Groundstates of liquid crystals with colloids: a

project for undergraduate students.

Joan Adler1, Priel Aharonian1, Oshri Halimi1,1 Physics Department, Technion, Haifa, Israel, 32000

E-mail: phr76ja@technion.ac.il

Abstract. Although simulated annealing has become a useful tool for optimization ofmany systems, its initial raison d’etre of achieving the groundstate structure for a spinor atomic/molecular condensed system remains important. Such modelling, whether usinganalog models such as glass beads or by invoking simple computer models can be suited toundergraduate projects. In this paper we discuss the application of simulated annealing to findthe groundstate of a system of liquid crystals (LC) with suspended colloids. These systems areexpected to have interesting conductive behaviour, relevant to applications for television andcomputer screens. In our first stage, a pure LC system was simulated in python and vizualizedby undergraduates and presented on an educational website. In the next stage colloid(s) wereadded, and the original code modified accordingly. Interesting effects such as ordering aroundthe colloid have been seen and will be described. In the final stage and in order to study largersamples, the code was rewritten in C++ and several algorithmic modifications were made.Speed up factors between 100 and more than 1000 were obtained, and fascinating closed cellssurrounding the colloids were observed.

1. IntroductionThis report is part of the Technion Computational Physics Group’s presentation of educationalwebsites with downloadable code on many diverse topics, with special emphasis on CondensedMatter/Statistical Physics topics and model visualization. Earlier presentations [1, 2, 3] covera wide range of topics. Each project includes physical background, downloadable code andinstructions for implementation, and is designed to introduce a topic at a level suitable for othersenior undergraduates.

2. Simulated annealing for groundstate searchHow do crystals reach their groundstates in nature? The groundstate is the state with the lowestenergy, there could be several equivalent ones, or a situation of almost minimum energy whichencompasses several domains. Let us consider the example of diamonds, which are naturallyformed from molten carbon in high temperature and pressure conditions in volcanoes as theyslowly cool or anneal. Rapid cooling or quenching would lead to many small crystal domains.An animated demonstration simulated annealing computer code, using a simple two-dimensionalLennard-Jones (LJ) interaction, between two atoms i and j, a distance rij apart, where σ is theseparation of the particles when the potential is zero and ε is the depth of the potential at its

minimum,

VLJ = 4ε

[(σ

rij

)12

−(σ

rij

)6](1)

was presented in [4] to illustrate this. A variation for the same model using a master-slavegenetic algorithm was given in [5]. Analog demonstrations [6, 7] can be used to demonstrate theannealing process, a full discussion is given in [6] and examples for defects and grainboundariesin [7]. In earlier days one had to use a photocopier to take the images, today a smartphonecan be used and so for the present project larger boxes (from empty CD disks Fig. 1) in Figs.1 were photographed “as is” (Fig. 2), equivalent to a simulated quench then shook to imitatemovement as kinetic energy, a simulated anneal and photographed again (Fig. 3).

All of these cases, computer and analog, were easy because with spherical particles thedomains dissolve with little effort, however once the particles become elongated groundstatesearch becomes far more difficult. We can take the intuition from the sperical analog systemsto the computer to begin our simulations, but we may need additional stages.

Figure 1. The box. Figure 2. Disorder. Figure 3. Groundstate.

3. Experimental motivationThe present series of studies began when the Technion RBNI Nanotechnology Institute had avisit by Professor Shunsuke Kobayashi from Japan, who spoke about how colloids could changethe properties of liquid crystals. In discussions following his talk, we decided to begin projectsto prepare educational material with downloadable code to encorage modelling these systems.

4. Visualization and potentials for liquid crystals with or without colloidsLiquid crystal groundstates have long range order in at least one direction, and the molecularobjects usually are non-spherical molecules. The Technion Computational Physics/SimPhoNyvizualization software, AViz, [8, 9, 10] had a LC option, (proposed by Mike Allen, quite awhile ago) that had been used for quadrupole simulations of elongated molecules but never forliquid crystals. (A quadrupole Pa3 ordered state simulated by O. Cohen [11], shown in Fig.4.) The molecules are shown as cylinders. Within AViz there is the possibility to use color toreinforce the perception of spin direction, and it works equally well on cylinders. As opposedto atoms, that only have a type and location, spins have type, location and a direction withx, y and z components, and can be drawn as pins or cones. The LC option has a locationand direction and can have additional properties such as angular deviation from some selecteddirection, or movement of center from initial location. They can be drawn as lines or cylindersof varying lengths and thicknesses. At this point in time, AViz enables only one type of object(atom/spin/liquid crystal) so the introduction of colloids required a workaround. The colloidsare indicated by stars of cylinders joined at the center, which has the added visual advantage

over a larger blob of being able to view order thru their branches. A cartoon graph of energyversus phasespace for a simple two dimensional LC system surrounding a colloid is shown inFig. 5.

