GS SERIES PUMPS
02
EN733*1 : End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
EN 12756*2 : Mechanical seals. Principal dimensions, designation and material codesErP*3 : Eco-design requirements of Energy-related Products
Standardized pumpsThe European Standard EN733*1 complied
DIN 16bar flanges (EN PN16)25bar flanges (EN PN25) option available
New hydraulic designErP*3 directive compliedMEI≧0.4
Mechanical sealComplied with EN 12756*2
Various material option available
Model GS
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
P r o d u c tF e a t u r e s
03
E n e r g y - s a v i n g D e s i g n1• World top class pump efficiency achieved.• Major improvement over our previous models by impeller designed using our proprietary 3D inverse design technology.• Higher efficiency means lower energy consumption and motor output, and more compact size.
S i m p l e M a i n t e n a n c e2• Back pull-out structure enables disassembly and inspection without removal of suction and discharge piping.• Shield bearings eliminate need for adding or exchanging lubricating oil.• Shaft seal flushing and quenching piping not required for the standard application.• Air-bleeding not required.• Simplified bearings and shaft seal enable easy assembly.
P u m p S p e c i f i c a t i o n s3• Maximum operating pressure: 25 bar• Liquid temperature range expansion:-25°C to 140°C• Compatible with multiple flange standards.• Able to meet customer specifications with many combinations of shaft seals and materials.
I n t e r n a t i o n a l S t a n d a r d s4• Pump dimensions adopt EN733• Mechanical seal adopts EN12756 • Protector fitted in accordance with EN294.
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
PUMP GENERAL SPECIFICATION
04
-10℃ to 140°CUp to 16bar(1.6MPa) / for standard flange DIN-PN16Up to 14bar(1.4MPa) / for standard flange JIS10KEN1092-2 , JIS B 2239ClosedMechanical Seal , Gland PackingN/A , Self , Self + Reverse , ExternalShield ball bearing (grease lubrication)Cast ironCast iron or Ductile cast iron (*1) Bronze , 304 Stainless steelCr.steel , Duplex stainless steel (*2)Bronze , Cast ironN/A , 304 Stainless steel (in case of Gland packing or some mechanical seal)NBR , FKM , EPDM
Liquid temperature
Max. Operating Pressure
Flange Standard
Description
ImpellerShaft sealFlushing
Ball bearingCasing
Impeller
ShaftCase wear ring
Shaft sleeveO-ring
Construction
Material (*3)
Model GSCasing Material: Cast Iron
Bold characters are applied for standard specification(*1) Impellers made of ductile cast iron are applied only the pumps model GS100-400, 125-400, 125-500,
150-400, 150-500, 200-400 and 200-500.(*2) Wetted part only(*3) Please see P24 and P25 for specific materials
-10℃ to 140°CUp to 25bar(2.5MPa) / for standard flange DIN-PN25Up to 25bar(2.5MPa) / for standard flange JIS20KEN1092-2 , JIS B 2239ClosedMechanical SealN/A , Self , ExternalShield ball bearing (grease lubrication)Ductile cast ironCast iron or Ductile cast iron (*1) Bronze , 304 Stainless steelCr.steel , Duplex stainless steel (*2)Bronze , Cast ironN/A , 304 Stainless steel (in case of some mechanical seal)NBR , FKM , EPDM
Liquid temperature
Max. Operating Pressure
Flange Standard
Description
ImpellerShaft sealFlushing
Ball bearingCasing
Impeller
ShaftCase wear ring
Shaft sleeveO-ring
Construction
Material (*3)
Model GSCasing Material: Ductile Cast Iron (Larger than pump model 100X80)
Bold characters are applied for standard specification(*1) Impellers made of ductile cast iron are applied only the pumps model GS100-400, 125-400, 125-500,
150-400, 150-500, 200-400 and 200-500.(*2) Wetted part only(*3) Please see P24 and P25 for specific materials
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
Model GSSCasing Material: Stainless Steel
-25℃ to 140°CUp to 16bar(1.6MPa) / for standard flange DIN-PN16Up to 14bar(1.4MPa) / for standard flange JIS10KEN1092-1 , JIS B 2220ClosedMechanical Seal , Gland PackingN/A , Self , Self + Reverse , ExternalShield ball bearing (grease lubrication)304 Stainless steel , 316 Stainless steel , Duplex stainless steel304 Stainless steel , 316 Stainless steel , Duplex stainless steelDuplex stainless steel (*1)316 Stainless steel , Duplex stainless steelN/A , 304/316 Stainless steel , Duplex stainless steel(in case of Gland packing or some mechanical seal)FKM , EPDM
Liquid temperature
Max. Operating Pressure
Flange Standard
Description
ImpellerShaft sealFlushing
Ball bearingCasingImpeller
ShaftCase wear ring
Shaft sleeve
O-ring
Construction
Material (*2)
Bold characters are applied for standard specification(*1) Wetted part only(*2) Please see P24 and P25 for specific materials
PUMP GENERAL SPECIFICATION
05END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
Applications
BUILDING・Air conditioning-District heating & cooling
General water supplyBrine (antifreeze liquid)Hot water circulationHigh pressure booster
WATER SUPPLY・Water supply duties for municipalities
・Irrigation
・Drainage clean water
・Fire fighting protection
・Swimming pool
GENERAL INDUSTRY・Semiconductor Industry
Pure water
・Food IndustryGeneral water (Cooling water, Recycling water, Filtered water)CIP (Cleaning In Place)
・Pulp and Paper IndustryWhite water (below pulp conc.of 0.3%)
・Automotive IndustryWater (without slurry)Detergent (without slurry)
・Steel Industry, Non-ferrous metals IndustryCoolantCooling water
・Garbage incinerationCooling waterDeaeratorCondensate water
・OthersSeawaterBrackish waterOilsOther chemical
06END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
MODEL CODE
(*1) The letter “L” following the impeller classification code indicates different bearing designs. To give an example, GS80-315 and GS80-315L have different bearing designs and shaft size.
(*2) The letter “.1” following the impeller classification code indicates different casing and impeller designs. To give an example, GS32-125 and GS32-125.1 have different casing and impeller designs from one another.
The following designation is system according to EN733.
GS 32 - 125
07
NOMINAL IMPELLER DIAMETER IN MILLIMETERS (*1) (*2)
DISCHARGE NOZZLE, NOMINAL SIZE IN MILLIMETER
MODEL, -GS (CAST IRON OR DUCTILE CAST IRON CASING)-GSS (STAINLESS STEEL CASING)
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
PERFORMANCE CHART
Model GS 2P/50Hz
Model GS 4P/50Hz
08END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
Capaci ty (m3/h)
Tota
l Hea
d (m
)
50 100 200 300 400 500 1000 2000
6
810
15
20
30
4050
100
150
54
3
10 20 30 4042
5
0.55
0.750.55
0.55
0.75
1.1
1.51.1
0.55
1.10.75
2.21.5
1.1
2.2 3
43
2.2
5.5
0.75
0.55
1.5
1.1
32.2
5.5
4
3
11
5.57.5
1.1
0.75
1.5
2.2
4
3
5.54
117.5
3
2.2
1.5
5.5
43
117.5
1115
18.5
45373022
4
32.2
7.5
5.5
15
11
2218.515
4537
30
11
7.5
2218.5
15
3730
22
4537
55
5545
132
11
7.55.5
3730
2218.5
55
45
37
75
110
7590
160132
110
90
315
250
220160
200
0.55
0.55
0.75
0.75
1.5
2.2 4
7.5
1.5
1.1
2.2
1.5
15
7.5
4
7.5
22
1115
75
18.511
3730
90
75
90
200
375
15
0.75
1.1
0.55
1.1
1.5
3
3
2.2
4
5.5
5.5
15 18.5
30
45
75
30
75
160
15
11
55
32-125.1
32-160.1
32-200.1
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
40-315
50-125
50-160
50-200
50-250
50-315
65-125
65-160
65-200
65-250
65-315
80-160
80-200
80-250
80-315
80-400
125-200
125-250
125-315
125-400
125-500
100-200
100-250
100-315
100-400
100-160
150-250
150-315
150-400
150-500
200-400
200-500
150-200
Capaci ty (m3/h)
Tota
l Hea
d (m
)
200 400 1000 2000
40
50
100
150
20
15
20 4088
30
10010 30 50 300 500
10
200
200
2.21.5
1.1
0.75
2.2
34
4
1.5
2.2
3
4
5.5
5.5
5.5 7.5
7.511
15
2.2
3
4
5.5
7.5
11
15
15
18.5 22
22
3037 45
4
5.5
11
15 18.522
30
37
45
55
7.5
1115
18.5
22
30
30 37
45
55
7590
15
18.5
22
30
37
45
55 75
90
110
132 160
18.522
30
37
4555
110
9075
132
110
55
75
90
110 132
160
4555
75
90
132 160
200220
3
5.5
7.5
11
5.5
11
18.5
30
55 75
22
15
30
4555
7.5
3
11
18.5
110
30
11
55
90
75
37
110
200
160
1.5
3
4
3
7.5
18.5
5.5
7.5
11
37
22
37
45
37
45
110
90
90
200
160
220
7.5
4
32-125.1
32-160.1
32-200.1
32-125
32-200
32-250
40-125
40-160
40-200
40-250
40-315
50-125
50-160
50-200
50-250
50-315
65-125
65-160
65-200
65-250
65-315
80-160
80-200
80-250
80-315L
125-200
125-250L
125-315
100-200
100-250
100-315L
100-160
150-200
150-250
32-160
Note1 : The values inside the broken lines are motor output(kW) in case of density 1.0kg/L and viscosity 1.0mPa・s.Note2 : The indicated motor output(kW) value includes the following safety margins ;
Note3 : When selecting a pump , NPSH Av. should have a safety margin of at least 0.5m from NPSH Re.
up to 7.5kW : 15%11kW and above : 10%
Motor output in kW
Pump model
PERFORMANCE CHART
09
Model GSS 2P/50Hz
Model GSS 4P/50Hz
200 300 400 600 1000 20002010 4030 60 8086 100
40
6050
80
100
150
20
15
8
30
4
10
4
3
65
2
Capaci ty (m3/h)
Tota
l Hea
d (m
)
100-160
100 -200
100 -250
100 -315
100-400
125 -200
125 -250
125-400
125-500
150-200
150-250
150-315
150 -400
150-500
125 -31550-315
65-125
65-160
65-200
65-250
65-315
80-160
80-200
80-250
80-400
32-160.1
32-125.1
32-200.1
32-160
32-125
32-200
32-250
40-125
40-160
40-200
40-250
50-125
50-160
50-200
50-250
80-315
15
3
0.55
0.550.75
0.550.75
0.55
1.1
1.1
0.75 1.11.5
0.751.1 1.5
2.2
0.55
0.550.75
1.1
1.5
1.11.5
2.2
2.2 3 4
0.55
0.75
1.1
1.1
1.52.2
1.52.2
34
2.2 3
4
5.5
4
5.57.5 11
1.10.75
1.5
1.52.2
3
2.23
45.5
45.5
7.5
7.511
15
1.52.2
3
4
4
5.5
7.5
5.5 7.511
15
11 15
18.522
2230
37 45
0.55
3
1115
18.5
0.75
0.75
3
4
2.2
7.5
5.5
11
1115
18.5
18.5
22
30
37
45
22
7.5
15
15
11
18.511
2230
5.5
37
22 30
45
75
90
75
55
90
3037
5545
22
37
15
5.5
11
45
30
55
1518.5
37
45
7.5
75
75
55
90
75
132
110
160
37
30
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
200 400
Capaci ty (m3/h)600 1000 2000
Tota
l Hea
d (m
)
40
60
80
100
150
20
15
20 40 60 808
30
1008
100 -200
100-315L
125 -200
125 -250L
125 -315
150 -200
150 -25032-200.1
32-200
32-250
40-200
40-25050-250
50-315
65-250
65-315 80-315L
100 -160
100 -250
50-16065-160
65-200
80-160
80-200
80-250
50-20032-160.1
32-125.1
32-160
32-125
40-125
40-160
50-12565-125
15
90
0.75
1.1
1.5
2.2
3
2.23
45.5
1.5
2.2
3
4
3 45.5
7.5
3 4 5.57.5
5.57.5 11
7.511
1518.5
1.52.2
3
4
5.5
5.57.5
11
7.511
15
18.5
15 18.5 22 30
3
4
5.5
7.511
7.511
15
18.522
30
3022
3745
3037
4555 75
90
5.5 7.5
11
1115
18.5
30
18.522
37
3037
4555
55 7590 110
1115
18.5
2230
30
3745
55
4555
7590
110 132 160200
22
45
55
75
37
132 160
200
30
110
22
18.5
132220
110
200
160
75
45
55
110
90
160220200
37
7590
110
11090
75
5545
90
110
160200
132
Note1 : The values inside the broken lines are motor output(kW) in case of density 1.0kg/L and viscosity 1.0mPa・s.Note2 : The indicated motor output(kW) value includes the following safety margins ;
Note3 : When selecting a pump , NPSH Av. should have a safety margin of at least 0.5m from NPSH Re.
