Stainless steel clamp
Clamp with stainless steelstrip appropriate for pipeearthing, from 3/8’’ to 2’’, with4MA stainless steel contactscrews. (Connecting wiremax section 6 mm2).In accordance with IECStandards
Galvanised steel collarequipped with two screws,appropriate for pipe earthing.(Connecting wire max section16 mm2).In accordance with IECStandards
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
Galvanised steel collar Item ø in mm ø in inches Weight/each Pcs per box
Copper collar
Copper collar equipped withstainless steel screws,appropriate for pipe earthing.(Connecting wire max section16 mm2).
Item ø in mm ø in inches Weight/each Pcs per box
CMTR16 16-18 3/8” g 37 125
CMTR19 19-22 1/2” g 39 100
CMTR25 25-28 3/4” g 45 75
CMTR31 31-36 1” g 48 50
CMTR38 38-43 11/4” g 55 40
CMTR48 48-50 11/2” g 62 30
CMTR58 50-62 2” g 68 20
Item ø in inches Weight/each Pcs per box
FO 6 da 3/8 a 2” g 11 100
Available on request
CMT16 16-18 3/8” g 37 125
CMT19 19-22 1/2” g 39 100
CMT25 25-28 3/4” g 45 75
CMT31 31-36 1” g 48 50
CMT38 38-43 11/4” g 55 40
CMT48 48-50 11/2” g 62 30
CMT58 50-62 2” g 68 20
35
Clamp with 16 mm widthstainless steel stripappropriate for pipe earthing,from 3/8’’ to 6’’. (Connectingwire min. section 1x 2.5 mm2
and max. section 2x 16 mm2).In accordance with IECStandards
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
Stainless steel clamp Item ø in inches Weight/each Pcs per box
Stainless steel clamp
Clamp with 23 mm widthstainless steel strip appropriatefor pipe earthing, from 3/8’’ to6’’. (Connecting wire min.section 1x 2.5 mm2 and max.section 2x16 mm2).In accordance with IECStandards
FO 10 from 3/8’’ to 2’’ g 38 10
FO 11 from 3/8’’ to 4’’ g 45 10
FO 12 from 3/8’’ to 6’’ g 52 10
Item ø in inches Weight/each Pcs per box
FO 7 from 3/8’’ to 2’’ g 71 10
FO 8 from 3/8’’ to 4’’ g 77 10
FO 9 from 3/8’’ to 6’’ g 87 10
TR1015 red copper 10 9 150g 18 50
TR1020 red copper 10 9 200g 22 50
TR1615 red copper 16 9 150g 25 50
TR1620 red copper 16 9 200g 30 50
TR1625 red copper 16 9 250g 38 50
TR2515 red copper 25 9 150g 42 50
TR2520 red copper 25 9 200g 52 50
TR2525 red copper 25 9 250g 64 50
TR2530 red copper 25 9 300g 78 50
TR3520 red copper 35 9 200g 82 25
TR3525 red copper 35 9 250g 100 25
TR5025 red copper 50 11
Earthing plait for flexibleconnection.In accordance with IECStandards
Red copper earthing plait Item Material Sect. mm2 ø holes in mm Total length Weight Pcs per box
250g 140 25
in mm mm
36
Treccia di massa in rame stagnato Articolo Materiale Sezione mm2 Lungh. tot. mm Peso gr. Conf. pz.
NE10 g 350 10
Earthing plait for flexibleconnection.In accordance with IECStandards
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
Sectioning equipotential point
Sectioning equipotentialpoint, measure or connectionof earthing connectors to thereinforcing rods. Galvanisedsteel plate with 10 MA centralthreaded hole.
Item Weight/each Pcs per box
MC12 8÷12 + 8÷12 g 50 100
MC16 14÷16 + 14÷16 g 55 100
MC22 20÷22 + 20÷22 g 65 100
U-clamp
Galvanised steel U-clampappropriate to connect roundor orthogonal iron or cables.
