure relay and
PRV tests
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
on Load Tap changers operation & maintenance
c4532
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 79
Contact us
price
s3201 Fundamentals of electricity and mechanics
1 to 3 days
M151/TIR058 50% practical50% theoretical
• Installation personnel, foremen and supervisors, technicians and engineers who are responsible for the installation and operation of High Voltage switchgear
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Become familiar with the design
and operation of disconnectors and earthing switches, and with the associated motor and manual drives
course Topics Introduction to the productDesign and operation of disconnectors and earthing switches: • Conducting paths• Base frames• LinkagesDesign principle of the contact systemsDesign and operating principle of motor and manual driveson-site installation and commissioningsafety instructions and proceduresThe maintenance concept including inspection• Maintenance and repair criteria and
schedulingTests • Performance, analysis• Measurement result
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
Vertical-break, center-break and pantograph Disconnectors and Earthing switches from 52 kV to 550 kV
M151/TIR058NEw
80 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
2 to 3 days
V8142/M141V5642/m105/TIR049 50% practical50% theoretical
s3201 TIR048 Fundamentals of electricity and mechanics
• Technicians involved in the operation and maintenance of installations in High Voltage substations
OperatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Apply the maintenance procedures
of the GL Circuit breaker and the associated mechanism
• Carry out corrective maintenance in case of minor failure
• Apply the safety rules
course Topicssulphur hexafl uoride sF6• Precautions and security, manipulation
and recoveryBreaking electrical phenomenaDevelopment of sF6 circuit breakers or with mixed gas• Display steps of extinguishing
in SF6 or SF6 − CF4• Arc extinguishingpresentation of the sF6 circuit breakers GL• Range GL, pole architecture, operating
sequences of interrupting chambermechanical control mechanism FK• General remarks, security provision
• Operating principle (kinematics, energy transfer)
• Breakdown repair methodology, interchangeability
maintenance and tooling for sF6 circuit breakers GL• Maintenance plan, dedicated tooling
for maintenance• Wear measurements of contacts• Mechanical control mechanism LV diagrams• LV diagrams: special functions, possible
optionssF6 monitoring• SF6 monitoring device, SF6 pressure
variation curvesIn situ study of circuit breaker• Technology of the poles on drawings,
display of the sub-assemblies• Study of control mechanisms and interrupting
chamber (life-sized teaching tools)practical work on circuit breakers and associated control mechanisms
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
sF6 circuit breaker – GL Type for high Voltages under 250 kV – operation & maintenance
V5642/M105/TIR049
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 81
Contact us
price
2 to 3.5 days
V8142/m141V8342/m142V8343
V5442/m106/TIR055 50% practical50% theoretical
s3201 Fundamentals of electricity and mechanics
• Technicians involved in the operation and maintenance of installations in High Voltage substations
OperatiOn
maintenance
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Apply the maintenance procedures
of the GL Circuit breaker and the associated mechanism
• Carry out corrective maintenance in case of minor failure
• Apply the safety rules
course Topics sulphur hexafl uoride sF6• Precautions and security, manipulation
and recoveryBreaking electrical phenomenaDevelopment of sF6 circuit breakers or with mixed gas• Display steps of extinguishing in SF6
or SF6 − CF4• Arc extinguishingpresentation of the sF6 circuit breakers GL• Range GL, pole architecture, operating
sequences of interrupting chambermechanical control mechanism FK3• General remarks, security provision
• Operating principle (kinematics, energy transfer)
• Breakdown repair methodology, interchangeability
maintenance and tooling for sF6 circuit breakers GL314• Maintenance plan, dedicated tooling
for maintenance• Wear measurements of contacts• Mechanical control mechanism LV diagrams• LV diagrams: special functions, possible
optionssF6 monitoring• SF6 monitoring device, SF6 pressure
variation curvesIn situ study of circuit breaker• Technology of the poles on drawings,
display of the sub-assemblies• Study of control mechanisms and interrupting
chamber (life-sized teaching tools)practical work on circuit breakers and associated control mechanisms
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
sF6 circuit breaker − GL Type for high Voltages over 250 kV − operation & maintenance
V5442/M106/TIR055sF6 circuit breaker – GL Type for high Voltages under 250 kV – operation & maintenance
82 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
2 days
V8142/m141M101 30% practical70% theoretical
s3201 Fundamentals of electricity and mechanics
• Operators and maintenance technicians, engineers and team managers
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• You obtain a return on investment with
better equipment availability• You signifi cantly improve the way your
equipment functions
objectives• Know how the “Deadtank” DT1/DT2
type Circuit breaker and its related spring control function
• Know the maintenance procedures relating to the DT Circuit breaker and its related control
• Intervene in basic maintenance in complete safety
course Topics General characteristics• Circuit breaker standards and rangesFeatures and design• Compartments• Confi gurationsInstallation and connection to the substation• Gas handling: SF6, gas mixture,
densimeter test• Commissioning and tests• OperationMaintenance procedures
Deadtank circuit breakerDT1/DT2 Ranges
M101
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 83
Contact us
price
1.5 to 2 days
M101 V5442/m106/TIR055
V8142/M141 50% practical50% theoretical
s3201 Basic knowledge in computers, good knowledge in Circuit breaker behavior and knowledge in Circuit breakers in O&M circuit
• Technicians involved in the operation and maintenance on Circuit breakers
OperatiOn
maintenance
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• To master and optimize the use of your
equipment• To evolve toward operating conditions
by digital control systems• Practice in operational conditions• Predictive maintenance of equipment
objectives• Understand the CBWatch-2 functions• Set parameters of each function• Analyze and understand information• Master the MMI (Man-Machine
Interface)
course Topics Introduction to monitoring cBwatch-2 monitoring device• Confi guration• Available functionsmeasurement system• Sensors, operating time and
mechanism supervision• Electrical wearsoftware and mmIcBwatch-2 data usepractical work on cBwatch-2 associated with its circuit breaker
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
monitoring cBwatch-2 operationV8142/M141
84 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
2.5 days
V5442/M106/TIR055
V8342/M14250% practical50% theoretical
s3201 Experience in High Voltage switchgearGood knowledge in electrical phenomenaElectrical graduate
• Technicians in substation operation or control and protection team
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• To master and optimize the use of your
equipment• To evolve toward operating conditions
by digital control systems• Practice in operational conditions• Predictive maintenance of your
equipment
Customer Benefi ts
Contact us
Dates & Place
objectives• Understand the RPH relay functions• Make adjustments via MMI• Analyze data given by the RPH relay
course Topics Introduction to synchronization Electrical phenomena related to circuit breaker operation • Opening• ClosingRph synchronization relay• Presentation• Confi guration• Parameters• Alarmssynchronizing operation• Commissioning• Analysis of resultspractical works on Rph associated with its circuit breaker
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
synchronizing relay Rph rangeV8342/M142
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 85
Contact us
price
3 days
V8142/m141V9442 50% practical50% theoretical
s3201 Fundamentals of electricity and mechanics
OperatiOn
maintenance• Technicians involved in the
operation and maintenance on generator Circuit breakers up to 200 MW per unit
Customer Benefi ts
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Understand the operation of combined
generator Circuit breakers contextually• Apply the maintenance procedures of the
combined FKG2, SKG, MKG, IKG and the associated mechanisms
• Carry out corrective maintenance in case of minor failure
• Apply the safety rules during the maintenance
course Topics sulphur hexafl uoride sF6• Precautions and security, handling
and recoveryBreaking electrical phenomenaDevelopment of sF6 generator circuit breakers• Display steps of extinguishing in SF6• Arc extinguishingpresentation of the sF6 circuit breakers FKG2
• Range FKG, pole architecture, operating sequences of interrupting chamber
mechanical control mechanism FK3-4• General remarks, security provision• Operating principle (kinematics, energy
transfer)• Breakdown repair methodology,
interchange abilitymaintenance and tooling for sF6 circuit breakers FKG2• Maintenance plan, dedicated tooling
for maintenance• Wear measurement of contactsmechanical control mechanism LV diagrams• LV diagrams: special functions, possible
optionssF6 monitoring• SF6 monitoring device, density switch,• SF6 pressure variation curves fi lling
valvepractical work on circuit breakers with associated control mechanisms
FKG2 − sF6 generator circuit breaker − operation & maintenance
V9442synchronizing relay Rph range
86 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
4 days
V8142/m141V9542 50% practical50% theoretical
s3201 Fundamentals of electricity, mechanics and hydraulics
• Technicians involved in the operation and maintenance on generator Circuit breakers up to 1 000 MW per unit
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Understand the operation of generator
Circuit breakers contextually• Apply the maintenance procedures of
the combined FKG1, SKG, MKG, IKG and the associated mechanisms
• Carry out corrective maintenance in case minor failure
• Apply the safety rules during the maintenance
course Topics sulphur hexafl uoride sF6• Precautions and security, manipulation
and recovery Breaking electrical phenomena Development of sF6 generator circuit breakers• Display steps of extinguishing in SF6• Arc extinguishing
presentation of the sF6 circuit breakers FKG1• Range FKG, pole architecture, operating
sequences of interrupting chamber• Associated SKG, MKG, IKG combinationFK3.12 spring mechanism• Operations• Breakdown repair methodologymaintenance and tooling for sF6 circuit breakers FKG1• Maintenance plan, dedicated tooling for
maintenance• Wear measurement of contactsmechanical control mechanism LV diagrams• LV diagrams: special functions, possible
optionssF6 monitoring• SF6 monitoring device, density switch,
SF6 pressure variation curves, fi lling valve
practical work on circuit breakers and control mechanisms
FKG1 – sF6 generator circuit breaker − operation & maintenance
V9542NEw
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 87
Contact us
price
3 days
X8142/m143TIOE002 50% practical50% theoretical
s3202 Basic knowledgein electricity and mechanicsNormal experience in HV switchgear
• Maintenance teammaintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
Customer Benefi ts
Contact us
Dates & Place
objectives• Know the GIS F type, the maintenance
philosophy and corresponding procedures
• Gain practical experience on different maintenance operations
course Topics • Sulphur hexafl uoride SF6• Concept of a substation in a metal
enclosure F type• Electrical phenomena related to
breaking• Switchgear technology F type• Gas module service F type• Compartments preparation and SF6
fi lling for apparatus F type• FK, FKF spring mechanism• FKF 3 spring mechanism• High Voltage tests for apparatus F type• SF6 practical works F type• Apparatus maintenance F type• Operating mechanism maintenance
for apparatus F type• Manufacturer maintenance schedule
for apparatus F type• Works repair for apparatus F type
Gas-Insulated switchgear − F35-3/4/5 Type maintenance & Breakdown repair
TIOE002
88 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
5 days
X8142/m143TIOE003 50% practical50% theoretical
s3202 Basic knowledge in electricity and mechanicsNormal experiencein HV switchgear
• Maintenance teammaintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Know the GIS B type, the maintenance
philosophy and corresponding procedures
• Gain practical experience on different maintenance operations
course Topics • Sulphur hexafl uoride SF6• Concept of a substation in a metal
enclosure B65 type• Electrical phenomena related
to breaking• Apparatus technology B65 type• Gas module service B65 type• Compartments preparation and SF6
fi lling for apparatus B65 type• FK, FKF spring mechanism• FKF 3 spring mechanism• High Voltage tests for apparatus B type• Manufacturer maintenance schedule
for apparatus B type• Bay design B type• SF6 practical works B type• Apparatus maintenance B type• Operating mechanism maintenance
for apparatus B type• Works repair for apparatus B type
Gas-Insulated switchgear − B65 Type maintenance & Breakdown repair
TIOE003
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 89
Contact us
price
5 days
X8142/m143TIOE004 50% practical50% theoretical
s3202 Basic knowledge in electricity and mechanics Normal experience in HV switchgear
• Maintenance teammaintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, students
will be able to fully use the database and display building tolls to make maintenance faster and more effi cient
objectives• Know the GIS B type, the maintenance
philosophy and corresponding procedures
• Gain practical experience on different maintenance operations
course Topics • Sulphur hexafl uoride SF6 • Concept of a substation in a metal
enclosure B95/B212• Electrical phenomena related
to breaking • Apparatus technology B95/B212 Type • Gas module service B95/B212 Type• Compartments preparation and SF6
fi lling for apparatus B95/B212 Type • FK, FKF spring mechanism • FKF 1.2 – 2.6 spring mechanism • High Voltage tests for apparatus B type • Manufacturer maintenance schedule
for apparatus B type • Bay design B type • SF6 practical works B type • Apparatus maintenance B type • Operating mechanism maintenance
for apparatus B type • Works repair for apparatus B type
Gas-Insulated switchgear − B95/B212 Type maintenance & Breakdown repair
TIOE004
90 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
4 to 5 days
X8142/m143X4442 50% practical50% theoretical
s3202 Basic knowledge in electricity and mechanicsNormal experience in HV switchgear
• Maintenance teammaintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Know the GIS B type, the maintenance
philosophy and corresponding procedures
• Gain practical experience on different maintenance operations
course Topics Theory• Sulphur hexafl uoride SF6• Concept of a substation in a metal
enclosure B105 type• Electrical phenomena related
to breaking• Apparatus technology B105 type
• Bay layout B type• Gas module service B105 type• Compartment preparation and SF6
fi lling for apparatus B105 typespring mechanism• FK 3 spring mechanismMaintenance• Maintenance schedule for apparatus B
type• Apparatus maintenance B type• In situ study of a bay B type• Operating mechanism maintenance
for apparatus B typepractical works• Works repair for apparatus B type• SF6 practical works B type
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
Gas-Insulated switchgear − B105 Type maintenance & Breakdown repair
X4442
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 91
Contact us
price
4 to 5 days
X8142/m143X6142 50% practical50% theoretical
s3202 Basic knowledge in electricity and mechanicsNormal experience in HV switchgear
• Maintenance teammaintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation condition• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Know the GIS T type, the maintenance
philosophy and corresponding procedures
• Gain practical experience on different maintenance operations
course Topics Theory• Sulphur hexafl uoride SF6• Concept of a substation in a metal
enclosure T155 type• Electrical phenomena related to breaking• Apparatus technology T155 type• Bay layout T type• Gas module service T type
• Compartment preparation and SF6 fi lling for apparatus T155 type
spring mechanism• FK3 spring mechanismMaintenance• Apparatus maintenance• Maintenance schedule for apparatus
T type• In situ study of a bay T type• Operating mechanism maintenance
for apparatus T typepractical work• Works repair for apparatus T type• SF6 practical works T type
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
Gas-Insulated switchgear − T155 Type spring mechanism − maintenance & Breakdown repair
X6142
92 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
2 days
All GIS trainingsp. 87 to p. 91X8142/M143
50% practical50% theoretical
s3202 Basic knowledge in electricity and mechanicsExperience in GIS operationsExperience in PC and windows operating system in particular
• Engineers and senior technicians involved in the operation and maintenance of installations above 50 kV
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
Contact us
Customer Benefi ts
Dates & Place
objectives• Interpret the subassemblies of GIS• Use maintenance specifi c tools
(PDA and PC)• Analyze and interpret the BWatch-3
output data
course Topics Introduction• History of status monitoring• BWatch-3 solutionThe Bwatch-3• General presentation• Study of the BWatch-3 internal
architecture• Density sensors details
Monitoring functions• SF6 gas• Internal arc localizationAcquisitions systems• Detail of each substationman-machine Interface (mmI)• Local display• Test pad PPC• Central MMIpractical work• On a simulator
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
Bwatch-3 – status monitoring system for Gas-Insulated switchgear
X8142/M143
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 93
Contact us
price
3 days
TIR059 50% practical50% theoretical
s3201 Fundamentals of electricity and mechanics
• Installation personnel, foremen and supervisors, technicians, and engineers who are responsible for the maintenance of High Voltage switchgear
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents
objectives• Familiarize yourself with the design and
operation of the substation and with all associated station components and equipment
• Learn environmentally compatible methods for handling SF6 gas
• Get in-depth knowledge of the devices that have been specifi cally confi gured for your application; procedures for Commissioning, testing and operation will be covered
course Topics • Introduction to the product line and tour
of the production facilities• The design and operation of SF6 – Circuit
breakers, operating mechanism system and contact systems and the principle of current interruption will be discussed
• Design and operation of disconnectors and earthing switches, conducting paths, base frames and linkages
• The construction and design principles of all other individual station components will be explained, as well as environmentally compatible methods for handling
• SF6 gas its physical and chemical properties and the SF6 gas monitoring
• Safety instructions and procedures• Installation and commissioning,
safety instructions and procedures, testing and measuring equipment and maintenance concept.
