- Designed for Faster Polishing - Granite, Dark Color Stone
- Flexible Pads
- Extraordinary Finish, Fast Polishing
- Step 1 Wet Dry, Rest Steps Wet Application
- Excellent Polish on Dark or Light Color Granite, Quartz, Quartzite
- Available Size - 4”
- Available Steps - Step 1, 2, 3, 4
- Available as Set, or Individual Steps
Diamond Polishing Pads, 4 Step - Series Ultra G
Granite, Hard Stones - 4 StepsGr
anite
, Har
d Sto
nes -
4 St
eps
For Distribution Contact Us : [email protected]
MPN Model Description UPCDPPW04ULTG01044P PPW105Z 4” 4 Step Pads Set 841674120256
WET/DRY
- Designed for Granite Polishing
- Extreme Flexible
- Extraordinary Finish, Fast Polishing
- Wet Application
- Works Good on Dark Color Quartz, Stones as Well
MADE IN KOREA
- Available Size - 4”
- Available Steps - Step 1, 2, 3
- Available as Set, or Individual Steps
Diamond Polishing Pads, 3 Step Wet - Series Ultra G
Gran
ite, D
ark Q
uartz
- 3 St
eps
Granite, Dark Quartz - 3 Steps
MPN Model Description UPCDPPW04ULTG01033P PPW101Z 4” 3 Step Pads Set 841674119571DPPW04ULTGPOS11P PPW102Z 4” Pad Step 1 841674119588
WET
3
- Designed for Granite, Quartz, Hard Stones
- For Edge, Surface and Floor Polishing
- Very Flexible Pads
- Wet Application
- Works Good on Marble as Well
- Available Size - 4”
- Available Grit - 30, 50, 100, 200, 400, 500, 800, 1000, 1500, 3000, Buff
- Available as Set, or Individual Grits
Diamond Polishing Pads, 7 Step Wet - Series Super G
MPN Model Description UPCDPPW04SPRG503K7P PPW112S 4” Set of 7 Pads 841674119809DPPW04SPRG050G1P PPW102S 4” Grit 50 Pad 841674119700
For Distribution Contact Us : [email protected]
Gran
ite, Q
uartz
, Har
d Sto
ne
Granite, Quartz, Hard Stone
- Designed for Granite, Dark Color Quartz, Hard Stones
- For Edge, Surface and Floor Polishing
- Flexible Pads
- Wet Application
- Works Good on Marble as Well
- Available Size - 3”, 4”, 5”, 7”
- Available Grit - 30, 50, 100, 200, 400, 500, 800, 1000, 1500, 3000, Buff
- Available as Set, or Individual Grits
Diamond Polishing Pads, Series Ultra D
MPN Model Description UPCDPPW04ULTD503K7P PPW115X 4” Set of 7 Pads 841674115382DPPW04ULTD50BB8P PPW116X 4” Set of 8 Pads 841674115399DPPW05ULTD503K7P PPW140X 5” Set of 7 Pads 841674115641DPPW07ULTD503K7P PPW166X 7” Set of 7 Pads 841674115900
Granite, Dark Quartz, Hard StoneGr
anite
, Dar
k Qua
rtz, H
ard S
tone
WET
WET
- Designed for Granite
- Great for Onsite Use, Best Result When Used with Spray of Water
- Dry Or Wet (Hybrid) Application
- Very Flexible
- Works Good on Quartz, Marble
- Available Size - 4”, 5”
- Available Steps - Step 1, 2, 3
- Available as Set, or Individual Steps
Diamond Polishing Pads, 3 Step Wet Dry - Series Super G
Granite, Quartz, Marble
Diamond Polishing Pads, 7 Step Dry - Series Super A
For Distribution Contact Us : [email protected]
MPN Model Description UPCDPPH04SPRG01033P PPPH101S 4” 3 Step Pads Set 841674117812DPPH05SPRG01033P PPH106S 5” 3 Step Pads Set 841674119489
