Guide to Kingdoms of Camelot

Scripts and Tools

This is a large tutorial , and some parts are still “work in progress”…

Index

- Introduction

- Step 1: Install GreaseMonkey

- Step 2: Install KoC Power Bot

- Step 3: Install KoC Tools

- Step 4: Install Throne Room & Champ Organizer

- Step 5: Install KoC Battle Console ( Optional)

- Step 6: You have now the scripts installed.

- Step 7: Login to the game.

- Step 8 : Configure BOT

- Step 9 : Configure BOT - Tower Tab

- Step 10 : Configure BOT - Build Tab

- Step 11: Configure BOT - Craft Tab

- Step 12 : Configure BOT - Reassign Tab

- Step 13 : Configure BOT - Search Tab

- Step 14: Configure BOT - Attack Tab

- Step 15: Configure BOT - Transport Tab

- Step 16 : Configure BOT - Raid Tab

- Step 17: Configure BOT - Train Tab

- Step 18: Configure BOT - Dark Forest Tab

- Step 19 : Configure BOT - Apothecary Tab

- Step 20 : Configure BOT - Spam Tab

- Step 21 : Configure BOT – Farm Tab

- Step 22 : Configure BOT - Population Tab

- Step 23 : Configure BOT - Inventory Tab

- Step 24 : Configure BOT - Whisper Tab

- Step 25: Configure BOT - Gift Tab

- Step 26 : Configure BOT – Nomads Tab

- Step 27 : Configure BOT – Start Up Tab

- Step 28 : Configure BOT - Scout Reports Tab

- Step 29: Configure TOOLS

- Step 30: Configure TOOLS - Overview TAB

- Step 31: Configure TOOLS - Overview -The Resource sub tab

- Step 32: Configure TOOLS - Overview -Troop sub tab

- Step 33: Configure TOOLS - Overview -Building sub tab

- Step 34: Configure TOOLS - Overview -Info Tab

- Step 35: Configure TOOLS - Train Tab

- Step 36: Configure TOOLS - March TAB

- Step 37: Configure TOOLS - Alliance TAB

- Step 38: Configure TOOLS - Tournament Tab

- Step 39: Configure TOOLS - Wilds Tab

- Step 40: Configure TOOLS - Tower Tab

- Step 41: Configure TOOLS - KNIGHTS TAB

- Step 42: Configure TOOLS - Player Tab

- Step 43: Configure - Throne Room & Champ Organizer. ( TRO)

- Step 44: Configure TRO – Upgrade Tab

- Step 45: Configure TRO –Salvage Tab

- Step 46: Configure TRO –Repair Tab

- Step 47: Configure TRO –Organize Tab

- Step 48: Configure TRO –Caps Tab

- Step 49: Configure TRO –Upgrade Tab

- Step 50: Configure TRO –Salvage Tab

- Step 51: Configure TRO –Organize Tab

- Step 52: Configure TRO –Preview Tab

- Step 53: Configure TRO –Log Tab

- Step 54: Configure TRO –Jewels Tab

- Step 55: Configure TRO –Throne & Champ Presets (Tips& Tricks)

Introduction

In order to start to survive in Kingdoms of Camelot (KoC), you need to be

willing to use the available scripts for the game.

The primary scripts that are required are the KoC Bot, KoC Tools and the

KoC Throne Room & Champ Organizer. Optionally, but highly

recommended you can use Battle Dashboard as well.

PLS Note, that in the near future, BOT, TOOLS & Battle DashBoard will

be available in 1 script. A so called AIO ( All in One)

Below a preview of the new enhanced configurable quick march tab of the

AIO. ( Not released yet, subject to change)

This guide will cover the installation and basic configuration of the scripts

to help you get started in the game and get you started.

All of this guide is based off the prerequisite that you have Firefox installed

or a Firefox clone or offspring like Cometbird, Palemoon etc.

All version of FF ( and other browsers you can find on oldapps.com)

http://www.oldapps.com/firefox.php

I personally use version 29.0 and lock it so it doesn’t update to latest version.

You can goto version 31.0 without any problems. Version 29 is

recommended by Barbarossa69 for his scripts.

