Goodfellow Cambridge Limited · Thin sheets of pure metal and metal alloys. Due to their fragile...

Goodfellow Cambridge LimitedErmine Business Park

HUNTINGDONPE29 6WREngland

Tel: 0800 731 4653 (UK)or +44 1480 424 800

Fax: 0800 328 7689 (UK)or +44 1480 424 900

Goodfellow Corporation305 High Tech DriveOakdale, PA 15071

USA

Tel: 1-800-821-2870 (USA)or +1 724 695 7060

Fax: 1-800-283-2020 (USA)or +1 724 695 7063

Goodfellow SARL229, rue SolferinoF-59000 Lille

France

Tel : 0800 917 241 (numero vert)or +44 1480 424 813

Fax : 0800 917 313 (numero vert)or +44 1480 424 900

Goodfellow GmbHPostfach 13 43

D-61213 Bad NauheimGermany

Tel: 0800 1000 579 (freecall)or +44 1480 424 810

Fax: 0800 1000 580 (freecall)or +44 1480 424 900

Web : www.goodfellow.com

Email: [email protected]

Check out www.goodfellow.com or email [email protected] for latest pricesFebruary 2009 #Goodfellow Cambridge Limited

Check out www.goodfellow.com or email [email protected] for latest pricesCheck out www.goodfellow.com or email [email protected] for latest prices

CONTENTS

Introduction 4

Product Descriptions 5

Technical Information 9

General Information 10

Order information 11

Company Details 13

Conditions of Sale 14

Polymer 18

INDEX 174

Standard Price List for All Polymers

Check out www.goodfellow.com or email [email protected] for latest pricesFebruary 2009 #Goodfellow Cambridge Limited

Check out www.goodfellow.com or email [email protected] for latest pricesCheck out www.goodfellow.com or email [email protected] for latest prices

Goodfellow is well known as a specialist supplier ofsmall to medium size quantities of metals, alloys,ceramics, polymers and other materials to meet theresearch, development and specialist productionrequirements of science and industry worldwide.We realise that "small" means different things todifferent people, but we consider small to mean anyquantity from a few grammes to a few kilos.

Goodfellow offers two distinct services to meet therequirements of our customers:

. The first meets the needs of our customers whoneed small quantities of products from ourstandard range of materials within 24-48 hours.

. The second service is for those who requirelarger quantities or further processing of ourstandard products or who need an item whichfalls within our general area of supply expertise.

The range of materials offered by Goodfellow isextensive as are the forms in which the variousproducts are available. This Directory provides adetailed overview of our standard products which areavailable ex-stock. Full details of all of these items,including prices and technical information, can befound in our web Catalogue at www.goodfellow.com.

Materials

Metals and Alloys

Goodfellow supplies virtually all of the pure metalsfrom Aluminium to Zirconium as well as acomprehensive range of alloys. Most are availablein a variety of forms, including rod, wire and foil. TheDirectory details those materials which are availableas standard products from stock. Custom-madeitems are also available, so please contact us ifyou are unable to identify the item you require

Ceramics

The ceramic materials offered by Goodfellow havebeen carefully chosen and include both theestablished as well as more recently developedproducts. All are available as either standard orcustom-made products in a variety of forms andsizes. The Directory details those items which areavailable from stock; please contact us if you areunable to find the specific item you require.

Polymers

The range of polymers supplied by Goodfellow isbroad and includes both the familiar as well as someof the more unusual or recently developed materials.The Directory details those items which are availablefrom stock; please contact us if you are unable to findthe item you specifically require.

Compounds & Intermetallics

Goodfellow can supply aluminides, borides andsilicides as well as other intermetallics andcompounds. The majority of these items are madeto order and the Directory details those which areavailable. Please contact us with details of yourrequirements.

Composites

Some examples of these materials are listed in theDirectory. As some of these are manufactured on acustom-made basis, please contact us with details ofyour requirements.

4#Goodfellow Cambridge Limited

Check out www.goodfellow.com or email [email protected] for latest prices

Introduction

February 2009

Bar

A straight length of rectangular, square or ovalsection material.

Tolerances

Section dimensions: 410mm +10%>10mm +1mm

Length: <100mm +1mm5100mm +5% / -1%

Chopped Fibre

Fibres cut into short lengths called cut, staple orchopped fibre.

Tolerances

Fibre diameter: +25%Number of strands: +10%Tex number: +10%Length: +5% / -1%

Crucible

Fabric

Woven fabrics are made by the regular interlacing oftwo arrays of yarns at right angles to each other,these being referred to as the warp and weft (seealso Non-woven fabric).

Tolerances

Fabric thickness: +25%Number of yarns: +10%Tex number: +10%Size (linear dimension): <100mm +5mm

5100mm +5%

Fibre

Yarns or tows consisting of several approximatelyparallel individual filaments, each filament usuallybeing smaller in diameter than a monofilament.Yarns contain a defined number of filaments,typically three to several hundred; tows containthousands of filaments whose number is onlydefined approximately. Both are primarily specifiedby their linear density measured in "tex", the weightin grams of a 1km length of material.

Tolerances

Fibre diameter: +25%Number of strands: +10%Tex number: +10%Length: +5% / -1%

Film

A non-metallic sheet material with a thickness<0.5mm.

Tolerances

Thickness: +20%Size (linear dimension): <100mm +1mm

5100mm +2% / -1%

Flake

Flat, irregularly shaped pieces of material. Amaximum flake size is indicated but individualflakes may vary greatly in size.

Tolerances

Dimensions shown are nominal

Foam

A low density, permeable structure of cells andcontinuous ligaments offering a high surface area tovolume ratio, and also a high, strength to weightratio. Owing to the nature of this material,dimensions are nominal.



Product Descriptions

February 2009

Foil

Thin sheets of pure metal and metal alloys. Due totheir fragile nature, some foils are coated on one sidewith an acrylic or polyester support.

Tolerances

Thickness: <0.010mm +25%0.010 - 0.050mm

+15%>0.050mm +10%

Size (linear dimension): <100mm +1mm5100mm +2% / -1%

Granule

Pellets of an approximately regular shape. Granulesmay vary in size and, therefore, the dimensionsstated are nominal. In addition, the shape of agranule may vary from item to item.

Tolerances


Honeycomb

A cellular structure similar in appearance to naturalhoneycomb. Owing to the nature of this material,dimensions are nominal.

Insulated Wire

A single or multiple flexible strand of metal or alloywith an insulating sheath.

Tolerances

Wire diameter: +10%Length: +5% / -1%Insulation thickness: Nominal values only

Laminate

Layers of material which have been bonded togetherby the use of heat, pressure and, possibly, adhesive.

Tolerances

Thickness: +10%Size (linear dimension):4100mm +1mm

>100mm +2% / -1%

Liquid

This form is self-explanatory.

Lump

A solid piece of material with no defined shape.

Tolerances


Mesh

Mesh is available as either a woven wire orelectroformed product; in all cases, the quotedaperture sizes are nominal. Wire mesh Amaterial which is woven from metal wires to providea thin grid with a regular series of holes.Electroformed mesh A product made byelectroplating the mesh geometry through a maskonto a substrate which is subsequently etched away.

Tolerances

Thickness: woven: +10%electroformed: +20%

Wire diameter: +10%Size (linear dimension): <100mm +1mm

5100mm +2% / -1%

Metallised Film

Film which is coated with a metal. The thickness ofthe metal is measured and described in terms of thematerial’s specific electrical resistance in ohms persquare.

Tolerances

Thickness: +10%Size (linear dimension): <100mm +1mm

5100mm +2% / -1%




February 2009

Microfoil

An extremely thin sheet of metal or alloy mounted ona permanent support. This support cannot beremoved without destroying the Microfoil.

Tolerances

Thickness: +30%Size: +20%

Microleaf

An extremely thin sheet of metal mounted on aremovable support. Microleaf is not available formetals which are too brittle to be free standing.

Tolerances

Thickness: +30%Size: +20%

Monofilament

A single strand of a non-metallic material.

Tolerances

Diameter: +20%Length: +5% / -1%

Non-Woven Fabric

Non-woven fabrics are made by methods other thanweaving or knitting, the yarns and fibres being heldtogether, often quite loosely, by means other thangeometric interlacing. Due to the open and porousnature of this material, all other dimensions arenominal. conventional textile fabrics. Due to theopen and porous nature of this material, all otherdimensions are nominal.

Tolerances

Size (linear dimension): <100mm +5mm>100mm +5%

Powder

Small particles with an approximately defined sizerange. Unless otherwise stated, the particle sizesshown are for guidance only. We do not guaranteeeither any particular size distribution between thequoted minimum and maximum sizes, or a specificparticle shape. size range. Unless otherwisestated, the particle sizes shown are for guidanceonly. We do not guarantee either any particular sizedistribution between the quoted minimum andmaximum sizes, or a specific particle shape.

Tolerances


Rod

A straight length of circular section material.

Tolerances

Diameter: <10mm +10%+20%/-10% -

Polymers/Ceramics>10mm +5%

+20%/-10% -Polymers/CeramicsLength: <100mm: +1mm

5100mm: +5% / -1%

Sheet

Flat material with a thickness >0.5mm.

Tolerances

Thickness: +10%Ceramic +20%Composite +20%Polymer +20%

Size (linear dimension): <100mm +1mm5100mm +2% / -1%




February 2009

Single Crystal

A material grown as a monocrystal, generally to aspecific orientation, dimension and surface finish. Itmay contain a dopant. Single crystals are usuallymade to order.

Tolerances

Orientation: +38Size: Sizes shown are nominal

Sphere

Small balls which are precision ground.

Tolerances

Diameter: +5%

Sputtering Target

A high purity material used as a source forsputtering, a cold vapourisation process in whichatoms are physically removed from the targetsurface by ion bombardment.

Tolerances

Thickness: +0.5mmSize: +0.5mm

Tube

A hollow length of material normally circular insection. Most tubes are straight except thosemade of flexible polymer.

Tolerances

Outside diameter: 42mm +0.05mm+10% -

Polymers/Ceramics45mm +0.1mm

+10% -Polymers/Ceramics

>5mm +5%+10% -

Polymers/CeramicsWall thickness: +10%

+20% -Polymers/CeramicsLength: <100mm +1mm

5100mm +5% / -1%

Wire

A single or multiple flexible strand of pure metal oralloy.

Tolerances

Wire diameter: +10%Length: +5% / -1%




February 2009

HAZARDS

All materials listed in this catalogue, whatever thequantity supplied, are sold for research ordevelopment purposes. We make no warranty thatthe materials are fit for a particular purpose. Inpurchasing materials from this catalogue, customersshould be aware that there may be hazardsassociated with their use and in the handling ofthem. Comple te tox ico log ica l o r hazardinvestigations are the responsibility of thecustomer. Ingestion or contact with the humanbody may be harmful. The responsibility for thesafe use of our products rests with the customer. Allmaterials should be handled by qualified personnelfamiliar with laboratory procedures and who arefamiliar with the nature of the material and anynecessary precautions which should be taken in thehandling, use and storage of the products. Thecustomer shall be responsible for the control and useof the products offered in this catalogue whetheralone or in combination with other articles orsubstances or in any other manner whatsoever.

HAZARD SYMBOLS

C

CorrosiveChemicals which may destroyliving tissue when in contact withthem.

D

Dangerous when wetChemicals which, in contact

with water or damp air, evolvehighly flammable or toxic gasesand vapours in dangerousquantities.

E

ExplosiveChemicals which may reacte x o t h e r m i c a l l y w i t h o u tatmospheric oxygen, quicklyevolving gases, and whichunder defined test conditionsdetonate, quickly deflagrate orupon heating explode whenpartially confined.

Fþ

Extremely FlammableChemicals which when finelydivided (small particle size) areliable to ignite spontaneously.

Xn

HarmfulChemicals which may causedeath or acute or chronicdamage to hea l t h wheninhaled, ingested or absorbedvia the skin.

F

Highly flammableChemicals which will ignite aftercontact with flame, or which willevolve highly flammable gasesin contact with water.

Xi

IrritantNon-corrosive chemicals which,through immediate, prolonged orrepeated contact with the skin ormucous membrane may causeinflammation.

R

RadioactiveChemicals which will emitionising radiation without beingsubject to irradiation. Generalprecautions for Toxic chemicalsapply to those of low activity.For chemicals of medium or highactivity special regulationsapply.

T

ToxicChemicals which may causedeath or acute or chronicdamage to hea l t h wheninhaled, ingested or absorbedvia the skin.

Tþ

Very ToxicChemica l s wh i ch i n l owquantities cause death or acuteor chronic damage to healthwhen inhaled, ingested orabsorbed via the skin.



Technical Information

February 2009

Analyses

Typical Analysis :

Where appropriate a typical analysis is given. Allfigures are parts per million (ppm) by weight unlessotherwise stated. It must be emphasised that thisdata is "typical" and no guarantee is given that thematerial supplied will conform to these analyses.The compositions shown under alloy headings aregenerally weight percent. Exceptions are the glassyalloys and the rare earth magnets where theconvention of using atomic ratio is followed.

Purity

Purities listed are quoted with respect to total metallicimpurities. Typical analyses may give additionalinformation about likely non-metallic impurities.

High Purity

For materials described as High Purity, the actualanalysis of metallic impurities will be supplied free ofcharge. For other items, an actual analysis can besupplied and a charge will be made for the analysisand for the sample used.

If you require an analysis please tell us whether yourequire analysis of metallic impurities only or metallicand gaseous. Where an analysis is required theshipment of your order may be delayed.

Supports

Some items from our range of foils need to besupported on one side of the foil to enable both youand us to handle these very delicate materials. Twotypes of support can be used, the choice beinggoverned by the material. Wherever possible we usea temporary support, a permanent support onlybeing used when the material is brittle (for exampleChromium or Manganese).

The temporary support is Acrylic, approximately0.2mm thick. This may be removed by dissolvingin 2-Propanone (Acetone).

Our permanent support is Polyester, thickness0.125mm, which is hot-press laminated to one faceof the foil. It cannot be removed without destroyingthe foil.

Microfoil is mounted on a permanent 3.5mmpolyester support. This support cannot beremoved without destroying the Microfoil.

Microleaf is mounted on a specially treated supportwhich allows separation of the metal film from thesupport. Full instructions on the method of removalare issued with each Microleaf supplied.

Light Tight (LT) & Not Light Tested(NLT)

LT foils are supplied without visible pinholes whereasNLT foils will normally contain pinholes but mayoccasionally be free from pinholes. Foils 0.025mm ormore in thickness are supplied LT unless otherwisestated. Foils less than 0.025mm are normallysupplied NLT, however, if you require LT foils,please ask. An additional charge may be made ifwe are able to supply LT foils.

Vacuum tight

Vacuum tight foils show no detectable leakage whentested with a helium mass spectrometer with asensitivity of 10-9 atm-cm3.s-1.

Continuous Lengths

If you require material in continuous lengths pleasetell us when you place your order. Unless otherwisespecified, we reserve the right to supply in more thanone length.

Technical Data and Information

All information and technical data are given as aguide only. Although every effort has been made toensure that the information is correct, no warranty isgiven as to its completeness or accuracy.

Tolerances

For details of our standard tolerances, please refer tothe Product Description section. In many cases,closer tolerances are available but may be subject toan extra charge. If you have any specialrequirements it is important that you tell us at thetime of ordering. This includes special tolerances,dimensional uniformity or any other specialrequirement which you may have (for exampleedge finish, packaging, labelling etc.). Pleaseindicate precisely what is required and we shall doour best to meet your specification.



General Information

February 2009

General Information

There are over 70,000 stock packs listed and if youcannot find what you need amongst them, pleaseask for special sizes, thicknesses, tolerances,dimensions or larger quantities. We are also able tooffer many other pure metals, alloys, polymers andceramics to special order.

Prices

All the prices listed are total (lot) prices for the sizesand quantities listed. Prices are subject to changewithout notice.

Prices shown include delivery except for those itemsmarked as "special offer" or dangerous goods withtransport restriction. They do not include valueadded tax, any import duties or local taxes.

Transport Restriction

Some of the materials supplied by Goodfellow aresubject to special transport restrictions. Additionalshipment charges may apply which are dependenton destination. Please check the individual item onour website or contact us for details of the charges.

If you intend to have the material transported or sentonwards please ensure that you are aware of therelevant transport restrictions.

Delivery

Split shipment

All orders are accepted for one shipment on one dateto one address. A charge will be made for splitshipments made at the customer’s request.

Special Analysis, Supports orTolerances

An extra charge is made for non-standard supports,alternative tolerances and certificates of analysis.The analysis is free of charge for items marked "HighPurity".

Cancellations

A charge for cancellation of orders may be made.The amount will depend on the circumstances.

Express Service

An administration charge of £10 will be made for anyorder received for which same day shipment withinthe UK is requested.

Shipment

We aim to have all items listed in this catalogue instock in the quantities and sizes listed. We can onlyundertake to despatch an order on a particular date.The date of delivery at the customer’s address issubject to the normal variations of the deliveryservice used.

Despatch

Orders will normally be despatched within 48 hoursof receipt.

Non delivery

If we have notified you of despatch of goods and youhave not received delivery within 7 days, pleasecontact us.

Insurance

All consignments will be insured by us against theusual risks unless we are instructed in writing to thecontrary.

Export Restrictions

A UK Government export licence may be required forsome items to some destinations. If the item yourequire needs a special export licence or an end-usestatement we will inform you at the time you order.

Materials Handling

Many of our materials are extremely delicate and it isessential every care is taken when handling them.Special attention is drawn to the extreme fragility ofMicrofoil, Microleaf and thinner and finer materials.

All materials are carefully packed to ensure safetransport of goods to your address. We do not acceptresponsibility for damage caused by mishandlingonce the outer transit packaging has been removed.

Terms of payment

Our normal terms of payment are net 30 days fromdate of invoice. Any alternative terms of paymentare to be agreed with us in writing at the time ofplacing an order. Customers may be asked to paycash with order or cash against pro-forma invoicewith their first order. In order to establish a creditaccount we will require details of your bankers, alongwith two trade references.



Order information

February 2009

Credit account

We endeavour to keep our costs down andcustomers are requested to pay our invoices ontime. We reserve the right to delay delivery if thereare overdue invoices on the account. Accountswhich remain unpaid beyond the due date may incuran interest charge at a rate of 2% per month.

Credit card payments

We also accept payment using the following creditand charge cards:

Mastercard, VISA, American Express, DELTA andSwitch.

VAT

VAT number: GB 212 8527 79

UK

VAT will be added to the invoice at the rate ruling atthe date of invoice. Where a customer is exempt,VAT will be charged unless we receive a copy of theexemption form at the time the order is placed.

EU

Customers registered for VAT who provide their localregistration number will not be charged UK VAT.

Customers who are exempt from VAT will not becharged UK VAT provided we are given a copy oftheir exemption form at the time the goods areordered.

Customers not registered for VAT or who fail to giveus their registration number will be charged UK VATat the current rate.

Export

All exports to countries outside the EU are zero-ratedfor UK VAT unless the invoice is being paid fromwithin the EU.

Return of goods

We will only accept return of goods provided we arecontacted BEFORE the goods are returned. Whenwe agree to the return we will issue a Goods ReturnNumber and give instructions for the method ofreturn of the goods. Goods will not be accepted forreturn without a valid Goods Return Number.

Claims

Great care is taken during manufacture and packingand all items are carefully inspected beforeshipment. Any claim in respect of short delivery,incorrect material or defective quality must benotified to us in writing within three days ofdelivery. Please retain ALL packaging for ourinspection. Our liability for any such claim shall notexceed the cost of replacement of the goods free ofcharge, or crediting the customer with the invoicevalue thereof.

Goods ordered in error

We do not accept responsibility for customers’ errorsin ordering. The amount of credit for returned goodswill be at our discretion. Where we accept returnedgoods a restocking charge will be made.

Conditions of sale

All orders, contracts and quotations are subject toour standard

Information and statements provided are indicativeonly and do not form part of any offer or contract.

Exclusions

We supply materials according to our specification.All conditions warranties and representationsregarding the quality, fitness for purpose or state,size, shape, capacity or colour of goods suppliedwhether expressed or implied by common law orstatute or otherwise are hereby expressly excluded.We shall not be liable for any damage direct orconsequential arising from the use of goods suppliedby us however such damage is caused, nor for delayin delivery.

Law

Contracts between Goodfellow and the customershall be deemed to be subject in all respects toEnglish law unless otherwise agreed in writing.



Order information

February 2009

Company Structure

The Goodfellow Group consists of four companies:

Goodfellow Cambridge Limited

Goodfellow was established in the City of London in1946. The Company now has subsidiary operationsin France, Germany and North America with theGroup’s research laboratories, workshop facilities &central administration located in Huntingdon,England.

Goodfellow Corporation

Established at the same time as our associatecompany in Germany, Goodfellow Corporation wasset up to service the requirements of our NorthAmerican customers.

Goodfellow GmbH

Since 1989, this member of the Goodfellow group ofcompanies has been serving the needs of ourGerman speaking customers within Europe.

Goodfellow SARL

Goodfellow established an operation in France in1993 to meet the needs of our French-speakingcustomers in Europe.

COMPANY DETAILS

Goodfellow Cambridge Limited

Ermine Business ParkHUNTINGDONPE29 6WREnglandRegistered in England and Wales no. 1188162VAT registration GB 212 8527 79

Goodfellow SARL

229, rue SolferinoF-59000 LilleFranceRegistered in Lille : RCS : B 381 486 836Siren : 381486836Numero de TVA Intracommunitaire :FR 06 381 486 836

Goodfellow GmbH

Postfach 13 43D-61213 Bad NauheimGermanyRegistered in Friedberg (Hessen) No. HRB 1309Import VAT number DE112610478

Goodfellow Corporation

305 High Tech DriveOakdale, PA 15071USAA Pennsylvania corporationEIN 23-2557381



Company Details

February 2009

1 GENERAL1.1 In these Conditions:

1.1.1 the following expressions shall have the following meanings:-

"Buyer" the individual firm company or other party fromwhom an order to supply Goods and/or Services isreceived by the Seller;

"Conditions" the standard terms and conditions of sale of theSeller as set out herein and includes anyadditional terms and conditions of sale agreed inwriting by the Seller;

"Contract" a contract for the Supply of Goods and/orServices by the Seller to the Buyer;

"Date of Delivery" the date on which delivery of the Goods orServices takes place pursuant to Condition 7;

"Goods" the goods which the Seller is to supply (or,in relation to Condition 11, the goods in respectof which the Seller is to provide Services) underthe Contract and includes any of them or any partof them and where the context so admits includesraw materials, processed materials and/ormanufactured products whether processed ormanufactured by the Seller or not;

"Prepayment" a payment to be made by the Buyer pursuant toCondition 6.2 to be used at the Seller’sdiscretion for the purchase of materials and/ortowards the costs of labour and other costsrelating to the supply of Goods;

"Recommendations the recommendations (if any) relating to thefor Use" storage, handling, application and/or use

of the Goods contained in the published literatureof the Seller (or, if relevant, a Supplier) or anyrecommendations made in Writing by an authorisedrepresentative of the Seller (or, if relevant, aSupplier);

"Seller" Goodfellow Cambridge Limited and anysubsidiary or holding company or associate (assuch terms are defined in the Companies Act 1985(as amended)) of the said company;

"Services" the work or services or any of them to be

provided by the Seller under the Contract;

"Supplier" any person, firm or company who or whichsupplies materials to the Seller which make upthe Goods which are to be supplied to the Buyer;

1.1.2 words importing the singular number shall include the plural andvice versa, words importing one gender shall include all genders,and words importing persons shall include bodies corporate,unincorporated associations and partnerships

1.2 If satisfactory references and information on the Buyer are notprovided within seven days of a request therefore by the Seller, orif, following the provision of such information, the Seller isunable to obtain satisfactory trade indemnity or similar cover inrespect of its dealings with the Buyer, the Seller may terminate theContract and the rights and liabilities of the parties shall be thesame as if the Contract had been cancelled in accordance with theprovisions of Condition 10.2

1.3 The seller reserves the right to assign, sub-contract the Contract orany part thereof. The Buyer shall not be entitled to assign thebenefit or burden of the Contract without the consent in writing ofthe Seller

1.4 In relation to all obligations of the Buyer under these Conditions,the time of performance is of the essence

1.5 The legal construction of these Conditions shall not be effected bytheir headings which are for convenience of reference only

2 ORDERS

2.1 Notwithstanding that the Seller may have given a detailed quotation orestimate either verbally or in writing no order shall be binding on theSeller unless and until it has been acknowledged in writing by theSeller or the Goods are delivered or the Services are provided by theSeller to the Buyer pursuant to the order

2.2 In order to avoid duplication of orders the Buyer shall be responsiblefor ensuring that any confirmation of an order previously placed isprominently marked as being a confirmation and not a new order. TheBuyer acknowledges that any order or confirmation of order which is notso marked may be treated and accepted by the Seller as a new order tocreate a Contract in addition to any Contract arising out of thepreviously placed order

2.3 These Conditions are incorporated in the Contract and together with anymatter set out in the Seller’s quotation or acceptance/acknowledgementof order contain the entire obligations between the Seller and theBuyer. In the case of any inconsistency between any letter or quotationincorporating or referring to these Conditions and any order, letter orform of contract sent by the Buyer to the Seller, whatever may be theirrespective dates, the provisions of these Conditions shall prevail. Inthe event of the Seller entering into the Contract without the Sellerhaving submitted a written quotation or other letter or documentincorporating or referring to these Conditions but in circumstanceswhere the Buyer has had prior notice of these Conditions then allGoods or Services supplied shall be subject to these Conditions

2.4 No variation of the Contract by the Buyer shall be binding upon theSeller unless made in Writing and signed on behalf of the Seller. Inthe event of such variation the Buyer shall indemnify and keepindemnified the Seller in full against all loss, which term shallinclude (but without prejudice to the generality thereof) loss ofprofit, costs (including the cost of labour and materials), damages,charges and expenses incurred (directly or indirectly) by the Selleras a result of such variation

2.5 Any representations (except fraudulent misrepresentations) orwarranties made by or on behalf of the Seller prior to the Contract(whether verbally or in writing) are hereby expressly excluded andshall be of no effect

3 DESCRIPTION

3.1 Any figures, statements, descriptions, illustrations, photographs,drawings, weights or any other matters contained in the Seller’scatalogues, pamphlets, price lists or advertising literature are notguaranteed to be accurate and are intended merely to represent ageneral picture of the Seller’s products and shall not form part ofthe Contract nor be regarded as a warranty or representation relatingto the Goods or Services

3.2 The Seller reserves the right to amend the specification of itsproducts and services from time to time so that the descriptionsthereof as set out in its catalogues, pamphlets, price lists oradvertising literature may not be identical with those set out in theSeller’s quotation and the Buyer is advised to check the specificationset out in the Seller’s quotation before placing an order

4 SPECIFICATIONS AND INTELLECTUAL PROPERTY

4.1 Where goods are supplied to the Buyer’s own specification, or wherestandard goods of the Seller are altered in accordance with the Buyer’sinstructions the Buyer warrants and undertakes full responsibility forthe suitability and fitness of the specification, pattern or design butalso that such specification, pattern or design does not infringe anypatent, trade mark, registered design, copyright or any otherproprietary right of any third party and the Buyer shall indemnify andkeep the Seller idemnified in full against any loss, damage or expensewhatsoever (including costs) which the Seller may incur in or arisingfrom the performance of the Contract by reason of any infringement ofany such patent, trade mark, registered design, copyright or any otherproprietary right

4.2 The Seller reserves the right to change the Buyer’s specification asrequired to ensure that the Goods comply with any health, safety orother statutory requirement or provision and no such change by theSeller will constitute a breach of contract or impose upon the Sellerany liability whatsoever

4.3 Unless otherwise agreed in writing, the Seller will be the sole ownerof all inventions, formulations, tools, patterns, designs or othersimilar items and the copyright in all documents and drawings made orproduced by it in preparing a quotation for the Buyer or in the courseof work on any Contract with the Buyer

5 QUOTATIONS

5.1 The Seller’s quotations are provisional in so far as they are subjectto alteration by reference to any changes in the price of rawmaterials, any item to be acquired by the Seller from a third party,rates of wages, other costs of production and any other circumstancesbeyond the Seller’s control taking place between the date of thequotation and the Buyer’s placing of an order in respect thereof

6 PRICE

6.1 The Seller shall be entitled to adjust the Contract price of the Goodsor Services whether before or after the making of the Contract in theevent of any variation in the cost to the Seller of supplying the sameor any part thereof caused by:-6.1.1 any increase in the cost of materials required by

the Seller for the completion of the Contract; or6.1.2 any increase in wages or production and manufacturing costs or

other overheads; or6.1.3 any other reason whatsoever beyond the control of the Seller

including (but without prejudice to the generality of theforegoing) fluctuations in exchange rates between monetarycurrencies the action of any government or any other authorityor any labour problems

6.2 In the Seller’s absolute discretion, a Prepayment in respect of theContract may be required to be paid by the Buyer to the Seller on theterms set out in this Condition. The Prepayment shall be applied asfollows:-

6.2.1 in the event that the Contract is performed in full by bothparties the Prepayment shall be retained by the Seller inreduction of the total price payable by the Buyer under theContract;

6.2.2 in the event that the Buyer is either in default of any of itsobligations under the Contract or cancels or suspends theContract in accordance with Condition 10 the Prepayment shall beset off by the Seller against its proper costs losses or damagesarising in connection with the default and/or cancellation orsuspension

6.3 Unless otherwise stated, the price set out in the Seller’s quotationincludes the cost of packaging, carriage, and (save as provided inCondition 6.4) insurance. In respect of supplies of Goods in the UnitedStates of America, Canada and Japan the price also includes importduties and sales taxes (if any). In respect of supplies of Goods inother countries the price does not include import duties or VAT orsales taxes which will be extra charges based on prevailing rates

6.4 Where the Buyer requests a particular means of delivery, the price setout in the Seller’s quotation does not include insurance, which is tobe arranged at the responsibility of the Buyer.

7 DELIVERY

7.1 Delivery of Goods shall be deemed to be effected by the Seller at thefollowing times:-

7.1.1 where Goods are collected by or on behalf of the Buyer by itsservants or agents, or where Goods are collected in



Conditions of Sale

February 2009

accordance with a means of delivery specifically requested bythe Buyer, when the same are collected;

7.1.2 where delivery of the Goods is to be the responsibility of theSeller, when they arrive prior to unloading at the Buyer’spremises;

7.1.3 where Goods are sold FOB or CIF, when they pass the ship’s railor are loaded onto the aircraft

7.2 Delivery of Services shall be deemed to be effected by the Seller atthe time of completion by the Seller of the Services

7.3 Whilst the Seller will make every reasonable effort to complete theContract by the date or dates therein specified for delivery of Goodsor provision of Services such date or dates shall only constitute thetimes by which the Seller expects to effect such delivery and if notime is agreed delivery will be within a reasonable time but theperformance of the Contract by the Seller shall not be the essence ofthe Contract, the Seller’s failure to so deliver by the due date ordates shall not constitute a breach of Contract and the Seller shallnot in any circumstances be responsible for any direct orconsequential loss or damage of any kind whatsoever resultingtherefrom. The Seller may wholly or partly suspend deliveries of Goodsor provision of Services and the Buyer shall accept late delivery ofsuch Goods or Services unless the Buyer has cancelled the Contract inaccordance with the provisions of Condition 10.3

8 QUANTITIES INSTALMENTS AND STORAGE

8.1 Where Goods are delivered or Services are by instalment each instalmentshall be deemed to be sold under a separate Contract and the party indefault in respect of any instalment shall be liable accordingly, butno default in respect of any one instalment shall effect dueperformance of the Contract as regards other instalments

8.2 The Seller will endeavour to deliver the quantity of Goods ordered andevery delivery shall be deemed to comply with the order. If there is asurplus or shortage of Goods which is no more than 10% of the quantityspecified in the order the Buyer shall be deemed to have accepted theGoods and shall pay for the actual quantity delivered

8.3 If Goods or Services are to be delivered by instalments, the Sellershall be entitled to invoice each instalment as and when delivery ismade and payment for all delivered instalments shall be duenotwithstanding the non-delivery of other instalments or other defaultby the Seller. Failure by the Buyer to make payment by the due date forany one instalment for whatever reason shall entitle the Seller tosuspend deliveries of Goods or provision of Services under the Contractbut without prejudice to any other right the Seller may have under anyof the other provisions of these Conditions

8.4 Notwithstanding that risk shall have passed to the Buyer pursuant toCondition 15 the Seller may in its absolute discretion arrange forstorage of the Goods either at the request of the Buyer or as a resultof the failure by the Buyer to take delivery of the Goods underCondition 7. The Seller may insure the goods whilst in storage and theBuyer shall indemnify and keep indemnified the Seller in full againstall costs, losses, damages and expenses whatsoever arising inconnection with the storage provided for hereunder and such costs,losses, damages and expenses will be added to and form part of theprice of the Goods

8.5 Unless otherwise agreed between the Buyer and the Seller, the Sellershall be entitled in its absolute discretion and without giving priornotice to the Buyer at the expiration of 3 months to sell or otherwisedispose of Goods kept in storage as provided in Condition 8.4

9 TERMS OF PAYMENT

9.1 Unless otherwise agreed the price shall be due and payable at theSeller’s offices 30 days after the date of the Seller’s invoice

9.2 If the Buyer does not pay the whole or any part of the price on therequired day then the Buyer shall pay to the Seller on requestinterest on the amount outstanding from the required day until theactual date of payment at the rate of 2% p.a. over the base rate ofBarclays Bank plc from time to time in force which shall accrue on adaily basis

9.3 Condition 12 shall apply in the event of any alleged defect or failurein or of the Goods or Services and the Buyer shall not delay or refuseto make payment in any such event

9.4 The Buyer shall not be entitled to withold payment of any amount due tothe Seller by reason of any disputed claim by the Buyer in connectionwith the Contract nor shall the Buyer be entitled to set off againstany amount payable under the Contract to the Seller any amount whichis not then due and payable by the Seller or for which the Sellerdisputes liability

9.5 All payments payable to the Seller under the Contract shall become dueimmediately upon termination of the Contract despite any otherprovision.

10 SUSPENSION AND CANCELLATION

10.1 If the Buyer shall commit any breach of the Contract and fail to remedythe same within 7 days of receiving the Seller’s request in writing soto do or any distress or execution is levied upon any goods orproperty of the Buyer or the Buyer makes any voluntary arrangement withits creditors or becomes subject to an administration order or (beingan individual or firm) becomes bankrupt or (being an incorporatedcompany) passes a resolution for winding up (otherwise than for thepurpose of amalgamation or reconstruction), or a Court makes an orderto that effect, or an encumbrancer takes possession, or anadministrative receiver or receiver is appointed, of any of theproperty or assets of the Buyer, or the Buyer ceases, or threatens tocease, to carry on business or is unable to pay its debts within themeaning of section 123 Insolvency Act, 1986, or the Seller reasonablyapprehends that any of the events mentioned above is about to occur inrelation to the Buyer and notifies the Buyer accordingly, the Sellermay:-10.1.1 stop any Goods in transit and suspend any further deliveries;

and/or

10.1.2 suspend work on the Contract; and/or10.1.3 determine the Contract forthwith and if the Goods or Services,

or any part of them have been delivered but not paid for, theprice shall become immediately due and payable notwithstandingany previous agreement to the contrary but without prejudice tothe Seller’s right to any unpaid price for Goods or Servicesdelivered under the Contract and to damages for loss (bothdirect and consequential) suffered in consequence of suchdetermination

10.2 If the Buyer requires cancellation of the Contract this will only beaccepted at the sole discretion of the Seller and unless otherwiseagreed in writing only upon condition that any costs, charges orexpenses (both direct and consequential) incurred by the Seller up tothe date of cancellation and the value of all loss or damage (bothdirect and consequential) incurred by the Seller by reason of suchcancellation will be reimbursed by the Buyer to the Seller forthwith.Acceptance by the Seller of any cancellation by the Buyer will only bebinding upon the Seller if it is made in writing

10.3 In the event of the Seller other than in any of the circumstances setout in Condition 10.1 being prevented or hindered from completing theContract either wholly or in part in accordance with the terms thereoffor any reason whatsoever beyond its reasonable control which, for theavoidance of doubt and without prejudice to the generality of theforegoing, shall include governmental action, war, riot, civilcommotion, fire, flood, epidemic, labour disputes (including labourdisputes involving the work force or any part thereof of the Seller orSupplier), restraints or delays affecting shipping or carriers,licensing, exporting or importing restrictions, currency restrictionsand Acts of God then further performance of the Contract shall besuspended for the period during which the Seller is so preventedprovided that in the event of the Contract being suspended for acontinuous period of more than 3 months then either party may give theother notice in writing to terminate the Contract forthwith and in suchcircumstances the Buyer shall pay for all Goods or Services supplied tothe date of such termination such payment to be made on or before thelast day following the month during which termination was effected.The Seller shall be under no liability whatsoever to the Buyer for anydirect or consequential loss or damage suffered by the Buyer as aresult of the Seller’s inability to perform its obligations under theContract in these circumstances

10.4 The Seller’s rights contained in Condition 17 (but not the Buyer’srights) shall continue beyond the discharge of the parties’ primaryobligations under the Contract consequent upon its termination

10.5 The termination of the Contract for whatever reason will be withoutprejudice to the rights and duties of either party accrued prior totermination

11 INSPECTION AND CLAIMS FOR DEFECTS

11.1 The Goods are of a highly specialised nature and must be treated withthe utmost care. It is essential that the Buyer checks that theycorrespond in all respects with the Buyer’s requirements. Anydiscrepancies should be notified to the Seller immediately. The Buyerundertakes to ensure that all Goods are unpacked and handled only bypersons qualified to deal with such specialised products, to safeguardagainst injury to the Goods or to the Buyer’s personnel

11.2 The Buyer shall inspect the Goods and carry out tests to ensure theGoods conform with the description of the Goods or Services in theBuyer’s orders within 7 days of Delivery and whether or not the Buyercarries out such obligation to inspect and test no claims fornon-delivery, shortages in quantity of units delivered, defectiveGoods or Services, non-conformity to description or partial loss ordamage to Goods will be accepted by the Seller unless:-

11.2.1 they are notified in writing by the Buyer to the Seller within10 days after the Date of Delivery (in the case of partial loss,damage, non-conforming or defective Goods or Services) or 14days after the date of the invoice (in the case ofnon-delivery);

11.2.2 the Goods in respect of which a claim is made together with allthe relevant packing are preserved intact as received for aperiod of 35 days from notification of any such claim and theBuyer permits the Seller or its servants or agents full and freeright of access to inspect the Goods and investigate the claim;and

11.2.3 if the Buyer fails to give the appropriate notice as specifiedin Condition 11.2.1, the Buyer’s claim will be deemed to havebeen waived and will be absolutely barred

11.3 It is in all cases the responsibility of the Buyer to ensure by testingor otherwise that the Goods are fit and suitable for the purposes forwhich the Buyer requires them in the conditions in which they will beused. The Buyer acknowledges that the Seller shall be under noliability of any description to the Buyer if the Goods prove to beunsuitable for whatever reason for application or use notwithstandingthat the Seller may, at the request of the Buyer, have given in goodfaith technical or other advice in relation to the proposedapplication or use of the Goods and the Buyer shall indemnify and keepindemnified the Seller in full against any and all liability of anykind arising out of or connected with the application or use of theGoods

11.4 Section 3 Sale and Supply of Goods Act 1994 shall not apply

11.5 The Seller will not accept the return of Goods in any circumstancesunless it has first issued a Goods return number and such number isquoted with the returned Goods

12 WARRANTY

12.1 In substitution for all and any other rights which the Buyer might orwould have had but for these Conditions and subject to Condition 11,



Conditions of Sale

February 2009

the Seller shall make good by replacement any failure in the Goods orServices which results from defects in the Seller’s materials orworkmanship and which appear not later than 2 months after the Date ofDelivery and shall replace any Goods or Services which do not conformwith the description in the Buyer’s order

12.2 Notwithstanding the provisions of Condition 12.1, in the case of aclaim falling within Condition 12.1, the Seller reserves the right atits sole discretion to credit the Buyer in full the price paid by theBuyer to the Seller

12.3 The Seller’s liability under this Condition shall automatically ceaseif:12.3.1 the Buyer has not paid for all Goods or Services supplied under

any Contract by the due date or is otherwise in breach of thisor any other Contract made with the Seller; or

12.3.2 the Seller or its servants or agents are denied full and freeright of access to the allegedly defective Goods; or

12.3.3 the Buyer has not properly maintained the Goods or has notcomplied with any Recommendations for Use; or

12.3.4 the defect or failure is caused by a breach by the Buyer of itsundertakings and warranties contained in Condition 17; or

12.3.5 the Buyer has failed to notify the Seller in writing of anydefect or suspected defect within 14 days of the same coming tothe knowledge of the Buyer

12.4 The warranty set out in Condition 12.1 shall be in lieu of anywarranties conditions or undertakings whether express or implied bystatute, common law or otherwise howsoever which warranties, conditionsand undertakings are hereby expressly excluded, except that suchexclusions will not apply to any implied condition that the Seller hasor will have the right to sell the Goods when the property is to pass

12.5 Nothing in these Conditions excludes or limits the liability of theSeller for death or personal injury caused by the Seller’s negligenceor fraudulent misrepresentation

12.6 SUBJECT TO CONDITIONS 12.4 AND 12.512.6.1 the seller’s total liability in contract, tort (including

negligence or breach of statutory duty), misrepresentation orotherwise , arising in connection with the performance orcontemplated performance of the contract shall be limited to theprice paid for the goods or services under the contract; and

12.6.2 the seller shall not be liable to the buyer for any indirect orconsequential loss or damage (whether for loss of profit, lossof business, depletion of goodwill or otherwise), costs,expenses or other claims for consequential compensationwhatsoever (however caused) which arise out of or in connectionwith the contract

13 CONSUMER SALES

13.1 Where the Goods are sold under a consumer sale (as defined by the Saleof Goods Act 1979) the statutory rights of the Buyer are not affectedby these conditions

14 TITLE TO GOODS

14.1 Full legal and beneficial ownership of the Goods shall be retained bythe Seller notwithstanding that the risk in the same shall pass to theBuyer at the time of delivery until the Seller has received payment infull in respect of14.1.1 The Goods; and14.1.2 All other sums which become due and owing by the Buyer to the

Seller on any account whatsoever

14.2 Until ownership of the Goods has passed to the Buyer the Buyer shallhold the Goods in a fiduciary capacity and as bailee of the Seller andshall at all times take proper care of the same and will not obliterateor obscure any identifying mark or their packaging and will keep theGoods separate from any other goods and in such manner that they may beclearly identified as belonging to the Seller and the Buyer herebygrants to the Seller the right to enter on the Buyer’s premises at anytime during the continuation of the Contract to check that the Buyer iscomplying with the obligation contained in this Condition. The Buyerwill return the Goods to the Seller if it receives a request whetherverbally or in Writing so to do prior to payment in full as aforesaidhaving been made and the Seller will then repay any part of thepurchase price it has already received in respect of the Goods less areasonable amount in respect of its costs and expenses in connectionwith the Contract

14.3 For the purposes of Condition 14.1, the expression "the Buyer" includesany subsidiary or holding company or associate of the Buyer (as suchterms are defined in the Companies Act 1985 (as amended))

14.4 The Seller will have the right to maintain an action against the Buyerfor the price of the Goods notwithstanding that property in the Goodshas not been passed

15 RISK AND INSURANCE

15.1 The risk in the Goods shall pass to the Buyer at the time of deliveryas provided for in Condition 7

15.2 Notwithstanding the reservation of title contained in Condition 14,the Buyer shall insure the Goods and/or any products made wholly orpartly therefrom for the full amount of the price payable under theContract with an insurance office of repute from the time of deliveryof the Goods until the date title in the Goods passes to the Buyerpursuant to Condition 14.1

16 EXPORT TERMS

16.1 In these Conditions "Incoterms" means the international rules for theinterpretation of trade terms of the International Chamber of Commerce

as in force at the date when the Contract is made. Unless the contextotherwise requires, any term or expression which is defined in or givena particular meaning by the provisions of Incoterms has the samemeaning in the Contract

16.2 Where the Goods are supplied for export from the United Kingdom thenunless otherwise agreed in writing between the Buyer and the Seller

16.2.1 the provisions of Incoterms shall (subject to any special termsagreed in writing between the Buyer and the Seller) apply but ifthere is any conflict between the provisions of Incoterms andthese Conditions, the latter shall prevail.