Granite, Marble, Travertine
Gran
ite, M
arbl
e, Tr
aver
tine
Gran
ite, Q
uartz
, Mar
ble
WET/DRY
- Designed for Granite
- Great for Onsite Use
- Dry Application
- Very Little Flexible
- Works Good on Marble, Travertine Polishing
- Available Size - 3”, 4”, 5”
- Available Grit - 30, 50, 100, 150, 200, 400, 500, 800, 1500, 3000, Buff
- Available as Set, or Individual Grits
MPN Model Description UPCDPPD03SPRA503K7P PPD164K 3” Set of 7 Pads 841674101484DPPD04SPRA508H5P PPD117K 4” Set of 5 Pads 841674101019DPPD04SPRA503K7P PPD114K 4” Set of 7 Pads 841674100982DPPD05SPRA503K7P PPD140K 5” Set of 7 Pads 841674101248
DRY
5
Concrete Floor Polishing
- Designed for Quartz Polish
- Extreme Flexible White Pads
- Extraordinary Finish, Fast Polishing
- Wet Application
- Works Good on Color Quartz, Light Color Stones
MADE IN KOREA
- Available Size - 4”
- Available Steps - Step 1, 2, 3
- Available as Set, or Individual Steps
Diamond Polishing Pads, 3 Step Wet - Series Ultra Q
- Designed for Quartz Polish
- Wet Application
- Very Flexible
- Works Good on Marble and Granite
- Available Size - 4”
- Available Steps - Step 1, 2, 3
- Available as Set, or Individual Steps
Diamond Polishing Pads, 3 Step Wet - Series Super Q
MPN Model Description UPCDPPW04ULTQ01033P PPW101R 4” 3 Step Pads Set 841674119120DPPW04ULTQPOS11P PPW102R 4” Pad Step 1 841674119137
MPN Model Description UPCDPPW04SPRQ01033P PPW101T 4” 3 Step Pads Set 841674119250DPPW05SPRQ01033P PPW106T 5” 3 Step Pads Set 841674119526
For Distribution Contact Us : [email protected]
Quartz, Marble, Granite
Quartz, Marble, Granite
Quar
tz, M
arbl
e, Gr
anite
Quar
tz, M
arbl
e, Gr
anite
WET
WET
All Purpose Pads
MPN Model Description UPCDPPW04SPRQ503K7P PPW118T 4” 7 Step Pads Set 841674121437
For Distribution Contact Us : [email protected]
All P
urpo
se Pa
ds
Diamond Polishing Pads, 7 Step Wet - Series Standard J
Quartz, Marble
- Designed for Quartz Polish
- Use for Quartz, Marble, Light Color Stone Wet Polish - Wet Application
- Very Flexible
- Available Size - 4”
- Avaialble Grits - Grit 50, 100, 200, 400, 800, 1500, 3000
- Avaialble as Set, or Individual Grits
- All Purpose Aggressive White Pads
- Semi-Flexible resin bond diamond pads with Velcro Backing.
- Available Size - 4 Inch, 5 Inch
- Available Grit - 30, 50, 100, 150, 200, 400, 500, 800, 1500, 3000, 6000, 8000
- Available as
- Set of 5 Pads, Set of 7 Pads, Set of 8 Pads
- Individual Grits
Diamond Polishing Pads, 7 StepWet - Series Super Q
Quar
tz, M
arbl
e
WET
MPN Model Description UPCDPPW04STDJ503K7P PPW170D 4” Set of 7 Pads 841674107950DPPW04STDJ506K8P PPW171D 4” Set of 8 Pads 841674107967 DPPW05STDJ503K7P PPW226D 5” Set of 7 Pads 841674108513DPPW05STDJ506K8P PPW227D 5” Set of 8 Pads 841674108520
WET
7
For Distribution Contact Us : [email protected]
All Purpose PadsAl
l Pur
pose
Pads
- All Purpose Aggressive Colored Pads
- Semi-Flexible resin bond diamond pads with Velcro Backing.