Note: Practical work may differ, depending on the materials available on site and the time available for the chosen training. Please don’t hesitate to contact us for more details.
cAIs/AIm/hypact compact – outdoor substation solution/72,5 kV up to 170 kVcommissioning, operation & maintenance
TIR059Bwatch-3 – status monitoring system for Gas-Insulated switchgear
94 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
2 days
TIR066 50% practical50% theoretical
s3601A4213 Knowledge of transformers and basic knowledge of information technology
• Engineers and technicians involved in the operation, installation and maintenance of monitoring systems, and transformer experts
design
installatiOn
OperatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Improvement in the performance
of the transformer, respectively related to components on in use
• Evaluation of the operation and condition of the transformer, respectively related to components in use
• Condition based maintenance of transformers
• Practice of monitoring system• Initiation of actions, based on condition
assessment
objectives• Learn how to install, confi gure and
maintain the MS 3000/MS 2000 Monitoring system
• Gain deeper knowledge of how to interpret and analyze the provided information
course Topics Fundamentals• Introduction into MS 3000/MS 2000
monitoring system and its objectivesInstallation• Installation of MS 3000/MS 2000
sensors• Installation of MS 3000/MS 2000
system and communicationconfi guration• Software confi guration with alarm
and warning settings• Confi guration of communicationsAnalysis• Analysis of operation condition
of transformer and its equipment • Use for condition based maintenanceservice• Troubleshooting• Maintenance
ms 3000/ms 2000 in practiceInstallation, operation & maintenance
TIR066
NEw
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 95
Contact us
price
3 days
All HV trainingsp. 80 to p. 93TIOE006
50% practical50% theoretical
Basic knowledge in electricity and mechanicsNormal experience in HV switchgear
• Operation & Maintenance teamOperatiOn
maintenance
management
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents• Maximum of 4 participants per session
to be most effective and to ensure safety
objectives• Know the spring operating
mechanism, the maintenance philosophy and corresponding procedures
• Gain practical experience on different maintenance operations
course Topics • Introduction to the Spring Mechanism
product family• Operation of spring operating
mechanism• Design of spring operating mechanism• Manufacturing characteristics
components of spring operating mechanism• ON/OFF key-switch• Gear box• Position indicator• Auxiliary switch Practice• Advice and exercises covering
installation, operation, commissioning and troubleshooting
• Safety instructions and procedures• Performance of tests• Analysis of the test and measurement
results
spring operating mechanism for circuit breaker Type FK1/2/3 service, maintenance & Troubleshooting
TIOE006NEw
96 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Contact us
price
5 days
TIOE008 40% practical60% theoretical
Practical knowledge in installation, commissioning and operation of HV switchgear
• Engineering background, Sound knowledge in electricity
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Practice in operation conditions• Immediate practice of the theoretical
knowledge acquired• Technical guarantee of contents• Maximum of 5 participants per session
to be most effective and to ensure safety
Customer Benefi ts
Contact us
Dates & Place
objectives• Know the HV Testing of GIS:
Procedure & Standards• Know the safety instructions and
procedures • Be able to choose the correct test
equipment• Know the interfaces between HV Test
Equipment and GIS • Get practice on UHF/PD
Measurements
course Topics • Standards• PD measurement techniques• UHF detection method
• Voltage withstand test• General procedure & Safety instructions • Test at industrial frequency• Determination of Test Voltages• Overview of the available HV test
equipment, its function and installation• Switching and Voltage Injection as per
procedurePractical exercise• Generation/Stimulation of different
fault conditions inside a GIS• Localization of partial discharge• Study the different PD Patterns • Documentation and record of values• Analysis of the test and measurement
results
high Voltage test with pD/UhF measurement on Gas-Insulated switchgear
NEwTIOE008
Globa l Tra in ing Offer I 97
Additional programs − Available on demand
transmissiOn equipment
c4233 Immersed transformers: fl uid sampling for laboratory analysis
tir048 SF6 − Circuit breakers Type S1… F1/F3 (synchronous) 72,5 kV up to 170 kV − Commissioning & Maintenance
V9342 FKG1 − SF6 generator Circuit breaker − Operation & Maintenance
tiOe001 Gas-Insulated Switchgear − F35-2 Type − Maintenance & Breakdown repair
tiOe005 Gas-Insulated Switchgear − B112 Type − Maintenance & Breakdown repair
X2042 Gas-Insulated Switchgear − T Type − Maintenance & Breakdown repair
V3442 FX12 − FX14 − FX22 − FX32 − FX42 − High Voltage − SF6 Circuit breaker − Operation & Maintenance
V4342 FXT14 − FXT245 − High Voltage − SF6 Circuit breaker − Operation & Maintenance
V4442 FXT15 − FXT16 − FXT17 − High Voltage SF6 Circuit breaker − Operation & Maintenance
tir050 SF6 Circuit breakers Type S1… F1/F3 - 52 kV bis 245 kV − Commissioning & Maintenance
tir051 SF6 Circuit breakers Type S1… F1/F3 - 52 kV bis 245 kV − Operation & Maintenance
tir052 SF6 Circuit breakers Type S1… F1/F3 (synchronous)/72,5 kV bis 170 kV − Operation & Maintenance
tir053 SF6 Circuit breakers Type S1… F1/F3 − (intelligent/synchronous ) 72,5 kV bis 170 kV − Operation & Maintenance
tir060 SF6 Circuit breakers Type S1… S2 with pneumatic or hydraulic mechanism/123 kV up to 420 kV − Operation & Maintenance
tir007 SF6 gas in switching equipment and substation
V9242 PKG Air Blast generator Circuit breaker − Operation & Maintenance
m102 Deadtank Circuit breakers ≥ 123 kV HGF1012/1014 Series
m104 SF6 Circuit breakers − GL 200 − Maintenance & Repair
m107 SF6 Circuit breakers − GFX family ≥ 123 kV − Maintenance & Repair
tir061 Gas-Insulated Switchgear − Series B1 up to B4 / 72.5 kV up to 420 kV − Operation & Maintenance
The following training programs are available on demand. Please don’t hesitate to contact us.
WeB
protection – system training 101 • protection of industrial installations D2102102 • Legacy product Training: Electromechanical, miDos, K-series, L-series,Tropic, opN PROP001103 • micom px20 & px40 master class PROP002104 • micom px20 px30 and px40 master class PROP003105 • micom px30 master class PROP004106 • micom p440, p630 & p540 Relaying PROP005107 • overcurrent and Feeder protection micom p12x and p14x PROP120108 • motor protection − micom p22x and p24x PROP121109 • Generator protection − micom p34x PROP122110 • Distance protection − micom p44x PROP123111 • Line Differential protection − micom p52x and p54x PROP124112 • Voltage and Frequency protection − micom p92x and p94x PROP125113 • Distance protection Device for Railway Application − micom p438 PROP132114 • Differential Transformer protection − micom p63x PROP127115 • Distance protection Device − micom p437 PROP128116 • Feeder protection Device − micom p139 PROP129117 • Digital Differential Busbar protection − micom p74x PROP130118 • Disturbance and power Quality Recorder − micom m57x/m87x PROP131119 • Railway protection PROP006
Substation Control System − Product Training
120 • Advanced Digital control system scs001121 • Basic principles of Digital control system scs002122 • Application on IEc 61850 communication protocol scs003123 • communication as per IEc 60870 and IEc 61850 scs004124 • micom s10: protection−Based substation control system scs005125 • micom c264: compact RTU (Remote Terminal Unit) scs006126 • Fundamentals of Digital control system and pAcis operation & maintenance principles scs007127 • pAcis protection Automation & control – operation scs008128 • pAcis protection Automation & control – Architecture, operation & maintenance scs009129 • pAcis protection Automation & control – Architecture, operation,
maintenance & Basic confi guration scs010130 • spAcE 2000 Digital control system scs011131 • pscN3020: Integrated protection & Distributed Digital control system scs012132 • s900 RTU and procett 5000 w operation & maintenance scs014133 • confi guration of IEc 61850 communication on micom px30 and px40 series scs020NEw
protection & sUBstation
control
The world’s highest performing networks, substations or products rely on the highest performing people. The more effi ciently they manage and understand data, the quicker the fault consequences are minimized. How do they achieve this? Some have fully automated systems, others do not. However, in both cases, always being up-to-date with the latest technological advances related to system protection and substation control is the key to improved performance.
protection & sUBstation
control
100 I Globa l Tra in ing Offer
Utilities and industries are keen to integrate a complete suite of tools for a more automated control that facilitates intelligent operation of the electrical network, from the substation to regional level.
Alstom Grid Technical Institute proposes theoretical and application trainings in protection and substations control, to have a comprehensive understanding of protection principles when setting parameters, analyzing disturbance data and managing failures. Also, the trainings allow participants to reinforce the protection schemes (for generators, industrial, distribution and transmission networks) and the digital control system for MV/HV substations. These will definitly for sure help your staff improve their reactivity when facing unexpected incidents.
A unique customized approachThanks to the modular design of our training, each course can be fully adapted to your specific configuration and to your project schedule. Customization relies on our expert trainers to analyze your technical environment, data and procedures. They adapt the teaching material and incorporate concrete examples and exercises directly transferable to your work.
matching your needs
Globa l Tra in ing Offer I 101
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 4 days
A2112 Qualifi ed technician, 2 years technological diploma or completion
D2102 40% practical and study case60% theoretical
design
installatiOn
OperatiOn
maintenance
• Engineers and technicians involved in the design, study testing, maintenance and operation of protection systems for electrical protection systems for MV installations
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Customized solutions• Handling of protection relays• Use of current injection device for tests
and simulations
objectives• Analyze the faults that may occur on
such an installation• Estimate the value of the short circuit
currents• Defi ne the main protection systems
and their settings
course Topics The distribution network• Transformer substation, short circuit
capacityIndustrial networks• Delivery substation, different
structures, different power sources• Infl uence of capacitive currents• Neutral points connections
Network Faults• Roles and qualities of protection
systemsEstimation of short circuit currents• The source is a transformer:
three-phase or two-phase short circuit
• The source is a generator set: three-phase or two-phase short- circuit
phase protection plan• Defi nition and settings of protection
systems selectivity diagramEarth protection plan• Defi nition and settings of protection
systems selectivity diagramprotection of power transformersmain protections of motorsProtection relays rangescase study
Protection of industrial installationsD2102
Contact us
Dates & Place
102 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
1 to 5 days (depending upon number of relays)PROP001
80% practical20% theoretical
Technicians and engineers from application or control departments, project managers, technicians or operatorsTechnical background required: Technician or Engineering level
• Engineers involved in the protection of railway electricity
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
the participants will have a thorough knowledge of maintaining their protection system
• Greater fault fi nding and troubleshooting ability in the protection system so plant shutdown is reduced
objectives• Understand the various relays in
the range both past and present, including GEC and ALSTOM relays
• Explain relay functionality, characteristics, settings, operation & maintenance
course Topics • Application considerations• General principles of relevant protection• Detailed functionality• Setting and interrogation using
MiCOM S1 and Courier software• Hands-on testing, injection &
commissioning proceduresOptions• Specifi c relays can be requested
Legacy product Training: Electromechanical, miDos, K-series, L-series, Tropic, opN
PROP001
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 103
Contact us
price
2 days
PROP004 PROP002 80% practical20% theoretical
Technicians and engineers from application or control departments, projects managers, technicians or operators
• All MiCOM Px20 and Px40 users
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Typically, based on customers selected
relays, the course will give a comprehensive insight into the product’s application in the fi eld, its setting and methods of remote interrogation
• The training will include in-depth training on the MiCOM relay setting software MiCOM S1
objectives• Give a comprehensive overview of
selected MiCOM Px20 and Px40 relays• Give a detailed insight into the MiCOM
support software, MiCOM S1 • Detail the relays construction,
application, programming and communication
course Topics • Settings creation and upload/download• Event extraction and interrogation• Disturbance record extraction
and interrogation• Programmable Scheme logic creation
and upload/download• Measurements monitoring• Menu Text editing
micom px20 and px40 master classPROP002
104 I Globa l Tra in ing Offer
Customer Benefi ts
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Customer Benefi ts
4 days
PROP003 80% practical20% theoretical
Technicians and engineers from application or control departments, projects managers, technicians or operators
• All MiCOM Px20, Px30 and Px40 users
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Typically, based on customers selected
relays, the course will give a comprehensive insight into the product’s application in the fi eld, its setting and methods of remote interrogation
• The training will include in-depth training on the MiCOM relay setting software MiCOM S1
objectives• Give a comprehensive overview
of selected MiCOM Px20, Px30 and Px40 relays
• Give a detailed insight into the MiCOM support software, MiCOM S1
• Detail the relays construction, application, programming and communication
course Topics • Settings creation and upload/download• Event extraction and interrogation• Disturbance record extraction
and interrogation• Programmable Scheme logic creation
and upload/download• Measurements monitoring• Menu Text editing
micom px20 px30 and px40 master classPROP003
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 105
Contact us
price
2 days
PROP002 PROP004 80% practical20% theoretical
Technicians and engineers from application or control departments, projects managers, technicians or operators
design
installatiOn
OperatiOn
maintenance
• All MiCOM Px30 users
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Typically, based on customers selected
relays, the course will give a comprehensive insight into the product’s application in the fi eld, its setting and methods of remote interrogation
• The training will include in-depth training on the MiCOM relay setting software MiCOM S1
objectives• Give a comprehensive overview
of selected MiCOM Px30 relays • Give a detailed insight into the MiCOM
support software, MiCOM S1• Detail the relays construction,
application, programming and communication
course Topics • Settings creation and upload/download• Event extraction and interrogation• Disturbance record extraction and
interrogation• Programmable Scheme logic creation
and upload/download• Measurements monitoring• Menu Text editing
micom px30 master classPROP004
106 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
PROP005 80% practical20% theoretical
Electromechanical and mathematics basis Technician or Engineer level
• Technicians and engineers from study or control departments, project managers, technicians or operators
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will be able to confi gure
and design protection schemes with the P440, P630 and P540
• Participants will master testing and commissioning aspects of these relays
objectives• Understand the product’s
functionalities and characteristics• Explain how to set the different values
and parameters• Teach Operation, Commissioning
and Maintenance
course Topics • Application area• Feeder protection principles • Applications• Relay functionalities:
Protections/Controls/Measurements/Fault records/monitoring/communications/disturbance records
• Relay functionality: theoretical and practical principles
• Common characteristics and specifi cities of the different types
• Setting with the MiCOM S1 software: menu description
• Product operation: 1st level maintenance/messages/read out of events and recorder analysis with Eview software
• Setting and test with injection set
micom p440, p630 & p540 RelayingPROP005
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 107
Contact us
price
Contact us
Dates & Place
2 days
PROP120 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of overcurrent and feeder protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
the participants will be able to operate and carry out maintenance on MiCOM P12x/P14x
• The participants can test the various functions of MiCOM P12x/P14x
Overcurrent and Feeder Protection micom p12x and p14x
objectives• Operate and maintain the MiCOM
P12x and P14x overcurrent and feeder protection relay
course Topics • Reminder on overcurrent and feeder
protection application• P12x/P14x functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P12x/P14x
functions• Product connection• Test with current injection• P12x/P14x hardware• Maintenance• Hands-on
PROP120
108 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
PROP121 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of motor protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, the
participants can operate and carry out maintenance on MiCOM P22x/P24x
• The participants can test the various functions of MiCOM P22x/P24x
objectives• Operate and maintain the MiCOM
P22x and P24x motor protection relay
course Topics • Reminder on motor protection
application• P22x/P24x functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P22x/P24x
functions• Test with current injection• P22x/P24x hardware• Maintenance• Hands-on
motor protection – micom p22x and p24xPROP121
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 109
Contact us
price
Contact us
Dates & Place
3 days
PROP122 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of generator and protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P34x
• The participants can test the various functions of MiCOM P34x
objectives• Operate and maintain the MiCOM
P34x generator protection relay
course Topics • Reminder on generator protection
application• P34x functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P34x functions• Product connection• Test with current injection• P34x hardware• Maintenance• Hands-on
Generator protection – micom p34xPROP122
110 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 to 5 days
PROP123 70% practical30% theoretical
Good knowledge of electrical substationsGood knowledge of distance protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
the participants can operate and carry out maintenance on MiCOM P44x
• The participants can test the various functions of MiCOM P44x
objectives• Operate and maintain the MiCOM
P44x distance protection relay
course Topics • Reminder on distance protection
application• P44x functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload and
download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P44x functions• Product connection• Test with current injection• P44x hardware• Maintenance• Hands-on
Distance protection − micom p44xPROP123
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 111
Contact us
price
Contact us
Dates & Place
1 to 4 days
PROP124 70% practical30% theoretical
Good knowledge of electrical substationsGood knowledge of differential protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P52x/P54x
• The participants can test the various functions of MiCOM P52x/P54x
course Topics • Reminder on line differential protection
application• P52x/P54x functionality• Product characteristics• Communication between relays• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P52x/P54x
functions• Product connection• Test with current injection• P52x/P54x hardware• Maintenance• Hands-on
objectives• Operate and maintain the MiCOM
P52x and P54x line differential protection relay
Line Differential protection – micom p52x and p54xPROP124
112 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
1 to 3 days
PROP125 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of voltage and frequency protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P92x/P94x
• The participants can test the various functions of MiCOM P92x/P94x
objectives• Operate and maintain the MiCOM
P92x and P94x voltage and frequency protection relay
course Topics • Reminder on voltage and frequency
protection application• P92x/P94x functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P92x/P94x
functions• Product connection• Test with current injection• P92x/P94x hardware• Maintenance• Hands-on
Voltage and Frequency protection micom p92x and p94x
PROP125
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 113
Contact us
price
Contact us
Dates & Place
3 to 5 days
PROP132 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of railway protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P438
• The participants can test the various functions of MiCOM P438
objectives• Operate and maintain the MiCOM
P438 railway distance protection device
course Topics • Reminder on P438 application• Reminder of specifi city of railway
protection application• P438 functionality• Product characteristics
• Relay MMI: front panel, LEDs, push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• Disturbance, fault, event records• Detailed presentation of P438
functions• Product connection• Test with current injection• P438 hardware• Maintenance• Hands-on
Distance protection Device for Railway Application micom p438
PROP132
114 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
PROP127 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of power transformer protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P63x
• The participants can test the various functions of MiCOM P63x
objectives• Operate and maintain the MiCOM
P63x differential transformer protection device
course Topics • Reminder on transformer protection
application• P63x functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• Disturbance, fault, event records• Detailed presentation of P63x functions• Product connection• Test with current injection• P63x hardware• Maintenance• Hands-on
Differential Transformer protectionmicom p63x
PROP127
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 115
Contact us
price
Contact us
Dates & Place
3 to 5 days
PROP128 70% practical30% theoretical
Good knowledge of electrical substationsGood knowledge of distance protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
the participants can operate and carry out maintenance on MiCOM P437
• The participants can test the various functions of MiCOM P437
objectives• Operate and maintain the MiCOM
P437 distance protection device
course Topics • Reminder on distance protection
application• P437 functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload and
download• Disturbance, fault, event records• Detailed presentation of P437
functions• Product connection• Test with current injection• P437 hardware• Maintenance• Hands-on
Distance protection Device – micom p437PROP128
116 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
PROP129 70% practical30% theoretical
Good knowledge of electrical substations Work with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P139
• The participants can test the various functions of MiCOM P139
objectives• Operate and maintain the MiCOM
P139 feeder protection device
course Topics • Reminder on P139 application• P139 functionality• Product characteristics• Relay MMI: front panel, LEDs,
push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload and
download• Disturbance, fault, event records• Detailed presentation of P139
functions• Product connection• Test with current injection• Control box/selection/creation of bay• P139 hardware• Maintenance• Hands-on
Feeder protection Device − micom p139PROP129
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 117
Contact us
price
Contact us
Dates & Place
3 to 5 days
PROP130 70% practical30% theoretical
Good knowledge of electrical substations Good knowledge of busbar protection principlesWork with PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM P74x system
• The participants can test the various functions of MiCOM P74x system
• The participants will have reached a good level of knowledge on busbar protection principles