up to 7.5kW : 15%11kW and above : 10%
Pump model
Motor output in kW
PERFORMANCE CHART
Model GS 2P/60Hz
Model GS 4P/60Hz
10END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
Capaci ty (m3/h)
Tota
l Hea
d (m
)
60 80 100 200 300 400
6
8
10
15
20
30
40
5060
80
100
5
4
310 20 30 406 8
0.55
0.55
0.75
0.751.1
0.55
0.75
1.10.75
1.5 2.2
2.23 4
0.55
0.75
2.21.5
1.1
32.2
5.543
1.5
1.1
0.75
3
2.2
5.5
43
5.5
7.5
18.515
11
2.21.5
4
3
7.5
5.54
117.5
18.5
15
22
5.5
4
3
117.5
5.5
18.51511
3730
22
7555
45
5.5
4
15
11
22
18.5
37
30
75
5545
18.5
15
11
37
3022
5545
110
75
90
132
1109075
18.5
15
11
55
45
3730
90
75
132110
220200
160
45.5
7.5
11
132
160
132
75
45
22
22
18.5
30
15
22
3745
90
15
7.5
7.5
32.2
5.53
30
18.511
15
1115
7.5
4
1.1
1.51.1
1.5
37
302218.5
5545
0.75
22
7.5
55
32-125.1
32-160.1
32-200.1
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
40-315
50-125
50-160
50-200
50-250
50-315
65-125
65-160
65-200
65-250
65-315
80-160
80-200
80-250
80-315
80-400
125-200
125-250
125-315
125-400
125-500
100-200
100-250
100-315
100-400
100-160
150-250
150-315
150-400L
150-500
150-200
600 1000 2000
150
200
110
250
315250220
200
160
315
375
250
as request
375
132
160
132
75
200-400
200-500
Capaci ty (m3/h)
Tota
l Hea
d (m
)
200 400 600 1000 2000
40
60
80
100
150
20
15
20 40 60 8088
30
100
200
1.1
1.5
2.2
34
3
4
5.5 7.5
5.5 7.5
11
3
4
5.5
7.5
5.5
1115
1115
18.5
22
3
4
5.5
7.5
15
11
22
18.5
15
22
30
37
11
7.5
5.5
2218.5
15
37
3022
4537
15
11
30
2218.5
45
3730
7555
45
3730
22
7555
45
45
37
110
9075
200160
132
132110
9075
110
90
200160
110
9075
11090
220
220
132
132
132
132
5555
90
3018.5
18.5
37
5545
45
55
90
30
15
18.5
11
7.5
7.5
11
5.5
11
18.5
3045
30
45
250
32-125.1
32-160.1
32-200.1
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
50-125
50-160
50-200
50-250
65-125
65-160
65-200
65-250
80-160
80-200
80-250
125-200
125-250L
100-200
100-160150-200
100-250L
Note1 : The values inside the broken lines are motor output(kW) in case of density 1.0kg/L and viscosity 1.0mPa・s.Note2 : The indicated motor output(kW) value includes the following safety margins ;
Note3 : When selecting a pump , NPSH Av. should have a safety margin of at least 0.5m from NPSH Re.
up to 7.5kW : 15%11kW and above : 10%
Pump model
Motor output in kW
PERFORMANCE CHART
11
Model GSS 2P/60Hz
Model GSS 4P/60Hz
200 400300 600 1000 2000
40
6050
80
100
150
20
15
20 2020 40 60 8086
8
30
1005
10
4
56
3
Capaci ty (m3/h)
Tota
l Hea
d (m
)
125-315
125-500
150-315
150-500
40-250
50-315
65-250
65-31580-315
80-400
50-250
100-160
100 -200
100- 250
100-315
100-400
125 -200
125 -250
125-400
150-200
150-250
150-400L
32-160.1
32-125.1
32-200.1
32-160
32-125
32-200
32-250
40-125
40-160
40-200
50-125
50-160
65-125
65-160
65-200
80-160
50-20080-200
80-250
11
0.75
0.55
0.55 0.75 1.1
0.55
0.75
0.75 1.1
1.5
0.75 1.11.5
2.21.53
2.2 3 4
0.55
0.75
1.1
1.5
1.1 1.5
2.2
2.2
3
4
3 4 5.5
7.5
0.75
1.1
1.5
2.2
2.2
3
34
5.5
4 5.5 7.5
7.5 11 15 18.5
1.5
2.2
3
3
4
5.5
4
5.5
7.5
7.511
15
15 18.522 30
3
4
5.5
7.5
5.57.5
1115
1115
18.5 22
18.5 22
30
3745
3745
5575 90
18.5 22 30
1.5
22
15
22
11
15
18.5
7.5
5.5
4
7.5
11
15
22
30
18.5
4537
30
75
55
4537
110 132160
75
3037
45
55
11
15
160
132
110
18.522
22
4537
30
132
110
3745
5575
5575
90132
90
110
75
90
5575 90 220
250200
160
132
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
200 400 600 1000 2000
40
60
80
100
150
20
15
2010 40 60 80
30
100
Capaci ty (m3/h)
Tota
l Hea
d (m
)
32-160.1
32-125.1
32-200.1
32-160
32-125
32-200
32-250
40-12550-125
50-160
65-125
65-160100 -160
100-250L
125- 200
125-250L
150-200
40-160
40-200
40-250
50-200
50-250
65-200
65-250
80-160
80-200
80-250
100-200
18.5
22 30
1.52.2
3
45.5
7.5
11
15
2.23
4
5.5
3 4
5.5
7.5
5.5 7.5
11
5.5 7.511
11
1115 18.5
3
4
5.5
7.5
11
7.511
1518.5
1518.5
2230
2230
3745 55
5.5
7.5
11
15
15
18.5
2230
22 3037
45
37 45
55
11
15
18.5
22
18.5 22
3037
3037
45
55
45
55
75
90110
18.5
22
30
37
45
45 5575
90
75 90 110 132
45
55
45
37
30
7590
110 132
132110
90
7555
220
200160
132110
75
90
110
132
220200
160132
Note1 : The values inside the broken lines are motor output(kW) in case of density 1.0kg/L and viscosity 1.0mPa・s.Note2 : The indicated motor output(kW) value includes the following safety margins ;
Note3 : When selecting a pump , NPSH Av. should have a safety margin of at least 0.5m from NPSH Re.
up to 7.5kW : 15%11kW and above : 10%
Pump model
Motor output in kW
DIMENSIONS
MODELA D1 D2
Suction flangeT N d dn2 A D1 D2
Discharge flangeT N ddn1
165
185
185
200
220
250
285
340
405
125
145
145
160
180
210
240
295
355
99
118
118
132
156
184
211
266
319
20
20
20
22
24
26
26
30
32
4
4
4
8
8
8
8
12
12
19
19
19
19
19
19
23
23
28
32
40
50
65
80
100
125
150
200
140
150
165
185
200
220
250
285
340
100
110
125
145
160
180
210
240
295
76
84
99
118
132
156
184
211
266
18
18
20
20
22
24
26
26
30
4
4
4
4
8
8
8
8
12
19
19
19
19
19
19
19
23
23
50
65
65
80
100
125
150
200
250
GS32GS40GS50GS65GS80GS100GS125GS150GS200
Material: Cast Iron Flange Standard: EN PN16
Flange Dimension
Unit: mm
MODELA D1 D2
Suction flangeT N d dn2 A D1 D2
Discharge flangeT N ddn1
155
175
175
185
210
250
280
330
400
120
140
140
150
175
210
240
290
355
96
116
116
126
151
182
212
262
324
20
22
22
22
24
24
26
26
30
4
4
4
8
8
8
8
12
12
19
19
19
19
19
23
23
23
25
32
40
50
65
80
100
125
150
200
135
140
155
175
185
210
250
280
330
100
105
120
140
150
175
210
240
290
76
81
96
116
126
151
182
212
262
20
20
20
22
22
24
24
26
26
4
4
4
4
8
8
8
8
12
19
19
19
19
19
19
23
23
23
50
65
65
80
100
125
150
200
250
GS32GS40GS50GS65GS80GS100GS125GS150GS200
Flange Standard: JIS 10K Unit: mm
MODELA D1 D2
Suction flangeT N d dn2 A D1 D2
Discharge flangeT N ddn1
235
270
300
360
425
190
220
250
310
370
156
184
211
274
330
19
19
20
22
24.5
8
8
8
12
12
23
28
28
28
31
80
100
125
150
200
200
235
270
300
360
160
190
220
250
310
132
156
184
211
274
19
19
19
20
22
8
8
8
8
12
19
23
28
28
28
100
125
150
200
250
GS80GS100GS125GS150GS200
Material: Ductile Cast Iron Flange Standard: EN PN25
MODELA D1 D2
Suction flangeT N d dn2 A D1 D2
Discharge flangeT N ddn1
225
270
305
350
430
185
225
260
305
380
160
195
230
275
345
24
26
28
30
34
8
8
12
12
12
23
25
25
25
27
80
100
125
150
200
200
225
270
305
350
160
185
225
260
305
132
160
195
230
275
22
24
26
28
30
8
8
8
12
12
23
23
25
25
25
100
125
150
200
250
GS80GS100GS125GS150GS200
Unit: mm Flange Standard: JIS 20K Unit: mm
MODELA D1 D2
Suction flangeT N d dn2 A D1 D2
Discharge flangeT N ddn1
165
185
185
200
220
250
285
340
125
145
145
160
180
210
240
295
102
122
122
138
158
188
212
268
18
18
18
20
20
22
22
24
4
4
4
8
8
8
8
12
18
18
18
18
18
18
22
22
32
40
50
65
80
100
125
150
140
150
165
185
200
220
250
285
100
110
125
145
160
180
210
240
78
88
102
122
138
158
188
212
18
18
18
18
20
20
22
22
4
4
4
4
8
8
8
8
18
18
18
18
18
18
18
22
50
65
65
80
100
125
150
200
GSS32GSS40GSS50GSS65GSS80GSS100GSS125GSS150
Material: Stainless Steel Flange Standard: EN PN16
MODELA D1 D2
Suction flangeT N d dn2 A D1 D2
Discharge flangeT N ddn1
155
175
175
185
210
250
280
330
120
140
140
150
175
210
240
290
96
116
116
126
151
182
212
262
16
18
18
18
18
20
22
22
4
4
4
8
8
8
8
12
19
19
19
19
19
23
23
23
32
40
50
65
80
100
125
150
135
140
155
175
185
210
250
280
100
105
120
140
150
175
210
240
76
81
96
116
126
151
182
212
16
16
16
18
18
18
20
22
4
4
4
4
8
8
8
8
19
19
19
19
19
19
23
23
50
65
65
80
100
125
150
200
GSS32GSS40GSS50GSS65GSS80GSS100GSS125GSS150
Unit: mm Flange Standard: JIS 10K Unit: mm
12
3/8BAIR VENT
DRAINWITH PLUG
FLANGE
T
N×φd
SHAFT END
WITH PLUG
s1
h2
φdn2
φdn
1
m2
a
m1
h1
n3
n2
n1
s2
b
f
l
w
x
d
t
u1
AD2dn
D1
u2
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
DIMENSIONS
MODELPump Support Shaft end 1) Mass
(kg)Holes for boltsNominalDiameter
Unit: mm
1) Dimension to be considered by the manufacturer in respect of removal of inner parts of the Pump. The dimension X must not be idential with the distance between the shafts of the pump and the driving machine. The given dimension considers the use of flexible shaft couplings with spacer. The gap is necessary for the withdrawal of the rotor toward the driven side.2) h1 is 35mm higher than EN733 dimension.
