+ All Categories
Home > Documents > GUARD RAIL ROLLTOP - NK Fencing Ireland NRAspec_Guard_Rail.pdf · and bottom rails drilled for 15...

GUARD RAIL ROLLTOP - NK Fencing Ireland NRAspec_Guard_Rail.pdf · and bottom rails drilled for 15...

Date post: 20-Dec-2018
Category:
Upload: hatruc
View: 214 times
Download: 0 times
Share this document with a friend
1
GENERAL SPECIFICATIONS HEIGHT: 1m above ground level. WIDTH: 1.8m STANDARD PANEL DETAIL: 50 x 30mm RHS frame, having top and bottom rails drilled for 15 nbr 12mm round bar vertical infill inserts, fully welded at 112mm centres. Adjacent panels are bolted together with 2 nbr M10 x 80mm bolts, nuts and nylon washers. FINISH: Galvanised to BS EN 1461-2009. KEY FEATURES: A National Roads Authority approved railing system, widely in use throughout the Republic of Ireland road network, suitable for roadside pedestrian marshalling. Typical applications include along roadways, road crossings and access points. *All dimensions represent nominal values. GUARD RAIL NRA SPEC GUARD RAIL OTHER PRODUCTS: NK CAM Railings NK Acoustic Barriers NK Crash Barriers NK On Road Guardrail NK Off Road Guardrail NK Standard Guard Rail RELATED PRODUCTS STANDARD COLOUR RANGE The colours shown are indicative colours. No guarantee can be given that the match is correct. BLACK RAL 9005 GREY RAL 7037 BLUE RAL 5010 WHITE RAL 9010 GREEN RAL 6005 RED RAL 3000 YELLOW RAL 1006 BROWN RAL 8019 NK Fencing Ltd (Head office) 40 Trailcock Road Carrickfergus Co. Antrim BT38 7NU t: +44 28 9335 1172 f: +44 28 9336 4336 e: [email protected] w: www.nkfencing.com (Dublin depot) Backweston Leixlip Co. Dublin Ireland t: +353 1 626 9000 f: +353 1 624 5465 e: [email protected] w: www.nkfencing.ie NK Fencing has a policy of continuous innovation and as a result specification may change without notice. Suitability of use and design remain the responsibility of the specifier. Please refer to our terms & conditions of quotation & contract, care and maintenance instructions, and all technical information as provided on our website and available on request.
Transcript

GENERAL SPECIFICATIONS

HEIGHT: 1m above ground level.

WIDTH: 1.8m

STANDARD PANEL DETAIL: 50 x 30mm RHS frame, having top and bottom rails drilled for 15 nbr 12mm round bar vertical infill inserts, fully welded at 112mm centres. Adjacent panels are bolted together with 2 nbr M10 x 80mm bolts, nuts and nylon washers.

FINISH: Galvanised to BS EN 1461-2009.

KEY FEATURES: A National Roads Authority approved railing system, widely in use throughout the Republic of Ireland road network, suitable for roadside pedestrian marshalling. Typical applications include along roadways, road crossings and access points.

*All dimensions represent nominal values.

ROLLTOP

MESH PANEL FENCING SYSTEMS

RO

LLT

OP

ME

SH

PA

NE

L F

EN

CIN

G S

YST

EM

S

GUARD RAIL

NRA

SPE

C G

UA

RD R

AIL

OTHER PRODUCTS:

NK CAM Railings

NK Acoustic Barriers

NK Crash Barriers

NK On Road Guardrail

NK Off Road Guardrail

NK Standard Guard Rail

RELATED PRODUCTS

STANDARD COLOUR RANGE

The colours shown are indicative colours. No guarantee can be given that the match is correct.

BLACKRAL 9005

GREYRAL 7037

BLUERAL 5010

WHITERAL 9010

GREENRAL 6005

REDRAL 3000

YELLOWRAL 1006

BROWNRAL 8019

NK Fencing Ltd(Head office)40 Trailcock RoadCarrickfergusCo. AntrimBT38 7NUt: +44 28 9335 1172f: +44 28 9336 4336e: [email protected]: www.nkfencing.com

(Dublin depot)BackwestonLeixlipCo. DublinIrelandt: +353 1 626 9000f: +353 1 624 5465e: [email protected]: www.nkfencing.ie

NK Fencing has a policy of continuous innovation and as a result specification may change without notice. Suitability of use and design remain the responsibility of the specifier. Please refer to our terms & conditions of quotation & contract, care and maintenance instructions, and all technical information as provided on our website and available on request.

Recommended