Goto Tools Tab in YOUR BROWSER and Select OPTIONS, you get a pop-

up as you can see below.

Goto ADVANCED tab in this pop up.

Select Never check for updates, this way your browser STAYS on the

version selected & Installed.

Step 1: Install GreaseMonkey

https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/?page=1#version-1.15

Install version 1.15.1

Once installed it will turn up in Extensions,

Once it is installed, you need to restart firefox.( or FF based equivalent)

You can confirm it is installed in firefox by going to the Tools -> Add-Ons menu. Then

click Extensions side tab. You will see Greasemonkey listed now.

Click the more tab.

Select OFF, so greasemonkey wont update and stay on verion 1.15.1 (Important!)

Step 2: Install KoC Power Bot

Go to: https://greasyfork.org/en/scripts/892-koc-

power-bot

Click on “install this script” link to install

The open up a pop-up asking if you want to trust the source and install.

After install refresh via F5

Step 3: Install KoC Tools

https://greasyfork.org/en/scripts/893-koc-power-tools

Click “Install this script” Then

click install when the popup

shows.

After install refresh via f5

Step 4: Install Throne Room & Champ Organizer

Click Install (Green box) and after install refresh via F5

Step 5: Install KoC Battle Console ( Optional)

Click Install (Green box)

This script has its own guide, you can download it here :

http://www.slideshare.net/Aderik/battle-dashboard-tutorial

Step 6: You have now the scripts installed.

You can check that via add-ons manager, should give you as above

All scripts can be found on GreasyFork.org

Step 7: Login to the game.

Go to KoC, through either Facebook, or kabam.

Step 8: Configure BOT

When you start off, the game will be centered in the middle of your browser,

and you will see new Tabs at the top.

Could look similar to this:

Click the “BOT” tab

Then click the Options tab. I have included screenshots of my general

settings:

Select all the relevant options for you as indicated here.

Do not select the last 2 options here above, do AFK events/ post missed and expired

marches.

Select, refresh Koc every XXX minutes. I selected 150 minutes for scouting a province,

but when not scouting I remove the 0 so it normally refreshes every 15 minutes.

Select what suits you.

Be wise as well on the food alert, if you set it too high you can clutter up alliance chat.

The auto select city on start up, should be your attack city, or the city you use the most.

In my case that is Aegisir ( city 1)

In the next section , tick the relevant options, great for clearing your reports.

Show tile levels , is good to check for Mercenary events to level of merc camps and

maybe even for the Upcoming feature Nomad Camps.

Outline city tabs will give you a blue outline when a city is NOT defending and a

red outline when defending.

For configuring the game views, you can review this guide as well:

http://www.slideshare.net/Aderik/game-view-with-dashboard-battle-

monitor-more

Click on the BOT tab again, we will now start configuring the most

important pieces:

Step 9: Configure BOT - Tower Tab

Fill out the options you want to use for the tower.

Tower alerts part is rather self explaining, you can untick cities if you don’t want

alerts.

The Setup part I have all ticked, except the email alert.

The Action part, is clear, and it is perfect if you wan to change your preset from an

AFK or Training preset to a defending preset or another good option is a preset with

HIGH load debuff. ( 10k -15k)

For a usefull guide about an AFK preset with load debuff you can read

here:

http://www.slideshare.net/Aderik/afk-throne-room-load-debuff

Step 10: Configure BOT - Build Tab

Building Tab lets you queue your builds easily. Per city to standard

level 9, but you can choose the higher levels as well.

-Ask for help needs to be ticked to get build help from Alliance.

-Use both build queues needs to be ticked if you are a Round Table Member

to benefit from 2 building queues simultaneously.

-Just make sure that you are close or have reached the cap on construction

speed (600) so you can build as quickly as possible.

And your building will progress till the queues are finished.

Step 11: Configure BOT - Craft Tab

Click on Craft Tab

Click “Crafting” button until it says “Crafting = ON”

Enter quantity and click “Save Settings”

If you have a lot of speed ups you can make for example Lesser Lucky

Tokens very quickly by using auto speed ups. Recipe for LLT is with full

crafting speed around 1 hour so a Guinevere’s hourglass (1hr) makes it

instant. Only tick that if you want that option.

