Green Light Cat 2011

www.ridgeons.co.uk

GREEN LIGHTYOUR NO-NONSENSE TRADE GUIDE TO

SUSTAINABLE BUILDING

sustain

able p

roducts

We help you understand and comply with

The Code forSustainable Homes and

Modern Methods of Construction

ince the introduction of The Code for Sustainable Homes back in

April 2007, it’s fair to say it’s caused some confusion and frustration in our

industry. At Ridgeons, we’ve worked hard to understand the Code so that we

can offer the best possible service and advice to our customers. This is why we’ve

produced Green Light, to tell you just what you need to know to comply.

For architects, contractors, developers and builders, the issue of sustainability is here to stay.

Whether you’re improving existing housing stock or responsible for new builds, this is your

no-nonsense, simple to use guide to sustainable building. You’ll find products that will help you to

make new and existing homes more efficient.

We’ve gone further than any other merchant in understanding this legislation, and we’ve done it

to give you the best possible help and advice.

If you would like to know more about what we can do to help, give us a call or arrange a site visit

from one of our Eco Champions. And remember, the earlier we get involved in your project, the

more we can do to help.

Dave JordanBusiness Development ManagerLicenced BREEAM Assessor (Code for Sustainable Homes)

The Code for Sustainable Homes has changed the way our

industry works. It is the new benchmark for all new-build

homes and simply has to be adhered to. This guide has been

produced to explain the Code to you in a way

you want to hear it, by explaining how to

comply and to offer product solutions to get

your project approved.

Why do you need the Green Light?

GET THE GREEN LIGHT

www.ridgeons.co.uk

JARGONBUSTED!There is so much new terminology

associated with sustainable

building, so in Green Light you’ll

find our Busted logo. This is where

we explain these new-fangled

sayings succinctly. Simply telling

you what you need to know.

? !*# Energy

Water

Building materials

Surface water run off

Waste

FOR YOUR DEVELOPMENT

Sustainable building –exposed and explainedIn this guide we explore differentsections of the home, new buildsand existing, to give you clear and practical advice on how to achieve a more sustainabledevelopment.

p 10 - 109

p 110 - 143

p 144 - 175

p 176 - 193

p 194 - 201

Ridgeons can supply all the building products required to make environmentallycompliant work easy. Not only that, but through our team of SustainableChampions, Eco Centres and extensive range of specially selected products, wecan help and advise on everything relating to environmentally friendly,compliant building practice too.

CHAMPIONINGSUSTAINABILITY

Kevin EagleSpecialist Representative

Kevin has worked for Ridgeons for

over 23 years as a Plumbing &

Heating specialist. During the last

3 years Kevin has attended various

training courses and has gained an

extensive knowledge of

Sustainable building techniques

and products.

Dave JordanBusiness Development Manager

Licenced BREEAM Assessor

(Code for Sustainable Homes)

Dave heads up the team and is an

acknowledged industry expert on

sustainable building techniques

and products.

Mark HardySpecialist Representative

Mark joined Ridgeons 3 years ago

as Plumbing & Heating specialist.

During the last 3 years Mark has

attended various training courses

and has gained an extensive

knowledge of Sustainable building

techniques and products.

At the forefront of sustainable solutions

The Ridgeons Sustainability team

Ridgeons Sustainability team have extensive expertise in the Code for Sustainable Homes andModern Methods of Construction, so they can help and advise on any project you have – howeverlarge or small. By offering an extensive eco-friendly product range backed up with expertiseRidgeons are your 1st choice for sustainable building projects.

WHOLE HOUSE APPROACHYou could cherry-pick individual energy saving and renewable technologies,but to get the highest savings you need to think about the whole house. No one technology will solve the problem.

Whole House Technologies

FloorInsulation

WallInsulation

Windows&

Doors

CondensingBoiler

GroundSource

Heat Pump

Air SourceHeat Pump

Woodchipboilers

SolarThermal

HeatStores

DHWStorage

UnderfloorHeating

MechanicalVentilation

HeatRecovery

Fanassistedradiators

Normalradiators

Light bulbs A+Appliances

ControlsSolarPV

The whole house approach is quite simple really and can be condensed into ten steps.

1. Insulate and use efficient buildings2. Choose a suitable efficient heat source for your space heating3. Decide if you want solar thermal panels to help your hot water efficiency4. Decide if Solar PV can help5. Choose low-water usage taps and showers, and consider rain-water harvesting or

grey water recycling6. Choose your DHW cylinder to suit the DHW usage o f the house7. Choose the most appropriate heat emitters – UFH, fan assisted radiators or oversized

“normal radiators”8. Get the right controls to make it all work together9. Think about heat recovery systems10. Use energy efficient appliances and products in the building

The guide will help you select products for the whole house approach.

Calculation direction (from the demand to the source)

Energy direction (from the source to the demand)

Primaryenergy

Final energy(boundary/building)

heat demand

Emissions

Distribution Storage Generation

RoofInsulation

Greywaterharvesting

WaterSaving

SanitarywareTaps &Showers

Rainwaterharvesting

Government PlanningThe Government has set out ambitions to tackle a third of the UK’s carbon emissions from housing by 2050.

By 2015 no old homes will lack the basic energy efficient measures.

From 2016 all new homes will be built to a new zero carbon standard.

By 2020 seven million homes will have been upgraded to significantly improve the energyperformance.

By 2050 the nation’s entire housing stock will be virtually zero carbon.

This will require a complete transformation of the housing stock over the coming decades.

The Code for Sustainable Homes - formerly EcoHomes Scheme(The New Build homes version of BREEAM - Launched Apr 2007)

What is the Code for Sustainable HomesQuite simply the Code is a measuring tool for environmental performance

of new build homes, it sits above the current building regulations and is

applied to individual dwellings.

The code has a two stage process

• Design stage (DS) leading to interim certificate

• Post Construction Stage (PCS) leading to final certificate.

The code has mandatory areas.

• Energy, Water, Materials, Waste and Surface water run-off

www.ridgeons.co.uk 06 / 09

What does the Code coverIn total the Code covers nine categories of environmental sustainability as outlined in the

chart above. Credits are assigned to each sub-category area within the main categories and

percentage environmental weightings are applied.

Energy & CO2

Water

Materials

Surface water run-off

Waste

Pollution

Health & Wellbeing

Management

Ecology

37%

9%7%2%

6%

3%

14%

10%

12%

Code Levels Points Equivalent

Level 1 36 EST* Good Practice

Level 2 48

Level 3 57 EST* Best Practice

Level 4 68 PassivHaus and EST* Exemplar

Level 5 84

Level 6 90

BREEAM Scheme (Buildings Reseach Establishment Environmental Assessment Method)BREEAM can be used to assess the environmental performance of any type of building(new and existing).

The code has six target levels. Code 1–3 can be achieved without using renewable butcodes 4–6 will require renewables.

EST* – Energy Saving Trust

ENERGETICRENEWABLESHard working products that save energy and complywith the Code

As energy and CO2consumption account for

37% of the credits that can be achieved in a

new build to comply with the Code for

Sustainable Homes, it’s essential you know

about the products available to achieve the

best rating. Installing energy saving products

into a new build is now standard practice.

Therefore, it pays to get to grips with the

latest technology available and build them in

from the word go.

With tough carbon reduction targets set by

the Government, we’re seeing a rise in

Micro Generation and financial incentives,

including Feed-in Tariffs and Renewable Heat

Initiative. All of this means Micro Generation

Technologies are in demand so you need to

know what products give the best results and

where to get them. This is where we can help.

Our energy section features the latest inenergy efficient and renewable technologies.Get us involved in your project early and wecan work to achieve the best results forenergy efficient homes.

JARGONBUSTED!Micro GenerationsThe generation of zero orlow-carbon heat and power byindividuals, small businesses andcommunities to provide energyfor their own purposes.

? !*#


Energy

Assessment CriteriaGround & Air Source Heat Pumps & Cylinders

Ground Collectors & Thermo PipesMechanical Extraction Ventilation

Hydronic Underfloor HeatingEnergy Efficient Radiators

Thermal StoreSolar Photovoltaic & Thermal Kits

Solar CylindersSolar Controls

Wood & Pellet Burning StovesBiomass Boilers

Low Enery LightingSun Tunnels

12-1314-3940-4142-4546-5354-5556-5758-9192-9596-9798-99

100-103104-107108-109

Building Regulationschanged October 2010

25% Improvement in DER over TER

Part L1A 2010 aims to improve Dwelling emission

rates by 25% over Part L1A 2006.

This corresponds roughly with the trigger point for

Code for Sustainable Homes Level 3, in line

with the government’s strategy for

getting newbuild dwellings to

zero carbon by 2016.

This is a 40% improvement over a

dwelling built to the 2002 regulation

Contents

JARGONBUSTED!Micro Generation TechnologiesSmall scale wind turbines,hydroelectric plants, photovoltaicsolar systems, ground source heatpumps and Micro Combined Heatand Power installations.

? !*#

Solar Photovoltaic

Air Source Heat Pumps

Wood Burning Stove

Ground Collectors

Underfloor Heating

Ground Source Heat Pumps

Mechanical ExtractionVentilation

Solar Thermal

Thermal Store

One aim of the Code for

Sustainable Homes is to limit

emissions of carbon dioxide

(CO2) to the atmosphere arising

from the operation of a dwelling

and its services. Opposite we

detail the assessment criteria and

explain the available credits that

can help you plan towards a

zero carbon development.

MORE THAN JUST

HOT AIRSustainable solutions to reducing carbon dioxide emissions

Issue ID Description No. of credits availableMandatoryElements

Ene 1 Dwelling Emission Rate 10 Yes


Energy

Credits are awarded based on the

percentage improvement in the Dwelling

Emission Rate (DER), (estimated carbon

dioxide emissions in kg per m2 per annum

arising from energy use for heating, hot

water and lighting for the actual dwelling),

over Target Emission Rate (TER) (the

maximum emission rate permitted by

Building Regulations), for the dwelling where

DER and TER are defines in AD L1A 2010

Edition of the Building Regulations. Credits

are awarded in accordance with the table.

Assessment criteria:Energy and CarbonDioxide Emissions

Criteria

% Improvement of DER over TER

CreditsMandatory

Levels

≥ 8%

≥ 16%

≥ 25%

≥ 36%

≥ 47%

≥ 59%

≥ 72%

≥ 85%

≥ 100%

Zero Net CO2

Emissions

1

2

3

4

5

6

7

8

9

10

Level 4

Level 5

Level 6

Default Cases None

Level 1 (�) 0% (Compliance with Part L 2010 only is required)

Level 2 (��) 0% (Compliance with Part L 2010 only is required)

Level 3 (��) 0% (Compliance with Part L 2010 only is required)

Level 4 (��) 25%

Level 5 (��) 100%

Level 6 (��) Net Zero CO2 Emissions

Code Level Minimum Percentage Improvement in Dwelling Emission Rate

over Target Emission Rate

Code Levels for Mandatory Minimum Standards in CO2 Emissions (Ene 1)

GROUND SOURCEHEAT PUMPSHARNESSING

NATURE’S ENERGY

Our environment is full of energy, even at sub-zero temperatures

there is plenty of energy available.

Heat pumps use conventional refrigeration technology to extract

the sun’s energy stored in the environment and raise it to a

temperature suitable for heating purposes. This principle works

even in the middle of winter at temperatures as low as -25ºC.

Energy


Heat Pumps

SourceNational Grid 25%

Heat Pump

CondenserEvaporator

Sourcefrom Air or Ground 75%

100%

1

2

3

4

5

6

RIDGEONS RECOMMENDS

Before selecting a Heat Pump for retrofitting into an existing home youshould check the thermal efficiency ofthe building.

A heat pump heating system consists of 3 components: the

heat source, the heat pump itself and a heat distribution and

storage system.

Heat pumps are able to produce more energy than they

consume by using the conventional refrigeration cycle to

absorb heat from the environment and raise it to a suitable

level for heating.

75% of the energy is taken from the environment i.ethe air or ground and transfered to the heat pump.

25% of the energy is sourced from the national grid inthe normal way of supplying your electricity. This is usedto operate the heat pump but with very low consumption

The energy from the air or ground is transfered to therefrigerant inside the heat pumps evaporator. Thiscauses the temperature of the refrigerant to rise andchange state from liquid to gas.

The refrigerant gas is then compressed, using anelectrically driven compressor, reducing its volume butcausing its temperature to rise significantly.

A heat exchanger (condenser) then extracts the heatenergy from the hot refrigerant to heat water for centralheating, underfloor heating or domestic hot water.

After giving up its heat energy the refrigerant turnsback into a liquid and is able to absorb energy from theenvironment, allowing the cycle to begin again.

1

2

3

4

5

6

Trusted technology

Using nature’s energy efficiently

Heat pumps are among the most efficient heatingand hot water systems available today.Approximately 75% of the energy needed forheating comes from the environment. This meansthat for every 1kWh of electricity used to power theheat pump compressor, between 3 and 4 kWh ofheating energy are produced, giving the heat pumpan efficiency of 300-400% or higher.

The heat pump’s “efficiency” is known as it’s“Coefficient of Performance” (CoP). This is simply aratio between the proportion of the total energysupplied that can be extracted from the environmentand the amount supplied by electricity to run theheat pump compressor. The higher the CoP, the more“free” environmental energy the heat pump is using!

Benefits of the outside air as a heat source

• Can be utilised all year round between +35°C and -25°C

• Always available and inexhaustible source of heat

• No requirement for the cost and land area of ground collectors

• Ideal for new build or retro fit applications, especially where

space is limited

• Can be used for heating, cooling, domestic hot water and

swimming pools

Air source heat pumps –benefits of the UK climate

Compared with central Europe (where air source heat pumps

are already very popular), the UK has a relatively moderate

winter climate. With average winter temperatures of around

5°C, seasonal co-efficients of performance comparable with

ground source heat pumps are achievable, without the

additional cost of expensive ground loop systems having to be

installed.

J F

28

24

20

16

12

8

4

0

28

24

20

16

12

8

4

0

M

A M J J A S O N D

Average UK temperatures over 12 month period

maximum temperature (°C)

minimum temperature (°C)

AIR SOURCE HEAT PUMPS

Energy


Heat Pumps

Benefits of the ground as a heat source

• Consistent temperatures below ground throughout

the year provides a high Co-efficient of Performance

• Can be used for heating, domestic hot water and

swimming pools

• Borehole systems can be used for either passive or

active cooling

At just 1m below the surface, the earth provides a

stable source of heat throughout the year.

At depths of 15m or more, the earth provides a

constant 10°C temperature.

GROUND SOURCE HEAT PUMPS

0 5

5m

February May November August

Depth

10 m

15 m

20 m

10

Surface temperature

15 20°C

A range of air to water heat pumps specifically designed for space and domestic water heating.

Calorex air source heat pumps are one of the most cost effective methods of realising a renewable energy source; free energy is

available at all times in the outside air around us. The air source heat pumps harness the freely available energy from the air

and upgrade it to provide usable heat for the home.

MCS approved heat pumpsSpecifically designed for UK housing and climate

• Offering energy efficiency, reduced running costs, and carbon emissions savings

• Qualifying technology under Renewable Heat Incentive

• Recognised technology for achieving Code for Sustainable Homes targets

• Stand alone use (monovalent) or integration with existing heating systems (bi-valent)

• Ideal for new build or retro fit into existing housing

• Can be used to provide heating for swimming pools

Bivalent installation Air source heat pump with existing boilerWhilst Calorex heat pumps can be sized to provide

your total heating and hot water requirement, it is

often better with existing properties to link a heat

pump into the system whilst retaining the back-up of

the existing boiler. The heat pump is sized to provide

a variable proportion of the annual heating

requirement (say 85%) with the existing boiler

integrated to deliver the balance on the coldest days.

AIR SOURCEHEAT PUMPS

Trade Prices. All offers are nett and exclude VAT. All prices correct as of 1st May 2011 and are subject to stock availability.

CALOREX DOMESTIC AIR SOURCE HEAT PUMPS

Key benefits

• Can deliver all of a property’s heating

and hot water needs

(Hot Water up to 65°C without

electrical back up)

• Easy to install

• Simple to control

• Low maintenance

• Low starting currents

• Range from 4.5kW – 15 kW

cal rexworld leaders in heat pumps for over 30 yearsheat pumps fo

Energy


Heat Pumps

CALOREX DOMESTIC AIR SOURCE HEAT PUMPS

MODEL AW4502AHY AW9002AHY AW12002AHY

@ Air On 0ºC, 90%RH* Output To Water (@ 55ºC)# 2.97kW 5.63kW 7.86kW

Electrical Input 1.54kW 2.93kW 3.98kW

Output To Water (@ 35ºC)# 3.39kW 6.56kW 9.11kW






Output To Water (@ 35ºC)# 6.30kW 11.81kW 16.50kW


ELECTRICAL DATA Electrical Supply 1 Phase 230V / 240V ~1N / 50Hz Miniumum Supply Capacity 13amps 25amps 32amps

Maximum Supply Fuse 1 ph N/Type C MCB 20.0amps 32.0amps 40.0amps

Soft Start Amps 1 ph N 19amps 35amps 31amps

AIR DATA Air Flow (Anem’ @ air on grille. Wet evap’) 3266m3/hr 3000m3/hr 4330m3/hr

Fan External Resistance STD 0mm WG 0mm WG 0mm WG

Fan External Resistance “F” 6mm WG 6mm WG 6mm WG

WATER DATA Water Flow ±20% 7.5I/min 15I/min 20I/min

Pressure Drop (Water) 1.1m hd 0.7m hd 0.4m hd

Condenser Volumns 2.0litres 3.5litres 6.5litres

Water Connections 3⁄4" BSPM inches 3⁄4" BSPM inches 1" BSPM inches

Condensate Water Connections 3⁄4" Domestic Waste

Typical Buffer tank sizes 50litres 100litres 150litres

SOUND DATA Sound Pressure @ 1 metre 57dB (A) 58dB (A) 60dB (A)

Sound Pressure @ 3 metres 37dB (A) 38dB (A) 40dB (A)

PHYSICAL DIMENSIONS Width (unpacked) 1143mm 1143mm 1583mm

Depth (unpacked) 562mm 562mm 612mm

Height (unpacked) 963mm 963mm 963mm

Weight (unpacked) 150kg 164kg 264kg

CODE BH000323 BH000324 BH000325 EXC VAT £3,676.00 £4,493.00 £6,827.00

Notes:- (1) Weight and Dimensions Nett(2) Allow 500mm clearance to service panels

(3) Minimum air temperature -15ºC(4) Calorex reserve the right to change or

modify models without prior notice

(5) *= Outdoor Heat Exchanger, Inlet Temp(6) #= Indoor Heat Exchanger, Inlet Temperature


DIMPLEX AIR SOURCE HEAT PUMPS

LAB M RANGE



MODEL LAB 7 M LAB 9 M LAB 11 M

Performance

Heating capacity A7/W35 (kW) 7.7 9.5 11.4

COP (A7/W35) 3.69 3.66 3.51

Operating Limits

Heating water supply/return (ºC) 52

Air (ºC) -15 to +25

Mechanical / Electrical

Dimensions HxWxD (mm) 850 x 931 x 367 1000 x 931 x 367 1250 x 1151 x 441

Weight (including packaging) (kg) 80 90 133

Sound pressure level at 10m dB (A) 54.8 55.5 55.8

Refrigerant type / total charge weight (kg) R407C / 2.52 R407C / 2.94 R407C / 3.83

Nominal voltage (V) 230 230 230

Defrosting Automatic, reverse cycle

CODE BH003904 BH003905 BH003903 EXC VAT £3,350.00 £3,500.00 £3,885.00

The Dimplex LAB M range of ASHPs provide an ideal cost effective solution to

reducing energy costs and CO2emissions for single domestic dwellings and

with their small footprint are ideal for both new build and retro fit situations.

Range features:• 3 models with nominal heating capacities from 7-11kW single phase

• Variable heating water flow temperatures from 30°C to 52°C, weather compensated

• Integrated system components • Electronic soft start reducing starting current loads

• Energy optimized auto adaptive defrost cycle

• Suitable for use with under floor heating, Dimplex SmartRad fan convectors or

conventional radiators

• MCS certificated

Dimplex has been producing innovative heat pumps for over 30 years with thousands of installations throughout Europe operating

efficiently in schools, offices, housing developments, community buildings and retail units in both private and public sectors.

Available in a wide range of sizes, Dimplex air source heat pumps use the freely available heat from the ambient air to provide

efficient heating and hot water at temperatures as low as -25°C. With low installation costs and minimal space requirements,

Diplex ASHPs are suitable for both domestic and commercial applications with models available for indoor or outdoor installation.

The new Dimplex LA PMS range of medium temperature

ASHPs bring the all the advantages of the popular LA PS

range to a single phase unit making them ideal for

domestic applications.

Range features:• 2 models with nominal heating capacities from

8-14kW single phase

• Maximum flow temperature of 65°C

• Wall mounted WPM heat pump manager

• Uses R290 natural refrigerant - GWP =3

• Sound-optimised through the use of low speed fans and

deflector hoods

• Suitable for use with under floor heating, Dimplex SmartRad fan

convectors or conventional radiators

Energy


Heat Pumps

LA PMS RANGE

MODEL LA 8 PMS LA 14 PMS

Performance

Heating capacity A7/W35 (kW) 8.0 13.3

COP (A7/W35) 3.8 3.9

Operating Limits

Heating Water Flow / Return (ºC) Up to 65 +/- 2

Air Temperature (ºC) -25 to +35


Dimensions HxWxD (mm) 1361 x 1362 x 852 1571 x 1552 x 852

Weight (including packaging) (kg) 232 256

Sound pressure level at 10m dB (A) 32 35

Refrigerant type / total charge weight (kg) R290 / 1.0 R290 / 1.8

Nominal voltage (V) 230 230

Defrosting Automatic, hot gas

CODE BH007024 BH007025 EXC VAT £5,950.00 £7,880.00

For more information visit www.dimplexrenewables.co.ukand download or request a copy of the Heat Pump brochure.For more information visit www.dimplexrenewables.co.ukand download or request a copy of the Heat Pump brochure.

The new Dimplex LA MAS range of medium temperature ASHPs provide

excellent levels of heating and hot water at temperatures as low as –20°C

and with their compact footprint are ideal for new build and retro-fit

domestic applications.

Range features:• 2 models with nominal heating capacities from 11-16kW single phase

• Variable heating water flow temperatures from 35°C to 55°C,

weather compensated

• Wall mounted WPM heat pump manager

• Quiet operation due to innovative fan with “owl’s wing” blades

• Electronic soft start reduces starting current loads

• Suitable for use with under floor heating, Dimplex SmartRad fan convectors

or conventional radiators

LA MAS RANGE



MODEL LA 11 MAS LA 16 MAS

Performance

Heating capacity A7/W35 (kW) 9.5 14.5

COP (A7/W35) 3.9 3.7

Operating Limits

Heating Water Flow / Return (ºC) Up to 55 +/- 2

Air Temperature(ºC) -20 to +35


Dimensions HxWxD (mm) 1340 x 852 x 1050 1550 x 852 x 1072

Weight (including packaging) (kg) 189 229

Sound pressure level at 10m dB (A) 33 34

Refrigerant type / total charge weight (kg) R404A / 3.8 R404A / 3.8

Nominal voltage (V) 230 230


CODE BH007026 BH007027 EXC VAT £4,828.00 £5,588.00

For more information visit www.dimplexrenewables.co.ukand download or request a copy of the Heat Pump brochure.

Energy


Heat Pumps

LA TU RANGE

MODEL LA 9 TU LA 12 TU LA 17 TU LA 25 TU LA 40 TU LA 60 TU

Performance

Heating capacity A7/W35 (kW)

1 compressor 9.2 11.6 10.0 13.9 20 31.9

2 compressors – – 19.6 26.1 35.7 60.1

COP (A7/W35)

1 compressor 4.2 4.3 4.5 4.5 4.6 4.3

2 compressors – – 4.4 4.4 4.4 4.1

Operating limits

Heating water supply/return ºC 58 58 58 58 58 65

Air ºC -25 to +35


Dimensions HxWxL (mm) 1460x910x750 1810x1250x750 1940x1600x955 1940x1600x955 2100x1735x980 2300x1900x1000

Weight (including packaging) (kg) 208 250 436 510 585 915

Sounds pressure level at 10m dB 30 32 37 40 43 50

Refrigerant type / R404A / 3.4 R404A / 4.2 R404A / 8.2 R404A / 10.2 R404A / 11.8 R417A / 19.4

total charge weight (kg)

Nominal voltage / 400 / 16 400 / 16 400 / 16 400 / 25 400 / 25 400 / 29.5

fuse rating (V/A)


CODE BH003902 BH003885 BH003890 BH003895 BH003900 BH004892 EXC VAT £6,922.21 £8,628.22 £12,582.49 £14,374.12 £17,375.77 £26,160.00

The Dimplex LA TU range of high efficiency air source heat pumps are designed

to maximise energy efficiency at low ambient air temperatures and are able to

deliver seasonal efficiencies comparable with ground source systems. Optimised

twin compression operation ensures the LA TU meets the high heating demands

of buildings such as offices, schools, hotels and retail units.

Range features:• Range of 6 models with nominal heating capacities from 9-60kW, three phase

• Variable heating water flow temperatures from 35°C to 55°C (65°C LA 60 TU),

weather compensated

• Intelligent load switching between single and dual compressor modes to maximize

efficiency (models 17Kw and over)

• Wall mounted WPM EconPlus heat pump manager

• Electronic soft start reduces starting current loads




GRANT AERONA AIR SOURCE HEAT PUMPS

Grant Aerona Air Source Heat Pumps include many innovative components, including the integration of a highly efficient

weather compensating device with dual temperature control and a 3kW electrical heat backup (there is also a factory fitted

option to upgrade the electrical backup to 6kW, by special order). This arrangement allows the unit to perform more efficiently

than some other heat pump designs, giving a reliable heat output, using less power, resulting in lower running costs.

The design also allows for easy installation, into a new or existing S-plan type system configuration.

Five ‘single phase’ units are available, with outputs from 6.5kW-15.5kW (not including the immersion back up).



Simple plug andplay installation

Flexible flow and return connectionscomplete with isolating valvessupplied (not shown)

All electricalglands andplumbingconnectionssituated at rear ofthe unit, for easeof installation(not shown)

Built in 3kWimmersion back up(BEAB Approved),which is upgradableto 6kW formonovalent systems(not shown)

CirculatingPumps

BTC Weathercompensation control

providing highlyefficient operation

ATC Controller complete withfive metre extension cable

Two-yearparts and

labourguarantee

(extendableto five years)

CE Approvedcomponents

Built in frostprotection

Factory fitted legs ensuresheat pump is protectedagainst snow build up,leaves and flood

Factory fittedcondensatedeflector(not shown)

Compact unitexternally sited

Proven high qualityexternal powdercoated paint finishto ensure case isprotected againstweathering

Base tray heatingelement to stop iceformation in coldweather conditions(not shown)

8.5kW Grant Aerona ASHP model illustrated

Compared with other domestic heating methods, a

Grant Aerona ASHP can benefit homeowners by

creating annual savings on fuel bills, as it can deliver

between 3.9kW and 5.8kW (depending on the model,

at 7oC air temperature/35oC water temperature) of

energy for every 1kW used to run the unit. It also

means that homes have a lower dependency on fossil

fuels, making them less susceptible to rising fuel costs.

Home heating in the UK additionally accounts for some

30% of CO2 emissions. Grant Aerona ASHP can help

reduce the amount of these harmful gases being

released into the atmosphere, therefore lowering the

homes carbon footprint.

Energy


Heat Pumps

GRANT AERONA AIR SOURCE HEAT PUMPS

MODEL HPAW65 HPAW85 HPAW110 HPAW130 HPAW155

Output 6.5kW 8.5kW 11.0kW 13.0kW 15.5kW

Height 920mm 1165mm 1165mm 1165mm 1470mm

Width 1120mm 1120mm 1120mm 1120mm 1120mm

Depth 430mm 430mm 430mm 430mm 430mm

Weight: Empty 94kg 115kg 138kg 152kg 172kg Full 111kg 134kg 156kg 170kg 191kg

Water Proof Level IPX4 IPX4 IPX4 IPX4 IPX4

Noise 52dB(A) 52dB(A) 52dB(A) 52dB(A) 58dB(A)

Refrigerant R407c R407c R407c R407c R407c

Operating Voltage 230v 230v 230v 230v 230v (1 phase) (1 phase) (1 phase) (1 phase) (1 phase)

Flow/Return Tappings 3/4”BSPF 3/4”BSPF 1”BSPF 1”BSPF 1”BSPF

Integrated Heating Element 3kW 3kW 3kW 3kW 3kW

Operating Temperatures (Air) -15ºC to 40ºC -15ºC to 40ºC -15ºC to 40ºC -15ºC to 40ºC -15ºC to 40ºC

Operating Temperatures (Water) 25ºC to 60ºC 25ºC to 60ºC 25ºC to 60ºC 25ºC to 60ºC 25ºC to 60ºC

Compressor Rotary Rotary Rotary Rotary Rotary

Base Tray Trace Element Yes Yes Yes Yes Yes

COP @ Air 7ºC/Water 35ºC 4.1 3.9 4.3 4.8 5.8

CODE BH002168 BH002169 BH002170 BH002171 BH002172 EXC VAT £4,143.00 £4,747.00 £5,375.00 £5,462.00 £6,002.00

GROUND SOURCEHEAT PUMPS


CALOREX DOMESTIC GROUND SOURCE HEAT PUMPS

A range of ground to water heat pumps specifically designed for space and domestic water heating.

The earth has the natural ability to absorb and store heat from the sun as well as heat from within the earth itself. In the UK,

just a few meters below the surface we discover average temperatures between 8°C and 10°C.

Calorex ground source heat pumps work on the principle of extracting this low grade solar energy which is stored in infinite

amounts in the ground around us and then upgrading this energy into useable high grade heat for the home.

Key benefits

• Efficiencies up to 400% forspace heating

• Consistent groundtemperatures offer greaterefficiency at low ambientair temperatures

• Small footprint unitsoptimise space

• Very low starting currents

• Delivers DHW to 65°C

• Range from 3.5kW – 15kW

MCS approved heat pumpsSpecifically designed for UK housing and climate

• Offering energy efficiency, reduced running costs, and carbon emissions savings

• Qualifying technology under Renewable Heat Incentive

• Recognised technology for achieving Code for Sustainable Homes targets

• Stand alone use (monovalent) or integration with existing heating systems (bi-valent)

• Ideal for new build or retro fit into existing housing

• Can be used to provide heating for swimming pools


JARGONBUSTED!

kWhKilowatts per hour

kWthKilowatts Thermal

? !*#

Energy


Heat Pumps

Notes:-(1) Weight and Dimensions Nett. (2) Allow 500mm clearance to service panels

(3) Calorex reserve the right to change or modify modelswithout prior notice

(4) *= Outdoor Heat Exchanger, Inlet Temperature(5) #= Indoor Heat Exchanger, Inlet Temperature

The above information is offered only as guidance and Calorex recommend that professional technical advice is sought prior to design and selection of sytem components.

CALOREX DOMESTIC GROUND SOURCE HEAT PUMPS

MODEL WW3500 WW5000 WW6500 WW8000 WW12000

Source Water/Brine On 0ºC*

Output To Water At 55ºC# 2.61kW 3.41kW 6.19kW 8.10kW 12.00kW

Electrical Input 0.87kW 1.19kW 2.19kW 2.6kW 3.9kW



C.O.P. 3.69 3.97 3.68 4.13 4.31

Source Water/Brine On 15ºC*




Source 0ºC (To EN 14511-2-2007)

Output To Water @35ºC# 3.17kW 4.54kW 6.24kW 8.40kW 11.70kW


C.O.P. 3.69kW 3.97kW 3.68kW 3.70kW 3.73kW

Water

Ground Loop Flow Rate ± 10% 12litres/min 17litres/min 25litres/min 25litres/min 35litres/min

Heating Flow Rate ± 10% 7·5litres/min 10litres/min 15litres/min 15litres/min 20litres/min

Ground/Heating Water Pressure Drop 0·84/0.8m hd 1.2/3·5m hd 3.9/1.4m hd 2.8/0.7m hd 1.4/0.4m hd

(@ Rated Flow)

Max Working Pressure 10bar 10bar 10bar 10bar 10bar

Source & Load In /Out Connections 3/4" BSPM 3/4" BSPM 3/4" BSPM 3/4" BSPM 1" BSPM

Heating Circuit Water Volume 1.40litres 3.00litres 3.60litres 3.60litres 6.70litres

(Heat Pump Only)

Ground Loop Circuit Water Volume 1.40litres 3.20litres 3.80litres 3.80litres 7.50litres

(Heat Pump Only)

Electrical

Electrical Supply 1 Phase 230/240V~1N/50Hz

Min Supply Capacity 1 Phase 11amps 15amps 20.4amps 25amps 32amps

Max Supply Fuse 1 Phase 15amps 20amps 32amps 32amps 40amps

General

Gas Charge R134a 2.5kg 2.5kg 2.4kg 3.2kg 5.3kg

Oil Type (Compressor) Polyolester Oil

Sound Pressure Levels @ 1 Metre 39dB(A) 40dB(A) 42dB(A) 48dB(A) 52dB(A)

Dimensions

Width Unpacked 500mm 500mm 715mm 715mm 915mm

Depth Unpacked 467mm 467mm 450mm 450mm 465mm

Height Unpacked 850mm 850mm 945mm 945mm 945mm

Weight Unpacked 103kg 109kg 133kg 158kg 196kg

Code BH000326 BH000327 BH000328 BH000329 BH000330

Exc VAT £3,593.00 £4,024.00 £4,946.00 £5,213.00 £6,207.00

DIMPLEX GROUND SOURCE HEAT PUMPS

SIH ME RANGE

Dimplex heat pumps are the energy efficient, environmentally sound heating system of the future, making a significant

contribution toward solving the problems associated with increasingly scarce and evermore expensive energy resources by using

the freely available, inexhaustible solar energy stored in the ground and converting this for the provision of heating and hot

water. Available in a wide range of sizes and configurations, Dimplex ground source heat pumps are ideal for use with under

floor heating or our own convection fan radiator –SmartRad for space heating. Models available are suitable for both domestic

and non-domestic applications to supply either heating and hot water or heating and cooling.

GROUND SOURCEHEAT PUMPS


MODEL SIH 4ME SIH 6ME SIH 9ME SIH 11ME

Performance

Heating capacity B0/W35 (kW) 3.7 6.0 8.9 10.7

COP (B0/W35) 4.3 4.1 4.0 4.5

Operating Limits

Heating water supply/return ºC Max 70 / Min 18

Brine ºC -5 to +25

Anti-freeze agent Monoethylene glycol


Dimensions HxWxD (mm) 805x650x462 805x650x462 805x650x462 805x650x462

Weight (including packaging) (kg) 115 118 130 133

Sound pressure level at 10m dB (A) 56 56 56 57

Refrigerant type / total charge weight (kg) R134A / 1.0 R134A / 1.2 R134A / 2.2 R134A / 2.4

Nominal voltage / fuse rating (V/A) 230 / 20 230 / 20 230 / 25 230 / 32

CODE BH007028 BH004041 BH004050 BH004014 EXC VAT £POA £4,150.00 £4,572.70 £5,162.70

The Dimplex SIH ME range of high temperature GSHPs provide flow temperatures up to

70°C enabling 100% of a homes heating and hot water to be provided without the need

for supplementary heating.

Range features:• 4 models with nominal heating capacities from 4-11kW


• WPM 2007 heat pump manager with removable control panel

• Electronic soft start controls to reduce current load

• Suitable for use with under floor heating, Dimplex SmartRad fan convectors or conventional radiators

• Produces domestic hot water to 60°C with no need for supplementary heating


Energy


Heat Pumps

SI TE RANGE

MODEL SI 17 TE SI 21 TE SI 24 TE SI 30 TE SI 37 TE SI 50 TE

Performance

Heating capacity B0/W35 (kW)

1 compressor 16.9 20.8 12.7 14.4 18.3 23.0

2 compressors – – 23.7 31.2 35.4 46.7

COP (B0/W35)

1 compressor 4.4 4.1 4.3 4.2 4.5 4.4

2 compressors – – 4.1 4.6 4.3 4.5

Operating limits

Heating water supply/return ºC Max 58 / Min 18 Max 58 / Min 18 Max 58 / Min 18 Max 58 / Min 18 Max 58 / Min 18 Max 60 / Min 18

Brine (heating) ºC -5 to +25

Anti-freeze agent Monoethylene glycol


Dimensions HxWxD (mm) 805x650x462 1445x650x575 1660x1000x775 1440x775x1000 1660x1000x775 1890x1350x775

Weight (including packaging) (kg) 133 225 282 365 371 486

Sounds pressure level at 10m dB 58 59 59 62 63 50

Refrigerant type / R407C / 2.3 R407C / 4.5 R404A / 3.7 R404A / 7.7 R404A / 6.8 R404A / 8.6

total charge weight (kg)

Nominal voltage / 400 / 16 400 / 20 400 / 20 400 / 20 400 / 20 400 / 50

fuse rating (V/A)

CODE BH004028 BH004031 BH004032 BH004033 BH004035 BH004040 EXC VAT £6,219.37 £8,239.94 £9,833.62 £10,764.41 £11,695.50 £14,702.27

The Dimplex SI TE range of high output 3 phase GSHPs provide a flexible

range of solutions for buildings with high heat consumption and ideal for

multiple occupancy dwellings to provide a building wide heating solution.

Range features:• 9 models with nominal heating capacities from 17-130kW


• Twin compressors on outputs of 24kW and over for higher capacity output

• Intelligent switching between single and dual compressor modes, maximising

efficiency and duty cycle

• WPM 2007 heat pump manager with removable control panel



• Three phase electrical connection with electronic soft start to reduce start current load

For more information visit www.dimplexrenewables.co.ukand download or request a copy of the Heat Pump brochure.

CALOREX DOMESTIC POOL HEAT PUMP RANGE

Pro-Pac

A range of domestic heat pumps designed for the UK climate, suitable for indoor and outdoor pools.

Outputs from 8kW to 22kW, swim all year round.

DOMESTIC POOLHEAT PUMPS


Key benefits

• Low carbon, low running costs

• Titanium heat exchanger

• Install outside or in a plant room

• No flues or fuel storage tanks

• Minimal maintenance

• Outputs from 8kW to 22kW

• Easy to retrofit to existingswimming pools


Energy


Heat Pumps

MODEL PPT8(Y) PPT12(Y) PPT16(Y) PPT22(Y)

Heat To Pool Water

Ambient 10°C Water 24°C 7.2kWh 9.9kWh 12.4kWh 17.7kWh


Electricity

Electrical Supply 1 Phase 230V/~1N/ 50HZ

Electrical Supply 3 Phase 400V/~3N/ 50HZ

Total Power Consumed



Min Supply Capacity (Max FLA) 1 Ph N 14.0A 17.0A 21.0A 31.0A

Min Supply Capacity (Max FLA) 3 Ph N 6.0A 6.4A 8.0A 13.0A

Recommended Supply Fuse 1 Ph N 20.0A 25.0A 30.0A 42.0A

Recommended Supply Fuse 3 Ph N 10.0A 10.0A 15.0A 20.0A

Water

Pool Water Flow Rate 115l/min 115l/min 123l/min 123l/min

Pool Water Pressure Drop (@ Rated Flow) 2.5m hd 2.5m hd 3.5m hd 3.5m hd

Max Working Pressure Pool Water 2.5bar 2.5bar 3.5bar 3.5bar

Pool Water Connections 1 1/2" BSPM

Condensate Drain Connections 3/4" Domestic Waste

Main Fan

Air Flow 2200m³/h 3300m³/h 3500m³/h 4900m³/h

(Anemometer @ Air On Grille. Dry Evaporator)

FLA 1 Ph N 0.8A 0.8A 0.8A 1.2A

Gas R407c

Dimensions

Width Unpacked 1049mm 1227mm 1377mm 1377mm

Depth Unpacked 593mm 593mm 602mm 602mm

Height Unpacked 720mm 720mm 720mm 720mm

Weight Unpacked - Standard Version 93kg 104kg 132kg 133kg

Weight Unpacked - Y Version 102kg 111kg 141kg 142kg

Code BH004856 BH004857 BH004858 BH004859

Exc VAT £POA £POA £POA £POA

NOTE 1) Performance design limitations ambient = 7ºC Min 40ºC Max Water = 10ºC Min 40ºC Max2) Performance design limitations ambient = -15ºC Min - 35ºC Max Water = 10ºC Min 40ºC Max - Y Version3) Pool water to have correct balance pH 7.2-7.8 Free Chlorine 1.0 - 2.0ppm Domestic 3.0 - 6.0 Commercial4) Allow 500mm clearance to service panels5) Calorex reserve the right to change or modify models without prior notice6) R407c Global Warming Potential (Gwp) 17001mm Wg = 9.8 Pa1mhd = 1.4 Psi1l/Min = 0.22gall/Min

HOT WATERHEAT PUMPS


Key benefits

• Up to 400% running cost and carbon savings against electricheating

• Up to 48% running cost andcarbon savings against fossil fuel systems

• Low carbon, low running costs

• Designed for the UK climate

• Reverse cycle defrost capacity

• Suitable for retro fitting and new build

• The only reliable, low carbon,low running cost solution

• Pro-Pac range is eligible forCarbon Trust loans

• Minimal maintenance backed by nationwide service

• Outputs from 25kW to 70kW

CALOREX COMMERCIAL PRO-PAC HOT WATER HEAT PUMPS

Energy efficient commercial hot water and space heating.

Harness the heat you don’t have to pay for.


