MARINE INDUSTRY COATINGSYSTEMS: SELECTING AND
SOURCING
A JPCL eResource
jpclP A I N T S Q U A R E . C O M J O U R N A L O F P R O T E C T I V E C O A T I N G S & L I N I N G S
i
Marine Industry Coating Systems:
Selecting and SourcingA JPCL eBook
Copyright 2013 byTechnology Publishing Company2100 Wharton Street, Suite 310
Pittsburgh, PA 15203
All Rights Reserved
This eBook may not be copied or redistributed without the written permission of the publisher.
Introduction
Potential Risks of Ballast Water Treatment Systems on BallastTank Coatingsby Brian Goldie, JPCL
Coating System Guide for the Marine Industry
Coating Company Profiles
Contents
ii
SPONSORED BY
iv
1
7
14
Contents
iv
Introduction
iStockphoto
This eBook consists of a feature published in the Journal ofProtective Coating & Linings (JPCL) concerning the Marine In-dustry, as well as JPCL Buying Guide material on selectingand specifying coatings for Marine applications in various ex-posure environments. All information is based on the originaldates of publication of the materials in JPCL.
The Buying Guide is organized by exposure type, such as“Exterior Superstructures, Marine, Weathering, & UV,” for steelsubstrate types. Then, coating manufacturers are listed in al-phabetical order, with each company’s preferred systemnamed in both proprietary and generic terms. Finally, contactdetails are given for all the companies.
This collection is designed to provide general guidance onselecting and specifying coatings for the Marine Industry, andthen to give sources for acquiring the appropriate systems.
Introduction
1
Editor’s Note: This article appeared inJPCL in April 2011.
By Brian Goldie,JPCL
Potential Risks of Ballast WaterTreatment Systems on BallastTank Coatings
Ship discharging ballast water.Photo courtesy of OceanSaver
T he global transport of goods by sea is cost-effective.
However, it does bring problems for local marine
life through the accidental transport of one coun-
try’s (or continent’s) indigenous marine species to a country
or continent where that species is not indigenous.
2
The species can come from marine fouling on
a vessel’s hull or, more likely, by discharge of
ballast water, as occurred in the Zebra mussel
infestation of the Great Lakes in North Amer-
ica. Zebra mussels are common in Europe but
are not indigenous to North America. Trans-
ported into the Great Lakes in the late 1980s,
the mussels have since spread to many other
lakes and rivers in the USA and Canada. They
consume large quantities of phytoplankton (and
small zooplankton), effectively starving the na-
tive populations of infested lakes and rivers.
They also interfere with the fish supply for hu-
mans and other animals, clog hydropower plant
intakes, and interfere with other activities and
structures in the lakes and rivers.
IMO has addressed the problem of unwanted
transport of water species. The IMO’s Ballast
Water Management Convention (although not
currently ratified) requires that all vessels be
equipped with a ballast water treatment system
to ensure that any discharged water is free
from marine organisms. However, the adoption
of the treatment system could pose problems
for the coatings applied in these tanks to pro-
tect against corrosion, causing breakdown and
ultimately affecting the structural integrity of
the vessel. The potential impact of water treat-
ment systems on protective coating systems on
ships was the subject of a one-day workshop,
organized by Informa Maritime Events, in Lon-
don (December 6, 2010).
This article reviews the presentations made
at this workshop.
Ballast Water Treatment:Assessing the RisksThe scene was set by Lynda Speed of Safinah Ltd,
who introduced the new IMO regulation and ex-
plained how it was in conflict with the existing
Performance Standard for Protective Coatings
(PSPC) for ballast tanks. Vessels must comply
with the PSPC (IMO Resolution MSC.215), which
requires coatings used in ballast tanks to be ap-
proved and to have a 15-year life expectancy in
good condition. However, the IMO PSPC does not
use treated water to qualify coatings.
Ballast water treatment (BWT) alters the com-
position of the water/environment in the tank.
The effect that the change could have on the
tank coating will depend on the type of treat-
ment system used. Current treatment systems
comprise mechanical methods (filtration, sepa-
ration); physical (de-oxygenation); chemical
(electro-chlorination, chlorine dioxide, ozone);
or combinations of these. Each carries different
risks, but the biggest potential threat to the bal-
last tank coating comes from the use of chemi-
cal methods, which use highly oxidizing species.
These species are known to cause rapid break-
down of epoxy coatings—the major class of
coatings approved for ballast tank use.
There are over 30 such treatment systems on
the market today, the majority of which use ac-
tive substances. As part of the IMO approval
process, the BWT equipment supplier has to
carry out compatibility testing with coatings;
however, what testing has actually been carried
out and its results are not generally made known
to the users (or paint companies). In addition, the
IMO test protocol for water treatment systems
is not linked to the prescribed testing for an ap-
proved ballast tank coating, nor does it address
the potential for surface degradation of the coat-
ing with time, which would be the main failure
mode with oxygenating systems.
Ballast tank with lining in good condition. Photo courtesy of Exova
3
Paint Industry ViewThe coating industry’s perspective was pre-
sented by Evert van Rietsachoten of PPG Ma-
rine Coatings, on behalf of the PSPC working
group of the International Paint & Printing Ink
Council (IPPIC).
The speaker explained that interest in the mar-
ket for Ballast Water Treatment (BWT) systems
was increasing, and coating suppliers were re-
ceiving questions about the systems from own-
ers, shipyards, and BWT-system suppliers on a
regular basis. In many cases, coating suppliers
were being asked to “approve” compatibility of
their coatings with certain BWT systems. How-
ever, at this stage, all manufacturers can do is ad-
vise—approval of BWT systems is in the hands
of the Administration (Flag State, although nor-
mally delegated to the classification societies) in
line with the IMO regulations.
The testing procedure is outlined in IMO’s
Guidelines for Approval of Ballast Water Man-
agement Systems [G8 IMO resolution
MEPC.125(53)]. To get approval, the equipment
supplier must go through a multi-step test pro-
cedure involving GESAMP and BWWG ap-
proval of the environmental impact of the dis-
charged water, the Flag State’s approval of the
system after land-based and sea-based trials,
and, finally, the Flag State’s issuance of a Type
Approval Certificate (although the Flag State
will normally use a classification society to ver-
ify and assure the quality of the test and data,
and to issue the certificate).
Paint companies can only advise on compati-
bility at this stage because BWT is still an evolv-
ing technology, and there is limited in-service
experience with the systems. To understand the
operation of these systems, and the exact con-
ditions generated, requires specialist knowl-
edge, which the paint manufacturers do not
have. The speaker emphasized that the systems
that work by chemical treatment are of most
concern to the paint industry.
The BWT test requirements are set by IMO
MEPC (based on advice of the Group of Experts
on the Scientific Aspects of Marine Environ-
mental Protection, GESAMP). The approval
process and responsibilities are clearly de-
scribed. However, the current test protocol and
review process could be improved. Improving
Ballast tank in poor condition.
4
the process is the responsibility of
GESAMP/IMO MEPC, the recognized body to
approve test methods, evaluate results, and ap-
prove systems.
From an IPPIC point of view, the main con-
cerns are that several systems rely on active
substances that could potentially have an ad-
verse effect on the ballast tank protective coat-
ing. The test method for BWT in combination
with coatings is not standardized, and the cur-
rent test protocol does not address any coating
surface degradation with time. In addition, the
testing is not always carried out by an inde-
pendent third party, and the results are not
widely available. Finally, correlation of tests
with performance at sea has not been validated.
IPPIC, which has IMO NGO status, can help
by being the point of contact between suppliers
and GESAMP Ballast Water Working Group
(BWWG). It can advise on coating testing and
can also analyze and comment on test results,
according to the speaker.
View from Classification Society The Regulatory status and Classification Soci-
ety position was highlighted by Helge Vold,
Principal Engineer within the Materials Tech-
nology group of DNV. Vold started by review-
ing the IMO PSPC requirements for ballast tank
coatings and the testing required for the PSPC.
The speaker suggested that there should be a
GESAMP water ballast tank corrosion test for
uncoated substrates and substrates coated with
epoxies that had already passed the IMO PSPC
test. The substrates should be subjected to a
water immersion test (e.g., ISO 2812-2, Paint
and varnishes—Determination of resistance to
liquids—Part 2: Water immersion method),
with the test using, at a minimum, untreated
and treated effluents under continuous expo-
sure. The evaluation of the uncoated substrates
should include an estimate of the corrosion
rates and the depth and density of localized cor-
rosion, according to Vold. The coated samples
should be evaluated for adhesion (Pull-Off Test,
ISO 4624); degree of blistering, rusting, crack-
ing, and flaking (ISO 4628 series); and delami-
nation at the scribe (ISO 4628-8). The speaker
also suggested detailed test procedures and ac-
ceptance criteria for testing compatibility of
BWM systems and PSPC-qualified epoxies.
Vold noted that ballast water treatment sys-
tems are also required for existing ships, which
may not have modern hard (epoxy) coatings for
corrosion protection. The proposed treatment
systems should only be acceptable for use with
soft or semi-hard coatings when the results of
testing bare steel were acceptable, and epoxy
(or other hard coatings) not tested according to
PSPC or previous similar test methods should
be individually tested.
The Insurer’s PerspectiveBruno Saverys, of Groupama Transport Insur-
ance, raised several interesting points. Insurers
are currently covering 5-year guarantees on
standard ballast tank coatings, which can be in-
creased to 5+5+5 years, subject to intermedi-
ate 5-year condition surveys. The insurers are
aware of the concerns about the (unknown) im-
pact of ballast water treatment systems on stan-
dard coatings and about the testing of coatings
Example of typical BWT equipment.Photo courtesy of OceanSaver
5
in contact with these systems. And insurers,
the speaker said, are questioning whether they
have to change their insurance terms to reflect
a change in risk.
If the insurers have proof that ballast water
treatment is not affecting the properties of bal-
last tank coating systems, then there will be no
influence on policy conditions, guarantee dura-
tion, or insurance premium/rating. However,
as long as there is no proof, insurers will have to
ask for additional testing, or for more thorough
inspection requirements, and could adapt their
conditions to reflect a possible negative impact.
TestingLeif Erik Caspersen, of BWT supplier
OceanSaver AS, raised the question of what
testing has been done to date. He began by stat-
ing that a “tidal wave” of technologies entering
the approval process all use electrolysis at high
chlorine levels. He gave examples from 7 sup-
pliers’ technologies in which the minimum
dosage level was 10 mg Cl2/litre. Another 7
technologies combine this type of treatment
with another technology in order to reduce the
chlorination levels required. Of 25 technologies
now proposed for BWM approval, more than
half use oxidizing agents, such as chlorine, at
very high levels. Caspersen emphasized that
not only are chlorine systems an area of con-
cern but also the use of ozone is a concern be-
cause although it has a rapid reaction, it
generates chlorine and bromine reaction prod-
ucts, which are both powerful oxidants.