objectives• Operate and maintain the MiCOM
P74x digital differential busbar protection system
course Topics • Reminder on P74x application• Reminder on busbar protection
application• P74x functionality• P74x system architecture, presentation
of the different modules, communication between modules
• System characteristics
• Topology: principles, examples, confi guration, virtual feeder
• Module MMI: front panel, LEDs, push-buttons, navigation through front panel
• Alarms & acknowledgement• MiCOM S1 software• Parameter fi le creation, upload
and download• PSL fi le creation, upload and download• Disturbance, fault, event records• Detailed presentation of P74x functions• Product connection• Test with current injection• P74x hardware• Maintenance• Hands-on
Digital Differential Busbar protection − micom p74xPROP130
118 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
PROP131 70% practical30% theoretical
Good knowledge of electrical substations Basic knowledge on disturbance record and power quality principlesGood level in PC under Windows environment
• Electrical engineers, operators, maintenance engineers, protection design engineers
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
and carry out maintenance on MiCOM M57x/M87x recorders
• The participants can parameter the various functions of MiCOM M57x/M87x
objectives• Operate, maintain and parameter the
MiCOM M571/M572, M871/M872 recorder equipments
course Topics • Reminder on disturbance and power
quality principles• M57x/M87x functionality• Product characteristics• Detailed description of product
functions• Parameterizing using M57x/M87x
confi gurator tool• Use of BiView tool• Data understanding• Product connection• Communication• Alarms & acknowledgement• Maintenance• Hands-on
Disturbance and Power Quality Recorder micom m57x/m87x
PROP131
design
installatiOn
OperatiOn
maintenance
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 119
Contact us
price
Contact us
Dates & Place
3 days
PROP006 30% theoretical70% practical
Basic principles of power system protection
• Engineers involved in the protection of railway electricity
• Technicians and engineers from application or control departments, project managers, technicians or operators
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will have a thorough
knowledge of maintaining their protection system
• Participants will increase their fault fi nding and troubleshooting abilities for the protection system, thus reducing plant shutdown
objectives• Teach the principles and application
of railway protection
course Topics • Requirements for stream and tension
converter for protection applications • Basics of overcurrent applications • Basic transformer-differential
protection for feeder lines • Basic distance protection facilities
for overhead line arrangements
• Operating draft and operating programs
• Overcurrent protection mechanisms HP 492, MiCOM P138
• Transformer protection facilities PQ 792, MiCOM P638
• Overhead line protection facilities PD 591, MiCOM P436/P438
• Practical exercises with test facilities as well as settings about PC/notebook
• Exercises for the case evaluation with operating programs
design
installatiOn
OperatiOn
maintenance
Railway ProtectionPROP006
120 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
design
installatiOn
OperatiOn
maintenance
management 3 days
scs001 20% practical80% theoretical
General knowledge of substation control systems
• Engineers and managers working and making decisions in the substation control system environment who need deeper knowledge on either their operational needs or decision making
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will gain an in-depth
knowledge of operational needs for digital control systems
• Staff members completing this course are expected to be able to improve their contribution and be more informed in the workplace
• Managers completing this course are expected to be comfortably conversant with the system, project engineering and be better equipped to make more informed decisions
objectives• Gain a deeper understanding of the
relevance and impact of substation control, of protection and the functions of distant control
• Cover project engineering for a digital control system and hands-on practical experience using PACiS
• Learn the basic principles of digital control system
course Topics • Choice of system components• Operating level, operating surfaces,
operating hierarchy• Construction of communication
structures• Construction of systems• Project engineering and service tools,
construction and application• Expiry and winding-up of a project• Case examples/exercises with PACiS
Advanced Digital control systemscs001
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 121
Contact us
price
Contact us
Dates & Place
design
installatiOn
OperatiOn
maintenance
management 2 days
scs010scs002 100% theoretical(incl. demonstration)
Basic understanding of electricity
• Substation control system engineers, decision-making managers in substation control systems
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session is a good introduction
to Digital Control System. It provides the knowledge necessary to understand its advantages and application
• You will be able to choose the most appropriate solution for your needs and scale it in terms of function, architecture and services
objectives• Give an overview of the architecture
and the task setting within the digital control system environment
• Show the relevance and impact of control and protection and the functions of distant control
• Teach electrical Energy Essentials
course Topics • Application features, system structure• Components at fi eld level• Components at station level• Communications overview• Leading-engineering functions
Basic principles of Digital control systemscs002
122 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2.5 days
scs003 100% theoretical
Substation environment, protection and control current applications
• End users and system integrators who want to specify and/or follow-up a IEC 61850 projectSystem architects and consultants who want to understand future evolutions of the substation and network automation applications
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will have a thorough
knowledge in IEC 61850 Standards to substation Automation projects
• End users and System integrators will know about specifi cations and have the required knowledge to improve project follow-ups
• The System Architects & Consultants are expected to have gained a better understanding of future evolutions of the substation Automation applications
• Training on the PACiS system is interesting since it is structured under IEC 61850 protocol
objectives• Explain how to move from the 1000+
pages of the IEC 61850 standard to real substation automation projects
• Explain the key concepts and jargon of the standard
• Highlight what is not defi ned for a real project and discuss applications through real products and projects
course Topics IEc 61850 From paper to Business OverviewIEc 61850 concepts• Services• Modelling• Substation confi guration language• Conformance testsGoing for real projects• Architectures• Distributed functions• Retrofi t cases• System confi guration• Interoperability tests• Project management
Application on IEc 61850communication protocol
scs003
design
maintenance
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 123
Contact us
price
Contact us
Dates & Place
2 days
Knowledge on substation automation and basic protection
scs004 100% theoretical
• Engineers working in the area of substation automation or/and engineers working in the planning of the application
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The trainees will have the necessary
knowledge to clearly understand the performances and the limits of the IEC protocols
• The trainees will be able to optimize the data to be exchanged, for example, between substation and SCADA, and to analyze communication protocol
• Application on IEC 61850 Communication Protocol
objectives• Teach the theory and application
of communication within the substation control station, including a comprehensive discussion of the information models, confi guration language and services
• Explain the latest development and the future of IEC 61850
course Topics Bases of the communication technology• Authoritative model OSI• Protocols in the station automation• Communication structures• Norms (today and tomorrow)
communication networks• Construction and structure• Facilities• Requirementspresent communication• IEC 60870-5-103• IEC 60870-5-101• IEC 60870-5-104IEc 61850• Construction of the norm• Data model and data services• Structures• Application
design
installatiOn
maintenance
communication as per IEc 60870 and IEc 61850
scs004
124 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
scs005 100% theoretical(incl. demonstration)
scs002 Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Technicians and engineers from design or control departments, project managers, operation/maintenance technicians
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session is a good presentation
of Digital Control System MiCOM S10• It presents the main architecture of this
system and explains the features available with this solution
• Moreover, it gives operation and maintenance teams autonomy in their daily jobs
Customer Benefi ts
objectives• Understand and use the Digital Control
System MiCOM S10• Defi ne the subsets of the system
including communication protocol• Understand how to carry out
commissioning and fi rst level maintenance
course Topics • Introduction to the Digital Control
System• The system MiCOM S10:
fi eld area/functionalities/architecture• RTU: hardware architecture• Operation mode/screen views/remote
control/sequence of event recording/historical trends
• The Bay Module: functionalities/confi guration tools/automatism/download
• Communication with the relays, protocols
• Disturbance and Event recordings tools• Confi guration modules• Maintenance: 1st level/error messages• Hands-on
micom s10: protection-Based substation control system
scs005
installatiOn
OperatiOn
maintenance
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 125
Contact us
price
Contact us
Dates & Place
4 days
scs006 40% practical60% theoretical
Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Technicians and engineers from design or control departments, project managers, operation/maintenance technicians
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session is a good presentation
of MiCOM C264 applied to RTU applications. It shows the main structure of this system and explains the features available with this solution
• This course gives operation and maintenance teams autonomy in their daily jobs
• Control Function in OBS (One Box Solution) and Bay Computer Devices, Basic Digital Control Systems
objectives• Understand and use the compact RTU
MiCOM C264• Understand how the new compact
RTU allows decentralized control and monitoring
course Topics • New functionalities of the compact
RTU• The MiCOM C264: fi eld area/
functionalities/architecture• RTU: hardware and software
architecture• Man Machine Interface• Confi guration tools• Maintenance: 1st level/error messages• Hands-on
design
installatiOn
maintenance
micom c264: compact RTU (Remote Terminal Unit)scs006
126 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
scs007 10% practical90% theoretical
Electrical substation knowledgeKnowledge of WindowsTechnician or engineer level
• Technicians and engineers from design or control departments, project managers, operation & maintenance staff managers
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session brings key knowledge
on digital control systems• It gives the necessary knowledge
to understand the corresponding advantages and application, appliedon PACiS
• It gives an overview of operation & maintenance in a PACiS system
objectives• Give an overview of the architecture
and the task setting within the digital control system environment
• Understand what a digital control system is
• Have a good understanding of PACiS solution, as well as on the functional capability, operation and maintenance point of view
course Topics • Introduction to digital control system
(DCS)• Global overview of DCS: architecture,
communication principles, IEDs, bay computers, gateways, Operator Interface
• Introduction to IEC61850 communication standard
• DCS specifi cation principles• Architecture examples• PACiS architecture, elements,
communication principles, operation principles
• PACiS tools• MiCOM C264 bay computer• PACiS Operator Interface, alarm,
control, security• PACiS maintenance Tools and process• Hands-on
Fundamentals of Digital control system and pAcis operation & maintenance principles
scs007
installatiOn
OperatiOn
maintenance
management
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 127
price
Contact us
Dates & Place
3 days
scs009
Contact us
scs00870% practical30% theoretical
• Operators, electrical staff of PACiS system
design
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The participants will be able to operate
the PACiS system
objectives• Learn the basis of PACiS• Give an overview of PACiS architecture
and components focusing on PACiS Operator Interface and how to operate the system
course Topics • PACiS architecture, elements,
communication principles, operation principles
• PACiS Operator Interface, screen views, alarm, log, control, command, security
• Hands-on at PACiS Operator Interface• MiCOM C264 bay computer• Hands-on with MiCOM C264• Maintenance level 1
pAcis protection Automation & control – operationscs008
128 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
scs010scs009 50% practical50% theoretical
scs008 Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Technicians and engineers from design or control departments, project managers, operation/maintenance technicians
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session provides the knowledge
necessary to understand the advantages and application of the PACiS digital control system
• Gives operation and maintenance teams autonomy in their daily jobs
objectives• Learn how to use PACiS• Gain an overview of various subjects
allowing participants to understand the PACis Integrated Solution
• Learn how to operate, defi ne the subsets and carry out maintenance on the system
course Topics • Introduction to the Digital Control
System• Field area/functionalities/architecture• PACiS Operator Interface: Man
Machine Interface/Alarms monitoring/ Control/ Security
• C264 bay computer: functionalities/ hardware overview /Maintenance Trouble shooting & commissioning
• Data base of the system/process confi guration/confi guration editor/data base management
• PACiS Gateway for SCADA communication
• Hands-on
pAcis protection Automation & control – Architecture, operation & maintenance
scs009
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 129
Contact us
price
Contact us
Dates & Place
10 days
scs003 scs010 70% practical30% theoretical
scs002 scs009Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Technicians and engineers from design or control departments, project managers, operation/maintenance technicians
design
installatiOn
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session provides the knowledge
necessary to understand the advantages and application of the PACiS digital control system
• This session gives operation and maintenance teams autonomy in their daily jobs
• It allows the system administrator to perform some common modifi cations in PACiS using the System Confi guration Editor tool
Customer Benefi ts
objectives• Understand and use the PACiS
Integrated Solution• Defi ne the subsets of the system,
operate it and understand how to carry out commissioning and maintenance
• Be able to make some modifi cations in the substation confi guration fi le
course Topics • Introduction to the Digital Control
System• Field area/functionalities/architecture• PACiS Operator Interface: Man
Machine Interface/Alarms monitoring/control/security
• C264 bay computer: functionalities/hardware overview/Maintenance
• Data base of the system/process confi guration/confi guration editor/database management
• System software installation• System Confi guration Editor/basic
system confi guration (label change, alarm on/off, event set up, graphical change, scheme logic change)
• PACiS Gateway for SCADA communication
• System maintenance/System Management Tool/Troubleshooting & commissioning
• Hands-on
pAcis protection Automation & control – Architecture, operation, maintenance, Basic confi guration
scs010
130 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
scs011 50% practical50% theoretical
scs002 Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Technicians and engineers from design or control departments, project managers, operation/maintenance technicians
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session provides a good knowledge
of the digital control system SPACE 2000 and enables participants to understand its advantages and application
• Gives operation and maintenance teams autonomy in their daily jobs
objectives• Understand and use the SPACE 2000
Digital Control System• Be able to defi ne the subsets of the
system, to operate it and to understand how to carry out fi rst level maintenance
course Topics • Introduction to the Digital Control
System• SPACE 2000 system: functionality• Hardware & software description• Operation• EPA 2000 substation computer:
hardware & maintenance• CCA central computer: hardware &
maintenance• System connection & communication:
database loading• System confi guration introduction:
basics on confi guration & graphical tools
• Maintenance – 1st level• Hands-on
spAcE 2000 Digital control systemscs011
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 131
Contact us
price
Contact us
Dates & Place
10 days
scs012 70% practical30% theoretical
scs002 Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Technician and engineer from design or control departments, project managers, operation/maintenance technicians
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This session provides good knowledge
on the Digital Control System• PSCN3020 in order to understand
the corresponding advantages and application, applied on PSCN3020 product
• This session gives operation and maintenance teams autonomy in their daily jobs
• It allows the system administrator to perform some common modifi cations in PSCN3020 using the confi guration tools
objectives• Understand and use the Digital Control
System PSCN3020• Defi ne the subsets of the system• Control from station computer and bay
module• Learn how to make some modifi cations• Understand how to carry out
commissioning and fi rst level maintenance
course Topics • Introduction to the Digital Control
System• The system PSCN3020: functionalities/
architecture/EFI.P network• Operation mode/screen views/remote
control/sequence of event recording/historical trends
• The Bay Module: functionalities/confi guration tools/automatism/download
• Communication with the relays, protective equipments
• Gateway with the SCADA: description and confi guration
• Confi guration modules: graphics tools/data base modifi cation
• Maintenance: 1st level/error messages• Hands-on
pscN3020: Integrated protection & Distributed Digital control system
scs012
132 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
10 days
scs014 40% practical60% theoretical
Electrotechnical and operation in substation basisGood knowledge of WindowsTechnician or engineer level
• Personnel in charge of the operation or the maintenance
• Engineers and designers responsible for integrating this equipment in telecommunications networks
installatiOn
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• The trainees will have the opportunity
to practice with instructors who have experience on these system versions. They will benefi t from Alstom Grid experience in these fi elds, and will be in a position to maintain their systems on an optimum level
Customer Benefi ts
objectives• Understand and use RTU and
PROCETT systems through installation, confi guration and maintenance modules
course Topics Procett 5000 W Portion• Presentation of Procett 5000 W
environment: upper and lower level control center UGESL, modbus and peripherals such as printers…
• Download of Database• Description of Database entities• Installation of graphical editor on a PC• Graph description• Build up of a training Database• Build up of graphs• Installation on a PC and confi guration• Description of the main functions
of the application
s900 RTU portion• Presentation of S900 RTU equipment• Software structure overview• Hardware structure overview• Description of the different boards:
(PCU900, CPU900, FBS910, SAU900, DOU910, DAU900, ACU900, AAU900, AOU900)
• Installation of the Database on the S900 system
• Description of the parameters relevant to Database
• Build up of a training Database• Installation of Winload, downloading
program in Database• Analysis of the information on the
terminal• Man Machine Interface• Troubleshooting maintenance• Interconnection module possible
between S900 RTU and Procett 5000 W system
s900 RTU and procett 5000 w operation & maintenancescs014
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 133
Contact us
price
Contact us
Dates & Place
Customer Benefi ts
3 days
scs020 50% theoretical50% practical
Experience in MiCOM Px30 & Px40 seriesExperience in MiCOM S1 Studio software
design
installatiOn
OperatiOn
maintenance
• Technicians and engineers from design or control departments, Protection engineering staffs, Commissioning engineers
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer
NEw
objectives• Operate the IEC 61850 communication
facility from MiCOM Px30 & Px40 series
• Be able to use the IED Confi gurator tool from MiCOM S1 Studio
course Topics • Basic knowledge of IEC61850 focusing
on protection engineering & fi eld engineers needs
• Service, modeling, network architectures, confi guration fi les, time synchronization, GOOSE and Reports, controls
hands-on• IED Confi gurator use• Scl fi le management• Protection relay identifi cation
and basic parameters• Time synchronization management• Protection relay data model through
the documentation• Data Set creation• Report Control Blocks use• Goose confi guration• Control confi guration
confi guration of IEc 61850 communication on micom Px30 and Px40 series
scs020
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
NEw
network management137 • Introduction to e-terraplatform/e-terrahabitat Emsp034138 • Introduction to e-terrahabitat Emsp017139 • e-terrahabitat Databases Emsp012140 • scADA and Alarm Features Emsp038141 • e-terrahabitat system management Emsp013142 • managing high Availability systems Emsp019143 • e-terracomm Emsp008144 • e-terraplatform security management Emsp015145 • e -terracontrol for e-terraplatform customers Emsp009146 • e-terracontrol troubleshooting Emsp011147 • Building Full Graphic Displays for e-terracontrol using e-terrabrowser Emsp050148 • e-terracontrol for non-e-terraplatform customers Emsp010149 • programming in e-terracontrol Emsp023150 • programming in e-terrahabitat Emsp022151 • Introduction to e-terramodeler Emsp018152 • Alarm modeling for Real-time operations Emsp001153 • Building Full Graphic Displays using e-terrabrowser Emsp005154 • Advanced UI concepts Emsp033155 • Building a scADA model Emsp004156 • Building a Network model Emsp003157 • Building a Generation model Emsp002158 • Building a DTs model Emsp024159 • Building a substation Emsp025160 • e-terrasimulator Instructor Emsp016161 • Network Analysis Emsp020162 • Network optimization Emsp021163 • Network Application Features Emsp036164 • Generation Application Features Emsp030165 • e-terraloadforecast Emsp029166 • e-terracommit Emsp028167 • e-terravision Emsp049168 • e-terraarchive Emsp007169 • e-terraplatform 2.x – 2.y Delta course Emsp014170 • Full Network system from Field to scADA Emsp042171 • Using Alstom Grid’s Graphical modeler Emsp040172 • iGRID Emsp032173 • Database building with DDB Emsp026174 • protocol Analysis Emsp053175 • historical Data management EmsG054176 • Ems Database and Display maintenance Emsp055177 • Introduction to e-terradistribution Dmsp001178 • Introduction to e-terraarchitecture Dmsp003179 • e-terradistribution Databases Dmsp004180 • e-terradistribution system management Dmsp006181 • e-terradistribution model management Dmsp007182 • e-terradistribution Operator Training Dmsp010
telecommunications 183 • ALcATEL pABX pcX 4400 TEL003184 • Data Acquisition through the Telecommunications Network TEL005185 • AREVA sDh msE 5xxx TEL006186 • AREVA pLc5000 TEL007187 • AREVA pDh DXc5000 TEL009188 • AREVA micom T390 TEL010189 • AREVA DIp5000 Analog/Digital TEL012190 • optical Fiber within a Transmission network TEL022191 • Alcatel pDh 1511BA and 1515cX-c TEL002192 • philips pABX sopho is3000 TEL004193 • AREVA sDh Networks TEL020194 • AREVA pDh Networks TEL021195 • hUAwEI sDh osNxxxx TEL023196 • AREVA e-DXc TEL027
197 • Additional programs
Utilities and industries want a comprehensive set of tools that boosts automation and enables smarter grid operation, both at the substation and the regional level. From protection relays and remote telemetry units (RTU), to the most advanced Network Management System (NMS), every single element contributes to secure your network and prevent blackouts. All these new issues are already integrated in our training courses.
