GUJARAT WATER SUPPLY SEWERAGE BOARD …parthvalves.com 31/01/2019 4 M/s. Reliance Industries Ltd.,...

GUJARAT WATER SUPPLY & SEWERAGE BOARD

Govt. PSUs as Approved Vendors of GWSSB for Civil Materials

All the products (related to water supply & Sewerage schemes) manufactured by Government PSUs shall be accepted as Approved Vendors.

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

PE- 80 up to 315 mm up to PN -10

PE-100 up to 315 mm up to PN -10

90 to 315 mm & 355 to 1000 mm

PN - 2.5

50 to 315 mm & 355 to 1000 mm

PN - 4

40 to 315 mm & 355 to 1000 mm

PN - 6

32 to 110 mm & 125 to 180 mm &

200 to 710 mmPN -8

32 to 110 mm & 125 to 315 mm &

355 to 630 mmPN -10

25 to 110 mm & 200 to 315 mm

PN -12.5

20 to 110 mm PN - 1650 to 315 mm & 355 to 1000 mm

PN - 6

40 to 180 mm & 200 to 900 mm

PN -8

32 to 315 mm & 355 to 800 mm

PN -10

25 to 110 mm & 200 to 315 mm

PN -12.5

20 to 110 mm PN - 16

90 to 1000 mm PN - 2.550 to 1000 mm PN - 432 to 1000 mm PN - 632 to 180 mm PN -820 to 450 mm PN -1020 to 180 mm PN -12.5

50 to 1000 mm PN - 640 to 315 mm PN -8

32 to 500 mm & 800 mm

PN -10

20 to 180 mm & 200 to 500 mm

PN - 16

PE-80 20 to 400 mmPN - 2.5 to PN

16

PE-100 20 to 400 mmPN - 6 to

PN 16

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of HDPE (PE-80 & 100) Pipes (IS-4984) with ISI mark as per

Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval

Valid up to Date

Remarks

2M/s. Purma Plast Pvt.

Ltd., Bhiwadi

B-494, RICCO Industrial Area, Bhiwadi, Dist. Alwar, Rajasthan-301019

[email protected]

PE-80

31/01/2019

PE-100

1M/s. Aerochem Piping Pvt. Ltd., Ahmedabad

Plot No. 258, Road No. 1/B, Phase-I, Kathwada, GIDC, Ahmedabad-382430

[email protected]@parthvalves.com

31/01/2019

4M/s. Reliance Industries

Ltd., Hazira

Reliance Industries Ltd, Relpipe Plant, Village-Mora, Post-Bhatha, Hazira,

[email protected]

31/01/2019

3

M/s. Emtelle India Limited, Sanand

(Formerly known as M/s. Parixit Industries LTd.,

Sanand)

Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,

Ahmedabad - 382 [email protected]

[email protected]

PE-80

31/01/2019

Name changed

vide letter no. 28

dtd.12-2-2016

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16

50 to 1000 mm PN - 640 to 800 mm PN -832 to 800 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 110 mm PN -12.590 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 180 mm PN -12.520 to 180 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 180 mm PN -12.520 to 180 mm PN - 16

90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 710 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16

50 to 1000 mm PN - 640 to 900 mm PN -832 to 800 mm PN -1025 to 630 mm PN -12.520 to 500 mm PN - 16

PE- 80 40 to 140 mm PN - 6PE-100 50 to 180 mm PN - 6PE-100 32 to 160 mm PN -10

6M/s Krishna Plastics,

Rajkot

Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,

[email protected][email protected]

PE-80

31/01/2019

PE-100

PE-100

5M/s Time technoplast

Ltd. Silvasa

Survey No. 326/1/1 (Part) & 328, Unit-2, Dhodharoada, Village-Velugam,

Silavassa- U.T. of D & N. H. -396230

[email protected]

PE-80

31/01/2019

9M/s. Mayfair Polymers Pvt. Ltd., Himmatnagar

Mayfair Compound, N.H.No.8, Himmatnagar - 383 001

[email protected]/12/2019 -

PE-100

7M/s kelvin Plastics Private Ltd.,Rajkot

Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27

(Old-8B), Bhunava, Gondal, Rajkot-360311

[email protected]

PE-80

31/01/2019

PE-100

8M/s. Jain Irrigation

Systems Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,

[email protected]

[email protected]

PE-80

31/01/2019

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

90 to 315 mm (Except 125 mm)