dn1 dn2 a f h1 h2 Drainplug b m1 m2 n1 n2 n3 W s1 s2 d l t u1 u2 X GS GSS
32-125.1
32-125
32-160.1
32-160
32-200.1
32-200
32-250
40-125
40-160
40-200
40-250
40-315
50-125
50-160
50-200
50-250
50-315
65-125
65-160
65-200
65-250
65-315
80-160
80-200
80-250
80-315
80-315L
80-400
100-160
100-200
100-250
100-250L
100-315
100-315L
100-400
125-200
125-250
125-250L
125-315
125-400
125-500
150-200
150-250
150-315, 2)
150-400
150-400L
150-500
200-400
200-500
50
65
65
80
100
125
150
200
250
32
40
50
65
80
100
125
150
200
30
27
28
28
38
37
46
29
30
40
48
-
34
33
43
49
86
37
43
45
72
89
48
67
77
102
112
160
90
109
106
118
107
132
164
119
128
145
170
202
361
157
153
214
341
365
504
-
-
28
28
29
29
39
39
46
30
31
41
48
82
33
33
44
50
86
37
41
47
73
90
46
67
77
101
112
162
91
103
108
120
109
134
189
120
131
148
176
218
365
154
171
225
339
363
491
508
645
7
7
8
7
8
7
8
7
8
8
8
9
8
9
11
11
12
100
100
100
100
140
140
140
140
140
180
180
8
8
10
8
10
8
10
8
10
12
10
12
10
12
10
12
14
10
12
14
18
18
20
27
27
35
27
35
27
35
27
35
45
35
45
35
45
35
45
51.5
35
45
51.5
64
64
79.5
50
50
80
50
80
50
80
50
80
110
80
110
80
110
80
110
80
110
110
125
24
24
32
24
32
24
32
24
32
42
32
42
32
42
32
42
48
32
42
48
60
60
75
M12
M12
M12
M12
M12
M12
M12
M16
M12
M16
M16
M12
M12
M12
M12
M16
M12
M16
M16
M20
M16
M20
M20
M20
M24
260
260
340
260
340
260
340
260
340
370
340
370
340
370
340
370
500
340
370
500
500
630
110
110
110
110
110
110
110
140
110
140
140
160
140
190
250
160
190
212
250
280
190
212
250
280
212
250
280
315
250
280
315
355
280
315
400
315
400
450
400
450
560
190
240
320
210
240
265
320
345
240
265
320
345
280
320
360
400
320
345
400
435
360
400
500
400
500
550
500
550
660
70
95
70
95
70
95
95
120
95
120
120
150
120
150
150
250
100
125
100
125
100
125
125
160
125
160
160
200
160
200
200
315
50
65
50
65
50
65
65
80
65
80
80
100
80
100
100
100
1/4B
1/4B
1/4B
1/4B
1/4B
3/8B
3/8B
3/8B
1/2B
1/2B
140
160
180
225
140
160
180
225
250
160
180
200
225
280
180
200
225
250
280
225
250
280
315
355
250
280
315
355
315
355
400
450
355
375
400
450
560
560
630
112
132
160
180
112
132
160
180
225
132
160
180
225
160
180
200
225
180
200
250
280
200
225
250
280
250
280
315
375
280
315
375
385
435
360
360
470
360
470
360
470
360
470
530
470
530
470
530
470
530
670
470
530
670
670
820
80
100
80
100
125
100
125
100
125
125
125
140
140
180
160
180
180
200
Dimensions of Bare Shaft Pump
13END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
DIMENSIONS
14
Model GS/GSS with MotorSteel Baseplate (Fig. A) up to 90kW
Fabricated Baseplate (Fig. B) 110kW and over
BY
BW
h1h2
φdn2
ANCHOR BOLTHOLES n×Fd
COUPLINGGUARD
φdn
1
BJ
a
L
BN1 BM1 BN2
h1h2
φdn2
BYBW
ANCHOR BOLT HOLESn×Fd
COUPLINGGUARD
φdn
1
a
L
BM2 BN2BJBN1 BM1
This baseplate is not necessary to grout. Special baseplate can be provided for grouting.
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
**Except for Model GS 200 - 400
DIMENSIONS
15
Power
GS GSS GS GSS
0.75 80M 16.5 76 78
1.1 80M 18 78 80
1.5 90S 23 787 82 84
2.2 90L 27 812 87 89
3 100L 37.5 835 98 100
4 112M 47.5 23 855 110 112
5.5 132S 61 182 600 150 150 25 909 132 134
0.75 80M 16.5 76 75
1.1 80M 18 78 77
1.5 90S 23 787 82 81
2.2 90L 27 812 87 86
3 100L 37.5 835 98 97
4 112M 47.5 23 855 110 109
5.5 132S 61 132 131
7.5 132S 65 136 135
1.5 90S 23 787 88 87
2.2 90L 27 812 92 91
3 100L 37.5 835 105 104
4 112M 47.5 855 114 113
5.5 132S 61 131 130
7.5 132S 65 136 135
11 160M 105 210 660 170 170 400 450 4xM20 32 1051 189 188
2.2 90L 27 812 92 91
3 100L 37.5 835 105 104
4 112M 47.5 855 114 113
5.5 132S 61 131 130
7.5 132S 65 136 135
11 160M 105 189 188
15 160M 120 206 205
3 100L 37.5 835 117 116
4 112M 47.5 855 129 128
5.5 132S 61 145 144
7.5 132S 65 150 149
11 160M 105 199 198
15 160M 120 215 214
5.5 132S 61 145 143
7.5 132S 65 150 148
11 160M 105 199 197
15 160M 120 215 213
18.5 160L 135 1095 232 230
22 180M 175 230 440 490 35 1116 282 280
7.5 132S 65 600 150 150 31 929 169 169
11 160M 105 215 215
15 160M 120 231 231
18.5 160L 135 1115 248 248
22 180M 175 1136 288 288
30 200L 240 250 740 190 190 490 540 42 1234 370 370
1.5 90S 23 787 84 83
2.2 90L 27 812 89 88
3 100L 37.5 835 100 99
4 112M 47.5 23 855 112 111
5.5 132S 61 134 133
7.5 132S 65 138 137
11 160M 105 210 660 170 170 400 450 4xM20 32 1051 192 191
4 112M 47.5 540 130 130 23 855 116 115
5.5 132S 61 134 133
7.5 132S 65 138 137
11 160M 105 192 191
15 160M 120 208 207
18.5 160L 135 1095 225 224
7.5 132S 65 600 150 150 350 390 4xM16 25 929 152 151
11 160M 105 201 200
15 160M 120 217 216
18.5 160L 135 1115 234 233
22 180M 175 230 440 490 35 1136 284 283
30 200L 240 369 368
37 200L 270 402 401
11 160M 105 217 217
15 160M 120 233 233
18.5 160L 135 1115 250 250
22 180M 175 1136 291 291
30 200L 240 376 376
37 200L 270 409 409
45 225MA 315 300 840 205 205 550 610 66 1275 488 488
55 250MA 405 325 940 230 230 600 660 79 1385 609 609
22 180M 175 1271 355
30 200L 240 425
37 200L 270 458
45 225MA 315 300 550 610 66 1410 520
55 250MA 405 325 940 230 230 600 660 79 1520 641
75 280SA 515 380 1060 270 270 670 730 104 1636 802
BN2 BY BW nxFd(kg)
L kgFrame(kg)
h1 BJ BM1 BM2 BN1
41
48
82
Model Pole50 60 kW
Figdn1 dn2 a h2
(kg)
28
28
29
29
39
3932-200 2 A 50 32 80
180 38
32 80
-40-315 2 A 65 40 125
4xM24
1071
250 740 190 190 490
230
75
660
-
170 170
1369205 205490 540 4xM20 47
250
275
75
840
40-250 2 A 65 40 100 225 48
450
4xM20
321071
250 740 190 190 490 540
60 -660 170 170
400
540 42 1234
4xM24
440 490
4xM20
35
1051
40-200 2 A 65 40 100 180 40
210
25 909
210 660 170 170 400 450 4xM20 32
60 -
350 390 4xM16600 150 150
42 1234
40-160 2 A 65 40 80 160 30
182
360
4xM16
21
350 390182 600 150 150 25
60
540
-
130 130320
30
31
1071
40-125 2 A 65 40 80 140 29
162
4904xM20660 170 170 35225 46
23075 -
44032-250 2 A 50 32 100
909
46
909
660 170 170400 450
4xM2032
1051
150 150 350 390 4xM16 25
180 37210
60
600
-
909
660 170 170 400 450 4xM20 32 1051
130 130
350 390 4xM16
23
150 150 25210 60
540
-60032-200.1 2 A 50 32 80
909
210 660 170 170 400 450 4xM20 32 1051
390 4xM16
23
600 150 150 2560
540
-
130 130
350
909
32-160 2 A 50 32 80 160 28
182
130 130
350 390 4xM16
23
150 150 25
160 28182
60
540
-
600
32-160.1 2 A 50
320
736
350 390182 600 150 150 25 909
130 130320 360
4xM16
21
140 27
162
60
540
-
Total (Approx.)