networK ManageMent
136 I Globa l Tra in ing Offer
Alstom Grid Technical Institute proposes theoretical and application trainings in:• e-terra application suite for Energy Management (EMS/GMS) and Distribution Management (DMS/OMS), to have a thorough understanding of the system architecture found in control centers, to introduce its key software components and to highlight its main functional features and administration capabilities. This will allow your staff to gain the adequate expertise for proper operation and control of their mission critical assets.
• telecom solutions, to have a global approach of utility telecommu-nications, from point-to-point to latest protocols specific to SCADA. The courses are dedicated to equipment, technology and interfaces with other devices. This will enhance your personnel’s ability to ensure reliable and secure data transmission.
competence management is at the heart of our training solutions.We focus on the trainee’s ability to put his knowledge to work and to make a difference in his organization. A pre-course assessment, combined with online and coaching, adapts the time spent in the classroom and produces positive operational benefits more precisely.
Network Management courses can be combined to create twelve curriculums:Application Developer, System Integrator, Telecom Engineer, System Maintenance & System Administrator, Network Generation Analyst, Power System Modeler, Display Builder, DTS Instructor, System Operator and Control Center Manager.
In addition, workshops and drills conducted on simulators running recorded savecases offer an ideal training environment for a new generation of EMS/DMS operators. Moreover, Alstom Grid Technical Institute can host an image of a real-life configuration and grant remote access to it for practice purposes (“Sandbox”).Providing up-to-date training courses is what we do.
matching your needs
Globa l Tra in ing Offer I 137
prOfiles audience learning path duratiOn
Contact us
price
prerequisites training neXt step 1 to 2 days
Emsp034 100% theoretical
Minimal fl uency in Hardware/Software architectures and power systems fundamentals
• Project managers and programmers who use e-terrahabitat to develop applications, engineers who use those applications, operations staff, and operations management personnel
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to describe
the main subsystems in e-terraplatform and their relationship, and will have an understanding of e-terrahabitat concepts, components and of the general steps required to create an application
objectives• Present the general architecture
and a functional overview of the e-terraplatform system including an overview of its implementation for transmission and distribution
• Focus on the e-terrahabitat subsystem: familiarize students with e-terrahabitat architecture, the man-machine interface (MMI), the basics of database and application development
• Introduce students to WebFG, the e-terrahabitat user interface processor and its command language
• Prepare students for all other courses in the e-terrahabitat series
course Topics • e-terraplatform architecture, concepts,
and components• e-terrahabitat architecture, concepts,
and components• Processes and procedures for
application development• Processes and procedures for creating
databases• Database management and control
Introduction to e-terraplatform/e-terrahabitatEmsp034
management
138 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
1.5 days
Emsp012Emsp018
Emsp017 50% practical50% theoretical
None
• Anyone who will be working in an Alstom Grid software environment
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will become familiar with basic
e-terrahabitat organizational methodology, utilities, and components of an application
• Students will be exposed to theAlstom Grid user interface for accessing real-time information
• Students will become familiar with hierarchical databases and HDB utilities
• Students will learn the core and supporting applications that make up the e-terrahabitat system
objectives• Introduce the basic design of
Alstom Grid e-terrahabitat, which provides the foundational layer for real-time control system, software development and operation
• Explain key HABITAT terms and concepts of the software architecture, including data management, e-terrabrowser user interface, core and supporting applications, and utilities embedded in e-terrahabitat
course Topics • Fundamental e-terrahabitat terms
and concepts• Overview of the application
development environment and user interface
• Organization of e-terrahabitat-based applications and databases
• Introduction to basic e-terrahabitat core operations and supporting utilities
Introduction to e-terrahabitatEmsp017
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 139
Contact us
price
2 days
Emsp013 Emsp018Emsp005
Emsp017 Emsp012 70% practical30% theoretical
• e-terrahabitat users It is particularly benefi cial for e-terrahabitat application Programmers who wish to create data access from their programs; display builders who wish to link data to the user interface; and data Management System (EMS) data to the Alstom Grid system
design
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will understand how
hierarchical databases work and how to use the various HDB utilities that come with e-terrahabitat
• Students will learn how to use navigate, delete, insert records, and fi elds
• The use of parent-child and indirect pointers will also be covered
• Students will be able to defi ne and modify database and clone schemas
• Students will be able to create, backup, and export clone data using the various HDB utilities
Contact us
Customer Benefi ts
Dates & Place
objectives• Introduce students to e-terrahabitat
database (HDB) design concepts necessary to create and understand HDB data defi nitions and instances managed by e-terrahabitat’s HDB server process
• Explain multiple types of data structures and data relationships
• Teach techniques for creating, populating and archiving from these data structures
course Topics • Overview of the application
development process• e-terrahabitat data concepts and
supported data structures• How to create and read e-terrahabitat
database schemas• How to defi ne records, partitions,
fi elds, and other database elements• Data population techniques• Data archiving, exporting and
importing
e-terrahabitat DatabasesEmsp012
140 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
Emsp038 20% practical80% theoretical
Emsp017 Emsp012
• Programmers and operations personnel who use or build and maintain displays, databases and alarms for their SCADA system will benefi t from this course
• For engineers, we would recommend “Building a SCADA Model” EMSP004 instead
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to use SCADA
on an operational level and will also understand the breadth of optional features available in SCADA and Alarm Components. The management of the SCADA database is not an objective of this course
objectives• Teach how the SCADA system
processes and displays measurements, controls, and alarms on the monitored system
course Topics • A presentation of SCADA related
applications: Alarm Management, Historical Data Recording, Tagging, Load Shed
• SCADA system functions, including processing of Data acquisition, evaluating data quality SCADA Alarms, Status and analog measurements, Pulse accumulators, Custom calculations on data
• SCADA databases• If the teaching site has the Alstom Grid
DTS demonstration system running, the course includes student practice in using real-time SCADA and Alarm features
scADA and Alarm FeaturesEmsp038
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 141
Contact us
price
Contact us
Dates & Place
5 days
Emsp019 Emsp013 80% practical20% theoretical
Emsp017 Emsp012 Emsp050A basic understanding of operating system commands for the operating system upon which your e-terrahabitat is expected
• System management tasks with Alstom Grid layered software
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to install
and confi gure an e-terrahabitat system• Students will learn both the functionality
and the internal organization of e-terrahabitat, and demonstrate troubleshooting techniques for error analysis and recovery
• Students will learn how to customize the e-terrabrowser user interface subsystem
Customer Benefi ts
e-terrahabitat system managementEmsp013
course Topics • Overview of e-terrahabitat architecture
and functionality of shell applications• Installing and upgrading e-terrahabitat• e-terrahabitat fi le organization and
management tools• Environment variables and database
fi elds• Confi guration fi le use and syntax• Full user-interface management
techniques on both host and client systems: alarm interface, e-terrabrowser environment management, and context sensitive help
• Troubleshooting techniques for most common problems
objectives• Prepare a system administrator
for installation, confi guration and maintenance of an e-terrahabitat shell system
• Provide instruction for use and confi guration of network communications services, e-terrabrowser installation and confi guration, time and date services
• Provide high availability overview for Process Manager, Confi guration Manager and Memory Replication Services (MRS), including a basic exposure to the e-terrahabitat utilities that manage startup, shutdown, scheduling, and monitoring of processes that make up the real-time system
• Cover troubleshooting techniques used to anticipate, prevent, and respond to most common system level problems that affect the end user
142 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
5 days
Emsp022Emsp008
Emsp013 Emsp017 Emsp012
Emsp019 50% practical50% theoretical
• System administrators and system integrators responsible for the confi guration and maintenance of successful, functioning systems in a redundant environment
• Application developers who plan to write application codes that will extend or modify Alstom Grid delivered e-terrahabitat based systems
design
installatiOn
maintenance
Customer Benefi ts
Dates & Place
Contact us
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will understand the data
objects that make up the PROCMAN model and how they are used to sequence and conditionalize system functions
• They will be able to describe the data objects that make up the CFGMAN model and explain how they are used to make decisions regarding when and where system functions are enabled
• They will become familiar with CFGMAN, PROCMAN and MRS user interfaces during both machine transitions and normal operations
• They will become familiar with the sequence of events during the standard EMS machine startup and machine transition from standby to enabled
objectives• Give detailed knowledge about the
confi guration and operation of service utilities which start, enable, schedule, and conditionalize process execution of functions in a redundant system environment
• Cover standard data models and the user interface for PROCMAN and CFGMAN and the operation of Memory Replication Services (MRS)
course Topics • Overview of CFGMAN subsystem,
processes, and interface with other subsystems
• CFGMAN models and their use in system component status-checking and role assignments
• CFGMAN and PROCMAN user interfaces
• Overview of PROCMAN subsystem, processes, and interface with other subsystems
• PROCMAN model, its data objects, and how they are used to sequence and conditionalize the processing of system functions
• MRS processing during machine transitions and redundant operations
• Troubleshooting startups and machine transitions
managing high Availability systemsEmsp019
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 143
Contact us
price
3 days
Emsp009Emsp008 50% practical50% theoretical
Emsp019 Emsp017Emsp012Emsp004
• Power system modelers, system administrators, and system integrators who are responsible for exchanging Energy Management System (EMS) data with external parties
design
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Alstom Grid Technical Institute is equipped
with all the necessary equipment to ensure that participants enjoy a comprehensive ‘hands-on’ experience, learning both theory and practical application
• Students will understand the e-terracomm architecture and how data fl ows within it
• Students will be able to describe the basics of ICCP terminology and functionality, and describe the primary software objects that make up the e-terracomm model and understand how the software and processes make these objects
• Students will be able to create and confi gure an e-terracomm data model that both sends and receives data from other systems, and gathers diagnostic information to diagnostic common e-terracomm problems
objectives• Give detailed knowledge of the Alstom
Grid open access gateway (OAG) system, which facilitates the exchange of data with external control centers via various protocols
• Cover in detail e-terracomm’s use of both ICCP (TASE.2) and ISD, including installation, confi guration, creation of necessary objects in the data model, and diagnosis and repair of common OAG problems
course Topics • Overview of the e-terracomm
architecture, user interface, and operations
• Relationship of software objects that make up the e-terracomm model
• Support of diagnostics and troubleshooting
• Supported protocols (ISD and ICCP in particular)
• Relationship of ICCP and MMS software layer
e-terracommEmsp008
144 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
2 days
Emsp009Emsp015 20% practical80% theoretical
Emsp008 Familiarity with basic system management concepts related to an e-terraplatform environment
• Engineers involved in maintaining e-terraplatform systems, particularly those directly involved with system/network management and integration
• Most benefi cial to users who are planning or implementing a migration to this level
design
installatiOn
OperatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, students
will understand the essential security concepts and requirements for operating an Alstom Grid Energy Management System in a secure manner
• Participants will become familiar with the documented procedures and specifi c steps required to securely confi gure and manage an e-terraplatform environment
objectives• Provide a platform overview
of all the important aspects that must be addressed to ensure the security of your e-terraplatform systems. Specifi cally, the course introduces security concepts, policies, design, and implementation that are necessary for the deployment and management of a secure e-terraplatform environment
course Topics • Overview of security process• Security concepts• Security risk assessment and threat
modeling• Overview of e-terraplatform security
design and documentation• Network security – Secure fi rewall
confi guration• Host security – Secure base operating
system install procedure – Windows, Linux (optional)
e-terraplatform security managementEmsp015
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 145
Contact us
price
4 days
Emsp023Emsp014
Emsp004 Emsp017 Emsp012 Emsp008
Emsp009 60% practical40% theoretical
• Integrators, system managers, project engineers who are installing and maintaining e-terracontrol servers as front-end processors for an e-terraplatform installation
installatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will understand the data
model and associated data attributes that make up e-terracontrol SCADA Server database
• Participants will understand how to use CFEReader for protocol translation and data acquisition
• Participants will be able to confi gure process starter
• Students will build e-terracontrol displays
• Participants will perform data source modeling
• Students will understand data processing, replication, redundancy and alarm processing
objectives• Give a broad understanding
of the e-terracontrol subsystem and its capabilities, focusing on the use of e-terracontrol as a front-end processor for e-terraplatform
course Topics • e-terracontrol Overview• e-terracontrol SCADA server,
measurement and data source models• Redundancy in e-terracontrol• e-terrabrowser integration between• e-terraplatform and e-terracontrol• Data and alarm communications• Resources for troubleshooting
Note: This course has been expanded to include information from the e-terracontrol Troubleshooting course. Students who have already taken this course should request to take the e-terracontrol Troubleshooting course separately.
