GRUNDFOS DOSING Metering Pumps - cff3. · PDF fileDME and DMS DME 2 to 48 DME 60 to 940 DMS...

DME and DMS

DME 2 to 48

DME 60 to 940

DMS

DMS-D

GRUNDFOS PUMPS PRICE LISTEFFECTIVE DATE: FEBRUARY 1, 2010

Digital Dosing is here! With the easy to read digital display, whatyou set is what you get. Using the keypad, pump performance isset with the touch of a button. Each control variant offersa new level of functionality to satisfy your metering pump needs.

The fundamental difference between DME and DMS pumps is the type of electronically controlled motor used to drive them. The DMS utilizes a synchronous motor to vary stroke frequency upon demand. In addition, the DMS can be turned down to 1/100 of its maximum capacity. Depending on size, the DME's stepper or brushless DC motor varies the the discharge stroke speed. The extended discharge phase of the DME results in better, more even mixing, which can be turned down to 1/1000 (DME 2 to DME 48) or 1/800 (DME 60 to DME 940) of its maximum capacity.

The DME and DMS A, AR, and B versions all offer a digital keypad and easy to use menu. Capacity is set by adjusting the desired flow rate in g/h, l/h, or ml/h. Also included are a priming button, calibration mode, electronic lock, and internal counters of strokes, operating hours, and times the pump has been powered on/off.

These DME's offer the following methods of control: manual, external pulse, analog (0/4-20 mA), timer-based batch, and pulse-based batch. Additional standard functions include dosing monitoring, anti-cavitation, max-capacity limitation, and connections for level controls. An optional alarm relay is available with variant AR pumps. Optional fieldbus communication is available with variant AP (Profibus) pumps. Please contact Grundfos for details.

DMS- A pumps can be controlled manually, or with an external pulse or analog (0/4-20 mA) signal. Additional standard functions include connections for the dosing monitor and level controls. Optional alarm relays are also available on variant AR pumps.

The DMS- B offers basic manual control with the digital keypad.

GRUNDFOS DOSING Metering PumpsOverview

The DMS-D does not have a digital display, and is controlled by manipulating the power supply.

With all the features of the smaller DME's, the large models offer a basic manually controlled pump (variant B) or the externally controlled version with standard alarm relay (variant AR). Fieldbus communication is available with variant AP (Profibus). Please contact Grundfos for details.

4

DMEA, AR, AP g/h ml/h to l/h psi bar

2-18 0.00066 to 0.66 2.5 to 2.5 261 188-10 0.002 to 1.98 7.5 to 7.5 145 1012-6 0.0032 to 3.17 12 to 12 87 619-6 0.0049 to 4.88 18.5 to 18.5 89.9 6.248-3 0.0127 to 12.68 48 to 48 37.7 2.6

+/- 1% repeatability

DMEAR, B, AP g/h ml/h to l/h psi bar

60-10 0.0198 to 15.85 75 to 60 145 10150-4 0.0495 to 39.63 187.5 to 150 58 4375-10 0.13 to 99 468.75 to 375 145 10940-4 0.31 to 248.3 1175 to 940 58 4


DMSA, AR, B g/h ml/h to l/h psi bar

2-11 0.0066 to 0.66 25 to 2.5 160 114-7 0.0105 to 1.05 40 to 4 101.5 78-5 0.0198 to 1.98 75 to 7.5 78.3 5.412-3 0.0317 to 3.17 120 to 12 49.3 3.4


DMSD g/h l/h % Dev psi bar

2-11 1.03 3.9 +/- 20 160 114-7 1.82 6.9 +/- 18 101.5 78-5 2.75 10.4 +/- 8 78.3 5.412-3 4.33 16.4 +/- 6 49.3 3.4


Adjustable Flow Range Max Pressure

Max Flow Max Pressure

Adjustable Flow Range


Adjustable Flow Range Max Pressure

Max Pressure

GRUNDFOS DOSING Metering PumpsCapacity Guide

5

DME 2 to48 A, AR

DME 60 to

DME 60 to

DMS A, AR

DMS B DMS D

Stroke frequency control • • • • •

Stroke speed control • • •

Capacity setting in l/hr, ml/h, GPH • • • • •

Display with soft touch buttons and background light

• • • • •

Circular menu • • • • •

Multi-language options • • • • •

Start/Stop button • • • • •

Maximum capacity (Priming) button • • • • •

Green light for operating indication • • • • •

Red light for fault indication • • • • •

Control panel lock • • • • •

Front interface • • • • •

Side interface • • • •

Manual control • • • • •

Pulse control • • •

Analog 0/4-20 mA control • • •

Timer-based batch control • •

Pulse-based batch control • •

Dosing monitoring • • •

Dual level control • • •

Calibration function • • • • •

Anti-Cavitation (reduced suction speed) • • •

Capacity limitation • • •

Counter for strokes, operating hours and power on/off

• • • • •

Fieldbus communication Profibus (variant AP)

• •

Overload protection • •

Error message in display • •

Leak detection •

Dosing signal output •

Power supplySwitch mode (100-240 V, 50/60 Hz) • • •

Inputs/outputsPulse input • • •

Analog 0/4-20 mA input • • •

External start/stop input • • •

Alarm relay output (variant AR) • • •

Dosing output •

Functions


Capacity control

Control panel

Operating modes

GRUNDFOS DOSING Metering PumpsFunctional Overview

6

Standard type key

Example DME 2 - 18 A - PP / E / C - F - 2 1 R R B

Type range

Size

Control variant

Dosing head material

Gasket material

Valve ball material

Control panel position

Supply voltage

Check valves

Suction/Discharge connections

Power plug

DME 2 to 48Size Capacity2-18 0.66 g/h, 261 psi A Standard PP Polypropylene8-10 1.98 g/h, 145 psi AR Standard + Alarm Relay PV PVDF12-6 3.17 g/h, 87 psi AP Standard + Profibus SS 316 Stainless steel19-6 4.9 g/h, 90 psi48-3 12.7 g/h, 38 psi

E EPDM C Ceramic F Front fittedV FKM S 316 stainless steel S Side fittedT PTFE T PTFE

T Tubing 0.17" (ID) / 0.25" (OD)2 1 x 120 V, 60 Hz 1 Standard R Tubing 0.25" (ID) / 0.375" (OD)

2 Spring-loaded S Tubing 0.375" (ID) / 0.5" (OD)V Threaded NPT 0.25"*Y Threaded NPT 0.375"**

B USA, Canada 120 V X Threaded NPT 0.5" (Non SS pumps)

*DME 2, 8, and 12; only with SS head

**DME 19, 48; only with SS head

Note: All DME pumps are designed to operate at 1 x 100-240V, 50-60 Hz

Power Plug

Supply Voltage Check ValvesSuction/Discharge Connections


Control Variant Dosing Head Material

Gasket Material Valve Ball Material Control Panel Position

GRUNDFOS DOSING Metering Pumps

7

DME 60 to 940

Size Capacity60-10 15.9 g/h, 145 psi AR Standard + Alarm Relay PP Polypropylene150-4 39.6 g/h, 58 psi AP Standard + Profibus PV PVDF375-10 99 g/h, 145 psi B Basic SS 316 Stainless steel940-4 248.3 g/h, 58 psi

E EPDM C Ceramic (DME 60, 150) F Front fittedV FKM S 316 stainless steel S Side fittedT PTFE G Glass (DME 375, 940)

H Hastelloy C

2 1 x 120 V, 60 Hz 1 Standard A3 Threaded 0.75 FNPT2 Spring-loaded A4 1.25 FNPT

B USA, Canada 120 V

Notes: All DME pumps are designed to operate at 1 x 100-240V, 50-60 Hz

DMS

Size Capacity2-11 0.66 g/h, 160 psi A Standard PP Polypropylene4-7 1.05 g/h, 101 psi AR Standard + Alarm Relay PV PVDF8-5 1.98 g/h, 78 psi B Basic SS 316 Stainless steel12-3 3.17 g/h, 49 psi D Only on/off

*Pls see page 5 for DMS-D capacity

E EPDM C Ceramic F Front fittedV FKM S 316 stainless steel S Side fittedT PTFE T PTFE X No control Panel (all DMS-D pumps)

2 1 x 120 V, 60 Hz 1 Standard T Tubing 0.17" (ID) / 0.25" (OD)2 Spring-loaded R* Tubing 0.25" (ID) / 0.375" (OD)

S* Tubing 0.375" (ID) / 0.5" (OD)V Threaded NPT 0.25" (only SS pumps)

B USA, Canada 120 V X Threaded NPT 0.5" (Non SS pumps)

* Included with pumps with type key ending on RRB or SSB

Power Plug

Supply Voltage Check Valves Suction/Discharge Connections



Supply Voltage Check Valves Suction/Discharge Connections

Power Plug





8

Non-standard DME and DMS optionsCall factory for availability

22.20 37.00 52.80

22.20 72.90 123.00

Standard Standard 659.00

N/A 442.00 1115.00

N/A 0.00 Standard

0.00 0.00 0.00

22.20 N/A 523.00

131.00 190.00 228.00

761.00 1104.00 1218.00

685.00 N/A N/A

N/A N/A N/A

436.00 436.00 436.00

DME/DMS Pumps

Profibus module (DME AR only) Control variant AP, adder for AR version only*

Ball code Y

Spring-loaded valves

EPDM gasket on SS pumps

Ceramic balls in PP or PVDF pumps

2010 List adders [$ USD]

Model

Glass valve balls in PP or PVDF Ball code G

DME 2 to 48,DMS

DME 60 -DME 150

DME 375 -DME 940

Ball code C

Hastelloy valve balls in PP or PVDF pumps

* Non-standard lead time.

1/2" MNPT connections are available as accessories for PP and PVDF DME 2 to 48, and DMS pumps.

PTFE valve balls in PP or PVDF valve cartridge Ball code T

PTFE gasket in PVDF valve cartridge for PVDF pumps Gasket code T

Control variant AG, adder for AR version only*

Inspection certificate according to (EN10204 3.1.B) PN 96564713


International configurations: plug types, voltages, 50 Hz

Gasket code E

Valve code 2

Stainless steel valve balls in PP or PVDF pumps Ball code SS

Changes to Model Description

Genibus module (DME 2 - 48 only)

Metric inlet/discharge connections

Explosion Proof Not available

No adder to equivalent US version - includes pumps and accessories

See "type key" in Product Guide for codes


9

Pump HeadMaterial

Control Variant

Valve Ball Material

Connections,Suction/

Discharge[in]

Control Position

Gasket Material

ModelMaterial Number

List Price[$ USD]

ShipWeight

[lbs]

AB

C

Delivery

DME 2-18 0.66 GPH (2.5 l/h) up to 261 psi (18 bar)Front EPDM DME2-18 A-PP/E/C-F-21RRB 96470128 1,268.00 ASide EPDM DME2-18 A-PP/E/C-S-21RRB 96470129 1,298.00 AFront FKM DME2-18 A-PP/V/C-F-21RRB 96470130 1,268.00 BSide FKM DME2-18 A-PP/V/C-S-21RRB 96470131 1,298.00 CFront EPDM DME2-18 AR-PP/E/C-F-21RRB 96470135 1,366.00 ASide EPDM DME2-18 AR-PP/E/C-S-21RRB 96470136 1,394.00 AFront FKM DME2-18 AR-PP/V/C-F-21RRB 96470137 1,366.00 CSide FKM DME2-18 AR-PP/V/C-S-21RRB 96470138 1,394.00 CFront FKM DME2-18 A-PV/V/C-F-21RRB 96470133 1,442.00 ASide FKM DME2-18 A-PV/V/C-S-21RRB 96470134 1,472.00 A

Front FKM DME2-18 AR-PV/V/C-F-21RRB 96462440 1,540.00 ASide FKM DME2-18 AR-PV/V/C-S-21RRB 96470150 1,570.00 AFront FKM DME2-18 A-SS/V/SS-F-21VVB 96470153 1,852.00 ASide FKM DME2-18 A-SS/V/SS-S-21VVB 96470154 1,881.00 AFront FKM DME2-18 AR-SS/V/SS-F-21VVB 96470151 1,949.00 ASide FKM DME2-18 AR-SS/V/SS-S-21VVB 96470152 1,978.00 A

DME 8-10 1.98 GPH (7.5 l/h) up to 145 psi (10 bar)Front EPDM DME8-10 A-PP/E/C-F-21RRB 96470158 1,462.00 ASide EPDM DME8-10 A-PP/E/C-S-21RRB 96470159 1,493.00 AFront FKM DME8-10 A-PP/V/C-F-21RRB 96470160 1,462.00 ASide FKM DME8-10 A-PP/V/C-S-21RRB 96470161 1,493.00 AFront EPDM DME8-10 AR-PP/E/C-F-21RRB 96470219 1,561.00 ASide EPDM DME8-10 AR-PP/E/C-S-21RRB 96470224 1,590.00 AFront FKM DME8-10 AR-PP/V/C-F-21RRB 96462441 1,561.00 ASide FKM DME8-10 AR-PP/V/C-S-21RRB 96470230 1,590.00 AFront FKM DME8-10 A-PV/V/C-F-21RRB 96470217 1,637.00 ASide FKM DME8-10 A-PV/V/C-S-21RRB 96470218 1,667.00 AFront FKM DME8-10 AR-PV/V/C-F-21RRB 96470243 1,736.00 ASide FKM DME8-10 AR-PV/V/C-S-21RRB 96470248 1,765.00 AFront FKM DME8-10 A-SS/V/SS-F-21VVB 96470268 2,045.00 ASide FKM DME8-10 A-SS/V/SS-S-21VVB 96470272 2,076.00 AFront FKM DME8-10 AR-SS/V/SS-F-21VVB 96470251 2,144.00 ASide FKM DME8-10 AR-SS/V/SS-S-21VVB 96470255 2,172.00 A

DME 12-6 3.17 GPH (12 l/h) up to 89.9 psi (6.2 bar)Front EPDM DME12-6 A-PP/E/C-F-21RRB 96470274 1,462.00 ASide EPDM DME12-6 A-PP/E/C-S-21RRB 96470275 1,493.00 AFront FKM DME12-6 A-PP/V/C-F-21RRB 96470276 1,462.00 ASide FKM DME12-6 A-PP/V/C-S-21RRB 96470279 1,493.00 AFront EPDM DME12-6 AR-PP/E/C-F-21RRB 96470293 1,561.00 ASide EPDM DME12-6 AR-PP/E/C-S-21RRB 96470294 1,590.00 AFront FKM DME12-6 AR-PP/V/C-F-21RRB 96470296 1,561.00 ASide FKM DME12-6 AR-PP/V/C-S-21RRB 96470297 1,590.00 AFront FKM DME12-6 A-PV/V/C-F-21RRB 96470284 1,637.00 ASide FKM DME12-6 A-PV/V/C-S-21RRB 96470288 1,667.00 AFront FKM DME12-6 AR-PV/V/C-F-21RRB 96470328 1,736.00 ASide FKM DME12-6 AR-PV/V/C-S-21RRB 96470329 1,765.00 AFront FKM DME12-6 A-SS/V/SS-F-21VVB 96470331 2,045.00 ASide FKM DME12-6 A-SS/V/SS-S-21VVB 96470332 2,076.00 AFront FKM DME12-6 AR-SS/V/SS-F-21VVB 96470330 2,144.00 ASide FKM DME12-6AR-SS/V/SS-S-21VVB 96462476 2,172.00 A

Standard DME 2 to 48 LPH available in 5 days.PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery


PP

A

Ceramic 1/4 or 3/8*

5.0

AR

PVDFA

Ceramic 1/4 or 3/8*AR

SSA

SS 1/4" NPTAR

PP

A

Ceramic 1/4 or 3/8*

5.0

AR

PVDFA


SSA

SS

SSA

SS

1/4" NPTAR

PP

A

Ceramic 1/4 or 3/8*

PVDF

1/4" NPTAR

5.0

AR

ACeramic 1/4 or 3/8*

AR

GRUNDFOS DOSING Metering PumpsDME, 50/60 Hz, 100-240V with US 120V Plug

10

Pump HeadMaterial

Control Variant

Valve Ball Material


Discharge[in]

Control Position

Gasket Material


List Price[$ USD]

ShipWeight

[lbs]

AB

C

Delivery

DME 19-6 4.88 GPH (18.5 l/h) up to 87 psi (6 bar)Front EPDM DME19-6 A-PP/E/C-F-21SSB 96470333 1,756.00 ASide EPDM DME19-6 A-PP/E/C-S-21SSB 96470344 1,783.00 AFront FKM DME19-6 A-PP/V/C-F-21SSB 96470350 1,756.00 CSide FKM DME19-6 A-PP/V/C-S-21SSB 96470351 1,783.00 CFront EPDM DME19-6 AR-PP/E/C-F-21SSB 96462477 1,852.00 ASide EPDM DME19-6 AR-PP/E/C-S-21SSB 96470354 1,881.00 AFront FKM DME19-6 AR-PP/V/C-F-21SSB 96470355 1,852.00 CSide FKM DME19-6 AR-PP/V/C-S-21SSB 96470356 1,881.00 CFront FKM DME19-6 A-PV/V/C-F-21SSB 96470352 1,969.00 CSide FKM DME19-6 A-PV/V/C-S-21SSB 96470353 1,998.00 BFront FKM DME19-6 AR-PV/V/C-F-21SSB 96470357 2,067.00 BSide FKM DME19-6 AR-PV/V/C-S-21SSB 96470358 2,096.00 CFront FKM DME19-6 A-SS/V/SS-F-21YYB 96470361 2,437.00 ASide FKM DME19-6 A-SS/V/SS-S-21YYB 96470362 2,465.00 AFront FKM DME19-6 AR-SS/V/SS-F-21YYB 96470359 2,534.00 ASide FKM DME19-6 AR-SS/V/SS-S-21YYB 96470360 2,562.00 A

DME 48-3 12.68 GPH (48 l/h) up to 37.7 psi (2.6 bar)Front EPDM DME48-3 A-PP/E/C-F-21SSB 96470363 1,949.00 ASide EPDM DME48-3 A-PP/E/C-S-21SSB 96470364 1,978.00 AFront FKM DME48-3 A-PP/V/C-F-21SSB 96470365 1,949.00 ASide FKM DME48-3 A-PP/V/C-S-21SSB 96470366 1,978.00 AFront EPDM DME48-3 AR-PP/E/C-F-21SSB 96470370 2,045.00 ASide EPDM DME48-3 AR-PP/E/C-S-21SSB 96470371 2,076.00 AFront FKM DME48-3 AR-PP/V/C-F-21SSB 96470372 2,045.00 ASide FKM DME48-3 AR-PP/V/C-S-21SSB 96470373 2,076.00 AFront FKM DME48-3 A-PV/V/C-F-21SSB 96470367 2,162.00 ASide FKM DME48-3 A-PV/V/C-S-21SSB 96470369 2,194.00 AFront FKM DME48-3 AR-PV/V/C-F-21SSB 96470374 2,260.00 ASide FKM DME48-3 AR-PV/V/C-S-21SSB 96462491 2,289.00 AFront FKM DME48-3 A-SS/V/SS-F-21YYB 96470377 2,631.00 ASide FKM DME48-3 A-SS/V/SS-S-21YYB 96470378 2,660.00 AFront FKM DME48-3 AR-SS/V/SS-F-21YYB 96470375 2,727.00 ASide FKM DME48-3 AR-SS/V/SS-S-21YYB 96470376 2,756.00 A

Standard DME 2 to 48 LPH available in 5 days.PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery


PP

A

Ceramic 3/8 or 1/2*

7.5

AR

PVDFA


SSA

SS 3/8" NPTAR

PP

A

Ceramic 3/8 or 1/2*

PVDF

SSA

SS


7.5

AR

3/8" NPTAR

A


11

Pump Head

Material

Control Variant

Valve Ball Material


Discharge

Gasket Material

Control Position


List Price [$ USD]

Ship weight [lbs]

AB

C

Delivery

DME 60-10 15.85 GPH (60 l/h) up to 145 psi (10 bar)Front DME60-10 AR-PP/E/C-F-21A3A3B 96528925 3,510.00 CSide DME60-10 AR-PP/E/C-S-21A3A3B 96528926 3,562.00 CFront DME60-10 AR-PP/V/C-F-21A3A3B 96528927 3,510.00 CSide DME60-10 AR-PP/V/C-S-21A3A3B 96528928 3,562.00 CFront DME60-10 B-PP/E/C-F-21A3A3B 96528973 2,636.00 CSide DME60-10 B-PP/E/C-S-21A3A3B 96528974 2,687.00 CFront DME60-10 B-PP/V/C-F-21A3A3B 96528975 2,636.00 CSide DME60-10 B-PP/V/C-S-21A3A3B 96528976 2,687.00 CFront DME60-10 AR-PV/V/C-F-21A3A3B 96528929 3,790.00 CSide DME60-10 AR-PV/V/C-S-21A3A3B 96528970 3,841.00 CFront DME60-10 B-PV/V/C-F-21A3A3B 96528977 2,915.00 CSide DME60-10 B-PV/V/C-S-21A3A3B 96528978 2,966.00 CFront DME60-10 AR-SS/V/SS-F-21A3A3B 96528971 4,388.00 CSide DME60-10 AR-SS/V/SS-S-21A3A3B 96528972 4,441.00 CFront DME60-10 B-SS/V/SS-F-21A3A3B 96528980 3,515.00 CSide DME60-10 B-SS/V/SS-S-21A3A3B 96528981 3,565.00 C

DME 150-4 39.6 GPH (150 l/h) up to 58 psi (4 bar)Front DME150-4 AR-PP/E/C-F-21A3A3B 96528982 3,805.00 CSide DME150-4 AR-PP/E/C-S-21A3A3B 96528983 3,857.00 CFront DME150-4 AR-PP/V/C-F-21A3A3B 96528984 3,805.00 CSide DME150-4 AR-PP/V/C-S-21A3A3B 96528985 3,857.00 CFront DME150-4 B-PP/E/C-F-21A3A3B 96528990 2,925.00 CSide DME150-4 B-PP/E/C-S-21A3A3B 96528991 2,977.00 CFront DME150-4 B-PP/V/C-F-21A3A3B 96528994 2,925.00 CSide DME150-4 B-PP/V/C-S-21A3A3B 96528996 2,977.00 CFront DME150-4 AR-PV/V/C-F-21A3A3B 96528986 4,106.00 CSide DME150-4 AR-PV/V/C-S-21A3A3B 96528987 4,158.00 CFront DME150-4 B-PV/V/C-F-21A3A3B 96528998 3,226.00 CSide DME150-4 B-PV/V/C-S-21A3A3B 96528999 3,278.00 CFront DME150-4 AR-SS/V/SS-F-21A3A3B 96528988 4,754.00 CSide DME150-4 AR-SS/V/SS-S-21A3A3B 96528989 4,805.00 CFront DME150-4 B-SS/V/SS-F-21A3A3B 96529001 3,875.00 CSide DME150-4 B-SS/V/SS-S-21A3A3B 96529003 3,927.00 C

LEAD TIME: 5 days for pumps with FRONT panels. Call factory for other models.PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.Note: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery)


FKMB

SSAR

SS 3/4" FNPT

EPDM

FKM

PVDFAR

Ceramic 3/4" FNPT FKMB

EPDM

FKM

B

SS

PP

AR

Ceramic 3/4" FNPT

ARSS

EPDM

FKM

FKM

FKMB

ARCeramic 3/4" FNPT

B

3/4" FNPT

25

26

PP

AR

Ceramic 3/4" FNPT

EPDM

FKM

B

PVDF


12

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material

Inlet/ Discharge Connections

Control Position


List Price [$ USD]

Ship weight [lbs]

AB

C

Delivery

Front DME 375-10 AR-PP/E/G-F-21A4A4B 96529006 5,731.00 C

Side DME 375-10 AR-PP/E/G-S-21A4A4B 96529114 5,807.00 C

Front DME 375-10 AR-PP/V/G-F-21A4A4B 96529116 5,731.00 C

Side DME 375-10 AR-PP/V/G-S-21A4A4B 96529117 5,807.00 C

Front DME 375-10 AR-PV/V/G-F-21A4A4B 96529118 6,420.00 C

Side DME 375-10 AR-PV/V/G-S-21A4A4B 96529119 6,495.00 C

Front DME 375-10 AR-SS/V/SS-F-21A4A4B 96529120 6,914.00 C

Side DME 375-10 AR-SS/V/SS-S-21A4A4B 96529121 6,988.00 C

Front DME 375-10 B-PP/E/G-F-21A4A4B 96529123 4,804.00 C

Side DME 375-10 B-PP/E/G-S-21A4A4B 96529124 4,879.00 C

Front DME 375-10 B-PP/V/G-F-21A4A4B 96529125 4,804.00 B

Side DME 375-10 B-PP/V/G-S-21A4A4B 96529126 4,879.00 C

Front DME 375-10 B-PV/V/G-F-21A4A4B 96529128 5,492.00 C

Side DME 375-10 B-PV/V/G-S-21A4A4B 96529130 5,567.00 C

Front DME 375-10 B-SS/V/SS-F-21A4A4B 96529132 5,986.00 C

Side DME 375-10 B-SS/V/SS-S-21A4A4B 96529135 6,060.00 C

Front DME 940-4 AR-PP/E/G-F-21A4A4B 95905941 6,809.00 C

Side DME 940-4 AR-PP/E/G-S-21A4A4B 96529139 6,884.00 C

Front DME940-4 AR-PP/V/G-F-21A4A4B 96529151 6,809.00 B

Side DME 940-4 AR-PP/V/G-S-21A4A4B 96529155 6,884.00 C

Front DME 940-4 AR-PV/V/G-F-21A4A4B 96529158 7,654.00 C

Side DME 940-4 AR-PV/V/G-S-21A4A4B 96529160 7,729.00 C

Front DME 940-4 AR-SS/V/SS-F-21A4A4B 96529161 8,257.00 C

Side DME 940-4 AR-SS/V/SS-S-21A4A4B 96529162 8,331.00 C

Front DME 940-4 B-PP/E/G-F-21A4A4B 96529163 5,885.00 C

Side DME 940-4 B-PP/E/G-S-21A4A4B 96529164 5,960.00 C

Front DME 940-4 B-PP/V/G-F-21A4A4B 96529165 5,885.00 C

Side DME 940-4 B-PP/V/G-S-21A4A4B 96529166 5,960.00 C

Front DME 940-4 B-PV/V/G-F-21A4A4B 96529167 6,730.00 C

Side DME 940-4 B-PV/V/G-S-21A4A4B 96529168 6,806.00 C

Front DME 940-4 B-SS/V/SS-F-21A4A4B 96529169 7,333.00 C

Side DME 940-4 B-SS/V/SS-S-21A4A4B 96529170 7,407.00 C

LEAD TIME: 5 days for pumps with FRONT panels. Call factory for other models.PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.Note: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery)

SS 316 SS

B

PP

EPDM

Glass

FKMPVDF

316 SS


FKMPVDF

SS

SS

DME 940-4 248.3 GPH (940 l/h) up to 58 psi (4 bar)

316 SS

AR

PP

Glass

47

B

PP

DME 375-10 99 GPH (375 l/h) up to 145 psi (10 bar)

EPDM

Glass

FKMPVDF

SS 316 SS

EPDM

501 1/4" FNPT

AR

1 1/4" FNPT

PVDF FKM

Glass

EPDM

PP


13

Pump HeadMaterial

Control Variant

Valve Ball Material


Discharge[in]

Control Position

Gasket Material


List Price [$ USD]

ShipWeight

[lbs]

AB

C

Delivery

DMS 2-11 0.66 GPH (2.5 l/h) up to 160 psi (11 bar)Front EPDM DMS2-11 A-PP/E/C-F-21RRB 96469328 871.00 ASide EPDM DMS2-11 A-PP/E/C-S-21RRB 96469358 898.00 AFront FKM DMS2-11 A-PP/V/C-F-21RRB 96469376 871.00 CSide FKM DMS2-11 A-PP/V/C-S-21RRB 96469377 898.00 CFront EPDM DMS2-11 AR-PP/E/C-F-21RRB 96469391 959.00 ASide EPDM DMS2-11 AR-PP/E/C-S-21RRB 96469392 986.00 AFront FKM DMS2-11 AR-PP/V/C-F-21RRB 96469394 959.00 CSide FKM DMS2-11 AR-PP/V/C-S-21RRB 96469399 986.00 CFront EPDM DMS2-11 B-PP/E/C-F-21RRB 96469451 699.00 AFront FKM DMS2-11 B-PP/V/C-F-21RRB 96469456 699.00 CNone EPDM DMS2-11 D-PP/E/C-X-21RRB 96508016 462.00 CNone FKM DMS2-11 D-PP/V/C-X-21RRB 96508017 462.00 CFront FKM DMS2-11 A-PV/V/C-F-21RRB 96469378 1,028.00 ASide FKM DMS2-11 A-PV/V/C-S-21RRB 96469390 1,055.00 AFront FKM DMS2-11 AR-PV/V/C-F-21RRB 96469403 1,116.00 ASide FKM DMS2-11 AR-PV/V/C-S-21RRB 96469408 1,142.00 A

B Front FKM DMS2-11 B-PV/V/C-F-21RRB 96469467 854.00 A

D* None FKM DMS2-11 D-PV/V/C-X-21RRB 96508019 497.00 CFront FKM DMS2-11 A-SS/V/SS-F-21VVB 96469419 1,395.00 ASide FKM DMS2-11 A-SS/V/SS-S-21VVB 96469424 1,418.00 AFront FKM DMS2-11 AR-SS/V/SS-F-21VVB 96469411 1,480.00 ASide FKM DMS2-11 AR-SS/V/SS-S-21VVB 96469414 1,506.00 A