PN - 2.5


PN - 4


PN - 6


PN -8


PN -10


PN - 6


PN -8


PN -10

200 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1020 to 180 mm PN -12.5

110 to 180 mm PN - 1650 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1025 to 250 mm PN -12.5110 to 180 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 500 mm PN - 640 to 315 mm PN -825 to 315 mm PN -1025 to 200 mm PN -12.550 to 630 mm PN - 640 to 315 mm PN -832 to 630 mm PN -1025 to 200 mm PN -12.5

125 to 200 mm PN - 2.5125 to 200 mm PN - 440 to 200 mm PN - 632 to 200 mm PN -825 to 200 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 200 mm PN - 640 to 200 mm PN -832 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16

-

PE-100

11M/s. Nimbus Pipes Ltd.,

Jaipur

SP2-123/123A, RIICO Industrial Area, Manda Near Kaladera, Chomu, Jaipur-

302023, [email protected]

PE-80

31/12/2019 -

PE-100

10M/s. Kothari Agritech Pvt.

Ltd., Solapur

Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-

413 213, [email protected]@kotharipipes.co.in

PE-80

31/12/2019

-

PE-100

13M/s. Dutron Polymers

Ltd., Kheda

Bolck No. 642, N.H. 8, At-Hariyala, Kheda

[email protected]

PE-80

31/12/2019 -

PE-100

12M/s. Kisan Moulding Ltd.,

Silavasa

108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli,

[email protected]

[email protected]@kisangroup.com

PE-80

31/12/2019

-

PE-100

14M/s. Dolphin Poly Plast

pvt. Ltd., Rajkot

Plot No. G/1/C, Near Gate no. 2, Ta:- Lodhika, GIDC Metoda, Rajkot-360021

[email protected]@dolphinpipe.com

PE- 80

31/12/2019

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

90 to 140 mm & 160 to 400 mm

PN - 2.5

50 to 140 mm & 160 to 400 mm

PN - 4

40 to 400 mm PN - 632 to 400 mm PN -825 to 400 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 400 mm PN - 640 to 400 mm PN -832 to 400 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1050 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1040 to 200 mm PN - 632 to 110 mm PN -832 to 110 mm PN -1032 to 90 mm PN -12.550 to 90 mm PN - 16

50 to 200 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1032 to 90 mm PN -12.5

50 to 90 mm PN - 16

500, 630 & 710 mm

PN - 2.5

50 to 110 mm, 355 to 400 mm, 500, 630 & 710

mm

PN - 4

40 to 400 mm, 450, 500, 630 &

710 mm PN - 6

32 to 110 mm, 355 to 400 mm, 450, 500, & 630

mm

PN -8

25, 32 to 200 mm (Except 125 mm), 450, 500, & 630

mm

PN -10

20 to 180 mm PN -12.550 to 500 mm &

630, 710 mmPN - 6

40 to 500 mm & 630, 710 mm

PN -8

32 to 500 mm & 630, 710 mm

PN -10

25 to 400 mm PN -12.5

15M/s. Kisan Irrigation &

Infrastructure ltd., Mumbai

Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 [email protected]

[email protected]@kisanirrigation.com

PE- 80

31/12/2019 -

PE-100

-

PE-100

18M/s. Kriti Industries (India) Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP

[email protected]

PE- 80

31/12/2019 -

PE-100

16M/s. Meghdoot Polypipes, Jaipur

G-1-198, Road No. 10, Bindayaka Industrial Area, Phase-II, Jaipur-302012

[email protected]

PE- 80

31/12/2019

17M/s. Nataraj Polyplast

Pvt. Ltd., Rajkot(DELETED)

Survey no-168, Plot no. -23, Near Railway Over Bridge, Dhebar Road (South), Kothariya , Rajkot-360002

[email protected]

PE-80

31-12-2017

DELETED due to

shifting of plant at different

location as informed by Agency vide letter dtd. 15-5-2017

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

90 to 450 mm PN - 2.550 to 450 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 450 mm PN -12.520 to 450 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 400 mm PN -12.520 to 315 mm PN - 1650 to 630 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 400 mm PN -12.520 to 315 mm PN - 1640 to 315 mm PN - 6

125 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1090 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1063 to 110 mm PN - 2.563 to 110 mm PN - 463 to 125 mm PN - 6

125 mm PN -8125 mm PN -10

20 to 125 mm PN -12.520 to 125 mm PN - 1663 to 125 mm PN - 6

125 mm PN -8125 mm PN -10

20 to 125 mm PN -12.520 to 125 mm PN - 16

20M/s. Noble Polymers,

Silvassa

Sr. No. 132/1/1/4, 96/2/2 & 95/1/2, B/H. Prince Pipes, Village :- Athal,

Silvassa-396230, UT of Dadra & Nagar Haveli.

