1
Goat Tote - The Original
If you have a goat, sheep, dog, pig, chicken, dog, small sized miniature horse or
donkey, or any kind of small animal, this is the handiest piece of equipment you
can own. The regular size 5ft Goat Tote with cover weighs only about 80 pounds
and can be loaded easily, just slide it into your pickup.
To load animals into the Goat Tote, you can slide part of the front gate or you can
open the entire door. You can also purchase a Loading Chute to aid in loading
animals (see Loading Chute on Page 4).
ITEM # Weight ITEM DESCRIPTION Price
GTF5 75 Goat Tote Full size 5' long (47” wide x 40” tall x 5’ long) $349.00
GTS5 70 Goat Tote Compact 5' long (39” wide x 35” tall x 5’ long) $349.00
GTF6 90 Goat Tote Full size 6' long (47” wide x 40” tall x 6’ long) $399.00
GTS6 85 Goat Tote Compact 6' long (39” wide x 35” tall x 6’ long) $399.00
GTF8 110 Goat Tote Full size 8' long (47” wide x 40” tall x 8” long) $539.00
Goat Tote Dividers
Dividers can be added to your Goat Tote from side to side (as shown to the left). The side to side option will allow animals to be loaded in the back of the tote, then latched, then animals can be loaded in the front of the tote. With the front to back option(pictured below), animals can be loaded in the right side, then latched, then animal can be loaded in the left side.
Divider options include: Add a 'permanent' divider gate
for an additional $110.00 OR add a 'removable' divider
gate for an additional $135.00.
2
Pig Totes
The Pig Totes are built the same as the Goat Tote, but with 4 divided sections and 2
front doors. There are 4 compartments within the Pig Totes, however, the middle
gates can be left open to haul 2 pigs. All Pig Totes are 47” wide and made with 18
gauge galvanized pipe and 6 gauge galvanized wire mesh sides.
*5' Pig Tote has 4 compartments with each approximately 24"x 30", but with the
middle gates open the 2 compartments will be 24"x 60".
*6' Pig Tote has 4 compartments with each approximately 24"x 36", but with the
middle gates open the 2 compartments will be 24"x 72".
*8' Pig Tote has 4 compartments with each approximately 24"x 48", but with the
middle gates open the 2 compartments will be 24"x 94".
Add 'removable' option for inside divider gates for an additional $25.00, so that the tote can be used as a whole open
area once the dividers are removed.
ITEM # Weight ITEM DESCRIPTION Price
PT5 141 Pig Tote Full Size 5’ Long $539.00
PT6 163 Pig Tote Full Size 6’ Long $639.00
PT8 Pig Tote Full Size 8’ Long $799.00
Goat Tote/Pig Tote Covers
The white cover is made of a heavy duty vinyl/nylon. Now, all covers feature a clear vinyl window at the rear of your tote so your animals can be seen from your rear truck window. The sides can be rolled up or down depending on the weather. The cover can be attached to the tote using regular 'cable ties'. *Goat Tote Covers can be manufactured in the colors below for an additional fee of $35.00. *We do not provide personalization on covers.
Orange, tan, yellow, maroon, white, black, red, gray, green, blue, and brown.
ITEM # Weight ITEM DESCRIPTION Price
GTCV5 12 Custom Fit Cover 5’ long with rear window $150.00
GTCV6 14 Custom Fit Cover 6’ long with rear window $165.00
GTCV8 18 Custom Fit Cover 8’ long with rear window $195.00
PTCV5 12 Custom Fit Cover 5’ long with rear window $150.00
PTCV6 14 Custom Fit Cover 6’ long with rear window $165.00
PTCV8 18 Custom Fit Cover 8’ long with rear window $195.00
3
Metal Top Goat Tote
Just like The Original Goat Tote, but with a metal top. Helps to keep
your animals protected from the elements. A nice option for long
transports or transports in inclement weather.
ITEM # Weight ITEM DESCRIPTION Price
GTF5.MT 130 Metal Top Goat Tote Full Size – 5’ $509.00
GTF6.MT 154 Metal Top Goat Tote Full Size – 6’ $599.00
GTF8.MT 230 Metal Top Goat Tote Full Size – 8’ $785.00
Custom-Sized Totes
Northeast Gate Company can build a Custom-Sized Tote to fit any of your hauling needs. They can manufacture totes to fit
in the back of a truck, trailer, or even golf carts! Please call for a quote for your custom sized tote.
4
Loading Chute
This Loading Chute is like the chute pictured here, but is adjustable in
height and unlike the pictured loading chute, the support bar at 30'' is
removable and the ramp can be dropped down to a 12" height so the
ramp can also be used for loading animals into a stock trailer. This makes
the Loading Chute adjustable for a 30" height, or a 12" height depending
on where you are loading animals. Material used to make the Loading
Chute: 16 gauge pipe ends and 18 gauge pipe sides. Wire mesh is 6 gauge.
Measurements: Ramp is 5’ long x 17” wide (20 lbs.). Side panels are 5’
long x 5’ high at the tallest point (26 lbs. each), 4ft at the lower point.
Bows are 21” outside width, 18” inside width. (tall bow 16lbs.- short bow
14lbs) . The front bow is 6’-6” tall, the back bow is 5’ tall. Total weight of
the Loading Chute is 102 lbs. Maximum animal weight: approx. 400 lbs.