B Front FKM DMS2-11 B-SS/V/SS-F-21VVB 96462492 1,221.00 AD* None FKM DMS2-11 D-SS/V/SS-X-21VVB 96508090 716.00 C

DMS 4-7 1.05 GPH (4 l/h) up to 101.5 psi (7 bar)Front EPDM DMS4-7 A-PP/E/C-F-21RRB 96469468 871.00 ASide EPDM DMS4-7 A-PP/E/C-S-21RRB 96469469 898.00 AFront FKM DMS4-7 A-PP/V/C-F-21RRB 96469470 871.00 ASide FKM DMS4-7 A-PP/V/C-S-21RRB 96469471 898.00 AFront EPDM DMS4-7 AR-PP/E/C-F-21RRB 96469474 959.00 ASide EPDM DMS4-7 AR-PP/E/C-S-21RRB 96469487 986.00 AFront FKM DMS4-7 AR-PP/V/C-F-21RRB 96469489 959.00 ASide FKM DMS4-7 AR-PP/V/C-S-21RRB 96469490 986.00 AFront EPDM DMS4-7 B-PP/E/C-F-21RRB 96469513 699.00 AFront FKM DMS4-7 B-PP/V/C-F-21RRB 96462493 699.00 ANone EPDM DMS4-7 D-PP/E/C-X-21RRB 96508091 462.00 CNone FKM DMS4-7 D-PP/V/C-X-21RRB 96508092 462.00 CFront FKM DMS4-7 A-PV/V/C-F-21RRB 96469472 1,028.00 ASide FKM DMS4-7 A-PV/V/C-S-21RRB 96469473 1,055.00 AFront FKM DMS4-7 AR-PV/V/C-F-21RRB 96469492 1,116.00 ASide FKM DMS4-7 AR-PV/V/C-S-21RRB 96469508 1,142.00 A

B Front FKM DMS4-7 B-PV/V/C-F-21RRB 96469514 854.00 AD* None FKM DMS4-7 D-PV/V/C-X-21RRB 96508093 497.00 C

Front FKM DMS4-7 A-SS/V/SS-F-21VVB 96469511 1,395.00 ASide FKM DMS4-7 A-SS/V/SS-S-21VVB 96469512 1,418.00 AFront FKM DMS4-7 AR-SS/V/SS-F-21VVB 96469509 1,480.00 ASide FKM DMS4-7 AR-SS/V/SS-S-21VVB 96469510 1,506.00 A


LEAD TIME: 5 days.PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*See pg 5 for DMS D capacity range**1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery


SS

A

SS 1/4" NPTAR

PP

A

Ceramic 1/4 or 3/8**

5.0

AR

B

D*

A

Ceramic 1/4 or 3/8**ARPVDF

PP Ceramic 1/4 or 3/8**

AR

AR

B

D*

A5.0

PVDF Ceramic 1/4 or 3/8**

SS

A

SS 1/4" NPTAR

A

GRUNDFOS DOSING Metering PumpsDMS, 60 Hz, 120V with US 120V Plug

14

Pump Head

Material

Control Variant

Valve Ball Material


Discharge[in]

Control Position

Gasket Material


List Price[$ USD]

ShipWeight

[lbs]

AB

C

Delivery

DMS 8-5 1.98 GPH (7.5 l/h) up to 78.3 psi (5.4 bar)Front EPDM DMS8-5 A-PP/E/C-F-21RRB 96469516 871.00 ASide EPDM DMS8-5 A-PP/E/C-S-21RRB 96469523 898.00 AFront FKM DMS8-5 A-PP/V/C-F-21RRB 96469529 871.00 ASide FKM DMS8-5 A-PP/V/C-S-21RRB 96469534 898.00 AFront EPDM DMS8-5 AR-PP/E/C-F-21RRB 96462494 959.00 ASide EPDM DMS8-5 AR-PP/E/C-S-21RRB 96469637 986.00 AFront FKM DMS8-5 AR-PP/V/C-F-21RRB 96469638 959.00 ASide FKM DMS8-5 AR-PP/V/C-S-21RRB 96469651 986.00 AFront EPDM DMS8-5 B-PP/E/C-F-21RRB 96469676 699.00 AFront FKM DMS8-5 B-PP/V/C-F-21RRB 96469678 699.00 ANone EPDM DMS8-5 D-PP/E/C-X-21RRB 96508095 462.00 CNone FKM DMS8-5 D-PP/V/C-X-21RRB 96508097 462.00 CFront FKM DMS8-5 A-PV/V/C-F-21RRB 96469537 1,028.00 ASide FKM DMS8-5 A-PV/V/C-S-21RRB 96469636 1,055.00 AFront FKM DMS8-5 AR-PV/V/C-F-21RRB 96469656 1,116.00 ASide FKM DMS8-5 AR-PV/V/C-S-21RRB 96469659 1,142.00 A

B Front FKM DMS8-5 B-PV/V/C-F-21RRB 96469682 854.00 A

D* None FKM DMS8-5 D-PV/V/C-X-21RRB 96508098 497.00 CFront FKM DMS8-5 A-SS/V/SS-F-21VVB 96469672 1,395.00 ASide FKM DMS8-5 A-SS/V/SS-S-21VVB 96469675 1,418.00 AFront FKM DMS8-5 AR-SS/V/SS-F-21VVB 96469663 1,480.00 ASide FKM DMS8-5 AR-SS/V/SS-S-21VVB 96469668 1,506.00 A


DMS 12-3 3.17 GPH (12 l/h) up to 49.3 psi (3.4 bar)Front EPDM DMS12-3 A-PP/E/C-F-21RRB 96469700 871.00 ASide EPDM DMS12-3 A-PP/E/C-S-21RRB 96469703 898.00 AFront FKM DMS12-3 A-PP/V/C-F-21RRB 96469707 871.00 ASide FKM DMS12-3 A-PP/V/C-S-21RRB 96469711 898.00 AFront EPDM DMS12-3 AR-PP/E/C-F-21RRB 96469722 959.00 ASide EPDM DMS12-3 AR-PP/E/C-S-21RRB 96469726 986.00 AFront FKM DMS12-3 AR-PP/V/C-F-21RRB 96469730 959.00 ASide FKM DMS12-3 AR-PP/V/C-S-21RRB 96469734 986.00 AFront EPDM DMS12-3 B-PP/E/C-F-21RRB 96469775 699.00 AFront FKM DMS12-3 B-PP/V/C-F-21RRB 96469777 699.00 ANone EPDM DMS12-3 D-PP/E/C-X-21RRB 96508100 462.00 CNone FKM DMS12-3 D-PP/V/C-X-21RRB 96508101 462.00 CFront FKM DMS12-3 A-PV/V/C-F-21RRB 96469714 1,028.00 ASide FKM DMS12-3 A-PV/V/C-S-21RRB 96469718 1,055.00 AFront FKM DMS12-3 AR-PV/V/C-F-21RRB 96469735 1,116.00 ASide FKM DMS12-3 AR-PV/V/C-S-21RRB 96462495 1,142.00 A

B Front FKM DMS12-3 B-PV/V/C-F-21RRB 96469786 854.00 AD* None FKM DMS12-3 D-PV/V/C-X-21RRB 96508103 497.00 C

Front FKM DMS12-3 A-SS/V/SS-F-21VVB 96469766 1,395.00 ASide FKM DMS12-3 A-SS/V/SS-S-21VVB 96469771 1,418.00 AFront FKM DMS12-3 AR-SS/V/SS-F-21VVB 96469763 1,480.00 ASide FKM DMS12-3 AR-SS/V/SS-S-21VVB 96469764 1,506.00 A


LEAD TIME: 5 days.PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*See pg 5 for DMS D capacity range**1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery


A

SS 1/4" NPTAR

A

AR

AR

B

Ceramic

PVDF

PP

PP

AR

1/4 or 3/8**

5.0

PVDF Ceramic 1/4 or 3/8**

SS

D*

A

5.0

AR

B

D*

A


A


SS

A

SS 1/4" NPTAR

GRUNDFOS DOSING Metering PumpsDMS, 60 Hz, 120V with US 120V Plug

15

DDI

DMI

DMX

DMH

DMX and DMH - Customized to fit your application


Formerly known as the TrueDos 209 and 222 from Alldos, these Digital Dosing pumps feature a speed controlled motor for smooth continuous feed. The DDI 209 is available with the optional Plus3 system so gases that might cause most pumps to lose prime vent automatically . The standard AR version allows for capacity to be adjusted manually using the keypad, or remotely with an analog (0/4-20 mA) or pulse contact. For additinal monitoring and security, select a DDI AF with a built-in flow monitor that can sense gases from the pump head, cavitation, and pressure changes that result from line breaks or a blocked discharge. For Fieldbus communication, use the DDI AP that's Profibus ready.

The DMX 221 and 226 are motor driven mechanically actuated diaphragm metering pumps. The DMX can be configured to meet the demands in a variety of applications. Manually change the stroke length of the DMX B to reduce capacity. For external control the DMX AR (Etron Profi) can receive a pulse or analog signal. The DMX 226 is available in a duplex version for doubled capacity. For additional control, use a servo motor to externally control the stroke length. Please contact Grundfos for details.

These mechanically actuated hydraulic diaphragm pumps were formerly known as the Alldos KM and are available in simplex and duplex versions. Like the DMX, manually control capacity of a DMH B by adjusting the stroke length, or use the AR version for external control (only up to and including KM 253).

DDI and DMI with Plus3 heads

The DMI 208 features a synchronous motor that reduces the shock and vibration common to most solenoid driven pumps. Control capacity manually by adjusting the stroke length (variant B), or use the A version for remote on/off and pulse frequency control. For external control with alarm output, use the DMI AR. The DMI can also be fitted with the Plus3 system to faciliate handling of difficult fluids like sodium hypochlorite.

Simplex Variant AR Duplex

Intregral pressure relief valve

Servo motor for external control

AR with servo motor

GRUNDFOS DOSING Metering PumpsOverview

16

Model Size GPH PSI Str/Min Std Connections

DMI 208 0.3-10 0.095 145 144 DN 4

DDI 209 0.4-10 0.1 145 180 DN 4

DMI 208 0.8-16 0.25 232 144 DN 4

DMI 208 1.0-10 0.32 145 144 DN 4

DMI 208 1.1-16 0.35 232 144 DN 4

DMI 208 1.6-10 0.51 145 144 DN 4

DDI 209 2.2-16 0.58 232 180 DN 4

DDI 209 2.5-10 0.66 145 180 DN 4

DMI 208 3.0-10 0.92 101.5 144 DN 4

DMI 208 3.6-16 1.14 189 144 DN 4

DMI 208 4.0-8 1.27 87 144 DN 4

DMX 221 4-10 1.3 145 35 DN 8

DDI 209 5.5-10 1.45 145 180 DN 4

DMI 208 5.0-6 1.58 72.5 144 DN 4

DMI 208 6.0-8 1.9 87 144 DN 4

DMX 221 7-10 2.1 145 35 DN 8

DMX 221 7.2-16 2.3 232 75 DN 8

DMX 221 8-10 2.6 145 75 DN 8

DMI 208 9.0-6 2.9 79.8 144 DN 8

DMX 221 9-10 2.9 145 35 DN 8

DDI 209 13.8-4 3.64 58 180 DN 8

DMX 221 12-10 3.7 145 35 DN 8

DMX 221 13.7-16 4 232 144 DN 8

DMI 208 14-4 4.44 43.5 144 DN 8

DMX 221 14-10 4.5 145 75 DN 8

DMX 221 16-10 5 145 144 DN 8

DDI 209 20-3 5.28 43.5 180 DN 8

DMX 221 17-4 5.3 58 35 DN 20

DMI 208 18-3.5 5.7 43.5 144 DN 8

DMX 221 18-10 5.8 145 75 DN 8

DMX 221 25-3 7.9 43.5 35 DN 20

DMX 221 26-10 8.2 145 75 DN 8

DMX 221 27-10 8.4 145 144 DN 8

DMX 221 35-10 11 145 144 DN 8

DMX 221 39-4 12 58 75 DN 20

DDI 222 60-10 15.8 145 180 DN 8

DMX 221 50-10 16 116 144 DN 8

DMX 226 52-8 16.4 116 75.6 -

DMX 221 60-3 19 43.5 75 DN 20

DMX 226 67-10 21.1 145 68.4 DN 20

DMX 221 75-3.5 24 50.8 144 DN 20

DMX 226 82-5 25.9 72 75.6 -

DMX 226 95-8 30 116 68.4 DN 20

DMX 226 100-8 31.7 116 144 -

DMX 221 115-3 36 36.3 144 DN 20

DDI 222 150-4 39.6 58 180 DN 20

DMX 226 130-3 41.2 43.5 75.6 -

DMX 226 132-10 41.7 116 144 DN 20

DMX 226 152-6 48 87 68.4 DN 20

DMX 226 160-5 50.7 72 144 -

DMX 226 199-8 63.1 116 144 DN 20

DMX 226 249-3 78.9 43.5 68.4 DN 32

DMX 226 255-3 80.8 43.5 144 -

DMX 226 321-6 102 58 144 DN 20

DMX 226 525-3 166.3 43.5 144 DN 32

DMX 226 and DMH available in Duplex configuration for double capacity.


GRUNDFOS DOSING Metering PumpsDDI, DMI, DMX, (Alldos line) Capacity Overview

17

Model Size GPH PSI Str/Min Std Connections Model Size GPH PSI Str/Min Std Connections

DMH 280 1.3-200 0.50 2900 76 DN 4 DMH 255 194-10 61.50 145 65 20

DMH 281 2-100 0.60 1450 35 DN 8 DMH 254 202-16 63.90 232 134 20

DMH 251 2.2-25 0.69 363 17 DN 8 DMH 254 213-10 67.30 145 134 20

DMH 280 2.2-200 0.70 2900 115 DN 4 DMH 257 220-10 69.70 145 33 32

DMH 251 2.3-16 0.74 232 17 DN 8 DMH 255 270-10 85.50 145 90 20

DMH 251 2.4-10 0.77 145 17 DN 8 DMH 255 332-10 105.00 145 110 20

DMH 280 2.5-200 0.90 2900 144 DN 4 DMH 255 403-10 128.00 145 134 20

DMH 281 4.2-100 1.30 1450 76 DN 8 DMH 257 440-10 139.40 145 65 32

DMH 251 4.5-25 1.43 363 35 DN 8 DMH 257 575-10 182.20 145 90 32

DMH 251 4.9-16 1.55 232 35 DN 8 DMH 257 770-10 244.00 145 110 32

DMH 251 5-10 1.58 145 35 DN 8 DMH 257 880-10 278.00 145 134 32

DMH 281 6.4-100 2.00 1450 115 DN 8

DMH 288 7.5-200 2.40 2900 67 DN 8

DMH 281 8-100 2.50 1450 144 DN 8

DMH 252 10-16 3.17 232 35 DN 8

DMH 288 10-200 3.30 2900 88 DN 8

DMH 251 11-25 3.43 363 75 DN 8

DMH 252 11-10 3.45 145 35 DN 8

DMH 251 12-16 3.70 232 75 DN 8

DMH 288 13-200 4.10 2900 118 DN 8

DMH 251 13-10 4.22 145 75 DN 8

DMH 288 15-200 4.90 2900 134 DN 8

DMH 251 17-25 5.28 363 115 DN 8

DMH 287 18-200 5.80 2900 67 DN 8

DMH 251 18-16 5.81 232 115 DN 8

DMH 251 19-10 6.07 145 115 DN 8

DMH 283 19-100 6.10 1450 65 DN 20

DMH 285 20-100 6.30 1450 33 DN 20

DMH 253 21-10 6.60 145 35 DN 20

DMH 252 23-16 7.13 232 75 DN 8

DMH 287 23-200 7.40 2900 88 DN 8

DMH 252 24-10 7.66 145 75 DN 8

DMH 283 27-100 8.40 1450 90 DN 20

DMH 287 31-200 9.80 2900 118 DN 8

DMH 283 33-100 10.60 1450 110 DN 20

DMH 252 36-16 11.35 232 115 DN 8

DMH 287 36-200 11.40 2900 134 DN 8

DMH 252 37-10 11.62 145 115 DN 8

DMH 283 40-100 12.70 1450 134 DN 20

DMH 253 43-10 13.70 145 75 DN 20

DMH 254 50-10 15.80 145 32 DN 20

DMH 285 52-100 16.60 1450 88 DN 20

DMH 253 67-10 20.60 145 115 DN 20

DMH 285 70-100 22.20 1450 118 DN 20

DMH 285 80-100 25.30 1450 134 DN 20

DMH 253 83-10 26.10 145 144 DN 20

DMH 286 85-50 26.90 725 67 DN 20

DMH 254 97-16 30.60 232 65 DN 20

DMH 254 102-10 32.20 145 65 DN 20

DMH 286 111-50 35.10 725 88 DN 20

DMH 254 136-16 43.00 232 90 DN 20

DMH 254 143-10 45.40 145 90 DN 20

DMH 254 166-16 52.80 232 110 DN 20

DMH 286 170-50 53.90 725 134 DN 20

DMH 254 175-10 55.40 145 110 DN 20

DMX 226 and DMH available in Duplex configuration for double capacity.


GRUNDFOS DOSING Metering PumpsDMH (Alldos line) Capacity Overview

18

DDI 209 DDI 222 DMI B DMI A (AR) DMX B DMX ARCapacity control

Stroke frequency control • •Stroke speed control • •Stroke length adjustments • • • •Control panel

Capacity setting in l/hr, ml/hr, or GPH • •Red light for stopped pump and error signals • • •Green light when pump is running • • • •Yellow light to indicate pump remotely paused • •Control panel lock • • •Start/Stop button • • •Front mounted interface • • •Side mounted interface •Top mounted interface • •Wall mounted interface •Operating modes

Manual control • • • • • •Pulse control • • • •Analog 0/4-20 mA control • • •Pulse based batch control • • •Internal timer based batch control • •Functions/Options

Alarm outputs (variant AR) • • • •Dosing controller output •Flow monitor (variant AF) • •Leak detection (optional diaphragm breakage indication) • • • •Dual level control (requires level controller, available on select sizes) • • • •Auto degassing pump head (Optional Plus 3 system) • • •Anti-cavitation/slow mode (reduced suction speed) • •Pulse memory (saves up to 65,000 pulses) • • •Calibration function • •Resettable dosing quantity counter • •Hours of operation counter • • •Remote on/off • • • •0/4-20 mA output • • •Fieldbus communication (variant AP - Profibus) • •Available in Duplex versions (Check sizing chart for availability) • •



19

DMH B DMH ARCapacity control

Stroke frequency control •Stroke speed control

Stroke length adjustments • •Control panel

Capacity setting in l/hr, ml/hr, or GPH

Red light for stopped pump and error signals •Green light when pump is running •Yellow light to indicate pump remotely paused

Control panel lock •Start/Stop button •Front mounted interface •Side mounted interface

Top mounted interface

Wall mounted interface •Operating modes

Manual control • •Pulse control •Analog 0/4-20 mA control •Pulse based batch control •Internal timer based batch control

Functions/Options

Alarm outputs (variant AR) •Dosing controller output •Flow monitor (variant AF)

Leak detection (optional diaphragm breakage indication) • •Dual level control (requires level controller, available on select sizes) •Auto degassing pump head (Optional Plus 3 system)Anti-cavitation/slow mode (reduced suction speed)

Pulse memory (saves up to 65,000 pulses) •Calibration function

Resettable dosing quantity counter

Hours of operation counter •Remote on/off •0/4-20 mA output •Fieldbus communication (variant AP - Profibus)

Available in Duplex versions (Check sizing chart for availability) • •



20

Alldos DDI-AR GPH PSI

209-0.4D 0.4-10 0.1 145209-2.2D 2.2-16 0.58 232209-2.5D 2.5-10 0.66 145209-5.5D 5.5-10 1.45 145209-13.8D 13.8-4 3.64 58209-20D 20-3 5.28 43.5222-60D 60-10 15.8 145222-150D 150-4 39.6 58

Alldos DDI-P3 GPH PSI

209-0.4D 0.4-10 0.1 145209-2.2D 2.2-16 0.5 232209-2.5D 2.5-10 0.58 145209-5.5D 5.5-10 1.29 145


DDI (TrueDos 209, 222)

Standard - TrueDos D

Plus3

GRUNDFOS DOSING Metering PumpsDDI - ALLDOS TrueDos 209/222 Overview

21

Type key

Example: DDI 20-3 AR -PVC / V / G - F - 3 1 SS BSize Plug typeControl variant B US plug

AR Standard X No plug

AF AR + flow monitor Inlet/Discharge connectionsAP AR + Profibus 3 4/6 mm (1/4") tubing

APF AP + flow monitor A3 3/4" female NPT

Pump head A7 3/4" male NPT

PP Polypropylene A9 1/2" male NPT

PV PVDF C4 1/8" x 1/4" tubingPVC Polyvinyl chloride R 1/4" x 3/8" tubingSS 316 stainless steel S 3/8" x 1/2" tubing

PP-P3 PP + Plus 3 auto degassing head V 1/4" female NPT

PVC-P3 PVC + Plus3 auto degassing head Valve typePP-L PP + leak detection 1 Standard valves

PV-L PV + leak detection Spring loaded - 0.7 psi inlet and

PVC-L PVC + leak detection discharge opening pressure

SS-L 316 SS + leak detection Spring-loaded - 0.7 inlet, 11.6 psi

Gasket material discharge opening pressure

E EPDM 4 Spring-loaded discharge

V FKM 5 SS valves for abrasive fluids

T PTFE 6 HV, spring-loaded discharge

Valve ball material Supply voltageC Ceramic 3 1ø 100-240 V, 50/60 Hz

G Glass 1 24 V DC

T PTFE Control panel positionSS Stainless steel F Front mounted

T Top mounted

S Side mounted

3

2


GRUNDFOS DOSING Metering PumpsDDI - ALLDOS TrueDos 209/222

22

Plus 3 system:

Code change

PVC or PP heads (0.4-10, 2.5-10, 5.5-10) PVC-P3/PP-P3 $560.00

PVC or PP heads high pressure (2.2-16) PVC-P3/PP-P3 $655.00

Control variant:

AR TrueDos 209D or 222D $0.00

AF AR with flow monitor $693.00

AP AR with Profibus $1,115.00

APF AR with Profibus and flow monitor (Cable part # 96693735 required) $1,806.00

Leak detection - Diaphragm breakage indication (DBI)

(head type)-L PVC-L, PP-L, PV-L, SS-L $522.00

Control panel position:

Sizes 0.4-10 to 20-3

Sizes 60-10 to 150-4 Call factory

T Top Sizes 0.4-10 to 20-3 $29.60

S Side Sizes 60-10 to 150-4 $0.00

Motor voltage:

3 1x100-240V, 50/60 Hz

I 24 VDC variant AR only, sizes 0.4-10 to 20-3 $21.10

Valve type:

1 Standard valves $0.00

2 Spring loaded - 0.7 psi inlet and discharge opening pressure $45.00

3* Spring-loaded - 0.7 inlet, 11.6 psi discharge opening pressure $45.00

4* Spring-loaded, discharge only - 11.6 psi opening pressure $45.00

5** SS valves for abrasive fluids Call factory

6** HV, spring-loaded discharge - 11.6 psi opening pressure, SS balls $98.20

* Available with sizes 0.4-10 to 20-3

** Available with sizes 60-10 to 150-4; HV = High viscosity

Valve changes:

Valve size Code change DN4 DN8 DN20

Stainless steel valve balls in PVC or PP pumps Ball code SS $22.20 $22.20 $22.20

Ceramic balls in PVC or PP pumps Ball code C $22.20 $79.20 $177.00

PTFE valve balls in PVC, PP, or PVDF valve cartridge Ball code T $47.50 $47.50 $47.50

PTFE coated gasket in PVC, PP, or SS valve cartridge Gasket code T $239.00 $210.00 $210.00

Connections:

3 4/6 mm (1/4") tubing PP/PVC, sizes 0.4-10 to 5.5-10 $0.00

A9 1/2" male NPT PVC/PVDF/SS, sizes 13.8-4 to 150-4 $0.00

B6 4/6 mm piping (PVDF only) $0.00

C4 1/8" x 1/4" tubing (high pressure - heavy wall) Sold as accessory

R 1/4" x 3/8" tubing $0.00

S 3/8" x 1/2" tubing PVC, sizes 13.8-4 to 150-4 $0.00

V 1/4" female NPT, SS SS, sizes 0.4-10 to 60-10 $0.00

A3 3/4" female NPT SS, sizes 60-10 with valve type 6, and 150-4 $0.00

Plug type:

X No plug $0.00

B USA, North America $0.00

NOTE: Adders are approximate values

Non-Standard ModelsAdders to List Price [US$]

F Front



23

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


DischargeControl Position


List Price[$ USD]

We

igh

t-lbs

AB

C

DE

LIV

ER

Y

DDI 0.4-10, 0.1 gph up to 145 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm Front DDI 0.4-10 AR-PVC/V/G-F-3133B 91834949 1175.00 6.2 A ▲

EPDM Ceramic 4/6 mm Front DDI 0,4-10 AR-PVC/E/C-F-3133B 96713621 1182.00 6.2 A ▲Viton Glass 4/6 mm Front DDI 0,4-10 AR-PP/V/G-F-3133B 96713623 1244.00 6.2 C

EPDM Ceramic 4/6 mm Front DDI 0,4-10 AR-PP/E/C-F-3133B 95711885 1252.00 6.2 CPVDF PTFE Ceramic 4/6 mm piping Front DDI 0,4-10 AR-PV/T/C-F-31B6B6B 91834951 1460.00 6.2 C

SS Viton SS 1/2" MNPT Front DDI 0,4-10 AR-SS/V/SS-F-31A9A9B 91834952 2198.00 6.2 C

DDI 2.2-16, 0.58 gph up to 232 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm Front DDI 2,2-16 AR-PVC/V/G-F-31B13B 91834965 1386.00 6.2 C

EPDM Ceramic 4/6 mm Front DDI 2,2-16 AR-PVC/E/C-F-31B13B 91836458 1401.00 6.2 CViton Glass 4/6 mm Front DDI 2,2-16 AR-PP/V/G-F-31B13B 91834965 1386.00 6.2 C

EPDM Ceramic 4/6 mm Front DDI 2,2-16 AR-PP/E/C-F-31B13B 95713530 1401.00 6.2 CSS Viton Ceramic 1/2" MNPT Front DDI 2,2-16 AR-SS/V/SS-F-31A9A9B 91834966 2200.00 6.2 C

DDI 2.5-10, 0.66 gph up to 145 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm Front DDI 2,5-10 AR-PVC/V/G-F-3133B 95712262 1157.00 6.2 A ▲


EPDM Ceramic 4/6 mm Front DDI 2,5-10 AR-PP/E/C-F-3133B 95709130 1239.00 6.2 CPVDF PTFE Ceramic 4/6 mm piping Front DDI 2,5-10 AR-PV/T/C-F-31B6B6B 91834976 1446.00 6.2 C


DDI 5.5-10, 1.45 gph up to 145 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm Front DDI 5,5-10 AR-PVC/V/G-F-3133B 91834996 1387.00 6.2 A ▲


EPDM Ceramic 4/6 mm Front DDI 5,5-10 AR-PP/E/C-F-3133B 95705639 1404.00 6.2 CPVDF PTFE Ceramic 4/6 mm piping Front DDI 5,5-10 AR-PV/T/C-F-31B6B6B 91834999 1675.00 6.2 A ▲


DDI 13.8-4, 3.64 gph up to 58 psi Viton Glass 3/8x1/2" Front DDI 13,8-4 AR-PVC/V/G-F-31SSB 91834958 1614.00 6.2 A ▲

EPDM Ceramic 3/8x1/2" Front DDI 13,8-4 AR-PVC/E/C-F-31SSB 95713521 1637.00 6.2 A ▲Viton Glass 3/8x1/2" Front DDI 13,8-4 AR-PP/V/G-F-31SSB 91836735 1556.00 6.2 C

EPDM Ceramic 3/8x1/2" Front DDI 13,8-4 AR-PP/E/C-F-31SSB 95713522 1637.00 6.2 CPVDF PTFE Ceramic 1/2" MNPT Front DDI 13,4- AR-PV/T/C-F-31A9A9B 95713514 1807.00 6.2 C


DDI 20-3, 5.28 gph up to 43.5 psi Viton Glass 3/8x1/2" Front DDI 20-3 AR-PVC/V/G-F-31SSB 91834988 1612.00 6.2 A ▲

EPDM Ceramic 3/8x1/2" Front DDI 20-3 AR-PVC/E/C-F-31SSB 91836616 1671.00 6.2 A ▲Viton Glass 3/8x1/2" Front DDI 20-3 AR-PP/V/G-F-31SSB 95713523 1612.00 6.2 C

EPDM Ceramic 3/8x1/2" Front DDI 20-3 AR-PP/E/C-F-31SSB 95713524 1671.00 6.2 CPVDF PTFE Ceramic 1/2" MNPT Front DDI 20-3 AR-PV/T/C-F-31A9A9B 95713525 1807.00 6.2 C

