GSMtelephone based door entry systemsThe new GSM range from BPT Security Systems is a telephone based door entry solution. Using GSM mobile or landline technology, this system is designed for applications where a hard wired door entry system cannot be installed. Telephone based technology is ideal for use in environments where there is an excessive distance between a gated entrance and the main building or applications where the entry panel needs to call a conventional or mobile phone.
The GSM entry panel range includes versions of all BPT entry panels as well as VR and brass panels manufactured in the UK to the highest standards. Bespoke unit can also be produced to suit every requirement
single text programming
easy proGRammE VoicE GUiDE
loW ENERGY coNSUmptioN
334
BPt
sys
tem
tec
hnol
ogy
GsM
automatic text alerts
adjustable time out function
extra secure configuration335
BPt
sys
tem
tec
hnol
ogy
GsM
Entr
y sy
stem
Kits
336
GSm entryA vandal resistant low cost GsM entry solution
GsM Entry available from April 2014. Exact model appearance may slightly vary kit by kit
features• IP54 Rated• GSM / GPRS Quad Band 900/1800 MHz • microSIM card slot (Push-Pull mode)• SMS programming• Two relays• Each relay, door opening time can be configured
time by SMS• Up to 5 stored Numbers• Relay Type: AC/DC dual use, Load Voltage (peak
AC) 60V, Load current 500mA• Illuminated• Flush mounted
SYStEm tYpe
The BPT GSM Entry range is a sleek and cost effective GSM solution, providing all of the basic functions of a GSM unit in a hard wearing entry panel. The steel front plate and poly carbonate surround, make the Targha GSM unit both stylish and hard wearing.
taRGHa GSm ENtRY
sEcURE siDE
TARGHA GSM ENTRY
SIM REQUIRED
PSU
BPt
sys
tem
tec
hnol
ogy
GsM
En
try
Entr
y sy
stem
Kits
337
flex ible relays
Available with up to four buttons standard or two buttons with keypad
Each relay can be activated in 3 ways:
• During an active call by pressing asterisk or hash on the mobile keypad.• By telephone : the GSM module recognizes the incoming number and activates the relay 1 or 2
(upon programming)• Sending an SMS text to the device
dimensions
W (mm) H (mm) D (mm)
Wall-mounted 99 207 35
Recessed 135 243 6.5(*)
w
DH
* Exact dimensions supplied with instructions
Article Keypad Code Description
7 TAGSM/1 Targha VR GSM 1 Button
7 TAGSM/2 Targha VR GSM 2 Button
7 TAGSM/4 Targha VR GSM 4 Button
standard
Article Keypad Code Description
3 TAKGSM/1 Targha VR with Keypad GSM 1 Button
3 TAKGSM/2 Targha VR with Keypad GSM 2 Button
keypad
TAGSM/1 TAGSM/2 TAGSM/4
BPt
sys
tem
tec
hnol
ogy
GsM
En
try
l ithos gsm plUS+Versatile feature packed 1-4 call button complete kit
The Lithos GSM is a compact unit with brushed stainless steel frontplate in a modern design. Up to four illuminated push buttons, can be fitted giving maximum flexibility without the need to change the panel. Capable of storing up to ten numbers with dual flexible relays and all of the advanced features of bpt GSM plus. 12vDC @460mA active current (180mA in standby) PSTN Landline connection kit also available
GSm plUS+ features• Programmable in a single text• Seperate control unit on secure side• Quick remote entry release• Timed text alerts• Entry preview • Easy programe voice guide • Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays• Surface mounted
338
SYStEm tYpe
litHoS GSm plUS+
sEcURE siDE
LITHOS GSM+
CONTROL UNIT
SIM REQUIRED
PSU
11
2
1
3
2
4
1 button 2 buttons 3-4 buttons
one flex ible K it - multiple configurations
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
W (mm) H (mm) D (mm)
Wall-mounted 99 207 30
Recessed 135 243 6.5(*) / (**)
w
DH
Wall-mounted
W
W D
3.5D
H H
W
W D
3.5D
H H
Recesseddimensions
one flex ible K it - multiple configurationsLithos GSM Plus is supplied in a single kit with a variety of push button types and an optional stainless steel surround, making the Lithos GSM Plus truly vesatile. Each kit can be configured for either single or multi button use.