- Available Size - 3 Inch, 4 Inch, 5 Inch, 6 Inch
- Available Grit - 30, 50, 100, 150, 200, 400, 500, 800, 1500, 3000, 6000, 8000
- Available as
- Set of 5 Pads, Set of 7 Pads, Set of 8 Pads
- Individual Grits
Diamond Polishing Pads, 7 Step Wet - Series Standard A
Chip
Free
- Fas
ter
Diamond Saw Blade, SeriesStandard G
MPN Model Description UPCDSBD05STDG08201P SBD103C 5” Saw Blade 841674116419DSBD06STDG08201P SBD104C 6” Saw Blade 841674116426
- Designed for Granite Cutting
- Dry Cutting
- Turbo Continuous
- Chip Free Fine Cutting
- Usage - Granite, Quartz
- Available Sizes - 4”, 4.5”, 5”, 6”
Granite Cutting
DRY
MPN Model Description UPCDPPW03STDA503K7P PPW111A 3” Set of 7 Pads 841674103433DPPW04STDA503K7P PPW194A 4” Set of 7 Pads 841674104263 DPPW05STDA503K7P PPW281A 5” Set of 7 Pads 841674105130DPPW06STDA503K7P PPW306A 6” Set of 7 Pads 841674105383
WET
For Distribution Contact Us : [email protected]
Granite, Hard Stone CuttingCh
ip Fr
ee - H
ard S
tone
- Designed for Granite & Harder Stone Cutting
- Dry Cutting
- Turbo Continuous
- Chip Free Fine Cutting
- Usage - Granite, Hard Stones, Quartzite
- Available Sizes - 4”, 4.5”, 5”, 6””
Diamond Saw Blade, SeriesSuper G
MPN Model Description UPCDSBD05SPRG08201P SBD103S 5” Saw Blade 841674118383DSBD06SPRG08201P SBD104S 6” Saw Blade 841674118390
DRY
Chip
Free
- Qua
rtz Gr
anite
Diamond Saw Blade, SeriesStandard A
MPN Model Description UPCDSBD05STDA10201P SBD103A 5” Saw Blade 841674121499DSBD06STDA10201P SBD104A 6” Saw Blade 841674121505
- Designed for Quartz & Granite Cutting
- Dry Cutting
- Turbo Continuous 10 MM Segments
- Chip Free Fine Cutting
- Usage - Quartz, Granite
- Available Sizes - 4”, 4.5”, 5”, 6”
Quartz, Granite Cutting
DRY
9
Stone Flush Cutting
MPN Model Description UPCDSBD45ULTA10781P SBD102U 4.5” Saw Blade 841674120201DSBD05ULTA10781P SBD103U 5” Saw Blade 841674120218
For Distribution Contact Us : [email protected]
Ston
e Flu
sh Cu
tting
- Flush Cut for Edges
- Connect to Saw Blades
Saw Blade Flush Adpater, Series Super A
MPN Model Description UPCFLAL05SPRA00581P AFB101K Flush Cut Adapter 841674119649
Quartzite, Granite, Quartz
- Designed for Quartzite & Hard Stone Cutting
- Dry Cutting
- Turbo Continuous Segments
- Super Fine Cutting
- Fast Cutting Speed
- Usage - Quartzite, Granite, Hard Stones
- Available Sizes - 4.5”, 5”, 6”
Diamond Saw Blade, SeriesUltra A
DRY
Quar
tzite
, Gra
nite
, Qua
rtz
WET/DRY
For Distribution Contact Us : [email protected]
- Designed for Granite & Hard Stone Countertop Edge, Surface Grinding
- Resin Filled T-Seg Circle Continuous Cup Grinding Wheel for Effortless Smooth Grinding
- Super Fast Aggressive Grinding & Stock Removal
- Dry or Wet Grinding
- Grits - Coarse, Medium, Fine
- 5/8” 11 Threaded Arbor
- Usage - Granite, Hard Stones, Quartzite, Concrete, Marble
- Available Size - 4”, 5”, 6”, 7”
- Available as Set, or Individual Grits
Diamond Cup Wheel SeriesUltra A Granite Hard Stone Grinding
MPN Model Description UPCDCWD04ULTARC581P CWD101U 4” Coarse Wheel 841674121529DCWD04ULTARM581P CWD102U 4” Medium Wheel 841674121536
Gran
ite Ha
rd St
one G
rindi
ngSi
zes :
4”, 5
”
- Designed for Granite Countertop Edge, Surface Grinding
- Resin Filled Turbo Continuous Cup Grinding Wheel for Effortless Smooth Grinding
- Faster Grinding & Stock Removal, Dry or Wet Grinding
- Grits - Coarse, Medium, Fine
- 5/8” 11 Threaded Arbor
- Usage - Granite, Marble
- Available Size - 4”, 5”
- Available as Set, or Individual Grits
Diamond Cup Wheel Series Super A