Figure 4. Quadrupolar order withAViz [11].

Figure 5. Cartoon of energy vs. phase space.

A LC potential [12] that has the same general functional form as the LJ was developed byGay and Berne [GB], for this anisotropic case. Each of parameters σ, rij and ε are generalizedsince there are now orientational degrees of freedom as well as the translational ones and shapeanisotropy. There is a wonderful website and educational project about generalised LJ/GBpotentials developed by the Concord Consortium [13], which discusses potentials beyond theusual LJ/GB as well as mixed systems. This site is molecular dynamics oriented to studydynamic behaviour rather than groundstate search that is our main concern, but the potentialsare, of course, identical. We refer the reader to their excellent exposition for detailed information.In brief, a unit vector, ui, a length li, breadth di and an electric dipole moment pi are addedfor each molecule, as well as χ and α which are functions of the length/breadth ratios. Theparameters are now functions of these, with details in [13, 14, 15]. In addition there areparameters that can be chosen to include the possible dependence of the well depth and end toend versus side by side values.

5. Groundstates of liquid crystalsThe project to present educational sites for liquid crystal groundstate search was begun by HilaGlanz and Izrael Nadir with a python code for the GB potential (including generalization forother potentials) and an interesting webinterface for presenting results as shown in Figs 6 and7. We used the “color to indicate direction of the molecule feature” of AViz graphics. Each ofthe screenshots of the interface includes pre-calculated results for the energy and a visualizationof the state for selected cases. This project was described in [14]. The code is written forgeneralization to more complex potentials, and although some minor corrections have to bemade [15] this is, in principle, straightforward. The difficulty comes from the complications forthe annealing procedure when the potential complexity is increased to more than one type andsize of object. Pure LCs are relatively easy to anneal into groundstates. The addition of colloidscomplicates this greatly.

6. Groundstates of liquid crystals with colloidsSome liquid crystals are themselves colloids, but we study the case of small liquid crystalmolecules with a few large colloids. Once colloids are introduced, the groundstate stuctures

Figure 6. Screenshot of the interface at hightemperature, with AViz [14].

Figure 7. Screenshot of the interface at lowtemperature after annealing.

must satisfy minimal energy of the LCs as well as of their order around the colloids. The firstdecision is whether one requires the LCs to orient parallel or perpendicular to the colloids. Forthe 2d simulations parallel was selected, with an intuitive explanation that when you push 1rod-like object towards a big sphere-like object the rod-like object will try to be parallel inorder not to be squashed, all the other rod-like objects are more affected by the rod-like objectnear them than the sphere-like object which is much further away. The rod-like objects hada rejection between themselves and so tried to fill the space until they reached very close tothe colloid. Therefore there was also a rejection between rods and the colloid. The start andend configurations for two dimensional systems with a central colloid are shown in Fig. 8. Thefigures on the right have improved periodic boundary conditions; one of the additions made inthe colloid project.

Figure 8. Screenshot of the interface at low temperature after annealing; rightmost imageswith improved periodic boundary conditions.

Colloids with non-circular shapes were visualized by combining several spheres in rows orsquares.

7. Further improvements and three dimensional casesThe interactive interface shown in Figs.6 and 7 and Python based coding in [14] have been veryuseful for demonstration purposes, but three dimensions and colloids took an excessive time toequilibrate.