JARGONBUSTED!kWh/m2/yearKilowatts per square metreper yearkWh/m3/yearKilowatts per cubic metreper year

? !*#

Energy


Heat Pumps

MODEL PRO-PAC 30H PRO-PAC 45H PRO-PAC 70H PRO-PAC 90H PRO-PAC 140H

DUTY- Output to Water @ 30ºC/55ºC

Air On @ 30°C, 90%RH 24.5/21.6kW 30.6/27.0kW 46.2/40.7kW 61.2/53.9kW 92.3/81.4kW

Electrical Input 5.1/8.0kW 6.5/10.2kW 9.1/14.8kW 13.0/20.5kW 18.4/30.0kW





Electrical Data

Electrical Supply 3 Phase 400V 3N~ / 50Hz V/ph/Hz

Minimum Supply Capacity 3 Phase 20amps 22amps 35amps 44amps 70amps

Recommended Supply Fuse 3 Phase 30amps 30amps 50amps 60amps 100amps

Max Starting Current STD (LRA) 80amps 102amps 174amps 102amps 174amps

Max Starting Current S/Start (LRA) 31amps 34amps 40amps 34amps 40amps

Air Data

Nominal Air Flow 6300m3/hr 10000m3/hr 14000m3/hr 20000m3/hr 28000m3/hr

Fan External Resistance 0Pa 0Pa 0Pa 0Pa 0Pa

Fan External Resistance (F) 60Pa 60Pa 60Pa 60Pa 60Pa

Water Data

Water Flow ±10% 66l/min 66l/min 130l/min 130l/min 260l/min

Pressure Drop (Water) 2.1m hd 4.5m hd 3.9m hd 3.9m hd 5.3m hd

Water Connections 1½" BSPM 2" BSPM

Condensate Water Connections 1½" BSPM (Optional)

(Optional Factory Fit)

General Data

Hermetic System

Gas Charge (R134a) BH 5.5kg 14kg 18kg 14 x 2kg 28 x 2kg

Compressor Type 1 x Scroll 1 x Scroll 1 x Scroll 2 x Scroll 2 x Scroll

Fan Type 1 x Axial 1 x Axial 1 x Axial 2 x Axial 2 x Axial

Sound Pressure Level @3m 62dB A 64dB A 68dB A 82dB A 71dB A

Dimension Data

Width (unpacked) 1555mm 1665mm 1810mm 2065mm 2210mm

Depth (unpacked) 790mm 1060mm 1190mm 1190mm 1650mm

Height (unpacked) 1080mm 1310mm 1310mm 1330mm 1340mm

Width (export, packed) 1745mm 1845mm 1990mm 2265mm 2410mm

Depth (export, packed) 900mm 1170mm 1300mm 1310mm 1770mm

Height (export, packed) 1250mm 1480mm 1480mm 1500mm 1505mm

Code BH004808 BH004809 BH004810 BH004811 BH004812

Exc VAT £7,540.00 £9,091.00 £13,527.00 £17,913.00 £26,692.00

HUMIDITY & CONDENSATIONCONTROL


Key benefits of aCalorex dehumidifier

• Energy efficient

• Low temperature operation

• Heat recovery to air

• Automatic operation

• Minimal maintenance

• Environmentally friendly

Key benefits

• The front line in flood recovery

• Concrete and plaster drying

• Fast gentle drying action alleviatesmaterial shrinkage

• Specially designed and built to withstandthe rigours of constructions sites

• Ideal for hire fleets

• Dual voltage 110/240v

• Non-marking wheels – leaves no tyre markson floors

CALOREX HUMIDITY & CONDENSATION CONTROL

Commercial dehumidification

Take control of humidity and condensation with the Calorex industry leading range of dehumidifiers.

Porta Dry

A range of robust fully mobile dehumidifiers, designed specifically to provide rapid drying solutions and humidity control.


Energy


Humidity & Condensation Control

NOTE a) These performance figures are based on air @ 30ºC and 60% RH. Boiler water at 80ºCb) Hygrostat adjustable from 20% to 80% RHc) Minimum air temperature on standard models 5ºC. Maximum air temperature on standardmodels 40ºC

d) R407c Global warming potential (GWP) 1700e) X models = hot gas defrost for low temperature operation

Calorex reserve the right to modify this specification at any time

MODEL PD150 PD300 PD600

110V 110V 230V 230V 110V 110V 230V 230V 110V 110V 230V 230V

Electrical DataFLA amps 7 3.8 9 4 16.8 7.5

LRA amps 33 18 33 15 61.6 28

Maximum Supply Fuse amps 10 10 13 13 15 13

Average Power Consumed watts 430 430 650 650 1070 1070

Maximum Power Consumed watts 650 650 976 976 1731 1731

Supply Voltage Limit % -10 /+15 -10 /+15 -10 /+15

Air Flow m³/h 225 225 380 380 710 710

Sound Level @ 3m dbA dbA 53 53 57 57 58 58

Refrigerant R407c R407c R407c R407c R407c R407c R407c

DimensionsHeight Unpacked mm 570 570 820 820 740* 740*

Width Unpacked mm 355 355 365 365 630 630

Depth Unpacked mm 355 355 363 363 1045 1045

Weight Unpacked kg 33 30 38 38 72 65

Code BH004813 BH004814 BH004815

Exc VAT £706.00 £1,005.00 £1,309.00

* In operating position

NOTE Global Warming Potential (GWP) R407c 1700 Calorex reserve the right to modify this specification at any time

MODEL DH75AX DH110AX DH110BX TTW75AX TTW110AX TTW110BX

Dehumidification 3.6L/hr 4.5L/hr 4.5L/hr 3.6L/hr 4.5L/hr 4.5L/hr

Air Heating (Sensible) Dehumidifier Only 4.7kW 6.4kW 6.4kW 4.7kW 6.4kW 6.4kW

Air Heating (Sensible) Dehumidifier & LPHW 11.3kW 12.2kW 12.2kW 11.3kW 12.2kW 12.2kW

Air Heating (Sensible) LPHW Only 8.9kW 8.9kW 8.9kW 8.9kW 8.9kW 8.9kW

Nominal Power Consumed

Fan Only 0.16kW 0.16kW 0.16kW 0.16kW 0.16kW 0.16kW

Compressor and Fan 1.46kW 2.12kW 1.94kW 1.46kW 2.12kW 1.94kW

Electrical Data

Electrical Supply 230V ~1N 50Hz 230V ~1N 50Hz 400V ~3N 50Hz 230V ~1N 50Hz 230V ~1N 50Hz 400V ~3N 50Hz

Max Fuse Rating 13amp 20amp 10amp 13amp 20amp 10amp

Nominal Running Amps 6.4amp 9.3amp 4.2amp 6.4amp 9.3amp 4.2amp

Full Load amps Min Supply Capacity 9.5amp 12amp 5.5amp 9.5amp 12amp 5.5amp

Compressor LRA 55amp 66amp 30amp 55amp 66amp 30amp

Air Data

Air Flow Nominal 1180m³/h 1180m³/h 1180m³/h 1180m³/h 1180m³/h 1180m³/h

General Data

Refrigerant R407c R407c R407c R407c R407c R407c

Sound Pressure Level @ 1m 53dB(A) 53dB(A) 53dB(A) 53dB(A) 53dB(A) 53dB(A)

Dimensions

Width Unpacked 1520mm 1520mm 1520mm 1474mm 1474mm 1474mm

Depth Unpacked 385mm 385mm 385mm 350mm 350mm 350mm

Height Unpacked 796mm 796mm 796mm 1167mm 1167mm 1167mm

Weight Unpacked STD/LPHW 143/147kg 144/148kg 144/148kg 143/147kg 144/148kg 143/147kg

Code BH004816 BH004817 BH004818 BH004819 BH004820 BH004821

Exc VAT £2,772.00 £3,242.00 £3,323.00 £3,009.00 £3,485.00 £3,566.00

Floor Standing Through the wall

CYLINDERSHEAT PUMPS


CALOREX CYLINDERS

The Calorex range of cylinders have been specifically designed to

work with the lower output temperatures delivered by heat pumps.

The Calorex cylinders incorporate larger primary coils for optimised

heat transfer at lower temperatures. The cylinder range offers the

flexibility of both vented and unvented options with variants

available to incorporate solar or other technologies.


JARGONBUSTED!G3A part of the building regulationsexplains how to prevent excessivetemperatures. This is more widelyadvertised at the moment becauseit has recently been amended toensure that any new build orbuilding conversion to domesticpurposes including a TMV2approved Thermostatic MixingValue (TMV) on any bath presenton the property.

? !*#

Energy


Heat Pumps

CYLINDER CAPACITY TYPE Dimensions Insulations CODE EXC VAT

HOT WATER CYLINDERS all fitted with 3kW - 1 phase immersion heater

140 Litres (584009) vented 1050 x 550mm 50mm foam only BH000300 £508.00

150 Litres (584067) unvented 1125 x 550mm 50mm foamed and cased BH000301 £1,355.00

150 Litres (584071) unvented slimline 1700 x 450mm 50mm foamed and cased BH000302 £1,413.00





210 Litres (584060) vented 1200 x 600mm 50mm foam only BH000307 £616.00

210 Litres (584050) unvented twin coil 1525 x 550mm 25mm foamed and cased BH000308 £1,757.00


250 Litres (584051) unvented twin coil 1780 x 550mm 25mm foamed and cased BH000310 £1,987.00

BUFFER TANKS all fitted with 3kW - 1 phase immersion heater, unvented tanks do not include expansion kits

50 Litres (584006) vented 450 x 450mm foam only BH000311 £336.00



50 Litres (640704) unvented 450 x 450mm foamed and cased BH000314 £643.00



COMBINED BUFFER TANKS AND CYLINDERS unvented tanks include 1 DHW expansion kit

Buffer Tank / Cylinder

50 L / 150 L (584012) vented 1500 x 550mm foam only BH000317 £1,111.00





50 L / 150 L (584003) unvented 1500 x 550mm foamed and cased BH000320 £1,881.00





CALOREX CYLINDERS

CYLINDERSHEAT PUMPS


DIMPLEX HEAT PUMP CYLINDERS

Dimplex Renewables have introduced a new range of unvented stainless steel

cylinders, Ec-Eau, which includes models specifically designed to deliver

mains pressure hot water at the lower temperatures produced by heat

pumps. Ec-Eau heat pump cylinders are specified with large, high surface

area heat exchangers, specifically sized to match the requirements of Dimplex

heat pumps and are available in a range of capacities from 125 to 300l.

Environmental sensitivity and efficient performance are key attributes of the

Ec-Eau range, which boasts 60mm of low GWP insulation foam and

innovative measures throughout to reduce heat loss, together with the use of

100% recyclable stainless steel inner components and a sleek black hard

wearing outer shell manufactured from completely recycled materials.

Range features:• Optimally sized, high surface area heat exchanger for heat pump operation

• Models from 125 to 300l capacity

• Tough, easy to clean outer casing made from recycled materials

• 60mm of CFC-free foam injected insulation for excellent heat retention –

minimising heat loss and energy consumption

• Immersion for sterilisation and back up heat

• Stainless steel inner cylinder with 25 year guarantee

• Supplied with expansion vessel and all the necessary safety equipment

required by government legislation

• Long life, low maintenance hot water supply

• Main pressure hot water for fast filling baths and powerful showers

• Simultaneous supply of water to all bathrooms

MODEL ECS125HP-580 ECS150HP-580 ECS210HP-580 ECS250HP-580 ECS300HP-580

Nominal volume (l) 125 150 210 250 300

Diameter (mm) 580 580 580 580 580

Height (mm) 960 1130 1504 1780 2080

Weight—empty (kg) TBC TBC TBC TBC TBC

External expansion vessel (l) 12 12 19 24 24

Coil surface area (m2) 2.2 2.8 3.0 3.0 3.2

Secondary return - - Yes Yes Yes

CODE BH007029 BH007030 BH007031 BH007032 BH007033EXC VAT £875.00 £900.00 £940.00 £980.00 £1,125.00

Energy


Heat Pumps

GRANT HEAT PUMP CYLINDERS

Heat Pump CylindersGrant have introduced a range of stainless steel cylinders specifically matched to the Aerona ASHP, which incorporate a larger

primary coil for quicker heat transference. The new cylinders are available in three indirect single coil versions, ranging from

125-400 litres and four indirect twin coil versions ranging from 170-400 litres. Grant Heat Pump cylinders feature compression

fittings which are conveniently located to make installation quicker and easier. These models additionally come complete with an

installation kit comprising: expansion vessel with hose and bracket, inlet manifold assembly, tundish, dual thermostat, 2-port zone

valve, Benchmark book, instruction manual/user guide.

DesignEvery unit is manufactured from the highest specification 1mm thick duplex

stainless steel. The outer casings are injected with 40mm of CFC/HCFC free,

fire retardant polyurethane foam. This insulation ensures all models achieve

surprisingly low standing heat losses and outstanding efficiency and

reliability.

Domestic Hot Water (DHW) Booster KitWhilst it is possible to raise the DHW to 60oC with an Aerona Air Source

Heat Pump, it can be more efficient to set the hot water temperature

between 45oC and 50oC and utilise Grant’s Domestic Hot Water Booster Kit

to take the cylinder up to the desired higher temperature. This unit comprises

a two-way enclosure with 20A rated contactor, incorporating a switch and

relay, which works with the immersion element fitted in all Grant cylinders.

Grant MonoWave Heat Pump Cylinders – Unvented Indirect Single Coil Duplex Stainless Steel

Code ModelCapacity

(ltrs)

ExpansionVessel (ltrs)

Coil RatingPrimary

(kW)

StandingHeat Loss

(kW/24hrs)

DimensionsHeight(mm)

Diameter(mm)

WeightEmpty

(kg)

Full(kg)

Exc VAT

BH002175 HPMONO/IND125 125 12 24.0 1.70 800 580 30 155 £1,240.00

BH002176 HPMONO/IND150 150 12 27.8 1.92 890 580 32 182 £1,313.00

BH005224 HPMONO/IND170 170 19 27.8 2.04 1075 580 45 215 £1,446.00

BH005225 HPMONO/IND200 200 19 47.0 2.45 1230 580 49 249 £1,508.00

BH005226 HPMONO/IND250 250 24 47.0 2.69 1480 580 59 309 £1,757.00

BH005227 HPMONO/IND300 300 24 56.6 2.71 1745 580 68 368 £1,928.00

BH004876 HPMONO/IND400 400 35 56.6 2.94 2110 580 76 476 £2,310.00

Grant DuoWave Heat Pump Cylinders – Unvented Indirect Solar Twin Coil Duplex Stainless Steel

Code ModelCapacity

(ltrs)

ExpansionVessel (ltrs)

Coil RatingPrimary

(kW)

Solar(kW)

StandingHeat Loss

(kW/24hrs)

DimensionsHeight(mm)

Diameter(mm)

WeightEmpty

(kg)

Full(kg)

Exc VAT

BH002177 HPDUO/IND170 170 19 32 8.5 1.70 800 580 30 155 £1,500.00

BH002178 HPDUO/IND200 200 19 47 10 1.92 890 580 32 182 £1,590.00

BH002179 HPDUO/IND250 250 24 47 16 2.04 1075 580 45 215 £1,840.00

BH002180 HPDUO/IND300 300 24 55.6 16 2.45 1230 580 49 249 £1,970.00

BH004877 HPDUO/IND400 400 35 55.6 23 2.69 1480 580 59 309 £2,400.00

UPONOR ENERGY SYSTEMS - GROUND COLLECTORS

CODE SYSTEM PRODUCT TYPE MODEL DESCRIPTION EXC VAT

BH002009 Energy Pipe Pipe 1002155 Energy PEM 40x2.4 U-Bend 2x50m ES £187.50





BH002014 Energy Pipe Pipe 1002149 Energy PEM 40x2.4 Single Pipe 100m ES £183.00






BH002030 Energy Pipe Fitting 1002138 40mm Straight Coupling ES £28.50

BH002031 Energy Pipe Fitting 1002146 40mm x 1" Female Thread Adaptor ES £16.81

BH002032 Energy Pipe Fitting 1002147 40mm x 11⁄4" Female Thread Adaptor ES £16.81

BH002033 Energy Pipe Fitting 1002143 40mm x 1" x 40mm FT Take Off Tee ES £31.13

BH002035 Energy Pipe Fitting 1002145 40mm End Plug ES £15.04

BH002036 Energy Pipe Fitting 1002142 40mm Tee Equal ES £39.93

BH002037 Energy Pipe Fitting 1002141 40mm 90º Elbow ES £28.55

BH002038 Energy Pipe Fitting 1002139 40mm x 1" Male Thread Adaptor ES £15.28

BH002039 Energy Pipe Fitting 1002140 40mm x 11⁄4" Male Thread Adaptor ES £16.81

BH002040 Energy Pipe Fitting 1002144 40mm x 11⁄4" Female Thread Elbow ES £21.27

GROUND COLLECTORS & THERMO PIPES


Horizontal Loops (‘slinkies’)These are often considered whenadequate land surface is available.The GSHP tranfers the solar energystored in the soil through the loopsand into your home.

Vertical Loops (‘borehole’)These are the ideal choice whenavailable land surface is limited. The GSHP transfers the storedgeothermal energy through theclosed loop circuit. The transferredenergy is ideal for heaing and cooling.

Pond (Lake) LoopsThese are economical to installwhen a body of water is available,because excavation costs arevirtually eliminated. Coils of pipeare simply placed on the bottomof the pond or lake.

Energy


Ground Collectors & Thermo Pipes

UPONOR PRE-INSULATED PIPE - THERMO PIPES

CODE SYSTEM PRODUCT TYPE MODEL DESCRIPTION EXC VAT

BH003366 ecoflex Thermo Pipe 1018109 Thermo Single 25/140mm per metre £31.57








BH003374 ecoflex Thermo Pipe 1018134 Thermo Twin 2x25/175mm per metre £43.27





BH003379 ecoflex Fitting 1018306 Rubber Endcap Set, Quattro 175 FOR 25+32 £37.72

BH003380 ecoflex Fitting 1018307 Rubber Endcap Set, Twin 200 FOR 40+50+ 63 £39.61

BH003381 ecoflex Fitting 1018308 Rubber Endcap Set, Twin 175 FOR 25+32+50 £38.68

BH003382 ecoflex Fitting 1018309 Rubber Endcap Set, Twin 175 FOR 25+32+40 £35.09

BH003383 ecoflex Fitting 1018328 Wipex Coupling 25x2,3-G1 PN6 £19.05


BH003385 ecoflex Fitting 1018330 Wipex Coupling 40x3,7-G1 1/4 PN6 £27.50

BH003386 ecoflex Fitting 1018331 Wipex Coupling 50x4,6-G1 1/4 PN6 £36.94





Uponor Pre-Insulated PipeUponor Pre-Insulated Pipe is the provenname for the innovative, flexible, pre–insulated plastic piping system totransport a variety of liquids both insideand outside of buildings. The systemalso comprises a complete range ofproducts for heating and hot and coldwater supplies. Its material propertiesgive long service life and as the pipesare lowweight and highly flexible, theycan be installed easily and quickly, evenover obstacles and round corners.Uponor Pre insulated pipe can be usedfor a wide variety of applications, a fewof which are detailed below.

By Medium• Potable Water• Heating Water• Cooling Water• Sewage• Foodstuffs and Chemicals

By Use• Connecting up individual buildings• Construction of a supply network• Urban engineering• Liquids for industry

The Advantages:

Easy to handle:Easy to handle: low-weight and highlyflexible, the pipe can be installedaround any obstacle.

No need for special tools forassembly:No special-purpose tools what so everare needed for any phase of theassembly.

“Endless” pipe lengths from the coil:No connections nor compensators - justroll off the length of pipe you need!

Fixed lengths - delivery service:Pipes can be cut to size as required anddelivered direct to the construction site- saving time and money!

Rapid work progress:Small trenches and quick, easyinstallation and job progress isguaranteed!

Service:From the planning phase to workcompletion we can offer you acomprehensive service package.

1

2

3

4

1

2

3

4

Ribbed jacket pipe made of impactproof polyethylene. Very flexible withhigh load bearing capacity.

Excellent low weight PEX foamheat insulation.

The two coloured ‘dog bone’ preventsmix ups in flow and return connections.

Corrosion proof, oxygen impermeablecarrier pipe made of PEX material.


Somethingin the airAll the good work done sofar in creating modernair-tight insulated houseshas brought about otherissues that need to beaddressed where ventilationis concerned.

Energy


Mechanical Extraction Ventilation

RIDGEONS RECOMMENDS

Installing one of these units into your build gives controllable

ventilation to the living areas and can create a greater sense of wellbeing. It gives

the homeowner lower fuel bills and can help create less damage to the building structure from mould.

where ventilation is concerned. Good, well-managed

ventilation means we can work to minimise smells,

reduce moisture levels that can be very damaging to

the fabric of the building and to ensure sufficient

oxygen for good cognitive performance. Therefore,

it’s vital to include products to put right any ill effects

a well insulated home might encounter. As part of

the 2010 Building Regulations Approved Document

L consultation workshop, it was pointed out that

modern buildings can lose up to 25% of heat due

to uncontrolled ventilation and air leakage. Heat

recovery appliances can recover more than 90% of

this heat and a central heat recovery system will take

air from the bathroom, kitchen, toilet and utility

(wet/smelly) rooms and feed it through duct into the

heat recovery unit before passing it to outside. Fresh

air is drawn from outside to the heat recovery unit

before distributing through another duct system to

living and bed rooms, creating a more comfortable

environment for the homeowner.

THE SCIENCE BIT

INSTALLATIONIS SIMPLEWhether retro-fitting or planning into a new build,

these systems are easy to install. Eye-level kitchen

cupboard fit or loft units can be simply installed and

plugged in with a three-pin plug. Watch out for

some loft units that are too big to go through the

loft trap as these have to be dismantled or installed

before the ceilings are completed.

Heat exchange takes place within the

appliance by blowing the outgoing stale

but warm air through an adjoining channel

to the incoming fresh cooler air which is

blown in the opposite direction. In line

with the second law of thermodynamics,

heat will move from the hotter region to

the colder region.

By keeping heat within the building,

demand on heating systems is reduced. This

is because the thermostat for the heating

system does not demand heat as often,

which in turn means the heating system

does not consume as much fuel.

NEW THINKING INENERGY EFFICIENT AIRDISTRIBUTION SYSTEMS

ENERGY-SAVING VENTILATION SYSTEMS

CODE MODEL DESCRIPTION EXC VAT

100mm Duct Systems - Round

BK007053 136-24 Extract or Supply Valve Ceiling Fitting £12.59

K5001014 1200-4 EasiPipe100 Round Pipe 2m £12.91

K5000856 493 EasiPipe100 Straight Connector £2.95

BK007036 496 EasiPipe100 Fixing Clip £1.66

BK007066 488 EasiPipe 100 FireBrake Duct Connector £63.72

BK002285 2404B Fresh Air Supply Set c/w Commisioning Plug with Brown Exterior Outlet £47.72


K5000136 135-5 EasiPipe125 Round Pipe 350mm £5.08


K5000380 590 EasiPipe125 Right Angle Bend £8.97

BK007049 5210 Insulated Hose 10m £89.81

125mm Duct Systems - Rectangular 204 x 60mm

K5000112 510 Supertube 125 Flat Channel 1m £9.11

BK007061 D3-2000 Supertube 125 Flat Channel 2m £18.19

K5000111 520 Supertube 125 Flat Channel Connector £5.36

BK007035 441 Supertube 125 Elbow Bend with rotating offset spigot 100mm Connection £8.97

K5000120 541 Supertube 125 Elbow Bend with rotating offset spigot 125mm Connection £8.97

K5000122 550 Supertube 125 Horizontal 90º Bend £11.16

BK007038 555 Supertube 125 Horizontal 45º Bend £10.03

K5000124 570 Supertube 125 Round to Rectangular Adapter £8.97

K5000344 582 Supertube 125 Horizontal T Piece £15.77

BK007037 544 Supertube 125 Adapter connects Code 541 to 100mm £2.04

BK007055 5B303 Supertube 125 Universal Duct £15.67

BK007056 5SL05 Supertube 125 Duct Silencer, 500mm £68.87

BK007057 5SL10 Supertube 125 Duct Silencer, 1m £99.07

K5001037 587 Supertube 125 FireBrake Duct Connector £63.72


K5001194 135-6 EasiPipe150 Round Pipe 350mm £7.18


K5001191 690 EasiPipe 150 Right Angle Bend £11.16

K5000385 693 EasiPipe 150 Straight Pipe Connector £4.13

BK007058 620 Circular Adapter 160mm to 150mm £19.06

BK007039 819 Spigot Adapter 200mm to 150mm £2.80

BK007050 6210 Insulated Hose 10m £101.81

EASIPIPE100 ROUND PIPE 2MSUPERTUBE 125 HORIZONTAL

90 DEG BENDDOMUS FIREBRAKE SUPERTUBE

125 DUCT CONNECTOR

MECHANICAL EXTRACTIONVENTILATION



150mm Duct Systems - Rectangular 220 x 90mm

BK007059 905B Double Airbrick, Brown £8.73

BK007046 977 Double Airbrick Adapter to MegaDuct 220 £4.34

BK007062 D4-2000 MegaDuct 220 Flat Channel 2m £29.50

BK007040 920 MegaDuct 220 Flat Channel Connector £6.16

BK007041 941 MegaDuct 220 Elbow Bend with rotating offset spigot 100mm Connection £10.64

BK007590 961 MegaDuct 220 Elbow Bend with rotating offset spigot 150mm Connection £10.64

K5001215 950 MegaDuct 220 Horizontal 90º Bend £12.85

BK007043 955 MegaDuct 220 Horizontal 45º Bend £11.56

BK007045 970 MegaDuct 220 Straight Round to Rectangular Adapter £10.96

BK007047 982 MegaDuct 220 Horizontal T Piece £20.16

BK007044 957 MegaDuct to Supertube 125 Adapter £4.34

BK007060 9SL10 MegaDuct 220 Duct Silencer, 1m £142.13

BK007065 987 MegaDuct 220 FireBrake Duct Connector £69.37

Accessories and fixings

BK007048 4411 Universal Roof Cowl, Connection for 100,110, 125, 150 and 160mm Pipe £133.42

BK007042 954 Double Airbrick Adapter to Round Pipe, Connection for 100, 125 and 150mm Pipe £47.11

BK007063 DDSEAL Plastic Ventilation Ducting Sealant, 310ml £7.82

BK007812 MAS87 FireBrake Intumesent Mastic, 310ml £4.66

BK007064 UB1005 UniBrak Fixing and Suspension Product, 5 pack £22.57

BK007052 125-UNI Universal Adjustable Hose Clip 65-215mm £2.95

BK007051 10TP12 Thermal Insulation Sheet 1m x 1.2m £12.59

BK007054 50TP45 Aluminium Duct Sealing Tape - 50mm Width £15.94

HR01 MVHR Range

BH003745 HR01W Wall/cupboard Appliance £795.00

BH003746 HR01WB Wall/cupboard Appliance - Summer bypass £901.00

BH003747 HR01L Loft Appliance £795.00

BH003748 HR01LB Loft Appliance - Summer bypass £901.00

BH003749 HR01P PIR Sensor £82.68

BH003750 HR01H Humidity Sensor £82.68

BH003751 HR01M System Monitor £67.42

BH003752 HR01FG4 Spare Filter G4 £42.40

BH003753 HR01FG2 Spare Filter G2 £26.50

Energy


Mechanical Extraction Ventilation

ENERGY-SAVING VENTILATION SYSTEMS CONTINUED...

DOUBLE AIRBRICK, BROWN LOFT APPLIANCEWALL/CUPBOARD APPLIANCE

Underfloor Heating SystemsUnderfloor heating is arguably the most appealing form of energy efficient heating

to homeowners. It produces even warmth throughout the house, and providing the

envelope of the house is well-insulated, very littleheat is lost. It’s also rather luxurious,

potentially adding extra sale ability to your properties.


EnergyUnderfloor Heating

SPACE ANDMONEY SAVING

RIDGEONS RECOMMENDSUnderfloor heating gets a big thumbsup from us. It’s cost effective, easy toinstall and requires less energy whilstproviding consistent, reliable heat. Italso has a bit of the wow factor built in,which we think makes it a winner!

1. Easy to install and reliable

2. Cost effective and lower energy bills

3. Highly efficient, producing an even heat

4. Works effectively with heat pumps or solar water systems

Previously thought of as a space-saving alternative in

kitchens and bathrooms where there might not be

room for radiators, underfloor heating is becoming more

and more prevalent throughout the home. It works

particularly well under laminate and tiles, but is not

always the best option for placing underneath carpets.

Water-based systems are the most energy efficient

working particularly well with heat pumps and solar

thermal. Installing it from the start in new builds makes

it extremely cost effective, as it can be laid as you build.

Retrofits can be more costly with the need to remove any

existing flooring, but if installed during renovation

it is a very financially viable option.

LOW ENERGYEQUALS LOWER BILLSWater-based underfloor heating systems are

widely available and are most efficient when

coupled with ground or air pumps or solar

thermal panels.They are heated to a lower

temperature than conventional water central

heating, typically 50°C rather than 60°C. If

used with a high efficiency condensing bolier

they are also very efficient and can give

homeowners significant savings.

Lower energy bills and a consistent reliable

warmth are making this form of heating

increasingly popular. And of course, they help

your development score extra credits from a

Code assessor.

Why chooseunderfloor heating?

JG SPEEDFIT UNDERFLOOR HEATING


B-PEX Pipe Coils

H1502583 15BPEX 15mm x 25m Coil B-PEX Pipe £35.17





Polybutylene Pipe Coils - More Flexible

H1504022 15BPB 15mm x 100m Barrier PB Pipe £165.44





Room Packs

H1504351 JGUFHPACK20 UFH Room Pack 20m2 £835.45

H1504352 JGUFHPACK30 UFH Room Pack 30m2 £954.86

H1504112 JGROOMPACK Single Room Control Unit £459.06

Manifolds/Pump

H1504113 JGUFHMAN4 4 Zone Manifold £277.53





H1504349 JGUFHMANELB Pair of UFH Manifold Elbows £58.30

H1504350 JGUFHMANEXT Manifold Extension Kit £138.92

H1504335 JGCONTROL UFH Control pack £378.00

PIPE COILS MANIFOLDS

HYDRONICUNDERFLOOR HEATING


ROOM PACK

NET MONITOR

TOUCHPAD NETWORKCONTROLLER

STAPLES

SPREADER PLATE


Electrical Controls 12v Network

H1504336 JGNETADAP1 1 Part Net Adaptor 12v £366.45

H1504337 JGNETADAP2 2 Part Net Adaptor 12v £471.45

H1504338 JGNETMON1 Net Monitor 12v £756.00

H1504339 JGNETMON2 Net Monitor - GSM 12v £939.75

H1504340 JGPCLITE PC Network Software 12v £414.75

H1504341 JGPCPRO Network Software - Multi 12v £834.75

H1504342 JGPROBE Temperature Sensor Plate £12.60

H1504343 JGSENSOR White Sensor Box £14.70

BH005328 JGSTAT/TS/V3 Programmable Room Therostat 12v £84.00

BH005329 JGSTATPLUS/TS/V3 Room Stat W/H Water Circuit 12v £86.10

H1504346 JGTOUCHPAD Touchpad Network Controller 12v £624.75

H1504360 JGUH1 8 Zone Wiring Centre 12v £256.20

H1504361 JGUSB USB Adaptor 12v £355.95

Electrical Controls 240v Network

BH003578 JGTM4 Touchscreen Time Clock 4 Channel 240v £102.00

BH003579 JGUFH3 Wiring Centre 8 Zone 240v £112.00

BH003580 JGPRTE Programmable Room Thermostat 240v £74.00

BH003581 JGPRTHW Programmable Room Thermostat Plus Hot Water Control £88.00

BH003582 JGDSSB Dial Setback Room Thermostat 240v £44.00

H1504117 JGUFHA240V/2 Actuator Valve (240v) £33.92

Spares

H1504362 SPUFH1 Mixing Valve Cartridge Kit £71.66

H1504363 SPUFH2 Pump Pack Flow Temp. Gauge £13.23

H1504364 SPUFH3 Over Heat Stat. £38.59

H1504365 SPUFH4 Manifold Flowmeter £24.81

H1504366 SPUFH5 Manifold Balancing valve £19.30

H1504367 SPUFH6 Dust Cap For Balancing £1.71

Fixing Systems

H1504347 JGUFHCONELB UFH Conduit Elbow £2.44

H1504263 JGUFHEDGE 25m UFH Edge Insulation Strip £28.67

H1504348 JGUFHGUN Staple Gun £357.70

H1504125 JGUFHSTAPLE 60mm Pipe Staples (300) £51.00

BH005331 JGUFHSTAPLE40 40mm Pipe Staples (300) £51.00

H1504353 JGUFHRAIL 15mm Mounting Rail £5.03

H1504354 JGUFHSP165 15mm Spreader Plate-I-Joists £11.59

H1504355 JGUFHSP250 15mm UFH Spreader Plate 250mm £3.57

H1504356 JGUFHSP400 15mm UFH Spreader Plate 400mm £12.10

H1504357 JGUFHTILE 1400mm x 800mm Floor Tiles £15.75

H1504359 JGUFHTOOL Fixing Tools £204.14

Energy


Underfloor Heating

JG SPEEDFIT UNDERFLOOR HEATING

UPONOR UNDERFLOOR HEATING


PIPE & ACCESSORIES

H1502993 1013462 MLCP Coil 50m 16 x 2mm £87.50

H1503162 1013377 MLCP Coil 75m 16 x 2mm £131.25

H1502994 1013378 MLCP Coil 100m 16 x 2mm £175.00

H1503352 1000020 14-16mm Plate 0.72m x 1.14m 20mm £8.22

H1503448 1000017 Multi-Foil 60 x 1m £252.60

H1503449 1002070 Uni-Foil 1.2m x 25m 4.5mm £156.90

H1503450 1000080 PE Edging strip 0.15m x 50m 10mm £53.50

H1503353 1000018 Clamp Track 14-20 50mm x 1m £2.61

H1503719 1002297 Kombi Klip Long 33mm (Bag of 300) £39.00

H1503182 1013989 MLCP Euro Compression Adaptor 16x3⁄4"FT £3.02

H1503563 1013073 Ball Valve 1" FT x 1" MT £19.07

CONTROLS & CONTROL PACKS

H1503169 1002134 Single Zone Control Pack £167.56

H1503565 1002329 Compact Control Pack v4 230v £376.93

H1504160 1000535 Wired T-35 Thermostat £24.83

H1503454 1013087 8 Way Control Unit 230v £88.47

H1503356 1013006 Actuator 24v £25.40

MANIFOLDS

H1503555 1002311 Manifold with Topmeter 6 loops £201.21







AREA PACKS

H1503155 1002076 MLCP Small Area Pack 14m2 £392.35

H1503451 1002073 MLCP Small Pack 14-28m2 £1,035.73

H1503452 1002074 MLCP Small Pack 29-38m2 £1,166.08

PIPE CONTROL PACK MANIFOLD



Energy


Underfloor Heating


One Pack - Screed

BH000204 1046012 Screed 1 Loop 1 Zone <14m2 £848.21

BH000205 1046013 Screed 2 Loop 1 Zone <28m2 £978.15

BH000206 1046014 Screed 2 Loop 2 Zone <28m2 £1,186.14




























One Pack - Timber

BH000233 1046041 Timber 1 Loop 1 Zone <14m2 £986.69

BH000234 1046042 Timber 2 Loop 1 Zone <28m2 £1,343.30






























THERMOBOARD UFH SYSTEMS

PIPE & STAPLES RED PIPE SYSTEM PLATES RED PIPES


Staple System

H9301632 15UH324 Staple Gun £306.61

H9301602 15UH230 Staples for 16mm UFH Pipe (Pack of 300) £33.10

System Plate System

H9301599 16UH196 System Plate (1275 x 975mm) £9.21

Pipe

H9301730 16UH025 UFH Pipe Coil 16mm x 25m £42.70










UFH Ancillary Components

H9301601 15UH153 Edge Expansion Foam (25m x 150mm) £24.50

H9301736 16UH320 16mm Pipe Supports (Pack of 50) £14.64

H9301737 16UH550 10mm Socket 16mm Spigot (Pack of 10) £56.81

H9301738 16UH560 16mm Socket 10mm Spigot (Pack of 10) £56.81

H9301739 16UH530 16mm Elbow Connector (Pack of 10) £19.34

H9301740 16UH540 16mm Equal Tee (Pack of 10) £27.33

H9301741 16UH510 16mm Straight Connector (Pack of 10) £15.77

H9301742 16UH001 16 x 10 x 16mm Branch Reduced Tee (Pack of 10) £35.10

H9301743 16UH002 16mm Demountable Stop End (Pack of 10) £14.58

H9301727 16UH245 Fitting Repair Kit £7.56

H9301744 16UH250 Pressure Test Connection Kit £13.76

BH005244 16UH255 Air Vent Kit £48.72

H9301724 69UH015 Manifold Cover (up to 4 ports) 570 x 500 x 220mm £96.54



Energy


Underfloor Heating


Thermoboard UFH Manifolds

H9301756 88UH211 Composite Manifold - Control Pack £334.80

H9301757 88UH110 Composite Manifold - Starter Pack £78.57

H9301758 88UH111 Composite Manifold - One Port Pack £39.75

H9301759 88UH113 Composite Manifold - Three Port Pack £106.06

Thermoboard UFH Manifold Ancillary Components

H9301752 15UH236 Pipe Clamps (Pack of 2) £1.60

H9301623 15UH239 Curved Pipe Supports (Pack of 2) £4.26

H9301760 88UH311 Composite Manifold 22mm Isolation Valves (pair) £30.20

H9301675 52UH402 230V 2 Wire Actuator (for use with 52UH108) £27.79

H9301745 52UH602 24V 2 Wire Actuator (for use with 52UH714) £27.79

Thermoboard UFH Room Temperature Controls

Standard Controls

H9301748 52UH701 Single Zone Kit (c/w Programmable Thermostat) £183.60

H9301749 52UH714 14 Zone Control Centre £162.00

H9301747 52UH772 Thermostat £51.30

H9301746 52UH773 Programmable Thermostat £54.00

H9301750 52UH782 Wireless Thermostat £59.40

H9301751 52UH783 Programmable Wireless Thermostat £70.20

BH005245 52UH795 Remote Sensor Probe £19.01

Networked Controls

H9301682 52UH108 8 Zone Control Centre £150.17

BH005246 52UH873 Programmable LCD Thermostat £51.82

BH005247 52UH863 Programmable Thermostat (with Touch Screen) £88.87

BH005248 52UH874 Programmable Thermostat (with DHW) £51.82

BH005249 52UH195 Remote Sensor Probe £9.09

BH005250 52UH194 Remote Sensor Probe Cover £1.52

BH005251 52UH891 Master LCD Touch Screen Unit £389.11

BH005252 52UH892 Net Monitor £389.11

Electric UFH Matting

H9301716 53UH101 Electric Mat 100 1m2 £72.21




BH005253 52UH278 230V Programmable Thermostat with Dual (Air & Floor) Sensor £50.89

THERMOBOARD UFH SYSTEMS

MANIFOLD CONTROL CENTRE AND THERMOSTAT

ENERGY EFFICIENTRADIATORS


DIMPLEX SMARTRADS

Dimplex SmartRad intelligent, wall mounted fan convector radiators combine fast and responsive , accurate room by room

heating with energy efficiency and style. Designed specifically to work with heat pumps, SmartRad provides a cost effective and

practical alternative to under floor heating.

Utilising a compact high efficiency heat exchanger and intelligently controlled fan to assist convection and delivery of heat into

the room, SmartRad is significantly more powerful than traditional radiators and as a result can be up to 3½ times smaller whilst

generating the same level of heat output. Containing only 5% of the water volume of a conventional steel radiator, SmartRad

with it’s low thermal mass heats up four times more quickly and reacts more responsively to changes in room temperature,

providing improved control, comfort and energy savings.

SmartRad is ideal for retro fit installations in place of conventional radiators or in new buildings instead of or in conjunction with

under floor heating.

Key features:

• Stylish compact design, with a choice of white

metal, white glass or black glass finishes

• Energy efficient alternative to conventional radiators

• Cost effective, practical alternative to under floor

heating

• Designed for low water temperature operation:

• Optimises heat pump CoP

• Reduces heat pump system running costs

• Reduces heat pump system CO2 emissions

• 3½ times less wall space required than a

conventional radiator

• Ultra-low water content provides energy saving

through:

• 4 times faster room heat up and 70% less

energy than a standard radiator with

comparable output to bring a room from

10°C to 21°C

• Responsive reaction to incidental heat gains

(e.g. Solar gain) prevents overheating and

energy wastage

• Individual heater temperature control:

• Close tolerance electronic thermostat providing

automatic control over fan speed output

• Delivers high levels of comfort through improved

room temperature stability

• Optional plug in 24 hour or 7 day programmers

Energy


Radiators

FINISH MODEL

White Metal SRX080M SRX120M SRX140M SRX180M

White Glass SRX080WG SRX120WG SRX140WG SRX180WG

Black Glass SRX080BG SRX120BG SRX140BG SRX180BG

Output (kW) 0.8 1.2 1.4 1.8

Heating water supply/return ºC Max 85 / Min 15 at 150 l/h

Performance *at medium fan speed and air inlet temp of 20ºC

Heating capacity* mean water 40ºC 0.6 0.9 1.1 1.5






Dimensions HxWxD (mm) 530x503x145 530x670x145 530x740x145 530x911x145

Weight (kg) 13 16 18 23

Hydraulic connections 15mm left and/or right hand connection or from rear

Water content (I) 0.31 0.43 0.48 0.60

Normal voltage / fuse rating (V/A) ~230 / 3

Cable supplied 1 meter

Power Input (W)

Low fan speed 17 22 26 24

Medium fan speed 20 32 40 35

Boost 27 47 60 53

Standby power 1

CODE FOR METAL FINISH BH004100 BH004101 BH004102 BH004103 EXC VAT £300.00 £320.00 £335.00 £375.00

CODE FOR WHITE GLASS FINISH BH004063 BH004060 BH004061 BH004062 CODE FOR BLACK GLASS FINISH BH004059 BH004056 BH004057 BH004058 EXC VAT £360.00 £384.00 £402.00 £450.00

For more information visit www.dimplexrenewables.co.ukand download or request a copy of the SmartRad brochure.