The Loading Chute breaks down into 5 pieces: 2 side panels (26 lbs. each), 1 front bow (16lbs.), 1 rear bow (14 lbs.), and 1 ramp (20 lbs.). @ 102lbs total. It can quickly and easily be disassembled for moving, hauling, or storage. The drop pins used to assemble your chute are permanently attached to the chute so they can not be lost in transit, and easily slide up and down for quick assembly.
Add wheels and hitch to your LOADING CHUTE so you can
make it quick and easy to move, and you can pull it behind your three
wheeler or other small motorized vehicles. With wheels added, you will not
have to break it down for moving if you are using it on several locations of
your farm.
Weight of the Loading Chute with the added wheels and hitch is 143 lbs. The
maximum load weight is approximately 400 lbs. *The wheels are removable.
ITEM # Weight ITEM DESCRIPTION Price
LC200 102 Loading Chute $399.00
ADDLCWH 143 Wheels and Hitch $115.00
5
Fitting Stand
All fitting stands come standard with ramp, side panels and standard head
piece with plastic chain (wheels not included). The floor is 23" tall. The stand
folds up flat for transporting. The deck is 48" long and 19 1/2" wide.
A milking head piece can be added to the fitting stand. Just remove regular
head piece and replace with the Milking
Head Piece.
ITEM # Weight Description Price
FS10 45 Fitting Stand with ramp $275.00
FSHP --- Milking head piece $80.00
FSWK --- Wheel kit $25.00
Chariots
These chariots are a convenient way to exercise your goats or sheep. They
can be manufactured with 2 head pieces up to 6 head pieces. Just hitch
the chariot to your ATV, secure your animals in the head piece and go. The
Chariots have a T-shaped drop pin hitch.
ITEM # Weight Description Price
CHAR2 40 2 head piece $329.00
CHAR3 60 3 head piece $370.00
CHAR4 90 4 head piece $389.00
CHAR5 110 5 head piece $450.00
CHAR6 130 6 head piece $499.00
6
Goat Butler
The Goat Butler is a fitting stand, but with many extras! Features of the
Goat Butler include:
Comes with “flat-free” 10” tires.
Has sealed ball bearing rollers and pulleys.
Includes a 800 lb. brake winch.
Raises 30” from deck (35” from ground)
Removable side panels.
400 lb. weight capacity.
Platform size is 19”x45”.
Pack Mule
The Pack Mule is made similar to the Goat Butler, but it does not have
a lift, winch cables, or brake. It does have the swivel tongue and side
rails, it is also the same size as the Goat Butler. The Pack Mule’s primary
function is to haul “stuff” like hay, grain, water, show supplies, etc. You
can even transport an animal on the Pack Mule by simply installing the
removable head piece. You can work and groom the animal if no lift is
needed to do so. *300 lb. weight capacity.
.
ITEM # Weight Description Price
BUTLER 171 Goat Butler $749.00
PMULE 75 Pack Mule with Head Piece $285.00
Work Smarter,
Not Harder!
7
GoatMaster Working Chute
Working Chute includes stand and ramp. Versatility is the key to making a long days work short. This chute has the unique
feature of a sorting gate built into a working chute, therefore, allowing one person the ability to hold, work, and sort animals
with ease. This chute has a self-latching head gate which adjusts from 3 to 7 inches when closed, for small or large animals.
Nose bar included for tattooing and ear tagging. Panels open on both sides for easy access to animals for hoof trimming,
vaccinating, treating wounds, etc. Made from all galvanized metal, and powder coated, this chute is guaranteed to last.
Portable Panels will interchange with this chute to make alleys and pens.
Add a Swinging Stop Gate to your chute at the bottom of
the ramp to hold an animal in the ramp area (pictured on left).
The GoatMaster Working Chute also features a medicine tray on top and drench
gun holders (pictured on bottom left).
Item # Weight Description Price
GMWCEL 314 GoatMaster Working Chute $1489.00
STGT Swinging Stop Gate $199.00
8
Economy Working Chute Working Chute designed and priced for the Sheep or Goat Rancher with smaller herds. This chute sets on the ground. The head catch is the same style as our grafting panels. Makes working goats by one person much easier. Swing gate in back to hold the goat in the chute once they enter. Once the head is caught, doors can open on either side to give shots, trim hooves, etc. With this chute being at ground level, it can also be used for grafting lamb/kids. Panels can be purchased separately and attached behind, or to the side of the chute to make alleyways, holding pens, and grafting pens, if needed.
Item # Weight Description Price
GCE14 Economy Work Chute $599.00
9
660 lbs. Digital Scale This Digital Scale will fit the GoatMaster Working Chute, Scale Cage (pictured below) or any alley way (featured in this catalog). The scale can operate by electricity or battery. Will weigh animals up to 660 lbs. The perfect addition to your GoatMaster Working Chute.
Scale Cage
Use this cage with the digital scales pictured above for
accurate readings when weighing animals. Ideal for goats, sheep, and
other small livestock. This Scale Cage can be incorporated into an Alley
Way system (featured in this catalog) The Scale Cage includes 2 side
panels and 2 door panels that fit together to make the Scale Cage.
Dimensions for the Scale Cage are shown below.
10
Heavy Duty Scale Cage
Use this cage with the VS660 pictured above or the VS1000 digital scales
pictured below for accurate readings when weighing larger sized animals
such as calves. Scale Cage includes 2 side panels and tow door panels that
pin together to make the scale cage. This cage is 4’ tall, clearance from
platform to bottom of cross bar is 43 ½”. Inside dimensions: 20 ¼” x 63”
long. This cage is made of all 1 3/8” x 16 gauge galvanized steel tubing and
weighs 120 lbs.