e-terracontrol for e-terraplatform customersEmsp009
146 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Emsp011 70% practical30% theoretical
Emsp009 or Emsp010
• Those who install, maintain, and support e-terracontrol servers
installatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will cover details of
troubleshooting the two main data sources for e-terracontrol application: CFEReader for data acquisition and Intersite Data (ISD) for responding to polls for data
• Students will learn most commonly used components of the e-terracontrol system including ProcessStarter, SCADA, AlarmPager, DBUpdate, and the e-terrabrowser client
objectives• Explain the methods for
troubleshooting e-terracontrol systems• Show the students what logs
and utilities are available for troubleshooting
course Topics • e-terracontrol Overview• ProcessStarter Troubleshooting• SCADA Troubleshooting• Communications Troubleshooting• e-terraplatform Integration
Troubleshooting• Other Troubleshooting Utilities
e-terracontrol TroubleshootingEmsp011
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 147
Contact us
price
Contact us
Dates & Place
4 days
Emsp050 75% practical25% theoretical
Emsp033 e-terracontrol
• Any student who expects to be involved in display building for Alstom Grid e-terracontrol systems that use e-terrabrowser as their main user interface
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to use Alstom Grid
PC Display Builder to build effi cient e-terracontrol displays, mainly in schematic format
• An overview of tabular format concepts will also be provided
• Students will be able to provide navigation tools for end users of their displays and provide conditionality for their display objects based on changing real-time data
objectives• Give students hands-on experience
in creating displays for Alstom Grid systems using e-terrabrowser
• Give an overview of the real-time interface and e-terrabrowser architecture
• Show how to construct primitives, symbols, elements, as well as combining and linking them with data to produce both schematic and tabular displays
• Teach how to use graphic elements only available with e-terrabrowser
course Topics • e-terrabrowser subsystem overview• Creating and accessing graphics sets• Providing graphic attributes for display
objects• Construction of schematic displays• Introduction to tabular displays• Linking graphic objects to data• Making graphic objects conditional
on real-time data• Building menus, layers, placeholders,
and declutter zoom levels• Building pull-downs, toolbars and other
MS Windows-like widgets
Building Full Graphic Displays for e-terracontrol using e-terrabrowser
Emsp050
148 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
4 days
Emsp010 50% practical50% theoretical
Familiarity with SCADA Systems and the Microsoft Windows environment
• Integrators, system managers, project engineers who are installing and maintaining e-terracontrol servers
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will be able to create and
modify database objects• Participants will be able to provide
confi guration information for applications that communicate with the e-terracontrol SCADA Server
• Students will build e-terracontrol displays
• Participants will understand the functionality of provider/subscriber applications and subscriber applications
objectives• Provide a broad understanding of the
e-terracontrol subsystem and its capabilities, both from an operational basis as well as the model data that conditions the operations
course Topics • e-terracontrol Overview• e-terracontrol SCADA server• SCADA server measurement model• SCADA server data source model• Building displays for e-terracontrol
systems• Selected e-terracontrol client
applications• e-terracontrol provider/subscriber
applications• Redundancy in e-terracontrol• Troubleshooting resources
Note: This course has been expanded to include information from the e-terracontrol Troubleshooting course. Students who have already taken this course should request to take the e-terracontrol Troubleshooting course separately.
e-terracontrol for non-e-terraplatform customersEmsp010
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 149
Contact us
price
Contact us
Dates & Place
1 day
Emsp010 orEmsp009
Emsp023 60% practical 40% theoretical
• Application programmers who plan to read from, or write data to, an e-terracontrol system
design
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to code using
published e-terracontrol• Active-X controls that your program
can read, and process data sets for confi guration as well as read/write power system measurement data
objectives• Use programming interfaces
to exchange data with the e-terracontrol SCADA Server
• Give an overview of object-oriented programming and Microsoft’s COM concepts
• Cover all the data objects served by e-terracontrol’s SCADA Server and their properties and methods
• Give students program examples using Active-X controls in Visual Basic that they can take away at the end of the training
course Topics • OP/COM Basics• The e-terracontrol Object Classes• e-terracontrol interfaces• Active-X control properties and
methods
programming in e-terracontrolEmsp023
150 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
Emsp009Emsp022 50% practical50% theoretical
Emsp019 Emsp012 Emsp017 Emsp013
• Application programmers who plan to extend or modify Alstom Grid delivered applications
design
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to write programs
that access e-terrahabitat data, issue messages to logging databases, register their functions with PROCMAN and execute those functions asynchronously according to the PROCMAN model
• Students will register themselves with CFGMAN and accept role assignments as delivered by CFGCTRL, and open network communications with another process for exchanging data
• Students will read and write SCADA data to/from the EMS system, issue an alarm and accept and act on operator input from the user interface
objectives• Provide a foundation for application
developers who need to create new or modify an existing application code that uses e-terrahabitat or SCADA
• Cover all the major Application Program Interfaces (API) used by the EMS system programs including HDB, PROCMAN, CFGMAN, NETIO, ALARM, SCAPI, and RUSER
• Write a small program using AREVA’s Portable Process Model (PPM) to coordinate common asynchronous events handled by these API utilities
course Topics • Using the Portable Process Model
architecture (API)• Gaining data access (HDB API)• Issuing messages and status codes
from programs (MLF & SCF APIs)• Integrating into the system
(PROCMAN & APPMGR API)• Accepting roles (CFGMAN API)• Exchanging data (NIOSOCK API)• Communicating with SCADA
(SCAPI API)• Issuing alarms (ALARM API)• Communicating with the operator
(RUSER API)
Note: Although this is a new course, the course content is not. These topics were previously spread across two courses titled e-terrahabitat Programming and Advanced e-terrahabitat Programming.
programming in e-terrahabitatEmsp022
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 151
Contact us
price
Contact us
Dates & Place
1 day
Emsp004Emsp020Emsp001
Emsp018 60% practical40% theoretical
EMsp012Emsp017
• Data modelers, system integrators, and power system engineers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to demonstrate
modeling operations• Students will understand
the architecture of Alstom Grid e-terramodeler
• Students will be familiar with the e-terramodeler user interface
• Students will learn how to validate and place a model online
objectives• Explain how to populate the modeler
and maintain an Energy Management System power model in a single environment
• Have an intuitive, windows-based user interface with a single view of the multiple power model databases, a portable, modular, and extensible validation framework that supports saving, listing, and retrieving specifi c versions (savecases)
course Topics • e-terramodeler overview• Navigation between commonly used
modeling forms• General editing operations• Validating and archiving data• Demo of advanced modeling
techniques
Introduction to e-terramodelerEmsp018
152 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Emsp004 Emsp001 50% practical50% theoretical
EMsp012Emsp017
• System integrators, power system modelers, and engineers involved in the creation or maintenance of the alarm model for the monitored power system
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to customize the
way alarms are managed on site
objectives• Give hands-on experience in modeling
alarms so the participants can optimize the way events and alarms are managed in an Alstom Grid Energy Management System (EMS)
• Explain the modeling options provided in the alarm databases
• Focus on possible confi gurations to support acknowledgement, deletion, sounding and silencing of tones associated with alarms in a real-time operational environment
course Topics • Alarm terms, defi nitions, concepts
and databases• Event processing• Permission areas• Confi guring sound and silencing tones• Acknowledgement and deletion options• Global settings• Archiving methods• Confi guring Alarm Viewer to access
archive fi les• Alarm management scenarios• Alarm Page
Alarm modeling for Real-time operationsEmsp001
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 153
Contact us
price
Contact us
Dates & Place
5 days
Emsp033Emsp005 75% practical25% theoretical
Emsp017 Emsp012
• Any student who expects to be involved in building displays for Alstom Grid systems that use e-terrabrowser as their main user interface
design
installatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to use ALSTOM’s
Grid FG Display Builder to build effi cient displays, in both schematic and tabular formats
• Students will be able to add area permissions and conditional elements to their displays
• Students will be able to provide navigational capabilities to displays and provide conditionality to their display objects based on changing real-time data
Customer Benefi ts
objectives• Give students hands-on experience in
creating displays for Alstom Grid systems using e-terrabrowser Browser
• Give an overview of the user real-time interface and e-terrabrowser architecture
• Teach how to construct primitives and elements, as well as combining and linking them with data to produce both schematic and tabular displays
• Teach how to use graphic elements only available with e-terrabrowser
course Topics • Creating and accessing graphics
elements and display sets• Providing graphic attributes for
elements and display objects• Construction of schematic displays• Construction of tabular displays• Linking graphic objects to data• Making graphic objects conditional
on real-time data• Building menus, layers, placeholders,
and declutter zoom levels• Building menus and toolbars
Building Full Graphic Displays using e-terrabrowserEmsp005
154 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Emsp050 Emsp033 50% practical50% theoretical
Emsp017 Emsp012 Emsp005
• Display builders who wish to learn more advanced User Interface (UI) concepts to build dynamic displays
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will learn to use various
UI tools to build online and tabular displays
• Students will learn command line tools to build, publish and manage their displays
• Students will learn how to add dynamic data functionality onto online and tabular displays such as CAMs, ActiveX controls, JavaScript/VBScript
objectives• Cover advanced topics on building
dynamic one-line and tabular displays• Present various UI tools to build
displays including integrating CAMs and ActiveX controls, JavaScript/ VBScript within the FG Displays Builder, iGRID plug-in, and iGRID Designer
course Topics • Adding CAMs and ActiveX controls
to displays• Using Cascading Combo boxes• Using JavaScript/ VBScript• Publishing displays and display
management via command line utilities• Using the iGRID plug-in• Creating data with iGRID Designer
Advanced UI conceptsEmsp033
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 155
Contact us
price
Contact us
Dates & Place
3 days
Emsp003Emsp004 40% practical60% theoretical
EMsp017 Emsp012 Emsp001
• System integrators, power system modelers, and SCADA engineers involved in the creation or maintenance of the monitored power system
• This is a complete modeling course for SCADA-only systems, but is also useful for other e-terraplatform customers who need to utilize SCADA data in other applications
design
installatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will understand the Alstom
Grid SCADA applications functionality for processing both telemetered and calculated data
• Students will recognize fi eld and record names in the SCADA database necessary for creating graphic objects that accurately represent the state of monitored objects
• Participants will learn the processing of controls for analogs and status points
• Students will create calculated data points and understand SCADA topology processing
• Students will share data via ISD with other systems
• Students will learn how to use the SCADA Online Editor
objectives• Give an overview of the Supervisory
control and Data acquisition (SCADA) functionality provided by Alstom Grid Energy Management System (EMS) host systems
• Teach how SCADA measurements are processed and stored, and how controls and SCADA alarms are issued in a monitored power system
• Explain the SCADA data model and how to use the e-terramodeler tool to populate that model
• Use e-terramodeler to develop a SCADA Model to obtain the desired SCADA behavior on your system
• Cover the SCADA online editor’s capabilities and limitations
course Topics • SCADA system functions and database
organization• Status, analog, and pulse accumulator
measurement processing and storage• Processing of controls for analogs
and status points• SCADA topology processing• Creating calculated data points• Recording SCADA data for replay
and analysis• SCADA system interaction with ALARM
(and its various confi guration options)• Sharing data with other systems via
Intersite Data (ISD) using the SCADA online editor
Building a scADA modelEmsp004
156 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Emsp002EmsP018Emsp017Emsp012Emsp004
Emsp003 30% practical70% theoretical
• System integrators, power system engineers involved in the creation and maintenance of the network topology model
design
installatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to describe
the Alstom Grid network data structure and energy management functions that rely upon it
• Students will have knowledge of the breadth of optional processing and display options available in the Alstom Grid network subsystem, and be able to identify which e-terramodeler views, folders, forms, and tabs are used to populate and examine the network database
objectives• Give an overview of the network
analysis functionality to create and maintain a model that best represents your system using the modeling tool, e-terramodeler
• Explain how to use modeler• Differentiate which transmission
details are necessary in the model for evaluating the health of the transmission system
• Explain the network data model, and how to use e-terramodelerto populate it
course Topics • Network system functions and
database organization• Transmission lines, switching devices
and transmission levels (equipment groups)
• Transformers, capacitors, and reactors• Demand loads, load areas and
auxiliary loads
Building a Network modelEmsp003
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 157
Contact us
price
Contact us
Dates & Place
2 days
Emsp024 Emsp002 30% practical70% theoretical
EMsp012 Emsp017 Emsp018 Emsp003
• System integrators, power system modelers, and Generation engineers involved in the creation or maintenance of the generation control system model. This course is critical for GenCo customers
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will understand Alstom Grid
Generation software processes and their general algorithms for processing and presenting AGC and ACE data
• Students will gain knowledge of optional processing options for generating units modeled in an Alstom Grid Generation subsystem
• Students will identify which e-terramodeler views, folders, forms, and tabs are used to populate and examine the Generation database
Building a Generation ModelEmsp002
objectives• Give an overview of the Generation
application functionality provided by Alstom Grid systems
• Show how to use e-terramodeler’s modeling tool to confi gure the desired generation behavior on your system
• Explain real-time AGC and ACE processing algorithms and how to model jointly-owned and combined-cycle generating units
• Explain how to view a Generation data model and how to use e-terramodeler to populate it
course Topics • Generation application confi guration
options and alarm settings
• AGC status, Area Control Error, and contributing settings
• Relationship between generating units and unit controllers
• Generating unit data: limits, gross/net MW conversion, and ramp rate
• Generating unit data: forbidden zones, types and fuels
• Incremental heat rate curves, emissions data, and auto selection
• Jointly owned and combined cycle unit models
• Real-time market interfaces• Interconnection tie lines, and dynamic
schedules• Joint AGC Regulation schedules• Mapping data between SCADA and
AGC• Reserve Monitoring Defi nition
158 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
1 day
Emsp016 Emsp008
EMsp004 Emsp034 Emsp012 Emsp017 Emsp018
Emsp024 20% practical80% theoretical
• System integrators, power system modelers, and SCADA engineers involved in creating or maintaining the model of the monitored power system and especially the Dispatcher Training Simulator
design
installatiOn
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to defi ne
appropriate information in the DTS model
Customer Benefi ts
objectives• Introduce the features and processes
associated to Dispatcher Training Simulator model defi nition
course Topics • Training Simulator Overview• Models for Prime Movers• Models for Relays
Building a DTs modelEmsp024
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 159
Contact us
price
Contact us
Dates & Place
1 day
Emsp025 100% practical
Emsp004 Emsp034 Emsp012 Emsp017 Emsp018
• System integrators, power system modelers, and SCADA engineers involved in creating or maintaining the model of the monitored power system
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will have gained suffi cient
modeling experience to start effi ciently modeling their own Power System data
objectives• Experience the process of modeling
a complete Substation • Summarize the skills and the
experiences acquired in the previous modeling courses by inserting a simple, but realistic, substation, starting from a paper equipment description and station on-line diagram
• Review the procedure and requirements for modeling the most common power system equipment in the different EMP subsystems
course Topics • Review of station equipment and
measurement modeling• Review of navigation and database
population methods: equipment creation v/s copying
• Connectivity defi nition• Database validation: understand
and correct the validation messages to obtain valid databases
• Power System Data consistency check: power fl ow calculation for the modifi ed data set
• Database on-lining procedure: put the new data online in e-terrasimulator and understand the results of modeling choices
Building a substationEmsp025
160 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
Emsp016 60% practical40% theoretical
Emsp024 Emsp017
• Instructors of the e-terrasimulator and system administrators who are supporting the e-terrasimulator software
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to initialize the
e-terrasimulator database, set up training scenarios, and initiate, monitor, and manage a training session
• Students will receive 24 NERCCEH hours for attending this course
objectives• Show how to use Alstom Grid
e-terrasimulator to set up a training environment that allows dispatchers to practice performing SCADA, RTGEN, RTNET and Alarm operations
• Teach dispatcher trainee and instructor functions and capabilities
course Topics • Basic e-terrasimulator functions• e-terrasimulator applications and
databases• Management of the e-terrasimulator
in simulation and replays modes• Creating and validating an event
scenario• One-step initialization from real-time
system• Starting, controlling, and stopping
the e-terrasimulator• Interaction with the trainee• Roles of the dispatcher trainee
and instructor
e-terrasimulator InstructorEmsp016
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 161
Contact us
price
Contact us
Dates & Place
2 days
Emsp021Emsp020 75% practical25% theoretical
Students should be familiar with power system concepts and their console equipment. Familiarity with e-terrahabitat is not assumed, but desired. Some knowledge of clones and database structure would also be helpful
• Utility personnel who will use Alstom Grid network applications to perform network analysis and evaluate solution quality
design
installatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will gain a general
understanding of the Alstom Grid network applications and how they can be used to assess load demand, interchange requirements, generation, network connectivity, and limit violations in both the current and contingent network states
• Students will troubleshoot solution anomalies
• Students will navigate through the various network applications displays
objectives• Introduce the network applications
required to perform basic network analysis
course Topics • Network Analysis Displays and
Navigation: describes the user interface for the network applications
• Real-time Network Analysis (RTNET): discusses the state estimator parameters and processing logic
• Obtaining a State Solution with RTNET: discusses the state estimator solution and result evaluation
• Study Network Analysis (PWRFLOW/STNET): discusses the setup and parameters for the study applications
• Obtaining a PWRFLOW Solution in STNET and other STNET Functions: discusses the powerfl ow solution and result evaluation, case comparison, and export control
• Contingency Defi nition: discusses contingency defi nition modeling
• Contingency Analysis: discusses contingency parameters, execution, and solution evaluation