New developments have meant there is now arange of super efficient thermal heat storesavailable. Whereas most practical active solarheating systems have storage for a few hours to aday's worth of heat collected, using a thermalheat store tank can keep hot water at a highertemperature than is actually needed thereforealways has the hot water there to release whenrequired. This technology is made practical by thelarge heat of fusion of water.

Neatly stored storage unitsTypically made from a copper or steel vesselit is usually located neatly out of the wayfrom the collec tor or boiler. Using a ThermalStore allows the water temperature to be inexcess of that required, ensuring that thereis a constant source of hot water, ‘on tap’.

All in all, this is exciting new technologythat means you can control, store and heatwater through various means.

Once you’ve created the hot water through solar thermalpanels or heat pumps, it’s imperative it is stored efficientlyand effectively, ready for use.

Get into hot water

Energy


Thermal Store

Grant ThermaWave DesignGrant’s unique new ThermaWave Store allows multiple heat

sources to be connected in a number of different ways, with

the back-up feature of two 3kW immersion elements. This unit

makes it possible to now have a gas or oil fired boiler

connected to an Aga or solid fuel appliance and also a

renewable heat source such as solar thermal or a heat pump.

Furthermore, underfloorheating system manifolds as well as

radiator circuits can also be directly connected to the store.

A separate hot water kit is also available for those situations

where a nominal domestic hot water supply is required. Where

there is a greater demand for domestic hot water, the store

should be linked with Grant’s MonoWave or DuoWave

cylinders.

Exciting featuresUnique design slows inlet water velocities ensuring multi-level

temperature distribution. High specification 1mm thick duplex

stainless steel is utilised which resists all forms of corrosion;

compression fittings on all connections (except 28mm)

dramatically reduce installation time, 40mm injected

polyurethane foam insulation gives an exceptionally low standing

heat loss, making the stores highly efficient and a 25-year shell

guarantee (subject to terms and conditions) which endorses the

durability of the product.

GRANT THERMAWAVE THERMAL STORE RANGE

OPEN-VENTED DUPLEX STAINLESS STEEL

MODEL GTHERM/250 GTHERM/300 GTHERM/400

Capacity 250 litres 300 litres 400 litres

Pressure Regulator 3 bar 3 bar 3 bar

Dimensions – Height 1425mm 1680mm 2190mm

Diameter 580mm 580mm 580mm

Weight (Empty / Full) 55kg / 305kg 61kg / 361kg 74kg / 474kg

CODE BH000984 BH000985 BH000986

EXC VAT £2,012.00 £2,112.00 £2,400.00

RIDGEONS RECOMMENDS

If you’re installing renewables in yournext project, suggest a thermal heat

store too. It helps to make the most of thetechnology you’re planning to include and is

the best way to help the home owner save as muchmoney as possible on their energy bills.

All Prices Exclude VAT. Prices correct at time of print but may be subject to change.

The heat is always onThe sun is the most efficient renewable energy source and isnowhere near utilised to its full potential. If it were, just half an hourof its energy would be enough to provide power for the entire worldfor a whole year. Now is the time to start taking solar seriously andintroducing this renewable energy to your developments.


Energy

GO SOLARThere are two types of solar collection systems, SolarPhotovoltaic (PV) and Solar Thermal. PV panels convertsolar radiation to electricity that can be used in thebuilding, with any excess being sold to the grid. Solarthermal collectors convert solar radiation to heat whichcan be used for heating domestic hot water and forspace heating. It is possible to install both on a roof, andthe government incentive schemes in the form of Feed InTariffs (FITs) and the recent Renewable Heating Incentive(RHI) even ensure short payback periods while making acontribution to the reduction in CO

2 emissions, making

the world a better place for future generations.

Solar systems are now “permited development” whichmeans that planning permission is not required to installsolar systems. Exceptions are in listed buildings and insome cases on buildings in a Conservation Area.

SOLAR THERMALSolar thermal systems collect solar energy as

heat, which is transferred to a storage cylinder

for use as domestic hot water or for space

heating.

Solar thermal systems should be configured to

give 60-70% of a household’s annual domestic

hot water, with 100% coverage during the

summer months! During winter this will drop to

around 20% of the domestic hot water

demand. With the ever-increasing price of fuel,

solar thermal results in great savings. The

recently announced Renewable Heating

Incentive (see section on RHI below), will act as

an incentive to install solar thermal and decrease

payback times dramatically.

Solar thermal systems can also be used to heat

swimming pools in homes or leisure centres.

Collectors can be flat plate or evacuated tube

collectors. Evacuated tube collectors can be

more efficient than flat plate collectors, but are

generally more expensive. Flat plate collectors

are robust and simple in design, and should last

in excess of 35 years. The heat is transferred

from the collectors to the storage cylinder using

a food-grade glycol solution, which prevents

frost damage to the system in winter.

Solar thermal systems are the most cost-effective

way to increase the energy efficiency of a

building and achieve compliance with the Code

for Sustainable Homes and Part L of the building

regulations. Solar thermal can be easily fitted to

new build or existing buildings, and require little

maintenance.

SOLAR PHOTOVOLTAICSolar PV systems use silicone crystals to create electrical

energy from daylight. Although daylight levels in the UK are

not as high as many parts of the world, there is more than

enough energy to produce 1000s of kWh of electricity from

a house roof.

The panels can be installed on almost any roof, canopy or

façade, and can even be mounted on frames directly on the

ground or a flat roof.

Panels are available in standard silver, or for a more

aesthetically pleasing look, all black. In most cases planning

permission is not required for domestic properties as these

systems fall under the permitted development rules.

PV panels are available in various sizes and efficiencies, in

order to maximise the ammount of energy produced from a

system a high yielding panel should be chosen

The PV system is connected to the existing electrical supply of

the property, which means the ‘free’ generated electricity can

be used through existing switches and sockets in the property.

Any electricity that is not used is supplied to the national grid,

with the system owner being paid for the amount which they

‘export’. This payment is in addition to the ‘Feed In Tarrif’

payment for the generation of the electricity.

FIT for purposeHomes or premises should ensure they are as energy efficient as possible before installing renewable technology and applying for the scheme. If you’re talking to your customers about it make sure they have adequate loft and cavity wall insulation, heating controls, double glazing and are using low-energylighting to help them get the most from their Feed-in Tariff.

POWER TO THE PEOPLE

Feed-in Tariffs (FITs] were introduced in April 2010 and are now available to all homeowners, landlords, smallbusinesses and communities that generate their own electricity from a renewable or low-carbon source. Thescheme requires energy companies to make regular payments back to the bill payer. They can also receivebonus payments if they feed back extra power to the National Grid. The introduction of this scheme is sure tobring about renewed interest in renewable technology and you need to be ready to meet the demand.

A surge of interest in renewables thanks to the introduction of a newGovernment scheme - Feed-in Tariffs

You can use the electricity you generate meaningyou don’t have to import from the grid

You export electricityback to the grid whenyou don’t use it.You are paid an export tariff.

Electricity is created by solar panels. Your electricity supplier pays you for each unit of electricity you generate.

You import electricity from the gridwhen you need additional power.

JARGONBUSTED!Feed-in TariffsPayments to ordinary energy users for

renewable electricity they generate if

they use it themselves. They can

receive a bonus if they transfer energy

back to the National Grid.

? !*#

Energy


Any system up to 4kW on a new build 37.8p per kWh

PV systems registering with the scheme from 1st April 2011 to 1st March 2012 will benefit as follows

43.3p per kWh

37.8p per kWh

37.8p per kWh

Any system up to 4kw on an existing property (retrofitted)

Any system up to 4-10kw new build or retrofitted

Any system up to 10-100kw new build or retrofitted

If you normally pay 12p per kWh for your electricity, you would effectively get both the PV generated power consumed

for free and the FiT. So on a retrofit system up to 4kw this would mean 12p + 41.3p = 53.3p per kWh saving!

There are a number of electricity-generating technologies the scheme covers, including solar PV – roof mounted or stand-alone, hydroelectricity and wind turbines. Various grants are available tohelp fund the installation of renewables, for more information on this go towww.energysavingtrust.co.uk

The figures for a typical three bedroom detatched house*

Average cost of purchasing and installing a 2.0kW Philadelphia Solar PV System (8 modules)

Estimated 25 year total benefit from Philadelphia Solar System*

Appropriate power generated per year by the Philadelphia Solar System (Solar Facing, 45º Pitch, No Shading) 1686 kWh / year

Infilation Rate Used

Payback period

C02 Saving equivalent

Fuel Inflation Rate Used

Estimated year 1 Feed in Tariff payment from Philadelphia Solar System

£11,000.00

4%

13%

£730.00

£51,500.00

9 years

307566 kettles being boiled

Example is an approximate estimation only. Feed-In-Tariff payments are Index linked for the full 25 year term, the starting rate willdecrease in future years, but once the system is registered the rate will then increase in line with inflation. Electricity import at 14p/k/kWhand export at 3.1p/kWh.

Feed in tariffs How they work

SOLAR – PHOTOVOLTAIC (PV)ELECTRIC


Dimplex solar PV is available in a range of comprehensive kits to simplify specification and ordering. Containing all the

components required for installation the kits range in output from 1.38kWp (six modules) to 5.52kWp (24 modules), based

around Dimplex 230W polycrystalline modules.

The kits are ideal for both new build and retro fit projects and employing MCS-certificated hardware are eligible for the

Government’s Feed in Tariff incentive when installed by a MCS accredited installer.

Key features:• Complete system packages—all parts required for

installation included.

• High efficiency Dimplex polycrystalline modules for excellent

energy production and reliability

• Industry-leading G83 grid connect inverters

• Ofgem approved generation meters

• Accessories including communication and monitoring devices

and generation monitoring displays available

• Suitable for MCS-certificated installations.

• Custom system design service for bespoke or large systems

• Meets planning requirements for renewable energy

DIMPLEX SOLAR PV

Technical Information

Data DXPVM230P6-30 Module

Dimensions 1640 x 992mm x 50mm (1.63m2)

Weight 20.5kg

Frame Anodised Aluminium Alloy

Glass 3.2mm tempered glass

Solar Cell Polycrystalline 156mm x 156mm

Number of cells 72

Junction box IP65 rated

Connection Type2 x 1000mm x 4mm2 cable with MC3 interconnectors

Max power at STC (pmax) 230Wp

Output tolerance -0% to +3%

Max power operating voltage (Vmp) 29.00

Max power operating current (Imp) 7.99A

Certification IEC61215, IEC61730

Product warranty 5 years

Performance guarantee to 95% rated peek output

5 years

Performance guarantee to 90% rated peek output

10 years

Performance guarantee to 80% rated peek output 25 years

The Dimplex solar PV system brings together high efficiency polycrystalline

PV modules with an inverter, roof mounting system, generation meter, isolators

and associated cables, to create a complete solution for residential and light

commercial properties.

For non standard roof mounting (eg Flat roofs) or systems larger than 5.52kWp,

Dimplex offer a design service to specify systems to exactly meet requirements.

Energy


Solar – Photovoltaic

COMPLETE SYSTEM PACKAGES

Code Manufacturers CodePV array

output (kWp)Number ofmodules

Rows Columns Exc VAT

BH004453 DXPV138/230/2/3PT 1.38 6 2 3 £4,288.84

BH004454 DXPV184/230/2/4PT 1.84 8 2 4 £5,514.21

BH004455 DXPV207/230/3/3PT (P) 2.07 9 3 3 £6,145.79

BH004456 DXPV230/230/2/5PT 2.3 10 2 5 £6,944.19

BH004457 DXPV276/230/2/6PT 2.76 12 2 6 £7,977.93

BH004458 DXPV276/230/3/4PT 2.76 12 3 4 £7,977.93

BH004459 DXPV276/230/4/3PT 2.76 12 4 3 £7,977.93

BH004460 DXPV345/230/3/5PT 3.45 15 3 5 £9,751.07

BH004461 DXPV368/230/2/8PT (P) 3.68 16 2 8 £10,337.49

BH004462 DXPV368/230/4/4PT (P) 3.68 16 4 4 £10,337.49

BH004463 DXPV414/230/3/6PT 4.14 18 3 6 £11,444.04

BH004464 DXPV460/230/2/10PT 4.6 20 2 10 £12,918.56

BH004465 DXPV460/230/4/5PT 4.6 20 4 5 £12,918.56

BH004466 DXPV552/230/4/6PT 5.52 24 4 6 £15,256.19

Code Manufacturers CodePV array

output (kWp)Number ofmodules


BH004467 DXPV138/230/2/3S 1.38 6 2 3 £4,288.84

BH004468 DXPV184/230/2/4S 1.84 8 2 4 £5,514.21

BH004469 DXPV207/230/3/3SS (P) 2.07 9 3 3 £6,145.79

BH004470 DXPV230/230/2/5S 2.3 10 2 5 £6,944.19

BH004471 DXPV276/230/2/6S 2.76 12 2 6 £7,977.93

BH004472 DXPV276/230/3/4S 2.76 12 3 4 £7,977.93

BH004473 DXPV276/230/4/3S 2.76 12 4 3 £7,977.93

BH004474 DXPV345/230/3/5S 3.45 15 3 5 £9,751.07

BH004475 DXPV368/230/2/8S (P) 3.68 16 2 8 £10,337.49

BH004476 DXPV368/230/4/4S (P) 3.68 16 4 4 £10,337.49

BH004477 DXPV414/230/3/6S 4.14 18 3 6 £10,337.49

BH004478 DXPV460/230/2/10S 4.6 20 2 10 £12,918.56

BH004479 DXPV460/230/4/5S 4.6 20 4 5 £12,918.56

BH004480 DXPV552/230/4/6S 5.52 24 4 6 £15,256.19

Portait Kits: Plain tile roof kits – suitable for most roof types

Portait Kits: Slate tile roof kits – suitable for most slate roofs

All the kits above are also available in landscape. Please ask for details.

GRANT SOLAR PV

'The Grant Solar PV system has many unique features. It is available in simple kit form making ordering straightforward. Bespoke

systems of almost any size can also be designed and supplied using the same basic components found in the kits. The systems

utilise MCS Approved 180W, 185W and 190W Watt Grant monocrystalline Solar PV modules. The module frames are made

from corrosion-proof, anodised aluminium and meet the highest requirements in terms of stability and durability.

Grant Solar PV modules have a performance guarantee of up to 25 years!'



Technical Information

Data Monocrystalline Module

Outer dimensions (L x W x H) 1580mm x 808mm x 45mm

Frame type Anodised, silver

Front glass 3.2mm Tempered glass

Weight 15.5kg

Cell Size 125mm x 125mm

Number of cells 72

Connection system/cross section ofsolar cable

Multi contacttype 4 / 4mm2

Lengths:Positive cable/Negative cable

125 cm ± 5cm /80cm ± 5 cm

Rated voltage (Vmpp) 36.4V

Rated current (Impp) 4.95A

Packing unitSingle or2-module packs

Suitability to type /type approval

EN61215 / EN61730

Electrical classification Safety Class 2

Product guarantee 5 years

Performance guarantee to 90% Pmpp min

10 years

Performance guaranteeto 80% Pmpp min

25 years

Energy



Complete SolutionsGrant Solar PV is available as standard ‘on-roof’ kits comprising:

180M PV modules Inverter, DC isolator (single input), Solar cable

MCT3 to MCT4, Base profile roof bars, Module stop clip, Module

retaining end clip, Module retaining mid clip, Credit meter and

Roof anchors.

GRANT SOLAR PV

CODE Manufacturers CodePV array

output kWpNumber of modules


BH004822 GPV3 GOP1/G180 0.54 3 1 3 £2,087.00

BH004825 GPV6 GOP2/G180 1.08 6 2 3 £4,295.50

BH004831 GPV8 GOP2/G180 1.44 8 2 4 £5,357.00

BH004834 GPV10 GOP2/G180 1.8 10 2 5 £6,488.50

BH004837 GPV12 GOP2/G180 2.16 12 2 6 £7,826.00

BH004840 GPV14 GOP2/G180 2.52 14 2 7 £8,777.50

BH004843 GPV16 GOP2/G180 2.88 16 2 8 £10,244.50

BH004846 GPV18 GOP2/G180 3.24 18 3 6 £11,386.00

BH004849 GPV20 GOP2/G180 3.6 20 2 10 £13,038.00

All the kits above are also available in landscape. Please ask for details.

RENEWABLE TECHNOLOGIES SOLAR PV

Renewable Technologies is an eco-friendly company leading the

way in affordable, renewable and sustainable energy.

Renewable Technologies are committed to providing innovative,

effective and efficient renewable energy solutions to mitigate

climate change and to work to best practices under the

Microgeneration Scheme to provide quality service and technical

support to our clients.

Our service lines include Microgeneration Scheme Accreditation

training courses, wholesale supply of MCS approved solar PV

products, technical system design and renewable energy

consultancy services.

We are delighted to partner with Ridgeons Ltd to bring their

considerable knowledge and customer service experience within

the building industry alongside Renewable Technologies to offer

unrivaled technical support and customer service in the supply of

world leading renewable energy products to the UK market.

Both companies are committed to providing quality products

sourced from companies with the same ethos and commitment

to sustainablilty to ourselves.

Renewable Technologies is the sole UK importer of Philadelphia

PV Modules and EnaSolar Inverters. The Company is also the

SOLARWATT Uk distributor from April 2011.



COMPLETE MCS PACKAGES

Renewable Technologies have designed these kits to beas complete as possible and have sourced high quality components. All Kits include:

• Philadelphia Solar M60-250W panels or

• SolarWatt M250-60 GET AK panels

• Appropriate EnaSolar or SunnyBoy inverter

• Reel of 4mm Solar Cable • 1 IMO 20A AC Isolator• 1 IMO 16A DC Isolator per String with Cable Glands• 1 Landis+Gyr Pulse Meter with Extended Cover• MC4 Male and Female Connectors• Suitable Shüco End and Intermediate Module Clips• Schüco Mounting Rails• Schüco Brackets with appropriate fittings• Complete Set of Warning Labels

Schüco fixing kits are included in the package cost for a chosen roof type in this list:

• Stainless Steel Brackets for Pan Tiles• Aluminium Brackets for Plain Tiles• Hanger Bolts for Slate with Wooden Substructure• Brackets for Trapezoidal Metal Roofs (< 20° Pitch)• Hanger Bolts for Roofs with Metal Substructure

Kits of different roof types are available on request pleasecontact us for a quote. These include but are not limitedto the following mountings :

• Flat Roof Brackets for set 30° Pitch• Ground mounted systems

Energy



INTRODUCING ENASOLAR INVERTERS

KEY FEATURES

Integrated lockable DC and AC isolators

reducing the need for additional wall

mounted switches, speeding installation

and reducing clutter.

Wide operating voltage range with a low

start point means that each inverter size can

cover a wide range of panel options.

Built in Wi-Fi and stats package. With most

houses having a Wi-Fi network this allows

the home-owner to monitor their own

system from a home computer. It also

allows EnaSolar to monitor the system and

perform remote diagnostics.

The 1.5kW unit weighs only 14kg.

This is achieved whilst maintaining

galvanic isolation using a high frequency

transformer.

Modular system, the back mounting plate is

the same for the 1.5kW, 2.0kW and 3.0kW

inverters which allows upgrading to be easy

and time efficient.

Renewable Technologies are pleased to be a European distributer for the EnaSolar products.

We work closely with EnaSolar in the UK to bring their exciting range of new inverters to the

market. We are currently the only EnaSolar Center of Excellence in the UK.

EnaSolar, wholly owned and operated as the solar division of EnaTel Limited, are proud of

their high standards and benefit from 25 years experience in the telecommunications market.

After mastering the DC power field in New Zealand they are manufacturing high quality solar

PV inverters for the worldwide market.

Inverter 1.5kW 2.0kW 3.0kW

Input

Maximum Open Circuit Voltage (Voc) 500V DC 600V DC 600V DC

MPP Operating Voltage Range (Vmpp) 120-450V DC 120-500V DC 120-500V DC

DC Nominal Operating Voltage 300V DC 350V DC 380V DC

Maximum Input Current (Immp) 11A 12A 15A

Maximum Input Power (Pmax) 1640Wp 2200Wp 3200Wp

Reverse Polarity Protection Inherent crowbar diodes.

Isolation From AC Mains High frequency transformer.

Earthing Isolated, +ve earth, -ve earth selectable.

Output

Nominal Output Voltage 230V AC

Output Voltage Range 202-259V AC

Max Output Current 7.5A 10A 15A

Line Frequency 50Hz

Total Harmonic Distortion <5% at full load, nominal output voltage.

Max Efficiency >96% >96% >96.5%

Max Euro Efficiency >94% >94.5% >94.5%

Nominal Output Power 1500W 2000W 3000W

Maximum Output Power 1600W 2100W 3100W

Power Factor >0.98 >0.98 >0.98

System

Islanding Protection AS4777.3, G83/1

Night-time Consumption: <1.2W

Operating Temperature Range -30°C to +50°C (full power), +70°C (derated)

Acoustic Noise <33dBa @ 1m.

Display 4 line x 16 character. (no buttons)

Data Interface Wi-Fi IEEE 802.11 with web interface.

Environmental Rating IP55

Dimensions 330mm x 550mm x 145mm. (excluding antenna)

Weight 14kg 14kg 15kg

PHILADELPHIA SOLAR M60-250W COMPLETE PACKAGES

Philadelphia Solar is the first and only solar manufacturer in the

Kingdom of Jordan. Officially established in 2007 in the Al-Qastal

industrial area, 30km from the capital Amman.

The photovoltaic modules are manufactured using state of the art

production lines from Japan, all models use TUV and UL certified

components.

Philadelphia Solar is committed to providing the highest quality

product with outstanding performance and liability.



S o l e U K I m p o r t e r

CodeManufacturers

CodeOutput

kWStrings Rows Columns Inverter

PanelOrientation

Mounting RailDirection

Price Ex VAT

BH007100 PV129P3X2192 1.00 1 2 2 SunnyBoy1200 Portrait Horizontal £3,846.00

BH007101 PV129P3X2I167 1.50 1 2 3 EnaSolar 1.5kWGT Portrait Horizontal £5,308.00







BH007108 PV129P8X2I96 4.00 2 2 8 SunnyBoy 3800 Portrait Horizontal £12,154.00

BH007109 PV129P4X4I96 4.00 2 4 4 SunnyBoy 3800 Portrait Horizontal £12,154.00

BH007110 PV129P2X2I92 1.00 1 2 2 SunnyBoy 1200 Landscape Vertical £3,846.00

BH007111 PV129L3X2I167 1.50 1 2 3 EnaSolar 1.5kWGT Landscape Vertical £5,308.00







BH007118 PV129L8X2I96 4.00 2 2 8 SunnyBoy 3800 Landscape Vertical £12,154.00

BH007119 PV129L4X4I96 4.00 2 4 4 SunnyBoy 3800 Landscape Vertical £12,154.00

Kits between 1.5kW and 3.5kW and below supplied with EnaSolar Inverters. 1kW kits are supplied with SMA SunnyBoy 1200 and 4kW kits aresupplied with SMA SunnyBoy 3800 Inverters. EnaSolar 4kW Inverters will become available later in the year.

On purchase roof bracket type will need to be chosen from the following list: Stainless Steel Pan Tile Brackets (S) , Aluminium Plain Tile Brackets (A) ,Hanger Bolts for Slate Roofs (W) , Hanger Bolts for Metal Substructure (M) or Tin Roof Trapezoidal Section Brackets (T).

SOLARWATT solar modules are known for outstanding quality and optimum

yield. Their use of tested raw materials, careful processes and extremely

strict test procedures guarantees high performance, durability and reliability.

• SOLARWATT modules are approved in accordance with

international standards IEC 61215-2 and IEC 61730.

• All the materials used in their production undergo

comprehensive tests in SOLARWATT's own certified

laboratory to ensure their suitability.

• During the manufacture each production step is thoroughly

monitored to ensure compliance to exacting standards.

• SOLARWATT module specifications are double that required

by IEC 61215-2 climate tests.

Made in Germany, SOLARWATT have been producing high quality solar PV

modules for over 20 years.

Energy



SOLARWATT M250-60 GET AK COMPLETE SYSTEM PACKAGES

UK Distributor

Kits between 1.5kW and 3.5kW and below supplied with EnaSolar Inverters. 4kW kits are supplied with SMA SunnyBoy 400TL Inverters. EnaSolar 4kWInverters will become available later in the year.

On purchase roof bracket type will need to be chosen from the following list: Stainless Steel Pan Tile Brackets (S) , Aluminium Plain Tile Brackets (A) ,Hanger Bolts for Slate Roofs (W) , Hanger Bolts for Metal Substructure (M) or Tin Roof Trapezoidal Section Brackets (T).

CodeManufacturers

CodeOutput

kWStrings Rows Columns Inverter

PanelOrientation

Mounting RailDirection

Price Ex VAT








BH007127 PV131P8X2I96 4.00 2 2 8 SunnyBoy 4000TL Portrait Horizontal £13,996.00

BH007128 PV131P4X4I96 4.00 2 4 4 SunnyBoy 4000TL Portrait Horizontal £13,996.00








BH007136 PV131L8X2I96 4.00 2 2 8 SunnyBoy 4000TL Landscape Vertical £13,996.00

BH007137 PV131L4X4I96 4.00 2 4 4 SunnyBoy 4000TL Landscape Vertical £13,996.00

Solar Thermal The sun is the most efficient renewable energy source and theonly true “free“ energy source. Even in the UK there is sufficientincoming solar radiation to make solar systems viable, withapproximately 950 kWh/m2/year.

JARGONBUSTED!MCSMicrogeneration Certification Scheme.

A scheme that ensures installers and

equipment conform to certain quality

standards and practises.

? !*#

Energy


Solar – Thermal

Incentive to changeRenewable Heat Incentive (RHI) creates incentive to install renewable heat sources

The Renewable Heat Incentive will be introduced from July 2011 and will be a payment for every kWh of heat produced

from a renewable heat source. The RHI payment will be made for a variety of qualifying technologies, at different rates

(see table below). Importantly, in order to be eligible for the RHI payment, a system must have been installed by an

MCS-accredited installer using MCS or Solar Keymark accredited equipment.

Phase 1 of the scheme will run from July 2011, and will apply to any non-domestic installation. Phase 2 will run from

Autumn 2012, and will include domestic installations. The RHI scheme will make payments for any qualifying installation

completed after July 2009. Most technologies will measure the quantity of heat produced, and the end-user will inform

Ofgem of the quarterly energy reading. Payments will be made quarterly, and will continue for a period of 20 years. This

will significantly reduce the “payback period” that is often calculated.

Domestic installations will still benefit from the RHI before Phase 2 by means of a “Premium Payment”, which is a one-off

grant towards the capital costs of a renewable heating system. Systems that have received the Premium Payment will still

be eligible for RHI payments when Phase 2 starts in Autumn 2012.

Level of support

Tariff Name Eligible technology Elible sizesTariff rate

(pence/kWh)Tariff duration

(Years)Support Calculation

Small biomass

Solid biomass;Municipal SolidWaste (incl. CHP)

Less than 200 kWth

Tier 1: 7.6

20

Metering. Tier 1 applies annually up tothe Tier Break,Tier 2 above theTier Break. TheTier Break is:

installed capacityx 1,314 peak load

hours, i.e.:kWth x 1,314

Tier 2: 1.9

Medium biomass

200 kWthand aboveless than1000 kWth

Tier 1: 4.7

Tier 2: 1.9

Large biomass1000 kWth and above

2.6 Metering

Small ground source

Ground-sourceheat pumps;

Water-source heatpumps; deepgeothermal

Less than100 kWth

4.3

20 MeteringLargeground source

100 kWth and above

3

Solar thermal Solar thermal Less than 200 kWth 8.5 20 Metering

Biomethane

Biomethaneinjection and

biogas combustion,except fromlandfill gas

Biomethane allscales, biogas

combustion lessthan 200 kWh

6.5 20 Metering

kWth – Kilowatt Thermal

WHY CHOOSE SOLAR HOT WATER?WHY CHOOSE SOLAR HOT WATER?


In the context of ever-rising energy costs, climatechange and changing legislation, the need for aheating and hot water technology that is future-proof, cost-effective and able to use anunlimited, sustainable source of energy is essential.

It’s time to harness the sun’s energy

Every year the sun provides over 8000 times as much energy as

we consume worldwide and in the UK alone we receive

between 900 and 1200kWh of energy per m2 of land per year.

On average, every home spends 20-25% of its combined

annual energy bills on water heating. In the UK a well designed

solar water heating system can provide almost all the hot water

for a home during the summer months and on average around

50-60% year round.

This is why solar water heating systems are one of the most

cost-effective and environmentally-friendly renewable energy

solutions available, reducing fuel bills and building carbon

dioxide emissions.

Low carbon hot water solution

Whenever fossil fuels such as coal, oil or gas are burnt, carbon

dioxide is released. CO2 is the principal contributor to the

green-house effect which is leading to long term climate change.

However as solar water heating can provide as much as 60% of

a building’s annual hot water demand from renewable energy,

building carbon emissions can be significantly reduced,

particularly in new homes where water heating is fast becoming

the largest source of energy use.

This has an obvious benefit when considering Building

Regulations Part L compliance, planning obligations requiring

minimum contributions from renewable energy or Code for

Sustainable Homes ratings.

Future proof energy costs

Using renewable solar energy means that running costs

compared with traditional fossil fuelled water heating systems

can be reduced. More importantly, using free energy from the

environment future-proofs the system against fossil fuels as

they become ever more scarce and their price inevitably

continues to rise.J F M A M J J A S O N D

.

100

90

80

70

60

50

40

30

20

10

0

Co

llect

or

con

trib

uti

on

(%

)

Month of the yearAmount of hot water supplied by solar thermal for the annual hot

water demand of a typical 4 bedroom house.

900

1000

1100

1200

0º60º

55º

5º10º

Annual Contribution from Solar Water Heating

Energy


Solar – Thermal

WHY CHOOSE SOLAR HOT WATER?HOW SOLAR WORKS

Solar energy is available in abundanceall around us. Every year the sunprovides 8000 times more energy thanwe consume globally ready for usewhenever you need it.

Solar water heating systems harnesssolar radiation to efficiently andeffectively heat water stored in acylinder, ready for use whenever youneed it.

One system, many applicationsSolar systems comprise of three key elements

which are highly versatile enabling them to be

used for a variety of applications from small

apartments to large commercial installations.

CollectorRoof mounted or free

standing, the collector

captures solar radiation

from the sun and passes

it onto a working heat

transfer fluid.

Heat transfer systemThe pump station,

controlled by the

control unit, moves the

captured solar energy

from the collector to

the water storage

cylinder.

Storage cylinderEnergy from the heat

transfer fluid is

transferred to the

stored water via a coil

heat exchanger. The

cylinder has a

supplementary heat

source to provide back

up for times when

insufficient solar energy

is available.

Solar Thermal with a secondary heat generator

Solar Thermal with direct electric heating

1

2

3

SOLAR – THERMALWATER


Dimplex solar hot water kits combine all the components required for installation in easy to select packs to simplify purchase and

specification. With a range of roof kits, hydraulic packages and cylinder sizes, Dimplex has the solution for every solar water

heating requirement from small apartments to large commercial installations. The kits are ideal for both new build and retro fit

projects and employing Solar Keymark approved hardware will be eligible for the Government’s Feed in Tariff incentive when

installed by a MCS accredited installer.

Roof kit packs:• Choice of 2m2, 4m2 and 6m2 flat platecollector kits

• On roof mounting for plain tile, corrugatedtile or slate roofs

• Integrated roof mounting for tile or slateroofs with optional flashing kits to covervisible on-roof pipe work

• Free standing panels for flat roofs or ground level mounting

Hydraulic packs:Suitable for the majority of domesticapplications with a static height up to 7 m,includes:• Pump station• Control unit• Heat transfer fluid• Expansion vessel and fixing kit

Range of cylinders:Available with single coil and dual immersionsfor direct electric systems or dual coils for usewith a secondary heat source such as a boiler.(see Dimplex Solar Cylinders page for details)

Accessories:A complete range of accessories is availableto make installation and maintenance quickand easy using pre-insulated flexible hoses,vent tiles, flow meters and heat transfer fluidtesting kits.

DIMPLEX SOLAR THERMAL HOT WATER

Energy


Solar – Thermal

Household size (people) 1 2 3 4 5 6

Cylinder size in litres

175 ECi175ST-580 or ECSd175ST-580

215 ECSi210ST-580 or ECSd210ST-580



Roof kit1 collector and

roof mounting kit2 collectors and

roof mounting kits3 collectors and

roof mounting kits

Corrugated tile SOL220CT or SOL201CT SOL440CT or SOL402CT SOL660CT or SOL603CT

Plain tile SOL220PT or SOL201PT SOL440PT or SOL402PT SOL660PT or SOL603CT

Slate SOL220S or SOL201S SOL440S or SOL402S SOL660S or SOL603S

Integrated for tiles SOL220TI SOL440TI SOL660TI

Integrated for slate SOL220SI SOL440SI SOL660SI

Integrated with flashing, tile SOL220TF SOL440TF SOL660TF

Integrated with flashing, slate SOL220SF SOL440SF SOL660SF

Free standing SOL220F or SOL201F SOL440F or SOL402F SOL660F or SOL603F

Hydraulic kit SOLHYPK0 or SOLHYPK1

Accessories 10m Flexible hoses SOLFH10

15m Flexible hoses SOLFH15

DIMPLEX SIZING GUIDE

For more information visitwww.dimplexrenewables.co.ukand download or request a copyof the Solar Thermal brochure.


On roof installation kits— corrugated tile roof

BH007034 SOL220CT 2.2sqm on roof kit—1 high efficiency collector £700.00

BH007035 SOL201CT 2sqm on roof kit—1 standard efficiency collector £550.00

BH007036 SOL440CT 4.4sqm on roof kit—2 high efficiency collectors £1,350.00

BH007037 SOL402CT 4sqm on roof kit—2 standard efficiency collectors £1,050.00

BH007038 SOL660CT 6.6sqm on roof kit—3 high efficiency collectors £2,000.00

BH007039 SOL603CT 6sqm on roof kit—3 standard efficiency collectors £1,575.00

On roof installation kits— plain tile roof

BH007040 SOL220PT 2.2sqm on roof kit—1 high efficiency collector £700.00

BH007041 SOL201PT 2sqm on roof kit—1 standard efficiency collector £550.00

BH007042 SOL440PT 4.4sqm on roof kit—2 high efficiency collectors £1,350.00

BH007043 SOL402PT 4sqm on roof kit—2 standard efficiency collectors £1,050.00

BH007044 SOL660PT 6.6sqm on roof kit—3 high efficiency collectors £2,000.00

BH007045 SOL603PT 6sqm on roof kit—3 standard efficiency collectors £1,575.00

On roof installation kits— slate tile roof

BH007046 SOL220ST 2.2sqm on roof kit—1 high efficiency collector £700.00

BH007047 SOL201ST 2sqm on roof kit—1 standard efficiency collector £550.00

BH007048 SOL440ST 4.4sqm on roof kit—2 high efficiency collectors £1,350.00

BH007049 SOL402ST 4sqm on roof kit—2 standard efficiency collectors £1,050.00

BH007050 SOL660ST 6.6sqm on roof kit—3 high efficiency collectors £2,000.00

BH007051 SOL603ST 6sqm on roof kit—3 standard efficiency collectors £1,575.00





In roof installation kits— tile roof

BH007052 SOL220TI 2.2sqm integrated roof kit—1 high efficiency collector £760.00

BH007053 SOL220TIF 2.2sqm integrated roof kit (with flashing)—1 high efficiency collector £860.00

BH007054 SOL440TI 4.4sqm integrated roof kit—2 high efficiency collectors £1,440.00

BH007055 SOL440TIF 4.4sqm integrated roof kit (with flashing)—2 high efficiency collectors £1,540.00

BH007056 SOL660TI 6.6sqm integrated roof kit—3 high efficiency collectors £2,100.00

BH007057 SOL660TIF 6.6sqm integrated roof kit (with flashing)—3 high efficiency collectors £2,200.00

In roof installation kits— slate roof

BH007058 SOL220SI 2.2sqm integrated roof kit—1 high efficiency collector £760.00

BH007059 SOL220SIF 2.2sqm integrated roof kit (with flashing)—1 high efficiency collector £860.00

BH007060 SOL440SI 4.4sqm integrated roof kit—2 high efficiency collectors £1,440.00

BH007061 SOL440SIF 4.4sqm integrated roof kit (with flashing)—2 high efficiency collectors £1,540.00

BH007062 SOL660SI 6.6sqm integrated roof kit—3 high efficiency collectors £2,100.00

BH007063 SOL660SIF 6.6sqm integrated roof kit (with flashing)—3 high efficiency collectors £2,200.00

Flat roof / free standing kits

BH007064 SOL220F 2.2sqm free standing A-frame kit—1 high efficiency collector £700.00

BH007065 SOL201F 2sqm free standing A-frame kit—1 standard efficiency collector £550.00

BH007066 SOL440F 4.4sqm free standing A-frame kit—2 high efficiency collectors £1,350.00

BH007067 SOL402F 4sqm free standing A-frame kit—2 standard efficiency collectors £1,050.00

BH007068 SOL660F 6.6sqm free standing A-frame kit—3 high efficiency collectors £2,000.00

BH007069 SOL603F 6sqm free standing A-frame kit—3 standard efficiency collectors £1,575.00

Solar Hydraulic packs

BH007070 SOLHYPK0 Solar hydraulic pack with premium pump station £888.09

BH007071 SOLHYPK1 Solar hydraulic pack with standard pump station £650.00

BH007072 SOLHPHYPK Solar hydraulic pack with heat pump compatible pump station £1,210.48

Energy


Solar – Thermal


For more information visitwww.dimplexrenewables.co.ukand download or request a copyof the Solar Thermal brochure.



GRANT SOLAR THERMAL

The Grant Solar Thermal Range encompasses many unique components including: two alternative styles of flat plate collector

(‘Sahara’ with a bronze finish and ‘Aurora’ with an aluminium finish) multifunctional controller with LCD display and various

mounting arrangements including In-Roof, On-Roof and Flat-Roof options, both landscape and portrait. Grant Solar Pump

Station incorporates an air eliminator that allows the system to be both filled and purged of air in a single operation. Unlike

other arrangements there is no need to install an air vent on the roof and also no need for regular maintenance.

Durable weather resistant self-cleaning glass.

Self-supporting collector cage manufactured from non-corroding aluminium.

4mm low iron glass which maximises absorption and minimises reflection.

Due to their design the collectors are maintenance free.

Homogeneous total copper absorber with high selective ‘Sun-select’ coating.

Vented aluminium extruded frame, which protects internal components from weathering.

Unique serpentine pipe configuration ensuring maximum heat transfer and no air locks.

35mm mineral wool thermal installation at the back of the absorber surface.

Energy


Solar – Thermal

Pressure relief valve 6 bar

Boiler primaryflow and return

Solar flowand return

Solar collector temperature sensor

Air eliminator with manualbleed screw

Controller to pump

Return ball valve

Pump

Solar cylinder temperature sensor

Flow ball valve

Expansionvessel

Flow indicator 2-8 L/min

Filling flushing valvesReturn ball valve

Power to controller

The Grant CombiSOLWith solar thermal systems increasing in popularity in the UK and many new and existing heating installations involving mains

pressure combination boilers, a simple, cost effective solution to integrate these two technologies is a must. The Grant

CombiSOL is designed to do just that, and is uniquely compatible with most combi boilers and fuel types. It works by

accurately controling the outlet temperature of stored secondary hot water produced by a solar thermal system, directing the

flow either straight to the hot water outlet, or via the combi boiler to the same outlet with a seamless changeover. There are

additionally minimal temperature fluctuations at the taps.

Complete SolutionsTo make life as straight forward as possible, Grant have introduced a series of individually numbered kits that meet most

installation requirements. These simply consist of either Aurora or Sahara collectors, a roof mounting system, expansion vessel,

pump station, control panel, pipe connections and solar fluid - all of which can be installed in just a few days.

System SizeGrant Solar Collectors have a total area of 2.32m2. As a rule of thumb, when sizing a system, you should allow 1.0-1.3m2 of

collector area, per person. Cylinder requirements are 50-60 litres capacity per m2 of collector area. To simplify this, for a

2-Collector system of 4.64m2, you would require a cylinder of approximately 200 litres. This would be sufficient for 4 people and

satisfy up to 70% of your hot water demand per annum.