MPN Model Description UPCDCWD04SPRARC581P CWD118K 4” Coarse Wheel 841674116242DCWD04SPRARM581P CWD119K 4” Medium Wheel 841674116259 DCWD04SPRARF581P CWD120K 4” Fine Wheel 841674116266
Stone Concrete Grinding
WET/DRY
WET/DRY
11
For Distribution Contact Us : [email protected]
Granite Stone Grinding
- Designed for Granite Stone Countertop Edge, Surface Grinding
-Turbo Cup Grinding Wheel for aggressive Grinding
- Dry or Wet Grinding
- 5/8” 11 Threaded Arbor
- Usage - Granite, Hard Stones, Concrete, Marble
- Available Size - 4”, 5”, 6”, 7”
- Available as Individual Grits
Diamond Cup Wheel SeriesSuper C
MPN Model Description UPCDCWD04SPRCTB581P CWD105N 4” Cup Wheel 841674116150DCWD05SPRCTB581P CWD106N 5” Cup Wheel 841674116167
Gran
ite St
one G
rindi
ng
- Designed for Quartzite & Hard Stone Countertop Edge, Surface Grinding
- Resin Filled T-Seg Circle Continuous Cup Grinding Wheel for Effortless Smooth Grinding
- Extremely Faster Grinding & Stock Removal
- Dry or Wet Grinding
- Grits - Coarse, Medium, Fine
- 5/8” 11 Threaded Arbor
- Usage - Quartzite, Hard Stones, Granite, Concrete
MADE IN KOREA
- Available Size - 4”
- Available as Set, or Individual Grits
Diamond Cup Wheel SeriesUltra G Quartzite Granite Grinding
MPN Model Description UPCDCWD04ULTGRC581P CWD101Z 4” Coarse Cup wheel 841674120324DCWD04ULTGRM581P CWD102Z 4” Medium Cup Wheel 841674120331
Quar
tzite
Gran
ite Gr
indi
ng
WET/DRY
WET/DRY
For Distribution Contact Us : [email protected]
Diamond Cup Wheel SeriesStandard A
All Purpose GrindingAl
l Pur
pose
Grin
ding
MPN Model Description UPCDCWD04STDATB581P CWD101A 4” Cup Wheel 841674116020DCWD05STDATB581P CWD102A 5” Cup Wheel 841674116037
- All Purpose Granite Stone Countertop Edge, Surface Grinding
-Turbo Cup Grinding Wheel for aggressive Grinding
- Dry or Wet Grinding
- 5/8” 11 Threaded Arbor
- Usage - Granite, Hard Stones, Concrete, Marble
- Available Size - 4”, 5”, 6”
- Available as Individual Grits
MPN Model Description UPC
WET/DRY
Stone Leathering BrushesDiamond Leathering Brushes
Series Super A
Ston
e Let
herin
g
- Designed for Granite Leathering
- Dual Connector Snail Lock and 5/8” 11
- Available Grit - 36, 46, 60, 80, 120, 180, 240, 320, 500
13
For Distribution Contact Us : [email protected]
Dust Shroud
- 7” Dust Shroud for Grinder
- Connects to Known Brand 7” Grinders
- Vacuum Connector
- Optimal Flexible Body for Easy Handling
Dust Shroud for Grinder, Series Standard A
MPN Model Description UPCGDSR07STDA00031P DSD102A 7” Dust Shroud 841674115207
Size
: 7”
- Stadea 5 inch all metal dust shroud for improved durability
- Metal construction 1 1/4” diameter extra long vacuum connector for optimal surface dust suction efficiency
- Adjustable velcro strip for easy and quick dust shroud height adjustment
- One hand collar lock for quick lock and release
- Maximum collar size - 1 13/16”
Metal Dust Shroud, SeriesStandard A Dust Shroud
MPN Model Description UPCGDSD05STDA00021P DSD101A 5” Dust Shroud 00841674115191
Size
s : 5
”
For Distribution Contact Us : [email protected]
- Designed for Hard Stone Quartzite, Granite Cutting
- Silent Core Bridge Saw Blade
- Chipfree Straignt and Miter Bevel Cuts
- 20 MM Segment
- Long Life
MADE IN KOREA
- Available Size - 14”, 16”, 18”
Bridge Saw Blade, Series Ultra A Quatzite, Granite
MPN Model Description UPCDBBW14ULTA20601P BBW101U 14” Bridge Saw Blade 841674120294DBBW16ULTA20601P BBW102U 16” Bridge Saw Blade 841674120300DBBW18ULTA20601P BBW103U 18” Bridge Saw Blade 841674120317
Quat
zite,
Gran
ite
WET
- Designed for Cut Hard Stone, Quartzite, Granite
- Internal and External Support
- Slot for Easy Pop the Core
MADE IN KOREA