16.2.2 the Buyer shall be responsible for complying with anylegislation or regulations governing the importation of theGoods into the country of destination and (save in respect ofthe United States of America, Canada and Japan) for the paymentof any duties and taxes thereon unless payment for these isincluded in the Contract

16.2.3 the Buyer shall be deemed to have satisfied itself that suchGoods comply with the safety regulations of any country orstate in which the Goods are to be used outside the UnitedKingdom and the Buyer shall indemnify and keep indemnified theSeller in full for any loss or damage whatsoever which theSeller may incur if such Goods do not comply with such safetyregulations

16.3 The Goods shall not be used in any country other than that for whichthe Seller was aware they were originally ordered without the Seller’sconsent in writing

16.4 The Buyer undertakes not to offer the Goods for resale in any countrynotified by the Seller at or before the time the Buyer’s order isplaced, or to sell the Goods to any person if the Buyer knows or hasreason to believe that person intends to resell the Goods in any suchcountry

17 BUYER’S WARRANTIES

17.1 The Buyer warrants to the Seller that:17.1.1 the Buyer will install, operate or otherwise use or store the

Goods strictly in accordance with the Recommendations for Useand with all relevant or applicable statutory or otherregulations governing the installation, operation, use orstorage of the Goods; and

17.1.2 any collection vehicle, container, ship or other means oftransport provided by the Buyer or any agent of the Buyer willcomply with all relevant legislation and regulations relating tohealth and safety requirements; and

17.1.3 the storage and transport facilities and all parts thereof andall equipment used in connection therewith is suitable forstorage (both short term and long term) and transport of theGoods and complies with any statute, regulation, bye law orother rule having the force of law and relating to the storageof goods of the nature of the Goods; and

17.1.4 the Buyer will ensure that the Goods are stored in conditionsappropriate to goods of that nature and will comply with anyrecommendations as to the storage of Goods notified to it by theSeller from time to time; and

17.2 The Buyer shall indemnify and keep indemnified the Seller in fullagainst any claim, loss or damage (including, without limitation,damage to the reputation of the Seller) arising directly or indirectlyfrom any breach of the warranty contained in Condition 17.1

18 SEVERANCE

18.1 If at any time any one or more of the provisions or part thereof ofthese Conditions becomes or is invalid, illegal or unenforceable in anyrespect under any law or is held by a court to be invalid, illegal orunenforceable, the validity and enforceability of the remainingprovisions hereof and the remainder of such provision shall not in anyway be affected or impaired thereby

19 JURISDICTION

19.1 These Conditions and each and every Contract made pursuant to themshall be governed by and construed in all respects in accordance with thelaws of England and the Seller and the Buyer hereby agree to submit to thenon-exclusive jurisdiction of the English Courts

20 NOTICES

20.1 Any notice required or permitted to be given by either party to theother under these Conditions shall be in writing addressed to thatother party at its registered office or principal place of business orsuch other address as may at the relevant time have been notifiedpursuant to this provision to the party giving notice

20.2 Any notice given pursuant to clause 20.1 shall be deemed to have beenserved:20.2.1 if delivered by hand, on the first Business Day following

delivery;20.2.2 if sent by post, on the third Business Day after posting if the

address of the recipient is in the country of despatch,otherwise on the seventh Business Day after posting;

20.2.3 if sent by facsimile transmission, on the first Business Dayfollowing successful transmission

20.3 In proving service it shall be sufficient proof in the case of anotice sent by post, that the envelope containing the same was properlystamped, addressed and placed in the post and, in the case of facsimiletransmission, that it was properly addressed and successfullytransmitted

20.4 In this Condition 20, "Business Day" shall mean any day other thanSaturday, Sunday or any other day which is a public holiday in theplace at which the notice is left or to which such notice isdespatched

21 WAIVER



Conditions of Sale

February 2009

21.1 No waiver by the Seller of any breach of any provision of the Contractby the Buyer shall be considered as a waiver of any subsequent breach

of the same or any other provision and the Seller shall not beprejudiced by any forbearance or indulgence granted by it to the Buyer



Conditions of Sale

February 2009

Acrylonitrile/Methylacrylate copolymer

Barex1 - impact modified copolymer

Common Brand Names : BarexPhysical Properties Chemical ResistanceDensity 1.15 g cm-3 Acids - concentrated Good

Acids - dilute GoodThermal Properties Alcohols GoodHeat-deflection temperature - 0.45MPa 77 C Alkalis GoodHeat-deflection temperature - 1.8MPa 69 C Aromatic hydrocarbons GoodThermal conductivity @^C 0.17 W m-1 K-1 Greases and Oils Good

Ketones FairMechanical PropertiesIzod impact strength approx.100 J m-1

Tensile modulus approx.3 GPaTensile strength 66 MPa

SheetAN303200

T Xi

Thickness . . . . . . . . . . . . . . 2mm

QuantityWeb Code Size 1pc 2pcs 5pcs721-016-524 60 x 60 mm CAD 228.00 CAD 286.00 CAD 417.00

GranuleAN306300

T Xi

Nominal Granule Size . . . . 5mm

QuantityWeb Code Weight 1 Pot591-821-840 100 g CAD 208.00434-052-427 200 g CAD 239.00374-103-423 500 g CAD 310.00327-037-680 1000 g CAD 405.00330-133-362 2000 g CAD 563.00

Cellulose

Regenerated Cellulose

Common Brand Names : Cellophane, Rayophane

All forms of cellulose degrade before they melt but natural cellulose can be regenerated by the xanthate process tomanufacture fibres, commonly called rayon or viscose, and film, commonly called by its earliest brand nameCellophane1. The latter films are plasticised by glycols and water to overcome their brittleness and are transparent,colourless and of moderate crystallinity. They were very widely used for packaging but have been substantially replacedby synthetic thermoplastics, especially polypropylene.

They have very high permeability to moisture and, especially when dry, very low permeabiltiy to permanent gases. Theirmoisture content varies greatly with their environment reaching approximately 50% at 100% relative humidity. Notsurprisingly, this causes many of their properties to vary considerably - so summarised values must be treated withconsiderable caution.

Physical Properties Thermal PropertiesDensity 1.44 g cm-3 Specific heat ~ 1400 J K-1 kg-1

Limiting oxygen index ~ 18 %Radiation resistance Fair Mechanical PropertiesWater absorption - equilibrium 50 % Elongation at break 18/55 %

Tensile modulus 5/3 GPaElectrical Properties Tensile strength 120/55 MPaDielectric constant @1MHz 4 (dry)Dielectric strength 30-50 @ 1mm kV mm-1 Chemical ResistanceDissipation factor @ 1kHz 0.06 Acids - dilute GoodVolume resistivity 1010 - 1012 Ohmcm Alkalis Good

Greases and Oils Good

Polymer–Acrylonitrile/Methylacrylate

copolymer

18

Goodfellow Cambridge Limited Ermine Business Park, Huntingdon PE29 6WR England

Telephone +44 1480 424 800 : Fax +44 1480 424 900

Printed prices are correct as at May 20 2011. For current prices see www.goodfellow.com#Goodfellow Cambridge Limited

Cellulose


FilmExtension to break -Longitudinal

% 18

Extension to break -Transverse

% 55

Permeability to CarbonDioxide @25C

x10-13 cm3. cm cm-2 s-1 Pa-1 0.004-0.05

Permeability to Hydrogen@25C

x10-13 cm3. cm cm-2 s-1 Pa-1 0.01-0.05

Permeability to Nitrogen@25C

x10-13 cm3. cm cm-2 s-1 Pa-1 0.02-0.06

Permeability to Oxygen@25C

x10-13 cm3. cm cm-2 s-1 Pa-1 0.004-0.04

Permeability to Water @25C x10-13 cm3. cm cm-2 s-1 Pa-1 approx 20,000

Tensile modulus -Longitudinal

GPa 5

Tensile modulus -Transverse

GPa 3

Tensile strength -Longitudinal

MPa 120

Tensile strength - Transverse MPa 55

AC321020

F Xi

Thickness . . . . . . . . . . . . . . 0.021mm Coil width . . . . . . . . . . . . . . 250mm

Coil Width 250mm QuantityWeb Code Length 1 Reel088-321-917 0.5 m CAD 150.00762-816-998 1 m CAD 156.00352-116-752 2 m CAD 167.00014-597-629 5 m CAD 197.00824-706-524 10 m CAD 244.00

AC321030

F Xi



AC321040

F Xi

Thickness . . . . . . . . . . . . . . 0.042mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs826-326-419 520 x 610 mm CAD 156.00 CAD 188.00 CAD 265.00 CAD 323.00

AC321088

F Xi

Thickness . . . . . . . . . . . . . . 0.09mm Condition. . . . . . . . . . . . . . . Vegetable parchmentCoating . . . . . . . . . . . . . . . . Uncoated

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs885-831-143 300 x 300 mm CAD 123.00 CAD 158.00 CAD 252.00 CAD 398.00 CAD 679.00

Coil Width 600mm QuantityWeb Code Length 1 Reel590-296-787 0.5 m CAD 184.00015-844-680 1 m CAD 235.00462-534-828 2 m CAD 326.00

Weight : 80g/m2.

AC321090

F Xi

Thickness . . . . . . . . . . . . . . 0.09mm Condition. . . . . . . . . . . . . . . Vegetable parchmentCondition. . . . . . . . . . . . . . . Silicone coated on both sides



Weight : 85g/m2.

Polymer–Cellulose

19


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Cellulose


FiberMaterial Medium tenacity rayon

Coefficient of thermalexpansion

x10-6 K-1 ~80

Density g cm-3 1.5 - 1.55

Extension to break % 20 - 40

Specific Modulus cN/tex 300 - 700

Tenacity cN/Tex 13 - 23

Thermal Conductivity @23C W m-1 K-1 ~0.06

AC325717

F Xi

Tex Number . . . . . . . . . . . . 16.7 Filament Diameter . . . . . . . 0.015mmNumber of Filaments . . . . . 60 Condition. . . . . . . . . . . . . . . Medium Tenacity

QuantityWeb Code Length 1 Reel315-735-594 100 m CAD 163.00594-047-650 200 m CAD 191.00002-773-544 500 m CAD 274.00668-716-593 1000 m CAD 410.00

Cellulose Acetate

CA

Common Brand Names : Clarifoil, Dexel, Tenite Acetate

General Description : An amorphous, transparent and colorless, glossy and reasonably hard thermoplastic with goodclarity but only moderate UV stability and chemical resistance. Its high moisture absorption can lead to the normaldifficulties of dimensional changes.

Applications include spectacle frames, tool and brush handles and packaging including stiff thin-walled tubes for "displaypackaging". Films are widely used for graphics purposes and are available from stock in selected thicknesses (and otherthicknesses as special orders).

Physical Properties Mechanical PropertiesDensity 1.3 g cm-3 Abrasive resistance - ASTM D1044 65 mg/1000 cyclesFlammability HB Hardness - Rockwell 34-125Limiting oxygen index 19 % Izod impact strength 100-450 J m-1

Radiation resistance Fair Tensile modulus 1.0-4.0 GPaRefractive index 1.49 Tensile strength 12-110 MPaResistance to Ultra-violet FairWater absorption - over 24 hours 1.9-7.0 % Chemical Resistance

Acids - concentrated PoorElectrical Properties Acids - dilute Good-PoorDielectric constant @1MHz ~5 Alcohols Fair-PoorDielectric strength 11 kV mm-1 Alkalis PoorDissipation factor @ 1kHz 0.06 Aromatic hydrocarbons Good-PoorVolume resistivity 5 x 1012 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Good-PoorThermal Properties Halogens PoorCoefficient of thermal expansion 80-180 x10-6 K-1 Ketones PoorHeat-deflection temperature - 0.45MPa 52-105 CHeat-deflection temperature - 1.8MPa 48-86 CLower working temperature -20 CSpecific heat 1200-1900 J K-1 kg-1

Thermal conductivity @23C 0.16-0.36 W m-1 K-1

Upper working temperature 55-95 C

FilmDissipation Factor @1MHz 0.038

Elongation at Break % 15-55

Heat-sealing Temperature C 176-232

Initial Tear Strength g mm-1 0.018-0.036


x10-13 cm3. cm cm-2 s-1 Pa-1 17


x10-13 cm3. cm cm-2 s-1 Pa-1 2.5


x10-13 cm3. cm cm-2 s-1 Pa-1 0.2


x10-13 cm3. cm cm-2 s-1 Pa-1 0.6

Permeability to Water @25C x10-13 cm3. cm cm-2 s-1 Pa-1 4000-5000

AC311025

F Xi


Coil Width 300mm QuantityWeb Code Length 1 Reel224-183-220 1 m CAD 138.00611-774-061 2 m CAD 148.00680-047-726 5 m CAD 169.00933-019-611 10 m CAD 196.00352-562-254 20 m CAD 240.00

Polymer–Cellulose

20


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Cellulose Acetate

CA

Film

AC311050

F Xi

Thickness . . . . . . . . . . . . . . 0.050mm


Coil Width 735mm QuantityWeb Code Length 1 Reel836-386-159 1 m CAD 232.00749-231-067 2 m CAD 272.00274-232-335 5 m CAD 358.00

AC311075

F Xi

Thickness . . . . . . . . . . . . . . 0.075mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs390-697-602 150 x 150 mm CAD 132.00 CAD 141.00 CAD 160.00 CAD 187.00 CAD 234.00837-208-864 300 x 300 mm CAD 145.00 CAD 158.00 CAD 188.00 CAD 226.00 CAD 291.00


AC311200

F Xi

Thickness . . . . . . . . . . . . . . 0.20mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs138-038-811 150 x 150 mm CAD 144.00 CAD 169.00 CAD 229.00 CAD 329.00217-392-603 300 x 300 mm CAD 177.00 CAD 218.00 CAD 394.00


AC311250

F Xi

Thickness . . . . . . . . . . . . . . 0.25mm



AC311400

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs430-198-729 150 x 150 mm CAD 158.00 CAD 189.00 CAD 276.00 CAD 451.00707-500-322 300 x 300 mm CAD 208.00 CAD 316.00 CAD 639.00886-350-995 600 x 600 mm CAD 499.00 CAD 898.00

Metallized FilmAC311850

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm Coil width . . . . . . . . . . . . . . 300mmOhms/Square . . . . . . . . . . . 0.2 Metallized with . . . . . . . . . . Aluminum


Polymer–CelluloseAcetate

21


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Cellulose Acetate Butyrate

CAB

Common Brand Names : Cellidor B, Tenite Butyrate

General Description : An amorphous, transparent thermoplastic similar to cellulose acetate but more expensive andtougher with better weathering resistance and lower moisture absorption.

Applications are also similar with the addition of goggles and signs and the exclusion of graphics films.

The light control sheets available from stock can be thought of as miniature Venetian blinds encapsulated between plainCAB films.

Physical Properties Mechanical PropertiesAbbe number 80-84 Elongation at break 60 %Density 1.20 g cm-3 Hardness - Rockwell 99Flammability HB Izod impact strength 260 J m-1

Limiting oxygen index 17 % Tensile modulus 0.3-2.0 GPaRadiation resistance Fair Tensile strength 20-60 MPaRefractive index 1.478Resistance to Ultra-violet Good Chemical ResistanceWater absorption - over 24 hours 0.9-2.2 % Acids - dilute Fair-Poor

Alcohols PoorElectrical Properties Alkalis Fair-PoorDielectric constant @1MHz 2.5-6.2 Aromatic hydrocarbons PoorDielectric strength 10 kV mm-1 Greases and Oils Good-PoorDissipation factor @ 1kHz 0.04 Halogenated Hydrocarbons PoorVolume resistivity 1011-1015 Ohmcm Halogens Poor

Ketones PoorThermal PropertiesCoefficient of thermal expansion 140 x10-6 K-1

Heat-deflection temperature - 0.45MPa 73 CHeat-deflection temperature - 1.8MPa 62 CLower working temperature <-40 CThermal conductivity @23C 0.16-0.32 W m-1 K-1


SheetAC303025

F Xi

Thickness . . . . . . . . . . . . . . 0.25mm

QuantityWeb Code Size 1pc 2pcs 5pcs629-546-468 100 x 100 mm CAD 127.00 CAD 151.00 CAD 171.00332-389-974 150 x 150 mm CAD 136.00 CAD 164.00 CAD 192.00560-554-729 250 x 250 mm CAD 154.00 CAD 190.00069-349-346 500 x 500 mm CAD 200.00

AC303050

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm


AC303075

F Xi

Thickness . . . . . . . . . . . . . . 0.762mm Condition. . . . . . . . . . . . . . . Light-control sheet

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs150-464-775 25 x 25 mm CAD 153.00 CAD 180.00 CAD 248.00 CAD 313.00808-094-435 50 x 50 mm CAD 181.00 CAD 220.00 CAD 312.00 CAD 402.00011-800-669 100 x 100 mm CAD 238.00 CAD 300.00 CAD 438.00 CAD 581.00475-080-609 150 x 150 mm CAD 294.00 CAD 380.00 CAD 565.00 CAD 981.00385-083-961 300 x 300 mm CAD 464.00 CAD 746.00 CAD 1701.00

Total viewing angle : 90 degrees

AC303080

F Xi

Thickness . . . . . . . . . . . . . . 0.762mm Condition. . . . . . . . . . . . . . . Light-control sheet

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs135-498-330 25 x 25 mm CAD 169.00 CAD 197.00 CAD 266.00 CAD 332.00937-298-537 50 x 50 mm CAD 199.00 CAD 238.00 CAD 332.00 CAD 425.00162-317-995 100 x 100 mm CAD 258.00 CAD 322.00 CAD 465.00 CAD 624.00289-746-403 150 x 150 mm CAD 317.00 CAD 405.00 CAD 634.00 CAD 1106.00218-311-062 300 x 300 mm CAD 494.00 CAD 849.00 CAD 1936.00

Total viewing angle : 60 degrees

AC303100

F Xi

Thickness . . . . . . . . . . . . . . 1mm


TubeAC307300

F Xi

Outside Diameter . . . . . . . . 3.0mm Wall Thickness . . . . . . . . . . 0.75mmInside Diameter . . . . . . . . . 1.5mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs288-880-605 1200 mm CAD 149.00 CAD 170.00 CAD 223.00 CAD 305.00 CAD 372.00


Butyrate

22


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Cellulose Acetate Butyrate

CAB

GranuleAC306300

F Xi

Nominal Granule Size . . . . 3mm Color . . . . . . . . . . . . . . . . . . Natural


Cyclo-olefin copolymer

Topas1

Physical Properties Thermal PropertiesAbbe number 58 Coefficient of thermal expansion 60 x10-6 K-1

Density 1.02 g cm-3 Heat-deflection temperature - 0.45MPa 130 CFlammability HB Thermal conductivity @^C 0.16 W m-1 K-1

Optical transmission 92-94 %Radiation resistance Good Mechanical PropertiesRefractive index 1.53 Elongation at break 3 %Resistance to Ultra-violet Fair-Poor Tensile modulus 3.1 GPaWater absorption <0.01 % Tensile strength 66 MPa

Electrical Properties Chemical ResistanceSurface resistivity 1014 Ohm/sq Acids - dilute GoodVolume resistivity 1012 Ohmcm Alcohols Good

Alkalis GoodGreases and Oils Fair-Poor

GranuleET356301

T Xi



ET356300

T Xi




Butyrate

23


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Ethylene-Chlorotrifluoroethylene copolymer

E-CTFE

Common Brand Names : Halar

General Description : A very expensive, melt processable, semi-crystalline, whitish semi-opaque thermoplastic withgood chemical resistance and barrier properties. It also has good tensile and creep properties and good high frequencyelectrical characteristics.

Applications include chemically resistant linings, valve and pump components, barrier films and release/vacuum baggingfilms.

Physical Properties Mechanical PropertiesDensity 1.68 g cm-3 Abrasive resistance - ASTM D1044 5 mg/1000 cyclesFlammability V0 Coefficient of friction 0.07-0.08Limiting oxygen index 60 % Elongation at break 200 %Radiation resistance Fair Hardness - Rockwell R95Water absorption - over 24 hours <0.02 % Izod impact strength <1000 J m-1

Tensile modulus 1.4-1.6 GPaElectrical Properties Tensile strength 48 MPaDielectric constant @1MHz 2.3-2.5Dielectric strength 40 kV mm-1 Chemical ResistanceDissipation factor @ 1kHz 0.002 Acids - concentrated GoodSurface resistivity 1014-1015 Ohm/sq Acids - dilute GoodVolume resistivity 1015-1016 Ohmcm Alcohols Good

Alkalis GoodThermal Properties Aromatic hydrocarbons GoodCoefficient of thermal expansion 80 x10-6 K-1 Greases and Oils GoodHeat-deflection temperature - 0.45MPa 115 C Halogenated Hydrocarbons Good-FairHeat-deflection temperature - 1.8MPa 75 C Halogens GoodLower working temperature -75 C Ketones GoodThermal conductivity @23C 0.16 W m-1 K-1


FilmDielectric Strength @25mmthick

kV mm-1 196-236

Dissipation Factor @1MHz 0.013



Initial Tear Strength g mm-1 47


x10-13 cm3. cm cm-2 s-1 Pa-1 0.4


x10-13 cm3. cm cm-2 s-1 Pa-1 0.04


x10-13 cm3. cm cm-2 s-1 Pa-1 0.1

Permeability to Water @38C x10-13 cm3. cm cm-2 s-1 Pa-1 150

FP331125

T Xi

Thickness . . . . . . . . . . . . . . 0.0125mm


Coil Width 610mm QuantityWeb Code Length 1 Reel147-745-539 0.5 m CAD 238.00779-769-273 1 m CAD 276.00471-151-096 2 m CAD 331.00893-882-194 5 m CAD 448.00

FP331250

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm



FP331300

T Xi

Thickness . . . . . . . . . . . . . . 0.125mm



Polymer–Ethylene-Chlorotrifluoroethylenecopolymer

24


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Ethylene-Tetrafluoroethylene Copolymer

ETFE

Common Brand Names : Tefzel, Hostaflon ET

An expensive, semi-crystalline, melt processable thermoplastic that is essentially a 1:1 alternating copolymer of ethyleneand tetrafluorethylene. It has a very high impact strength even at low temperatures and is relatively stiff by fluoropolymerstandards, but its chemical resistance, though good, is not as good as that of PTFE.

It is used for chemical apparatus and process equipment, vessel linings and wire coatings.

Physical Properties Mechanical PropertiesDensity 1.7 g cm-3 Elongation at break 250-350 %Flammability V0 Hardness - Rockwell R50Limiting oxygen index 30-32 % Izod impact strength >1000 J m-1

Radiation resistance Fair Tensile modulus 0.8 GPaRefractive index 1.403 Tensile strength 28-48 MPaResistance to Ultra-violet ExcellentWater absorption 0-0.03 % Chemical Resistance

Acids - concentrated GoodElectrical Properties Acids - dilute GoodDielectric constant @1MHz 2.6 Alcohols GoodDielectric strength 25 kV mm-1 Alkalis GoodDissipation factor @ 1MHz 0.0005 Aromatic hydrocarbons GoodSurface resistivity >1014 Ohm/sq Greases and Oils GoodVolume resistivity 1016 Ohmcm Halogenated Hydrocarbons Good

Halogens GoodThermal Properties Ketones GoodCoefficient of thermal expansion 90-170 x10-6 K-1

Heat-deflection temperature - 0.45MPa 105 CHeat-deflection temperature - 1.8MPa 70 CLower working temperature <-100 CSpecific heat 1900-2000 J K-1 kg-1

Thermal conductivity @23C 0.24 W m-1 K-1


FilmPermeability to CarbonDioxide @25C

x10-13 cm3. cm cm-2 s-1 Pa-1 3


x10-13 cm3. cm cm-2 s-1 Pa-1 0.2


x10-13 cm3. cm cm-2 s-1 Pa-1 0.6


FP361025

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm



FP361125

T Xi

Thickness . . . . . . . . . . . . . . 0.125mm



MeshFP368703

T Xi

Nominal Aperture . . . . . . . . 85mm Monofil diameter . . . . . . . . 80mmThreads/cm . . . . . . . . . . . . 60.7 Open area . . . . . . . . . . . . . 26.5%Type . . . . . . . . . . . . . . . . . . Plain weave mesh

QuantityWeb Code Size 1pc 2pcs 5pcs634-453-508 250 x 250 mm CAD 290.00 CAD 391.00 CAD 551.00823-552-836 500 x 500 mm CAD 454.00 CAD 679.00

FP368705

T Xi

Nominal Aperture . . . . . . . . 300mm Monofil diameter . . . . . . . . 200mmThreads/cm . . . . . . . . . . . . 20 Open area . . . . . . . . . . . . . 36%Type . . . . . . . . . . . . . . . . . . Plain weave mesh


Polymer–Ethylene-TetrafluoroethyleneCopolymer

25


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Ethylene-Tetrafluoroethylene Copolymer

ETFE

Mesh

FP368710

T Xi

Nominal Aperture . . . . . . . . 1000mm Monofil diameter . . . . . . . . 500mmThreads/cm . . . . . . . . . . . . 6.7 Open area . . . . . . . . . . . . . 44%Type . . . . . . . . . . . . . . . . . . Plain weave mesh


RodFP367920

T Xi

Diameter . . . . . . . . . . . . . . . 11mm

QuantityWeb Code Length 1pc 2pcs 5pcs830-400-494 100 mm CAD 160.00 CAD 205.00 CAD 295.00694-910-769 300 mm CAD 237.00 CAD 334.00 CAD 754.00871-779-980 900 mm CAD 472.00 CAD 889.00

FP367930

T Xi

Diameter . . . . . . . . . . . . . . . 19mm

QuantityWeb Code Length 1pc 2pcs 5pcs736-227-854 100 mm CAD 223.00 CAD 294.00 CAD 567.00504-680-143 300 mm CAD 359.00 CAD 665.00697-895-935 900 mm CAD 968.00

FP367990

T Xi

Diameter . . . . . . . . . . . . . . . 80mm

QuantityWeb Code Length 1pc 2pcs439-180-279 25 mm CAD 679.00 CAD 1282.00912-328-617 50 mm CAD 1230.00

Fluorinated Ethylene Propylene Copolymer

FEP

Common Brand Names : Teflon FEP, Hostaflon FEP

General Description : A semi-crystalline perfluorinated polymer closely related to PTFE (FP30) being a copolymer oftetrafluoroethylene and hexafluoropropylene. Its properties are similar, but generally a little inferior to, those of PTFE butit has the great practical advantage of being melt-processable (though more expensive).

Compared in more detail to PTFE, it has similarly excellent chemical resistance and electrical properties (up to very highfrequencies) and good weathering resistance. It has better radiation resistance and much higher impact strength but haslower maximum use and heat deflection temperatures and is even a little less stiff and strong. Though not quite crystalclear, it is transparent (essentially from 250/300 to 7000nm) and colourless or with a slight bluish tinge.

Applications include coatings and protective linings, chemical and medical equipment, extruded insulation and glazingfilm for solar panels.

Physical Properties Mechanical PropertiesDensity 2.15 g cm-3 Coefficient of friction 0.27-0.67Flammability V0 Elongation at break 150-300 %Limiting oxygen index 95 % Hardness - Rockwell R25-45, 60 Shore DRadiation resistance Poor Izod impact strength No break J m-1

Refractive index 1.344 Poisson’s ratio 0.48Resistance to Ultra-violet Excellent Tensile modulus 0.5 - 0.6 GPaWater absorption 0.01 % Tensile strength 14 - 30 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 2.1 Acids - concentrated GoodDielectric strength 20 @ 3.2mm kV mm-1 Acids - dilute GoodDissipation factor @ 1MHz 0.0007 Alcohols GoodSurface resistivity 1016 Ohm/sq Alkalis GoodVolume resistivity 1018 Ohmcm Aromatic hydrocarbons Good

Greases and Oils GoodThermal Properties Halogenated Hydrocarbons GoodCoefficient of thermal expansion 83 - 104 x10-6 K-1 Halogens GoodHeat-deflection temperature - 0.45MPa 50 C Ketones GoodHeat-deflection temperature - 1.8MPa 70 CLower working temperature -250 CSpecific heat 1100 J K-1 kg-1

Thermal conductivity @23C 0.19 - 0.24 W m-1 K-1

Upper working temperature 150 - 200 C

Polymer–Ethylene-TetrafluoroethyleneCopolymer

26


Telephone +44 1480 424 800 : Fax +44 1480 424 900



FEP


x10-13 cm3. cm cm-2 s-1 Pa-1 10


x10-13 cm3. cm cm-2 s-1 Pa-1 10


x10-13 cm3. cm cm-2 s-1 Pa-1 1


x10-13 cm3. cm cm-2 s-1 Pa-1 3



FP341025

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm



FP341050

T Xi

Thickness . . . . . . . . . . . . . . 0.05mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs298-646-490 150 x 150 mm CAD 146.00 CAD 167.00 CAD 220.00 CAD 279.00 CAD 381.00330-801-834 300 x 300 mm CAD 173.00 CAD 206.00 CAD 281.00 CAD 365.00


FP341075

T Xi

Thickness . . . . . . . . . . . . . . 0.075mm


Coil Width 610mm QuantityWeb Code Length 1 Reel749-706-696 0.5 m CAD 249.00337-265-283 1 m CAD 300.00

FP341100

T Xi

Thickness . . . . . . . . . . . . . . 0.1mm



FP341250

T Xi

Thickness . . . . . . . . . . . . . . 0.25mm



FP341400

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm



FP341440

T Xi

Thickness . . . . . . . . . . . . . . 1.0mm

QuantityWeb Code Size 1pc 2pcs 5pcs715-884-702 150 x 150 mm CAD 232.00 CAD 310.00 CAD 417.00485-589-986 300 x 300 mm CAD 339.00 CAD 493.00698-740-376 600 x 600 mm CAD 794.00

Polymer–FluorinatedEthylenePropyleneCopolymer

27


Telephone +44 1480 424 800 : Fax +44 1480 424 900



FEP

Film

FP341470

T Xi

Thickness . . . . . . . . . . . . . . 2.3mm

QuantityWeb Code Size 1pc 2pcs342-549-858 150 x 150 mm CAD 284.00 CAD 384.00818-734-905 300 x 300 mm CAD 496.00

SheetFP343300

T Xi

Thickness . . . . . . . . . . . . . . 3mm

QuantityWeb Code Size 1pc 2pcs891-869-012 150 x 150 mm CAD 311.00 CAD 589.00

MonofilamentFP345925

T Xi

Diameter . . . . . . . . . . . . . . . 0.28mm


RodFP347905

T Xi

Diameter . . . . . . . . . . . . . . . 3mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs980-551-311 300 mm CAD 104.00 CAD 128.00 CAD 179.00 CAD 241.00305-350-626 600 mm CAD 125.00 CAD 158.00 CAD 226.00462-509-958 900 mm CAD 141.00 CAD 181.00 CAD 266.00

FP347910

T Xi

Diameter . . . . . . . . . . . . . . . 9.5mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs531-438-040 300 mm CAD 166.00 CAD 216.00 CAD 396.00 CAD 741.00436-690-190 600 mm CAD 213.00 CAD 320.00 CAD 726.00194-063-033 900 mm CAD 251.00 CAD 453.00

FP347930

T Xi

Diameter . . . . . . . . . . . . . . . 25mm


Polymer–FluorinatedEthylenePropyleneCopolymer

28


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Hexafluoropropylenevinylidenefluoride copolymer

FKM

Common Brand Names : Fluorel

General Description : A range of fluoropolymer elastomers whose formulation can be tailored to a reasonable extent tomeet the needs of individual end-uses. They have high heat, oil and chemical resistance but indifferent low temperatureperformance. With the exception of Kalrez1 perfluorinated elastomer, they are about the most highly temperatureresistant of all commercially available elastomers.

Their main applications are seals, O-rings and linings.

NOTE As normally formulated, they are black and semi-conducting. We stock two items which are specially formulatedand not black; these are insulating.

Physical Properties Mechanical PropertiesDensity 2.0 g cm-3 Compression set after 24 hr at 175C 43 %Flammability Self Extinguishing Elongation at break 200 %Radiation resistance Poor Hardness - Rockwell Shore A75Resistance to Ultra-violet Excellent Tear strength 10 N mm-1

Tensile strength 9 MPaThermal PropertiesCoefficient of thermal expansion 160 x10-6 K-1 Chemical ResistanceLower working temperature -10 to -50 C Acids - concentrated Good-FairThermal conductivity @23C 0.2 W m-1 K-1 Acids - dilute GoodUpper working temperature 220 to 300 C Alcohols Good-Fair

Alkalis Good-FairAromatic hydrocarbons Good-FairGreases and Oils Good-FairHalogenated Hydrocarbons Good-FairHalogens GoodKetones Poor

SheetFV313051

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm Color . . . . . . . . . . . . . . . . . . GreenType . . . . . . . . . . . . . . . . . . Non-conducting


FV313050

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm Color . . . . . . . . . . . . . . . . . . BlackType . . . . . . . . . . . . . . . . . . Semi-conducting


This item normally derives its’ color from the addition of Carbon and we emphasise that the Electrical Properties displayed in the datatable do NOT apply to this item.

FV313100

T Xi



All dimensions are nominal. This item normally derives its’ color from the addition of Carbon and we emphasise that the ElectricalProperties displayed in the data table do NOT apply to this item.

FV313150

T Xi

Thickness . . . . . . . . . . . . . . 1.5mm Color . . . . . . . . . . . . . . . . . . WhiteType . . . . . . . . . . . . . . . . . . Non-conducting


FV313300

T Xi




SphereFV316820

T Xi

Diameter . . . . . . . . . . . . . . . 3.18mm Color . . . . . . . . . . . . . . . . . . BlackType . . . . . . . . . . . . . . . . . . Semi-conducting

QuantityWeb Code Spheres 1 Pot589-782-650 20 pcs CAD 248.00722-830-576 50 pcs CAD 453.00353-820-892 100 pcs CAD 818.00


Polymer–Hexafluoropropylenevinylidenefluoridecopolymer

29


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Poly L lactic acid - Biopolymer

PLLA

Physical Properties Mechanical PropertiesDensity 1.25 g cm-3 Elongation at break 2.4 %Resistance to Ultra-violet Good Tensile modulus 3.6 GPaWater absorption - equilibrium 0.3 % Tensile strength 70 MPa

FilmME331050

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm



GranuleME336310

F Xi


QuantityWeb Code Weight 1 Pot426-849-475 100 g CAD 205.00420-219-089 200 g CAD 234.00012-433-581 500 g CAD 296.00225-017-527 1000 g CAD 362.00

Polyacrylamide/acrylate

Hydrogel

Common Brand Names : Aridall, Broadleaf, Hydrogel

General Description : A copolymer of acrylamide and acrylic acid (normally supplied as the sodium salt) that is cross-linked sufficiently to render it insoluble in water but which retains its hydrophilic nature. It therefore can absorb a verylarge amount of water, swelling proportionately as it does so. The amount of water that can be absorbed is typicallyaround 400x the weight of polymer if the water is completely free of solutes, decreasing quite markedly as the level ofsolute(s) increases.

Its applications include horticulture, hygiene products like disposable diapers and inummerable odd jobs around thelaboratory.

Physical Properties Chemical ResistanceDensity ~1.5 g cm-3 Acids - dilute Good-Fair

Alcohols GoodAlkalis FairAromatic hydrocarbons GoodHalogenated Hydrocarbons Good

GranuleAC336310

Xi

Nominal Granule Size . . . . 2.5mm


Polyacrylonitrile

PAN

Physical PropertiesDensity 1.18 g cm-3

Polymer–PolyLlacticacid

-Biopolymer

30


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyacrylonitrile

PAN

PowderAN316010

T Xi

Mean Particle size . . . . . . . 50micron Condition. . . . . . . . . . . . . . . Copolymer (99.5% AN / 0.5% MA)


Polyacrylonitrile-butadiene-styrene

ABS

Common Brand Names : Cycolac, Lustran, Novodur, Ronfalin

General Description : An amorphous, off-white/greyish engineering thermoplastic that is relatively hard and reasonablytough (maintained at low temperatures). It is manufactured in a wide range of grades tailored to individual end-useswhich can vary appreciably in copolymer ratios. Generally they are easily processed and bonded but have poor solventand fatigue resistance and poor UV resistance (unless stabilized or protected).

Applications include cabinets and casings, baths, shower trays, pipes, boat hulls and vehicle components.

Physical Properties Mechanical PropertiesDensity 1.05 g cm-3 Coefficient of friction 0.5Flammability HB @ 1.5mm Elongation at break 45 %Limiting oxygen index 19 % Hardness - Rockwell R100-110Radiation resistance Fair Izod impact strength 200-400 J m-1

Resistance to Ultra-violet Poor Poisson’s ratio 0.35Water absorption - over 24 hours 0.3-0.7 % Tensile modulus 2.1-2.4 GPa

Tensile strength 41-45 MPaElectrical PropertiesDielectric constant @1MHz 3.2 - 3.3 Chemical ResistanceDielectric strength 20-25 kV mm-1 Acids - concentrated Good-PoorDissipation factor @ 1MHz 0.02 Acids - dilute GoodVolume resistivity >1015 Ohmcm Alcohols Good-Poor

Alkalis GoodThermal Properties Aromatic hydrocarbons PoorCoefficient of thermal expansion 80 x10-6 K-1 Greases and Oils GoodHeat-deflection temperature - 0.45MPa 98 C Halogenated Hydrocarbons PoorHeat-deflection temperature - 1.8MPa 89 C Halogens PoorThermal conductivity @23C 0.17 W m-1 K-1 Ketones PoorUpper working temperature 70-100 C

SheetAB303090

T Xi

Thickness . . . . . . . . . . . . . . 0.85mm Color . . . . . . . . . . . . . . . . . . White

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs385-996-995 100 x 100 mm CAD 137.00 CAD 164.00 CAD 232.00 CAD 334.00612-339-043 175 x 175 mm CAD 158.00 CAD 194.00 CAD 279.00 CAD 400.00425-938-010 350 x 350 mm CAD 207.00 CAD 263.00 CAD 389.00

Surface finish : Haircell on one side & smooth on other side.

AB303100

T Xi

Thickness . . . . . . . . . . . . . . 1.0mm Color . . . . . . . . . . . . . . . . . . Black

QuantityWeb Code Size 1pc 2pcs 5pcs890-412-047 150 x 150 mm CAD 144.00 CAD 174.00 CAD 248.00708-461-393 300 x 300 mm CAD 179.00 CAD 224.00 CAD 327.00860-800-577 600 x 600 mm CAD 250.00 CAD 323.00

AB303150

T Xi



AB303300

T Xi



AB303400

T Xi



Polymer–Polyacrylonitrile

31


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyacrylonitrile-butadiene-styrene

ABS

RodAB307910

T Xi

Diameter . . . . . . . . . . . . . . . 10mm Color . . . . . . . . . . . . . . . . . . Natural

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs245-324-446 100 mm CAD 123.00 CAD 139.00 CAD 177.00 CAD 225.00 CAD 309.00665-557-939 200 mm CAD 131.00 CAD 151.00 CAD 196.00 CAD 252.00194-737-673 500 mm CAD 148.00 CAD 175.00 CAD 235.00342-206-180 1000 mm CAD 168.00 CAD 203.00

AB307925

T Xi

Diameter . . . . . . . . . . . . . . . 25mm


Polyamide - Nylon 4, 6

PA 4,6

Common Brand Names : Stanyl

See also General information under Nylon 6

General Description : A semi-crystalline, yellowish engineering thermoplastic that is often colored brick red. It hashigher crystallinity and better chemical resistance than nylon 6 or 6,6 and similar water absorption, though the associateddimensional change is less. Compared to other (aliphatic) nylons it has much better retention of properties at elevatedtemperatures, reportedly because of the "highly symmetrical" polymer chain and its relatively high concentration ofamide groups (four methylene groups in both the acid and the amine segments).

Applications are broadly similar to other nylons - engineering, electrical and electronic components particularly thoseexposed to (sustained) high temperatures.

Physical Properties Thermal PropertiesDensity 1.18 g cm-3 Coefficient of thermal expansion 80-90 x10-6 K-1

Flammability V2 @ 0.8mm Heat-deflection temperature - 0.45MPa 220 CLimiting oxygen index 24 % Heat-deflection temperature - 1.8MPa 160 CRadiation resistance Fair Lower working temperature -40 CWater absorption - equilibrium 3.7 % Thermal conductivity @23C 0.30 W m-1 K-1

Water absorption - over 24 hours 1.3 % Upper working temperature 100-200 C

Electrical Properties Mechanical PropertiesDielectric constant @1MHz 3.8-4.3 Hardness - Rockwell M92Dielectric strength 20 kV mm-1 Izod impact strength 80 J m-1

Dissipation factor @ 1kHz 0.35 Tensile modulus 3.1-3.3 GPaSurface resistivity 1012-1014 Ohm/sq Tensile strength 55-100 MPaVolume resistivity 1013-1015 Ohmcm

FilmAM341025

Xi

Thickness . . . . . . . . . . . . . . 0.025mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs126-494-734 100 x 100 mm CAD 160.00 CAD 186.00 CAD 255.00 CAD 361.00811-843-727 150 x 150 mm CAD 171.00 CAD 201.00 CAD 279.00480-471-932 300 x 300 mm CAD 202.00 CAD 245.00 CAD 348.00058-988-978 600 x 600 mm CAD 264.00 CAD 334.00

SheetAM343100

Xi

Thickness . . . . . . . . . . . . . . 10mm


FiberAM345724

Xi

Tex Number . . . . . . . . . . . . 24 Filament Diameter . . . . . . . 0.027mmNumber of Filaments . . . . . 36 Condition. . . . . . . . . . . . . . . High Tenacity

QuantityWeb Code Length 1 Reel543-182-921 100 m CAD 149.00724-149-529 200 m CAD 172.00019-135-090 500 m CAD 241.00568-818-287 1000 m CAD 354.00308-052-084 2000 m CAD 577.00

Polymer–Polyacrylonitrile-butadiene-styrene

32


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 4,6

RodAM347910

Xi

Diameter . . . . . . . . . . . . . . . 10mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs227-254-244 100 mm CAD 210.00 CAD 250.00 CAD 337.00 CAD 438.00 CAD 732.00406-780-500 200 mm CAD 243.00 CAD 296.00 CAD 410.00847-569-090 500 mm CAD 307.00 CAD 387.00946-125-854 1000 mm CAD 379.00

AM347925

Xi

Diameter . . . . . . . . . . . . . . . 50mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs936-593-380 50 mm CAD 363.00 CAD 474.00 CAD 873.00 CAD 1600.00265-733-952 100 mm CAD 449.00 CAD 694.00 CAD 1516.00216-740-776 200 mm CAD 669.00 CAD 1209.00092-587-673 500 mm CAD 1441.00

Polyamide - Nylon 6

PA 6

Common Brand Names : Akulon K and F, Capron, Maranyl B, Nylacast, Orgamid, Ultramid B

See also General Information under Nylon 6,6.

General Description : A semi-crystalline, white engineering thermoplastic very similar to nylon 6,6 with which it is inmany respects interchangeable. Its melt viscosity is not quite as low as 6,6 so it is generally slightly easier to process andoften preferred for moulding. Relative to 6,6 it has somewhat higher impact strength but somewhat lower strength andstiffness and higher water absorption (the highest of all nylons).