GRANT SOLAR THERMAL

GRANT SAHARA SOLAR KITS

GSSKIT1: 2 Collector Bronze On-Roof

2 x Solar Collectors (Bronze), Connection Kit Flow and Return, Connection Kit Collector to Collector, 2 Collector Portrait Rails and Fixings, 6 x RoofAnchors, Pump Station, Controller (GSDI), 30 Litre Solar Fluid, 18 Litre Expansion Vessel, Expansion Vessel Pipe Connections, Expansion VesselBracket and Valve

CODE EXC VAT

H1203708 £2,987.00

GSSKIT2: 3 Collector Bronze On-Roof

3 x Solar Collectors (Bronze), Connection Kit Flow and Return, 2 x Connection Kit Collector to Collector, 2 Collector Portrait Rails and Fixings, 1Collector on Roof Extension Kit, 8 x Roof Anchors, Pump Station, Controller (GSDI), 40 Litre Solar Fluid, 18 Litre Expansion Vessel, ExpansionVessel Pipe Connections, Expansion Vessel Bracket and Valve, Collector Extension Connection Kit

CODE EXC VAT

H1203709 £4,060.00

GSSKIT3: 2 Collector Bronze In-Roof (Tile)

2 x Solar Collectors (Bronze), Connection Kit Flow and Return, Connection Kit Collector to Collector, 2 x Collector Portrait In-Roof Kit - Tile Roof,Pump Station, Controller (GSDI), 30 Litre Solar Fluid, 18 Litre Expansion Vessel, Expansion Vessel Pipe Connections, Expansion Vessel Bracket and Valve

CODE EXC VAT

H1203710 £3,330.00

GSSKIT4: 3 Collector Bronze In-Roof (Tile)

3 x Solar Collectors (Bronze), Connection Kit Flow and Return, 2 x Connection Kit Collector to Collector, 2 x Collector Portrait In-Roof Kit, 1 xCollector In-Roof Extension Kit, Pump Station, Controller (GSDI), 40 Litre Solar Fluid, 18 Litre Expansion Vessel, Expansion Vessel PipeConnections, Expansion Vessel Bracket and Valve

CODE EXC VAT

H1203711 £4,575.00

GSSKIT5: 2 Collector Bronze Flat-Roof

2 x Solar Collectors (Bronze), Connection Kit Flow and Return, Connection Kit Collector to Collector, 2 Collector Portrait Rails and Fixings, 2Collector Flat-Roof Kit, 2 CoIlector Flat Roof Cruciform, Pump Station, Controller (GSDI), 30 Litre Solar Fluid, 18 Litre Expansion Vessel,Expansion Vessel Pipe Connections, Expansion Vessel Bracket and Valve

CODE EXC VAT

H1203712 £3,110.00

GSSKIT 1 SOLAR COLLECTORS ON-ROOF INSTALLATION



SOLAR COLLECTOR FLAT ROOF

GRANT AURORACOLLECTOR COMBISOL

GSAKIT0: 1 Collector Aluminium On-Roof

1 x Solar Collectors (Aluminium), Connection Kit Flow and Return, 1 x Collector Portrait Rails and Fixings, 4 x Roof Anchors, Pump Station,

Controller (GSDI), 20 litre Solar Fluid, 18 litre Expansion Vessel, Expansion Vessel Pipe Connections, Expansion Vessel Bracket and Valve

CODE EXC VAT

H1204239 £1,944.00


2 x Solar Collectors (Aluminium), Connection Kit Flow and Return, 1 x Connection Kit Collector to Collector, 2 Collector Portrait Rails and

Fixings, 6 x Roof Anchors, Pump Station, Controller (GSDI), 30 litre Solar Fluid, 18 litre Expansion Vessel, Expansion Vessel Pipe Connections,

Expansion Vessel Bracket and Valve

CODE EXC VAT

H1203703 £2,843.00


3 x Solar Collectors (Aluminium), Connection Kit Flow and Return, 2 x Connection Kit Collector to Collector, 2 x Collector Portrait In-Roof Kit, 1 x Collector

On-Roof Extension Kit, 8 x Roof Anchors, Pump Station, Controller (GSDI), 40 Litre Solar Fluid, 18 Litre Expansion Vessel, Expansion Vessel Pipe Connections,

Expansion Vessel Bracket and Valve, Collector Extension Connection Kit

CODE EXC VAT

H1203704 £3,818.00

GSAKIT5: 2 Collector Aluminium Flat-Roof

2 x Solar Collectors (Aluminium), Connection Kit Flow and Return, Connection Kit Collector to Collector, 2 x Collector Portrait Rails and Fixings, 2 x

Collector Flat Roof Kit, 2 x Collector Flat Roof Crucifrom, Pump Station, Controller (GSDI), 30 Litre Solar Fluid, 18 Litre Expansion Vessel, Expansion

Vessel Pipe Connections, Expansion Vessel Bracket and Valve

CODE EXC VAT

H1203707 £2,966.00

COMSOL3: Solar Solution for Combi Boilers

Grant Combisol Kit

CODE EXC VAT

H1204243 £235.00

Energy


Solar – Thermal

GRANT AURORA SOLAR KITS

RM SOLAR S-CLASS10 COLLECTOR

The standard S-Class 10 panel sits at the head of the collectors in this range and

is one of the most popular panels sold in the market place. It links both quality,

performance, and guarantee (10 years) with a cost effective sales price due to

RM’s aggressive buying policy and low overheads.

The panel is a popular choice on new build as well as existing domestic

installations and because the panels can be fitted 10 in series, they are also

suitable for use in commercial applications and swimming pools. Like the rest of

the S-Class10 range this panel can be fitted to all roof types, flat or pitched and

we even have an A Frame available for gable end wall mounting.

Also available are full in roof flashing kits to suit all tile types.

CODE DESCRIPTION EXC VATH1204289 One Panel On Roof Kit £1,340.00H1204278 One Panel In Roof Fixing Kit Only £560.00H1204290 Two Panel On Roof Kit £1,810.00H1204279 Two Panel In Roof Fixing Kit Only £600.00H1204291 Three Panel On Roof Kit £2,600.00H1204280 Three Panel In Roof Fixing Kit Only £790.00

The S-Class10 range is also available in a Horizontal format, please ask for details.

RM SOLAR S-CLASS20 COLLECTOR

The RM Solar S-Class20 panel is a world leading, vertically mounted flat plate

collector. This panel has been constructed using top quality materials and

manufacturing techniques which result in an unbeatable 20 year guarantee.

This guarantee offers any customer many benefits, peace of mind, real payback

opportunities, as most panels on the market only have a 10 year guarantee or

less. The S-Class20 also has a much smaller carbon footprint thanks to its

longevity of life.

The panels are designed to have a 35 year life span.

The S Class 20 panel has been designed as a domestic solar panel, capable of

being linked up to three in series. The panels can either be set on-roof or using

the RM Solar flashing kit, in-roof.

CODE DESCRIPTION EXC VATH1204275 One Panel On Roof Kit £1,660.00 H1204278 One Panel In Roof Fixing Kit Only £560.00H1204276 Two Panel On Roof Kit £2,415.00 H1204279 Two Panel In Roof Fixing Kit Only £600.00H1204277 Three Panel On Roof Kit £3,440.00 H1204280 Three Panel In Roof Fixing Kit Only £790.00

Standard Kit Contents – For S-Class10 and S-Class20Panel(s), Installation / Extension Kit(s), Roof Mounting (of your choice),

Double Pump Station, Solar Controller, Expansion Vessel, and Glycol.

RMSOLAR S-CLASS20

RMSOLAR S-CLASS10



Energy


Solar – Thermal

RM SOLAR COMBI KONVERTER

RM Solar’s new patented combi boiler system offers to do what many manufacturers have been trying to do for some time now.

Traditionally using solar with a combi boiler relied on the boiler accepting pre-heated water, however many of the new and existing

boilers do not make allowances for this.

When using the new RM Solar Combi Konverter system this problem no longer becomes an issue, using a unique purpose designed

cylinder and advanced controls, solar can be integrated safely into this type of system allowing the homeowner to benefit from free

hot water. All Combi Konverter kits include and unvented hot water cylinder.

The Combi Konverter offers users the following benefits:

• Fully compatible with new & exisiting combi boilers

• Solar compatible combi is not required

• Unique solar cylinder which offers:

• Improved pressure and flow rates

• Immersion backup

• Improved system performance

• Fast Response times

• Versatile locating of cylinder

• Quiet Operation

• Unique patent design

• 20 Year panel warranty and 25 year cylinder warranty

CODE DESCRIPTION EXC VAT

H1204273 One Panel Kit On Roof Combi Konverter £2,920.00

H1204274 Two Panel Kit On Roof Combi Konverter £3,620.00

SOLAR HOT WATER SET SWS

Solar thermal technology converts solar energyinto snug warmth: cheaply, efficiently and securely.All it needs to do this is the sun’s rays and sophisticated

technology from TiSUN. A system with collectors

measuring 4 to 6 m2 is enough to supply an average

four-person household with hot water. This instantly

covers 25% of our energy requirement. And you can

also reduce the remaining 75% needed for heating by

about 60% – providing you support your heating

system with solar energy.



SOLAR SETS WITH 2 m2 OR 2.5 m COLLECTORSAND STAINLESS STEEL TWIN-COIL DHW CYLINDER

1

2

34

Collector

Solarstation

Hot water

Thermostatic mixing valve

OilGasBiomass

Cold water mains

Hot water tank

Components included in set

Module collector FM-S 2,0 / 2,5 (vertical) or FM-W 2,0 / 2,5 (horizontal)without collector mounting components.

� Simple installation of collectors with different mounting sets for in-roof, on-roof, parallel and

free-standing installation

� Highly efficient with test certificates

� Very robust and resilient construction

Solar Cylinder BS-SSP-2R� Cylinder of high quality duplex stainless steel with two coils, one solar coil in the lowest, cold zone and a large surface

area for rapid water heating, as well as one coil for secondary heating units in the upper zone

� Solar cylinder with minimum heat losses and rapid installation

� 3 kW Immersion heater

� Includes unvented kit with all parts according to G3 Regulations

Thermostatic mixing valve BMV

SFRE 25 solar station for wall mountingwith single-loop control unit, solar expansion tank and suitable connection set.

� Single-line solar station and control unit for wall and tank mounting

� Attractive, compact TiSUN® EPP heat insulation jacket with safety group insulation

� Single-loop control unit with temperature difference control and additional thermostat control

� Highly reliable operation and long service life

SSR 25 solar station for wall mountingwith dual-loop control unit, solar expansion tank and suitable connection set.

� Dual-line solar station and control unit for wall and tank mounting


� Dual-loop control unit with integrated energy balancing (heat quantity metering)


Antifreeze concentrate

1

2

3

4a

4b

+

++

+

or

Collector installation and piping components not included

Energy


Solar – Thermal


SOLAR SETS WITH 2 m2 COLLECTORS AND STAINLESS STEEL TWIN-COIL DHW CYLINDER

Connectivity

FM-S (vertical)

max. 6 adjacent collectorsmax. 6 collectors in total

Note: Module collectors can be fed fromboth sides!!

max. 6 collectors per row

FM-W (horizontal)

SetSWS-UK 2,0S/BS2 180/SFRE

SWS-UK 2,0W/BS2 180/SFRE

SWS-UK 4,0S/BS2 250/SFRE




Recommended size(Household members)

up to 3 persons up to 3 persons up to 4 persons up to 4 persons up to 5 persons up to 5 persons

Collectors

1 x FM-S 2,02,00m2

1 x FM-W 2,02,00m2

2 x FM-S 2,04,00m2

2 x FM-W 2,04,00m2

3 x FM-S 2,06,00m2

3 x FM-W 2,06,00m2

Tank incl. insulation BS-SSP-2R 180 BS-SSP-2R 180 BS-SSP-2R 250 BS-SSP-2R 250 BS-SSP-2R 400 BS-SSP-2R 400

Solar Station SFRE 25 SFRE 25 SFRE 25 SFRE 25 SFRE 25 SFRE 25

Expansion Vessel SAG 18R SAG 18R SAG 18R SAG 18R SAG 25R SAG 25R

Heat quantity metering – – – – – –

Accessories

Antifreezeconcentrate/litres

11 11 11 11 16 16

Thermostatic mixingvalve BMV

x x x x x x

Installation kit for DHWcylinders

x x x x x x


Price Ex VAT £2,916.00 £2,935.00 £3,567.00 £3,609.00 £4,451.00 £4,516.00

Optional accessories

Spiral piping set SVS 15/18 SVS 15/18 SVS 15/18 SVS 15/18 SVS 15/18 SVS 15/18

SetSWS-UK 2,0S/BS2 180/SSR

SWS-UK 2,0W/BS2 180/SSR

SWS-UK 4,0S/BS2 250/SSR






Collectors

1 x FM-S 2,02,00m2

1 x FM-W 2,02,00m2

2 x FM-S 2,04,00m2

2 x FM-W 2,04,00m2

3 x FM-S 2,06,00m2

3 x FM-W 2,06,00m2


Solar Station SSR 25 SSR 25 SSR 25 SSR 25 SSR 25 SSR 25



Accessories


11 11 11 11 16 16


x x x x x x


x x x x x x


Price Ex VAT £3,200.00 £3,223.00 £3,851.00 £3,897.00 £4,734.00 £4,804.00






SOLAR SETS WITH 2,5 m2 COLLECTORS AND STAINLESS STEEL TWIN-COIL DHW CYLINDER

SetSWS-UK 2,5S/BS2 180/SFRE








Collectors

1 x FM-S 2,52,55m2

1 x FM-W 2,52,55m2

2 x FM-S 2,55,1m2

2 x FM-W 2,55,1m2

3 x FM-S 2,57,65m2

3 x FM-W 2,57,65m2





Accessories


11 11 11 11 16 16


x x x x x x


x x x x x x


Price Ex VAT £3,014.00 £3,037.00 £3,776.00 £3,827.00 £4,743.00 £4,823.00



SetSWS-UK 2,5S/BS2 180/SSR








Collectors

1 x FM-S 2,52,55m2

1 x FM-W 2,52,55m2

2 x FM-S 2,555,00m2

2 x FM-W 2,555,00m2

3 x FM-S 2,557,65m2

3 x FM-W 2,557,65m2


Solar Station SSR 25 SSR 25 SSR 25 SSR 25 SSR 25 SSR 25



Accessories


11 11 11 11 16 16


x x x x x x


x x x x x x


Price Ex VAT £3,297.00 £3,325.00 £4,060.00 £4,116.00 £5,027.00 £5,106.00



Solar thermal systems can do more than just heat domestic hot water. In modern

well-insulated buildings they can make a contribution to space heating. Our SFS

solar fresh water sets include a thermal store that allows the connection of multiple

heat sources such as gas and oil boilers, heat pumps and biomass boilers. The

unique DHW heat exchanger ensure Legionella-free domestic hot water.

Energy


Solar – Thermal

SFS SOLAR FRESH WATER SET

SetSFS 4S/FS 375

SFS 4W/FS 375

SFS 6S/FS 500

SFS 6W/FS 500

SFS 8S/FS 800

SFS 8W/FS 800


4 persons 4 persons 5 persons 5 persons 6 persons 6 persons

Collectors

2 x FM-S 2,04,00m2

2 x FM-W 2,04,00m2

3 x FM-S 2,06,00m2

3 x FM-W 2,06,00m2

4 x FM-S 2,08,00m2

4 x FM-W 2,08,00m2

Tank incl. insulation FS 375/1R FS 375/1R FS 500/1R FS 500/1R FS 800/1R FS 800/1R




Accessories


11 11 11 16 16 16


x x x x x x


Price Ex VAT £3,744.00 £3,786.00 £4,399.00 £4,488.00 £5,250.00 £5,339.00



Cylinder safety centre BSC-12I BSC-12I BSC-12I BSC-12I BSC-12I BSC-12I

SOLAR SETS WITH 2m2 COLLECTORS ANDFRESH WATER THERMAL STORE FS/1R

Components included in SSFsolar fresh water tank sets

Module collector FM-S 2,0 / 2,5 (vertical) or FM-W 2,0 / 2,5 (horizontal)without collector mounting components.

� Simple installation of collectors with different mounting sets for in-roof, on-roof, parallel and

free-standing installation

� Highly efficient with test certificates

� Very robust and resilient construction

Solar fresh water tank FS/1R, including insulation� Compact multi-functional solar tank system for domestic hot water and heating with one solar coil

� Solar exchanger in the lowest, cold zone with a very large surface area

� Hygienic domestic hot water heating thanks to special corrugated stainless-steel pipe used in a continuous process

Thermostatic mixing valve BMV

SFRE 25 solar station for wall and tank mountingwith single-loop control unit, solar expansion tank and suitable connection set.

� Single-line solar station and control unit for wall and tank mounting


� Single-loop control unit with temperature difference control and additional thermostat control


Antifreeze concentrate

1

2

3

4

+

++

+

Collector installation and piping components not included

TiSUN offers many other configurations up to 5,000 lt tanks.

Configuration of solar heating sets with module collectors (with FS fresh water tank)

SOLAR HOTWATER SYSTEM


VELUX SOLAR HOT WATER SYSTEM

An energy efficient, easy to install Solar HotWater System.• VELUX Solar Collectors integrate discreetly in the roof and blend beautifully with both traditional and modern architecture.

• Our system can provide up to 70% of the energy you need for hot water.

• The efficiency of the system is optimised by roof pitch, orientation and geographical location.

• Minimum roof pitch 15˚

• Comes as a single package with all components that fit perfectly together.

• The solar cylinder is compatible with most types of auxiliary heating, such as gas, oil or solid fuel boilers.

• VELUX Solar Collectors can also be installed in a number of combinations or with VELUX Roof Windows, using the same unique VELUX Flashing system.

• Contact VELUX for further information.

New

CLIS064000

CLIM084000

CLIS084000

CLIU124000

78 114 134

Size (cm) width

Size

(cm

) height

cm

118

140

180

Solar Collector sizesThe Solar Hot Water System is highly adaptable to specificrequirements. There are four different collector sizes.

Collector code Gross area*

CLI M08 4000 1.16m2

CLI S06 4000 1.42m2

Collector code Gross area*

CLI S08 4000 1.68m2

CLI U12 4000 2.51m2

Vented Unvented System system system (excluding cylinder)

Solar collectors � � �

Thermostat � � �

Flexible flow and return pipes (10m each) � � �

Connection pipes � � �

Underfelt sealing collars � � �

Micro air bubble separator � � �

Solar cylinder � �

Factory fitted temperature and pressure release valve �

Factory fitted dual control cutout thermostat � �

Two motorised valves �

Pressure reducing valve �

Check valve �

Expansion valve �

Tundish �

Expansion vessel(s) � � �

Safety mixer valve � �

Glycol � � �

Control unit/pump station � � �

System ComponentsThe VELUX Solar Hot Water Systems come with the below components.

To hot tap

Cold in

Collector(s)

Water tank

Hot watercylinder

Boiler

Hot watercylinder

To hot tap

Mains cold in

Boiler

Collector(s)

Unvented System

Vented System

*Measured from the external outer edges of the collector

Energy


Solar – Thermal

For more details regardingthe VELUX Solar Hot WaterSystem visitwww.velux.co.uk/solar

2 bed house 3 bed house 4 bed house 5 bed house

2/3 person 180 litre cylinder 3/4 person 280 litre cylinder 4/5 person 280 litre cylinder 5/6 person 375 litre cylinder

U12 option 1 x U12 2 x U12 2 x U12 3 x U12

Vented cylinder system BB020327 £2,235.00 BB020330 £3,035.00 BB020333 £3,035.00 BB020336 £3,735.00

Unvented cylinder system BB020328 £2,535.00 BB020331 £3,485.00 BB020334 £3,485.00 BB020337 £4,135.00

System excluding cylinder BB020329 £1,550.00 BB020332 £2,125.00 BB020335 £2,125.00 BB020338 £2,725.00

Flashings

Flashings for slate

(up to 8mm thick) BB020375 £60.00 BB020377 £192.00 BB020379 £192.00 BB020381 £288.00

Flashings for tile

(up to 120mm in profile) BB020376 £96.00 BB020378 £192.00 BB020380 £192.00 BB020382 £288.00

S06 option 2 x S06 3 x S06 4 x S06 5 x S06




Flashings

Flashings for slate


Flashings for tile


S08 option 2 x S08 3 x S08 4 x S08 4 x S08




Flashings

Flashings for slate


Flashings for tile


M08 option 3 x M08 4 x M08 5 x M08 6 x M08




Flashings

Flashings for slate


Flashings for tile


Accessories

In addition to the complete package, VELUX Solar Hot Water Systems can also be supplied with a number of optional extras.

This will allow you the flexibility to meet any unique requirements of your development.

BB020407 Additional length flexible flow and return pipe (5m) £100.00 BB020411 Connector for linking ZFM pipes £5.00

BB020408 Additional length flexible flow and return pipe (10m) £160.00 BB020412 Filling pump for charging solar circuit £450.00

BB020409 Additional length flexible flow and return pipe (15m) £215.00 BB020413 Immersion heater to suit tank requirements £175.00

BB020410 Additional length flexible flow and return pipe (20m) £275.00 BB020414 Additional supply of glycol (10 litres) £50.00

All Solar Systems and Flashings have a delivery time of 2-7 days. All accessories have a delivery time of 7-10 days.

Delivery time is in working days from receipt of orders placed before 4pm.

ECOTUBE – SOLAR THERMAL KIT

What is included in the Ecotube

solar thermal kit?The kit includes everything you need to

install the solar loop for the system.

• 12 step interactive installation

CD-Rom,installation guide,

commissioning checklist, user manual

and warrantyregistration card

• Ecotube solar panel(s)

• Pumpstation and solar controller

with fixings

• Stainless steel solar flexi-pipe and

fittings

• Expansion vessel and fixing

• Heat transfer fluid

• Isolation valve, automatic air vent,

air separator, drain cock

• Panel mounting kit: pitched roof -

solar roof flashings, brackets and

bolts; flat roof - rubber pad stones

The Ecotube solar loopSolar water uses free heat from the sun

to warm domestic hot water.

Any conventional boiler or immersion

heater can be used with this system to

make the water hotter. It’s important

that the panels are mounted south

facing or you can install an Ecotube,

East/West kit. This will allow the solar

panels to absorb maximum solar energy.

SOLAR – THERMALEVACUATED TUBE


Performance*• 810kWh/panel/year

• 727kWh/m2/year

• Gas displacement - CO2/ year 153.9kg

• Electricity displacement - CO2/ year 348.3kg

• Number of tubes - 6

• Diameter of tube - 100mm

• Solar Keymark (reg no.) 011-7S225R

• Conformance - DIN EN12975

• Microgeneration Certification Scheme - NIC1162

*outputs vary according to weather conditions

Sizing the System

Ecotube Solar Thermal Kit content based on a 1 panel kit:

Pump Station with Controller, 10m Solar hose, Solar Hose Fixing Brackets, Solar Heat Transfer Fluid, Solar Hose Fittings,

18ltr Expansion Vessel, Mounting Kit, 10ltr Antifreeze, Isolation Value, Automatic Air Vent, Air Separator, Solar Roof Flashing &

Mounting Brackets (for Pitched Roof) or Rubber Padstones (for Flat Roof), 22mm x 4m HT insulation, Copper Fitting Pack,

Digital Solar Display.

1 Panel KitCODE EXC VAT

BH004297 £2,100.00

2 Panel KitCODE EXC VAT

BH004298 £2,900.00

Energy


Solar Thermal

ECOTUBE – SOLAR THERMAL KIT

Panel SpecificationsDimension: 2206 x 720 x 135mm

Weight: Empty 40kg/Filled 42kg

Net Aperture Area: 1.114m2

Net Absorber Area: 1.069m2

SOLAR CYLINDERS

Solar systems can work on either Open Vented or Unvented

systems providing that the cylinder has a twin coil, top coil

normal system bottom coil for Solar.

Cylinder Selection

The choice of capacity for traditional cylinders is based on the

hot water requirements of the home.

With Solar Cylinders the usable hot water will vary due to a

number of factors such as the time of year, weather

conditions and the siting of the panels. For this reason, when

choosing a solar cylinder you should ensure that sufficient

usable hot water will be available during the winter months

where solar gain is at its lowest.

For example a non solar home of 3 inhabitants with a bath

and shower would normally require a 145ltr indirect cylinder.

However in line with Clear Skies* requirements at least 30%

of the cylinder capacity must be dedicated to solar only,

therefore the same home with a solar system fitted would

require a 210ltr indirect solar cylinder, which would provide

143ltrs of hot water during periods of low no solar gain.

For guidance please refer to the table below.

Please bear in mind that some applications may require larger

capacity or higher recovery rates, therefore it is vitally

important to calculate the hot water before selecting the

cylinder capacity.

SOLAR CYLINDERS


Figures are for guidance only and are based on BS6700 recommendations

bedsit 190ltr 190ltr

1 bed 1 bath + shower 190ltr 190ltr



4 bed 1 bath + shower 210/250ltr 250/300ltr

4-5 bed 2 bath + shower 250/300ltr 300ltr

4-5 bed 3 bath + shower 300ltr N/A

Capacity Capacity Application Indirect Direct

Twin Coil Open Vented CylindersReplace existing open vent cylinders

Twin Coil Stainless Unvented CylindersNew build or system upgrade

Energy


Solar Cylinders

SOLAR OPEN VENTED CYLINDERS

CODE MODEL DESCRIPTION LITRE HEIGHT WIDTH EXC VAT

Heatrae Megaflo Eco Vented Solar Cylinders (Indirect)

BH005272 190Si Stainless Twin Coil 190L 1401 550 £1,648.15




Heatrae Megaflo Eco Vented Solar Cylinders (Direct)

BH005276 170SDD Stainless Twin Coil 170L 1245 550 £1,343.90


BH005278 26 0SDD Stainless Twin Coil 260L 1795 550 £1,547.36


RM Solar Copper Vented Twin Coiled Solar Units

BH003754 Twin Coil 180L 1375 450 £645.00

BH003755 Twin Coil 210L 1500 450 £732.00

BH003756 Twin Coil 250L 1800 450 £872.00

BH003757 Twin Coil 300L 1800 500 £1,090.00

HEATRAE MEGAFLO SOLAR CYLINDER RM SOLAR COPPER VENTED CYLINDER

SOLAR CYLINDERS


CODE MODEL DESCRIPTION TYPE LITRE HEIGHT WIDTH EXC VAT

Dimplex EC-Eau Solar Unvented Cylinders (Direct)

BH007073 ECSd175ST-580 Single Coil Direct 175L 1280 580 £950.00

BH007074 ECSd210ST-580 Single Coil Direct 210L 1504 580 £975.00

BH007075 ECSd250ST-580 Single Coil Direct 250L 1750 580 £1,050.00

BH007076 ECSd300ST-580 Single Coil Direct 300L 2080 580 £1,125.00

Dimplex EC-Eau Solar Unvented Cylinders (Indirect)

BH007077 ECSi175ST-580 Twin Coil Indirect 175L 1280 580 £800.00



BH007080 ECSi300ST-580 Twin Coil Indirect 300L 2080 580 £1,000.00

GAH Dualstream Twin Coil Solar Unvented Cylinders (Indirect)

H1204404 TDIC300/210 Twin Coil Indirect 210L 1495 505 £2,570.00


BH005316 TDIC300/250 Twin Coil Indirect 250L 1555 560 £2,650.00

BH005317 TDIC500/250 Twin Coil Indirect 250L 1555 560 £2,850.00



Grant Duowave Solar Single-Coil Cylinders (Direct)

BH000976 GDUO/DIR170 Single Coil Direct 170L 1075 580 £1,173.00





Grant Duowave Solar Twin-Coil Cylinders (Indirect)

BH000981 GDUO/IND170 Twin Coil Indirect 170L 1075 580 £1,333.00

H1203978 GDUO/IND200 Twin Coil Indirect 200L 1230 580 £1,380.00





SOLAR UNVENTED CYLINDERS

DIMPLEX EC-EAU GRANT DUOWAVECYLINDER

GAH DUALSTREAM

Energy


Solar Cylinders

SANTON PREMIER PLUSSTELFLOW TWIN COILED

CODE MODEL DESCRIPTION TYPE LITRE HEIGHT WIDTH EXC VAT

Heatrae Megaflo Eco Unvented Solar Cylinders (Indirect)

BH005293 HE2 190Si Stainless Twin Coil Indirect 190L 1401 550 £1,818.75




Heatrae Megaflo Unvented Eco Solar Cylinders (Direct)

BH005307 HE2 170SDD Stainless Twin Coil Direct 170L 1245 550 £1,651.73




RM Solar Stelflow Stainless Steel Twin Coiled Unvented Units (Indirect)

H1204578 Stainless Twin Coil Indirect 150L 1093 550 £1,008.15





RM Solar Stelflow Stainless Steel Twin Coiled Unvented Units (Direct)

BH005214 Stainless Twin Coil Indirect 150L 1102 545 £959.25

BH005215 Stainless Twin Coil Indirect 180L 1290 545 £1,002.95




Santon Premier Plus Solar Cylinders (Indirect)

H1603713 PP190B Stainless Twin Coil Indirect 190L 1401 550 £1,167.61




Santon Premier Plus Solar Cylinders (Direct)

H1603717 PP170E Stainless Twin Coil Direct 170L 1245 550 £944.00

H1603718 PP210E Stainless Twin Coil Direct 210L 1502 550 £984.59

H1603719 PP260E Stainless Twin Coil Direct 260L 1795 550 £1,092.31

H1603720 PP300E Stainless Twin Coil Direct 300L 2067 550 £1,199.17

SOLAR UNVENTED CYLINDERS

HEATRAE MEGAFLO ECO

INTAECO SOLAR HEATING CONTROLS

SOLAR PLUS EXPANSIONVESSEL EXPANSION VESSEL SOLARLOGIC SL2 PUMP

STATION

SOLAR HEATINGCONTROLS



Solar-plus CE Expansion Vessels For Solar Heating Systems

BH000111 2001207 12 litre Solar Plus Vessel £45.50






Solar Expansion Vessels - Hy-Pro Economical Solar Vessels - OEM 110C peak 130C (Short Duration)BH003778 ECSHY1207 12 litre Hy-pro Solar Vessel £37.50

BH003779 ECSHY1808 18 litre Hy-pro Solar Vessel £41.72

BH003780 ECSHY2506 24 litre Hy-pro Solar Vessel £47.32

Solar Expansion Vessels CONNECTION KITSBH003769 SOVK-A200 Vessel Connection KIT A200 (Bag) £41.70

BH000124 SOVK-M1 Vessel Connection KIT M1 - Manual £41.00

BH000125 SOVK-ZSV1 ZSV 3/4” Vessel manual isolation connection VALVE ONLY £14.62

Solar Components

BH000126 SOLRV36 1/2" 6 Bar Solar Safety Valve £11.50

BH000127 SOLAIR31 Solar High Temperature Automatic Air Vent £22.82

H1603936 300284 Isolating Valve For Solar Auto Airvent (3/8" M x F) £11.49

BH003771 SOLDV001 1/2" Solar Drain or Fill Valve Max Press 16 Bar Max Temp 180ºC £8.37

Solar Pump Stations

BH003763 SL1-PG6022 Solarlogic SL1 Single Line 15/6 Pump, 2-12Ltr/min Regulation 22 x 22 £247.50

BH003764 SL2-PG6222 Solarlogic SL2 Twin Line 15/6 Pump, 2-12Ltr/min Regulation 22 x 22 £291.16

BH004860 SL10-PS022 Solarlogic Maxi SL10 twin line 15/6 pump, 2-12ltr/min regulation 22 x 22 £334.86

BH003765 IE1-CPS022 Solarlogic Maxi IE1 Twin Line 15/6 Pump, 2-12ltr/min Regulation 22 x 22 £510.74

Solar Pump Stations

BH003758 SRA SR 001 ALT A Solarlogic Multi Function Solar Controller £175.88

BH004861 SOPR004 PT1000 Low Temperature Sensor (for optional 4th input operation) £15.00

BH004862 SR112.BS4 Intaeco BS4 replacement system controller £205.50

BH000131 9032.89.82 Temperature Differential Switch - simple TD switch with Auto/On/Off switch £75.00

BH003760 T01MD 240v MiniEco solar TD switch £110.00

BH003761 T01-1D 12V MiniEco solar TD switch £120.00

Energy


Solar Heat Controls

TWIN WAY PIPE SV DISCHARGE TANK SOLAR MOTORISEDVALVES

INTAECO SOLAR HEATING CONTROLS


Solar stainless steel pre-insulated Pipe Packs TWIN-WAY with 14mm Insulation

BH003783 KF-AN01510 10m DN16 Annular Twin Way Pipe Pack & 4 Core Cable £247.86




Solar stainless steel pre-insulated Pipe Packs TWIN-WAY with 14mm Insulation




Solar accessories & connectors

BH000144 SF16-7PAC 3/4” FEMALE NUT/C clip/gasket – adaptor to DN16 pipe £2.34

BH000145 SF20-7PAC 1” FEMALE NUT/C clip/gasket – adaptor to DN16 pipe £2.88

BH000147 SF16-4022C 22mm Compression Coupling to MALE 3/4" - DN16 pipe £4.90

BH000146 SF16-4015C 15mm Compression Coupling to MALE 3/4" - DN16 pipe £4.80

BH003787 SF16-4022SP 22mm Pipe Spigot Connector x 3/4" MALE - DN16 pipe £4.71

BH004866 SF16-3075 3/4” brass coupling - flat face ends (DN16 pipe fitting) £5.64

BH004867 SF20-3100 1” brass coupling - flat face ends (DN20 pipe fitting) £8.48

BH004868 SF16-6075T 3/4” equal tee - flat face ends £7.18

BH003788 SFS-500CC1 Spaces - DN16 ‘C’ clips (bag of 20) £10.00

BH003789 SF16-W0020 Fibre HT gasket/seal - for 3/4”/DN16 fittings (bag of 10) £3.00

BH004869 SF20-W0030 Fibre HT gasket/seal - for 1”/DN20 fittings (bag of 10) £4.00

Eco safety valve discharge liquid recovery container with drain valve

BH003768 EVPG-550001 SV Discharge tank £73.50

Intasol Combi Solar Diverter

BH003767 555CSD1 Intasol Valve £241.32

Replacement solar circulating pumps

BH003773 ST15/6-3 eco PL9 Wilo ST 15.6 Solar circulating pump 1” male thread conns £94.00

BH004871 96705819 Grundfos UPS 15/60 Solar circulating pump 1” thread conns £183.27

Solar Motorised Valves

BH003781 SMV2430 22mm Solar 2 Port Zone Valve 5 Wire (With Auxillary Switch) £85.75

BH003782 SMV3417 22mm Solar 3 Port Diverter Valve 5 Wire (With Auxillary Switch) £103.75

Solar Seal Roof Flashings With Pipe Seals. -60º TO +240ºC

BH003792 SEA.101L Pack of 2 x Lead Roof Flashings, With Black Silicone Cones To Fit 5mm To 50mm Pipe £96.37

WOOD & PELLET BURNINGSTOVES


How do wood fuelled heating systems work?

There are two main ways of using wood to heat you home:

• A standalone stove burning logs or pellets to heat a

single room. Some can also be fitted with a back boiler to

provide water heating as well.

• A boiler burning pellets, logs or chips connected to acentral heating and hot water system.

Log burning stoves and boilers have to be filled with wood by

hand. Some pellet and chip burners use automatic fuel

feeders which refill them at regular intervals from fuel storage

units called hoppers.

The benefits of wood fuel heating

• A low carbon option: the carbon dioxide emitted when

wood fuel is burned is the same amount that was

absorbed over the previous months and years as the plant

was growing. As long as new plants continue to grow in

place of those used for fuel, the process is sustainable.

There are some carbon emissions caused by the

cultivation, manufacture and transportation of the fuel,

but as long as the fuel is sourced locally, these are much

lower than the emissions from fossil fuels.

• A good use for waste wood: burning wood can be a

convenient means of disposing of waste that might

otherwise be sent to a landfill site.

Is a wood fuelled heating system suitable for my home?

To tell if wood fuelled heating is right for you, there are a few

key questions to consider:

• Do you have enough space? You'll need a large dry

area close to the boiler to store your wood. Ideally this

should be close to where the wood is delivered to your

home to minimise the distance you have to carry it.

• Do you have a suitable flue? You need a vent which is

specifically designed for wood fuel appliances, with

sufficient air movement for proper operation of the stove.

Your existing chimney can be fitted with a lined flue,

which is relatively inexpensive.

• Can you comply with safety and building regulations?If you live in an old or unusual home this may be an issue.

For more information, see Part L of the Building

Regulations, Northern Ireland and Section 3 of the

Technical Handbooks, Scotland

• Do you live in a smokeless zone? If so then wood can

only be burnt in certain exempted appliances.

http://www.uksmokecontrolareas.co.uk/locations.php

• Do you need planning permission? You need to talk to

your local authority if your flue will extend 1m or more

above the height of your roof, or your home is in a

Conservation Area or World Heritage Site and you plan to

install a flue on the principal elevation visible from a road.

Energy


Stoves

MUCH WENLOCK CLASSIC BERRINGTON MINSTERLEY

LITTLE WENLOCK CLASSICFUSION LITTLE WENLOCK

CODE MODEL OUTPUT HEIGHT WIDTH DEPTH HEIGHT TO FLUE FLUEkW mm mm mm CENTRE OF OUTLET REQUIREMENT

REAR FLUE DIA mm EXC VAT

Fusion

H1204577 Pellet stove 4-13 1040 650 580 182 80 N/A £1,953.19

Little Wenlock Classic

H1204573 Classic se 4.7 533 400 415 440 125 Class 1 £617.02

H1204570 Classic 4.7 533 400 415 440 125 Class 1 £582.98

Little Wenlock

H1203516 Multi fuel - matt 5 535 390 380 445 125 Class 1 £531.91

Much Wenlock Classic

BH001121 Multi Fuel - Matt 5.5 700 550 480 480 150 Class 1 £1,042.55

Berrington

H1203522 Multi Fuel - Matt 8 660 697 495 446 150 Class 1 £1,357.45

H1203523 Multi Fuel - Enamelled 8 660 697 495 446 150 Class 1 £1,697.87

Ministerley (Boiler Stove)

H1204449 Wood Burning or 12 782 568 571 658 153 Class 1 £1,519.15Solid Fuel

Ludlow Stove

BH005041 Wood Burning or 6.6 583 457 426 475 125 Class 1 £719.15Solid Fuel

Stretton Inset Stove

BH005042 Wood Burning or 4.9 605 482 362 N/A 153 Class 1 £846.81Solid Fuel

AGA WOOD & PELLET BURNING STOVES

The buzzaboutBiomassboilersA carbon zero energysource that will never runout, Biomass boilers are onthe rise. Here’s why youshould consider them inyour next development.

Energy


Biomass Boilers

A truly sustainable sourceAs long as there are trees, there will be fuel for a

biomass boiler. Sourced largely from secondary wood

from sawmills, wood pellets, bark, treated and untreated

old timber and wood from fast growing plants, it should

never run out. Culmiferous fuels, such as straw, whole

grain plants and energy plants and plant oils can also be

used. As all of these products are part of the natural

cycle, it makes biomass fuel completely carbon neutral.

BIOMASS HEATINGWITH WOOD PELLETSWood Pellet Heating has been widely used

in Europe since the mid ‘90s and has

contributed greatly to helping these countries

meet their carbon reduction targets. Therefore

wood pellet heating technology is well proven

and is growing in popularity in the UK as

fossil fuel prices rise. The main advantages

associated with wood pellets over other

biomass fuels are:YOU WON’T GET AN ASHCLOUD WITH BIOMASSWood Pellets of premium quality produce as little as

0.5% ash. For example, if you use 4 tonnes of pellet

fuel per annum only 20kgs of ash is produced over the

year. And did you know the ash is a very good fertiliser

for your flower bed or garden? Another useful aspect of

this product. Fortunately there is an abundance of pellet

fuel in the UK much of which is produced from

sustainably managed UK forests. Many more pellet fuel

manufacturing plants are set to open in the near future

throughout the UK.

1. Dense and take up less space (1 tonne requires 1.8 cubic metres)

2. Readily available

3. Boilers that burn wood pellet offer high degree of automation

4. High calorific value (high energy)

5. Low ash content

6. Clean

The most advanced biomass boilers like

Woodpecker are as easy to use as an oil fired

boiler i.e they have automatic cleaning,

auto de-ashing and automatic filling of pellet

fuel. The boilers are controlled in much the

same way as your existing gas or oil

fired boiler.

Pellet fuel particularly if purchased in Bulk can

be up to 40% cheaper than oil.

Bagged pellet fuel is more

expensive but should

still compare

favourably with

oil prices.

ons co k 100 / 101

heaper than oil.

uel is more

hould

Self Cleaning Woodpecker BoilerFeatures:• Automatic self cleaning burner and heatexchanger

• Superb 94% efficiency (EN14785)• Easy to use LCD controller• Low fuel warning sensor• Fully automated burner• 5 steps of power modulation• Low maintenance• 110kg pellet hopper• Pump management system

Cosyman Outdoor Woodpecker BoilerAdditional features:• Weatherproof case• Space saving - this boiler can be locatedaway from your house

• Frost protection• Low pellet level sensor and externalwarning beacon

WOODPECKER BIOMASS BOILERS

WOODPECKER BIOMASS BOILERS

CODE DESCRIPTION DIMENSIONS HxWxDmm WEIGHT (kg) TAPPINGS WATER CONTENT (litres) EXC VAT

BH004893 Self Cleaning 15KW 1155 x 1155 x 995mm 280kg 1" 35L £7,617.00



BH004898 Cosyman 15KW 1165 x 1165 x 1005mm 295kg 1" 35L £8,078.00

BH004899 Cosyman 25KW 1165 x 1165 x 1005mm 350kg 1" 40L £8,528.00

BIOMASS BOILERS


Boilers can only be installed by a Certified Woodpecker / MCS Accredited Installer. A commissioning fee of £275 is also applicable.

Energy


Biomass Boilers

The Fillomatic’s Technical Features in additionto the Woodpecker Boiler

• Can transport pellets from up to 35 metres• Quietness <70 dB• Daily, Weekly and Weekend Programmer• LCD Controller with Graphic Display ofentire Pellet Storage/Transportation system

• Uses leading manufacturer of vacuummotor technology

• Independent clean cooling air for motorwindings ensures longer life

• Delivers up to 3kgs per minute run time• Fills mini hopper before shutting down fornight slumber

• Optional Low Level Fuel warning lightlinked to external Bulk Store

WOODPECKER ‘FILLOMATIC’

WOODPECKER FILLOMATIC BIOMASS BOILERS

CODE DESCRIPTION DIMENSIONS HxWxDmm WEIGHT (kg) TAPPINGS WATER CONTENT (litres) EXC VAT

BH004896 Fillomatic 25KW 1650 x 1485 x 995mm 375kg 1" 40L £10,388.00

BH004897 Fillomatic 45KW 1765 x 1550 x 995mm 535kg 1" 60L £12,273.00

Boilers can only be installed by a Certified Woodpecker / MCS Accredited Installer. A commissioning fee of £275 is also applicable.