- Available Size - 1 1/4”, 1 3/8”, 1 1/2”
Diamond Core Bit, Series Ultra A Granite Quartzite Hard Stones
MPN Model Description UPCDCBD32ULTA00581P CBD105U 32 MM (1 1/4”) Bit 841674119182DCBD35ULTA00581P CBD106U 35 MM (1 3/8”) Bit 841674120270DCBD38ULTA00581P CBD107U 38 MM (1 1/2”) Bit 841674120287
WET/DRY
Gran
ite Qu
artzi
te Ha
rd St
ones
15
- Desgined for Stone Edge Profile Using Hand Grinder Polisher
- Top Guide to Control Profile Movement
- Internal Water Hole
- Vacuum Brazed Diamond for Aggressive Cutting
- 5/8” 11 Female Threaded
- Available Sizes - 3/8” (10 MM), 9/16” (15 MM), 3/4” (20 MM), 1” (25 MM), 1 1/4” (30 MM), 1 1/2” (40 MM)
- Available Shapes - Full Bullnose, Bevel, Demi, Ogee, Pencil, Cove
Diamond Profile WheelsSeries Super A
Stone Profiling, Concrete Profiling
Demi Bevel
Full BullnoseOgee
• 05MM(B5)• 10MM(B10)• 15MM(B15)• 20MM(B20)• 25MM(B25)• 30MM(B30)• 40MM(B40)
• 05MM(E5)• 10MM(E10)• 15MM(E15)• 20MM(E20)• 25MM(E25)• 30MM(E30)• 40MM(E40)
• 20MM(V20)• 25MM(V25)• 30MM(V30)• 40MM(V40)
• 20MM(F20)• 25MM(F25)• 30MM(F30)• 40MM(F40)St
one P
rofil
ing,
Conc
rete
Profi
ling
MPN Model Description UPCDPWW10SPRA1B581P PWW102K 3/8” Demi Profile Wheel 841674100425DPWW30SPRA1F581P PWW121K 1 ¼ Ogee Profile Wheel 841674100616DPWW25SPRA1V581P PWW116K 1” Full Bullnose Profile Wheel 841674100562DPWW40SPRA1V581P PWW118K 1 1/2 “ Full Bullnose Profile Wheel 841674100586
For Distribution Contact Us : [email protected]
WET/DRY
- Designed for Stone Edge Shaping Profiling on Routers
- Sintered Diamond Bit, Metal Bond
- Wet or Dry Application
- M8 or M10 Threaded
- Available Sizes - 3/8” (10 MM), 9/16” (15 MM), 3/4” (20 MM), 1” (25 MM), 1 1/4” (30 MM), 1 1/2” (40 MM)
- Available Shapes - Demi, Full Bullnose, Bevel
Diamond Router BitsSeries Super A
Stone
Demi Bevel Full Bullnose• 10MM(E10)• 15MM(E15)• 20MM(E20)• 25MM(E25)• 30MM(E30)• 40MM(E40)
• 10MM(B10)• 15MM(B15)• 20MM(B20)• 25MM(B25)• 30MM(B30)• 40MM(B40)
• 20MM(V20)• 25MM(V25)• 30MM(V30)• 40MM(V40)
Ston
e
MPN Model Description UPCDRBW40SPRA2V801P RBW129K 1 ½” Full Bullnose 841674113746DRBW30SPRA2V801P RBW127K 1 ¼” Full Bullnose 841674113722DRBW20SPRA2E801P RBW114K 3/4” Bevel 841674113593DRBW10SPRA2B801P RBW101K 3/8” Demi 841674113463
17
For Distribution Contact Us : [email protected]
Snail Lock Backing PadSeries Super A
Snail Lock Adapter - Edge PolishingSn
ail L
ock A
dapt
er -
Edge
Polis
hing
Ston
e Edg
e Pol
ishin
g - In
line M
achi
nes
MPN Model Description UPCBRAL04SPRASA581P ASA101K 4” Snail Lock Pad 841674119618BRAL05SPRASA581P ASA102K 5” Snail Lock Pad 841674119625
Snail Lock Polishing PadSeries Super A Stone Edge Polishing - Inline Machines
- Designed to Polish Straight Edge Polish on Inline Machines
- Twist & Lock Quick Pad Change
- Wet or Dry Polishing, with Central Water Hole
- Rigid Aluminium Snail Lock, Rubber Backing Pad
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- For inline Machines, Grinders Polishers
- Available Size - 4”, 5”
MPN Model Description UPCDPSW05SPRA050G1P PSW101K 5” Grit 50 Pad 841674120355DPSW05SPRA100G1P PSW102K 5” Grit 100 Pad 841674120362DPSW05SPRA200G1P PSW103K 5” Grit 200 Pad 841674120379
- Designed for Single Pass Inline Flat Edge Polishing
- Granite, Quartz, Marble Polishing
- Snail Lock Connection, Quick Change
- 10 MM Thick Resin Polishing Pads
- Wet Application
- Available Size - 5”
- Available Grit - 50, 100, 200, 400, 800, 1500, 3000
- Available as Set, or Individual Grits
WET/DRY
WET
For Distribution Contact Us : [email protected]
- Designed for Single Pass Inline Flat Granite Edge Polishing