1000 lbs. Digital Scale
Easy to read LCD display. *Weighs in both Lbs & Kgs. *56" long x 20 1/4"
wide x 2.5" high. *1000 lb x 0.5 lb / 500 kg x 0.2 kg. *Scale platform painted
diamond plate steel. Ends of platform are sloped. *Built-in handles for
greater portability. *Digital weight indicator has a stainless steel mounting
bracket. *Display has quick disconnect. *Four adjustable feet for uneven
surfaces. *Scale weight is 63 lbs., shipping weight is 74 lbs. *Operates on
“AA” batteries or electricity (AC adapter included). 20 hour continuous
use battery life. *Front panel keys are: ON/OFF, Hold, UNIT and TARE. *To
be used with above Heavy Duty Scale Cage.
Item # Weight Description Price
VS660 47 660 lbs. Digital Scale $500.00
SC660 75 Scale Cage to fit 660 lbs. Digital Scale $280.00
HDSC660 130 Heavy Duty Scale Cage $460.00
VS1000 74 1000 lbs. Digital Scale $675.00
Purchase Scale Cage (#SC660)
AND Digital Scales (#VS660) for:
$ 730.00 (Save $50.00)
11
SWEEP TUB & WORKING SYSTEM COMPONENTS
Take the work out of handling your sheep/goats with a Northeast Gate Company Working System. Our corral systems are modular so you can design almost any style of system. In addition, numerous options can easily be added to the systems including the GoatMaster Working Chute, scales, and different styles of sort and stop gates. We have included several examples of Working Systems.
Item # Weight Description Price
GST410D 112 4’ x 10’ Solid Alley Panel w/ drop down section $295.00
GST410 95 4’ x 10’ Solid Alley Panel $269.00
GST408 82 4’ x 8’ Solid Alley Panel $237.00
GST402 28 4’ x 2’ Solid Alley Panel $110.00
GST406A 60 4’ x 6’ Solid Tub Panel – Curved $238.00
GSTG408 129 8’ Solid Tub Gate $475.00
GSTB408 35 8’ Tub Support Bow/Ground Bar $105.00
Sweep Tub & Working System Examples:
#1 Sweep Tub System
(without working chute)
PRICE: $ 1628.00
#1 Sweep Tub System and
#GMWCEL- Working Chute w/stand
& ramp PRICE: $ 3117.00
12
#2 Sweep Tub System
(without working chute)
Price: $2391.00
#2 Sweep Tub System and
#GMWCEL- Working Chute w/stand
& ramp Price: $ 3880.00
#3 Sweep Tub System
(without working chute)
$ 2638.00
Sweep Tub System with
Working Chute Price: $4127.00
14
10ft Solid Alley Panel with drop down section This area of the working system makes access to animals within the alleyway behind the chute easy. Top section of the 10ft panel drops down for easy access.
15
Big Bale Round Hay Feeders
BIG BALE ROUND HAY FEEDER _ BARS
The Big Bale Round Hay Feeder is a must for all goat and sheep
producers! Your hay is kept off of the ground and your animals are
unable to soil and bed in it. This Round Bale Hay feeder is 4' tall by
6' x 6' wide. Built with galvanized steel, 1-5/8" round tube on the
outer frame. 1- 3/8" round tube curved bars, and 1" round tube
vertical bar ends. The spacing between the feeder bars is 6-1/2”.
Feeder Bars are set on 8" centers. 15" from the ground to the hay
section. Door has a spring loaded latch to prevent livestock from
opening.
BIG BALE ROUND HAY FEEDER _ WIRE
MESH
The Big Bale Round Hay Feeder is also manufactured the same way
as the above feeder, but using 4” x 4” wire mesh instead of bars.
This feeder is 18 pounds lighter than the above Big Bale Round Hay
Feeder.
Item # Weight Description Price
Bb1000 180 Big Bale Round Bale Feeder – Bars $429.00
BB1000W 162 Big Bale Round Bale Feeder – Wire Mesh $429.00
16
Big Bale Round Hay Feeders Add On Options
BIG BALE ROOF FRAME
Add on a Big Bale Roof Frame to your Big Bale Round Hay Feeder to help
protect your hay from the elements. Customer supplies the roofing
materials which could be wood, metal or a large tarp. This hay bale feeder
with the roof frame will eliminate a lot of wasted hay, saving you money in
the long run.
BIG BALE TROUGH
Another Add On Options for your Big Bale Round Hay Feeder is the Big
Bale Trough. This trough will further help to keep your hay from getting
all over the ground.
Item # Weight Description Price
BB1000R 118 Big Bale Roof Frame Add On $259.00
BB1000T 70 Big Bale Round Trough Add On $179.00
Big Bale Feeder + Big Bale Roof Frame =
$675.00!
Save $15.00!
17
HAY RISER HAY RACK
These racks are ideal for feeding large bales of hay. Hay is kept
off of the ground. The Hay Riser Hay Rack will fold up flat when
not in use for easy storage when it’s not being used. Holds up to
1800 lb. bales, round or square. Included safety roll bars on ends
prevent hay from tipping or rack folding shut when no hay is on
the rack. Made of 1 3/8” x 14 gauge tubing.
