Good Luck IndustriesERW / CDW / Precision Tubes
Infinite, the possibilities we aspire
Good Luck Industries is an ISO-TS-16949 certified
company and Government of India Recognized star export
house. Incepted in year 2007, this company has made its
presence worldwide in the field of ERW\CDW precision
Tubes. For various applications in the field of Automotive
Industries, General Engineering, Textile Industry, Boilers,
Air-Heaters, Bicycle Industry etc.
A motivated andtalented teampowering growth
2500Workforce
Customers servedglobally across bothbusiness verticals
100Countries
A base ofcustomers spreadover the world
450Customers
Two decades ofconsistent growthand progress
25Years
We are manufacturing ERW/CDW precision Tubes as per
various National/International Standards. Our products are
regularly inspected by various Third Party inspection
Agencies both from National & International sectors viz.
SGS, Bureau Veritas, Lloyds, QSS, CROWN, TUV, etc.
A versatile business groupwith strong foundations
Good Luck Steel Tubes Ltd.
Steel StructureFabrication &Solar Structure
Cold Rolled Coils & Sheets
Galvanized Coils & Sheets
CRCA
Galvanized Structures forPower & Telecom Projects
Black / Galvanized Steel Tubes(Round / Sections)
Good Luck Industries
Good Luck Industries is an ISO-TS-16949 certified company and
Government of India Recognized three star export house.
Incepted in year 2007, this company has made its presence
worldwide in the field of ERW\CDW precision Tubes. For various
applications in the field of Automotive Industries, Bicycle
Industry, General Engineering, Textile Industry, Boilers, Air-
Heaters Hydraulic cylinder etc.
We are manufacturing ERW/CDW precision Tubes as per various
National/International Standards Our products are regularly
inspected by various Third Party inspection Agencies both from
National & International sectors viz. SGS, Bureau Veritas, Lloyds,
QSS, CROWN, TUV, etc.
We have an advanced manufacturing unit located at
Bulandshahar District of Uttar Pradesh, (India) facilitating
fabrication of steel products in bulk quantity. A thorough
inspection by Internal as well as external distinguished agencies
such as DGS & D, RITES, BHEL, Bureau Veritas, LRIS, QSS,
TUV, EIL, CEIL, NTPC, PGCIL and SGS ensures highest quality
in our product range. Our products are certified by Bureau of
Indian Standard (National Standard body of India) and also
covered under CE certification. As a group we have always
strived for continuous expansion and constant growth.
ERW / CDW Precision Tubes
Boiler / APH Tubes
Shock Absorber / Strut Tubes
Good Luck Engineering Co.Good Luck Industries
Forged / Machined Flanges
Forged Shafts
Precision Tubes
State-of-the-art pipe & section making technology
It's all about in-time delivery
Manufacturingprocess
Electrical resistance precision welded tunes process
Well defined processestimely delivery
Sectional tube of rectangular of square sections may be
achieved through specially designed, contoured rolls.
Cold saw installed at the tube mill cuts the tube with close
tolerance giving burr free & dimple free tube ends.
The ERW precision tubes thus produced are collected
in the turn-table.
For special applications, the tubes are required to undergo
a series of additional processes like annealing, pressure
testing, eddy current testing, straightening or further cutting
as per customer’s requirements.
The facilities for special applications inculdes the modern
draw benches for manufacture of CDW precision tubes of
close tolerances with a wide range.
Benefit from our experience
CDW tubes are produced by drawing the EWR tubes from the
tube mills through a plug and die combination, mounted on the
draw bench. The tubes which are endtagged after annealing, are
drawn through a closely machined die, which controls the
outside diameter of the tubes. And simultaneously passes over a
plug that controls its inside diameter.
The tubes thus produced are further processed by the
downstream facilities available at our manufacturing plant, for a
variety of end applications. These include the high precision
cylinder tubes, front fork tubes for auto industry, cylinder bore
tubes for shock absorber industry or tubes for pressure
application as in boliers.