32-125.1 2 A 50 32 80 140 30162
Hz Size Pump Moto Base
32-125 2 A 50 32 80
360
4xM16
21
736
350 390
60540
-130 130
DIMENSION-Model GS/GSS Pump with Moter-2P 50Hz/60Hz
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
Power
GS GSS GS GSS
15 160M 120 1206 300 18.5 160L 135 1250 317 22 180M 175 1271 356 30 200L 240 426 37 200L 270 459
45 225MA 315 300 550 610 66 1410 534 55 250MA 405 325 940 230 230 600 660 79 1520 657
22 180M 175 1271 370 30 200L 240 440 37 200L 270 473 45 225MA 315 300 550 610 66 1410 547 55 250MA 405 325 940 230 230 600 660 79 1520 670 75 280SA 515 1636 824
90 280MA 552 1686 865 110 315SA 800 1815 1193 132 315MA 900 1865 1303
37 200L 270 1384 508 45 225MA 315 1425 548 55 250MA 405 325 940 230 230 600 660 79 1535 671 75 280SA 515 1651 825 90 280MA 552 1701 875 110 315SA 800 1830 1193 132 315MA 900 1880 1303
90 A 280MA 552 380 90 1060 - 270 270 670 730 4xM24 104 1761 879 110 315SA 800 1890 1211 132 315MA 900 1940 1321 160 315LA 980 1414 200 315LA 1100 1555 220 355MA 1550 505 135 840 840 135 135 765 825 230 2279 2100
75 280SA 515 1711 849 90 280MA 552 1761 899 110 315SA 800 1890 1227 132 315MA 900 1940 1337 160 315LA 980 1438 200 315LA 1100 1570 45 225MA 315 840 205 205 550 610 66 1425 571 55 250MA 405 940 230 230 600 660 79 1535 680 75 280SA 515 1651 834 90 280MA 552 1701 883 110 315SA 800 1830 1206
132 315MA 900 1880 1316 75 280SA 515 1711 865 90 280MA 552 1761 914 110 315SA 800 1890 1242 132 315MA 900 1940 1352 160 315LA 980 1454 200 315LA 1100 1586
220 355MA 1550 2131 250 355MA 1650 2241
110 315SA 800 1890 1283 132 315MA 900 1940 1393 160 315LA 980 1495 200 315LA 1100 1627 220 355MA 1550 2162 250 355MA 1650 2285 37 200L 270 1404 600 45 225MA 315 1445 649 55 250MA 405 1555 745 75 280SA 515 1671 866 90 280MA 552 1721 915 110 315SA 800 1850 1254
132 315MA 900 1900 1364 110 315SA 800 1910 1278 132 315MA 900 1960 1388 160 315LA 980 1489 200 315LA 1100 1621 220 355MA 1550 2156 250 355MA 1650 2279
BN2 BY BW nxFd(kg)
L kg
future
future
future
future
future
future
future
future
future
future
2299
730 4xM24
92
690
6xM20
175
104
104
630 690
2040
2040
471369
120
134
120
148
176
154
171
Frame(kg)
h1 BJ BM1 BM2 BN1
1060
Model Pole50 60 kW
Fig1 2 a h2
(kg)
※Up to 55kW: EBARA motormore than 75kW: TECO motor(AESV)
185
760 760 190 2060
505 135 840 840 135
710
120 120 630 690
6xM20
135 765 825
160 375 future
465 120
710
120 630 690 6xM20 180
150-250 2 B 200 150
B 465 120 680 680 120
230
270 270 104
110
940
-
230 230
670
2279
150-200 2
A
200 150 160 355 future
380
2040
505 135 840 840 135 135 765 825 230
690
6xM20
185
760 760 190
120
710 710
120 120 630
170
2279
125-315 2 B 150 125 140 355 future
465
2040
505 135 840 840 135 135 765 825 230
120
B 465 120 680
760 760 180B
465 120
future
325
90 - 4xM24
380 1060 270 270
A
150 125 140
90 1060 -
630 690 6xM20
355 future
380
710
730 4xM24
140 315 future
380 90 1060
125-250L 2
A
150 125 140
670 730125-200 2
710
120
270 270 670 730 4xM24
630
100-315L 2
680 120 120
315
A
125 100
710
120 120 630 6906xM20
280 futureB
465 120
710
6xM20
175
760 760 180
104
B 465 120
710 710
120 120
- 270 270 670
100-250L 2 125 100 140
B 465 120 680 680 120
66
380 1060 270 270 670 730 104
-
205 205 550 610
4xM24
140 280
175
760 760 180
future
300
90
840
120 630 690 6xM20 175
100-250 2
A
125 100
B 465 120 680 680 120
120 630 690 6xM20 170
103
108
4xM24
380 1060 270 270 670 730 104
-
205 205490 540 4xM20
125 280 future
250
90
840
91
540 4xM20 47
1369
4xM24
100-200 2
A
125 100
90840
-205 205
490
100-160 2 A 125 100 125 250 future
250
Total (Approx.)Hz Size Pump Motor※
DIMENSIONS
16
Power
GS GSS GS GSS
2.2 90L 27 832 97 98 3 100L 37.5 855 110 111 4 112M 47.5 875 118 119 5.5 132S 61 136 137 7.5 132S 65 140 141 11 160M 105 194 195
15 160M 120 210 211 5.5 132S 61 139 139 7.5 132S 65 143 143 11 160M 105 192 192 15 160M 120 209 209
18.5 160L 135 1115 225 225 22 180M 175 230 440 490 35 1136 275 275 30 200L 240 250 740 190 190 490 540 42 1234 360 360
11 160M 105 204 203 15 160M 120 221 220 18.5 160L 135 1115 237 236 22 180M 175 230 440 490 35 1136 287 286 30 200L 240 372 371
37 200L 270 405 404 45 225MA 315 300 840 205 205 550 610 4xM24 66 1275 482 481
22 180M 175 230 660 170 170 440 490 35 1136 293 292 30 200L 240 378 377 37 200L 270 411 410 45 225MA 315 300 840 205 205 550 610 66 1275 490 489
55 250MA 405 325 940 230 230 600 660 79 1385 611 610 30 200L 240 430 430 37 200L 270 463 463 45 225MA 315 300 550 610 66 1410 524 524 55 250MA 405 325 940 230 230 600 660 79 1520 645 645 75 280SA 515 1636 797 797 90 280MA 552 1686 847 847 4 112M 47.5 540 130 130 26 875 130 130 5.5 132S 61 151 151 7.5 132S 65 155 155 11 160M 105 196 196
15 160M 120 213 213 18.5 160L 135 1115 229 229 22 180M 175 230 440 490 35 1136 281 281
7.5 132S 65 929 160 162 11 160M 105 201 203 15 160M 120 217 219 18.5 160L 135 1115 234 236 22 180M 175 230 440 490 35 1136 285 287
30 200L 240 370 372 37 200L 270 403 405
11 160M 105 216 214 15 160M 120 232 230 18.5 160L 135 1115 249 247 22 180M 175 1136 289 287 30 200L 240 375 373 37 200L 270 408 406
45 225MA 315 300 840 205 205 550 610 66 1275 486 484 55 250MA 405 325 940 230 230 600 660 79 1385 608 606
22 180M 175 1246 337 336 30 200L 240 407 406 37 200L 270 440 439 45 225MA 315 300 550 610 66 1385 514 513 55 250MA 405 325 940 230 230 600 660 79 1495 637 636 75 280SA 515 1611 791 790
90 280MA 552 1661 832 831 110 B 315SA 800 465 120 680 680 120 120 630 690 6xM20 175 1790 1160 1159
55 250MA 405 325 940 230 230 600 660 79 1520 651 650 75 280SA 515 1636 805 804 90 280MA 552 1686 855 854 110 315SA 800 1815 1173 1172 132 315MA 900 1865 1283 1282 11 160M 105 215 217 15 160M 120 231 233 18.5 160L 135 1140 248 250 22 180M 175 1161 288 290 30 200L 240 374 376
37 200L 270 407 409 45 225MA 315 300 840 205 205 550 610 66 1300 485 487 55 250MA 405 325 940 230 230 600 660 79 1410 606 608
22 180M 175 230 740 190 190 440 490 39 1271 316 316 30 200L 240 402 402 37 200L 270 435 435 45 225MA 315 300 550 610 66 1410 508 508 55 250MA 405 325 940 230 230 600 660 79 1520 630 630 75 280SA 515 1636 781 781
90 280MA 552 1686 822 822 45 225MA 315 300 840 205 205 550 610 66 1410 519 519 55 250MA 405 325 940 230 230 600 660 79 1520 641 641 75 280SA 515 1636 795 795 90 280MA 552 1686 845 845 110 315SA 800 1815 1164 1164
132 315MA 900 1865 1274 1274 90 A 280MA 552 380 90 1060 - 270 270 670 730 4xM24 104 1746 875 875 110 315SA 800 1875 1203 1203 132 315MA 900 1925 1313 1313 160 315LA 980 1414 1414 200 315LA 1100 1546 1546
2025
630 690 6xM20 175
80-315L 2 100 80 125 315 112 112B 465 120
710 710120 120 630 690 6xM20
175
760 760 180
1060 270 270 670 730 104
80-250 2A
100 80 125 280 77 7790 - 4xM24
380 1060 270 270 670 730 104
B 465 120 680 680 120 120
1096
250 740 190 190 490 540 42 1259
4xM24
80-200 2 A 100 80 125 250 67 67 75 -
4xM20250
840 205 205490 540 47 1369
4xM24
380
6xM20 170
80-160 2 A 100 80 125 225 46 48
230
75
660
-
170 170 440 490
4xM20
35
270 670 730 104
65-315 2
A
80 65 125 280 90 89
90 - 4xM24380 1060 270 270 670 730 104
B 465 120 680 680 120 120 630 690
740 190 190 490 540 42 1234
4xM24
65-250 2A
80 65 100 250 73 72
250
90
840
-
205 205490 540 4xM20 47
1344
4xM24
380 1060 270
4xM20
32 1071
250 740 190 190 490 540 42 1234
65-200 2 A 80 65 100 225 47 45
230
75
660
-
170 170 440 490
4xM20
35
1071
250
65-160 2 A 80 65 100 200 41 43
210
75
660
-
170 170400 450
4xM20 47 1369
4xM24
380 1060 270 270 670 730 104
65-125 2 A 80 65 100 180 37 37210
75 -400 450
4xM20660 170 170
32
929
1071
50-315 2 A 65 50 125 280 86 86
275
75
840
-
205 205490 540
42 1234
50-250 2 A 65 50 100 225 50 49 75 -
4xM20250 740 190 190 490 540 42 1234
4xM24
170400 450
4xM20
321071
50-200 2 A 65 50 100 200 44 43
210
60
660
-
170 170400 450
4xM20
321071
250 740 190 190 490 540
929
210 660 170 170 400 450 4xM20 32 1071
50-160 2 A 65 50 100 180 33 33
210
60
600
-
150 150 350 390 4xM16 25 929
660 170
100 160 33 34
182
60
540
-
130 130
350 390 4xM16
23
600 150 150 25
BN2 BY BW nxFd(kg)
L kgFrame(kg)
h1 BJ BM1 BM2 BN1Model Pole
50 60 kWFig
1 2 a h2(kg)
50-125 2 A 65 50
Total (Approx.)Hz Size Pump Motor※
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
DIMENSION-Model GS/GSS Pump with Moter-2P 50Hz/60Hz
Power
GS GSS GS GSS
15 160M 120 1206 300 18.5 160L 135 1250 317 22 180M 175 1271 356 30 200L 240 426 37 200L 270 459
45 225MA 315 300 550 610 66 1410 534 55 250MA 405 325 940 230 230 600 660 79 1520 657
22 180M 175 1271 370 30 200L 240 440 37 200L 270 473 45 225MA 315 300 550 610 66 1410 547 55 250MA 405 325 940 230 230 600 660 79 1520 670 75 280SA 515 1636 824
90 280MA 552 1686 865 110 315SA 800 1815 1193 132 315MA 900 1865 1303