SS Viton SS 1/2" MNPT Front DDI 20-3 AR-SS/V/SS-F-31A9A9B 91834992 2611.00 6.2 C

DDI 60-10, 15.8 gph up to 145 psi Viton Glass 3/8x1/2" Side DDI 60-10 AR-PVC/T/T-S-31SSB 91835101 3237.00 11.0 A ▲

EPDM Ceramic 3/8x1/2" Side DDI 60-10 AR-PVC/E/C-S-31SSB 95709093 3162.00 11.0 A ▲Viton Glass 3/8x1/2" Side DDI 60-10 AR-PP/V/G-S-31SSB 96717375 3283.00 11.0 C

EPDM Ceramic 3/8x1/2" Side DDI 60-10 AR-PP/E/C-S-31SSB 95713526 3147.00 11.0 CPVDF PTFE Ceramic 1/2" MNPT Side DDI 60-10 AR-PV/T/C-S-31A9A9B 95717385 3679.00 11.0 C

SS Viton SS 1/2" MNPT Side DDI 60-10 AR-SS/V/SS-S-31A9A9B 91835105 3884.00 11.0 C

DDI 150-4, 39.7 gph up to 58 psi Viton Glass 3/4" NPT Side DDI 150-4 AR-PVC/T/T-S-31A7A7B 96717267 3528.00 16.5 A ▲

EPDM SS 3/4" NPT Side DDI 150-4 AR-PVC/E/SS-S-31A7A7B 91835098 3515.00 16.5 A ▲Viton Glass 3/4" NPT Side DDI 150-4 AR-PP/V/G-S-31A7A7B 96717244 3776.00 16.5 C

EPDM SS 3/4" NPT Side DDI 150-4 AR-PP/E/SS-S-31A7A7B 96717245 3761.00 16.5 CPVDF PTFE Ceramic 3/4" NPT Side DDI 150-4 AR-PV/T/C-S-31A7A7B 95713527 3940.00 16.5 C

SS Viton SS 3/4" FNPT Side DDI 150-4 AR-SS/V/SS-S-31A3A3B 91835100 4280.00 16.5 C

PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery

Delivery codes apply to quantities of 5 or less. Call for delivery time on higher quantity orders.▲Delivery within 5 business days

AR

PVC

PP

PP

PVC

PVC

PP

PP

PP

AR

PVC

AR

PVC

PP

AR


AR

AR

AR

PVC

PP

AR

PVC

PP

PVC


24

Alldos DMI GPH PSI P3 - Plus 3

208-0.3 0.3-10 0.095 1450.08 gph, 43.5 psi; 0.05 gph, 145 psi

208-1.0 1.0-10 0.32 1450.42 gph, 43.5 psi; 0.21 gph, 145 psi

208-1.6 1.6-10 0.51 1450.71 gph, 43.5 psi; 0.55 gph, 145 psi

208-3.0 3.0-10 0.92 101.50.98 gph, 43.5 psi; 0.87 gph, 102 psi

208-4.0 4.0-8 1.27 871.43 gph, 43.5 psi; 1.27 gph, 87 psi

208-5.0 5.0-6 1.58 72.5 N/A

208-6.0 6.0-8 1.9 871.85 gph, 43.5 psi; 1.65 gph, 87 psi

208-9.0 9.0-6 2.9 79.8 N/A208-14 14-4 4.44 43.5 N/A208-18 18-3.5 5.7 43.5 N/A

High Pressure

208-0.8 0.8-16 0.25 2320.42 gph, 145 psi; 0.13 gph, 232 psi

208-1.1 1.1-16 0.35 2320.71 gph, 145 psi; 0.44 gph, 232 psi

208-3.6 3.6-16 1.14 1891.43 gph, 145 psi; 1.11 gph, 232 psi

Model Size Head typesVariant A, AR, B


GRUNDFOS DOSING Metering PumpsDMI - ALLDOS Primus 208 Capacity Overview

25

Type key

Example: DMI 9-6 AR -PVC / V / G - T - H 1 SS BSize Plug typeControl variant B US plug

B Manual control X No plug

A Manual/Pulse controlAR A + alarm output Inlet/Discharge connections

Pump head 3 4/6 mm (1/4") tubingPP Polypropylene A9 1/2" male NPT

PV PVDF B1 6/12 mm tubing/ cementing d. 12PVC Polyvinyl chloride B6 4/6 mm pipingSS 316 stainless steel C4 1/8" x 1/4" tubing

PP-P3 PP + Plus 3 auto degassing head R 1/4" x 3/8" tubingPVC-P3 PVC + Plus3 auto degassing head S 3/8" x 1/2" tubing

Gasket material V 1/4" female NPT

E EPDMV FKM Valve typeT PTFE 1 Standard valves

Valve ball material Spring loaded - 0.7 psi inlet and

C Ceramic discharge opening pressure

G Glass Spring-loaded - 0.7 inlet, 11.6 psi

T PTFE discharge opening pressure

SS Stainless steel 4 Spring-loaded discharge

Supply voltageH 1ø 120 V, 50/60 Hz

Control panel positionT Top mounted

X No control panel

2

3


GRUNDFOS DOSING Metering PumpsDMI - ALLDOS Primus 208

26

Plus 3 system:Code change

PVC or PP heads PVC-P3/PP-P3 237.00 Auto deaeration:

Code changePVC heads PVC-AD 237.00

Control variants:B E00, Manual stroke length adjustment, 10-100% 0.00A E20, Pulse control, remote on/off 222.00

AR E22, Pulse control, remote on/off, alarm output 249.00 Control position:

X No control panel, (variant B only) 0.00T Top-mounted (variants A and AR) 0.00

Motor voltage:H 1ø120V 50/60 Hz 0.00

Valve type:1 Standard valves 0.002 Spring loaded - 0.7 psi inlet and discharge opening pressure 45.003 Spring-loaded - 0.7 inlet, 11.6 psi discharge opening pressure 45.004 Spring-loaded, discharge only - 11.6 psi opening pressure 45.00

Valve changes:Valve size Code change DN4 DN8Stainless steel valve balls in PVC or PP pumps Ball code SS 22.20 22.20Ceramic balls in PVC or PP pumps Ball code C 22.20 79.20PTFE valve balls in PVC, PP, or PVDF valve cartridge Ball code T 47.50 47.50PTFE coated gasket in PVC, PP, or SS valve cartridge Gasket code T 239.00 210.00

Connections:3 4/6 mm (1/4") tubing (Dimensions of tubing IDxOD) 0.00

B1 6/12 mm tubing / cementing d.12 0.00B6 4/6mm piping (PVDF only) 0.00A9 1/2" male NPT 0.00C4 1/8" x 1/4" tubing 0.00R 1/4" x 3/8" tubing 0.00S 3/8" x 1/2" tubing 0.00V 1/4" female NPT 0.00

Plug type: 0.00B USA, North America 0.00


GRUNDFOS PUMPS PRICE LISTEFFECTIVE DATE: MARCH 1, 2009



27

Control VAiant

Pump Head

Material

Gasket Material

Valve Ball Material


DischAge[in]

Control Position


List Price[$ USD]

Weig

ht-lb

s

AB

C

Delivery

DMI 0.3-10, 0.095 gph up to 145 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm - DMI 0.3-10 B-PVC/V/G-X-H133B 91834816 573.00 6.2 C

EPDM Ceramic 4/6 mm - DMI 0.3-10 B-PVC/E/C-X-H133B 91834822 591.00 6.2 CPVDF PTFE Ceramic 4/6 mm piping - DMI 0.3-10 B-PV/T/C-X-H1B6B6B 96711315 918.00 6.2 C

SS Viton SS 1/2" MNPT - DMI 0.3-10 B-SS/V/SS-X-H1A9A9B 91836709 1178.00 6.2 CViton Glass 4/6 mm Top DMI 0.3-10 A-PVC/V/G-T-H133B 91834813 795.00 6.2 C

EPDM Ceramic 4/6 mm Top DMI 0,3-10 A-PVC/E/C-T-H133B 95713662 813.00 6.2 BPVDF PTFE Ceramic 4/6 mm piping Top DMI 0.3-10 A-PV/T/C-T-H1B6B6B 95713668 1141.00 6.2 C

SS Viton SS 1/2" MNPT Top DMI 0.3-10 A-SS/V/SS-T-H1A9A9B 95713679 1400.00 6.2 C

DMI 0.8 - 16, 0.25 gph up to 232 psi (Reduced capacity with Plus 3 heads)Viton Glass 1/8"x1/4" - DMI 0.8-16 B-PVC/V/G-X-H1C4C4B 95702535 695.00 6.2 C

EPDM Ceramic 1/8"x1/4" - DMI 0.8-16 B-PVC/E/C-X-H1C4C4B 95713682 683.00 6.2 CSS Viton SS 1/2" MNPT - DMI 0.8-16 B-SS/V/SS-X-H1A9A9B 95713687 1300.00 6.2 C

Viton Glass 1/8"x1/4" Top DMI 0.8-16 A-PVC/V/G-T-H1C4C4B 95702530 917.00 6.2 CEPDM Ceramic 1/8"x1/4" Top DMI 0.8-16 A-PVC/E/C-T-H1C4C4B 95713663 1095.00 6.2 C


DMI 1.0-10, 0.32 gph up to 145 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm - DMI 1.0-10 B-PVC/V/G-X-H133B 91834830 573.00 6.2 A ▲


SS Viton SS 1/2" MNPT Top DMI 1.0-10 B-SS/V/SS-X-H1A9A9B 96711567 1078.00 6.2 CViton Glass 4/6 mm Top DMI 1.0-10 A-PVC/V/G-T-H133B 91834833 795.00 6.2 A ▲

EPDM Ceramic 4/6 mm Top DMI 1.0-10 A-PVC/E/C-T-H133B 91836717 812.00 6.2 CPVDF PTFE Ceramic 4/6 mm piping Top DMI 1.0-10 A-PV/T/C-T-H1B6B6B 96711552 1140.00 6.2 C


DMI 1.1-16, 0.35 gph up to 232 psi (Reduced capacity with Plus 3 heads)Viton Glass 1/8"x1/4" - DMI 1.1-16 B-PVC/V/G-X-H1C4C4B 95702534 695.00 6.2 A ▲

EPDM Ceramic 1/8"x1/4" - DMI 1.1-16 B-PVC/E/C-X-H1C4C4B 95713683 683.00 6.2 A ▲SS Viton SS 1/2" MNPT - DMI 1.1-16 B-SS/V/SS-X-H1A9A9B 96711756 1290.00 6.2 C



DMI 1.6-10, 0.51 gph up to 145 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm - DMI 1.6-10 B-PVC/V/G-X-H133B 91834856 573.00 6.2 A ▲

EPDM Ceramic 4/6 mm - DMI 1.6-10 B-PVC/E/C-X-H133B 96711969 590.00 6.2 A ▲PVDF PTFE Ceramic 4/6 mm piping - DMI 1.6-10 B-PV/T/C-X-H1B6B6B 91834860 919.00 6.2 C

SS Viton SS 1/2" MNPT - DMI 1.6-10 B-SS/V/SS-X-H1A9A9B 96711971 1170.00 6.2 CViton Glass 4/6 mm Top DMI 1.6-10 A-PVC/V/G-T-H133B 91834853 795.00 6.2 A ▲

EPDM Ceramic 4/6 mm Top DMI 1.6-10 A-PVC/E/C-T-H133B 91834857 813.00 6.2 A ▲PVDF PTFE Ceramic 4/6 mm piping Top DMI 1.6-10 A-PV/T/C-T-H1B6B6B 95710336 1140.00 6.2 C


DMI 3.0-10, 0.92 gph up to 101.5 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm - DMI 3.0-10 B-PVC/V/G-X-H133B 91834883 573.00 6.2 B

EPDM Ceramic 4/6 mm - DMI 3.0-10 B-PVC/E/C-X-H133B 91836719 590.00 6.2 BPVDF PTFE Ceramic 4/6 mm piping - DMI 3.0-10 B-PV/T/C-X-H1B6B6B 91834897 919.00 6.2 B

SS Viton SS 1/2" MNPT - DMI 3.0-10 B-SS/V/SS-X-H1A9A9B 91836713 1178.00 6.2 CViton Glass 4/6 mm Top DMI 3.0-10 A-PVC/V/G-T-H133B 91834885 795.00 6.2 B

EPDM Ceramic 4/6 mm Top DMI 3.0-10 A-PVC/E/C-T-H133B 91834892 813.00 6.2 BPVDF PTFE Ceramic 4/6 mm piping Top DMI 3.0-10 A-PV/T/C-T-H1B6B6B 96712543 1140.00 6.2 C


PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery▲Delivery within 5 business days

APVC

BPVC

A

PVC

PVC

APVC

PVC

APVC

B

BPVC


APVC

BPVC

BPVC

APVC

B


28

Control VAiant

Pump Head

Material

Gasket Material

Valve Ball Material


DischAge[in]

Control Position


List Price[$ USD]

Weig

ht-lb

s

AB

C

Delivery

DMI 3.6-16, 1.14 gph up to 189 psi (Reduced capacity with Plus 3 heads)Viton Glass 1/8"x1/4" - DMI 3.6-16 B-PVC/V/G-X-H1C4C4B 95702533 843.00 6.2 C

EPDM Ceramic 1/8"x1/4" - DMI 3.6-16 B-PVC/E/C-X-H1C4C4B 95713684 860.00 6.2 CSS Viton SS 1/2" MNPT - DMI 3.6-16 B-SS/V/SS-X-H1A9A9B 95711961 1237.00 6.2 C



DMI 4.0- 8, 1.27 gph up to 87 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm - DMI 4.0-8 B-PVC/V/G-X-H133B 91834915 573.00 6.2 A ▲

EPDM Ceramic 4/6 mm - DMI 4.0-8 B-PVC/E/C-X-H133B 91836722 590.00 6.2 A ▲PVDF PTFE Ceramic 4/6 mm piping - DMI 4.0-8 B-PV/T/C-X-H1B6B6B 96712950 918.00 6.2 C


EPDM Ceramic 4/6 mm Top DMI 4.0-8 A-PVC/E/C-T-H133B 91836723 812.00 6.2 A ▲PVDF PTFE Ceramic 4/6 mm piping Top DMI 4.0-8 A-PV/T/C-T-H1B6B6B 96712939 1140.00 6.2 C


DMI 5.0 - 6, 1.58 gph up to 72.5 psi Viton Glass 4/6 mm - DMI 5.0-6 B-PVC/V/G-X-H133B 91834922 573.00 6.2 B

EPDM Ceramic 4/6 mm - DMI 5.0-6 B-PVC/E/C-X-H133B 96713094 632.00 6.2 BPVDF PTFE Ceramic 4/6 mm piping - DMI 5.0-6 B-PV/T/C-X-H1B6B6B 91834930 919.00 6.2 C

SS Viton SS 1/2" MNPT - DMI 5.0-6 B-SS/V/SS-X-H1A9A9B 96713110 1469.00 6.2 CViton Glass 4/6 mm Top DMI 5.0-6 A-PVC/V/G-T-H133B 91834924 795.00 6.2 B

EPDM Ceramic 4/6 mm Top DMI 5.0-6 A-PVC/E/C-T-H133B 91836435 799.00 6.2 BPVDF PTFE Ceramic 4/6 mm piping Top DMI 5.0-6 A-PV/T/C-T-H1B6B6B 91834929 1141.00 6.2 C


DMI 6.0 - 8, 1.9 gph up to 87 psi (Reduced capacity with Plus 3 heads)Viton Glass 4/6 mm - DMI 6.0-8 B-PVC/V/G-X-H133B 91834932 744.00 6.2 A ▲



EPDM Ceramic 4/6 mm Top DMI 6.0-8 A-PVC/E/C-T-H133B 96713311 1054.00 6.2 CPVDF PTFE Ceramic 4/6 mm piping Top DMI 6.0-8 A-PV/T/C-T-H1B6B6B 96713310 1338.00 6.2 C


DMI 9.0 - 6, 2.9 gph up to 79.8 psi Viton Glass 3/8 x 1/2" - DMI 9.0-6 B-PVC/V/G-X-H1SSB 91834944 915.00 6.2 B

EPDM Ceramic 3/8 x 1/2" - DMI 9.0-6 B-PVC/E/C-X-H1SSB 95710967 933.00 6.2 BPVDF PTFE Ceramic 1/2" MNPT - DMI 9.0-6 B-PV/T/C-X-H1A9A9B 91836732 1262.00 6.2 B

SS Viton SS 1/2" MNPT - DMI 9.0-6 B-SS/V/SS-X-H1A9A9B 96713539 1530.00 6.2 CViton Glass 3/8 x 1/2" Top DMI 9.0-6 A-PVC/V/G-T-H1SSB 91834946 1138.00 6.2 B

EPDM Ceramic 3/8 x 1/2" Top DMI 9.0-6 A-PVC/E/C-T-H1SSB 95710968 1155.00 6.2 B

PVDF PTFE Ceramic 1/2" MNPT Top DMI 9.0-6 A-PV/T/C-T-H1A9A9B 95710335 1483.00 6.2 CSS Viton SS 1/2" MNPT Top DMI 9.0-6 A-SS/V/SS-T-H1A9A9B 96713539 1752.00 6.2 C

DMI 14-4, 4.44 gph up to 43.5 psi Viton Glass 3/8 x 1/2" - DMI 14-4 B-PVC/V/G-X-H1SSB 91834869 915.00 6.2 C

EPDM Ceramic 3/8 x 1/2" - DMI 14-4 B-PVC/E/C-X-H1SSB 95713685 936.00 6.2 BPVDF PTFE PTFE 1/2" MNPT - DMI 14-4 B-PV/T/T-X-H1A9A9B 96712200 1262.00 6.2 C

SS Viton SS 1/2" MNPT - DMI 14-4 B-SS/V/SS-X-H1A9A9B 96712187 1620.00 6.2 CViton Glass 3/8 x 1/2" Top DMI 14-4 A-PVC/V/G-T-H1SSB 91834871 1138.00 6.2 C

EPDM Ceramic 3/8 x 1/2" Top DMI 14-4 A-PVC/E/C-T-H1SSB 95713666 1237.00 6.2 BPVDF PTFE Ceramic 1/2" MNPT Top DMI 14-4 A-PV/T/C-T-H1A9A9B 95713669 1484.00 6.2 C

SS Viton SS 1/2" MNPT Top DMI 14-4 A-SS/V/SS-T-H1A9A9B 95713672 1520.00 6.2 C

DMI 18-3.5, 5.7 gph up to 43.5 psi Viton Glass 3/8 x 1/2" - DMI 18-3,5 B-PVC/V/G-X-H1SSB 91834879 957.00 6.2 C

EPDM Ceramic 3/8 x 1/2" - DMI 18-3.5 B-PVC/E/C-X-H1SSB 91836702 974.00 6.2 CPVDF PTFE Ceramic 1/2" MNPT - DMI 18-3.5 B-PV/T/C-X-H1A9A9B 95713686 1280.00 6.2 C

SS Viton SS 1/2" MNPT - DMI 18-3.5 B-SS/V/SS-X-H1A9A9B 95713688 1579.00 6.2 CViton Glass 3/8 x 1/2" Top DMI 18-3,5 A-PVC/V/G-T-H1SSB 91834880 1180.00 6.2 C

EPDM Ceramic 3/8 x 1/2" Top DMI 18-3.5 A-PVC/E/C-T-H1SSB 95713667 1196.00 6.2 BPVDF PTFE Ceramic 1/2" MNPT Top DMI 18-3.5 A-PV/T/C-T-H1A9A9B 95713670 1521.00 6.2 C

SS Viton SS 1/2" MNPT Top DMI 18-3.5 A-SS/V/SS-T-H1A9A9B 95713671 1705.00 6.2 C

▲Delivery within 5 business days

BPVC

APVC

PVC

BPVC

APVC

PVC


B

PVC

APVC

B

BPVC

A

B

PVC

APVC

APVC

BPVC

APVC


29

Alldos DMX GPH PSI str./min. Head size221-4 4-10 1.3 145 35 1221-7 7-10 2.1 145 35 2

221-7.2 7.2-16 2.3 232 75 1221-8 8-10 2.6 145 75 1221-9 9-10 2.9 145 35 3221-12 12-10 3.7 145 35 4

221-13.7 13.7-16 4 232 144 1221-14 14-10 4.5 145 75 2221-16 16-10 5 145 144 1221-17 17-4 5.3 58 35 5221-18 18-10 5.8 145 75 3221-25 25-3 7.9 43.5 35 6221-26 26-10 8.2 145 75 4221-27 27-10 8.4 145 144 2221-35 35-10 11 145 144 3221-39 39-4 12 58 75 5221-50 50-10 16 116 144 4221-60 60-3 19 43.5 75 6221-75 75-3.5 24 50.8 144 5221-115 115-3 36 36.3 144 6

Alldos DMX GPH (Duplex x 2) PSI str./min. Head Size226-52M (/2M) 52-8 16.4 116 75.6 1226-67L (/2L) 67-10 21.1 145 68.4 1226-82M (2M) 82-5 25.9 72 75.6 2226-95L (/2L) 95-8 30 116 68.4 2

226-100M (/2M) 100-8 31.7 116 144 1226-130M (/2M) 130-3 41.2 43.5 75.6 3226-132L (/2L) 132-10 41.7 116 144 1226-152L (/2L) 152-6 48 87 68.4 3226-160M (/2M) 160-5 50.7 72 144 2226-199L (/2L) 199-8 63.1 116 144 2226-249L (/2L) 249-3 78.9 43.5 68.4 4226-255M (/2M) 255-3 80.8 43.5 144 3226-321L (/2L) 321-6 102 58 144 3226-525L (/2L) 525-3 166.3 43.5 144 4

221

226


GRUNDFOS DOSING Metering PumpsDMX - ALLDOS Primus 221

30

Type key

Example: DMX 27-10 AR -PVC / V / G - F - H 1 SS BSize Plug typeControl variant B US plug

B Manual control X No plug

AR External control (Etron Profi) Inlet/Discharge connectionsAT5 Servo motor, 115V 4-20 mA control A3 3/4" female NPT

Pump head A4 1 1/4" female NPT


PV PVDF A8 1 1/4" male NPT

PVC Polyvinyl chloride A9 1/2" male NPT

SS 316 stainless steel S 3/8" x 1/2" tubing

Y Hastelloy C V 1/4" female NPT

PV-R PVDF + integrated relief valve Valve typePVC-R PVC + integrated relief valve 1 Standard valve

PP-L PP + leak detection 3 Spring-loaded

PV-L PV + leak detection 4 Spring-loaded discharge

PVC-L PVC + leak detection 5 Valves for abrasive media

SS-L 316 SS + leak detection Supply voltageY-L Hastelloy C + leak detection G 1ø 220-240 V, 50/60 Hz

PV-RL PVDF + integrated relief valve + leak detection H 1ø 110-120 V, 50/60 Hz

PVC-RL PVC + integrated relief valve + leak detection 230/400V50/60HZ

Gasket material 440/480V 60HZ

E EPDM Without motor,

V FKM Nema flangeT PTFE Control panel position

Valve ball material S Side, 90° from pump head

C Ceramic F Front, 180° from pump head

G Glass W Wall mounted

T PTFE X No control panel

SS Stainless steel

Y Hastelloy C

F

E



31

Integral pressure relief valve (PRV): PVC-R, PV-R $182.00

(Not available with PVC/E/SS on sizes 17-4, 25-3, 39-4, 60-3, 75-3.5, and 115-3)

Leak detection - Diaphragm breakage indciation (DBI): PVC-L, PV-L, PP-L, SS-L $538.00

Both PRV and DBI : PVC-RL, PV-RL $634.00

Control Variant:

B Manual control via stroke length adjustments $0.00

AR External control (Etron Profi) $770.00

AT5 Servo motor, 1ø115V 50/60 Hz, 4-20 mA control* $2,097.00

Control position:

X no control panel $0.00

S Side, 90° from pump head (AR only) $0.00

F Front - 180° from pump head (AR only, non-standard) $0.00

W Wall mounted (AR only) $184.00

Motor options: (all AR pumps are shipped with single phase motors)

E 230/400V50/60HZ 440/480V 60HZ $0.00

F NEMA 42C Flange Call factory

G 1ø 220-240 V, 50/60 Hz $0.00

H 1ø 110-120 V, 50/60 Hz $0.00

Valve type:

1 Standard valves $0.00

3 Spring-loaded - 7.3 psi suction/11.6 psi discharge opening pressure $55.40

4 Spring-loaded - discharge side only $29.30

5 Valves for abrasive media PVDF, SS $41.80

PVC, PP $299.00

6 High viscosity valve - replace DN8 with DN20 size valve on inlet $97.20

SS balls, discharge side springloaded 11.6 psi opening pressure

Valve changes:

Valve size Code Change DN8 DN20 DN32


Ceramic balls in PVC or PP pumps Ball code C $78.40 $175.00 N/A



Connection type:

S 3/8" x 1/2" tubing - PVC, PP $0.00

V 1/4" female NPT, SS $0.00

A9 1/2" male NPT, PVDF, optional on PVC, and SS $0.00

A7 3/4" male NPT, sizes 17-4, 25-3, 39-4, 60-3, 75-3.5, and 115-3, PVC, PVDF $0.00

A3 3/4" female NPT, sizes 17-4, 25-3, 39-4, 60-3, 75-3.5, and 115-3 SS $0.00

Plug type:


Note: Adders are approximate values

*Please use ATØ per the control variant on the type key. Servomotor must be ordered

separate. A list of servomotors is available on the accessories section of this book.