You should be cresting base ingredients NON STOP , like Ohrstone, Flax

wings, Keterstone, Bloodstone.

You should be Crafting ;

Protection Stones

Lesser Lucky Tokens

Journymans

Horn of Plenty

Blood fury

Stoneskin

Red Dragon Wings

Step 12: Configure BOT - Reassign Tab

Reassign will help moving troops when Ascension Protection is up and you

need to move them to the new AP city. Or as an automated function to

reassign trained troops to your AP city. The top is rather self-explaining.

Click the city where the troops are coming from and select the city where

they are going to.

Select the troops you want to keep, either as 0 or a fixed amount ( like always

500k wagons and everything over that reassign to city X)

Then Click “ add reassign route”

In Show routes you can see what you are moving and to where.

In this case all troops are selected and are moving from city 1 to city 8.

- If you have reassign on 0 minutes, it will be blazing fast but with large

troop quantities you may end up with Captcha. If the numbers are

reasonable, you can try on 0 minutes or 1 minute.

- If you have a lot of troops to move you may consider activating 1 of

the 2 Auras available that increase the maximum numbers of troops

per march, either by 15% or 30% for 1 hour. It really makes a

difference.

- If your AP city for example is ( always) a FEY you can also use the

blessing “ Fill the ranks” giving your RP a permanent additional 10%

increase. In the end it all adds up, and more troops being moved per

march shortens the overall reassign time considerably. 40% increase (

Dominion + Blessing) you can have guaranteed by doing as described

above.

Step 13: Configure BOT - Search Tab

Perhaps one of the most used tabs, for active players. Searching …

With searching, you search per province or Radius or a piece of a province.

Search tab allows you to look for Cities, Barb Camps or Wilds.

In this case , the province Tintagel is being searched for Misted cities.

Additionally you can tick more options like, Hostile, Friendly, Allied,

Neutral, Un-allianced or all.

When searching is done, click and you get a pop –up.

Select the city you want to scout from, Tick “skip targets when errors occur”

Tick the top part to select all cords to scout.

Scouts will run till the list is finished. Note, set refresh rate of game at 1hour

or more, to avoid a refresh and not finishing the scouting of the province.

This option functions well, and you can

tick it while searching and scouts will be sent straight away, but with lot of

mists or doing for a while it will give you Captcha very quickly.

You can also look for Barbarian camps in radius or province and you can

select which levels to look for.

Also wilds can be searched and in addition, Dark forests and Nomad &Merc

camps (when live). It’s really useful for finding all higher level DF in a

Province or an adjacent Province. When you are in need for Astones for

example.

Powerful tab with lots of options that works as a Golden Retriever on

steroids.

Step 14: Configure BOT - Attack Tab

Find yourself a level 8 or above barb

camp to crest on Fill out the information,

click Add Attack.

You can confirm the attack by clicking

show targets Turn the Crest = ON

The more you crest, the more TR items you will find, and the more

aetherstone you will collect.

You can enter several Barb Camps as Targets, preferably several and

different levels. For example an Barb Camp level 8 + 9 + 10.

Attacking several targets, increases your chances of finding TR items

& other goodies, so do so pls.

If you want to crest the barbarian camps 11-15 you can review the

following tutorial.

http://www.slideshare.net/Aderik/spell-caster-cresting

Step 15: Configure BOT - Transport Tab

I setup my transports to move resources from cities to AP City

City 1-7 has a minimum set ( keep value ) that is just below storehouse level. Even if

they are attacked, they are safe and if they are training then make sure you have

“reverse transport” activated. This ensures , that if a city uses resources, they will get

replenished from your AP city.

NOTE: Keep your Ore numbers below your max – or you will stop the cities from

producing! (stone too) This is if you are producing ore and stone.

Step 16: Configure BOT - Raid Tab

Makes sure its activated to reset the raid clock automatically.

Additionally if you wish to receive a report in a selected timeframe then

tick send raid report every xx. Where xx is the time frame you choose.