It can be monomer cast, commonly called just cast - ie.polymerized in a mould direct to a semi-fabricated shape. Thisallows the production of thick sections without voiding and gives a product with a slightly different balance of properties -a little stronger and stiffer, slightly reduced extensibility and impact strength.

Its applications are similar to those of nylon 6,6.

Physical Properties Mechanical PropertiesDensity 1.13 g cm-3 Abrasive resistance - ASTM D1044 5 mg/1000 cyclesFlammability HB Coefficient of friction 0.2-0.3Limiting oxygen index 25 % Hardness - Rockwell M82Radiation resistance Fair Izod impact strength 30-250 J m-1

Refractive index 1.53 Poisson’s ratio 0.39Resistance to Ultra-violet Poor Tensile modulus 2.6-3.0 GPaWater absorption - equilibrium >8 % Tensile strength 78 MPaWater absorption - over 24 hours 2.7 %

Chemical ResistanceElectrical Properties Acids - concentrated PoorDielectric constant @1MHz 3.6 Acids - dilute PoorDielectric strength 25 kV mm-1 Alcohols GoodDissipation factor @ 1kHz 0.2 Alkalis Good-FairSurface resistivity 5x1010 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 5x1012 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Good-PoorThermal Properties Halogens PoorCoefficient of thermal expansion 95 x10-6 K-1 Ketones GoodHeat-deflection temperature - 0.45MPa 200 CHeat-deflection temperature - 1.8MPa 80 CLower working temperature -40 CSpecific heat 1700 J K-1 kg-1



Polymer–Polyamide-Nylon

4,6

33


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6

PA 6

FilmDielectric Constant @ 1MHz 2.7

Dielectric Strength @25mmthick

kV mm-1 56



Extension to break -Longitudinal

% 375-500 - crystalline, 60-70 - monax.


% 375-500 - crystalline, 400-450 - monax.



x10-13 cm3. cm cm-2 s-1 Pa-1 0.06


x10-13 cm3. cm cm-2 s-1 Pa-1 0.007


x10-13 cm3. cm cm-2 s-1 Pa-1 0.03


Shrinkage % <3 @ 150C - cryst , 8-15/1-2 @ 200C - monax.


MPa 70-110 - crystalline, 290-320 - monax.

Tensile strength - Transverse MPa 70-110 - crystalline, 90-110 - monax.

AM301015

Xi

Thickness . . . . . . . . . . . . . . 0.015mm Color . . . . . . . . . . . . . . . . . . ColorlessOriented . . . . . . . . . . . . . . . Uni-axially oriented

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs 100pcs970-090-506 100 x 100 mm CAD 156.00 CAD 183.00 CAD 233.00 CAD 377.00 CAD 610.00261-314-077 150 x 150 mm CAD 162.00 CAD 191.00 CAD 245.00 CAD 397.00 CAD 637.00664-250-470 300 x 300 mm CAD 181.00 CAD 217.00 CAD 282.00 CAD 455.00031-301-754 600 x 600 mm CAD 217.00 CAD 269.00 CAD 356.00

Coil Width 600mm QuantityWeb Code Length 1 Reel912-716-626 1 m CAD 156.00089-579-649 2 m CAD 195.00197-461-314 5 m CAD 295.00682-667-837 10 m CAD 443.00

AM301025

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Color . . . . . . . . . . . . . . . . . . Light blueCondition. . . . . . . . . . . . . . . Heat stabilized

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs 100pcs333-486-189 100 x 100 mm CAD 172.00 CAD 204.00 CAD 262.00 CAD 422.00 CAD 672.00685-769-909 150 x 150 mm CAD 184.00 CAD 222.00 CAD 288.00 CAD 462.00 CAD 729.00721-244-114 300 x 300 mm CAD 223.00 CAD 276.00 CAD 365.00 CAD 584.00


Lay-flat tubing which may be slit along one edge to give a coil of twice the width having a center crease.

AM301026

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Color . . . . . . . . . . . . . . . . . . ColorlessOriented . . . . . . . . . . . . . . . Uni-axially oriented

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs 100pcs053-670-237 100 x 100 mm CAD 178.00 CAD 221.00 CAD 301.00 CAD 526.00 CAD 884.00708-785-051 150 x 150 mm CAD 191.00 CAD 239.00 CAD 327.00 CAD 566.00 CAD 941.00598-136-463 300 x 300 mm CAD 229.00 CAD 294.00 CAD 403.00 CAD 688.00767-059-157 600 x 600 mm CAD 306.00 CAD 402.00


AM301050

Xi

Thickness . . . . . . . . . . . . . . 0.05mm Condition. . . . . . . . . . . . . . . Heat stabilized





6

34


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6

PA 6

Film

AM301075

Xi

Thickness . . . . . . . . . . . . . . 0.075mm Condition. . . . . . . . . . . . . . . Crystalline



AM301100

Xi

Thickness . . . . . . . . . . . . . . 0.1mm Color . . . . . . . . . . . . . . . . . . ColorlessCondition. . . . . . . . . . . . . . . Crystalline

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs 100pcs040-070-788 150 x 150 mm CAD 175.00 CAD 228.00 CAD 306.00 CAD 528.00 CAD 883.00008-845-941 300 x 300 mm CAD 198.00 CAD 260.00 CAD 352.00 CAD 600.00

AM301200

Xi



AM301250

Xi

Thickness . . . . . . . . . . . . . . 0.25mm

QuantityWeb Code Size 1pc611-045-412 150 x 150 mm CAD 114.00

AM301350

Xi

Thickness . . . . . . . . . . . . . . 0.35mm



AM301400

Xi

Thickness . . . . . . . . . . . . . . 0.5mm



SheetAM303010

Xi

Thickness . . . . . . . . . . . . . . 1mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs694-682-057 100 x 100 mm CAD 113.00 CAD 121.00 CAD 140.00 CAD 167.00 CAD 205.00835-254-851 150 x 150 mm CAD 119.00 CAD 129.00 CAD 154.00 CAD 186.00406-851-047 300 x 300 mm CAD 137.00 CAD 155.00 CAD 198.00856-375-590 500 x 500 mm CAD 161.00 CAD 198.00

AM303020

Xi

Thickness . . . . . . . . . . . . . . 2mm


AM303050

Xi

Thickness . . . . . . . . . . . . . . 5mm



6

35


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6

PA 6

Sheet

AM303100

Xi

Thickness . . . . . . . . . . . . . . 10mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs909-192-221 100 x 100 mm CAD 138.00 CAD 157.00 CAD 197.00 CAD 276.00649-026-968 150 x 150 mm CAD 157.00 CAD 183.00 CAD 279.00128-364-049 300 x 300 mm CAD 234.00 CAD 369.00045-508-808 500 x 500 mm CAD 469.00

AM303300

Xi

Thickness . . . . . . . . . . . . . . 10mm Condition. . . . . . . . . . . . . . . Oil-filled Nylon ’6’


Impregnated with oil to decrease further the coefficient of friction

MonofilamentAM305915

Xi

Diameter . . . . . . . . . . . . . . . 0.15mm Condition. . . . . . . . . . . . . . . Nylon 6/66 copolymer


AM305925

Xi



AM305938

Xi



AM305950

Xi



AM305970

Xi



AM305990

Xi


QuantityWeb Code Length 1 Reel533-606-146 50 m CAD 156.00700-763-473 100 m CAD 191.00595-437-474 200 m CAD 252.00

RodAM307902

Xi

Diameter . . . . . . . . . . . . . . . 2mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs902-826-743 1000 mm CAD 100.00 CAD 108.00 CAD 128.00 CAD 156.00

AM307903

Xi

Diameter . . . . . . . . . . . . . . . 3mm



6

36


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6

PA 6

Rod

AM307905

Xi

Diameter . . . . . . . . . . . . . . . 5mm


AM307907

Xi

Diameter . . . . . . . . . . . . . . . 6mm Color . . . . . . . . . . . . . . . . . . BlackContains . . . . . . . . . . . . . . . 3-5% MoS2


AM307910

Xi

Diameter . . . . . . . . . . . . . . . 10mm

QuantityWeb Code Length 1pc 2pcs 5pcs870-855-250 1000 mm CAD 120.00 CAD 136.00 CAD 170.00

AM307913

Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs552-457-312 500 mm CAD 117.00 CAD 131.00 CAD 163.00 CAD 209.00057-173-253 1000 mm CAD 127.00 CAD 146.00 CAD 190.00

AM307914

Xi

Diameter . . . . . . . . . . . . . . . 15mm


AM307917

Xi

Diameter . . . . . . . . . . . . . . . 20mm

QuantityWeb Code Length 1pc 2pcs 5pcs680-859-954 500 mm CAD 144.00 CAD 169.00 CAD 249.00723-855-331 1000 mm CAD 165.00 CAD 209.00

AM307918

Xi



AM307916

Xi

Diameter . . . . . . . . . . . . . . . 25mm


AM307928

Xi

Diameter . . . . . . . . . . . . . . . 50mm Condition. . . . . . . . . . . . . . . Oil-filled Nylon ’6’


May suffer from residual stress, use a pilot hole when machining.

AM307926

Xi

Diameter . . . . . . . . . . . . . . . 50mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs567-970-267 200 mm CAD 155.00 CAD 192.00 CAD 345.00 CAD 599.00996-276-091 500 mm CAD 206.00 CAD 322.00

AM307950

Xi




AM307951

Xi

Diameter . . . . . . . . . . . . . . . 100mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs923-410-431 100 mm CAD 295.00 CAD 489.00 CAD 1073.00426-303-087 200 mm CAD 555.00 CAD 1009.00


6

37


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6

PA 6

Rod

AM307975

Xi




AM307990

Xi

Diameter . . . . . . . . . . . . . . . 150mm

QuantityWeb Code Length 1pc 2pcs 5pcs483-056-845 50 mm CAD 268.00 CAD 341.00 CAD 630.00382-105-654 100 mm CAD 318.00 CAD 483.00 CAD 1021.00763-207-836 200 mm CAD 460.00 CAD 796.00 CAD 1804.00400-977-634 500 mm CAD 930.00 CAD 1736.00 CAD 4153.00122-210-311 1000 mm CAD 1713.00 CAD 3302.00

TubeAM307006

Xi


LengthWeb Code667-896-137945-626-461870-409-864695-690-721195-128-519

AM307013

Xi


LengthWeb Code422-211-805555-896-319627-528-009252-899-610070-867-759

AM307027

Xi


LengthWeb Code900-138-019800-202-912187-020-537755-502-154117-313-845

AM307030

Xi


LengthWeb Code663-068-094597-413-767374-986-742881-823-332730-427-035

PowderAM306010

Xi

Max. Particle size . . . . . . . 50micron Mean Particle size . . . . . . . 15-20micron


AM306015

Xi

Mean Particle size . . . . . . . 350micron



6

38


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6

PA 6

GranuleAM306300

Xi



This material is Research grade and contains NO additives or stabilisers.

AM306321

Xi


QuantityWeb Code Weight 1 Pot126-933-718 0.5 kg CAD 160.00218-623-805 1 kg CAD 188.00197-607-002 2 kg CAD 238.00027-774-188 5 kg CAD 382.00

Polyamide - Nylon 6 - 30% Glass Fiber Reinforcd

PA 6 30% GFR

RodAN337960

Xi

Diameter . . . . . . . . . . . . . . . 60mm Color . . . . . . . . . . . . . . . . . . Black



6

39


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 6,6

Common Brand Names : Akulon S, Maranyl A, Utramid A, Zytel

General Information for ’Nylons’.A family of similar semi-crystalline engineering thermoplastics generally synthesized from straight chain aliphatic acidsand amines. Each particular nylon is described by one or two numbers eg nylon 6 or 6,6 where the number is thenumber of carbon atoms in the amine and acid monomers. Where a single number is used the monomer is an Alphaamino-acid (or its lactam) and the amide links in the polymer are all "head-to-tail". Where two numbers are used themonomers are a diamine and diacid and the amide links alternate "head-to-tail"/"tail-to-head". The first number refers tothe diamine, the second to the diacid. Some nylons use aromatic monomers which are denoted by letters eg T forterephthalic and I for isophthalic components.

Nylons generally are strong, tough (but notch-sensitive), rather resilient polymers with good barrier properties and highfatigue and abrasion resistance but high water absorption (slow in thick sections) accompanied by an increase indimensions which can be as much as 3% under extreme circumstances. Nylons have good resistance to oils, greases,solvents and alkalis but not to acids which tend to hydrolyse them. The most common nylons are 6 and 6,6 and in theindividual descriptions the others are described in relation to them.

General Description : A semi-crystalline, off-white engineering thermoplastic that is the strongest and most abrasionresistant unreinforced aliphatic nylon with better low temperature toughness than Nylon 6 or acetal. Its very low meltviscosity can give industrial processing difficulties and weathering can cause embrittlement and color change unless it isstabilized or protected. Available with a wide range of fillers , notably glass fiber which gives a marked increase instiffness and solid and liquid (oil) lubricants. Super-tough grades are also available whose impact properties and lownotch sensitivity are amongst the best of all engineering thermoplastics.

Applications include mainly engineering components eg gears, bearings, nuts, bolts, rivets and wheels and power toolcasings and rocker box covers. Widely used as monofilament for brushes etc and fiber, notable for its resilience andhigh abrasion resistance, for apparel, carpet and industrial end-uses.

Physical Properties Mechanical PropertiesDensity 1.14 g cm-3 Abrasive resistance - ASTM D1044 3-5 mg/1000 cyclesFlammability HB Coefficient of friction 0.2-0.3Limiting oxygen index 23 % Hardness - Rockwell M89Radiation resistance Fair Izod impact strength 40-110 J m-1

Refractive index 1.53 Poisson’s ratio 0.41Resistance to Ultra-violet Poor Tensile modulus 3.3 GPaWater absorption - equilibrium 8 % Tensile strength 82 MPaWater absorption - over 24 hours 2.3 %

Chemical ResistanceElectrical Properties Acids - concentrated PoorDielectric constant @1MHz 3.4 Acids - dilute PoorDielectric strength 25 kV mm-1 Alcohols GoodDissipation factor @ 1kHz 0.2 Alkalis Good-FairSurface resistivity 1011 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 1013 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Good-PoorThermal Properties Halogens PoorCoefficient of thermal expansion 90 x10-6 K-1 Ketones GoodHeat-deflection temperature - 0.45MPa 200 CHeat-deflection temperature - 1.8MPa 100 CLower working temperature -30 CSpecific heat 1670 J K-1 kg-1





kV mm-1 34


Elongation at Break % 200

Heat-sealing Temperature C 245


x10-13 cm3. cm cm-2 s-1 Pa-1 0.06


x10-13 cm3. cm cm-2 s-1 Pa-1 0.004


AM321025

Xi

Thickness . . . . . . . . . . . . . . 0.025mm

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs 100pcs180-044-853 150 x 150 mm CAD 142.00 CAD 171.00 CAD 215.00505-608-484 300 x 300 mm CAD 161.00 CAD 199.00



6,6

40


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 6,6

Film

AM321050

Xi

Thickness . . . . . . . . . . . . . . 0.05mm

QuantityWeb Code Size 5pcs 10pcs 20pcs023-049-198 150 x 150 mm CAD 136.00 CAD 163.00 CAD 204.00881-139-118 300 x 300 mm CAD 150.00 CAD 183.00 CAD 231.00142-396-611 600 x 600 mm CAD 177.00 CAD 224.00


AM321250

Xi

Thickness . . . . . . . . . . . . . . 0.25mm



AM321400

Xi

Thickness . . . . . . . . . . . . . . 0.5mm

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs 100pcs669-191-351 50 x 50 mm CAD 127.00 CAD 148.00 CAD 178.00 CAD 262.00 CAD 393.00648-924-929 100 x 100 mm CAD 140.00 CAD 166.00 CAD 204.00 CAD 311.00 CAD 516.00065-508-713 200 x 200 mm CAD 166.00 CAD 203.00 CAD 298.00 CAD 585.00


SheetAM323010

Xi

Thickness . . . . . . . . . . . . . . 1mm


AM323050

Xi

Thickness . . . . . . . . . . . . . . 5mm


AM323100

Xi

Thickness . . . . . . . . . . . . . . 12mm


MeshAM328710

Xi




6,6

41


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 6,6

FiberMaterial Medium High tenacity

Density g cm-3 1.14 1.14

Extension to break % 37 14-22

Shrinkage @100C % 9 9-11

Specific Tenacity cN/tex 43 60-80

AM325705

Xi



Continuous multi-filament yarn

AM325710

Xi




AM325720

Xi

Tex Number . . . . . . . . . . . . 3.3 Filament Diameter . . . . . . . 0.019mmNumber of Filaments . . . . . 10 Condition. . . . . . . . . . . . . . . High Tenacity



AM325750

Xi




AM325790

Xi




RodAM327901

Xi

Diameter . . . . . . . . . . . . . . . 1.6mm

QuantityWeb Code Length 1pc 2pcs 5pcs012-812-935 440 mm CAD 123.00 CAD 142.00 CAD 180.00362-517-609 1000 mm CAD 140.00 CAD 165.00 CAD 217.00376-226-620 1200 mm CAD 145.00 CAD 172.00 CAD 238.00

AM327903

Xi

Diameter . . . . . . . . . . . . . . . 3.2mm


AM327905

Xi

Diameter . . . . . . . . . . . . . . . 5mm


AM327910

Xi

Diameter . . . . . . . . . . . . . . . 10mm



6,6

42


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 6,6

Rod

AM327915

Xi

Diameter . . . . . . . . . . . . . . . 25mm


AM327925

Xi

Diameter . . . . . . . . . . . . . . . 50mm


AM327950

Xi

Diameter . . . . . . . . . . . . . . . 100mm

QuantityWeb Code Length 1pc 2pcs 5pcs501-633-424 50 mm CAD 245.00 CAD 319.00 CAD 492.00909-462-558 100 mm CAD 286.00 CAD 390.00 CAD 755.00682-822-759 200 mm CAD 356.00 CAD 600.00352-842-715 500 mm CAD 672.00

GranuleAM326310

Xi



This material is Research grade and contains NO additives or stabilisers.

AM326315

Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . Super-tough


Super-tough grade - notched Izod : 910 J.m-1.

AM326330

Xi


QuantityWeb Code Weight 1 Pot359-236-751 1 kg CAD 151.00904-599-285 2 kg CAD 193.00074-900-119 5 kg CAD 319.00

SphereAM326810

Xi

Diameter . . . . . . . . . . . . . . . 1.59mm

QuantityWeb Code Spheres 1 Pot963-758-318 50 pcs CAD 153.00469-794-216 100 pcs CAD 182.00724-277-109 200 pcs CAD 226.00534-646-425 500 pcs CAD 335.00

AM326820

Xi

Diameter . . . . . . . . . . . . . . . 3.18mm


AM326840

Xi

Diameter . . . . . . . . . . . . . . . 6mm



6,6

43


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide - Nylon 6, 6 - 30% Glass Fiber Reinforced

PA 6,6 30% GFR

Common Brand Names : Akulon S, Maranyl A, Utramid A, Zytel

See also General Information under Nylon 6,6

General Description : The addition of glass fiber to nylons leads to very significant increases in strength, stiffness, heatdistortion temperatures, abrasion resistance and dimensional stability, though properties can be anisotropic - includingmould shrinkage, leading to potential distortion. In the case of nylon 6,6, unlike many polymers, this is achieved withoutloss of impact strength, though elongation to break is, as usual, reduced very substantially. Glass-reinforced nylon iscommonly colored black.

Applications include many engineering components including "under-bonnet" automobile parts and most componentson wind-surfers.

Physical Properties Mechanical PropertiesDensity 1.4 g cm-3 Elongation at break 5 %Flammability HB Hardness - Rockwell M100Limiting oxygen index 22 % Izod impact strength 120 J m-1

Water absorption - over 24 hours 1-5 % Tensile modulus 10-11 GPaTensile strength 160-210 MPa

Electrical PropertiesDielectric constant @1MHz 3.9-5.7 Chemical ResistanceVolume resistivity 1012-1015 Ohmcm Acids - concentrated Poor

Acids - dilute PoorThermal Properties Alcohols GoodCoefficient of thermal expansion 20-30 x10-6 K-1 Alkalis Good-FairHeat-deflection temperature - 0.45MPa 257 C Aromatic hydrocarbons GoodHeat-deflection temperature - 1.8MPa 252 C Greases and Oils GoodThermal conductivity @23C 0.23 W m-1 K-1 Halogenated Hydrocarbons Good-PoorUpper working temperature 80-200 C Halogens Poor

Ketones Good-Poor

SheetAM363080

Xi

Thickness . . . . . . . . . . . . . . 8mm Color . . . . . . . . . . . . . . . . . . Black


AM363200

Xi



RodAM367910

Xi



AM367930

Xi



Polyamide - Nylon 6, 6 - 30% Carbon Fiber Reinforced

PA 6, 6 - 30% CFR

Physical Properties Mechanical PropertiesDensity 1.28 g cm-3 Elongation at break 2 %Flammability HB Tensile modulus 24 GPaLimiting oxygen index 22 % Tensile strength 260 MPaWater absorption - over 24 hours <0.1 %

Chemical ResistanceElectrical Properties Acids - concentrated PoorSurface resistivity 103 Ohm/sq Acids - dilute PoorVolume resistivity 102 Ohmcm Alcohols Good

Alkalis Good-FairThermal Properties Aromatic hydrocarbons GoodCoefficient of thermal expansion 14 x10-6 K-1 Greases and Oils GoodHeat-deflection temperature - 1.8MPa 260 C Halogenated Hydrocarbons Good-PoorThermal conductivity @^C 0.51 W m-1 K-1 Halogens PoorUpper working temperature 120-200 C Ketones Good-Poor


6,6-30%

GlassFiberReinforced

44


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 6, 6 - 30% CFR

GranuleAM396310

Xi

Nominal Granule Size . . . . 3mm Color . . . . . . . . . . . . . . . . . . Black


Polyamide - Nylon 11

PA 11

Common Brand Names : Rilsan B

See also General Information under Nylon 6,6

General Description : A semi-crystalline, white engineering thermoplastic very similar to nylon 12 whose properties aregenerally slightly inferior. Relative to nylon 6 and 6,6, they both have much lower water absorption (and hence improveddimensional stability and electrical properties) and higher cost. They also have lower impact resistance and somewhatbetter UV resistance.

Applications include hoses for air, petrol or hydraulic fluid and powder coatings as well as mechanical components.

Physical Properties Mechanical PropertiesDensity 1.04 g cm-3 Coefficient of friction 0.2-0.3Flammability V2 Elongation at break 320 %Limiting oxygen index 22 % Hardness - Rockwell M60Radiation resistance Fair Izod impact strength 96 J m-1

Resistance to Ultra-violet Fair? Tensile modulus 1.5 GPaWater absorption - equilibrium 2.5 % Tensile strength 44 MPaWater absorption - over 24 hours 0.8 %

Chemical ResistanceElectrical Properties Acids - concentrated PoorDielectric constant @1MHz 3.0 Acids - dilute Fair-PoorDielectric strength 20 kV mm-1 Alcohols FairDissipation factor @ 1kHz 0.05 Alkalis Good-FairSurface resistivity 1014 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 1014 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Good-PoorThermal Properties Halogens PoorCoefficient of thermal expansion 125 x10-6 K-1 Ketones Good-FairHeat-deflection temperature - 0.45MPa 150 CHeat-deflection temperature - 1.8MPa 55 CLower working temperature -50 CThermal conductivity @23C 0.3 W m-1 K-1


RodAM337913

Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs255-239-956 100 mm CAD 189.00 CAD 230.00 CAD 318.00 CAD 428.00519-920-510 200 mm CAD 223.00 CAD 279.00 CAD 396.00 CAD 655.00467-511-044 500 mm CAD 292.00 CAD 376.00 CAD 746.00508-246-612 1000 mm CAD 370.00 CAD 604.00

AM337915

Xi



AM337925

Xi

Diameter . . . . . . . . . . . . . . . 50mm

QuantityWeb Code Length 1pc 2pcs873-280-193 50 mm CAD 280.00 CAD 359.00759-995-933 100 mm CAD 352.00 P

olymer–Polyamide-Nylon

6,6-30%

CarbonFiberReinforced

45


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 12

Common Brand Names : Rilsan A, Vestamid

General Description : (See also General Information under Nylon 6,6) A semi-crystalline, white engineeringthermoplastic very similar to nylon 11 whose properties are generally slightly superior. Of all the generic unmodifiednylons, it has the lowest water absorption, heat resistance and strength. Relative to nylon 6 and 6,6, they both havemuch lower water absorption (and hence improved dimensional stability and electrical properties) and higher cost. Theyalso have lower impact resistance and somewhat better UV resistance.

Applications include precision engineering components and components that need low temperature toughness.

Physical Properties Mechanical PropertiesDensity 1.02 g cm-3 Elongation at break 290-300 %Flammability HB-V2 Hardness - Rockwell R84-107Limiting oxygen index 21 % Tensile strength 50-55 MPaRadiation resistance FairResistance to Ultra-violet Fair? Chemical ResistanceWater absorption - equilibrium 1.6 % Acids - concentrated Poor

Acids - dilute Fair-PoorElectrical Properties Alcohols FairDielectric constant @1MHz 3.5 @ 100kHz Alkalis Good-FairDielectric strength 26-30 @ 1mm kV mm-1 Aromatic hydrocarbons GoodDissipation factor @ 1kHz 0.06 Greases and Oils GoodSurface resistivity 1013 Ohm/sq Halogenated Hydrocarbons Good-PoorVolume resistivity 1012-1014 Ohmcm Halogens Poor

Ketones Good-FairThermal PropertiesCoefficient of thermal expansion 100-120 x10-6 K-1

Heat-deflection temperature - 0.45MPa 130-135 CHeat-deflection temperature - 1.8MPa 48-55 C

FilmAM371025

Xi

Thickness . . . . . . . . . . . . . . 0.25mm


AM371050

Xi

Thickness . . . . . . . . . . . . . . 0.50mm



SheetAM373080

Xi

Thickness . . . . . . . . . . . . . . 0.8mm


AM373100

Xi

Thickness . . . . . . . . . . . . . . 1mm Condition. . . . . . . . . . . . . . . Machining feedstock


AM373120

Xi

Thickness . . . . . . . . . . . . . . 1.5mm


AM373200

Xi



RodAM377910

Xi

Diameter . . . . . . . . . . . . . . . 10mm


Polymer–Polyamide-Nylon12

46


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PA 12

Rod

AM377925

Xi

Diameter . . . . . . . . . . . . . . . 25.0mm


TubeAM377006

Xi


LengthWeb Code240-437-770640-962-631902-116-323624-559-563367-429-125

PowderAM376010

Xi

Max. Particle size . . . . . . . 50micron Mean Particle size . . . . . . . 25-30micron


Polyamide - Nylon 12 - 30% Glass Fiber Reinforced

PA 12 - 30% GFR

Physical Properties Mechanical PropertiesDensity 1.23 g cm-3 Compressive strength 110 MPaFlammability HB Elongation at break 8 %Resistance to Ultra-violet Good Hardness - Rockwell R110Water absorption - equilibrium 0.6 % Izod impact strength 234 J m-1

Tensile modulus 6 GPaElectrical Properties Tensile strength 105 MPaDielectric constant @1MHz 4Dielectric strength 35 kV mm-1 Chemical ResistanceDissipation factor @ 1MHz 0.04 Acids - concentrated Poor

Acids - dilute Fair-PoorThermal Properties Alcohols FairCoefficient of thermal expansion 20 x10-6 K-1 Alkalis PoorHeat-deflection temperature - 1.8MPa 160 CLower working temperature -78 CThermal conductivity @^C 0.16 W m-1 K-1


RodAN327960

Xi

Diameter . . . . . . . . . . . . . . . 92mm Color . . . . . . . . . . . . . . . . . . Cream


Polymer–Polyamide-Nylon12

47


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide/imide

PAI

Common Brand Names : Kerimid, Torlon1

General Description : Amorphous, strongly colored, high performance polymers with linear predominantly aromaticmolecules of high thermal stability. They are normally melt-processed but, after post-curing, are infusible in their fullyfinished form. If semi-fabricated items are machined, repeated post-curing is recommended if maximum properties are tobe achieved. They have very good high temperature properties (approaching those of polyimides), good wear andradiation resistance, inherently low flammability and smoke emission and the highest strength of any unreinforcedthermoplastic, but are very expensive and attacked by alkalis.

Applications include parts for internal combustion and jet engines, bearings and thrust washers and mechanical,electrical and electronic components.

Physical Properties Mechanical PropertiesDensity 1.42-1.46 g cm-3 Compressive strength 170-220 MPaFlammability V0 Elongation at break 7-15 %Limiting oxygen index 44-45 % Hardness - Rockwell E72-86Radiation resistance Good Izod impact strength 60-140 - notched J m-1

Resistance to Ultra-violet Good Poisson’s ratio 0.38Water absorption - equilibrium 3-4 % Tensile modulus 4.5-6.8 GPaWater absorption - over 24 hours 0.3 % Tensile strength 110-190 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 3.9-5.4 Acids - concentrated Fair-PoorDielectric strength 23 at 1mm kV mm-1 Acids - dilute FairDissipation factor @ 1MHz 0.03-0.042 Alcohols Good-PoorSurface resistivity 8-50 x 1017 Ohm/sq Alkalis PoorVolume resistivity 0.08-2 x 1017 Ohmcm Aromatic hydrocarbons Good

Greases and Oils GoodThermal Properties Halogenated Hydrocarbons Good-PoorCoefficient of thermal expansion 25-31 x10-6 K-1 Halogens Good-PoorHeat-deflection temperature - 1.8MPa 278-9 C Ketones GoodLower working temperature =< -200 CSpecific heat 1000 J K-1 kg-1



SheetAM313050

Xi

Thickness . . . . . . . . . . . . . . 6.0mm Color . . . . . . . . . . . . . . . . . . BrownCondition. . . . . . . . . . . . . . . Electrical grade Grade . . . . . . . . . . . . . . . . . Torlon1 4203


AM313100

Xi

Thickness . . . . . . . . . . . . . . 9.5mm Color . . . . . . . . . . . . . . . . . . BrownCondition. . . . . . . . . . . . . . . Electrical grade Grade . . . . . . . . . . . . . . . . . Torlon1 4203


RodAM317910

Xi

Diameter . . . . . . . . . . . . . . . 2.4mm Color . . . . . . . . . . . . . . . . . . BrownCondition. . . . . . . . . . . . . . . Electrical grade Grade . . . . . . . . . . . . . . . . . Torlon1 4203


AM317940

Xi



AM317980

Xi



AM317990

Xi


QuantityWeb Code Length 1pc 2pcs971-151-936 50 mm CAD 257.00 CAD 331.00353-614-134 100 mm CAD 322.00 CAD 548.00201-771-198 200 mm CAD 539.00

Polymer–Polyamide/imide

48


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyamide/imide

PAI

Rod

AM317995

Xi



SphereAM316820

Xi

Diameter . . . . . . . . . . . . . . . 3.18mm Grade . . . . . . . . . . . . . . . . . Torlon1 4203


Polyaramid

Polyparaphenylene terephthalamide

Common Brand Names : Kevlar, Twaron

General Description : An infusible, wholly aromatic polymer that can strictly be described as nylon T,T - but rarely is.Manufactured only as a fiber (by solution spinning), it has a very high thermal stability and temperature and flameresistance. In contrast to its chemical isomer Nomex1, its tensile properties are up to an order of magnitude greater thanthose of normal textile fibers, because of a high degree of molecular orientation resulting from its stiff linear moleculesand their propensity for forming liquid crystals in the spinning solution. In common with the small number of other highlyoriented materials, these fibers have a (small) negative CTE in the axial direction.

Quite widely used in composites which are lighter than those based on carbon fiber and electrically insulating. Theirmechanical properties are generally inferior; more specifically they have a high specific tensile strength approaching thatof carbon fiber composites, but quite low strength in compression.

In addition to composites, applications include protective clothing and body armour, friction products, elastomerreinforcement (e.g. hoses and drive belts), ropes and cords and as high strength high modulus fabrics e.g. highperformance sailcloths.

Physical Properties Mechanical PropertiesDensity 1.44 g cm-3 Tensile modulus 59-124 GPaResistance to Ultra-violet Fair Tensile strength 2760 MPa

Thermal Properties Chemical ResistanceCoefficient of thermal expansion -2 along axis x10-6 K-1 Acids - concentrated PoorLower working temperature -200 C Acids - dilute FairSpecific heat 1400 J K-1 kg-1 Alcohols GoodThermal conductivity @23C 0.04 W m-1 K-1 Alkalis Good-PoorUpper working temperature 180-245 C Aromatic hydrocarbons Good

Greases and Oils GoodHalogenated Hydrocarbons GoodHalogens GoodKetones Good

FabricWe also supply Carbon fibre/polyaramid blend fabrics.

AR303520

Xi

Weight.m-2. . . . . . . . . . . . . 60g Coil width . . . . . . . . . . . . . . 1270mm

Ends x Picks/10cm . . . . . . 134x134 Warp Yarn . . . . . . . . . . . . . 22TexWeft Yarn . . . . . . . . . . . . . . 22Tex Weave. . . . . . . . . . . . . . . . . PlainThickness . . . . . . . . . . . . . . 0.1mm


Thickness : 0.1mm. This fabric is made from Kevlar 491. Plain weave: Warp (longitudinal) yarns (ends) pass over and under alternateweft (transverse) yarns (picks) and vice-versa.

AR303550

Xi




Thickness : 0.25mm. This fabric is made from Kevlar 491. Plain weave: Warp (longitudinal) yarns (ends) pass over and under alternateweft (transverse) yarns (picks) and vice-versa.

Polymer–Polyamide/imide

49


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyaramid


Fabric

AR303561

Xi




Thickness : 0.3mm. This fabric is made from Kevlar Ht (T129)1. Plain weave: Warp (longitudinal) yarns (ends) pass over and underalternate weft (transverse) yarns (picks) and vice-versa.

AR303562

Xi




Thickness : 0.3mm. This fabric is made from Kevlar Ht (T129)1. Plain weave: Warp (longitudinal) yarns (ends) pass over and underalternate weft (transverse) yarns (picks) and vice-versa.

FiberMaterial Kevlar 291 Kevlar 491 Kevlar Ht (T129)

Density g cm-3 1.44 1.45 1.44

Extension to break % 3.7 1.9 3.6

Modulus GPa 58 120 75

Specific Modulus cN/tex 4000 8300 5200

Shrinkage @100C % 0.02

Specific Tenacity cN/tex 190 190 235

AR305722

Xi

Tex Number . . . . . . . . . . . . 22 Filament Diameter . . . . . . . 0.017mmNumber of Filaments . . . . . 70 Type . . . . . . . . . . . . . . . . . . Kevlar 291


Continuous multi-filament Yarn

AR305745

Xi




AR305744

Xi




AR305768

Xi

Tex Number . . . . . . . . . . . . 161 Filament Diameter . . . . . . . 0.012mmNumber of Filaments . . . . . 1000 Type . . . . . . . . . . . . . . . . . . Twaron1 2200



Polymer–Polyaramid

50


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyaramid


Fiber

AR305767

Xi




AR305779

Xi




AR305783

Xi

Tex Number . . . . . . . . . . . . 830 Cord diameter . . . . . . . . . . 0.8mmCondition. . . . . . . . . . . . . . . Braided Cord

QuantityWeb Code Length 1 Reel177-217-165 1 m CAD 143.00152-138-007 2 m CAD 154.00017-261-969 5 m CAD 180.00157-747-454 10 m CAD 217.00718-436-099 20 m CAD 260.00804-504-563 50 m CAD 368.00

Breaking load : 75kg.

AR305762

Xi

Tex Number . . . . . . . . . . . . 6250 Cord diameter . . . . . . . . . . 3mmCondition. . . . . . . . . . . . . . . Braided Cord


Breaking load : 720kg.

Polyaramid

Polymetaphenylene isophthalamide

Common Brand Names : Nomex

General Description : An infusible, wholly aromatic polymer that can strictly be described as nylon I,I - but rarely is.Manufactured only as a fiber (by solution spinning), it has a very high thermal stability and temperature and flameresistance. In contrast to its chemical isomer Kevlar1, its tensile properties are similar to those of normal textile fibersbut its hydrolysis resistance in hot wet conditions is better (than Kevlar’s). Its radiation resistance is also very good.

The fiber is converted into a number of fiber-based forms, of which the following are available from Goodfellow’s stock :calendered and uncalendered papers, pressboards of three different densities and honeycomb. The last is made fromNomex1 paper coated in a phenolic resin. Other forms, eg felts, can be available as special orders.

Applications include protective clothing (e.g. for firefighters and racing drivers), process equipment and insulation andfiltration media.

Explanation of Type numbersT410 Calendered PaperT411 Un-calendered PaperT418 Calendered Paper, containing 50% micaT992 Low Density PressboardT993 Medium Density PressboardT994 High Density Pressboard

Physical Properties Chemical ResistanceDensity 1.38 g cm-3 Acids - concentrated PoorLimiting oxygen index 29 % Acids - dilute Good-FairRadiation resistance Good Alcohols GoodWater absorption - equilibrium 9 % Alkalis Good-Poor

Aromatic hydrocarbons GoodThermal Properties Greases and Oils GoodCoefficient of thermal expansion 20 x10-6 K-1 Halogenated Hydrocarbons GoodSpecific heat 1200 J K-1 kg-1 Ketones GoodThermal conductivity @23C 0.13 W m-1 K-1

Upper working temperature 200 - 300 C


51


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyaramid


FilmMaterial T410 T411 T418

Density g cm-3 0.72-1.05 0.3 1.1

Dielectric Constant @ 60Hz 1.6 - 3.4 1.2 2.5


kV mm-1 17-55 9-18 33-63

Dissipation Factor @60Hz 0.004-0.007 0.003 0.003

Elmendorf Tear Strength N mm-1 14-39 7 14-22


% 11-22 3 2.5


% 8-17 5 2.5

Initial Tear Strength g mm-1 12-32 2-4 6-10

Limiting Oxygen Index % 29-32 29 63

Shrinkage @300C % 0.3-2 0.2-0.3


MPa 85-130 6 40

Tensile strength - Transverse MPa 35-75 3 30

Thermal Conductivity @23C W m-1 K-1 0.1-0.16

AR311050

Xi

Thickness . . . . . . . . . . . . . . 0.05mm Type . . . . . . . . . . . . . . . . . . T410Condition. . . . . . . . . . . . . . . Calendered paper



AR311310

Xi

Thickness . . . . . . . . . . . . . . 0.13mm Coil width . . . . . . . . . . . . . . 30mmType . . . . . . . . . . . . . . . . . . T418 Condition. . . . . . . . . . . . . . . Contains 50% mica by weight


AR311300

Xi

Thickness . . . . . . . . . . . . . . 0.13mm Coil width . . . . . . . . . . . . . . 33mmType . . . . . . . . . . . . . . . . . . T411 Condition. . . . . . . . . . . . . . . Uncalendered paper


AR311250

Xi

Thickness . . . . . . . . . . . . . . 0.25mm Coil width . . . . . . . . . . . . . . 93mmType . . . . . . . . . . . . . . . . . . T410 Condition. . . . . . . . . . . . . . . Calendered paper


AR311360

Xi

Thickness . . . . . . . . . . . . . . 0.36mm Type . . . . . . . . . . . . . . . . . . T418Condition. . . . . . . . . . . . . . . Contains 50% mica by weight


AR311380

Xi



AR311381

Xi




52


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyaramid


Film

AR311450

Xi

Thickness . . . . . . . . . . . . . . 0.76mm Coil width . . . . . . . . . . . . . . 63.5mmType . . . . . . . . . . . . . . . . . . T410 Condition. . . . . . . . . . . . . . . Calendered paper

Coil Width 63.5mm QuantityWeb Code Length 1 Reel353-662-497 0.5 m CAD 190.00207-806-032 1 m CAD 222.00975-760-716 2 m CAD 269.00970-087-675 5 m CAD 374.00

HoneycombCell Size mm 6 5 3 5

Compressive Strength MPa 0.7 1.1 2.2 3.8

Core Density g cm-3 0.024 0.032 0.048 0.064

Plate Shear Modulus -Longitudinal

MPa 25 34 52 70

Plate Shear Modulus -Transverse

MPa 14 20 29 35

Plate Shear Strength -Longitudinal

MPa 0.7 1.1 1.8 2.5

Plate Shear Strength -Transverse

MPa 0.35 0.6 0.9 1.1

Wall Thickness mm 0.05 0.05 0.05 0.08

Prices for sheets up to 1200x2400mm on request.

AR312610

Xi

Thickness . . . . . . . . . . . . . . 5mm Cell size . . . . . . . . . . . . . . . 3mmAdhesive (Resin) . . . . . . . . Phenolic Core Density . . . . . . . . . . . 0.048g.cm-3

Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312710

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312715

Xi


Cell Wall . . . . . . . . . . . . . . . Approx. 0.09mm


AR312810

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312620

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312720

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312725

Xi





53


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyaramid


Honeycomb

AR312820

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312650

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312750

Xi

Thickness . . . . . . . . . . . . . . 20mm Cell size . . . . . . . . . . . . . . . 5mmAdhesive (Resin) . . . . . . . . Phenolic Core Density . . . . . . . . . . . 0g.cm-3

Cell Wall . . . . . . . . . . . . . . . 0.05mm


AR312755

Xi




AR312850

Xi


Cell Wall . . . . . . . . . . . . . . . 0.05mm


SheetMaterial T992 T993 T994

Density g cm-3 0.5 0.83 1.14

Dielectric Constant @ 60Hz 1.7 ~3.5 ~4.4


kV mm-1 15-32 ~33-66 ~25-70

Dissipation Factor @60Hz 0.02 ~0.09 ~0.02


% 3 5.5


% 4 7

Limiting Oxygen Index % 29 32


MPa 14.5 56 120

Tensile strength - Transverse MPa 11 32 70

Thermal Conductivity @23C W m-1 K-1 0.07

AR313110

Xi

Thickness . . . . . . . . . . . . . . 1.0mm Condition. . . . . . . . . . . . . . . PressboardType . . . . . . . . . . . . . . . . . . T994 - High density Pressboard


AR313100

Xi

Thickness . . . . . . . . . . . . . . 1.0mm Condition. . . . . . . . . . . . . . . PressboardType . . . . . . . . . . . . . . . . . . T993 - Medium density Press-

board


AR313150

Xi

Thickness . . . . . . . . . . . . . . 1.5mm Condition. . . . . . . . . . . . . . . PressboardType . . . . . . . . . . . . . . . . . . T992 - Low density Pressboard



54


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyaramid


Sheet

AR313310

Xi



AR313300

Xi

Thickness . . . . . . . . . . . . . . 3.0mm Condition. . . . . . . . . . . . . . . PressboardType . . . . . . . . . . . . . . . . . . T993 - Medium density Press-

board


AR313450

Xi



FiberDensity g cm-3 1.38


Specific Modulus cN/tex 1100

Specific Tenacity cN/tex 35 - 44

AR315722

Xi

Tex Number . . . . . . . . . . . . 22 Filament Diameter . . . . . . . 0.01mmNumber of Filaments . . . . . 100



Chopped FiberDensity g cm-3 1.38



Specific Tenacity cN/tex 35 - 44

AR316575

Xi

Nominal Diameter . . . . . . . 0.012mm Fiber length . . . . . . . . . . . . 75mm


These fibers are not circular and have a tex value of 0.17tex.


55


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polybenzimidazole

PBI

Common Brand Names : Celazole

General Description : An infusible, black high performance polymer with a wholly aromatic molecule of high thermalstability. Semi-fabricated items are made, normally by the polymer manufacturer, by powder sintering processes.