37 200L 270 1384 508 45 225MA 315 1425 548 55 250MA 405 325 940 230 230 600 660 79 1535 671 75 280SA 515 1651 825 90 280MA 552 1701 875 110 315SA 800 1830 1193 132 315MA 900 1880 1303
90 A 280MA 552 380 90 1060 - 270 270 670 730 4xM24 104 1761 879 110 315SA 800 1890 1211 132 315MA 900 1940 1321 160 315LA 980 1414 200 315LA 1100 1555 220 355MA 1550 505 135 840 840 135 135 765 825 230 2279 2100
75 280SA 515 1711 849 90 280MA 552 1761 899 110 315SA 800 1890 1227 132 315MA 900 1940 1337 160 315LA 980 1438 200 315LA 1100 1570 45 225MA 315 840 205 205 550 610 66 1425 571 55 250MA 405 940 230 230 600 660 79 1535 680 75 280SA 515 1651 834 90 280MA 552 1701 883 110 315SA 800 1830 1206
132 315MA 900 1880 1316 75 280SA 515 1711 865 90 280MA 552 1761 914 110 315SA 800 1890 1242 132 315MA 900 1940 1352 160 315LA 980 1454 200 315LA 1100 1586
220 355MA 1550 2131 250 355MA 1650 2241
110 315SA 800 1890 1283 132 315MA 900 1940 1393 160 315LA 980 1495 200 315LA 1100 1627 220 355MA 1550 2162 250 355MA 1650 2285 37 200L 270 1404 600 45 225MA 315 1445 649 55 250MA 405 1555 745 75 280SA 515 1671 866 90 280MA 552 1721 915 110 315SA 800 1850 1254
132 315MA 900 1900 1364 110 315SA 800 1910 1278 132 315MA 900 1960 1388 160 315LA 980 1489 200 315LA 1100 1621 220 355MA 1550 2156 250 355MA 1650 2279
BN2 BY BW nxFd(kg)
L kg
future
future
future
future
future
future
future
future
future
future
2299
730 4xM24
92
690
6xM20
175
104
104
630 690
2040
2040
471369
120
134
120
148
176
154
171
Frame(kg)
h1 BJ BM1 BM2 BN1
1060
Model Pole50 60 kW
Fig1 2 a h2
(kg)
※Up to 55kW: EBARA motormore than 75kW: TECO motor(AESV)
185
760 760 190 2060
505 135 840 840 135
710
120 120 630 690
6xM20
135 765 825
160 375 future
465 120
710
120 630 690 6xM20 180
150-250 2 B 200 150
B 465 120 680 680 120
230
270 270 104
110
940
-
230 230
670
2279
150-200 2
A
200 150 160 355 future
380
2040
505 135 840 840 135 135 765 825 230
690
6xM20
185
760 760 190
120
710 710
120 120 630
170
2279
125-315 2 B 150 125 140 355 future
465
2040
505 135 840 840 135 135 765 825 230
120
B 465 120 680
760 760 180B
465 120
future
325
90 - 4xM24
380 1060 270 270
A
150 125 140
90 1060 -
630 690 6xM20
355 future
380
710
730 4xM24
140 315 future
380 90 1060
125-250L 2
A
150 125 140
670 730125-200 2
710
120
270 270 670 730 4xM24
630
100-315L 2
680 120 120
315
A
125 100
710
120 120 630 6906xM20
280 futureB
465 120
710
6xM20
175
760 760 180
104
B 465 120
710 710
120 120
- 270 270 670
100-250L 2 125 100 140
B 465 120 680 680 120
66
380 1060 270 270 670 730 104
-
205 205 550 610
4xM24
140 280
175
760 760 180
future
300
90
840
120 630 690 6xM20 175
100-250 2
A
125 100
B 465 120 680 680 120
120 630 690 6xM20 170
103
108
4xM24
380 1060 270 270 670 730 104
-
205 205490 540 4xM20
125 280 future
250
90
840
91
540 4xM20 47
1369
4xM24
100-200 2
A
125 100
90840
-205 205
490
100-160 2 A 125 100 125 250 future
250
Total (Approx.)Hz Size Pump Motor※
Baseplate
DIMENSIONS
17END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
DIMENSION-Model GS/GSS Pump with Moter-2P 50Hz/60HzPower
GS GSS GS GSS 15 160M 120 1206 300 299
18.5 160L 135 1250 317 316 22 180M 175 1271 356 355 30 200L 240 426 425 37 200L 270 459 458
45 225MA 315 300 550 610 66 1410 534 533 55 250MA 405 325 940 230 230 600 660 79 1520 657 656
22 180M 175 1271 370 376 30 200L 240 440 446 37 200L 270 473 479 45 225MA 315 300 550 610 66 1410 547 553 55 250MA 405 325 940 230 230 600 660 79 1520 670 676 75 280SA 515 1636 824 830
90 280MA 552 1686 865 871 110 315SA 800 1815 1193 1199 132 315MA 900 1865 1303 1309
37 200L 270 1384 508 506 45 225MA 315 1425 548 546 55 250MA 405 325 940 230 230 600 660 79 1535 671 669 75 280SA 515 1651 825 823 90 280MA 552 1701 875 873 110 315SA 800 1830 1193 1191 132 315MA 900 1880 1303 1301
90 A 280MA 552 380 90 1060 - 270 270 670 730 4xM24 104 1761 879 877 110 315SA 800 1890 1211 1209 132 315MA 900 1940 1321 1319 160 315LA 980 1414 1412 200 315LA 1100 1555 1553 220 355MA 1550 505 135 840 840 135 135 765 825 230 2279 2100 2098
75 280SA 515 1711 849 847 90 280MA 552 1761 899 897 110 315SA 800 1890 1227 1225 132 315MA 900 1940 1337 1335 160 315LA 980 1438 1436 200 315LA 1100 1570 1568 45 225MA 315 840 205 205 550 610 66 1425 571 570 55 250MA 405 940 230 230 600 660 79 1535 680 679 75 280SA 515 1651 834 833 90 280MA 552 1701 883 882 110 315SA 800 1830 1206 1205
132 315MA 900 1880 1316 1315 75 280SA 515 1711 865 862 90 280MA 552 1761 914 911 110 315SA 800 1890 1242 1239 132 315MA 900 1940 1352 1349 160 315LA 980 1454 1451 200 315LA 1100 1586 1583
220 355MA 1550 2131 2128 250 355MA 1650 2241 2238
110 315SA 800 1890 1283 1277 132 315MA 900 1940 1393 1387 160 315LA 980 1495 1489 200 315LA 1100 1627 1621 220 355MA 1550 2162 2156 250 355MA 1650 2285 2279 37 200L 270 1404 600 603 45 225MA 315 1445 649 652 55 250MA 405 1555 745 748 75 280SA 515 1671 866 869 90 280MA 552 1721 915 918 110 315SA 800 1850 1254 1257
132 315MA 900 1900 1364 1367 110 315SA 800 1910 1278 1260 132 315MA 900 1960 1388 1370 160 315LA 980 1489 1471 200 315LA 1100 1621 1603 220 355MA 1550 2156 2138 250 355MA 1650 2279 2261
250 540 4xM20 47
1369
4xM24
100-200 2
A
125 100
90840
-205 205
490
100-160 2 A 125 100 125 250 91
471369
4xM24
380 1060 270 270 670 730 104
-
205 205490 540 4xM20250
90
840
120 630 690 6xM20 175
100-250 2
A
125 100
B 465 120 680 680 120
120 630 690 6xM20 170
125 280 103
465 120 680 680 120
66
380 1060 270 270 670 730 104
-
205 205 550 610
4xM24
300
90
840
104
B 465 120
710 710
120 120
100-250L 2 125 100 140
175
760 760 180 2040
100-315L 2
A
125 100
710
120 120 630 6906xM20
280 120B
465 120
710
6xM20
175
760 760 180 2040
630 690
- 270 270 670 730 4xM24
140 315 134
380 90 1060
104
B 465 120 680 680 120 120
315 120
325
90 - 4xM24
380 1060 270 270
A
150 125 140 670 730
2040
505 135 840 840 135 135 765 825 230
120
710
120 630
2279
125-315 2 B 150 125 140 355 176465
125-250L 2
A
150 125 140
270 270 670 730 4xM24 104
355 148
380 90 1060 -
630 690 6xM20 170
2040
505 135 840 840 135 135 765 825 230
6906xM20
185
760 760 190120
710 710120 120 630
6xM20
175
760 760 180B465 120
710
730 4xM2492
1060 270 270 104
110940
-230 230
670
6xM20 180
150-250 2 B 200 150
B 465 120 680 680 120
230
150-200 2A
200 150 160 355 154380
765 825
160 375 171
465 120710
120 630 690
※1) Up to 55kW: EBARA motor more than 75kW: TECO motor(AESV)
Hz Size Motor ※1) Baseplate Total (Approx.)
2299
185
760 760 190 2060
505 135 840 840 135
710120 120 630 690
6xM20
135
157
Pump
Mass(kg)Model
h2aφ2φ1Fig
kW6050Pole
125-200 2
B
140 280 108
Mass(kg)
90
109
106
118
132
119
145
170
LMass(kg)
nxFdBWBYBN2BN1BM2BM1BJh1Mass(kg)
Frame
2279
690
DIMENSIONS
18
Power
GS GSS GS GSS
0.55 80M 15 75 77
0.75 80M 16.5 76 78
0.55 80M 15 75 76
0.75 80M 16.5 76 77
1.1 90S 22 787 81 82
0.55 80M 15 79 78
0.75 80M 16.5 80 79
1.1 90S 22 787 87 86
1.5 90L 24 812 89 88
0.55 80M 15 79 78
0.75 80M 16.5 80 79
1.1 90S 22 787 87 86
1.5 90L 24 812 89 88
0.55 80M 15 90 89
0.75 80M 16.5 92 91
1.1 90S 22 787 99 98
1.5 90L 24 812 101 100
2.2 100L 32 835 111 110
0.75 80M 16.5 736 92 90
1.1 90S 22 787 99 97
1.5 90L 24 812 101 99
2.2 100L 32 835 111 109
3 100L 37.5 835 118 116
0.75 80M 16.5 756 109 109
1.1 90S 22 807 116 116
1.5 90L 24 832 118 118
2.2 100L 32 129 129
3 100L 37.5 136 136
4 112M 47.5 876 147 147
5.5 132S 64.0 929 168 168
0.55 80M 15 77 76
0.75 80M 16.5 79 78
1.1 90S 22 787 83 82
1.5 90L 24 812 86 85
0.55 80M 15 81 80
0.75 80M 16.5 83 82
1.1 90S 22 787 89 88
1.5 90L 24 812 91 90
2.2 100L 32 101 100
3 100L 37.5 108 107
1.1 90S 22 807 101 100
1.5 90L 24 832 103 102
2.2 100L 32 113 112
3 100L 37.5 120 119
4 112M 47.5 876 132 131
5.5 132S 64 600 150 150 25 929 151 150
1.5 90L 24 832 120 120
2.2 100L 32 131 131
3 100L 37.5 138 138
4 112M 47.5 876 149 149
5.5 132S 64 929 170 170
7.5 132M 78 967 186 186
2.2 100L 32 171
3 100L 37.5 177
4 112M 47.5 1011 195
5.5 132S 64 1064 215
7.5 132M 78 1102 230
11 160M 105 1207 269
15 160L 130 1251 296
0.55 80M 15 83 84
0.75 80M 16.5 85 86
1.1 90S 22 807 91 92
1.5 90L 24 832 94 95
2.2 100L 32 855 103 104
0.55 80M 15 84 84
0.75 80M 16.5 86 86
1.1 90S 22 807 92 92
1.5 90L 24 832 94 94
2.2 100L 32 105 105
3 100L 37.5 112 112
4 112M 47.5 876 123 123
1.1 90S 22 807 104 103
1.5 90L 24 832 106 105
2.2 100L 32 117 116
3 100L 37.5 124 123
4 112M 47.5 876 135 134
5.5 132S 64 929 154 153
7.5 132M 78 967 169 168
2.2 100L 32 133 132
3 100L 37.5 140 139
4 112M 47.5 876 151 150
5.5 132S 64 929 172 171
7.5 132M 78 967 188 187
11 160M 105 660 170 170 35 1071 219 218
4 112M 47.5 1011 198 198
5.5 132S 64 1064 219 219
7.5 132M 78 1102 234 234
11 160M 105 1207 273 273
15 160L 130 1251 300 300
18.5 180M 175 1271 359 359
22 180L 190 1309 379 379
48
82
33
33
44
50
86
Model Pole
Hz
Fig
Size Pump Motor※ Total (Approx.)