Step 17: Configure BOT - Train Tab

Setup the troops you want to train in each city ( also depending on city type)

Step 18: Configure BOT - Dark Forest Tab

Select the city you want to DF from and activate the levels you wish to

attack.

Select the options as above, important is the max search distance, set it 75

and not 40 ( default)

As you see I use scouts for all levels. You can set of course to preference

you want.

You can also review REVISED Dark Forest tutorial here:

http://www.slideshare.net/Aderik/revised-dark-forests-guide-

levels-115

Step 19: Configure BOT - Apothecary Tab

Reviving troops can be set here to continuously revive troops.

Personally I do not use this tab. I only revive certain troops and I do not have

legendary hourglasses anymore.

Using this tutorial if you have really big batches of troops to revive is

certainly helpful as well.

http://www.slideshare.net/Aderik/max-reviving-of-troops

Step 20: Configure BOT - Spam Tab

You can Post a message in Alliance Chat , to remind your members of

something important. Bank Cords, Protected Wild Cords for storage, etc

Handy for Officers, VC’s and Chancellors.

Of course you can also Advertise in Global for your Alliance, to join or else.

Although I find that this function gets mostly abused with insulting or

taunting messages.

Step 21: Configure BOT – Farm Tab

An automated farming function is available also, where after searching on

certain criteria a list is compiled that ,is attacked automatically with set

troops. You can set inactivity of your “farms” etc.

Personally, I do not use this function either. I have some objections against

it. Some that use it, let it run, but are not at the PC and they get also looted

a lot because they are not there to defend what they farm.

Also, I think you should “Farm with care” and not only inactive or small

players.

Step 22: Configure BOT - Population Tab

A very useful function described more in detail in this tutorial.

http://www.slideshare.net/Aderik/training-of-troops

Step 23: Configure BOT - Inventory Tab

Useful option to use to see what you have in inventory and release / use

several items at once.

Step 24: Configure BOT - Whisper Tab

All whispers get logged, and in case you have missed them you can review

here.

Step 25: Configure BOT - Gift Tab

Set who you want to gift daily, all automated

Step 26: Configure BOT - Nomads Tab

To better explain this tab, Have a look at this tutorial

http://www.slideshare.net/Aderik/nomad-camps

Step 27: Configure BOT – Start-Up Tab

To Quickly build up a city and add the buildings to Building Queue.

Step 28: Configure BOT - Scout Tab

You can read the minitutorial here:

http://www.slideshare.net/Aderik/how-to-scout-with-bot-in-kingdoms-of-

camelot

That concludes the basics with the Power Bot. Explore the rest of the tabs,

and talk to your alliance members if something is unclear or how they have

set certain options.

Step 29: Configure TOOLS Click the TOOLS tab at the top of the screen. The tools window pops up.

Then click Options in the tools window.

Below are my preferred settings for the options:

Important, set the time you want your alert for when ascension is running

out. . The city where AP

is running out will turn Amber.

Follow the settings or use it as guidance Most Options are very self-

explaining.

Disable Multi-Browser check v2 (experimental), activate this in order to not

get the warning, you have koc open in multiple windows.

And uncheck, refresh data/marches every 3 minutes.

There is no need to change anything here , unless you want to, but certainly

very self-explanatory if you want to activate or deactivate an option.

Step 30: Configure TOOLS - Overview TAB

The overview tab has 5 sub tabs giving you general information about your

cities, resources ,troops & buildings.

In yellow , the total of all your cities resources are combined.

Same for your troop totals in

yellow for all cities combined.

Step 31: Configure TOOLS - Overview -The Resource sub tab

Gives a lot of info about, upkeep, wilds you have, current boosts etc.

Step 32: Configure TOOLS - Overview -Troop sub tab

Gives the totals, the troops per cities, and the amount of knights assigned to

a city.

Step 33: Configure TOOLS - Overview -Building sub tab

Lists the buildings per city , the levels, the field & wall defenses including

all researches of alchemy lab & Briton workshop.

Step 34: Configure TOOLS - Overview -Info Tab

Gives access to useful links, Crest info, Unit information etc.