It should be noted that when a system is eval-
uated for final approval by the GESAMP group,
they also evaluate corrosion issues and make
comments. These comments are never reflected
in the Type Approval Certificate for BWT sys-
tems. For example, a typical comment from the
GESAMP group could be something to the ef-
fect that the group considered that the actual
exposure time for the treatment dose was in-
sufficient for long-term corrosion rates and that
the data are insufficient to characterize long-
term corrosion rates of steel subjected to the
treatment system accurately.
Caspersen stated that to his knowledge, only
a few suppliers of BWT systems have carried
out serious testing regarding corrosion effects
Wave test tank. Photo courtesy of Exova
6
of their systems, and only 2 vendors he knows
can provide any form of serious documentation
regarding their systems’ effect on ballast tank
coatings. In fact, some vendors have presented
tests carried out by themselves that are in con-
flict with accepted knowledge regarding corro-
sion effects.
Caspersen then highlighted testing that two
independent laboratories carried out on his
company’s BWT system (cavitation with N2 su-
persaturation). Testing consisted of a 6-month
wave tank program, and 12 and 15 months’
corrosion testing onboard ships.
Steel test plates with a total of 8 different
epoxy coatings, supplied by the major marine
paint manufacturers, were subjected to the
Water Ballast Tank/Wave Tank test (formerly
known as the Marintek test) for 6 months to
simulate ballast tank conditions. Some of the
panels were scribed and others had anodes at-
tached. The conclusion reached was that the
proprietary treatment had no detrimental effect
on the coatings or their corrosion protection
properties. However, it was recognized that, in
terms of corrosion, the six-month test period
was too short to find any significant differences
between the tank containing treated water and
the tank with untreated water. The same coat-
ing systems were also tested for 15 months on-
board a bulk carrier. Test panels were placed in
different areas in two ballast tanks, one of which
had the treatment system installed. A similar
test was also carried out on a car carrier for 12
months. Therefore, the speaker concluded that
it is easy to set up realistic testing, which should
be for a minimum of 12 months.
A Proposal for Testing ProtocolBecause of the question of reliability, or uncer-
tainty of testing already carried out, and the in-
dustry’s lack of knowledge of the BWT systems,
John Carter, of the independent testing com-
pany Exova, described a proposal for a new test
program to confirm the compatibility of BWT
and ballast tank coatings.
He started with the testing required for ballast
tank coatings under the PSPC Resolution
(MSC.215) and also explained “crossover testing.”
Shipbuilders reserve the right to use differ-
ent manufacturers’ primers with approved top-
coats, and to check compatibility between
approved products from different suppliers, a
crossover test can be performed by a third
party; it is not necessary to carry out the full
PSPC evaluation.
For BWT system compatibility, rather than
reinvent the wheel, he proposed to use the ex-
isting PSPC test method modified for this re-
quirement and using it as a crossover test. A
detailed protocol was then described.
This testing would not conflict with the orig-
inal approvals for the coatings systems. It is not
mandatory, only a possible solution to the prob-
lems raised at this workshop.
Closing ThoughtsThe last presentation was by Giles Candy (NEI
Treatment Systems), who reviewed the impact
of the PSPC on Ballast Water Management.
BWT systems are now being required, and in
the next 10 years or so, the entire fleet will be
using such systems. It is clear that a BWT sys-
tem can affect a coating. He noted, however,
that the Ballast Water Convention addresses
this problem by stating that a BWT system
should not impair the health or safety of a ship.
The Convention also provides recommenda-
tions for corrosion testing, which has been com-
pleted to differing degrees by the suppliers of
the approved and certified systems. So far, the
procedures for testing a coating have not for-
mally addressed the type of BWT system the
coating will have to work with. The coating
manufacturers, BWT system manufacturers,
and the regulatory bodies need to work to-
gether to overcome this, Candy concluded.
Brian Goldie is the technical editor of JPCL.
7
ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane
Alwan Paints and CoatingsAlwanEpoxy (1-2 Coats)/Urethane
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy Flake Filled/Epoxy Flake Filled
Carboline CompanyCarboguardOrganic Zinc/Epoxy/Urethane
Cloverdale Paint Inc.ArmourshieldEpoxy (1-2 Coats)/Urethane
Concrete Solutions Products by Rhino LiningsConcrete Solutions HP UrethaneUrethane/Urethane
Corporacion Mara SASigma CoatingsInorganic Zinc/Epoxy/Urethane
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
CorrosealCorroseal Rust Converter PrimerOther
Cote-L Industries Inc.Durabak 18 M-26/Durabak 18Urethane/Urethane
Crossfield Products Corp.Dex-O-TexEpoxy (1-2 Coats)/Urethane
CSL Silicones Inc.Si-Coat 580Siloxane/Siloxane
Dampney Co., Inc.EpodurOther
Diamond Vogel Paint CompanyEndura-Zinc 768/Mult-E-Prime 500/Multi-ThaneOrganic Zinc/Epoxy/Urethane
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
FSC Coatings Inc.Rustop/Bio-Safe MaxLifeAlkyd/Acrylic/Acrylic
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy (1-2 Coats)/Urethane
Hempel (USA) Inc.17630-3/17630-3/5595UEpoxy (1-2 Coats)/Urethane
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Hydrex Underwater TechnologyEcospeedVinyl Ester (3 Coats)
Induron Coatings, Inc.Perma-GlossOrganic Zinc/Epoxy/Fluorourethane
Industrial Coatings & SealantsPolycoatPolyurea Hybrid (1, 2, or 3 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
ITW Polymers Coatings North AmericaAS-550Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane
HEMPELCoatingswww.hempel.uswww.hempel.com
Listings are alphabetized by company name.
Exterior Superstructures Marine,Weathering, & UVSteel
SPONSORED BY
Listings are alphabetized by company name.
Coating System Guide for the Marine Industry
iStockphoto
KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane
Madison Chemical IndustriesMariThane Liquid Zinc/MariThane 1:4 AliphaticMCU Zinc Rich/Urethane/Urethane
MascoatMM-DTMAlkyd/Acrylic/Acrylic
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAT240/AT450HEpoxy (1-2 Coats)/Urethane
Precision Coatings Inc.PC5Siloxane/Siloxane
Premier Coating Systems Inc.PCS-#1111/PCS-#4300Epoxy (1-2 Coats)/Fluoropolymer
Randolph ProductsRandogrip Navy GOther
Rhino Linings CorporationRhino Linings SolarMaxPolyurea Pure (1, 2, or 3 Coats)
Riley Paint CompanyRiley PaintEpoxy (1-2 Coats)/Urethane
Rodda Paint Co./Cloverdale PaintClovaMastic/ArmourshieldEpoxy (1-2 Coats)/Urethane
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsSeaguard 5000HS/Acrolon 218Epoxy (1-2 Coats)/Urethane
Simpson Strong-TieSS-T FX-498 Epoxy Epoxy 100% Solids (1 or 2 Coats)
SpecguardSG-E375-08Polyurea Pure (1, 2, or 3 Coats)
Specialty Products, Inc. (SPI)Ultra Bond-100, AMP 100, CAP 100Polyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane
ThermionThermionThermal Spray
3M Electrical Markets DivisionScotchkoteFusion-Bonded Epoxy (1-2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCMasticGrip/UreGripEpoxy (1-2 Coats)/Urethane
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Watson Coatings, Inc.Aqua-ShieldAlkyd/Acrylic/Acrylic
Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane
Williams-Hayward Protective CoatingsPower Grip, AcrathaneEpoxy (1-2 Coats)/Urethane
ZRC WorldwideZRC-221 Cold Galvanizing CompoundZinc-Rich, Organic
Exterior Deck Plate Abrasion, Marine, Weathering, & UVSteel
ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane
Alwan Paints and CoatingsAlwanAlkyd/Alkyd/Silicone Alkyd
Arma CoatingsArma 901 & PolyasparticPolyurea Pure (1, 2, or 3 Coats)
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy/Epoxy Flake Filled (2 Coats)
Carboline CompanyCarbothaneOrganic Zinc/Epoxy/Urethane
CIM IndustriesCIMUrethane Elastomeric (1 Coat)
Cloverdale Paint Inc.ClovaGuard/ArmoursieldEpoxy (1-2 Coats)/Urethane
Concrete Solutions Products by Rhino LiningsConcrete Solutions HP UrethaneUrethane/Urethane
Corporacion Mara SASigma CoatingsEpoxy (1-2 Coats)/Urethane
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
CorrosealCorroseal Rust Converter PrimerOther
Cote-L Industries Inc.Durabak18 M-28/Durabak18M-26 SmoothUrethane/Urethane
Crossfield Products Corp.Dex-O-TexEpoxy (1-2 Coats)/Urethane