Code Description
LIGSM 1-4 button Lithos GSM KIT (Requires SIM card)
complete k it
Lithos GSM panel
LRS Rainshield
x 2
x 1
x 2
DPSSingle
Pushbutton
DPDDouble
Pushbutton
Control Unit
Antenna
DPHDouble-height
Pushbutton
339
PSU
complete k it includes:
*Flush mount kit required SEE PAGE 171 FOR DETAILS
x 1
x 1 x 1
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
thangram gsm plUS+Versatile feature packed 1-8 call button complete kit
The Thangram GSM Plus is a modular unit with metal effect front plate and high gloss black surround in a modern design. Up to eight illuminated push buttons can be fitted or two buttons and coded access keypad giving maximum flexibility without the need to change the panel. Capable of storing up to ten numbers with dual flexible relays and all of the advanced features of BPT GSM plus. 12vDC @460mA active current (180mA in standby). PSTN Landline connection kit also available
GSm plUS+ features
• Programmable in a single text• Seperate control unit on secure side• Quick remote entry release• Timed text alerts• Entry preview • Easy programe voice guide• Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays• Surface mount
340
SYStEm tYpe
sEcURE siDETHANGRAM
GSM+
CONTROL UNIT
SIM REQUIRED
LANDLINE ACTIVATION
MOBILEACTIVATION
PSU
11
2
123
UNUSED
1357
2468
1234
1 button 2 button 3 button 4 button 5 - 8 button
1 1 2
1 buttonwith keypad
2 button with keypad
one flex ible K it - multiple configurations
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
W (mm) H (mm) D (mm)
Wall-mounted 99 254 25
Recessed 127 281 2 (*)(**)
w
DH
dimensions
one flex ible K it - multiple configurationsThangram GSM Plus is supplied in a kit with a selection of push button types and an optional keypad, making the Thangram GSM Plus truly versatile. Each kit can be configured for either single or multi button use.
H H
W D W
DWall-mounted Recessed
(*) Embedding box: depth 54.5 mm; protrusion from wall: 2 mm.
(**) FLUSH MOUNT KIT REqUIRED
SEE PAGE 183/186 FOR EMBEDDING BOX DETAILS
complete k it includes:
341
Thangram GSM+ panel DPS
Single Pushbutton
DPDDouble
Pushbutton
Control Unit
Antenna
DPHDouble-height
Pushbutton
DNAKeypad
PSU
Code Description
THKGSM 1 flexible kit (1-8 buttons or 1 button keypad/2 button keypad)
complete k it
x 2
x 4
x 1
x 4 x 1
DTH MEDouble height
blank
x 1
x 1 x 1
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
GSM VANDAL RESISTANT FINISHES
VR - Brushed stainless steel
A Classic brushed stainless steel finish
Produced from 304 Grade Stainless steel and engineered to the highest standards. Brushed stainless steel has proven to be durable and versatile to compliment any surrounding. Panels are finished with high precision black laser engraving.(316 marine grade steel version avialable at additional cost).
BL - Satin black
A sleek semi gloss finish
Manufactured from 304 Grade Stainless steel and powder coated with a hard wearing semi gloss black powder coat. The BL range of panels are the last word in understated elegance. High precision laser engraving in silver provides contrast and impact.
342
BPt
sys
tem
tec
hnol
ogy
GsM
GSM VANDAL RESISTANT FINISHES
HP- H ighly polished steel
A stylish mirror finish
Made with 304 Grade Stainless steel polished to achieve a mirrored chrome effect. The HP panels provide an alternative to brushed steel for applications requiring a less industrial look without any compromise. Panels are finished with high precision black laser engraving.
BR - classic Brass
An alternative to steel.
Produced from CZ108 unlaquered solid brass to achieve a timeless appearance. BR panels offer and alternative to the vandal resistant range to compliment many heritage applications. Panels are finished with high precision black laser engraving.
343
BPt
sys
tem
tec
hnol
ogy
GsM
vandal resistant gsm plUS+Brushed stainless steel finish
The VR GSM Plus is a hard wearing vandal resistant panel finished in brushed stainless steel with user name windows. 1-4 button kits are available and with illuminated coded access keypad if required. Capable of storing up to ten numbers with dual flexible relays and all of the advanced features of bpt GSM plus. 12vDC @460mA active current (180mA in standby. PSTN Landline connection kit also available.