32

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C

DE

LIV

ER

Y

DMX 4.0-10, 1.3 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 4.0-10 B-PVC/T/T-X-H1SSB 91835065 1266.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 4.0-10 B-PVC/E/SS-X-H1SSB 91835068 1203.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Motor Inc. DMX 4.0-10 B-PV/T/T-X-H1A9A9B 96716339 1505.00 11.0 CSS Viton SS 1/2" MNPT Motor Inc. DMX 4.0-10 B-SS/V/SS-X-H1A9A9B 95713763 1809.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 4.0-10 AR-PVC/T/T-S-H1SSB 91835064 2095.00 11.0 BEPDM SS 3/8x1/2" Side DMX 4.0-10 AR-PVC/E/SS-S-H1SSB 95713788 1972.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Side DMX 4.0-10 AR-PV/T/T-S-H1A9A9B 96716328 2415.00 11.0 CSS Viton SS 1/2 MNPT Side DMX 4.0-10 AR-SS/V/SS-S-H1A9A9B 96716227 2579.00 15.4 C

DMX 7.0-10, 2.1 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 7.0-10 B-PVC/T/T-X-H1SSB 91835082 1266.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 7.0-10 B-PVC/E/SS-X-H1SSB 95713809 1203.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Motor Inc. DMX 7.0-10 B-PV/T/T-X-H1A9A9B 95713822 1646.00 11.0 CSS Viton SS 1/2 MNPT Motor Inc. DMX 7.0-10 B-SS/V/SS-X-H1A9A9B 95713764 1728.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 7.0-10 AR-PVC/T/T-S-H1SSB 91835083 2095.00 11.0 BEPDM SS 3/8x1/2" Side DMX 7.0-10 AR-PVC/E/SS-S-H1SSB 96716798 1972.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMX 7.0-10 AR-PV/T/T-S-H1A9A9B 91835084 2416.00 11.0 BSS Viton SS 1/2" MNPT Side DMX 7.0-10 AR-SS/V/SS-S-H1A9A9B 91835086 2579.00 15.4 B

DMX 7.2-16, 2.3 gph up to 232 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 7.2-16 B-PVC/T/T-X-H1SSB 91836422 1329.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 7.2-16 B-PVC/E/SS-X-H1SSB 95713810 1284.00 11.0 C


PTFE PTFE 3/8x1/2" Side DMX 7.2-16 AR-PVC/T/T-S-H1SSB 91835081 2165.00 11.0 BEPDM SS 3/8x1/2" Side DMX 7.2-16 AR-PVC/E/SS-S-H1SSB 95713789 2135.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMX 7.2-16 AR-PV/T/T-S-H1A9A9B 96716778 2419.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 7.2-16 AR-SS/V/SS-S-H1A9A9B 91836603 2756.00 15.4 C

DMX 8.0 -10, 2.6 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 8.0-10 B-PVC/T/T-X-H1SSB 91835092 1266.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 8.0-10 B-PVC/E/SS-X-H1SSB 91836729 1203.00 11.0 C


PTFE PTFE 3/8x1/2" Side DMX 8.0-10 AR-PVC/T/T-S-H1SSB 91835091 2095.00 11.0 CEPDM SS 3/8x1/2" Side DMX 8.0-10 AR-PVC/E/SS-S-H1SSB 95713790 1972.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Side DMX 8.0-10 AR-PV/T/T-S-H1A9A9B 91835093 2414.00 11.0 CSS Viton SS 1/2 MNPT Side DMX 8.0-10 AR-SS/V/SS-S-H1A9A9B 95713785 2849.00 15.4 B

DMX 9.0-10, 2.9 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 9.0-10 B-PVC/T/T-X-H1SSB 91835095 1410.00 11.0 BEPDM SS 3/8x1/2" Motor Inc. DMX 9.0-10 B-PVC/E/SS-X-H1SSB 95713812 1203.00 11.0 B

PVDF PTFE PTFE 3/8x1/2" Motor Inc. DMX 9.0-10 B-PV/T/T-X-H1A9A9B 96717206 1830.00 11.0 CSS Viton SS 1/2 MNPT Motor Inc. DMX 9.0-10 B-SS/V/SS-X-H1SSB 95713766 2080.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 9.0-10 AR-PVC/T/T-S-H1SSB 91835096 2245.00 11.0 BEPDM SS 3/8x1/2" Side DMX 9.0-10 AR-PVC/E/SS-S-H1SSB 95713791 1972.00 11.0 B

PVDF PTFE PTFE 3/8x1/2" Side DMX 9.0-10 AR-PV/T/T-S-H1A9A9B 96717199 2599.00 11.0 CSS Viton SS 1/2 MNPT Side DMX 9.0-10 AR-SS/V/SS-S-H1A9A9B 95713784 2849.00 15.4 C

PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.A delivery code for quantities lower than 5 pumps. *1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery

B

PVC

PVC

ARPVC

BPVC

PVCAR

BPVC


B

ARPVC

PVC

AR

AR

BPVC

PVC


33

Control Variant

Pump Head

Material

Gasket Material

Valve Ball

Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C

DE

LIV

ER

Y

DMX 12-10, 3.7 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 12-10 B-PVC/T/T-X-H1SSB 96715063 1750.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 12-10 B-PVC/E/SS-X-H1SSB 95713813 1756.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Motor Inc. DMX 12-10 B-PV/T/T-X-H1A9A9B 95713824 1826.00 11.0 CSS Viton SS 1/2" MNPT Motor Inc. DMX 12-10 B-SS/V/SS-X-H1A9A9B 96715071 2068.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 12-10 AR-PVC/T/T-S-H1SSB 91835019 2354.00 11.0 BEPDM SS 3/8x1/2" Side DMX 12-10 AR-PVC/E/SS-S-H1SSB 95713792 2525.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Side DMX 12-10 AR-PV/T/T-S-H1A9A9B 91835021 2674.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 12-10 AR-SS/V/SS-S-H1A9A9B 95713783 2837.00 15.4 C

DMX 13.7-16, 4.0 gph up to 232 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 13.7-16 B-PVC/V/C-X-H1SSB 95715130 1474.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 13.7-16 B-PVC/E/SS-X-H1SSB 95713811 1488.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Motor Inc. DMX 13.7-16 B-PV/T/T-X-H1A9A9B 95709820 1707.00 11.0 BSS Viton SS 1/2" MNPT Motor Inc. DMX 13.7-16 B-SS/V/SS-X-H1A9A9B 95713827 2020.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 13.7-16 AR-PVC/T/T-S-H1SSB 91835022 2235.00 11.0 CEPDM SS 3/8x1/2" Side DMX 13.7-16 AR-PVC/E/SS-S-H1SSB 95713799 2257.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMX 13.7-16 AR-PV/T/T-S-H1A9A9B 96715131 2557.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 13.7-16 AR-SS/V/SS-S-H1A9A9B 95713786 2790.00 15.4 C

DMX 14.0-10, 4.5 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 14-10 B-PVC/T/T-X-H1SSB 91835026 1266.00 11.0 BEPDM SS 3/8x1/2" Motor Inc. DMX 14-10 B-PVC/E/SS-X-H1SSB 95713814 1339.00 11.0 B


PTFE PTFE 3/8x1/2" Side DMX 14-10 AR-PVC/T/T-S-H1SSB 91835024 2095.00 11.0 CEPDM SS 3/8x1/2" Side DMX 14-10 AR-PVC/E/SS-S-H1SSB 91835023 2028.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMX 14-10 AR-PV/T/T-S-H1A9A9B 91835028 2416.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 14-10 AR-SS/V/SS-S-H1A9A9B 91835027 2579.00 15.4 B

DMX 16.0-10, 5.0 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 16-10 B-PVC/T/T-X-H1SSB 91835030 1266.00 11.0 CEPDM SS 3/8x1/2" Motor Inc. DMX 16-10 B-PVC/E/SS-X-H1SSB 95713815 1367.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Motor Inc. DMX 16-10 B-PV/T/T-X-H1A9A9B 96715382 1717.00 11.0 CSS Viton SS 1/2 MNPT Motor Inc. DMX 16-10 B-SS/V/SS-X-H1A9A9B 95713768 1809.00 15.4 C


PVDF PTFE PTFE 1/2" MNPT Side DMX 16-10 AR-PV/T/T-S-H1A9A9B 91835031 2416.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 16-10 AR-SS/V/C-S-H1SSB 95713782 2421.00 15.4 C

DMX 17.0-4, 5.3 gph up to 58 psi PTFE PTFE 3/4" MNPT Motor Inc. DMX 17-4 B-PVC/T/T-X-H1A7A7B 95713805 1785.00 16.5 BEPDM SS 3/4" MNPT Motor Inc. DMX 17-4 B-PVC/E/SS-X-H1A7A7B 95713816 1553.00 16.5 B


PTFE PTFE 3/4" MNPT Side DMX 17-4 AR-PVC/T/T-S-H1A7A7B 95713801 2602.00 16.5 BEPDM SS 3/4" MNPT Side DMX 17-4 AR-PVC/E/SS-S-H1A7A7B 95713794 2322.00 16.5 B


PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.A delivery code for quantities lower than 5 pumps. *1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery


PVC

PVC

ARPVC

B

AR

BPVC

ARPVC

BPVC

BPVC

ARPVC

ARPVC

BPVC


34

Control Variant

Pump Head

Material

Gasket Material

Valve Ball

Material


Discharge[in]

Control Position


List Price[$ USD]

De

live

ry /

We

igh

t-lbs

AB

C D

eliv

ery

DMX 18-10, 5.8 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 18-10 B-PVC/T/T-X-H1SSB 91835035 1410.00 11.0 A ▲EPDM SS 3/8x1/2" Motor Inc. DMX 18-10 B-PVC/E/SS-X-H1SSB 95713817 1432.00 11.0 B


PTFE PTFE 3/8x1/2" Side DMX 18-10 AR-PVC/T/T-S-H1SSB 91835036 2245.00 11.0 A ▲EPDM SS 3/8x1/2" Side DMX 18-10 AR-PVC/E/SS-S-H1SSB 95713795 2201.00 11.0 B


DMX 25-3, 7.9 gph up to 43.5 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 25-3 B-PVC/T/T-X-H1SSB 95713806 1913.00 17.6 BEPDM SS 3/4" MNPT Motor Inc. DMX 25-3 B-PVC/E/SS-X-H1A7A7B 95713818 1681.00 17.6 B


PTFE PTFE 3/8x1/2" Side DMX 25-3 AR-PVC/T/T-S-H1SSB 95713821 2682.00 17.6 BEPDM SS 3/4" MNPT Side DMX 25-3 AR-PVC/E/SS-S-H1A7A7B 95713820 2450.00 17.6 B

PVDF PTFE PTFE 1/2" MNPT Side DMX 25-3 AR-PV/T/T-S-H1A7A7B 91835042 2908.00 17.6 BSS Viton SS 1/2" MNPT Side DMX 25-3 AR-SS/V/SS-S-H1A3A3B 95713778 2982.00 22.0 C

DMX 26.0-10, 8.2 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 26-10 B-PVC/T/T-X-H1SSB 91835043 1513.00 11.0 BEPDM SS 3/8x1/2" Motor Inc. DMX 26-10 B-PVC/E/SS-X-H1SSB 91836726 1447.00 11.0 C




DMX 27.0-10, 8.4 gph up to 145 psi PTFE PTFE 3/8x1/2" Motor Inc. DMX 27-10 B-PVC/T/T-X-H1SSB 91835049 1266.00 11.0 A ▲EPDM SS 3/8x1/2" Motor Inc. DMX 27-10 B-PVC/E/SS-X-H1SSB 91836311 1203.00 11.0 B

PVDF PTFE PTFE 1/2" MNPT Motor Inc. DMX 27-10 B-PV/T/T-X-H1A9A9B 91835050 1937.00 11.0 BSS Viton SS 1/2" MNPT Motor Inc. DMX 27-10 B-SS/V/SS-X-H1A9A9B 96715944 2135.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 27-10 AR-PVC/T/T-S-H1SSB 91835048 2095.00 11.0 A ▲EPDM SS 3/8x1/2" Side DMX 27-10 AR-PVC/E/SS-S-H1SSB 96715777 2057.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMX 27-10 AR-PV/T/T-S-H1A9A9B 91835052 2416.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 27-10 AR-SS/V/C-S-H1A9A9B 96715889 2905.00 15.4 C

DMX 35-10, 11 gph up to 145 psi PTFE PTFE 3/8x1/2" Side DMX 35-10 B-PVC/T/T-X-H1SSB 91835056 1410.00 11.0 BEPDM SS 3/8x1/2" Side DMX 35-10 B-PVC/E/SS-X-H1SSB 91836703 1348.00 11.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMX 35-10 B-PV/T/T-X-H1A9A9B 96716113 1717.00 11.0 CSS Viton SS 1/2" MNPT Side DMX 35-10 B-SS/V/SS-X-H1SSB 95713771 1894.00 15.4 C

PTFE PTFE 3/8x1/2" Side DMX 35-10 AR-PVC/T/T-S-H1SSB 91835055 2279.00 11.0 CEPDM SS 3/8x1/2" Side DMX 35-10 AR-PVC/E/SS-S-H1SSB 91835058 2179.00 11.0 C


PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.A delivery code for quantities lower than 5 pumps. *1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery▲Delivery within 5 business days


ARPVC

BPVC

ARPVC

BPVC

BPVC

BPVC

APVC

ARPVC

ARPVC

BPVC


35

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

De

live

ry/

We

igh

t-lbs

AB

C D

eliv

ery

DMX 39.0-4, 12 gph up to 58 psi PTFE PTFE 3/4" MNPT Motor Inc. DMX 39-4 B-PVC/T/T-X-H1A7A7B 95713807 1785.00 16.5 BEPDM SS 3/4" MNPT Motor Inc. DMX 39-4 B-PVC/E/SS-X-H1A7A7B 91835061 1546.00 16.5 B




DMX 50-10, 16 gph up to 116 psi PTFE PTFE 1/2" MNPT Motor Inc. DMX 50-10 B-PVC/T/T-X-H1SSB 91835070 1513.00 11.0 A ▲EPDM SS 1/2" MNPT Motor Inc. DMX 50-10 B-PVC/E/SS-X-H1A9A9B 91836714 1449.00 11.0 C


PTFE PTFE 1/2" MNPT Side DMX 50-10 AR-PVC/T/T-S-H1SSB 91835071 2354.00 11.0 A ▲EPDM SS 1/2" MNPT Side DMX 50-10 AR-PVC/E/SS-S-H1SSB 91835075 2287.00 11.0 B


DMX 60-3, 19 gph up to 43.5 psi PTFE PTFE 3/4" MNPT Motor Inc. DMX 60-3 B-PVC/T/T-X-H1A7A7B 95708383 1989.00 17.6 CEPDM SS 3/4" MNPT Motor Inc. DMX 60-3 B-PVC/E/SS-X-H1A7A7B 95713819 1833.00 17.6 B




DMX 75-3.5, 24 gph up to 50.8 psi PTFE PTFE 3/4" MNPT Motor Inc. DMX 75-3.5 B-PVC/T/T-X-H1A7A7B 95710212 1984.00 16.5 BEPDM SS 3/4" MNPT Motor Inc. DMX 75-3.5 B-PVC/E/SS-X-H1A7A7B 91835090 1857.00 16.5 C

PVDF PTFE PTFE 3/4" MNPT Motor Inc. DMX 75-3.5 B-PV/T/T-X-H1A7A7B 96717002 2200.00 16.5 CSS Viton SS 3/4" FNPT Motor Inc. DMX 75-3.5 B-SS/V/SS-X-H1A3A3B 96717003 2210.00 27.5 C

PTFE PTFE 3/4" MNPT Side DMX 75-3.5 AR-PVC/T/T-S-H1A7A7B 95713803 2627.00 16.5 BEPDM SS 3/4" MNPT Side DMX 75-3.5 AR-PVC/E/SS-S-H1A7A7B 91836313 2627.00 16.5 C

PVDF PTFE PTFE 3/4" MNPT Side DMX 75-3.5 AR-PV/T/T-S-H1A7A7B 91835089 2774.00 16.5 CSS Viton SS 3/4" FNPT Side DMX 75-3.5 AR-SS/V/SS-S-H1A3A3B 95713774 2979.00 27.5 C

DMX 115-3, 36 gph up to 36.3 psi PTFE PTFE 3/4" MNPT Motor Inc. DMX 115-3 B-PVC/T/T-X-H1A7A7B 95713808 1989.00 17.6 BEPDM SS 3/4" MNPT Motor Inc. DMX 115-3 B-PVC/E/SS-X-H1A7A7B 91835013 1857.00 17.6 B

PVDF PTFE PTFE 3/4" MNPT Motor Inc. DMX 115-3 B-PV/T/T-X-H1A7A7B 96714972 2776.00 17.6 CSS Viton SS 3/4" FNPT Motor Inc. DMX 115-3 B-SS/V/SS-X-H1A7A7B 96714973 2716.00 28.7 C

PTFE PTFE 3/4" MNPT Side DMX 115-3 AR-PVC/T/T-S-H1A7A7B 95713804 2758.00 17.6 BEPDM SS 3/4" MNPT Side DMX 115-3 AR-PVC/E/SS-S-H1A7A7B 96714902 2519.00 17.6 C

PVDF PTFE PTFE 3/4" MNPT Side DMX 115-3 AR-PV/T/T-S-H1A7A7B 91835014 2908.00 17.6 BSS Viton SS 3/4" FNPT Side DMX 115-3 AR-SS/V/SS-S-H1A3A3B 91835015 3070.00 28.7 B

PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.A delivery code for quantities lower than 5 pumps. *1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery▲Delivery within 5 business days

BPVC

BPVC

AR

ARPVC

ARPVC

BPVC


ARPVC

ARPVC

BPVC

PVC

BPVC


36

Integral pressure relief valve (PRV)

Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex Simpled Duplex

$239.00 $495.00 - - - - $291.00 $584.00 - -

Leak detection - Diaphragm breakage indciation (DBI)

$407.00 $811.00 - - $393.00 $786.00 $407.00 $811.00 $407.00 $812.00

Both PRV and DBI

$668.00 $1,391.00 - - - - $739.00 $1,482.00 - -

(Not available with PVC or PVDF 249-3 and 525-3)

Duplex configurations:

Please call factory for pricing information. Duplex list price = 1.5 x Simplex list price.

B Manual stroke length control, No motor, NEMA 56 C flange (X) $0.00

AR External control (Etron Profi) $1,040.00

AT5 One servo motor, 1ø115 V, 50/60 Hz, 4-20 mA stroke length control* $2,097.00

AT5 Two servo motors, 1ø115 V, 50/60 Hz, 4-20 mA stroke length control (Duplex) $3,464.00

Control position:

X no control panel $0.00



W Wall mounted (AR only) - Required for Duplex pumps $184.00

Motor options/voltage: (All AR pumps are shipped with single phase motors.)

E 230/400V50/60HZ 440/480V 60HZ Call factory

F Without motor, Nema 56 C flange $0.00

G 1ø 230 V, 50/60 Hz $364.00

H 1ø120 V, 50/60 Hz $364.00

Valve types:

1 Standard valve $0.00

4 Spring-loaded, discharge only $33.40

5 Valves for abrasive media Call factory

Valve changes:

Valve size Code Change DN8 DN20 DN32





Connections:

A3 3/4" female NPT (SS pumps) $0.00

A4 1 1/4" female NPT (SS pumps) $0.00

A7 3/4" male NPT (PVC, PVDF pumps) $0.00

A8 1 1/4" male NPT (PVC, PVDF pumps) $0.00

Plug type:

X Without plug (use on B version pumps without motors) $0.00






PP-RL

PV-RPP-R

PVC-L PVC-L

PVC-RLPVC-RL

PV-L

SS-RL

SS-RPVC-R

Control variant:


PP-R

SS-LPP-L

PV-RL


37

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMX 52-8, 16.4 gph up to 116 psi Viton Glass 3/4" MNPT No Motor DMX 52-8 B-PVC/V/G-X-F1A7A7 96720199 2561.00 33.1 C

EPDM Ceramic 3/4" MNPT No Motor DMX 52-8 B-PVC/E/SS-X-F1A7A7 91835127 2611.00 33.1 CPVDF PTFE PTFE 3/4" MNPT No Motor DMX 52-8 B-PV/T/T-X-F1A7A7 95713689 3801.00 33.1 C

SS Viton SS 3/4" FNPT No Motor DMX 52-8 B-SS/V/SS-X-F1A3A3 95713692 4188.00 53.0 CViton Glass 3/4" MNPT SIDE DMX 52-8 AR-PVC/V/G-S-H1A7A7B 96720193 3601.00 33.1 C

EPDM Ceramic 3/4" MNPT SIDE DMX 52-8 AR-PVC/E/SS-S-H1A7A7B 95713696 3486.00 33.1 CPVDF PTFE PTFE 3/4" MNPT SIDE DMX 52-8 AR-PV/T/T-S-H1A7A7B 95705379 4841.00 33.1 C

SS Viton SS 3/4" FNPT SIDE DMX 52-8 AR-SS/V/SS-S-H1A3A3B 95713700 5228.00 53.0 C











DMX 95-8, 30 gph up to 116 psi Viton Glass 3/4" MNPT No Motor DMX 95-8 B-PVC/V/G-X-F1A7A7 91835132 2939.00 46.3 C





DMX 100-8, 31.7 gph up to 116 psi Viton Glass 3/4" MNPT No Motor DMX 100-8 B-PVC/V/C-X-H1A7A7B 91835106 2939.00 33.1 B




SS Viton SS 3/4" FNPT SIDE DMX 100-8 AR-PVC/V/C-S-H1A7A7B 91836586 4944.00 53.0 C

DMX 132-10, 41.7 gph up to 116 psi Viton Glass 3/4" MNPT No Motor DMX 132-10 B-PVC/V/G-X-F1A7A7 91835109 2983.00 46.3 B


SS Viton SS 3/4" FNPT No Motor DMX 132-10 B-SS/T/SS-X-H1A3A3B 96717914 3806.00 66.1 CViton Glass 3/4" MNPT SIDE DMX 132-10 AR-PVC/V/G-S-H1A7A7B 91835108 4488.00 46.3 C



PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.Note: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery

BPVC

AR

BPVC

ARPVC

ARPVC

BPVC

BPVC

B

AR


ARPVC

PVC

PVC

PVC

PVC

PVCAR

B


38

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery



SS Viton SS 3/4" FNPT No Motor DMX 152-6 B-SS/T/SS-X-H1A3A3B 95713713 4292.00 66.1 CViton Glass 3/4" MNPT SIDE DMX 152-6 AR-PVC/V/G-S-H1A7A7B 96718175 4257.00 46.3 C








DMX 199-8, 63.1 gph up to 116 psi Viton Glass 3/4" MNPT No Motor DMX 199-8 B-PVC/V/G-X-F1A7A7 91835115 2939.00 46.3 B




SS Viton SS 3/4" FNPT SIDE DMX 199-8 SS/V/SS-S-H1A7A7B 91836408 5008.00 66.1 C







EPDM Ceramic 3/4" MNPT No Motor DMX 321-6 B-PVC/E/SS-X-F1A7A7 91836286 3056.00 33.1 BPVDF PTFE PTFE 3/4" MNPT No Motor DMX 321-6 B-PV/T/T-X-F1A7A7 96719516 3827.00 33.1 C




DMX 525-3, 166.3 gph up to 43.5 psi Viton Glass 1 1/4" MNPT No Motor DMX 525-3 B-PVC/V/G-X-H1A8A8B 91835125 3282.00 46.3 C

EPDM Ceramic 1 1/4" MNPT No Motor DMX 525-3 B-PVC/E/SS-X-H1A8A8B 91836385 3332.00 46.3 CPVDF PTFE PTFE 1 1/4" MNPT No Motor DMX 525-3 B-PV/T/T-X-H1A8A8B 96720102 5721.00 46.3 C

SS Viton SS 1 1/4" MNPT No Motor DMX 525-3 B-SS/V/SS-X-F1A4A4 95713712 4586.00 66.1 CViton Glass 1 1/4" MNPT SIDE DMX 525-3 AR-PVC/V/G-S-H1A8A8B 91836467 4892.00 46.3 C

EPDM Ceramic 1 1/4" MNPT SIDE DMX 525-3 AR-PVC/E/SS-S-H1A8A8B 91836663 4959.00 46.3 CPVDF PTFE PTFE 1 1/4" MNPT SIDE DMX 525-3 AR-PV/T/T-S-H1A8A8B 91836728 6318.00 46.3 C

SS Viton SS 1 1/4" MNPT SIDE DMX 525-3 AR-SS/V/SS-S-H1A4A4B 95713720 5626.00 66.1 CPRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery

B

B

ARPVC

PVC

ARPVC

PVC

PVCAR

BPVC

BPVC

PVC

AR


PVC

BPVC

BPVC

ARPVC

AR


39

DMH Capacities

DMH/KM 251 DMH/KM 280Alldos DMH Size GPH PSI str./min. Alldos DMH Size GPH PSI str./min.

251-2.2 2.2-25 0.69 363 17 280-1.3 1.3-200 0.50 2900 76251-2.3 2.3-16 0.74 232 17 280-2.2 2.2-200 0.70 2900 115251-2.4 2.4-10 0.77 145 17 280-2.5 2.5-200 0.90 2900 144251-4.5 4.5-25 1.43 363 35251-4.9 4.9-16 1.55 232 35 KM 281251-5 5-10 1.58 145 35 Alldos DMH Size GPH PSI str./min.251-11 11-25 3.43 363 75 281-2 2-100 0.60 1450 35251-12 12-16 3.70 232 75 281-4.2 4.2-100 1.30 1450 76251-13 13-10 4.22 145 75 281-6.4 6.4-100 2.00 1450 115251-17 17-25 5.28 363 115 281-8 8-100 2.50 1450 144251-18 18-16 5.81 232 115251-19 19-10 6.07 145 115 DMH/KM 283

Alldos DMH Size GPH PSI str./min.

DMH/KM 252 283-19 19-100 6.10 1450 65Alldos DMH Size GPH PSI str./min. 283-27 27-100 8.40 1450 90252-10 10-16 3.17 232 35 283-33 33-100 10.60 1450 110252-11 11-10 3.45 145 35 283-40 40-100 12.70 1450 134252-23 23-16 7.13 232 75252-24 24-10 7.66 145 75 DMH/KM 285252-36 36-16 11.35 232 115 Alldos DMH Size GPH PSI str./min.252-37 37-10 11.62 145 115 285-20 20-100 6.30 1450 33

285-52 52-100 16.60 1450 88

DMH/KM 253 285-70 70-100 22.20 1450 118Alldos DMH Size GPH PSI str./min. 285-80 80-100 25.30 1450 134253-21 21-10 6.60 145 35253-43 43-10 13.70 145 75 DMH/KM 286253-67 67-10 20.60 145 115 Alldos DMH Size GPH PSI str./min.253-83 83-10 26.10 145 144 286-85 85-50 26.90 725 67

286-111 111-50 35.10 725 88

DMH/KM 254 286-170 170-50 53.90 725 134Alldos DMH Size GPH PSI str./min.254-50 50-10 15.80 145 32 DMH/KM 287254-97 97-16 30.60 232 65 Alldos DMH Size GPH PSI str./min.

254-102 102-10 32.20 145 65 287-18 18-200 5.80 2900 67254-136 136-16 43.00 232 90 287-23 23-200 7.40 2900 88254-143 143-10 45.40 145 90 287-31 31-200 9.80 2900 118254-166 166-16 52.80 232 110 287-36 36-200 11.40 2900 134254-175 175-10 55.40 145 110254-202 202-16 63.90 232 134 DMH/KM 288254-213 213-10 67.30 145 134 Alldos DMH Size GPH PSI str./min.

288-7.5 7.5-200 2.40 2900 67

DMH/KM 255 288-10 10-200 3.30 2900 88Alldos DMH Size GPH PSI str./min. 288-13 13-200 4.10 2900 118

255-194 194-10 61.50 145 65 288-15 15-200 4.90 2900 134255-270 270-10 85.50 145 90255-332 332-10 105.00 145 110 Note:255-403 403-10 128.00 145 134 Double capacity (GPH) with

Duplex versions.

DMH/KM 257Alldos DMH Size GPH PSI str./min.

257-220 220-10 69.70 145 33257-440 440-10 139.40 145 65257-575 575-10 182.20 145 90257-770 770-10 244.00 145 110257-880 880-10 278.00 145 134


GRUNDFOS DOSING Metering PumpsDMH - ALLDOS KM Capacity Overview

40

Type key

Example: DMH 13-10 B -PV / T / T - X - F 1 A9A9 XSize Plug typeControl variant B US plug

B Manaul control X No plug

AR External control (Etron Profi) Inlet/Discharge connectionsAT5 Servo motor, 115V 4-20 mA control A3 3/4" female NPT

Pump head A7 3/4" male NPT


PV PVDF P 1 1/4" Flange

PVC Polyvinyl chloride S 3/8" x 1/2" tubing

SS 316 stainless steel V 1/4" female NPT

Y Hastelloy C Valve typePV-R PVDF + integrated relief valve 1 Standard valves

PVC-R PVC + integrated relief valve 2 Spring-loaded

PP-L PP + leak detection 3 Spring-loaded*

PV-L PV + leak detection 4 Spring-loaded discharge

PVC-L PVC + leak detection 5 Valves for abrasive media

SS-L 316 SS + leak detection Supply voltageY-L Hastelloy C + leak detection H 1ø 110-120 V, 50/60 Hz

PV-RL PVDF + integrated relief valve + leak detection Without motor,

PVC-RL PVC + integrated relief valve + leak detection Nema flangeGasket material Control panel position

E EPDM S Side 90° from pump head

V FKM F Front, 180° from pump head

T PTFE W Wall mounted

Valve ball material X No control panel

C Ceramic

G Glass * 7 psi inlet, 11 psi discharge opening pressureT PTFE

SS Stainless steel

Y Hastelloy C

F


GRUNDFOS DOSING Metering PumpsDMH - ALLDOS KM

41


Simplex Duplex Simplex Duplex Simplex Duplex Simplex Duplex

$1,328.00 $2,700.00 $1,328.00 $2,700.00 $1,328.00 $2,700.00 $1,612.00 $3,225.00

Duplex list price = 1.5 x simplex list price.