Denso North AmericaDensoPolyester/Polyester/Polyester
Diamond Vogel Paint CompanyMult-E-Poxy 180/Multi-Thane 330Epoxy (1-2 Coats)/Urethane
Duromar, Inc.HPL-2221-UV/HPL-2221-UVEpoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Euclid Chemical CompanyFlexolith 2000GEpoxy/Epoxy/Epoxy
FSC Coatings Inc.Rustop 6000 SystemUrethane/Urethane
Gemite Products Inc.Fibre-PrimeOther
Global EcoTechnologiesEndura-TufUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
Hempel (USA) Inc.17630-3/17630-3/5595UEpoxy (1-2 Coats)/Urethane
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Perma-Tuff SLEpoxy 100% Solids (1 or 2 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
SPONSORED BYMarine Industry 8
ITW Polymers Coatings North AmericaAS-550Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Barrier/Jotamastic/HardtopOrganic Zinc/Epoxy/Urethane
KCC Corrosion Control Co., Ltd.Techni-Plus UR-5Urethane/Urethane
Key Resin CompanyPlasti-ChemieMethyl Methacrylate (2 Coats)
Madison Chemical IndustriesMariThane Liquid Zinc/MariThane 1:4 AliphaticMCU Zinc Rich/Urethane/Urethane
NIC IndustriesPrismaticPolyester/Polyester/Polyester
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 7502Polyurea Pure (1, 2, or 3 Coats)
Polyval CoatingsPolyurUrethane/Urethane
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAT235/AT237MEpoxy/Epoxy 100% Solids
Randolph ProductsRandogrip Navy GOther
Rhino Linings CorporationRhino Linings SolarMaxPolyurea Pure (1, 2, or 3 Coats)
Riley Paint CompanyRiley PaintEpoxy (1-2 Coats)/Urethane
Rodda Paint Co./Cloverdale PaintClovaMastic/ArmourshieldEpoxy (1-2 Coats)/Urethane
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Rust Bullet, LLCRust Bullet Clear ShotOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seal For Life Industries Stopaq WrappingbandTape Wraps
Sherwin-WilliamsSeaguard 5000HS/Acrolon 218Epoxy (1-2 Coats)/Urethane
Simpson Strong-TieSS-T FX-70-9 EpoxyEpoxy 100% Solids (1 or 2 Coats)
SpecguardSG-E375-08Polyurea Pure (1, 2, or 3 Coats)
Specialty Products, Inc. (SPI)Ultra Bond-100, AMP 100, CAP 100Polyurea Pure (1, 2, or 3 Coats)
SpeedCove Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Urethane
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Gard 251/257/258Epoxy/Epoxy 100% Solids
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Urethane
Interior MildSteel
ABRI IndustriesIronBond 111Organic Zinc/Epoxy/Urethane
Alwan Paints and CoatingsAlwanOrganic Zinc/Siloxane
Arma CoatingsArma 90150DSPolyurea Pure (1, 2, or 3 Coats)
Burke Industrial CoatingsBurke Liquid Stainless SteelEpoxy Flake Filled/Epoxy Flake Filled
Carboline CompanyCarboguardEpoxy (1-2 Coats)/Urethane
Cloverdale Paint Inc.ClovaGuardEpoxy/Epoxy/Epoxy
Concrete Solutions Products by Rhino LiningsConcrete Solutions HP UrethaneUrethane/Urethane
Corporacion Mara SASigma CoatingsEpoxy/Epoxy/Epoxy
Corrocoat USA Inc.Plasmet ZFEpoxy (1-2 Coats)/Acrylic (1-2 Coats)
CorrosealCorroseal Rust Converter PrimerOther
Cote-L Industries Inc.Durabak M-26/Durabak M-26 SmoothUrethane/Urethane
Crossfield Products Corp.Dex-O-TexEpoxy/Epoxy/Epoxy
Dampney Co., Inc.ThurmaloxOther
Denso North AmericaDensoPolyester/Polyester/Polyester
Diamond Vogel Paint CompanyIron Prime 600/Finium DTM-ATAlkyd/Acrylic/Acrylic
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationEneseal CROther
Eoncoat LLCEoncoat 0 VOCOther
FSC Coatings Inc.Rustop/Bio-Safe MaxLifeAlkyd/Acrylic/Acrylic
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Gulf Coast Paint Mfg., Inc.GCPEpoxy/Epoxy/Epoxy
Hempel (USA) Inc.12050/12050/52140Alkyd/Alkyd/Alkyd
Heresite Protective Coatings, LLCVR-500Other
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Perma-Clean IIEpoxy/Epoxy/Epoxy
HEMPELCoatingswww.hempel.uswww.hempel.com
SPONSORED BYMarine Industry 9
SPONSORED BYMarine Industry
Industrial Coatings & SealantsPolycoatPolyurea Hybrid (1, 2, or 3 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
ITW Polymers Coatings North AmericaAS-175Epoxy/Epoxy/Epoxy
Jotun Paints Inc.Pilot QD Primer/Pilot II/Pilot IIAlkyd/Alkyd/Alkyd
KCC Corrosion Control Co., Ltd.Techni-Plus EP14Epoxy Flake Filled/Epoxy Flake Filled
Key Resin CompanyKey Lastic MEEpoxy/Epoxy 100% Solids
MascoatMM-DTMAlkyd/Acrylic/Acrylic
NIC IndustriesPrismaticEpoxy/Polyester/Polyester
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polyval CoatingsPolyflexPolyurea Hybrid (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAT185H/AT5450Alkyd/Alkyd/Alkyd
Precision Coatings Inc.PC6Urethane/Urethane
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Riley Paint CompanyRiley PaintAlkyd/Alkyd/Alkyd
Rodda Paint Co./Cloverdale PaintMaine Enamel 74903Alkyd/Alkyd/Alkyd
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsSeaguard 1000 EnamelAlkyd/Alkyd/Alkyd
SpecguardSG-E375-08Polyurea Pure (1, 2, or 3 Coats)
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield HT-100F UB, AMP 100Polyurea Pure (1, 2, or 3 Coats)
SpeedCove Inc. DBA Solid Rock EnterprisesSpeedCove Precast Cove Base SystemsOther
Termarust TechnologiesTermarust TR2100 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
U.S. Coatings, LLCMultiGripAlkyd/Alkyd/Alkyd
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Watson Coatings, Inc.Aqua-ShieldEpoxy (1-2 Coats)/Acrylic (1-2 Coats)
Wilko Paint, Inc.WilkoOrganic Zinc/Epoxy/Epoxy
Williams-Hayward Protective CoatingsNovoc,ThermalbondOther
ZRC WorldwideZRC-221 Cold Galvanizing CompoundZinc-Rich, Organic
Below Water LineSteel
ABRI IndustriesIronBond 111 w/TC421Organic Zinc/Epoxy 100% Solids
Alwan Paints and CoatingsAlwanPhenolic/Fusion-Bonded Epoxy
BASF Corporation–Construction SystemsA-P-EEpoxy/Epoxy 100% Solids
Carboline CompanyBitumasticEpoxy Coal Tar/Epoxy Coal Tar
SpeedCove3 wrule:Layout 1 10/9/09 3:21 P
ChemCo SystemsCCS Marine CoatingEpoxy/Epoxy 100% Solids
Corporacion Mara SASigma CoatingsEpoxy Coal Tar/Epoxy Coal Tar
Corrocoat USA Inc.Polyglass ZipcoatPolyester/Polyester/Polyester
Denso North AmericaSeaShield/DensoOther
Diamond Vogel Paint CompanyMult-E-Poxy 180Epoxy/Epoxy/Epoxy
Duromar, Inc.HPL-2510/HPL-2510-FREpoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Gemite Products Inc.Fibre-PrimeOther
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy 100% Solids
Hempel (USA) Inc.17630-3/17630-3/45182/76600/76600Other
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Hydrex Underwater TechnologyEcospeedVinyl Ester (3 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
Jotun Paints Inc.Jotamastic 90 AI/Jotamastic 90 AI-RTEpoxy/Epoxy Flake Filled (2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
NIC IndustriesPrismaticEpoxy/Polyester/Polyester
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
10
SPONSORED BYMarine Industry
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAmercoatEpoxy/Epoxy/Epoxy
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovaMasticEpoxy/Epoxy/Epoxy
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologySea-SpeedSiloxane/Siloxane
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsFast Clad EREpoxy 100% Solids (1 or 2 Coats)
Simpson Strong-TieSS-T FX-70-9 Epoxy Epoxy 100% Solids (1 or 2 Coats)
SpecguardSG-E375-08Polyurea Pure (1, 2, or 3 Coats)
Specialty Products, Inc. (SPI)Polyshield HT, Polyshield Hi-E, HT-100F UPolyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Gard, Bio-DurEpoxy/Epoxy 100% Solids
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCMasticGripEpoxy Coal Tar High Build (1 or 2 Coats)
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU Coal Tar/MCU Coal Tar/MCU Coal Tar
Wilko Paint, Inc.WilkoEpoxy Coal Tar High Build (1 or 2 Coats)
Ballast Tank LiningsSteel
ABRI IndustriesIronBond 111 w/TC421Inorganic Zinc/Epoxy 100% Solids
Alwan Paints and CoatingsAlwanCoal Tar/Asphalt
ARC Composites, Div. of A.W. ChestertonARC S1/S1HBEpoxy 100% Solids (1 or 2 Coats)
Arma CoatingsArma 901 55Polyurea Pure (1, 2, or 3 Coats)
Carboline CompanyCarboguardEpoxy/Epoxy/Epoxy
Corporacion Mara SASigma CoatingsEpoxy/Epoxy Phenolic/Epoxy Phenolic
Corrocoat USA Inc.Polyglass VEFVinyl Ester (3 Coats)
Cote-L Industries Inc.Durabak M-26 SmoothUrethane/Urethane
Daubert Chemical, Co.TectylCalcium Sulphonate
Denso North AmericaDensoOther
Duromar, Inc.HPL-2510/ HPL-2510Epoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy Flake Filled (2 Coats)
Hempel (USA) Inc.17630-3/17630-3/17630-3Epoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCCSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.PermaSafe 100 Ceramic EpoxyEpoxy/Epoxy 100% Solids
Jotun Paints Inc.Balloxy HB LightEpoxy/Epoxy/Epoxy
KCC Corrosion Control Co., Ltd.Techni-Plus VE 62Vinyl Ester (3 Coats)
Madison Chemical IndustriesMariThane II PW UltraPolyurea Hybrid (1, 2, or 3 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy Epoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy/Epoxy 100% Solids
