GLASS & HARDWARE
& qualityproductcatalogue
About Goodline Glass & Hardware 3
GLASS
Modular Glass Panels 4-5
GLASS HARDWARE
Frameless Glass Spigot Sets 6
Glass Hardware Grout 7
Gate System 8-9
Glass Gate Lathes & Hinges 10-11
Glass Handrail Fittings 12
Glass Stand-Off Pins 13
Glass Clamps 14-15
BALUSTRADE POSTS
Pre-Fabricated Intermediate Posts 16-19
STAINLESS HARDWARE
Swage Terminals 20
Swage Terminals, Grommets & Washes 21
Lag/ Eye Screws/Hose Reel 22
End Caps/Eye Bolts/Eye Nuts 23
Shower Posts 24-25
Goodline Ultimate Tube 26
Welded Tube 27
Base / Cover Plates, Flanges 28
Handrail Supports 29
taBle oF coNteNtS
Goodline Showroom2 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
aBout our coMpaNYGoodline Glass and Hardware specialises in the supply of modular glass panels and glass and stainless hardware products.
We are a privately owned company backed by over 15 years of experience and research in the balustrade and pool fence fabrication and installation industry.
aBout our productS At Goodline Glass and Hardware, we realise that exceptional design and quality are paramount to our customers. Therefore, we have specially designed many of our products to ensure that our customers receive products that are the best in the market.
We have specifically sourced only the highest quality materials, and use the latest techniques in manufacturing to ensure that our products are built to last.
Customers are welcome to visit our showroom to view samples of our products, and discuss their buying needs with us. Our showroom is located at the Goodline Group Head Office, 124-126 Steel Street, Capalaba QLD 4157.
HoW to uSe tHIS catalogue This catalogue has been produced and designed by Goodline Glass and Hardware, with thanks to iCreate Solutions. It is designed to provide detailed product specifications and to assist in product selection and ordering.
Although accurate at the time of printing, information contained in this catalogue is subject to change without notice.
If you require further information or assistance about any of the products listed within, please contact us on any of the contact details listed at the bottom of this page.
DEFINITIONS 304 : 304 Grade Stainless Steel 316 : 316 Grade Stainless Steel 316L : Low Carbon 316 Grade stainless steel Wgt : Weight of an item (g or kg) OD : Outside Diameter
All Measurements are given in Millimetres unless otherwise specified.
HOW TO ORDER For information on our products, pricing, or to place an order, please contact us on the details below.
Please note that information on delivery charges, terms of payment and our returns policy are also available when contacting us.
Phone: 07 3245 1077 Fax: 07 3245 6973 Email: [email protected] Showroom: 124-126 Steel Street, Capalaba Qld 4157 www.goodlinegroup.com.au/glassandhardware
Goodline Head Office
MODULAR GLASS PANELS
Goodline Glass and Hardware stocks large quantities of high quality glass panels in a range of sizes. Our glass has been specifically sourced to ensure that quality is excellent, and cost is kept to a minimum.
All panels are 12mm toughened glass, and can be coated or tinted as desired. Custom cut panels are available for order.
All glass is stamped with a small logo confirming the Australian Standard Licence number to ensure safety.
4 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
GLA
SSModular glaSS paNelS
5GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
MODULAR GLASS PANEL SIZES•All glass panels are 12mm toughened glass with glazing certificate available • Large quantities of pre-cut sizes in stock•Custom-cut panels available to order•Custom coating and tinting also availablePart Code Glass Glass Glass Glass Thickness Width Height Glass m2 Weight mm mm mm KgPanel P12-400x1200 12mm 400 1200 .48 14
Panel P12-500x1200 12mm 500 1200 .60 18
Panel P12-600x1200 12mm 600 1200 .72 22
Panel P12-700x1200 12mm 700 1200 .84 25
Panel P12-800x1200 12mm 800 1200 .96 29
Panel P12-900x1200 12mm 900 1200 1.08 32
Panel P12-1000x1200 12mm 1000 1200 1.20 36
Panel P12-1100x1200 12mm 1100 1200 1.32 40
Panel P12-1200x1200 12mm 1200 1200 1.44 43
Panel P12-1300x1200 12mm 1300 1200 1.56 47
Panel P12-1400x1200 12mm 1400 1200 1.68 50
Panel P12-1500x1200 12mm 1500 1200 1.80 54
Panel P12-1600x1200 12mm 1600 1200 1.92 58
Panel P12-1700x1200 12mm 1700 1200 2.04 61
Panel P12-1800x1200 12mm 1800 1200 2.16 65
Panel P12-1900x1200 12mm 1900 1200 2.28 68
Panel P12-2000x1200 12mm 2000 1200 2.40 72
Gate GFS12-900x1240 12mm 900 1200 1.08 32
Gate* GFS12-850x1240 12mm 850 1200 1.02 30.6
Gate GFS12-800x1240 12mm 800 1200 0.96 28.8
Gate* G8-900x1200 8mm 900 1200 1.08 21.6
Gate G8-850x1200 8mm 850 1200 1.02 20.4
Gate G8-800x1200 8mm 800 1200 0.96 19.2
* 12mm glass is recommended for frameless application, and 8mm glass for semi-frameless application.