[email protected]

PE-80

31/12/2019

-

PE -100

19M/s. Rungta Irrigation

Ltd., Ghaziabad

C-165, Bulandshahar Road, Industrial Area, Ghaziabad (U.P.)

[email protected]@rungtairrigation.in

PE-80

31-12-2017

-

PE-100

21M/s. Elegant Polymers,

Rajkot

Elegant Polymers, At-Navagam (Bamanbore), Taluka:- Chotila,

[email protected]

PE- 80

31/12/2018 -

PE-100

22M/s. Signet Industries

Ltd., Dhar (MP)

Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar,

Madhya [email protected]

[email protected]

PE-80

31/12/2018 -

PE-100

23M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,

Talod, [email protected]

PE-80

31/12/2018 -

PE-100

24M/s. Vishakha Irrigation

Pvt. Ltd., Ahmedabad

Block No. 792, Nr. Monik Ind. Sadaspur Road, Village:- Moti Bhoyan,

Kalol, [email protected]

[email protected]

PE-80

31/12/2018 -

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

90 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 180 mm PN -12.550 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 180 mm PN -12.540 to 315 mm PN - 632 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN -1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

125 to 315 mm PN - 2.5125 to 315 mm PN - 6125 to 315 mm PN -8125 to 315 mm PN -1020 to 315 mm PN -12.520 to 315 mm PN -16200 to 315 mm PN - 6200 to 315 mm PN -8200 to 315 mm PN -10125 to 315 mm PN -12.520 to 315 mm PN -1690 to 400 mm PN - 2.550 to 315 mm PN - 440 to 400 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 400 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

125 to 450 mm PN - 2.550 to 450 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 450 mm PN -12.520 to 400 mm PN - 1690 to 180 mm PN - 2.540 to 180 mm PN - 432 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -10

50 to 110 mm & 200 to 400 mm

PN - 6

40 to 110 mm & 200 to 400 mm

PN -8

32 to 110 mm & 200 to 400 mm

PN -10

20 to 50 mm PN -12.520 to 50 mm PN - 16

30/06/2019

30/06/2019

-

-

PE-100

PE-80 Survey no.3, Plot no. 76-79, B/h Kisan Dhydration, NH-27, Village-Bhojpara,

Taluka- Gondal, [email protected]

M/s. Capital Polyplast (Guj.) Pvt. Ltd., Rajkot

25

PE-80

PE-100

Plot no. G-922, Lodhika GIDC, Gate no.3, Kishan Gate Main Road, Kalavad

Road, Metoda, Rajkot-360 021

[email protected]

M/s. Khyati Polymers, Rajkot

26

PE-100

39-44 A, Industrial Area, Ratlam-457001, Madhya [email protected]

M/s. Kataria Plastics Pvt. Ltd., Ratlam

29

PE-80

PE-100

30M/s. Miraj Pipes &

Fittings Pvt. Ltd., Udaipur

Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan

[email protected]

27M/s Krishna Plastics,

Rajkot

Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,


PE-80

30/06/2019 -

PE-100

30/11/2019

28M/s. Jet Fibre India Pvt.

Ltd., Ahmedabad

Shed No. 658, Suvey No. 909/1 & 2, Pursottam farm, (Bhudarpura) Mahij,

Kheda-387 [email protected],[email protected]

PE-80

30/11/2019

PE-100

PE-80

30/11/2019

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

90 to 315 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 500 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 180 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 6

125 to 200 mm PN -8125 to 200 mm PN -10125 to 200 mm PN -12.5125 to 200 mm PN - 1650 to 315 mm PN - 6

125 to 200 mm PN -8125 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16

125 to 180 mm PN - 2.540 to 110 mm PN - 632 to 180 mm PN -825 to 110 mm PN -1020 to 110 mm PN -12.5

125 to 180 mm PN - 640 to 180 mm PN -832 to 110 mm PN -10

PE-80

PE-100

R.S. No. 13/2P1, Plot no. 4, NH 27, Opp. Sadak Pipaliya Gate, Village:- Sadak Pipaliya, Ta. Gondal, [email protected]

M/s. Balson Polyplast Pvt. Ltd., Rajkot

36 06/03/2021

PE-100

PE-80

30/06/202032M/s. Dinesh Irrigation

Pvt. Ltd., Jaipur

86B & 86B-II, Jhotwara Industrial Area, Jaipur-302012

[email protected]@dineshirrigation.com

PE-80

PE-80

30/11/2019

PE-100

31M/s. Mohit Polytech Pvt.