It has excellent high temperature properties - probably on balance the best of any commercially available polymer - and isvery expensive. It is strong, stiff, very hard, has a particularly high strength in and recovery from compression and a CTEsimilar to that of aluminum. It has good chemical resistance resisting many harsh chemical environments better thanmany other high performance polymers, but is attacked by polar aprotic solvents and, at elevated temperatures, by strongaqueous acids and (to a lesser extent) alkalis. Despite absorbing (slowly) a high percentage of water at saturation, it isstable to hydrolysis and resists high pressure steam.

Physical Properties Mechanical PropertiesDensity 1.3 g cm-3 Coefficient of friction 0.19-0.27Flammability Does not burn Compressive modulus 6.2 GPaLimiting oxygen index 58 % Compressive strength 400 MPaRadiation resistance Good Elongation at break 3 %Water absorption - over 24 hours 0.4 % Hardness - Rockwell K115

Izod impact strength 590 unnotched J m-1

Electrical Properties Poisson’s ratio 0.34Dielectric constant @1MHz 3.2 Tensile modulus 5.9 GPaDielectric strength 21 kV mm-1 Tensile strength 160 MPaVolume resistivity 8x1014 Ohmcm

Chemical ResistanceThermal Properties Acids - concentrated PoorCoefficient of thermal expansion 23 x10-6 K-1 Acids - dilute Fair-PoorHeat-deflection temperature - 0.45MPa 435 C Alcohols GoodThermal conductivity @23C 0.41 W m-1 K-1 Alkalis Good-PoorUpper working temperature 260-400 C Aromatic hydrocarbons Good

Greases and Oils GoodHalogenated Hydrocarbons GoodKetones Good

SheetBI303130

Xi


QuantityWeb Code Size 1pc 2pcs144-323-291 25 x 25 mm CAD 486.00 CAD 656.00040-401-545 50 x 50 mm CAD 741.00 CAD 1212.00050-196-673 100 x 100 mm CAD 2064.00

RodBI307910

Xi

Diameter . . . . . . . . . . . . . . . 9.5mm Color . . . . . . . . . . . . . . . . . . Black


BI307915

Xi



BI307925

Xi



BI307938

Xi



BI307940

Xi


QuantityWeb Code Length 1pc228-179-876 23 mm CAD 534.00

Polymer–Polybenzimidazole

56


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polybutylene terephthalate

PBT

Common Brand Names : Celanex, Orgater, Valox

General Description : A semi-crystalline, white or off-white polyester similar in both composition and properties topolyethyleneterephthalate (PET). It has somewhat lower strength and stiffness than PET, is a little softer but has higherimpact strength and very similar chemical resistance. As it crystallises more rapidly than PET, it tends to be preferred forindustrial scale moulding.

Applications include electrical and automotive components (including "under-the-hood") and power tool casings.

Physical Properties Hardness - Rockwell M70Density 1.31 g cm-3 Izod impact strength 60 J m-1

Flammability HB Tensile modulus 2 GPaLimiting oxygen index 25 % Tensile strength 50 MPaRadiation resistance GoodResistance to Ultra-violet Fair? Chemical ResistanceWater absorption - over 24 hours 0.1 % Acids - concentrated Good-Poor

Acids - dilute GoodElectrical Properties Alcohols GoodDielectric constant @1kHz 3.2 Alkalis FairDielectric strength 20 kV mm-1 Aromatic hydrocarbons GoodDissipation factor @ 1kHz 0.002 Greases and Oils GoodVolume resistivity 1015 Ohmcm Halogenated Hydrocarbons Good-Poor

Halogens PoorThermal Properties Ketones Good-PoorHeat-deflection temperature - 0.45MPa 150 CHeat-deflection temperature - 1.8MPa 60 CSpecific heat 1200-2300 J K-1 kg-1

Upper working temperature 120-? C

Mechanical PropertiesElongation at break 250 %

FilmPermeability to Hydrogen@25C

x10-13 cm3. cm cm-2 s-1 Pa-1 1.5


x10-13 cm3. cm cm-2 s-1 Pa-1 0.004


x10-13 cm3. cm cm-2 s-1 Pa-1 0.2


ES341050

Xi

Thickness . . . . . . . . . . . . . . 0.55mm



SheetES343150

Xi

Thickness . . . . . . . . . . . . . . 2.0mm


ES343200

Xi

Thickness . . . . . . . . . . . . . . 9.5mm


Polymer–Polybutyleneterephthalate

57


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polybutylene terephthalate

PBT

MonofilamentDensity g cm-3 1.31

Extension to break % 26

Shrinkage @100C % 3

Tensile strength GPa 0.5

ES345910

Xi

Diameter . . . . . . . . . . . . . . . 0.18mm

QuantityWeb Code Length 1 Reel808-285-012 10 m CAD 168.00035-627-584 20 m CAD 216.00453-449-987 50 m CAD 354.00681-238-868 100 m CAD 386.00154-851-043 200 m CAD 444.00356-382-524 500 m CAD 602.00547-820-733 1000 m CAD 850.00

ES345930

Xi

Diameter . . . . . . . . . . . . . . . 0.8mm


RodES347910

Xi

Diameter . . . . . . . . . . . . . . . 6.35mm


ES347920

Xi

Diameter . . . . . . . . . . . . . . . 12.7mm


ES347925

Xi

Diameter . . . . . . . . . . . . . . . 25.4mm


GranuleES346310

Xi



This is a grade suitable for injection moulding and has an MVI (250/2) of 25cm3/10 mins.


58


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polybutylene terephthalate - 30% Glass Fiber Reinforced

PBT 30% GFR

Common Brand Names : Celanex, Orgater, Valox

General Description : The reinforcement of PBT with glass fiber results in large increases in strength, stiffness and heatdistortion temperatures without loss of impact strength. The normal color is off-white.

Applications include those for unfilled PBT together with high power lighting components, ignition rotors, distributor capsetc.

Physical Properties Mechanical PropertiesDensity 1.63 g cm-3 Elongation at break 2 %Flammability HB Hardness - Rockwell M93Limiting oxygen index 23 % Izod impact strength 70 J m-1

Water absorption - over 24 hours 0.15-0.35 % Tensile modulus 12 GPaTensile strength 185 MPa

Electrical PropertiesDielectric constant @1MHz 4 Chemical ResistanceDielectric strength 20 kV mm-1 Acids - concentrated Good-PoorDissipation factor @ 1kHz 0.002 Acids - dilute GoodVolume resistivity 2x1014 Ohmcm Alcohols Good

Alkalis FairThermal Properties Aromatic hydrocarbons GoodCoefficient of thermal expansion 20-70 x10-6 K-1 Greases and Oils GoodHeat-deflection temperature - 0.45MPa 220 C Halogenated Hydrocarbons Good-PoorHeat-deflection temperature - 1.8MPa 200 C Halogens PoorThermal conductivity @23C 0.24 W m-1 K-1 Ketones Good-PoorUpper working temperature 120-200 C

RodES357920

Xi

Diameter . . . . . . . . . . . . . . . 20mm Condition. . . . . . . . . . . . . . . Machining feedstock

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs313-637-149 100 mm CAD 188.00 CAD 221.00 CAD 296.00 CAD 377.00 CAD 583.00204-637-574 200 mm CAD 214.00 CAD 258.00 CAD 355.00579-687-807 500 mm CAD 266.00 CAD 332.00 CAD 605.00460-985-461 1000 mm CAD 324.00 CAD 492.00

ES357930

Xi



Polycarbonate

PC

Common Brand Names : Lexan, Makrofol, Makrolon

General Description : A crystal clear and colorless, amorphous engineering thermoplastic notable for its high impactresistance (which remains high down to -40C). It has reasonably good temperature resistance, good dimensionalstability and low creep but somewhat limited chemical resistance and is prone to environmental stress cracking. It alsohas poor fatigue and wear properties.

Applications include glazing, safety shields, lenses, casings and housings, light fittings, kitchenware (microwaveable),medical apparatus (sterilisable) and CD’s (the discs).

Physical Properties Mechanical PropertiesAbbe number 34.0 Abrasive resistance - ASTM D1044 10-15 mg/1000 cyclesDensity 1.2 g cm-3 Coefficient of friction 0.31Flammability V0-V2 Compressive strength >80 MPaLimiting oxygen index 25-27 % Elongation at break 100-150 %Radiation resistance Fair Hardness - Rockwell M70Refractive index 1.584-6 Izod impact strength 600-850 J m-1

Resistance to Ultra-violet Fair Poisson’s ratio 0.37Water absorption - equilibrium 0.35 % Tensile modulus 2.3-2.4 GPaWater absorption - over 24 hours 0.1 % Tensile strength 55-75 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 2.9 Acids - concentrated GoodDielectric strength 15-67 kV mm-1 Acids - dilute GoodDissipation factor @ 1MHz 0.01 Alcohols GoodSurface resistivity 1015 Ohm/sq Alkalis Good-PoorVolume resistivity 1014-1016 Ohmcm Aromatic hydrocarbons Poor

Greases and Oils Good-FairThermal Properties Halogenated Hydrocarbons Good-PoorCoefficient of thermal expansion 66-70 x10-6 K-1 Halogens PoorHeat-deflection temperature - 0.45MPa 140 C Ketones PoorHeat-deflection temperature - 1.8MPa 128-138 CLower working temperature -135 CSpecific heat ~1200 J K-1 kg-1




-30%


59


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polycarbonate

PC


kV mm-1 350 @ 40mm



% ~100 - grade N,DE1, ~40 - grade KG


% ~100 - grade N,DE1, >100 - grade KG


Initial Tear Strength g mm-1 12-29


x10-13 cm3. cm cm-2 s-1 Pa-1 6


x10-13 cm3. cm cm-2 s-1 Pa-1 9


x10-13 cm3. cm cm-2 s-1 Pa-1 0.2


x10-13 cm3. cm cm-2 s-1 Pa-1 1




MPa >80 - grade N,DE1, >220 - grade KG

Tensile strength - Transverse MPa >80

CT301025

Xi

Thickness . . . . . . . . . . . . . . 0.002mm Grade - Makrofol KG1 . . . monoaxially oriented and crystal-lized


CT301020

Xi

Thickness . . . . . . . . . . . . . . 0.002mm



CT301030

Xi

Thickness . . . . . . . . . . . . . . 0.003mm Grade - Makrofol KG1 . . . monoaxially oriented and crystal-lized

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs623-432-998 100 x 100 mm CAD 185.00 CAD 210.00 CAD 272.00 CAD 353.00 CAD 498.00929-114-952 150 x 150 mm CAD 199.00 CAD 230.00 CAD 304.00 CAD 398.00 CAD 562.00139-368-229 300 x 300 mm CAD 242.00 CAD 290.00 CAD 400.00

CT301060

Xi

Thickness . . . . . . . . . . . . . . 0.006mm



CT301210

Xi

Thickness . . . . . . . . . . . . . . 0.02mm Color . . . . . . . . . . . . . . . . . . YellowGrade - Makrofol N1. . . . . cast isotropic

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs352-766-982 100 x 100 mm CAD 157.00 CAD 179.00 CAD 239.00 CAD 312.00 CAD 448.00095-868-518 150 x 150 mm CAD 165.00 CAD 191.00 CAD 258.00 CAD 339.00 CAD 487.00983-572-043 300 x 300 mm CAD 191.00 CAD 228.00 CAD 316.00946-501-053 600 x 600 mm CAD 243.00 CAD 301.00 CAD 432.00


Polymer–Polycarbonate

60


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polycarbonate

PC

Film

CT301260

Xi

Thickness . . . . . . . . . . . . . . 0.06mm Color . . . . . . . . . . . . . . . . . . Pale yellow/greenGrade - Makrofol KG1 . . . monoaxially oriented and crystal-

lized

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs312-627-895 100 x 100 mm CAD 157.00 CAD 180.00 CAD 240.00 CAD 313.00 CAD 450.00078-484-238 150 x 150 mm CAD 166.00 CAD 192.00 CAD 260.00 CAD 341.00 CAD 490.00810-535-915 300 x 300 mm CAD 193.00 CAD 230.00 CAD 319.00316-991-217 600 x 600 mm CAD 246.00 CAD 305.00


CT301305

Xi

Thickness . . . . . . . . . . . . . . 0.125mm Grade - DE 1 . . . . . . . . . . . extruded isotropic

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs557-264-106 100 x 100 mm CAD 165.00 CAD 191.00 CAD 257.00 CAD 338.00429-059-547 150 x 150 mm CAD 178.00 CAD 209.00 CAD 286.00 CAD 378.00616-865-689 300 x 300 mm CAD 216.00 CAD 263.00 CAD 371.00716-007-897 600 x 600 mm CAD 293.00 CAD 371.00


CT301310

Xi

Thickness . . . . . . . . . . . . . . 0.175mm Grade - DE 1 . . . . . . . . . . . extruded isotropic


CT301326

Xi




CT301325

Xi

Thickness . . . . . . . . . . . . . . 0.25mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs015-351-504 100 x 100 mm CAD 139.00 CAD 159.00 CAD 212.00 CAD 272.00 CAD 381.00918-941-570 150 x 150 mm CAD 148.00 CAD 171.00 CAD 232.00 CAD 299.00867-688-476 300 x 300 mm CAD 174.00 CAD 208.00 CAD 289.00 CAD 380.00461-054-117 600 x 600 mm CAD 225.00 CAD 280.00 CAD 444.00

CT301350

Xi

Thickness . . . . . . . . . . . . . . 0.5mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs631-768-893 100 x 100 mm CAD 142.00 CAD 163.00 CAD 217.00 CAD 279.00 CAD 391.00971-108-397 150 x 150 mm CAD 151.00 CAD 176.00 CAD 239.00 CAD 309.00388-540-192 300 x 300 mm CAD 180.00 CAD 217.00 CAD 304.00 CAD 406.00567-512-844 600 x 600 mm CAD 238.00 CAD 299.00 CAD 552.00

CT301351

Xi





61


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polycarbonate

PC

Metallized FilmCT301820

Xi

Thickness . . . . . . . . . . . . . . 0.002mm Ohms/Square . . . . . . . . . . . 4Metallized with . . . . . . . . . . Aluminum

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs939-100-249 100 x 100 mm CAD 236.00 CAD 267.00 CAD 344.00 CAD 454.00387-534-002 150 x 160 mm CAD 257.00 CAD 296.00 CAD 390.00441-761-924 160 x 300 mm CAD 281.00 CAD 331.00 CAD 444.00


SheetCT303050

Xi

Thickness . . . . . . . . . . . . . . 1.0mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs325-170-208 150 x 150 mm CAD 142.00 CAD 160.00 CAD 204.00 CAD 256.00646-279-938 300 x 300 mm CAD 167.00 CAD 196.00 CAD 288.00 CAD 456.00490-286-320 600 x 600 mm CAD 229.00 CAD 349.00

CT303100

Xi

Thickness . . . . . . . . . . . . . . 2.0mm


CT303150

Xi

Thickness . . . . . . . . . . . . . . 5.0mm


CT303350

Xi

Thickness . . . . . . . . . . . . . . 10.0mm

QuantityWeb Code Size 1pc748-156-018 112 x 122 mm CAD 194.00350-959-124 125 x 300 mm CAD 242.00041-918-470 145 x 265 mm CAD 243.00951-767-837 300 x 300 mm CAD 308.00

CT303400

Xi

Thickness . . . . . . . . . . . . . . 12.0mm


CT303451

Xi

Thickness . . . . . . . . . . . . . . 25mm


CT303450

Xi



RodCT307903

Xi



CT307906

Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs819-129-000 100 mm CAD 139.00 CAD 151.00 CAD 182.00 CAD 226.00 CAD 304.00391-126-465 200 mm CAD 146.00 CAD 161.00 CAD 197.00 CAD 247.00 CAD 334.00890-808-368 500 mm CAD 159.00 CAD 180.00 CAD 227.00 CAD 290.00 CAD 397.00351-044-635 1000 mm CAD 174.00 CAD 202.00 CAD 261.00 CAD 340.00


62


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polycarbonate

PC

Rod

CT307910

Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs880-576-608 100 mm CAD 156.00 CAD 173.00 CAD 213.00 CAD 270.00 CAD 371.00072-078-157 200 mm CAD 166.00 CAD 187.00 CAD 236.00 CAD 302.00 CAD 416.00009-762-596 500 mm CAD 186.00 CAD 216.00 CAD 281.00 CAD 378.00 CAD 632.00220-315-588 1000 mm CAD 209.00 CAD 248.00 CAD 344.00 CAD 564.00

CT307925

Xi



CT307950

Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs013-986-183 100 mm CAD 250.00 CAD 297.00 CAD 498.00 CAD 841.00748-263-660 200 mm CAD 285.00 CAD 407.00 CAD 784.00532-953-415 500 mm CAD 453.00 CAD 750.00619-179-694 1000 mm CAD 739.00 CAD 1323.00

CT307980

Xi



CT307990

Xi



TubeCT307400

Xi



CT307500

Xi

Outside Diameter . . . . . . . . 20mm Wall Thickness . . . . . . . . . . 2mmInside Diameter . . . . . . . . . 16mm

QuantityWeb Code Length 1pc 2pcs 5pcs891-730-422 200 mm CAD 146.00 CAD 174.00 CAD 241.00804-300-277 500 mm CAD 172.00 CAD 211.00745-098-696 1000 mm CAD 201.00 CAD 299.00

GranuleCT306310

Xi

Nominal Granule Size . . . . 3mm Additives . . . . . . . . . . . . . . . Heat stabilizer only



63


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polycarbonate - 30% Carbon Fiber Reinforced

PC - 30% CFR

Physical Properties Mechanical PropertiesDensity 1.33 g cm-3 Elongation at break 2 %Flammability V0 Tensile modulus 18 GPaLimiting oxygen index 25-27 % Tensile strength 170 MPaWater absorption - over 24 hours <0.2 %

Chemical ResistanceElectrical Properties Acids - concentrated FairSurface resistivity 102 Ohm/sq Acids - dilute GoodVolume resistivity 103 Ohmcm Alcohols Good

Alkalis PoorThermal Properties Aromatic hydrocarbons PoorCoefficient of thermal expansion 14 x10-6 K-1 Greases and Oils GoodThermal conductivity @^C 0.7 W m-1 K-1 Halogens PoorUpper working temperature 130 C Ketones Poor

GranuleCT356310

Xi



Polycarbonate - 30% Glass Fiber Filled

PC - 30% GFR

Physical Properties Mechanical PropertiesDensity 1.43 g cm-3 Elongation at break 3 %Flammability V-1 Tensile modulus 5.8 GPaWater absorption 0.28 % Tensile strength 70 MPaWater absorption - equilibrium 0.11 %

Chemical ResistanceElectrical Properties Acids - concentrated FairDielectric constant @1MHz 3.3 Acids - dilute GoodDielectric strength 30 kV mm-1 Alcohols GoodDissipation factor @ 1MHz 0.009 Alkalis PoorSurface resistivity 1014 Ohm/sq Aromatic hydrocarbons PoorVolume resistivity 1016 Ohmcm Greases and Oils Good

Halogens PoorThermal Properties Ketones PoorCoefficient of thermal expansion 30 x10-6 K-1

Heat-deflection temperature - 0.45MPa 147 CHeat-deflection temperature - 1.8MPa 142 CSpecific heat 1080 J K-1 kg-1

Thermal conductivity @^C 0.26 W m-1 K-1

Upper working temperature 140 C

RodCT337920

Xi

Diameter . . . . . . . . . . . . . . . 20mm

QuantityWeb Code Length 1pc 2pcs 5pcs310-543-731 100 mm CAD 172.00 CAD 208.00 CAD 291.00889-343-498 200 mm CAD 195.00 CAD 239.00 CAD 342.00395-107-830 500 mm CAD 239.00 CAD 303.00 CAD 596.00763-761-882 1000 mm CAD 290.00 CAD 472.00

Polycarbonate - Conductive

PC

Common Brand Names : Makrofol, Pokalon C

General Description : Polycarbonate film filled, typically with carbon, to give a measure of electrical conductivity. Itscolor is normally black.

Physical Properties Mechanical PropertiesDensity 1.28 - 1.35 g cm-3 Elongation at break 5-9 %Water absorption - equilibrium ~0.9 % Tensile modulus ~3.8 GPa

Tensile strength 60-70 MPaElectrical PropertiesSurface resistivity 100-500 Ohm/sqVolume resistivity 1-100 Ohmcm


-30%

CarbonFiberReinforced

64


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polycarbonate - Conductive

PC

FilmCT311014

Xi

Thickness . . . . . . . . . . . . . . 0.014mm


Polychlorotrifluoroethylene

PCTFE

Common Brand Names : Kel-F, NeoflonPhysical Properties Mechanical PropertiesDensity 2.10 - 2.14 g cm-3 Compressive strength 9-12 MPaFlammability V-0 Elongation at break 80-250 %Refractive index 1.435 Hardness - Rockwell R75-112D75-90 - ShoreWater absorption <0.01 % Izod impact strength 267 J m-1

Tensile modulus 1.3-1.8 GPaElectrical Properties Tensile strength 31-41 MPaDielectric constant @1MHz 2.24-2.8Dielectric strength 14 kV mm-1 Chemical ResistanceDissipation factor @ 1MHz 0.01 Acids - concentrated GoodDissipation factor @ 1kHz 0.023-0.027 Acids - dilute GoodSurface resistivity 1015 Ohm/sq Alcohols GoodVolume resistivity 1016 Ohmcm Alkalis Good

Aromatic hydrocarbons GoodThermal Properties Greases and Oils GoodCoefficient of thermal expansion 70 x10-6 K-1 Halogens GoodHeat-deflection temperature - 0.45MPa 126 C Ketones GoodLower working temperature -240 CSpecific heat 900 J K-1 kg-1

Thermal conductivity @^C 0.13 W m-1 K-1


SheetFP353010

T Xi

Thickness . . . . . . . . . . . . . . 1.2mm


FP353020

T Xi

Thickness . . . . . . . . . . . . . . 2.0mm


RodFP357905

T Xi

Diameter . . . . . . . . . . . . . . . 1.6mm


FP357910

T Xi

Diameter . . . . . . . . . . . . . . . 3.2mm


FP357920

T Xi

Diameter . . . . . . . . . . . . . . . 4.8mm


FP357930

T Xi

Diameter . . . . . . . . . . . . . . . 6.35mm



-Conductive

65


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polychlorotrifluoroethylene

PCTFE

Rod

FP357940

T Xi

Diameter . . . . . . . . . . . . . . . 9.5mm


FP357950

T Xi

Diameter . . . . . . . . . . . . . . . 12.7mm


FP357960

T Xi

Diameter . . . . . . . . . . . . . . . 25.4mm


Polyetheretherketone

PEEK

Common Brand Names : Victrex, Zyex

General Description : A high performance thermoplastic with the characteristics common to this group - strong, stiff,hard, high temperature resistance, good chemical resistance and inherently low flammability and smoke emission. PEEKis amber in color and usually semi-crystalline and opaque, except thin films are usually amorphous and transparent. Italso has very good resistance to wear, dynamic fatigue and radiation, but it is difficult to process and very expensive.Filled grades, including ones designed for bearing-type applications are also available as special order items.

Applications include flexible PCBs (film), fibers and monofilaments, injection moulded engineering components and itemsused in aerospace and radiation environments.

Physical Properties Elongation at break 50 %Density 1.26 - 1.32 g cm-3 Hardness - Rockwell M99Flammability V-0 @ 1.5mm Izod impact strength 85 J m-1

Limiting oxygen index 35 % Poisson’s ratio 0.4Radiation resistance Good Tensile modulus 3.7-4.0 GPaResistance to Ultra-violet Fair Tensile strength 70-100 MPaWater absorption - equilibrium 0.5 %Water absorption - over 24 hours 0.1-0.3 % Chemical Resistance

Acids - concentrated Good-PoorElectrical Properties Acids - dilute GoodDielectric constant @1kHz 3.2-3.3 @ 50Hz-10Khz Alcohols GoodDielectric strength 190 @ 50mm kV mm-1 Alkalis GoodDissipation factor @ 1MHz 0.003 Aromatic hydrocarbons GoodVolume resistivity 1015-1016 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons GoodThermal Properties Halogens Good-PoorCoefficient of thermal expansion 47/108 x10-6 K-1 Ketones Good-PoorHeat-deflection temperature - 0.45MPa >260 CHeat-deflection temperature - 1.8MPa 160 CSpecific heat 1340 J K-1 kg-1


Upper working temperature 250 C

Mechanical PropertiesCoefficient of friction 0.18

Polymer–Polychlorotrifluoroethylene

66


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEEK

FilmDensity g cm-3 1.26 - amorphous

Dielectric Constant @ 1MHz 3.3


kV mm-1 110-150



% 240


% 240

Flammability VTM-1 @ 0.1mm



x10-13 cm3. cm cm-2 s-1 Pa-1 0.1


Shrinkage % 0.5 @150C

Specific Heat kJ kg-1 K-1 1.45


GPa 2.6


GPa 2.6


MPa 120


EK301006

Xi

Thickness . . . . . . . . . . . . . . 0.006mm Color . . . . . . . . . . . . . . . . . . Transparent pale amberCondition. . . . . . . . . . . . . . . Amorphous



EK301012

Xi



EK301025

Xi




EK301038

Xi




EK301050

Xi




Polymer–Polyetheretherketone

67


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEEK

Film

EK301075

Xi




EK301100

Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs034-895-541 150 x 150 mm CAD 179.00 CAD 202.00 CAD 251.00 CAD 314.00 CAD 415.00361-941-822 300 x 300 mm CAD 224.00 CAD 264.00 CAD 350.00


EK301125

Xi




EK301200

Xi




EK301250

Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs846-421-388 100 x 100 mm CAD 179.00 CAD 201.00 CAD 250.00 CAD 313.00 CAD 413.00802-672-493 150 x 150 mm CAD 201.00 CAD 232.00 CAD 299.00 CAD 382.00334-051-286 300 x 300 mm CAD 267.00 CAD 325.00 CAD 480.00


EK301400

Xi

Thickness . . . . . . . . . . . . . . 0.50mm Color . . . . . . . . . . . . . . . . . . Opaque grayCondition. . . . . . . . . . . . . . . Semi-crystalline




68


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEEK

SheetEK303010

Xi

Thickness . . . . . . . . . . . . . . 1.0mm Color . . . . . . . . . . . . . . . . . . Opaque grayCondition. . . . . . . . . . . . . . . Semi-crystalline

QuantityWeb Code Size 1pc 2pcs 5pcs306-731-667 150 x 150 mm CAD 315.00 CAD 397.00 CAD 745.00341-458-056 300 x 300 mm CAD 564.00 CAD 963.00682-255-193 300 x 450 mm CAD 753.00 CAD 1340.00281-898-395 450 x 600 mm CAD 1319.00

EK303450

Xi

Thickness . . . . . . . . . . . . . . 5.5mm Condition. . . . . . . . . . . . . . . Semi-crystalline


Machining feed-stock. May have a wavy surface finish and / or other surface imperfections.

MeshEK308703

Xi



EK308704

Xi



EK308705

Xi



EK308710

Xi



FiberDensity g cm-3 1.30

Extension to break % 19

Modulus - 10 % GPa 4.2

Modulus - 2 % cN/Tex 500

Modulus - 5 % GPa 4.35

Shrinkage @180C % 1.1

Tenacity - Knot cN/Tex 36

Tenacity - Loop cN/Tex 40

Specific Tenacity cN/tex 61

Tensile strength MPa 790

EK305723

Xi




69


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEEK

MonofilamentMaterial Type A Type B Type C

Density g cm-3 1.30 1.30 1.30

Extension to break % 38 35 20

Modulus - 10 % GPa 1.85 2.8 3.4

Modulus - 2 % cN/Tex 382 438 474

Modulus - 5 % GPa 2.7 3.7 3.9

Shrinkage @180C % 1.8 8.4 3.0

Tenacity cN/Tex 34 30 60

Tenacity - Knot cN/Tex 28 23 34

Tenacity - Loop cN/Tex 25 19 17

Tensile strength GPa 0.44 0.39 0.78

EK305915

Xi

Diameter . . . . . . . . . . . . . . . 0.15mm Condition. . . . . . . . . . . . . . . Type C, pigmented


EK305920

Xi

Diameter . . . . . . . . . . . . . . . 0.2mm Condition. . . . . . . . . . . . . . . Type A


EK305945

Xi

Diameter . . . . . . . . . . . . . . . 0.45mm Condition. . . . . . . . . . . . . . . Type C, additive free


EK305990

Xi

Diameter . . . . . . . . . . . . . . . 0.9mm Condition. . . . . . . . . . . . . . . Type A


EK305995

Xi

Diameter . . . . . . . . . . . . . . . 1.2mm Condition. . . . . . . . . . . . . . . Type B


RodEK307910

Xi

Diameter . . . . . . . . . . . . . . . 10mm Color . . . . . . . . . . . . . . . . . . Opaque grayCondition. . . . . . . . . . . . . . . Semi-crystalline


EK307925

Xi




70


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEEK

Rod

EK307950

Xi



EK307980

Xi



TubeEK307115

Xi

Outside Diameter . . . . . . . . 1.15mm Wall Thickness . . . . . . . . . . 0.175mmColor . . . . . . . . . . . . . . . . . . Transparent pale amber Inside Diameter . . . . . . . . . 0.8mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs276-302-993 200 mm CAD 164.00 CAD 185.00 CAD 233.00 CAD 298.00537-862-563 500 mm CAD 184.00 CAD 213.00 CAD 278.00 CAD 362.00232-824-236 1000 mm CAD 207.00 CAD 246.00 CAD 330.00

EK307160

Xi

Outside Diameter . . . . . . . . 1.6mm Wall Thickness . . . . . . . . . . 0.675mmColor . . . . . . . . . . . . . . . . . . Opaque gray Inside Diameter . . . . . . . . . 0.25mm


EK307165

Xi

Outside Diameter . . . . . . . . 1.6mm Wall Thickness . . . . . . . . . . 0.3mmColor . . . . . . . . . . . . . . . . . . Opaque gray Inside Diameter . . . . . . . . . 1mm


EK307170

Xi

Outside Diameter . . . . . . . . 1.6mm Wall Thickness . . . . . . . . . . 0.1mmColor . . . . . . . . . . . . . . . . . . Transparent pale amber Inside Diameter . . . . . . . . . 1.4mm


EK307200

Xi

Outside Diameter . . . . . . . . 3.2mm Wall Thickness . . . . . . . . . . 0.6mmColor . . . . . . . . . . . . . . . . . . Opaque gray Inside Diameter . . . . . . . . . 2mm


EK307225

Xi



EK307235

Xi




71


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEEK

PowderEK306010

Xi



GranuleEK306300

Xi



EK306301

Xi

Nominal Granule Size . . . . 6mm Condition. . . . . . . . . . . . . . . High viscosity


EK306302

Xi

Nominal Granule Size . . . . 6mm Condition. . . . . . . . . . . . . . . Medium viscosityCondition. . . . . . . . . . . . . . . Lubricated grade


Polyetherimide

PEI

Common Brand Names : Ultem

General Description : An amorphous, transparent and amber high performance thermoplastic with the characteristicscommon to this group - see PEEK. Relative to PEEK it is less temperature resistant, less expensive and lower in impactstrength. It is prone to stress cracking in chlorinated solvents.

Applications include electrical switchgear, connectors and other components, microwaveable cookware and "under-bonnet" components.

Physical Properties Compressive modulus 2.9 GPaDensity 1.27 g cm-3 Compressive strength 140 MPaFlammability V-0 @ 0.4mm Elongation at break 60 %Limiting oxygen index 47 % Hardness - Rockwell R125Radiation resistance Good Izod impact strength 50 J m-1

Resistance to Ultra-violet Good/Fair Poisson’s ratio 0.44Water absorption - equilibrium 1.3 % Tensile modulus 2.9 GPaWater absorption - over 24 hours 0.25 % Tensile strength 85 MPa

Electrical Properties Chemical ResistanceDielectric constant @1kHz 3.1 Acids - concentrated Good(-Fair?)Dielectric strength 30 @ 1.6mm kV mm-1 Acids - dilute GoodDissipation factor @ 1MHz 0.0013 @ 1KHz Alcohols GoodSurface resistivity 4.1013 Ohm/sq Alkalis Good-PoorVolume resistivity 7.1015 Ohmcm Aromatic hydrocarbons Poor

Greases and Oils GoodThermal Properties Halogenated Hydrocarbons Good-PoorCoefficient of thermal expansion 56 x10-6 K-1 Ketones PoorHeat-deflection temperature - 0.45MPa 200 CHeat-deflection temperature - 1.8MPa 190 CSpecific heat 2000 J K-1 kg-1



Mechanical PropertiesAbrasive resistance - ASTM D1044 10 mg/1000 cycles


72


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyetherimide

PEI


kV mm-1 254

Dissipation Factor @1MHz 0.0023 @ 1KHz

Elongation at Break % 15


x10-13 cm3. cm cm-2 s-1 Pa-1 0.01



GPa 2.5


GPa 2.5


MPa 85


Volume Resistivity Ohmcm 5.1015

EI311025

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Color . . . . . . . . . . . . . . . . . . Clear amber


Coil Width 610mm QuantityWeb Code Length 1 Reel828-451-644 1 m CAD 250.00556-456-787 2 m CAD 299.00

EI311050

Xi




EI311225

Xi




EI311250

Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs786-303-741 150 x 150 mm CAD 159.00 CAD 189.00 CAD 254.00 CAD 339.00287-973-060 300 x 300 mm CAD 215.00 CAD 268.00 CAD 380.00 CAD 517.00


EI311350

Xi




SheetEI313020

Xi



Polymer–Polyetherimide

73


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyetherimide

PEI

Sheet

EI313040

Xi

Thickness . . . . . . . . . . . . . . 3.6mm Color . . . . . . . . . . . . . . . . . . Black

QuantityWeb Code Size 1pc665-446-347 155 x 155 mm POA

EI313060

Xi



RodEI317906

Xi

Diameter . . . . . . . . . . . . . . . 6.4mm Color . . . . . . . . . . . . . . . . . . Clear amber

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs660-168-417 100 mm CAD 143.00 CAD 165.00 CAD 214.00 CAD 270.00 CAD 361.00521-056-216 200 mm CAD 159.00 CAD 186.00 CAD 248.00132-029-073 500 mm CAD 189.00 CAD 229.00 CAD 315.00503-630-181 1000 mm CAD 222.00 CAD 277.00

EI317912

Xi

Diameter . . . . . . . . . . . . . . . 12.7mm Color . . . . . . . . . . . . . . . . . . Clear amber


EI317925

Xi

Diameter . . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . Clear amber


TubeEI317200

Xi

Outside Diameter . . . . . . . . 2.3mm Wall Thickness . . . . . . . . . . 0.7mmColor . . . . . . . . . . . . . . . . . . Clear amber Inside Diameter . . . . . . . . . 0.9mm

LengthWeb Code832-732-834135-161-292220-351-705767-293-153214-194-900

GranuleEI316300

Xi



Polymer–Polyetherimide

74


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyetherketoneketone

PEKK

Physical Properties Heat-deflection temperature - 1.8MPa 175 CDensity 1.31 g cm-3 Thermal conductivity @^C 0.25 W m-1 K-1

Flammability V-0 Upper working temperature 260 CRadiation resistance GoodWater absorption - over 24 hours <0.20 % Mechanical Properties

Coefficient of friction 0.26Electrical Properties Compressive strength 206 MPaDielectric constant @1kHz 3.3 Elongation at break 12 %Dielectric strength 23.6 kV mm-1 Hardness - Rockwell M88Dissipation factor @ 1kHz 0.004 Izod impact strength 69 J m-1

Surface resistivity 2x1016 Ohm/sq Tensile modulus 4.5 GPaVolume resistivity 1016 Ohmcm Tensile strength 110 MPa

Thermal PropertiesCoefficient of thermal expansion 38 x10-6 K-1

GranuleEK316300

Xi

Nominal Granule Size . . . . 3mm Color . . . . . . . . . . . . . . . . . . NaturalCondition. . . . . . . . . . . . . . . Semi-crystalline Condition. . . . . . . . . . . . . . . Injection moulding grade


Polyethersulfone

PES

Common Brand Names : Ultrason E, Victrex

General Description : An amorphous, transparent and pale amber high performance thermoplastic with thecharacteristics common to this group - see PEEK. It has a slightly higher temperature resistance than PEI (but lessthan PEEK) and is the most temperature resistant transparent commercially available thermoplastic. It has a relativelyhigh water absorption and, in common with many other plastics, drying is essential before e.g. thermoforming. It has poorfatigue characteristics and is prone to environmental stress cracking but has good long term thermal ageing resistanceand reasonable radiation resistance. Its chemical resistance is not as wide as PEEK’s; hence stable solutions can bemade if solvents are correctly chosen.

Applications include electrical and electronic components, medical etc. equipment that needs repeated sterilization andphotographic accessories.

Physical Properties Mechanical PropertiesDensity 1.37 g cm-3 Abrasive resistance - ASTM D1044 6 mg/1000 cyclesFlammability V-0 @ 0.4mm Elongation at break 40-80 %Limiting oxygen index 34-41 % Hardness - Rockwell M88Radiation resistance Good-Fair Izod impact strength 85 J m-1

Refractive index 1.65 Poisson’s ratio 0.4Resistance to Ultra-violet Fair Tensile modulus 2.4-2.6 GPaWater absorption - equilibrium 2.2 % Tensile strength 70-95 MPaWater absorption - over 24 hours 0.4-1 %

Chemical ResistanceElectrical Properties Acids - concentrated Good-PoorDielectric constant @1MHz 3.7 Acids - dilute GoodDielectric strength 16 kV mm-1 Alcohols GoodDissipation factor @ 1MHz 0.003 Alkalis GoodVolume resistivity 1017 Ohmcm Aromatic hydrocarbons Good

Greases and Oils Good-FairThermal Properties Halogenated Hydrocarbons GoodCoefficient of thermal expansion 55 x10-6 K-1 Halogens Fair-PoorHeat-deflection temperature - 0.45MPa >260 C Ketones GoodHeat-deflection temperature - 1.8MPa 203 CLower working temperature -110 CThermal conductivity @23C 0.13-0.18 W m-1 K-1


Polymer–Polyetherketoneketone

75


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyethersulfone

PES



kV mm-1 232



Flammability VTM-0 @ 25mmHeat-sealing Temperature C 259-287



x10-13 cm3. cm cm-2 s-1 Pa-1 0.4



SU301025

T Xi




SU301050

T Xi




SU301100

T Xi

Thickness . . . . . . . . . . . . . . 0.1mm Coil width . . . . . . . . . . . . . . 530mmColor . . . . . . . . . . . . . . . . . . Clear amber

Coil Width 530mm QuantityWeb Code Length 1 Reel007-547-360 0.2 m CAD 274.00943-422-267 0.5 m CAD 350.00927-775-630 1 m CAD 437.00971-953-712 2 m CAD 561.00

SU301125

T Xi

Thickness . . . . . . . . . . . . . . 0.125mm Coil width . . . . . . . . . . . . . . 570mmColor . . . . . . . . . . . . . . . . . . Clear amber

Coil Width 570mm QuantityWeb Code Length 1 Reel494-219-106 0.2 m CAD 292.00777-390-698 0.5 m CAD 379.00173-828-214 1 m CAD 478.00

SU301250

T Xi




SU301300

T Xi



Coil Width 670mm QuantityWeb Code Length 1 Reel724-199-133 0.5 m CAD 644.00

SheetSU303300

T Xi


QuantityWeb Code Size 1pc074-924-405 100 x 100 mm POA365-557-563 150 x 150 mm POA

Polymer–Polyethersulfone

76


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyethersulfone

PES

Sheet

SU303350

T Xi



SU303400

T Xi


QuantityWeb Code Size 1pc 2pcs 5pcs699-182-491 150 x 150 mm CAD 343.00 CAD 541.00 CAD 1135.00397-803-337 300 x 300 mm CAD 891.00

SU303450

T Xi



RodSU307920

T Xi



SU307950

T Xi



SU307980

T Xi



GranuleSU306300

T Xi



SU306310

T Xi

Nominal Granule Size . . . . 3mm Color . . . . . . . . . . . . . . . . . . Clear amberCondition. . . . . . . . . . . . . . . High viscosity

QuantityWeb Code Weight 1 Pot463-733-846 100 g CAD 193.00

SU306311

T Xi

Nominal Granule Size . . . . 3mm Color . . . . . . . . . . . . . . . . . . Clear amberCondition. . . . . . . . . . . . . . . Medium viscosity


Polymer–Polyethersulfone

77


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyethylene - Carbon filled

PE

General Description : This polymer is a butyl-grafted polyethylene filled with Carbon-black.

Physical Properties Mechanical PropertiesDensity 0.96 g cm-3 Tensile strength 20 MPaResistance to Ultra-violet Good

Chemical ResistanceElectrical Properties Acids - concentrated FairSurface resistivity 103-104 Ohm/sq Acids - dilute GoodVolume resistivity <105 Ohmcm Alcohols Good

Ketones Fair

FilmElongation at Break % 300

ET331080

F Xi

Thickness . . . . . . . . . . . . . . 0.08mm Condition. . . . . . . . . . . . . . . Conductive polymer

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs285-882-691 100 x 100 mm CAD 136.00 CAD 146.00 CAD 169.00 CAD 199.00 CAD 243.00735-334-613 150 x 150 mm CAD 144.00 CAD 158.00 CAD 187.00 CAD 225.00 CAD 280.00916-833-227 300 x 300 mm CAD 169.00 CAD 192.00 CAD 241.00 CAD 302.00 CAD 389.00604-161-424 500 x 500 mm CAD 201.00 CAD 238.00 CAD 314.00 CAD 405.00 CAD 534.00


This material is made from Butyl grafted polyethylene filled with Carbon-black. The volume resistivity is <100,000Ohmcm and surfaceresistivity between 1,000 and 10,000 Ohm/sq.

Polyethylene - High density

HDPE

Common Brand Names : Hostalen HD, Lacqtene HD, Lupolen, Rigidex, Stamylan HD

See also General Information under Polyethylene - Low Density

General Description : A semi-crystalline (typically 70-80%) whitish, semi-opaque commodity thermoplastic withproperties similar to LDPE but significantly stronger and stiffer and with even better chemical resistance. Its impactresistance is reasonably high, and is retained at low temperatures, though that of LDPE is much higher. Its electricalproperties, particularly at high frequencies, are very good but LDPE’s are even better. Its barrier properties, thoughindifferent, are better than those of LDPE.

Applications include a wide range of containers, blown bottles for food, pipe and pipe fittings and packaging films.