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 1050HUrethane Elastomeric (1 Coat)
Polyval CoatingsPolyflexPolyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAT240/AT240Epoxy/Epoxy/Epoxy
Premier Coating Systems Inc.PCS-#1100Other
Raven Lining SystemsRaven Lining SystemsEpoxy 100% Solids (1 or 2 Coats)
Rhino Linings CorporationRhino ExtremePolyurea Pure (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovalineEpoxy Novolac (1 or 2 Coats)
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seal For Life IndustriesStopaq WrappingbandThermal Spray
Sherwin-WilliamsFast Clad EREpoxy 100% Solids (1 or 2 Coats)
11
SPONSORED BYMarine Industry
Specialty Products, Inc. (SPI)Polyshield HT, Polyshield Hi-E, Polyshield HT-100F UPolyurea Pure (1, 2, or 3 Coats)
Stirling Lloyd Group Plc.PermareOther
Stirling Lloyd Products Inc.PermareOther
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermarust TR2000 HR CSA SeriesCalcium Sulphonate
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
Thin Film Technology, Inc.Bio-Gard, Bio-DurEpoxy 100% Solids (1 or 2 Coats)
3M Electrical Markets DivisionScotchkoteFusion-Bonded Epoxy (1-2 Coats)
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Wilko Paint, Inc.WilkoEpoxy Coal Tar/Epoxy Coal Tar
Cargo Tank LiningsSteel
ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane
Alwan Paints and CoatingsAlwanCoal Tar/Asphalt
Amercoat Canada/Nukote CanadaNukotePolyurea Hybrid (1, 2, or 3 Coats)
ARC Composites, Div. of A.W. ChestertonARC S4+/982Epoxy Novolac (1 or 2 Coats)
Arma CoatingsArma 901 55Polyurea Pure (1, 2, or 3 Coats)
Carboline CompanyCarboguardEpoxy 100% Solids (1 or 2 Coats)
Cloverdale Paint Inc.ClovaLineEpoxy 100% Solids (1 or 2 Coats)
Corporacion Mara SASigma CoatingsEpoxy/Epoxy Novolac (2 Coats)
Corrocoat USA Inc.CorroglassVinyl Ester (3 Coats)
Cote-L Industries Inc.Durabak M-26 SmoothUrethane/Urethane
Denso North AmericaDensoOther
Duromar, Inc.HPL-2510/HPL-2510Epoxy (1-2 Coats)/Urethane
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Fabick Protective CoatingsFabickPolyurea Pure (1, 2, or 3 Coats)
Gemite Products Inc.Gem-Cote EP CREpoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy Flake Filled (2 Coats)
Hempel (USA) Inc.15500/15500/15500Epoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCCSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Perma-Clean 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
Jotun Paints Inc.TankguardEpoxy/Epoxy Phenolic (2 Coats)
KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy Flake Filled (2 Coats)
Madison Chemical IndustriesMariThane II MultiPolyurea Hybrid (1, 2, or 3 Coats)
NSP Specialty ProductsNSP-120 High Performance Epoxy Epoxy 100% Solids (1 or 2 Coats)
HEMPELCoatingswww.hempel.uswww.hempel.com
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 1050HUrethane Elastomeric (1 Coat)
Polycorp Ltd.Polycorp/PolymericSheet Lining, Rubber
Polyval CoatingsPolyflexPolyurea Pure (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAT253/AT253Epoxy Novolac (1 or 2 Coats)
Rhino Linings CorporationRhino Linings TuffGripPolyurea Pure (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovaLineEpoxy Novolac (1 or 2 Coats)
Roval USA Corp.Roval R22 Cold Galvanizing CompoundZinc-Rich, Organic
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologyNova-Sil CHOrganic Zinc/Epoxy/Siloxane
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsPhenicon HSEpoxy Phenolic (3 Coats)
Specialty Products, Inc. (SPI)Ultra Bond-100, Polyshield Hi-E, HT-100FPolyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
TMS Metalizing Systems, Ltd.TMS Metalizing SystemsThermal Spray
12
SPONSORED BYMarine Industry
U.S. Coatings, LLCGripLineEpoxy/Epoxy 100% Solids
VersaFlex IncorporatedFSS 50 DMPolyurea Pure (1, 2, or 3 Coats)
Wasser CorporationWasserMCU/MCU/MCU
Wilko Paint, Inc.WilkoPolyester/Polyester/Polyester
Cargo Hold LiningsSteel
ABRI IndustriesIronBond 111Inorganic Zinc/Epoxy/Urethane
Alwan Paints and CoatingsAlwanCoal Tar/Asphalt
Amercoat Canada/Nukote CanadaNukotePolyurea Hybrid (1, 2, or 3 Coats)
ARC Composites, Div. of A.W. ChestertonARC S7Vinyl Ester (3 Coats)
Arma CoatingsArma 901 90ASPolyurea Pure (1, 2, or 3 Coats)
Carboline CompanyCarboguardEpoxy/Epoxy/Epoxy
Cloverdale Paint Inc.ClovaLineEpoxy Novolac (1 or 2 Coats)
Corporacion Mara SASigma CoatingsEpoxy/Epoxy Novolac (2 Coats)
Corrocoat USA Inc.CorroglassVinyl Ester (3 Coats)
CorrosealCorroseal Rust Converter PrimerPhenolic/Fusion-Bonded Epoxy
Cote-L Industries Inc.Durabak M-26 SmoothUrethane/Urethane
Denso North AmericaDensoOther
Diamond Vogel Paint CompanyMult-E-Prime 500/Mult-E-Poxy 180Epoxy/Epoxy/Epoxy
Duromar, Inc.HPL-1110/HPL-1110Epoxy 100% Solids (1 or 2 Coats)
ENECON CorporationChemcladEpoxy 100% Solids (1 or 2 Coats)
Eoncoat LLCEoncoat 0 VOCOther
Fabick Protective CoatingsFabickPolyurea Pure (1, 2, or 3 Coats)
Gemite Products Inc.Gem-Cote EP 100Epoxy 100% Solids (1 or 2 Coats)
Global EcoTechnologiesEndura-FlexUrethane Elastomeric (1 Coat)
Gulf Coast Paint Mfg., Inc.Poly ChemEpoxy/Epoxy Flake Filled (2 Coats)
Hempel (USA) Inc.45751-3/45751-3/45751-3Epoxy/Epoxy/Epoxy
Heresite Protective Coatings, LLCCSE-6200Epoxy/Epoxy/Epoxy
HJ3 Composite TechnologiesHJ3 CarbonSeal Industrial SystemsEpoxy/Epoxy Novolac (2 Coats)
Induron Coatings, Inc.Perma-Clean 100 Ceramic EpoxyEpoxy 100% Solids (1 or 2 Coats)
Industrial Nanotech Inc.Nansulate PTThermal Spray
Jotun Paints Inc.JotamasticEpoxy/Epoxy/Epoxy
KCC Corrosion Control Co., Ltd.Techni-Plus AEP 20.2Epoxy/Epoxy Flake Filled (2 Coats)
Madison Chemical IndustriesMariThane II MultiPolyurea Hybrid (1, 2, or 3 Coats)
MascoatMM-DTMAlkyd/Acrylic/Acrylic
Northern Industries Inc.NI-56Urethane/Urethane
NSP Specialty ProductsNSP-120 High Performance Epoxy CoatingEpoxy 100% Solids (1 or 2 Coats)
Peerless Industrial SystemsEpigenEpoxy 100% Solids (1 or 2 Coats)
Polibrid Coatings, Inc.Polibrid 705Urethane Elastomeric (1 Coat)
Polycoat ProductsPolyeuro 1050HUrethane Elastomeric (1 Coat)
Polycorp Ltd.Polycorp/PolymericSheet Lining, Rubber
Polyval CoatingsPolyflexPolyurea Hybrid (1, 2, or 3 Coats)
PPC Coatings (MTR)PPC CoatingsOther
PPG Protective & Marine CoatingsAT238/AT238Epoxy/Epoxy/Siloxane
Rhino Linings CorporationRhino Linings TuffGripPolyurea Pure (1, 2, or 3 Coats)
Rodda Paint Co./Cloverdale PaintClovaLineEpoxy Novolac (1 or 2 Coats)
Rust Bullet, LLCRust Bullet StandardOther
Sauereisen, Inc.SauereisenUrethane/Urethane
Seacoat TechnologyNova-SilEpoxy/Epoxy/Siloxane
Seal For Life IndustriesStopaq WrappingbandTape Wraps
Sherwin-WilliamsEuroNavy ES301Epoxy/Epoxy 100% Solids
Specialty Products, Inc. (SPI)HCR-FR, Ultra Bond-100, AMP 100Polyurea Pure (1, 2, or 3 Coats)
Subsea Industries NVEcospeedVinyl Ester (3 Coats)
Termarust TechnologiesTermazinc TZ1000 SeriesZinc-Rich, Organic
Tesla NanoCoatings, Inc.TeslanOrganic Zinc/Epoxy/Epoxy
ThermionThermionThermal Spray
U.S. Coatings, LLCEpoxyGripEpoxy/Epoxy/Epoxy
Wasser CorporationWasserMCU/MCU/MCU
Wilko Paint, Inc.WilkoEpoxy (1-2 Coats)/Urethane
ZRC WorldwideZRC Zero-VOC Galvanizing CompoundZinc-Rich, Inorganic
13
Advanced Science CoatingsPO Box 748Sunset Beach, CA 90742 Phone: 209-481-2042Contact: Tom [email protected]
AFM3251 Third Ave.San Diego, CA 92103 Phone: 619-239-0321Contact: Jay [email protected]
Albi Mfg. A Division of StanChem Inc.401 Berlin St.East Berlin, CT 06023 Phone: 860-828-0571Contact:W. Casey [email protected]
Aldo Products Company, Inc.1604 N. Main St.Kannapolis, NC 28081 Phone: 800-474-6019Contact: Robert [email protected]
Alistagen CorporationTen Park Ave.New York, NY 10016 Phone: 212-317-0100Contact: Alis [email protected]
Alwan Paints and CoatingsAmeer Khusro Rd., KarsazKarachi, 75350 PakistanPhone: 92-321-8950091Contact: Raza [email protected]
Amercoat Canada/Nukote Canada1174 South Service Rd. W.Oakville, ON L6L 5T7 CanadaPhone: 905-847-1500Contact: Daniel [email protected]
American Industrial1218 W. 41st St., Ste. BTulsa, OK 74107 Phone: 918-445-0627Contact: Fred [email protected]
AmTech Tank Lining & Tank Repair75-4 Main St., Ste. 300Plymouth, NH 03264 Phone: 888-839-0373Contact: Dennis [email protected]
Andek Corporation850 Glen Ave., PO Box 392Moorestown, NJ 08057Phone: 800-800-2844Contact: Neil [email protected]
ARC CompositesDiv. of A.W. Chesterton860 Salem St., Bldg. AGroveland, MA 01834 Phone: 978-469-6666Contact: Kathy [email protected]
Aremco ProductsPO Box 517Valley Cottage, NY 10989 Phone: 845-268-0039Contact: Peter [email protected]
Arizona Polymer Flooring Inc.7731 N. 68th Ave.Glendale, AZ 85303 Phone: 888-855-3455Contact: Daniel [email protected] our display ad, p. 71.