The compulsory sale of low energy lightingthrough all stockists, trade and domestic, oncecurrent stocks of traditional bulbs areexhausted, has been a controversial move.There were initial concerns about their safetybecause of the low levels of mercury theycontained and also protest from peopleconcerned about the lower level of light theygave out. Despite these concerns thegovernment’s plan to only allow the sale of lowenergy light bulbs has effectively been realised.

The future’sbrighter

Energy


Low Energy Lighting

RIDGEONS RECOMMENDS

If you’re planning a development fromthe ground up, get someone in early to

talk about lighting. So much can be donewith lighting to transform the look and feel of a propertythat the planning stage has become crucial. It’s no longerenough to pop a few wall lights in. Good lighting canmake all the difference to the finished product.

TIME TO GET CREATIVEThis move has given our industry an opportunity to think

and plan more creative lighting installations. Using low

energy bulbs and LED lights makes it possible to create

fantastically modern installations and add a real wow

factor to a home as well as reduce the energy costs from

traditional bulbs. More and more low energy lights are

available now and their performance has improved since

the initial protests about their introduction as the industry

standard form of lighting.

SCOOP UP THE SUNOne product available makes

the most of the sun’s natural

light during the day and makes

an interesting feature in a new

build or extended property.

Sun scoops gather natural

sunlight and reflect it back

into the room, giving a light,

airy feel and of course, no

electricity is required.

HOW LOWCAN YOU GO....Fitting low energy light bulbs is proven to save

the homeowner money on their electricity bill.

Even though the intial outlay is more, they can

last up to 12 times longer, making them

extremely cost effective. Quality improvements

in the last few years will also help encourange

more home owners to choose low energy,

now they are brighter quicker and available

for dimmer switches. Fitting them into your

development as standard also helps you achieve

Level 3 of the Code for Sustainable Homes.

Three main types ofenergy light bulbs:

Compact flourescent lamps (CFLs) -

the most common energy saving light

bulbs. They come in various shapes with

screw and bayonet fittings

Energy saving halogen light bulbs - a

good option if you have halogen lights

already installed on the property as they

consume around 30% less electricity than

standard halogen bulbs.

LED Lights - these have progressed

rapidly in recent years and can now be

used to replace existing halogen spotlights.

ENERGY SAVER GOLFENERGY SAVER REFLECTORENERGY SAVER GLS

LOW ENERGYLIGHTING


CODE MODEL WATT CAP FINISH/COLOUR AVE. HOURS RATED LAMP SIZE EXC VAT (EACH)

Energy Saver GLS

BE000345 S5158 9 BC(B22) White (3500K) 10000 54x112 £4.49

BE000346 S976 13 BC(B22) White (3500K) 10000 60x106 £4.49

BE000347 S977 13 ES(E27) White (3500K) 10000 60x106 £4.49

BE000348 S978 20 BC(B22) White (3500K) 10000 65x154 £4.49

Energy Saver Reflector

BE000349 S999 9 SES(E14) White (3500K) 10000 50x100 £5.49

BE000350 S997 11 ES(E27) White (3500K) 10000 63x110 £5.49

BE000351 S4672 15 ES(E27) White (3500K) 10000 80x132 £5.49

Energy Saver Golf

BE000352 S4673 7 BC(B22) White (3500K) 10000 45x80 £5.25

BE000353 S980 7 SES(E14) White (3500K) 10000 45x80 £5.25

Energy Saver Spiral

BE000354 S5204 7 BC(B22) White (3500K) 10000 35x108 £4.25

BE000355 S5205 7 SES(E14) White (3500K) 10000 35x108 £4.25

BE000356 S5206 9 BC(B22) White (3500K) 10000 38x102 £4.25

BE000357 S5207 9 SES(E14) White (3500K) 10000 38x102 £4.25

BE000358 S983 11 BC(B22) White (3500K) 10000 38x105 £4.25

BE000359 S985 15 BC(B22) White (3500K) 10000 38x114 £4.25

BE000360 S986 15 ES(E27) White (3500K) 10000 38x114 £4.25

BE000361 S987 20 BC(B22) White (3500K) 10000 48x127 £4.25

BE000362 S988 20 ES(E27) White (3500K) 10000 48x127 £4.25

Energy Saver GU10

BE000363 S982 9 GU10 White (3500K) 8000 50x56 £8.75

BE000364 S981 11 GU10 White (3500K) 8000 50x78 £8.75

ENERGY SAVING LIGHT BULBS

ENERGY SAVER CANDLE T8 FLUORESCENT TUBESENERGY SAVER SPIRAL

Energy


Low Energy Lighting

ENERGY SAVING LIGHT BULBS

CODE MODEL WATT CAP FINISH/COLOUR AVE. HOURS RATED LAMP SIZE EXC VAT (EACH)

Energy Saver 2 D Lamps

BE000365 S710 16 2 PIN White (3500K) 10000 141x138x27.5 £3.99

BE000366 S711 16 4 PIN White (3500K) 10000 141x138x27.5 £3.99

BE000367 S712 28 2 PIN White (3500K) 10000 207x205x33 £3.99

BE000368 S713 28 4 PIN White (3500K) 10000 207x205x33 £3.99

BE000369 S714 38 4 PIN White (3500K) 10000 207x205x33 £3.99

BE000370 S715 55 4 PIN Daylight (6400K) 10000 207x205x33 £8.49

Energy Saver Candle

BE000371 S972 7 SES(E14) White (3500K) 10000 37x105 £4.25

BE000372 S967 11 BC(B22) White (3500K) 10000 43x133 £4.25

T5 Fluorescent Tubes

BE000373 S871 8 G5 C.White (4000K) 20000 16x305 £1.75

BE000374 S857 13 G5 C.White (4000K) 20000 16x533 £1.75

BE000375 S5039 21 G5 C.White (4000K) 20000 16x863.2 £3.25

T8 Fluorescent Tubes

BE000376 S858 18 G13 White (3500K) 8000 26x604 £1.99

BE000377 S860 30 G13 White (3500K) 8000 26x908 £1.99

BE000378 S861 36 G13 White (3500K) 8000 26x1213 £1.99

BE000379 S866 58 G13 White (3500K) 8000 26x1518 £2.49

BE000380 S869 70 G13 White (3500K) 8000 26x1829 £3.25

PL-S Tubes

BE000385 S1041 9 G23 C.White (4000K) 10000 31x167 £2.25

BE000386 S1038 11 G23 C.White (4000K) 10000 31x237 £2.25

Energy Saver Linear 24W

BE000387 S4933 24 R7 D.Light (6400K) 10000 118x48x73 £12.25

Energy Saver PAR38 20W

BE000388 S5026 20 ES(E27) White (3500K) 10000 120x138 £12.25

Energy Saver Halogen Linear

BE000389 S5160 120 R7 Clear 2000 9x78 £3.99

BE000390 S5161 160 R7 Clear 2000 9x118 £3.99

BE000391 S5162 230 R7 Clear 2000 9x118 £3.99

BE000392 S5163 400 R7 Clear 2000 9x118 £3.99

SUN TUNNELSLIGHTING


Flat Roof Sun TunnelsIdeal for bringing natural light into areas of the housewhere it is either not possible or not appropriate toinstall a flat roof window.

• Available in 14” diameter flexible tunnel.

• White PVC kerb with polycarbonate cover.

• 1.1 metre length of flexible tunnel.

• 10 year VELUX guarantee.

VELUX SUN TUNNELS

• Available in rigid (10"or 14") or flexible (14") tunnels.

• Exterior flat glass rooflight appearance.

• Clear and clean coating keeps glass cleaner for longer.

• Easy to install with integral flashing.

• 1.85 metre length rigid or 2 metre length flexible tunnel.

• Rigid extensions available for deeper roof structures.

• Double layer acrylic ceiling diffuser.

• Comes with white ceiling ring. Optional additional decorative ceiling rings in different finishes are also available.

• Can be used for night-time lighting with an optional low energy light kit.

• Ventilation outlet to allow connection of an extractor fan and duct (supplied by others) is available for TWR 014 and TWF 014 Sun tunnels.


Natural daylight where you never thought it could reach.Ideal for windowless bathrooms, corridors and cupboards.

Straightforward installationwith integral flashingIntegral flashing makes installation quick andeasy and you can choose flexible or rigidtunnels. Can be installed in slate or tile roofswith pitches of 15˚ to 60˚.

New

Energy


Sun Tunnels

Sun TunnelsPackages include: Rooflight with integral flashing and toughened glazing with clear and clean coating, flexible or rigid tunnel anddouble layer acrylic diffuser with white ceiling ring.

Rigid Sun Tunnels

BB020416 10" diameter rigid tunnel for tiles up to 120mm in profile £240

BB020417 10" diameter rigid tunnel for slate up to 8mm thick £240

BB020418 14" diameter rigid tunnel for tiles up to 120mm in profile £275

BB020419 14" diameter rigid tunnel for slate up to 8mm thick £275

Flexible Sun Tunnels

B4800258 14" diameter flexible tunnel for tiles up to 120mm in profile £210

B4800259 14" diameter flexible tunnel for slate up to 8mm thick £210

Flat Roof Sun Tunnel

BB020415 14" diameter flat roof flexible tunnel with polycarbonate cover £280

Accessories BB020420 600mm rigid extension section for 10" diameter tunnel £45

BB020421 600mm rigid extension section for 14" diameter tunnel £45

BB020422 1,200mm rigid extension section for 14" diameter tunnel £90

BB020423 Low energy light kit for 10" and 14", fits inside tunnel, requires bulb and mains connection £65

� All Sun Tunnels and Accessories have a delivery time of 2 days.

Delivery time is in working days from receipt of orders placed before 4pm.

External frame size (nominal w x h) cm 37 x 37 46 x 46

(60 x 60 for TCF)

14" diameter10" diameter

Tunneldiameter35cm

Tunneldiameter25cm

Flexible Sun TunnelsThe 2m, 355mm diameter flexible tunnel makes installlationaround obstructions in the roof space easier.

Rigid Sun TunnelsThe rigid tunnel features a Micro Silver coating that allowsstrong internal reflection of the daylight.

10" Rigid Sun TunnelsFits between rafters with 400mmcentres.

TWR 010 2010 for tiles up to 120mm in profile.

TLR 010 2010 for slate up to 8mm thick.

14" Rigid Sun TunnelsFits between rafters with 600mmcentres.

TWR 014 2010 for tiles up to120mm in profile.

TLR 014 2010 for slate up to 8mm thick.

14" Flexible Sun TunnelsFits between rafters with 600mmcentres.

TWF 014 2010 for tiles up to120mm in profile.

TLF 014 2010 for slateup to8mm thick.

GET WISEWITH WATERRefreshingly easy-to-use products that save and re-usethis vital commodity

It might be something we all take for granted,

but water is scarcer than you might think,

especially in densely populated urban areas of

the UK. We are all being urged to use it more

wisely, domestically and commercially.

The Government’s water strategy for England,

Future Water, outlines a vision for the average

person to reduce potable water consumption.

Ridgeons products can help you help

your customer achieve this.

The amount of water used in domestic homescan be dramatically reduced without anybodyeven noticing the difference. By installingwater saving taps, showers, low flushing toiletsand baths potable water consumption can bereduced by as much as 25%, thus resulting inlower water bills for the consumer.Rainwater Harvesting & Greywater recycling canreduced potable water consumption further byup to 50%. The collected water can be used toflush toilets, fill the washing machine, waterthe garden or even wash your car.

JARGONBUSTED!Rainwater HarvestingRainwater collected from the roof,

filtered and re-used to replace

potable water, to flush toilets, thus

reducing potable water consumption

and reducing water bills

? !*#

Water


Assessment Criteria

Water Saving Sanitaryware

Rainwater harvesting

Greywater recycling

112-113

114-133

134-141

142-143

Part G April 2010 Buildings Regulations 2000

The facts about our water supplies are actually

pretty shocking. The UK has less available water per

person than most other European countries. London

is drier than Istanbul and the South East of England

has less water available per person than the Sudan

and Syria. This is why the Government has introduced

Part G into the Buildings Regulations, to help,

among other things, minimise the daily amount of

water use of every home in the UK.

Make sure you’re up to speed with

these latest amendments by talking

with a Ridgeons Eco Champion.

Contents

JARGONBUSTED!Grey waterThe water collected from the main

bathroom or en-suite. Bath, Basin,

& Shower waste water only. Cleaned

& filtered and re-used to replace

potable water, to fill the washing

machine, thus reducing potable water

consumption and reducing water bills

? !*#

Greywater recycling

Water saving Sanitaryware

Rainwater harvesting

Water Butt

REDUCE,RE-USE,RECYCLE How reducing water wastecan increase Code creditsfor your project


Wat 1 Indoor water use 5 Yes

Wat 2 External water use 1 No

Water


The Water Efficiency Calculatorfor New DwellingsThis is the Government’s Nationalcalculation method for the assessment ofwater efficiency in new dwellings insupport of Building Regulations Part G2010 and the Code for Sustainablehomes November 2010. The calculatorassesses the contribution that eachinternal water fitting has on whole housewater consumption, measured in litresper person per day based on researchinto typical water use.Due to the impacts of user behaviour itwill not relate directly to the actuallywater use in the home but will provide abenchmark assessment of the typicalconsumption of a specification offittings and their impact on waterefficiency.

Assessment criteria:Water

Water saving sanitaryware, taps, showers and grey andrainwater harvesting systems are something allhomebuilders need to start including in building projectsfrom the beginning. Up to 5 credits are available forperformance that reduces the amount of potable waterused in the home. The minimum mandatory requirementsbegin at level 1 increasing at level 3 and again at level 5.Credits are available for all the indoor potable waterperformance levels required in the Code.

Credits are awarded based on a whole house assessmentof the efficiency of internal water fittings against abenchmark figure and it is measured in litres per person,per day using the Water Efficiency Calculator for NewDwellings. The table below gives details of the requiredperformance level:

Water consumption (litres/person/day) CreditsMandatory

Levels

Criteria

Default Cases None

Part G

1

2

3

4

5

Building Regs

1 & 2

3 & 4

5 & 6

Rainwater recyclingThe rainwater that falls onto a building’sroof is channeled through standardguttering and pipework and rather thangoing into the drain, the water passesthrough a mesh filter to remove leaves ordebris before entering a storage tank.When neededm this water is thenautomatically pumped back into thebuilding and is put to use in non-potableapplications, such as toilet flushing orfilling the washing machine.

Greywater recyclingGreywater gets its name from its cloudyappearance and from its status as beingbetween fresh potable water (known as“white water”) and sewage water (“black water”). Greywater can only becollected from bathroom or en-suites. Thewaste water from baths, showers, handbasins is collected filtered and re-used toflush toilets

Installation type Unit of measure Capacity/flow rate

(1)

The water calculator for new dwellings

4.42

1.46

2.96

Usefactor

(2)

Fixed use(litres/person/day)(3)

Litres/person/day-[(1)x(2)}+(3)(4)

WC (single flush)

WC (dual flush)

Flush volume (litres)

Full flush volume (litres)

Part Flush volume (litres)

Average effective flushingvolume (litres)

Flow rate (litres/minute)

Capacity to overflow (litres)

Bath only

Shower only

Kitchen/utility roomsink taps

Washing machine

Dishwasher

Waste disposal unit

Water softener


Litres/kg dry load

Litres/place setting

Litres/use

Litres/person/day

Taps (excluding kitchen/utility room taps

Bath (where showeralso present)

Shower (where bathalso present)

WCs (multiple fittings)


Capacity to overflow (litres)


4.42

0.50

5.60

4.37

1.58

0.11

2.1

3.6

3.08

1.00

0.44

0.00

0.00

0.00

0.00

0.00

0.00

1.58

0.00

0.00

0.00

0.00

0.00

10.36

0.00

(5) Total calculated use (litres/person/day) - (sum column 4)

<125 l/p/day

<120 l/p/day

<110 l/p/day

<105 l/p/day

<90 l/p/day

<80 l/p/day

INTRO & LOW VOLUME BATHSSANITARYWARE


Bath capacityThe Water Efficiency Calculator requires the input of thecapacity of baths up to the bottom of the bath overflow.Today there are a wide diversity of bath shapes and sizesand it is possible to purchase baths with a capacity aslow as 116 litres (a typical average capacity for baths isaround 190 litres).

To keep water usage low it is recommended that both abath and a shower, or a shower only, are installed in adwelling. If there is only a bath it will be given a veryhigh weighting.

Tap and mixer flow rates All taps and mixers inside the house are measured andthey can account for high water consumption. Whetheryou need to reduce the flow rate on taps or mixers willbe determined by the water pressure in the building.Most mixers and pillar taps can be fitted with waterregulators that either regulate the water into or out ofthe fitting.

WC flush volumeThe calculator takes into account the amount of waterrequired to flush WCs in the house. Modern WCs oftenrequire less water than they used to and by specifying adual flush it is assumed that the small flush will be usedaround twice as much as the large flush – dramaticallyreducing the amount of water consumed.

It is still possible to enjoy a bath without using excessive amounts of water. Water saving baths save water by design: either

the overflow is dropped down to reduce capacity or the shape is altered to reduce the bath’s capacity whilst maintaining

the water depth.

Always ensure the house has a bath and a shower, or a shower only, as the water calculator will calculate a high consumption

figure if there is only a bath in the dwelling.

Water


Sanitaryware

Alto 170 x 70cm bath, 149 litres

Concept water saving bath, 116–149 litres

Water saving bathsThe Concept water saving bath uses a clever design thattakes into account the need for less space at the foot endof the bath whilst bathing. The bath has a capacity of 116litres and accounts for only 12.76 litres of water in thecalculator when there is a shower in the house as well.This compares with an average bath of 190 litres whichwould use 20.9 litres of water.

CODE MODEL MEASUREMENTS VOLUME USAGE PER PERSON USAGE PER PERSON EXC VATH x W x Dmm IN LITRES WITH SHOWER WITH NO SHOWER

Concept Water Saving Bath LH*

K5201747 E736301 500 x 1695 x 695mm 149 16.29 74.50 £314.74

Concept Water Saving Bath RH*

K5201746 E736201 500 x 1695 x 695mm 149 16.39 74.50 £314.74

Alto Water Saving Bath (Two taphole with twin grips)

BK002745 E769001 540 x 1695 x 695mm 149 16.39 74.50 £281.54

Alto CT Water Saving Bath (Two taphole with twin grips)

BK008980 E764201 540 x 1695 x 695mm 140 15.40 70.00 £226.49

Nisa Lowline Steel Bath (2 Taphole and hand grips)

BK002724 S176501 420-445 x 1700 x 700mm 140 15.40 70.00 £559.22

*Concept incorporates the Ideal waste system which allows you to adjust the overflow volume to 116, 130 or 149 litres of water on installation.

IDEAL STANDARD LOW FLUSH WCs

4/2.6 LITRE DUAL FLUSH = 13.54 LITRES PER PERSON PER DAY

CLO

SE C

OU

PLED

WC

SU

ITES

BAC

K T

OW

ALL

WC

s

As in most areas of water consumption it is important to

balance the optimum use of water against the performance of

the product. Some Ideal Standard WCs now flush on as low as

4/2.6 litres of water (dual flush). Although they perform well to

the regulations it wouldn’t be advisable to install these in an

old property where the pipework between the house and the

main sewer may block if low volumes of water are used.

ALTO CLOSE COUPLED WC

CONCEPT BACK TO WALLWC

LOW FLUSH WCsSANITARYWARE


Water usage by WC flushThere is a big difference in water usage in the Calculatorwhen using different WCs:

Cistern capacity

6 litre

6/4 litre Dual Flush

4/2.6 litre Dual Flush

Water usage

26.52 litres

20.60 litres

13.54 litres

CODE DESCRIPTION MODEL EXC VAT

BK003461 Alto Close Coupled Pan, White E754301 £67.66

BK003462 Alto Close Coupled Push Button Cistern, White E754401 £67.66

K5305924 Alto Seat & Cover, White E759001 £28.82

K5309120 Concept Close Coupled Pan, White E787101 £145.61

K5309124 Concept Cube Close Coupled Cistern, White E796901 £116.05

K5309127 Concept Seat & Cover, White E751801 £63.21

K5309120 Concept Close Coupled Pan, White E787101 £145.61

K5309126 Concept Arc Close Coupled Cistern, White E785501 £116.05


K5309122 Studio Close Coupled Pan, White E801501 £145.61

K5309124 Concept Cube Close Coupled Cistern, White E796901 £116.05


K5309122 Studio Close Coupled Pan, White E801501 £145.61

K5309126 Concept Arc Close Coupled Cistern, White E785501 £116.05



BK008035 Concept Back to Wall Pan, White E791601 £224.36

BK002731 Conceala 2 Pneumatic Cistern S365867 £56.67


K5309130 Studio Back to Wall Pan, White E801601 £224.36

BK002731 Conceala 2 Pneumatic Cistern S365867 £56.67


ALTOWALL HUNG WC

CREATE EDGE/SQUAREBACK TO WALL WC

WHITE CLOSE COUPLED WC

WHITEBACK TO WALL WC

Water


Sanitaryware

4.5 LITRE SINGLE FLUSH = 19.89 LITRES PER PERSON PER DAY

Conceala cisterns do not include flush buttons.


K5307854 White Close Coupled Pan, White E000101 £288.99

BK002739 White Close Coupled Push Button Cistern E592401 £213.10

K5307856 White Seat & Cover, White E002101 £108.70

K5308350 Create Close Coupled Pan, White E301201 £212.11

BK002734 Create Edge Close Coupled Push Button Cistern E592801 £182.12

K5308353 Create Edge Seat & Cover, White E303401 £82.86

K5308795 Jasper Morrison Close Coupled Pan, White E622001 £193.07

BK002735 Jasper Morrison Close Coupled Push Button Cistern E592901 £138.26

K5308798 Jasper Morrison Seat and Cover, White E620301 £87.48


BK003461 Alto Close Coupled Pan, White E757301 £67.66

BK002667 Conceala 2 Cistern S427067 £63.25


K5307854 White Close Coupled/Back To Wall, White E000101 £288.99



K5308355 Create Back To Wall Pan, White E301301 £225.39


K5308353 Create Edge/Square Seat & Cover, White E303401 £82.86

K5308800 Jasper Morrison Back To Wall Pan, White E622101 £212.38


K5308798 Jasper Morrison Seat & Cover, White E620301 £64.36


K5305931 Alto Wall Mounted Pan White R341901 £171.73



K5307942 White Wall Mounted Pan, White E000501 £305.71



K5308356 Create Wall Hung Pan, White E301401 £289.18


K5308353 Create Edge/Square Seat & Cover, White E303401 £82.86

K5308801 Jasper Morrison Wall Hung Pan, White E621701 £247.34


K5308798 Jasper Morrison Seat & Cover, White E620301 £64.36

CLO

SE C

OU

PLED

W

C S

UIT

ESBA

CK

TO

WA

LL W

CSU

ITES

WA

LL H

UN

G W

CSU

ITES

IDEAL STANDARD TAPS & MIXERS

It is possible to reduce the flow from taps and mixers to achieve good

performance whilst reducing the total water consumption. Consider having

different flow rates in different rooms of the house. A cloakroom mixer does not

require the same flow rate for simple hand washing as a basin mixer that will be

used to fill a basin.

CERAPLAN SL BASIN MIXER

JASPER MORRISONBASIN MIXER

SILVERBASIN MIXER

CONE BASIN MIXER

ATTITUDE BASIN MIXER

TAPS & MIXERS SANITARYWARE


There are two types of flow regulatorthat can be fitted. Some mixers useoutlet regulators that are screwedonto or fitted into (cache) the outlet;some taps and mixers use inlet flowregulators that arefitted into the baseof the fitting.Regulators areavailable in 5, 4 or 2litres per minute.

FLOW REGULATORS

Inlet flow regulator

Outlet flow regulator

CODE DESCRIPTION MODEL USAGE PER PERSON EXC VATLITRES

BK001238 5 Litres per minute L6982NU 9.48 £2.68BK001239 4 Litres per minute L6936NU 7.90 £2.68BK001240 2 Litres per minute/spray (Cloakroom) E6937NU 4.74 £2.68


BK002879 Attitude Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) A4592AA £114.85K5803024 Cone Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) B5107AA £112.35K5801526 Academy Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) E0106AA £178.94K5803601 Ceraplan SL Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) B7886AA £75.97BK002750 Ceraplan SL Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) B7887AA £71.37K5803930 Ceraplan Disc Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) B8242AA £72.16K5803931 Ceraplan Disc Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) B8243AA £67.81K5803939 Ceraplan Duo Dual Control Basin Mixer (Dual Control, One Taphole, Basin Mixer with Pop-Up Waste) B8247AA £68.37K5803014 Ceramix Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) A5410AA £114.71


K5803730 Active Basin Taps (Standard Pair Basin taps) B8074AA £65.15K5803937 Ceraplan Duo Basin Taps (Standard Pair Basin taps) B8256AA £56.88

Water


Sanitaryware

IDEAL STANDARD BASIN MIXER OUTLET FLOW REGULATOR


BK001242 6 Litres per minute S8011NU 11.06 £2.28BK001243 4 Litres per minute L6935NU 7.90 £1.48

IDEAL STANDARD BASIN MIXER INLET FLOW REGULATOR


BK001241 4 Litres per minute L6939NU 7.90 £2.68


BK002881 Attitude Vessel Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) A4755AA £229.68K5803686 Jasper Morrison Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) E6396AA £127.60K5803688 Jasper Morrison Vessel Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) E6423AA £255.18K5802995 Silver 3 Taphole Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) E0061AA £278.69BK004811 Silver 3 Taphole Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) E0062AA £271.74K5802988 Silver Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) E0067AA £225.62K5802989 Silver Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) E0068AA £218.95K5803432 Silver Vessel Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) E0069AA £265.44K5802986 Silver Dual Control Basin Mixer (Single Lever, One Taphole, Basin Mixer with Pop-Up Waste) E0065AA £222.96K5802987 Silver Dual Control Basin Mixer (Single Lever, One Taphole, Basin Mixer No Waste) E0066AA £218.95

IDEAL STANDARD BASIN MIXER CACHE OUTLET FLOW REGULATOR

KITCHEN MIXERS & SHOWERSSANITARYWARE



BK004797 Ceraprint (Single Lever Sink Mixer with Swivel Spout) B5344AA £109.11BK004798 Ceraprint (Single Lever Sink Mixer with Pull Out Spout) B5347AA £146.95BK004759 Ceravie (Single Lever Sink Mixer with Swivel Spout) A3876AA £167.01BK004760 Ceravie (Single Lever Sink Mixer with Pull Out Spout) A3879AA £211.53


BK001238 5 Litres per minute L6982NU 9.48 £2.68BK001239 4 Litres per minute L6936NU 7.90 £2.68

IDEAL STANDARD SHOWER FLOW OUTLET LIMITERS

An uncontrolled shower can use a considerable amount ofwater under high pressure.

Shower outlet regulators are fitted between the shower valveand the shower hose and head. Regulators are available toachieve a flow rate of 9, 8, 7, 6 or 5 litres per minute.

CODE LITRES PER MIN MODEL USAGE. LITRES PER PERSON USAGE. LITRES PER PERSON EXC VATWITH BATH IN HOME WITH NO BATH IN HOME

BK001233 9 L6749AA 39.33 34.96 £4.38BK001234 8 L6961AA 34.96 44.80 £4.38BK001235 7 L6960AA 30.59 39.20 £4.38BK001236 6 L6959AA 26.22 33.60 £4.38BK001237 5 L6938AA 21.85 28.00 £4.38

IDEAL STANDARD KITCHEN MIXER OUTLET FLOW REGULATOR


BK004781 Alto ecotherm A4740AA £91.17BK004763 Active A4049AA £239.61BK004755 Trevi Link A3543AA £207.33K5803924 Malange A4336AA £272.82

Water


Sanitaryware

IDEAL STANDARD BAR VALVES (0n exposed valves the flow limiter is fitted between the fitting and the hose.)


K5902959 Trevi A3101AA £220.62

EXPOSED THERMOSTATIC CONCENTRIC VALVES

MANUAL VALVES


K5902956 Trevi CTV A3102AA £220.62K5904068 Trevi TT Ascari (Faceplate and Handles) A3971AA £138.35K5904066 Trevi TT Ascari (Valve Body) A3969NU TT £162.37K5904070 Trevi TT Kurve (Faceplate and Handles) A3973AA £138.35K5904066 Trevi TT Kurve (Valve Body) A3969NU TT £162.37K5904069 Trevi TT Rivage (Faceplate and Handles) A3972AA £138.35K5904066 Trevi TT Rivage (Valve Body) A3969NU TT £162.37K5904071 Trevi TT Oposta (Faceplate and Handles) A3974AA £000.00K5904066 Trevi TT Oposta (Valve Body) A3969NU TT £162.37K5904440 Trevi TT Cone (Faceplate and Handles) A4020AA £138.34K5904066 Trevi TT Cone (Valve Body) A3969NU TT £162.37K5904439 Trevi TT Silver (Faceplate and Handles) A3642AA £185.98K5904066 Trevi TT Silver (Valve Body) A3969NU TT £162.37K5904771 Trevi TT Jasper Morrison (Faceplate and Handles) A6410AA £153.12K5904066 Trevi TT Jasper Morrison (Valve Body) A3969NU TT £162.37K5904862 Trevi TT Active (Faceplate and Handles) A4105AA £138.34K5904066 Trevi TT Active (Valve Body) A3969NU TT £162.37BK002885 Attitude (Valve Body) N9788AA £153.11K5803926 Melange (Valve Body) N9788AA £153.12BK003530 Moments (Valve Body) N9788AA £184.03

BUILT-IN THERMOSTATIC SHOWER VALVES(0n built-in valves the flow regulator is fitted between the fitting and the outlet pipe.)


K5903679 Trevi Blend (Exposed) A3086AA £174.43K5900636 Trevi Blend (Built-In) A4000AA £174.43K5803019 Ceramix (Exposed) A5023AA £133.83BK004785 CeramixD (Built-In) A5026AA £115.24BK004795 Ceraplan SL (Exposed) B3699AA £115.26BK003487 Alfiere (Exposed) N9788AA £174.30BK003527 Moments (Built-In) A3912AA £208.56

ALTO ECOTHERM

TREVI CTV EXPOSEDTHERMOSTATIC VALVE

TREVI TT CONE

TREVI TT SILVER

LOW VOLUME BATHS & WCsSANITARYWARE


ROCA LOW VOLUME BATHS

CODE MODEL MEASUREMENTS VOLUME USAGE PER PERSON USAGE PER PERSON EXC VATH x W x Dmm IN LITRES WITH SHOWER WITH NO SHOWER

Carla Eco Steel Bath (2 Tapholes, Anti-Slip Twin Grips)

BK002756 2215L3000 1700 x 700 x 313 130 14.30 65.00 £183.89

Contesa Eco Steel Bath (2 Tapholes)

BK002757 2215K3000 1700 x 700 x 313 130 14.30 65.00 £150.48

Almeria Eco Acrylic Bath (2 Taphole)

BK002755 024732000 1700 x 700 x 345 130 14.30 65.00 £268.06

Almeria Eco Acrylic Bath (2 Taphole with Twin Grips)

BK004653 024733000 1700 x 700 x 345 130 14.30 65.00 £285.55

CARLA ECO CONTESA ECO

ALMERIA ECO

Water


Sanitaryware

4.5/3 LITRE DUAL FLUSH = 15.45 LITRES PER PERSON PER DAY

6/3 LITRE DUAL FLUSH = 17.64 LITRES PER PERSON PER DAY


K5308622 Laura Close Coupled Pan, White 34239S000 £73.25

K5308624 Laura Cistern, White 34139U000 £116.48

K5308882 Laura Toilet Seat & Cover, White 80134U001 £61.77

BK001415 Meridian-N Close Coupled Pan (Open Back), White 342247000 £225.54

BK001416 Meridian-N Close Coupled Push Button Cistern, White 34124C000 £197.67

BK001417 Meridian-N Seat & Cover, White 8012A0004 £72.23

BK009072 Senso Compact ECO Close Coupled Pan, White 34251S00 £190.67

BK009073 Senso Compact ECO Close Coupled Push Button Cistern, White 34151D000 £193.06

K5307971 Senso Seat & Cover, White 801511004 £73.62

BK007403 The Gap Close Coupled Pan, White 342477000 £135.74

BK007404 The Gap Close Coupled Cistern, White 34147C00 £142.30

BK007405 The Gap Luxury Seat & Cover, White 801470004 £61.30


K5308025 Giralda Close Coupled Pan, White 342466000 £154.47

K5308027 Giralda Close Coupled Push Button Cistern, White 341468000 £154.47

K5308029 Giralda Seat & Cover, White 801461004 £62.76

K5308600 Hall Close Coupled Pan (Open Back), White 342627000 £265.86

K5308601 Hall Close Coupled Push Button Cistern, White 34162C000 £229.05

K5308602 Hall Soft Close Seat & Cover, White 801622004 £99.53

K5308622 Laura-N Close Coupled WC Pan, White 342396000 £73.25

K5308624 Laura-N Close Coupled Push Button Cistern, White 34139R000 £116.48

K5308628 Laura-N Toilet Seat & Cover, White 8013U0004 £35.49

K5309161 Nexo Floor Standing Close Coupled Pan, White 342640000 £131.70

K5309162 Nexo Close Coupled Push Button Cistern, White 341643000 £134.04

K5309165 Nexo Luxury Seat & Cover White 801640004 £58.27

K5309071 Senso Close Coupled Pan, White 342514000 £174.13

K5307969 Senso Close Coupled Push Button Cistern, White 341518000 £174.13


K5307991 Senso Compact WC Pan, White 342518000 £190.67

K5307993 Senso Compact Close Coupled Push Button Cistern, White 34151B000 £193.06


MERIDIAN-N

SENSO COMPACT

HALL

NEXO

TOUCH AMURA-N

MOAI LOGICA-N ESMAI

BRASSWARESANITARYWARE



K5803456 Touch Basin Mixer with Pop-Up Waste 5A3047C00 £352.26

K5803895 Thesis Basin Mixer with Pop-Up Waste 5A3050C00 £237.64

K5803054 Amura-N Basin Mixer with Pop-Up Waste 527234670 £232.92

K5803989 Singles-Pro Basin Mixer with Pop-Up Waste 5A3036C00 £244.75

BK008316 M2-N Basin Mixer with Pop-Up Waste 5A3068C00 £191.41

K5803460 Moai Basin Mixer with Pop-Up Waste 5A3046C00 £188.54

BK008324 Logica-N Basin Mixer with Pop-Up Waste 5A3027C00 £161.43

K5803896 Esmai Basin Mixer with Pop-Up Waste 5A3031C00 £144.75

ROCA BASIN MIXERS


BK003448 3.75 Litres per minute 0213FR000 7.51 £3.79

BK003449 5 Litres per minute 0215FR000 9.48 £6.33


ROCA FLOW RESTRICTORS

FLOW RESTRICTORS

Water


Sanitaryware

MONOJET-N TARGA VECTRA

V2 BRAVA-N DANUBE-N


K5803370 Monojet-N Basin Mixer with Pop-Up Waste 5A3039C00 £137.22

K5803623 Targa Basin Mixer with Pop-Up Waste 5A3060C00 £115.39

BK001272 Monodin-N Basin Mixer with Pop-Up Waste 5A3007C00 £110.72

K5803627 Vectra Basin Mixer with Pop-Up Waste 5A3061C00 £87.41

BK001263 V2 Basin Mixer with Pop-Up Waste 5A3025C00 £81.58

K5803953 Brava-N Mono Basin Mixer with Pop-Up Waste Chrome 5A3030C00 £74.26

K5803946 Danube-N Mono Basin with Pop-Up Waste 020241C00 £70.34

K5803960 Danube-N Chrome Plated Heads 020000C00 £14.48

K5803948 Danube-N Chrome Plated Crossheads 020111C00 £18.09

ROCA BASIN MIXERS






FLOW RESTRICTORS

SHOWERSSANITARYWARE



BK003443 Danube-T Shower Mixer with Kit 022TS1C00 £186.98

BK003417 Prada-T Wall-Mounted Thermostatic Bath Shower Mixer 5262473E0 £255.99

BK003418 Prada-T Wall-Mounted Thermostatic Shower Mixer 5262474E0 £221.40

BK003416 Prada-T Built-In Thermostatic Bath Shower Mixer 5262461E0 £306.73

BK006833 Prada-T Built-In Thermostatic Shower Mixer 5262462E0 £238.70

BK003444 Panama-N-T Wall-Mounted Thermostatic Shower Mixer 5A1108C00 £404.10

BK003446 Panama-N-T Wall-Mounted Shower Mixer 5A1308C00 £355.86

BK003445 Panama-N-T Thermostatic Shower Valve 5A2208C00 £465.85

BK006741 Panama-N-T Built-In Thermostatic Bath or Shower Mixer 5A2308C00 £417.41

BK006861 Targa-T Wall-Mounted Bath Shower Mixer with Kit 5A1160C00 £325.69

BK003424 Targa-T Wall-Mounted Shower Mixer with Kit 5A1360C00 £293.12

BK003425 Targa-T Built-In Thermostatic Shower Valve 5A2960C00 £407.92

BK006817 Moai-T Wall-Mounted Thermostatic Bath Shower Mixer 5A1146C00 £345.93

BK003412 Moai-T Wall-Mounted Shower Mixer 5A1346C00 £284.80

BK003413 Moai-T Thermo Built-In Bath Shower Mixer 5A2846C00 £427.21

BK006816 Moai-T Built-In Thermostatic Shower Mixer 5A2946C00 £345.93

ROCA BATH & SHOWER MIXERS

PRADA-T PANAMA-N-T

DANUBE-T TARGA-T MOAI-T

Water


Sanitaryware


BK003440 Loft-T Wall-Mounted Bath Shower Mixer 5A1143C00 £416.17

BK003437 Loft-T Thermostatic Wall Mounted Shower Mixer 5A1343C00 £330.55

BK003438 Loft-T Built-In Bath Shower Mixer 5A0643C00 £506.60

K5804012 Loft-T Built-In Shower Mixer 5A0743C00 £493.42

BK003435 Amura-N-T Wall Mounted Bath Shower Mixer 526244880 £423.18

BK006748 Amura-N-T Wall Mounted Shower Mixer 526244980 £386.29

BK003434 Amura-N-T Built-In Bath Shower Mixer Valve 526245780 £518.89

BK003433 Amura-N-T Built-In Shower Mixer Valve 526245880 £423.18

K5803992 Thesis-T Wall Mounted Bath Shower Mixer 5A1150C00 £393.93

BK003427 Thesis-T Wall-Mounted Shower Mixer 5A1350C00 £333.32

BK003428 Thesis-T Built-In Bath Shower Mixer 5A2850C00 £501.16

K5803977 Thesis-T Thermostatic Bath Shower Mixer 5A2950C00 £396.26

ROCA BATH & SHOWER MIXERS






FLOW RESTRICTORS

AMURA-N-T LOFT-T THESIS-T

For more information visit www.uk.roca.com and downloador request a copy of the Saving Water with Roca brochure.

LECICO WATERSAVE OPTIONS WITH LECICO WATER SAVING FLUSH SYSTEMS (4 AND 2.6 LITRE) YOU CAN SAVE WATER (UP TO 35%)AND MONEY WHILE PROTECTING THE ENVIRONMENT

LOW FLUSH WCsSANITARYWARE


RIVIERA WATERSAVE WC


Riviera Watersave WC

K5308261 Riviera Close Coupled Pan RVWHPA £115.38

K5308488 Riviera Water Saving Cistern (Cistern including pre-installed cistern fittings) RVWHPCI £103.13

K5308266 Riviera Seat & Cover, White STWHRV £42.10


Atlas Watersave Combination Pack

K5309300 Riviera pan, pre-installed Atlas tank and seat in one box WSPCOMB £199.95

Atlas Watersave Bath Pack

K5309301 Watersave close coupled bath pack with 1700cm (130 litres) steel bath. BPWS17C/C50 £518.70Flow restrictors are supplied with the brassware.

Atlas Watersave Bath Pack

K5309302 Watersave close coupled bath pack with 1700cm (150 litres) acrylic bath. BPACWS17C/C50 £518.70Flow restrictors are supplied with the brassware.