GLA
SS
Modular glaSS paNel SIZeS
6 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
CORE DRILL SPIGOT SET•Made from solid billet 316L (low carbon) grade stainless steel (not a
casting) •Mirror finish. (available in satin upon special request)• Suits 10mm and 12mm glass (no holes required in glass)• Includes cover plate, pressure plate and plastic insert.Code Diameter Finish
SPIG-CORE-R-CP 48mm Mirror
DECk MOUNT SPIGOT SET• Solid 316L grade stainless steel - low carbon content•Mirror finish. (available in satin upon special request)• Suits 10mm and 12mm glass (no holes required in glass)• Includes adjustable mounting plate, cover plate, pressure plate, plastic
insert and screws
Code Diameter Finish
SPIG-DECk-R-CP 48mm Mirror
GLA
SS H
AR
DW
AR
EFraMeleSS glaSS SpIgot SetS
7GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
EPERIZ INSTANT GROUT – 15kG• Structural Grout•When using the core drill fixing method we supply easy to use Epirez 5
Star rapid set grout. Simply add water, mix and pour into hole.• The grout will be strong enough to support glass within 1 hour.• Setting times: 20MPA in 2 hours, 30MPA in 4 hoursCode Weight
G-E991609 15kg
GLA
SS H
AR
DW
AR
E
glaSS HardWare grout
8 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
HyDRAULIC FLOOR SPRING• Non-hold open floor spring unit, complete with stainless steel surround• Our sealing compound pack is recommended for areas subjected to water• Max door width 1100mm• Max door weight 100kg
• Cover plate available in mirror or satin finishCode Width Length Height
FS+B-SSM 108mm 306mm 40mm FS+B-SSS 108mm 306mm 40mm
TOP PATCH• 316 Stainless Steel • Requires 20mm dia. glass holes• Glass gate cutout measurements as per drawing• Use in conjunction with Wall Pivot or Top Patch Pivot ArmCode Finish
TP-SSM Mirror TP-SSS Satin
BOTTOM PATCH• Use in conjunction with Hydraulic Floor Spring• 316 Stainless Steel• Requires 20mm dia. glass holesCode Finish
BP-SSM Mirror BP-SSS Satin
WALL PIvOT• Use in conjuction with Top Patch • Pivots from wall or flat surface• 316 Stainless Steel• Available in Mirror or Satin finishCode Finish
PIv-WALL-SSM Mirror PIv-WALL-SSS Satin
GLA
SS H
AR
DW
AR
Egate SYSteM
9GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
MEDIUMLEFT / RIGHT SUPPORTS
TOP PATCH PIvOT ARM• Standard 180 degree (left and right 90 degree available)• Use in conjunction with Top Patch• 316 Stainless Steel• Glass cutout measurements same as Top PatchCode Finish
TP-SSM+PA Mirror TP-SSS+PA Satin
SEALING COMPOUND• Sealing compound to protect floor spring unit from water damage • Highly recommended for areas subjected to water• Two pack mixCode
RESIN-FS
MedIuM leFt / rIgHt SupportS
GLA
SS H
AR
DW
AR
E
gate SYSteM
10 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
GLASS TO ROUND POST FRICTION LATCH•Deluxe slimline friction latch which fits glass to round pos•Hard wearing components with 316 grade stainless steel •Non key lockableCode Finish
GL-R50-SSM Mirror GL-R50-SSS Satin
GLASS TO GLASS 90o FRICTION LATCH•Deluxe slimline friction latch which fits glass to glass•Hard wearing components with 316 grade stainless steel • In-swing style available upon special request•Non key lockableCode Finish
GL-90-SSM Mirror GL-90-SSS Satin
GLASS TO GLASS 180o FRICTION LATCH• Deluxe slimline friction latch which fits glass to glass• Hard wearing components with 316 grade stainless steel • Gate side requires 10mm dia. glass holes for safetyCode Finish
GL-STD-SSM Mirror GL-STD-SSS Satin
GLA
SS H
AR
DW
AR
EglaSS gate latcHeS & HINgeS
11GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
MEDIUMLEFT / RIGHT SUPPORTS
ROUND POST HINGE• Suits 8mm gate• 316 grade Stainless Steel• Self closing, spring loadedCode Finish
HR-50-SSS Satin
SQUARE POST/FLAT SURFACE HINGE• Suits 8mm gate• 316 grade Stainless Steel• Self closing, spring loadedCode Finish
HF-50-SSS Satin
GLASS TO WALL FRICTION LATCH•Deluxe slimline glass clamp friction latch which fits glass to wall or
square post•Hard wearing components with 316 grade mirror finish stainless steel•Gate side requires 10mm dia. glass holes for safety•Non key lockableCode Finish
GL-SQ-50-SSM Mirror GL-SQ-50-SSS Satin
MedIuM leFt / rIgHt SupportS
E-MAIL ORDERS TO: [email protected] PLEASE QUOTE CODES. PAGE
GLASS POOL FENCINGGLASS GATE TO SQUARE POST
HINGE
LATCH
CODESSGH316-SQUARE
GLASS TO SQUARE POST HINGE STAINLESS STEEL
LONG LEG AND FLAT FACE LEG.SUITS 10mm GLASS GATES
LOAD RATING 50kg PER PAIR10mm DIA. HOLE REQUIRED.