Item Sections Weight/each Pcs per box
CO 2 3/8” g 65 10
CO 3 1/2” g 70 10
CO 4 3/4” g 80 10
CO 5 1” g 86 10
CO 6 11/4” g 95 10
CO 7 11/2” g 110 10
CO 9 13/4” g 120 10
CO 8 2” g 127 10
Zamak collar for pipes
Zamak collar for pipe earthing.For conductors up to max. 25mm2.In accordance with IECStandards
Item ø in inches Weight/each Pcs per box
TR1015S tinned copper 10 9 150 g 19 50
TR1020S tinned copper 10 9 200 g 24 50
TR1615S tinned copper 16 9 150 g 27 50
TR1620S tinned copper 16 9 200 g 33 50
TR1625S tinned copper 16 9 250 g 40 50
TR2515S tinned copper 25 9 150 g 44 50
TR2520S tinned copper 25 9 200 g 55 50
TR2525S tinned copper 25 9 250 g 67 50
TR2530S tinned copper 25 9 300 g 81 50
TR3520S tinned copper 35 9 200 g 85 25
TR3525S tinned copper 35 9 250 g 104 25
TR5025S tinned copper 50 11
Tinned copper earthing plait Item Material Sect. mm2 ø holes Total length Weight Pcs in mm mm
250 g 142 25
per perbox
37
CP 80 80 g 196 5
CP 90 90 g 219 5
CP 100 100 g 231 5
CP 110 110 g 249 5
CP 120 120 g 262 5
Galvanised steel collar for downpipe earthing
Hot-galvanised steel collarfor downpipe earthing.In accordance with IECStandards
Item ø in mm Weight/each Pcs per box
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
CPR 80 80 g 225 5
CPR 90 90 g 248 5
CPR 100 100 g 262 5
CPR 110 110 g 304 5
CPR 120 120 g 314 5
Copper collar for downpipe earthing
Copper collar for downpipeearthing.In accordance with IECStandards
Item ø in mm Weight/each Pcs per box
MOC g 35 10
Terminal board for equipotential connections
Nickel plated brass terminalboard appropriate forequipotential connections.Possibility to connect:- 6 protective wires with min.sect. 1.5 mm2 and max. 10mm2.- 1 earth wire with min. section6 mm2 and max. section 16mm2).In accordance with IECStandards
Item Weight/each Pcs per box
38
Terminal board for equipotential connections
Terminal board with supportfor horizontal snap fitting onguide DIN EN 50022, made ofpolyamide, with brass bar andgalvanised steel screwsappropriate for equipotentialconnections.In accordance with IECStandards
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
Item Rated sect. Wire sect. in mm2 N° of cables ø holes Pcs
Terminal board for equipotential connections
Copper terminal board forequipotential connections withsection 30 x 3 mm.Length: 200 mmStainless steel screws
Item Connecting wires Weight/each Pcs per box
PCE5 7x16 mm2 1,5-16 7 7 7 x ø6 4
1 bar of 7
PCE6 14x16 mm2 1,5-16 14 14 14 x ø6 4
2 bars of 7
PCE7 24x16 mm2 1,5-16 24 24 24 x ø6 2
4x25 mm2 4-25 4 4 4 x ø7,5
2 bars of 14
Copper terminal board forequipotential connections withsection 50 x 4 mm.Length: 250 mmStainless steel screws
Item Connecting wires Weight/each Pcs per box
PCE9 1 of 50÷120 mm2 Kg 0,600 1
3 of 35÷150 mm2
5 of max 35 mm2
Plate for equipotential connections
Tinned copper plate forequipotential connectionswith section 100 x 8 mm.Length: 250 mm
Item Holes Weight/each Pcs per box
PCE10 n. 8 of ø 13 Kg 1,170 1
PCE8 1 of 35 ÷ 50 mm2 Kg 0,235 1
4 of max 35 mm2
Terminal board for equipotential connections
perbox
in mmflexiblesolid
39
Anchor square
Hot-galvanised anchor squarefor PCE 12 ÷ PCE15 items withanchoring holes Ø 13 mm.Section: 40x 3 mm
Item Weight/each Pcs per box
PCE16 Kg 0,100 10
Plate for equipotential connections
Plate for equipotentialconnections.Section: 50 x 5 mm.Length: 280 mm
PCE14 n°14 of ø 13 hot-galvanised Kg 0,500 1
PCE15 n°14 of ø 13 stainless steel Kg 0,500 1
Item Holes Material Weight/each Pcs per box
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
Plates for equipotential connections
Copper plate for equipotentialconnections with section 60 x5 mm.Length: 240 mmProvided with copperedstainless steel screws.
PCE11 n. 1 of 12 MA Kg 0,750 1
n. 8 of 8 MA
Item Connecting wires Weight/each Pcs per box
Plate for equipotential connections
Plate for equipotentialconnections.Section: 40 x 5 mm.Length: 280 mm
PCE12 n°8 of ø 13 hot-galvanised Kg 0,430 1
PCE13 n°8 of ø 13 stainless steel Kg 0,430 1
Item Holes Material Weight/each Pcs per box
NEW
NEW
NEW
40
Terminal board for equipotential connections
Equipotential terminal boardwith 7, 11, 15 holes brass barand copper plate for primarythrough or terminal wires.Possibility to fix on DIN 50022guide.
Item Brass bar side Copper plate side Weight/each Pcs per boxø holes/ wire sect primary wires dimen.
ø 5,3 ø 6,9 ø 8,2 round bar metal strap1,5/10 6/16 16/35 ø mm max mmmm2 mm2 mm2
PCE18 n° 5 n°1 n°1 6-8-10 40x4 g 150 1
PCE19 n°9 n°1 n°1 6-8-10 40x4 g 190 1
PCE20 n°13 n°1 n°1 6-8-10 40x4 g 240 1
Terminal board for equipotential connections
Terminal board appropriatefor equipotential with ahinged cover which can besealed with lead on oneside.Possible connections:- 1 flat wire max. 30 x 4 mmor 1 round wire of Ø 7-10mm- 6 round wires with 6 – 25mm2.- 1 round wire with Ø 8 - 10mm or 50 mm2.In accordance with IECStandards
PCE3 g 160 10
Item Weight/each Pcs per box
GROUP 6 ACCESSORIES FOR EQUIPOTENTIAL CONNECTIONS
Terminal board for equipotential connections
Nickel plated brass terminalboard for equipotentialconnections.Possible connections:- 7 protective wires with 16mm2 max. sect.- 1 wire with min. Ø 7 mm ormax. Ø 10 mm- 1 flat wire max. 30 x 4 mmIn accordance with IECStandards
PCE1 g 292 6
Item Weight/each Pcs per box
Terminal board for equipotential connections
Nickel plated brass terminalboard appropriate forequipotential connections inspecial environments. Basewith plastic cover.Possible connections:- 14 wires with 6 mm2 max.sect.- 3 wires with 25 mm2 max.sect.In accordance with IECStandards
PCE2 g 266 6
Item Weight/each Pcs per box
41