Physical Properties Mechanical PropertiesDensity 0.95 g cm-3 Coefficient of friction 0.29Flammability HB Hardness - Rockwell D60-73 - ShoreLimiting oxygen index 17 % Izod impact strength 20-210 J m-1

Radiation resistance Fair Poisson’s ratio 0.46Refractive index 1.54 Tensile modulus 0.5-1.2 GPaResistance to Ultra-violet Poor Tensile strength 15-40 MPaWater absorption - over 24 hours <0.01 %

Chemical ResistanceElectrical Properties Acids - concentrated Good-FairDielectric constant @1MHz 2.3-2.4 Acids - dilute GoodDielectric strength 22 kV mm-1 Alcohols GoodDissipation factor @ 1MHz 1-10 x 10-4 Alkalis GoodSurface resistivity 1013 Ohm/sq Aromatic hydrocarbons FairVolume resistivity 1015-1018 Ohmcm Greases and Oils Good-Fair

Halogenated Hydrocarbons Fair-PoorThermal Properties Halogens Fair-PoorCoefficient of thermal expansion 100-200 x10-6 K-1 Ketones Good-FairHeat-deflection temperature - 0.45MPa 75 CHeat-deflection temperature - 1.8MPa 46 CSpecific heat 1900 J K-1 kg-1



Polymer–Polyethylene-Carbonfilled

78


Telephone +44 1480 424 800 : Fax +44 1480 424 900



HDPE


x10-13 cm3. cm cm-2 s-1 Pa-1 0.3/2


x10-13 cm3. cm cm-2 s-1 Pa-1 2


x10-13 cm3. cm cm-2 s-1 Pa-1 0.1


x10-13 cm3. cm cm-2 s-1 Pa-1 0.4



ET321010

F Xi

Thickness . . . . . . . . . . . . . . 0.01mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs651-381-821 100 x 100 mm CAD 138.00 CAD 152.00 CAD 187.00 CAD 241.00 CAD 321.00422-736-488 150 x 150 mm CAD 144.00 CAD 160.00 CAD 200.00 CAD 260.00 CAD 347.00842-059-318 300 x 300 mm CAD 161.00 CAD 185.00 CAD 239.00 CAD 315.00 CAD 425.00257-424-040 600 x 600 mm CAD 196.00 CAD 234.00 CAD 317.00 CAD 425.00 CAD 582.00


SheetET323100

F Xi

Thickness . . . . . . . . . . . . . . 1mm


ET323200

F Xi

Thickness . . . . . . . . . . . . . . 2mm


ET323250

F Xi

Thickness . . . . . . . . . . . . . . 3mm


ET323280

F Xi

Thickness . . . . . . . . . . . . . . 5mm


ET323300

F Xi

Thickness . . . . . . . . . . . . . . 10mm


ET323320

F Xi

Thickness . . . . . . . . . . . . . . 12mm


ET323340

F Xi

Thickness . . . . . . . . . . . . . . 15mm


ET323360

F Xi

Thickness . . . . . . . . . . . . . . 20mm


Polymer–Polyethylene-Highdensity

79


Telephone +44 1480 424 800 : Fax +44 1480 424 900



HDPE

Sheet

ET323380

F Xi

Thickness . . . . . . . . . . . . . . 25mm


RodET327910

F Xi

Diameter . . . . . . . . . . . . . . . 10mm


ET327925

F Xi

Diameter . . . . . . . . . . . . . . . 25mm


ET327950

F Xi

Diameter . . . . . . . . . . . . . . . 50mm


ET327980

F Xi

Diameter . . . . . . . . . . . . . . . 100mm


ET327990

F Xi

Diameter . . . . . . . . . . . . . . . 150mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs454-528-861 50 mm CAD 304.00 CAD 405.00 CAD 726.00 POA816-109-272 100 mm CAD 362.00 CAD 519.00 CAD 1114.00 POA013-650-271 200 mm CAD 476.00 CAD 829.00 POA706-287-003 500 mm CAD 941.00 POA478-122-042 1000 mm POA

TubeMaterial Biaxially oriented tube

Relative Impact Strength 2-3


GPa 1-1.2


GPa 0.8 - hoop


MPa 70-100

Tensile strength - Transverse MPa 35-40 - hoop

These tubes have been biaxially oriented by a process developed by IRC, Leeds University and have axial and hoop strengths which aresignificantly higher than those of isotropic material.

ET327450

F Xi

Outside Diameter . . . . . . . . 48mm Wall Thickness . . . . . . . . . . 1.1mmColor . . . . . . . . . . . . . . . . . . Yellow Inside Diameter . . . . . . . . . 45.8mmCondition. . . . . . . . . . . . . . . Biaxially Oriented tube




80


Telephone +44 1480 424 800 : Fax +44 1480 424 900



HDPE

Tube

ET327630

F Xi

Outside Diameter . . . . . . . . 63mm Wall Thickness . . . . . . . . . . 3mmColor . . . . . . . . . . . . . . . . . . Yellow Inside Diameter . . . . . . . . . 57mmCondition. . . . . . . . . . . . . . . Biaxially Oriented tube



GranuleET326300

F Xi

Nominal Granule Size . . . . 3mm Color . . . . . . . . . . . . . . . . . . NaturalMelt Flow Rate (MFR). . . . 0.3


ET326310

F Xi



This material is ’natural’ color, has a Melt Flow Rate of 7 and is suitable for Injection moulding.

ET326320

F Xi



This material is ’natural’ color, has a Melt Flow Rate of 0.2 and is suitable for both blow-moulding and extrusion.


81


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyethylene - Low Density

LDPE

Common Brand Names : Alkathene, Carlona, Lacqtene, Lupolen, Stamylan LD

Polyethylenes General A family of closely related commodity thermoplastics that are manufactured in large volumes ina very wide range of grades. Traditionally differentiated by their density (a good measure of degree of crystallinity), froma scientist’s point of view the better distinction is the degree of chain branching. The first polyethylene, later called LDPE,was and is made by a high pressure process using a free radical initiator/catalyst and is a polymer with a high degree ofchain branching. Subsequently low pressure processes using Ziegler-Natta or related catalysts were developed whichproduce a much more linear molecule and generally higher crystallinities. These were and are called high densitypolyethylene (HDPE); this technology is now used to make a family of (chemically) closely related PE’s all of which arelinear - ULDPE (ultra low density ..), LLDPE (linear low ...), MDPE (medium ...), HMWPE (high molecular weight ..) andUHMWPE (ultra high molecular weight ..). On the other hand, PE copolymers (e.g. with vinyl acetate or acrylates) arenormally branched polymers.

General Description : A semi-crystalline (typically around 50%), whitish, semi-opaque commodity thermoplastic that issoft, flexible and tough - even at low temperatures - with outstanding electrical properties but poor temperatureresistance. It also has very good chemical resistance but is prone to environmental stress cracking; it has poor UVresistance (unless modified) and poor barrier properties, except to water.

Applications include containers, chemically resistant linings, films (which are transparent if thin) for packaging etc. andelectrical/electronic applications including cable insulation and cores in UHF cables.

Physical Properties Mechanical PropertiesDensity 0.92 g cm-3 Elongation at break 400 %Flammability HB Hardness - Rockwell D41-46 - ShoreLimiting oxygen index 17 % Izod impact strength >1000 J m-1

Radiation resistance Fair Tensile modulus 0.1-0.3 GPaRefractive index 1.51 Tensile strength 5-25 MPaResistance to Ultra-violet PoorWater absorption - over 24 hours <0.015 % Chemical Resistance

Acids - concentrated Good-FairElectrical Properties Acids - dilute GoodDielectric constant @1MHz 2.2-2.35 Alcohols GoodDielectric strength 27 kV mm-1 Alkalis GoodDissipation factor @ 1MHz 1-10 x 10-4 Aromatic hydrocarbons Fair-PoorSurface resistivity 1013 Ohm/sq Greases and Oils Good-FairVolume resistivity 1015-1018 Ohmcm Halogenated Hydrocarbons Fair-Poor

Halogens Fair-PoorThermal Properties Ketones Good-FairCoefficient of thermal expansion 100-200 x10-6 K-1

Heat-deflection temperature - 0.45MPa 50 CHeat-deflection temperature - 1.8MPa 35 CLower working temperature -60 CSpecific heat 1900-2300 J K-1 kg-1




kV mm-1 200






x10-13 cm3. cm cm-2 s-1 Pa-1 10


x10-13 cm3. cm cm-2 s-1 Pa-1 8


x10-13 cm3. cm cm-2 s-1 Pa-1 0.7


x10-13 cm3. cm cm-2 s-1 Pa-1 2



ET311115

F Xi

Thickness . . . . . . . . . . . . . . 0.015mm

QuantityWeb Code Size 5pcs 10pcs 20pcs578-365-379 150 x 150 mm CAD 174.00 CAD 219.00 CAD 253.00295-672-017 500 x 500 mm CAD 217.00 CAD 281.00



ET311126

F Xi



Contains anti-oxidant additive only. Lay-flat tubing which may be slit along one edge to give a coil of twice the width having a centercrease. Due to the absence of anti-block additive it is difficult to separate the 2 "sides" of this lay flat tubing.

Polymer–Polyethylene-LowDensity

82


Telephone +44 1480 424 800 : Fax +44 1480 424 900



LDPE

Film

ET311130

F Xi

Thickness . . . . . . . . . . . . . . 0.03mm

QuantityWeb Code Size 5pcs 10pcs 20pcs 50pcs751-276-641 150 x 150 mm CAD 137.00 CAD 163.00 CAD 203.00 CAD 319.00909-580-239 300 x 300 mm CAD 147.00 CAD 177.00 CAD 224.00 CAD 352.00697-530-114 600 x 600 mm CAD 168.00 CAD 206.00191-273-369 600 x 900 mm CAD 177.00 CAD 219.00



ET311150

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm


ET311151

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm Condition. . . . . . . . . . . . . . . Additive free polymer




ET311201

F Xi





ET311250

F Xi

Thickness . . . . . . . . . . . . . . 0.125mm


ET311251

F Xi




ET311301

F Xi






83


Telephone +44 1480 424 800 : Fax +44 1480 424 900



LDPE

Film

ET311300

F Xi

Thickness . . . . . . . . . . . . . . 0.2mm


ET311351

F Xi





ET311350

F Xi

Thickness . . . . . . . . . . . . . . 0.25mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs648-414-295 100 x 100 mm CAD 135.00 CAD 151.00 CAD 188.00 CAD 244.00 CAD 290.00051-787-083 150 x 150 mm CAD 145.00 CAD 164.00 CAD 209.00 CAD 273.00 CAD 332.00473-376-556 300 x 300 mm CAD 172.00 CAD 203.00 CAD 271.00 CAD 360.00

ET311452

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm Color . . . . . . . . . . . . . . . . . . Colorless

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs326-087-954 150 x 150 mm CAD 172.00 CAD 198.00 CAD 248.00760-989-090 300 x 300 mm CAD 149.00 CAD 183.00 CAD 214.00 CAD 271.00123-637-351 600 x 600 mm CAD 146.00 CAD 163.00 CAD 206.00 CAD 247.00454-662-960 900 x 900 mm CAD 156.00 CAD 178.00


ET311470

F Xi

Thickness . . . . . . . . . . . . . . 0.75mm Color . . . . . . . . . . . . . . . . . . Colorless

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs418-892-029 150 x 150 mm CAD 132.00 CAD 143.00 CAD 174.00 CAD 202.00 CAD 253.00756-605-650 300 x 300 mm CAD 138.00 CAD 152.00 CAD 188.00 CAD 222.00 CAD 281.00927-650-100 600 x 600 mm CAD 151.00 CAD 170.00 CAD 217.00 CAD 262.00056-701-546 900 x 900 mm CAD 163.00 CAD 188.00 CAD 248.00


SheetET313010

F Xi

Thickness . . . . . . . . . . . . . . 1.0mm


ET313023

F Xi

Thickness . . . . . . . . . . . . . . 2.3mm Condition. . . . . . . . . . . . . . . Stress relieved


ET313048

F Xi

Thickness . . . . . . . . . . . . . . 4.8mm Condition. . . . . . . . . . . . . . . Stress relieved



84


Telephone +44 1480 424 800 : Fax +44 1480 424 900



LDPE

FiberET315710

F Xi

Tex Number . . . . . . . . . . . . 110 Filament Diameter . . . . . . . 0.044mmNumber of Filaments . . . . . 90 Condition. . . . . . . . . . . . . . . Multi-filament YarnCondition. . . . . . . . . . . . . . . Textile grade


RodET317910

F Xi

Diameter . . . . . . . . . . . . . . . 6.35mm Color . . . . . . . . . . . . . . . . . . Natural


ET317920

F Xi



ET317940

F Xi



ET317960

F Xi



ET317970

F Xi



ET317990

F Xi



ET317992

F Xi



ET317995

F Xi



ET317998

F Xi




85


Telephone +44 1480 424 800 : Fax +44 1480 424 900



LDPE

TubeET317100

F Xi


LengthWeb Code438-130-212766-275-921784-488-878061-102-887637-857-408

ET317150

F Xi


LengthWeb Code732-185-064523-129-799391-219-836902-475-965809-495-502

ET317240

F Xi


LengthWeb Code186-948-843368-609-134076-143-230517-906-974738-370-208

ET317640

F Xi


LengthWeb Code296-276-468034-551-868318-981-888872-730-968091-373-149

ET317690

F Xi


LengthWeb Code421-649-286706-160-881270-102-358762-793-605349-211-009

PowderET316050

F Xi



GranuleET316300

F Xi



This material is Research grade and contains NO additives or stabilisers. This material has a Melt Flow Rate of 0.3.

ET316310

F Xi


QuantityWeb Code Weight 1 Pot171-437-698 0.1 kg CAD 141.00920-038-138 0.2 kg CAD 166.00899-234-056 0.5 kg CAD 250.00578-397-989 1 kg CAD 391.00299-740-018 2 kg CAD 673.00

This material is ’natural’ color, has an Melt Flow Rate of 2 and is suitable for Injection moulding and extrusion.


86


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyethylene - Medium Density

MDPE

Physical Properties Mechanical PropertiesDensity 0.935 g cm-3 Elongation at break 100-150 %Flammability HB Hardness - Rockwell D50 - ShoreLimiting oxygen index 17 % Poisson’s ratio 0.46Radiation resistance Fair Tensile strength 12-19 MPaResistance to Ultra-violet PoorWater absorption - equilibrium <0.01 % Chemical Resistance

Acids - concentrated Good-FairElectrical Properties Acids - dilute GoodDielectric constant @1MHz 2.3-2.4 Alcohols GoodDielectric strength 22 kV mm-1 Alkalis GoodDissipation factor @ 1MHz 1-10 x 10-4 Aromatic hydrocarbons FairSurface resistivity 1013 Ohm/sq Greases and Oils Good-FairVolume resistivity 1015-1018 Ohmcm Halogenated Hydrocarbons Fair-Poor


Heat-deflection temperature - 0.45MPa 62 CHeat-deflection temperature - 1.8MPa 43 CLower working temperature -118 CSpecific heat 1900 J K-1 kg-1

Thermal conductivity @^C 0.45-0.52 W m-1 K-1

PowderEV306010

F Xi

Max. Particle size . . . . . . . 350micron


Polyethylene - U.H.M.W.

UHMW PE

Common Brand Names : Hostalen GUR, Stamylan UH

See also General Information under Polyethylene - Low Density

General Description : A semi-crystalline, whitish and effectively opaque engineering thermoplastic which, chemically, isa very high molecular weight (3-6 million) HDPE. As a result it has an extremely high (effectively infinite) melt viscosityand can only be processed by powder sintering methods. It also has outstanding toughness and cut and wear resistanceand very good chemical resistance, somewhat better than that of HDPE.

Applications include many "wear parts" (eg bottle handling machine components), gears, bearings, artificial joints andmarine quay headings.

Fibers of very high molecular orientation can also be made from polyethylene of very high molecular weight by gelspinning and subsequent drawing to give fibers which are reported to be up to 85% crystalline and with 95% parallelorientation. They are known as Ultra High Modulus or High Performance Polyethylene fiber (UHMPE or HPPE). Amodest range of fiber, braided cord and fabrics are avilable from Goodfellow.

Like Kevlar, these fibers have very high tensile properties and (small) negative CTE’s. On a volume basis, their tensileproperties are broadly similar to Kevlar’s but, on a weight basis, they are superior thanks to an almost 50% densityadvantage - but they are not up to the properties of carbon fiber on either basis. Their energy absorption and acousticvelocity characteristics are superior to Kevlar’s both as fabric and composite. Applications are being developedparticularly in the areas of ballistic protection and ropes (in the widest sense).

Physical Properties Mechanical PropertiesDensity 0.94 g cm-3 Coefficient of friction 0.1-0.2Flammability HB Elongation at break 500 %Limiting oxygen index 17 % Hardness - Rockwell R50-70Radiation resistance Fair Izod impact strength >1000 J m-1

Resistance to Ultra-violet Poor Poisson’s ratio 0.46Water absorption - over 24 hours <0.01 % Tensile modulus 0.2-1.2 GPa

Tensile strength 20-40 MPaElectrical PropertiesDielectric constant @1MHz 2.3 Chemical ResistanceDielectric strength 28 kV mm-1 Acids - concentrated Good-FairDissipation factor @ 1MHz 1-10 x 10-4 Acids - dilute GoodSurface resistivity 1013 Ohm/sq Alcohols GoodVolume resistivity 1018 Ohmcm Alkalis Good

Aromatic hydrocarbons FairThermal Properties Greases and Oils Good-FairCoefficient of thermal expansion 130-200 x10-6 K-1 Halogenated Hydrocarbons Fair-PoorHeat-deflection temperature - 0.45MPa 69 C Halogens Fair-PoorHeat-deflection temperature - 1.8MPa 42 C Ketones Good-FairSpecific heat 1900 J K-1 kg-1



Polymer–Polyethylene-Medium

Density

87


Telephone +44 1480 424 800 : Fax +44 1480 424 900



UHMW PE

FilmET301075

F Xi

Thickness . . . . . . . . . . . . . . 0.075mm



ET301200

F Xi

Thickness . . . . . . . . . . . . . . 0.2mm



ET301400

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm



SheetET303060

F Xi

Thickness . . . . . . . . . . . . . . 1.2mm


ET303100

F Xi

Thickness . . . . . . . . . . . . . . 2.0mm


ET303130

F Xi

Thickness . . . . . . . . . . . . . . 3.15mm


ET303250

F Xi

Thickness . . . . . . . . . . . . . . 5.0mm


ET303400

F Xi

Thickness . . . . . . . . . . . . . . 10.0mm


ET303450

F Xi

Thickness . . . . . . . . . . . . . . 25.0mm


Polymer–Polyethylene-U.H.M.W

.

88


Telephone +44 1480 424 800 : Fax +44 1480 424 900



UHMW PE

FabricET303510

F Xi

Weight.m-2. . . . . . . . . . . . . 88g Ends x Picks/10cm . . . . . . 177x177

Warp Yarn . . . . . . . . . . . . . 24Tex Weft Yarn . . . . . . . . . . . . . . 24TexWeave. . . . . . . . . . . . . . . . . Plain Thickness . . . . . . . . . . . . . . 0.15mmCondition. . . . . . . . . . . . . . . Woven from Spectra1 1000.


ET303530

F Xi


Warp Yarn . . . . . . . . . . . . . 133Tex Weft Yarn . . . . . . . . . . . . . . 133TexWeave. . . . . . . . . . . . . . . . . Plain Thickness . . . . . . . . . . . . . . 0.28mm


Woven from Spectra1 ’B’ yarn of ultra-high strength and modulus. The yarn is composed of 120 filaments, each having a diameter of0.028mm.

ET303540

F Xi


Warp Yarn . . . . . . . . . . . . . 72Tex Weft Yarn . . . . . . . . . . . . . . 72TexWeave. . . . . . . . . . . . . . . . . 4-end Satin Thickness . . . . . . . . . . . . . . 0.38mm


Woven from Spectra1 ’B’ yarn of ultra-high strength and modulus. The yarn is composed of 120 filaments, each having a diameter of0.028mm.

ET303560

F Xi




Woven from ultra-high strength and modulus yarn The yarn is composed of 118 filaments each of diameter 0.038mm.

ET303580

F Xi


Warp Yarn . . . . . . . . . . . . . 133Tex Weft Yarn . . . . . . . . . . . . . . 133TexWeave. . . . . . . . . . . . . . . . . 8 end Satin Thickness . . . . . . . . . . . . . . 0.45mm


Woven from ultra-high strength and modulus yarn The yarn is composed of 118 filaments each of diameter 0.038mm.

FiberMaterial Dyneema1 Spectra A1 Spectra B1

Density g cm-3 0.97 0.97 0.97

Extension to break % 3.5 3.5 2.7

Modulus GPa 87 120 170

Specific Modulus cN/tex 9000 12500 17500

Shrinkage @100C % <1

Specific Tenacity cN/tex 265 265 310

Thermal Conductivity @23C W m-1 K-1 20 (axial)

ET305711

F Xi

Tex Number . . . . . . . . . . . . 145 Filament Diameter . . . . . . . 0.012mmNumber of Filaments . . . . . 1300 Condition. . . . . . . . . . . . . . . Multi-filament Yarn


Yarn grade : Dyneema1 Ultra-high strength and modulus.

ET305710

F Xi

Tex Number . . . . . . . . . . . . 176 Filament Diameter . . . . . . . 0.012mmNumber of Filaments . . . . . 1600 Condition. . . . . . . . . . . . . . . Multi-filament Yarn


Yarn grade : Dyneema1 Ultra-high strength and modulus.


.

89


Telephone +44 1480 424 800 : Fax +44 1480 424 900



UHMW PE

Fiber

ET305720

F Xi

Tex Number . . . . . . . . . . . . 1670 Cord diameter . . . . . . . . . . 1.5mmCondition. . . . . . . . . . . . . . . Braided Cord

QuantityWeb Code Length 1 Reel027-575-953 1 m CAD 144.00446-995-852 2 m CAD 161.00874-475-163 5 m CAD 201.00309-392-061 10 m CAD 261.00674-007-265 20 m CAD 328.00250-902-080 50 m CAD 505.00362-753-399 100 m CAD 774.00

Yarn grade : Dyneema1 Breaking load : 720kg.

ET305740

F Xi

Tex Number . . . . . . . . . . . . 26720 Cord diameter . . . . . . . . . . 6mmCondition. . . . . . . . . . . . . . . Braided Cord Condition. . . . . . . . . . . . . . . Supplied with a Polyester over-

braid


Yarn grade : Dyneema1 Breaking load : 720kg.

RodET307930

F Xi

Diameter . . . . . . . . . . . . . . . 6.35mm Condition. . . . . . . . . . . . . . . Machined

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs272-870-732 100 mm CAD 138.00 CAD 152.00 CAD 185.00 CAD 230.00 CAD 294.00108-843-372 200 mm CAD 148.00 CAD 166.00 CAD 206.00 CAD 260.00 CAD 336.00605-414-113 500 mm CAD 167.00 CAD 192.00 CAD 248.00 CAD 319.00676-774-852 1000 mm CAD 188.00 CAD 222.00 CAD 296.00

ET307970

F Xi



ET307990

F Xi



ET307992

F Xi

Diameter . . . . . . . . . . . . . . . 25mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs349-753-569 100 mm CAD 170.00 CAD 196.00 CAD 259.00 CAD 348.00 CAD 469.00719-197-049 200 mm CAD 185.00 CAD 216.00 CAD 291.00 CAD 393.00899-633-538 500 mm CAD 213.00 CAD 257.00 CAD 354.00454-192-383 1000 mm CAD 245.00 CAD 302.00 CAD 426.00

ET307994

F Xi

Diameter . . . . . . . . . . . . . . . 50mm


ET307996

F Xi

Diameter . . . . . . . . . . . . . . . 100mm


ET307999

F Xi

Diameter . . . . . . . . . . . . . . . 152.4mm



.

90


Telephone +44 1480 424 800 : Fax +44 1480 424 900



UHMW PE

PowderET306010

F Xi



GranuleET306300

F Xi

Nominal Granule Size . . . . 2mm Color . . . . . . . . . . . . . . . . . . NaturalCondition. . . . . . . . . . . . . . . Injection moulding grade


Polyethylene naphthalate

PEN

Common Brand Names : Kaladex, Kalidar

General Description : A polyester that is chemically quite similar to PET but which is more temperature resistant. So faravailable only as biaxially oriented and heat stabilized films, they are semi-crystalline and colorless, either crystal clear orslightly hazy (the latter are available from Goodfellow stock). Compared to their PET equivalents, they start to shrinksignificantly at 190C rather than 150C and are certified for long term electrical use at 155C rather than 105/130C. Theirtensile strengths are similar, but the modulus of PEN films is higher - say 25% at ambient temperatures but several timeshigher in the 100-150C region. They also have better UV resistance and barrier properties and are more resistant tohydrolysis in alkaline or very hot aqueous conditions. They are, however, more expensive and have a lower flex life.

Applications for the films are mainly in the electrical and electronic areas.

Physical Properties Mechanical PropertiesDensity 1.36 g cm-3 Coefficient of friction 0.27 - biax filmFlammability VTM-2 - UL94, 0.075mm Elongation at break 60 - biax film %Optical transmission 84 @ 0.075mm % Tensile modulus 5-5.5 - biax film GPa

Tensile strength 200 - biax film MPaElectrical PropertiesDielectric constant @1MHz 3.2 @ 10KHz Chemical ResistanceDielectric strength 160 @ 0.075mm kV mm-1 Acids - concentrated Good-PoorDissipation factor @ 1MHz 0.0048 @ 10KHz Acids - dilute GoodSurface resistivity 1014 Ohm/sq Alcohols GoodVolume resistivity 1015 Ohmcm Alkalis Good

Aromatic hydrocarbons GoodThermal Properties Greases and Oils GoodCoefficient of thermal expansion 20-21 - biax film x10-6 K-1 Halogenated Hydrocarbons GoodUpper working temperature 155 C Ketones Good


x10-13 cm3. cm cm-2 s-1 Pa-1 0.01


x10-13 cm3. cm cm-2 s-1 Pa-1 0.006


Shrinkage % 0.8 - 5min @ 190C

ES361010

Xi

Thickness . . . . . . . . . . . . . . 0.0013mm Condition. . . . . . . . . . . . . . . Biaxially Oriented




.

91


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEN

Film

ES361015

Xi




ES361025

Xi




ES361050

Xi




ES361075

Xi




ES361090

Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs446-105-880 125 x 150 mm CAD 168.00 CAD 193.00 CAD 249.00 CAD 328.00587-279-422 125 x 300 mm CAD 184.00 CAD 215.00 CAD 284.00 CAD 377.00161-544-121 150 x 150 mm CAD 172.00 CAD 198.00 CAD 257.00 CAD 339.00108-447-046 300 x 300 mm CAD 213.00 CAD 256.00 CAD 350.00 CAD 469.00


ES361150

Xi




Polymer–Polyethylenenaphthalate

92


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PEN

LaminateES361620

Xi

Thickness . . . . . . . . . . . . . . 0.047mm Polymer Thickness . . . . . . 0.012mmBacking Material . . . . . . . . 0.018mm Copper Adhesive . . . . . . . . . . . . . . . Polyurethane



ES361621

Xi

Thickness . . . . . . . . . . . . . . 0.050mm Polymer Thickness . . . . . . 0.012mmBacking Material . . . . . . . . 0.025mm Aluminium Adhesive . . . . . . . . . . . . . . . Epoxy



RodES367940

Xi



ES367950

Xi



GranuleES366300

Xi

Nominal Granule Size . . . . 5mm Condition. . . . . . . . . . . . . . . Additive free polymer

QuantityWeb Code Weight 1 Pot882-593-610 100 g CAD 172.00292-068-522 200 g CAD 207.00324-205-735 500 g CAD 246.00525-714-603 1000 g CAD 294.00508-570-720 2000 g CAD 386.00 P

olymer–Polyethylenenaphthalate

93


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyethylene terephthalate

Polyester, PET, PETP

Common Brand Names : Arnite, Dacron, Hostaphan, Impet, Melinar, Melinex, Mylar, Rynite, Terylene, Trevira

General Description: The most common thermoplastic polyester, this polymer is often called just "polyester". This oftencauses confusion - not only is the chemically similar PBT also a (thermoplastic) polyester, the most common resinsystem used in GRP is also a polyester system - and also often called just "polyester". (In this latter case, however, thepolyesters are chemically unsaturated and are "free-radical polymerized" into a thermoset).

PET is a hard, stiff, strong dimensionally stable material that absorbs very little water. It has good gas barrier propertiesand good chemical resistance except to alkalis (which hydrolyse it). Its crystallinity varies from amorphous to fairly highcrystalline; it can be highly transparent and colorless but thicker sections are usually opaque and off-white.

Applications include bottles and electrical components but it is probably most widely known as the biaxially oriented andthermally stabilized films used for capacitators, graphics, film base and recording tapes etc.

Physical Properties Mechanical PropertiesDensity 1.3-1.4 g cm-3 Coefficient of friction 0.2-0.4Flammability HB Hardness - Rockwell M94-101Limiting oxygen index 21 % Izod impact strength 13-35 J m-1

Radiation resistance Good Poisson’s ratio 0.37-0.44(oriented)Refractive index 1.58-1.64 Tensile modulus 2-4 GPaResistance to Ultra-violet Fair? Tensile strength 80, for biax film 190-260 MPaWater absorption - equilibrium <0.7 %Water absorption - over 24 hours 0.1 % Chemical Resistance

Acids - concentrated Good-PoorElectrical Properties Acids - dilute GoodDielectric constant @1MHz 3.0 Alcohols GoodDielectric strength 17 kV mm-1 Alkalis PoorDissipation factor @ 1kHz 0.002 Aromatic hydrocarbons Good-FairSurface resistivity 1013 Ohm/sq Greases and Oils GoodVolume resistivity >1014 Ohmcm Halogenated Hydrocarbons Good-Poor


Heat-deflection temperature - 0.45MPa 115 CHeat-deflection temperature - 1.8MPa 80 CLower working temperature -40 to -60 CSpecific heat 1200 - 1350 J K-1 kg-1




kV mm-1 300





x10-13 cm3. cm cm-2 s-1 Pa-1 0.2


x10-13 cm3. cm cm-2 s-1 Pa-1 0.4


x10-13 cm3. cm cm-2 s-1 Pa-1 0.004


x10-13 cm3. cm cm-2 s-1 Pa-1 0.03




Thermal Conductivity @23C W m-1 K-1 0.13-0.15

ES301005

Xi

Thickness . . . . . . . . . . . . . . 0.0005mm Coil width . . . . . . . . . . . . . . 315mmCondition. . . . . . . . . . . . . . . Biaxially Oriented

Coil Width 315mm QuantityWeb Code Length 1 Reel777-190-564 0.1 m CAD 413.00673-214-694 0.2 m CAD 486.00184-119-488 0.5 m CAD 647.00055-309-801 1 m CAD 852.00505-186-832 2 m CAD 1186.00092-446-056 5 m CAD 2170.00

ES301007

Xi



Polymer–Polyethyleneterephthalate

94


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Film

ES301009

Xi



ES301015

Xi



ES301025

Xi



ES301030

Xi



ES301035

Xi



ES301061

Xi


Coil Width 315mm QuantityWeb Code Length 1 Reel407-677-453 0.5 m CAD 162.00959-685-351 1 m CAD 183.00960-666-362 2 m CAD 215.00083-287-977 5 m CAD 286.00410-993-062 10 m CAD 378.00374-131-211 20 m CAD 531.00

ES301130

Xi



ES301230

Xi




95


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Film

ES301250

Xi




ES301300

Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs088-305-483 150 x 150 mm CAD 128.00 CAD 144.00 CAD 182.00 CAD 237.00 CAD 300.00038-182-800 300 x 300 mm CAD 147.00 CAD 170.00 CAD 224.00 CAD 297.00 CAD 384.00772-856-273 600 x 600 mm CAD 185.00 CAD 224.00 CAD 308.00 CAD 416.00 CAD 553.00


ES301401

Xi

Thickness . . . . . . . . . . . . . . 0.1mm Color . . . . . . . . . . . . . . . . . . BlackCondition. . . . . . . . . . . . . . . Biaxially Oriented


ES301400

Xi



ES301425

Xi




ES301440

Xi




ES301451

Xi

Thickness . . . . . . . . . . . . . . 0.25mm Color . . . . . . . . . . . . . . . . . . Opaque whiteCondition. . . . . . . . . . . . . . . Biaxially Oriented Condition. . . . . . . . . . . . . . . Printable both sides


ES301445

Xi

Thickness . . . . . . . . . . . . . . 0.25mm Condition. . . . . . . . . . . . . . . Amorphous




96


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Film

ES301450

Xi




ES301455

Xi




ES301465

Xi



ES301460

Xi




ES301485

Xi



Metallized FilmES301820

Xi

Thickness . . . . . . . . . . . . . . 0.002mm Coil width . . . . . . . . . . . . . . 315mmOhms/Square . . . . . . . . . . . 1.5 Metallized with . . . . . . . . . . AluminumMetallized width . . . . . . . . . 305mm

Coil Width 315mm QuantityWeb Code Length 1 Reel305-593-509 0.2 m CAD 359.00021-621-576 0.5 m CAD 433.00685-250-844 1 m CAD 548.00917-421-823 2 m CAD 770.00

ES301835

Xi

Thickness . . . . . . . . . . . . . . 0.0035mm Coil width . . . . . . . . . . . . . . 300mmOhms/Square . . . . . . . . . . . 1.5 Metallized with . . . . . . . . . . Aluminum


ES301840

Xi

Thickness . . . . . . . . . . . . . . 0.004mm Coil width . . . . . . . . . . . . . . 9mmOhms/Square . . . . . . . . . . . 3 Metallized with . . . . . . . . . . Aluminum


This coil has a strip 2mm wide on one edge which is NOT metallized.


97


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Metallized Film

ES301855

Xi

Thickness . . . . . . . . . . . . . . 0.005mm Coil width . . . . . . . . . . . . . . 315mmOhms/Square . . . . . . . . . . . 1.5 Metallized with . . . . . . . . . . AluminumMetallized width . . . . . . . . . 305mm


ES301865

Xi

Thickness . . . . . . . . . . . . . . 0.006mm Coil width . . . . . . . . . . . . . . 315mmOhms/Square . . . . . . . . . . . 1.4 Metallized on both sides

with . . . . . . . . . . . . . . . . . . .Aluminum (0.7 ohms/square)

Metallized width . . . . . . . . . 305mm


Suitable for use in most alpha-particle counters.

ES301860

Xi


Coil Width 27mm QuantityWeb Code Length 1 Reel527-703-150 1 m CAD 148.00962-887-887 2 m CAD 162.00360-985-908 5 m CAD 190.00123-243-947 10 m CAD 222.00405-489-115 50 m CAD 373.00686-144-766 100 m CAD 501.00

ES301912

Xi




ES301913

Xi



ES301923

Xi





98


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Metallized Film

ES301900

Xi

Thickness . . . . . . . . . . . . . . 0.036mm Ohms/Square . . . . . . . . . . . >2500Metallized with . . . . . . . . . . Stainless Steel


Disks QuantityWeb Code Diameter 10 Disks 20 Disks 25 Disks 50 Disks678-433-230 6 mm CAD 277.00 CAD 314.00 CAD 327.00 CAD 394.00804-152-223 8 mm CAD 279.00 CAD 317.00 CAD 330.00 CAD 398.00519-034-244 10 mm CAD 281.00 CAD 319.00 CAD 333.00 CAD 402.00879-275-536 12.5 mm CAD 284.00 CAD 323.00 CAD 337.00 CAD 408.00909-446-804 25 mm CAD 296.00 CAD 340.00 CAD 356.00 CAD 435.00680-855-798 50 mm CAD 320.00 CAD 374.00 CAD 394.00 CAD 488.00106-973-624 100 mm CAD 368.00 CAD 442.00 CAD 471.00 CAD 596.00

Stainless Steel thickness : 0.01 microns

ES301920

Xi

Thickness . . . . . . . . . . . . . . 0.036mm Ohms/Square . . . . . . . . . . . 25Metallized with . . . . . . . . . . StSt/Cu/StSt



Metallic film is Stainless Steel-Copper-Stainless Steel with thickness : 0.014 microns

ES301902

Xi

Thickness . . . . . . . . . . . . . . 0.036mm Ohms/Square . . . . . . . . . . . 200Metallized with . . . . . . . . . . Stainless Steel



ES301911

Xi

Thickness . . . . . . . . . . . . . . 0.036mm Ohms/Square . . . . . . . . . . . 200Metallized with . . . . . . . . . . Titanium


Titanium Thickness : 0.014 microns

ES301901

Xi

Thickness . . . . . . . . . . . . . . 0.036mm Ohms/Square . . . . . . . . . . . 700Metallized with . . . . . . . . . . Stainless Steel



ES301910

Xi

Thickness . . . . . . . . . . . . . . 0.036mm Ohms/Square . . . . . . . . . . . 700Metallized with . . . . . . . . . . Titanium


Titanium thickness : 0.011 microns


99


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Metallized Film

ES301955

Xi




ES301980

Xi




LaminateES301520

Xi

Thickness . . . . . . . . . . . . . . 0.06mm Polymer Thickness . . . . . . 0.025mmBacking Material . . . . . . . . 0.018mm Copper



ES301532

Xi




ES301554

Xi





100


Telephone +44 1480 424 800 : Fax +44 1480 424 900




SheetES303010

Xi

Thickness . . . . . . . . . . . . . . 1mm Condition. . . . . . . . . . . . . . . Amorphous


ES303020

Xi



ES303030

Xi



ES303050

Xi

Thickness . . . . . . . . . . . . . . 5mm


ES303100

Xi

Thickness . . . . . . . . . . . . . . 10mm


ES303250

Xi

Thickness . . . . . . . . . . . . . . 25mm


FabricES303520

Xi





Polyester fiber: Laminates based on this lack stiffness but have excellent impact resistance properties. Plain weave: Warp (longitudinal)yarns (ends) pass over and under alternate weft (transverse) yarns (picks) and vice-versa.

MeshES308704

Xi



ES308710

Xi




101


Telephone +44 1480 424 800 : Fax +44 1480 424 900




FiberMaterial Medium High tenacity

Density g cm-3 1.39 1.39

Extension to break % 36 13-16

Modulus GPa 9-11

Specific Modulus cN/tex 700-800

Shrinkage @100C % 4 1.5-6

Specific Tenacity cN/tex 36 70-80

ES305710

Xi




ES305720

Xi




ES305730

Xi




MonofilamentES305910

Xi

Diameter . . . . . . . . . . . . . . . 0.1mm


ES305920

Xi

Diameter . . . . . . . . . . . . . . . 0.2mm


ES305940

Xi

Diameter . . . . . . . . . . . . . . . 0.4mm


ES305950

Xi

Diameter . . . . . . . . . . . . . . . 0.5mm



102


Telephone +44 1480 424 800 : Fax +44 1480 424 900




Monofilament

ES305980

Xi

Diameter . . . . . . . . . . . . . . . 0.8mm


ES305990

Xi

Diameter . . . . . . . . . . . . . . . 0.9mm


RodES307906

Xi

Diameter . . . . . . . . . . . . . . . 6mm


ES307910

Xi

Diameter . . . . . . . . . . . . . . . 10mm


ES307925

Xi

Diameter . . . . . . . . . . . . . . . 25mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs750-247-722 100 mm CAD 133.00 CAD 154.00 CAD 202.00 CAD 254.00 CAD 340.00780-968-315 500 mm CAD 172.00 CAD 208.00 CAD 289.00 CAD 424.00621-041-825 1000 mm CAD 201.00 CAD 249.00 CAD 401.00

GranuleES306310

Xi



ES306311

Xi



Polyhydroxyalkaonate - Biopolymer

PHA

Physical Properties Mechanical PropertiesDensity 1.23 g cm-3 Elongation at break 35 %Water absorption <0.4 % Tensile strength 30 MPa

GranulePH326300

F Xi




103


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyhydroxybutyrate - Biopolymer

PHB

General Description : PHB and its copolymers with polyhydroxyvalerate (PHV) are melt-processable semi-crystallinethermoplastics made by biological fermentation from renewable carbohydrate feedstocks. They have been described as"the first example of a true thermoplastic from biotechnology" and are also biodegradeable. Although quite stable undereveryday conditions they degrade slowly in the body and when composted or in landfill sites. [The HB monomer unit is anormal constituent of human blood.]

Their chemical resistance is somewhat limited as they are attacked by acids and alkalis and dissolve in chlorinatedsolvents. Rather remarkably, they are optically active polymers with a chiral site in each molecular repeat unit, all ofwhich are in the D- (or R) configuration.

PHB homopolymer is a stiff and rather brittle polymer of high crystallinity, whose mechanical properties are not unlikethose of polystyrene, though it is less brittle and more temperature resistant. Hence, copolymers are preferred forgeneral purposes. It is believed that the most likely area for the application of homopolymer is in the medical/biologicalfields.

Physical Properties Mechanical PropertiesDensity 1.25 g cm-3 Izod impact strength 35-60 J m-1

Resistance to Ultra-violet Fair Tensile modulus 3.5 GPaTensile strength 40 MPa

Electrical PropertiesDielectric constant @1MHz 3.0 Chemical ResistanceVolume resistivity 1016 Ohmcm Acids - dilute Fair

Alcohols FairThermal Properties Alkalis PoorUpper working temperature 95 C Greases and Oils Good

SheetBU393130

F Xi

Thickness . . . . . . . . . . . . . . 1.35mm Grade . . . . . . . . . . . . . . . . . Technical Grade


Non-Woven FabricBU393710

F Xi

Weight.m-2. . . . . . . . . . . . . 150g Grade . . . . . . . . . . . . . . . . . Research Grade

Thickness . . . . . . . . . . . . . . 0.125mm


RodBU397920

F Xi

Diameter . . . . . . . . . . . . . . . 15mm


GranuleBU396311

F Xi



Polyhydroxybutyrate/Polyhydroxyvalerate 2% - Biopolymer

Biopolymer

PowderBV336010

F Xi

Max. Particle size . . . . . . . 300micron


Polymer–Polyhydroxybutyrate

-Biopolymer

104


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PHB92/PHV 8

General Description : See also PHB. PHB/PHV copolymers are used in preference to PHB homopolymer for generalpurposes (e.g. moulding containers) in order to obtain a better balance of stiffness and toughness. PHV contents of 5 -20% give a useful range of properties broadly similar to those of the polyolefins (the polyethylenes and polypropylene).They melt at lower temperatures than the homopolymer, giving a useful improvement in melt-processability. Their otherproperties are similar to those of PHB.

They are being used for biodegradeable containers (of which shampoo bottles are the most high-profile example) andother articles difficult to recycle e.g. disposable razors or medically contaminated articles.

Physical Properties Mechanical PropertiesDensity 1.25 g cm-3 Elongation at break 15 %Resistance to Ultra-violet Fair Izod impact strength 100 J m-1

Tensile modulus 0.9 GPaElectrical Properties Tensile strength 28 MPaDielectric constant @1MHz 3.0Volume resistivity 1016 Ohmcm Chemical Resistance

Acids - dilute FairThermal Properties Alcohols FairSpecific heat 1400 J K-1 kg-1 Alkalis PoorThermal conductivity @23C 0.15 W m-1 K-1 Greases and Oils Good

FilmExtension to break -Longitudinal

% 7-15


% 5-10


x10-13 cm3. cm cm-2 s-1 Pa-1 0.1-0.2



GPa 0.6-1.0


GPa 0.8-1.2


MPa 25-30

Tensile strength - Transverse MPa 25-30

BV301010

F Xi

Thickness . . . . . . . . . . . . . . 0.01mm



BV301025

F Xi

Thickness . . . . . . . . . . . . . . 0.025mm



BV301050

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm



Lay-flat tubing which may be slit along one edge to give a coil of twice the width having a center crease. Polymer–Polyhydroxybutyrate/Polyhydroxyvalerate

8%

-Biopolymer

105


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PHB88/PHV12

General Description : See also PHB. PHB/PHV copolymers are used in preference to PHB homopolymer for generalpurposes (e.g. moulding containers) in order to obtain a better balance of stiffness and toughness. PHV contents of 5 -20% give a useful range of properties broadly similar to those of the polyolefins (the polyethylenes and polypropylene).They melt at lower temperatures than the homopolymer, giving a useful improvement in melt-processability. Their otherproperties are similar to those of PHB.

They are being used for biodegradeable containers (of which shampoo bottles are the most high-profile example) andother articles difficult to recycle e.g. disposable razors or medically contaminated articles.

Physical Properties Mechanical PropertiesDensity 1.25 g cm-3 Elongation at break 35 %Resistance to Ultra-violet Fair Izod impact strength 200 J m-1

Tensile modulus 0.5 GPaElectrical Properties Tensile strength 23 MPaDielectric constant @1MHz 3.0Volume resistivity 1016 Ohmcm Chemical Resistance

Acids - dilute FairThermal Properties Alcohols FairSpecific heat 1400 J K-1 kg-1 Alkalis PoorThermal conductivity @23C 0.15 W m-1 K-1 Greases and Oils Good

GranuleBV326301

F Xi

Nominal Granule Size . . . . 5mm Condition. . . . . . . . . . . . . . . 10% Plasticised pellets (citric es-ter)


Polyimide

PI

Common Brand Names : Kapton, Kinel, Upilex, Upimol, Vespel

General Description : Normally infusible, colored (often amber) high performance polymers with predominantly aromaticmolecules of high thermal stability. Semi-fabricated shapes are usually supplied by the polymer manufacturer and madeby powder sintering or working with more tractable pre-cursors and completing polymerization in final form, though somemelt-processable grades of resin are available. They have excellent high temperature properties and radiationresistance, inherently low flammability and smoke emission, low creep and high wear resistance and are very expensive.They have moderately high water absorption and are prone to hydrolysis and attack by alkalis and concentrated acids.