CODEGF-PGF75
SLIM LINE SERIES 75mm HIGHSUIT SQUARE POST
10mm HOLES REQUIRED
316 STAINLESS STEEL
21
OLD STYLE LATCH STILL AVAILABLE
GLA
SS H
AR
DW
AR
E
glaSS gate latcHeS & HINgeS
12 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
HANDRAIL SUPPORT FLAT CAP ROUND •Made from solid billet 316L (low carbon) grade stainless steel (not a
casting) • Suitable for 10, 12 and 15mm glass
Code Diameter FinishHRS+FL-50-SSM 50 Mirror HRS+FL-50-SSS 50 Satin
GA GRIPS•Multigrips sold with interchangable square and radius plastic jaws•Use to adjust and tighten stand-off handrail supports Code
GA-GRIP
HANDRAIL SUPPORT (WALL MOUNT)•Made from solid billet 316L (low carbon) grade stainless steel (not a
casting) • Fixed to a range of wall surfaces via 3 x counter-sunk screw holes in
mounting plate. • Stylish cover to match glass handrail support. • kit has 80mm offset centreline as standard. Different offsets available
upon special request.Code Item Diameter Finish Specs
HRBM-180x12-SSM Rod 50 Mirror 80 HRBM-180x12-SSS Rod 50 Satin 80
HRS+WM-BASE-SSM Base 50 Mirror - HRS+WM-BASE-SSS Base 50 Satin -
HRS+WM-kIT-SSM kit 50 Mirror 80 HRS+WM-kIT-SSS kit 50 Satin 80
(kit shown in photo)
HANDRAIL SUPPORT CONE CAP ROUND •Made from solid billet 316L (low carbon) grade stainless steel (not a
casting) • Suitable for 10, 12 and 15mm glass
Code Diameter FinishHRS+CN-50-SSM 50 Mirror HRS+CN-50-SSS 50 Satin
GLA
SS H
AR
DW
AR
EglaSS HaNdraIl FIttINgS
13GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
MEDIUMLEFT / RIGHT SUPPORTS
GLASS STAND-OFF PIN “CONE CAP ROUND” • 316 Satin Stainless Steel•Customised base options are available upon special request. Machining
fee will apply• Suitable for 10, 12 and 15mm glassCode Base Diameter Finish
SO+CN-D50x30-316-SSM 30 50 Mirror SO+CN-D50x30-316-SSS 30 50 Satin
SO+CN-D50x50-316-SSM 50 50 Mirror SO+CN-D50x50-316-SSS 50 50 Satin
GLASS STAND-OFF PIN “FLAT CAP ROUND” • 316L (low carbon) Stainless Steel•Customised base options are available upon special request. Machining
fee will apply• Suitable for 10, 12 and 15mm glassCode Base Diameter Finish
SO+FL-D50x30-316-SSM 30 50 Mirror SO+FL-D50x30-316-SSS 30 50 Satin
SO+FL-D50x50-316-SSM 50 50 Mirror SO+FL-D50x50-316-SSS 50 50 Satin
MedIuM leFt / rIgHt SupportS
LAG SCREW M12•Made from solid billet 316L (low carbon) grade stainless steel (not a
casting) • Suits Stand-off PinCode
LS-M12-316SS
GLA
SS H
AR
DW
AR
E
glaSS StaNd-oFF pINS
14 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
GC-RB-LD-SSMGC-FB-LD-SSMGC-RB-LD-SSMGC-FB-LD-SSS
GLASS CLAMP – LARGE “D” • Allgasketsincluded • Clampscansupportapprox.60-80kgsper2clampsverticallypositioned
Code Finish SuitGlass
SuitPost H L W T D Wgt
GC-FB-LD-SSM M 8.0, 10.0,12.0 Sq/Flat 55 60 32 16 9.0 405g
GC-FB-LD-SSS S 8.0, 10.0, 12.0 Sq/Flat 55 60 32 16 9.0 405g
GC-RB-LD-SSM M 8.0, 10.0, 12.0 2” Round 55 60 32 16 9.0 405g GC-RB-LD-SSM S 8.0, 10.0, 12.0 2” Round 55 60 32 16 9.0 405g
D
T
WL
H
*Note: “L” measurement for radius black is from centre of radius
GLA
SS H
AR
DW
AR
EglaSS claMpS
15GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
GC-FBLS-SSM GC-RB-LS-SSMGC-FB-LS-SSS GC-RB-LS-SSS
GLASS CLAMP – LARGE SQUARE • Allgasketsincluded • Clampscansupportapprox.60-80kgsper2clampsvertically positioned
Code Finish SuitGlass
SuitPost H L W T D Wgt
GC-FB-LS-SSM M 8.0, 10.0, 12.0 Sq/Flat 55 55 32 16 9.0 440g
GC-FB-LS-SSS S 8.0, 10.0, 12.0 Sq/Flat 55 55 32 16 9.0 440g