50 60 kW 1 2 a h2(kg)
Frame(kg)
h1 BJ BM1 BM2 BN1 BN2 BY BW nxFd(kg)
L kg
660
-
170 170
440
490
49 230 75600
-50-250 4 A 65 50 100
540 47
490
4xM20
35
740 190 190 39
840 205 205
75
4xM16
23855
600 150 150 25
210 60
540
-
130 130
756
855
855
50-315 4 A 65 50 125 280 86 275
150 150440 490 4xM20
31225
100 160 34 182
440 490 4xM20
31 990
660
50-200 4 A 65 50 100 200 43
130 130 350 390 4xM16 23180 33 210 60 540 -
350 390
- 150 150 440 490 4xM20100 225 48 230
390 4xM16 23
756
50-160 4 A 65 50 100
60 540 - 130 130 350
39
50-125 4 A 65 50
40-250 4 A 65 40
210 60540
-130 130
170 170 35
740
275 75
600
-
150 150
190 190
31
40-315 4 A 65 40 125 250
40-200 4 A 65 40 100 180 40
130 130 350 390 4xM16 23160 30 182 60 540 -
350 390 4xM1623
31
41
40-160 4 A 65 40 80
130 320
855
40-125 4 A 65 40 80 140 29 162
150 150 440 490 4xM20 31
736
835
46
30
225 46 230 75 600 -32-250 4 A 50 32 100
130 130 350 390 4xM1639180 37 210 60 540 -
60 540 - 130
390 4xM16 23
736
32-200 4 A 50 32 80
60 540 - 130 130 3503932-200.1 4 A 50 32 80 180 38 210
130 130 350 390 4xM16 23160 28 182 60 540 -2932-160 4 A 50 32 80
60 540 - 130 130 350
736
32-160.1 4 A 50 32 80 160 28 182
130 130 320 360 4xM16 21
4xM16 23
736
29
32-125.1 4 A 50 32 80 140
140 27 162 60 540 -32-125 4 A 50 32 80
130 320 360 4xM16 2128
28
390
73630 162 60 540 - 130
736
23
360 4xM16 21
736
75 600
855
855
DIMENSION-Model GS/GSS Pump with motor-4P 50Hz/60Hz
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
Power
GS GSS GS GSS
4 112M 47.5 1046 337
5.5 132S 64 1099 358
7.5 132M 78 1137 374
11 160M 105 1242 410
15 160L 130 1286 437
18.5 180M 175 1306 488
22 180L 190 1344 508
15 160L 130 1346 457
18.5 180M 175 1366 510
22 180L 190 1404 527
30 200L 255 1464 607
37 225SC 315 1510 672
45 225MC 330 1535 698
55 250MC 450 1615 822
75 280SB 566 1060 270 270 104 1731 950
18.5 180M 175 1366 571
22 180L 190 1404 588
30 200L 255 1464 669
37 225SC 315 1510 736
45 225MC 330 1535 761
55 250MC 450 1615 909
75 280SB 566 1731 1058
90 280MB 624 1781 1122
110 315SB 800 1940 1346
132 315MB 900 1990 1456
37 225SC 315 1510 861
45 225MC 330 1535 887
55 250MC 450 1615 1035
75 280SB 566 1731 1173
90 280MB 624 1781 1237
55 250MC 450 1060 270 270 104 1755 1061
75 280SB 566 1871 1215
90 280MB 624 1921 1288
110 315SB 800 2080 1502
132 315MB 900 2130 1612
160 315LB 990 845 845 200 2230 1735
55 250MC 450 1060 270 270 104 1775 1210
75 280SB 566 1891 1365
90 280MB 624 1941 1429
110 315SB 800 2100 1673
132 315MB 900 2150 1796
160 315LB 990 1900
200 315LB 1160 2087
220 355MB 1550 2643
250 355MB 1650 2753
315 355LB 1900 3028
75 280SB 566 1891 1449
90 280MB 624 1941 1513
110 315SB 800 2100 1752
132 315MB 900 2150 1875
160 315LB 990 1984
200 315LB 1160 2183
220 355MB 1550 2712
250 355MB 1650 2822
315 355LB 1900 3097
375 355CB 2340 1000 1000 430 2691 3643
160 315LB 990 2105
200 315LB 1160 2304
220 355MB 1550 2843
250 355MB 1650 2953
315 355LB 1900 2671 3249
375 355CB 2340 1070 1070 380 2861 3743
508
645
154
171
225
339
363
Model Pole
Hz
Fig
Size Pump Motor※ Total (Approx.)
50 60 kW 1 2 a h2(kg)
Frame(kg)
h1 BJ BM1 BM2 BN1 BN2 BY BW nxFd(kg)
L kg
※Up to 55kW: EBARA motormore than 75kW: TECO motor(AESV)
2420
610975 975
755 825 6xM22370
2669220 220
680 740 6xM20 260
630 future
585
220
870 870
200-500 4 B 250 200 200
2250
560900 900
755 825 6xM22390 2499
235
740 740 280
795 795 290
650
220 220
680 740 6xM20
180 560 future
535
220
650
755 825 6xM22 340 2499
200-400 4 B 250 200
550 125 945 945 125 125
150-500 4
B
525 115
790 790
115 115 630 690
475 110 -
670 730 4xM241200 300 300
160 450 future
415 110 -
845 845
790115 115 630
491
B 465 115790
670 730 4xM241200 300 300
A
200 150 180 560 future 6xM20
690
940
-
230
92
225 2250
117
220
1060 270 270 104
150-400L 4
A
200 150
-
230 230
670 730 4xM24160 450 future 415 110
940
6xM20190
117
230 670 730 4xM24
120 630 690 6xM20 185
150-400 4 A 200 150
B 465 120 710 710 120
230
670 730 4xM24
92
1060 270 270 104
future
415 110
730 4xM2492
150-315 4
A
200 150 160 400
110940
-230 230
670
92
150-250 4 A 200 150 160 375 future 380
- 230150-200 4 A 200 150 160 355 future 380 110 940 future
future
future
future
future
future
future
future
Power
GS GSS GS GSS
0.55 80M 15 92 92
0.75 80M 16.5 93 93
1.1 90S 22 807 100 100
1.5 90L 24 832 102 102
2.2 100L 32 112 112
3 100L 37.5 119 119
0.75 80M 16.5 756 98 100
1.1 90S 22 807 104 106
1.5 90L 24 832 106 108
2.2 100L 32 117 119
3 100L 37.5 124 126
4 112M 47.5 876 135 137
5.5 132S 64 660 170 170 32 929 158 160
1.5 90L 24 832 119 117
2.2 100L 32 130 128
3 100L 37.5 137 135
4 112M 47.5 876 148 146
5.5 132S 64 929 169 167
7.5 132M 78 967 184 182
11 160M 105 660 170 170 35 1071 216 214
3 100L 37.5 965 178 177
4 112M 47.5 986 190 189
5.5 132S 64 1039 211 210
7.5 132M 78 1077 226 225
11 160M 105 1181 264 263
15 160L 130 1226 293 292
7.5 132M 78 1102 273 272
11 160M 105 1207 307 306
15 160L 130 1251 335 334
18.5 180M 175 1271 384 383
22 180L 190 1309 405 404
30 200L 255 1369 472 471
1.1 90S 22 832 116 118
1.5 90L 24 857 118 120
2.2 100L 32 129 131
3 100L 37.5 136 138
4 112M 47.5 901 147 149
5.5 132S 64 954 168 170
7.5 132M 78 992 183 185
2.2 100L 32 153 153
3 100L 37.5 159 159
4 112M 47.5 1011 175 175
5.5 132S 64 1064 196 196
7.5 132M 78 1102 211 211
11 160M 105 1206 242 242
15 160L 130 1251 271 271
5.5 132S 64 1064 241 241
7.5 132M 78 1102 257 257
11 160M 105 1207 291 291
15 160L 130 1251 319 319
18.5 180M 175 1271 362 362
22 180L 190 1309 382 382
11 160M 105 1207 321 322
15 160L 130 1251 349 350
18.5 180M 175 1271 402 403
22 180L 190 1309 418 419
30 200L 255 1369 493 494
37 225SC 315 1415 555 556
45 225MC 330 1440 572 573
11 160M 105 1267 390 388
15 160L 130 1311 418 416
18.5 180M 175 1331 480 478
22 180L 190 1369 497 495
30 200L 255 1429 578 576
37 225SC 315 1475 643 641
45 225MC 330 1500 668 666
55 250MC 450 600 660 79 1580 798 796
75 280SB 566 1696 940 938
90 280MB 624 1746 1012 1010
37
41
101
162
Model Pole
Hz
Fig
Size Pump Motor※ Total (Approx.)
50 60 kW 1 2 a h2(kg)
Frame(kg)
h1 BJ BM1 BM2 BN1 BN2 BY BW nxFd(kg)
L kg
104
125 355 160
380 1060 270 270 670
-
205 205
550 610
4xM24
730
355
90
840
80-400 4 A 100 80
102 325 90 840 - 205
610 4xM24 66
80-315 4 A 100 80 125 315
90 840 - 205 205 550
66
940 230 23074
990
660 170 170 35
740 190
75
600
-
150 150
440
190
67
77
205 550 610 4xM24 66
100 80 125
39
46
80-250 4 A 100 80 125 280 77 275
490 4xM20
31
65-315 4 A 80 65 125 90
880
80-200 4 A 100 80 125 250 67 230
150 150 440 490 4xM20 31225 48 230 75 600 -80-160 4 A
47
250 72 250 90
740
-
840
490 4xM2031
47
73
205 205 550 610 4xM24 66280 89 300 90 840 -
855
65-250 4 A 80 65 100
75600
-150 150
440
855
65-200 4 A 80 65 100 225 45 230
130
190 190
490 540 4xM20
42
205 205
4xM20 26
130400 450 4xM20
26200 43 210
756
855
210 75 540 - 130 130
75540
-65-160 4 A 80 65 100
400 45065-125 4 A 80 65 100 180 37
DIMENSIONS
19END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
DIMENSION-Model GS/GSS Pump with motor-4P 50Hz/60Hz
Power
GS GSS GS GSS
4 112M 47.5 1046 337
5.5 132S 64 1099 358
7.5 132M 78 1137 374
11 160M 105 1242 410
15 160L 130 1286 437
18.5 180M 175 1306 488
22 180L 190 1344 508
15 160L 130 1346 457
18.5 180M 175 1366 510
22 180L 190 1404 527
30 200L 255 1464 607
37 225SC 315 1510 672
45 225MC 330 1535 698
55 250MC 450 1615 822
75 280SB 566 1060 270 270 104 1731 950
18.5 180M 175 1366 571
22 180L 190 1404 588
30 200L 255 1464 669
37 225SC 315 1510 736
45 225MC 330 1535 761
55 250MC 450 1615 909
75 280SB 566 1731 1058
90 280MB 624 1781 1122
110 315SB 800 1940 1346
132 315MB 900 1990 1456
37 225SC 315 1510 861
45 225MC 330 1535 887
55 250MC 450 1615 1035
75 280SB 566 1731 1173
90 280MB 624 1781 1237
55 250MC 450 1060 270 270 104 1755 1061
75 280SB 566 1871 1215
90 280MB 624 1921 1288
110 315SB 800 2080 1502
132 315MB 900 2130 1612
160 315LB 990 845 845 200 2230 1735
55 250MC 450 1060 270 270 104 1775 1210
75 280SB 566 1891 1365
90 280MB 624 1941 1429
110 315SB 800 2100 1673
132 315MB 900 2150 1796
160 315LB 990 1900
200 315LB 1160 2087
220 355MB 1550 2643
250 355MB 1650 2753
315 355LB 1900 3028
75 280SB 566 1891 1449
90 280MB 624 1941 1513
110 315SB 800 2100 1752
132 315MB 900 2150 1875
160 315LB 990 1984
200 315LB 1160 2183
220 355MB 1550 2712
250 355MB 1650 2822
315 355LB 1900 3097
375 355CB 2340 1000 1000 430 2691 3643
160 315LB 990 2105
200 315LB 1160 2304
220 355MB 1550 2843
250 355MB 1650 2953
315 355LB 1900 2671 3249
375 355CB 2340 1070 1070 380 2861 3743
508
645
154
171
225
339
363
Model Pole
Hz
Fig
Size Pump Motor※ Total (Approx.)
