Date post: | 31-Mar-2015 |
Category: |
Documents |
Upload: | shamar-coffey |
View: | 245 times |
Download: | 1 times |
GSM Architecture
2
Network Components
• Switching System(SS)• Base Station System(BSS)
3
BTS
MSC VLR
HLR
PSTNISDN
DataNetworks
Air interface
OSS
BTS
BTS
MSC VLR
BSCBSC
A Interface
A-bis interface
4
BGW
SOG
OSS
ERICSSON’S GSM SYSTEM ARCHITECTURE
SCF
MIN SDP
EIR AUC
HLR
Switching System
ILR
MSC/VLRDTI SSF
MC(MXE)GMSC
Other PLMNsz
ISDN
PSTNPublic Data
Networks
5
TRC
BSC
RBS
Base Station System
6
Basic or Additional
Abbrev.
System
Full component name Platform
Basic
BasicBasicBasicBasicBasicBasicBasicBasicBasicBasicBasicAdditional Additional Additional Additional Additional Additional
MSC/VLR
GMSCHLRILRAUCEIRDTITRCBSCBTSOMCNMCMCSSPSCPSDPSOGBGW
SS
SSSSSSSSSSSSBSSBSSBSSOSSOSSSSSSSSSS
Mobile service Switching Center/Visitor Location RegisterGateway MSCHome Location Register Interworking Location RegisterAuthentication CenterEquipment Identity RegisterData Transmission InterfaceTRanscoder Controller Base Station Controller Base Transceiver Station Operation and Maintenance CenterNetwork Management CenterMessage CenterService Switching Point Service Control Point Service Data Point Service Order GatewayBilling Gateway
AXE
AXEAXEAXEUnix/AXEUnixAXEAXEAXERBSTMOS TMOSMXEAXEAXEUnix UnixUnix
7
Network Structure• Cell A cell is the basic unit of a
cellular system and is defined as the radio coverage given by one BS antenna system.
Each cell is assigned a unique CGI.
8
LOCATION AREA
A LA is defined as a group of cells.Within the network, a subsriber’s location is known by the LA which they are in.
The identity of the LA in which an MS is currently located is stored in the VLR. (LAI)
Network Structure
9
Cells & LA
MSC
VLR
LA1
LA2
LA3
LA6LA4
LA5
C1C2 C3
C6 C5C4
C=CELL
10
Network Structure
• MSC Service Area An MSC Service Area is made
up of LAs and represents the geographical part of the network controlled by one MSC.
11
MSC Service Area
MSC
VLRLA1
LA2LA3
LA6LA4
LA5
12
Network Structure• PLMN SERVICE AREA A PLMN service area is the entire
set of cells served by one network operator
and is defined as the area in which an operator offers radio coverage and access to its network.
13
PLMN Service Area
V
MSC
MSC
MSC
MSC
VLR
VLRVLR
I
II
IVIII
I
14
Network Structure
• GSM SERVICE AREA The GSM service area is the entire
geographical area in which a subscriber can gain access to a GSM network.
15
Relation between areas in GSM
Location AreaCell
Location AreaMSC Service AreaPLMN Service Area
GSM Service Area
16
Mobile Station
GSM MSs consist of:
• Mobile Equipment
• Subscriber Identity Module
17
Functions of Mobile Station• Voice and data transmission&
receipt• Frequency and time
synchronization• Monitoring of power and signal
quality of the surrounding cells • Provision of location updates even
during inactive state
18
Mobile Station
• Discontinuous Transmission(DTX)• Discontinuous reception(DRX)• MS identified by unique IMEI • STAR#06#
19
SIM
Fixed data stored for the subscription:
• IMSI,• Authentication Key, Ki• Security Algorithms:kc,A3,A8 • PIN&PUK
20
SIM•Temporary network data:
Location area of subscriber and forbidden PLMNs
•Service data:
language preference, advice of charge
21
KEY TERMSAn MS can have one of the following states :
• Idle: the MS is ON but a call is not in progress.
• Active: the MS is ON and a call is in progress.
• Detached: the MS is OFF.
22
The following table defined the key terms used to describe GSM mobile traffic cases (there are no traffic cases in detached mode):
Mode
Term Description
Idle Registration
Roaming
International Roaming
This is the process in which an MS informs a network that it is attached.
When an MS moves around a network in idle mode, it is referred to as roaming.
When an MS moves into a network which is not its home network, it is referred to as international roaming. MSs can only roam into networks with which the home network has a roaming agreement.
23
Mode Term Description
Active
Location Updating
Paging
Handover
An MS roaming around the network must inform the network when it enters a new LA. This is called location updating.
This is the process whereby a network attempts to contact a particular MS. This is achieved by broadcasting a paging message containing the identity of that MS.
This is the process in which control of a call is passed from one cell to another while the MS moves between cells.
24
Network Identities• MSISDN• IMSI• TMSI• MSRN• IMEI
25
MSISDN• Mobile Station ISDN Number• The MSISDN is registered in the telephone directory and
used by the calling party for dialing.• MSISDN shall not exceed 15 digits.• NDC--National Destination Code• SN--Subscriber Number
CC NDC SN
1 to 3 digits Variable Variable
MSISDN : not more than 15 digits
26
IMSI• International mobile subscriber
Identity• The IMSI is an unique identity which is
used internationally and used within the network to identify the mobile subscribers.