Arkema Inc.900 First Ave., Bldg. #10King of Prussia, PA 19406 Phone: 610-205-7898Contact: Vince [email protected]
Arma Coatings5555 W. 11th Ave.Eugene, OR 97402 Phone: 800-524-2762Contact: Charles [email protected]
Armor Shield1343 Union Ave., NEGrand Rapids, MI 49505 Phone: 616-245-0757Contact: Patrick [email protected]
Associated Paint10160 NW South River Dr.Miami, FL 33178 Phone: 305-885-1964Contact: Lee [email protected]
ASTC Polymers Inc.3207 West Warner Ave.Santa Ana, CA 92704 Phone: 714-966-2893Contact: Dick [email protected]
Atlas Minerals & Chemicals, Inc.1227 Valley Rd., PO Box 38Mertztown, PA 19539 Phone: 610-682-7171Contact: Scott [email protected]
Avid Protective Products Ltd.2085 Laurelwood Dr.Oakville, ON L6H 4S8 CanadaPhone: 905-339-8386Contact: David [email protected]
Coating Company Profiles
Aashish Coating Tech Pvt. Ltd.140 Laxmi PlazaNew Link Rd., Andheri W.Mumbai, 400053 IndiaPhone: 91 22 [email protected]
ABRI Industries8055 West Manchester Ave.Ste. 735Playa Del Rey, CA 90293 Phone: 310-341-3600Contact: Lee [email protected]
AcryliCon Flooring Solutions12460 Crabapple Rd., Ste. 202-106Alpharetta, GA 30004 Phone: 888-736-7550Contact: Jason [email protected]
Acrylux Paint Co.6010 Powerline Rd.Ft. Lauderdale, FL 33309 Phone: 954-772-0300Contact: Andrew [email protected]
Acrymax Technologies, Inc.221 Brooke St.Media, PA 19063 Phone: 800-553-0523Contact: Eric [email protected]
Acry-Tech Coatings Inc.3601 NE 5th Ave.Ft. Lauderdale, FL 33334 Phone: 954-565-6001Contact:Miki [email protected]
Advanced Chemical Technologies, Inc.9608 North Robinson Ave.Oklahoma City, OK 73114 Phone: 800-535-0433Contact: Kevin [email protected]
iStockphoto.com/mikeuk
Coating Company Profiles
Ceram-Kote Coatings Inc.1800 Industrial Dr.Big Spring, TX 79720 Phone: 432-263-8497Contact: Kevin [email protected]
ChemCo Systems2800 Bay Rd.Redwood City, CA 94063 Phone: 800-757-6773Contact: John [email protected]
Chemcoat, Inc.2790 Canfields Ln.Montoursville, PA 17754 Phone: 800-326-9471Contact: Art [email protected]
Chemical Products Industries7649 SW 34th St.Oklahoma City, OK 73179 Phone: 405-745-2070Contact: Jordan [email protected]
Chemline5151 Natural Bridge Rd.St. Louis, MO 63115 Phone: 314-664-2230Contact: Steve [email protected]
ChemMasters, Inc.300 Edwards St.Madison, OH 44057 Phone: 440-428-2105Contact: John [email protected]
CIM Industries23 Elm St.Peterborough, NH 03458 Phone: 603-924-9481Contact: Becky [email protected]
Cloverdale Paint Inc.6950 King George Blvd.Surrey, BC V3W 4Z1 CanadaPhone: 604-596-6261Contact: Trevor [email protected]
CMP/Chugoku1610 Engineers Rd.Belle Chasse, LA 70037 Phone: 504-392-4817Contact: Nancy [email protected]
Coating Systems & Supply, LLC11479 Darryl Dr.Baton Rouge, LA 70815 Phone: 225-272-6385Contact:Michael R. [email protected]
Coatings For Industry, Inc.319 Township Line Rd.Souderton, PA 18964 Phone: 877-723-0919Contact: Kevin Klotzcficoatings.com
Comex Group5575 DTC Pkwy.Greenwood Village, CO 80111 Phone: 720-873-3060Contact: Customer [email protected]
Composite Technologies2010 Scott Ave.Calberton, NY 11933 Phone: 631-680-0662Contact: Gerald [email protected]
Concrete Coatings Inc.1105 N. 1600 W.Layton, UT 84041 Phone: 801-544-8771Contact: Cory [email protected]
Concrete SolutionsProducts by Rhino Linings9151 Rehco Rd.San Diego, CA 92121 Phone: 800-422-2603Contact: Bart [email protected]
Conklin Company Inc.551 Valley Park Dr.Shakopee, MN 55379 Phone: 800-888-8838Contact: Building Products Groupconklin.com
ConShield Technologies541 10th St., #233Atlanta, GA 30318 Phone: 877-543-2094Contact: Joe [email protected]
Construction Specialties Group, Inc.15783 Crocus LaneDumfries, VA 22025 Phone: 703-670-5300Contact: Neil [email protected]
Construction Systems SupplyPO Box 3894Seattle, WA 98124 Phone: 888-858-3790Contact: Ron [email protected]
Avilion Inc.3947 Lincoln Hwy.Downingtown, PA 19335 Phone: 610-942-7388Contact:Michelle [email protected]
Axalta Coating Systems North America9800 Genard Rd.Houston, TX 77041 Phone: 800-247-3886Contact: Customer [email protected]
BASF Corporation–Construction Systems889 Valley Park Dr.Shakopee, MN 55379 Phone: 800-433-9517Contact: Customer [email protected]
Bechtel Industrial Coating Supply21424 SE 16th Pl.Sammamish, WA 98075 Phone: 425-392-1876Contact: Robert [email protected]
Blendex Industrial Corp.135 Bangor St.Lindenhurst, NY 11757 Phone: 888-376-9935Contact: John [email protected]
Blome InternationalPart of the HEMPEL Group1450 Hoff Industrial Dr.O'Fallon, MO 63366 Phone: 636-379-9119Contact:Marcella [email protected]
Blue River Coatings2910 South Nebraska Ave.Hastings, NE 68901 Phone: 888-420-2628Contact: Phil [email protected]
Blue Water Marine Paint1999 Elizabeth St.North Brunswick, NJ 08902 Phone: 908-967-9867Contact: Paul [email protected]
Bowers Industrial3645 W. 1987 SouthSalt Lake City, UT 84104 Phone: 800-892-5224Contact: Kevin [email protected]
Bradley Coatings Group2873 West Hardies Rd.Gibsonia, PA 15044 Phone: 724-444-4400Contact: Phil [email protected]
Burke Industrial Coatings600 South 74 Pl., #108Ridgefield, WA 98642 Phone: 800-348-3245Contact: Jim Harrisjpharris@burkeindustrialcoatings.comburkeindustrialcoatings.com
Cantex Coatings Ltd.2390 Industrial St.Burlington, ON M7P 1A5 CanadaPhone: 905-319-8972Contact: Jerry Van [email protected]
CANUSA-CPS25 Bethridge Rd.Toronto, ON M9W 1M7 CanadaPhone: 416-744-5798Contact: Bob [email protected]
Capitol Paint Manufacturing Corp.722 SW 23rd St.Oklahoma City, OK 73109 Phone: 405-634-3383Contact: Stan [email protected]
Carboline Company2150 Schuetz Rd.St. Louis, MO 63146 Phone: 314-644-1000Contact: Customer [email protected] our display ad, inside front cover.
CCI Con-Tech of California, Inc.2211 Navy Dr.Stockton, CA 95206 Phone: 209-941-8324Contact: Steven A. [email protected]
Ceilcote (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales [email protected]
Celufibre Industries Inc.14735 - 124th Ave.Edmonton, AB T5L 3B2 CanadaPhone: 780-447-1255Contact: Kevin [email protected]
15
Contego International, Inc.334 Greyhound Pass WestCarmel, IN 46032 Phone: 800-434-6444Contact: Tony [email protected]
Contract Coatings Corporation706 E. Main St.Stockton, CA 95202 Phone: 209-465-2634Contact: Arlen [email protected]
Convenience Products/Seal-Krete306 Gandy Rd.Auburndale, FL 33823 Phone: 800-323-7357Contact: David [email protected] our display ad, p. 70.
Cooley Group50 Esten Ave.Pawtucket, RI 02860 Phone: 401-721-6261Contact: David [email protected]
Copolymer Protection SystemsPO Box 2860Danville, CA 94526 Phone: 925-551-7796Contact: Gerald [email protected]
Copps Industries, Inc.10600 N. Industrial Dr.Mequon, WI 53092 Phone: 800-672-2622Contact: Jeff [email protected]
Corolon Coatings & Corrosion Control Tech. Inc.2 Haas Rd.Toronto, ON M9W 3A2 CanadaPhone: 416-401-8855Contact: Stan E. [email protected]
Corotech High Performance Coatings101 Paragon Dr.Montvale, NJ 07645 Phone: 201-949-6216Contact: Jeffrey T [email protected]
Corporacion Mara SAJr. Pereseo 251Chorrillos, 9 PeruPhone: 51-12013535Contact: Fredy [email protected]
Corrocoat LimitedForster St., LeedsWest Yorkshire, LS10 1PW UKPhone: 44 113 276 0760Contact: Graham Greenwoodcorrocoat.com
Corrocoat USA Inc.6525 Greenland Rd.Jacksonville, FL 32258 Phone: 904-268-4559Contact: Josh [email protected]
Corroseal6107 N. Marine Dr.Portland, OR 97203 Phone: 800-237-1573Contact: Sue [email protected]
Cortec Corporation4119 White Bear Pkwy.St. Paul, MN 55110 Phone: 651-429-1100Contact: Cliff [email protected]
Cote-L Industries Inc.1542 Jefferson St.Teaneck, NJ 07666 Phone: 201-836-0733Contact: Cy [email protected]
CRC-Evans7011 High Life Dr.Houston, TX 77066 Phone: 832-249-3100Contact: Kevin [email protected]
Creto Worldwide125 East Reno Ave., Ste. 1Las Vegas, NV 89119 Phone: 702-372-6274Contact: John [email protected]
Crossfield Products Corp.3000 E. Harcourt St.Rancho Dominguez, CA 90221 Phone: 310-886-9100Contact: Jodi [email protected]
CSL Silicones Inc.144 Woodlawn Rd. WestGuelph, ON N1H 1B5 CanadaPhone: 519-836-9044Contact: Patrick [email protected]
Dow Chemical Company9008 BuildingMidland, MI 48642 Phone: 800-447-4369Contact: Dave Petersondow.com
Dow Corning CorporationPO Box 0994Midland, MI 48686Phone: 800-248-2481Contact: Customer [email protected]/coatings
Dudick, Inc.1818 Miller Pkwy.Streetsboro, OH 44241 Phone: 330-562-1970Contact: Barb [email protected]
Dunn-Edwards4885 E. 52nd Pl.Los Angeles, CA 90058 Phone: 888-337-2468Contact: Customer [email protected]
Duraamen Engineered Products Inc.116 West 23rd St.New York, NY 10011 Phone: 212-386-7609Contact: Victor [email protected]
Duromar, Inc.706 Washington St.Pembroke, MA 02359 Phone: 781-826-2525Contact: Paul [email protected]
Dynafloor Systems553 Highland Rd. E.Macedonia, OH 44056 Phone: 800-453-6366Contact: Jerry [email protected]
Dynamic Coatings Inc.5629 East Westover Ave.Fresno, CA 93727 Phone: 877-225-2549Contact: Peter [email protected]
Dampney Co., Inc.85 Paris St.Everett, MA 02149 Phone: 617-389-2805Contact: Dennis [email protected]
Daubert Chemical Co.4700 S. Central Ave.Chicago, IL 60638 Phone: 708-563-8302Contact: Frank [email protected]
Daubert Cromwell12701 S. Ridgeway Ave.Alsip, IL 60803 Phone: 708-293-7750Contact:Martin [email protected]
Davlin Coatings700 Alston WayBerkeley, CA 94710 Phone: 510-848-2863Contact: Jim [email protected]
Demilec (USA) LLC2925 Galleria Dr.Arlington, TX 76011 Phone: 817-640-4900Contact: Robert [email protected]
Denso North America9747 Whithorn Dr.Houston, TX 77095 Phone: 281-821-3355Contact: Jesse [email protected] our display ad, p. 115.