• Network Schedules, Limits, Monitored Elements, and Alarming: discusses various modeling data
• Outage Scheduler: brief description of the Outage Scheduler function
Network AnalysisEmsp020
162 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
1 day
Emsp030Emsp020 Emsp021 70% practical30% theoretical
• Utility personnel who will use network optimization applications to perform network analysis
design
installatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students learn how Alstom Grid
optimization network applications can be used for analysis of both the current network state and contingent network states
objectives• Explain how Alstom Grid optimization
network applications can be used for analysis of both the current network state and contingent network states
course Topics • Control defi nition• User interface of the optimization
network applications• Specifying network components to be
enforced for limit violations• Use of Optimal Power Flow (OPF)• Use of Security Enhancement• The role of real-time Security
Enhancement and Voltage VAR Dispatch (VVD) in the real-time Network Sequence
• The role of OPF in the Study Network (STNET)
Network optimizationEmsp021
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 163
Contact us
price
5 days
Emsp036 40% practical60% theoretical
Students should be familiar with power system concepts, e-terrahabitat and the e-terrahabitat desktop
• Utility personnel who will use Alstom Grid network applications to perform network analysis
• This course should be taken before any customer-written extensions to the system take place
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students learn how network applications
can be used to assess load demand, interchange requirements, current generation, network connectivity and limit violations for both the current network state and contingent network states
objectives• Introduce to the network applications
required to perform basic network analysis on both Transmission and Distribution networks
• Adjust to functional interest (essentially modular in an application basis)
course Topics • User interface of the network
applications• Use of Powerfl ow (PWRFLOW), State
Estimation (RTNET), Contingency• Analysis (CA) & contingency defi nition• Use of Contingency Analysis including
contingency defi nition• Use of Short Circuit (SCT), fault
defi nition• Use of Volt/VAR Dispatch (VVD)• Control defi nition, constraint
enforcement• Use of Optimal Power Flow (OPF)• Use of Security Enhancement (SENH)• The role of real-time Security
Enhancement in the real-time Network• Sequence
Network Application FeaturesEmsp036
164 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
3 days
Emsp029Emsp030 40% practical60% theoretical
Emsp021 Students should be familiar with power system concepts, e-terrahabitat and the e-terraplatform desktop
• Personnel who will use Alstom Grid generation applications to monitor and control the generation system
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students learn how to use the
generation control application (RTGEN) for its basic function (automatic generation control = AGC) and associated auxiliary functions (economic dispatch, reserve monitoring…)
• The course also introduces the various scheduling functions and the generation study applications
objectives• Introduce e-terraplatform generation
applications, to monitor and control the generation system
• Explain concepts of area control, frequency regulation and interchange control
• Describe the various functions of the RTGEN application used for this purpose, together with the various parameters available to the user to infl uence the control
• Present the study generation application (STGEN)
course Topics • Area control concepts (area control
error, AGC status and modes)• Parameters characterizing the entities
involved in area control (units, plant controllers, control areas)
• Unit scheduling facilities (base points, durations, fuel mixes), fuel cost schedules
• Interchange transactions scheduling• Reserve concepts, reserve requirements
scheduling, reserve monitoring• Economic dispatch (cost function
elements, units control modes)• User interface of the generation
applications and the generation common utilities
Generation Application FeaturesEmsp030
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 165
Contact us
price
2 days
Emsp028 Emsp029 60% practical40% theoretical
Emsp030 Students should have a thorough understanding of e-terraProgramming skills are not required but, the ability to use a text editor would be useful
• Engineers involved in forecasting and generation scheduling system
design
installatiOn
OperatiOn
maintenance
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will understand the essential
concepts and requirements for operating an e-terraloadforecast application
• They will learn how to defi ne a Model and how to use the results on the online Load Forecasting
objectives• Introduce the e-terraloadforecast
application that provides forecast for system load
course Topics • Short term forecasting• Defi ning the Load forecast model• Performing Load forecast
e-terraloadforecastEmsp029
166 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
Emsp029Emsp028 70% practical30% theoretical
Emsp029 Students should have a thorough understanding of e-terrahabitat and e-terraplatform
• Engineers who will be in charge of the schedule of generation requirements
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will learn how to use RSC
through several case studies
objectives• Teach how to schedule Hydro units• Teach how to schedule Thermal units• Teach how to evaluate interchange
transactions
course Topics • Initialization of e-terracommit from
real-time• Modifi cation and editing inputs (data)• Economic dispatching• Running of a Unit Commitment• Running of a Hydro thermal
Coordination• Evaluation of transactions• Review of e-terracommit results• Writing the results back to real-time
e-terracommitEmsp028
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 167
Contact us
price
Contact us
Dates & Place
2 days
Emsp028 Emsp017
Emsp049 30% practical70% theoretical
• Transmission reliability coordinators, transmission operators, dispatchers, and market operators who use e-terravision to monitor wide areas systems, detect abnormal situations and improve situational awareness
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to understand how
e-terravision works and the interactions with e-terrahabitat system
• Students will install e-terravision as a situational awareness tool
• Students will build overview and regional schematic displays using e-terravision authoring tool
objectives• Be able to use e-terravision to monitor
wide areas systems, detect abnormal situations, and improve situational awareness
course Topics • Situation Awareness• Components of e-terravision• e-terravision server• e-terravision viewer• e-terravision Authoring Tool• Overview displays• Regional overview displays• Voltage Contours• Animations of MW and MVAR• Limit Violations• Preventive Contingency Analysis• Dashboard Panel
e-terravisionEmsp049
168 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Emsp007 50% practical50% theoretical
Familiarity with Oracle, MicrosoftSQL and RDBMS
• System personnel who are responsible for installing, confi guring and supporting e-terraarchive
design
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, students
will understand the functionality and components of e-terraarchive
• Students will be able to confi gure the product and create recording defi nitions to perform different types of transfers from e-terrahabitat to Oracle or Microsoft SQL
objectives• Describe the functionality provided
by e-terraarchive • Explain how to confi gure and manage
the product
course Topics • e-terraarchive components• Installation and confi guration• Creating recording defi nitions• Oracle or Microsoft SQL data
management• Data analysis web forms
e-terraarchiveEmsp007
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 169
Contact us
price
Contact us
Dates & Place
2 days
Emsp014 20% practical80% theoretical
Experience working with an e-terraplatform 2.x systemStudents are expected to have some level of experience (and/or training) with e-terrahabitat and e-terraplatform concepts and tools
• All users who share responsibility for the development, maintenance, operation, and management of an e-terraplatform 2.x based system who want to upgrade to e-terraplatform 2.y
design
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will have an understanding
of the changes to e-terraplatform and e-terrahabitat and why those changes were made
• Students will know how to use the updated e-terrabrowser user interface including the ability to use a single interface querying multiple servers, and the new Permit Server (PERMSRV)
• Students are introduced to new tools for license metering, database resizing, system builds and code management
• Students will cover the SCADA applications, including a full discussion on the new Front End Processors
e-terraplatform 2.x – 2.y Delta courseEmsp014
objectives• Explain the platform differences
between e-terraplatform 2.x and e-terraplatform 2.y from an integration and operation perspective
• Introduce the concepts along with demonstrations and/or hands-on labs
course Topics • e-terrabrowser confi guration
and usage• General user interface enhancements• Migration issues for displays used for
Rapport-FG• User-based and station-based
authentication and authorization• e-terracontrol front-end processors
and seamless navigation• The SCADA Online Database Editor• Scanner/Control/Alarm enhancements• Code management and system build
tools• Security enhancements• New operating systems
170 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Emsp042 90% practical10% theoretical
First level practical knowledge of the e-terrahabitat, e-terraplatform, e-terracontrol and e-terramodeler environment is recommended
• System integrators, data modelers and data communication specialists who want to extend their understanding about how things are globally established to make an e-terrascada system work properly connected with fi eld data
design
OperatiOn
maintenance
management
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will have a fi rst level practical
understanding about the SCADA hardware and software integration process
• Students will have a fi rst level practical understanding of the full data integration process in an e-terraplatform system
• Students will have a fi rst level practical exposure to the integration of the Data communication front end witha C264 RTU
objectives• Offer a full practical insight into the
physical and logical chain that ties together the fi eld equipment and the EMS system
• Explain step by step how new substation equipment can be made visible at the e-terrascada level
• Make students practice establishing a connection between an e-terrascada system to a C264 RTU using IEC 60870-5-1001 protocol
course Topics • Substation Data Communication
Modeling• Data Integration in SCADA Real
Time system• Front-end Infrastructure: Architecture
– Modeling – Integration – Operation and MaintenanceC264 RTU Infrastructure: Architecture – Modeling – Integration Operation and Maintenance
• System Operation, Maintenance and Troubleshooting
Note:The aim of this workshop is not to give full details on all of the hardware, software and processes involved in the data communication infrastructure, but, instead, give a synthetic technical realistic practical overview about this important part of the EMS. In no way does information taught in this workshop replace that of the courses on e-terra technology.
Full Network system from Field to scADAEmsp042
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 171
Contact us
price
Contact us
Dates & Place
2 days
Emsp040 70% practical30% theoretical
Emsp017 Emsp026 Introduction to e-terrahabitatDatabase Building with DBB
• Developers, engineers and administrators who will perform database and system modeling, display building, and data management
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to understand
concepts about using and managing the Graphical Modeling environment
• Students will be able to use the Graphical Modeler to generate DMS data and displays
objectives• Explain the basic procedures
for installing, confi guring and using Alstom Grid’s Graphical Modeler, in order to generate DMS data and displays in DBB and e-terrabrowser DDL format
course Topics • DMS Modeling Overview• Graphical Modeler Concepts• Installing the Graphical Modeler• Using the Graphical Modeler• Managing the Graphical Modeler• Defi ning Masters• Creating the FG templates• Miscellaneous & troubleshooting
Using Alstom Grid’s Graphical modelerEmsp040
172 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
1 day
Emsp032 50% theoretical50% practical
Students should have a basic understanding about what is a relational database and SQL language
• e-terraarchive end-users who need to create and produce reports using iGRID
OperatiOn
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Capacity to create reports using iGRID,
and to view them in the e-terrabrowser environment
objectives• Learn how to create and produce
iGRID reports using iGRID• Understand reports from Oracle
repository, MSSQL database or e-terrahabitat database
course Topics • Overview• Data access• Report formatting• Charts• e-terrabrowser iGRID plug-in
iGRIDEmsp032
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 173
Contact us
price
Contact us
Dates & Place
3 days
Emsp027 Emsp026 100% practical
• Engineers who use DBB to build and maintain the databases that support SCADA, NETWORK, GENERATION subsystem applications
design
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will understand the features
of the DBB tool, and will be able to populate the main databases
objectives• Teach how to enter data in the EMS/
DMS model• Teach the step by step approach using
the standard forms guidelines, data requirements, data checks and transfer to the real-time system
course Topics • Creating new Bay Types• Creating Bays and Devices• Entering Bay and Device parameters• Exporting data to the modeling
repository• Validating Database
Database Building with DBBEmsp026
174 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
customized
Emsp053 100% theoretical
Basic knowledge of computer science
• Personnel in charge of system operation or maintenance (System maintenance engineers) and for those responsible for engineering and design (SCADA engineers)
OperatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, students
will have a clear picture of what protocol is and the tools to detect that impact an EMS
objectives• Understand communications protocol• Use tools for debugging• Know input/ouput signals diagnosis
course Topics • What is the protocol• Overview of protocol applied
to EMS (IEC 101…)• Frame analysis presentation• Frame capture and analysis
(theory+practice)• How to detect defects in frames• First diagnosis/analysis applied
to EMS
protocol AnalysisEmsp053
NEw
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 175
Contact us
price
5 days
Emsp054 100% theoretical
Background in e-terra SCADA system
• Dispatchers, Statistics Service, forecast engineersOperatiOn
maintenance
management
Contact us
Dates & Place
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Trainees will be able to choose the
best method according to their needs of analyzing historical data
objectives• Give an exhaustive view of the different
methods for exploiting historical data
course Topics • SCADA Historical Data Recording
function (HDR)• Trending SCADA historical data• e-terraarchive overview• e-terraarchive data analysis (online
data and reconstructed data)
historical Data managementEmsp054
NEw
176 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
7 days
Emsp055 100% theoretical
Basic knowledge of the main EMS sub-systemsBackground in e-terrahabitat system and EMS databases
• EMS maintenance engineers
• Developers and engineers involved with creating and/or maintaining database and performing system modeling
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, students
will be able to fully use the database and display building tolls to make maintenance faster and more effi cient
objectives• Update database and displays• Familiarize with power systems
and SCADA modeling• Use database and display version
management and displays• Explain DB and displays on-lining
course Topics • Overview of the modeling environment
and procedures• Introduction to database modeling
software (Genesys, DBB, Graphical Modeler)
• Introduction to display building tool
• Database and displays version management and archiving
• Database and display on-lining• SCADA on-line modifi cation• Power system modeling practice:
Building a substation
Ems Database and Display maintenanceEmsp055
NEw
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Globa l Tra in ing Offer I 177
Contact us
price
Contact us
Dates & Place
1 day
Dmsp002 Dmsp003 Dmsp005
Dmsp001 100% theoretical
Knowledge of distribution network operationsWorking knowledge of Microsoft Windows
• Systems integrators, power system modelers and engineers involved in the creation or maintenance of the e-terradistribution systems
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will gain an overall
introductory understanding of e-terradistribution functionality
• Students will be able to describethe components that make up an e-terradistribution system
objectives• Provide an overview of the Alstom Grid
e-terradistribution product, including philosophy of development and integration into the customer system
• Explain general usage
course Topics • e-terradistribution model
and application architecture• Model maintenance (dynamic
and static data) basics• Integration with SCADA• ISD communication with SCADA• External interfaces• What software runs where
(client and servers)• Functional overview• LAB: System startup, basic operations,
checking system health
NEw
Introduction to e-terradistributionDmsp001
178 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt stepdesign
installatiOn
OperatiOn
maintenance
management
Contact us
price
Contact us
Dates & Place
1 or 2 days
Dmsp004 Dmsp006Dmsp007Dmsp011
Dmsp003 20% practical80% theoretical
Dmsp001 Knowledge of Distribution Network Operations
• System integrators, power system modelers, and distribution engineers involved in the creation or maintenance of the distribution control system model
• Course critical for DistCo engineers
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to describe
the Alstom Grid e-terradistribution architecture
• Students will become familiar with the basic operation of an e-terradistribution system
• Students will be able to perform basic troubleshooting of an e-terradistribution system
objectives• Provide an introductory understanding
of the e-terradistribution architecture and functionality provided by Alstom Grid systems
• Explain the basic processes for the routine operation and maintenance of an e-terradistribution system
course Topics • e-terradistribution model
and application architecture• Model maintenance (dynamic
and static data)• Integration with SCADA• External interfaces• What software runs where
(client and server)• Functional overview• System startup and failover• System tools and system monitoring• Basic troubleshooting• First response client support• LAB: System startup, basic operations,
checking system health
NEw
Introduction to e-terradistribution architectureDmsp003
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 179
Contact us
price
Contact us
Dates & Place
4 days
Dmsp005 Dmsp006Dmsp012
Dmsp004 60% practical40% theoretical
Dmsp003 Knowledge of distribution network and network analysis concept
• Systems integrators, power system modelers and engineers involvedin the creation or maintenance of the e-terradistribution systems
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to import
substation data into the e-terradistribution and understand the schema structure of the Distribution Network Operations Model (DNOM)
objectives• Provide a brief overview of the
object-oriented database and its basic use in the e-terradistribution
course Topics • Overview of the Distribution Network
Object Model (DNOM)• Data extraction from the utility’s asset
database or geographic information system (GIS)
• Understanding binary station model fi les (.mod)
• Model updates in real-time
Dmsp004e-terradistribution Databases
NEw
180 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
Dmsp008Dmsp010
Dmsp00680% practical20% theoretical
Dmsp003 Knowledge of Distribution Network Operations
• System integrators, power system modelers and engineers involvedin the creation or maintenance of the e-terradistribution systems
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to install, confi gure
and setup an e-terradistribution system• Students will be able to troubleshoot,
support and maintain the running of the e-terradistribution system
objectives• Explain the installation, set-up,
confi guration and maintenance of the e-terradistribution system
• Explain how to build, confi gure and deploy a dual-redundant e-terradistribution (electronic mapboard) environment
course Topics • Discuss software installation overview• Install and confi gure the real-time
e-terradistribution server• Install the File Manager Utility Server• Integrate with the scada system• Identify the external interfaces• Install the client software• Confi gure the e-terradistribution
User Interface (UI)• Install a study environment• Understand system build deployment• Defi ne various e-terradistribution
models• Identify security settings and
considerations• Examine troubleshooting• LAB: Build, confi gure and deploy
a dual-redundant DMS (electronic mapboard) environment
e-terradistribution system management
NEwDmsp006
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 181
Contact us
price
Contact us
Dates & Place
2 days
Dmsp009 Dmsp007 50% practical50% theoretical
Dmsp003 Dmsp005 Knowledge of Distribution Network Operations
• System integrators, power system modelers and engineers involved in the creation or maintenance of the e-terradistribution displays
design
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to maintain and
update the e-terradistribution Model Management
• Students will be able to update station model fi les as part of the model management processes and procedures