- Usage - Granite, Dark Color Stones & Quartz Polishing
- Snail Lock Connection, Quick Change
- 6 MM Thick Resin Polishing Pads
- Wet Application
- Available Size - 5”
- Available Grit - 50, 100, 200, 400, 800, 1500, 3000
- Available as Set, or Individual Grits
Snail Lock Polishing Pad, Series Super G Stone Edge Polishing - Inline Machines
Ston
e Edg
e Pol
ishin
g - In
line M
achi
nes
MPN Model Description UPC
MPN Model Description UPC
- Designed for Sink Edge Round over Stone Chip free Grinding Shaping
- Zero Tolerance Resin-Filled for Chip Free aggressive Grinding
- Internal Water Hole for Cust-Free Grinding
- Controlled Cutting and Shaping of Stones
- 5/8” 11 Female Threaded Arbor
- Available Sizes - 2”, 3”
Diamond Drum Wheel -Series Ultra A Stone Sink Edge Grinding Shaping
Ston
e Sin
k Edg
e Grin
ding
Shap
ing
WET
WET/DRY
19
- Designed for Sink Edge Roundover Stone Grinding Shaping
- Controlled Cutting and Shaping of Stones
- Vacuum Brazed Diamond, Very Aggressive
- 5/8” 11 Female Threaded Arbor
- Available Sizes - 2”, 3”
Diamond Drum WheelSeries Super A Stone Sink Edge Grinding Shaping
Ston
e Sin
k Edg
e Grin
ding
Shap
ing
MPN Model Description UPCDDWW02SPRA21581P DWW101K 2” Drum Wheel 841674100333DDWW03SPRA21581P DWW102K 3” Drum Wheel 841674100340DDWW02STDA21581P DWW101A 2” Drum Wheel 841674100319DDWW03STDA21581P DWW102A 3” Drum Wheel 841674100326
WET/DRY
For Distribution Contact Us : [email protected]
Rubber Backing Pad Flexible, Series Standard A Countertop Edges
Size
s : 2”
, 3”, 4
”, 5”, 6
”
MPN Model Description UPCBRRB03STDA00581P RBP101A 3” Rubber Pads 841674113173BRRB04STDA00581P RBP102A 4”Rubber Pads 841674113180BRRB05STDA00581P RBP103A 5” Rubber Pads 841674113197BRRB06STDA00581P RBP104A 6” Rubber Pads 841674113203
- Designed for Countertop Edge Polishing
- Semi Flex Rubber Backing Pad, Brass Arbor
- Wet or Dry Polishing, with Water Hole
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
- Available Size - 2”, 3”, 4”, 5”, 6”
For Distribution Contact Us : [email protected]
- Designed for Tight Corner Edge Polishing
- Extra Flex Rubber Backing Pad, Brass Arbor
- Wet or Dry Polishing, with Water Hole
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
- Available Size - 4”
Extra Flex Rubber Backing Pad, Series Standard F Tight Corner, Edges
Ogee Bullnose
- Extreme Flex Rubber Backing Pad, Brass Arbor
- Ogee Bullnose Polishing
- Wet or Dry Polishing, with Water Hole
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
- Available Size - 4”
Rubber Backing Pad Extreme Flexible, Series Super F
Size
: 4”
Size
: 4”
MPN Model Description UPCBRRB04STDF00581P RBP101P 4” Extra Flex Pad 841674116884
MPN Model Description UPCBRRB04SPRF00581P RBP103K 4” Extreme Flexible Pad 841674116891
21
For Distribution Contact Us : [email protected]
- Designed for Flat Surface, Countertop, Floor Polishing
- Rigid Bakelite Backing Pad, Brass Arbor
- Wet or Dry Polishing, with Water Hole
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
- Available Size - 4”
Bakelite Backing Pad, Series Super R
Surface Polishing
MPN Model Description UPCBRBK04STDR00581P RBK101F 4” Rigid Bakelite Pad 841674119182
Size
- 4”, 5
”
Surface, Floor PolishingRubber Backing Pad Rigid, Se-
ries Standard R
Size
- 4”, 5
”
- Designed for Flat Surface, Countertop, Floor Polishing
- Rigid Rubber Backing Pad, Brass Arbor
- Wet or Dry Polishing, with Water Hole
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
- Available Size - 4”, 5”
MPN Model Description UPCBRRB04STDR00581P RBP102F 4” Rigid Pad 841674113265BRRB05STDR00581P RBP103F 5” Rigid Pad 841674113272