A widely used form is Kapton1 film, of which Goodfellow stock the full range from 0.008 to 0.125mm and which is atransparent amber color. Thicker polyimide items are usually opaque. A range of Kapton film variants are also availablefrom stock. In each of these, a large measure of Kapton’s basic properties are combined with an extra attribute egincreased electrical or thermal conductivity, improved corona resistance, opacity and thermoplasticity.

Films are used for capacitators, insulation, printed circuit boards and in aerospace; other applications include enginecomponents, bearings, and mechanical parts exposed to radiation.

Explanation of Kapton Type lettersHN Regular Kapton - transparent amberCB Opaque black version of HNMT Aluminum oxide filled, increased thermal conductivity, opaque yellowMTB Opaque black version of MTCR Improved corona resistance - translucent yellowXC Electrically (semi-)conductive - opaque blackKJ Thermoplastic - transparent yellow

Physical Properties Mechanical PropertiesDensity 1.42 g cm-3 Coefficient of friction 0.42Flammability V0 Elongation at break 8-70 %Limiting oxygen index 53 % Hardness - Rockwell E52-99Radiation resistance Good Izod impact strength 80 J m-1

Refractive index 1.66 Tensile modulus 2.0-3.0 GPaResistance to Ultra-violet Poor Tensile strength 70-150 MPaWater absorption - over 24 hours 0.2-2.9 %

Chemical ResistanceElectrical Properties Acids - concentrated PoorDielectric constant @1MHz 3.4 Acids - dilute FairDielectric strength 22 kV mm-1 Alcohols PoorDissipation factor @ 1kHz 0.0018 Alkalis PoorSurface resistivity 1016 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 1018 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons GoodThermal Properties Halogens FairCoefficient of thermal expansion 30-60 x10-6 K-1 Ketones GoodHeat-deflection temperature - 1.8MPa 360 CLower working temperature -270 CSpecific heat 1090 J K-1 kg-1



Polymer–Polyhydroxybutyrate/Polyhydroxyvalerate

12%

-Biopolymer

106


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

FilmMaterial HN CB MT MTB CR XC KJ


x10-6 K-1 20 60

Corona Resistance @ 20kVmm-1 50 Hz

hr 200 >100,000

Density g cm-3 1.42 1.42 1.85 1.85 1.54 1.42 1.36

Dielectric Constant @ 1kHz 3.4 4.5 4.2 4.2 3.9 3.4

Dielectric Constant @ 1MHz 3.4


kV mm-1 300 80 165 70 @ 0.075mm 290 200

Dissipation Factor @1kHz 0.0018 0.19 0.003 0.0016


Elongation at Break % 70 45 50-60 50-60 45 20-30 150

Initial Tear Strength g mm-1 20

Moisture absorption % 2.8 3 3 1


x10-13 cm3. cm cm-2 s-1 Pa-1 0.5


x10-13 cm3. cm cm-2 s-1 Pa-1 1


x10-13 cm3. cm cm-2 s-1 Pa-1 0.03


x10-13 cm3. cm cm-2 s-1 Pa-1 0.1



Shrinkage @400C % 1.2-1.5 1 1 1 0.6

Surface Resistivity Ohm/sq 3.6x1016 50-1x109

Tensile modulus GPa 2.5 2.7 4 4 3.2 3.3-3.6 2.7

Tensile strength MPa 230 135 125 125 150 110-120 135

Thermal Conductivity @23C W m-1 K-1 0.16 0.45 0.45 0.38 0.12

Volume Resistivity Ohmcm 1.5x1017 1013 1014 1014 2.3x1016 2.5x1017

IM301130

Xi

Thickness . . . . . . . . . . . . . . 0.013mm Grade . . . . . . . . . . . . . . . . . Kapton HN1



IM301202

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Coil width . . . . . . . . . . . . . . 20mmAdhesive coated tape . . . . Total thickness : 0.06mm

Coil Width 20mm QuantityWeb Code Length 1 Reel981-467-720 1 rolls CAD 283.00683-465-793 2 rolls CAD 438.00

Supplied in rolls of length 33m only.

IM301213

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Color . . . . . . . . . . . . . . . . . . BlackGrade . . . . . . . . . . . . . . . . . Kapton MTB1


IM301214

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Color . . . . . . . . . . . . . . . . . . BlackGrade . . . . . . . . . . . . . . . . . Kapton CB1



Polymer–Polyimide

107


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

Film

IM301212

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Grade . . . . . . . . . . . . . . . . . Kapton CR1



IM301210

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Grade . . . . . . . . . . . . . . . . . Kapton MT1



IM301200

Xi




IM301219

Xi

Thickness . . . . . . . . . . . . . . 0.030mm Color . . . . . . . . . . . . . . . . . . BlackGrade . . . . . . . . . . . . . . . . . Kapton XC1 Surface Resistivity . . . . . . . 107 Ohm/sq.



IM301301

Xi

Thickness . . . . . . . . . . . . . . 0.05mm Grade . . . . . . . . . . . . . . . . . Upilex



IM301300

Xi




Polymer–Polyimide

108


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

Film

IM301402

Xi

Thickness . . . . . . . . . . . . . . 0.075mm Grade . . . . . . . . . . . . . . . . . Kapton MT1



IM301400

Xi




IM301414

Xi

Thickness . . . . . . . . . . . . . . 0.075mm Grade . . . . . . . . . . . . . . . . . Kapton KJ1


IM301450

Xi




IM301455

Xi

Thickness . . . . . . . . . . . . . . 0.23mm Grade . . . . . . . . . . . . . . . . . Cirlex CL-HN


IM301465

Xi



IM301470

Xi

Thickness . . . . . . . . . . . . . . 0.5mm Grade . . . . . . . . . . . . . . . . . Upilex


Metallized FilmIM301825

Xi

Thickness . . . . . . . . . . . . . . 0.025mm Condition. . . . . . . . . . . . . . . Metallised on one side with 50-100nm Aluminium

Grade . . . . . . . . . . . . . . . . . Kapton HN1



Polymer–Polyimide

109


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

LaminateIM301510

Xi




IM301522

Xi




IM301512

Xi

Thickness . . . . . . . . . . . . . . 0.07mm Polymer Thickness . . . . . . 0.025mmBacking Material . . . . . . . . 0.009mm Copper Condition. . . . . . . . . . . . . . . Double-sided laminate



Double sided laminate - Copper 0.009mm / Kapton 0.025mm / Copper 0.009mm.

IM301536

Xi




IM301620

Xi

Thickness . . . . . . . . . . . . . . 0.16mm Polymer Thickness . . . . . . 0.025mmBacking Material . . . . . . . . 0.125mm Nomex1



IM301560

Xi




IM301650

Xi

Thickness . . . . . . . . . . . . . . 0.4mm Polymer Thickness . . . . . . 0.025mmBacking material . . . . . . . . 0.38mm Nomex1



Polymer–Polyimide

110


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

SheetIM303110

Xi

Thickness . . . . . . . . . . . . . . 1mm Grade . . . . . . . . . . . . . . . . . Cirlex CL-HN


IM303100

Xi

Thickness . . . . . . . . . . . . . . 1mm Grade . . . . . . . . . . . . . . . . . Upilex


IM303120

Xi



Chopped FiberExtension to break % 30

Limiting Oxygen Index % 38

Shrinkage @180C % <1


IM306560

Xi

Nominal Diameter . . . . . . . 0.014mm Fiber length . . . . . . . . . . . . 60mmGrade . . . . . . . . . . . . . . . . . P84


These fibers are not circular and have a tex value of 0.22tex.

RodIM307910

Xi

Diameter . . . . . . . . . . . . . . . 6.35mm Grade . . . . . . . . . . . . . . . . . Vespel SP1


IM307920

Xi



IM307930

Xi

Diameter . . . . . . . . . . . . . . . 19mm Grade . . . . . . . . . . . . . . . . . Meldin 7001


IM307940

Xi



IM307941

Xi

Diameter . . . . . . . . . . . . . . . 25.4mm Grade . . . . . . . . . . . . . . . . . Meldin 7001


IM307950

Xi

Diameter . . . . . . . . . . . . . . . 38mm Grade . . . . . . . . . . . . . . . . . Meldin 7001


Polymer–Polyimide

111


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

Rod

IM307961

Xi



IM307960

Xi

Diameter . . . . . . . . . . . . . . . 50.8mm Grade . . . . . . . . . . . . . . . . . Meldin 7001


TubeIM307012

Xi



IM307013

Xi



IM307014

Xi



IM307015

Xi



IM307016

Xi



IM307030

Xi



IM307040

Xi



Polymer–Polyimide

112


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyimide

PI

Tube

IM307050

Xi



IM307055

Xi



IM307100

Xi



IM307200

Xi



IM307300

Xi



Thin-walled tube, spirally wound from Kapton1 film.

IM307400

Xi



Thin-walled tube, spirally wound from Kapton1 film.

Polymer–Polyimide

113


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polymethylmethacrylate

PMMA, Acrylic

Common Brand Names : Diakon, Lucite, Oroglas, Perspex, Plexiglas

General Description : Often just called "acrylic" - though this really describes a large family of chemically relatedpolymers - PMMA is an amorphous, transparent and colourless thermoplastic that is hard and stiff but brittle and notch-sensitive. It has good abrasion and UV resistance and excellent optical clarity but poor low temperature, fatigue andsolvent resistances. Though flammable, it has low smoke emission.

General purpose grades can be extruded and injection moulded. Monomer casting (for a description, see Nylon 6) isalso used to achieve much higher molecular weights - which are not melt processable because of their extremely highmelt viscosity - with somewhat improved properties. The monomer cast items most commonly encountered are sheetsand novelty displays in which e.g. insects or watch parts are embedded.

Thin films are normally made from impact modified grades, which incorporate a small proportion of elastomer(s), in orderto improve their flexibility.

Perspex CQ is a particular example of monomer cast sheet which was, until recently, made for intra-ocular use by theoriginal, ca.1940, process because war-time air crew experience had shown that splinters of it that had entered thehuman eye were biolgically inert. They are additive-free and the purest (and probably the highest molecular weight)grade of PMMA available. All of our other PMMA items contain UV absorber.

Applications include sinks, baths, displays, signs, glazing (especially aircraft), lenses and light covers. Cast sheet is alsoused for guards and the like.

Physical Properties Mechanical PropertiesAbbe number 57.2 Elongation at break 2.5-4 %Density 1.19 g cm-3 Hardness - Rockwell M92-100Flammability HB Izod impact strength 16-32 J m-1

Limiting oxygen index 17-20 % Poisson’s ratio 0.35 - 0.4Radiation resistance Fair Tensile modulus 2.4-3.3 GPaRefractive index 1.49 Tensile strength 80 MPaResistance to Ultra-violet GoodWater absorption - over 24 hours 0.2 % Chemical Resistance

Acids - concentrated Good-PoorElectrical Properties Acids - dilute Good-PoorDielectric constant @1MHz 2.6 Alcohols Good-PoorDielectric strength 15 kV mm-1 Alkalis GoodDissipation factor @ 1MHz 0.014 Aromatic hydrocarbons PoorSurface resistivity 1014 Ohm/sq Greases and Oils GoodVolume resistivity 2-14 x 1015 Ohmcm Halogenated Hydrocarbons Poor

Halogens PoorThermal Properties Ketones PoorCoefficient of thermal expansion 70-77 x10-6 K-1

Heat-deflection temperature - 0.45MPa 105 CHeat-deflection temperature - 1.8MPa 95 CLower working temperature -40 CSpecific heat 1400 - 1500 J K-1 kg-1


Upper working temperature 50 to 90 C

FilmPermeability to Oxygen@25C

x10-13 cm3. cm cm-2 s-1 Pa-1 0.1


ME301200

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm Condition. . . . . . . . . . . . . . . Impact modified



SheetME303016

F Xi



ME303005

F Xi



Polymer–Polymethylmethacrylate

114


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PMMA, Acrylic

Sheet

ME303001

F Xi



ME303008

F Xi



ME303007

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm Colour . . . . . . . . . . . . . . . . . Dark red / blackCondition. . . . . . . . . . . . . . . IR transmitting


ME303006

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm


ME303004

F Xi

Thickness . . . . . . . . . . . . . . 0.7mm Grade . . . . . . . . . . . . . . . . . CQ

QuantityWeb Code Size 1pc340-383-451 100 x 100 mm POA855-003-451 200 x 200 mm POA

Clinical grade (CQ) is free from Ultra-violet absorber.

ME303003

F Xi



ME303011

F Xi




ME303010

F Xi

Thickness . . . . . . . . . . . . . . 1.1mm


ME303013

F Xi




ME303021

F Xi




ME303020

F Xi

Thickness . . . . . . . . . . . . . . 2.0mm


ME303026

F Xi





115


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PMMA, Acrylic

Sheet

ME303031

F Xi




ME303032

F Xi

Thickness . . . . . . . . . . . . . . 3.0mm Condition. . . . . . . . . . . . . . . CastCondition. . . . . . . . . . . . . . . Free from UV absorber


ME303030

F Xi

Thickness . . . . . . . . . . . . . . 3.2mm


ME303052

F Xi

Thickness . . . . . . . . . . . . . . 5.0mm Condition. . . . . . . . . . . . . . . CastCondition. . . . . . . . . . . . . . . Free from UV absorber


ME303050

F Xi

Thickness . . . . . . . . . . . . . . 5.0mm


ME303055

F Xi

Thickness . . . . . . . . . . . . . . 6.0mm

QuantityWeb Code Size 1pc 2pcs674-348-793 150 x 150 mm CAD 145.00 CAD 169.00643-739-910 200 x 200 mm CAD 152.00 CAD 185.00

ME303100

F Xi

Thickness . . . . . . . . . . . . . . 10.0mm


ME303250

F Xi

Thickness . . . . . . . . . . . . . . 25.0mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs748-462-459 150 x 150 mm CAD 186.00 CAD 263.00 CAD 494.00 CAD 822.00557-808-586 300 x 300 mm CAD 326.00 CAD 543.00

MonofilamentMaterial 1.0/2.2

Extension to break % <8

Maximum Use temperature C 85

Minimum bending radius mm 90 - >25

Minimum Use temperature C -55

Tensile force N >90

ME305910

F Xi

Diameter . . . . . . . . . . . . . . . 1.0mm Condition. . . . . . . . . . . . . . . Optical fiber


Infolite1 Optical fiber comprising a high purity PMMA core, coated with a fluoropolymer ’skin’ approx 0.015mm thick to maximise internalreflection and coated with a protective jacket of polyethylene giving an overall diameter of 2.2mm.

RodME307901

F Xi

Diameter . . . . . . . . . . . . . . . 1mm



116


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PMMA, Acrylic

Rod

ME307902

F Xi

Diameter . . . . . . . . . . . . . . . 2mm


ME307903

F Xi

Diameter . . . . . . . . . . . . . . . 3mm


ME307905

F Xi

Diameter . . . . . . . . . . . . . . . 5mm


ME307911

F Xi

Diameter . . . . . . . . . . . . . . . 10mm Grade . . . . . . . . . . . . . . . . . CQ

QuantityWeb Code Length 1pc673-937-610 148 mm POA

ME307910

F Xi

Diameter . . . . . . . . . . . . . . . 10mm


ME307915

F Xi


QuantityWeb Code Length 1pc164-378-547 125 mm CAD 263.00144-023-153 189 mm CAD 332.00151-492-792 193 mm CAD 337.00

ME307925

F Xi



ME307920

F Xi

Diameter . . . . . . . . . . . . . . . 20mm


ME307930

F Xi



ME307950

F Xi

Diameter . . . . . . . . . . . . . . . 50mm


ME307980

F Xi

Diameter . . . . . . . . . . . . . . . 100mm


TubeME307050

F Xi

Outside Diameter . . . . . . . . 10mm Wall Thickness . . . . . . . . . . 1.5mmInside Diameter . . . . . . . . . 7mm Condition. . . . . . . . . . . . . . . Extruded


ME307100

F Xi

Outside Diameter . . . . . . . . 13mm Wall Thickness . . . . . . . . . . 1.5mmInside Diameter . . . . . . . . . 10mm Condition. . . . . . . . . . . . . . . Extruded



117


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PMMA, Acrylic

Tube

ME307200

F Xi

Outside Diameter . . . . . . . . 20mm Wall Thickness . . . . . . . . . . 2mmInside Diameter . . . . . . . . . 16mm Condition. . . . . . . . . . . . . . . Extruded


ME307300

F Xi

Outside Diameter . . . . . . . . 30mm Wall Thickness . . . . . . . . . . 3mmInside Diameter . . . . . . . . . 24mm Condition. . . . . . . . . . . . . . . Cast


ME307400

F Xi



ME307410

F Xi

Outside Diameter . . . . . . . . 40mm Wall Thickness . . . . . . . . . . 3mmInside Diameter . . . . . . . . . 34mm Condition. . . . . . . . . . . . . . . Cast


ME307500

F Xi



PowderME306010

F Xi

Mean Particle size . . . . . . . 600micron Condition. . . . . . . . . . . . . . . Additive free polymer


SphereME306810

F Xi

Diameter . . . . . . . . . . . . . . . 1.5mm


ME306820

F Xi

Diameter . . . . . . . . . . . . . . . 3.18mm



118


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polymethylpentene

TPX1

Common Brand Names : TPX1

General Description : A linear isotactic polyolefin more properly called poly 4-methyl pentene-1 which is made byZiegler-Natta type catalysis (see also General Information under Polyethylene - Low Density). Commercially availablegrades are copolymers. It is semi-crystalline, transparent and usually colorless (one common grade is slightly yellow),very light and - for a polyolefin - expensive. [Its density of 0.83g.cm-3 is very close to the theoretical minimum forthermoplastics].

Its properties are reasonably similar to those of other polyolefins, compared to which it is more brittle and more gaspermeable. It has a higher melting point (240C) than most polyolefins and retains form stability up to temperatures closeto this i.e. it softens more slowly with increasing temperature than is normal for thermoplastics. It has good releasecharacteristics and good high frequency electrical and valuable acoustic/ultrasonic properties.

Applications include medical and laboratory apparatus, microwave components and cookware and electroniccomponents.

Physical Properties Mechanical PropertiesDensity 0.835 g cm-3 Elongation at break 15 %Flammability HB Hardness - Rockwell R85Limiting oxygen index 17 % Izod impact strength 49 J m-1

Refractive index 1.463 Tensile modulus 1.5 GPaResistance to Ultra-violet Poor Tensile strength 25.5 MPaWater absorption - over 24 hours 0.01 %

Chemical ResistanceElectrical Properties Acids - concentrated Good-FairDielectric constant @1MHz 2.12 Acids - dilute GoodDissipation factor @ 1kHz 0.0002 Alcohols GoodVolume resistivity >1016 Ohmcm Alkalis Good

Aromatic hydrocarbons Fair-PoorThermal Properties Greases and Oils Good-FairCoefficient of thermal expansion 117 x10-6 K-1 Halogenated Hydrocarbons Fair-PoorHeat-deflection temperature - 0.45MPa 100 C Halogens Fair-PoorHeat-deflection temperature - 1.8MPa 40 C Ketones Good-FairLower working temperature -20 to -40 CSpecific heat 2000 J K-1 kg-1




x10-13 cm3. cm cm-2 s-1 Pa-1 70


x10-13 cm3. cm cm-2 s-1 Pa-1 5


x10-13 cm3. cm cm-2 s-1 Pa-1 20


ME311040

F Xi

Thickness . . . . . . . . . . . . . . 0.04mm


ME311050

F Xi

Thickness . . . . . . . . . . . . . . 0.05mm



ME311070

F Xi

Thickness . . . . . . . . . . . . . . 0.09mm



Disks QuantityWeb Code Diameter 10 Disks 20 Disks 50 Disks805-206-562 4 mm CAD 275.00 CAD 298.00 CAD 365.00650-820-010 8 mm CAD 280.00 CAD 305.00 CAD 375.00352-507-352 10 mm CAD 282.00 CAD 308.00 CAD 380.00063-413-850 12.7 mm CAD 285.00 CAD 313.00 CAD 387.00926-731-312 25 mm CAD 300.00 CAD 333.00 CAD 420.00841-419-524 50 mm CAD 329.00 CAD 374.00 CAD 485.00177-449-578 100 mm CAD 387.00 CAD 457.00 CAD 616.00

Polymer–Polymethylpentene

119


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polymethylpentene

TPX1

Film

ME311100

F Xi

Thickness . . . . . . . . . . . . . . 0.125mm



ME311150

F Xi

Thickness . . . . . . . . . . . . . . 0.25mm



ME311250

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm




SheetME313200

F Xi

Thickness . . . . . . . . . . . . . . 2.0mm Condition. . . . . . . . . . . . . . . Injection moulded


ME313370

F Xi

Thickness . . . . . . . . . . . . . . 4.8mm Condition. . . . . . . . . . . . . . . Compression mouldedCondition. . . . . . . . . . . . . . . Mottled surface


ME313400

F Xi

Thickness . . . . . . . . . . . . . . 6.35mm Condition. . . . . . . . . . . . . . . Extruded


RodME317910

F Xi

Diameter . . . . . . . . . . . . . . . 6.35mm



120


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polymethylpentene

TPX1

Rod

ME317915

F Xi

Diameter . . . . . . . . . . . . . . . 9.5mm


ME317920

F Xi

Diameter . . . . . . . . . . . . . . . 20mm


ME317933

F Xi

Diameter . . . . . . . . . . . . . . . 33mm


ME317950

F Xi

Diameter . . . . . . . . . . . . . . . 50mm


GranuleME316300

F Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . RT18

QuantityWeb Code Weight 1 Pot383-805-181 200 g CAD 148.00975-638-752 500 g CAD 191.00954-843-704 1000 g CAD 238.00

ME316301

F Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . RT18XB


ME316302

F Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . DX820


ME316303

F Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . MX002


ME316304

F Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . MX004


ME316305

F Xi

Nominal Granule Size . . . . 3mm Grade . . . . . . . . . . . . . . . . . DX845



121


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyoxymethylene - Copolymer

Acetal - Copolymer POMC

Common Brand Names : Celcon, Hostaform, Kemetal, Ultraform

General Description : Made in both homopolymer and copolymer forms. Both are hard, tough, stiff polymers withexcellent abrasion resistance and good appearance (can give high surface gloss). Normally highly crystalline andopaque, their natural color is white but they are often used colored. They have poor resistance to U.V. and generally toacids and alkalis. The homopolymer has slightly better mechanical properties but somewhat worse thermo-oxidativestability than the copolymer. Only the copolymer is suitable for continuous use with hot water.

Applications are wide-ranging including gears, bearings, snap fittings and many other engineering components, plumbingfittings, appliance casings and jug kettles.

Physical Properties Mechanical PropertiesDensity 1.41 g cm-3 Elongation at break 15 - 40 %Flammability HB Hardness - Rockwell M80Limiting oxygen index 15 % Izod impact strength 70-80 J m-1

Radiation resistance Poor Poisson’s ratio 0.35Resistance to Ultra-violet Poor Tensile modulus 2.3 - 2.8 GPaWater absorption - equilibrium 0.6 - 0.8 % Tensile strength 60-70 MPaWater absorption - over 24 hours 0.2 - 0.25 %

Chemical ResistanceElectrical Properties Acids - concentrated PoorDielectric constant @1MHz 3.7 - 4.4 Acids - dilute Good-FairDielectric strength 20 @ 2.3mm kV mm-1 Alcohols Good-FairDissipation factor @ 1MHz 0.006 - 0.18 Alkalis GoodSurface resistivity 1015 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 1015 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Good-PoorThermal Properties Halogens PoorCoefficient of thermal expansion 80-120 x10-6 K-1 Ketones Good - FairHeat-deflection temperature - 0.45MPa 160 CHeat-deflection temperature - 1.8MPa 110 CLower working temperature -40 CSpecific heat 1500 J K-1 kg-1



SheetOX303010

F Xi

Thickness . . . . . . . . . . . . . . 1mm


OX303030

F Xi

Thickness . . . . . . . . . . . . . . 3mm


OX303100

F Xi

Thickness . . . . . . . . . . . . . . 10mm


RodOX307905

F Xi



OX307910

F Xi


QuantityWeb Code Length 1pc 2pcs233-090-306 1000 mm CAD 159.00 CAD 196.00

OX307925

F Xi



OX307926

F Xi

Diameter . . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . Red


OX307927

F Xi

Diameter . . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . Green


Polymer–Polyoxymethylene-Copolymer

122


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyoxymethylene - Copolymer

Acetal - Copolymer POMC

Rod

OX307928

F Xi

Diameter . . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . Blue


OX307929

F Xi

Diameter . . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . Yellow


OX307930

F Xi

Diameter . . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . NaturalGrade . . . . . . . . . . . . . . . . . ESD 90


OX307931

F Xi

Diameter . . . . . . . . . . . . . . . 30mm Color . . . . . . . . . . . . . . . . . . BlackGrade . . . . . . . . . . . . . . . . . ESD 60


OX307950

F Xi



OX307980

F Xi



OX307990

F Xi



SphereOX306850

F Xi

Diameter . . . . . . . . . . . . . . . 12.7mm

QuantityWeb Code Spheres 1 Pot046-918-862 10 pcs CAD 286.00747-446-026 20 pcs CAD 445.00

Polymer–Polyoxymethylene-Copolymer

123


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyoxymethylene - Homopolymer

Acetal - Homopolymer POMH

Common Brand Names : Delrin, Tenac

General Description : Made in both homopolymer and copolymer forms. Both are hard, tough, stiff polymers withexcellent abrasion resistance and good appearance (can give high surface gloss). Normally highly crystalline andopaque, their natural color is white but they are often used colored. They have poor resistance to U.V. and generally toacids and alkalis. The homopolymer has slightly better mechanical properties but somewhat worse thermo-oxidativestability than the copolymer. Only the copolymer is suitable for continuous use with hot water.

Applications are wide-ranging including gears, bearings, snap fittings and many other engineering components, plumbingfittings, appliance casings and jug kettles.

Physical Properties Mechanical PropertiesDensity 1.42 g cm-3 Coefficient of friction 0.2 - 0.35Flammability HB Elongation at break 40 - 75 %Limiting oxygen index 15 % Hardness - Rockwell M94Radiation resistance Poor Izod impact strength 75 - 130 J m-1

Resistance to Ultra-violet Poor Poisson’s ratio 0.35Water absorption - equilibrium 0.6 - 0.9 % Tensile modulus 2.9 - 3.1 GPaWater absorption - over 24 hours 0.25 % Tensile strength 70 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 3.7 Acids - concentrated PoorDielectric strength 20 kV mm-1 Acids - dilute Poor - FairDissipation factor @ 1MHz 0.005 Alcohols Good-FairSurface resistivity 1015 Ohm/sq Alkalis PoorVolume resistivity 1015 Ohmcm Aromatic hydrocarbons Good

Greases and Oils GoodThermal Properties Halogenated Hydrocarbons Good-Poor(?)Coefficient of thermal expansion 122 x10-6 K-1 Halogens PoorHeat-deflection temperature - 0.45MPa 170 C Ketones Good - FairHeat-deflection temperature - 1.8MPa 135 CSpecific heat 1500 J K-1 kg-1




x10-13 cm3. cm cm-2 s-1 Pa-1 1.3


x10-13 cm3. cm cm-2 s-1 Pa-1 0.06


OX311050

F Xi

Thickness . . . . . . . . . . . . . . 0.5mm


SheetOX313050

F Xi

Thickness . . . . . . . . . . . . . . 5mm


OX313080

F Xi

Thickness . . . . . . . . . . . . . . 10mm


OX313100

F Xi

Thickness . . . . . . . . . . . . . . 12mm


RodOX317910

F Xi

Diameter . . . . . . . . . . . . . . . 10mm


OX317925

F Xi

Diameter . . . . . . . . . . . . . . . 25mm


Polymer–Polyoxymethylene-Homopolymer

124


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyoxymethylene - Homopolymer

Acetal - Homopolymer POMH

Rod

OX317950

F Xi

Diameter . . . . . . . . . . . . . . . 50mm


OX317980

F Xi

Diameter . . . . . . . . . . . . . . . 100mm


SphereOX316810

F Xi

Diameter . . . . . . . . . . . . . . . 1.59mm


Polyoxymethylene/Acetal Copolymer - 10% Carbon Fiber Reinforced

POMC - 10% CFR

Physical Properties Mechanical PropertiesDensity 1.43 g cm-3 Elongation at break 1.2 %Water absorption - over 24 hours <0.1 % Tensile modulus 8 GPa

Tensile strength 70 MPaElectrical PropertiesSurface resistivity 103 Ohm/sq Chemical ResistanceVolume resistivity 104 Ohmcm Acids - concentrated Poor

Acids - dilute Poor-GoodThermal Properties Alcohols GoodCoefficient of thermal expansion 60 x10-6 K-1 Alkalis Fair-GoodThermal conductivity @^C 0.4 W m-1 K-1 Aromatic hydrocarbons GoodUpper working temperature 100 C Greases and Oils Good

Halogens PoorKetones Good-Fair

GranuleOX336310

F Xi



Polymer–Polyoxymethylene-Homopolymer

125


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyphenyleneoxide

PPO (modified), PPE (modified)

Common Brand Names : Noryl, Vestoran, Luranyl

General Description : Although unmodified PPO is a semi-crystalline thermoplastic, all commercially available gradesare blended with (high impact) polystyrene in order to improve melt processability. A wide range of proportions, togetherwith the use of other modifiers, results in a good range of grades with differing properties tailored to the needs ofindividual end-uses.

These blends are amorphous, opaque, pale grey engineering thermoplastics with a balance of properties (and cost) notunlike nylon but without nylon’s high water absorption and consequent dimensional instability. However they have poorfatigue characteristics and poor solvent, though good hydrolysis, resistance.

Applications include electrical and TV components, washing and dish-washing machine parts, automobile parts(especially fascias) and structural foam.

Physical Properties Mechanical PropertiesDensity 1.06 g cm-3 Abrasive resistance - ASTM D1044 20 mg/1000 cyclesFlammability HB Coefficient of friction 0.35Limiting oxygen index 20 % Elongation at break 50 %Radiation resistance Good Hardness - Rockwell M78/R115Water absorption - over 24 hours 0.1-0.5 % Izod impact strength 200 J m-1

Poisson’s ratio 0.38Electrical Properties Tensile modulus 2.5 GPaDielectric constant @1MHz 2.7 Tensile strength 55-65 MPaDielectric strength 16-20 kV mm-1

Dissipation factor @ 1kHz 0.004 Chemical ResistanceSurface resistivity 2x1016 Ohm/sq Acids - concentrated Good-FairVolume resistivity 1017 Ohmcm Acids - dilute Good

Alcohols GoodThermal Properties Alkalis GoodCoefficient of thermal expansion 60 x10-6 K-1 Aromatic hydrocarbons PoorHeat-deflection temperature - 0.45MPa 137 C Greases and Oils Good-PoorHeat-deflection temperature - 1.8MPa 125 C Halogenated Hydrocarbons Fair-PoorLower working temperature -40 C Halogens PoorThermal conductivity @23C 0.22 W m-1 K-1 Ketones PoorUpper working temperature 80-120 CPPO is modified by the inclusion of High Impact Polystyrene to improve its extrusion properties.

SheetPH303060

F Xi

Thickness . . . . . . . . . . . . . . 6mm Color . . . . . . . . . . . . . . . . . . Pale gray


PH303250

F Xi

Thickness . . . . . . . . . . . . . . 25mm Color . . . . . . . . . . . . . . . . . . Pale gray


RodPH307906

F Xi

Diameter . . . . . . . . . . . . . . . 6mm Color . . . . . . . . . . . . . . . . . . Pale gray


PH307910

F Xi


QuantityWeb Code Length 1pc 2pcs727-207-270 500 mm CAD 184.00 CAD 232.00144-312-493 1000 mm CAD 217.00 CAD 278.00

PH307912

F Xi


QuantityWeb Code Length 1pc 2pcs844-518-885 500 mm CAD 186.00 CAD 234.00068-783-247 1000 mm CAD 219.00 CAD 282.00

PH307930

F Xi



PH307950

F Xi



Polymer–Polyphenyleneoxide

126


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyphenyleneoxide

PPO (modified), PPE (modified)

Rod

PH307980

F Xi



PH307990

F Xi



Polyphenyleneoxide (modified), 30% Glass Fiber Reinforced

PPO 30% GFR

Common Brand Names : Noryl, Vestoran, Luranyl

General Description : The addition of glass fibre reinforcement to PPO gives the usual changes in properties - improvedstrength, heat deflection and upper working temperatures and greatly increased stiffness at the expense of reducedimpact strength and greatly reduced elongation to break.

Physical Properties Mechanical PropertiesDensity 1.29 g cm-3 Abrasive resistance - ASTM D1044 35 mg/1000 cyclesFlammability HB Elongation at break 2-3 %Limiting oxygen index 26 % Hardness - Rockwell L108Water absorption - over 24 hours 0.06-0.33 % Izod impact strength 80 J m-1

Poisson’s ratio 0.27Electrical Properties Tensile modulus 8-9 GPaDielectric constant @1MHz 3.1 Tensile strength 100-120 MPaDielectric strength 15 kV mm-1

Dissipation factor @ 1kHz 0.01 Chemical ResistanceVolume resistivity 1017 Ohmcm Acids - concentrated Good-Fair

Acids - dilute GoodThermal Properties Alcohols GoodCoefficient of thermal expansion 25-30 x10-6 K-1 Alkalis GoodHeat-deflection temperature - 0.45MPa 165 C Aromatic hydrocarbons PoorHeat-deflection temperature - 1.8MPa 135 C Greases and Oils Good-PoorThermal conductivity @23C 0.28 W m-1 K-1 Halogenated Hydrocarbons Fair-PoorUpper working temperature 90-160 C Halogens Poor

Ketones PoorPPO is modified by the inclusion of High Impact Polystyrene to improve its extrusion properties.

SheetPH313250

F Xi

Thickness . . . . . . . . . . . . . . 30mm


RodPH317910

F Xi

Diameter . . . . . . . . . . . . . . . 10mm Color . . . . . . . . . . . . . . . . . . Yellow/Brown


PH317930

F Xi

Diameter . . . . . . . . . . . . . . . 30mm Color . . . . . . . . . . . . . . . . . . Yellow/Brown


Polyphenylenesulfide

PPS

Polymer–Polyphenyleneoxide

127


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyphenylenesulfide

PPS

MonofilamentSU325950

T Xi

Diameter . . . . . . . . . . . . . . . 0.5mm Color . . . . . . . . . . . . . . . . . . Transparent pale amberCondition. . . . . . . . . . . . . . . Unfilled


Polyphenylenesulfide - 40% Glass Fiber Reinforced

PPS - 40% GFR

Common Brand Names : Fortron, Ryton, Supec

General Description : A semi-crystalline, normally dark colored high performance thermoplastic that is commerciallyavailable only in filled or reinforced grades. Reportedly, its low glass-rubber transition temperature leads to unimpressiveproperties for unreinforced grades but the reinforced ones, annealed after moulding, have high crystallinity, particularlygood thermal stability and the properties typical of (reinforced) high performance thermoplastics (see PEEK). It issomewhat less expensive than most high performance thermoplastics, although its long-term continuous usetemperature is somewhat lower than that of PEEK. The 40% glass fiber reinforced grade stocked by Goodfellow has agood balance of strength, stiffness and has good dimensional stability but is rather notch-sensitive.

It is used for precision mechanical parts, electrical components and pumps, valves etc, for use in aggressiveenvironments in process industry.

Physical Properties Mechanical PropertiesDensity 1.66 g cm-3 Elongation at break 1.2 %Flammability V0 Hardness - Rockwell R123Limiting oxygen index 46 % Izod impact strength 75-80 J m-1

Radiation resistance Good Tensile modulus 7.6-12.0 GPaResistance to Ultra-violet Good Tensile strength 124-160 MPaWater absorption - over 24 hours <0.05 %

Chemical ResistanceElectrical Properties Acids - concentrated Good-PoorDielectric constant @1MHz 3.8 - 4.2 Acids - dilute GoodDielectric strength 18 kV mm-1 Alcohols GoodDissipation factor @ 1MHz 0.0013-0.004 Alkalis GoodSurface resistivity 1016 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 1016 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Good-PoorThermal Properties Halogens Good-PoorCoefficient of thermal expansion 22-35 x10-6 K-1 Ketones GoodHeat-deflection temperature - 0.45MPa >260 CHeat-deflection temperature - 1.8MPa 240 CThermal conductivity @23C 0.29-0.45 W m-1 K-1

Upper working temperature 200-260 CThe color of this material may vary significantly between batches.

SheetSU313065

T Xi



RodSU317910

T Xi

Diameter . . . . . . . . . . . . . . . 10mm


SU317915

T Xi

Diameter . . . . . . . . . . . . . . . 12mm


Polymer–Polyphenylenesulfide

128


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyphenylenesulfide - 40% Glass Fiber Reinforced

PPS - 40% GFR

Rod

SU317920

T Xi

Diameter . . . . . . . . . . . . . . . 20mm


SU317927

T Xi

Diameter . . . . . . . . . . . . . . . 27mm


SU317940

T Xi

Diameter . . . . . . . . . . . . . . . 40mm


Polyphenylenesulphide - 20% Carbon Fiber Reinforced

PPS - 20% CFR

Physical Properties Mechanical PropertiesDensity 1.41 g cm-3 Elongation at break 2 %Flammability V-0 Tensile modulus 17 GPaWater absorption - over 24 hours <0.05 % Tensile strength 180 MPa

Electrical Properties Chemical ResistanceSurface resistivity 103 Ohm/sq Acids - concentrated FairVolume resistivity 103 Ohmcm Acids - dilute Good

Alcohols GoodThermal Properties Alkalis GoodCoefficient of thermal expansion 15 x10-6 K-1 Aromatic hydrocarbons GoodHeat-deflection temperature - 1.8MPa 260 C Greases and Oils GoodThermal conductivity @^C 0.47 W m-1 K-1 Halogens FairUpper working temperature 220 C Ketones Good

GranuleSU356310

T Xi



Polymer–Polyphenylenesulfide-40%


129


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyphenylsulfone

PPSu

Common Brand Names : Radel R

General Description: Polyphenylsulfone (PPSu) is an amorphous high performance thermoplastic, offering betterimpact resistance and chemical resistance than polysulfone and polyetherimide. It offers superior hydrolysis resistancewhen compared to other amorphous thermoplastics, as measured by steam autoclaving cycles to failure. In fact PPSuhas virtually unlimited steam sterilizability, outlasting other materials by a factor of 40:1. This factor makes it an excellentchoice for medical devices as steam autoclaves are widely used to sterilize medical devices. It also resists commonacids and bases including commercial washing solutions over a broad temperature range.

Industrial applications include sterilization trays, dental and surgical instrument handles, hot water fittings & aircraft cabininterior components.

Physical Properties Thermal PropertiesDensity 1.29 g cm-3 Coefficient of thermal expansion 55 x10-6 K-1

Flammability V-0 Heat-deflection temperature - 1.8MPa 200 CLimiting oxygen index 44 % Thermal conductivity @^C 0.35 W m-1 K-1

Water absorption 1.2 % Upper working temperature 180-210 CWater absorption - equilibrium 0.6 %Water absorption - over 24 hours 0.35 % Mechanical Properties

Elongation at break 30 %Electrical Properties Hardness - Rockwell M80Dissipation factor @ 1MHz 0.005 Tensile modulus 2.5 GPaSurface resistivity >1013 Ohm/sq Tensile strength 76 MPaVolume resistivity >1014 Ohmcm

SheetSU333020

T Xi

Thickness . . . . . . . . . . . . . . 5.5mm Color . . . . . . . . . . . . . . . . . . Blue


RodSU337912

T Xi



SU337920

T Xi



SU337930

T Xi



SU337940

T Xi



Polymer–Polyphenylsulfone

130


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP

Common Brand Names : Appryl, Hostalen PP, Lacqtene, Novolen, Propathene

General Description : A semi-crystalline, white, semi-opaque commodity thermoplastic made in a very wide variety ofgrades and modifications. It is a linear polyolefin which can be compared in many ways to high density polyethylene(HDPE) and that is manufactured in a very similar way. The catalysts used control the polymer’s stereoregularity quitewell so that commercial polypropylenes are usually predominantly isotactic. Polypropylene homopolymer is harder andhas a higher temperature resistance than HDPE but lower impact resistance and becomes brittle below ~0C. Hencecopolymer grades are preferred for all applications exposed to cold/winter conditions. These copolymers have betterimpact strength, maintained down to lower temperatures, than homopolymer at the expense of quite small reductions inother properties. Like polyethylenes, polypropylene has good chemical but poor UV resistance (unless stabilized orprotected).

Applications include (for homopolymers) appliance housings, housewares, packaging, cassette holders and fibers,monofilaments and slit-film tapes; for copolymers pipes, containers, boat hulls, seat shells and automotive parts e.g.battery cases and bumpers though the latter are often made from more heavily elastomer-modified polypropylenes.