Step 35: Configure TOOLS - Train Tab

You have the option to train here manually a batch ( auto training in bot is

also available). Use workers takes workers away from fields in training and makes

them available for training troops. ( no or less production then)

Step 36: Configure TOOLS - March TAB

It’s perfect for re-assigning quickly troops from your AP city to your

ATTACK city

You can also LOOT targets from this tab, don’t forget to check auto

select knight and champ on top.

1 Tick auto select knights, so a knight will be sent out with the attack.

2 Tick select champion, so he will be sent out too in the attack waves

3 If you want you can select the spell, life spell for a Fey city

4 Enter the cords of the target you will be attacking or looting.

5 Here you can select the troops that you want to send to target, all

waves will be identical, this depending of course if you have sufficient

troops.

6 Click ATTACK button to start your wave, wait 2 secs and click again

to launch next wave.

1 2 3

4 6

5

And this is how you can send very quickly, a lot of waves to a target,

faster then you can do manually.

If the lauch of the attack was successful, you will see the attack successful

message

Just don’t forget to unselect the option auto select knights when re-

assigning troops , otherwise you are moving your knights too..( speak

from experience )

Step 37: Configure TOOLS - Alliance TAB

You can list your alliance members here, on name, might, cities, position,

days in position , etc. Giving you results like below.

Providing you with useful information about your members etc.

You can also list your diplomacies, as shown below,

This gives you much more information then the supplied Game tab.

*Note the friendlies have been “removed” as I used my own alliance info. ;)

Pushing that symbol, gives straight access to info on KocMon, of

that alliance.

Another useful option is to activate membership monitor.

Whenever a member of your Alliance, leaves or a member Joins, you get an

in game message. Like this,

Configurable to , every 1 hour, 6, 12, 24 etc.

Step 38: Configure TOOLS - Tournament Tab

Gives you the data about your ranking in a tournament, if a tournament is

active.

And also time remaining in Tournament ( countdown).

Furthermore it gives you the difference ( amount) between every member

listed below and above you. Making it easier to calculate , how much might

you have to put on to overtake the ones above your , or stay ahead of the

persons below you.

Step 39: Configure TOOLS - Wilds Tab

Gives you the the information, which wilds you own , location and what

type & level. You can easily abandon or set defenses.

Step 40: Configure TOOLS - Tower Tab

Normally 1 VC or member that has PC on 24/7 , activates this option.

It will post a report in alliance chat , if a city was scouted or attacked , set

on the minimal troops set in scanner.

Reminder, only 1 person needs to run this in alliance, otherwise you get

double postings of the same reports

Step 41: Configure TOOLS - KNIGHTS TAB

Add quickly Skillpoints to any Knight, of course you should reach for

Knights used on Attack & Marshalls, the CAP of 300 as quickly as possible.

Knights that you assign a role, as Foreman, Alchemist, Steward & Marshall,

should be maxed out.

After that you can assign extra skill points over all 4 roles , making Knights

multifunctional & assignable to any role.

Step 42: Configure TOOLS - Player Tab

You can do 2 things here, look up players, or alliances.

When you type a player this is the basic info you get.

Clicking the 1st option, member details, gives you the details of how many

cities a player has and where they are located. This is useful when a player

has ported away, and you know which city it is they ported. You can check

here ( instantly) to which province it has ported to.

Clicking the 2nd option , Leaderboard, gives you information, about the

players Alliance, What your alliance Diplomacy is towards that alliance, the

last login and if the person is misted. ( In this case the player is misted and

city locations are not revealed)

You can see also the Champions that player has, by clicking view

champions.

Note1 : If the player is misted or under protection, it will not show

champs.

Note2 : If a Player has 1 champ, it will only show 1 champ. Or 2

Champs, 3 Champs or 4 Champs.

The buttons shown here will compare & calculate the TR vs TR. Meaning,

Your TR vs the player you are looking up. You can compare for example if

an opponent uses a TR a lot on defense; if your TR will hold up against

theirs if you will battle that player. Its intelligence gathering, checking a

player out for a period of time to discover weaknesses or else. Comparing

TR’s etc. It’s not in the heat of battle thing. The Monitor button will pull up

the Battle Monitor of Dashboard.

