1
Glenview, Illinois | USA | www.signode.com ©2015 SIGNODE SPD 1819 REV. 05-06-2015 Lightweight design and ergonomic handle reduces operator fatigue Effortlessly cuts through up to two pieces of 1-1/4" (32 mm) strap World's only battery powered cutter for steel or plastic strapping GripPack Cutter Signode’s lightweight, battery operated GripPack strap cutter enhances productivity and operator safety for applications that utilize steel or plastic strapping. Unlike manual tools where operator effort is required, the GripPack cutter quickly and effortlessly cuts through up to 2 pieces of 1-1/4" x .050" (32 mm x 1.4 mm) steel or plastic strapping. It offers two modes of operation - one for non-tensioned strap to maximize cutting speed and one for tensioned strap to help enhance operator safety. In the tensioned strap mode, the GripPack cutter holds the tensioned strap in place during cutting and keeps one end of the strap in its serrated jaws after cutting. The result is one-handed operation that allows operators to safely position themselves away from the single rebounding strap end. Use the QR code to learn more about our entire line of GripPack battery powered tools. www.signode.com/grippack Non-tensioned and tensioned strap modes LED light illuminates cutting area Up to 240 cuts per charge Specifications Strapping: Steel or plastic strapping Strapping size: Up to 1-1/4" x .050" (32 mm x 1.4 mm) steel or plastic strapping Cut rate: 240 cuts per charge Weight: 7.5 lbs. (3.4 kg) Part Numbers Cutter only: 800770 GripPack Kit (Includes cutter, battery and charger) 110 volt: 800976 220 volt: 800977