GC-RB-LS-SSM M 8.0, 10.0, 12.0 2” Round 55 55 32 16 9.0 440g
GC-RB-LS-SSS S 8.0, 10.0, 12.0 2” Round 55 55 32 16 9.0 440g
*Note: “L” measurement for 201 Series is from centre of radius
D
T
WL
H
GLA
SS H
AR
DW
AR
E
glaSS claMpS
16 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
Code Finish
IP-SW-SSM Mirror IP-SW-SSS Satin
Code Finish
IP-RW-SSM Mirror IP-RW-SSS Satin
ROUND POST GLASS CLAMP FIxINGS• Save time and money by using pre fabricated intermediate posts•Custom sizes / raked for stairs available on request• Suits 8mm, 10mm, 12mm glass•Available with Large "D" or Large Square type glass clamps•Made from 316 grade stainless steelCode Finish
IP-RG-SSM Mirror IP-RG-SSS Satin
PRE MADE INTERMEDIATE POSTS - 25MM SQUARE• Save time and money by using pre fabricated
intermediate posts•Custom sizes / raked for stairs available on
request• Suits wire or tubular balustrade•Made from 316 grade stainless steel
ROUND RHS POST• Save time and money by using pre fabricated
intermediate posts•Custom sizes / raked for stairs available on
request
BALU
STR
AD
E PO
STS
pre-FaBrIcated INterMedIate poStS
17GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
MEDIUMLEFT / RIGHT SUPPORTS
SQUARE POST GLASS CLAMP FIxINGS • Save time and money by using pre fabricated intermediate posts•Custom sizes / raked for stairs available on request• Suits 8mm, 10mm, 12mm glass•Available with Large "D" or Large Square type glass clamps•Made from 316 grade stainless steelCode Finish
IP-SG-SSM Mirror IP-SG-SSS Satin
MedIuM leFt / rIgHt SupportS
BALU
STR
AD
E PO
STS
pre-FaBrIcated INterMedIate poStS
18 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
ROUND POST GLASS CLAMP FIxINGS WITH TOP RAIL SADDLE• Save time and money by using pre fabricated intermediate posts•Made from 316 grade stainless steel• Suits 8mm and 10mm glass• Base plate allows easy fixing to concrete or timberCode Finish
IP-RDGL-SSM Mirror
SQUARE POST GLASS CLAMP FIxINGS WITH TOP RAIL SADDLE• Save time and money by using pre fabricated intermediate posts•Made from 316 grade stainless steel• Suits 8mm and 10mm glass• Base plate allows easy fixing to concrete or timberCode Finish
IP-SQGL-SSM Mirror
FLAT BAR OFFSET SPIDER POST• Save time and money by using pre fabricated intermediate posts•Made from 316 grade stainless steel• Suits 8mm and 10mm glass• Base plate allows easy fixing to concrete or timberCode Finish
IP-FBOS-SSM Mirror
875
8
700
125
2008-06-06
H:1050MM
MM
Robbin
Inspector
Drawer Size
Remark
SUS304Material
UnitDate
Client
Code
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
YK-9260
1050
ø16
ø28
200
60
10
150100
1050
50
75
62°
36°
id1131187 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
Unit
Material SUS 316/304
RemarkMMYK-9238Code
Client
Date
SizeDrawer
Inspector
Robbin H1050MM
2008-06-06
1050
102
45
713
45
8
125
758
45
80
8
928
1050
62
26.5
45
10040
Ø42
id1036734 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
ø92ø50
45
26.5
62
1050
933
8
75
50
758
125
8
45
713
45
102
1050
H:1050MMRobbin
Inspector
Drawer Size
Date
Client
Code YK-9220 MM RemarkSUS 316/304Material
Unit
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
Ø42
2008-06-06
id1012687 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
BALU
STR
AD
E PO
STS
pre-FaBrIcated INterMedIate poStS
19GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
MEDIUMLEFT / RIGHT SUPPORTS