Comprehensive manufacturing program range
Trusted lifetime partner for success
CEW-Tube Product Range(CEW- Round Tubes Product Range) (0.89 to 7.5 THK, 8.99 to 108.00 OD)
mm mm ThicknessTube
OD MinTube
OD Max
8.009.5311.1312.7015.8819.0523.8027.0531.1433.3538.1339.7342.8845.2649.2352.4060.3566.7076.2383.0188.9195.28101.70
9.5011.1012.6815.8519.0320.6027.0331.1233.3338.1039.7042.8545.2449.2052.3860.3366.6876.2083.0088.9095.25101.60110.00
0.80 0.90 1.00 1.20 1.35 1.40 1.60 1.80 2.00 2.11 2.20 2.41 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.10 4.20 4.40 4.60 4.80 5.00 5.10 5.20 5.50 5.60 5.80 6.00 6.20 6.35 6.50 6.60 6.80 7.00 7.20 7.50 8.00
ERW-Tube Product Range(ERW- Round Tubes Product Range) (1.00 to 9.5 THK, 22.23 to 117.00 OD)
mm Thickness
Tube OD
22.2325.4028.5831.7533.7034.9338.1040.0041.2842.4044.4545.0048.3048.6050.8054.0057.1560.3063.5070.0073.0076.2081.2088.9093.2695.75101.60108.00112.00114.30117.00
1.00 1.20 1.50 1.60 1.80 1.90 2.00 2.30 2.50 3.00 3.50 4.00 4.50 4.80 5.00 5.20 5.50 5.80 6.00 6.30 6.40 6.50 7.00 7.50 8.00 8.50 9.00 9.50
ERW - Square Tube Product Range(Section Tubes - Square)(1.2 to 6.0 THK, 31.75 to 101.60 OD)
mm mm Thickness
20x2025x2530x3035x3540x4050x5060x6070x7080x80
25.4031.7538.1044.4550.8063.5076.2088.90101.60
Section Tube OD 1.20 1.50 1.60 1.80 1.90 2.00 2.30 2.50 3.00 3.50 4.00 4.50 4.80 5.00 5.50 5.80 6.00
ERW - Rectangle Tube Product Range(Section Tubes - Rectangle)(1.2 to 5.0 THK, 28.58 to 108.00 OD)
mm mm Thickness
30x1430x2032x1940x2040x2540x3045x45
50.8x38.150x3050x4060x4080x4080x5090x50115x60
28.5831.7531.7538.1041.2844.4557.1557.1550.8057.1563.5076.2081.2088.90108.00
Section Tube OD 1.20 1.50 1.60 1.80 1.90 2.00 2.30 2.50 3.00 3.50 4.00 4.50 4.80 5.00
Specifications of TubesEquivalent Standards for tube manufacturingEQ Standards
Product Type
Automobile tube
Propeller shaft tube
Shock absorber tube
TFF tube
* Hydraulic cylinder tube
Section / Structural tube
Bicycle tube
General engg. Tube
Boiler tube
Air heated tube
Bobin textile tubes
Heat exchanger tube
Indian (IS)
IS 3074
IS 3074
IS 3074
IS 4923, IS 1161
IS 2039
IS 3601
IS 1914
IS 3601
British (BS)
BS 6323
BS 1717
BS 6323
BS 3059
BS 3059
BS 3606
Japanese (JIS)
G 3445
G 3452
G 3466
G 3445
G 3445
G 3461
G 3461
G 3461
German (DIN)
DIN 2393, DIN 2394
DIN 2393
DIN 2393
DIN 17177
American (ASTM)
A 513
A 513
A 500
A 53, A 214
A 214
A 178, A 214
European (EN)
EN 10305-2 & 3
EN 10305-6
EN 10305-5
Customer Specification
Yes
Yes
Yes
Yes
1) All Above specfications shall be applicable as per latest editions 2) * Product can be supplied in H9 tolerence as per applicability
3) Product can supply in ERW and CEW tubes as per requirements 4) Supplying conditions are as rolled, as drawn, as annealed and as normalized (Bright / Annealing)
Key provider for auto industry
Precision tubes for applicationsthat demand accuracy
Boilers and Heaters
Chemical / Sugar Industry
Super Heater
Paper / Process Industry
Air Pre Heater
Heat Exchanger
General Engineering
Bearings and Spindles, Trolley Handles Hydraulic and Pneumatic line, Electrical Conduit
Oxygen lancing pipes, Cycle pumps, industrial chain roller, Gas stove lighter
Electrostatic Precipitations
Textile frames and Bobbins
Main beam for pedestal fans
13
12
14
1
2
4
5
11
3
10
6
97
8
1 Shock absorber
2 Drive-Shaft
3 Anti-roll Bar
4 Cross-member
5 Gas-filled Strut
6 Axle Shaft
7 Instrument Panel Frame
8 Power Steering System
9 Steering Column
10 Corrugated Tube (steering column)
11 Transverse Control Arm
12 Engine mount
13 Vibration damper (rubberised metal)
14 Engine
Automobiles
Front fork Top / Bottom
Steering column
Two wheeler main frame
Bottom chassis
Fuel tank spacer
Swing arm
Propeller shaft
Seat frame
Tie rod
Rocker arm shaft
Catalytic converter
Fuel injection
Side impact beams
Four wheeler dash board frame
Shock absorber
Silent blocks
Control arms
Gear Shift lever
10
9
8
7
6
5
4
3
2
1
12 11
13
1 Front Forks
2 Main Frame
3 Leg Guard
4 Exhaust Tubes
5 Main Stand
6 Side Stand
7 Seat Rest
8 Shock Absorbers
9 Swing Arm
10 Saree Guard
11 Steering Head Tube
12 Handle Bracket column
13 Handle Bar
Key provider for 2 wheeler industry
Certifications
Recognizedby experts
Quality Assurance begins at the raw material stage itself.