Control variant:

B Manual stroke length control, No motor, NEMA 56 C flange $0.00

AR External control (Etron Profi) $1,003.00

AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,940.00

Control position:

X No control panel $0.00



W Wall mounted Etron Profi (AR only, use wall mounted controls on duplex pumps) $179.00

Motor voltage:

F No motor - NEMA 56C flange $0.00

H 1x120V, 50/60 Hz (AR only) $68.00

Valve type:

1 Standard valve $0.00

2 Spring loaded valve $58.50

3 Spring-loaded - 7 psi inlet, 11 psi discharge opening pressure $55.40

4 Spring-loaded - discharge side only $29.30

5 Valves for abrasive media $299.00

Valve changes:

Valve size Code change DN8 DN20 DN32





Connections:

S 3/8" x 1/2" Tubing, PVC and Polypropylene pumps $0.00

A9 1/2" male NPT, PVC, PVDF, and SS pumps $0.00

V 1/4" female NPT, SS pumps $0.00

Plug type:

X No plug $0.00

B USA, North America - only AR version pumps $0.00

Other options:

96730802 API 675 performance pump curve

91836210 Inspection certificate according to EN 10207





PVC-L

$475.00 Adder to Net Price

PP-L PV-L SS-L



GRUNDFOS DOSING Metering PumpsDMH 251 - ALLDOS KM 251

42

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 2.2-25, 0.69 gph up to 363 psiB SS Viton SS 1/4" FNPT No Motor DMH 2.2-25 B-SS/V/SS-X-F1VVX 91836345 2413.00 21.0 C

AR SS Viton SS 1/4" FNPT Side DMH 2.2-25 AR-SS/V/SS-S-F1VVB 95713637 3416.00 24.0 C

DMH 2.3-16, 0.74 gph up to 232 psiViton Glass 1/2" MNPT No Motor DMH 2.3-16 B-PVC/V/G-X-F1A9A9X 91836734 2222.00 18.0 C

EPDM SS 1/2" MNPT No Motor DMH 2.3-16 B-PVC/E/SS-X-F1A9A9X 95713651 2274.00 18.0 CPVDF PTFE PTFE 1/2" MNPT No Motor DMH 2.3-16 B-PV/T/T-X-F1A9A9X 95713657 2948.00 18.0 C

SS Viton SS 1/2" MNPT No Motor DMH 2.3-16 B-SS/V/SS-X-F1A9A9X 95713656 3248.00 21.0 CViton Glass 1/2" MNPT Side DMH 2.3-16 AR-PVC/V/G-S-H1A9A9B 95712810 3292.00 18.0 B

EPDM SS 1/2" MNPT Side DMH 2.3-16 AR-PVC/E/SS-S-H1A9A9B 95713640 3277.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 2.3-16 AR-PV/T/T-S-H1A9A9B 96722845 3951.00 18.0 C

SS Viton SS 1/4" FNPT Side DMH 2.3-16 AR-SS/V/SS-S-H1VVB 91835155 4248.00 21.0 C

DMH 2.4-10, 0.77 gph up to 145 psi (1.54 gph on Duplex version)Viton Glass 1/2" MNPT No Motor DMH 2.4-10 B-PVC/V/G-X-F1A9A9X 95707615 1720.00 18.0 C


SS Viton SS 1/2" MNPT No Motor DMH 2.4-10 B-SS/V/SS-X-F1A9A9X 96721904 2085.00 21.0 CViton Glass 1/2" MNPT Side DMH 2.4-10 AR-PVC/V/C-S-H1A9A9B 95708720 2920.00 18.0 C


SS Viton SS 1/2" MNPT Side DMH 2.4-10 AR-SS/V/SS-S-H1A9A9B 95713647 3087.00 21.0 C

DMH 4.5-25, 1.43 gph up to 232 psiB SS Viton SS 1/2" MNPT No Motor DMH 4.5-25 B-SS/V/SS-X-F1A9A9X 91836402 2413.00 21.0 C

AR SS Viton SS 1/2" MNPT FKM DMH 4.5-25 AR-SS/V/SS-S-H1A9A9B 95713638 3416.00 21.0 C

DMH 4.9-16, 1.55 gph up to 232 psiViton Glass 1/2" MNPT No Motor DMH 4.9-16 B-PVC/V/G-X-F1A9A9X 95711334 1827.00 25.0 C


SS Viton SS 1/4" FNPT No Motor DMH 4.9-16 B-SS/V/SS-X-F1VVX 91835147 2368.00 29.0 CViton Glass 1/2" MNPT Side DMH 4.9-16 AR-PVC/V/G-S-H1A9A9B 95713650 2829.00 25.0 C



DMH 5.0-10, 1.58 gph up to 145 psi (3.1 gph on Duplex version)Viton Glass 1/2" MNPT No Motor DMH 5.0-10 B-PVC/V/C-X-F1A9A9X 91835150 1564.00 18.0 C


SS Viton SS 1/2" MNPT No Motor DMH 5.0-10 B-SS/V/SS-X-F1A9A9X 95713655 2105.00 21.0 CViton Glass 1/2" MNPT Side DMH 5.0-10 AR-PVC/V/G-S-H1A9A9B 91836573 2631.00 18.0 C



DMH 11-25, 3.43 gph up to 363 psi (6.86 gph on Duplex version)B SS Viton SS 1/4" FNPT No Motor DMH 11-25 B-SS/V/SS-X-F1VVX 95701267 2577.00 21.0 C

AR SS Viton SS 1/4" FNPT FKM DMH 11-25 B-SS/V/SS-S-H1VVB 95713639 3617.00 21.0 C



BPVC

ARPVC

BPVC

ARPVC

ARPVC

BPVC

AR

BPVC

PVC


43

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 12-16, 3.7 gph up to 232 psi (7.4 gph on Duplex version)Viton Glass 1/2" MNPT No Motor DMH 12-16 B-PVC/V/C-X-F1A9A9X 91835136 1987.00 18.0 C

EPDM SS 1/2" MNPT No Motor DMH 12-16 B-PVC/E/SS-X-F1A9A9X 95713622 2039.00 18.0 CPVDF PTFE PTFE 1/2" MNPT No Motor DMH 12-16 B-PV/T/T-X-F1A9A9X 96721146 2683.00 18.0 C

SS Viton SS 1/4" FNPT No Motor DMH 12-16 B-SS/V/SS-X-F1VVX 96721147 3779.00 24.0 CViton Glass 1/2" MNPT Side DMH 12-16 AR-PVC/V/G-S-H1A9A9B 95713623 3027.00 18.0 C

EPDM SS 1/2" MNPT Side DMH 12-16 AR-PVC/E/SS-S-H1A9A9B 95711676 3073.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 12-16 AR-PV/T/T-S-H1A9A9B 95702307 3444.00 18.0 C

SS Viton SS 1/4" FNPT Side DMH 12-16 AR-SS/V/SS-S-H1A9A9B 95713621 4781.00 24.0 C

DMH 13-10, 4.22 gph up to 145 psi (8.44 gph on Duplex version)PTFE PTFE 3/8"x1/2" Tubing No Motor DMH 13-10 B-PVC/T/T-X-F1A9A9X 95711917 1805.00 18.0 A ▲EPDM SS 3/8"x1/2" Tubing No Motor DMH 13-10 B-PVC/E/SS-X-F1A9A9X 91836518 1740.00 18.0 C

PVDF PTFE PTFE 1/2" MNPT No Motor DMH 13-10 B-PV/T/T-X-F1A9A9X 91835140 2112.00 18.0 BSS Viton SS 1/2" MNPT No Motor DMH 13-10 B-SS/V/SS-X-F1A9A9X 96721299 3218.00 21.0 C

Viton Glass 3/8"x1/2" Tubing Side DMH 13-10 AR-PVC/V/G-S-H1A9A9B 91836707 2793.00 18.0 CEPDM SS 3/8"x1/2" Tubing Side DMH 13-10 AR-PVC/E/SS-S-H1A9A9B 91836652 2805.00 18.0 C

PVDF PTFE PTFE 1/2" MNPT Side DMH 13-10 AR-PV/T/T-S-H1A9A9B 95705143 3180.00 18.0 CSS Viton SS 1/2" MNPT Side DMH 13-10 AR-SS/V/SS-S-H1A9A9B 95713620 4220.00 21.0 C

DMH 17-25, 5.28 gph up to 363 psiB SS Viton SS 1/4" FNPT FKM DMH 17-25 B-SS/V/SS-X-F1VVX 95711457 2739.00 29.0 C

AR SS Viton SS 1/2" FNPT FKM DMH 17-25 B-SS/V/SS-S-H1A9A9B 95713624 3779.00 29.0 C

DMH 18-16, 5.81 gph up to 232Viton Glass 3/8"x1/2" Tubing No Motor DMH 18-16 B-PVC/V/G-X-F1A9A9X 95713629 2534.00 23.0 C

EPDM SS 3/8"x1/2" Tubing No Motor DMH 18-16 B-PVC/E/SS-X-F1A9A9X 95705729 2179.00 23.0 CPVDF PTFE PTFE 1/2" MNPT No Motor DMH 18-16 B-PV/T/T-X-F1A9A9X 95713630 3370.00 23.0 C

SS Viton SS 1/2" MNPT No Motor DMH 18-16 B-SS/V/SS-X-F1A9A9X 91836387 2695.00 29.0 BViton Glass 3/8"x1/2" Tubing Side DMH 18-16 AR-PVC/V/G-S-H1A9A9B 95713628 3573.00 23.0 C

EPDM SS 3/8"x1/2" Tubing Side DMH 18-16 AR-PVC/E/SS-S-H1A9A9B 95713627 3626.00 23.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 18-16 AR-PV/T/T-S-H1A9A9B 95713626 3260.00 23.0 C

SS Viton SS 1/2" MNPT Side DMH 18-16 AR-SS/V/SS-S-H1A9A9B 95713625 3734.00 29.0 C

DMH 19-10, 6.07 gph up to 145 psi (12.14 gph on Duplex version)Viton Glass 3/8"x1/2" Tubing No Motor DMH 19-10 B-PVC/V/G-X-F1A9A9X 95713631 1886.00 18.0 B

EPDM SS 3/8"x1/2" Tubing No Motor DMH 19-10 B-PVC/E/SS-X-F1A9A9X 91836431 1902.00 18.0 BPVDF PTFE PTFE 1/2" MNPT No Motor DMH 19-10 B-PV/T/T-X-F1A9A9X 91835145 2273.00 18.0 C

SS Viton SS 1/2" MNPT No Motor DMH 19-10 B-SS/V/SS-X-F1A9A9X 95702947 2428.00 21.0 CViton Glass 1/2" MNPT Side DMH 19-10 AR-PVC/V/G-S-H1A9A9B 95709440 2955.00 18.0 C



PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 OD▲Delivery within 5 business days

PVC

BPVC

ARPVC

BPVC


PVC

ARPVC

BPVC

B

ARPVC

AR


44

Leak detection - Diaphragm breakage indication (DBI)PP-L PV-L SS-L

Simplex $1,328.00 $1,328.00 $1,328.00 $1,612.00Duplex: $2,700.00 $2,700.00 $2,700.00 N/ADuplex list price = 1.5 x simplex list price.Control variant:

B Manual stroke length control, No motor, NEMA 56 C flange $0.00AR External control (Etron Profi) $1,003.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,940.00

Control position:X No control panel $0.00S Side, 90° from pump head (AR only) $0.00F Front - 180° from pump head (AR only, non-standard) $0.00W Wall mounted Etron Profi (use wall mounted controls on duplex pump $179.00

Motor voltage:F No motor - NEMA 56C flange $0.00H 1x120V, 50/60 Hz (AR only) $68.00

Valve type:1 Standard valve $0.002 Spring loaded valve $58.503 Spring-loaded - 7 psi inlet, 11 psi discharge opening pressure $55.404 Spring-loaded - discharge side only $29.305 Valves for abrasive media $299.00

Valve size: DN8 DN20

Valve changes Code changes (1/2") (1-3/4") DN32

Stainless steel valve balls in PVC or PP pumps Ball code SS $22.00 $22.00 $54.40Ceramic balls in PVC or PP pumps Ball code C $78.50 $175.00 N/APTFE valve balls in PVC, PP, or PVDF valve cartridge Ball code T $47.10 $47.10 $126.00PTFE coated gasket in PVC, PP, or SS valve cartridge Gasket code T $208.00 $208.00 $346.00

Connections:S 3/8" x 1/2" Tubing, PVC and Polypropylene pumps $0.00A9 1/2" male NPT, PVC, PVDF, and SS pumps $0.00V 1/4" female NPT, SS pumps $0.00

Plug type:X No plug $0.00B USA, North America - only AR version pumps $0.00

Other options:96730802 API 675 performance pump curve91836210 Inspection certificate according to EN 10207


*Please use AT for the control variant on the type key. Servomotor must be ordered



PVC-:L





45

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 10-16, 3.17 gph up to 232 psiViton Glass 1/2" MNPT Motor Inc. DMH 10-16 B-PVC/V/G-X-F1A9A9X 95713581 4097.00 18.0 C

EPDM SS 1/2" MNPT Motor Inc. DMH 10-16 B-PVC/E/SS-X-F1A9A9X 95713582 2418.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Motor Inc. DMH 10-16 B-PV/T/T-X-F1A9A9X 95713583 2992.00 18.0 C

SS Viton SS 1/2" MNPT Motor Inc. DMH 10-16 B-SS/V/SS-X-F1A9A9X 95713584 3097.00 21.0 CViton Glass 1/2" MNPT Side DMH 10-16 AR-PVC/V/G-S-H1A9A9X 95713588 3405.00 18.0 C

EPDM SS 1/2" MNPT Side DMH 10-16 AR-PVC/E/SS-S-H1A9A9X 95713589 3457.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 10-16 AR-PV/T/T-S-H1A9A9B 95713590 4032.00 18.0 C


DMH 11-10, 3.45 gph up to 145 psiViton Glass 3/8"x1/2" Tubing Motor Inc. DMH 11-10 B-PVC/V/G-X-F1SSX 91835154 1668.00 18.0 C

EPDM SS 3/8"x1/2" Tubing Motor Inc. DMH 11-10 B-PVC/E/SS-X-F1SSX 95713593 1718.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Motor Inc. DMH 11-10 B-PV/T/T-X-F1A9A9X 91836664 1961.00 18.0 C

SS Viton SS 1/4" FNPT Motor Inc. DMH 11-10 B-SS/V/SS-X-F1VVX 95713595 2499.00 21.0 CPVC Viton Glass 3/8"x1/2" Tubing Side DMH 11-10 AR-PVC/V/G-S-H1SSB 95707387 2736.00 18.0 C

EPDM SS 3/8"x1/2" Tubing Side DMH 11-10 AR-PVC/E/SS-S-H1SSB 95713592 2758.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 11-10 AR-PV/T/T-S-H1A9A9B 95713591 3001.00 18.0 C

SS Viton SS 1/4" FNPT Side DMH 11-10 AR-SS/V/SS-S-H1VVB 96722710 3501.00 21.0 C

DMH 23-16, 7.13 gph up to 232 psiViton Glass 3/8"x1/2" Tubing Motor Inc. DMH 23-16 B-PVC/V/G-X-F1SSX 91835156 2222.00 18.0 B

EPDM SS 3/8"x1/2" Tubing Motor Inc. DMH 23-16 B-PVC/E/SS-X-F1SSX 95713596 2274.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Motor Inc. DMH 23-16 B-PV/T/T-X-F1A9A9X 96722845 3291.00 18.0 C

SS Viton SS 1/2" MNPT Motor Inc. DMH 23-16 B-SS/V/SS-X-F1A9A9X 91835155 4248.00 21.0 CViton Glass 1/2" MNPT Side DMH 23-16 AR-PVC/V/G-S-H1A9A9B 95712810 3292.00 18.0 B



DMH 24-10, 7.66 gph up to 145 psi (Duplex - 15.32 gph)PVC Viton Glass 3/8"x1/2" Tubing Motor Inc. DMH 24-10 B-PVC/V/G-X-F1SSX 91835159 1668.00 18.0 B

EPDM SS 1/2" MNPT Motor Inc. DMH 24-10 B-PVC/E/SS-X-F1A9A9X 95712401 1694.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Motor Inc. DMH 24-10 B-PV/T/T-X-F1A9A9X 91835161 1961.00 18.0 B

SS Viton SS 1/2" MNPT Motor Inc. DMH 24-10 B-SS/V/SS-X-F1A9A9X 95708716 2911.00 21.0 CPVC Viton Glass 3/8"x1/2" Tubing Side DMH 24-10 AR-PVC/V/G-S-F1SSB 91836650 2736.00 18.0 C

EPDM SS 3/8"x1/2" Tubing Side DMH 24-10 AR-PVC/E/SS-S-F1SSB 95713604 2760.00 18.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 24-10 AR-PV/T/T-S-F1A9A9B 95713605 3431.00 18.0 C

SS Viton SS 1/2" MNPT Side DMH 24-10 AR-SS/V/SS-S-F1A9A9B 95713603 3251.00 21.0 C

DMH 36-16, 11.4 gph up to 232 psi Viton Glass 1/2" MNPT Motor Inc. DMH 36-16 B-PVC/V/G-X-F1A9A9X 91836596 2222.00 18.0 C


SS Viton SS 1/2" MNPT Motor Inc. DMH 36-16 B-SS/V/SS-X-F1A9A9X 95713609 3004.00 21.0 CViton Glass 3/8"x1/2" Tubing Side DMH 36-16 AR-PVC/V/G-S-H1SSB 91836310 3290.00 18.0 C



DMH 37-10, 11.6 gph up to 145 psi (Duplex - 23.2 gph)Viton Glass 1/2" MNPT Motor Inc. DMH 37-10 B-PVC/V/G-X-F1A9A9X 91835166 2001.00 18.0 C


SS Viton SS 1/2" MNPT Motor Inc. DMH 37-10 B-SS/V/SS-X-F1A9A9X 96723156 2335.00 21.0 CViton Glass 1/2" MNPT Side DMH 37-10 AR-PVC/V/G-S-H1A9A9B 91836649 3041.00 18.0 C




PVC

ARPVC

B

AR


ARPVC

BPVC

BPVC

ARPVC

B

BPVC

ARPVC

BPVC

AR


46

Leak detection - Diaphragm breakage indication (DBI)PP-L PV-L SS-L

Simplex: $1,328.00 $1,328.00 $1,780.00 $1,935.00Duplex: $2,700.00 $2,700.00 $3,484.00 $3,871.00Duplex list price = 1.5 x simplex list price.Control variant:

B Manual stroke length control, No motor, NEMA 56 C flange $0.00AR External control (Etron Profi) $1,003.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,940.00

Control position:X No control panel $0.00S Side, 90° from pump head (AR only) $0.00F Front - 180° from pump head (AR only, non-standard) $0.00W Wall mounted Etron Profi (use wall mounted controls on duplex pumps) $179.00

Motor voltage:F No motor - NEMA 56C flange $0.00H 1x120V, 50/60 Hz (AR only) $67.905 3 x 230/460 V, 60 Hz Call factoryE 230/400V50/60HZ 440/480V 60HZ Call factory


Valve changes:Valve size Code changes DN8 DN20 DN32


Connections:A7 3/4" male NPT - PVC, PP, and PVDF pump heads $0.00A3 3/4" female NPT - SS pump heads $0.00




*Please use AT for the control variant on the type key. Servomotor must be ordered



PVC-L





47

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 21-10, 6.6 gph up to 145 psiViton Glass 3/4" MNPT No Motor DMH 21-10 B-PVC/V/G-X-F1A7A7X 95713560 2594.00 25.0 C


SS Viton SS 1/2" MNPT No Motor DMH 21-10 B-SS/V/SS-X-F1A9A9X 95713562 3401.00 35.0 CViton Glass 3/4" MNPT Side DMH 21-10 AR-PVC/V/G-S-F1A7A7B 95713564 3702.00 25.0 C

EPDM SS 3/4" MNPT Side DMH 21-10 AR-PVC/E/SS-S-F1A7A7B 95713566 3754.00 25.0 CPVDF PTFE PTFE 1/2" MNPT Side DMH 21-10 AR-PV/T/T-S-F1A9B 95713567 4360.00 25.0 C

SS Viton SS 1/2" MNPT Side DMH 21-10 AR-SS/V/SS-S-F1A9B 95713563 4383.00 35.0 C

DMH 43-10, 13.7 gph up to 145 psi (Duplex - 27.4 gph)Viton Glass 3/4" MNPT No Motor DMH 43-10 B-PVC/V/G-X-F1A7A7X 91835173 1964.00 25.0 B


SS Viton SS 3/4" FNPT No Motor DMH 43-10 B-SS/V/SS-X-F1A3A3X 96723697 3262.00 35.0 CViton Glass 3/4" MNPT Side DMH 43-10 AR-PVC/V/G-S-F1A7A7B 96723641 3104.00 25.0 C

EPDM SS 3/4" MNPT Side DMH 43-10 AR-PVC/E/SS-S-F1A7A7B 95713568 3072.00 25.0 CPVDF PTFE PTFE 3/4" MNPT Side DMH 43-10 AR-PV/T/T-S-F1A7A7B 96723678 4076.00 25.0 C

SS Viton SS 3/4" FNPT Side DMH 43-10 AR-SS/V/SS-S-F1A3A3B 95708325 4262.00 35.0 C


EPDM SS 3/4" MNPT No Motor DMH 67-10 B-PVC/E/SS-X-F1A7A7X 91836301 2051.00 25.0 BPVDF PTFE PTFE 1/2" MNPT No Motor DMH 67-10 B-PV/T/T-X-F1A9A9X 91835178 2949.00 25.0 A ▲




DMH 83-10, 26.1 gph up to 145 psi (Duplex - 52.2 gph)Viton Glass 3/4" MNPT No Motor DMH 83-10 B-PVC/V/G-X-F1A7A7X 91835186 2095.00 25.0 A ▲

EPDM SS 3/4" MNPT No Motor DMH 83-10 B-PVC/E/SS-X-F1A7A7X 96723973 2140.00 25.0 CPVDF PTFE PTFE 1/2" MNPT No Motor DMH 83-10 B-PV/T/T-X-F1A9A9X 91835188 3004.00 25.0 A ▲




PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery▲Delivery within 5 business days

ARPVC

BPVC

ARPVC

PVC

ARPVC

BPVC


B

PVCAR

PVCB


48

Leak detection - Diaphragm breakage indication (DBI)PVC-L PP-L PV-L SS-L


B Manual stroke length control, No motor, NEMA 56 C flange $0.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,940.00

Control position:X No control panel $0.00

Motor voltage:F No motor - NEMA 56C flange $0.00


Valve changes:Valve size Code change DN8 DN20 DN32


Connections:A7 3/4" male NPT - PVC, PP, and PVDF pump heads $0.00A3 3/4" female NPT - SS pump heads $0.00

Plug type:X No plug $0.00



*Please use ATØ for the control variant on the type key. Servomotor must be ordered



$475.00 Adder to Net Price$600.00 Adder to Net Price



49

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 50-10, 15.8 gph up to 145 psiViton Glass 3/4" MNPT No Motor DMH 10-16 B-PVC/V/G-X-F1A7A7X 91835206 3253.00 60.0 C


SS Viton SS 3/4" FMNPT No Motor DMH 10-16 B-SS/V/SS-X-F1A3A3X 96724390 4516.00 82.0 C

DMH 97-16, 30.6 gph up to 232 psiB SS Viton SS 3/4" FMNPT No Motor DMH 97-16 B-SS/V/SS-X-F1A3A3X 96724419 6331.00 82.0 C


EPDM SS 3/4" MNPT No Motor DMH 102-10 B-PVC/E/SS-X-F1A7A7X 96724085 3294.00 70.0 CPVDF PTFE PTFE 3/4" MNPT No Motor DMH 102-10 B-PV/T/T-X-F1A7A7X 91835191 3933.00 70.0 B


DMH 136-16, 43 gph up to 232 psiB SS Viton SS 3/4" FMNPT No Motor DMH 136-16 B-SS/V/SS-X-F1A3A3X 95713558 6331.00 82.0 C






EPDM SS 3/4" MNPT No Motor DMH 175-10 B-PVC/E/SS-X-F1A7A7X 96724215 3654.00 70.0 CPVDF PTFE PTFE 3/4" MNPT No Motor DMH 175-10 B-PV/T/T-X-F1A7A7X 91835200 4285.00 70.0 A ▲





SS Viton SS 3/4" FMNPT No Motor DMH 213-10 B-SS/V/SS-X-F1A3A3X 91835205 4337.00 82.0 B

PRICES: Effective in USA ONLY and subject to change without notice. WEIGHTS: Shipping weights are approximate.*1/4"= 0.17 ID x 0.25 OD; 3/8"= 0.25 ID x 0.375 OD; 1/2"= 0.375 ID x 0.5 ODNote: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery▲Delivery within 5 business days

BPVC

BPVC


BPVC

BPVC

BPVC


50



B Manual stroke length control, No motor, NEMA 56 C flange $0.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,940.00


Motor voltage:F No motor - NEMA 56C flange $0.00




Connections:A7 3/4" male NPT - PVC, PP, and PVDF pump heads $0.00P 1 1/4" ANSI flange - Used on inlet of all DMX 403-10 pumps. $0.00A3 3/4" female NPT - SS pump heads $0.00










51

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 194-10, 61.5 gph up to 145 psi (Duplex - 123 gph)Viton Glass 3/4" MNPT No Motor DMH 194-10 B-PVC/V/G-X-F1A7A7X 91835211 3903.00 75.0 B



DMH 270-10, 85.5 gph up to 145 psi (Duplex - 171 gph)Viton Glass 3/4" MNPT No Motor DMH 270-10 B-PVC/V/G-X-F1A7A7X 96724526 3903.00 75.0 C



DMH 332-10, 105 gph up to 145 psiViton Glass 3/4" MNPT No Motor DMH 332-10 B-PVC/V/G-X-F1A7A7X 91835213 3910.00 75.0 B



DMH 403-10, 128 gph up to 145 psi (Duplex - 256 gph)Viton Glass 3/4" MNPT No Motor DMH 403-10 B-PVC/V/G-X-F1A7PX 91835217 4038.00 75.0 B

EPDM SS 3/4" MNPT No Motor DMH 403-10 B-PVC/E/SS-X-F1A7PX 91836668 4112.00 75.0 CPVDF PTFE PTFE 3/4" MNPT No Motor DMH 403-10 B-PV/T/T-X-F1A7PX 91835216 5605.00 75.0 C

SS Viton SS 3/4" FMNPT No Motor DMH 403-10 B-SS/V/SS-X-F1A3P 91836399 5187.00 80.0 C



BPVC

BPVC

BPVC

BPVC


52



B Manual stroke length control, No motor, NEMA 145TC flange $0.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,940.00

Control position: $0.00X No control panel $0.00

Motor voltage:F No motor - NEMA 145TC flange $0.00

Valve type:1 Standard valve $0.002 Spring loaded valve Call factory3 Spring-loaded - 7 psi inlet, 11 psi discharge opening pressure Call factory4 Spring-loaded - discharge side only Call factory5 Valves for abrasive media Call factory



Connections:P 1 1/4" ANSI flange $0.00










53

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 220-10, 69.7 gph up to 145 psiViton Glass 1 1/4" ANSI No Motor DMH 220-10 B-PVC/V/G-X-F1PPX 95713549 5870.00 75.0 C

EPDM SS 1 1/4" ANSI No Motor DMH 220-10 B-PVC/E/SS-X-F1PPX 95713088 5915.00 75.0 CPVDF PTFE PTFE 1 1/4" ANSI No Motor DMH 220-10 B-PV/T/T-X-F1PPX 95713550 7580.00 75.0 C

SS Viton SS 1 1/4" ANSI No Motor DMH 220-10 B-SS-X/V/SS-X-F1PPX 95713551 7654.00 80.0 C

DMH 440-10, 139 gph up to 145 psiViton Glass 1 1/4" ANSI No Motor DMH 440-10 B-PVC/V/G-X-F1PPX 91836654 5869.00 75.0 C

EPDM SS 1 1/4" ANSI No Motor DMH 440-10 B-PVC/E/SS-X-F1PPX 95713552 5915.00 75.0 CPVDF PTFE PTFE 1 1/4" ANSI No Motor DMH 440-10 B-PV-X/T/T-X-F1PPX 95700559 7578.00 75.0 C


DMH 575-10, 182 gph up to 145 psi (Duplex - 364 gph)Viton Glass 1 1/4" ANSI No Motor DMH 575-10 B-PVC/V/G-X-F1PPX 91835219 5885.00 75.0 C











BPVC

BPVC

BPVC

BPVC

BPVC


54


Simplex$1,412.00

Duplex list price = 1.5 x simplex list price.Control variant:

B Manual stroke length control, No motor, NEMA 5 $0.00AR External control (Etron Profi) $1,066.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA c $1,940.00

Control position:X No control panel $0.00S Side, 90° from pump head (AR only)F Front - 180° from pump head (AR only, non-stan $0.00W Wall mounted Etron Profi (AR only) (use wall mo $190.00

Motor voltage:F No motor - NEMA 56C flange (1/4 HP motor typi $0.00H 1x120V, 50/60 Hz (AR only) $69.00

Valve type:1 Standard valve $0.002 Spring loaded valve Call factory3 Spring-loaded - 7 psi inlet, 11 psi discharge open Call factory4 Spring-loaded - discharge side only Call factory5 Valves for abrasive media Call factory

Connections:A3 3/4" FNPT $0.00V 1/4" female NPT, SS pumps $0.00


Other options96730802 API 675 performance pump curve91836210 Inspection certificate according to EN




SS-L



Duplex$2,823.00


GRUNDFOS DOSING Metering PumpsDMH 280/281 - ALLDOS KM 280/281

55


Simplex$1,440.00


B Manual stroke length control, No motor, NEMA flange $0.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control* $1,942.00


Motor voltage:F No motor - NEMA flange $0.00

(283 - 3/4 HP motor recommended, NEMA 56 C flange)(285 - 1 1/2 HP motor recommended, NEMA 145 TC flange)

Valve type:1 Standard valve $0.002 Spring loaded valve Call factory3 Spring-loaded - 7 psi inlet, 11 psi discharge opening pre Call factory4 Spring-loaded - discharge side only Call factory5 Valves for abrasive media Call factory


Stainless steel valve balls in PVC or PP puBall code SS $22.00 $22.00 $54.40Ceramic balls in PVC or PP pumps Ball code C $78.50 $175.00 N/APTFE valve balls in PVC, PP, or PVDF valvBall code T $47.10 $47.10 $126.00PTFE coated gasket in PVC, PP, or SS valGasket code T $208.00 $208.00 $346.00

Connections:A3 3/4" female NPT $0.00



NOTE: Adders are approximate values*Please use ATØ for the control variant on the type key. Servomotor must be ordered


SS-L



Duplex$2,884.00


GRUNDFOS DOSING Metering PumpsDMH 283/285 - ALLDOS KM 283/285

56


Simplex1,440.00


B Manual stroke length control 0.00AT5 Servo motor, 1x115V 50/60Hz supply, 4-20mA control 1,942.00

Control position:X No control panel 0.00

Motor voltage:F No motor 0.00

(DMH 286, 287 - NEMA 145 TC flange, 1 1/2 HP motor recommended)(DMH 288 - NEMA 56C flange, 3/4 HP motor recommended)

Valve type:1 Standard valve 0.002 Spring loaded valve Call factory3 Spring-loaded - 7 psi inlet, 11 psi discharge opening p Call factory4 Spring-loaded - discharge side only Call factory5 Valves for abrasive media Call factory


Stainless steel valve balls in PVC or PP pumpsBall code SS 22.00 22.00 54.40Ceramic balls in PVC or PP pumps Ball code C 78.50 175.00 N/APTFE valve balls in PVC, PP, or PVDF valve caBall code T 47.10 47.10 126.00PTFE coated gasket in PVC, PP, or SS valve cGasket code T 208.00 208.00 346.00

Connections:A3 3/4" female NPT (DMH 286, 287) 0.00V 1/4" female NPT (DMH 288)

Plug type:X No plug 0.00


NOTE: Adders are approximate values*Please use ATØ for the control variant on the type key. Servomotor must be ordered


SS-L



Duplex2,884.00


GRUNDFOS DOSING Metering PumpsDMH 286/287/288 - ALLDOS KM 286/287/288

57

Control Variant

Pump Head

Material

Gasket Material

Valve Ball Material


Discharge[in]

Control Position


List Price[$ USD]