Dependable, LLCPO Box 16307Rocky River, OH 44116 Phone: 717-951-0494Contact: Joe [email protected]
Devoe High Performance Coatings (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales/Tech. [email protected]
Diamond Vogel Paint Company1110 Albany Pl. SEOrange City, IA 51041 Phone: 712-737-8880Contact: Perry [email protected]
Coating Company Profiles16
Elastomer Specialties Inc.10848 South 265thBroken Arrow, OK 74014 Phone: 918-486-4244Contact: Neil [email protected]
Endura Manufacturing Ltd.12425-149th St.Edmonton, AB T5L 2J6 CanadaPhone: 780-451-4242Contact: Elissa [email protected]
Endur-O-Seal USA, Inc.12502 Lazywood Ln.Pinehurst, TX 77362 Phone: 281-356-5117Contact: Tessi [email protected]
ENECON Corporation6 Platinum Crt.Medford, NY 11763 Phone: 516-349-0022Contact:Mike [email protected]
Enviroline (International Paint LLC)6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales [email protected]
Environmental Protective Coatings Inc.2035 Regency Rd., Ste. 5Lexington, KY 40503 Contact: Homer O. [email protected]
Envirotrol, Inc.2594 Flat Shoals Rd.Conyers, GA 30013 Phone: 770-922-4737Contact: Pat [email protected]
Eoncoat LLC4000 Airport Dr. NWWilson, NC 27896 Phone: 252-360-3110Contact: Jim [email protected]
EPDM Coatings494 Bridgeport Ave., Ste. 101-342Shelton, CT 06484 Phone: 855-281-0940Contact: Kelly [email protected]
Euclid Chemical Company19218 Redwood Rd.Cleveland, OH 44110 Phone: 800-321-7628Contact: Technical [email protected]
Evonik Industries299 Jefferson Rd.Parsippany, NJ 07054Phone: 973-929-8513Contact: Anil [email protected]
Fabick Protective Coatings4118 Robertson Rd.Madison, WI 53714 Phone: 608-242-1100Contact: Steven [email protected]
Farrell-Calhoun Paint221 East CarolinaMemphis, TN 38126 Phone: 901-526-2211Contact: Craig [email protected]
Farwest Corrosion Control Company1480 W. Artesia Blvd.Gardena, CA 90248Phone: 310-532-9314Contact:Marnie [email protected]
Fire Free Coatings Inc.580 Irwin St., Ste. 1San Rafael, CA 94901 Phone: 415-459-6488Contact: Elisa [email protected]
Flame Control Coatings, LLC4120 Hyde Park Blvd.Niagara Falls, NY 14305 Phone: 716-282-1399Contact: Tim [email protected]
Floor Seal Technology, Inc.1005 Ames Ave.Milpitas, CA 95035 Phone: 408-590-4849Contact: Bill [email protected]
FLOROCK, Crawford Labs, Inc.4165 S. Emerald Ave.Chicago, IL 60609 Phone: 800-356-7625Contact: Customer [email protected]
FSC Coatings Inc.5360 Eastgate Mall Rd., Ste FSan Diego, CA 92121 Phone: 800-579-8459Contact: Steve [email protected]
G3 Tapes11639 Riverside Dr., Ste. 103Lakeside, CA 92040 Phone: 619-448-4439Contact:Meghan [email protected]
Gaco Western, LLC200 West Mercer St., Ste. 202Seattle, WA 98119 Phone: 800-456-4226Contact: Customer [email protected]
Gelest, Inc.11 E. Steel Rd.Morrisville, PA 19067 Phone: 215-547-1015Contact: Gabrielle [email protected]
Gemite Products Inc.1787 Drew Rd.Mississauga, ON L5S 1J5 CanadaPhone: 888-443-6483Contact: Igor [email protected]
Georg Fischer Central Plastics39605 IndependenceShawnee, OK 74804 Phone: 800-654-3872Contact:Mark [email protected]
Gill Industries, Inc.3462 Kershaw Camden Hwy.Lancaster, SC 29720 Phone: 803-285-4831Contact: G. Shane [email protected]
Glidden Professional15885 W. Sprague Rd.Strongsville, OH 44136 Phone: 800-984-5444Contact: [email protected]
Global EcoTechnologiesPO Box 2205Antioch, CA 94531 Phone: 925-473-9250Contact: Scott [email protected]
Global Industrial Coatings11130 Twitty Dr.Rolla, MO 65401 Phone: 573-364-2722Contact: George [email protected]
Goodwest Linings and Coatings8814 Industrial Ln.Rancho Cucamonga, CA 91730 Phone: 951-236-7576Contact: Patrick [email protected]
Groco Specialty Coatings10818 C.F. Hawn Fwy.Dallas, TX 75217 Phone: 972-286-7890Contact: Bob [email protected]
Gulf Coast Paint Mfg., Inc.30075 County Rd. 49Loxley, AL 36551 Phone: 251-964-7911Contact: John R. [email protected]
hci chemtech, inc.310 S. Bellis St.Wausau, WI 54403 Phone: 800-596-6282Contact: Cheryl [email protected]
HDIM Protective Coatings14538 121A Ave.Edmonton, AB T5L 4L2 CanadaPhone: 780-482-4346Contact: Norm [email protected]
Hempel (USA) Inc.600 Conroe Park North Dr.Conroe, TX 77303 Phone: 936-523-6000Contact:Marcella [email protected] our display ads, pp. 54, 82, and 100.
Heresite Protective Coatings, LLC822 South 14th St.Manitowoc, WI 54220 Phone: 920-684-6646Contact: Greg [email protected]
Highland International, Inc.465 Industrial Park Dr., PO Box 3564Boone, NC 28607 Phone: 828-265-2513Contact: Katie Dudakduda@highland-international.comhighland-international.comSee our display ad, p. 61.
Hi-Tech Concrete Coatings Inc.430 Oak Ln.Lititz, PA 17543 Phone: 717-664-4006Contact: Brian A. [email protected]
Coating Company Profiles17
Industrial Maintenance Group, Inc.1904 Industrial Park Dr.Plant City, FL 33566 Phone: 813-659-3512Contact: Pete Van Fossenpete@industrialmaintenancegroup.comindustrialmaintenancegroup.com
Industrial Nanotech Inc.1925 Trade Center Way, Ste. 1Naples, FL 34109 Phone: 800-767-3998Contact: Francesca [email protected]
Inliner Technologies1468 West Hospital Rd.Paoli, IN 47454 Phone: 812-723-0704Contact: Geoff [email protected]
Innovative Coatings1685 Rossi Dr.Windsor, ON N9A 6J3 CanadaPhone: 519-737-9046Contact:Wayne [email protected]
Insulating Coatings Corporation27 Link Dr., Ste. DBinghamton, NY 13904 Phone: 800-223-8494Contact: Rick [email protected]
Integrated Protective Coatings Inc.7036 - 50th St.Edmonton, AB T6B 2J8 CanadaPhone: 780-456-3467Contact: Andrew [email protected]
Intercoastal Paint Co.14029 W. Hardy Rd.Houston, TX 77060 Phone: 281-448-5258Contact: Heidi [email protected]
International Cellulose Corporation12315 Robin Blvd.Houston, TX 77045 Phone: 800-444-1252Contact: Chuck [email protected]
International Chem-Crete Corp.800 Security RowRichardson, TX 75081 Phone: 972-671-6477Contact: Jay [email protected]
International Coatings311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 800-624-8919Contact: Eileen [email protected]
International Metal Fusion Corporation900 NW 10th Ave.Fort Lauderdale, FL 33311 Phone: 409-515-0532Contact: Abad [email protected]
International Paint LLC6001 Antoine Dr.Houston, TX 77091 Phone: 800-589-1267Contact: Sales [email protected] our display ad, p. 63.
International Polyurethane Systems5590 46th Ave. SESalmon Arm, BC V1E 4S1 CanadaPhone: 250-832-5142Contact: Don [email protected]
IPA Systems, Inc.2745 N. Amber St.Philadelphia, PA 19134 Phone: 215-425-6607Contact: John [email protected]
IPS Polymers Systems8530 Milliken Ave.Rancho Cucamonga, CA 91730 Phone: 909-941-4999Contact: Amy [email protected]
Isolatek International41 Furnace St.Stanhope, NJ 07874 Phone: 800-631-9600Contact: Sean [email protected]
ITW Devcon30 Endicott St.Danvers, MA 01923 Phone: 800-933-8266Contact: Jessica [email protected]
ITW Polymers Coatings North America12055 Cutten Rd.Houston, TX 77066 Phone: 267-646-1437Contact: Alan [email protected] our display ad, p.120 .