HAY BASKET
Measurements of Hay Basket:
19.5" wide at top
16.5" wide at bottom
10" front to back at top
2" front to back at bottom
20" tall
Standard powder coated shipped Color is Powder Coated
BLACK, if you prefer another basic color than black, let us
know.
Item # Weight Description Price
HRISER 122 Hay Riser Hay Rack – Includes Roll Bars
$239.00
Item # Weight Description Price
HB101 Hay Basket $37.00
18
WALL MOUNT HAY RACK
Wall Mount Hay Rack with 4"x4" wire pictured, ideal to use with goats,
sheep, mini horses, alpacas, llamas, etc. The feeders are made with
galvanized steel and comes with wall mount brackets. This Wall
Mount Hay Rack is available in 4’ and 8’ sizes.
FOLD UP WALL MOUNT HAY RACK
6+ ft. Hay Rack that can be folded flat against the
wall, and latched, when hay rack is not being used.
The Fold Up Wall Mount Hay Rack is 76" long x 24"
tall x 22" wide top when open.
Item # Weight Description Price
WMHR4 20 4’ Wall Mount Hay Rack – Wire (Small) $85.00
WMHR8 54 8’ Wall Mount Hay Rack – Wire $134.00
WMHR – F6 6’ Fold Up Wall Mount Hay Rack $102.00
We build custom hay racks and feeders!
Let us know your needs!
19
Hanging Stall Feeder
This feeder is ideal to use in stalls, kidding pens, or at shows. Hooks in
back for easy attachment to fence or gate. Has section for hay and grain.
Made with bars or 4” x 4” wire mesh (pictured below). Ideal for all
smaller sized livestock such as alpacas, llamas, goats, sheep, etc. We have
had three of these since 2006 and we still use them today (2015)!
Feeders made with galvanized metal and POWDER COATED "Wheel
Grey" unless another color listed is requested.
Note: Feeder can be mounted on the wall, or attach included hooks for
hanging on board, pipe, etc.
Mini Horse Hanging Stall Feeder
This is the new mini hay and grain feeder. It is half the width of our current
Hanging Stall Feeder pictured above and works much better for miniature
horses and donkeys. There is more distance between the hay and the pan
so livestock with heads larger than sheep or goats can get their head in and
out better to eat grain.
Measurements:
Overall Height: 20"
Hay Manger: 12"
Width: 12 ½”
Deep: 14"
Item # Weight Description Price
GFKP 20 Small Hanging Stall Feeder – 20”
$79.00
GFKPL 40 Large Hanging Stall Feeder – 40”
$169.00
Item # Weight Description Price
GFMINI 14 Mini Horse
Hanging
Stall Feeder
$64.00
Specify Bar or Wire
when ordering!
20
Free Standing Hay Racks & Rain Canopies
Just drop a square bale in these feeders and cut the strings. The hay rack
breaks down and disassembles into 3 pieces for easy moving. The Free
Standing Hay Rack (shown at left and bottom left) comes in 4’ or 8’ long
sizes. The Free Standing Hay Rack can be made with vertical bars or 4” x 4”
wire mesh, you decide…it’s the same price.
Item # Weight Description Price
FHR4 62 4’ Free Standing Hay Rack $175.00
FHR8 95 8’ Free Standing Hay Rack $250.00
CAN4 4’ Rain Canopy for 4’ Free Standing Hay Rack $99.00
CAN6 6’ Rain Canopy for 6’ Free Standing Hay Rack $124.00
CAN8 32 8’ Rain Canopy for 8’ Free Standing Hay Rack $149.00
Do you have really small miniature
animals? Reduce leg height to
make the feeder lower to the ground for your very small animals at
no extra charge.
Hay Rack rain Canopy & Frame
Add to your 4ft and 8ft Free Standing OR 4ft, 6ft, or 8ft Heavy Duty with
Trough Hay Racks (featured on page 21). Easy access to open for filling
with hay. Will open from both sides for adding flakes of hay or canopy will
lift off to add entire bale. Clamp attachment with slide in holder for
canopy top. Canopy can be attached to frame with rope or zip ties. The
cover is waterproof, UV resistant, and will not crack or become brittle in
cold weather. White is the standard color of the canopy, other colors
available for $10.00 more.
21
Heavy Duty Hay Rack with Trough
The Heavy Duty Hay Rack with Trough is built extra tough for small animals. It
comes with the option of either bars or wire mesh (shown at left). The added
trough catches your valuable hay as animals eat, thus reducing waste and
saving your money. A rain canopy and frame can be added to these hay racks
for further protection of your hay. See page 20 for more information on our
rain canopies.