We

igh

t-lbs

AB

C D

eliv

ery

DMH 85-50, 26.90 gph up to 725 psiB SS Viton SS 3/4" FMNPT No Motor DMH 85-50 B-SS-X/V/SS-X-F1A3A3X On request 9914.00 80.0 C



DMH 2-100, 0.60 gph up to 1450 psiB SS Viton SS 1/4" FNPT No Motor DMH 2-100 B-SS-X/V/SS-X-F2VVX 95704812 4415.00 30.0 C

DMH 4.2-100, 1.30 gph up to 1450 psiB SS Viton SS 1/4" FNPT No Motor DMH 4.2-100 B-SS-X/V/SS-X-F1VVX 91836704 4414.00 30.0 C

DMH 6.4-100, 2 gph up to 1450 psiB SS Viton SS 1/4" FNPT No Motor DMH 6.4-100 B-SS-X/V/SS-X-F1VVX On request 4188.00 30.0 C

DMH 8-100, 2.5 gph up to 1450 psiB SS Viton SS 1/4" FNPT No Motor DMH 8-100 B-SS-X/V/SS-X-F1VVX 91836276 4414.00 30.0 C








DMH 1.3-200, 0.5 gph up to 2900 psiB SS Viton SS 1/4" FNPT No Motor DMH 1.3-200 B-SS-X/V/SS-X-F1VVX On request 4568.00 30.0 C

DMH 2.5-200, 0.9 gph up to 2900 psiB SS Viton SS 1/4" FNPT No Motor DMH 2.5-200 B-SS-X/V/SS-X-F1VVX On request 4630.00 30.0 C

DMH 7.5-200, 2.40 gph up to 2900 psiB SS Viton SS 3/4" FMNPT No Motor DMH 7.5-200 B-SS-X/V/SS-X-F1A3A3X On request 8521.00 80.0 C





DMH 23-200, 7.4 gph up to 2900 psiB SS Viton SS 1/2" FMNPT No Motor DMH 23-200 B-SS-X/V/SS-X-F1X On request 10089.00 80.0 C





GRUNDFOS DOSING Metering PumpsDMH 280s - ALLDOS KM 280s

58

Alldos product description Installation Type Measurement Description

Material Number

List price [$ USD]

AB

C

De

live

ry

Aquaserver Wall MountedChlorine/ Chlorine dioxide/ Ozone + pH + ORP +Temperature

DIP, 1-D 2-P 3-R, W-H 96622358 3,097.00 C

Wall MountedChlorine (+pH)/ Chlorine dioxide/ Ozone/ Peroxide/Peracetic acid/ pH/ ORP/ Fluoride + Temperature

DIA-1, 1-P/R/D/HP/PA/F, W-H 96622360 2,122.00 C

Panel MountedChlorine (+pH)/ Chlorine dioxide/ Ozone/ Peroxide/Peracetic acid/ pH/ ORP/ Fluoride + Temperature

DIA-1, 1-P/R/D/HP/PA/F, P-H 96622364 2,342.00 C

Wall MountedChlorine/ Chlorine dioxide/ Ozone/ Peroxide + pH + Temperature

DIA-2, 1-D/HP, 2-P, W-H 96622369 2,347.00 C

Panel MountedChlorine/ Chlorine dioxide/ Ozone/ Peroxide + pH +Temperature

DIA-2, 1-D/HP, 2-P, P-H 96622373 2,567.00 C

Wall MountedChlorine/ Chlorine dioxide/ Ozone/ Peroxide/ Peraceticacid + pH/ ORP/ Fluoride + Temperature

DIA-2Q, 1-D/HP/PA, 2-P/R/F, Q-W-H 96609141 2,351.00 C

Panel MountedChlorine/ Chlorine dioxide/ Ozone/ Peroxide/ Peraceticacid + pH/ ORP/ Fluoride + Temperature

DIA-2Q, 1-D/HP/PA, 2-P/R/F, Q-P-H 96622390 2,571.00 C

Wall Mounted Conductivity, conductive; Temperature DIS-C, 1-CC, W-H 96725734 1,419.00 C

Wall Mounted Conductivity, inductive; Temperature DIS-C, 1-CI, W-H 96725780 1,667.00 C

Panel Mounted Conductivity, conductive; Temperature DIS-C, 1-CC, P-H 96622410 1,418.00 B

Panel Mounted Conductivity, inductive; Temperature DIS-C, 1-CI, P-H 96725790 1,666.00 C

Note: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery)


Conex Dosipos

Conex C

Controllers (Amplifiers - 120V, 50/60 Hz)

Conex Multi

Conex Duo

GRUNDFOS DOSING Metering PumpsInstrumentation

59

120V 50/60 Hz wall mounted systems Connections: PVC tube 6/12 mm or PVC pipe 12 x 1.2 mm

Capacity: 20-60 l/h (5.3 to 15.8 gph) Pressure loading valve

Min/Max inlet pressure: 0.3 to 4 bar (4.4 to 58 psi) Temperature measurement

Measuring cell body material: PMMA IP 65 protection

Alldos product description

Flow Sensor

Material measuring electrode

pH probe + buffers

ORP probe + buffers Description

Material Number

List price [$ USD]

AB

C

Delivery

x Gold x x DIP-A, D1-AU-PC-RR-QS-T, W-H 96622514 5,575.00 C

x Platinum x x DIP-A, D1-PT-PC-RR-QS-T, W-H 96622516 5,692.00 C

Gold x x DIP-A, D1-AU-PC-RR-X-T, W-H 96622519 5,471.00 C

Platinum x x DIP-A, D1-PT-PC-RR-X-T, W-H 96622522 5,587.00 C

x Gold DIA-2Q-A, D1-AU-X-QS-T, W-H 96609146 4,105.00 C

x Gold x DIA-2Q-A, D1-AU-PC-QS-T, W-H 96609148 4,377.00 A

x Gold x DIA-2Q-A, D1-AU-RC-QS-T, W-H 96609149 4,384.00 C

x Platinum x DIA-2Q-A, D1-PT-PC-QS-T, W-H 96622480 4,493.00 C

x Platinum x DIA-2Q-A, D1-PT-RC-QS-T, W-H 96622484 4,501.00 C

x Platinum DIA-2Q-A, D1-PT-X-QS-T, W-H 96622488 4,221.00 C

Gold x DIA-2Q-A, D1-AU-PC-X-T, W-H 96622492 4,274.00 C

Platinum x DIA-2Q-A, D1-PT-PC-X-T, W-H 96622496 4,391.00 C

Gold x DIA-2Q-A, D1-AU-RC-X-T, W-H 96622500 4,280.00 C

Platinum x DIA-2Q-A, D1-PT-RC-X-T, W-H 96622503 4,397.00 C

Gold DIA-2Q-A, D1-AU-X-X-T, W-H 96622506 4,000.00 C

Platinum DIA-2Q-A, D1-PT-X-X-T, W-H 96622510 4,118.00 C

x Gold x DIA-2-A, D1-AU-PC-QS-T, W-H 96622440 4,377.00 C

x Platinum x DIA-2-A, D1-PT-PC-QS-T, W-H 96622443 4,493.00 C

x Gold DIA-2-A, D1-AU-X-QS-T, W-H 96622446 4,105.00 C

x Platinum DIA-2-A, D1-PT-X-QS-T, W-H 96622449 4,221.00 C

Gold x DIA-2-A, D1-AU-PC-X-T, W-H 96622462 4,273.00 C

Platinum x DIA-2-A, D1-PT-PC-X-T, W-H 96622465 4,390.00 C

Gold DIA-2-A, D1-AU-X-X-T, W-H 96622470 4,000.00 C

Platinum DIA-2-A, D1-PT-X-X-T, W-H 96622473 4,117.00 C

x Gold x DIA-1-A, D1-AU-PC-QS-T, W-H 96622414 4,377.00 A

x Platinum x DIA-1-A, D1-PT-PC-QS-T, W-H 96622418 4,493.00 C

x Gold DIA-1-A, D1-AU-X-QS-T, W-H 96622422 4,105.00 C

x Platinum DIA-1-A, D1-PT-X-QS-T, W-H 96622425 4,221.00 C

Gold x DIA-1-A, D1-AU-PC-X-T, W-H 96622428 4,419.00 C

Platinum x DIA-1-A, D1-PT-PC-X-T, W-H 96622431 4,390.00 C

Gold DIA-1-A, D1-AU-X-X-T, W-H 96622434 4,000.00 C

Platinum DIA-1-A, D1-PT-X-X-T, W-H 96622437 4,117.00 C



Preassembled systems (pressure-proof, with cleaning motor)

AquaCell compact with Conex Multi

AquaCell compact with Conex Dosipos

AquaCell compact with Conex Duo

AquaCell compact with Aquaserver


60

120V 50/60 Hz wall mounted systems Connections: PVC tube 6/12 mm or PVC pipe 12 x 1.2 mm

Capacity: 20-60 l/h (5.3 to 15.8 gph) IP 65 protection

Min/Max inlet pressure: Pressureless Measuring cell body material: PMMA

Fluoride compact measuring system

Fluoride Conex Multi xDIA-1-A, F-X-F-X-X, W-H

96622746 8,584.00 C

Hydrogen peroxide compact measuring system

Hydrogen peroxide Conex MultiDIA-1-A, PA/HP-HP-X-X,W-H

96622762 5,781.00 C

Peracetic acid compact measuring system

Peracetic acid Conex MultiDIA-1-A, PA/HP-PA-X-X,W-H

96622749 5,557.00 C

pH, Temperature Conex Multi x xDIA-1-A, P/R-PC-X-T, W-H

96622766 3,465.00 C

pH Conex Multi xDIA-1-A, P/R-PC-X-X, W-H

96622772 3,362.00 C

ORP, Temperature Conex Multi x xDIA-1-A, P/R-RC-X-T, W-H

96622775 3,471.00 C

ORP Conex Multi xDIA-1-A, P/R-RC-X-X, WH

96622779 3,369.00 C

pH, Temperature Conex Duo x xDIA-2-A, P/R-PC-X-T, W-H

96622787 3,358.00 C

pH Conex Duo xDIA-2-A, P/R-PC-X-X, W-H

96622795 3,255.00 C

pH, TemperatureConex

Dosiposx x

DIA-2Q-A, P/R-PC-X-T, W-H

96622798 3,465.00 C

pHConex

Dosiposx

DIA-2Q-A, P/R-PC-X-X, W-H

96622801 3,362.00 C

ORP, TemperatureConex

Dosiposx x

DIA-2Q-A, P/R-RC-X-T, W-H

96622805 3,471.00 C

ORPConex

Dosiposx

DIA-2Q-A, P/R-RC-X-X, W-H

96622808 3,369.00 C


pH compactmeasuring system

Material NumberDescription

Temperature sensor

Standard solutions

Buffer solutionsMeasurement Amplifier

Alldos product description

Preassembled systems (fluoride/pH or Redox/peracetic acid or hydrogen

List price [$ USD]

AB

C

Delivery



61

120V 50/60 Hz cleaning motor Connections: PVC tube 6/12 mm or PVC pipe 12 x 1.2 mm

Capacity: 20-60 l/h (5.3 to 15.8 gph) Pressure loading valve

Measuring cell body material: PMMA Min/Max inlet pressure: 0.3 to 4 bar (4.4 to 58 psi)

Material measuring electrode

Flow Sensor

pH probe + buffers

ORP probe + buffers Measurement Description

Material Number

List price [$ USD]

AB

C

Delivery

GoldChlorine, Chlorine dioxide, Ozone

AQC-D1, AU-X-X, X-T, H 96622827 1,752.00 C

PlatinumChlorine, Chlorine dioxide, Ozone

AQC-D1, PT-X-X, X-T, H 96622830 1,869.00 C

Gold xChlorine, Chlorine dioxide, Ozone

AQC-D1, AU-X-X, QS-T, H 96622833 1,836.00 C

Platinum xChlorine, Chlorine dioxide, Ozone

AQC-D1, PT-X-X, QS-T, H 96622836 1,952.00 C

Gold x xChlorine, Chlorine dioxide, Ozone, pH

AQC-D1, AU-PC-X, QS-T, H 96622839 2,104.00 C

Platinum x xChlorine, Chlorine dioxide, Ozone, pH

AQC-D1, PT-PC-X, QS-T, H 96622842 2,220.00 C

Gold x x xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, AU-PC-RC, QS-T, H 96622845 2,378.00 C

Platinum x x xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, PT-PC-RC, QS-T, H 96622848 2,495.00 C

Gold x xChlorine, Chlorine dioxide, Ozone, Redox

AQC-D1, AU-X-RC, QS-T, H 96622852 2,109.00 C

Platinum x xChlorine, Chlorine dioxide, Ozone, Redox

AQC-D1, PT-X-RC, QS-T, H 96622859 2,227.00 C

Gold x xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, AU-PC-RC, X-T, H 96622872 2,296.00 C

Platinum x xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, PT-PC-RC, X-T, H 96622876 2,411.00 C

Gold xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, AU-PC-X, X-T, H 96622879 2,020.00 C

Platinum xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, PT-PC-X, X-T, H 96622892 2,137.00 C

Gold xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, AU-X-RC, X-T, H 96622895 2,027.00 C

Platinum xChlorine, Chlorine dioxide, Ozone, pH, Redox

AQC-D1, PT-X-RC, X-T, H 96622898 2,144.00 C


Measuring cells (AquaCell) with cleaning motor



62

Alldos product description Power supply Case pH probe ORP probe Description

Material Number

List price [$ USD]

AB

C

Delivery

x DIT-B, C, GEF, I 96609108 1,334.00 C

DIT-B, X, GEF, I 96622924 1,129.00 C

DIT-N, X, GEF, I 96622927 1,144.00 C

x DIT-N, C, GEF, I 96622928 1,349.00 C

x DIT-S, C-X-X, GEF, G 96609109 1,859.00 C

x x DIT-S, C-PT-X, GEF, G 96609120 2,197.00 C

DIT-S, X-X-X, GEF, G 96622929 1,655.00 C

x x x DIT-S, C-PT-RT, GEF, G 96622932 2,481.00 C

x x DIT-S, C-X-RT, GEF, G 96622933 2,144.00 C

x x DIT-S, X-PT-RT, GEF, G 96622934 2,276.00 C

x DIT-S, X-PT-X, GEF, G 96622935 1,993.00 C

x DIT-S, X-X-RT, GEF, G 96622936 1,939.00 C

DIT-B: Pool Water DIT-S: Drinking water DIT-N: Universal



AllconTest B

DIT photometer

AllconTest S

9V battery

9V battery

accumulator, power pack

AllconTest N


63

Installation Kits

Housing Gasket Ball Vent1/4" 96480670 45.40 A1/4" 96479881 45.40 A1/4" 96479947 53.10 A1/4" 96480674 47.70 A1/4" 96479898 45.40 A1/4" 96479948 53.10 A1/4" 96480675 60.60 A1/4" 96479899 60.60 A1/4" 96479949 68.10 A

Tube size ID OD1/4" 0.17" 1/4"3/8" 1/4" 3/8"1/2" 3/8" 1/2"

Cable and plug96527111

Control cable with plug 16 96440448 21.00 BPlug terminal without cable - 96440449 23.70 C

Control cable with plug 16 96440451 21.00 CPlug terminal without cable - 96440452 19.90 B

Control cable with plug 16 96527111 30.00 C

Relay cable with plug 16 96534215 57.80 C*Only DME 60 to 940Note - DME 2 to 48 and DMS AR versions have alarm relay cable hard-wired to pump

Leak detector

1.5 96534443 242.00 C

Wall bracket

96441202 60.60 B

Note: ABC Delivery: A within 5 working days; B within 15 Working days; C: Special order (call for expected delivery

Stop dosing input and output* 5Alarm Relay Cable* 3


DME 2 to 48, DMS PP

List Price [$USD]

Pump type MaterialMaterial Number

Pump types

DME 60 to 940

3/8"1/2"

1/4"3/8"1/2"1/4"

Number of poles Type

5Pulse, 0/4-20 mA, start/stop

Includes foot and injection valves, and tubing.Material Number

DME 2 to 48 DMS

PP

EPDM

Ceramic

FKM

PVDF

3/8"1/2"

FKM Ceramic

Leak detector

List Price [$USD]

Material Number

Length(ft)

Signal

4Dual-level or stop signal

Signal

List Price [$USD]

List Price [$USD]

Pump typeMaterials Tubing, Connections

Inner/Outer tubing diameter sizes

Material Number

Length(ft)

1/4"Suction/Discharge

ABC Delivery

ABC Delivery

ABC Delivery

ABC Delivery

GRUNDFOS DOSING Metering PumpsDME, DMS Accessories

64

Tubing

PVC 20 91127749 15.00 APVC 100 91127750 42.70 A

20 91127825 16.80 A100 91127751 58.20 A

ETFE 100 91127753 1,138.00 A20 91127826 20.40 A100 91127752 65.10 A

Foot valves

Max flow rateg/h, (l/h) Housing Gasket Ball Type ID/OD or NPT

EPDM Ceramic Tubing 0.17" x 1/4" 96480503 23.50 B

FKM Ceramic Tubing 0.17" x 1/4" 96480589 23.50 B

PVDF FKM Ceramic Tubing 0.17" x 1/4" 96480620 31.50 B1/4" x 3/8" 96480621 28.10 B3/8" x 1/2" 96479798 27.20 A1/4" x 3/8" 96479784 23.50 A3/8" x 1/2" 96480623 28.10 B1/4" x 3/8" 96479787 30.40 A3/8" x 1/2" 96479801 51.50 A

EPDM 96566136 102.00 CFKM 96566138 102.00 C

PVDF FKM 96566139 156.00 CSS FKM SS 96537921 247.00 C

EPDM 96566145 189.00 CFKM 96566146 194.00 C


Multifunction valve (DME 2 to 48, DMS pumps)Adjustable pressure range Valve body: PVDFRelief pressure: 102 to 232 psi (7 to 16 bar) Diaphragm: PTFEBack pressure: 14.5 to 58 psi (1 to 4 bar)

95704617 147.00 A95704618 129.00 C95704619 170.00 A95704620 155.00 A95704624 147.00 C95704625 128.00 C95704626 168.00 C95704627 154.00 A95704629 147.00 A95704630 124.00 C95704631 165.00 C95704635 147.00 A95704636 128.00 A95704637 164.00 C95704642 263.00 B95704643 223.00 C95704645 201.00 A


MFV M30-10 PVC/E A9145 psi(10 bar)

FKM

PVC

3/8" x 1/2" tube

PVDF PTFE1/4 x 3/8" tube1/8 x 1/4" tube

EPDM

MFV M30-10 PVC/V A9

1/4 x 3/8" tube MFV M30-10 PP/E R

1/4 x 3/8" tube

MFV M30-10 PP/V S

3/8" x 1/2" tube MFV M30-10 PVC/E S1/8 x 1/4" tube MFV M30-10 PVC/E C4

1/2" MNPT

MFV M30-10 PV/T R1/8 x 1/4" tube MFV M30-10 PV/T C4

1/2" MNPT MFV M30-10 PV/T A9

MFV M30-10 PP/E C4

PP

FKM1/4 x 3/8" tube MFV M30-10 PP/V R

1/8 x 1/4" tube MFV M30-10 PP/V C4

EPDM 3/8" x 1/2" tube MFV M30-10 PP/E S

MFV M30-10 PVC/E R

Description

1/4 x 3/8" tube MFV M30-10 PVC/V R3/8" x 1/2" tube MFV M30-10 PVC/V S

Connections

1/8 x 1/4" tube MFV M30-10 PVC/V C41/2" MNPT

Material Number

List Price [$USD]

Preset relief pressure

Connector Material Gasket

NPT 1 1/4"

248 (940) NPT 3/4"

248 (940) NPT 1 1 /4"PP

Glass

PPCeramic

Ceramic Tubing

NPT 3/4"

Ceramic Tubing

Ceramic Tubing

19 (72) DN 8PP

EPDM

FKM

FKMPVDF

4 (15) DN 4PP

Material Number

73

Size

290

Material Number

Materials Connection

1921/4 x 3/8

3/8 x 1/2

List Price [$USD]

Inner/outer diameter(in)

MaterialMaximum pressure

(psi)Length

(ft)ABC

Delivery

ABC Delivery

ABC Delivery


PE 123

List Price [$USD]

0.17 x 1/4 85

PE


65

Injection valves

Max flow rateg/h, (l/h) Housing Gasket Ball Type ID/OD or NPT

EPDM Ceramic Tubing 0.17" x 1/4" 96480641 28.10 C

FKM Ceramic Tubing 0.17" x 1/4" 96480642 28.10 B

PVDF FKM Ceramic Tubing 0.17" x 1/4" 96480643 37.10 C1/4" x 3/8" 96479805 28.10 A3/8" x 1/2" 96480645 28.10 B1/4" x 3/8" 96479806 28.10 A3/8" x 1/2" 96479808 28.10 A1/4" x 3/8" 96479807 37.10 A3/8" x 1/2" 96479809 37.10 A

EPDM 96566142 163.00 CFKM 96566143 163.00 C


EPDM 96566148 302.00 CFKM 96566149 308.00 C


Dosing Monitor

Max pressure: 145 psi (10 bar) PP/EPDM 96655216 290.00 C

Max viscos 500 cps PP/FKM 96655217 290.00 C

Max liquid temperature: 122°F (50°C) PP/EPDM 96655218 290.00 C

Sensor mounts directly to pump discharge. PP/FKM 96655219 290.00 CPP/EPDM 96655230 373.00 CPP/FKM 96655231 373.00 A

PP/EPDM 96655232 533.00 CPP/FKM 96655233 533.00 C

*Not available for DME 2.

Level control unit

Level sensor kit PVC 96295882 87.00 A


DME 375 to 940

8.2 (2.5) 50 V, 0.5 A

Model MaterialLength of cable

ft (m)List Price

[$USD]Material Number

Maximum load of contacts

Ceramic Tubing

GlassNPT 1 1/4"

CeramicNPT

FKM

248 (940) NPT 3/4"PP

19 (72) DN 8PP

PVDF

EPDM

FKM

List Price [$USD]

Connection Material Number

Ceramic Tubing

Ceramic Tubing

3.2 (12) DN 4PP

SizeMaterials

Material Number

3/4"

248 (940) NPT 1 1 /4"PP

ABC Delivery


ABC Delivery

ABC Delivery

List Price [$USD]

MaterialsPump types

DME 4 to 19, DMS 4 to 12*

DME 48

DME 60 to 150


66

Flow Indicator

Max pressure Max flowpsi (bar) g/h (l/h) Body145 (10) 11.9 (45) PVC, PVDF 96446763 29.10 C

Adjustable rigid suction line with level sensors

Maximum length Level cable(in) length ID OD

21 PVC 5 ft 1/4 3/8 96479974 103.00 C

31 PVC 5 ft 1/4 3/8 96479975 103.00 C

35 PVC 5 ft 3/8 1/2 96480000 124.00 C1/4 3/8 96479973 103.00 C3/8 1/2 96479999 124.00 C

49 PVC 5 ft 1/4 3/8 96480733 121.00 C

Automatic vent valve115V, 60 Hz

Body Valve seat O-ring BallYes 96616029 424.00 CNo 96616028 289.00 C

Automatic vent valve available for DME 60, max. flow 48 lph; adapter is needed.

Body/Seat

PP/E 96654631 42.80 CPP/V 96654633 45.00 BPV/E 96654635 91.00 CPV/V 96654634 91.00 C


60 (16)

Suction tubing size

PP or PVDF DME 2 to 48, DMS

Material Number

Material

FKMGaket

List Price [$USD]

Material Number

PVC 5 ft

Timer

List Price [$USD]

List Price [$USD]

Material Number

Materials

PP or PVDFPVDF FKM Ceramic

DME 2 to 48, DMSPVC

500 (132)44

1000 (264)

Pump type

ABC Delivery

ABC Delivery

ABC Delivery


Grundfos tank sizeLiters (US Gallons)

200 (53)300 (79)

MaterialsPump type

AdaptorAdaptorAdaptorAdaptor Kit adapter M30x3.5/DME 3

Material Number

List Price [$USD]

ABC DeliveryDescription

Kit adapter M30x3.5/DME 3Kit adapter M30x3.5/DME 3Kit adapter M30x3.5/DME 3


67

Tank

16 96688082 118.00 A26 91836501 232.00 C53 96690348 255.00 A79 96441296 497.00 C132 96690349 643.00 C264 96688086 1,345.00 C

*Without pump mounting holes

Mounting accessories PumpsPump mounting plate 96582199 58.40 BPump mounting plate 96446766 61.90 CFloor mounting bracket (set of four) 96446767 37.10 CAdapter plate 96587931 107.45 C

Square tank

26 Square PE 96489271 171.00 CTank is ready for single or parallel mounting of DME 2 to 48, DMS pumps.

Connection kits2 connections per kit

From To96560564 48.40 C96560570 59.60 C91128441 32.50 A91128442 35.60 A91128437 33.00 A91128438 37.10 A91128439 33.20 A91128440 39.10 A96637161 43.90 B96608415 46.10 C96608417 51.70 C96537892 46.10 C96537894 58.40 C96731912 39.40 A96731901 89.90 B96537893 48.40 C96537895 86.60 C

Union nut kits (2 nuts per kit)2 nuts per kit

91129724 49.60 A91129725 55.60 A96731918 61.90 B96633937 48.40 C96633938 53.90 C96731917 56.70 B96731916 55.10 C96731915 74.20 C96731914 121.00 C


PVDF

DME 375 and 940

PP

SS

PP

SSPVDF

DME 60 and 150

PP

SS

PVDF

DME 2 to 48, DMS tubing connections

0.17" ID 1/4" OD

1/4" ID 3/8" OD

3/8" ID 1/2" OD

PPPVDF

PPPVDF

SS

Material

PPPVDF

PVCSS

PPPVDF

PVCSS

(6-week lead time)

(6-week lead time)

Tank sizeLiters

500*1000*

200300*

Type

Cylindrical

Gallons

60100

Material Number

List Price [$USD]

MaterialConnection

List Price [$USD]

Material Number

List Price [$USD]

29346086

Material Number

100

Weightlbs34

Gallons Type MaterialTank size

Liters

3/4" FNPT

Material

PE

PPPVDF

Weightlbs1016

DME 2 to 12, DMS

Pump type

PP or PVDFDME 2 to 48, DMS

M30 x 3.5 union nut

1/2" MNPT

ABC Delivery


DME 2 to 48, DMS SS

DME 2 to 48, DMS

DME 60 and 150

Pump type

3/8" FNPT

DME 375 and 940 1 1/4" FNPT

ABC Delivery

ABC Delivery

ABC Delivery

DME 19 to 48

DDI/DMI Alldos Pumps

Material Number

List Price [$USD]

PPPVDF


68

Installation kits

Material

SingleLevel

ControlTubing

ConnectionsInjector

Connection

AlldosPart

Number

GrundfosMaterialNumber

List Price[$ USD]

ABC Delivery

PP No 4/6 mm (1/4") 1/4" NPT 553-070 91835808 51.70 C

PVC No 4/6 mm (1/4") 1/4" NPT 553-0701 91835809 51.70 B

PP Yes 4/6 mm (1/4") 1/4" NPT 553-071 91835810 104.00 C

PVC Yes 4/6 mm (1/4") 1/4" NPT 553-0711 91835811 96.60 B

PVDF No 4/6 mm (1/4") 1/4" NPT 96795848 72.20 B

PVC No 6/12 mm 1/2" NPT 553-1016 91835824 75.30 C

PVC Yes 6/12 mm 1/2" NPT 553-1017 91835825 120.00 C

PP No 6/12 mm 1/2" NPT 553-1018 91835826 75.30 C

PP Yes 6/12 mm 1/2" NPT 553-1019 91835827 120.00 C

PVDF No 3/8" 1/4" NPT 96795849 139.00 B

Cables and connectors

Type Length (ft)

AlldosPart

Number


List Price[$ USD]

ABC Delivery

Cable with 15 321-207 96609016 33.70 B

connector 6 321-205 96609014 31.50 B

Cable with 15 321-208 96609019 33.70 A

connector 6 321-206 96609017 31.50 B

Cable with 6 321-215 96632921 33.70 A

connector 16 321-216 96632922 37.10 A

Connectoronly

_ 321-210 96609030 31.50A

Cable with

connector

96609030 31.50 A

Tubing

MaterialIDxODSize Length (ft)

Maxpressure

(psi)

AlldosPart

Number


List Price[$ USD]

ABC Delivery

PE 4/6 mm (1/4") 3 217 526-005 91835675 1.20 B

PE 4/6 mm (1/4") 9 217 526-005/03 91835676 3.40 C

PE 4/6 mm (1/4") 15 217 526-005/05 91835677 4.50 C

PE 4/6 mm (1/4") 30 217 526-005/10 91836504 9.00 B

PE 4/6 mm (1/4") 45 217 526-005/15 91835678 13.50 C

PE 4/6 mm (1/4") 75 217 526-005/25 91835679 22.50 C

PE 4/6 mm (1/4") 150 217 526-005/50 91835680 43.90 C

PE 4/6 mm (1/4") 300 217 526-005/100 91836303 87.60 B

PVC 4/6 mm (1/4") 100 526-021/100 91835681 117.00 C

PE 6/12 mm 3 334 526-022 91835682 4.50 B

PE 6/12 mm 15 334 526-022/05 91835683 22.50 C

PE 6/12 mm 30 334 526-022/10 96653571 43.90 B

PE 6/12 mm 75 334 526-022/25 91835685 111.00 C

PE 6/12 mm 150 334 526-022/50 91835686 220.00 C

PE 8/14 mm 3 526-131 91835687 4.50 B

PVC 8/14 mm 30 145 526-133 91835688 71.80 C

PE 10/14 mm 3 116 526-137 91835689 5.70 B

* Different tube and cable lengths available upon request


DN8

DMX, DMH with wall mounted controls for leak detection

Leak detection (DBI) + Dosing Controller. (5 pole)