Hi-Temp Coatings TechnologyPO Box 2347Acton, MA 01720 Phone: 978-635-1110Contact:Mike [email protected]
HJ3 Composite Technologies2440 West Majestic Park WayTucson, AZ 85705 Phone: 520-322-0010Contact: John [email protected]
Huntsman Polyurethanes2190 Executive Hills Blvd.Auburn Hills, MI 48326 Phone: 248-322-7431Contact: Kevin A. [email protected]/pu/ace
Hydra Tech Engineered Products10448 Chester Rd.Cincinnati, OH 45215 Phone: 513-827-9169Contact: Tim [email protected]
Hydrex Underwater Technology604 Druid Rd. E.Clearwater, FL 33756 Phone: 727-443-3900Contact: John [email protected]
Hyperseal34-801 Spyder Cir.Palm Desert, CA 92211 Phone: 760-324-7900Contact: Brian [email protected]
IndMar Coatings Corporation317 W. Main St., PO Box 456Wakefield, VA 23888 Phone: 757-899-3807Contact:Wilmer [email protected]
Induron Coatings, Inc.3333 R. Arrington Jr. Blvd. N.Birmingham, AL 35234 Phone: 800-324-9584Contact: Jeff [email protected]
Industrial Coatings & Sealants12521 Evergreen Dr., Ste. BMukilteo, WA 98275 Phone: 425-742-5693Contact: Greg [email protected]
Jamestown Coating Technologies108 Main St.Jamestown, PA 16134 Phone: 724-932-3101Contact:Michael [email protected]
Johnson Industrial Coatings10436 N. NC Hwy. 150Clemmons, NC 27012 Phone: 336-764-1648Contact: Jay [email protected]
Jotun Paints Inc.842 W. Sam Houston Pkwy. N. City Center Three, Ste. 300Houston, TX 77024 Phone: 314-616-1797Contact: [email protected] our display ads, pp. 74 and 106.
Kaufman Products, Inc.3811 Curtis Ave.Baltimore, MD 21226 Phone: 800-637-6372Contact: Alex [email protected]
KCC Corrosion Control Co., Ltd.4018 Trey Dr.Houston, TX 77084 Phone: 281-550-1199Contact: Owen T. [email protected]
Kelly-Moore Paint Company987 Commercial St.San Carlos, CA 94070 Phone: 800-874-4436Contact: Rusty [email protected]
KEMA Coatings LImited60 Wyndham St. South, Unit 904Guelph, ON N1E 7H7 CanadaPhone: 519-826-9374Contact:Mark [email protected]
Kemper System America, Inc.1 Reuten Dr.Closter, NJ 07624 Phone: 800-541-5455Contact: James [email protected]
Key Resin Company4050 Clough Woods Dr.Batavia, OH 45103 Phone: 888-943-4532Contact: Eric [email protected]
Coating Company Profiles18
Pacific Southwest Coatings18220 Watson WayYorba Linda, CA 92886 Phone: 714-225-3688Contact: Laurence [email protected]
Paragon Fusionclad809 77 Ave.Edmonton, AB T6P 1S9 CanadaPhone: 780-461-7719Contact: Dean [email protected]
Pecora165 Wambold Rd.Harleysville, PA 19438 Phone: 215-799-7530Contact: Alicia [email protected]
Peerless Industrial SystemsPO Box 2041Hampton East, 03189 AustraliaPhone: 61 408 949 368Contact: Nick [email protected]
peerlessindustrialsystems.com
Pilgrim Permocoat402 South 22nd St.Tampa, FL 33605 Phone: 800-637-3328Contact: Robert [email protected]
Plastocor Inc.100 Research Rd.Hingham, MA 02043 Phone: 724-942-0582Contact: Jim [email protected]
The Platt Brothers & CompanyPO Box 1030Waterbury, CT 06721 Phone: 203-753-4194Contact: David [email protected]
Plexi-Chemie, Inc.606 Lane Ave. North, Ste. 6Jacksonville, FL 32043 Phone: 904-693-8800Contact: Elizabeth [email protected]
Polar IndustriesPO Box 293Fisher Branch, MB R0C 0Z0 CanadaPhone: 786-955-4008Contact: Lillian [email protected]
Neogard2728 Empire CentralDallas, TX 75235 Phone: 214-353-1689Contact: Bob [email protected]
NIC Industries7050 6th St.White City, OR 97503 Phone: 541-826-1922Contact: Jeff [email protected]
Normac Adhesive Products Inc.1350 Heine Crt.Burlington, ON L7L 6M4 CanadaPhone: 905-332-6455Contact: George [email protected]
Northern Industries Inc.429 Tiogue Ave.Coventry, RI 02816 Phone: 401-821-2121Contact: Rick [email protected]
NOV Tuboscope2835 Holmes Rd.Houston, TX 77051 Phone: 713-799-5130Contact: Ryan [email protected]
Nox-Crete Products Group1444 S. 20th St.Omaha, NE 68108 Phone: 402-341-2080Contact: Customer [email protected]
NSP Specialty ProductsPO Box 4690Pinehurst, NC 28374 Phone: 910-235-0468Contact: Larry [email protected]
Oak Ridge Chemical and Equipment575 Commercial Ave.Green Lake, WI 54941 Phone: 800-625-9577Contact: Jed [email protected]
OCM–Adeka1215 Henri Dr.Wauconda, IL 60084 Phone: 866-457-5710Contact:Mike [email protected]
Klaas Coatings (North America) LLCPO Box 25122Dallas, TX 75225 Phone: 866-317-3633Contact: Richard Taylorinfo@klaascoatings-northamerica.comklaascoatings-northamerica.com
KOSTER American Corp.2585 Aviator Dr.Virginia Beach, VA 23453 Phone: 757-425-1206Contact: Ray [email protected]
Kryton International Inc.1645 East Kent Ave.Vancouver, BC V5P 2S8 CanadaPhone: 604-324-8280Contact: Isabella [email protected]
Linabond1161 Avenida AcosoCamarillo, CA 93012 Phone: 818-362-7373Contact: Georgia [email protected]
Liquid Metal Coatings, LLC7015 W. 16th Ave.Lakewood, CO 80215 Phone: 303-202-204Contact: Bob Scheckliquidmetalcoatings.com
Lone Star Specialties, LLC6412 US Hwy. 259 SouthLone Star, TX 75668 Phone: 903-656-2536Contact: Tony Thigpenlonestarspecialties.net
Lonza Microbial Control5660 New Northside Dr., Ste. 1100Atlanta, GA 30328 Phone: 800-523-7391Contact: Damali [email protected]
LuminOre6060 Corte del CedroCarlsbad, CA 93011 Phone: 760-431-7705Contact: Jenny [email protected]
MMad Dog Primer309 Plum St. N.Northfield, MN 55057 Phone: 507-645-7431Contact: Steve [email protected]
Madison Chemical Industries490 McGeachie Dr.Milton, ON L9T 3Y5 CanadaPhone: 905-878-8863Contact: Kim [email protected]
Mascoat4310 Campbell Rd.Houston, TX 77041 Phone: 713-465-0304Contact: Chad [email protected] our display ad, p. 56.
Micor Company, Inc.3232 N. 31st St.Milwaukee, WI 53216 Phone: 800-284-4308Contact: Bill [email protected]
Midsun Group, Inc.135 Redstone St.Southington, CT 06480 Phone: 860-378-0100Contact: Andy [email protected]
Morin Industrial Coatings Ltd.Box 765Lively, ON P3Y 1M7 CanadaPhone: 705-692-9090Contact: Adam [email protected]
Nanochem Technologies1203 Kent St.Elkhart, IN 46514 Phone: 574-970-2436Contact: Richard J. [email protected]
National Polymers Inc.9 Guttman Ave.Charleroi, PA 15022 Phone: 724-483-9300Contact: Erica [email protected]
Nationwide ChemicalCoating Mfrs., Inc.7106 24th Crt. EastSarasota, FL 34243 Phone: 800-423-7264Contact: [email protected]
Coating Company Profiles19
Polibrid Coatings, Inc.6700 F.M. 802Brownsville, TX 78526 Phone: 956-831-7818Contact: Klaus D. [email protected]
Polycoat Products14722 Spring Ave.Santa Fe Springs, CA 90670 Phone: 562-802-8834Contact: Joe [email protected]
Polycorp Ltd.33 York St.Elora, ON N0B 1S0 CanadaPhone: 519-846-2075Contact: Dennis [email protected]
Polyguard Products, Inc.PO Box 755Ennis, TX 75120 Phone: 281-580-5700Contact: Chic [email protected]
Polymax/Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 405-755-8454Contact: Joanne [email protected]
Polytech Industrial Coatings, Inc.PO Box 12407Fresno, CA 93777 Phone: 800-507-2953Contact: Andrew [email protected]
polytechindustrialcoatings.com
Polyval Coatings520 Boul Cure BoivinBoisbriand, QC H3S 2N6 CanadaPhone: 800-465-0905Contact:Marc [email protected]
PPC Coatings (MTR)2 Pixie Rd.Wilmington, DE 19810 Phone: 877-588-2227Contact: Cliff [email protected]
PPG Protective & Marine CoatingsOne PPG Pl.Pittsburgh, PA 15272 Phone: 888-977-4762Contact: Steve [email protected] our display ad, p. 116.
Precision Coatings Inc.1940 East TrafficwaySpringfield, MO 65802 Phone: 888-340-6780Contact: Jim O’[email protected]
Preferred Products Corp.231 S. 3rd St.Burlington, IA 52601 Phone: 319-754-4823Contact: Ken [email protected]
Premier Coating Systems Inc.606 N. Lane Ave., #6Jacksonville, FL 32254 Phone: 904-824-1799Contact: Ron [email protected]
Prime Coat Coating Systems405 Oakwood Ave.Waukegan, IL 60085 Phone: 847-362-5111Contact: Kevin [email protected]
Professional Products of Kansas, Inc.4456 S. CliftonWichita, KS 67216 Phone: 316-522-9300Contact: Vicky [email protected]
Protective Floorings and Linings a Div. of Milamar Coatings LLC311 NW 122nd St., Ste. 100Oklahoma City, OK 73114 Phone: 405-755-8454Contact: Joanne [email protected]
Protecto Wrap Company1955 Cherokee St.Denver, CO 80223 Phone: 800-759-9727Contact: Victoria [email protected]
Protek Paint Ltd.335 Horner Ave.Toronto, ON M8W 1Z6 CanadaPhone: 800-773-5233Contact: Barry [email protected]
Pyrotech1121 Hellam St.Monterrey, CA 93940 Phone: 630-628-1120Contact: Jim [email protected]
Quadex/Interfit USA4801 Crystal Hill Rd.North Little Rock, AR 72118 Phone: 501-758-8628Contact: Stuart [email protected]
Quality Systems, Inc./Permacrete1101 Menzler Rd.Nashville, TN 37210 Phone: 615-331-9200Contact: George [email protected]
Randolph Products33 Haynes Cir.Chicopee, MA 01020 Phone: [email protected]
Raven Lining Systems13105 East 61st St., Ste. ABroken Arrow, OK 74012 Phone: 800-324-2810Contact: Kaye [email protected]
REMA Corrosion Control, Inc.119 Rockland Ave.Northvale, NJ 07647 Phone: 440-781-6226Contact: Larry [email protected]
Rhino Linings Corporation9151 Rehco Rd.San Diego, CA 92121 Phone: 800-422-2603Contact: Tim [email protected]
Richard’s Paint Mfg. Co., Inc.200 Paint St.Rockledge, FL 32955 Phone: 800-432-0983Contact: Eric [email protected]
Riley Paint Company106 Washington St.Burlington, IA 52601 Phone: 319-759-2516Contact: John [email protected]
Rock-Tred Corporation405 Oakwood Ave.Waukegan, IL 60085 Phone: 847-673-8200Contact: Erik [email protected]
Rodda Paint Co./Cloverdale Paint6107 N. Marine Dr.Portland, OR 97203 Phone: 503-572-8201Contact: Tom [email protected]
RoofMart International Inc.2735 Rain Rd., PO Box 502Chapman, KS 67431 Phone: 800-345-1439Contact: Customer [email protected]
Roval USA Corp.12270 NW Luoto Ln.Carlton, OR 97111 Phone: 971-237-0958Contact: Aldo [email protected]
Royce International LLC3400 S. Tamiami TrailSarasota, FL 34239 Phone: 941-894-1228Contact: Christine [email protected]
Rust Bullet, LLC300 Brinkby Ave., Ste. 200Reno, NV 89509 Phone: 775-829-5606Contact: Kathline A. [email protected]
Safe Encasement Systems1795 N. Snow Canyon Pkwy., Unit 63St. George, UT 84770 Phone: 888-277-8834Contact: John [email protected]
Sampson Coatings1900 Ellen Rd.Richmond, VA 23230 Phone: 804-349-2820Contact: Joe [email protected]
Sauereisen, Inc.160 Gamma Dr.Pittsburgh, PA 15238 Phone: 412-963-0303Contact: Lake [email protected]
SaverSystems/Defy800 South 7th St.Richmond, IN 47374 Phone: 800-860-6327Contact: Customer [email protected]
Coating Company Profiles20
Seacoat Technology11215 Jones Rd. W., Ste. HHouston, TX 77065 Phone: 832-237-4400Contact: John [email protected]
Seal For Life IndustriesPart of Berry Plastics Engineered Materials DivisionGasselterstraat 20Stadskanaal, 9503JB NetherlandsPhone: 31 599 696170Contact: J.F. [email protected] our display ad, p. 88.