GSm plUS+ features• Programmable in a single text• Secure seperate control unit• Quick remote entry release• Timed text alerts• Entry preview • Easy programe voice guide• Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays• Surface mount
Article Keypad Code Description
7 VRGSM/1 1 button GSM KIT (Requires SIM card)
7 VRGSM/2 2 Button GSM Kit (Requires SIM card)
7 VRGSM/3 3 Button GSM Kit (Requires SIM card)
7 VRGSM/4 4 Button GSM Kit (Requires SIM card)
standard
Article Keypad Code Description
3 VRKGSM/1 1 button GSM KIT with coded access keypad (Requires SIM card)
3 VRKGSM/2 2 Button GSM Kit with coded access keypad (Requires SIM card)
3 VRKGSM/3 3 Button GSM Kit with coded access keypad (Requires SIM card)
3 VRKGSM/4 4 Button GSM Kit with coded access keypad (Requires SIM card)
keypad
Note: Kits supplied surface mount, Flush versions available
344
SYStEm tYpe
Button/Keypad Dimensions
1 Button 175mm H x 100mm W x 40mm D
1 Button with Keypad and 2 Button 225mm H x 100mm W x 45mm D
3 and 4 button (with or without keypad) 295mm H x 100mm W x 45mm D
40mm
45mm
45mm
225mm175mm 295mm
100mm 100mm 100mm
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
satin black GSm plUS+satin black finish
The BL GSM Plus is a hard wearing vandal resistant panel finished in Satin Black with user name windows. 1-4 button kits are available and with illuminated coded access keypad if required. Capable of storing up to ten numbers with dual flexible relays and all of the advanced features of bpt GSM plus. 12vDC @460mA active current (180mA in standby). PSTN Landline connection kit also available.
GSm plUS+ features• Programmable in a single text• Secure seperate control unit• Quick remote entry release• Timed text alerts• Entry preview • Easy programe voice guide• Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays• Surface mount
Article Keypad Code Description
7 BLGSM/1 1 button GSM KIT (Requires SIM card)
7 BLGSM/2 2 Button GSM Kit (Requires SIM card)
7 BLGSM/3 3 Button GSM Kit (Requires SIM card)
7 BLGSM/4 4 Button GSM Kit (Requires SIM card)
standard
Article Keypad Code Description
3 BLKGSM/1 1 button GSM KIT with coded access keypad (Requires SIM card)
3 BLKGSM/2 2 Button GSM Kit with coded access keypad (Requires SIM card)
3 BLKGSM/3 3 button GSM KIT with coded access keypad (Requires SIM card)
3 BLKGSM/4 4 button GSM KIT with coded access keypad (Requires SIM card)
keypad
Note: Kits supplied surface mount, Flush versions available
345
SYStEm tYpe
Button/Keypad Dimensions
1 Button 175mm H x 100mm W x 40mm D
1 Button with Keypad and 2 Button 225mm H x 100mm W x 45mm D
3 and 4 button (with or without keypad) 295mm H x 100mm W x 45mm D
40mm
45mm
45mm
225mm175mm 295mm
100mm 100mm 100mm
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
Highly polished gsm plUS+Highly polished finish
The HP GSM Plus is a hard wearing vandal resistant panel finished in highly polished stainless steel with user name windows. 1-4 button kits are available and with illuminated coded access keypad if required. Capable of storing up to ten numbers with dual flexible relays and all of the advanced features of bpt GSM plus. 12vDC @460mA active current (180mA in standby) PSTN Landline connection kit also available.