For Distribution Contact Us : [email protected]
Surface, Floor PolishingAluminum Backing Pad, Series Super R
Size
- 3”, 4
”, 5”, 6
”, 7”
- Designed for Flat Surface, Countertop, Floor Polishing
- Rigid Aluminum Backing Pad, Brass Arbor
- Wet or Dry Polishing, with Water Hole
- Velcro Backed for Non-Slip Grip
- Floor or Counter Polishing
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
- Available Size - 3”, 4”, 5”, 6”, 7”
MPN Model Description UPCBRAL03SPRR00581P ABP101Q 3” Aluminum Pad 841674118871BRAL04SPRR00581P ABP102Q 4” Aluminum Pad 841674118888 BRAL05SPRR00581P ABP103Q 5” Aluminum Pad 841674118895BRAL06SPRR00581P ABP104Q 6" Aluminum Pad 841674118901BRAL07SPRR00581P ABP105Q 7" Aluminum Pad 841674118918
Stone Sink Edge Polishing
- Designed for Oval, Round Surface and Corner Polishing
- Rigid Convex Rubber Backing for Stadea Convex Pads
- Sink Edge Polishing
- Brass Arbor
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
Backing Pad, Convex, SeriesStandard A
Size
s : 4”
MPN Model Description UPCBRCV04STDA00581P RCP101A 4” Rubber Pad 841674115153
23
For Distribution Contact Us : [email protected]
Stone Sink Edge Polishing Pad
- Designed for Oval, Round Surface and Corner
- For Stone Wet or Dry Polishiing
- Convex Pads
- Fast Polishing
- Exellent Polish on Dark or Light Color Granite, Quartz, Quartzite
- Available Size - 4”
- Available Grits - 50, 100, 200, 400, 800, 1500, 3000
- Available as Set, or Individual Grits
Diamond Convex Polishing Pad, Series Standard A
WET/DRY
Ston
e Sin
k Edg
e Pol
ishin
g
MPN Model Description UPCDCPW04STDA503K7P PCW112A 4” Set of 7 Pads 841674115122DCPW04STDA050G1P PCW101A 4” Grit 50 Pad 841674115016DCPW04STDA100G1P PCW102A 4” Grit 100 Pad 841674115023
- Designed for Oval, Round Surface and Corner Polishing
- Rigid Convex Rubber Backing for Stadea Convex Pads
- Sink Edge Polishing
- Brass Arbor with Water Hole
- Velcro Backed for Non-Slip Grip
- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release
- Maximum RPM 5000
Backing Pad, Convex Series Super A
Stone Sink Edge Polishing
Size
4”
MPN Model Description UPCBRCV04SPRA00581P RCP101K 4” Convex Backing Pad 841674121390
MPN Model Description UPCDHPW00SPRA503K5P HPW178K Set of 5 Hand Pads 841674100074DHPW00SPRA503K7P HPW179K Set of 7 Hand Pads 841674100081DHPW00SPRA050G1P HPW101K Grit 50 Hand Pad 841674100005
WET/DRY
For Distribution Contact Us : [email protected]
Stone Sink Edge Polishing PadDiamond Convex Polishing
Pad, Series Super ASt
one S
ink E
dge P
olish
ing - Designed for Oval, Round Surface and Corner
- For Stone Wet or Dry Polishiing
- Convex Pads
- Fast Polishing
- Exellent Polish on Dark or Light Color Granite, Quartz, Quartzite
- Available Size - 4”
- Available Grits - 50, 100, 200, 400, 800, 1500, 3000
- Available as Set, or Individual Grits
MPN Model Description UPCDCPW04SPRA503K7P PCW109K 4” Convex Polishing Pads 841674121369
Stone Sink Edge Polishing
- Designed to Hand Polish Corners, Hard to Reach Areas
- Electroplated Diamond for Quick Polishing of Stone
- Flexible Plush Foam Holder, Squzees Wet Slurry
- Slotted Non-Slip Hand Grip
- Available Grits - 50, 100, 150, 200, 400, 500
- Available as Set, or Individual Grits
Diamond Hand Polishing PadSeries Super A
Ston
e Han
d Pol
ishin
g
WET
25
For Distribution Contact Us : [email protected]
- Flexible Hand Pads Designed for Polish Hard to Reach Areas
- Flexible 3 MM Thick Durable Hand Pads
- Slotted Rubber Backer for Non-Slip Hand Grip
- Available Grits - 50, 100, 200, 400, 800, 1500, 3000
- Available as Set, or Individual Grits
