8/12/2019 Grand-piano 01 i e a4

1/7

Assembly Instructions

1: Carefully cut out the parts.

2: Make mountain folds and valley folds along

the dotted lines, as indicated by the directions.

3: Assemble the parts in the order shown by the

numbers on the glue tabs.

(Read the assembly instruction for more information.)

4: Attach the parts in order.

(Read the assembly instruction for more information.)

5:Your Paper craft model is finished.

What you need

Scissors, tweezers, glue(We recommend craft glue.)

Glue stick(used to attach wide surfaces together.)

Thread(size 20) (Used to string the piano.)

Instant adhesive (Recommended to attach the thread.)

Caution

Keep glue away from small children.

Be careful not to cut your fingers when using scissors.

Fold the folding lines before gluing.

Scissors line

Valley fold

Mountain fold

Cut in line

Cut out

Glue spot

You can give the piano a more "genuine" appearance if youpaint the surface after cutting out the black and yellow parts.

Handy Hint

Notation Key

This model was designed for Papercraft and may differ from the original in some respects.

Black and yellow paint has been added to the finished piece in the photo.

When assembling the parts, be sure to carefully read the "AssemblyInstructions" along with the parts sheet.

Grand piano

[Assembly Instructions] : Eleven A4 sheets

Front lid

Back lid

Music desk

Lock rail

Fallboard

Lockbar

Bridge

Strings

Frame

Lid prop

Heel

Backbottom

Leg

Sound board

Caster

Leg plate

Console

Pedals

Pedal plate

Braces Backbottom

Leg

Canon Inc.http://www.canon.com/c-park/

PAGE 01

Grand piano: Assembly Instructions Hiroshi Chiba / PAPERART-C

8/12/2019 Grand-piano 01 i e a4

2/7

A Making the grand piano's body.

Attach the parts as shown here.

Attach the parts as shown here.

Attach the parts as shown here.

Attach the parts as shown here.

Interlock a and a together.

Attach the parts as shown here.

Attach the parts as shown here.

Interlock b and b together.

As shown here, attach the back sides

together.

Cut out.

Cut the part to the correct size, and attach.

Canon Inc.http://www.canon.com/c-park/

PAGE 02

Grand piano: Assembly Instructions Hiroshi Chiba / PAPERART-C

8/12/2019 Grand-piano 01 i e a4

3/7

Assemble the parts as shown here.

Assemble the parts as shown here.

Assemble the parts as shown here.

Assemble the parts as shown here.

Attach the respective parts as shown here.

Attach the parts as shown here.

Canon Inc.http://www.canon.com/c-park/

PAGE 03

Grand piano: Assembly Instructions

Attach the reinforcing beams as shown

here.

Hiroshi Chiba / PAPERART-C

8/12/2019 Grand-piano 01 i e a4

4/7

Attach the parts as shown here.

Attach the reinforcing beams as shown

here.

Attach the parts as shown here.

Roll up and attach.

Curve part 41 as shown here.

Attach the parts as shown here.

Attach 31 and 32, and make the

reinforcing beams.

After gluing 28 and 29 together, attach the

reinforcing beams as shown.

Attach the parts as shown

here.

Curve.

Curve.

Canon Inc.http://www.canon.com/c-park/

PAGE 04

Grand piano: Assembly Instructions

B Making the fallboard.

Hiroshi Chiba / PAPERART-C

8/12/2019 Grand-piano 01 i e a4

5/7

C Making the backbottom and keys.

Attach the reinforcing beams as

shown here.

Attach the parts as shown here.

Attach the reinforcing beam 46 to back

side of 45 as shown here.

Attach.

Cut out the black keys

one at a time and attach

them.

* This step can be omitted.

Attach the parts as shown

here.

Canon Inc.http://www.canon.com/c-park/

PAGE 05

Grand piano: Assembly Instructions

A figure of completion of the

fallboard.

Fallboard(face)

Fallboard(back)

Hiroshi Chiba / PAPERART-C

8/12/2019 Grand-piano 01 i e a4

6/7

Attach 62 to the parts

made in 36.

E Making the console and legs.

D Put the parts together to assemble the body.

Assemble the parts as shown here.

Assemble the parts as

shown here.

Assemble the parts as shown here.

Assemble the parts as shown here.

Assemble the parts as

shown here.

Slot the fallboard in without

applying glue.

Assemble the parts as

shown here.

Assemble the parts

as shown here.

Attach the

reinforcing beams.

Assemble the parts as shown here.

Attach the reinforcing beams

to the parts made in 37.

Glue parts.

* Make three of these.

* Make three of these.

Attach the parts as shown here.

Assemble the parts as shown here.

* Make three

of these.

Canon Inc.http://www.canon.com/c-park/

PAGE 06

Grand piano: Assembly Instructions Hiroshi Chiba / PAPERART-C

8/12/2019 Grand-piano 01 i e a4

7/7

Attach the parts 82, 83. Attach the parts 84, 85.

Attach the parts.

Attach the reinforcing beams 73 to back side

of 72 as shown here, and assemble the

parts.

Assemble the parts as shown here.

Attach the reinforcing beams 75, 76 to backside of 74 as shown here, and assemble the

parts.

Assemble the parts as shown here.

Assemble the parts as shown here.

Assemble the parts as shown here.

View from above.

View from underneath.

Make three of these. Make two of these.

Assemble the parts as shown here.

Attach the back

sides together.

Canon Inc.http://www.canon.com/c-park/

PAGE 07

Grand piano: Assembly Instructions

F Making the pedals.

Hiroshi Chiba / PAPERART-C