Article Keypad Code Description
7 HPGSM/1 1 button GSM KIT (Requires SIM card)
7 HPGSM/2 2 Button GSM Kit (Requires SIM card)
7 HPGSM/3 3 button GSM KIT (Requires SIM card)
7 HPGSM/4 4 button GSM KIT (Requires SIM card)
standard
Article Keypad Code Description
3 HPKGSM/1 1 button GSM KIT with coded access keypad (Requires SIM card)
3 HPKGSM/2 2 Button GSM Kit with coded access keypad (Requires SIM card)
3 HPKGSM/3 3 button GSM KIT with coded access keypad (Requires SIM card)
3 HPKGSM/4 4 button GSM KIT with coded access keypad (Requires SIM card)
keypad
Note: Kits supplied surface mount, Flush versions available
346
SYStEm tYpe
GSm plUS+ features• Programmable in a single text• Secure seperate control unit• Quick remote entry release• Timed text alerts• Entry preview • Easy programe voice guide• Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays• Surface mount
Button/Keypad Dimensions
1 Button 175mm H x 100mm W x 40mm D
1 Button with Keypad and 2 Button 225mm H x 100mm W x 45mm D
3 and 4 button (with or without keypad) 295mm H x 100mm W x 45mm D
40mm
45mm
45mm
225mm175mm 295mm
100mm 100mm 100mm
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
classic brass GSm plUS+classic brass finish
The BR GSM Plus is a Solid brass unlaquered panel with user name windows. 1-4 button kits are available and with illuminated coded access keypad if required. Capable of storing up to ten numbers with dual flexible relays and all of the advanced features of bpt GSM plus. 12vDC @460mA active current (180mA in standby) PSTN Landline connection kit also available
Article Keypad Code Description
7 BRGSM/1 1 button GSM KIT (Requires SIM card)
7 BRGSM/2 2 Button GSM Kit (Requires SIM card)
7 BRGSM/3 3 Button GSM Kit (Requires SIM card)
7 BRGSM/4 4 Button GSM Kit (Requires SIM card)
standard
Article Keypad Code Description
3 BRKGSM/1 1 button GSM KIT with coded access keypad (Requires SIM card)
3 BRKGSM/2 2 Button GSM Kit with coded access keypad (Requires SIM card)
3 BRKGSM/3 3 button GSM KIT with coded access keypad (Requires SIM card)
3 BRKGSM/4 4 button GSM KIT with coded access keypad (Requires SIM card)
keypad
Note: Kits supplied surface mount, Flush versions available
347
SYStEm tYpe
GSm plUS+ features• Programmable in a single text• Secure seperate control unit• Quick remote entry release• Timed text alerts• Entry preview • Easy programe voice guide• Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays• Surface mount
Button/Keypad Dimensions
1 Button 175mm H x 100mm W x 40mm D
1 Button with Keypad and 2 Button 225mm H x 100mm W x 45mm D
3 and 4 button (with or without keypad) 295mm H x 100mm W x 45mm D
40mm
45mm
45mm
225mm175mm 295mm
100mm 100mm 100mm
BPt
sys
tem
tec
hnol
ogy
GsM
Plu
s+
348
pStN landline k its
SYStEm tYpe
pStN features
The BPT PSTN is a sleek and cost effective PSTN solution, providing all of the basic functions of a PSTN unit in a range of hard wearing entry panels.
sEcURE siDETHANGRAM
PSTN
• Secure seperate control unit• Quick remote entry release• Timed text alerts• Entry preview • Easy programme voice guide • Low energy consumption• Cost saving time out function• Unique security pin• Flexible dual relays
CONTROL UNIT LANDLINE
PHONE NETWORK
*DEDICATED PSTN LINE REQUIRED
PSTN LINE
BPt
sys
tem
tec
hnol
ogy
Pst
n
349
Code Description
LILND Lithos Landline kit
litHoS pStN
Code Description
THKLND Thangram Landline kit
thangram pStN
Code Description
VRLND/1 1 button surface mount with name window landline kit
VRLND/2 2 button surface mount with name window landline kit
Vandal Resistant pStN
Code Description
BLLND/1 1 button surface mount with name window landline kit
BLLND/2 2 button surface mount with name window landline kit
satin black pStN
Code Description
HPLND/1 1 button surface mount with name window landline kit
HPLND/2 2 button surface mount with name window landline kit
highly polished pStN
Code Description
BRLND/1 1 button surface mount with name window landline kit
BRLND/2 2 button surface mount with name window landline kit
classic brass pStN
Pstn Landline kits available in the following kit optionsT
HKL
ND
LILN
D
VRL
ND
/1H
PLN
D/1
BLLN
D/1
BRLN
D/1
BPt
sys
tem
tec
hnol
ogy
Pst
n