ATLAS WATERSAVE BATH PACK

Water


Sanitaryware

6/4 LITRE DUAL FLUSH = 20.60 LITRES PER PERSON PER DAY


K5308921 Madison Close Coupled Pan, White MDWHPA £135.28

K5308922 Madison Cistern c/w Fittings, White MDWHPCI £73.45

K5308936 Madison Seat & Cover, White STWHSMD £33.85

BK001244 Lecico Steps Close Coupled Pan, White STPWHPAN £137.90

BK001245 Lecico Steps Close Coupled Push Button Cistern STPWHPCI £83.18

K5308936 Lecico Steps Seat & Cover, White STWHSMD £33.85

K5308422 Olympiad Close Coupled Pan, White MMWHPA £96.28

K5308423 Olympiad Cistern c/w Fittings, White MMWHCI £89.20

K5308428 Olympiad Seat & Cover, White STWHMM £35.38

K5305723 Atlas Close Coupled Pan, White ASWHPA £51.69

K5308763 Atlas Close Coupled Push Button Cistern ASWHPPBCI £57.42

K5308548 Universal Seat and Cover, White STWHASLUX £29.86

K5308192 Marbella Close Coupled Pan, White MBWHPA £123.98

K5308802 Marbella Close Coupled Cistern, White MBWHPCI £106.20

K5306136 Marbella Seat & Cover, White STWHAG £37.38

K5308547 Malaga Short Projection Pan, White MGWHSPA £104.22

K5308764 Malaga Close Coupled Cistern, White MGWHPCI £104.22

K5308578 Malaga Short Projection Seat & Cover, White STWHSMG £44.88

K5308682 Rimini Close Coupled Pan, White RMWHPA £102.45

K5308683 Rimini Cistern c/w Fittings Pack, White RMWHCI £92.15

K5306136 Rimini Seat & Cover, White STWHAG £37.38

K5307110 Laguna Close Coupled Pan, White LGWHPA £120.08

K5308943 Laguna Close Coupled Cistern, White LGWHPCI £114.53

K5307116 Laguna Seat and Cover, White STWHLG £38.75


K5306118 Atlas Back To Wall Pan, White ASWHBWPA £81.46

Conceala 2 Cistern BTWCOMPACT £63.25

K5307628 Universal Seat & Cover, White STWHSSUNP £18.18

K5308883 Marbella Back To Wall, White MBWHBWPA £123.98

BK002667 Conceala 2 Cistern BTWCOMPACT £63.25

K5306136 Marbella Seat & Cover, White STWHAG £37.38

K5308918 Malaga Back To Wall Pan ,White MBWHBWPA £136.90


K5308578 Malaga Seat & Cover, White STWHSMG £37.40

K5308298 Laguna Back To Wall Pan, White LGWHBWPA £141.50


K5307116 Laguna Seat & Cover, White STWHLG £38.75

K5308932 Madison Back To Wall Pan, White MDWHBWPA £147.05




K5307882 Atlas Wall Hung Pan White ASWHWHP £137.45


K5307628 Universal Seat & Cover, White STWHSSUNP £18.18

K5308933 Madison Wall Mounted Pan, White MDWHWHP £147.05



CLO

SE C

OU

PLED

WC

SU

ITES

BAC

K T

O W

ALL

WC

SU

ITES

WA

LL H

UN

GW

C S

UIT

ESLECICO STEPS CLOSE

COUPLED WC

MALAGA CLOSE COUPLED WC

MALAGA BACK TO WALL WC

MADISON WALL HUNG WC

SHOWERSSANITARYWARE


VSDCA01G / VSDCA01HC

AQUALISA VISAGE DIGITAL SHOWER

CODE MODEL/ LPM USAGE, LITRES USAGE, LITRES EXC VATDESCRIPTION PER MINUTE WITH PER MINUTE WITH

BATH IN HOME NO BATH HOME

VSDEA01HCK5904905 VISAGE DIGITAL EXPOSED – HP/COMBI £369.17

NORMAL MODE FLOW RATE 12LPM 52.44 67.2

ECO MODE* 8LPM 34.96 44.8

VSDEA01GK5904903 VISAGE DIGITAL EXPOSED – GRAVITY £431.67


ECO MODE 10LPM 43.70 56

VSDCA01HCK5904906 VISAGE DIGITAL CONCEALED – HP/COMBI £349.17


ECO MODE* 8LPM 34.96 44.8

VSDCA01GK5904904 VISAGE DIGITAL CONCEALED – GRAVITY £411.67


ECO MODE 10LPM 34.70 56

* ECO MODE NOT SUITABLE FOR USE WITH COMBI BOILER WATER SYSTEMS

In addition to delivering a great, digital showeringperformance with spot-on temperatures and perfectpressure, Aqualisa’s Visage Digital also features a clevereco setting. Activated by a twist of the installer’sscrewdriver during fitting, Visage Digital’s eco setting iscapable of reducing water flow down to around 8 litresper minute. That’s up to 10 litres less than an averageshower might use and a big advantage for anyonelooking for a greener showering solution.

The shower is powered byAqualisa’s clever, system specificdigital processor, delivering agreat shower, no matter the typeof plumbing system. That means,regardless of gravity fed, combior mains, hot and cold watersupplies will be thermostaticallyblended, every single time.

VISAGE DIGITALCONCEALEDVISAGE DIGITAL CONTROL

Water


Sanitaryware

MD100BAR MD200BAR MD300BAR

CODE MODEL/DESCRIPTION LPM USAGE, LITRES USAGE, LITRES EX VATPER MINUTE WITH PER MINUTE WITHBATH IN HOME NO BATH HOME

K5905083 MD100BAR MIDAS 100 SHOWER – HP/COMBI £130.00K5905084 MD100EBAR MIDAS 100 SHOWER WITH EASY FIT FIXING BRACKET – HP/COMBI £148.34K5905085 MD100BSM MIDAS 100 BATH/SHOWER MIXER – HP/COMBI £195.00

UNRESTRICTED (TYPICAL FLOWRATE VIA 3 BAR UNVENTED SYSTEM) 15LPM 65.55 84

WITH 12LPM SHOWER OUTLET FLOW REG FITTED 12LPM 52.44 67.2


WITH 6LPM** SHOWER OUTLET FLOW REG FITTED 6LPM 26.22 33.6

**6LPM FLOW REG NOT SUITABLE FOR USE WITH

COMBI BOILER WATER SYSTEMS

K5905086 MD200BAR MIDAS 200 SHOWER – HP/COMBI £208.33K5905088 MD200BSM MIDAS 200 – BATH/SHOWER MIXER – HP/COMBI £284.17

UNRESTRICTED (TYPICAL FLOWRATE VIA 3 BAR UNVENTED SYSTEM) 18LPM 78.66 100.80






BK006881 MD300BAR MIDAS 300 SHOWER – HP/COMBI £270.83BK006883 MD300BSM MIDAS 300 – BATH/SHOWER MIXER – HP/COMBI £343.33

UNRESTRICTED (TYPICAL FLOWRATE VIA 3 BAR UNVENTED SYSTEM) 18LPM 78.66 100.80






AQUALISA MIDAS BATH SHOWER MIXERS

MIDAS 300 BATH SHOWER MIXER– DECK MOUNTED

SHOWERS & TAPSSANITARYWARE

Trade Prices. All offers are nett and exclude VAT. All prices correct

INTA – THE DELUGE BATH AND SHOWER ROOM RANGE

The water efficient deluge range from inta offers thermostatic

protection and comfort for every bathroom and shower room in

the house. Beautifully designed to give an invigorting shower.

Exposed and concealed showers provide a safe solution for you

and your family. Featuring TMV2 and WRAS approval the

performanceof the deluge range is assured.

The products are suitable for all types of plumbng systems

including gravity supplied, fully pumped, modulating

combination boiler, unvented water heater and unbalanced

supplies.

Water efficient options available, delivering no more than 8 ltr

per min without sacrifi cing the deluge showering experience.

TECH NO LO GY BUI LT IN





delugethermostatic barshower with fixed riser,overhead soaker andsliding handsetK5904867 £310.288 litre per min optionBK010262 £316.04

delugethermostatic barshower with telescopicriser, overhead soakerand sliding handsetBK004655 £326.088 litre per min optionBK010263 £331.84

delugethermostatic barshower fl exible sliderail kitK5905192 £161.638 litre per min optionBK010264 £168.93

delugethermostatic bathshower mixerwith fl exible sliderail kit and deckmounting legsK5905194 £344.24

Water


Sanitaryware


delugebasin mixer tap with eco clickcartridge and click clack wasteBK010265 £102.47

infraredcontemporary basin mounted tap.limited to 6 ltr/minBK010268 battery £266.18BK010269 mains £267.92

perfect timeelectronic tap (battery operated).limited to 5 ltr/minBK010266 £174.16

telothermostatic bar showerwith flexible slide rail kitand fast fix bracketsBK010267 £141.63

non concussivebasin mounted contemporary tapflow time 15 seconds at 1 bar pressureBK010273 (pairs) £58.41

shower flow regulators6 litre regulator for showers (brass/cp)BK010270 £4.018 litre regulator for showers (brass/cp)BK010271 £4.0110 litre regulator for showers (brass/cp)BK010272 £4.25

Envireau GravitySystem

1 Water main2 Storage tank3 Envireau control panel4 Level display unit5 In-line filter 120 microns6 Internal rainwater filter7 Submersible pump8 Header tank9 Adjustable tank neck10 External tap11 Roof rainwater feed12 Filtered rainwater feed

• WC and urinal flushing• Irrigation and landscape watering• Garden watering• Vehicle washing• Domestic laundry

Uses

1

2

3 4

5

8

10

9

11

12

6

7

A

B

C

D

E

Packaged Components

KINGSPANWATER ENVIREAU GRAVITY SYSTEM

The Gravity System is ideal for domestic applications. It has a

major advantage in that in the event of a power failure on site

(or the rain stocks running dry) the system will automatically

switch to mains water supply to ensure a continuity of service.

The gravity system requires a header tank to complete the

package. Kingspanwater supply a header tank as an optional

extra which contains two independent valves operating both

the mains and rainwater supply (we recommend a

Kingspanwater header tank is used). The water from the

header tank will flow by gravity to the serviced appliances.

The system will always draw from the rainwater supply first.

BELOW GROUNDRAINWATER HARVESTING


G

2 3 4 5

41

1 2

The Envireau can be configured as adirect or gravity system from the box

Key 2 in main images Key 6 in main images Key 7 in main images Key 3 & 4 in main images

1 KingspanWater polythene Underground Storage Tanksuitable for the 60m2 to 200m2 roof areas. Suitable forpea shingle back fill in dry site conditions. (Note: for larger roof area suitable tanks available)

2 Internal Self Cleaning Rainwater Filter3 Stainless Steel Multi-stage Submersible Pump with

Floating Filter4 Envireau Control and Display Panel

(controls the stopping and starting of the pumps)5 50m Cable Length are fixed on all units

OTHER FIXTURE & FITTINGS- Depth Sensor lies on the bottom of the tank. It measures

depth of the water above it and will relay the informationback to the main control panel. This activates the mainswater supply when required and disables the pump whenwater levels in the tank are running low.

- Solenoid Valve (regulates the supply of mains water in thedirect system).

- Tundish (provides the mandatory air gap in the direct system

Underground Storage TankThe Kingspanwater polyethyleneunderground rainwater storage tank hasbeen designed with superior quality toensure strength and durability.

A Adjustable Tank Neck B System Ventilation

C Integral Leaf Filter D Calmed Inlet

E Pump

Envireau Direct

System

• WC and urinal flushing• Irrigation and landscape watering• Garden watering• Vehicle washing• Domestic laundry

Uses

26

7

9

1

34

58

10

11

1 Water main2 Storage tank3 Envireau control panel4 Level display unit5 In-line filter 120 microns6 Internal rainwater filter7 Submersible pump8 External tap9 Adjustable tank neck10 Roof rainwater feed11 Filtered rainwater feed

Water


Rainwater Harvesting

KINGSPANWATER ENVIREAU DIRECT SYSTEM

The Direct System is also suitable for domestic applications.

This system is used where it is impractical to have a header

tank for example in homes that have converted attic spaces

and no room for a header tank. Therefore filtered rainwater is

pumped direct from the holding tank to the various

appliances.

When the holding tank is running dry there is a small

automatic charge of mains water into the storage tank to

ensure the system never runs dry. The main advantage of this

system is that rainwater is delivered to the appliances at mains

pressure or higher.

KINGSPANWATER ENVIREAU SYSTEM

CODE MODEL RECOMMENDED TANK DIMENSIONS EXC VATROOF SIZE DIAMETER HEIGHT* LENGTH INLET & OUTLET INNVERT

BH004878 ENVD060KSW 60m2 1350mm 2220mm 1700mm 500 - 800mm £3,405.60




* Includes tank neck - adjustable to suit required invert

WPL ENVIRONMENTAL WASTEWATER SOLUTIONS

RainRetain Premium Domestic Rainwater HarvestingThe RainRetain Premium domestic systems are designed to the highest possible

standards and use high quality tanks, pumps and filters. There are two complete

systems available in this range, the Home system and the Garden system with a

variety of tank sizes.

BELOW GROUNDRAINWATER HARVESTING


RainRetain PREMIUM DOMESTIC RAINWATER HARVESTING


BB021059 WPL 2700L RainRetain Premium Garden System £1,450.00







BB021066 WPL 2700L RainRetain Premium Home System £1,999.00







RainRetain High Water Table Domestic Rainwater HarvestingUsing the same technology as the Premium system, but with a donut shaped tank

which is stable enough to be completely installed in groundwater or cohesive soil

(e.g. loam) if required. Available in 2 sizes, for the Home or Garden.

RainRetain HIGH WATER TABLE DOMESTIC RAINWATER HARVESTING


BB021073 WPL 2000L RainRetain High Water Table Garden System £1,775.00

BB021074 WPL 3000L RainRetain High Water Table Garden System £1,925.00

BB021075 WPL 2000L RainRetain High Water Table Home System £2,350.00

BB021076 WPL 3000L RainRetain High Water Table Home System £2,450.00

Water



RainRetain Developer’s Domestic Rainwater HarvestingThe developer’s system has been specifically designed with developers, housing

associations and large scale housebuilders in mind. Available as directed feed or

gravity feed, these systems provide a cost effective means of incorporating

stainable products into developments.

RainRetain DEVELOPER’S DOMESTIC RAINWATER HARVESTING


POA WPL 1600L RainRetain Developers Home System POA

POA WPL 3200L RainRetain Developers Home System POA

Multi-purpose Percolation TunnelsDesigned to work in conjunction with RainRetain domestic rainwater harvesting

range, these multi-purpose percolation tunnels act as a soakaway or surface water

run-off, to replace convential drainage system. The unique design offers 300 litres of

storage per unit whilst giving 3 dimensional pecolation and can be made up of one

or several modules, allows the system to be sized exactly to the volume required.

MULTI-PURPOSE PERCOLATION TUNNELS

RainSustain for Commercial buildings and RainBrain for schoolsProjects involving commercial premises also benefit from rainwater harvesting

systems. Savings can be made on mains water consumption uses such as toilet

flushing and commercial laundry. As well as saving costs, WPL RainSustain systems

can help improve the impact on the environment of an organisation’s or school’s day

to day activities, and reduce its carbon footprint. Systems are bespoke and priced for

each project and can include a dynamic display panel showing levels and useage.

RainSustain FOR COMMERCIAL BUILDINGS AND RainBrain FOR SCHOOLS


BB021081 WPL Percolation Infiltration Tunnel 1160 x 800 x 510mm Black £48.40

BB021082 WPL Percolation Infiltration Tunnel End Plates (2 pack) £30.95

HALSTED RAIN RAINWATER HARVESTING

Water is a precious and scarce natural resource and Government policy and building regulation is increasingly focused on

encouraging greater water conservation. Today, planning consent and the award of Government funded building contracts is

often conditional on being able to meet new water conservation standards.

In the UK a typical family uses 70,000 litres of mains water each year for toilet flushing, laundry and garden irrigation and much

of this could be replaced with rainwater. Actual savings depend on local rainfall patterns, the size of the roof catchment and the

space available for water storage. The potential mains water savings in a light commercial building can be up to 80% of

consumption.

At Halsted Rain we understand that installing a rainwater harvesting system is often a compromise between available space, the

utility required and budget. That is why we have designed a state-of-the-art above ground rainwater utilisation system for toilet

flushing and irrigation that is visually discreet, easy to install and above all reliable. It is ideal for new build and retrofit projects

alike. The system is modular and easy to configure to a range of layouts that make best use of the available space. Multiple

tanks can be joined together using the coupling provided to achieve the desired rainwater storage capacity.

ABOVE GROUNDRAINWATER HARVESTING


Benefits of Halstead Rain Urban Rainwater Harvesting

Affordable• Low capital cost• Easy to install• Low maintenance

Ultra Slim Profile

• Narrow tank minimies any obstruction• Integrates into existing rainwater systems• Visually discreet

Proven Performance

• Made from durable high density UV protected plastics• Incorporates a quality pump and mains water top up valve• Complies woth UK regulations

Easy To Install

• Modular design• Permanent installation using steel support frame and simple fixings• ‘Plug & Play’ pump and control options

The Halsted Rain Slim-line range of integrated rainwater harvesting systems each comprises a filter, modular storage tank, pump

and mains top up valve. Rain falling on a roof is channelled via the existing gutters and down pipe to a filter which removes leaf

litter and other debris before diverting the water into a storage tank. The filter is mostly self cleaning and the tank is purpose

designed to protect the quality of water during storage.

When a utility demands rainwater a pump is automatically activated by a pressure switch to draw water from the tank. The

Company’s entry level compact low energy pump delivers a flow rate that is sufficient to refill a modern toilet cistern in less than

a minute and other pump models are available for larger capacity systems and heavier duty requirements. In the event that

demand exceeds the availability of rainwater, a mains water valve is automatically opened to partly refill the tank. The mains

valve comprises a float switch activated valve and tundish to comply with water regulations. Utilities can be fed directly as

depicted in the schematic below or indirectly by gravity via a header tank.

The Super Slim Wall Tank is easy to mount on a building or integrate into a boundary fence using the steel support frame

provided. The filter is installed in the existing down pipe and the pump and controls either inside the property or outside in a

protective enclosure. Larger capacity tanks are free standing and the pump package is installed in the tank. Additional tanks can

be coupled to the base unit to provide the capacity required.

The layout for a Super Slim Wall Tank System is depicted below. A three tank system can typically save 20% of the mains water

used in an average household. This equates to a potential saving of more than 30,000 litres or £66 per year in metered water

charges and assumes a 3 person household with an average water bill of £342 using 153 litres per person a day. A larger Slim-

line Tower Tank system offers more than double these savings up to 50% of mains water used depending upon the size of the

roof catchment and water usage.

Water



HALSTED RAIN RAINWATER HARVESTING


BB018083 Super Slim Rainwater Tank TS022F01 £247.26

(Wall mounted 220 litre tank 180 x 80 x 19cm including steel support frame, fixings, outlet fitting and tank connection hose)

BB018084 Frogmouth Rainwater Filter FF900S01 £84.78

(900 micron stainless steel rainwater filter and diverter incorporating tank overflowand drain backflow prevention feature)

BB018085 Electronic Internal Pump PU005B01 £185.12

(Pump with 5 litre flow rate, pressure switch and connection kit)

BB018086 Mains Top Valve Kit VK230H01 £136.09

(230v solenoid valve, tundish and float switch)

HALSTED RAIN PRODUCTS

1. Rainwater filter, diverter, tank overflow & back

flow prevention

2. Rainwater tanks with steel tubular support frame

3. Insulated tank outlet & cable to float switch

4. On demand wall mounted pump package

5. Rainwater main to utilities

6. Garden watering via rose gun

7. Mains top up via solenoid valve connected to

float switch and tundish

HARCOSTAR WATER BUTTS


I6903915 2530261 Water Butt With Child Safety Lid 114 Litre 20 x 26 Inch Dark Green £29.99




I6907241 2530151 Slimline Starcan Watering Can 10 Litre Dark Green £9.49

I6907759 2530167 Space Saver Water Butt With Lid 100 Litre Dark Green £29.99

I6910759 2530240 Space Saver Water Butt Stand Dark Green £11.99

WATER BUTT WITH CHILD SAFETY LID

SPACE SAVER WATER BUTT

SPACE SAVER WATER BUTT STAND

WATER BUTTSRAINWATER HARVESTING



H1603927 Rainstore Waterbutt C/W Lid & Tap 200Ltr Green £26.99

H1603842 Rainstore Waterbutt C/W Lid & Tap 280Ltr Green £103.95

H1603928 Rainstore Waterbutt Stand For 200Ltr Model Black £13.66

H1603850 Rainstore Watering Can 10Ltr Green £6.65

H1603857 RS333CR Rainstore Decorative Column Tank 333Ltr Cream £189.75

H1603856 RS333GR Rainstore Decorative Column Tank 333Ltr Green £189.75

H1603859 RS555CR Rainstore Decorative Column Tank 555Ltr Cream £267.30

H1603858 RS555GR Rainstore Decorative Column Tank 555Ltr Green £267.30

H1603865 V1300W General Water Tank Non Potable 1300Ltr Blue £458.70

H1603870 V1300WP General Water Tank Potable 1300Ltr Green £513.15


H1603871 V2500WP General Water Tank Potable 2500Ltr Green £732.60


H1603872 V3600WP General Water Tank Potable 3600Ltr Green £1,029.60

H1603868 V5000W General Water Tank Non Potable 5000Ltr Blue £1,050.70


H1603869 V10000W General Water Tank Non Potable 10000Ltr Blue £2,570.70


Water



TITAN AQUA WATER BUTTS

RAINSTORE WATERBUTT RAINSTORE DECORATIVE COLUMN TANK

CME ECOPLAY SYSTEM

Ecoplay is a clever, low maintenance greywater solution,

capable of radically reducing household water

consumption.

The concept behind Ecoplay is a simple one; instead of

allowing all the water from the bath or shower to drain

away, why not re-use it to flush the toilet?

By diverting bathing or showering water to the Ecoplay

system where it is treated and stored, Ecoplay can

reduce water consumption and drainage loads in the

average home by as much as 30%.

Better still, it can offer a simple way of

achieving a Code level 3 and 4 pass

without any other modifications to existing

supply systems or appliances - even with

today’s trend for high flow devices like

power showers.

GREYWATERRECYCLING SYSTEM


Fail to reachlevel 1

125 l/p/d

Passlevel 3 & 4105 l/p/d

with

the same home can achieve

Recognition for Ecoplay

Since its launch, Ecoplay has won several major awards for design and

its contribution to the environment. It has also has received extensive

coverage in the press:

The Ecoplay System can be used with a range of complementaryproducts available from CME Sanitary Systems such as flushing push plates, as well as the Celmac toilet seat range. To view the fullrange of additional products visit www.cmesansys.com

Water


Greywater

Greywater supply withintegral greywater sensor

Wholesome water supplywith Type AB air gap

Cleaning Tank with connectionto WC cistern (and pump whenspecified)

Storage Tank

Overflow (connected to Waste Pipe) with integralgreywater sensor

Ecoplay Control Unit or ECU

Flushplate

WC Cistern

Ecoplay accommodates BritishStandard Back-to-Wall andWall Hung WC’s

Mains voltage pump when specified for second toilet

Waste Pipe (connects to soil vent pipe)

Safe Tube when specified for secondtoilet (max length 7.5 metres)

Dosing unit

How does the Ecoplay System work?

For the user, the Ecoplay System

works in exactly the same way as

a standard toilet.

Bath and or shower water collects

in the cleaning tank. A skimmer

removes light surface debris such

as foam, hairs and soap, while

heavier waste particles sink and

are flushed away to waste. Clean

water from the middle of the tank

is the transferred to the storage

tank. Combined storage capacity

is 100 litres which provides

approximately 15 flushes.

CME ECOPLAY SYSTEM

DESCRIPTION EXC VAT

CME Ecoplay System £POA

Note: Pan not included.Actual pushplate suppliedwith system is Ambia chrome


When building from the ground up

you’re presented with a vast number of

choices on the materials you use. It’s the

choices you make right at the beginning of

the build that can make a massive

difference to the sustainability of the

project and the level you can achieve in

compliance with the Code. It’s not just

the practical benefits certain materials give

you but the way they are sourced and how

they arrive at your site that can have an

impact on your rating. This is where

Ridgeons can help.

We can supply a whole range of basic and

finishing elements that are responsibly

sourced and environmentally efficient.

The earlier you get us involved in your

project, the more advice we can give you.

You might be thinking of using timber, for

example, which is an excellent way to boost

environmental credentials, so long as it is

sustainably sourced and certified. We can

help you find just what you need.

Many of our products are star rated

under the BRE Green Guide,

considered by many as the ‘Bible’ for

modern building methods. For more

information on this and other products that

could improve the Code level of your

project, just ask a member of our team.

BUILD TO LASTConstructive advice on sustainable building materials

Building materials


Building materials

Assessment Criteria

Timber

Blocks

Insulation

Windows

Paint

Rotary Clothes Dryers

146-147

148-151

152-155

156-161

162-167

168-173

174-175

The Builder’s Bible

The Green Guide is part of BRE (Buildings Research

Establishment) and it is an accredited environmental

rating scheme for all types of buildings, including

domestic. It gives you a star rating on a whole range

of sustainable products available and it evaluates the

performance of materials and building systems

against specific environmental impacts.

Helping you make an informed choice

when choosing building materials.

If you’d like any further help, just ask

a member of the Ridgeons team.

Contents

High performance windows Floor insulation

Roof insulation

Thermalite blocks

Timber - FSC & PEFC

JARGONBUSTED!Responsible sourcingThis simply means buying materials

that have sustainable qualities and that

haven’t harmed the environment when

being produced, like certified timber

from sustainable forests. Also, using a

local builders merchant, like Ridgeons,

also means the products won’t have to

travel far, cutting down on C02 from

transportation methods.

? !*#

Wall insulation

I Joists


Mat 1 Environmental impact of materials 15 Yes

BUILDINGPRODUCTS THAT

DON’T COSTTHE EARTH

The environmental impact ofthe materials you build with

Building materials are coming under

closer scrutiny in the push to lower their

environmental impact. Understanding

just what this means can be confusing

because of the sheer amount of

products used in construction. To help,

we’ve broken down the categories and

given you as much information as

possible to make this process easier.

Mat 2Responsible Sourcing of Materials

– Basic Building Elements 6 No

Mat 3Responsible Sourcing of Materials

– Finishing Elements 3 No


Building materials

There is a mandatory requirement with no availablecredits to achieve a Green Guide rating of betweenA+ and D for at least three of the following fiveelements of the building envelope:

• Roof

• External Walls

• Internal Walls (including separating walls)

• Upper and Ground Floors (including separating floors)

• Windows

Between 1 and 15 credits are available depending on theGreen Guide ratings and relative distributions of differentmaterials across the five main elements of the buildingenvelope. The method for determining the credits toaward for any given situation is described in thecalculation procedure opposite:

MandatoryLevels

Criteria

1-15

All Levels

Where the Code Mat 1 Calculator tool is

used to assess the number of credits awarded

for the five key elements described above.

A+ Rating

Credits

3

Green Guide Rating

2

1

0.5

0.25

0

A Rating

B Rating

C Rating

D Rating

E Rating

Credits

Criteria

1-6

Additionally, 100% of any timber in these elements must belegally sourced.

Where 80% of the assessed materials in thefollowing Building Elements are responsibly sourced:

a) Frame

b) Ground Floor

c) Upper Floors (including separating floors)

d) Roof

e) External Walls

f) Internal Walls (including separating walls)

g) Foundation/substructure (excluding sub-base materials)

h) Staircase

Mat 2 - Responsible Sourcing of Materials Building Elements

To recognise and encourage the specification of responsiblysourced materials for the basic building elements. Points areawarded where materials used in key building elements areresponsibly sourced according to the following criteria:

Calculation Procedure: Design stageCredits are awarded on the basis of rating in the Green Guide as follows:

Where there is more than one specification for an element (eg more than one type ofexternal wall), the credits are awarded for that element, depending on the area weightedGreen Guide rating of each specification. For the purpose of this issue any doors with a largeexpanse of glazing, such as patio doors, should be assessed as windows. Similarly glazed areasof conservatories and rooflights should be assessed as windows.

Assessment criteria:Building materials

Credits

Where at least three of the following fivekey elements achieve a relevant GreenGuide rating from the 2008 version of theGreen Guide of A+ to D:

• Roof

• External Walls

• Internal Walls(including separating walls)

• Upper and Ground Floors (including separating floors)

• Windows

Note: These criteria are assessed at the building envelope level

Credits

Criteria

1-3

Additionally, 100% of any timber in these elements must belegally sourced.

Where 80% of the assessed materials in thefollowing Finishing Elements are responsibly sourced:

a) Stair

b) Window

c) External & internal door

d) Skirting

e) Panelling

f) Furniture

g) Fascias

h) Any other significant use

Mat 3 - Responsible Sourcing of Materials Finishing Elements

To recognise and encourage the specification of responsibly sourcedmaterials for the finishing elements. Credits are awarded on the basis of therequirements in the table below:

TIMBER


RIDGEONS FOREST PRODUCTS

RIDGEONS Forest Products is a timber and panel products specialist.

Our dedicated team has unrivalled expertise covering all aspects of the timber and panel products supply business.

Working in partnership with carefully selected suppliers, enables RIDGEONS Forest Products to consistently deliverthe extremely high quality of product and service that our customers have come to expect.

These standards are maintained through meticulous management of the end to end process, from importation andstockholding to in house timber processing and distribution.

Our operations are based on an impressive 12 acre site at Herringswell in Suffolk that houses one of the mostmodern milling facilities in the UK, together with extensive undercover storage facilities. We also have our own 6acre terminal facility at Ipswich docks.


Building materialsTimber

ENVIRONMENTALLY SOUND

At RIDGEONS Forest Products we take our environmental responsibitlites extremely seriousl and sustainability is atthe heart of our philosophy and everything we do.

We continually strive to minimise our impact on the environment and we’re fully committed to the ResponsiblePurchasing Policy. RIDGEONS Forest Products has held full Chain of Custody certification since 2004 which enablesus to offer full FSC (Forest Stewardship Council) and PEFC (Programme for the Endorsement of Forest Certification)certified products across our entire range, including softwoods, hardwoods, sheet materials and engineering woodproducts.

Our strict environmental policies mean that we only work with suppliers who share our standards and maintaintheir own environmentally sound practices, thereby ensuring that when you purchase Chain of Custody certifiedproduct from us you can rest assured that it is legally sourced from well-managed sustainable forests, ensuring thatresources continue to be available for generations to come.

OUR PRODUCTS

• Over 200 planed and moulded sections including

skirtings, architraves, matchings and floorings

precision machined in our sawnmills

• Sawn Joinery

• Garden landscaping, decking and fencing timbers

• Carcassing to specifications

• Preservative treatment

• Special machining

• Special bespoke machining including small runs

• Timber Claddings

TIMBER FRAME & I-JOISTSTIMBER


With the expansion of Ridgeons Timber Engineering Division and relocation into a purpose built manufacturing and office facility atSudbury, we are happy to announce that we can now provide an even more comprehensive service to the building trade than everbefore, providing the ultimate service for all your Timber Engineering needs.

Pressures on the developer/builder to adopt environmentally friendly measures are becoming more apparent, with the governmentdemanding all partners in the industry to contribute in reducing the impact of CO2 emissions. Planning and fiscal policy will favour“green” development; the thermal insulation standards of the Building Regulations will become even more demanding. TimberFrame’s environmental credentials and fast track production techniques can contribute towards achieving a sustainable community.

Our experience covers a wide range of projects from single to multi-storey buildings. Our early involvement at design stage isessential to ensure a successful delivery of the building. Working closely with your design teams, we can address issues such as:CDM and Health & Safety along with the integration of mechanical and electrical installations and any relevant co-ordinationissues.

We offer the complete timber engineering package from soleplate to roof structure. We develop solutions with the building designerby way of early meetings to agree dimensions and architectural requirements. Timber frame drawings will be prepared and thedetailed / engineered structural design agreed with the building designer before progressing to fabrication stage. We are able toprovide warranties for all designs (subject to clauses).

Ridgeons Timber Engineering Division offer fully integrated CAD engineering drawings, which enable us to provide manufacturingdetails for frame production quickly and accurately, increasing the predictability and pace of building programmes.

Timber frame offers a fixed price, fixed term solution for the supply and erection of the superstructure to a building.

Once the design is agreed, production details are produced in the form of material schedules, cutting data, panel fabrication detailsand structural nailing requirements. Timber is cut to length using automated saws, panels are then framed and structurally clad beforethe attachment of a breather membrane.

We also certify material sourcing in accordance with recognised supply chain schemes. We operate chain of custody certificationunder PEFC and FSC.

Installation is carried out by our specialist teams in accordance with the build programme. All relevant Health & Safety documentsrelating to our works, which include method statements, risk assessments, lifting plans etc are all part of the service. We do ask thatthe client provides all scaffolding and fall arrest systems, but these details are confirmed prior to us commencing on site.

TIMBER FRAME


Building materialsTimber

I-JOISTS

Ridgeons are distributors for JJI-Joists™ that are manufactured in the UK by James Jones & Sons Ltd - Timber SystemsDivisions.

What is a JJI-Joist™?A JJI-Joist™ is a structurally engineered timber beam, combining high-grade softwood with an engineeredcomposite panel to produce an innovative alternative to conventional construction timber. JJI-Joist™ are available ina range of sizes familiar to the UK Construction Industry. The family of JJI-Joist™ are available in a variety of depthsfrom 145mm to 450mm; examples of which include:

Why use a JJI-Joist™?A JJI-Joist™ offers many design and performance advantages over conventional timber sections, such as:• Superior strength to weight ratio enables longer spans• Straighter and more consistent performance• Lighter and easier to handle with eased edges• Lengths up to 12m• Elimates squeaky floors when fitted correctly• Stable composition resists shrinkage and warping• Cost effective saving on time, labour and materials• No mid-span noggins required• Convenient easy to cut, drill and install using conventional woodworking tools• Versatile – Design flexibility in floor, wall and roof applications. Performance is controllable• Environmentally Friendly – Using 40–60% less material and less site wastage• Quality Assured – An engineered system which is factory produced• Guaranteed – Backed by a lifetime guarantee

BLOCKS


Thermalite blocks are a sustainable building material that can help designers and

specifiers meet all levels of the Code for Sustainable Homes (The Code).

So whatever U-value imposed, Thermalite has a cost-effective solution.

Thermalite blocks are manufactured in a wide range of sizes and strengths with solutions

available for wall, floor and below ground constructions.

Thermalite sustainability benefits

• Up to 80% recycled content

• Can help meet all levels of the Code for Sustainable Homes

• Excellent BRE Green Guide ratings up to A+

• Thermalite blocks are a natural insulating product that help save energy

• Thermalite helps reduce heat loss at junctions of building elements

• 99% of the raw materials are UK sourced

• Thermalite has excellent air permeability - 0.10m3/hr/m2

• Excellent fire resistance – classified as A1 non-combustible

• Durable – will exceed the assumed 60 year life expectancy of a building

• Can be recycled after use

• Low embodied energy

• Good thermal mass helps control overheating in the summer

• Thermalite can achieve low levels of air tightness

• All Thermalite sites are certified to ISO 14001 (Environmental management system)

• All Thermalite blocks are certified to BES 6001 (Responsible Sourcing of Materials)

• Thermalite blocks are manufactured to ISO 9001 Quality Management System and all

manufacturing locations have a BSI kitemark licence

THERMALITE BLOCKS

Thermalite Trenchblock Tongue and Groove

Trenchblock Tongue and Groove aircrete bocks are a revolutionary thermal building block for

constructing solid foundation walls. They are equivalent in size to two standard size aggregate blocks,

plus concrete infill – meaning savings are made on wall ties, concrete infill and waste.

Trenchblock Tongue and Groove benefits

• Quick to lay

• Less mortar required

• Less waste

• Easy to cut and handle

• Ideal for brownfield sites

• Can minimise heat loss at junctions

THERMALITE TRENCHBLOCK TONGUE AND GROOVE


Building materialsBlocks

• External walls built with Thermalite can achieve

the highest Green Guide rating A+, and the

maximum of 3 Code Mat 1 credits.

• Separating walls built to Robust Details E-WM-10,

E-WM-6 and E-WM-15 using Themalite all gain

better Green Guide ratings than generic aircrete.

• E-WM-10 and E-WM-15 with Thermalite gives 2

Code Mat 1 credits; 1 credit higher than generic

aircrete.

• E-WM-6 using Thermalite gives 1 Code Mat 1

credit; 0.5 credits higher than generic aircrete.

• Thermalite Environmental Profile certificates can

be downloaded from www.greenbooklive.com

(Certificate number ENP 168)

THERMALITE GREEN GUIDE 2009 RATINGS AND CODE FOR SUSTAINABLE HOMES CREDITS

Brickwork outer leaf, insulation, aircrete blockwork inner leaf, cement mortar, plasterboard on battens, paint.

Cement rendered aircrete blockwork cavity wall, insulation, cement mortar, plasterboard on battens, paint.

Insulated polymeric render system, 215mm aircrete blockwork with cement mortar, insulation, plasterboard on battens, paint.

Robust Detail E-WM-10: Twin leaf 100mm solid aircrete blocks (600-800kg/m³), thin joint system, with 75mm min. cavity, proprietary wall ties, 8mm sand:cement render, gypsum-based board (8kg/m²) on dabs with paint to each side.

Robust Detail E-WM-6: Twin leaf 100mm solid aircrete blocks (600-800kg/m³),with 75mm min. cavity, Type A wall ties, 8mm cement:sand render and gypsum-based board (8kg/m²) on dabs with paint,to each side.

Robust Detail E-WM-15: Twin leaf 100mm solid aircrete blocks (600-800kg/m³), with 75mm min. cavity including proprietary glass wool acoustic batts, Type A wall ties, with gypsum-based board (9.8kg/m²) on dabs with paint, to each side.

Aircrete blockwork, plasterboard and paint.

Wall and building type Block type

Generic

Thermalite

Generic

Thermalite

Generic

Thermalite

Generic

Thermalite

Generic

Thermalite

Generic

Thermalite

Generic

Thermalite

806170615

906170108

806180035

906180001

806450637

906450638

818190023

918190002

818190020

918190003

918190001

918190004

809180003

909189004

A+

A+

A+

A+

A+

A+

B

A

C

B

B

A

B

B

3

3

3

3

3

3

1

2

0.5

1

1

2

1

1

Elementnumber

GreenGuide rating

External wall,all building types



Separating wall,domestic

Separating wall,domestic

Internal wall, all building types

Generic Green Guide rating met Generic Green Guide rating exceeded

BLOCKS


NEW BUILD U-VALUES

There are many ways of achieving the required improvement in CO2

emissions specified in the Code because there is a multitude of

options in terms of materials and renewables available as well as

site-specific aspects such as orientation of the building. However,

the work carried out by Energy Saving Trust acts as a starting point

and gives design U-values as follows:

Code Building Energy Saving

level element Trust solution

Roof 0.13

3 Walls 0.25

Exposed floors 0.20

Roof 0.13

4 Walls 0.20

Exposed Walls 0.20

Roof 0.13

5 and 6 Walls 0.15

Exposed floors 0.15

Hanson EcoHouse - Code Level 4

h

h

h

Part

ial fi

ll ca

vity

Full

fille

d c

avit

ySo

lid w

all

Bea

m &

infi

ll b

lock

Building fabric

Floors Roof Walls Windows Doors Airtightness

Heating system

Primary

All with time and temperature zone control

Secondary

Mechnical ventilation and heat recovery (MVHR)

Renewables

Thermal bridging

Solution 3

0.2 0.11 0.25 1.5 1.2 5

High efficiency gas combi boiler

Mains gas front fire with fan flue

No

4.5m2 = Solar Panels

y = 0.04

Code Level 3 solution No renewables

Code Level 3 - 0.25W/m2KConstruction Detail

Brick outer leafClear cavityMinimum 55mm Ecotherm100mm Thermalite ShieldPlasterboard on dabs

Beam and infil block - 0.20W/m2KEcotherm Ecoversal20mm Tongue and GrooveChipboard OR screed finish Thermalite floorblock

Brick outer leaf100mm Superglass Superwall 32100mm Thermalite ShieldAny normal finish

Render finish65mm Phenolic insulation215mm Thermalite TurboAny normal finish

The tables below show examples of how Thermalite blocks can help you

achieve code levels 3, 4, 5 and 6.

JARGONBUSTED!GWPGlobal Warming Potential

? !*#


Building materialsBlocks

Part

ial fi

ll ca

vity

Full

fille

d c

avit

ySo

lid w

all

Bea

m &

infi

ll b

lock

Building fabric


Heating system

Primary


Secondary


Renewables

Thermal bridging

Solution 4

0.2 0.11 0.2 1.5 1.4 5

Ground source heat pump with auxiliary heater (300%) emitters underfloor heating

No secondary heating has been specified for code levels 4-6, the default of secondary heating has therefore been assumed

No

No

y = 0.04

Code Level 4 solution Code Level 4 - 0.20W/m2K Construction Detail


Ecotherm Ecoversal20mm Tongue and Groove Chipboard OR screed finishThermalite floorblock

Brick outer leaf125mm Superglass Superwall 32100mm Thermalite Shield Any normal finish


h

h

h

Part

ial fi

ll ca

vity

Full

fille

d c

avit

ySo

lid w

all

Bea

m &

infi

ll b

lock

Building fabric


Heating system

Primary


Secondary


Renewables

Thermal bridging

Solution 5

0.2 0.11 0.2 1.5 1.4 5



Yes

3kWp = Photovoltaic (PV)

y = 0.04






h

h

h

Part

ial fi

ll ca

vity

Full

fille

d c

avit

ySo

lid w

all

Bea

m &

infi

ll b

lock

Building fabric


Heating system

Primary


Secondary


Renewables

Thermal bridging

Solution 6

0.150.11 0.15 1.1 1.2 3



Yes

5kWp = Photovoltaic (PV)

y = 0.04






ECOTHERM ECO VERSAL ROOFING/FLOORING BOARD

DescriptionEco-Versal is rigid polyisocyanurate foam with aluminium foil

composite on both sides. It is a universal high performance

insulation used for a pitched roofs, floors, dormer cheeks

and ceilings.

ApplicationsApplications include upgrading the thermal performance of

existing building elements, providing a cost effective means

of reducing CO2emissions and for compliance with Building

Regulations. Ideal for:

• Floors

• Pitched roof/Cold flat roofs

• Walls

• Room-in-the-roof applications

• Both new build and renovations

Dependant on the designed inulation value and the available

headroom, rafter and/or barge board depth, different

approaches can be taken.