Diamond Hand Polishing PadSeries Standard C Stone Hand Polishing
MPN Model Description UPCDHPWFLSTDC5C3K71 HPW110H Flexible Hand Pad Set 841674121161
Ston
e Han
d Pol
ishin
g
Stone Edge Grinding ShapingCNC Finger Bit, Series Super A
Ston
e Edg
e Grin
ding
Shap
ing
- Designed for Granite Quartz Grinding and Shaping
- Aggressive and Durable
- 1/2” Gas Connection
MPN Model Description UPC
WET
CNC Diamond Router Bits- 7 Step Set Series Super A
Stone Edge Profiling and PolishingSt
one E
dge P
rofil
ing a
nd Po
lishi
ng
- Designed for Granite, Quartz, Quartzite Shaping and Polishing
- 7 Step CNC Router Bit to Shape and High Gloss Finish Counter Edges
- Aggressive and Durable
- Available in Various Shapes and Sizes
T30 - R3
T40 - R3
T30 - R6
T40 - R6
MPN Model Description UPC
- Metal - Grit 50, 100, 200
- Resin - Grit 400, 800, 1500, 3000
- Metal - Grit 50, 100, 200
- Resin - Grit 400, 800, 1500, 3000
- Metal - Grit 50, 100, 200
- Resin - Grit 400, 800, 1500, 3000
- Metal - Grit 50, 100, 200
- Resin - Grit 400, 800, 1500, 3000
For Distribution Contact Us : [email protected]
These features ease polishing process and enhance the polishing performance.
Improved grip-size out-of-core ergonomic back handle design minimizes back hand fatigue during usage. New comfortable back hand grip design differs from classic oversize main body hand-grip across air vents. It eliminates air-vent hand blockage improving
ElectricalSafety
GFCI - Cuts off electricity in case of hazardous electrical shock/ground beyond a threshold
Double Insulation – For enhanced electrical safety
EaseOfUse
Under Water Feed – Minimizes polishing interference Water Pressure Control & Water Stopper right from the polisher
In-built water connector to quick connect with standard water hose
Three-hole water sprayer for even distribution required for polishing, grinding, coring, profiling process, unclogs cut particles
Water Splash Guard - Splash guard to stop water spill on polisher and user, Vacuum connector minimizes dust during dry polishing
Arbor Lock Button - For tool free release of backing pads, profile wheels, core bits, grinding wheels from the polisher arbor
Power Lock Switch - One push lock for effortless continuous run
Variable Speed Dial – Adjusts speed to an specific application for specific stone, and wet or dry polishing process
Ergonomic designed handle – For comfortable grip and best polishing performance
Dual Front Handle – Top D-Handle for stone fabrication, Side handle for general purpose work
Ambidextrous Side Handle – Side handle for left or right handed use
Long Power Cord, Long Water Line – For easy access to all part of countertops
Supports up to 5” Pads – Compatible for smaller 3”, 4” and up to 5” tools
Soft Start – For comfortable feel & 5/8” 11 Arbor
Stone Wet PolisherSeries Super A Concrete Wet Polisher
SWPW05SPRA00581P SWP101K 5” Wet StonePolisher 841674114019
Ston
e Con
cret
e Wet
Polis
hing
, Cor
ing,
Profi
ling
Model DescriptionMPN UPC
The Stadea SWP101K, 5 Inch DTM+ Wet Stone Polisher for concrete countertop stone fabrication designed for ease of use, power, control and durability. DesignedForExcellence
Features robust DTM+ motor gear system to ensure the optimal speed and power needed for stone wet or dry polishing, fabrication and wide range of use cases from stone concrete profiling, grinding, coring to general purpose usage.
Head Heavy Polisher Design and out-of-core back-handle design minimizes back hand work fatigue and increase pressure on polishing surface of granite concrete etc.
For Distribution Contact Us : [email protected]