50 60 kW 1 2 a h2(kg)
Frame(kg)
h1 BJ BM1 BM2 BN1 BN2 BY BW nxFd(kg)
L kg
※Up to 55kW: EBARA motormore than 75kW: TECO motor(AESV)
2420
610975 975
755 825 6xM22370
2669220 220
680 740 6xM20 260
630 future
585
220
870 870
200-500 4 B 250 200 200
2250
560900 900
755 825 6xM22390 2499
235
740 740 280
795 795 290
650
220 220
680 740 6xM20
180 560 future
535
220
650
755 825 6xM22 340 2499
200-400 4 B 250 200
550 125 945 945 125 125
150-500 4
B
525 115
790 790
115 115 630 690
475 110 -
670 730 4xM241200 300 300
160 450 future
415 110 -
845 845
790115 115 630
491
B 465 115790
670 730 4xM241200 300 300
A
200 150 180 560 future 6xM20
690
940
-
230
92
225 2250
117
220
1060 270 270 104
150-400L 4
A
200 150
-
230 230
670 730 4xM24160 450 future 415 110
940
6xM20190
117
230 670 730 4xM24
120 630 690 6xM20 185
150-400 4 A 200 150
B 465 120 710 710 120
230
670 730 4xM24
92
1060 270 270 104
future
415 110
730 4xM2492
150-315 4
A
200 150 160 400
110940
-230 230
670
92
150-250 4 A 200 150 160 375 future 380
- 230150-200 4 A 200 150 160 355 future 380 110 940 future
future
future
future
future
future
future
future
DIMENSIONS
20END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
DIMENSION-Model GS/GSS Pump with motor-4P 50Hz/60HzPower
GS GSS GS GSS 2.2 100L 32 192 191
3 100L 37.5 198 197
4 112M 47.5 1011 210 209
5.5 132S 64 1064 230 229
7.5 132M 78 1102 246 245
4 112M 47.5 1011 223 229
5.5 132S 64 1064 243 249
7.5 132M 78 1102 259 265
11 160M 105 1207 299 305
15 160L 130 1251 326 332
18.5 180M 175 1271 370 376
5.5 132S 64 1079 277 275
7.5 132M 78 1117 293 291
11 160M 105 1222 327 325
15 160L 130 1266 354 352
18.5 180M 175 1286 408 406
22 180L 190 1324 424 422
30 200L 255 1384 491 489
7.5 132M 78 1117 295 293
11 160M 105 1222 330 328
15 160L 130 1266 358 356
18.5 180M 175 1286 410 408
22 180L 190 1324 427 425
30 200L 255 1384 507 505
37 225SC 315 1430 564 562
45 225MC 330 1455 580 578
15 160L 130 1326 476 451
18.5 180M 175 1346 530 505
22 180L 190 1384 546 521
30 200L 255 1444 627 602
37 225SC 315 1490 692 667
45 225MC 330 1515 718 693
55 250MC 450 1595 842 817
75 280SB 566 1711 969 944
90 280MB 624 1761 1042 1017
5.5 132S 64 1079 291 290
7.5 132M 78 1117 307 306
11 160M 105 1222 342 341
15 160L 130 1266 370 369
18.5 180M 175 1286 419 418
22 180L 190 1324 439 438
11 160M 105 1222 354 351
15 160L 130 1266 382 379
18.5 180M 175 1286 435 432
22 180L 190 1324 451 448
30 200L 255 1384 531 528
37 225SC 315 1430 588 585
45 225MC 330 1455 605 602
15 160L 130 1326 462 456
18.5 180M 175 1346 516 510
22 180L 190 1384 532 526
30 200L 255 1444 613 607
37 225SC 315 1490 678 672
45 225MC 330 1515 703 697
55 250MC 450 1595 828 822
75 280SB 566 1060 270 270 104 1711 955 949
22 180L 190 1384 580 564
30 200L 255 1444 661 645
37 225SC 315 1490 728 712
45 225MC 330 1515 754 738
55 250MC 450 1595 901 885
75 280SB 566 1711 1040 1024
90 280MB 624 1761 1104 1088
110 315SB 800 1920 1338 1322
132 315MB 900 1970 1448 1432
30 200L 255 1624 840 836
37 225SC 315 1670 908 904
45 225MC 330 1695 933 929
55 250MC 450 1775 1071 1067
75 280SB 566 1891 1226 1222
90 280MB 624 1941 1290 1286
110 315SB 800 2100 1535 1531
132 315MB 900 2150 1645 1641
160 315LB 990 845 845 225 2250 1762 1758
L
125 250 90 250
190 190
490
91
90 840 -
103
540 4xM20 42
100-200 4 A 125 100 125
90 740 - 190 190 490100-160 4 A 125 100
108
540 4xM20
42
205 205 47
280 109 250 90
740 -
840 -
205 205 550 610 4xM24 66280 106 300100-250 4 A 125 100 140
100-400 4 A 125 100 140 355 164 380 110
940 -
1060 -
109
189
230 230
670 730 4xM24
92
270 270 104
66315 107 325 90 840 -100-315 4 A 125 100 140 205 205 550 610 4xM24
550 610 4xM24 66315 119 325 90 840 -120
125-250 4 A 150 125 140 131
205 205125-200 4 A 150 125 140
205 205 550 610 4xM24 66355 128 325 90 840 -
355 170 380 110940
-125-315 4 A 150 125 140 176
92
1060 270 270 104
230 230670 730 4xM24
92
361
475
218
365
140 400
940
125-400 4
A
202
415 110 -
465 120 710
150 125
B 710
110
1060
-
270 270
220B 525 115
790 790115
125-500 4
A
150 125 180 450
730
104
117
670
115 630 690 6xM20
4xM24
1200
Model Pole Fig
Total (Approx.)
50 60 kW φ1 φ2 a h2
Mass(kg) Frame
Mass(kg)
h1 BJ BM1 BM2 BN1 BN2 BY BW nxFdMass(kg)
Hz Size Pump Motor ※1) Baseplate
Mass(kg)
990
300 300
※1) Up to 55kW: EBARA motor more than 75kW: TECO motor(AESV)
185
670 730 4-M24
120 120 630 690 6-M20
230 230
DIMENSIONS
21END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
DIMENSION-Model GS/GSS Pump with motor-4P 50Hz/60HzPower
GS GSS GS GSS 4 112M 47.5 1046 337 340
5.5 132S 64 1099 358 361
7.5 132M 78 1137 374 377
11 160M 105 1242 410 413
15 160L 130 1286 437 440
18.5 180M 175 1306 488 491
22 180L 190 1344 508 511
15 160L 130 1346 457 439
18.5 180M 175 1366 510 492
22 180L 190 1404 527 509
30 200L 255 1464 607 589
37 225SC 315 1510 672 654
45 225MC 330 1535 698 680
55 250MC 450 1615 822 804
75 280SB 566 1060 270 270 104 1731 950 932
18.5 180M 175 1366 571 560
22 180L 190 1404 588 577
30 200L 255 1464 669 658
37 225SC 315 1510 736 725
45 225MC 330 1535 761 750
55 250MC 450 1615 909 898
75 280SB 566 1731 1058 1047
90 280MB 624 1781 1122 1111
110 315SB 800 1940 1346 1335
132 315MB 900 1990 1456 1445
37 225SC 315 1510 861 863
45 225MC 330 1535 887 889
55 250MC 450 1615 1035 1037
75 280SB 566 1731 1173 1175
90 280MB 624 1781 1237 1239
55 250MC 450 1060 270 270 104 1755 1061 1063
75 280SB 566 1871 1215 1217
90 280MB 624 1921 1288 1290
110 315SB 800 2080 1502 1504
132 315MB 900 2130 1612 1614
160 315LB 990 845 845 200 2230 1735 1737
55 250MC 450 1060 270 270 104 1775 1210 1223
75 280SB 566 1891 1365 1378
90 280MB 624 1941 1429 1442
110 315SB 800 2100 1673 1686
132 315MB 900 2150 1796 1809
160 315LB 990 1900 1913
200 315LB 1160 2087 2100
220 355MB 1550 2643 2656
250 355MB 1650 2753 2766
315 355LB 1900 3028 3041
75 280SB 566 1891 1449 -
90 280MB 624 1941 1513 -
110 315SB 800 2100 1752 -
132 315MB 900 2150 1875 -
160 315LB 990 1984 -
200 315LB 1160 2183 -
220 355MB 1550 2712 -
250 355MB 1650 2822 -
315 355LB 1900 3097 -
375 355CB 2340 1000 1000 430 2691 3643 -
160 315LB 990 2105 -
200 315LB 1160 2304 -
220 355MB 1550 2843 -
250 355MB 1650 2953 -
315 355LB 1900 2671 3249 -
375 355CB 2340 1070 1070 380 2861 3743 -
Model Pole
Hz
Fig
Size Pump Motor ※1) Baseplate
BY nxFdBJ BM2 BN1 BN2
160 355 157 380 110 940150-200 4 A 200 150
150-315 4
A
200 150 160 400
110940
150-250 4 A 200 150 160 375 153 380
214
415 110
92
730 4xM2492
-230 230
670
92- 230
150-400L 4
A
200 150
-
230 230
670160 450 341 415 110
940
150-400 4 A
B
200 150
225
117
220
1060 270 270 104
190
117670 730 4xM24
1200 300 300-
845
730 4xM24
6xM20
6xM22
A
200 150 180 560 504 6xM20
690
-
160 450 365
415 110
790115 115 630465 115
790
670 7301200 300 300
340550 125 945 945 125 125
150-500 4
B
525 115
790 790
115 115 630 690
475 110
845
4xM24
755 825
120 630 690 6xM20 185B 465 120 710 710 120
230
670 730 4xM24
92
1060 270 270
940
-
230
230 670 730 4xM24
104
Total (Approx.)
50 60 kW φ1 φ2 a h2
Mass(kg) Frame
Mass(kg)
h1 BM1 BWMass(kg)
L
Mass(kg)
220
870 870
220 220
680 740
200-400 4 B 250 200 180 560 508
535
220
650 650
220 220
680 740
200-500 4 B 250 200 200 630 645
585
235
740 740 280
795 795 290
560900 900
755 825 6xM22390
6xM20
※1) Up to 55kW: EBARA motor more than 75kW: TECO motor(AESV)
154
171
225
339
363
491
-
-
6xM20 260
610975 975
755 825 6xM22370
2250
2499
2250
2499
2420
2669
SECTIONAL VIEW
No. Part name
CASING
PROTECTOR
CASING COVER
IMPELLER
SHAFT
KEY
KEY
SPACER
IMPELLER NUT(A)
IMPELLER NUT(B)
BEARING HOUSING
BEARING COVER
BALL BEARING
DEFLECTOR
Qty
1
2
1
1
1
1
1
1
1
1
1
1
2
2
001
010
018
021
031
039-1
039-2
042
048-1
048-2
051
053
056
093
No. Part name
STAY
CASE WEAR RING
CASE WEAR RING
MECHANICAL SEAL
O-RING
BOLT
BOLT
BOLT
BOLT
BOLT
PLAIN WASHER
SPRING LOCK WASHER
PLUG
PLUG
Qty
1
1
1
1
1
-
6
1
4
4
1
1
1
1
095
107-1
107-2
111
115
120-1
120-2
120-3
120-4
120-5
137-1
137-2
193-1
193-2
22END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
001 021193-1
193-2
107-1
107-2137-2 137-1
018
039-1 039-2
031
115
111120-1 120-2 053051 056093
095 120-3042 120-4 010048-2
120-5
048-1
Mechanical sealType
031120-5
SECTIONAL VIEW
No. Part name
CASING
PROTECTOR
CASING COVER
IMPELLER
SHAFT
KEY
KEY
SHAFT SLEEVE
IMPELLER NUT(A)
IMPELLER NUT(B)
BEARING HOUSING
BEARING COVER
BALL BEARING
LANTERN RING
GLAND
DEFLECTOR
Qty
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
2
001
010
018
021
031
039-1
039-2
041
048-1
048-2
051
053
056
090
091
093
No. Part name
STAY
CASE WEAR RING
CASE WEAR RING
O-RING
GASKET
GLAND PACKING
BOLT
BOLT
BOLT
BOLT
BOLT
GLAND BOLT
PLAIN WASHER
SPRING LOCK WASHER
PLUG
PLUG
Qty
1
1
1
1
1
4
-
6
1
4
4
2
1
1
1
1
095
107-1
107-2
115
117
119
120-1
120-2
120-3
120-4
120-5
124
137-1
137-2
193-1
193-2
001 021193-1
193-2
107-1
107-2137-2 137-1
018
039-1 039-2115
120-1 120-2 053051 056093
095 120-3041 010048-2
124117 090
120-4119 091
GLAND PACKINGType
23END SUCTION VOLUTE PUMP MODEL GS/GSS
EBARA reserves the right to make changes without prior notice.