Ltd., Jaipur

F-139, Road no. 6, RIICO Industrial Area, Bindayaka, [email protected]@[email protected]

PE-80

PE-100

30/06/202098, Bahadarpur Road, Burhanpur,

Madhya [email protected]

M/s. Texmo Pipes & Products Ltd., Burhanpur

(MP)35

PE-100

30/06/2020

SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., Jaipur-302022

[email protected]@tijaria-pipes.com

[email protected]

M/s. Tijaria Polypipes Limited, Jaipur

33

34M/s. Sagar Polytechnik

Ltd., Chotila (Surendranagar)

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,

[email protected]

[email protected]

PE-80

PE-100

30/06/2020

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

Remarks

25 to 110 mm PN -12.520 to 110 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 450 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 800 mm PN - 2.550 to 800 mm PN - 440 to 800 mm PN - 6

32 to 500 mm & 630 mm

PN -8

25 to 500 mm PN -1020 to 315 mm PN -12.550 to 800 mm PN - 640 to 800 mm PN -8

32 to 500 mm, 630 mm & 710

mmPN -10

25 to 315 mm PN -12.520 to 315 mm PN - 16

110 mm PN - 2.5110 mm PN - 4

40 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1090 to 315 mm PN - 2.550 to 315 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1640 to 315 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1025 to 110 mm PN -12.520 to 110 mm PN - 16

PE-80

06/03/2021

PE-100

41M/s. Sarovar Polymers

Pvt. Ltd., Rajkot

27/28, Atul Industrial Estate, Opp. Jyoti CNC & Pathak School, B/h. Akshar

Weight Bridge, Kalawad Road, Metoda GIDC, Rajkot-360021

[email protected]

PE-80

06/03/2021

PE-100

39M/s. Duke Pipes Pvt. Ltd.,

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,

[email protected]@dukepipes.com

40M/s. Polysil Irrigation

Systems Pvt. Ltd., Silvassa

Survey No. 137/1, Madhuban Road, Village:- Karad, Silvassa-396 230,

D & [email protected]


PE-80

06/03/2021

PE-100

06/03/2021

PE-80

PE-100

Survey no. 146/P2, Behind Raymond Ltd., At & Po. Motiwada, Taluka:-

Killapardi, District:- Valsad -396125, Gujarat

[email protected]@sangir.in

M/s. Sangir Plastics Pvt. Ltd., Valsad

38

PE-80

PE-100

UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli,

[email protected]

M/s. Parvati Agro Plast, Sangli (Maharashtra)

37 06/03/2021

Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.

Size (mm) Class1 2 3 5 6 7 8

75 to 500 mm SN : 4 & 8

600 to 1000 mm SN: 2, 4, 6 & 8

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of DWC (HDPE) Pipes (IS-16098 Part -2) with ISI mark as per

Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)Sr. No.


Valid up to Remarks


1M/s. Alom Poly

Extrusions Ltd., Kolkata

Banganagar, Falta, 24 Parganas (South), West Bengal

[email protected]@alom.in

[email protected]

30/06/2020

Size (mm) Class1 2 3 4 5 6 7

63 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 110 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm263 to 110 mm Class II- 4.0 kg/cm263 to 250 mm Class III- 6.0 kg/cm263 to 250 mm Class IV- 8.0 kg/cm263 to 250 mm Class V- 10.0 kg/cm2

3

M/s. Emtelle India Limited, Sanand (Formerly known as M/s. Parixit Industries LTd.,

Sanand)

Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand, Ahmedabad - 382 [email protected]

[email protected]

63 to 315 mm Class III- 6.0 kg/cm2 31/01/2019

Name changed

vide letter no. 28

dtd.12-2-2016

63 to 315 mm Class II- 4.0 kg/cm2

40 to 315 mm Class III- 6.0 kg/cm2

25 to 315 mm Class IV- 8.0 kg/cm2

63 to 315 mm Class V- 10.0 kg/cm2



6M/s. Jain Irrigation Systems

Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001, Maharastra

[email protected]@jains.com

63 to 630 mm Class II to VI

( 4.0 to 12.5 kg/cm2)31/01/2019


Class II- 4.0 kg/cm2


Class III- 6.0 kg/cm2


Class V- 10.0 kg/cm2





7M/s. Mayfair Polymers Pvt.