Material is inspected for chemical composition and tested
for other parameters like mechanical properties, gauge
variation etc. for a total evaluation of the raw material to
ascertain its suitability for the intended end-use applications.
At the surface-pickling operations, the material is checked
for surface finish before it is fed into tube mills.
At the tube mills, each product for the customer is
processed according to the norms sequenced by the
process control engineers based on stringent international
standards and monitored through uncompromising quality
control tests of every stage.
Towards this purpose, the engineers are guided by the latest
equipment at our R&D centre that include Leco Carbon
apparatus, scanning electron microscope, atomic
absorption emission spectrophotometer, universal
microscope and micro hardness tester. These facilitate all
the requirement metallurgical tests on the materials.
Our domestic customers
Our global associations
certificate 4 certificate 5 certificate 6
Achieving excellence
Awards &recognition
Hon'ble Commerce Minister (Govt. of India)Presenting Award to Shri M. C. Garg (CMD.)
Also won Silver Trophy for two consecutive
years (2003-04/2002-03) from Federation of
Indian Export Organization.
Winners of Award of Excellence in Exports for
Northern Region from Engineering Export Promotion
Council for the Last Three Years.
We have won major certifications from
EEPC for our exports to major global destinations.
Testing & packaging
Production Cycle Testing
Eddy current (SEP 1925)
Ultrasonic (SEP 1915)
Laser
Roughness
Visual
Dimensional
Laboratories
Chemical analysis up to 23 elements
Mechanical tests:Yield strength, Tensile strength,Elongation, Compression
Impacts testsTemperatures:
0 0 0atmospheric, 0 C, -20 C, -40 C
Roughness
Metallographic tests
Packaging
Internal and external oiling,
for temporary storage, upon request
Plastic caps at the ends
Further special packaging by agreement
Playing our role in transporting resources, assisting development
The highest focus onengineering excellence
Drive shaftHigh strength with
dimensional control
Front fork tubeClose dimensional tolerance
high strength & fatigue life material
SAF - 1541
Tie rodHigh strength to be used in
four wheeler segment material
ST - 523
Rack tubeCloser dimensional tolerance
with high surface finish
used in power steering cylinder
Hydraulic cylinder tubeHigh strength tubes
high surface finish
H-9 tolerance
Cylinder bore tubeThin wall cylinder tube
having surface finish with
closer tolerance on dimension
Strut tubeHigh strength with
closer tolerance
Drag link suspension link tubeHigh strength tube
Section tube for chassisHigh strength with
close dimension
Rear axleHigh strength tube
suitable for bearing
www.goodlucksteel.com
Regd. Office
5/102, Sikka Complex,
Community Centre,
Preet Vihar, Vikas Marg,
Delhi - 110 092. INDIA
T : +91-11-22465439
F : +91-11-22214254
Administrative Office
II F 166-167, Goodluck House,
Nehru Nagar, Ambedkar Road,
Ghaziabad (U.P.) INDIA
T : +91-120-4196600, 4196700
F : +91-120-4196666, 4196714
A Govt. of India Recognized Export House
Good Luck Industries
Works
A-42/45, Industrial Area, Sikandrabad,
Distt.- Bulandshahr - 203205 (U.P.) INDIA
T : +91-5735- 221969, 221970
F : +91-5735- 222863
(A Unit of Good Luck Steel Tubes Ltd.)
Export to over 25 countries worldwide
India is our homewe are in tune with rest of the world