FLAT BAR BOSS POST WITH TOP RAIL SADDLE• Save time and money by using pre fabricated intermediate posts•Made from 304 grade stainless steel• Suits 8mm and 10mm glass• Base plate allows easy fixing to concrete or timber• Adjustable balustrade bosses to suit 12mm round tubeCode Finish
IP-FBB-SSM Mirror
FLAT BAR SPIDER POST WITH TOP RAIL SADDLE• Save time and money by using pre fabricated intermediate posts•Made from 304 grade stainless steel• Suits 8mm and 10mm glass• Base plate allows easy fixing to concrete or timber•Glass clamping arms adjust to accommodate angles for glass on ramps,
landings or stairs.Code Finish
IP-FBS-SSM Mirror
MedIuM leFt / rIgHt SupportS
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
Unit
Material SUS 316/304
RemarkMM0806-01Code
Client
Date
SizeDrawer
Inspector
Robbin H:1050MM
2008-06-10
100 70
8
Ø42
125
126.3
126.3
126.3
126.3
126.5
75
1050
958
Ø
12.7
50
3840
1050.4
126.3
id1061671 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
8
130 70
JINXIN HANDWARE FACTORY/WWW.DOORWARE.NET
Unit
Material SUS 316/304
RemarkMM0806-02Code
Client
Date
SizeDrawer
Inspector
Robbin H:1050MM
2008-06-10
180
125
125
769
1050
ø16
ø
28
40
1050
8
Ø
42.4
id1084656 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
BALU
STR
AD
E PO
STS
pre-FaBrIcated INterMedIate poStS
BUTTON HEAD TERMINAL SWAGE
• 316 grade stainless steel
Code Rope Ø D D1 L L1 L2 RWL TDL Wgt
BHTS-3.2 3.2 9.5 6 38 35 28 250 1000 6g
BHTS-4.0 4.0 12.5 7 54 50 44 475 1900 14g
D
LL1
L2D1
CONE HEAD TERMINAL•Gives a flush look to balustrade jobs when used in conjunction with a
countersunk drill bit• 316 grade stainless steel
Code Rope Ø D L L1 Wgt
CHT-3.2 3.2 6 58 53.5 12g
CHT-4.0 4.0 7 69.5 63 20g
ALLEN KEY HEAD TENSIONER • Suitable for use with threaded terminals (see pg19) in either stairway or
horizontal balustrading applications• Internal thread•Use with bevelled washers to complete a staircase• 316 grade stainless steelCode Thread D L L1 Wgt
AkHT-M5 M5 8 42 40 11g
AkHT-M6 M6 8 42 40 8g
LAG SCREW / SWAGE TERMINAL • Sleek, easy to use and economical balustrade terminals•When ordering, each length must have a L/Hand & R/Hand terminal•Not suitable for long lengths• 316 grade stainless steelCode Wire Ø E L L1 L2 Wgt
LS-ST-L 3.2 6/LHT 90 48 42 15g
LS-ST-R 3.2 6/RHT 90 48 42 15g
LAG SCREW / TERMINAL • 316 grade stainless steelCode T E L L1 L2 Wgt
LST-M5 M5 5/LHT 92.5 44 38.5 12g
LST-M6 M6 6/RHT 96 .049 39.0 17g
D
LL1
LL1
D
L L1L2
E
LL1L2
E
FORK TERMINAL SWAGE• 316 grade stainless steel
Code Rope Ø A D L1 L2 RWL TDL Wgt
FT-1/8x5MMPIN 3.2 8.5 5 65 32 313 1250 22g
L1
D
L2
A
20 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
STA
INLE
SS H
AR
DW
AR
ESWage terMINalS
THREADED TERMINAL SWAGE STUD W/LOCK NUT
• 316 grade stainless steel*Also available in left hand thread
Code Rope Ø T D L L1 L2 Wgt
TTSS-LN-M5 3.2 M5 6 90 42 39 14g
TTSS-LN-M6 3.2 M6 6 100 48 39 18g
LL1 L2
TD
BEVELLED WASHER • 35° angled washer for use with cone head terminals (stairway +
balustrading)• 304 grade stainless steelCode A L D I Wgt
BW-304-11.8 35° 13.3 11.8 7.1 4g
BW-304-13.8 35° 16.3 13.8 8.0 7g
NYLON GROMMET SPLIT TYPE •Nylon bush for protecting wire from cutting on sharp objects, push-fit into
posts• Install after balustrading is installedCode D D1 D2 H Colour Drill Hole Ø Wire Rope Ø
NGST-B 6.5 9.0 12.5 2.5 Black 11/32” 3.2 - 5.0
NGST-S 6.5 9.0 12.5 2.5 Silver 11/32” 3.2 - 5.0
NGST-C 6.5 9.0 12.5 2.5 Clear 11/32” 3.2 - 5.0
BEVELLED WASHER CHROME PLATED BRASS• 35° angled washer for use with swage fittings and tensioners