Ltd., Himmatnagar

Mayfair Compound, N.H.No.8, Himmatnagar - 383 001

[email protected]@gmai.com

31/12/2019 -

8M/s. Kisan Moulding Ltd.,

Silavasa

108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli, Silvassa-396230

[email protected]@gmail.com

[email protected]

31/12/2019 -

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Ringfit UPVC Pipes (IS-4985) with ISI mark as per Vendor Selection

Report submitted by Different TPI (As on dt. 4-4-2018)Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval

Valid up to Remarks

1The supreme Industries Ltd.,

At: Gadegaon, PO: Neri. Dist: [email protected]

31/01/2019M/s. The Supreme

Industries Ltd., Jalgaon

4 M/s. Polysil Pipes, Silvassa

Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi, Silvassa, D & N.H.

[email protected]@tufropes.com


31/01/2019

2M/s. Super Industrial Corp.,

PatialaC-67, Focal Point, Patiala-147004

[email protected]/01/2019

5 M/s Sumo Polyplast Pvt.Ltd.Plot no. G-925, GIDC Lodhika, Kishan Gate,

Kalawad Road, At. Metoda, [email protected]

31/01/2019

Size (mm) Class1 2 3 4 5 6 7

Sr. No.


Valid up to Remarks

9M/s. Dutron Polymers Ltd.,

KhedaBolck No. 642, N.H. 8, At-Hariyala, Kheda

[email protected] to 315 mm Class III- 6.0 kg/cm2 31/12/2019 -


Class I- 2.5 kg/cm2

63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm2


Class IV- 8.0 kg/cm2












63 to 315 mm Class V- 10.0 kg/cm2140 to 315 mm Class VI- 12.5 kg/cm2

13M/s. AKG Extrusion Pvt. Ltd.,

NoidaB-39, Sector-80, Noida, Uttar Pradesh-201305

[email protected] to 315 mm Class III- 6.0 kg/cm2 31-12-2017 -



15M/s. Stuti Pipes Pvt. Ltd.,

Sabarkantha

Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij, Dist.:- Sabarkantha-

[email protected]


Class III- 6.0 kg/cm2 31/12/2018 -










14M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)

Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215


16M/s. Signet Industries Ltd.,

Dhar (MP)

Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar, Madhya

[email protected]

[email protected]

31/12/2018 -

12M/s. Kriti Industries (India)

Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, [email protected]

31/12/2019 -

10M/s. Kothari Agritech Pvt.

Ltd., Solapur

Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-413 213,

[email protected]@kotharipipes.co.in

31/12/2019 -


Infrastructure ltd., Mumbai

Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 775


[email protected]

31/12/2019 -

17M/s. Vinayak Polypipes Pvt.

Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol, Talod, Sabarkantha


Size (mm) Class1 2 3 4 5 6 7

Sr. No.


Valid up to Remarks

18M/s. Swastik Krushi Polypipes Pvt. LTD.,

Dahegam

Plot No. 314, Zak Industrial Area, Vahelal Road, Village- Zak, Post- Paradhol, Dahegam,

[email protected]@swastikkrushi.com


Class III- 6.0 kg/cm2 31/12/2018 -





63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2







90 to 315 mm Class I- 2.5 kg/cm2125 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm2

125 to 180 mm Class IV- 8.0 kg/cm290 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2










30/06/2019Survey no.257, Plot No.23 to 28, NH-27,

Shapar (Veraval), [email protected]

M/s. Captain Pipes Ltd., Rajkot

21

23

22M/s. Kataria Plastics Pvt.

Ltd., Ratlam

39-44 A, Industrial Area, Ratlam-457001, Madhya Pradesh


M/s. Miraj Pipes & Fittings Pvt. Ltd., Udaipur

Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan

[email protected]

30/06/2019 -

Survey No.149/1, Dholka-Kheda Road, Opp. GIDC Estate, Dholka-382225, Dist. Ahmedabad

[email protected]@astralcpvc.com

[email protected]

M/s. Astral Polytechnik Ltd., Ahmedabad

19

20M/s. Godavari Pipes Pvt.

Ltd., Rajkot

Survey No. 26 & 27, Plot no.6 To 10, N.H.8-B, Shapar (Veraval), Dist. Rajkot.


30/11/201924M/s. Borana Industries,

Jodhpur

E-39, M.I.A. Basni 2nd Phase, Jodhpur, Rajasthan

[email protected]

30/11/2019

25M/s. Duke Plasto Tech.Pvt.