Single Layer InsulationThe boards are placed covering the whole roof area with the

joints staggered and lightly butted. The insulation is then

fixed by use of a vertical batten (minimum size 50mm x 25mm)

placed above the insulation down the line of each rafter.

The boards are secured by fixing through both the vertical

battern and the EcoTherm insulation board. Install the

breathable membrane as per manufacuter's instructions.

The counter battens form the base for the fixing of the tile or

slate laths.

Fix using proprietary fixings

ensuring a minimum

38mm depth

of penetration.

Between & Under Rafter InsulationCut the insulation tight between the rafters leaving a

50mm clear cavity above the insulation and below the

breathable membrane. Fix a secondary layer of

Eco-Versal to the underside of the rafter

and cover with 12.5mm plaster

board or use EcoTherm's

Eco-Liner Fix thermal

laminate board.

INSULATIONBUILDING MATERIALS


Between & Over Rafter InsulationThe procedure for double layer insulation is similar to

between and under. i.e. Cut the insulation tight

and push up against the top rafters. Install

the other-thicker-layer of insulation

over the top and secure with a

vertical batten down the line

of each rafter. Install the

breathable

membrane as per

manufacturers

instructions.

superior rigid insulation


ECOTHERM ECO VERSAL ROOFING/FLOORING BOARD

Building materialsInsulation

CODE OVERALL LENGTH WIDTH R VALUE TYPICAL U VALUE TYPICAL U VALUE EXC VATTHICKNESS (mm) (mm) (W/m2k) SINGLE LAYER BETWEEN AND(mm) OVER RAFTERS (W/m2k) UNDER RAFTERS (W/m2k)

BB011789 25 2400 1200 1.14 0.60 0.36 £27.53

BB011793 30 2400 1200 1.36 0.52 0.34 £30.72

BB011794 35 2400 1200 1.59 0.47 0.32 £33.52

BB011782 40 2400 1200 1.82 0.42 0.30 £35.36

BB011795 45 2400 1200 2.05 0.39 0.29 £40.88

BB011788 50 2400 1200 2.27 0.36 0.27 £43.36

BB011784 60 2400 1200 2.73 0.31 0.25 £51.02

BB011796 65 2400 1200 2.96 0.29 0.24 £55.58

BB011787 70 2400 1200 3.18 0.27 0.23 £59.01

BB011781 75 2400 1200 3.41 0.25 0.22 £62.80

BB011783 80 2400 1200 3.64 0.24 0.22 £70.56

BB011785 90 2400 1200 4.09 0.22 0.20 £78.20

BB011786 100 2400 1200 4.55 0.20 0.19 £86.82

BB011791 110 2400 1200 5.00 0.18 0.18 £91.59

BB011790 120 2400 1200 5.46 0.17 0.17 £100.83

BB011797 130 2400 1200 5.91 0.15 0.16 £109.80

BB011798 140 2400 1200 6.36 0.14 0.15 £118.83

BB011799 150 2400 1200 6.82 0.14 0.15 £127.92

BB011800 160 2400 1200 7.27 0.13 0.14 £137.13

BB011801 170 2400 1200 7.73 0.12 0.13 £146.44

BB011802 180 2400 1200 8.18 0.11 0.13 £155.82

BB011803 190 2400 1200 8.64 0.11 0.13 £165.30

BB011804 200 2400 1200 9.09 0.10 0.12 £174.86

Fixing methods for floorsThe product is suitable for use

in domestic gorund-supported

or suspended concrete slab

ground floors and for use

between the joists of suspended

timber ground floors.

Solid floor(above slab)

Solid floor(below slab)

Suspended block& beam

Suspendedtimber


INSULATIONBUILDING MATERIALS


ECOTHERM ECO-LINER DAB

CODE OVERALL LENGTH WIDTH R VALUE TYPICAL U VALUE TYPICAL U VALUE EXC VATTHICKNESS (mm) (mm) (W/m2k) SOLID BRICK = 225mm RENDER DENSE CLEAR CAVITY(mm) (W/m2k) MEDIUM BLOCK (W/m2k)

Eco-Liner DAB Laminate

BB019920 42.5 2440 1220 1.18 0.58 0.52 £67.36

BB019921 52.5 2440 1220 1.55 0.47 0.43 £73.48

BB019922 62.5 2440 1220 1.92 0.40 0.37 £79.61

BB019923 82.5 2440 1220 2.66 0.31 0.29 £95.93

Eco Liner Dab insulated plasterboard is suitable for solid wall insulation. The product consists of a PIR foam core.

This is faced with 12.5mm tapered edge plasterboard bonded using proprietary gypsum adhesive.

Applications

Room side insulation responds quickly to heating systems and applications include upgrading the thermal performance of existing

walls, providing a cost effective means of reducing CO2emissions and for compliance with Building Regulations. Ideal for:

• Walls

• Pitched roofs/Cold flat roofs



Description

Composite insulated panel comprising PIR foam bonded to 12.5mm

tapered edge gypsum plasterboard for internal dry lining applications.

It is available in thicknesses of 37.5mm to 112.5mm in board sizes of

2400x1200mm.

Eco-Liner Dab features

• Offers excellent thermal resistance in practical thicknesses

• Available for dab and mechanically fixed dry lining applications

• Insulate and dry line in one simple application

• Quick and cost effective

• Easily achieves the UK Building Regulations thermal standards

• Zero ODP

ECOTHERM ECO-LINER DAB - INSULATED PLASTERBOARD



Building materialsInsulation

ECOTHERM ECO-LINER FIX

CODE OVERALL LENGTH WIDTH R VALUE TYPICAL U VALUE TYPICAL U VALUE EXC VATTHICKNESS (mm) (mm) (W/m2k) SOLID BRICK = 225mm RENDER DENSE CLEAR CAVITY(mm) (W/m2k) MEDIUM BLOCK (W/m2k)

Eco-Liner FIX Laminate

BB019924 37.5 2440 1220 1.15 0.46 0.42 £63.28

BB019925 42.5 2440 1220 1.37 0.42 0.39 £67.36

BB019926 52.5 2440 1220 1.80 0.35 0.33 £73.48

BB019927 62.5 2440 1220 2.24 0.31 0.29 £79.61

BB019928 82.5 2440 1220 3.11 0.24 0.23 £95.93

Eco-Liner Fix insulated plasterboard is suitable for solid wall insulation. The product consists of a PIR foam core.

This is faced with 12.5mm tapered edge plasterboard bonded using proprietary gypsum adhesive.

Applications

Room side insulation responds quickly to heating systems and applications include upgrading the thermal performance of existing

walls, providing a cost effective means of reducing CO2emissions and for compliance with Building Regulations. Ideal for:

• Walls

• Pitched roofs/Cold flat roofs



Description

Composite insulated panel comprising PIR foam bonded to 12.5mm

tapered edge gypsum plasterboard for internal dry lining applications.

It is available in thicknesses of 37.5mm to 112.5mm in board sizes of

2400x1200mm.

Eco-Liner Dab features

• Offers excellent thermal resistance in practical thicknesses

• Available for dab and mechanically fixed dry lining applications

• Insulate and dry line in one simple application

• Quick and cost effective

• Easily achieves the UK Building Regulations thermal standards

• Zero ODP

ECOTHERM ECO-LINER FIX - INSULATED PLASTERBOARD


PRODUCT PRODUCT PRODUCT


SUPERGLASS INSULATION

SUSTAINABILITY

Mineral wool is the United Kingdom’s leading choice of building insulation product due to its recognized versatility and all

round performance. There are many different insulation types on the market today, but only mineral wool products have

sustainability credentials combined with proven thermal, acoustic & fire properties, providing the best insulation value.

With increasing pressures on our fragile environment, focus is sharpening on the ways in which more

environmentally friendly products and methods can be developed. In the building industry this translates to

sustainable building practices and ‘sustainable development’.

Superglass mineral wool insulation products contribute significantly towards ‘sustainable building practices’

and can assist architects and designers in their pursuit of buildings that:

1 demonstrate reduced energy consumption

2 result in reduced green house gas emissions

3 contain higher levels of recycled material

4 require reduced consumption of natural resources

ENERGY

Energy efficiency is a major element in the global battle against climate

change. One of the most important environmental benefits of Superglass

products is the reduction of energy used to maintain the temperature of a

building when mineral fibre has been installed. A comforta ble living environment and

reduced levels of energy consumption can be gained from a well insulated building.

Substantial levels of energy are saved during a Superglass product’s lifetime compared to the energy input required for its

production. For each tonne of CO2emitted during manufacture, Superglass can save up to 200 tonnes of CO

2during its

lifetime use.

GREENHOUSE GASES

Global warming is now acknowledged by many as one of the world’s most pressing environmental problems and reduced

energy consumption means less greenhouse gas emissions to atmosphere. The optimum use of mineral wool insulation in

buildings will greatly reduce the greenhouse gases associated with heating and ventilation. Superglass insulation products do

not contain agents that produce greenhouse gases and are recognized as inherently having a Global Warming Potential (GWP)

and Ozone Depletion Potential (ODP) of zero.

RECYCLED CONTENT

The use of recycled material in building products makes environmental sense. Maximising recycled content minimises the use of

the natural resources that would normally be used in the manufacture of Superglass products. This diverts the recycled material

away from scarce land fill sites and allows for a more energy efficient manufacturing process. Superglass insulation products

have in excess of 80% recycled material in the finished item. This recycled content includes large quantities of:

• Post consumer waste i.e. glass bottles collected and processed locally

• Pre consumer waste i.e. production scrap from the primary manufacturing process

INSULATIONBUILDING

PRODUCT PRODUCT PRODUCT


Building materials

CONSUMPTION OF NATURAL RESOURCES

In a world where the unfettered use of finite quantities of raw materials is unsustainable, steps are needed to protect and use

these valuable natural resources as efficiently as possible.

Whether these natural resources are carbon based fuels or other extracted minerals Government is now looking for ways

through statutory and regulatory means that will contribute to their conservation for future generations.

Superglass insulation is an integral component in the armoury of any builder or designer looking to help conserve these resources.

CONCLUSION

Superglass products contribute to the goals of energy savings, emission reductions, air quality improvement and

sustainable development. They are widely available with a proven technology that begins saving money and

emissions from the moment they are installed in a building and continue to do so for the lifetime of that building.

SUPERGLASS INSULATION

Insulation


BB018424 5810 Multi Roll 44 1200 x 9170 x 100mm (11m2 pk) £52.08

BB018425 5815 Multi Roll 44 1160 x 6030 x 150mm (7m2 pk) £50.05

BB018426 5817 Multi Roll 44 1160 x 5300 x 170mm (6.15m2 pk) £50.51






BB018441 3492 Timber & Rafter Roll 40 1140 x 9250 x 90mm (10.55m2 pk) £62.81




BB018445 3297 Timber & Rafter Batt 40 570 x 1175 x 90mm (12.06m2 pk) £77.31







BB018452 3639 Timber & Rafter Batt 32 570 x 1175 x 100mm (4.02 m2 pk) £59.25

BB018454 5510 Multi Acoustic Roll 1200 x 11250 x 60mm (13.5m2 pk) £50.94

BB018455 5511 Multi Acoustic Roll 1200 x 10400 x 80mm (12.48m2 pk) £62.93

BB018456 5512 Multi Acoustic Roll 1200 x 9170 x 100mm (11m2 pk) £58.79

BB018457 5526 Multi Purpose Acoustic Mat 1200mm x 22.5m x 25mm (27.00m2 pk) £49.77

BB018458 5552 Multi Purpose Acoustic Mat 1200mm x 13m x 50mm (15.60m2 pk) £45.01

BB018459 5185 Sound Deadening Mat 1130 x 10600 x 25mm (12.00m2 pk) £100.97

BB019151 5267 Superwall 036 PACK 455 x 1200 x 50mm (8.74m2 pk) £34.44









VELUX CENTRE-PIVOT ROOF WINDOWS

VELUX Centre-pivot roof windows offer excellent quality, versatility and valuefor money.

• One gentle pull of the top control bar allows background ventilation whilst the windowremains securely closed. One further pull opens the window.

• Rotates 180º and locks in place for easy cleaning of outer pane.

• Clear and clean coating is standard on --73 and --60 panes. Keeps windows cleaner for longer.

• The --65 pane now comes with new Clearview coating, ensuring a clear view at all timesof the day.


• Flashings, insulation and vapour barrier required. Light and heat control recommended(blinds, awnings and shutters)

Pine (GGL)

• Made of high-quality natural pine with clear lacquer finish.

• Classic and versatile.

White (GGU)

• High quality moulded polyurethane with timber core.

• Stylish white finish with smooth rounded corners.

• Moisture resistant - ideal for rooms with high humidity

• Complements other white windows in the buildings

ROOFWINDOWS



VELUX CENTRE-PIVOT ROOF WINDOWS

Building materialsWindows

Centre-pivot CO2 CO4 CO6 M04 F06 M06 M08 U04 S06 P10 U08

Pine

GGL 3059 Toughened outer pain

U-value 1.4W/m2K £180 £190 £200 £210 £225 £240 £265 £305 £310 £325 £370

GGL 3073 Laminated inner, toughened outer pane

U-value 1.4W/m2K Clear and clean coating £220 £230 £240 £255 £270 £285 £310 £365 £370 £385 £430

GGL 3060 Laminated inner, toughened outer pane

U-value 1.3W/m2K Clear and clean coating, noise reduction £240 £250 £260 £285 £300 £315 £340 £405 £410 £425 £470

GGL 3065* Triple glazed. Laminated inner, toughened

U-value 1.0W/m2K outer pane. Clearview coating £350 £360 – £410 £425 £440 £465 £555 £560 £575 –

GGL 3041Q† Laminated inner, toughened outer pane

U-value 1.6W/m2K Enhanced Safety and security - £420 – £460 £475 £490 £515 £605 £610 £625 £670

White

GGU 0059 Toughened outer pain

U-value 1.4W/m2K £205 £215 £230 £245 £260 £275 £305 £350 £355 £375 £425

GGU 0034 Obscure inner, toughened outer pane

U-value 1.4W/m2K £240 £250 £265 £285 £300 £315 £345 £405 £410 £430 £480

GGU 0073 Laminated inner, toughened outer pane

U-value 1.3W/m2K Clear and clean coating £245 £255 £270 £290 £305 £320 £350 £410 £415 £435 £485

GGU 0060 Laminated inner, toughened outer pane

U-value 1.0W/m2K Clear and clean coating, noise reduction £265 £275 £290 £320 £335 £350 £380 £450 £455 £475 £525

GGU 0065* Triple glazed. Laminated inner, toughened

U-value 1.6W/m2K Outer pane. Clearview coating £375 £385 – £445 £460 £475 £505 £600 £605 £625 –

Accessories for GGL/GGU Centre-pivot

ZCT 200 100-180cm telescopic rod for operation of GGL/GGU Centre-pivot roof windows £25

ZCT 100 100cm extension for ZCT 200 £15

ZOZ 012 Security lock – Key operated window lock for GGL/GGU Centre-pivot roof windows only £28

ZOZ 010 SO11 Opening restrictor with key for GGL/GGU Centre-pivot roof windows only £28

External frame size (nominal w x h) cm 55x78 55x98 55x118 78x98 66x118 78x118 78x140 134x98 114x118 94x160 134x140

WINDOWS


DREAMVU™ HIGH PERFORMANCE WINDOWS & DOORSETS

DreamVu™, designed for the UK market with its traditional

design and using the latest window and doorset technology.

This range breaks new ground in volume produced, mass

availability joinery at prices to reflect JELD-WEN’s highly

competitive position in the market.

Designed to offer architects and developers a solution to meet

the requirements for the Code for Sustainable Homes using a

market leading UK manufacturer. It also gives the self-builder

an environmentally friendly energy saving solution to fit their

design requirements.

This range is designed to be made to specification, with a

wide range of glazing options, giving high thermal and

acoustic performance.

ALL TIMBER & ALUMINIUM CLAD WINDOWS

• Chain of custody certified sustainable timber

• FSC engineered laminated softwood frame

• Flush sash design to all timber

• Aluminium clad timber option - externally

aluminium clad with any RAL colour available

• Internally beaded sash

• 24mm - 36mm insulated glazing unit capability with

range of gas filled options dependent on whole window

U value required

• Optional aluminium sill available in 3 sizes

• Side or top hung sashes fitted with projecting hinges

• Fixed sashes or direct glazed area option

• Yale ironmongery fitted, available in chrome effect,

gold effect or white

PERFORMANCE:

• U value range from 1.8-0.7W/m2K

• Exposure rating 2000pa

• Air permeability Class 4

• Tested to BS6375 : Part 1:2004 Performance of windows

and doors

• Tested to BS6375 : Part 2:1987 Operation and strength

performance

• Tested to Secured by Design scheme standards - BS7950

certification held

• Acoustic performance available to 40dB Rw

DreamVu™ timber window detail:


Building materials

DOORSETS

To complement the DreamVu™ window range, JELD-WEN

also offers a range of doorsets, both in timber and aluminium

clad timber with similarly high levels of performance and low

U values.

Generally these products are tested and certified to both

PAS23 and PAS24 and achieve U values down to 1.0W/m2K,

dependent on glass specification.

In addition, french casement pairs of doors with combined

side lights are also available, all matching the DreamVuTM

window range. Letter plates are not recommended as these

compromise the air tightness of the building. Separate

provision should be made for mail deliveries.

DREAMVU™ HIGH PERFORMANCE WINDOWS & DOORSETS

Windows

DreamVu™ aluminium clad timber detail:

6 year guarantee onhi-build stain

10 year guarantee againstmanufacturing defects and hi-buildfactory painted external joinery inaccordance with EN 927/1-7, plus 10year guarantee on insulating glass units

40 year guarantee against rotand fungal attack on all externaltimber components, andaluminium external clad finish

TimberWindow Uvalue

IGU CP Uvalue

GlassSpecification

Ventilation

0.7 0.4Triple glazed

(inert gas filled)Air tight,unvented





1.1 1Triple glazed

(inert gas filled)

4000mm2 upto915mm W,

8000mm2 above

1.3 1.2Double glazed(inert gas filled)

as above

1.5 1.4Double glazed(argon filled)

as above

1.6/1.7 1.6Double glazed

(air filled)as above

1.8/2.0 1.6Double glazed

(air filled)as above

GOOD FOR 60 YEARS!An optional 60-year Lifespan guarantee against rot and fungal attack and a 15-year paint finish guarantee is available on the DreamVu™ doorset.

Ask a member of staff for more information now.

NEWBUILD FRAMES LTD - A RATED ENERGY RATED WINDOW SYSTEM

Why reduce energy use in new housing?There are many reasons why it is important to

reduce energy use in the UKs housing stock,

but probably the most important is listed

under the following heading.

Climate changeIt is now generally accepted that man-made

CO2 emissions are the main cause of climate

change. CO2and to a lesser extent other

gases such as methane and nitrous oxide, in

the atmosphere create a greehouse effect.

Most scientists now agree that there is a

direct correlation between higher CO2

concentrations in the atmosphere and

increasing global temperature and that to

restore balance, man-made emissions of CO2

must be reduced as a matter of urgency.

WINDOWS


Choosing energy efficient windows is a simple, practical wayto make a differenceThe Government has set itself a specific target of ensuring all new

homes built after 2016 are zero carbon. This is in addition to the

general requirement of an overall carbon emission reduction as set

out by the Kyoto agreement

The highlight this topic and enable a system which is both an

independent source of information and also easy to understand, the

BRFC (British Fenestration Rating Council) working in conjuction with

Energy Efficiency Council, have created a performance label clearly

defining the energy efficiency of building products from any

manufacturer.

Launched in March 2004, the Window Energy Rating label is similar

to that used on many goods in our homes, such as fridges and

washing machines. Building products are scored on a scale of A-G,

with an A rated building product being more energy efficient than

one which is G rated.

Those which are given a rating of C and higher are recognised as

energy efficient, and can officially be endorsed with Energy Saving

Recommended logo.

Choosing energy efficient windows is a simple, practical way to make a difference

• Increased WER

• Reduced Heat Loss

• Lower heat conduction

• Increased solar gain

• Reduced condensation

• Lower vapour transmission

• Market-leading components

• C-rated or better BFRC energy ratings

• Total flexibility in size and styles

• More appealing aesthetics, lower sightlines

• A 10 year customer guarantee

• Comprehensive installer sales support

• HIPs pack certificate


NEWBUILD FRAMES LTD - A RATED ENERGY RATED WINDOW SYSTEM

Building materialsWindows

PAINT


DULUX LIGHT & SPACE PAINT

Make a small room feel bigger

Dulux Light & Space is the revolutionary paint that makes a room reflect twice as much light compared to conventional emulsions

and thus making your room feel more spacious.

Available in a range of 17 colours, you no longer need to just use white to be bright! All our colours are cleaner and purer then

normal pastel shades, and when you combine this with our Lumitec technology you get a truly unique look to your room.

• Unique LumiTec Technology reflects substantially more light back into and around the room

• Light & Space paint absorbed 8% of the visible light compared to the conventional emulsion which absorbed 16%

• Its innovative formulation allows the use of up to 22% less energy - thats equivalent to reducing the wattage of the bulb from

50W down to only 40W

• Using Light & Space makes it possible to have up to 20% smaller windows and still achieve the same levels of light

Colour PaletteLight absorption= 8%

Colour PaletteLight absorption= 16%


Building materialsPaint

DULUX LIGHT & SPACE PAINT


P6602701 5090432 Dulux 5090432 Trade Flat Matt Lumitec Light And Space Emulsion 5 Litre Light Base Colour £43.49

P6602699 5090433 Dulux 5090433 Trade Diamond Matt Lumitec Light And Space Emulsion 5 Litre Light Base Colour £55.99

P6602700 5091273 Dulux 5091273 Trade Flat Matt Lumitec Light And Space Emulsion 5 Litre Absolute White £31.99

P6602698 5091276 Dulux 5091276 Trade Diamond Matt Lumitec Light And Space Emulsion Lumitec 5 Litre Absolute White £44.49

Light & SpaceVinyl MattEveryday, standard

product. Great for low

traffic areas that just

need brightening up.

Light & SpaceFlat MattFashionable and stylish

matt finish.

Aesthetically pleasing,

‘dead’ flat finish.

Perfect for hiding

surface imperfections

in period properties.

Light & SpaceDiamond Matt andDiamond EggshellUnrivalled durability in a

matt or eggshell finish.

Perfect for high traffic

areas such as hallways,

corridors and stair wells.

Eggshell great for areas

of high condensation,

bathrooms and kitchens.

Light & SpaceEcosureSustainable alternative

to Vinyl Matt. Again,

for areas where

durability isn’t a priority.

PAINT


DULUX ECOSURE

Ecosure, the paint range that is better for the environment with the results you need.Developed by Dulux Trade in conjunction with leading sustainability experts Forum for the Future, Ecosure represents an

environmentally responsible step forward while achieving ‘best in class’ performance. The range comprises a high opacity Matt

with an impressive spreading rate, together with a new generation water-based Gloss and Undercoat system which offers a high

gloss level and excellent flow and a new Eggshell that provides a durable mid-sheen finish. In tests using the Environmental Impact

Analyser, Ecosure was shown to deliver significant reductions in CO2and VOCs.

For further information visit www.duluxtrade.co.uk/ecosure



DULUX ECOSURE


P6602903 5088993 Dulux 5088993 Trade Ecosure Vinyl Matt Emulsion 5 Litre Pure Brilliant White £27.49

P6602902 5088995 Dulux 5088995 Trade Ecosure Vinyl Matt Emulsion 10 Litre Pure Brilliant White £55.49

P6602905 5088998 Dulux 5088998 Trade Ecosure Vinyl Matt Emulsion 5 Litre Magnolia £28.99

P6602904 5088999 Dulux 5088999 Trade Ecosure Vinyl Matt Emulsion 10 Litre Magnolia £55.49

P6602906 5089006 Dulux 5089006 Trade Ecosure Vinyl Matt Emulsion 5 Litre Light Base Colour £38.49

P6602907 5089007 Dulux 5089007 Trade Ecosure Vinyl Matt Emulsion 5 Litre Medium Base Colour £38.49

P6602908 5089008 Dulux 5089008 Trade Ecosure Vinyl Matt Emulsion 5 Litre Extra Deep Base Colour £38.49

P6602910 5089009 Dulux 5089009 Trade Ecosure Vinyl Gloss 2.5 Litre Pure Brilliant White £27.49

P6602914 5089015 Dulux 5089015 Trade Ecosure Gloss 2.5 Litre Extra Deep Base Colour £32.99

P6602912 5089016 Dulux 5089016 Trade Ecosure Undercoat 2.5 Litre Pure Brilliant White £27.49

P6602911 5089017 Dulux 5089017 Trade Ecosure Undercoat 5 Litre Pure Brilliant White £46.49

P6602915 5089018 Dulux 5089018 Trade Ecosure Undercoat 2.5 Litre Medium Base, Colour £37.49

P6602909 5089020 Dulux 5089020 Trade Ecosure Vinyl Gloss 5 Litre Pure Brilliant White £46.49

P6602913 5089021 Dulux 5089021 Trade Ecosure Gloss 2.5 Litre Medium Base Colour £32.99

P6602916 5089024 Dulux 5089024 Trade Ecosure Undercoat 2.5 Litre Deep Base Colour £37.49





Ecosure Matt• Packaging contains at least 25%

recycled materials

• Recoat in 2 - 4 hours

• Coverage up to 17m2/L

• Available in more than 10,000 colours

• Available in Light & Space colours





Ecosure Gloss & Undercoat• Smoother, glossier finish than

conventional water-based gloss

and undercoat

• Cans contain 50% recycled material

• Recoat in 4-6 hours


• Gloss available in more than

9,000 colours

Ecosure Quick Drying Eggshell• Tough and durable

• Can contains at least 25%

recycled material

• Recoat in 4-6 hours


Available in more than 10,000 colours

ECOLIBRIUM PAINT

Ecolibrium Natural Paint is the latest addition to the award winning* Ecolibrium range from Blackfriar Paints. Building on the

success of the Ecolibrium range of eco-friendly garden furniture treatments, comes the result of over three years’ research and

development designed to deliver a premium quality, naturally-formulated, paint that not only looks incredible but performs

brilliantly - whilst at the same time being exceptionally kind to the environment.

Unlike conventional paint - which is normally made with derivatives of petrochemical oil - Ecolibrium Natural Paint is made with

sustainable plant oils, water and earth pigments. In fact, it contains over 90% natural ingredients. While other paints continue to

rely heavily on diminishing, non-renewable resources in their production, Ecolibrium works hard to restore the natural balance.

Where in the past natural paints have delivered on either sustainability or performance, the key difference with Ecolibrium is

that it delivers on both fronts. The paint has minimal environmental impact and delivers superior opacity, colour consistency,

finish and ease of application when compared to its more synthetic counterparts. In short, it behaves exactly how you’d expect

a premium paint to do, but in an environmentally friendly manner.

Ecolibrium Natural Paint is available in Natural Matt Emulsion (2.5 litres) - for walls and ceilings - and Natural Satin - for doors,

skirting and trims. To assist with colour selection, a full range of Tester tins (125ml) is also available. The range is supported by a

comprehensive range of eco-friendly POS including chip-mounted shade cards and header display boards.

The Ecolibrium colour palette is both inspired and created by the natural environment. Earth pigments and minerals, from

well-managed sources, are blended to produce deep rich shades and soft, light neutrals in a range of beautiful natural colours.

PAINT




ECOLIBRIUM PAINT


BP000218 BF8500002C1 Natural Matt 2.5 litre Natural White £19.99

BP000175 BF8501001C1 Natural Matt 2.5 Litre Devon Cream £19.99

BP000177 BF8501002C1 Natural Matt 2.5 Litre Clotted Cream £19.99

BP000179 BF8501003C1 Natural Matt 2.5 Litre Butternut Squash £19.99

BP000181 BF8501004C1 Natural Matt 2.5 Litre Fresh Linen £19.99

BP000183 BF8501005C1 Natural Matt 2.5 Litre Blanched Almond £19.99

BP000186 BF8501006C1 Natural Matt 2.5 Litre Sandy Taupe £19.99

BP000189 BF8501007C1 Natural Matt 2.5 Litre Raw Calico £19.99

BP000192 BF8501008C1 Natural Matt 2.5 Litre Light Umber £19.99

BP000194 BF8501009C1 Natural Matt 2.5 Litre Chestnut £19.99

BP000197 BF8501010C1 Natural Matt 2.5 Litre Rose Madder £19.99

BP000199 BF8501011C1 Natural Matt 2.5 Litre Venetian Red £19.99

BP000202 BF8501012C1 Natural Matt 2.5 Litre Kiln Pit £19.99

BP000205 BF8501013C1 Natural Matt 2.5 Litre Kendal Mint £19.99

BP000207 BF8501014C1 Natural Matt 2.5 Litre Caledonite £19.99

BP000209 BF8501015C1 Natural Matt 2.5 Litre Dried Leaf £19.99

BP000212 BF8501016C1 Natural Matt 2.5 Litre Avon Stone £19.99

BP000214 BF8501017C1 Natural Matt 2.5 Litre Sand Pear £19.99

BP000216 BF8501018C1 Natural Matt 2.5 Litre Olive Green £19.99

BP000221 BF8501019C1 Natural Matt 2.5 Litre Chalk White £19.99

BP000223 BF8501020C1 Natural Matt 2.5 Litre Solent £19.99

BP000225 BF8501021C1 Natural Matt 2.5 Litre Skye Blue £19.99

BP000227 BF8501022C1 Natural Matt 2.5 Litre Baltic blue £19.99

BP000229 BF8501023C1 Natural Matt 2.5 litre Fjord Blue £19.99

BP000219 BF9500002G1 Natural Satin 750ml Natural White £9.99

BP000184 BF9501005G1 Natural Satin 750ml Blanched Almond £9.99

BP000187 BF9501006G1 Natural Satin 750ml Sandy Taupe £9.99

BP000190 BF9501007G1 Natural Satin 750ml Raw Calico £9.99

BP000195 BF9501009G1 Natural Satin 750ml Chestnut £9.99

BP000200 BF9501011G1 Natural Satin 750ml Venetian Red £9.99

BP000203 BF9501012G1 Natural Satin 750ml Kiln Pit £9.99

BP000210 BF9501015G1 Natural Satin 750ml Dried Leaf £9.99

BP000230 BF9501023G1 Natural Satin 750ml Fjord Blue £9.99

BRABANTIA ROTARY COMPACT 3 ARMCLOTHES DRYER 30 METRE

BRABANTIA SOIL SPIKE 50mm FOR ROTARYCLOTHES LINES

BRABANTIA ROTARY LIFT-O-MATIC ADVANCE 4 ARM CLOTHES DRYER 50 METRE

ROTARY CLOTHES DRYERS


BRABANTIA ROTARY CLOTHES DRYERS


I6911106 310645 Brabantia Rotary Compact 3 Arm Clothes Dryer 30 Metre £38.99

I6907786 311086 Brabantia Rotary Lift-O-Matic Advance 4 Arm Clothes Dryer 50 Metre £94.99

I6912160 311468 Brabantia Soil Spike 50mm For Rotary Clothes Lines £11.75


I6900466 2741041 Hills 4 Arm Supadry Rotary Clothes Dryer 50 Metre £99.99

I6900472 2741110 Hills 3 Arm Airdry Rotary Clothes Dryer 30 Metre £26.99

I6900470 2741282 Hills 3 Arm Portadry Rotary Clothes Dryer 35 Metre £51.99

I6900471 2741298 Hills 4 Arm Portadry Rotary Clothes Dryer 45 Metre £64.99


HILLS ROTARY CLOTHES DRYERS

Building materialsRotary Clothers Dryers

HILLS 4 ARM SUPADRY ROTARY CLOTHESDRYER 50 METRE

HILLS 3 ARM PORTADRY ROTARY CLOTHESDRYER 35 METRE

HILLS 4 ARM PORTADRY ROTARY CLOTHESDRYER 45 METRE

HILLS 3 ARM AIRDRY ROTARY CLOTHESDRYER 30 METRE


WATER WATEREVERYWHERE…Deal with the problem of excess water withSustainable Urban Drainage (SUDS) from Ridgeons

Surface water run off might only account

for 2% of the Code for Sustainable

Homes, but the tangible benefits of

fitting SUDS (Sustainable Urban Drainage

Systems) into a new or existing home are

becoming more and more obvious. News

of wide spread flooding is reported with

increasing frequency and the devastation

this causes is hard to put a price on.

The clean up costs alone can cripple

individuals without adequate insurance.

We think this more than makes the case

for installing SUDS.

Take a look around many suburban areasand you’ll see many concrete driveways,giving excess storm and floodwaternowhere to go. This is what SUDS aredesigned to tackle. By giving the surfacewater somewhere to go there is lesswater left above ground to build up andcause flooding. They are often simple toinstall, which makes them a worthwhilerecommendation to your customers.

There are many different types of SUDS

available and the team at Ridgeons can help

you decide which will work best with your

project. Take a look at our Green Light

products, all of which are recommended

for domestic use.

Surface Water Run-off



176 / 177

Assessment Criteria

Sustainable Drainage Systems (SUDS)

Stormwater Management

Green Roofs

178-179

180-185

186-189

190-193

Sustainable Urban Drainage (SUDS)

As defined in the SuDS manual, sustainable drainage

systems are an approach to surface water management

that combines a sequence of management practices and

control structures designed to drain surface water in a

more sustainable fashion than some conventional

techniques.

These systems infiltrate, store, convey and partially treat

surface water runoff, which minimises environmental

impact and maximises environmental opportunities. SuDS

should aim to maximise the use of on-the-surface

techniques for operational and maintenance reasons.

Contents

Green roofs

Permeable paving

Soakaway

AquaCell

Drainage

WHAT TODO WITHWATER

The assessment criteria andmandatory expectations for

surface water run-off

The aim of this section of the Code for Sustainable Homes is to ensurethat housing developments are designed to avoid, reduce and delay thedischarge of rainfall to public sewers and watercourses. This will protectwatercourses and reduce the risk of localised flooding, pollution andother environmental damage. This section of the Code is vital tosafeguard against the devastating floods of recent years by improving themanagement and re-use of water run-off.


Sur 1 Management of Surface WaterRun-off from Developments

2 Yes



Mandatory elements must be achieved,which are listed below. Up to 2 credits

are available for further improvingmanagement of rainfall run off.

Credits MandatoryLevels

Criteria

Assessment criteria:Surface water run off

Hydraulic Control CriteriaThe SuDS Management Train should be used as a guide to achieve the following:

1) Peak Rate of Run-offIf there is no increase in the man-made impermeable area as a result of the new development, then the peak rate of run-off criterion does not apply.

Where there is an increase in impermeable area, ensure that the peak rate of run-off over the development lifetime, allowing for climate change, willbe no greater for the developed site than it was for the pre-development site. This should comply at the 1 year1 and 100 year2 return period events(see Calculation Procedures).

Where the pre-development peak rate of run-off for the site would result in a requirement for the post-development flow rate (referred to as thelimiting discharge) to be less than 5 l/s at a discharge point, a flow rate of up to 5 l/s may be used where required to reduce the risk of blockage.

Note: If as a result of the new development, there is an increase in the volume of run-off discharged for the 100 year 6 hour event and section 2Acannot be met (see section 2 below), these run-off rates do not apply.

2) Volume of Run-off

If there is no increase in the man-made impermeable area as a result of the new development, then the volume of run-off criteria does not apply.

If the developed site would otherwise discharge, over the development lifetime allowing for climate change, a greater volume of rainwater run-off than the pre-development site for the 100 year 6 hour event, (see Calculation Procedures) then criterion A applies. If A cannot be satisfied then B applies.

A: Ensure that the post development volume of run-off, allowing for climate change over the development lifetime, is no greater than it wouldhave been before the development.

The additional predicted volume of run-off for the 100 year 6 hour event must be prevented from leaving the site by using infiltration or otherSuDS techniques (see Definitions).

OR

B: If A cannot be satisfied (full justification must be provided) then reduce the post development peak rate of run-off to the limiting discharge.

The limiting discharge is the pre-development flow rate equivalent to the 1-year peak flow rate, mean annual flood flow rate (Qbar) or 2 l/s/ha,whichever is the highest flow rate.

For the 1-year peak flow rate the 1 year return period event criterion in section 1 above, applies. For all other events up to the 100 year returnperiod event, the peak rate of run-off for the developed site must not exceed the limiting discharge.

Where the limiting discharge flow rate would require a flow rate of less than 5 l/s at a discharge point, a flow rate of up to 5 l/s may be usedwhere required to reduce the risk of blockage.

Note: Criterion B generally results in more storage than compliance with criterion A.

3) Designing for local drainage system failure.

Demonstrate that the flooding of property would not occur in the event of local drainage system failure (caused either by extreme rainfall or a lack of maintenance).

Note: Where the run-off is being discharged into an existing drainage system, the responsible body may stipulate a more stringent set of hydraulicflow rate criterion which will therefore take precedence.

Water Quality Criteria

1. One credit can be awarded by ensuring there is no discharge from the developed site for rainfall depths up to 5 mm (see Calculation Procedures).

2. One credit can be awarded by ensuring that:

• The run-off from all hard surfaces shall receive an appropriate level of treatment in accordance with The SuDS Manual to minimise the risk ofpollution.

Note: The SuDS Manual best practice recommendations should be followed where there is a risk to groundwater from infiltration (for examplecontaminated land, developments with high risk of pollution incidents)

Default Cases:

The mandatory criteria can be deemed to be met by default if the site discharges rainwater directly to a tidal estuary or the sea. Credits cannot be awarded unless the relevant water quality criteria are met.

1

1

SUSTAINABLE DRAINAGESYSTEMS (SUDS)


Envi

ronm

enta

l

We

need

to m

ainta

in or

impro

ve our w

ater

quali

ty to

pre

serv

e the

natur

al environment

Social

We need to use our natural resources in a way

that does not compromise future availability

which can have catastrophic economic effects

We need to reduce the frequency of major flooding events

Economic

SUDS Deliver benefits in all

three areasof development

Why Sustainable Drainage?

Sustainability is today a major factor within the construction industry, influenced by both planning guidance and legislation. In

most cases, we can see that the key drivers behind this change are the conservation and management of two of our most

precious commodities – energy and water.

It is for this reason that Sustainable Drainage Systems (SUDS) are becoming an essential component of our built environment, as

they add value to all three areas of sustainability.

The effective integration of SUDS into master planning, for both urban as well as residential developments, will enable us to

better manage our water resources.

As a long established manufacturer and supplier to the built environment, Brett recognises its responsibility to develop, promote

and support products, including permeable paving, for use within SUDS design.

These products must be capable of seamless integration into all forms of the hard landscaped environment to enhance water

quality, minimise flood risk and improve the management of our most valuable natural resource - water.

The effective use of SUDS can help to mitigate the impact of the more extreme weather events that we are seeing as a result of

changing climate patterns and of our ever increasing demands on land usage.

BRETT PERMEABLE PAVING

Growing urbanisation has resulted in the increase of impermeable areas - roads, driveways, parking facilities, pedestrianisation

and roof surfaces. This, coupled with higher density patterns of construction, has led to ever-larger areas with very rapid water

run off and a proportionately reduced area where natural, permeable drainage can occur in a controlled manner.

This means that rainfall moves very quickly from impermeable hard surfaces through to watercourse with little reduction in

either volume or speed. In turn, this means that there exists a progressively higher risk of flooding.

Permeable paving has the ability to attenuate the speed and volume of run off, thereby minimising local flood risks and

collectively, mitigating flood risk over larger areas.

The Urbanisation: Run Off Equation

The speed of water run off can vary by up to 90% from an undeveloped rural area through to a heavily urbanised area, as we

can see from the illustrations below. Given increasing urbanisation, the new agricultural techniques and rapid expansion of

cities and transport infrastructure that we have seen over the past century, the risks from faster run off and more pollution are

obvious.

Pollution

Another direct result of the increase in urbanisation is the environmental pollution from hydrocarbons and heavy metals resulting

from vehicle usage and power generation. These come on top of the other water contaminants like dust and faeces that occur

within an urban environment.

Fast and uncontrolled surface water run off carries this pollution with it almost undiluted, directly into our water courses, where

it can be harmful to our wildlife.

Changing Weather Patterns

Climate change is an inevitable factor for us all: in the UK the effects have been seen in warmer, wetter, weather with more

frequent extreme rainfall events. This storm water drains rapidly from the typical urban environment, causing an early peak in

flow rates that can overwhelm older sewers, many of which date back to the Victorian era, and trigger a widespread flooding

event.

This can be contrasted with how SUDS replicate the natural flow of water with a higher base flow, as water is retained in the

system, leading to a reduced and delayed peak flow rate. This serves to greatly reduce the risk of a major flood event as well as

offsetting the effects of climate change and urbanisation.



Surface Water Run-offSustainable Drainage Systems

5%

95%

30%

70%

T234

70%

30%95%

5%

Rural undeveloped Agricultural Suburban High density urban


Using Permeable Paving in Suds ‘Management Train’ Schemes

‘Management train’ or ‘treatment train’ are terms used for an integrated sequence of measures employed in a SUDS scheme

which, taken together, control volumes of run off and reduce pollution before discharge.

These measures are designed to emulate the natural catchment process.

The critical function of any SUDS system is to control surface water run off as near to its point of origin, that is where the rain

falls and/or accumulates, as possible. Termed ‘source control’, this can mitigate the speed of run off, direct and guide it before

finally controlling its passage off or through the surface.

Permeable paving, when used as part of a SUDS management train design, is used to control run off by infiltration and

attenuation, whilst at the same time, introducing various levels of pollution control.



Swale

Run off Impermeable paving

Conventional tiled roof

Permeable paving

Source control

Site control

Green roof

SoilSoil

The illustration above shows how permeable pavementscan be integrated into a SUDS management train. Withits spare hydraulic capacity, permeable pavements areideal as a source control for run off from roofs as well asadjacent impermeable pavements or other impermeablehardstanding areas.