(stairway + balustrading)Code A D I L Wgt
BW-CP-6.3 35° 11 6.3 10 3g
BW-CP-8.3 35° 11 8.3 10 2g
D D1
HD2
I Ø
LD
A°
I Ø
LD
A°
NYLON GROMMET SPLIT TYPE - ANGLE• 37° angled grommet for use in stairsCode A B C D Colour Drill Hole Ø Wire Rope Ø
NGST-A-W 4.2 8 15 9 WHITE 11/32” 3.2 - 4.0
NGST-A-G 4.2 8 15 9 GREy 11/32” 3.2 - 4.0
NGST-A-B 4.2 8 15 9 BLACk 11/32” 3.2 - 4.0
C
BA
D
LBL1
T
D
H
Use in conjunction with CSPAN-RS-M5(Specialised Tools)
RIGGING SCREW JAW + SWAGE W/LOCK NUTS• 316 grade stainless steelCode Rope Ø T B D H L L1 RWL TDL WgtJAW T/B-5MM-316SS M5 8.5 5.0 9 155 80 150 750 52g
21GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
STA
INLE
SS H
AR
DW
AR
E
SWage terMINalS, groMMetS aNd WaSHerS
EYE SCREW (METAL THREAD) •A high quality threaded eye suitable for fixing to steel posts• Fully threaded shank for hard fixing to postsCode D L L1 L2 E Wgt
ESMT-M6x10 M6 26 10 10 6.1 10g
ESMT-M6x30 M6 43 30 26 6.1 11g
ESMT-M6x53 M6 69 53 50 6.1 16g
ESMT-M6x60 M6 77 60 50 6.1 15g
ESMT-M8x80 M8 89 80 70 7.9 36g
ESMT-M10x110 M10 119 110 100 10.1 68g
ESMT-M12x40 M12 63 40 25 12.3 60g
LAG EYE SCREW (TIMBER THREAD) Code D D2 L L1 L2 Weight
LS-R6xL45-316SS 4 4.2 30 45 51 4g
LS-R6xL55-316SS 6 6.3 32 55 65 11g
LS-R6xL60-316SS 8 8.4 40 60 70 22g
LS-R6xL80-316SS 10 10.5 55 80 100 53g
LS-R6xL105-316SS 12 12.5 65 105 123 94g
SOCKET DRIVE FOR LAG SCREWS• Insert in drill for fast installation of lag screwsCode D Suit Lag Screw WeightSDLS-M6 6.5 A/F LS-06 15g
SDLS-M8 9.0 A/F LS-08 50g
D2
L1D
LL2
D
D
L1
L2L
E
Time Saving Investment!
22 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
HOSE/ROPE REEL• Sturdy design and resistant to rust• Suitable for hoses or ropes• Residential or marine use•Custom engraving available• Lifetime warrantyCode Material
HR-304 304
STA
INLE
SS H
AR
DW
AR
Elag / eYe ScreWS / HoSe reel
23GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
END CAP “DOME” •A popular cast dome cap, used for handrail ends or freestanding post topsCode Tube Ø Wall B H Wgt
EC-D-1 1” 1.5 25.4 13 30g
EC-D-1.5 1 ½” 1.5 38.1 19 65g
EC-D-2 2” 1.5 50.8 25 150g
END CAP “FLAT” •A popular cast true flat end cap, used for handrail ends or freestanding
post topsCode Tube Ø Wall B H Wgt
EC-F-1 1” 1.5 25.4 1.8 20g
EC-F-1.5 1 ½” 1.5 38.1 3.5 50g
EC-F-2 2” 1.5 50.8 4.0 85g
END CAP “LIGHT kNOCk-IN” •Attractive self holding, slightly domed end cap •A soft faced hammer is used to tap these in place• Suitable for handrail ends or freestanding post topsCODE Tube Ø Wall B H Wgt
EC-LNI-1 1” 1.5 25.4 4.0 10g
EC-LNI-1.5 1 ½” 1.5 38.1 6.0 15g
EC-LNI-2 2” 1.5 50.8 8.0 30g
END CAP “SELF GRIP” • Apopularcast,intermediatedomecapwithknurledgripforfitintotube
Code Tube Ø Wall B H Wgt
EC-SG-1.5 1 ½” 1.5 38.1 2.5 65g
EC-SG-2 2” 1.5 50.8 2.5 125g
HB
H
B
H
B
STA
INLE
SS H
AR
DW
AR
E
eNd capS / eYe BoltS / eYe NutS
SHOWER POSTS
Goodline Glass and Hardware proudly stocks high quality stainless steel shower posts and fittings. Made from 316 stainless steel, the posts are suitable for both outdoor and indoor use. Supplied in mirror finish, both straight and curved options are available. A choice of shower rose and tap fittings are available and should be specified on orders. All shower posts are supplied as a complete set containing a stainless steel base, screws (with stylish cone-shaped caps), a shower rose, and tap fittings (please note Forme tap style supplied by default).