Ltd., Palanpur

N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat


30/06/2020

Rajkot Ahmedabad N.H. No. 8-B, Wankaner Chowkdi, Survey no.552, Opp. Kuvadava High

School, Kuvadava, Rajkot-360 [email protected]

M/s. Idol Plasto Pvt. Ltd., Rajkot

26

30/06/202027 M/s. Kamdhenu Pipe, Rajkot

Near Murakhda's Patiya, At- Murakhda, Taluka:- Upleta, Rajkot

[email protected]@kamdhenupipe.com

28M/s. Prince Pipes & Fittings

Pvt. Ltd., Dadra & Nagar Haveli

Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra, Silvassa, D & N.H. -

396 [email protected]@princepipes.com

30/06/2020

30/06/202029M/s. Elegant Polymers,

Rajkot

6, Rajputpara, Lohana Boarding, Rajkot-360 001


Size (mm) Class1 2 3 4 5 6 7

Sr. No.


Valid up to Remarks







25 to 180 mm Class VI- 12.5 kg/cm2

90 to 180 mm Class I- 2.5 kg/cm263 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm2

90 to 315 mm Class I- 2.5 kg/cm2











36M/s. Apollo Pipes Ltd., Uttar

Pradesh

Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar,

Uttar [email protected]

63 to 315 mm Class III- 6.0 kg/cm2 06/03/2021










Class VI- 12.5 kg/cm2





90 to 250 mm Class II- 4.0 kg/cm290 to 200 mm (Excluding 180

mm)Class III- 6.0 kg/cm2





06/03/2021

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila, [email protected]

[email protected]

M/s. Sagar Polytechnik Ltd., Rajkot

40

Block No. 792, Near Monik Industries, Sadaspur road, Vill. Moti Bhoyan, Tal. Kalol,

Dist. [email protected]@vishakhairrigation.com

M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad

38

39M/s. Guru Polyplast,

Palanpur

4/11 & 4/12, GIDC Chandisar, Palanpur, Banaskantha-385510


37M/s. Parvati Agro Plast,

Sangli (Maharashtra)

UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli, Maharshtra


06/03/2021

06/03/2021

Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27 (Old-8B),

Bhunava, Gondal, [email protected]

M/s kelvin Plastics Private Ltd.,Rajkot

34


Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001, Banaskantha


06/03/2021


30/06/202030M/s. Skipper Limited,

Ahmedabad

Survey No. 823, Village: Rajoda, Ahmedabad-Rajkot Highway, Taluka: Bavla, Ahmedabad-

[email protected]@skipperlimited.com

33M/s. Aron Pipes Pvt. Ltd.,

Surat

Block No. 187, Plot No. 1 to 21, Kim-Mandvi Highway, Kim, [email protected]

[email protected]

30/06/2020

31M/s. Tijaria Polypipes

Limited, Jaipur

SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., [email protected]

[email protected]@tijaria-pipes.com

30/06/2020

32M/s. Texmo Pipes &

Products Ltd., Burhanpur (MP)

98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331


Size (mm) (NM) Class

1 2 3 4 5 6 740 to 200 mm RMS40 to 200 mm CM

150 to 200 mm CS200 to 400 mm CD

40 to 250 mm CM

150 to 250 mm CS

150 to 400 mm CS 40 to 400 mm CM40 to 400 mm RMS

250 to 400 mm PMS115 to 400 mm CD115 to 175 mm RDS

125, 175, 200, 250 mm

CM

175, 200, 250 mm CS

100 to 150 mm , 175 mm & 200 mm

CM

150 mm, 175 mm & 200 mm

CS

125 mm, 150 mm & 200 mm

RS

100, 125, 150, 175, 200 & 250 mm

CM

150 , 175, 200 & 250 mm

CS

125, 150, 175, 200 mm

CM

150, 175, 200, 250 mm

CS

100, 115, 125, 150, 175, 200, 250 mm

CM

150, 175, 200, 250 mm

CS

150 mm to 250 mm CS40 mm to 300 mm CM

100 mm to 300 mm CD40 mm to 200 mm RMS

150 mm to 400 mm CS

40 mm to 400 mm CM

7M/s. Stuti Pipes Pvt. Ltd.,

Sabarkantha

Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij, Dist.:-

[email protected]

31/12/2018 -

6M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)

Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215


5M/s. Kriti Industries (India) Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP


4M/s. Dutron Polymers

Ltd., Kheda

Bolck No. 642, N.H. 8, At-Hariyala, Kheda


3M/s. Jain Irrigation

Systems Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,

[email protected]

