GPS NAVIGATION SYSTEM5V1 Hardware Instruction Manual

�

Congratulations on choosing a Invion product. We have every expectation that you will be completely satisfied with your new purchase.

To always guarantee optimal function and performance of your product, we would ask the following:

• Before using the appliance for the first time, carefully read the operating instructions and adhere to the safety precautions!• Also read the software user manual including the End User License Agreement.• All activities at and with this appliance may only be carried out as described in these operating instructions.• Please be sure to include the operating instructions in case you pass along this product to someone else.

PackagingThis appliance is delivered in protective packaging to prevent transportation damage. Packaging materials are raw materials and can therefore be recycled. Please recycle these materials.

5V1 Hardware Instruction Manual

�

Contents

1. Brief introduction of hardware 42. Entertainment 63. Bluetooth operation 84. Specifications 115. With reference to environmental protection 12

5V1 Hardware Instruction Manual

�

1. Brief introduction of hardwareStandard packageBefore getting started with your GPS, check to see that your Invion GPS package includes the following items. If you are missing any parts, please contact your dealer immediately.● GPS Unit ● Car power adapter● AC power adapter

1 GPS ANTENNA: Receives signals from GPS satellites when lifted up to the horizontal position.2. POWER: Press and hold for a few seconds to turn the unit On and Off.3. CARD SLOT: Slot for SD or MMC memory card.4. AV IN5. USB PLUG6. VOLUME: Use to adjust the volume.7. HEADPHONE JACK

8. DC IN9. MENU: Press to display the Top Menu.10. TEL: Press to change to Bluetooth mode. Press again to return to the previous mode.11. SOURCE: Use to shift between Navigation and AUX mode.12. TOUCH SCREEN13. MICROPHONE14. RESET: Use to reset the system (on the back of the unit).

5V1 Hardware Instruction Manual

�

About the Touch Screen• Do not touch the TOUCH SCREEN until the unit starts up completely. Otherwise, the touch screen may not function correctly.• The navigation device is mainly operated by touching the buttons on the touch screen.• If nothing happens when you touch the buttons on the touch screen, remove your hand or the stylus from the screen and touch the button again.• Do not touch any buttons that are grayed out.• When cleaning the touch screen, use a soft cloth.

Connect to Car Power• Connect the mini plug of the car adapter into the DC IN jack at the back of the device.• Connect the other plug of the car adapter into the car cigarette socket.

Chipset SIRF IIIOperates behind athermic windshield

5V1 Hardware Instruction Manual

�

2. Entertainment1. Insert the SD or MMC memory card to the card slot.

2. Tap on the Tap Menu to change to Media player mode. The folder list will be displayed.

3. Tap SDMMC DISK folder to open the folder. The file list will be displayed.

4. Select a folder and double tap to open it.

5V1 Hardware Instruction Manual

�

5. Select and double tap a file to start the playback.

The following buttons appear on the Entertainment screens.

Tap to display the entertainment interface. Tap to scroll up the folder list or file list. Tap to scroll down the folder list or file list. Tap to return to the folder list.

Tap to play the mpeg4 file (*.avi) in full screen mode. Tap to return to the file list. Tap to play the files in the SD/MMC card in a random order. Tap to play a file or all the files repeatedly.

Tap to return to the Top Menu. Tap to play the previous track.

Tap to pause the playback. Tap to play the next track. Tap to stop the playback. Tap to decrease the volume. Tap to increase the volume.

5V1 Hardware Instruction Manual

�

3. Bluetooth operationThe GPS is also a Bluetooth device, and it can be paired to a mobile phone with Bluetooth function.1. After turning on the unit, press the TEL button on the panel to change to Bluetooth mode. The screen shows:

2. Tap Pairing on the Bluetooth menu. The Screen shows:

3. Then use your mobile phone to search GPS and pair GPS. (For details refer to your mobile phone’s user guide.)

When pairing you Bluetooth phone with your GPS, enter the pass code 1234 on the phone to confirm.

5V1 Hardware Instruction Manual

�

4. When the pairing is successful, the screen shows:

Now, you can use GPS to take a telephone call.1) Tap numbers (0~9) on the screen to enter a telephone number, and tap YES to dial it.

2) When there is a coming call, the number will be displayed, tap YES to answer it or tap NO to cut it.3) Tap to turn off the microphone.4) Tap List to show the last telephone number that you have dialed, tap YES to redial it.5) Tap Auto on the screen, when there is a coming call, the unit will answer it automatically after 5 seconds.6) During a telephone call, you can use to shift between through the GPS and through your bluetooth phone. 7) In Navigation mode, when there is a coming call, the screen shows:

Tap YES to answer it, or tap NO to cut it.

5V1 Hardware Instruction Manual

10

The following buttons appear on the Bluetooth menu.

Use to turn the Bluetooth On or Off.

Tap to make the GPS discoverable.

Tap to activate the Auto Answer function.

Tap to increase the speaker volume or to scroll up the call list.

Tap to decrease the speaker volume or to scroll down the call list.

Tap to make or answer a call.

Tap to end or reject a call.

Tap to delete the entered number.

Tap to display the call list.

Tap to switch between the player and your mobile phone during a call.

Tap to turn off the microphone.

5V1 Hardware Instruction Manual

11

4. Specifications5” GPS Navigation with Bluetooth Handsfree and MP3 Player5” 16:9 Wide LCD Screen, 480*272 RGBOS: Windows CE.Net 4.264 MB SDRAMCPU : ARM 400 MHzGPS: SIRF Star 3 High Sensitivity ReceiverPlays MP3 file via SD/MMC cardBluetooth hands-free(need Mobile Phone Support)Built-In Lithium-Ion Battery lasts 3 hoursDimension: 148L X 85W X 34H mmWeight: 520g

Hard Key assignment MAPBluetooth: Switch to the Bluetooth ScreenAVSetupBuilt-in SD/MMC Slot USB connection jackPower charge jackHeadset jack

Accessories12V Car Adapter100—240V AC AdapterWindshield Suck Mounts bracketPackage

5V1 Hardware Instruction Manual

1�

5. With reference to environmental protection

Packing materials are raw materials and can be used again. Keep packing materials separate. For more information about recycling contact your local administration.

Old devices do not belong in the domestic refuse! Dispose of old devices responsibly, and contribute to environmental protection. Your local administration will inform you about collecting points and opening times.

Old batteries do not belong in the domestic refuse! Dispose of old batteries accordingly and contribute to environmental protection. Your local administration will inform you about collecting points and opening times.

This product complies with European directives

5V1 Hardware Instruction Manual