Heavy Duty Hay Rack with Trough DIMENSIONS:
34" wide at skids
29" wide at trough
26" wide at top of hay rack
18" from ground to top of trough
44" from ground to top of hay rack
6" deep trough
Bottom of hay rack sits at top of trough
Bars on 4" centers (3.25" between bars)
4' hay rack= 48" long feeder ; (54" long skids)
6' hay Rack= 72" long feeder (78" long skids)
8' hay rack= 96" long feeder ; (102" long skids)
Item # Weight Description Price
GFHD4 4’ long Heavy Duty Hay Rack with Trough – 4”x4” Wire Mesh $295.00
GFHD4B 4’ long Heavy Duty Hay Rack with Trough - Bars $295.00
GFHD6 6’ long Heavy Duty Hay Rack with Trough – 4”x4” Wire Mesh $359.00
GFHD6B 6’ long Heavy Duty Hay Rack with Trough – Bars $359.00
GFHD8 8’ long Heavy Duty Hay Rack with Trough – 4”x4” Wire Mesh $399.00
GFHD8B 8’ long Heavy Duty Hay Rack with Trough - Bars $399.00
22
EZ Feeder Panels
Easy Feeder Panels: a one of a kind item manufactured by Northeast Gate
Company. Feed your goats or sheep from the outside of the pen. These
panels make feeding your goats and sheep simple and easy. Door latch
stays shut while filling up your feeder without having to fight pouring feed
around animal’s heads while they are trying to eat. Once feeder is full, the
door can be opened and animals can eat with ease. Once finished, the door
can be latched shut again, keeping feeders clean by keeping animals out of
feed trough when not in use. The feed trough is quick and easy to remove
for cleaning if needed. These panels will also attach to our other 5ft. and
10 ft. panels or by using #PPFH-wall pockets and can be attached to an
existing wall or post (see page 29). You can also order custom sized EZ
Feeder Panels! The EZ Feeder products are 1 3/8" x 16 gauge frame and
1" x 16 gauge feed door and hay rack. 4"x 4" x 6 gauge welded wire mesh
insert.
Item # Weight Description Price
EZ405 60 4’x5’ EZ Feeder Panel (4”x4” Wire) $157.00
EZ410 102 4’x10’ EZ Feeder Panel (4”x4” Wire) $252.00
EZ412 125 4’x12’ EZ Feeder Panel (4”x4” Wire) $273.00
EZG410 103 4’x10’ EZ Feeder Panel Gate (4”x4” Wire) $320.00
EZG412 121 4’x12’ EZ Feeder Panel Gate (4”x4” Wire) $345.00
EZ405 60 4’x5’ EZ Feeder Panel (Hay Option Added) $220.00
EZ410 102 4’x10’ EZ Feeder Panel (Hay Option Added) $329.00
EZ412 125 4’x12’ EZ Feeder Panel (Hay Option Added) $367.00
EZG410 103 4’x10’ EZ Feeder Panel Gate (Hay Option Added) $387.00
EZG412 121 4’x12’ EZ Feeder Panel Gate (Hay Option Added) $417.00
Can be used in a fence line for large herd feeding needs
(pictured to left). The troughs shown in the
picture are not the troughs that come with the Easy
Feeder Panel.
THE Easiest Way
to feed your goats
or sheep!
23
8 ft. Sheep & Goat Feeder
This feeder is for all types of goats and sheep, even animals with horns.
V-shaped trough, grain area is 12 1/2 inches inside width, 6 inches deep.
The feeder is on skids to make moving easier. The top bar prevents
animals from standing in trough. 12 inches from the ground to top of
trough, 8 inches between trough and top panel. Feeder is 8ft long.
Double Side Grain Feeder
Double Side Bulk Grain Feeder works well for ADULT Goats and Sheep.
This feeder will also work for other animals approximately the same size
as ADULT goats and sheep. Trough is 18” off the ground.
Item # Weight Description Price
GFE8 8’ Sheep & Goat Feeder $209.00
Item # Weight Description Price
DBULK Double Side Grain Feeder $465.00
24
Portable Panels and Gates
The possibilities are endless with the many options of
Portable Panels and Gates Northeast Gate Company
offers!
All sizes of portable panels can be
inter-changed. Each panel connects with either drop pins
or rods (pictured below). Pens can be made as big or
small as you want them by attaching panels together.
Easy to move and quick set up. Can be used as kidding
pens, stalls, pens for expos or petting zoos, livestock
show pens, use your imagination.
Wire Panels with 4″X4″ wire openings or 2″x4″ wire
openings have been popular for sheep and goats. These also are great for hanging feeders on. The 2″X4″ wire openings
are more difficult for the livestock to climb on as well as children. However, the 2″X4″ wire panels are a heavier panel and
aren’t as common for fairs as some feel that added strength isn’t necessary.
Portable Panels and Gates 4’ tall (50”) – 4” x 4” wire
ITEM # Weight ITEM DESCRIPTION Price
GP405 26 4’ x 5’ Panel (actual height 50”) $60.00
GP410 48 4’ x 10’ Panel $101.00
GP412 59 4’ x 12’ Panel $117.00
GPG4025 33 4’ x 36” Bow Gate $86.00
GPG405 48 4’ x 5’ Bow Gate $120.00
GPG410 64 4’ x 10’ Panel Gate $175.00
GPG412 72 4’ x 12’ Panel Gate $195.00
Portable Panels and Gates 4’ tall (50”) – 2” x 4” wire
ITEM # Weight ITEM DESCRIPTION Price
GP405 26 4’ x 5’ Panel (actual height 50”) $69.00
GP410 48 4’ x 10’ Panel $119.00
GP412 59 4’ x 12’ Panel $138.00
GPG4025 33 4’ x 36” Bow Gate $96.00
GPG405 48 4’ x 5’ Bow Gate $132.00
GPG410 64 4’ x 10’ Panel Gate $195.00
GPG412 72 4’ x 12’ Panel Gate $214.00
All Portable Panels and Gates will interchange and attach to each other! Very
easy to set up, break down, and move!