IF a player is NOT Misted, city locations are revealed.

If a city is under Ascension Protection it will tell the time left.

It will show you the cities Factions, Fey, Briton, Druid and the city level.

City Names and the distance to that city ( compared to your city) is given.

Clicking Last login, will give you , as it says, the last login of that player.

( This is not 100% accurate, because you can manipulate your last login as

a player via a small trick if you play on/via Kabam.com. In order to do so ,

you would need to activate in Options in BOT, the following Option.)

This makes you show as offline, and last login becomes inaccurate.

By Clicking the Alliances tab , you can scroll trough the Alliances present

on your domain.

You can look up the members ( unmisted), view map or look that alliance

up on Kocmon. Also your current alliance diplomacy is shown. Beneficial

as well, is that you can easy change a Diplomacy from here too, and certainly

when the Alliance name is very difficult to type via the normal option in

game.

Setting Neutral, Hostile or Friendly , is easy, fast and after the confirmation

is given, the message is sent to the other alliance and your own.

( This option is only available for Officers, VC’s & Chancellor)

Selecting an Alliance and then members, gives you the option to scout all

visible ( thus unmisted) members in that alliance. ( By selecting the all

members option) After Selecting from which of YOUR Cities to scout, and

how many scouts you want to use. You Push the GO button and scouts will

be sent to all selected cities of that Alliance.

If you have a short Refresh time, and the game refreshes ( reloads) then this

above instruction is cancelled. So you have to set refresh at , 1 hour for

example.

This concludes the basics for the Tools tab. Play

with the other items in it. Ask your Alliance for

help if something is unclear.

Step 43: Configure - Throne Room & Champ Organizer. ( TRO)

Click on the blue Throne/Champ tab at the top of the screen.

This opens the organizer.

The Green tabs are for Throne room

The Magenta tabs are for champ

The Blue tabs for general options and info

Goto OPTIONS tab

You can remove tabs in the options tab. Giving you a leaner TRO.

Enable the options you need & want.

This the part in options where you can remove or add tabs as shown on

previous page.

If you play several domains you can import your settings from another

domain.

Select the options you need & want , some are very helpful.

Step 44: Configure TRO – Upgrade Tab

When you are upgrading or enhancing, you can boost / speed up the process with the

selection of speed-ups and boost items like protection stones, lucky tokens etc.

Step 45: Configure TRO –Salvage Tab

Next one along says keep the first XX items. This is how many cards the salvager will

not touch.

The next field is Define the TR items to keep:

I always leave the first drop down box faction as any, no matter what I am looking

for. This maximizes your chances to find a specific thing. The next field is card type.

This is very good for when you are looking for a specific item. You can pick, table,

chair, window etc here. Again, lets leave it as any. The next field is 1X, 2X, 3X,

4X,5X. This simply is the amount of a specific attribute you wish to find. So if we

were looking for 3 lines of defense we would select 3X, if we were looking for 5 lines

of defense we would select 5x, etc etc.

The next field is the attribute you wish to find. There is a BIG list of attributes for you

to chose from. I'll follow with a list of things we should be looking for in a minute.

The next field is either, buff, debuff. 9 times out of 10 we leave this as either, but

sometimes you need to get specific. Buff means positive attributes, things that add to

your own stats, debuff is something that takes away. For example, if we were looking

for life for our troops we would look for life buff; if we were looking to take life from

an opponent, we would look for life debuff.

The last field is slots. This is simply where you want to find an attribute. If you want

to find it line 5, you check only box 5; if you want to find it on lines 3,4, and 5, then

tick those 3 boxes.

Once you have set these up press salvager on at the top of the page. Congrats you are

now, cresting, finding cards, and should have a nice steady supply of Aether stone

coming into your cities.

Step 46: Configure TRO –Repair Tab

Step 47: Configure TRO –Organize Tab

Step 48: Configure TRO –Caps Tab

An easy tab to review the CAPS that are in place in the game for battle stats and peace

stats.

You can quickly view if for example you have reached the cap for upkeep reduction or

construction speed.