Physical Properties Mechanical PropertiesDensity 0.9 g cm-3 Abrasive resistance - ASTM D1044 13-16 mg/1000 cyclesFlammability HB Coefficient of friction 0.1-0.3Limiting oxygen index 18 % Elongation at break 150-300, for biax film >50 %Radiation resistance Fair Hardness - Rockwell R80-100Refractive index 1.49 Izod impact strength 20-100 J m-1

Resistance to Ultra-violet Poor Tensile modulus 0.9-1.5, for biax film 2.2-4.2, GPaWater absorption - equilibrium 0.03 % Tensile strength 25-40, for biax film 130-300, MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 2.2-2.6 Acids - concentrated Good-FairDielectric strength 30-40 kV mm-1 Acids - dilute Good-FairDissipation factor @ 1MHz 0.0003 - 0.0005 Alcohols GoodSurface resistivity 1013 Ohm/sq Alkalis GoodVolume resistivity 1016-1018 Ohmcm Aromatic hydrocarbons Fair

Greases and Oils Good-FairThermal Properties Halogenated Hydrocarbons Good-PoorCoefficient of thermal expansion 100-180 x10-6 K-1 Halogens PoorHeat-deflection temperature - 0.45MPa 100-105 C Ketones GoodHeat-deflection temperature - 1.8MPa 60-65 CLower working temperature -10 to -60 CSpecific heat 1700 - 1900 J K-1 kg-1




kV mm-1 200






x10-13 cm3. cm cm-2 s-1 Pa-1 6 @ 30C


x10-13 cm3. cm cm-2 s-1 Pa-1 30


x10-13 cm3. cm cm-2 s-1 Pa-1 0.3


x10-13 cm3. cm cm-2 s-1 Pa-1 1.7 @ 30C



PP301040

F Xi




PP301081

F Xi



Polymer–Polypropylene

131


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP

Film

PP301101

F Xi



PP301100

F Xi




PP301120

F Xi




PP301130

F Xi




PP301150

F Xi




PP301300

F Xi

Thickness . . . . . . . . . . . . . . 0.030mm Grade . . . . . . . . . . . . . . . . . Heat sealable




132


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP

Film

PP301320

F Xi




PP301341

F Xi




PP301340

F Xi




PP301350

F Xi




PP301375

F Xi




PP301400

F Xi

Thickness . . . . . . . . . . . . . . 0.1mm Coil width . . . . . . . . . . . . . . 650mmCondition. . . . . . . . . . . . . . . Homopolymer



133


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP

Film

PP301418

F Xi

Thickness . . . . . . . . . . . . . . 0.18mm Condition. . . . . . . . . . . . . . . Copolymer



PP301427

F Xi

Thickness . . . . . . . . . . . . . . 0.27mm Condition. . . . . . . . . . . . . . . Homopolymer



PP301430

F Xi

Thickness . . . . . . . . . . . . . . 0.3mm


PP301440

F Xi




PP301460

F Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs544-632-157 150 x 150 mm CAD 173.00 CAD 199.00 CAD 250.00079-016-472 300 x 300 mm CAD 150.00 CAD 185.00 CAD 217.00877-054-789 600 x 600 mm CAD 148.00 CAD 166.00 CAD 210.00631-838-210 900 x 900 mm CAD 159.00 CAD 181.00


Metallized FilmPP301880

F Xi

Thickness . . . . . . . . . . . . . . 0.008mm Coil width . . . . . . . . . . . . . . 75mmOhms/Square . . . . . . . . . . . 3 Metallized with . . . . . . . . . . AluminumMetallization . . . . . . . . . . . . One side only

Coil Width 75mm QuantityWeb Code Length 1 Reel800-859-228 0.5 m CAD 237.00107-404-510 1 m CAD 258.00425-572-165 2 m CAD 290.00196-513-277 5 m CAD 360.00564-158-980 10 m CAD 452.00519-871-014 20 m CAD 603.00983-881-747 50 m CAD 982.00


134


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP

HoneycombPP302800

F Xi

Thickness . . . . . . . . . . . . . . 10mm Cell size . . . . . . . . . . . . . . . 8mmAdhesive . . . . . . . . . . . . . . . None - cells are fused together Core Density . . . . . . . . . . . 0.08g.cm-3

Cell Wall . . . . . . . . . . . . . . . 0.25mm Facing skin . . . . . . . . . . . . . Non-woven polyester veil


PP302850

F Xi




PP302810

F Xi




PP302851

F Xi




SheetPP303100

F Xi

Thickness . . . . . . . . . . . . . . 1.0mm


PP303150

F Xi

Thickness . . . . . . . . . . . . . . 1.5mm


PP303030

F Xi

Thickness . . . . . . . . . . . . . . 3.0mm


PP303050

F Xi

Thickness . . . . . . . . . . . . . . 4.5mm


PP303055

F Xi

Thickness . . . . . . . . . . . . . . 5.0mm Color . . . . . . . . . . . . . . . . . . NaturalCondition. . . . . . . . . . . . . . . Homopolymer


PP303300

F Xi

Thickness . . . . . . . . . . . . . . 10mm

QuantityWeb Code Size 1pc 2pcs846-212-581 100 x 100 mm CAD 145.00 CAD 161.00875-729-088 150 x 246 mm CAD 164.00070-697-215 300 x 300 mm CAD 186.00

PP303400

F Xi

Thickness . . . . . . . . . . . . . . 25mm



135


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP

MeshPP308706

F Xi

Nominal Aperture . . . . . . . . 34mm Monofil diameter . . . . . . . . 150mmThreads/cm . . . . . . . . . . . . 70 Open area . . . . . . . . . . . . . 4%Weave. . . . . . . . . . . . . . . . . Satin


PP308710

F Xi



FiberPP305747

F Xi

Tex Number . . . . . . . . . . . . 47 Filament Diameter . . . . . . . 0.028mmNumber of Filaments . . . . . 86 Condition. . . . . . . . . . . . . . . Medium Tenacity


RodPP307907

F Xi

Diameter . . . . . . . . . . . . . . . 8mm Condition. . . . . . . . . . . . . . . Homopolymer


PP307908

F Xi

Diameter . . . . . . . . . . . . . . . 8mm Condition. . . . . . . . . . . . . . . Copolymer


PP307910

F Xi



PP307925

F Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs788-896-514 200 mm CAD 150.00 CAD 174.00 CAD 208.00 CAD 273.00612-073-211 500 mm CAD 167.00 CAD 198.00 CAD 285.00509-153-691 1000 mm CAD 186.00 CAD 246.00 CAD 427.00

PP307950

F Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs644-207-814 100 mm CAD 171.00 CAD 207.00 CAD 268.00 CAD 356.00525-984-702 200 mm CAD 187.00 CAD 229.00 CAD 306.00748-087-601 500 mm CAD 218.00 CAD 276.00510-959-321 1000 mm CAD 256.00 CAD 399.00

PP307980

F Xi

Diameter . . . . . . . . . . . . . . . 100mm


PP307990

F Xi

Diameter . . . . . . . . . . . . . . . 150mm



136


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polypropylene

PP


Relative Impact Strength 2.5


GPa 2


GPa 1.3 - hoop


MPa 125

Tensile strength - Transverse MPa 40 - hoop

PP307500

F Xi

Outside Diameter . . . . . . . . 50mm Wall Thickness . . . . . . . . . . 1.1mmColor . . . . . . . . . . . . . . . . . . Gray Inside Diameter . . . . . . . . . 47.8mmCondition. . . . . . . . . . . . . . . Biaxially Oriented tube



GranulePP306320

F Xi

Nominal Granule Size . . . . 3mm Condition. . . . . . . . . . . . . . . Block copolymer


This material has a Melt Flow Rate of 0.4.

PP306315

F Xi

Nominal Granule Size . . . . 4mm Condition. . . . . . . . . . . . . . . Isotactic


SpherePP306820

F Xi

Diameter . . . . . . . . . . . . . . . 3.18mm

QuantityWeb Code Spheres 1 Pot349-445-322 50 pcs CAD 150.00680-662-642 100 pcs CAD 178.00082-833-715 200 pcs CAD 220.00


137


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polystyrene

PS

Common Brand Names : Polystyrol, Styron

General Description : Polystyrene homopolymer, known as "crystal" polystyrene in the trade, is an amorphous,transparent and colorless commodity thermoplastic that is rigid, relatively hard and brittle. It has good electricalproperties, excellent gamma radiation resistance and can be radiation sterilized but has poor chemical and UVresistance. When modified by the incorporation of elastomers, it becomes (high) impact polystyrene or HIPS, which isopaque. Hence there are a large number of polystyrene grades available commercially.

Applications include housewares, containers, packaging, glazing and light diffusers and, for HIPS, casings, cups, take-out containers and cassette cases. Polystyrene is also widely used as structural foam and expanded into beads forpackaging and cushioning.

Physical Properties Mechanical PropertiesAbbe number 30.8 Elongation at break 1.6 %Density 1.05 g cm-3 Hardness - Rockwell M60-90Flammability HB Izod impact strength 19-24 J m-1

Limiting oxygen index 19 % Poisson’s ratio 0.35Radiation resistance Good Tensile modulus 2.3-4.1 GPaRefractive index 1.59-1.60 Tensile strength 30-100 MPaResistance to Ultra-violet PoorWater absorption - over 24 hours <0.4 % Chemical Resistance

Acids - concentrated Fair-PoorElectrical Properties Acids - dilute Good-FairDielectric constant @1MHz 2.4-3.1 Alcohols Good-FairDielectric strength 20 kV mm-1 Alkalis Good-FairDissipation factor @ 1kHz 0.0002 Aromatic hydrocarbons PoorVolume resistivity >1016 Ohmcm Greases and Oils Good-Poor

Halogenated Hydrocarbons PoorThermal Properties Halogens PoorCoefficient of thermal expansion 30-210 x10-6 K-1 Ketones PoorHeat-deflection temperature - 0.45MPa 90 CHeat-deflection temperature - 1.8MPa 80 CSpecific heat 1200 J K-1 kg-1




x10-13 cm3. cm cm-2 s-1 Pa-1 8


x10-13 cm3. cm cm-2 s-1 Pa-1 17 (biax)


x10-13 cm3. cm cm-2 s-1 Pa-1 0.6 (biax)


x10-13 cm3. cm cm-2 s-1 Pa-1 2 (biax)

Permeability to Water @25C x10-13 cm3. cm cm-2 s-1 Pa-1 800 (biax)


ST311025

F Xi



Tolerance on thickness : +/-20%.

ST311030

F Xi




ST311050

F Xi




Polymer–Polystyrene

138


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polystyrene

PS

Film

ST311125

F Xi



ST311250

F Xi




SheetST313120

F Xi

Thickness . . . . . . . . . . . . . . 1.2mm Condition. . . . . . . . . . . . . . . CrystalCondition. . . . . . . . . . . . . . . Transparent Condition. . . . . . . . . . . . . . . Amorphous


ST313200

F Xi


QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs 20pcs074-703-011 100 x 100 mm CAD 138.00 CAD 146.00 CAD 164.00 CAD 190.00 CAD 227.00337-886-057 150 x 150 mm CAD 144.00 CAD 154.00 CAD 177.00 CAD 207.00235-756-868 300 x 300 mm CAD 160.00 CAD 177.00 CAD 213.00 CAD 259.00

ST313300

F Xi



ST313400

F Xi



ST313450

F Xi



PowderST316051

F Xi

Mean Particle size . . . . . . . 250micron Condition. . . . . . . . . . . . . . . Homopolymer

QuantityWeb Code Weight 1 Pot274-300-177 100 g CAD 133.00893-112-482 200 g CAD 158.00251-096-587 500 g CAD 223.00760-740-825 1000 g CAD 322.00069-916-124 2000 g CAD 391.00339-341-706 5000 g CAD 607.00


139


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polystyrene

PS

Powder

ST316090

F Xi

Mean Particle size . . . . . . . 900micron Condition. . . . . . . . . . . . . . . Spherical powderCondition. . . . . . . . . . . . . . . Homopolymer

QuantityWeb Code Weight 1 Pot635-670-307 100 g CAD 136.00281-762-173 200 g CAD 147.00799-513-601 500 g CAD 173.00378-249-254 1000 g CAD 205.00789-893-264 2000 g CAD 260.00380-101-927 5000 g CAD 368.00

GranuleST316310

F Xi

Nominal Granule Size . . . . 3.5mm Melt flow rate . . . . . . . . . . . 2.5


This polymer contains the minimum amount of additives.

Polystyrene - Conductive

High Impact Conductive Polystyrene

General Description : A black High Impact Polystyrene with a carbon filler to give a modest level of electricalconductivity.

Physical Properties Mechanical PropertiesDensity 1.04 g cm-3 Elongation at break 36 %

Izod impact strength no break J m-1

Electrical Properties Tensile modulus 1.6 GPaSurface resistivity 102-107 Ohm/sq Tensile strength 27 MPaVolume resistivity 102-107 Ohmcm

SheetST323100

F Xi

Thickness . . . . . . . . . . . . . . 1.0mm Color . . . . . . . . . . . . . . . . . . BlackCondition. . . . . . . . . . . . . . . Conductive polymer


ST323200

F Xi



ST323300

F Xi




140


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polystyrene - Cross-linked

PS - X - Linked

Common Brand Names : Q.200.5, Rexolite

General Description : A cross-linked polystyrene copolymer which is rigid, transparent and colorless with outstandingelectrical properties, including low dielectric losses up to very high frequencies, and very high radiation resistance. It hasgood dimensional stability, is easily machined and can be polished to a high optical quality. Compared to normalpolystyrene, it is harder and somewhat more temperature resistant.

It is used primarily as a dielectric material in a wide range of components together with lenses, observation windows, X-ray equipment and radiation detectors.

Physical Properties Mechanical PropertiesDensity 1.05 g cm-3 Abrasive resistance - ASTM D1044 60-100 mg/1000 cyclesFlammability HB Elongation at break 3-5 %Radiation resistance Good Hardness - Rockwell R110-120Refractive index 1.59 Tensile modulus 1.65 GPaWater absorption - over 24 hours 0.02-0.03 % Tensile strength 55-70 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 2.5 Acids - concentrated Fair-PoorDielectric strength 27-47 kV mm-1 Acids - dilute Good(-Fair?)Dissipation factor @ 1MHz 0.0002 Alcohols Good(-Fair?)Surface resistivity >1015 Ohm/sq Alkalis Good-FairVolume resistivity >1015 Ohmcm Aromatic hydrocarbons Poor

Greases and Oils Fair-PoorThermal Properties Halogenated Hydrocarbons PoorCoefficient of thermal expansion 70-90 x10-6 K-1 Halogens PoorThermal conductivity @23C 0.17 W m-1 K-1 Ketones PoorUpper working temperature 93 C

SheetST303009

F Xi

Thickness . . . . . . . . . . . . . . 0.9mm


ST303016

F Xi

Thickness . . . . . . . . . . . . . . 1.6mm


ST303032

F Xi

Thickness . . . . . . . . . . . . . . 3.2mm


ST303064

F Xi

Thickness . . . . . . . . . . . . . . 6.4mm


ST303127

F Xi

Thickness . . . . . . . . . . . . . . 12.7mm


ST303150

F Xi

Thickness . . . . . . . . . . . . . . 25.4mm


ST303175

F Xi

Thickness . . . . . . . . . . . . . . 50.8mm


RodST307910

F Xi

Diameter . . . . . . . . . . . . . . . 1.6mm


Polymer–Polystyrene-Cross-linked

141


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polystyrene - Cross-linked

PS - X - Linked

Rod

ST307930

F Xi

Diameter . . . . . . . . . . . . . . . 6.35mm


ST307950

F Xi

Diameter . . . . . . . . . . . . . . . 9.5mm


ST307960

F Xi

Diameter . . . . . . . . . . . . . . . 12.7mm


ST307965

F Xi

Diameter . . . . . . . . . . . . . . . 19mm


ST307970

F Xi

Diameter . . . . . . . . . . . . . . . 25mm


ST307980

F Xi

Diameter . . . . . . . . . . . . . . . 38mm


ST307990

F Xi

Diameter . . . . . . . . . . . . . . . 50mm


ST307995

F Xi

Diameter . . . . . . . . . . . . . . . 70mm


ST307997

F Xi

Diameter . . . . . . . . . . . . . . . 89mm


Polymer–Polystyrene-Cross-linked

142


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polysulphone

PSu

Common Brand Names : Udel1, Ultrason1 SPhysical Properties Heat-deflection temperature - 1.8MPa 174 CDensity 1.24 g cm-3 Thermal conductivity @^C 0.26 W m-1 K-1

Flammability HB Upper working temperature 150-180 CLimiting oxygen index 30 %Radiation resistance Good Mechanical PropertiesResistance to Ultra-violet Poor Elongation at break 50-100 %Water absorption 0.40 % Hardness - Rockwell M91Water absorption - equilibrium 0.85 % Izod impact strength 69 J m-1

Tensile modulus 2.48 GPaElectrical Properties Tensile strength 70 MPaDielectric constant @1MHz 3.10Dielectric constant @1kHz 3.14 Chemical ResistanceDielectric strength 17 kV mm-1 Acids - concentrated FairDissipation factor @ 1MHz 0.0050 Acids - dilute GoodDissipation factor @ 1kHz 0.0013 Alcohols GoodVolume resistivity 5x1016 Ohmcm Alkalis Good

Aromatic hydrocarbons FairThermal Properties Greases and Oils GoodCoefficient of thermal expansion 56 x10-6 K-1 Halogens Good

Ketones Poor

FilmSU341025

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm



SU341100

T Xi

Thickness . . . . . . . . . . . . . . 0.1mm



SU341450

T Xi

Thickness . . . . . . . . . . . . . . 0.9mm


RodSU347910

T Xi



SU347925

T Xi



SU347950

T Xi



Polymer–Polysulphone

143


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polysulphone

PSu

GranuleSU346320

T Xi



Polytetrafluoroethylene

PTFE

Common Brand Names : Fluon, Hostaflon TF, Teflon TFE

General Description : A totally fluorinated polymer that is very frequently called Teflon1. This can cause confusion asDuPont also use this brand name for a family of related fluoropolymers. It is semi-crystalline, semi-opaque and white. Ithas outstanding chemical resistance being unaffected by almost all chemicals and also has a very high oxygen index (i.e.is inherently non-flam). It has a very low coefficient of friction and is stable to high temperatures. It is soft, easilydeformed, very prone to creep and low in strength with poor radiation resistance. It is expensive and cannot be melt-processed (although in theory it melts at 327C, its melt viscosity is virtually infinite) and so is formed by powder sinteringmethods.

Industrial applications include bearings, seals, O-rings, high temperature electrical insulation, non-stick coatings andlinings for vessels etc, etc. Its unusual properties make it invaluable for a wide range of laboratory applications.

Physical Properties Mechanical PropertiesDensity 2.2 g cm-3 Coefficient of friction 0.05-0.2Flammability V0 Elongation at break 400 %Limiting oxygen index 95 % Hardness - Rockwell D50-55 - ShoreRadiation resistance Poor Izod impact strength 160 J m-1

Refractive index 1.38 Poisson’s ratio 0.46Resistance to Ultra-violet Excellent Tensile modulus 0.3-0.8 GPaWater absorption - over 24 hours 0.01 % Tensile strength 10-40 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 2.0-2.1 Acids - concentrated GoodDielectric strength 50-170 kV mm-1 Acids - dilute GoodDissipation factor @ 1MHz 0.0003 - 0.0007 Alcohols GoodSurface resistivity 1017 Ohm/sq Alkalis GoodVolume resistivity 1018-1019 Ohmcm Aromatic hydrocarbons Good

Greases and Oils GoodThermal Properties Halogenated Hydrocarbons GoodCoefficient of thermal expansion 100-160 x10-6 K-1 Halogens GoodHeat-deflection temperature - 0.45MPa 120 C Ketones GoodHeat-deflection temperature - 1.8MPa 54 CLower working temperature -260 CSpecific heat 1000 J K-1 kg-1




kV mm-1 160

Dissipation Factor @1MHz <0.0001



x10-13 cm3. cm cm-2 s-1 Pa-1 7


x10-13 cm3. cm cm-2 s-1 Pa-1 7


x10-13 cm3. cm cm-2 s-1 Pa-1 1


x10-13 cm3. cm cm-2 s-1 Pa-1 3

Permeability to Water @25C x10-13 cm3. cm cm-2 s-1 Pa-1 25?

FP301050

T Xi


Coil Width 450mm QuantityWeb Code Length 1 Reel409-640-585 0.1 m CAD 352.00205-062-720 0.2 m CAD 402.00632-840-363 0.5 m CAD 503.00105-039-970 1 m CAD 618.00129-992-799 2 m CAD 815.00

Polymer–Polysulphone

144


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Film

FP301100

T Xi

Thickness . . . . . . . . . . . . . . 0.01mm



FP301020

T Xi

Thickness . . . . . . . . . . . . . . 0.0125mm Porosity . . . . . . . . . . . . . . . . 98%Pore Size . . . . . . . . . . . . . . 12.5mm Condition. . . . . . . . . . . . . . . Porous Membrane


FP301040

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm Porosity . . . . . . . . . . . . . . . . 91%Pore Size . . . . . . . . . . . . . . 5mm Condition. . . . . . . . . . . . . . . Porous Membrane


FP301200

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm



FP301250

T Xi

Thickness . . . . . . . . . . . . . . 0.05mm



Tolerance on thickness : +20%/-10%.

FP301220

T Xi

Thickness . . . . . . . . . . . . . . 0.063mm Porosity . . . . . . . . . . . . . . . . 91%Pore Size . . . . . . . . . . . . . . 1mm Condition. . . . . . . . . . . . . . . Porous Membrane


FP301265

T Xi

Thickness . . . . . . . . . . . . . . 0.063mm Porosity . . . . . . . . . . . . . . . . 84%Pore Size . . . . . . . . . . . . . . 0.45mm Condition. . . . . . . . . . . . . . . Porous Membrane


FP301300

T Xi

Thickness . . . . . . . . . . . . . . 0.1mm



Polymer–Polytetrafluoroethylene

145


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Film

FP301301

T Xi



FP301305

T Xi

Thickness . . . . . . . . . . . . . . 0.15mm



FP301312

T Xi

Thickness . . . . . . . . . . . . . . 0.175mm Porosity . . . . . . . . . . . . . . . . 35%Pore Size . . . . . . . . . . . . . . 5.0mm Condition. . . . . . . . . . . . . . . Porous MembraneBacking support . . . . . . . . . 0.15mm thick Webril1 Polypropy-

lene non-woven fabric.


This material is backed with 0.15mm thick Webril1 Polypropylene non-woven fabric. The apparent porosity of this material should becompared with the un-backed material. The thickness shown includes the backing.

FP301340

T Xi

Thickness . . . . . . . . . . . . . . 0.20mm



FP301310

T Xi

Thickness . . . . . . . . . . . . . . 0.21mm Porosity . . . . . . . . . . . . . . . . 51.5%Pore Size . . . . . . . . . . . . . . 1.0mm Condition. . . . . . . . . . . . . . . Porous MembraneBacking support . . . . . . . . . 0.15mm thick Webril1 Polypropy-

lene non-woven fabric.


This material is backed with 0.15mm thick Webril1 Polypropylene non-woven fabric. The apparent porosity of this material should becompared with the un-backed material. The thickness shown includes the backing.

FP301326

T Xi

Thickness . . . . . . . . . . . . . . 0.225mm Porosity . . . . . . . . . . . . . . . . 35%Pore Size . . . . . . . . . . . . . . 5.0mm Condition. . . . . . . . . . . . . . . Porous MembraneBacking support . . . . . . . . . Reemay1 non-woven 0.2mm thick

Polyester.


This material is backed with Reemay1 non-woven 0.2mm thick Polyester. The apparent porosity of this material should be comparedwith the un-backed material. The thickness shown includes the backing.

FP301350

T Xi

Thickness . . . . . . . . . . . . . . 0.25mm



FP301324

T Xi

Thickness . . . . . . . . . . . . . . 0.263mm Porosity . . . . . . . . . . . . . . . . 51.5%Pore Size . . . . . . . . . . . . . . 1.0mm Condition. . . . . . . . . . . . . . . Porous MembraneBacking support . . . . . . . . . Reemay1 non-woven 0.2mm thick

Polyester.


This material is backed with Reemay1 non-woven 0.2mm thick Polyester. The apparent porosity of this material should be comparedwith the un-backed material. The thickness shown includes the backing.


146


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Film

FP301375

T Xi

Thickness . . . . . . . . . . . . . . 0.30mm



FP301400

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm



SheetFP303050

T Xi

Thickness . . . . . . . . . . . . . . 1.0mm


FP303100

T Xi

Thickness . . . . . . . . . . . . . . 2.0mm


FP303150

T Xi

Thickness . . . . . . . . . . . . . . 3.0mm


FP303200

T Xi

Thickness . . . . . . . . . . . . . . 5.0mm


FP303250

T Xi

Thickness . . . . . . . . . . . . . . 10.0mm


FiberFP305722

T Xi

Tex Number . . . . . . . . . . . . 22 Filament Diameter . . . . . . . 0.0211mmNumber of Filaments . . . . . 30 Color . . . . . . . . . . . . . . . . . . Brown



147


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Fiber

FP305744

T Xi

Tex Number . . . . . . . . . . . . 44 Filament Diameter . . . . . . . 0.0211mmNumber of Filaments . . . . . 60 Color . . . . . . . . . . . . . . . . . . Brown


RodFP307901

T Xi

Diameter . . . . . . . . . . . . . . . 1.0mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs664-569-287 500 mm CAD 134.00 CAD 151.00 CAD 188.00 CAD 237.00 CAD 301.00896-023-421 1000 mm CAD 146.00 CAD 168.00 CAD 215.00 CAD 275.00

FP307905

T Xi

Diameter . . . . . . . . . . . . . . . 2.0mm


FP307908

T Xi

Diameter . . . . . . . . . . . . . . . 2.5mm


FP307910

T Xi

Diameter . . . . . . . . . . . . . . . 3.0mm


FP307920

T Xi

Diameter . . . . . . . . . . . . . . . 4.0mm


FP307925

T Xi

Diameter . . . . . . . . . . . . . . . 5.0mm


FP307950

T Xi

Diameter . . . . . . . . . . . . . . . 8.0mm


FP307975

T Xi

Diameter . . . . . . . . . . . . . . . 10.0mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs461-320-289 200 mm CAD 184.00 CAD 207.00 CAD 261.00 CAD 339.00 CAD 445.00665-028-290 500 mm CAD 202.00 CAD 231.00 CAD 300.00 CAD 394.00 CAD 554.00128-531-772 1000 mm CAD 221.00 CAD 259.00 CAD 344.00 CAD 488.00

FP307977

T Xi

Diameter . . . . . . . . . . . . . . . 13mm


FP307979

T Xi

Diameter . . . . . . . . . . . . . . . 20mm



148


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Rod

FP307980

T Xi

Diameter . . . . . . . . . . . . . . . 25.0mm


FP307985

T Xi

Diameter . . . . . . . . . . . . . . . 50.0mm


FP307990

T Xi

Diameter . . . . . . . . . . . . . . . 100mm


TubeFP307003

T Xi


LengthWeb Code335-287-862910-986-033873-259-593157-444-947454-094-396

FP307004

T Xi


LengthWeb Code680-616-855077-111-740638-963-941870-497-505812-199-991

FP307006

T Xi


LengthWeb Code624-571-944071-495-515936-940-563117-569-765696-223-752

FP307007

T Xi


LengthWeb Code495-900-070651-529-199234-578-211051-788-544121-666-462687-649-119

FP307010

T Xi


LengthWeb Code884-777-671597-209-807651-232-433404-050-478


149


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Tube

FP307012

T Xi


LengthWeb Code978-968-638371-077-839384-731-396091-420-736427-594-896449-356-120

FP307018

T Xi

Outside Diameter . . . . . . . . 1.82mm Wall Thickness . . . . . . . . . . 0.41mmInside Diameter . . . . . . . . . 1mm

LengthWeb Code169-518-009189-761-682720-202-035025-250-371156-289-012

FP307024

T Xi


LengthWeb Code235-005-491375-683-794960-467-460058-432-804304-101-322

FP307022

T Xi

Outside Diameter . . . . . . . . 2.5mm Wall Thickness . . . . . . . . . . 0.1mmInside Diameter . . . . . . . . . 2.3mm Heat-shrinkable tubing . . . 0.65mm minimum I/D

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs166-459-892 200 mm CAD 148.00 CAD 166.00 CAD 202.00 CAD 246.00 CAD 307.00465-779-646 500 mm CAD 170.00 CAD 197.00 CAD 251.00 CAD 315.00 CAD 498.00902-511-428 1000 mm CAD 195.00 CAD 231.00 CAD 305.00 CAD 487.00

FP307027

T Xi


LengthWeb Code582-994-855874-358-501294-818-792852-340-460542-559-667819-959-783

FP307032

T Xi



FP307035

T Xi



FP307030

T Xi



FP307048

T Xi



FP307050

T Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs432-865-318 500 mm CAD 164.00 CAD 183.00 CAD 224.00 CAD 274.00 CAD 343.00699-181-372 1000 mm CAD 181.00 CAD 207.00 CAD 261.00 CAD 327.00 CAD 493.00


150


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

Tube

FP307065

T Xi


LengthWeb Code479-064-447240-596-063401-263-954568-321-160

FP307064

T Xi


QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs908-677-961 500 mm CAD 170.00 CAD 190.00 CAD 232.00 CAD 284.00 CAD 355.00584-743-340 1000 mm CAD 187.00 CAD 214.00 CAD 269.00 CAD 337.00 CAD 505.00

FP307066

T Xi



FP307080

T Xi



FP307076

T Xi


QuantityWeb Code Length 1pc 2pcs296-274-666 230 mm CAD 181.00 CAD 206.00

FP307068

T Xi

Outside Diameter . . . . . . . . 8.2mm Wall Thickness . . . . . . . . . . 0.1mmInside Diameter . . . . . . . . . 8mm Heat-shrinkable tubing . . . 1.6mm minimum I/D

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs085-478-021 200 mm CAD 158.00 CAD 179.00 CAD 223.00 CAD 276.00684-757-183 500 mm CAD 185.00 CAD 218.00594-643-897 1000 mm CAD 216.00 CAD 261.00

FP307090

T Xi



FP307140

T Xi

Outside Diameter . . . . . . . . 14mm Wall Thickness . . . . . . . . . . 1mmInside Diameter . . . . . . . . . 12mm

LengthWeb Code296-886-658636-937-711466-125-609532-760-693186-184-202

FP307131

T Xi

Outside Diameter . . . . . . . . 14mm Wall Thickness . . . . . . . . . . 0.07mmInside Diameter . . . . . . . . . 13.86mm Heat-shrinkable tubing . . . 3.7mm minimum I/D


FP307205

T Xi

Outside Diameter . . . . . . . . 19.2mm Wall Thickness . . . . . . . . . . 0.1mmInside Diameter . . . . . . . . . 19mm Heat-shrinkable tubing . . . 5.7mm minimum I/D



151


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PTFE

PowderFP306010

T Xi

Mean Particle size . . . . . . . 6-9micron


FP306020

T Xi



SphereFP306810

T Xi

Diameter . . . . . . . . . . . . . . . 1.59mm


FP306820

T Xi

Diameter . . . . . . . . . . . . . . . 3.18mm


Polytetrafluoroethylene coated Glass Fabric

PTFE 75 / Glass 25

General Description : Fabrics woven from continuous filament glass yarns and coated with PTFE to give a stiff, flexible,fairly smooth surfaced material that is chemically inert with excellent release properties.

Industrial applications include release material, protective curtains and conveyor belts eg in food processing machines.

Physical Properties Chemical ResistanceDensity 2.08 g cm-3 Acids - concentrated Poor

Acids - dilute GoodElectrical Properties Alcohols GoodSurface resistivity >1013 Ohm/sq Alkalis Good-FairVolume resistivity >1015 Ohmcm Aromatic hydrocarbons Good

Greases and Oils GoodThermal Properties Halogenated Hydrocarbons GoodLower working temperature -190 to -60 C Halogens FairUpper working temperature 260 C Ketones Good

FabricFP313510

T Xi


Weave. . . . . . . . . . . . . . . . . Plain Thickness . . . . . . . . . . . . . . 0.08mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs646-729-591 300 x 300 mm CAD 173.00 CAD 199.00 CAD 254.00 CAD 322.00841-188-999 500 x 500 mm CAD 209.00 CAD 249.00 CAD 333.00 CAD 469.00148-615-837 500 x 1000 mm CAD 245.00 CAD 300.00 CAD 450.00 CAD 784.00


Plain weave: Warp (longitudinal) yarns (ends) pass over and under alternate weft (transverse) yarns (picks) and vice-versa.


152


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polytetrafluoroethylene coated Glass Fabric

PTFE 75 / Glass 25

Fabric

FP313520

T Xi


Weave. . . . . . . . . . . . . . . . . Plain Thickness . . . . . . . . . . . . . . 0.15mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs486-924-588 300 x 300 mm CAD 199.00 CAD 235.00 CAD 310.00 CAD 402.00865-573-719 500 x 500 mm CAD 251.00 CAD 308.00 CAD 479.00 CAD 840.00196-722-417 500 x 1000 mm CAD 304.00 CAD 399.00 CAD 821.00 CAD 1526.00


Polytetrafluoroethylene filled with Glass

PTFE 25% GF

Common Brand Names : Fluon, Hostaflon, Teflon

General Description : Filling PTFE with glass makes it stiffer and somewhat harder but lowers its tensile strength andimpact resistance. It also improves the creep resistance, dimensional stability and wear.

Applications include wear pads, piston rings and rotating platforms in microwave ovens.

Physical Properties Mechanical PropertiesDensity 2.25 g cm-3 Coefficient of friction 0.08-0.10Flammability V0 Elongation at break 100-300 %Limiting oxygen index 95 % Hardness - Rockwell D60-70 - ShoreResistance to Ultra-violet Good Izod impact strength 144 J m-1

Water absorption - over 24 hours 0.15 % Tensile modulus 1.7 GPaTensile strength 7-20 MPa

Electrical PropertiesDielectric constant @1MHz 2.2-2.35 Chemical ResistanceDielectric strength 40 kV mm-1 Acids - concentrated PoorDissipation factor @ 1kHz 0.003 Acids - dilute GoodSurface resistivity 1015 Ohm/sq Alcohols GoodVolume resistivity 1016 Ohmcm Alkalis Good-Fair

Aromatic hydrocarbons GoodThermal Properties Greases and Oils GoodCoefficient of thermal expansion 75-100 x10-6 K-1 Halogenated Hydrocarbons GoodThermal conductivity @23C 0.33-0.42 W m-1 K-1 Halogens GoodUpper working temperature 260 C Ketones Good

FilmFP321300

T Xi

Thickness . . . . . . . . . . . . . . 0.30mm


FP321400

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm


SheetFP323075

T Xi

Thickness . . . . . . . . . . . . . . 1.5mm


FP323150

T Xi

Thickness . . . . . . . . . . . . . . 3.0mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs244-153-211 150 x 150 mm CAD 195.00 CAD 236.00 CAD 319.00 CAD 419.00519-154-055 300 x 300 mm CAD 286.00 CAD 364.00 CAD 666.00894-251-211 1000 x 1000 mm CAD 1324.00

Polymer–PolytetrafluoroethylenecoatedGlassFabric

153


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polytetrafluoroethylene filled with Glass

PTFE 25% GF

Sheet

FP323200

T Xi

Thickness . . . . . . . . . . . . . . 5.0mm

QuantityWeb Code Size 1pc 2pcs 5pcs 10pcs781-404-937 150 x 150 mm CAD 226.00 CAD 280.00 CAD 389.00 CAD 630.00675-624-773 300 x 300 mm CAD 348.00 CAD 505.00 CAD 1111.00453-095-843 600 x 600 mm CAD 900.00

FP323250

T Xi

Thickness . . . . . . . . . . . . . . 10.0mm


RodFP327930

T Xi

Diameter . . . . . . . . . . . . . . . 5.0mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs 20pcs181-668-441 100 mm CAD 150.00 CAD 168.00 CAD 208.00 CAD 263.00 CAD 339.00708-562-200 200 mm CAD 162.00 CAD 185.00 CAD 235.00 CAD 301.00570-286-200 500 mm CAD 186.00 CAD 218.00 CAD 287.00 CAD 375.00285-775-711 1000 mm CAD 212.00 CAD 255.00 CAD 347.00

FP327950

T Xi

Diameter . . . . . . . . . . . . . . . 10.0mm


FP327960

T Xi

Diameter . . . . . . . . . . . . . . . 15.0mm


FP327970

T Xi

Diameter . . . . . . . . . . . . . . . 25.0mm

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs719-431-507 50 mm CAD 183.00 CAD 214.00 CAD 282.00 CAD 367.00210-497-581 100 mm CAD 208.00 CAD 250.00 CAD 338.00 CAD 476.00312-199-053 200 mm CAD 244.00 CAD 301.00 CAD 447.00024-884-849 500 mm CAD 316.00 CAD 430.00110-602-110 1000 mm CAD 424.00

Polymer–PolytetrafluoroethylenefilledwithGlass

154


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyvinylchloride - Unplasticized

UPVC

Common Brand Names : Corvic, Evipol, Geon, Hostalit, Lacovyl, Lucorex

General Description : An amorphous commodity thermoplastic that can be transparent and colorless but is much morecommonly pigmented. It is stiff, strong and inherently flame retardant with quite good chemical resistance (solvents areits weak area, especially stress cracking therein). It has good barrier properties and UV resistance but a limitedoperational temperature range, becoming brittle at 5C (unless modified) and with an upper continuous use temperature of50C.

As additive-free PVC starts to decompose before it melts, it can only be melt processed by the addition of stabilisers orthe use of copolymers (or by the addition of plasticisers which results in products of different properties).

Applications include building products - eg window frames and cladding, pipes and fittings, floor tiles - bottles, film and LPrecords. Though PVC is widely used as cable insulation, this is normally made from plasticized grades (or sometimesfrom cross-linked PVC for minimum flammability).

Physical Properties Mechanical PropertiesDensity 1.4 g cm-3 Elongation at break 60 %Flammability V0 Hardness - Rockwell R106-120Limiting oxygen index 42 % Izod impact strength 20-1000 J m-1

Radiation resistance Fair Tensile modulus 2.5-4.0 GPaRefractive index 1.54 Tensile strength 25-70 MPaResistance to Ultra-violet GoodWater absorption - over 24 hours 0.03-0.4 % Chemical Resistance

Acids - concentrated Good-PoorElectrical Properties Acids - dilute GoodDielectric constant @1MHz 2.7-3.1 Alcohols GoodDielectric strength 14 kV mm-1 Alkalis GoodDissipation factor @ 1kHz 0.025 Aromatic hydrocarbons PoorVolume resistivity 1016 Ohmcm Greases and Oils Good

Halogenated Hydrocarbons Fair-PoorThermal Properties Halogens FairCoefficient of thermal expansion 75-100 x10-6 K-1 Ketones PoorHeat-deflection temperature - 0.45MPa 70 CHeat-deflection temperature - 1.8MPa 67 CLower working temperature -30 CSpecific heat 1000-1500 J K-1 kg-1




x10-13 cm3. cm cm-2 s-1 Pa-1 0.1


x10-13 cm3. cm cm-2 s-1 Pa-1 1.5


x10-13 cm3. cm cm-2 s-1 Pa-1 0.01


x10-13 cm3. cm cm-2 s-1 Pa-1 0.04



CV311200

T Xi

Thickness . . . . . . . . . . . . . . 0.2mm Color . . . . . . . . . . . . . . . . . . ClearCondition. . . . . . . . . . . . . . . Copolymer




Polymer–Polyvinylchloride-Unplasticized

155


Telephone +44 1480 424 800 : Fax +44 1480 424 900



UPVC

Film

CV311450

T Xi

Thickness . . . . . . . . . . . . . . 0.38mm Color . . . . . . . . . . . . . . . . . . ClearCondition. . . . . . . . . . . . . . . Copolymer




SheetPermeability to CarbonDioxide @25C

x10-13 cm3. cm cm-2 s-1 Pa-1 0.12


x10-13 cm3. cm cm-2 s-1 Pa-1 1.3


x10-13 cm3. cm cm-2 s-1 Pa-1 0.009


x10-13 cm3. cm cm-2 s-1 Pa-1 0.034


The color of this material may vary significantly between batches.

CV313005

T Xi



CV313010

T Xi

Thickness . . . . . . . . . . . . . . 1mm Color . . . . . . . . . . . . . . . . . . Clear


CV313045

T Xi

Thickness . . . . . . . . . . . . . . 4.5mm Color . . . . . . . . . . . . . . . . . . Clear


CV313250

T Xi

Thickness . . . . . . . . . . . . . . 10.0mm Color . . . . . . . . . . . . . . . . . . Gray


RodThe color of this material may vary significantly between batches.

CV317906

T Xi

Diameter . . . . . . . . . . . . . . . 6mm Color . . . . . . . . . . . . . . . . . . Gray


CV317910

T Xi



CV317925

T Xi




156


Telephone +44 1480 424 800 : Fax +44 1480 424 900



UPVC


Relative Impact Strength 2


GPa 3


GPa 3 - Hoop


MPa 75

Tensile strength - Transverse MPa 75 - Hoop


CV317480

T Xi

Outside Diameter . . . . . . . . 48mm Wall Thickness . . . . . . . . . . 3mmColor . . . . . . . . . . . . . . . . . . Gray Inside Diameter . . . . . . . . . 42mmCondition. . . . . . . . . . . . . . . Biaxially Oriented tube

QuantityWeb Code Length 1pc 2pcs 5pcs 10pcs604-092-788 100 mm CAD 197.00 CAD 233.00 CAD 313.00 CAD 406.00511-595-515 200 mm CAD 224.00 CAD 271.00 CAD 374.00949-443-255 500 mm CAD 278.00 CAD 348.00 CAD 666.00680-403-340 1000 mm CAD 339.00 CAD 540.00

PowderCV316010

T Xi



Polyvinylfluoride

PVF

Common Brand Names : Tedlar

A semi-crystalline, colourless, transparent-translucent fluoropolymer with excellent weathering resistance, good chemicalresistance and low permeability to gases; it is very slow burning and has a very high tolerance of flexing. It is UVtransparent, down to say 250nm for the thinner films. However, it is very expensive and unsuitable for injection mouldingbecause its melt decomposition rate is too fast.

Normally only available as film which is used for exterior glazing, release film and surface protection eg flammabilityreduction of aircraft interiors.

Physical Properties Heat-deflection temperature - 0.45MPa 120 CDensity 1.37-1.39 g cm-3 Heat-deflection temperature - 1.8MPa 80 CFlammability V0 Lower working temperature -70 CLimiting oxygen index 35 % Specific heat 1000 - 1800 J K-1 kg-1

Refractive index 1.46 Upper working temperature 150 - 200 CResistance to Ultra-violet ExcellentWater absorption - over 24 hours 0.05 % Mechanical Properties

Elongation at break 90-250 %Electrical Properties Hardness - Rockwell D80 - ShoreDielectric constant @1kHz 8 Izod impact strength 180 J m-1

Dielectric strength 20 kV mm-1 Poisson’s ratio 0.4Dissipation factor @ 1kHz 0.04 Tear strength 130-200 (initial) N mm-1

Volume resistivity 1013 Ohmcm Tensile modulus 2.1 - 2.6 GPaTensile strength 55-110 MPa

Thermal PropertiesCoefficient of thermal expansion 50-97 x10-6 K-1


157


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyvinylfluoride

PVF


x10-13 cm3. cm cm-2 s-1 Pa-1 0.07


x10-13 cm3. cm cm-2 s-1 Pa-1 0.3


x10-13 cm3. cm cm-2 s-1 Pa-1 0.001


x10-13 cm3. cm cm-2 s-1 Pa-1 0.015


FV331013

T Xi

Thickness . . . . . . . . . . . . . . 0.013mm Coil width . . . . . . . . . . . . . . 300mmCondition. . . . . . . . . . . . . . . Modified to reduce flammability Color . . . . . . . . . . . . . . . . . . White


FV331025

T Xi



FV331050

T Xi

Thickness . . . . . . . . . . . . . . 0.05mm



Polyvinylidenechloride

PVDC

Common Brand Names : Saran

General Description : A transparent and almost colorless thermoplastic noted for its extremely low permeability togases. As the homopolymer begins to decompose at or marginally above its melting point (200C), all commerciallyavailable grades are copolymers (with vinyl chloride, acrylates or nitriles) and stabilisers are also normally necessary.

Its applications are predominantly packaging and barrier films, often as the barrier layer in multi-layer structures.

Physical Properties Mechanical PropertiesDensity 1.63 g cm-3 Coefficient of friction 0.24Limiting oxygen index 60 % Hardness - Rockwell R98-106Radiation resistance Fair Izod impact strength 16-53 J m-1

Resistance to Ultra-violet Poor Tensile modulus 0.3-0.55 GPaWater absorption - over 24 hours 0.1 % Tensile strength 25-110 MPa

Electrical Properties Chemical ResistanceDielectric constant @1MHz 3.0-6.0 Acids - concentrated Good-FairSurface resistivity 1012-1013 Ohm/sq Acids - dilute GoodVolume resistivity 1012-1016 Ohmcm Alcohols Good

Alkalis GoodThermal Properties Aromatic hydrocarbons FairCoefficient of thermal expansion 190 x10-6 K-1 Greases and Oils GoodThermal conductivity @23C 0.13 W m-1 K-1 Ketones FairUpper working temperature 80-100 C

Polymer–Polyvinylfluoride

158


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyvinylidenechloride

PVDC


kV mm-1 160-280

Dissipation Factor @1MHz 0.05-0.08




x10-13 cm3. cm cm-2 s-1 Pa-1 0.02


x10-13 cm3. cm cm-2 s-1 Pa-1 0.001


x10-13 cm3. cm cm-2 s-1 Pa-1 0.004



CV301150

T Xi


Coil Width 300mm QuantityWeb Code Length 1 Reel469-966-993 0.5 m CAD 137.00745-868-970 1 m CAD 146.00233-618-928 2 m CAD 161.00202-368-349 5 m CAD 195.00296-044-384 10 m CAD 240.00005-539-245 20 m CAD 318.00692-412-158 50 m CAD 519.00

CV301230

T Xi

Thickness . . . . . . . . . . . . . . 0.033mm



CV301245

T Xi

Thickness . . . . . . . . . . . . . . 0.043mm Coil width . . . . . . . . . . . . . . 134mmCondition. . . . . . . . . . . . . . . Double wound (2 x 0.0215mm)


PowderCV306010

T Xi

Mean Particle size . . . . . . . <180micron


Polymer–Polyvinylidenechloride

159


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polyvinylidenefluoride

PVDF

Common Brand Names : Floraflon, Kynar, Solef

General Description : A semi-crystalline, semi-opaque and white engineering thermoplastic that is melt processable andexpensive. It has good temperature and general chemical resistance (though neither are as good as PTFE’s) and goodabrasion and radiation resistance. It is somewhat stiffer and stronger than most (melt-processable) fluoropolymers buthas high dielectric losses.