24 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
SHOWER POST - CURvEDCode Material Finish
SH-CUR 316 Mirror
SHOWER POST - STRAIGHTCode Material Finish
SH-STR 316 Mirror
STA
INLE
SS H
AR
DW
AR
ESHoWer poStS
25GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
STA
INLE
SS H
AR
DW
AR
E
SHoWer poStS
GOODLINE ULTIMATE TUBE
Goodline Ultimate Tube is a premium mirror polish tube that is highly reflective and a leading product in the market.
Goodline Ultimate is available only in 316L marine grade stainless steel which contains a low carbon content making it more resistant to discolouration of the surface, commonly referred to as ‘tea staining’. This feature is of particular importance for use near marine environments, or other salt water areas (such as salt water swimming pools). This tube requires lower maintenance than other grades of stainless steel to maintain its consistent, high quality finish.
Goodline Ultimate is available in four different profiles – Oval, D shape,Triangular and Round.
All Ultimate tube is packed in individual plastic sleeves toprotect it from scratching and marking.
Code Shape mm Wall Thickness Length (m)GUT4826-160 Oval 48.00 x 26.00 1.60 6
GUT6234-160 D Shape 62.00 x 34.00 1.60 6
GUT4826-160 Triangle 48.00 x 26.00 1.60 6
GUT19 -120 Round 19.05 1.20 5.8
GUT19 -160 Round 19.05 1.60 5.8
GUT22-120 Round 22.22 1.20 5.8
GUT22 -160 Round 22.22 1.60 5.8
GUT25 -120 Round 25.40 1.20 5.8
GUT25-160 Round 25.40 1.60 5.8
GUT31 -160 Round 31.75 1.60 5.8
GUT38-120 Round 38.10 1.20 5.8
GUT38-160 Round 38.10 1.60 5.8
GUT44-160 Round 44.45 1.60 5.8
GUT44-200 Round 44.45 2.00 5.8
GUT50-160 Round 50.80 1.60 5.8
GUT63-160 Round 63.40 1.60 5.8
GUT76-160 Round 76.30 1.60 5.8
GUT101-160 Round 101.60 1.60 5.8
GUT101-200 Round 101.60 2.00 5.8
GUT152-160 Round 152.40 1.60 5.8
GUT152-200 Round 152.40 2.00 5.8
26 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
STA
INLE
SS H
AR
DW
AR
EgoodlINe ultIMate tuBe
O.D.
O.D.
W
H
O.D.
WH
O.D.
WH
StaINleSS Steel tuBINg
ROUND SLOTTED S/STEEL WELDED TUBE • Ideal for corner posts for balustrading and pool fencing •All tube available in cut lengths – cutting fee may apply• Slotted tube infill available – see page 50Code O.D. Wall W H Slot Finish Lgth Wgt
RSWT-SS 2” 1.5 15 15 Single Mirror 6m 13kg
RSWT-DS 2” 1.5 15 15 Double Mirror 6m 15kg
RSWT-NS 2” 1.5 15 15 90º Mirror 3m 6.5kg
SQUARE STAINLESS STEEL WELDED TUBE •Custom cut lengths available - cutting fee may applyCode OD Wall Finish Lgth Grade Wgt
SWT-SSM 50 1.5 Mirror 6mtr AISI 316 13kg
SWT-SSS 50 1.5 Satin 6mtr AISI 316 13kg
RECTANGLE STAINLESS STEEL WELDED TUBE•Custom cut lengths available - cutting fee may applyCode Wall Finish Lgth Width Height Grade Wgt
RWT-SSM 1.6 Mirror 6m 50 25 316
RWT-SSS 1.6 Satin 6m 50 25 316
27GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
STA
INLE
SS H
AR
DW
AR
E
Welded tuBe
28 | GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE
ROUND BASE PLATE ONLy (WELD) •Made from 304 grade stainless steel• “3” Hole base plate in mill surface finish• This item must be weldedCode Tube Ø A B I T Wgt
RD-BP-0.5 ½” 65 2.0 6.5 13.0 51g
RD-BP-1.0 1” 65 2.0 6.5 25.5 44g
RD-BP-1.5 1 ½” 80 2.0 6.5 38.3 59g
RD-BP-2.0 2” 100 3.0 8.5 51.0 129g
A
T
BI Ø
WALL STOP FLANGE •Made from 316 grade stainless steel• “3” hole cast angled flange (please specify stairway angle when
ordering)• Suitable for fixing handrails down stairways between timber, masonry or steel
posts • Flange can be turned 180 ° to complete the stairway handrail