25
Heavy Duty Portable Panels and Gates
The 4” x 4” and 2” x 4” panels can come reinforced with an extra horizontal bar attached 18” from the ground. The
extra horizontal bar is indicated by the orange arrow. The picture below shows an example of a bow gate to the left,
and a panel on the right.
Heavy Duty Panels (horizontal bar 18” from ground) – 4” x 4” wire
ITEM # Weight ITEM DESCRIPTION Price
HDGP405 30 4’ x 5’ Panel (actual height 50”) $67.00
HDGP410 55 4’ x 10’ Panel $115.00
HDGP412 68 4’ x 12’ Panel $133.00
HDGPG4025 35 4’ x 36” Bow Gate $92.00
HDGPG405 52 4’ x 5’ Bow Gate $127.00
HDGPG410 69 4’ x 10’ Panel Gate $189.00
HDGPG412 79 4’ x 12’ Panel Gate $211.00
Heavy Duty Panels (horizontal bar 18” from ground) – 2” x 4” wire
ITEM # Weight ITEM DESCRIPTION Price
HDGP405 30 4’ x 5’ Panel $75.00
HDGP410 55 4’ x 10’ Panel $133.00
HDGP412 68 4’ x 12’ Panel $155.00
HDGPG4025 35 4’ x 36” Bow Gate $99.00
HDGPG405 52 4’ x 5’ Bow Gate $137.00
HDGPG410 69 4’ x 10’ Panel Gate $208.00
HDGPG412 79 4’ x 12’ Panel Gate $232.00
Show pens, panels and gates are made from galvanized steel. They can also be manufactured from raw steel
and hot dip galvanized or powder coated. Show pens can be manufactured in 18 gauge, 16 gauge or even 14
gauge. We offer a variety of custom options and sizes not listed. If you don’t see the option you are looking
for listed, call or e-mail us for a quote.
26
Horizontal Bar Panels (Mini Horse Horizontal)
Horizontal bars are an attractive option making them popular for fairs. They
are great from a feeding standpoint as the hook-over feeders can be hung
on the bars. This style of pen was made for the American Boer Goat
Association.
The horizontal bars are welded on the inside of the frame.
39” Tall Mini Horse Horizontal 9 Bar Panel (18 gauge with ¾” bars)
ITEM # Weight ITEM DESCRIPTION Price
MH3905 26 39” x 5’ Panel $57.00
MH3910 48 39” x 10’ Panel $93.00
MHBG39 47 39” x 5’ Bow Gate $111.00
MHPG39 66 39” x 10’ Panel Gate $167.00
39” Tall Mini Horse HEAVY DUTY Horizontal 9 Bar Panel (16 gauge with 1” bars)
ITEM # Weight ITEM DESCRIPTION Price
MH3905-HD 39” x 5’ Panel $73.00
MH3910-HD 39” x 10’ Panel $117.00
MHBG39-HD 39” x 5’ Bow Gate $143.00
MHPG39-HD 39” x 10’ Panel Gate $216.00
4’ Tall Mini Horse Horizontal 9 Bar Panel (18 gauge with ¾” bars)
ITEM # Weight ITEM DESCRIPTION Price
MH405 27 4’ x 5’ Panel $60.00
MH410 50 4’ x 10’ Panel $101.00
MHBG48 49 4’ x 5’ Bow Gate $127.00
MHPG48 69 4’ x 10’ Panel Gate $189.00
4’ Tall Mini Horse HEAVY DUTY Horizontal 9 Bar Panel (16 gauge with 1” bars)
ITEM # Weight ITEM DESCRIPTION Price
MH405-HD 4’ x 5’ Panel $84.00
MH410-HD 4’ x 10’ Panel $141.00
MHBG48-HD 4’ x 5’ Bow Gate $173.00
MHPG48-HD 4’ x 10’ Panel Gate $252.00
Our pens have been used by many fairs and organizations, such as: State Fair of Texas, Texas A & M University, State Fair
of Louisiana, and the American Boer Goat Association (Nationals).
27
Vertical Bar Panels
Vertical bars are great for keeping the livestock from standing on pens, and for
keeping them from climbing on pens. A heavy duty horizontal bar can also be
added to hang feeders on. These are a great choice for pigs to help prevent them
from lifting up on the panels. 16 gauge and 14 gauge strengths are available…
we don’t recommend anything lighter than 16 gauge for hogs.