Thus, in order to proceed further a new C++ code was prepared, validated and then run, withsome examples given in Fig. 9. This code is many times more efficient and we are continuingits exploration. Details of the speedup are in Table 1, where the times are averages over alltemperatures. Note that in addition to the language change there are also some algorithmicchanges and bug fixes in the new code. In the Python code the potential of the whole system

was calculated from scratch at each Monte Carlo step! Even if we wanted to calculate thepotential of a certain radius, to find this radius we would have had to run through all themolecules to check if they were in the radius. The C++ implementation has a lookup table thatsaves all the potentials thus we need to calculate only the potentials needed for this change. Inaddition we added a discretization of the 3d space so we could know in O(1) (on average) theneighbor molecules. The time for one iteration (moving one molecule) is linear in the number ofmolecules; or to be more accurate O(1) is replaced by O(m), where ”m” is the number of gridcells that potential covers until it decays. Since ”m” depends only on the potential parameterswe can keep “m” fixed and extend the system to contain more and more LC molecules, keepingthe iteration time unchanged.

Table 1. Comparison of times for C++ and Python codes.

Model Steps Python time C++ time

5 × 5 molecules 100,000 21.25 mins 9.5 secs5 × 5 × 5 molecules 200,000 3.5 hours 52 secs11 × 11 × 11 molecules 500,000 6 days 8.33 mins

Figure 9. 3d sample images (l to r) A few steps after initial random state, about 25 percent done,35 percent, final configuration. The color of the liquid crystal molecules is selected according totheir angle to guide the eye.

The final structures around the colloids have similarities in 2d and 3d, with circular/sphericalsymmetries given enough development time. However, in our 3d example we selected anattraction between the colloid and LC and expected and found a “porcupine” structure. Theperiodic potential and periodic boundary conditions of the LC were already considered in theearlier implementation. In the latest one a periodic potential for the colloids in adjacent systemswas added. As expected we found similar result because the system is large relative to the colloidand the potential of adjacent colloids decays substantially when we look inside our system. Thefinal code can be found on Github [17], and some comments on [15].

One important issue at the level beyond educational codes with simulated annealing whenthe algorithm is molecular dynamics is the selection of ensemble such that there are minimalconstraints on the structural order. This has been studied intensively by Keiko Aoki and werefer the interested reader to her series of papers [16].

Figure 10. An enlargement of the final state shown in Fig. 9 and an analglyphic stereo version[18]. An animation can be found at: http://phycomp.technion.ac.il/∼phr7ja/newmovie.gif.

8. ConclusionsThis project began as a modest addition to the Technion Computational Physics groups seriesof educational projects on the simulation of liquid crystals, but was extended beyond the usualscope in order to create large three dimensional models. The structure of the final(?) states inthe three dimensional colloid samples as shown in Fig. 10 appears to be very interesting andwill be explored further in the future.

AcknowledgmentsSupport from SimPhoNy, an FP7 program of the European Commission (FP7-NMP-2013-SMALL-7) with grant number 604005 is acknowledged with thanks.

References[1] Mazvovsky D, Halioua G and Adler J Physics Procedia 2012 34 1-5[2] Adler J, Artzi Y, ben Bashat L, Izraeli T Y, Kreif M, Lavi I, Leibenzon A, Levi A, Schlesinger I, Toledano

E, Peretz U, Weisler Y and Alon Yagil 2014 Journal of Physics: Conference Series 510 012003[3] Adler J, Nissim G, Kiswani A 2017

IOP Conf. Series: Journal of Physics: Conf. Series 905 012017[4] Silverman A and Adler J 1992 Computers in Physics 6 277[5] Adler J and A. Berengoltz A 2000 in Recent Developments in Computer Simulation Studies in Condensed

Matter Physics XIII, Springer, edited by Landau D, Lewis SP and Schuttler B 71[6] Adler J, 1999 Am. J. Physics 67 1145[7] Glassball analog images of defects and grain boundaries by Netta Elad[8] http://phony1.technion.ac.il/∼aviz[9] Adler J 2003 Computers in Science and Engineering 5 61

[10] https://github.com/simphony/AViz[11] Adler J and Cohen O, 2010 Physics Procedia, 6 2[12] Gay JG and Berne BJ 1981 J. Chem. Phys. 74 3316[13] http://mw.concord.org/modeler/articles/beyondlj.pdf[14] Adler J, Glanz H and Izrael N 2014 Physics Procedia 57c 2[15] http://phony1.technion.ac.il/∼oshrih (with account cpstudent and password cppw16)[16] Aoki KM and Ohnishi S 2015 Molecular Crystals and Liquid Crystals 612:1 64[17] https://github.com/alexoshri/LC periodic[18] Peled D, Silverman A and Adler J 2013 IOP Conference Series 454 012076