048-1
MATERIALS
24
●:Standard ○:OptionalNo.
001
010
018
021
031
039-1
039-2
042
048-1
048-2
051053056093095
107
111
115
120-1
120-2,3,4,5
137-1
137-2
193-1
193-2
CASING
PROTECTOR
CASING COVER(conical)
IMPELLER
SHAFT
KEY
KEY
SPACER
IMPELLER NUT(A)
IMPELLER NUT(B)BEARING HOUSINGBEARING COVERBALL BEARINGDEFLECTORSTAY
CASE WEAR RING
MECHANICAL SEAL
O-RING
BOLT
BOLT
PLAIN WASHER
SPRING LOCKWASHER
PLUG
PLUG
Cast ironDuctile cast iron304 Stainless steel316 Stainless steelDuplex stainless steelCarbon steelCast ironDuctile cast iron304 Stainless steel316 Stainless steelDuplex stainless steelCast iron (*1)Ductile cast iron (*2)Bronze304 Stainless steel316 Stainless steelDuplex stainless steel
Cr. steel
Duplex stainless steel (*3)
12% Cr. steel316 Stainless steelDuplex stainless steelCarbon steel304 Stainless steel316 Stainless steelDuplex stainless steel304 Stainless steel316 Stainless steelDuplex stainless steel304 Stainless steel316 Stainless steelCast ironCast ironSteel (*4)EPDMCarbon steelBronzeCast iron316 Stainless steelDuplex stainless steelSiC/carbon/FKM (*5)SiC/carbon/EPDM (*5)Tc/carbon/EPDM (*6)SiC/SiC/EPDM/HAS-C (*5)NBRFKM (*7)EPDMCarbon steel316 Stainless steel
Carbon steel
304 Stainless steel316 Stainless steel304 Stainless steel316 Stainless steelCarbon steel304 Stainless steel316 Stainless steelDuplex stainless steelCarbon steel304 Stainless steel316 Stainless steelDuplex stainless steel
FC250FCD400SCS13SCS14A---SPCCFC250FCD400SCS13SCS14A---FC200FCD400CAC406SCS13SCS14A---SUS431eq.or SUS420J2SUS329J3L/S35CSUS420J2SUS316SUS329J3LS50CSUS304SUS316SUS329J3LSUS304SUS316SUS329J3LSUS304SUS316FC150FC150------SPHCCAC406FC150SUS316SUS329J3L---------------------SSSUS316
SS
SUS304SUS316SUS304SUS316SSSUS304SUS316SUS329J3LSSSUS304SUS316SUS329J3L
A278-35A536-60-40-18A351-CF8A351-CF8MA890-1B (CD4MCuN)A569A278-35A536-60-40-18A351-CF8A351-CF8MA890-1B (CD4MCuN)A278-30A536-60-40-18B584-C83600A351-CF8A351-CF8MA890-1B (CD4MCuN)A276-431or A276-420 eq.A276-S31803 /Grade1035A276-420A276-316A276-S31803A576-1050A276-304A276-316A276-S31803A276-304A276-316A276-S31803A276-304A276-316A48-20A48-20------A569B584-C83600A48-20A276-316A276-S31803---------------------A283-DA276-316
A283-D
A276-304A276-316A276-304A276-316A283-DA276-304A276-316A276-S31803A283-DA276-304A276-316A276-S31803
EN-GJL-250 (EN-JL1040)EN-GJS-400-15 (5.3106)GX5CrNi19-10 (1.4308)GX5CrNiMo19-11-2 (1.4408)GX2CrNiMoCuN-25-6-3-3 (1.4517)DC01 (1.0330)EN-GJL-250 (EN-JL1040)EN-GJS-400-15 (5.3106)GX5CrNi19-10 (1.4308)GX5CrNiMo19-11-2 (1.4408)GX2CrNiMoCuN-25-6-3-3 (1.4517)EN-GJL-200 (EN-JL1030)EN-GJS-400-15 (5.3106)CuSn5Zn5Pb5 (CC491K)GX5CrNi19-10 (1.4308)GX5CrNiMo19-11-2 (1.4408)GX2CrNiMoCuN-25-6-3-3 (1.4517)X17CrNi16-2 (1.4057)or X30Cr13 (1.4028) eq.X2CrNiMoN22-5-3 (1.4462) /C35X30Cr13 (1.4028)X5CrNiMo17-12-2 (1.4401)X2CrNiMoN22-5-3 (1.4462)C50 (1.0540)X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)X2CrNiMoN22-5-3 (1.4462)X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)X2CrNiMoN22-5-3 (1.4462)X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)EN-GJL-150 (EN-JL1020)EN-GJL-150 (EN-JL1020)---------CuSn5Zn5Pb5 (CC491K)EN-GJL-150 (EN-JL1020)X5CrNiMo17-12-2 (1.4401)X2CrNiMoN22-5-3 (1.4462)------------------------X5CrNiMo17-12-2 (1.4401)
---
X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)---X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)X2CrNiMoN22-5-3 (1.4462)---X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)X2CrNiMoN22-5-3 (1.4462)
●○
●●○
●●
●
●
●●
●
●
●●●●●●
●○○
●○○●
●
●
●
●
●
●○
●●○
●●
●
●
●●
●
●
●●●●●
●
●○○
●○○●
●
●
●
●
●
●○
●●○
●
●
●
●●
●
●
●●●●●●
●○○
●○○●
●
●
●
●
●
●○
●●○
○
○
○
●●
●
●
●●●●●
●
●○○
●○○●
●
●
●
●
●
●
●
●
●
●
●
●●
●
●
●●●●●
●
●○○
●○●
●
●
●
●
●
○
●
○
○
●
●
●
○
○
○●●●●●
●
●○○
●○●
●
○
○
○
○
○●
○
○
●
○●
○
○NANA●●●●●
○
○
●○
○
●
NANANANA
○
○
G2 G3Material group
G4 A1 A2 D1G1ISO or EN equivalentASTM equivalentJIS MaterialMaterialName of part
Materials of mechanical seal application (conical type)
(*1) Except pumps model GS100-400, 125-400, 125-500, 150-400, 150-500, 200-400 and 200-500,impellers made of cast iron are applied for all pumps.
(*2) Impellers made of ductile cast iron are applied only the pumps model GS100-400, 125-400, 125-500,150-400, 150-500, 200-400 and 200-500.
(*3) Duplex stainless steel is used for wetted part only. The remaining atmospheric side of shaft is made ofcarbon steel.
(*4) Deep groove ball bearing,single row / Vacuum degassed steel(*5) Elastomer bellows seal (*6) O ring/Spring (*7) Viton
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
25
MATERIALS
●:Standard ○:OptionalNo.
018
041
090
091
117
119
124
CASING COVER(cylindrical)
SHAFT SLEEVE
LANTERN RING
GLAND
GASKET
GLAND PACKING
GLAND BOLT
Cast iron304 Stainless steel316 Stainless steelDuplex stainless steel304 Stainless steel316 Stainless steelDuplex stainless steel
Cast iron
Bronze304 Stainless steel316 Stainless steelCast ironBronze304 Stainless steel316 Stainless steelJoint sheet gasket (*9)Silicone carbide fiberpacking (*10)12% Cr. steelBrass304 Stainless steel316 Stainless steel
FC250SCS13SCS14A---SUS304SUS316---
FC150 or 200
CAC406SCS13SUS316FC150CAC406SCS13SUS316---
---
SUS403C3604BDSUS304SUS316
A278-35A351-CF8A351-CF8MA890-1B (CD4MCuN)A276-304A276-316A890-1B (CD4MCuN)
A48-20 or 30
B584-C83600A351-CF8A276-316A48-20B584-C83600A351-CF8A276-316---
---
A276-403B16-C36000A276-304A276-316
EN-GJL-250 (EN-JL1040)GX5CrNi19-10 (1.4308)GX5CrNiMo19-11-2 (1.4408)GX2CrNiMoCuN-25-6-3-3 (1.4517)X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)GX2CrNiMoCuN-25-6-3-3 (1.4517)EN-GJL-150 (EN-JL1020)or EN-GJL-200 (EN-JL1030)CuSn5Zn5Pb5 (CC491K)GX5CrNi19-10 (1.4308)X5CrNiMo17-12-2 (1.4401)EN-GJL-150 (EN-JL1020)CuSn5Zn5Pb5 (CC491K) GX5CrNi19-10 (1.4308)X5CrNiMo17-12-2 (1.4401)---
---
------X5CrNi18-10 (1.4301)X5CrNiMo17-12-2 (1.4401)
●
●
●
●
●
●
●
●
●
○
○
●
●
○
●
●
●
●
●
●
●
●
●
○
○
●
●
○
●
●
●
●
●
●
●
○
○
○
○●
●
○
NA
NA
NA
NANANANANANANANA
NA
NANANANA
G2 G3Material group
G4 A1 D1A2G1ISO or EN equivalentASTM equivalentJIS MaterialMaterialName of part
Materials of gland packing application (*8)
MaterialGroup
G1
G2
G3
G4
A1
A2
D1
Cast ironorDuctile cast iron
304 Stainless steel
316 Stainless steel
Duplex stainless steel
Cast iron or Ductile cast iron
Cast iron or Ductile cast iron
Bronze
304 Stainless steel
304 Stainless steel
316 Stainless steel
Duplex stainless steel
Bronze
Cast iron
Bronze
Cast iron
316 Stainless steel
316 Stainless steel
Duplex stainless steel
Cr.steel
Cr.steel
Cr.steel
Duplex stainless steel
Duplex stainless steel
Duplex stainless steel
Duplex stainless steel
Cast iron casing,Cast iron impeller withBronze case wear ringAll wetted parts areIron material. Cast iron casing,Bronze impeller withBronze case wear ring Cast iron casing,Stainless steel impeller withDuplex stainless steel shaft304/316 Stainless steel wetted parts withDuplex stainless steel shaft316 Stainless steel wetted parts with Duplexstainless steel shaftAll wetted parts areDuplex stainless steel
Shaft, 031 NotesCase WearRing, 107Impeller, 021Casing, 001 and
Casing Cover, 018
Explanation of Material Group
(*8) The components which constitute the gland packing pump are these parts instead of P/N 018, 042and 111 of the mechanical seal pump.
(*9) V#6500AC(*10) P#6501L
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
26
MEMO
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.
27
MEMO
END SUCTION VOLUTE PUMP MODEL GS/GSSEBARA reserves the right to make changes without prior notice.