Code Tube Ø D A B W I Wgt
WSF-32-1.5 1 ½” 32° 97 38.1 64 6.5 205g
WSF-45-2 2” 45° 130 50.8 70 7.0 260g
WSF-37-2 2” 37° 110 50.8 70 6.0 260g
OBLONG BASE PLATE/FLANGE •Made from 316 grade stainless steel•Heavy duty cast “2” hole slab base• Suitable for fixing handrails in between timber, masonry or steel posts•May also be used for floor mounting where space is limitedCode Tube Ø A B C I Wgt
BPL-1.0 1” 70 25.4 40 5.0 85g
OBPL-1.5 1 ½” 75 38.1 56 5.0 140g OBPL-2.0 2” 100 50.8 69 6.5 255g
C
A
B I Ø
A
BD °
I Ø
W
ROUND BASE PLATE W/COvER (WELD) • Base plate made from 304 grade stainless steel. Coverplate made from
316 grade stainless steel• “3” Hole base plate with clip on cover• This item must be welded•Mirror polished cover plateCode Tube Ø A B I T Wgt
RD-BP+C-0.5 ½” 65 2.0 6.5 13.0 81g
RD-BP+C-1 1” 65 2.0 6.5 25.5 72g
RD-BP+C-1.5 1 ½” 80 2.0 6.5 38.3 100g
RD-BP+C-2 2” 100 3.0 8.5 51.0 217g
ROUND COvER PLATE ONLy •Made from 316 grade stainless steel•Domed cover plate • Suits posts/handrails which are set into a surface or over a fixed base
plate
Code Tube Ø A B H T Finish Wgt
RD-C-0.5 ½” 67 0.80 15 13.1 Mirror 30g
RD-C-0.5 1” 67 0.80 15 25.8 Mirror 28g
RD-C-0.5 1 ½” 82 0.80 17 38.4 Mirror 41g
RD-C-0.5 2” 102 0.80 26 51.2 Mirror 88g
RD-C-0.5 2” 102 0.80 26 51.2 Satin 88g
A
T
BI Ø
A
T
B
H
STA
INLE
SS H
AR
DW
AR
EBaSe / coVer plateS, FlaNgeS
29GOODLINE GLASS & HARDWARE PRODUCT CATALOGUE |
HANDRAIL SUPPORT “FLAT TOP” •Made from 316 grade stainless steel• Three hole handrail support designed for fixing to any type of wall• Flat top with countersunk holes allows a handrail to be attached without
the need for welding
Code A B C D I Wgt
HRS-FT 63 85 31 12 5.5 243g
HANDRAIL SUPPORT W/OUT TOP •Made from 316 grade stainless steel• Three hole handrail support designed for fixing to any type of wall• Unradiused fitting allows any handrail to be welded or fastened to the
bracketCode A B D I Wgt
HRS-WT 63 85 12 5.5 235g
H/RAIL SUPPORT W/- COACH SCREW “FLAT TOP” •Made from 316 grade stainless steel• Coach screw fix handrail support designed for fixing into timber stud wall• The flat top with countersunk holes allows a handrail to be attached
without the need for welding
Code A B C D L Wgt
HRS-CS-FT 63 85 31 12 60 280g
H/RAIL SUPP. W/- COACH SCREW W/OUT TOP •Made from 316 grade stainless steel• Coach screw fix handrail support designed for fixing into timber stud wall• Unradiused fitting allows any handrail to be welded or fastened to the
bracketCode A B D L Wgt
HRS-CS-WT 63 85 12 60 255g
HANDRAIL SUPPORT “RADIUSED” •Made from 316 grade stainless steel• Three hole handrail support designed for fixing to any type of wall• Radiused top with countersunk holes allows a handrail to be attached
without the need for welding
Code A B C D I R Wgt
HRS-R-1.5 63 85 31 12 5.5 1 ½” 247g
HRS-R-2 63 85 31 12 5.5 2” 247g
H/RAIL SUPPORT W/- COACH SCREW “RADIUSED” •Made from 316 grade stainless steel• Coach screw fix handrail support designed for fixing into timber stud wall• Radiused top with countersunk holes allows a handrail to be attached
without the need for welding
Code A B C D L R Wgt
HRS-CS-R-1.5 63 85 31 12 50 1 ½” 280g
HRS-CS-R-2 63 85 31 12 40 2” 280g
B
RC
AI Ø I Ø
D Ø
B
RCD Ø
D Ø L
A
D Ø
B
C
AI Ø I Ø
D Ø
B
C
D Ø L
A
AI Ø I Ø
B
D Ø
B
D Ø
D Ø L
A
STA
INLE
SS H
AR
DW
AR
E
HaNdraIl SupportS
GLASS & HARDWARE
124-126 Steel Street, Capalaba QLD 4157, AustraliaT: 07 3245 1077 F: 07 3245 6973E: [email protected]: www.goodlineglassandhardware.com.au
leaders & qualityin design