ShawCor CSI Services1607-10 St.Nisku, AB T9E 0A7 CanadaPhone: 403-218-8262Contact: Sam [email protected]
Sherwin-Williams101 Prospect Ave. NWCleveland, OH 44115 Phone: 800-524-5979Contact: Customer [email protected]/protectiveSee our display ads, pp. 40, 138, and 146.
Simco Coatings Inc.211 Gunther LaneBelle Chasse, LA 70037 Phone: 504-393-9455Contact: Paul [email protected]
Simpson Strong-TiePO Box 10789Pleasanton, CA 94588 Phone: 800-999-5099Contact: Edward [email protected]
SOPREMA310 Quadral Dr.Wadsworth, OH 44281 Phone: 800-356-3521Contact: Jason [email protected]
Soprema, Inc.1688 J.B. MichaudDrummondville, QC J2C 8E9 CanadaPhone: 819-478-8166Contact: Dennis [email protected]
SpecChem1511 Baltimore Ave.Kansas City, MO 64108 Phone: 866-791-8700Contact:Mike [email protected]
Specguard909 Mahar Ave.Wilmington, CA 90744 Phone: 310-834-7037Contact: Larry [email protected]
Specialty Products, Inc. (SPI)2410 104th St., Ct. S., Ste. DLakewood, WA 98499 Phone: 253-588-7101Contact: Chas [email protected]
SpectraShield Liner Systems4527 Sunbeam Rd.Jacksonville, FL 32257 Phone: 904-419-4889Contact: Bob [email protected]
SpeedCove Inc. DBA Solid Rock Enterprises5781 Pleasant Valley Rd.El Dorado, CA 95623 Phone: 530-344-9000Contact: Doug [email protected]
Sprayroq248 Cahaba Valley Pkwy.Pelham, AL 35124 Phone: 205-957-0020Contact: Jerry [email protected]
Stirling Lloyd Group Plc.Union Bank, King St.Knutsford, Cheshire, WA16 6EF UKPhone: 44-1565 633111Contact: Dave [email protected]
Stirling Lloyd Products Inc.152 Rockwell Rd., Bldg. ANewington, CT 06111 Phone: 860-666-5008Contact: Tom [email protected]
Sto Corp.3800 Camp Creek Pkwy.Atlanta, GA 30331 Phone: 678-553-3269Contact: Thomas [email protected]
SpeedCove3 wrule:Layout 1 10/9/09 3:21 P
The Strong Company, Inc.4505 Emmett Sanders Rd.Pine Bluff, AR 71601 Phone: 870-535-7617Contact: Billy [email protected]
Sub-One Technology4464 Willow Rd., Bldg. 103Pleasanton, CA 94588 Phone: 925-924-1020Contact: Dore [email protected]
Subsea Industries NVHaven 29 - Noorderlaan 9Antwerp, 2030 BelgiumPhone: 32-3 213 53 18Contact:Manuel [email protected]
Sulzer Metco1101 Prospect Ave.Westbury, NY 11590 Phone: 800-638-2699Contact: Customer [email protected]
Superior Epoxies & Coatings Inc.2527 Lantrac Ct.Decatur, GA 30035 Phone: 800-240-1310Contact: John [email protected]
Sureshield Coatings Company350 Northgate Pkwy.Wheeling, IL 60090 Phone: 847-291-6960Contact:Michael [email protected]
TCI Coatings Inc.220 Industrial Blvd.Austin, TX 78745 Phone: 512-444-2824Contact: Kevin [email protected]
Termarust Technologies8150 Rue de L’IndustrieMontreal, QC H1J 1S7 CanadaPhone: 888-279-5497Contact: Craig [email protected] our display ad, p. 47.
Tesla NanoCoatings, Inc.6200 Frank Ave. NW Advanced Technical Center, T101North Canton, OH 44720 Phone: 610-764-1232Contact: Joe [email protected]
Coating Company Profiles21
Textured Coatings of America2422 E. 15th St.Panama City, FL 32405 Phone: 800-454-0340Contact: Regina [email protected]
ThermionPO Box 780Silverdale, WA 98383 Phone: 877-884-3428Contact: Dean [email protected]
Thin Film Technology, Inc.802 Utah St.South Houston, TX 77587 Phone: 713-910-6200Contact: Jeff [email protected]
The Thortex Group12 Iron Bridge Dr.Collegeville, PA 19426 Phone: 610-831-0222Contact: Kevin [email protected]
3L&T Inc.897 Independence Ave., #1BMountain View, CA 94043 Phone: 650-625-0177Contact: Linas [email protected]
3M Atlanta3700 Atlanta Industrial Pkwy.Atlanta, GA 30331 Phone: 404-696-2730Contact: Abdul Razzak3m.com
3M Electrical Markets Division6801 River Pl. Blvd., 147-4N-01Austin, TX 78726 Phone: 512-984-7801Contact:Michelle [email protected]/corrosion
TMS Manufacturing Co.3555 W. 123rd St.Alsip, IL 60803 Phone: 708-385-6633Contact:Michael [email protected]
TMS Metalizing Systems, Ltd.7665 NW Eldorado Blvd., #101Bremerton, WA 98312 Phone: 360-692-6656Contact: Dave [email protected]
Tnemec Company, Inc.515 E. Main St.Boonville, IN 47601 Phone: 812-449-0167Contact:Michael [email protected]
Tnemec Company, Inc.6800 Corporate Dr.Kansas City, MO 64120 Phone: 816-483-3400Contact:Mark [email protected]
Total Containment Solutions Inc.11000 Metro Pkwy., Ste. 20Fort Myers, FL 33966 Phone: 239-275-6235Contact:Michael [email protected]
Total Wall390 Viking Cir.Rio, WI 53960 Phone: 888-702-9915Contact: Octavian [email protected]
TPR2 Corporation36 Plains Rd.Essex, CT 06426 Phone: 860-767-8772Contact: Brian [email protected]
Transpo Industries Inc.20 Jones St.New Rochelle, NY 10801 Phone: 914-636-1000Contact: John [email protected]
Trenton Corporation7700 Jackson Rd.Ann Arbor, MI 48103 Contact: Frank Ramptontrentoncorp.com
Tuf Top Coatings4590 60th Ave. N.St. Petersburg, FL 33714 Phone: 727-527-3382Contact: Greg [email protected]
U.S. Coatings, LLCPO Box 220313St. Louis, MO 63122 Phone: 314-205-1500Contact: Larry [email protected]
Ultimate Linings6630 Roxburgh Ave., #175Houston, TX 77041 Phone: 562-802-8834Contact: Stacy [email protected]
US Coating Solutions5948 Emerson Ave.Minneapolis, MN 55419 Phone: 386-313-3033Contact: Garry [email protected]
VersaFlex Incorporated686 S. Adams St.Kansas City, KS 66105 Phone: 913-321-9000Contact: Todd [email protected]
Visuron Technologies Inc.5174 McGinnis Ferry Rd.Ste. 106Alpharetta, GA 30005 Phone: 770-815-4548Contact: Tim [email protected]
W.R. Meadows300 Industrial Dr.Hampshire, IL 60140 Phone: 800-342-5976Contact: Jason [email protected]
Walla Walla Environmental4 West Rees Ave.Walla Walla, WA 99362 Phone: 509-522-0490Contact: Cassie [email protected]
Wasser Corporation4118 B Pl. NW, Ste. BAuburn, WA 98001 Phone: 800-627-2968Contact: Kevin [email protected] our display ad, p. 143.
Watson Coatings, Inc.325 Paul Ave.St. Louis, MO 63135 Phone: 314-521-2000Contact: Paul [email protected] our display ad, p. 51.
Westcoat770 Gateway Center Dr.San Diego, CA 92102 Phone: 800-250-4519Contact: Dean [email protected]
WFI Global, LLC4118 Robertson Rd.Madison, WI 53714 Phone: 618-978-1119Contact: Gary [email protected]
Whitford Corporation47 Park Ave.Elverson, PA 19520 Phone: 610-286-3500Contact: Brian [email protected]
Wilko Paint, Inc.2727 OhioWichita, KS 67219 Phone: 800-658-3799Contact: Don [email protected]
Williams-Hayward Protective Coatings7425 West 59th St.Summit, IL 60501 Phone: 708-563-5182Contact: Edward [email protected]
ZRC Worldwide145 Enterprise Dr.Marshfield, MA 02050 Phone: 800-831-3275Contact: Lorraine [email protected]
Coating Company Profiles22