DN8

Description

Control cable, Pulse, 4-20 mA, start/stop

Etron-Profi Control cable-signal-stroke-tank lvl-error (used on variant AR pumps, except DMI)

DN8

DN8

DN8

DN4 - DDI 209, DMI

DN4 - DDI 209, DMI

DN4 - DDI 209, DMI

DN4 - DDI 209, DMI

DN4 - DDI 209, DMI

DN4

DN4

DN4

Description

DN4

DN4

DN4

DN4

DN4

DN4

DN8

DN8

DN8

DN8

DN 4 PVC tubes are not suitable as discharge lines. Use

DN8

DN8

DN8

DN8


B

Splitting plug (4-20 output + Flow Monitor (AF versions)

71.9096609032321-22315(DBI)+Dosing Controller (5 pole)

DDI control cable-signal 4-20 output

Description

GRUNDFOS DOSING Metering PumpsDDI, DMI, DMX, DMH Accessories

69

Foot valves Max flow

rategph (l/h) Material Size

Connectiontype

Connectionsize

LevelSensors

Line / Cablelength (ft)

AlldosPart

Number


List Price[$ USD]

ABC Delivery

1.58 PVC/G DN8 DN8 4/6 mm (1/4") None No Tubing 531-0130-10000 96728445 30.00 C

3.2 (12) PVC DN4 Tube- PVC 4/6 mm (1/4") - No Tubing 531-0100-10001 91835741 27.00 A

3.2 (12) PVC DN4 Tube- PE 4/6 mm (1/4") - No Tubing 531-0100-10005 91835742 27.00 C

3.2 (12) PVC DN4 Tube 4/6 mm (1/4") Empty 4.5 / 6 531-0101-10001 96628548 68.60 C

3.2 (12) PVDF DN4 Tube 4/6 mm (1/4") Empty 3.5 / 6 521-029 91835646 129.00 C

3.2 (12) PVC DN4 Tube-PE 4/6 mm (1/4") Low/Empty 4.5 / 6 531-0102-10000 96632989 85.40 A

3.2 (12) PVC DN4 Tube-PVC 4/6 mm (1/4") Low/Empty 4.5 / 6 531-0102-10002 91835750 85.40 C

3.2 (12) PVC DN4 Tube 4/6 mm (1/4") Low/Empty 4.5 / 6 531-0102-10003 91835751 85.40 C

13.2 (50) PVC DN8 Tube 6/12 mm - - 531-0200-10000 91835757 28.10 A

13.2 (50) PVC DN8 Tube 6/12 mm Empty 4.5 / 6 531-0201-10000 96376425 71.70 B

13.2 (50) PVC DN8 Tube 6/12 mm Low/Empty 4.5 / 6 531-0202-10000 91835760 87.60 C

3.2 (12) PP DN4 Tube-PE 4/6 mm (1/4") - - 531-0100-10006 91835743 27.00 C

3.2 (12) PP DN4 Tube-PVC 4/6 mm (1/4") - - 531-0100-10011 91835744 27.00 C

3.2 (12) PP DN4 Tube 4/6 mm (1/4") Empty 4.5 / 6 531-0101-10011 91835748 68.60 C

3.2 (12) PP DN4 Tube 4/6 mm (1/4") Low/Empty 4.5 / 6 531-0102-10010 on request 79.80 C

13.2 (50) PP DN8 Tube 6/12 mm - - 531-0200-10004 91836277 28.10 B

13.2 (50) PP DN8 Tube 6/12 mm Empty - 531-0201-10001 91835758 70.80 B

13.2 (50) PP DN8 Tube 6/12 mm Low/Empty 4.5 / 6 531-0202-10004 on request 81.09 C

13.2 (50) PVDF DN8 Tube 1/2" - - 521-027 96633437 92.10 C

13.2 (50) PVDF DN8 NPT 1/2" - - 64.5004-010 91835990 154.00 B

* Different tube and cable lengths available upon request

Injection valves

Material SizeConnection

size

Maxflow rategph (l/h)

Maxpressure

(psi)

AlldosPart

Number


List Price[$ USD]

ABC Delivery

PVC/V DN4 1/4" NPT 3.2 (12) 145 522-4092 95703300 26.80 B

PP/V DN4 1/4" NPT 3.2 (12) 145 522-4093 95703302 26.80 C

PP/V/G DN4 1/2" NPT 3.2 (12) 145 522-0041 95704981 42.20 B

PV/T PE 1/2" NPT 3.2 (12) 145 522-413 96688281 133.20 C

1/2" tubing Lip valve PP/V/G DN8 1/2" NPT 3.2 (12) 145 522-495 96688299 77.60 C

PVC/V/G DN4, DN8 1/2" NPT 3.2 (12) 145 5220203-10008 95706132 105.45 C

Hastelloy C DN8 1/2" NPT 13.2 (50) 1450 522-4312 on request 664.00 C

1/2" tubing Lip valve PVC/V/G DN8 1/2" NPT 13.2 (50) 145 522-4311 96688290 77.60 A

PV/T/T DN8 1/2" NPT 13.2 (50) 232 522-4151 96688296 133.20 B

SS DN20 1" NPT 106 (400) 1450 522-4811 96727298 489.00 C

PVC DN20 1" NPT 106 (400) 145 522-4411 on request 350.00 C

PVDF DN20 1" NPT 106 (400) 145 522-4161 on request 543.00 C

* Different connections and materials available upon request

Wall brackets/consoles (with attachment hardware)AlldosPart

Number


List Price[$ USD]

ABC Delivery

539-006 96612010 51.40 C

539-029 91836471 150.00 B

539-015 91835765 150.00 C

539-026 91835766 164.00 C

539-027 96728844 177.00 C

539-033 96623672 143.00 B


Simplex DMH 251, 252 PP

Material

DMI, DDI 209 PVC

DDI 222 PP

DMX 221 Steel

Steel

3/4" NPT

Steel

Simplex DMX 226

Duplex DMX 226

Description

3/4" NPT

4/6 mm

4/6, 6/12 mm 1/2" tubing

1/2" NPT

4/6 mm


1/2" NPT

3/4" NPT

Inlet Connection

4/6 mm

4/6 mm


70

Back pressure valves

Max flow rategph (l/h) Material

AlldosPart

Number

Grundfos Material Number

List Price[$ USD]

ABC Delivery

100 (379) PVC .BPT025-P 91836132 161.00 B

300 (1136) PVC .BPG050-P 91836135 297.00 B

300 (1136) PVC .BPG075-P 91836141 329.00 B

1200 (4542) PVC .BPG150-P 91836148 934.00 B

300 (1136) PP .BPG050-PP 91836908 311.00 B

300 (1136) PP .BPG075-PP 91836909 338.00 B

1200 (4542) PP .BPG150-PP on request 922.00 C

100 (379) PVDF .BPT025-K 91836134 345.00 B

300 (1136) PVDF .BPG050-K 91836140 503.00 B

300 (1136) PVDF .BPG075-K 91836144 669.00 B

1200 (4542) PVDF .BPG150-K 91836150 2195.00 B

100 (379) SS .BPT025-S 91836133 449.00 B

300 (1136) SS .BPG050-S 91836138 584.00 B

300 (1136) SS .BPG075-S 91836142 602.00 B

1200 (4542) SS .BPG150-S 91836149 1974.00 B

2350 (8896) SS .BPG200-S 91836153 2063.00 B

Pressure relief valves

Max flow rategph (l/h) Material

AlldosPart

Number


List Price[$ USD]

ABC Delivery

100 (379) PVC .PRT025-P 91836172 182.00 B

300 (1136) PVC .PRG050-P 91836176 325.00 B

300 (1136) PVC .PRG075-P 91836180 354.00 B

1200 (4542) PVC .PRG150-P 91836186 934.00 B

300 (1136) PP .PRG075-PP 91836910 355.00 B

1200 (4542) PP .PRG150-PP on request 922.00 C

2350 (8896) PP .PRG200-PP on request 1041.00 C

100 (379) PVDF .PRT025-K 91836175 374.00 B

300 (1136) PVDF .PRG050-K 91836179 656.00 B

300 (1136) PVDF .PRG075-K 91836182 684.00 B

1200 (4542) PVDF .PRG150-K 91836187 2195.00 B

100 (379) SS .PRT025-S 91836173 466.00 B

300 (1136) SS .PRG050-S 91836177 628.00 B

300 (1136) SS .PRG075-S 91836181 651.00 B

1200 (4542) SS .PRG150-S 91836188 1974.00 B

* Different connections and materials available upon request

Dosing controllersAlldosPart

Number


List Price[$ USD]

ABC Delivery

334-105 91835305 448.00 B

334-106 91835306 483.00 B

334-101 91835299 448.00 C

334-102 91835300 483.00 B

334-1031 91835302 602.00 B

334-1041 91835304 760.00 B

334-103 91835301 548.00 B

334-104 91835303 672.00 B


PVDF

PVDF

PVC

PVDF

PVC

PVC

Material

ConnectionSize

1/4" NPT

PVC

PVDF

1 1/2" NPT

1/4" NPT

1/2" NPT

1/4" NPT

1/2" NPT

3/4" NPT

1 1/2" NPT

1/2" NPT

3/4" NPT

1 1/2" NPT

1/4" NPT

1/2" NPT

DMX 4-10, 8-10

3/4" NPT

1 1/2" NPT

3/4" NPT

1 1/2" NPT

2" NPT

1/4" NPT

1/2" NPT

3/4" NPT

1 1/2" NPT

1/4" NPT

3/4" NPT

Pump

DMX 4-10, 8-10

1/2" NPT

3/4" NPT

1 1/2" NPT

2" NPT

Connection Size


1/2" NPT

DMX 35-10, 115-3

DMX 39-4, 115-3

DMX 9-10, 35-10

DMX 17-4, 25-3

DMX 50-10

DMX 50-10

3/4" NPT

1 1/2" NPT


71

Union Type Back Pressure Valves

Primary Fluid Part Number Material

Max Flow Rate @ 150 psig

USGPMMax Pressure

(psi)


List Price [$ USD]

ABC Delivery

ECO Valve 25 (1/4")PVC 35 150 On Request $177.00 B

PP 35 150 On Request $180.00 B

PVDF 35 150 On Request $333.00 B










ECO Valve 100 (1")PVC 60 150 On Request $400.00 B



Calibration Cylinders PVC

Material Size (ml)Max Flow Rate

gph (l/h)Max Pressure

(psi)


List Price [$ USD]

ABC Delivery

PVC 100 ml 1.6 (6.05) N/A On Request $38.00 B

PVC 250 ml 4 (15.14) N/A On Request $45.00 B








1/2"

1/4"

1/4"

2" NPT, Bottom Conn

1/2"

1/2"

3/8"

1/2" NPT, Bottom Conn

1" NPT, Bottom Conn

1" NPT, Bottom Conn

2" NPT, Bottom Conn

ConnectionSize




ECO -75G

1"


1"

1"

ConnectionSize

1/4"

ECO -25G

ECO -75G

3/4"

3/4"

3/4"

3/8"

ECO -38G

3/8"

ECO -50G


72

Multifunction valve

Adjustable pressure range Valve body: PVDFRelief pressure: 102 to 232 psi (7 to Diaphragm: PTFEBack pressure: 14.5 to 58 psi (1 to 4 bar)

DMI, DDI (0.4 to 6 LPH) [DN4 (G 3/8") inlet connection]

95704522 156.00 C95704523 156.00 B95704524 177.00 A95704525 166.00 C95704529 156.00 C95704530 156.00 C95704531 177.00 C95704532 166.00 C95704534 156.00 C95704535 156.00 C95704536 177.00 C95704540 156.00 C95704541 156.00 C95704542 177.00 C95704547 268.00 C95704548 268.00 C95704550 279.00 C

FKM 95704553 166.00 CEPDM 95704555 166.00 C

PE 95704561 279.00 A

95704566 147.00

95700954 27.00 C

95700955 27.00 A

DDI (13 to 150 LPH), DMX, DMH [DN8 (G 5/8") inlet connection]

95704569 156.00 C95704570 156.00 A95704571 177.00 C95704572 166.00 C95704576 156.00 C95704577 156.00 C95704578 177.00 C95704579 166.00 C95704581 156.00 C95704582 156.00 C95704583 177.00 C95704587 156.00 C95704588 156.00 C95704589 177.00 C95704594 268.00 C95704595 268.00 C95704597 279.00 C

FKM 95704601 166.00 AEPDM 95704603 166.00 CPTFE 95704609 279.00 C


G 5/8"x10 MFV 6 5/8-10 PVC/V U1

PVDF PTFEMFV 5/8-10 PV/T RMFV 5/8-10 PV/T C4

1/2" MNPT MFV 5/8-10 PV/T A9

1/4 x 3/8" tube1/8 x 1/4" tube

MFV 5/8-10 PVC/E SMFV 5/8-10 PVC/E C4MFV 5/8-10 PVC/E A9

MFV 5/8-10 PP/E SMFV 5/8-10 PP/E C41/8 x 1/4" tube

3/8" x 1/2" tube

1/8 x 1/4" tube1/2" MNPT

EPDMMFV 5/8-10 PP/E R

1/8 x 1/4" tube1/4 x 3/8" tube

FKMMFV 5/8-10 PP/V RMFV 5/8-10 PP/V SMFV 5/8-10 PP/V C4

1/4 x 3/8" tube

3/8" x 1/2" tube

145 psi (10 bar)

PVC

FKM

MFV 5/8-10 PVC/V RMFV 5/8-10 PVC/V SMFV 5/8-10 PVC/V C4MFV 5/8-10 PVC/V A9

EPDM

MFV 5/8-10 PVC/E R

PP

Material Number

List Price [$USD]

MFV 3/8-16 PVC/V A91/2" MNPT MFV 3/8-16 PVC/E A91/2" MNPT MFV 3/8-16 PV/T A9

232 psi (16 bar) PVC

PVDF

1/2" MNPT

PVDF PTFE1/4 x 3/8" tube MFV 3/8-10 PV/T R1/8 x 1/4" tube MFV 3/8-10 PV/T C4

1/2" MNPT MFV 3/8-10 PV/T A9

EPDM1/4 x 3/8" tube MFV 3/8-10 PP/E R3/8" x 1/2" tube MFV 3/8-10 PP/E S1/8 x 1/4" tube MFV 3/8-10 PP/E C4

1/2" MNPT MFV 3/8-10 PVC/E A9

PP

FKM1/4 x 3/8" tube MFV 3/8-10 PP/V R3/8" x 1/2" tube MFV 3/8-10 PP/V S1/8 x 1/4" tube MFV 3/8-10 PP/V C4

List Price [$USD]

1/2" MNPT MFV 3/8-10 PVC/V A9

EPDM

1/4 x 3/8" tube MFV 3/8-10 PVC/E R3/8" x 1/2" tube MFV 3/8-10 PVC/E S1/8 x 1/4" tube MFV 3/8-10 PVC/E C4

MFV 3/8-10 PVC/V C4

Material Number

Connections Description

145 psi (10 bar)

PVC

FKM

1/4 x 3/8" tube MFV 3/8-10 PVC/V R3/8" x 1/2" tube MFV 3/8-10 PVC/V S1/8 x 1/4" tube

232 psi (16 bar)PVC

1/2" MNPT MFV 5/8-16 PVC/V A91/2" MNPT MFV 5/8-16 PVC/E A9

PVDF 1/2" MNPT MFV 5/8-16 PV/T A9

1/4 x 3/8" tube3/8" x 1/2" tube

1/8 x 1/4" tube1/2" MNPT

1/4 x 3/8" tube3/8" x 1/2" tube

FKM

EPDM

PVC extension for Plus3 heads:

Description

ABC Delivery

ABC Delivery



Connector Material

Gaskset Connections


Connector Material

Gaskset


73

Elextrical Actuators (AT5 option on DMX/DMH pumps)Grundfos Material Number

List Price[$ USD]

ABC Delivery

91836334 2133.00 B

91835326 2006.00 C

96624728 2147.00 C

91835321 1986.00 C

91835322 1986.00 C

91835324 2006.00 C

Motors TEFC AC 1725 RPM

Pump model Type HP Phase Voltage CommentAlldos Part

Number


List Price[$ USD]

ABC Delivery

1/4 1 115-230 KL3403 91836042 312.00 B

1/4 3 208-230/460 KM3454 91836043 283.00 B

1/3 1 115-230 X-proof, class I, Grp D VL5001A 91836036 640.00 B

1/2 1 115-230 VL3504 91836048 372.00 B

1/2 3 208-230/460 VM3538 91836037 353.00 B


3/4 1 115-230 VL3507 91836049 426.00 B

3/4 3 208-230/460 VM3542 91836053 374.00 B


1 1/2 1 115-230 VL3514T 91836050 560.00 B

1 1/2 3 208-230/460 VM3554T 91836038 448.00 B

1 1/2 3 208-230/460 X-proof, class I, Grp D VM7034T 91836055 925.00 B

2 1 115-230 VL1322T 91836047 646.00 B

2 3 208-230/460 VM3558T 91836054 470.00 B

2 3 208-230/460 X-proof, class I, Grp D VM7037T 91836056 999.00 B

Motor and Drive Selection ChartMotors TEFC AC 1725 RPM

Pump model Type HP Phase Voltage CommentGrundfosAlldos PN

List Price[$ USD]


List Price[$ USD]

ABC Delivery

96899593 511.00 96899601 479.00 C

X-proof 96899594 773.00 96899601 479.00 C

96899595 532.00 96899602 497.00 C

X-proof 96899596 1032.00 96899602 497.00 C

96899597 608.00 96899603 622.00 C

X-proof 96899598 1191.00 96899603 622.00 C

96899599 642.00 96899603 622.00 C

X-proof 96899600 1302.00 96899603 622.00 C


C

208-230/460

208-230/460

208-230/460

DMH 255/283/288 Simplex

DMH 257 Simplex 1-1/2 3

3/4

208-230/460

3

DMH 254 Simplex 1/2 3

DMH 285/286/287 Duplex 2 3

VFD

96899601 479.0096899592 423.00DMH 251/252/253

DMH 280/281Simplex 1/4 208-230/4603

DMX 226DMH 251/252/253

DMH 280/281Simplex

DMH 254 up to gph Simplex

DMH 255/283/288 Simplex

DMH 257DMH 285/286/287

Simplex

Duplex


DMH 251-252-253

DMH 254-255-283

DMH 285-286-287

Pump Type

DMX 221

DMX 226M

DMX 226L


74

Connectors

Type Size (DN) Material

Maxpressure

(psi)Alldos Part

Number


List Price[$ USD]

ABC Delivery

1/2" MNPT fitting 4 PVC 145 529-217 91835722 21.20 A

1/8" x 1/4" tube fitting (1/4" heavy wall) 4 PVC 232 529-472 91836500 15.20 A

0.17 x 1/4" tube fitting (1/4" thin wall) 4 PVC 145 529-004 91835692 5.90 B

1/4 x 3/8" tube fitting 4 PVC 145 529-571 91836519 23.70 B

3/8 x 1/2" tube fitting 4 PVC 145 96795240 52.10 B

DN4 to DN8 adaptor 4 PVC 145 10.4277-400 91834125 43.60 A

DN4 to DN8 adaptor 4 PP 145 10.4277-404 91836488 43.60 B

DN4 to DN8 adaptor 4 PVDF 145 10.4277-401 91834127 80.30 C

adapter R 3/8" female to 1/2" NPT male 4 SS 145 529-204 91835716 53.00 C

R 3/8" female to 1/4" tubing 4 PVDF 145 529-013 91835694 50.60 C

R 1/4" m. to 1/4" tub. for press. retention valve 4 PVDF 145 529-016 91835695 37.70 C

0.17 x 1/4" tube fitting (1/4" thin wall) 4 PP 145 529-049 91835705 5.90 C

0.25 x 1/4" tube fitting (1/4" heavy wall) 4 PP 232 529-198 91836413 20.20 B

Connector - DN 4 PV to 1/8 x 1/4in. tub 4 PVDF 232 529-199 91836414 80.90 B

1/4 x 3/8" tube fitting 4 PP 145 529-470 91836449 20.20 B

adapter R1/4" m. to 1/4" NPT. f. back pressure valve 4/8 SS 145 529-205 91835717 34.10 C

1/2" tubing connector, US 8 PVC 145 529-044 91835703 45.90 A

1/2" MNPT fitting 8 PVDF 145 529-206 91835718 84.70 A

1/4" NPT for pipe 8 Hast. C 1450 529-209 91835720 168.00 C

1/2" MNPT fitting 8 PVC 145 529-207 91835719 36.50 B

Insert DN 8, threated 1/4" NPT female 8 PVC 145 10.4573-403 91834135 32.00 C

Adapter DN 8 to 1/2" NPT 8 SS 2900 10.1011-406 91834002 68.00 C

3/8 x 1/2" tube fitting 8 PVC 145 529-201 91835713 23.70 B

1/4" NPT female for pipe 8 SS 1450 529-203 91835715 58.90 A

Connector - DN 8 PVC to 232 psi 6/12mm 8 PVC 232 529-001 91835690 11.80 C

Connector - DN 8 PVC 232 psi to 6/12 8 PVC 232 529-039 91835701 13.00 A

Connector - DN 8 PP to 6/12 8 PP 232 529-048 91835704 9.40 C

1/4" FNPT fitting 8 PVC PE 529-202 91835714 11.80 C

1/4 x 3/8" tube fitting 8 PVC 145 529-200 91836415 28.10 A

1/4 x 3/8" tube fitting 8 PVDF 145 529-211 91836416 84.30 B



DN20 to DN8 adaptor 20 PP 145 10.997-43 91834641 59.20 C

3/4" MNPT fitting 20 PVC 145 529-223 91835723 34.10 B

DN20 to DN8 adaptor 20 PVC 145 10.997-41 91834639 56.70 C

3/4" NPT female for pipe 20 SS 1450 529-225 91835724 55.30 C

3/4" MNPT fitting 20 PVDF 145 529-228 91835726 156.00 C

DN20 to DN8 adaptor 20 PVDF 145 10.997-44 91834642 141.00 C

Connector - DN 20 Hast C to 3/4in FNPT 20 Hast. C 1450 529-226 91835725 184.00 C

Connector - DN 32 SS 1 1/4in NPT 32 SS 232 529-449 91835729 102.00 C

Connector - DN 32 PVC 1 1/4in NPT 32 PVC 145 529-450 91835730 42.40 C

Flow monitor extension piece - PVC PVC 145 529-457 91835731 33.00 C

Plus3 connection piping 4 PVC/V 145 553-1506 91835909 33.00 C

Plus3 connection piping 4 PVC/E 145 553-1507 91835910 33.00 C




75

METRIC

1/4" Thin wall 1/4" Thick wal 3/8" 1/2" 1/4" 1/2" 3/4" DN8

0.17"x 0.25" 0.12"x0.25" 0.25x0.375 0.375x0.50 NPT NPT NPT Metric

91835692 91836500 91836519 96795240 91835722 91834125

91836415 91835713 91835714 91835719 91834012

91835723 91834639

METRIC



91835705 91836413 91836449 91836488

91836453 91836450 96679326

91834641

METRIC



91836500 91834126

91836416 91835718 91834014

91835726 91834642

PEMETRIC

DN8

Metric

91835716

91834002 96693918 91834013

91835724 91834640


Metric to US Adaptors

TO

PIPE FNPTPIPE MNPT

TO

TUBING PIPE

PVC

FR

OM

1/4" 1/2"

PVDFTUBING PIPE

1/4" 1/2" 3/4"TO

TO

PPTUBING PIPE

DN4

DN8

DN20

SS

3/4"

FR

OM

DN4

DN8

DN20

FR

OM

DN4

DN8

DN20

FR

OM

DN4

DN8

DN20


76

Pulsation Dampeners

Pump model

Maxpressure

(psi)Volume(cu in) Material Gaskets Diaphragm Connection

AlldosPart

Number


List Price[$ USD]

ABC Delivery

145 0.08 PVC Viton PTFE 3/8" NPT CTP1010T 91836114 465.00 B

145 0.08 PVC Viton Viton 3/8" NPT CTP1010V 91836115 265.00 B

300 0.16 SS 316 Viton PTFE 3/8" NPT CTS1020T 91836117 792.00 B

300 0.16 SS 316 Viton Viton 3/8" NPT CTS1020V 91836118 591.00 B

145 0.08 PP Viton PTFE 3/8" NPT CTP1000T 91836112 465.00 B

145 0.08 PP Viton Viton 3/8" NPT CTP1000V on request 265.00 C

145 0.08 PVDF PTFE PTFE 3/8" NPT CTK1000T 91836110 535.00 B

145 0.08 PVDF PTFE Viton 3/8" NPT CTK1000V 91836111 333.00 B

145 36 PVC Viton PTFE 3/4" NPT CT1311T 91836087 966.00 B

145 36 PVC Viton Viton 3/4" NPT CT1311V 91836088 637.00 B

300 36 SS 316 Viton PTFE 3/4" NPT CT3120T 91836103 1340.00 B

300 36 SS 316 Viton Viton 3/4" NPT CT3120V 91836104 1012.00 B

145 36 PP Viton PTFE 3/4" NPT CT1301T on request 966.00 C

145 36 PP Viton Viton 3/4" NPT CT1301V 91836083 637.00 B

145 36 PVDF PTFE PTFE 3/4" NPT CT1401T 91836089 1210.00 B

145 36 PVDF PTFE Viton 3/4" NPT CT1401V 91836091 883.00 B

145 85 PVC Viton PTFE 3/4" NPT CT311T 91836099 943.00 B

145 85 PVC Viton Viton 3/4" NPT CT311V 91836100 615.00 B

300 85 SS 316 Viton PTFE 3/4" NPT CT3020T 91836097 1418.00 B

300 85 SS 316 Viton Viton 3/4" NPT CT3020V 91836098 1107.00 B

145 85 PP Viton PTFE 3/4" NPT CT301T 91836093 980.00 B

145 85 PP Viton Viton 3/4" NPT CT301V 91836094 651.00 B

145 85 PVDF PTFE PTFE 3/4" NPT CT401T 91836105 1225.00 B

145 85 PVDF PTFE Viton 3/4" NPT CT401V 91836106 896.00 B

145 175 PVC Viton PTFE 2" NPT CT911T 91836107 1650.00 B

145 175 PVC Viton Viton 2" NPT CT911V 91836108 860.00 B

145 175 PP Viton PTFE 2" NPT CT901T on request 1649.00 C

145 175 PE Viton Viton 2" NPT CT901V on request 859.00 C

145 175 PVDF Viton PTFE 2" NPT CT1201T on request 2251.00 C

145 175 PVDF Viton Viton 2" NPT CT1201V 91836081 1460.00 B

150 175 SS 316 Viton Viton 2" NPT CT2500V 91836092 1436.00 B


DMH 257


DMIDMX 221 (heads 1-4)

DMH 251/252SS DMH

280/281/283/287

DMX 221 (heads 5, 6)DMX 226 (head 1)

DMH 253

DMX 226 (heads 2-4)DMH 254/255, SS 286


77


DME 60 – 940

19

2

36

3

12 1011

9876

6a

5

27

4

DME, DMS 2 – 48

12

11

10

9

8

7

6

4a

4

3

27

1 35

5

36

1415

18

2

19

NOTE: Some referenced position numbers may not be available as individual items (see complete kit).

For contents of kits, see WebCAPS.