39” Tall Vertical Bar Panels (16 gauge with 1” bars, 4” centers)
ITEM # Weight ITEM DESCRIPTION Price
VB3904 32 39” x 4’ Panel $84.00
VB3905 37 39” x 5’ Panel $93.00
VB3906 43 39” x 6’ Panel $101.00
VB3907 48 39” x 7’ Panel $114.00
VB3908 53 39” x 8’ Panel $143.00
VB3910 65 39” x 10’ Panel $156.00
VBG3904 53 39” x 4’ Bow Gate $138.00
VBG3905 65 39” x 5’ Bow Gate $158.00
VBG3906 74 39” x 6’ Bow Gate $190.00
39” Tall Vertical Bar HEAVY DUTY Panels (14 gauge pipe with bars welded in frame)
ITEM # Weight ITEM DESCRIPTION Price
VB3904-HD 39” x 4’ Panel $103.00
VB3905-HD 39” x 5’ Panel $115.00
VB3906-HD 39” x 6’ Panel $126.00
VB3907-HD 39” x 7’ Panel $141.00
VB3908-HD 39” x 8’ Panel $176.00
VB3910-HD 39” x 10’ Panel $195.00
VBG3904-HD 39” x 4’ Bow Gate $171.00
VBG3905-HD 39” x 5’ Bow Gate $194.00
VBG3906-HD 39” x 6’ Bow Gate $229.00
28
Vertical Bar Panels Continued
48” Tall Vertical Bar Panels (16 gauge with 1” bars, 4” centers)
ITEM # Weight ITEM DESCRIPTION Price
VB4804 40 48” x 4’ Panel $99.00
VB4805 48 48” x 5’ Panel $110.00
VB4806 56 48” x 6’ Panel $125.00
VB4807 60 48” x 7’ Panel $140.00
VB4808 66 48” x 8’ Panel $164.00
VB4810 82 48” x 10’ Panel $188.00
VBG4804 58 48” x 4’ Bow Gate $150.00
VBG4805 73 48” x 5’ Bow Gate $171.00
VBG4806 80 48” x 6’ Bow Gate $207.00
48” Tall Vertical Bar HEAVY DUTY Panels (14 gauge pipe with bars welded in frame)
ITEM # Weight ITEM DESCRIPTION Price
VB4804-HD 48” x 4’ Panel $123.00
VB4805-HD 48” x 5’ Panel $137.00
VB4806-HD 48” x 6’ Panel $155.00
VB4807-HD 48” x 7’ Panel $173.00
VB4808-HD 48” x 8’ Panel $205.00
VB4810-HD 48” x 10’ Panel $234.00
VBG4804-HD 48” x 4’ Bow Gate $189.00
VBG4805-HD 48” x 5’ Bow Gate $215.00
VBG4806-HD 48” x 6’ Bow Gate $259.00
Rods and Pins
All panels are connected with either pins (pictured to left on top) or rods (pictured to the left on
bottom)…you choose. Each panel with come with either 2 drop pins or 1 rod. Additional pins and
rods can be purchased separately.
Double pins are also available. These are simply two single drop pins that are attached for making
rows of pens.
Drop pins and rods will be powder coated to match the color of the panel and/or gate you
purchase. Please see color choice options in the About Northeast Gate Company section.
ITEM # Item Description Price
SP Single Pin – 1” wide x 9” long $0.55
DP Double Pin – 2 single pins attached together $1.10
LR 4’ Long Rod $2.70
29
Wall Pins
These are handy little items when making pens in a barn with the portable panels when using
the back wall or posts as part of your pen. Attach panels directly to the wall. Thus saving you
from buying extra panels for the back part of your pen. To take pens down just remove the
drop pin for easy cleaning. Rebuild your pens in minutes. You will need two pockets per panel
end.
Panel gates come standard with zinc plated spring latches.
Customized Barns and Trailers (or Whatever You Need)
Do you want to customize a barn or trailer for your animals? We specialize in making panels to suit your needs. Let us
know what you are wanting or needing. We can make panels of different types and sizes to fit your existing barn or trailer!
Just let us know what you are looking for. Pictures below are of a couple of examples of custom work we have done.
ITEM # ITEM DESCRIPTION Price
PPFH Wall Pocket (1 ½” x 4”) $3.75
PPFH+SP Wall Pocket with Single Pin $4.34
30
Safety Panel for Birthing Pens
Add this panel to your kidding pens to allow kids or lambs to enter to a
protected area and prevent doe or ewe from laying on them. Also good
in grafting pens when doe is not in the Grafting Panel. This panel will fit
inside of our 5’x5’ Kidding Pen or any other 5’ wide stalled area.
Grafting Gate Panel.
Use for grafting kids to other does or ewes by having receiving animal's
head caught and restrained so kids/lambs can be easily grafted. This panel
will interchange and attach to our other portable panels to be used in
pens, or can be used alone. Grafting Panel pictured as a complete pen set
up but sold as an individual item.
ITEM # Weight ITEM DESCRIPTION Price
GPS305 24 3’ x 5’ Safety Panel for Birthing Pen $117.00
GGP405 34 4’x5’ Grafting Panel $133.00
BB500 Boy Basket $39.00
Boy Basket
For those ranchers that don't have that extra person around to hold
lambs or kids to castrate or band, the BOY BASKET can make this job
much easier. This holding basket is made with 6 gauge, 4" x 4" wire.
The legs hang down between the mesh giving you safe and easy access
to the job at hand.
31
Sheep and Goat Pasture Gates
These Pasture Gates were designed with sheep and goats in mind.
They are made with 4”x4” wire, instead of bars. Small animals are
unable to get out through. Pasture Gates come with a chain latch
and mounting hardware.
The Pasture Gates come in several different heights: 4’, 5’, and 6’.
Please see the table below for pricing.
4’ tall Pasture Gates with 4”x4” wire
ITEM # Weight ITEM DESCRIPTION Price
SG04 25 4’ Pasture Gate $65.00
SG06 35 6’ Pasture Gate $78.00
SG08 44 8’ Pasture Gate $89.00
SG10 52 10’ Pasture Gate $95.00
SG12 63 12’ Pasture Gate $110.00
SG14 71 14’ Pasture Gate $135.00
SG16 82 16’ Pasture Gate $155.00
5’ and 6’ Tall Panels and Gates (Specify 4”x4” Wire)
ITEM # Weight ITEM DESCRIPTION Price
GP505 30 5’x5’ Panel (actual height is 62”) $74.00
GPG505 53 5’x5’ Bow Gate $140.00
GP510 56 5’x10’ Panel $116.00
GPG510 73 5’x10’ Panel Gate $200.00
GP610 65 6’x10’ Panel (actual height 74”) $141.00
GPG610 83 6’x10’ Panel Gate $258.00
32
Mini Creep Feeder
This is a 150lb. feed capacity creep feeder. It has a roller gate on the front that
adjusts every 2" so that the openings can be made 4", 6" or 8". This creep feeder
is 36" long by 24" wide and 30" tall on 4" legs and it is all galvanized, then powder
coated in your color choice. Ideal for the Goat or Sheep Rancher with smaller
sized herds so they can purchase a creep feeder with entrance creep area
attached. This feeder weighs @ 80lbs empty.