objectives• Teach how to administer and operate
the e-terradistribution Model Management Environment
• Assist core members of the customer team in developing and integrating into current procedures e-terradistribution model management processes and procedures, with the end goal of development of a class for end-users to learn these specifi c processes and procedures
course Topics • Validate Converter operation and error
messages• Processing a Unit of Work• Understand the validation processes• Describe the auto-process of stations• Review transaction summary
e-terradistribution model managementDmsp007
NEw
182 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
2 days
Dmsp011Dmsp010 80% practical20% theoretical
Advanced Applications Architecture and Overviews
• Train-the-trainer and simulation instructors involved in the training of e-terradistribution system and users
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to navigate
and fi nd devices and stations within one-line and tabular displays
• Students will be able to perform day-to-day operations, including tracing, switching and temporary modifi cations on the e-terradistribution system
objectives• Teach how to use the
e-terradistribution software components and User Interface to navigate through the e-terradistribution system
• Train dispatchers and operators in both day-to-day routine and emergency operations in a real-time environment
course Topics • Describe User interface layout
and symbology• Describe the Model management
from a user perspective• Navigate to e-terradistribution
and scada displays and tabular displays• Identify e-terradistribution display tools
(geographic, geo-schematic, one-lines)• Find devices and distribution stations• Use Switching and tagging operations• Turn on Tracing• Create Temporary modifi cations
e-terradistribution Operator Training
NEwDmsp010
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 183
Contact us
price
Contact us
Dates & Place
10 days
TEL003 65% practical35% theoretical
Basic knowledge of Telephone EquipmentHandle common operating systems on PC
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course, students
will know the principles of operation, the different network interfaces, the standard network facilities supported, the most common alarm designations, and how to make common preventive actions
• They will be able to describe and identify the main components and their function, to insure basic operations, to extend the PABX capacity, to fi nd all necessary information related to an alarm, and to identify an alarm source
objectives• Understand the PABX PCX system in
the customer network, to handle all common installation and programming procedures with a clear knowledge of the signal fl ow, the number analysis, the network protocols and the facilities to prepare the maintenance operations
course Topics Theory• Environment• Internal architecture• Capacity• Number Analysis• Local restrictions• Facilities• Interfaces• DII and NDDI• Routing• Analog trunks
• Synchronization• Digital Trunks• Overfl ow• Network Facilities and Restrictions• Operator Consoles• Network Management• Restoring a communication link and
a Database• Replacing a Board• Alarms sources• Remote connection• Upgrade• SecurityPractice• Software installation• Hardware implementation• Local tests• Software installation• Connection to another 4400• Network tests• Database Management• Simulation of various failures• Remote Management (VT100 & A4760)• System restoration
ALcATEL pABX pcX 4400TEL003
184 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
TEL005 80% practical20% theoretical
Good knowledge of Telecommunications equipment
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will get a clear
understanding of the connection between transmission equipment and SCADA/RTU systems
• They will be able to measure the impact of telecommunications failure on the data acquisition chain
objectives• Get a clear understanding of
the interconnection aspects between transmission equipment and SCADA/RTU systems
• Be able to measure the impact telecommunication failures have on the data acquisition chain
course Topics Theory• Review of the PDH/SDH layers
equipment• Recurrent diffi culties• Network routing• Services review
• Remote management• Network Synchronization• Network Protections• What is SCADA?• What is a RTU?Practice• Software installation• Hardware implementation• Cabling• Local & Network tests• Software installation• Hardware implementation• Backup/Restore steps• Network building• Services trough the network• Failure simulation• Automatic network protections• Connection to SCADA and RTU
Data Acquisition through the Telecommunications Network
TEL005
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 185
Contact us
price
Contact us
Dates & Place
5 days
TEL006 60% practical40% theoretical
Basic knowledge on PDH, SDH and Optic techniquesHandle common operating systems on PC
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will know the principles of
operations, the commissioning steps, the most common alarms, and the relation with hardware
• They will be able to describe and identify the main components and their functions, to ensure the maintenance, to understand alarms correlation and to identify sensitive points of the network
• This 5 day program can also besplit into 3 sessions of 2 days according to the trainee’s needs
objectives• Understand the AREVA SDH MSE
transmission systems in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow
• Be able to prepare the maintenance operations
course Topics Theory• Rack, subrack and board description• Power• Equipment Starting• Software installation• Network Management System• The Craft Terminal• Synchronization
• Protection• Hardware declaration• Redundancy• Traffi c management• EOW• Upgrade• Backup and restoration• Unit replacement• Performance monitoring• Security• Indicators reading• Alarms description• Automatic Laser shutdownPractice• Software installation• Hardware implementation• Cabling• Network interconnection• Functional tests and measurement• Failure simulations• Troubleshooting from a NMS• Loops
AREVA sDh msE 5xxxTEL006
186 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
TEL007 50% practical50% theoretical
Digital Modulation Voice Compression ADPCM & VocoderKnowledge of PLC systemsRead technical manuals
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will know the principles
of operation, installation and commissioning procedures
• Students will be able to ensure smooth maintenance and common troubleshooting analysis
• This 5 day program can also besplit into 3 sessions of 2 days according to the trainee’s needs
• Testing and commissioning• PC confi guration tools• Equipment maintenance and
troubleshooting• Relation between medium quality
and confi guration choice• Soft keys choices• SNMP confi gurations• Teleprotection connections• Medium evaluationPractice• Software installation• Hardware implementation• Cabling• Confi guration• Commissioning• Local & Network tests• Network interconnection• Functional tests and measurement• Failure simulations• Troubleshooting from a remote site• Loops• Communication failure• Circuits (data, speech, V11,
Maintenance handset) confi guration
objectives• Understand the AREVA PLC5000
transmission system in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow
• Be able to prepare maintenance operations
course Topics Theory• Functionality of the equipment• Integration of the PLC5000
telecommunications network related to an energy transmission grid
• Principles of operation• Detailed analysis starting from the
Block Diagrams• Installation• Hardware and software confi guration
AREVA pLc5000TEL007
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 187
Contact us
price
Contact us
Dates & Place
5 days
TEL009 65% practical35% theoretical
Basic knowledge of PDH and Optic techniquesHandle common operating systems on PC Ethernet networking knowledge is recommended
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will know the principles
of operation, the commissioning steps, the most common alarms, the relation with hardware
• They will be able to describe and identify the main components and their function
• They will be able to ensure the maintenance, to understand alarms correlation and to identify sensitive points
• This 5 day program can also besplit into 3 sessions of 2 days according to the trainee’s needs
Customer Benefi ts
objectives• Understand the AREVA PDH DXC5000
transmission system in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow
• Be able to prepare maintenance operations
course Topics Theory• Rack, subrack and board description• Man machine interface handling• Equipment Starting• Circuit implementation• Interface declaration• Software installation• Power• Hardware declaration• Synchronization aspects
• Redundancy• Network Management• Upgrade• Backup and restoration• Unit replacement• Performance monitoring• IP networking Security• Indicator reading• Housekeeping• Alarm description• Automatic Laser shutdownPractice• Network Management installation• Management tools connection• Software installation • Hardware implementation• Cabling • Local & Network tests• Network interconnection• Functional tests and measurement• Failure simulations• Troubleshooting from a remote site• Loops • Communication failure
AREVA pDh DXc5000TEL009
188 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
5 days
TEL010 50% practical50% theoretical
Basic knowledge in the different types of modulation, voice compression ADPCM & Vocoder and PLC technic
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Participants will be able to improve
the reliability of maintenance interventions and operations necessary to its Power Line Carrier network
• The plurality of the instructor’s skills and the proximity of our engineering allow participants to clarify any issues related to the network design building and its specifi cities
• This 5 day program can also besplit into 3 sessions of 2 days according to the trainee’s needs
objectives• Understand the AREVA MiCOM T390
transmission system in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow
• Be able to prepare maintenance operations
course Topics Theory• Specifi c functions• Integration in a telecommunications
network• Principle of operation• Detailed Block Diagrams analysis• Installation aspects• Hardware and software confi guration
• Testing and commissioning• PC confi guration tools• Equipment maintenance and
troubleshootingPractice• Software installation• Hardware implementation• Cabling• Confi guration• Commissioning• Local & link tests• Functional tests and measurement• Medium evaluation• Relation between quality
and confi guration• Soft keys choices• Tele-protection connections• Failure simulations• Troubleshooting from a remote site• Loops• Communication failure• Filter settings
AREVA micom T390TEL010
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 189
Contact us
price
Contact us
Dates & Place
2 days
TEL012 80% practical20% theoretical
Knowledge in protection philosophy
• Personnel in charge of operation or maintenance, engineers and designers responsible for the integration of this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will be able to ensure
maintenance and common troubleshooting analysis
AREVA DIp5000 Analog/DigitalTEL012
objectives• Understand the AREVA DIP5000
Analog/Digital systems in the customer network
course Topics Theory• Function of a Teleprotection
in a power transmission network• Detailed description of the different
functional blocks, which compose the equipment
• Description of the test and programming tool
• Practice with installation advises, programming and commissioning of a DIP5000 link
Practice• Installation• Confi guration• Testing and commissioning of a link
190 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
TEL022 100% theoretical
General knowledge in telecommunications
• Personnel with a minimum knowledgein telecommunications who want to improve their knowledge in the optical fi ber technology
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This course gives an overview
of the potentials of optical fi ber
objectives• Know and understand the benefi ts
and constraints of optical fi ber within a Transmission network
course Topics Theory• The optical fi ber• Transmission environment• Link Budget calculation• Network design• Optical fi ber for Power utilities• Measurement tools• Examples
optical Fiber within a Transmission networkTEL022
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 191
Contact us
price
Contact us
Dates & Place
7 days
TEL002 40% theoretical60% practical
Basic knowledge in PDH and Optic techniques Handle Common operating systems on PC
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will know the principles
of operation, the different network interfaces, the standard network facilities supported, the most common alarm designations, and how to make common preventive actions
ALcATEL pDh 1511BA and 1515cX-cTEL002
objectives• Understand the PDH 1511BA
and 1515CX-C transmission systems in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow and to prepare the maintenance operations
course Topics Theory• PDH refresh (protocol)• Rack, subrack and boards description• Power• Equipment Starting• Software installation• Hardware declaration• Man machine interface handling• Synchronization aspects• Circuit implementation• Protection
• Redundancy• Network management• Upgrade• Backup and restoration• Unit replacement• Performance monitoring• Spare parts• Security• Indicator reading• Housekeeping• Alarm description• Log fi lesPractice• Software installation• Hardware implementation• Cabling (for commissioning engineer)• Commissioning• Local & Network tests• Network interconnection• Functional tests and measurement• Failure simulations• Troubleshooting from a remote site• Loops• Communication failure
192 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
15 days
TEL004 35% theoretical65% practical
Basic knowledge on telephony Handle Common operating systems on PC
• Personnel in charge of operation or maintenance, or engineers or designers responsible for integrating this equipment in the telecommunications network
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will know the principles
of operation, the different network interfaces, the standard network facilities supported, the most common alarm designations, and the common preventing actions
• They will be able to describe and identify the main components and their functions, to ensure basic operations, to extend the PABX capacity, to fi nd all necessary information related to an alarm, and to identify an alarm source
objectives• Understand the private switching
system in the customer network• Be able to handle all common
installation and programming procedures with a clear knowledge of the signal fl ow, number analysis, network protocols and facilities
• Be able to prepare maintenance operations
course Topics Theory• Environment• Internal architecture• Capacity• Number Analysis• Local restrictions• Facilities• Interfaces• DII and NDD.I• Routing• Analog trunks• Synchronization
• Digital Trunks• Overfl ow• Network Facilities• Network Restrictions• Operator Consoles• Network Management• Restoring a communication link• Restoring a Database• Replacing a Board• Alarm causes• Remote connection• Upgrade• Security
practical work• Sys410 installation• Software installation• Hardware implementation• Cabling• Local tests• Connection to another Sopho• Connection to the PSTN• Network tests• Database Management• Simulation of various failures• Remote Management• System restoration
phILIps pABX sopho is3000TEL004
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 193
Contact us
price
Contact us
Dates & Place
3 days
TEL020 80% theoretical20% practical
General knowledge of digital signals
• Management and staff who will benefi t from knowledge of power systems in the electric energy domain
design
installatiOn
OperatiOn
maintenance
Customer Benefi ts
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• This course gives participants knowledge
on aspects of regulation, deregulation, trading, safety and environment of the electrical energy industry
objectives• Know and understand the principles
of the SDH network and its role within the power utility environment
• Give an overview of the electrical power network from its generation to its distribution (primary functions of power system components)
• Know principles involved in operation of interconnected power systems, economic considerations for interchanging power between systems, control methods and reliability considerations
course Topics Theory• The synchronous Digital Hierarchy • The multiplexer • Network and protection schemes • Synchonization • Examplespractical work• Presentation of a SDH Multiplexer
AREVA sDh NetworksTEL020
194 I Globa l Tra in ing Offer
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
Contact us
Dates & Place
3 days
TEL021 80% theoretical20% practical
General knowledge of digital signals
• Personnel with a minimum knowledge of telecommunications who want to understand the PDH standard and its environment
design
installatiOn
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer
Customer Benefi ts
objectives• Know and understand the principles
of the PDH Network and its role within the power utility environment
course Topics Theory• The Plesiochronous Digital Hierarchy• The multiplexer• Interfaces• Management• Network and protections schemes• Examplespractical work• Presentation of a PDH Multiplexer
AREVA pDh NetworksTEL021
prOfiles audience learning path duratiOn
prerequisites training neXt step
Globa l Tra in ing Offer I 195
Contact us
price
Contact us
Dates & Place
5 days
TEL023 60% theoretical40% practical
Basic knowledge in PDH and Optic techniques Handle Common operating systems on PC
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
design
installatiOn
OperatiOn
maintenance
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Students will know the principles
of operation, the different network interfaces, the standard network facilities supported, the most common alarm designations and how to make common preventive actions
• They will be able to describe and identify the main components and their functions, to insure basic operations, to extend the SDH capacity, to fi nd all necessary information related to an alarm, and to identify an alarm source
Customer Benefi ts
objectives• Understand the HUAWEI SDH 2500
transmission systems in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow and to prepare the maintenance operations
course Topics Theory• Rack, subrack and boards description• Power• Equipment Starting• Software installation• Man machine interface handling• Hardware declaration• Synchronization• Synchronization implementation• Protection• Traffi c & Overhead implementation• Redundancy
• Traffi c management• EOW• Connectors• Upgrade• Backup and restoration• Unit replacement• Performance monitoring• Spare parts• Security• Indicator reading• Housekeeping• Alarm description• Automatic Laser shutdown• Log fi lesPractice• Software installation• Hardware implementation• Cabling (for commissioning engineer)• Commissioning• Local & Network tests• Network interconnection• Functional tests and measurement• Communication failure• Troubleshooting from a remote site• Loops
hUAwEI sDh osNxxxxTEL023
196 I Globa l Tra in ing Offer
NEw
prOfiles audience learning path duratiOn
prerequisites training neXt step
Contact us
price
TEL027 40% theoretical60% practical
Knowledge in PDH/SDH and Optic techniques Handle common operating systems on PC
• Personnel in charge of operation or maintenance, engineers and designers responsible for integrating this equipment in telecommunications networks
installatiOn
OperatiOn
maintenance
Contact us
Customer Benefi ts
Dates & Place
• Possibility to do this training course on your own site and at your own convenience
• Exchanges with an experienced trainer• Upon completion of this course,
students will know the principles of operation, the commissioning steps, the most common alarms, the relation with hardware, and will be able to describe and identify the main components and their function, to ensure the maintenance, to understand alarm correlation and to identify sensitive points
objectives• Understand the Alstom Grid PDH/SDH
e-DXC transmission system in the customer network
• Be able to handle all common installation and programming procedures with a clear knowledge of the signal fl ow
• Be able to prepare maintenance operations
course Topics Theory• Rack and boards description• Man machine interface handling• Equipment Starting• Circuit implementation• Interfaces declaration• Software installation• Hardware declaration• Unit replacement• Synchronization implementation• Redundancy• Network Management
• Upgrade• Backup and restoration• Unit replacement• Performance monitoring• IP networking. • Security• Indicators reading• Alarms description• Housekeeping• Automatic Laser shutdown• Knowledge on PDH/SDH and Optic
techniques Handle common operatingpractical works• Network Management installation• Management tools connection• Software installation• Hardware implementation• Cabling• Local & Network tests• Network interconnection• Functional tests and measurement• Failure simulations• Troubleshooting from a remote site• Loops• Communication failure
AREVA e-DXcTEL027
Globa l Tra in ing Offer I 197
Additional programs − Available on demand
netWOrk management
emsp006 Fundamentals of Operator Tools
emsp031 e-terrapclink
emsp037 Overview of Power Systems Application Software
emsp027 EMS-DMS Data Model
emsp039 Crystal Report Generation
emsp043 Introduction to FDIR
emsp044 TCS Operation
emsp046 TCS-WO System Management
emsp048 WO Operation
emsp035 Introduction to Power System Principles
dmsp002 Distribution Electrical Asset Mode
dmsp005 Substation Editor
dmsp008 Distribution Operator Training Simulator (DOTS) Instructor
dmsp009 Modeling for Distribution Operator Training Simulator (DOTS)
dmsp011 e-terradistribution Network Analysis Function (DNAF)
dmsp012 e-terradistribution Historian
telecOm
tel008 AREVA PLC 1790
tel001 ALCATEL SDH 1650
tel011 AREVA LMU5000
tel024 AREVA GC305
tel025 AREVA TA314 Analog
tel026 AREVA TS313
The following training programs are available on demand. Please don’t hesitate to contact us.
