+ All Categories
Home > Documents > Green Screen Chroma Key Backdrops Assembly Guide€¦ · Green Screen Chroma Key Backdrops Assembly...

Green Screen Chroma Key Backdrops Assembly Guide€¦ · Green Screen Chroma Key Backdrops Assembly...

Date post: 07-Aug-2020
Category:
Upload: others
View: 7 times
Download: 0 times
Share this document with a friend
1
Green Screen Chroma Key Backdrops Assembly Guide 1200mm W x 2000mm H Step 2: Find the leg piece with the screw. Attach this leg piece to the base by removing the screw, positioning it to the allocated hole in the base and tightening it back up with the allen key provided. Step 3: Once one leg is assembled, find the horizontal pole that connects the two legs. Note: Each pole end should attach to its corresponding number. Attach this pole as shown ensuring the button is securely locked into the hole. Attach the second leg to the pole and base. Step 1: Unpack the pieces and remove all the protective wrapping. Step 4: Working your way up the frame, find the next pole by matching the numbers and attaching them accordingly. Note: Add the horizontal bar into the allocated holes before the frame is finished, allowing you to push it into place easily. Step 5: Your frame is now assembled. Carefully place the fabric over the frame whilst smoothing any creases as you go. Step 6: Ensure that the fabric is pulled down tight on the frame to create tension. Connect and close the zipper along the bottom of the fabric. You should now have a great looking Green Screen Chroma Key Backdrop!
Transcript
Page 1: Green Screen Chroma Key Backdrops Assembly Guide€¦ · Green Screen Chroma Key Backdrops Assembly Guide 1200mm W x 2000mm H Step 2: Find the leg piece with the screw. Attach this

Green Screen Chroma Key Backdrops Assembly Guide1200mm W x 2000mm H

Step 2: Find the leg piece with the screw. Attach this legpiece to the base by removing the screw, positioning it tothe allocated hole in the base and tightening it back upwith the allen key provided.

Step 3: Once one leg is assembled, find the horizontalpole that connects the two legs. Note: Each pole end should attach to its corresponding number. Attach thispole as shown ensuring the button is securely lockedinto the hole. Attach the second leg to the pole and base.

Step 1: Unpack the pieces and remove all theprotective wrapping.

Step 4: Working your way up the frame, find the nextpole by matching the numbers and attaching themaccordingly. Note: Add the horizontal bar into theallocated holes before the frame is finished,allowing you to push it into place easily.

Step 5: Your frame is now assembled. Carefully placethe fabric over the frame whilst smoothing any creases as you go.

Step 6: Ensure that the fabric is pulled down tight on theframe to create tension. Connect and close the zipperalong the bottom of the fabric. You should now havea great looking Green Screen Chroma Key Backdrop!

Recommended