GRUNDFOS DOSING Metering PumpsDME/DMS Service Kits

78

MATERIAL LISTNUMBER DESCRIPTION PRICE ($)

Valve Kit (Includes suction and discharge valves)96440711 Valve Kit, DME/S2-DME48 PP/E/C 146.00 A

96440712 Valve Kit, DME/S2-DME48 PP/E/C, Spring-loaded 153.00 A

91136476 Valve Kit, DME/S2-DME48 PP/E/T, Spring-loaded 217.00 B

96446836 Valve Kit, DME/S2-DME48 PP/V/C 163.00 A

96446837 Valve Kit, DME/S2-DME48 PP/V/C, Spring-loaded 173.00 A

91134297 Valve Kit, DME/S2-DME48 PP/V/T 259.00 A

96574015 Valve Kit, DME/S2-DME48 PV/T/C 377.00 B

96440713 Valve Kit, DME/S2-DME48 PV/V/C 193.00 A

96440722 Valve Kit, DME/S2-DME48 PV/V/C, Spring-loaded 196.00 A

91134296 Valve Kit, DME/S2-DME48 PV/V/T 272.00 A

96604089 Valve Kit, DME/S2-DME48 SS/E/SS 252.00 B

91136199 Valve Kit, DME/S2-DME48 SS/E/SS, Spring-loaded 248.00 B

96440723 Valve Kit, DME/S2-DME48 SS/V/SS 252.00 A

96440724 Valve Kit, DME/S2-DME48 SS/V/SS, Spring-loaded 261.00 A

96519442 Valve Kit, DME60/150, PP/E/C 362.00 C

96519443 Valve Kit, DME60/150, PP/V/C 368.00 C

96573952 Valve Kit, DME60/150, PV/T/C 716.00 C

96519444 Valve Kit, DME60/150, PVDF/V/C 537.00 C

96519445 Valve Kit, DME60/150, SS/V/SS, Spring-loaded 959.00 C

96519446 Valve Kit, DME60/150, PP/E/C, Spring-loaded 375.00 C

96519447 Valve Kit, DME60/150, PP/V/C, Spring-loaded 381.00 C

96519448 Valve Kit, DME60/150, PVDF/V/C, Spring-loaded 549.00 C

96519449 Valve Kit, DME60/150, SS/V/SS, Spring-loaded 997.00 C

96519452 Valve Kit, DME375/940, PP/E/G 452.00 C

96519453 Valve Kit, DME375/940 PP/V/G 473.00 C

96519454 Valve Kit, DME375/940 PVDF/V/G 642.00 C

96519455 Valve Kit, DME375/940 SS/V/SS 1,131.00 C

96519456 Valve Kit, DME375/940 PP/E/G, Spring-loaded 496.00 C

96519457 Valve Kit, DME375/940 PP/V/G, Spring-loaded 519.00 C

96519458 Valve Kit, DME375/940 PVDF/V/G, Spring-loaded 687.00 C

96519459 Valve Kit, DME375/940 SS/V/SS, Spring-loaded 1,178.00 C

Venting Valve Kit (Includes venting valve only)96484194 Venting Valve Kit, PP/E/C, DME/DMS PP Valve Body 54.50 A

96484193 Venting Valve Kit, PP/V/C, DME/DMS PP Valve Body 54.50 A

91136477 Venting Valve Kit, PP/E/T, DME/DMS PP Valve Body 76.80 B

96484195 Venting Valve Kit, PV/V/C, DME/DMS PVDF Valve Body 68.30 A

96520488 PP Valve Body/E, DME60 to 940 221.00 C

96520489 PP Valve Body/V, DME60 to 940 234.00 C

96520500 PVDF & SS Valve Body/V, DME60 to 940 317.00 C

Valve Spring Kit (Includes two springs)96484196 Valve Spring Kit, D 9.2 mm Ball, DME2 - DME48 DMS 59.40 A

96605902 Valve Spring Kit for D 15 Ball, DME60-DME150 82.60 B

96658435 Valve Spring Kit for D 28 Ball, DME375-DME940 95.70 C

Diaphragm Complete (Includes diaphragm, support disk and backplate)96476698 Diaphragm Kit, DME/S2, D28, includes Backplate 88.00 A

96476701 Diaphragm Kit, DMS4, D32, includes Backplate 109.00 A

96476702 Diaphragm Kit, DME/S8, D38, includes Backplate 123.00 A

96476703 Diaphragm Kit, DME/S12, D43.5, includes Backplate 153.00 A



96519470 Diaphragm Kit, DME60 222.00 C






ABC Delivery

NOTE: For contents of kits, see WebCAPS.

GRUNDFOS DOSING Metering PumpsService Kits

79


Pump Head Kit (Includes head, diaphragm, backplate, suction, discharge and venting valves, connection pieces)91127700 Pump Head Kit, DME/S2 PP/E/C US 331.00 A

91127701 Pump Head Kit, DME/S2 PP/E/C Spring-loaded US 369.00 A

91136478 Pump Head Kit, DME/S2 PP/E/T Spring-loaded US 513.00 B

91127702 Pump Head Kit, DME/S2 PP/V/C US 366.00 A

91127703 Pump Head Kit, DME/S2 PP/V/C Spring-loaded US 405.00 A

91127704 Pump Head Kit, DME/S2 PV/V/C US 438.00 A

91127705 Pump Head Kit, DME/S2 PV/V/C Spring-loaded US 471.00 A

91127706 Pump Head Kit, DME/S2 SS/V/SS US 770.00 A

91127707 Pump Head Kit, DME/S2 SS/V/SS Spring-loaded US 792.00 A

91127708 Pump Head Kit, DMS4 PP/E/C US 334.00 A

91127709 Pump Head Kit, DMS4 PP/E/C Spring-loaded US 373.00 A

91127710 Pump Head Kit, DMS4 PP/V/C US 368.00 A

91127711 Pump Head Kit, DMS4 PP/V/C Spring-loaded US 407.00 A

91127712 Pump Head Kit, DMS4 PV/V/C US 444.00 A

91127713 Pump Head Kit, DMS4 PV/V/C Spring-loaded US 477.00 A

91127714 Pump Head Kit, DMS4 SS/V/SS US 780.00 A

91127715 Pump Head Kit, DMS4 SS/V/SS Spring-loaded US 798.00 A

91127716 Pump Head Kit, DME/S8 PP/E/C US 340.00 A








91127724 Pump Head Kit, DME/S12 PP/E/C US 348.00 A








91127732 Pump Head Kit, DME19 PP/E/C US 535.00 A

91127733 Pump Head Kit, DME19 PP/E/C Spring-loaded US 561.00 A

91127734 Pump Head Kit, DME19 PP/V/C US 598.00 A

91127735 Pump Head Kit, DME19 PP/V/C Spring-loaded US 645.00 A

91127736 Pump Head Kit, DME19 PV/V/C US 703.00 A

91127737 Pump Head Kit, DME19 PV/V/C Spring-loaded US 727.00 A

91127738 Pump Head Kit, DME19 SS/V/SS US 913.00 A

91127739 Pump Head Kit, DME19 SS/V/SS Spring-loaded US 941.00 A

91127740 Pump Head Kit, DME48 PP/E/C US 561.00 A

91127741 Pump Head Kit, DME48 PP/E/C Spring-loaded US 587.00 A

91127742 Pump Head Kit, DME48 PP/V/C US 623.00 A

91127743 Pump Head Kit, DME48 PP/V/C Spring-loaded US 671.00 A

91127744 Pump Head Kit, DME48 PV/V/C US 729.00 A

91127745 Pump Head Kit, DME48 PV/V/C Spring-loaded US 765.00 A

91127746 Pump Head Kit, DME48 SS/V/SS US 905.00 A

91127747 Pump Head Kit, DME48 SS/V/SS Spring-loaded US 934.00 A

96549401 Pump Head Kit, DME60, PP/E/C, NPT 640.00 C

96549402 Pump Head Kit, DME60, PP/V/C, NPT 685.00 C

96549403 Pump Head Kit, DME60, PVDF/V/C, NPT 882.00 C

96549404 Pump Head Kit, DME60, SS/V/SS, NPT 1,938.00 C

96549405 Pump Head Kit, DME60, PP/E/C, Spring-loaded, NPT 655.00 C

96549406 Pump Head Kit, DME60, PP/V/C, Spring-loaded, NPT 700.00 C

96549407 Pump Head Kit, DME60, PVDF/V/C, Spring-loaded, NPT 903.00 C

96549408 Pump Head Kit, DME60, SS/V/SS, Spring-loaded, NPT 1,970.00 C



ABC Delivery



80


Pump Head Kit (continued)96549409 Pump Head Kit, DME150, PP/E/C, NPT 720.00 C

96549431 Pump Head Kit, DME150, PP/V/C, NPT 764.00 C

96549432 Pump Head Kit, DME150, PVDF/V/C, NPT 976.00 C

96549433 Pump Head Kit, DME150, SS/V/SS, NPT 2,111.00 C

96549434 Pump Head Kit, DME150, PP/E/C, Spring-loaded, NPT 734.00 C

96549435 Pump Head Kit, DME150, PP/V/C, Spring-loaded, NPT 779.00 C

96549436 Pump Head Kit, DME150, PVDF/V/C, Spring-loaded, NPT 999.00 C

96549437 Pump Head Kit, DME150, SS/V/SS, Spring-loaded, NPT 2,148.00 C

96561182 Pump Head Kit, DME375, PP/E/G, 1.25" NPT 1,236.00 C

96561183 Pump Head Kit, DME375, PP/V/G, 1.25" NPT 1,259.00 C

96561184 Pump Head Kit, DME375, PVDF/V/G, 1.25" NPT 2,262.00 C

96561185 Pump Head Kit, DME375, SS/V/SS, 1.25" NPT 2,799.00 C

96561186 Pump Head Kit, DME375, PP/E/G, Spring-loaded, 1.25" NPT 1,281.00 C

96561187 Pump Head Kit, DME375, PP/V/G, Spring-loaded, 1.25" NPT 1,305.00 C

96561188 Pump Head Kit, DME375, PVDF/V/G, Spring-loaded, 1.25" NPT 2,308.00 C

96561189 Pump Head Kit, DME375, SS/V/SS, Spring-loaded, 1.25" NPT 2,843.00 C

96561200 Pump Head Kit, DME940, PP/E/G, 1.25" NPT 1,325.00 C

96561201 Pump Head Kit, DME940, PP/V/G, 1.25" NPT 1,348.00 C

96561202 Pump Head Kit, DME940, PVDF/V/G, 1.25" NPT 2,580.00 C

96561203 Pump Head Kit, DME940, SS/V/SS, 1.25" NPT 3,239.00 C

96561204 Pump Head Kit, DME940, PP/E/G, Spring-loaded, 1.25" NPT 1,370.00 C

96561205 Pump Head Kit, DME940, PP/V/G, Spring-loaded, 1.25" NPT 1,392.00 C

96561206 Pump Head Kit, DME940, PVDF/V/G, Spring-loaded, 1.25" NPT 2,625.00 C

96561207 Pump Head Kit, DME940, SS/V/SS, Spring-loaded, 1.25" NPT 3,281.00 C

Front Cover96520502 Front Cover Kit, DME60/940 76.00 C

Power Cord Kit 96497535 Power Cord Kit, DME 2 to 48 132.00 C

96440334 Power Cord Kit, DME 60 to 940 38.60 C

Leak Detector Kit96528620 Leak Detector, Sensor M12 for diaphragm, DME60 to 940 582.00 C

96528599 Adapter f/ mount. leak detector sensor M12, DME60 to 940 220.00 C



ABC Delivery



81

DDI, DMI Service Kits

Pump Model/SizeValve Size

(DN)Materials

Alldos Part Number


List Price[$ USD]

ABC Delivery

PVC/V/G 553-1395 91835862 61.20 A

PVC/E/C 553-1399 91835864 85.90 B

PP/V/G 553-1396 91835863 61.20 C

PP/E/C 553-1400 91835865 85.90 B

PV/T/C 553-1401 91835866 188.00 C

SS/T/SS 553-1402 on request 297.00 C

PVC/V/G 553-1403 91835867 64.70 A

PVC/E/C 553-1407 91835869 89.50 B

PP/V/G 553-1404 91835868 64.70 A

PP/E/C 553-1408 91835870 89.50 B

PV/T/C 553-1409 96641403 197.00 A

SS/T/SS 553-1410 91836298 718.00 B

PVC/V/G 553-1411 91835872 61.20 B

PVC/E/C 553-1415 91835873 85.90 C

PP/V/G 553-1412 on request 57.20 C

PP/E/C 553-1416 91836371 85.90 B

PV/T/C 553-1417 91835874 188.00 C

SS/T/SS 553-1418 on request 297.00 C

PVC/V/G 553-1419 91835875 103.00 B

PVC/E/T 553-1423 91835877 124.00 B

PP/V/G 553-1420 91835876 103.00 B

PP/E/T 553-1424 on request 115.50 C

PV/T/T 553-1425 91835878 203.00 C

SS/T/SS 553-1426 91836293 322.00 B

PVC-P3/V/C 553-1487 91835901 176.00 A

PVC-P3/E/C 553-1492 91835905 183.00 C

PVC-P3/V/C 553-1486 96641420 183.00 A

PVC-P3/E/C 553-1495 91835906 196.00 B

PP-P3/V/C 553-1496 on request 170.50 C

PP-P3/E/C 553-1497 on request 170.50 C

PVC-P3/V/C 553-1488 91835902 236.00 C

PVC-P3/E/C 553-1498 91835907 236.00 C

PP-P3/V/C 553-1499 91835908 236.00 C

DMI 0.8-16, 1.6-10, 1.1-16, 3-10, 3.6-16, 4-8 4 PVC-AD/V/G 553-1427 96640195 218.00 B

DMI 5-6, 6-8 4 PVC-AD/V/G 553-1428 91835880 218.00 C

DMI 9-6, 14-4, 18-4 8 PVC-AD/V/G 553-1429 91835881 236.00 C


Includes pump head gaskets, diaphragm, check valves (inner parts for SS valves)

4

4

DDI 14-4, 20-3DMI 9-6, 14-4, 18-4

8

DDI 0.4-10, 2-16, 3-10, 6-10DMI 0.8-16, 1.6-10, 1.1-16, 3-10, 3.6-16, 4-8

4

DMI 0.3-10


Kits for heads with Plus3 system

Kits for heads with automatic deaeration

DDI 0.4-10DMI 0.3-10

4

DDI 2-16, 3-10, 6-10DMI 0.8-16, 1-10, 1.6-10, 1.1-16, 3-10, 3.6-16, 4-8

4

DMI 5-6, 6-8 4

DMI 6-8

GRUNDFOS DOSING Metering PumpsDDI and DMI Service Kits

82

DDI, DMI Service Kits

Pump Model/SizeValve Size

(DN)Materials

Alldos Part Number


List Price[$ USD]

ABC Delivery

PVC/V/G 553-1684-01 96641808 271.00 C

PVC/E/SS 553-1684-02 91836617 271.00 B

PP/V/G 553-1686-01 96688938 235.00 C

PP/E/T 553-1686-02 96688939 271.00 C

PV/T/T 553-1687-05 96641810 359.00 B

SS/T/SS 553-1685-05 96688933 450.00 C

PVC-L/V/G 553-1684-10 91836337 295.00 A

PVC-L/E/SS 553-1684-12 96688929 310.00 C

PP-L/V/G 553-1686-10 96688940 312.00 C

PP-L/E/T 553-1686-12 96688941 319.00 C

PV-L/T/T 553-1687-15 96688942 314.00 B

SS-L/T/SS 553-1685-15 96688936 495.00 C

PVC and PP/V/G 553-1688-01 96634524 297.00 B

PVC and PP/E/SS 553-1688-02 96641222 287.00 B

PV/T/T 553-1691-05 96641811 497.00 B

SS/T/SS 553-1689-05 96688950 512.00 C

PVC-L and PP-L/V/G 553-1688-10 96688945 309.00 B

PVC-L and PP-L/E/SS 553-1688-12 96688946 332.00 C

PV-L/T/T 553-1691-15 96688956 544.00 C

SS-L/T/SS 553-1689-15 96688953 560.00 C

DDI 209/DMI Transparent control panel conver Makrolon 553-1456 91835883 23.50 C



DDI 222 kits

DDI 60-10

DDI 150-4 with leak detection 20

DDI 60-10 with leak detection

8

8

DDI 150-4 20

GRUNDFOS DOSING Metering PumpsDDI and DMI Service Kits

83

DMX Service Kits

Pump Model/Size MaterialsAlldos Part

Number


List Price[$ USD]

ABC Delivery

PVC/V/G 553-520 91835947 132.00 B

PVC/T/T 553-520-3 91835948 214.00 C

PV/T/T 553-535 91835961 197.00 C

SS/V/SS 553-525 96375312 303.00 C

PVC/V/G 553-521 91835949 132.00 B

PVC/T/C 553-521-3 91835950 363.00 C

PVC/T/T 553-521-5 91835951 214.00 C

PV/T/T 553-536 91835962 197.00 C

SS/V/SS 553-526 96375310 303.00 C

PVC/V/G 553-522 96634413 303.00 A

PVC/E/SS 553-522-2 91835953 132.00 C

PVC/T/T 553-522-3 91835954 214.00 A

PV/T/T 553-537 91835963 197.00 C

SS/V/SS 553-527 91835959 303.00 C

PVC/V/G 553-523 91835955 132.00 B

PVC/E/SS 553-523-2 91835956 150.00 C

PVC/T/T 553-523-3 91835957 214.00 B

PVC/T/C 553-523-5 91835958 363.00 C

PP/V/G 553-533 91835960 132.00 B

PV/T/T 553-538 91835964 232.00 A

SS/V/SS 553-528 96375314 327.00 C

PVC/V/G 553-544 91835965 150.00 A

PVC/E/SS 553-544-2 91835966 172.00 C

PV/T/T 553-546 91835967 232.00 C

PVC/V/G 553-547 91835968 171.00 C

PV/V/T 553-549 91835969 266.00 C

SS/V/SS 553-551 96375308 339.00 C


Includes head gaskets, diaphragm, and check valves or valve parts [SS valves (DN20)]

DMX 4-10DMX 7.2-16DMX 8-10DMX 13.7-6DMX 16-10

DMX 7-10DMX 14-10DMX 27-10

6

DMX 9-10DMX 18-10DMX 35-10

DMX 12-10DMX 26-10DMX 50-10


DMX 221

1

2

3

4

5DMX 17-4DMX 39-4DMX 75-3.5

DMX 25-3DMX 60-3 DMX 45-3

Head size

GRUNDFOS DOSING Metering PumpsDMX Service Kits

84

DMX Service Kits


Number


List Price[$ USD]

ABC Delivery

PP/V/G 553-1471 91835890 109.00 B

PV/T/T 553-1473 91835891 141.00 C

PVC/E/SS 553-1470-2 91835889 109.00 C

PVC/V/G 553-1470 91835888 109.00 C

SS/V/SS 553-1472 91836368 218.00 B


PV/T/T 553-1477 91835894 159.00 C

PVC/E/SS 553-1474-2 91835893 128.00 C

PVC/V/G 553-1474 91835892 128.00 B

SS/V/SS on request 236.00 C


PV/T/T 553-1481 91835897 172.00 C

PVC/E/SS 553-1478-2 on request 125.40 C

PVC/V/G 553-1478 91835895 135.00 B

SS/V/SS 553-1480 91835896 250.00 C


PV/T/T 553-1485 on request 338.80 C

PVC/E/SS 553-1482-2 on request 178.20 C

PVC/V/G 553-1482 91835898 191.00 C

SS/V/SS 553-1484 91835899 363.00 C

PP/V 553-1330 on request 611.60 C

PVC/E 553-1329.1 91835857 655.00 C

PVC/V 553-1329 91835856 655.00 C

SS/V 553-1331 on request 639.10 C

PVC/V 553-1332 91835858 711.00 A

PVC/E 553-1332.1 91835859 711.00 C

PP/E 553-1333 on request 664.40 C

SS/V 553-1334 on request 664.40 C

DMX 221 heads 1-4 553-1489 91835903 37.70 B

DMX 221 heads 5-6; DMX 226 553-1490 91835904 68.30 B



Head size

1

3

DMX 227

DMX 226

Includes head gaskets, diaphragm, and check valves or valve parts [SS valves (DN20)]

1

2

DMX 52-8DMX 67-10DMX 100-8DMX 132-10

DMX 82-5DMX 95-8DMX 160-5DMX 199-8

DMX 130-3DMX 152-6DMX 255-3DMX 321-6

DMX 249-3DMX 525-3

2

4

Parts for integral pressure relief valve: includes diaphragm, ball, and o-ring

GRUNDFOS DOSING Metering PumpsDMX Service Kits

85

DMH Service Kits


Number


List Price[$ USD]

ABC Delivery


PV/T/T 553-257 91835925 175.00 A

PVC/E/SS 553-1318 on request 96.90 C

PVC/V/G 553-253 91835922 93.00 B

PVC-L/V/G 553-253-1 91835923 256.00 C

PV-L/T/T 553-257-1 91836418 261.00 B

SS/V/SS 553-254 96375326 231.00 C

Y/V/Y 553-255 91835924 522.00 B

363 PSI SS/V/SS 553-251 91835921 231.00 B

PVC or PP/V/G 553-293 91836421 146.00 A

PV/T/T 553-294 91835932 177.00 A

PVC/E/SS 553-1319 91835851 116.00 C

PVC/T/C 553-292-6 91836270 261.00 C

SS/V/SS 553-295 96375328 274.00 C

PVC/E/SS 553-1320 91835852 139.00 C

PV/T/T 553-299 91835935 397.00 C

PVC or PP/V/G 553-297 91835933 139.00 A

SS/V/SS 553-280 96375330 259.00 C


PV/T/T 553-394 91835941 442.00 C


PVC/V/G 553-392 91835940 177.00 C

SS/V/SS 553-395 96375332 251.00 C

PV/T/T 553-389 91835939 442.00 C

PVC or PP/V/G 553-388 91836545 222.00 B


SS/V/SS 553-390 96375334 342.00 C


PV/T/T 553-279 91835927 822.00 B

PVC/E/SS 553-1323 91835853 464.00 C

PVC/V/G 553-276 91835926 464.00 B

SS/V/SS 553-277 96375336 648.00 C

DMH 280 SS/V/SS 553-1054 91835831 171.00 C

DMH 281 SS/V/SS 553-281 96639563 171.00 B

DMH 283 SS/V/SS 553-283 91835929 231.00 A

DMH 285 SS/V/SS 553-285 on request 179.30 C

DMH 286 SS/V/SS 553-286 91835930 201.00 C

DMH 287 SS/V/SS 553-290 on request 190.30 C

SS/V/SS 553-1314 91835849 308.00 C

SS-L/V/SS 553-1316 91835850 339.00 C



DMH 257

DMH 288

Includes head gaskets, diaphragm, and check valves or valve parts (DN20 or SS valves)

DMH 255, Sizes 194-10, 270-10, 332-10

DMH 255, Size 403-10

232 PSIDMH 251, 252

DMH 253

DMH 254

GRUNDFOS DOSING Metering PumpsDMH Service Kits

86

DMH Service Kits


Number


List Price[$ USD]

ABC Delivery

DMH 251, 252 553-405 91835942 494.00 C

DMH 253, 283, 285 553-406 91835943 508.00 B

DMH 254, 286 553-407 91835944 540.00 C

DMH 255 553-1091 91835844 649.00 B

DMH 257 553-409 91835945 748.00 C

Filling device - double diaphragm paraffin fluid kit 553-410 91835946 141.00 C

Hydraulic Oil GallonsAlldos Part

Number


List Price[$ USD]

ABC Delivery

DMH 251, 252 0.5 Simplex/Duplex 555-300 on request 38.50 C

DMH 253, 280, 281 0.5 Simplex/Duplex 555-301 91835936 42.40 C

1 Simplex 555-302 91835937 94.20 C

1.5 Duplex 555-303 on request 108.90 C

1.5 Simplex 555-305 on request 132.00 C

2.25 Duplex 555-306 on request 179.30 C


DMH 257, 285, 286, 287

Diaphragm leak detection service kits

DMH 254, 255, 283, 288


GRUNDFOS DOSING Metering PumpsDMH Service Kits

87

Pump Model/Size Head Size MaterialsAlldos Part

Number


List Price[$ USD]

ABC Delivery

PP/V/G 553-037 91835803 82.40 C

PVC/V/G 553-072 91835812 82.40 C

SS/V/SS 553-074 91835813 157.00 C

PP/V/G 553-038 96638529 82.40 C

PVC/E/C 553-095 91835819 68.30 C

PVC/V/G 553-075 91835814 82.40 C

PV/V/C 553-076 91835815 117.00 C

SS/V/SS 553-077 91835816 155.00 C

PP/V/G 553-039 91835805 82.40 C

PP/E/C 553-052 91835806 78.90 C

PVC/V/G 553-078 91835817 82.40 C

PV/V/C 553-079 91835818 136.00 C

PP/V/G 553-188 91835915 106.00 C

PV/V/T 553-190 91835917 136.00 C

PVC/E/C 553-193 91835918 78.90 C

PVC/V/G 553-189 91835916 106.00 C

PVC-AD/V 553-208 91835920 322.00 C

1 PVC-P3/V/C 553-1459 91835886 176.00 C

2 PVC-P3/V/C 553-1449 91835882 172.00 C

3 PVC-P3/V/C 553-1460 91835887 236.00 C

1 PVC/V/G 553-577 91835970 291.00 C

2 PVC/V/G 553-582 91835971 319.00 C

PV/T/T 553-1059 91835833 97.70 C

PVC/V/G 553-1056 91835832 88.30 A

SS/V/SS 553-1058 96375324 144.00 C

PV/T/T 553-1063 91835836 159.00 C

PVC/V/G 553-1060 96689623 103.00 C

SS/V/SS 553-1062 96375318 157.00 C

PVT/T 553-1067 91835839 144.00 C

PVC/E/SS 553-1064-2 91835838 135.00 C

PVC/V/G 553-1064 91835837 135.00 C

SS/V/SS 553-1066 96375320 190.00 C

PV/T/T 553-1071 91835841 298.00 C

PVC/V/G 553-1068 91835840 228.00 C

SS/V/SS 553-1070 96375321 345.00 C


3

208 with machined Plus3 head

226

225

4


205-9 to 14

1

2

205-0.2

205-0.8 to 3.0

205-5.0 to 6.0

Service Kits for obsolete Alldos pumps

GRUNDFOS DOSING Metering PumpsService Kits for Obsolete Alldos Pumps

88

Description Material Number List price [$ USD]

ABC Delivery

Compact System Spare parts

Cleaning blade for AQC-D2/D3 96622950 42.70 C

Cleaning blade for AQC-D1 96609181 66.30 C

PAA diaphragm cap w. electrolyte 96622962 353.00 C

PAA electrolyte for meas. cell 96622966 140.00 C

H2O2 diaphragm cap w. electrolyte 96622974 439.00 C

H2O2 electrolyte for meas. cell 96622975 140.00 C

Solution 0,5ppm/100ml flouride 96622978 78.70 C

Solution 2,0ppm/100ml flouride 96622979 39.40 C

Filling solution for flouride electrolde 96622990 65.20 C

Motor for AQC-D1, 1x120V, 50/60Hz 96622999 619.00 C

Gasket partsset for AQC D1-D3 cells 96609171 11.80 A

Lockscrew partsset for AQC D1-D3 cells 96624812 12.80 B

Measuring cells and accessories

PAA/H2O2 armature for meas. cell 91835359 903.00 C

PAA measuring cell complete 95701375 2,892.00 C

H2O2 measuring cell complete 95701376 3,102.00 C

Ext. water filer for AQC D1-D3 cells 96622995 322.00 C

Flow PVC armature, pH/Redox elect. 96609169 177.00 B

Flow SS armature, pH/Redox elect. 96609170 1,197.00 C

Pressure retention valve for AQC D1-D3 96609179 194.00 C

Filter strainer AQC D1-D3 96609180 49.00 C

Flow PVC armature, conduc. elect 96627404 269.00 C

Flow SS armature, conduc. elect 96627405 2,077.00 C

Flow PVC armature, induc. elect 96627408 TBD C

Flow PP armature, induc. elect 96627409 TBD C

Immersion PVC armature, induc. elect 96627430 TBD C

Immersion PP armature, induc. elect 96627431 582.00 C

Im. PP armature, 1000mm, pH/redox, 3 max 96627432 1,645.00 C

Im. PP armature, 2000mm, pH/redox, 3 max 96627433 1,779.00 C



Instrumentation Accessories and Spare Parts


89

Description Material Number List price [$ USD]

ABC Delivery

Electrodes: probes, parts, solutions, etc.

Conductivity probe, 0,05-200 µS/cm 96609150 960.00 C

Conductivity probe, 1-2000 µS/cm 96609151 960.00 C

Conductivity probe, 50-20000 µS/cm 96609152 960.00 C

Conductivity probe, 50-20000 µS/cm 96609157 2,262.00 C

Pt100 PG13,5 screw thread 96623001 319.00 B

Redox electrode, DIP only 96622944 149.00 C

Redox electrode w. ceramic diaph 96609162 211.00 B

Redox electrode w. PTFE diaph 96609163 570.00 C

Redox buffer solution 96609166 12.40 C

pH electrode w. ceramic diaph 96609158 182.00 A

pH electrode w PTFE diaph 96609159 221.00 B

pH electrode for KCL connection 96609160 435.00 C

pH electrode w. hole diaph 96609161 212.00 C

pH buffer solution 96609165 36.00 C

PAA electrode w.diaph cap/electro. 96622959 2,066.00 C

H2O2 electrode w.diaph cap/electro. 96622973 2,204.00 C

Fluoride electrode incl. 1m cable 96622977 5,692.00 C

Chlorine electrode, refference 96609174 168.00 A

Chlorine electrode, gold 96609175 432.00 A

Chlorine electrode, platinum 96609176 407.00 C

Water sensor w. 1 m cable 96609172 358.00 C

Water sensor w. 3 m cable 96609173 290.00 B

Cables

Cable 1m pH/redox electrode 96609182 55.10 B

Cable 3m pH/redox electrode 96609183 55.10 C

Cable 1m AQC AU/PT electrodes 96609184 57.40 B

Cable 3m AQC AU/PT electrodes 96609185 64.20 C

Cable 5m for conduc.conduc. probe 96611925 19.30 C



Cable 5m for induc.conduc. probe 96611940 196.00 C



Cable 2m PAA/H2O2 electrode 96622969 343.00 C

DIT Accessories

5 x vial/sealing plug for DIT 96623003 10.20 C

Chlorine test vials for DIT 96623005 79.20 C

Redox electrode for DIT 96623006 293.00 C

pH electrode for DIT 96609164 339.00 C

Chlorine reagent for DIT 96609167 71.90 C

pH reagent for DIT 96609168 16.90 C



Instrumentation Accessories and Spare Parts


90

Date post:	06-Feb-2018
Category:	Documents
Upload:	phungmien
View:	359 times
Download:	33 times

GRUNDFOS DOSING Metering Pumps - cff3. · PDF fileDME and DMS DME 2 to 48 DME 60 to 940 DMS...

Documents