It has a highly dipolar molecule so that, if the correct morphology is achieved, valuable piezo- and pyro-electric propertiesresult. The desired form is known as the ß phase or Form I, in which the predominantly "head to tail" polymer chainshave an all-trans extended planar zig-zag form with the dipoles of adjacent chains parallel to one another. This is formedfrom the more common Alpha phase (Form II) by mechanical deformation followed by electrical polarization at very highelectrical fields. In practice, both uniaxial and biaxial mechanical orientation is used which, after poling, gives a differentbalance of piezo-/pyro-electric properties.

Applications of PVDF include pipes and fittings, bearings, linings and vessels (all especially for the chemical processingindustry), wire insulation and piezo-electric devices.

Physical Properties Mechanical PropertiesDensity 1.76 g cm-3 Abrasive resistance - ASTM D1044 24 mg/1000 cyclesFlammability V0 Coefficient of friction 0.2-0.4Limiting oxygen index 44 % Elongation at break 50 %Radiation resistance Fair Hardness - Rockwell R77-83Refractive index 1.42 Izod impact strength 120-320 J m-1

Resistance to Ultra-violet Excellent Poisson’s ratio 0.34Water absorption - over 24 hours 0.04 % Tensile modulus 1.0-3.0 GPa

Tensile strength 25-60 MPaElectrical PropertiesDielectric constant @1MHz 8.4 Chemical ResistanceDielectric strength 13 kV mm-1 Acids - concentrated GoodDissipation factor @ 1kHz 0.06 Acids - dilute GoodSurface resistivity 1013 Ohm/sq Alcohols GoodVolume resistivity 1014 Ohmcm Alkalis Fair

Aromatic hydrocarbons GoodThermal Properties Greases and Oils GoodCoefficient of thermal expansion 80-140 x10-6 K-1 Halogenated Hydrocarbons Good-FairHeat-deflection temperature - 0.45MPa 120-150 C Halogens Good-PoorHeat-deflection temperature - 1.8MPa 80-115 CLower working temperature -40 CThermal conductivity @23C 0.1-0.25 W m-1 K-1


Polymer–Polyvinylidenefluoride

160


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PVDF

FilmMaterial Uni-axial Bi-axial Unoriented

Dielectric Constant @ 1MHz 12 @ 1KHz 11 @ 1KHz


kV mm-1 ~160

Dissipation Factor @1MHz 0.018 @ 1KHz


% 14-20 50


% 300-450 50



x10-13 cm3. cm cm-2 s-1 Pa-1 0.2


x10-13 cm3. cm cm-2 s-1 Pa-1 0.25


x10-13 cm3. cm cm-2 s-1 Pa-1 0.25


x10-13 cm3. cm cm-2 s-1 Pa-1 0.03


x10-13 cm3. cm cm-2 s-1 Pa-1 0.03


Piezo coefficient - d31 pC.N-1 18-20 8

Piezo coefficient - d32 pC.N-1 2 8

Piezo coefficient - d33 pC.N-1 ~-20 15-16

Piezo coefficient - d3h pC.N-1 -6.5

Piezo coefficient - g31 Vm.N-1 0.15

Piezo coefficient - g32 Vm.N-1 0.015

Piezo coefficient - g33 Vm.N-1 ~-0.15 ~0.18

Pyro coefficient - 3 mC m-2 K-1 -27 ~25

Shrinkage % 2.5-25 2


GPa 1.8-2.7 2


GPa 1.7-2.7 2


MPa 180-290 180

Tensile strength - Transverse MPa 29-38 180

Volume Resistivity Ohmcm 1.8x1015 5x1014

FV301050

T Xi




FV301090

T Xi

Thickness . . . . . . . . . . . . . . 0.009mm Oriented . . . . . . . . . . . . . . . Uni-axially orientedCondition. . . . . . . . . . . . . . . Piezo-electric film


FV301251

T Xi

Thickness . . . . . . . . . . . . . . 0.028mm Oriented . . . . . . . . . . . . . . . Uni-axially orientedCondition. . . . . . . . . . . . . . . Piezo-electric film



FV301260

T Xi

Thickness . . . . . . . . . . . . . . 0.05mm




161


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PVDF

Film

FV301300

T Xi

Thickness . . . . . . . . . . . . . . 0.1mm



FV301310

T Xi

Thickness . . . . . . . . . . . . . . 0.125mm



FV301350

T Xi

Thickness . . . . . . . . . . . . . . 0.25mm

QuantityWeb Code Size 1pc 2pcs 5pcs689-664-878 145 x 145 mm CAD 179.00 CAD 204.00 CAD 255.00608-212-435 290 x 290 mm CAD 231.00 CAD 276.00 CAD 395.00


FV301360

T Xi

Thickness . . . . . . . . . . . . . . 0.3mm


FV301400

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm

QuantityWeb Code Size 1pc 2pcs 5pcs138-221-744 100 x 100 mm CAD 213.00 CAD 258.00 CAD 359.00277-715-542 150 x 150 mm CAD 251.00 CAD 312.00 CAD 444.00714-441-340 300 x 300 mm CAD 365.00 CAD 473.00305-166-671 600 x 600 mm CAD 618.00

FV301490

T Xi

Thickness . . . . . . . . . . . . . . 1.0mm


Metallized FilmFV301926

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm Ohms/Square . . . . . . . . . . . 2Condition. . . . . . . . . . . . . . . Biaxially Oriented Condition. . . . . . . . . . . . . . . Piezo-electric film


Metallized on both sides with Aluminum.

FV301940

T Xi

Thickness . . . . . . . . . . . . . . 0.04mm Ohms/Square . . . . . . . . . . . 2Condition. . . . . . . . . . . . . . . Biaxially Oriented Condition. . . . . . . . . . . . . . . Piezo-electric film



FV301960

T Xi

Thickness . . . . . . . . . . . . . . 0.11mm Ohms/Square . . . . . . . . . . . 2Oriented . . . . . . . . . . . . . . . Uni-axially oriented Condition. . . . . . . . . . . . . . . Piezo-electric film




162


Telephone +44 1480 424 800 : Fax +44 1480 424 900



PVDF

SheetFV303200

T Xi

Thickness . . . . . . . . . . . . . . 2.0mm

QuantityWeb Code Size 1pc 2pcs 5pcs130-285-219 150 x 150 mm CAD 193.00 CAD 244.00 CAD 384.00285-655-908 500 x 500 mm CAD 512.00

RodFV307910

T Xi

Diameter . . . . . . . . . . . . . . . 3.0mm


FV307925

T Xi

Diameter . . . . . . . . . . . . . . . 10.0mm


FV307940

T Xi

Diameter . . . . . . . . . . . . . . . 20.0mm


TubeFV307201

T Xi

Outside Diameter . . . . . . . . 20mm Wall Thickness . . . . . . . . . . 0.2mmInside Diameter . . . . . . . . . 19.6mm Heat-shrinkable tubing . . . 9.5mm minimum I/D


GranuleFV306300

T Xi

Nominal Granule Size . . . . 5mm Condition. . . . . . . . . . . . . . . Additive free polymer


Silicone Elastomer

MQ/VNQ/PMQ/PVMQ

Common Brand Names : Silastic, Silopren

General Description : Relatively expensive synthetic elastomers which are used in a range of formulations tailored tothe needs of individual end-uses. Their natural color is off-white/yellowish but formulations often include opaque, coloredfillers. Although relatively weak at ambient temperatures, their retention of properties and overall performance at bothhigher and lower temperatures is very good - and can, to some extent, be moved in either direction by formulation. Theyhave very good chemical and UV resistance but can be prone to (slow) hydrolysis in high pressure steam and in theabsence of oxygen at high temperatures. They are also very permeable to gases.

Industrial applications include seals, O-rings etc., linings, insulation, modelling/casting moulds or impressions, permeablemembranes and automobile and aerospace applications.

Physical Properties Chemical ResistanceDensity 1.1 - 1.5 g cm-3 Acids - concentrated Good-PoorRadiation resistance Poor Acids - dilute Good-Poor

Alcohols Good-FairThermal Properties Alkalis Good-FairLower working temperature -70 to -50 C Aromatic hydrocarbons PoorSpecific heat 1300 - 1500 J K-1 kg-1 Greases and Oils Good-PoorUpper working temperature 200-260 C Halogenated Hydrocarbons Poor

Halogens PoorMechanical Properties Ketones PoorHardness - Rockwell 60 degrees Shore A


163


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Silicone Elastomer

MQ/VNQ/PMQ/PVMQ

Tensile strength 6.5 MPa


x10-13 cm3. cm cm-2 s-1 Pa-1 2500


x10-13 cm3. cm cm-2 s-1 Pa-1 400


x10-13 cm3. cm cm-2 s-1 Pa-1 200

Permeability to Oxygen @0C x10-13 cm3. cm cm-2 s-1 Pa-1 400


SI301025

Xi

Thickness . . . . . . . . . . . . . . 0.025mm


Surrounded by thicker 3mm wide border.

SI301050

Xi

Thickness . . . . . . . . . . . . . . 0.05mm


SI301126

Xi

Thickness . . . . . . . . . . . . . . 0.125mm


SheetSI303045

Xi

Thickness . . . . . . . . . . . . . . 0.45mm


SI303060

Xi

Thickness . . . . . . . . . . . . . . 0.6mm


SI303100

Xi

Thickness . . . . . . . . . . . . . . 1.0mm


SI303201

Xi

Thickness . . . . . . . . . . . . . . 2.0mm Specification . . . . . . . . . . . . USP Class VI


SI303300

Xi

Thickness . . . . . . . . . . . . . . 3.0mm


RodSI307910

Xi

Diameter . . . . . . . . . . . . . . . 1.0mm Color . . . . . . . . . . . . . . . . . . WhiteCondition. . . . . . . . . . . . . . . Flexible cord

LengthWeb Code489-326-460376-042-022833-643-308766-472-793556-721-286

Polymer–SiliconeElastomer

164


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Silicone Elastomer

MQ/VNQ/PMQ/PVMQ

Rod

SI307920

Xi


LengthWeb Code286-875-392471-495-221436-384-641491-200-409794-216-327

SI307930

Xi


LengthWeb Code351-283-798863-847-957467-979-020681-940-082464-834-761

SI307937

Xi


LengthWeb Code570-662-175420-247-541220-209-161121-552-061337-625-622

SI307950

Xi


LengthWeb Code419-464-199482-359-673334-352-773126-371-222368-182-087

TubeSI307160

Xi


LengthWeb Code887-228-615465-993-737099-077-687065-093-369823-538-873

SI307300

Xi


LengthWeb Code387-603-180450-389-658298-711-199338-893-159361-641-890

SI307370

Xi


LengthWeb Code695-539-075357-068-544835-239-220666-794-081

SI307450

Xi


LengthWeb Code205-230-020653-761-538720-193-462024-177-454022-178-663


165


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Silicone Elastomer

MQ/VNQ/PMQ/PVMQ

Tube

SI307061

Xi


LengthWeb Code667-194-035398-846-196292-900-468015-707-556422-918-399

SI307060

Xi


LengthWeb Code748-855-529

SI307062

Xi


LengthWeb Code175-161-341699-890-674921-581-958224-710-392570-001-147

TPE - 50% Leather Fibre Filled

TPE - 50% Leather Fibre Filled

Physical Properties Mechanical PropertiesDensity 1.02-1.05 g cm-3 Elongation at break 5-120 %Water absorption - equilibrium 1-3 % Hardness - Rockwell 40-80 Shore A

Tensile strength 1-10 MPa

FilmET381250 Thickness . . . . . . . . . . . . . . 1.2mm Color . . . . . . . . . . . . . . . . . . Black



LumpET386100 Max. Lump size . . . . . . . . . 5mm Color . . . . . . . . . . . . . . . . . . Black



166


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Tetrafluoroethylene-perfluoro(alkoxy vinyl ether) - Copolymer

PFA. Teflon PFA.

Physical Properties Heat-deflection temperature - 0.45MPa 63-80 CDensity 2.15 g cm-3 Heat-deflection temperature - 1.8MPa 48-50 CFlammability V0 Thermal conductivity @^C 0.19 W m-1 K-1

Limiting oxygen index >95% % Upper working temperature 260 CRefractive index 1.35Water absorption <0.03 % Mechanical Properties

Elongation at break 300 %Electrical Properties Tensile strength 25 MPaDielectric constant @1MHz 2.05-2.06Dielectric constant @1kHz 2.05-2.06 Chemical ResistanceDissipation factor @ 1MHz 0.0008 Acids - concentrated ExcellentDissipation factor @ 1kHz 0.0001-0.0002 Acids - dilute Excellent

Alcohols ExcellentThermal Properties Alkalis ExcellentCoefficient of thermal expansion 76-78 x10-6 K-1 Aromatic hydrocarbons Excellent

Greases and Oils ExcellentHalogens ExcellentKetones Excellent


x10-13 cm3. cm cm-2 s-1 Pa-1 10


x10-13 cm3. cm cm-2 s-1 Pa-1 1


x10-13 cm3. cm cm-2 s-1 Pa-1 3


FV321025

T Xi

Thickness . . . . . . . . . . . . . . 0.025mm



FV321050

T Xi

Thickness . . . . . . . . . . . . . . 0.052mm



FV321100

T Xi

Thickness . . . . . . . . . . . . . . 0.1mm



FV321200

T Xi

Thickness . . . . . . . . . . . . . . 0.5mm



SheetFV323100

T Xi

Thickness . . . . . . . . . . . . . . 1mm


Polymer–Tetrafluoroethylene-perfluoro(alkoxyvinylether)-Copolymer

167


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Tetrafluoroethylene-perfluoro(alkoxy vinyl ether) - Copolymer

PFA. Teflon PFA.

Sheet

FV323300

T Xi

Thickness . . . . . . . . . . . . . . 3mm


RodFV327905

T Xi

Diameter . . . . . . . . . . . . . . . 3mm

QuantityWeb Code Length 1pc 2pcs 5pcs709-580-104 300 mm CAD 155.00 CAD 200.00 CAD 352.00086-835-119 600 mm CAD 197.00 CAD 285.00831-965-023 900 mm CAD 230.00 CAD 400.00

FV327910

T Xi

Diameter . . . . . . . . . . . . . . . 9.5mm


FV327930

T Xi

Diameter . . . . . . . . . . . . . . . 25mm


Vectra A1 - 15% Glass Fiber Reinforced

Liquid Crystal Polyester - 15% GFR

Physical Properties Mechanical PropertiesDensity 1.50 g cm-3 Compressive modulus 10 GPaFlammability V-0 Compressive strength 85 MPaRadiation resistance Good Elongation at break 3.1 %Resistance to Ultra-violet Good Hardness - Rockwell M80

Tensile modulus 12 GPaElectrical Properties Tensile strength 200 MPaDielectric constant @1MHz 3.0Dielectric strength 34 kV mm-1 Chemical ResistanceDissipation factor @ 1MHz 0.018 Acids - concentrated FairSurface resistivity 1013 Ohm/sq Acids - dilute GoodVolume resistivity >1015 Ohmcm Alcohols Good

Alkalis FairThermal Properties Aromatic hydrocarbons GoodCoefficient of thermal expansion 5-18 x10-6 K-1 Greases and Oils GoodHeat-deflection temperature - 1.8MPa 230 C Ketones GoodThermal conductivity @^C 3.0-3.3 W m-1 K-1


RodBEWARE OF MACHINING Please read the General Description under Technical Data, especially the third paragraph, for an explanationof possible machining problems. We cannot accept complaints or returns resulting from any attempt to machine this material, includingany arising from any attempt to machine this material including any arising from cracking or delamination in the material as supplied.

ES387920

Xi




Vectra A1 - 25% GFR

Polymer–Tetrafluoroethylene-perfluoro(alkoxyvinylether)-Copolymer

168


Telephone +44 1480 424 800 : Fax +44 1480 424 900



Vectra A1 - 25% GFR

RodET377940

T Xi

Diameter . . . . . . . . . . . . . . . 20mm Color . . . . . . . . . . . . . . . . . . BlackCondition. . . . . . . . . . . . . . . Contains PTFE as a dry lubricant



Vectra A1 - 30% GFR

Physical Properties Thermal PropertiesDensity 1.62 g cm-3 Coefficient of thermal expansion 3-10 x10-6 K-1

Flammability UL94 V-0 Heat-deflection temperature - 0.45MPa 250 CLimiting oxygen index 45 % Heat-deflection temperature - 1.8MPa 235 CRadiation resistance Good Upper working temperature 200-220 CResistance to Ultra-violet GoodWater absorption - equilibrium 0.04 % Mechanical PropertiesWater absorption - over 24 hours 0.005 % Elongation at break 1.1 %

Hardness - Rockwell M93Electrical Properties Tensile modulus 22 GPaDielectric constant @1MHz 4.1 Tensile strength 160 MPaDissipation factor @ 1MHz 0.018Surface resistivity >1015 Ohm/sq Chemical ResistanceVolume resistivity 1013 Ohmcm Acids - dilute Good

Alcohols GoodAlkalis FairAromatic hydrocarbons GoodGreases and Oils GoodKetones Good

RodET367925

Xi



Polymer–VectraA1-25%


169


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Vectra A1 - Liquid Crystal Polyester

Vectra A1

Common Brand Names : Vectra A, Xydar

General Description : These are remarkable materials - not only are they high performance thermoplastics with the properties normallyassociated with that group, they also have very distinctive additional properties resulting from their liquid crystalline nature. They have stifflinear molecules which readily organise themselves spatially into zones with the three dimensional order typical of solid crystals. Ingeneral, this occurs both in solution and in the melt and it is strongly promoted by shear or flow resulting in a high degree of orientation inthe flow direction. In the case of these melt-processable or thermotropic (strict meaning : forms liquid crystal regions in the melt)polyesters, it is in the melt that this property is of practical importance, but in the case of Kevlar, which decomposes below its "meltingpoint", liquid crystals are formed in solution and are used to achieve its high degree of orientation and resultant properties.

One main consequence of this morphology is that the structure and properties of the material are highly anisotropic. The morpholgy iscrudely similar to that of a fiber reinforced polymer but where the reinforcement is oriented molecules of the matrix material; they are oftencalled self-reinforcing polymers (SRP) as a result. Design approaches based on the use of fiber reinforced polymers (FRP) can beapplied, up to a point, to SRP’s; it should also be noted that, in contrast to normal FRP’s, the addition of fibers to SRP’s (glass and carbonfilled grades are relatively widely used) reduces rather than increases the degree of anisotropy. The morphology of SRP’s can also can becompared to that of wood and the idea of grain direction can be useful in thinking about its nature.

The mechanical properties of Vectras are extremely high in the direction of flow/molecular orientation and correspondingly low in the otherdimensions. Therefore, the properties of a melt-processed article depend very markedly on the details of the melt flow during itsmanufacture. The outer layers of an extruded or injection moulded item will normally be uniformly and highly oriented parallel to thesurface; in the core, at least of straightforward injection mouldings, "tumbling" of the melt usually occurs leading to molecular orientationroughly perpendicular to the general flow direction. One consequence of this is that the common practice of machining prototype articlesbefore making an injection moulding tool can lead to highly misleading results - the classic example is that of a flanged bobbin which, ifmachined from rod with its axis parallel to that of the rod, will have extremely weak flanges but when injection moulded will have strong,stiff flanges. Furthermore, the highly fibrillar nature of the outer layers of semi-fabricated items leads to other problems if they aremachined eg fibrillation, tear-out, poor surface finish and potential dimensional tolerance difficulties. These two types of problem lead to aclear recommendation against machining from the polymer manufacturer and we ourselves have to disclaim liability for the results of anyattempted machining; however, this leaves would-be prototypers in a nasty "no-win" situation to which we suspect that, short of making a"cheap" injection moulding tool, there is as yet no satisfactory solution. We therefore hope that these observations will help those of ourend-users who see no option but to machine to do so on a basis of informed understanding.

With the exception of their very high impact strength which will be discussed in more detail later in this paragraph, published mechanicalproperties are broadly similar to those of glass fiber reinforced engineering polymers, but it follows from the previous paragraph that theseproperties depend to a much greater extent than usual on the details of the test specimen so they must be used with even more thannormal caution. This is even more true of measurement of impact strength, particularly notched where results are dominated by whether/how the notch penetrates the highly oriented surface layers and it seems likely that conventional test results tend to underestimate impactstrength. Nevertheless, it is clear even from these values that SRP’s have very high impact strengths (not that much less thanpolycarbonate’s) and very much greater than those of conventional fiber reinforced engineering polymers whose strength and moduliSRP’s broadly match. Furthermore, a high proportion of this toughness is retained down to liquid nitrogen temperatures at least.

Vectra has good creep and fatigue properties but its wear characteristics, particularly for unfilled grades, are adversely affected by surfacefibrillation. Its barrier properties are excellent (at least comparable to those of PVDC) and its radiation, UV and chemical and hydrolysisresistances are very good. It is insoluble in at least almost all solvents (and so very difficult to characterise scientifically) but attacked tosome extent by strong acids and somewhat more by bases; however, even for bases a combination of elevated temperatures/longexposure times/quite high concentrations are needed before significant loss of properties occurs. Yet another of its remarkable propertiesis its low, though highly anisotropic, coefficient of thermal expansion (CTE) - to the extent that the CTE parallel to the flow direction has a(low) negative value. [This rare characteristic is shared by the highly oriented fibers - carbon, Kevlar and ultra high modulus polyethylene].In practice, the CTE can be varied within limits by selecting grade and moulding conditions and components produced that match the CTEof glass, ceramic, some metals and glass fiber/epoxy laminates; this is used eg for surface mounted electronic components.

There are other consequences of SRP’s morphology that favour injection moulding namely : low melt viscosity (once sheared), favouringlong and complex melt flow paths; very low warpage and shrinkage, favouring production of high precision parts; very low heat of fusion,favouring fast cycle times. However, internal welds lines tend to be quite weak and it is most important that these are considered verycarefully during design.

Applications appear to be in the fairly early stages of development but include mechanical and electronic components that require injectionmoulding to very close tolerances eg complex electronic connectors.

Colour : Its natural colour is an opaque brownish-yellow but it often coloured black.

Physical Properties Mechanical PropertiesDensity 1.40 g cm-3 Abrasive resistance - ASTM D1044 56 mg/1000 cyclesFlammability V0 @ 0.8mm Coefficient of friction 0.12-0.14Limiting oxygen index 35 % Compressive strength 70 MPaRadiation resistance Good Elongation at break 3 %Resistance to Ultra-violet Good Hardness - Rockwell M60Water absorption - equilibrium 0.03 % Izod impact strength 520 J m-1

Water absorption - over 24 hours 0.02 % Tensile modulus 2-10 GPaTensile strength 55-165 MPa

Electrical PropertiesDielectric constant @1MHz 3.0 Chemical ResistanceDielectric strength 47 @ 1.5mm kV mm-1 Acids - concentrated Good-PoorDissipation factor @ 1MHz 0.02 Acids - dilute GoodSurface resistivity 4x1013 Ohm/sq Alcohols GoodVolume resistivity 1016 Ohmcm Alkalis Good-Fair

Aromatic hydrocarbons GoodThermal Properties Greases and Oils GoodCoefficient of thermal expansion -5 to +75 x10-6 K-1 Halogenated Hydrocarbons Good(?)Heat-deflection temperature - 0.45MPa 220 C Halogens GoodHeat-deflection temperature - 1.8MPa 180 C Ketones GoodLower working temperature ~ -200 CSpecific heat 1000 J K-1 kg-1


Upper working temperature 200-220 CThe color of this material may vary significantly between batches.

Polymer–VectraA1-Liquid

CrystalPolyester

170


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Vectra A1 - Liquid Crystal Polyester

Vectra A1

FiberMaterial Vectran HS


x10-6 K-1 -ve.

Density g cm-3 1.4

Extension to break % 3.3

Modulus GPa 65


Shrinkage @100C % =<0.5


ES315717

Xi


QuantityWeb Code Length 1 Reel050-226-618 10 m CAD 143.00278-335-204 20 m CAD 170.00791-912-435 50 m CAD 243.00989-057-649 100 m CAD 353.00632-207-667 200 m CAD 515.00025-959-448 500 m CAD 970.00


ES317920

Xi

Diameter . . . . . . . . . . . . . . . 18mm Made from . . . . . . . . . . . . . Liquid Crystal polymer


ES317930

Xi



Vectra B1 - 30% Glass Fiber Reinforced


Physical Properties Mechanical PropertiesDensity 1.60 g cm-3 Compressive modulus 21.5 GPaFlammability V-0 Compressive strength 150 MPaLimiting oxygen index 50 % Elongation at break 1.0 %Radiation resistance Good Hardness - Rockwell M100Resistance to Ultra-violet Good Tensile modulus 22 GPaWater absorption - equilibrium 0.08 % Tensile strength 205 MPaWater absorption - over 24 hours 0.009 %

Chemical ResistanceElectrical Properties Acids - concentrated FairDielectric constant @1MHz 3.5 Acids - dilute GoodDielectric strength 38 kV mm-1 Alcohols GoodDissipation factor @ 1MHz 0.008 Alkalis FairSurface resistivity >1015 Ohm/sq Aromatic hydrocarbons GoodVolume resistivity 1013 Ohmcm Greases and Oils Good

Ketones GoodThermal PropertiesCoefficient of thermal expansion 3-13 x10-6 K-1

Heat-deflection temperature - 1.8MPa 235 CSpecific heat 1626 J K-1 kg-1


SheetES393100

Xi

Thickness . . . . . . . . . . . . . . 10mm Color . . . . . . . . . . . . . . . . . . BlackCondition. . . . . . . . . . . . . . . Centre-gated Condition. . . . . . . . . . . . . . . Machining feedstock


Polymer–VectraA1-Liquid

CrystalPolyester

171


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Vectra B1 - 30% Glass Fiber Reinforced



ES397920

Xi

Diameter . . . . . . . . . . . . . . . 10.7mm


ES397930

Xi

Diameter . . . . . . . . . . . . . . . 13.7mm


Vectra B1 - Liquid Crystal Polyester/amide copolymer

Vectra B1

Common Brand Names : Vectra B

General Description : See Vectra A.

Physical Properties Mechanical PropertiesDensity 1.40 g cm-3 Compressive strength 84 MPaFlammability V0 @ 0.4mm Elongation at break 1.3 %Limiting oxygen index 50 % Hardness - Rockwell M100Radiation resistance Good Izod impact strength 415 J m-1

Resistance to Ultra-violet Good Tensile modulus 2.5-20 GPaWater absorption - equilibrium 0.1 % Tensile strength 87-188 MPaWater absorption - over 24 hours 0.03 %

Chemical ResistanceElectrical Properties Acids - concentrated Good-PoorDielectric constant @1MHz 3.1 Acids - dilute GoodDielectric strength 37 @ 1.5mm kV mm-1 Alcohols GoodDissipation factor @ 1MHz 0.01 Alkalis FairVolume resistivity 1016 Ohmcm Aromatic hydrocarbons Good

Greases and Oils GoodThermal Properties Ketones GoodCoefficient of thermal expansion -5 to +40 x10-6 K-1

Heat-deflection temperature - 1.8MPa 200 CSpecific heat 1000 J K-1 kg-1



ES327903

Xi



This rod is very fibrillar and the circumference is rough.

ES327905

Xi



This rod is fibrillar and rough with a variable diameter. If any doubt about the suitability of this material, please ask our TechnicalDepartment before ordering.

ES327910

Xi

Diameter . . . . . . . . . . . . . . . 10.5mm Made from . . . . . . . . . . . . . Liquid Crystal polymer


Polymer–VectraB1-30%


172


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Vectra B1 - Liquid Crystal Polyester/amide copolymer

Vectra B1

Rod

ES327920

Xi



ES327930

Xi



Vectra MT1300 - Liquid Crystalline Polyester

Vectra MT1300

RodET397910

Xi

Diameter . . . . . . . . . . . . . . . 10mm Color . . . . . . . . . . . . . . . . . . BlackCondition. . . . . . . . . . . . . . . Unfilled


Polymer–VectraB1-Liquid

CrystalPolyester/amidecopolymer

173


Telephone +44 1480 424 800 : Fax +44 1480 424 900


AAcrylonitrile/Methylacrylate copolymer (Barex1 - impact

modified copolymer) 18Akulon K and F 33

Akulon S 40, 44

Alkathene 82

Appryl 131Aridall 30

Arnite 94

BBarex 18

Broadleaf 30

CCapron 33Carlona 82

Celanex 57, 59

Celazole 56

Celcon 122Cellidor B 22

Cellophane 18

Cellulose (Regenerated Cellulose) 18

Cellulose Acetate (CA) 20Cellulose Acetate Butyrate (CAB) 22

Chopped Fiber

.. Polyaramid 55

.. Polyimide 111

Clarifoil 20

Corvic 155

Cyclo-olefin copolymer (Topas1) 23Cycolac 31

DDacron 94

Delrin 124

Dexel 20Diakon 114

EEthylene-Chlorotrifluoroethylene copolymer (E-CTFE) 24

Ethylene-Tetrafluoroethylene Copolymer (ETFE) 25

Evipol 155

FFabric.. Polyaramid 49

.. Polyethylene - U.H.M.W. 89

.. Polyethylene terephthalate 101

.. Polytetrafluoroethylene coated Glass Fabric 152Fiber

.. Cellulose 20

.. Polyamide - Nylon 4, 6 32


.. Polyaramid 50, 55

.. Polyetheretherketone 69

.. Polyethylene - Low Density 85



.. Polypropylene 136

.. Polytetrafluoroethylene 147

.. Vectra A1 - Liquid Crystal Polyester 171

Film

.. Cellulose 19

.. Cellulose Acetate 20

.. Ethylene-Chlorotrifluoroethylene copolymer 24

.. Ethylene-Tetrafluoroethylene Copolymer 25

.. Fluorinated Ethylene Propylene Copolymer 27

.. Poly L lactic acid - Biopolymer 30


.. Polyamide - Nylon 6 34



.. Polyaramid 52

.. Polybutylene terephthalate 57

.. Polycarbonate 60

.. Polycarbonate - Conductive 65


.. Polyetherimide 73

.. Polyethersulfone 76

.. Polyethylene - Carbon filled 78

.. Polyethylene - High density 79



.. Polyethylene naphthalate 91


.. Polyhydroxybutyrate/Polyhydroxyvalerate 8% - Biopo-lymer 105

.. Polyimide 107

.. Polymethylmethacrylate 114

.. Polymethylpentene 119

.. Polyoxymethylene - Homopolymer 124


.. Polystyrene 138

.. Polysulphone 143


.. Polytetrafluoroethylene filled with Glass 153

.. Polyvinylchloride - Unplasticized 155

.. Polyvinylfluoride 158

.. Polyvinylidenechloride 159

.. Polyvinylidenefluoride 161

.. Silicone Elastomer 164

.. Tetrafluoroethylene-perfluoro(alkoxy vinyl ether) - Co-

polymer 167

.. TPE - 50% Leather Fibre Filled 166Floraflon 160

Fluon 144, 153

Fluorel 29

Fluorinated Ethylene Propylene Copolymer (FEP) 26Fortron 128

GGeon 155

Granule

.. Acrylonitrile/Methylacrylate copolymer 18

.. Cellulose Acetate Butyrate 23

.. Cyclo-olefin copolymer 23

.. Poly L lactic acid - Biopolymer 30

.. Polyacrylamide/acrylate 30



.. Polyamide - Nylon 6, 6 - 30% Carbon Fiber Reinforced 45


.. Polycarbonate 63

.. Polycarbonate - 30% Carbon Fiber Reinforced 64



.. Polyetherketoneketone 75





INDEX

INDEX—

A-G

174


Telephone +44 1480 424 800 : Fax +44 1480 424 900




.. Polyhydroxyalkaonate - Biopolymer 103

.. Polyhydroxybutyrate - Biopolymer 104

.. Polyhydroxybutyrate/Polyhydroxyvalerate 12% - Biopo-lymer 106


.. Polyoxymethylene/Acetal Copolymer - 10% Carbon

Fiber Reinforced 125.. Polyphenylenesulphide - 20% Carbon Fiber Reinforced 129


.. Polystyrene 140

.. Polysulphone 144


HHalar 24

Hexafluoropropylenevinylidenefluoride copolymer (FKM ) 29

Honeycomb.. Polyaramid 53


Hostaflon 153

Hostaflon ET 25Hostaflon FEP 26

Hostaflon TF 144

Hostaform 122Hostalen GUR 87

Hostalen HD 78

Hostalen PP 131

Hostalit 155Hostaphan 94

Hydrogel 30

IImpet 94

KKaladex 91

Kalidar 91Kapton 106

Kel-F 65

Kemetal 122

Kerimid 48Kevlar 49

Kinel 106

Kynar 160

LLacovyl 155Lacqtene 82, 131

Lacqtene HD 78

Laminate



.. Polyimide 110

Lexan 59

Lucite 114Lucorex 155

Lump, TPE - 50% Leather Fibre Filled 166

Lupolen 78, 82Luranyl 126-127

Lustran 31

MMakrofol 59, 64

Makrolon 59Maranyl A 40, 44

Maranyl B 33

Melinar 94

Melinex 94Mesh






Metallized Film.. Cellulose Acetate 21

.. Polycarbonate 62


.. Polyimide 109



Monofilament







.. Polyphenylenesulfide 128

Mylar 94

NNeoflon 65Nomex 51

Non-Woven Fabric, Polyhydroxybutyrate - Biopolymer 104

Noryl 126-127

Novodur 31Novolen 131

Nylacast 33

OOrgamid 33

Orgater 57, 59Oroglas 114

PPerspex 114

Plexiglas 114

Pokalon C 64

Poly L lactic acid - Biopolymer (PLLA) 30Polyacrylamide/acrylate (Hydrogel) 30

Polyacrylonitrile (PAN) 30

Polyacrylonitrile-butadiene-styrene (ABS) 31Polyamide - Nylon 4, 6 (PA 4,6) 32

Polyamide - Nylon 6 (PA 6) 33

Polyamide - Nylon 6 - 30% Glass Fiber Reinforcd (PA 6

30% GFR) 39Polyamide - Nylon 6, 6 (PA 6,6) 40


(PA 6, 6 - 30% CFR) 44

Polyamide - Nylon 6, 6 - 30% Glass Fiber Reinforced (PA6,6 30% GFR) 44

Polyamide - Nylon 11 (PA 11) 45

Polyamide - Nylon 12 (PA 12) 46Polyamide - Nylon 12 - 30% Glass Fiber Reinforced (PA

12 - 30% GFR) 47

Polyamide/imide (PAI) 48

Polyaramid (Polymetaphenylene isophthalamide) 51Polyaramid (Polyparaphenylene terephthalamide) 49

Polybenzimidazole (PBI) 56

INDEX

INDEX—

H-P

175


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Polybutylene terephthalate (PBT) 57Polybutylene terephthalate - 30% Glass Fiber Reinforced

(PBT 30% GFR) 59

Polycarbonate (PC) 59

Polycarbonate - 30% Carbon Fiber Reinforced (PC - 30%CFR) 64

Polycarbonate - 30% Glass Fiber Filled (PC - 30% GFR) 64

Polycarbonate - Conductive (PC) 64

Polychlorotrifluoroethylene (PCTFE) 65Polyetheretherketone (PEEK) 66

Polyetherimide (PEI) 72

Polyetherketoneketone (PEKK) 75Polyethersulfone (PES) 75

Polyethylene - Carbon filled (PE) 78

Polyethylene - High density (HDPE) 78

Polyethylene - Low Density (LDPE) 82Polyethylene - Medium Density (MDPE) 87

Polyethylene - U.H.M.W. (UHMW PE) 87

Polyethylene naphthalate (PEN) 91

Polyethylene terephthalate (Polyester, PET, PETP) 94Polyhydroxyalkaonate - Biopolymer (PHA) 103

Polyhydroxybutyrate - Biopolymer (PHB) 104

Polyhydroxybutyrate/Polyhydroxyvalerate 2% - Biopoly-

mer (Biopolymer) 104Polyhydroxybutyrate/Polyhydroxyvalerate 8% - Biopoly-

mer (PHB92/PHV 8) 105

Polyhydroxybutyrate/Polyhydroxyvalerate 12% - Biopoly-mer (PHB88/PHV12) 106

Polyimide (PI) 106

Polymethylmethacrylate (PMMA, Acrylic) 114

Polymethylpentene (TPX1) 119Polyoxymethylene - Copolymer (Acetal - Copolymer

POMC) 122

Polyoxymethylene - Homopolymer (Acetal - Homopolymer

POMH) 124Polyoxymethylene/Acetal Copolymer - 10% Carbon Fiber

Reinforced (POMC - 10% CFR) 125

Polyphenyleneoxide (modified), 30% Glass Fiber Rein-forced (PPO 30% GFR) 127

Polyphenyleneoxide (PPO (modified), PPE (modified)) 126

Polyphenylenesulfide (PPS) 127

Polyphenylenesulfide - 40% Glass Fiber Reinforced (PPS -40% GFR) 128

Polyphenylenesulphide - 20% Carbon Fiber Reinforced

(PPS - 20% CFR) 129

Polyphenylsulfone (PPSu) 130Polypropylene (PP) 131

Polystyrene (PS) 138

Polystyrene - Conductive (High Impact Conductive Poly-

styrene) 140Polystyrene - Cross-linked (PS - X - Linked) 141

Polystyrol 138

Polysulphone (PSu) 143Polytetrafluoroethylene (PTFE) 144

Polytetrafluoroethylene coated Glass Fabric (PTFE 75 /

Glass 25) 152

Polytetrafluoroethylene filled with Glass (PTFE 25% GF) 153Polyvinylchloride - Unplasticized (UPVC) 155

Polyvinylfluoride (PVF) 157

Polyvinylidenechloride (PVDC) 158

Polyvinylidenefluoride (PVDF) 160Powder

.. Polyacrylonitrile 31





.. Polyethylene - Medium Density 87


.. Polyhydroxybutyrate/Polyhydroxyvalerate 2% - Biopo-

lymer 104.. Polymethylmethacrylate 118

.. Polystyrene 139



.. Polyvinylidenechloride 159

Propathene 131

QQ.200.5 141

RRadel R 130

Rayophane 18Rexolite 141

Rigidex 78

Rilsan A 46

Rilsan B 45Rod



.. Polyacrylonitrile-butadiene-styrene 32



.. Polyamide - Nylon 6 - 30% Glass Fiber Reinforcd 39


.. Polyamide - Nylon 6, 6 - 30% Glass Fiber Reinforced 44



.. Polyamide - Nylon 12 - 30% Glass Fiber Reinforced 47

.. Polyamide/imide 48

.. Polybenzimidazole 56


.. Polybutylene terephthalate - 30% Glass Fiber Reinforced 59

.. Polycarbonate 62

.. Polycarbonate - 30% Glass Fiber Filled 64

.. Polychlorotrifluoroethylene 65










.. Polyimide 111



.. Polyoxymethylene - Copolymer 122


.. Polyphenyleneoxide 126

.. Polyphenyleneoxide (modified), 30% Glass Fiber Re-

inforced 127

.. Polyphenylenesulfide - 40% Glass Fiber Reinforced 128

.. Polyphenylsulfone 130


.. Polystyrene - Cross-linked 141

.. Polysulphone 143






.. Tetrafluoroethylene-perfluoro(alkoxy vinyl ether) - Co-

polymer 168.. Vectra A1 - 15% Glass Fiber Reinforced 168

.. Vectra A1 - 25% Glass Fiber Reinforced 169

INDEX

INDEX—

Q-R

176


Telephone +44 1480 424 800 : Fax +44 1480 424 900


.. Vectra A1 - 30% Glass Fiber Reinforced 169

.. Vectra A1 - Liquid Crystal Polyester 171

.. Vectra B1 - 30% Glass Fiber Reinforced 172

.. Vectra B1 - Liquid Crystal Polyester/amide copolymer 172

.. Vectra MT1300 - Liquid Crystalline Polyester 173Ronfalin 31

Rynite 94

Ryton 128

SSaran 158Sheet

.. Acrylonitrile/Methylacrylate copolymer 18



.. Hexafluoropropylenevinylidenefluoride copolymer 29

.. Polyacrylonitrile-butadiene-styrene 31




.. Polyamide - Nylon 6, 6 - 30% Glass Fiber Reinforced 44



.. Polyaramid 54

.. Polybenzimidazole 56


.. Polycarbonate 62

.. Polychlorotrifluoroethylene 65









.. Polyimide 111





.. Polyphenyleneoxide 126

.. Polyphenyleneoxide (modified), 30% Glass Fiber Re-

inforced 127

.. Polyphenylenesulfide - 40% Glass Fiber Reinforced 128

.. Polyphenylsulfone 130


.. Polystyrene 139

.. Polystyrene - Conductive 140

.. Polystyrene - Cross-linked 141






.. Tetrafluoroethylene-perfluoro(alkoxy vinyl ether) - Co-polymer 167

.. Vectra B1 - 30% Glass Fiber Reinforced 171

Silastic 163

Silicone Elastomer (MQ/VNQ/PMQ/PVMQ) 163Silopren 163

Solef 160

Sphere.. Hexafluoropropylenevinylidenefluoride copolymer 29








Stamylan HD 78

Stamylan LD 82

Stamylan UH 87Stanyl 32

Styron 138

Supec 128

TTedlar 157Teflon 153

Teflon FEP 26

Teflon TFE 144

Tefzel 25Tenac 124

Tenite Acetate 20

Tenite Butyrate 22

Terylene 94Tetrafluoroethylene-perfluoro(alkoxy vinyl ether) - Copoly-

mer (PFA. Teflon PFA.) 167

Torlon1 48

TPE - 50% Leather Fibre Filled (TPE - 50% Leather FibreFilled) 166

TPX1 119

Trevira 94Tube




.. Polycarbonate 63





.. Polyimide 112







Twaron 49

UUdel1 143

Ultem 72

Ultraform 122Ultramid B 33

Ultrason E 75

Ultrason1 S 143Upilex 106

Upimol 106

Utramid A 40, 44

VValox 57, 59

Vectra A 170Vectra A1 - 15% Glass Fiber Reinforced (Liquid Crystal

Polyester - 15% GFR) 168

Vectra A1 - 25% Glass Fiber Reinforced (Vectra A1 - 25%GFR) 168

Vectra A1 - 30% Glass Fiber Reinforced (Vectra A1 - 30%

GFR) 169

Vectra A1 - Liquid Crystal Polyester (Vectra A1) 170Vectra B 172

Vectra B1 - 30% Glass Fiber Reinforced (Liquid

INDEX

INDEX—

S-V

177


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Crystal Polyester - 30% GFR) 171Vectra B1 - Liquid Crystal Polyester/amide copolymer

(Vectra B1) 172

Vectra MT1300 - Liquid Crystalline Polyester (Vectra

MT1300) 173Vespel 106

Vestamid 46

Vestoran 126-127

Victrex 66, 75

XXydar 170

ZZyex 66

Zytel 40, 44

INDEX

INDEX—

X-Z

178


Telephone +44 1480 424 800 : Fax +44 1480 424 900


Date post:	19-May-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Goodfellow Cambridge Limited · Thin sheets of pure metal and metal alloys. Due to their fragile...

Documents