[email protected]

31/01/2019

1M/s. Super Industrial

Corp., PatialaC-67, Focal Point, Patiala-147004


2M/s. Polysil Pipes,

Silvassa

Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi, Silvassa, D &

[email protected]


31/01/2019

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of uPVC Screen & Casing Pipes (IS-12818) with ISI

mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address

Approved Size & Class Approval Valid up to

Date Remarks

8M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,

Talod, [email protected]

31/12/2018 -

9M/s. Skipper Limited,

Kolkata

Ububeria Unit, N.H. No.-6, Village:- Madhabpur, PO:- Mahishrekha, PS:-

Uluberia, Howrah-711 [email protected]

30/06/2019 -

30/06/2019Survey no.257, Plot No.23 to 28, NH-27,

Shapar (Veraval), [email protected]

M/s. Captain Pipes Ltd., Rajkot

10 -

Size (mm) (NM) Class

1 2 3 4 5 6 7

Sr. No.



Date Remarks

150 to 350 mm CS

100 to 350 mm CM

150 to 300 mm CS40 to 300 mm CM

100 to 400 mm CD250 to 300 mm PMS100 to 300 mm RMS

40 to 250 mm CM

150 to 250 mm CS

40 to 250 mm RS

150 to 200 mm CS

100 to 250 mm CM

100 to 250 mm RS

150 to 250 mm CS

40 to 250 mm CM

175 to 300 mm CS100 to 300 mm CM100 to 300 mm CD200 to 300 mm PMS200 to 300 mm PDS100 to 175 mm RMS100 to 175 mm RDS150 to 250 mm CS40 to 250 mm

(Except 115 mm)CM


RMS

17M/s. Apollo Pipes Ltd.,

Uttar Pradesh

Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam

Budh Nagar, Uttar [email protected]

06/03/2021


Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,


06/03/2021


11M/s. Sagar Polytechnik

Ltd., Rajkot

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,

[email protected]

[email protected]

30/11/2019

12M/s. Duke Plasto

Tech.Pvt. Ltd., Palanpur

N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat


M/s. Prince Pipes & Fittings Pvt. Ltd., Dadra

& Nagar Haveli

Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra, Silvassa, D &

N.H. - 396 [email protected]@princepipes.com

30/06/202013

M/s. Texmo Pipes & Products Ltd., Burhanpur

(MP)

98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331



Infrastructure Ltd., Dhar (MP)

Factory:- Unit II, Plot No. 91-110, Sector no. 3, Pithampur, Dhar, Madhya

[email protected]

[email protected]@kisanirrigation.com

30/06/2020

1 2 3 4 5 6

1M/s. Samshi Pipe

Industries Ltd., Vadodara

Plot No. E-9, Savli GIDC Estate, Manjusar, Savli, Vadodara-391165

hitesh [email protected]

MS Helical Seam Submerge Arc Welded Pipe :-Size range 18' (457 mm) to 100" (2540 mm) and thickness 5 mm to 20 mm in length 6 mtr to 12 mtr.

31/01/2017

2M/s. Bhushan Steel Ltd.,

Raigadh

Nigan-savroli, Isamba Phata khopoli, Tal;- Khalapur, Dist:- Raigad, Maharastra-

[email protected]

ERW Pipes of range:- Dia- 3" to 8" (80 NB to 200 NB), 8" to 24" maximum thickness up to 12.7 mm.

31/01/2019

3M/s. Ratnamani Metals &

Tubes Ltd., Chhatral

Plot no. 3306 to 3309, GIDC Estate, Chhatral Phase IV, Ahmedabad-Mehasana

Highway, Chhatral, kadi, Mehasana-382729

[email protected]

OD:- 355.6 mm to 1219 mm (14" to 48" N.B.)Wall thickness:- 5 mm to 28 mm

31/01/2019

4M/s. Ratnamani Metals &

Tubes Ltd., Kutch

Survey No. 474, Bhimasar road, Vill. Bhimasar, Tal. Anjar, Dist. Kutch -370201

[email protected]

OD:- 457 mm to 2540 mm (18" to 100" )Wall thickness:- 5 mm to 20 mm

31/01/2019

5M/s. Jindal Saw Limited,

Kutch

Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road,

Tal: Mundra, Dist: Kutch-370415

[email protected]@jindalsaw.com

OD:- 457.2 mm to 2540 mm (18" to 100" )Wall thickness:- 6 mm to 25 mm

31/01/2019

6M/s. Asian Mills Pvt. Ltd.,

Ahmedabad

Asian Mills PVt. Ltd., Plot NO. 1, Phase-1, GIDC Chhatral, Kalol, Mehsana

[email protected]