• The IMSI is stored in the subscriber identity module (SIM), the HLR, VLR database.
27
IMSI3 digits
MCC MNC MSIN
3 digits Not more than 9 digits
NMSI
IMSI : Max. 15 digits
MCC--Mobile Country Code, MNC--Mobile N/W Code, MSIN--Mobile Station Identification Number
NMSI--National Mobile Station Identity,assigned by Individual Administration.
Mobile station Identification Number. It identifies the subs. In a PLMN. First 3 digit identifies the Logical HLR-id of Mobile subs.
28
Temporary Mobile subscriber Identity
• TMSI is a temporary IMSI no. made known to an MS at registration.
• The VLR assigns a TMSI to each mobile subscribers entering the VLR area.
• Assigned only after successful authentication.
• TMSI has only local significance i.e. within VLR area & controlled by the VLR.
• TMSI changes on location updation.• TMSI is less than 8 digit.
29
MSRNMobile Station Roaming Number
• The MSRN is used in the GMSC to set up a connection to the visited MSC/VLR.
• MSRN--is a temporary identity which is assigned during the establishment of a call to a roaming subs.
CC NDC SN
CC--Country Code, NDC--National Destination Code, SN– Servicing Node
30
IMEI• International Mobile Equipment
Identity• The IMEI is an unique code allocated to
each mobile equipment. It is checked in the EIR.
• IMEI check List White List Grey List Black List
31
BASE STATION SYSTEM (BSS)BASE STATION SYSTEM (BSS)
n BTS n BTS
BSC
BSC
BSC
MSC/VLR
BSSBSS
32
FUNCTIONS OF BTS
• Radio resources• Signal Processing• Signaling link management• Synchronization• Local maintenance handling• Functional supervision and
Testing
33
FUNCTIONS OF BSC
• Radio Network management • RBS Management• TRC Handling• Tx. Network Management• Internal BSC O&M• Handling of MS connections
34
MSC-BSS Configurations
BTSBTS
BTS
BTS BTS
BTS
A-bisBSC
BSSMSC AA-bis
36
Switching System (SS)
MSC
(PSTN)
VLR
HLR AUC
EIR
D
C
SS7 Signalling
Traffic Path
F
(BSS)
A
EOtherMSC
37
MSC Functions • Switcing and call routing• Charging• Service provisioning• Communication with HLR• Communication with VLR• Communication with other MSCs• Control of connected BSCs
38
MSC Functions • Echo canceller operation control
• Signaling interface to databases like HLR, VLR.
• Gateway to SMS between SMS centers and subscribers
• Handle interworking function while working as GMSC
39
VISITOR LOCATION REGISTER (VLR)
• It controls those mobiles roaming in its area.
• VLR reduces the number of queries to HLR
• One VLR may be incharge of one or more LA.
• VLR is updated by HLR on entry of MS its area.
• VLR assigns TMSI which keeps on changing.
• IMSI detach and attach operation
40
Data in VLR• IMSI & TMSI• MSISDN • MSRN.• Location Area• Supplementary service parameters• MS category• Authentication Key
41
Home Location Register(HLR)
• Reference store for subscriber’s parameters, numbers, authentication & Encryption values.
• Current subscriber status and associated VLR.
• Both VLR and HLR can be implemented in the same equipment in an MSC.
• one PLMN may contain one or several HLR.
42
Home Location Register(HLR)
• Permanent data in HLR• Data stored is changed only by commands.
• IMSI, MS-ISDN number.
• Category of MS ( whether pay phone or not )
• Roaming restriction ( allowed or not ).
• Supplementary services like call forwarding
43
Home Location Register(HLR)
• Temporary data in HLR• The data changes from call to call & is
dynamic
• MSRN
• RAND /SRES and Kc
• VLR address , MSC address.
• Messages waiting data used for SMS
44
EQUIPMENT IDENTITY REGISTER ( EIR )
• This data base stores IMEI for all registered mobile equipments and is unique to every ME.
• Only one EIR per PLMN.
• White list : IMEI, assigned to valid ME.• Black list : IMEI reported stolen• Gray list : IMEI having problems like faulty
software, wrong make of equipment etc.
45
AUthentication Center (AUC)
To authenticate the subs. attempting to use a network.
AUC is connected to HLR which provides it with authentication parameters and ciphering keys used to ensure network security.
46
AUC Functions
To perform subscriber authentication and to establish ciphering procedures on the radio link between the network and MS.
47
Information provided is called a TRIPLET consists of:
1. RAND(non predictable random number)
2. SRES(Signed response)
3. Kc(ciphering key)
AUC Functions
48
The centralized operation of the various units in the system and functions needed to maintain the subsystems.
Dynamic monitoring and controlling of the network
Operations and Maintenance Centre
OMC
Operations and Maintenance Centre
OMC
49
-O&M data function
-Configuration management
--Fault report and alarm handling
-Performance supervision/management
-Storage of system software and data
Functions Of OMC
Functions Of OMC