Creep Feeder Box
Our Creep Feeder is available alone without Pen. Feeding area has adjustable
sliding feed control panel to manage how full feeder stays.
Grain area will hold 650lbs of feed. Top has a lid for easy feed filling from the
back of the feeder. This creep feeder is galvanized. NEW
added feature at no extra charge, these creep feeders now come with a rain
visor that can be raised or lowered over the feeding area to
protect the feed from the weather. Powder coated in your color choice.
Creep Feeder Box: 50" wide x 36" deep. Rain visor: 9" deep x 50" wide.
Feeding Trough area: 5" deep x 48" wide. Trough is 4" tall. Top Lip of
trough is 11 1/2" off the ground. Feeder empty weighs @ 130lbs.
Creep Feeder
vs.
Mini Creep Feeder
33
Creep Feeder with Entrance Pen
Creep Feeder has an adjustable feed flow control and entrance gate
that is also adjustable depending on the size of lambs and kids. Panels
attach with drop pins for easy entry if needed. Feed is poured in
easily from the top of the feeder on the back side. Holds 650 lbs of
feed.
*Includes creep feeder, 2 side panels, and front creep feeder panel
with adjustable creep door.
Creep Feeder with Bow Gate The same Creep Feeder as above, this set up includes 2 side panels but comes with a bow
gate entrance instead of the front creep feeder panel with adjustable creep door.
Creep Feeder Panel with Roller Bar Entry Door
This new creep panel opening is now adjustable with removable "roller bars". By removing
the center bar, you have one opening 4" wide and then by removing the two side bars and
leaving the center, you have two openings 4 .5" wide.
Bow Gates with Built in Creep Feeder Door
This is a handy idea for creep feed areas when people have to enter regular. Kids and lambs
can enter through the adjustable creep door located in the middle of the gate. Allowing for
the front of the gate to open, makes it very easy for people to enter the creep area. This
gate can be used with any of our other panels or installed to wall or post.
ITEM # Weight ITEM DESCRIPTION Price
GCFMINI 80 150 lb. Creep Feeder with Roller Entry $388.00
GCFBOX 130 650 lb. Creep Feeder Box Only $449.00
GCF650 200 650 lb. Creep Feeder with 5’x5’ Pen $599.00
GCF5G650 650 lb. Creep Feeder with Bow Gate $629.00
GCFFPO 32 Creep Door Front Panel 4’x5’ $109.00
GCBG4025 39 Creep Door Bow Gate 36” $139.00
GCBG405 54 Creep Door Bow Gate 5’ $169.00
34
Rabbit/Chicken Cages
These sturdy cages are made in sets of three. They are ideal for
rabbits and chickens, but can be used for any small animal that can
fit. They are situated 3’ off the ground and come with pull out trays
(see lower left picture) for easy cleaning. Overall dimension are 5’
tall, 6’ long, and 2’ deep. Each cage is 2’ x 2’…with no loose wires to
cause injury to animal or human.
ITEM # Weight ITEM DESCRIPTION Price
RC3 Rabbit/Chicken Cage $549.00
Wild Hog Live Trap
Wild hogs are in many areas becoming
a farmer and hunter's nightmare. The
trap pictured is 16' long but can also be
made in 8' length. All of these traps
are 4' tall and 4' wide with feed trough
and one way gate. This trap can catch
as many wild hogs as it can
hold (as opposed to other traps on the
market that can only catch one or two
hogs before the gate closes). A hitch
and wheels can also be added to the
16' live trap so that it
can be pulled like a trailer for an
additional cost.
ITEM # Weight ITEM DESCRIPTION Price
HT404 8’ Wild Hog Live Trap $455.00
HT416 16’ Wild Hog Live Trap (pictured) $845.00
35
Dog Kennels
Northeast Gate Company’s Dog Kennels are built to last. They are manufactured
with 2”x4” 6 gauge welded wire. The pen door has a spring latch. The pictures below
are our Rhodesian Ridgeback, Dixie. When we aren’t home, she gets to stay in a Dog
Kennel manufactured by Northeast Gate Company. She is a large, active dog and
this pen has held up remarkably. Prior to this pen, we had a pen from a local farm
store…Dixie had the latch busted off after 3 days.
ITEM # Weight ITEM DESCRIPTION Price
DK505 41 5’x5’ Panel $87.00
DK510 77 5’x10’ Panel $155.00
DKG505 54 5’x5’ Panel with Gate $154.00
DKG510 94 5’x10’ Panel with Gate $218.00
DK605 47 6’x5’ Panel $100.00
DK610 89 6’x10’ Panel $177.00
DKG605 63 6’x5’ Panel with Gate $172.00
DKG610 109 6’x10’ Panel with Gate $245.00