As a general note, always choose for General BUFFs and then top of with Specific

BUFFs.

In example, it is far much better to have MARCH SPEED at cap as this is a General

BUFF covering all Marches, thus Marching an attack from A to B, Re-assigning troops,

transports, Scouting, etc.

The specific speeds only cover 1 aspect, thus Attack march speed only will give you a

speed bonus if you March an attack, Scout speed bonus only applies to your scouts,

Re-assigning speed only covers that aspect.

Thus March Speed is better, as you can do more aspects with 1 boost equipped. It is

also easier to reach that cap in cards and adding jewels or replacing jewels to reach that

goal.

Step 49: Configure TRO –Upgrade Tab

Step 50: Configure TRO –Salvage Tab

Salvaging is setting RULES for items you want to KEEP or were looking

for, in this case for Champ items. It works the same as you saw earlier for

TR items

Step 51: Configure TRO –Organize Tab

Step 52: Configure TRO –Preview Tab

Step 53: Configure TRO –Log Tab

The LOG tab keeps track of all Items that have been upgraded and at which

time. Can/could be useful info for you , or not.

The option is there for you to use or not.

Step 54: Configure TRO –Jewels Tab

The Jewels Tab allows you to see your inventory on Jewels ( all levels) and

you can specify your parameter, like only looking for Bright or only look

for Subdued, or look for ALL.

Gives you a summary what you have and the quantities.

Pls Note, The MAXIMUM jewels you can hold per Jewel Stat is 150.

Everything over that is not registered

Realistically, you want BRIGHT jewels on ALL Cards , with SUBDUED

on 2nd place till you can replace those by BRIGHT too. It’s also good to

check if you have BRIGHT jewels on all cards. Sometimes people forget

that they used lower jewels early on in the game and never rectified that to

BRIGHT jewels. Check?

Step 55: Configure TRO –

Throne & Champ Presets (Tips& Tricks)

In order to do anything with your presets you must save and ideally name

them.

To do this click on Throne/Champ and select the green Presets button.

What to do here:

– Name and Save your presets (Naming is optional, but has it's benefits)

– When you're not naming your presets just click “Save all Preset Tags” or do so

after Naming them

– Show Might on posts can be disabled/enabled at will

– Show Preset Name on Posts can be disabled/enabled at will

Copying Presets:

To copy a preset from one slot to another, the preset MUST be saved

To do this open Throne/Champ and select the Preview button

Before you copy a TR it is recommended to stop your raids/cresting runs

and switch to the empty TR

What do to here:

– Switch to the (empty)slot you wish to copy an existing preset to

– Use the load TR Preset to select the preset/slot you wish to copy

(Pick slot before you click the “Load TR preview button)

– Use the Copy To “Preset Tag” to select the slot you wish to copy the

loaded Preset(Pick slot before clicking Copy To button)

– Click the Equip Now button and wait a few minutes while all cards

are being equipped

– You will get confirmation when done

Breaking Throne Room and Champ items:

For this we need to go back to the Presets tab (Green for TR , Pink for

Champion)

Scroll down the page till you see this:

Tagged Presets: Cards that are automatically “tagged” by saving the

preset

Regular Tagged: Card that are manually “tagged” inside the throne

room (click the card and click Tag Item, a good card to tag is your

increased city value advisor for ascension purposes)

Break Equipped Throne Only , you can break a single preset this way

but be cautioned, if you use a card in multiple presets, it will be

unequipped from any other set it was in, be sure to have alternative

cards

Break Tagged Preset Only: I'm not quite sure on this, I've not used the

feature as of yet

Break (Insert desired might you wish to lose) Throne Might will break

any card that is not equipped or tagged until it reaches the set amount.

Special Thanks To Mike Luijer for contributing step 55

: Sharing is knowledge, and a lot of players are not sharing.

Yes it gives you and edge, or advantage, but it leaves also many people

clueless. The objective of these tutorials, is to teach, learn, educate players

so ALL players have a better under understanding of the game. The more

players participate, the better the overall experience is for all players. More

attacking and defending means “lively” domains full of activity.