1. Prevention – good site design and effective housekeeping measures

can help minimise run off and pollution levels.

These approaches should generally be included within the site

management plan to ensure that they are implemented.

2. Source control – effective control of run off at or very near its

source, this can be achieved with features such as green roofs,

soakaways, rain gardens and permeable pavements. When rainwater

is harvested on site it can be re-used as a source of non-potable ‘grey’

water thereby reducing the demand for fresh mains water.

Run off to grass

Storage

Evapotranspiration

Infiltration Conveyance

THE FOUR PRINCIPAL STAGES OF A SUDS MANAGEMENT TRAIN

Balancing pond

Regional control

Discharge to stormor main drainage


Evapotranspiration

Conveyance3. Site control – planned management of water in a local area or site –

examples would include routing water from building roofs and car parks to

soakaway or infiltration areas and then to storm tanks or a detention basin

thereby attenuating the flow of water entering the system after a storm event.

4. Regional control – designing a system that can efficiently manage

the run off from a site, or several sites, typically resulting in a

balancing pond or wetland. This provides a natural method of

handling excess water thereby reducing the risk of flooding events.

CODE DESCRIPTION MODEL THICKNESS PLAN SIZE No. AREA (m2) BLOCKS PACK WEIGHT EXC VAT(mm) ± 3mm (mm) ± 2mm PER m2 PER PACK PER PACK (kg) PER m2

BB018860 Autumn Gold OF60 60 215x115mm 50 8.08 404 970 £28.27

BB018861 Burnt Oak OF60 60 215x115mm 50 8.08 404 970 £28.27

BB018862 Brindle OF60 60 215x115mm 50 8.08 404 970 £28.27

BB018863 Charcoal OF60 60 215x115mm 50 8.08 404 970 £28.27

BB018864 Brindle OF80 80 215x115mm 50 6.16 308 1030 £31.51

BB018865 Charcoal OF80 80 215x115mm 50 6.16 308 1030 £31.51



Brindle (BR) Charcoal (CL)

Autumn Gold (AG) Burnt Oak (BO)

OMEGA FLOWBrett Omega Flow is a classic rectangular block

profile and purpose designed nibs to enhance

permeability. This contemporary, clean style will

complement most environments and has been

designed for use in either hand or machine lay

applications.

In addition to Omega Flow, we also offer a wide range of complementary

products, including kerbs, which can further enhance any project using

Omega Flow permeable block paving.

Where planned for use in machine lay applications, Omega Flow comes

pre-palletised in clusters of 48 or 64 blocks for use in standard 45°

herringbone block paving patterns.

Application and Installation

Brett Omega Flow is suitable for a wide range of paving applications. For

further details please refer to BS 7533 Part 3: 2005 and Part 13: 2009.

PLEASE NOTE: This product is specifically designed to be hand or machine

laid in permeable pavement applications with permeable sub-base materials

& techniques.

Colour

As shown. Other colour requirements will be considered on request.

Texture

Smooth surface with a 6 x 4mm chamfered edge.

Manufacture and testing

Brett Interlocking Concrete Blocks are manufactured and tested

in accordance with BS EN 1338: 2003. All Brett production

facilities operate to a BS EN ISO 9001: 2008 registered quality management

system.

Permeability rates

Brett Omega Flow has been independently assessed to have a water

permeability rate of 4,265 mm/h when laid in accordance with our

recommendations.This compares with a typical UK rainfall intensity of

75mm/h.

215115

Strength

Characteristic tensile splitting strength not less than 3.6Mpa when

tested in accordance with BS EN 1338: 2003.

Abrasion resistance

The abrasion resistance is designated as Class 3, when tested in

accordance with BS EN 1338: 2003.

Durability

Brett Concrete Paving Blocks are resistant to weathering, including

freeze-thaw and to the varying traffic requirements described and

specified in BS 7533: 2001 Part 1 and 2.

Packaging

The blocks come void packed as standard to reduce site wastage,

however when required for machine lay applications they come

palletised for ease of use.





CODE DESCRIPTION MODEL THICKNESS PLAN SIZE No. AREA (m2) BLOCKS PACK WEIGHT EXC VAT(mm) ± 3mm (mm) ± 2mm PER m2 PER PACK PER PACK (kg) PER m2

Alpha Flow Small

BB018600 Autumn Gold NLAFS60 60 105 x 140 68 10.32 702 1230 £34.24

BB018601 Brindle NLAFS60 60 105 x 140 68 10.32 702 1230 £34.24

BB018602 Charcoal NLAFS60 60 105 x 140 68 10.32 702 1230 £34.24

Alpha Flow Medium

BB018603 Autumn Gold NLAFM60 60 140 x 140 51 10.35 528 1260 £34.24

BB018604 Brindle NLAFM60 60 140 x 140 51 10.35 528 1260 £34.24

BB018605 Charcoal NLAFM60 60 140 x 140 51 10.35 528 1260 £34.24

Alpha Flow Large

BB018606 Autumn Gold NLAFL60 60 210 x 140 34 10.35 352 1260 £34.24

BB018607 Brindle NLAFL60 60 210 x 140 34 10.35 352 1260 £34.24

BB018608 Charcoal NLAFL60 60 210 x 140 34 10.35 352 1260 £34.24

Brett Alpha Flow is a classic, cobble-style, block paver with three block

sizes which all have tumbled edges and interlocking spacer nibs designed

to enhance permeability. The three unique Alpha Flow block sizes allow

for the creation of a wide range of differing random patterns that will all

interlock. Brett can supply a range of the most popular of these patterns

to make it easy to install on site.

Application and Installation

Brett Alpha Flow is suitable for a wide range of paving applications.

For further details please refer to BS 7533 Part 3: 2005 and

Part 13: 2009.

PLEASE NOTE: This product is specifically designed to be laid in permeable

pavement applications with permeable sub-base materials and techniques.

Colour

As shown. Other colour requirements will be considered on request.

Texture

A rustic, cobble-type paving block with a surface tumbled edge detail.

Manufacture and testing

Brett Interlocking Concrete Blocks are manufactured and tested in

accordance with BS EN 1338: 2003. All Brett production facilities operate

to a BS EN ISO 9001: 2008 registered quality management system.

Permeability rates

Brett Alpha Flow has been independently assessed to have a water

permeability rate of 3,386 mm/h when laid in accordance with our

recommendations.This compares with a typical UK rainfall intensity of

75mm/h.

140140105 140210140

Small Medium Large

ALPHA FLOW

Strength

Characteristic tensile splitting strength not less than 3.6Mpa when

tested in accordance with BS EN 1338: 2003.

Abrasion resistance

The abrasion resistance is designated as Class 3, when tested in

accordance with BS EN 1338: 2003.

Durability

Brett Concrete Paving Blocks are resistant to weathering, including

freeze-thaw and to the varying traffic requirements described and

specified in BS 7533: 2001 Part 1 and 2.

Packaging

The blocks come void packed as standard to reduce site wastage.

Brindle (BR) Charcoal (CL)

Autumn Gold (AG)

INTESIO AQUACELL

Development of sites results in a large proportion of area being covered by impermeable surfaces such as roofs, car parks and

roads. Surface water run-off therefore increases up to 80%. Regulators (Environment Agency, Scottish Environment Protection

Agency and local authorities) are promoting the use of Sustainable Drainage Systems (SuDS) that control run-off to that of a

greenfield site (around 20%).

Wavin Stormwater Management Systems have been developed to provide a method of source control in two ways:

• By providing temporary storage for excess flows and limiting outflow to streams and rivers.

• By providing soakaways to infiltrate stormwater back into the ground.

The modular nature of Wavin Stormwater Management Systems means that they can be tailored to suit the specific

requirements of each site. They can be used to provide temporary storage, attenuation and infiltration capacity for run-off for all

sizes and types of site: from individual houses up to the largest commercial developments.

The systems comprise:

AquaCell Storage/Infiltration System

• Individual polypropylene modules assembled together to form an underground structure, used for

stormwater storage or as a soakaway.

STORMWATERMANAGEMENT SYSTEM


SMALL HOUSING SOAKAWAY

HIGHWAY DRAINAGESOAKAWAY

LARGE SCALESTORAGE TANK

The Wavin AquaCell Stormwater Management System comprises individual infiltration modules assembled together to form an

underground structure which can either be used for stormwater storage or as an alternative to domestic soakaways.

The AquaCell Stormwater Management System is fully BBA (British Board of Agrément) approved, Certificate No. 03/4018, and

can meet with the Technical Requirements of NHBC.

Heavy storms and major cloudbursts are becoming more frequent, resulting in ever increasing volumes of stormwater flowing

into conventional drainage systems and water courses. When the capacities of these systems are exceeded the consequences

can be dramatic and damaging.

Stormwater must be controlled; either by limiting the outflow and providing temporary storage or where the ground conditions

are suitable, providing soakaways for the stormwater to infiltrate back into the surrounding ground.

This has the added benefit of recharging the local groundwater.

Both options can be achieved using the Wavin AquaCell Stormwater Management System.


INTESIO AQUACELL

Surface Water Run-offStormwater Management

INTESIO AQUACELL SYSTEM OVERVIEW

AquaCell SystemThe Wavin AquaCell unit is modular in shape (1.0m x 0.5m x 0.4m), has a

capacity of 190 litres and weighs 9Kg. It is 95% void and has a surface area

that is 43% perforated. Conical columns within the unit ensure high

strength and rigidity. The AquaCell units are clipped together in single layers

and pegged together in multiple layers. Conventional pipework is connected

to the units by means of a number of adaptors.

Control ManholeThis manhole is designed to limit the downstream discharge using an

outflow control and if necessary redirect the excess stormwater via an

overflow control into the AquaCell units.

Geomembrane/Geotextile WrapAn impermeable geomembrane wrap is required for storage solutions and a

permeable geotextile wrap is required for soakaway solutions.

Manifold ConfigurationA junctioned pipework assembly providing a controlled multiple feed of

stormwater into the AquaCell Units. The configuration is tailored to suit the

capacity required upon entry into the AquaCell Unit assembly and upon

discharging to the control manhole.

HOW IT WORKSStormwater exceeding the capacity of the conventional drainage system is

attenuated by the control manhole and channelled into the AquaCell unit

assembly. The internal structure of each unit is designed to bring surging

water under control and hold it in temporary storage. If the wrap that

envelopes the unit assembly is impermeable the water will remain in the unit

assembly until such a time as it can flow back into the control chamber and

discharge through the outflow control. However if the wrap is permeable,

the temporarily stored water may be released into the surrounding ground;

soil conditions permitting. By controlling the stormwater at source and

recharging the local groundwater it not only eases the pressure on

conventional drainage systems but benefits the local environment as well.

KEY BENEFITS• Significantly reduced risk of flooding and its consequences.

• Controlled and reduced volume discharge into existing main sewer

systems and water courses.

• Aerobic purification stimulated within the system improves water quality.

• Sustainable, cost effective management of the water environment.

• Recharging the local groundwater.

STORMWATERMANAGEMENT SYSTEMS



INTESIO AQUACELL PRINCIPLE COMPONENTS

Surface Water Run-offStormwater Management

ITEM CODE MODEL DESCRIPTION EXC VAT

A B4502440 6LB050 AquaCell Unit Light £61.61

B B4502355 6LB100 AquaCell Unit £98.93

C BB008098 6UR141 UltraRib S/S Adaptor (fits into pre-formed socket to connect to 150mm UltraRib) £50.17

D B4502347 6TW141 TwinWall S/S Adaptor (fits into pre-formed socket to connect to 150mm TwinWall) £19.53

E BB007987 6LB102 Shear Connector (used to hold units together vertically) £0.93

F BB007999 6LB105 Clip (used to hold units together horizontally) £1.24

G B4502302 6D099 160mm x 110mm OsmaDrain S/S Reducer (fits into pre-formed socket to connect to 110mm OsmaDrain) £37.61

H B8502281 4D916 160mm OsmaDrain P/E Adaptor (fits into pre-formed sockets as an extension connection piece) £9.51

I BB007998 6LB104 Flange Adaptor (Adaptor to be used at points other than pre-formed socket to connect to 150mm UltraRib) £56.74

J BB008001 6LB600 Silt Trap (Extension Kit also available if required) £532.53

A

B

C

AE F G

H I J

D

IKO GREEN ROOFS

Why have green roof systems?Urban development over the last 50 years has led to the paving over large areas of countryside with cities and supporting

infrastructure. Even the traditional areas of parkland and green spaces within our cities have come under increasing pressure.

High rise development in major cities reduces the natural airflow, adding to dirt and pollution, higher temperatures and lower

humidity levels.

Green roofs improve air quality by attracting particles to the vegetation and soil. Plants also absorb airborne pollutants through

the leaves, removing them from the environment, and during the natural process of photosynthesis, plants convert carbon

dioxide to oxygen, which improves the immediate air quality. In addition, cities and industrial areas are increasingly impervious to

water, reducing permeable ground to absorb rainwater run-off. Hard construction materials (concrete, tarmac roadways, roof

tiles etc.) discharge water very quickly, reducing effective evaporation and loading the drainage systems, which in turn can lead

to flooding. Green roofs retain a very high percentage of rainwater and provide slow, controlled water run-off - thereby

reducing the load and allowing much faster evaporation of accumulated moisture. Replacing land lost to construction by

landscaping the roofs of our buildings can help to redress the balance of nature by significantly improving air quality and

reducing water run-off.

Green roofs can improve the acoustics, thermal properties and aesthetic qualities, while also providing additional space for

recreational and leisure purposes. And they significantly increase the life of the waterproofing membrane, protecting it from UV

degradation and the extremes of climatic conditions.

GREEN ROOFS


Features and benefits

Acoustic performanceImprovements to the acoustic performance when installing a green roof finish can play an importantpart in the overall

soundproofing of the building. Indicative figures for potential sound reduction can be provided on request.

Water retention (reducing storm water run-off)The reduction in storm water run-off is a major benefit. From the results gained by practical trials, the average extensive system

can absorb approximately 50% of the rainwater falling on it, and also significantly delay the passage of the remaining water,

reducing the pressure on drainage facilities and flooding. Intensive systems incorporating sufficient soil depth to support

planting schemes, can retain up to 75% of rainfall. Tests have also indicated that greater soil depths may retain up to 90% of

rainfall.

Thermal transmissionIn addition to the thermal insulation installed as part of the waterproofing system, green roofs can further reduce the energy

consumption of a building by up to 10%. Full thermal analysis can be carried out on the specified build-up.

Green roof features and benefits• Enhances environment

• Improves aesthetic appearance

• Controls storm water run-off into surface water drainage system

• Reduces noise transmission by upgrading acoustic performance

• Improves thermal performance

• Improves ambient air quality

• Increases life expectancy of waterproofing membrane

• Extensive green roofs require little long-term maintenance

• Intensive roof gardens can be accessed for recreational use


IKO GREEN ROOFS

Surface Water Run-offGreen Roofs

IKO GREEN ROOFS

What are the green roofs options?

Extensive green roofsThese are construction using low maintenance

planting, without the need for specific irrigation.

Sedums (succulents) and indigenous herbs and

grasses provide excellent cover and protection to

the waterproofing system. They do not provide

usable space or a surface that can be trafficked, but

add instantly to the aesthetics, improve the local air

quality and help to control rainwater run-off into

surface water drainage systems. In addition, a

correctly designed system upgrades the acoustic

and thermal performance of roof finishes.

Intensive roof gardensThe landscape variations are practically limitless, and

it is feasible to create an environment at roof level

similar to that of any designed garden. An increased

quantity of growing medium, improved drainage

layers and irrigation systems are generally required to

support the greater diversity of planting. Shrubs and

trees can easily be accommodated, and there is little

to restrict scope for design other than the overall

weight of the system and the cost of its supporting

construction.

Biodiversity roofsThese are another form of extensive green roof

(i.e. low maintenance) that make use of recycled

materials (e.g. crushed brick, crushed concrete

etc.) in the growing medium. This type of green

roof is intended to create a natural wasteland and

can be seeded initially with selected species to

createsome growth. However the basic design is to

attract fauna and flora of all kinds. As the growing

medium is not of high nutritional value, larger

plants are not likely to survive and will die off

creating further suitable habitat for invertebrates

which in turn will attract other fauna.

GREEN ROOFS


Product List

IKO Anti-Root Cap SheetHigh performance slate surfaced cap sheet consisting of a 180

g/m2 polyester base, coated with polymer modified bitumen,

containing a specially formulated root resistant treatment, for

use as a finl layer in a roof garden waterproofing specification.

It has a slate finish on the upper surface, and a thermofusible

film on the underside. The IKO Anti-Root cap sheet achieves

FLL 4 year root penetration.

Plasfeed Drainage BoardsCE marked drainage composite boards consisting of a dimpled

perforated sheet of high impact polystyrene with a non-woven

filter fabric bonded to each dimple. The drainage composite is

provided with a pressure dividing moisture diffusion open filter

fabric on the back. The system comprises the filter layer, the

drainage layer, the separation layer and the protection layer all

as one integrated unit. These boards are also suitable for use

on inverted roofs.

Plasfeed Water Reservoir PanelWater absorbing mineral wool panels for use as an additional

water reservoir within the build-up of a green roof.

Thickness Dimensions Area per(mm) (m) roll (m2)Plasfeed 5+1 Drainage Layer 25 20 x 1.25 25Plasfeed Water Reservoir Panel 50 1 x 0.6 3

IKO Drainage and Edge Retention TrimsL-shaped metal edging profiles that retain the extensive

landscaping system at roof edges and at intermediate

positions on the roof, whilst allowing full drainage to the

external rainwater systems.

IKO Vegetation Layers and Growing MediumsIKO Sedum Blankets are UK grown and contain 16 varieties

of sedums. They are already grown onto a root

retention/substrate layer. IKO also offers a range of plug plants

specially grown in line with FLL Directive, featuring sedum,

herbaceous plants and grasses.

IKO Wildflower Turf is ideal for creating a truly natural

landscape, providing a food source for birds and a favourable

habitat for butterflies and other insects. The plants in flower

will vary through the spring and summer and the emergence

of flowers and the type of plants that flower will vary from

year to year according to temperature, moisture and available

nutrients.

IKO’s Growing Mediums are specially formulated mixtures.

The formulation carefully balances the requirements of plant

sustenance, water retention and ensures propagation of the

selected plants.

IKO Filter FleeceA 110g/m2 polyester filter layer, preventing the flow of fine

particles to penetrate the drainage system.

Waterproofing optionsIKO manufactures and supplies a wide range of high

performance waterproofing options suitable for use with

green roofs. Key systems include:

• High Performance Bituminous Roofing Systems

(cap sheet achieves FLL 4 year Root Penetration Test)

• Hot Melt Monolithic Systems

• Mastic Asphalt Systems

• Polymeric Single Ply Systems


IKO GREEN ROOFS

Surface Water Run-offGreen Roofs


WASTE NOTSafe and sustainable waste removal

Whether you’re renovating existing

stock or building from the ground up,

it’s inevitable that you will create waste

that needs to be carefully disposed of.

Dealing with waste responsibly in this

industry has long been requested by law,

but increasingly, taking the time to recycle

packaging and waste where possible is

considered to be best practice. Waste

accounts for 6% of the Code for

Sustainable Homes, and knowing how

best to deal with your own can be a

great help towards getting the level

rating you need.

Not only do you need to look after your

own waste, but you can help your

customers look after theirs too. We

supply a range of bin stores, compost

sites and waste disposers for homes,

making it easier for them to dispose of

their waste in a more sustainable way.

Waste


Assessment Criteria

Waste Bins

Compost Bins & Planters

196-197

198-199

200-201

What you need to know about Wasteelectrical and electronic equipment (WEEE)

The WEEE Directive aims to reduce the amount of

electrical and electronic equipment being produced

and to encourage everyone to reuse, recycle and

recover it. This affects our industry when disposing of

old electrical items from an existing home and also

when buying new electrical equipment

for a development. For more information

on WEEE.

Contents

Waste Bins

Compost Bins

Planters


Was 1 Storage of Non-recyclable Wasteand Recyclable House Waste

4 Yes

INCREASEYOUR CREDITSBY REDUCINGYOUR WASTE

How installing recycling facilities canincrease the Code rating

By recognising and providing adequate internal and external storage space for recyclablehousehold waste, you can increase your code rating by 4 credits. With landfill sites fillingup it is increasingly obvious that non-biodegradable goods simply have to be recycled.

This is no longer just a ‘green’ issue for the environmentally minded… this is a verypractical issue for everybody. Plastic and glass has nowhere else to go and is easilyrecycled. Considering this when planning your development and including smart storagesolutions for recycling will give you extra credits and help tackle the issue of landfill, awise move in every respect.

Waste


The first issue of household waste storagesets a mandatory performance requirementwith no available credits. None the less, this

requirement must still be met if a Coderating is to be achieved. As always, care

should be taken to make sure that facilitiesare accessible to disabled people.

Assessment criteria:Waste

Credits MandatoryLevels

Criteria

Storage of household waste

An adequate external space should be allocated for waste storage and sized to accommodate containers according to the largest of the followingtwo volumes:

• The minimum volume recommended by British Standard 5906 (British Standards Institution, 2005) based on a maximum collection frequency ofonce per week. This volume is 100 litres for a single bedroom dwelling, with a further 70 litres for each additional bedroom.

• The total volume of the external waste containers provided by the Local Authority.

Storage space must provide inclusive access and usability (Checklist IDP). Containers must not be stacked.

Storage of recyclable household waste

Dedicated internal storage for recyclable household waste can be credited where there is no (or insufficient) dedicated external storage capacity forrecyclable material, no Local Authority collection scheme and where the following criteria are met:

At least three internal storage bins:

• all located in an adequate internal space

• with a minimum total capacity of 60 litres.

Storage of recyclable household waste

A combination of internal storage capacity provided in an adequate internal space, with either:

• a Local Authority collection scheme, or

• no Local Authority collection scheme but adequate external storage capacity.

Local Authority collection scheme

In addition to a Local Authority collection scheme (with a collection frequency of at least fortnightly), at least one of the following requirements mustbe met:

• Recyclable household waste is sorted after collection and a single bin of at least 30 litres is provided in an adequate internal space.

• Materials are sorted before collection and at least three separate bins are provided with a total capacity of 30 litres. Each bin must have a capacityof at least 7 litres and be located in an adequate internal space.

• An automated waste collection system which collects at least three different types of recyclable waste.

No Local Authority collection scheme but adequate external storage capacity

For houses and flats there must be at least three identifiably different internal storage bins for recyclable waste located in an adequate internal space:

• with a minimum total capacity of 30 litres

• with a minimum individual capacity of at least 7 litres.

AND

For houses, an adequate external space must be provided for storing at least three external bins for recyclable waste:

• with a minimum total capacity of 180 litres

• with a minimum individual capacity of 40 litres.

For flats, a private recycling scheme operator must be appointed to maintain bins and collect recyclable waste regularly. Recycling containers must:

• be located in an adequate external space

• be sized according to the frequency of collection, based on guidance from the recycling scheme operator

• store at least three types of recyclable waste in identifiably different bins.

2

None All Levels

4

WASTE BINS


P6706688 0051590 Addis Roll Top Waste Bin 48 Litre Metalic £14.99

P6708456 0052614 Addis Roll Top Waste Bin 48 Litre Linen £14.99

BI001362 336041 Brabantia Twin Compartment Touch Bin 10/23 Litre Brilliant Steel £94.99

BI001363 336065 Brabantia Twin Compartment Touch Bin 10/23 Litre Matt Steel £99.99

BI001364 378720 Brabantia Twin Compartment Touch Bin 10/23 Litre Matt Steel £104.99

BI001365 401060 Brabantia Twin Compartment Touch Bin 20 Litre Brilliant Steel £90.99

BI001366 401084 Brabantia Twin Compartment Touch Bin 20 Litre Matt Steel £102.99

BI001367 401107 Brabantia Twin Compartment Pedal Bin 20 Litre Brilliant Steel £80.99

BI001368 401121 Brabantia Twin Compartment Pedal Bin 20 Litre Matt Steel £74.99

I6909404 338229 Brabantia Touch Bin 30 Litre Brilliant Steel £64.99

I6907429 336447 Brabantia Touch Bin 50 Litre Brilliant Steel £89.99

I6909452 336560 Brabantia Touch Bin 50 Litre Matt Steel £90.99

I6907573 124907 Brabantia Pedal Bin 12 Litre Brilliant Steel £29.49

I6909407 146749 Brabantia Pedal Bin With Food Trap 20 Litre Brilliant Steel £42.99

BK000823 SOBINC Bristan Solo Waste Bin, Chrome Plated £33.33

BK000837 SOWASTEC Bristan Solo Waste Bin, Chrome Plated £40.00

ADDIS ROLL TOP WASTE BIN

METALLIC

ADDIS ROLL TOP WASTE BIN

LINENBRISTAN SOLO WASTE BIN

BRABANTIA TWIN

COMPARTMENT TOUCH BIN

MATT STEEL

WASTE BINS


Waste


Waste Bins

WASTE BINS


I6908907 1280740 Curver Plastic Dustbin c/w Clip on Lid, Black, 80Ltr £15.99

BKA03727 FFWB12 Franke Flush Fit Waste Bin 12 Litre, Green £182.00

BKA02012 FIWB Franke Waste Bin (inset or flush), Stainless Steel £173.34

BKA03726 FIWB12 Franke Inset Waste Bin 12 Litre, Green £182.00

K5500125 502.43.706 Hafele Solo Waste Bin With Runner 20L CR-White £67.24

BKU12714 502.73.921 Hafele Euro-Cargo 45 Pull Out Waste Bin, 70 litre, for 450mm wide cabinet £166.08


BKU12717 502.73.940 Hafele Euro-Cargo S Pull Out Waste Bin, 30 litre, for 300mm wide cabinet £147.83


K9801377 ECOBIN3 Milano Ecobin 300mm Tandem £104.17

K9801378 ECOBIN4 Milano Ecobin 400mm Triple £120.83

I6908073 2401L Schaefer Wheelie Bin, Green, 240Ltr £54.00

HAFELE EURO-CARGO PULL OUT WASTE BINCURVER PLASTIC DUSTBIN SCHAEFER WHEELIE BIN

FOREST COMPOST BINS


BB013698 CPT120 Forest Composter 61 x 99 x 99cm £39.99

B2400871 FCB01 Forest Compost Bin £72.19

BB013675 FCB01HD Forest Compost Bin With Plastic Cover 94 x 94 x 89cm £82.54

BB019846 FSSCEXT Forest Compost Bin Extension Kit 82 x 106 x 106cm £51.07

BB013674 FSSCV2HD Forest Slot Down Composter 120 x 106 x 106cm £83.33

BB019855 SBHC Forest Beehive Compost Bin 86 x 74 x 74cm £81.25

BB013699 SBHCHD Forest Beehive Composter 106 x 64 x 64cm £85.83

COMPOSTOR COMPOST BIN EXTENSION KIT

BEEHIVE COMPOST BINSLOT DOWN COMPOST BIN

COMPOST BIN WITHPLASTIC COVER

COMPOST BINS &PLANTERS


VENICE PLANTER CALEDONIAN


BB013656 FPVAHD Forest Venice Planter 150 x 180 x 50cm 170.83

BB013657 FPTLAHD Forest Toulouse Planter 130 x 100 x 40cm 74.99

BB013658 FRB4501800HD Forest Caledonian Planter 180 x 45cm 87.49

BB013659 FRB90V2HD Forest Caledonian Planter 45 x 90 x 90cm 91.66

BB013663 FLPSHD Forest Ludlow Planter Small 41 x 46 x 46cm 62.49

BB013664 FLPLHD Forest Ludlow Planter Large 44 x 60 x 60cm 74.99

BB013667 BPK5050HD Forest Bamburgh Planter Kit 50 x 50 x 50cm 49.99



BB019832 BHP Forest Bamburgh Herb Planter 33 x 150 x 50cm 63.80

BB019838 EHP Forest Slotted Herb Planter 14 x 120 x 50cm 8.55

Waste


Compost Bins & Planters

FOREST PLANTERS

LUDLOW PLANTER BAMBURGH PLANTER BAMBURGH HERB PLANTER

BREBuilding Research Establishment

BREEAM Building Research Establishment Environmental Assessment

Method. A suite of environmental assessment rating tools

designed, operated and owned by BRE, first launched in 1990.

Carbon dioxideAn invisible odorless gas which is the by product of energy

generated from fossil fuels including gas, oil and coal. It is a

significant contributor to global warming and climate change.

Communities and Local GovernmentUK Government Department responsible for Communities and

Local Government; owners of the CSH.

Code See Code for Sustainable Homes

Code for Sustainable HomesGovernment owned environmental assessment method for

certifying and rating new homes in England. It was launched

in April 2007.

CSH Code for Sustainable Homes

(see Code for Sustainable Homes)

EcoHomes BREEAM Version for new homes, first launched in 2000 and

now replaced in England for new dwellings by the Code.

EcoHomes remains in operation for refurbished homes in the

UK, and all dwellings in Scotland.

EPCThe Energy Performance Certificate records a home’s energy

and CO2emission performance rating which is calculated using

SAP for dwellings. Energy Performance Certificates display the

energy efficiency of a home on a scale of A-G. The most

efficient homes – which should have the lowest fuel bills –

are in band A. The Certificate also shows, on a scale of A-G,

the environmental impact of the home.

Further information available from

www.homeinformationpacks.gov.uk.

FLOW RESTRICTORAn accessory or included fitting which provides a fixed amount

of obstruction in a water supply. This has the effect of causing

less water to flow from it than would otherwise flow from a

fully open outlet.

FLOW REGULATORAn accessory or included fitting which only provides an

obstruction in a water supply, but also has a limited ability to

compensate for changing pressures within that supply helping

to provide a consistent reduction in flow to particular valve

(e.g. 6 litres/ minute)

EST The Energy Savings Trust was established by the UK

government in 1993 following the Earth Summit in Rio de

Janeiro. EST provides independent evidence-based policy

analysis on energy efficiency, small-scale renewable

technologies such as Solar PV, Small Scale Wind and Ground

Source Heat Pumps and clean, low carbon transport, covering

both the UK and Europe.

Further information

available from www.energysavingstrust.org.uk

THERMOSTATICAny shower, tap or bath mixer described as thermostatic has

hot and cold water supplying it and has the means of keeping

its water temperature stable once set without manual

adjustment. To a greater or lesser extent the valve will also

have the ability to gradually stop all water flowing out of the

product when either the hot or cold supply is turned off.

MINIMUM OPERATING PRESSUREDenotes the amount of pressure required to get water coming

out of the fitting. This does not take account of any particular

flow rate (which normally very low in systems operating close

to this threshold) it is simply the minimum pressure required to

have the fitting physically operating.

TMV3 SCHEMEGenerally accompanied by a logo, this denotes that the fitting

is suitable for use in a healthcare environment. The TMV3 logo

can only be displayed as a result of independent testing by

water industry experts.

TMV2 SCHEMEGenerally accompanied by a logo, this denotes that the fitting

is suitable for use in general domestic environments. The

TMV2 Logo can only be displayed as a result of independent

testing by water industry experts.

WRAS APPROVALWater Regulations Advisory Scheme Approval denotes that a

product has been independently tested and found to be

compliant with the Water Supply (Water Fittings) Regulations

and the Scottish Byelaws.

Generic Definitions


AC Alternating CurrentACoP Approved Code of PracticeAD L1A Approved Document L1AADE Approved Document E

BRE Building Research EstablishmentBREEAM Building Research Establishment Environment

Assessment MethodBS British StandardBSRIA Building Services Research and Information

Association

CCS Considerate Constructors SchemeCFL Compact Fluorescent LampCH4 MethaneCHP Combined Heat and PowerCIBSE Chartered Institution of Building Services

EngineersCO2 Carbon DioxideCoC Chain of CustodyCode Code for Sustainable HomesCPET Central Point of Expertise on TimberCSA Canadian Standards AssociationCSH Code for Sustainable Homes

DC Direct CurrentDECC Department for Energy & Climate Change DEFRA Department of Environment, Food and

Rural AffairsDER Dwelling Emission RateDF Average Daylight FactorDS Design Stage

EMAS Eco Management and Audit SchemeEMS Environmental Management SystemEN European NormalizationEPC Energy Performance Certifi cateEPDM Ethylene propylene Diene MonomerEPIs Environmental Performance IndicatorsESCO Energy Services CompanyEST Energy Savings Trust

FRA Flood Risk AssessmentFSC Forest Stewardship Council

GLS General Lighting ServicesGRP Glass Reinforced PlasticGSHP Ground Source Heat PumpsGWP Global Warming Potential

HFCs HydrofluorocarbonsHLP Heat Loss Parameter

ICoP Interim Code of PracticeISO International Organization of Standardisation

LCA Life Cycle AssessmentLED Light Emitting DiodeLZC Low or Zero Carbon

MCS Microgeneration Certifi cation SchemeMDF Medium Density FibreboardMTCC The Malaysian Timber Certification CouncilMVHR Mechanical Ventilation with Heat Recovery

NAFRA National Flood Risk AssessmentNIFA Net Internal Floor AreaNOx Nitrogen Oxides

O2 OxygenOSB Oriented Strand Board

PCS Post Construction StagePEFC Programme of Endorsement of Forest

Certification SchemesPFCs PerfluorocarbonsPIR Passive Infra Red (Movement Detecting

Devices)PU PolyurethanePV PhotovoltaicPVC Poly Vinyl Chloride

QA Quality Assurance

RDL Robust Details LimitedRIBA Royal Institute of British Architects

SAP Standard Assessment ProcedureSBD Secured by DesignSF6 Sulphur HexafluorideSFI Sustainable Forestry InitiativeSON or HPS High Pressure Sodium LampSUDS Sustainable Drainage systemsSWMP Site Waste Management Plan

TER Target Emission RateTFL Tubular Fluorescent Lamp

VOC Volatile Organic Compound

Acronyms

NOTES


NOTES


AGATel: 0845 7125 207www.aga-web.co.uk

AQUALISATel: 0845 7125 207www.aqualisa.co.uk

BRETTTel: 0845 6080577www.aqualisa.co.uk

CALOREXTel: 01621 856611www.calorex.com

CMETel: 0844 4122029www.ecoplay-systems.com

DIMPLEXTel: 0845 600 5111 www.dimplex.co.uk

DULUXTel: 08444 817 817www.dulux.co.uk

ECOLIBRIUMTel: 0191 410 6611www.tor-coatings.com

ECOTHERMTel: 01702 52 01 66www.ecotherm.co.uk

ECOTUBESTel: 01323 648 641 www.ecotube-kit.com

INTAECO LTDTel 01889 272 190 www.intaeco.co.uk

IKOTel: 0844 873 1062www.ikoroofing.co.uk

GAHTel: 01394 421 160www.gah.co.uk/heating

GRANTTel: 01380 736 920www.grantuk.com

HALSTED RAINTel: 07900 427 450www.halstedrain.com

HANSON - THERMALITETel: 08705 626 500www.hanson.com/uk/boards

HEATRAE SADIATel: 01603 420 100www.heatraesadia.com

IDEAL STANDARDTel: 01482 346 461www.ideal-standard.co.uk

JELD-WENTel: 0845 122 2890www.jeld-wen.co.uk

JG SPEEDFITTel: 01895 449 233www.speedfit.co.uk

KINGSPANWATERTel: 01296 633 000www.kingspanwater.com

LECICOTel: 01234 244 030www.lecico.co.uk

NEW BUILD FRAMESTel: 01842 820 316www.newbuildframes.co.uk

POLYPIPETel: 01709 770 000www.polypipe.com

RENEWABLE TECHNOLOGIESTel: 01603 716 436www.renewabletech.co.uk

RM SOLARTel: 01924 224 282www.rmsolar.com

ROCATel: 01530 830 080www.uk.roca.com

SANTONTel: 01603 420 100www.santon.co.uk

THERMOBOARDTel: 01392 444 122www.thermowood.co.uk

TISUNTel: +43 5333201www.tisun.com

TITANTel: 028 3836 4400www.titanenv.com

UPONOR01455 551 306www.uponor.co.uk

VELUX01592 778 225www.velux.co.uk

WAVIN0844 856 5152www.wavin.co.uk

WOODPECKERTel: 0845 838 6359www.woodpeckerenergy.com

WPLTel: 02392 242 600www.wpl.co.uk

Suppliers Contact Numbers & Website

BUILDING RESEARCH ESTABLISHMENTBucknalls LaneWatfordWD25 9XXTel: 01923 664000www.bre.co.uk

DEPARTMENT OF ENERGY & CLIMATE CHANGE3 Whitehall PlaceLondonSW1A 2AW Tel: 0300 060 4000 (standard national rate)www.decc.gov.uk

ENERGY SAVING TRUST21 Dartmouth StLondonSW1H 9BPTel: 0845 120 7799Fax: 0845 120 7789www.energysavingtrust.org.uk

HEAT PUMP ASSOCIATION2 Waltham CourtMilley Lane Hare HatchReading BerksRG10 9THTel: 0118 940 3416www.feta.co.uk/hpa

HEATING & HOTWATER INFORMATION COUNCIL36 Holy WalkLeamington SpaWarks CV32 4LYTel: 0845 600 2200Fax: 01926 423 284www.centralheating.co.uk

OFGEM9 MillbankLondon SW1P 3GETel: 020 7901 7000Fax: 020 7901 7066Em: [email protected]

RENEWABLE ENERGY ASSOCIATIONCapital Tower, 91 Waterloo Road,London SE1 8RTTel: 020 7925 3570www.r-e-a.net

SOLAR TRADE ASSOCIATION The National Energy CentreDavy AvenueKnowlhillMilton Keynes MK5 8NGTel: 01908 442290www.solar-trade.org.uk

SOLIFTECWhite HouseAll SaintsSouth ElmhamSuffolk IP19 0PATel: 0845 601 4406www.soliftec.com

THE CARBON TRUST LTD6th Floor5 New Street SquareLondon EC4A 3BFTel: 0800 085 2005 www.carbontrust.co.uk

UHMAUnderfloor Heating Manufacturers AssociationUHMA PR Office: Belhaven House67 Walton Road EastMolesey, Surrey KT8 0DPTel: 020 8941 7080www.uhma.org.uk

WRASWater Regulations Advisory SchemeFern ClosePen-Y-Fan Ind EstOakdale, NewportGwent, NP11 3EHTel: 01495 248454Fax: 01495 249234www.wras.co.uk

WRC plcResearch and consultancy in water, waste and the environmentFrankland RoadBlagrove SwindonWiltshire SN5 8YFTel: 01793 865000Fax: 01793 865001www.wrcplc.co.uk

Governing Bodies

22 Branches Across East Anglia

BURY ST. EDMUNDS01284 731500Beetons WayBury St. EdmundsSuffolk IP32 6TP

CAMBRIDGE North01223 466000Nuffield RoadTrinity Hall Ind. EstCambridge Cambridgeshire CB4 1TS

CAMBRIDGE South01223 466000Cromwell RoadCambridgeCambridgeshire CB1 3YB

COLCHESTER01206 548001Peartree RoadStanwayColchesterEssex CO3 OJW

DISS01379 641414Victoria RoadDiss NorfolkIP22 4HW

HALESWORTH01986 875000Broadway DriveHalesworthSuffolkIP19 8QR

IPSWICH01473 24120039 Knightsdale RoadIpswichSuffolk IP1 4JJ

KELVEDON01376 570700London RoadFeeringKelvedonEssex CO5 9EA

LOWESTOFT01502 517126Cooke RoadSouth Lowestoft Ind. Est.LowestoftSuffolk NR33 7NA

MARCH01354 662000Martin AvenueMarch Trading ParkMarch CambridgeshirePE15 0BW

MARTLESHAM HEATH01473 63390032 Gloster Road Martlesham Heath Bus. ParkMartlesham HeathSuffolk IP5 3RD

NEWMARKET01638 666900Unit 3 Newmarket Business ParkStudlands Park AvenueNewmarket Suffolk CB8 7ER

THE LOCAL CHOICE FOR 100 YEARS

There’s a RIDGEON branch nearyou...so call in today.

NORWICH North01603 408400186a Reepham RoadHellesdonNorwichNorfolk NR6 5SN

NORWICH South01603 697030Unit 52 White Lodge Ind. Est.Hall RoadNorwichNorfolk NR4 6DG

PAMPISFORD01223 497900Solopark Station RoadNr. PampisfordCambridgeshire CB22 3HB

PETERBOROUGH01733 2078206 Whitehead DroveFengatePeterboroughCambridgeshire PE1 5BF

ROCKLANDS01953 482000Attleborough RoadRocklandsNr AttleboroughNorfolk NR17 1UF

SAFFRON WALDEN01799 583000Ashdon Road Commercial CentreSaffron WaldenEssex CB10 2NQ

SAWBRIDGEWORTH01279 600600West RoadSawbridgeworthHertfordshireCM21 0BP

SNETTISHAM01485 544300School RoadSnettishamNorfolk PE31 7XE

SUDBURY01787 881777Off Windham RoadChilton Ind. Est.SudburySuffolk CO10 2XH

THETFORD01842 760400Burrell WayStephenson Ind. EstThetfordNorfolk IP24 3RW

OpenMonday to Friday7.30am - 5pm Saturday 8am - 12noonCromwell Road Cambridge &Martlesham Heath Saturday 8am - 4pmClosed bank holidays

Building Materials

Timber & Panel Products

Hand Tools

Power Tools

Ironmongery

Electrical

Paint & Decoratives

Bathrooms

Kitchens

Heating & Plumbing

Tiling & Flooring

Kitchen & Bathroom Planning

Hire - Rental & Sales

Aga

www.ridgeons.co.uk

sustain

able p

roducts

Date post:	03-Mar-2015
Category:	Documents
Upload:	paponseiro
View:	404 times
Download:	0 times

Green Light Cat 2011

Documents