WeB
198 I Globa l Tra in ing Offer
a ABREU & LIMA (Brazil), ADIA (France), ADIF − Administraciòn de Infraestructuras Ferroviarias (Spain), ADWEA (Abu-Dhabi), AEG (Germany), AEROSPATIALE, AES GENER (Chile), AIRPORTS of Cairo, AIRPORTS of Djibouti, AIRPORTS of Lyon, Paris, Pointe-à-Pitre, Phnom Penh, ALCAN, ALCOA (Spain), ALLEVARD ACIERS (France), ALSTOM Power (Spain), ALSTOM, AMYLUM, ANSALDO (Italy), APAVE (France), AQUITAINE (France), ARCELOR MITTAL (Brazil), AREVA NC (France), AREVA NP (France), ARKEMA (France), AVENTIS (France) B BOSCH (Chi le), BANQUE DE FRANCE (France), BHAWAN ENGINEERING (Oman), BHEL (India), BLACK & VEATCH (Thailand), BOLLORE TECHNOLOGIES (France), BP, BSN, BUREAU VERITAS CADAFE (Venezuela) c CALCIA CEMENTS (France), CEA (France), CEB (Benin), CEB (Sri Lanka), CEGEDEL (Luxembourg), CEGEDUR (France), CEGELEC, CELLULOSE DU PIN (France), CEMIG (Brazil), CENTRE D’ESSAIS DES LANDES (France), CENTROMIN (Peru), CERNAVODA (Romania), CESP (Brazil), CFE (Mexico), CGE (Chile), CHEVRON KOGC (Kuwait), CHILQUINTA (Chile), CIE BANCAIRE (France), CIE GÉNÉRALE DE CHAUFFE (France), CIE GÉNÉRALE DES EAUX (France), CIE RHENANE DE RAFFINAGE (France), CIMENT DU SAHEL (Senegal), CITÉ DES SCIENCES ET DE L’INDUSTRIE (France), CITROEN, CLEMESSY (France), CNR (France), CNTIC (China), CODELCO (Chile), COLBÚN (Chile), COMISION FEDERAL DE ELECTRIC MEXICO (Mexico), COMMUNAUTÉ URBAINE Strasbourg (France), COMURHEX (France), CONVERTEAM (France), COPEL (Brazil), COSTA SOL (Spain), COVITUR (Mexico), CPCU (France), CPFL (Brazil), CREUSOT LOIRE INDUSTRIE (France), CTCI (Taiwan) d DASSAULT (France), DCNS (France), DALKIA (France), DELHI INTERNATIONAL AIRPORT (India), DELPHI SYSTEMS (France), DEWA (Dubai), DGA (France), DOMAS (France), DRESSER-RAND (France), DUKE POWER (USA) e EAC (Cyprus), EAO (Russia), EBES (Belgium), EDELCA (Venezuela), EDELNOR/
ELECTROANDINA (Chile), EDF (France), EDHC (Egypt), EDL (Lebanon), EDP Norte (Portugal), EDT (Tahiti), EDUCATION NATIONALE (France), EEA (Egypt), EECI (Ivory Coast), EEKELS (Netherlands), EGAT (Thailand), EI (France), ELECTRABEL (Belgium), ELEKTRO TEHNA (Slovenia), ELETROBRÁS (Brazil), ELETRONORTE (Brazil), ELETROPAULO (Brazil), ELF (France), ELYO CENTRE (France), EMON (Romania), ENDESA (Italy), ENDESA (Spain), ENDESA DISTRIBUCIÓN (Spain), ENDESA GENERACIÓN (Spain), ENEL (Italia), ENEL VIESGO (Spain), ENELGUI (Guinea), ENERCAL (New Caledonia), ENPAS (Ukraine), EPHENAN (China), EPTE (Brazil), ERAMET (New Caledonia), ERDF (France), ERIDANIA BEGHIN SAY (France), ES Strasbourg (France), ESCOM (France), ESKOM (South Africa), ETDE (France), EURODIF (France), EUROLYSINE (France), EUROTUNNEL (France-UK), EVN (Viet Nam), EWA (Bahrain) f FEDA (Andorra), FEDERAL MOGUL (France), FIRESTONE (France), FLIPO RICHIR (France), FLUOR (Chile), FORCLUM (France), FORTUNA (Panama), FOSTER WHEELER, FOTRUM (Finland), FOURNIE GROSPAUD (France), FRANCE PRINTEMPS (France), FRANCE TELECOM (France), French Air Force, FRPC (Iran), FURNAS (Brazil) g GAME EURISYS (France), GARCZYNSKI & TRAPLOIR (France), GDF (France), GECAMINES (Belgium), GECOL (Libya), GEEP (Iraq), GEG Grenoble (France), GENERAL ELECTRIC, GÉNIE MILITAIRE (France), GERASUL (Brazil), GERLAND ROUTES (France), GETCO RACE COURSE VADODARA 23 (India), GIAT Industries (France), GIPCL (India), GM Powertrain (France), GMDC AHMEDABAD/AKHARAI MOTA BHUJ (India), GPS (China), GRANDE PAROISSE (France) h HARBOURS Lyon Marseille (France), HBCL (France), HBCM (France), HIMACHAL PRADESHSEB (India) HOSPITALS HVPNL (India) HYDRO GAS AND CHEMICALS (France), HYDRO QUÉBEC (Canada), HYUNDAI (South Korea) i IBERINCO (Spain), IBM (France), INDE (Guatemala), INVENSIL (France), ISA (Columbia), ITAIPU (Brazil)
cUsTomER REFERENcEs
Globa l Tra in ing Offer I 199
J JINDAL POWER NEW DELHI (India), JST TRANSFORMATEURS (France) k KEGOK (Kazakhstan), KENANA SUGAR (Sudan), KERALA SEB (India), KINDLE (China), KNHP (South Korea), KODAK (France) l L’AIR LIQUIDE (France), LA PLATA COGEN (Argentina), LA TABLABA (Argentina), LABORATOIRES PFIZER (France), LANGUEDOCIENNE MICRON COULEURS (France), LARSEN & TURBO (India), LEGRAND (France), LEROY SOMER (France), LES MUTUELLES DU MANS (France), LIGHT (Brazil), LYDGATE (USA) m MANGIN EGLY (France), MARINE NATIONALE (France), MEA (Thailand), MERALCO (Philippines), MESSIER-DOWTY (France), MEW (Bahrain), MEW (Kuwait), MHEW (Oman), MICHELIN, MINERIA ESCONDIDA (Chile), MINES DE POTASSES D’ALSACE (France), MITSUBISHI (Japan), MOTRACO (Mozambique), MWREP (China) n NALCO ORISSA (India), NATIONAL CONTRACTOR COMPANY (Kuwait), NEPA (Nigeria), NESTLE (Switzerland), NHPC − FARIDABAD NEW DEHLI (India), NONG KHAE COGEN (Thailand), NORELEC (France), NORGENER (Chile), NORISKO (France), NORSOLOR (France), NTPC (India), NYPA (USA)
O OIL INDIA DULIAJAN − ASAM (India), ONE (Morocco), OPATOVICE (Czech Republic) p PAPER MILLS, PEEGT (Syria), PEINTAMELEC (France), PEPSA (Peru), PERRIER (France), PETROBRAS (Brazil), PEUGEOT, PLN (Indonesia), POWER GRID (Singapore), POWERGRID INDIA (India), PPC ATHÈNES (Greece), PPL (USA), PSE (Poland) q QATAR POWER TRANSMISSION (Qatar), QTS4 (Qatar), QTS8 (Qatar), QUARTZ ET SILICE (France), r RATP (France), REE (Spain), RÉGIES D’ÉLECTRICITÉ (France), RELIANCE − RIL NEW BOMBAY (India), RENAULT, RENEL (Romania), RENFE/AVE (Spain), RHODIA, RHÔNE MÉRIEUX (France), RTE (France), RVI (France) s SAINT GOBAIN EMBALLAGE (France), SAM (France), SANOFI (France), SAQUENERGO (Georgia), SARDAR SAROVAR (India), SAUDI ELECTRICAL CO (Saudi Arabia), SAUNIER DUVAL (France), SAUR
(France), SBB ÉNERGIE (Switzerland), SCECO (Saudi Arabia), SCEP (China), SCLE (France), SECAUTO (France), SEDIVER (France), SEEG (Gabon), SEITHA (France), SELF SAPELEC (France), SEMT PIELSTICK (France), SEMVAT (France), SENELEC (Senegal), SEP (Netherlands), SEPR (France), SEVILLANA ELETRICIDAD (Spain), SEW (Sharjah), SH INTRDUSTRAIAL TECHNOLOGIES (Russia), SHANGHAI BELL (China), SHELL, SHEM (France), SIFT (France), SLMC (France), SNCF (France), SNCL (Luxembourg), SNE (Congo), SNE RIBANIER (France), SNECMA (France), SNEF (France), SNET (France), SNT (France), SOCOTEC (France), SOE (Iraq), SOFREGAZ (France), SOFRESID AQUITAINE (France), SOLMER (France), SOLVAY (France), SONABEL (Burkina Faso), SONATRACH (Algeria), SONEL (Cameroon), SONELEC (France), SONELGAZ (Algeria), SOTEB (France), SOVAB (France), SOYOUZ (Russia), SPE (Belgium), SPIE BATIGNOLLES (France), SPIE TRINDEL (France), SQUARELECTRIC (Monaco), STE VERMANDOISE INDUSTRIES (France), STEG (Tunisia), STNA (France), SUGAR MILLS, SYGMA (Taiwan)
t TANESCO (Tanzania, TAVANIR (Iran), TCL (France), TDF (France), TEDA (Thailand), TEMA NUCLÉAIRE (France), THALES (France), THOMSON CSF COOP (Egypt), TNB (Malaysia), TNEB CHENNAI (India), TOTAL (France), TP FERRO (Spain), TRACTEBEL (Belgium), TRANSALTA (Mexico), TRANSELEC (Chile), TRANSELECTRICA (Romania), TRANSGRID (Australia), TRAPIL (France), TRAVESSET (France), TSQ (China), TURBOTECNICA (Italy), TVO (Finland), TYIN HYDRO (Norway) u UCAR SNC (France), UEM Metz (France), UGINE (France), UNE (Cuba), UNIMETAL (France), UNION FENESA DISTRIBUCIÓN (Spain), UNION FENOSA GENERACIÓN (Spain), UTE (Uruguay) V VEOLIA, VERGER DELPORTE (France), VIANOVA RESINS (France) W WAPDA (Pakistan), WÄRTSILA SACM DIESEL (France), WEPCO (USA), WESTERN POWER (Australia)
z ZESA (Zimbabwe)…
global training offer
GRIDTechnical Institute
glob
al t
rain
ing
offe
r
GRID
-Ser
vice
-L3-
Trai
ning
s ca
t_20
09-1
775-
2010
_09
-EN
© -
Alst
om, t
he A
lstom
logo
and
any
alte
rnat
ive
vers
ion
ther
eof a
re tr
adem
arks
and
ser
vice
mar
ks o
f Alst
om. T
he o
ther
nam
es m
entio
ned,
regi
ster
ed o
r not
, are
the
prop
erty
of t
heir
resp
ectiv
e co
mpa
nies
. The
tech
nica
l and
oth
er d
ata
cont
aine
d in
this
docu
men
t are
pro
vide
d fo
r inf
orm
atio
n on
ly. N
eith
er A
lstom
, its
offi
cer
s no
r em
ploy
ees
acce
pt re
spon
sibili
ty fo
r or s
houl
d be
take
n as
mak
ing
any
repr
esen
tatio
n or
war
rant
y (w
heth
er e
xpre
ss o
r im
plie
d) a
s to
the
accu
racy
or c
ompl
eten
ess
of s
uch
data
or t
he a
chie
vem
ents
of a
ny p
roje
cted
per
form
ance
crit
eria
whe
re th
ese
are
indi
cate
d. N
o lia
bilit
y is
acce
pted
for a
ny re
lianc
e pl
aced
upo
n th
e in
form
atio
n co
ntai
ned
in
this
broc
hure
. Alst
om re
serv
es th
e rig
ht to
revi
se o
r cha
nge
thes
e da
ta a
t any
tim
e w
ithou
t fur
ther
not
ice. P
rinte
d on
pap
er m
ade
with
pur
e EC
F (E
lem
enta
l Chl
orin
e Fr
ee) e
colo
gica
l cel
lulo
se p
rodu
ced
from
tree
s gr
own
in p
rodu
ctio
n fo
rest
s un
der r
espo
nsib
le m
anag
emen
t, an
d se
lect
ed re
cycl
ed th
ree-
laye
r fibr
es.
Alstom Grid
Technical Institute
1 rue Paul Donner
73100 Aix-les-Bains
FRANCE
ALSTOM Grid Worldwide Contact Centre
www.grid.alstom.com/contactcentre
Tel: +44 (0) 1785 250 070
www.grid.alstom.com
alst
om g
rid t
echn
ical
inst
itute
indexpage
ACJ-C, ACJ-D, ACJ-M, ACJ-V (Load Tap Changer) 78APPS (Advanced Power Protection System) 49 à 55, 57, 58, 59ATEX 27, 28Automation (for substations) 98
B65 (HV Gas-Insulated Substation) 88B95 (HV Gas-Insulated Substation) 89B105 (HV Gas-Insulated Substation) 90B112 (HV Gas-Insulated Substation) 97B212 (HV Gas-Insulated Substation) 89Bwatch-3 (HV Gas-Insulated Substation monitoring) 92
C264 (MiCOM compact RTU) 125CAIS (Compact Air Insulated Substation) 93CBWatch-2 (HV breakers monitoring) 83Center-break (disconnecting switches type) 79CF4 (Gas recovery) 76Circuit-breakers (HV) 45, 68Competence management 16, 17Control Center 64, 65
Dead Tank HV Circuit Breakers 82Disconnecting switches - HV 79DMS (Data Management System) 175, 177 à 182DT (HV Dead Tank breakers) 82, 97
Earthing switches 79EC 842-2006 (Gas recovery) 74, 75
e-Learning 23, 33, 34, 35, 71, 72
EMS (Energy Management System) 35, 170, 197e-terra 134
F35 (HV Gas-Insulated Substation) 87, 97FK (Spring Operating Mecanism) 95FKG1 (Generator Circuit breakers) 46, 86, 97FKG2 (Generator Circuit breakers) 46, 85FX12, FX14, FX22, FX32 and FX42 (HV Circuit breakers) 97FXT15, FXT16, FXT17 (HV Circuit breakers) 97
Generator (Circuit breakers) 46, 85, 86, 97GFX (HV Circuit breakers) 97
GIS (Gas-Insulated Substations) 72, 87, 88, 89, 96, 97
GL Type (HV Circuit breakers) 80, 81Grid connection Protection 40
HGF 1xxx series (Dead tank HV Circuit breakers) 97HVDC 47HYpact (Compact outdoor substation) 93
IEC protocol 61850 122, 133IEC/TR 62271-303 standard (Gas recovery) 76Installation design 41Instrument Transformers 43, 44, 73
B
D
F
H
A
C
E
G
I
indexpage
LTC (Load Tap Changers) 78
MiCOM (digital protections) 98, 99MS 2000 (Transformer monitoring) 94MS 3000 (Transformer monitoring) 94
Multimedia 23, 33, 34, 35, 71, 72
OPN (Digital protective relays) 102
P14x (protections) 107PACiS (substation automation) 126, 127, 128, 129Pantograph (disconnecting switches type) 79Partial Discharges (Testing for HV Gas-Insulated Substation) 96PKG (Generator Circuit Breakers) 97Power Transmission 33Power transformers 42, 73, 77, 78, 97Protections (differential) 111, 114, 117Protections (distance) 110Protections (for Lines and Cables) 112Protections (for Motors) 108Protections (principles) 101Protections (for Railway applications) 113Protections (for Transformers) 114PS (Surge Arresters) 67PSCN 3020 (Substation automation) 131
Risk Prevention (Electrical and ATEX) 20, 21RPH2/RPH3 (Phase Synchronization for HV breakers) 84RTU (Substation calculator) 132
S1, S2 (HV hydraulic or pneumatic operated breakers) 97S10 (MiCOM software) 124Safety (Electrical and ATEX) 20, 21SCADA (Supervision) 67, 140, 155, 170SF6 (Gas recovery) 74, 75, 76Smart Grid 63SPACE 2000 (Network supervision) 130Spring Operating Mecanism 95Surge Arresters 67Switchgear (HV) 68, 69
T155 (HV Gas-Insulated Substation) 91Telecommunications 66, 134, 135Testing (for HV Gas-Insulated Substation) 96Transformers (Instrument transformers) 43, 44, 73Transformers (Power transformers) 42, 73, 77, 78, 97Transformers (on-line monitoring) 94TROPIC (Analogic protective relays) 102
VARISIL (Surge Arresters) 67Vertical-break (disconnecting switches type) 79
ZnO (Surge Arresters) 67
L
R
O
T
Z
M
S
P
V