(1) IS: 1239 (Part-1)2004:- 15 mm to 80 mm Nominal Bore, Light, Medium, Heavy Class and 100 mm to 150 mm Nominal Bore Medium & Heavy Class, 100 mm NB Light Class Black plain end and screwed & socketed pipes.(2) IS : 3589-2001:- 168.3 mm OD to 508 mm OD (Except 244.5 mm OD) Blakc plain end and Beveled end Pipes Gr.Fe:330 & Fe:410(3) IS:4270-2001: 100 mm NB to 400 mm NB (Except 225 mm NB) Black Beveled End pipes Gr. Fe:410

31/01/2019

7M/s. Welspun corp ltd.,

Dahej (Bharuch)

Unit-I (Dahej Plant), Welspun Corp. Ltd., Village: Jolva & vadadla, Tal: Vagra, Dahej

Road, Bharuch, Gujarat-392 130

[email protected]

(1) M.S. Pipe from size :-457 mm to 1930 mm & thickness 5 mm to 14 mm(2) 3LPE/LPP coating for pipe size:- 4 inch to 64 inch OD(3) External coating FBE/CFBE for pipe size:- 4 inch to 64 inch OD(4) Internal liquid Epoxy for pipe size:- 20 inch to 64 inch ID

31/01/2019

8 M/s. PSL Ltd., Anjar

Village varsana, Survey no. 39,40,42, Bhachau - Bhimasha road/ Nr.

Gandhidham Varsana, taluka- Anjar, Kutch-370240

[email protected]

(1) Helical Seam Submerged Arc Welded Pipes:- ( IS 3589; Grade 330 & 410 IS 5504);-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 5 mm to 25 mm(2) 3LPE, 3LPP, CWC, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, ICP, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 2 mm to 50 mm

31/01/2019

Approved Size & Thickness

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of MILD STEEL (M.S.) Pipes (IS 3589) with ISI mark as per Vendor

Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail AddressApproval

Valid up to Date

Remarks

1 2 3 4 5 6

Approved Size & Thickness Sr. No.

Name of Agency Adress/E-mail AddressApproval

Valid up to Date

Remarks

9M/s. Welspun Corp Ltd, Anjar

Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar,

Kutch-370110(1) [email protected]

(2) Sanjay_raghavan @ welspun.com

(1) Helical Seam Submerged Arc Welded Pipes:- (a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 4 mm to 25 mm(2) 3LPE, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 0.1 mm to 50 mm

31/01/2019

10M/s. Essar Steel India Ltd.,

Hazira

Essar Steel India Ltd., (pipe mill Division), 27th Kms Surat Hazira road, Surat, Gujarat-

[email protected]

[email protected]

406 mm to 2540 mm in thickness 6 to 25.4 mm WT. 31/12/2019 -

11

M/s. Surya Roshni Limited, Kutch

(Formerly Known as M/s. Surya Global steel tubes

Ltd.)

Survey No.188, Anjar-Mundra highway, Village:-Bhuvad, Kutch-370130


[email protected]

(A) MS ERW pipe:- 15 to 400 mm NB, up to 12.70 mm WT, Grade Fe 330 & 410 (B) MS Spiral Welded pipe:- From 457.2 mm to 2540 mm OD, up to 25 mm WT, Grade Fe 330 & 410

31/12/2019

Name Changed

vide letter No.218

dtd. 4-4-2018

12 M/s. SAIL Bokaro Steel City, Bokaro, Jharkhand

M.S. pipe of IS 3589:-2001 (ISI mark) 406 mm to 1626mm in thickness 6 to 25.4 mm WT.

31/12/2019Recommended by

TCEL

13M/s. Riddhi Steel &

Tubes (P) Ltd., Ahmedabad

83-84, Village- Piplaj, Pirana Road, Ahmedabad-382 427

[email protected]

(1) M.S. ERW Steel Pipe conforms IS :1239: Part-1:2004- (Black & Galvanised) With ISI Mark - Size :- 15 to 150 mm NB(2) M.S. ERW Steel Pipe conforms IS :3589:2001- (Black ) With ISI Mark - Size :- 150 to 300 mm NB

30/06/2019 -

14M/s. Surindra Engineering Company Limited, Gandhinagar

Factory;- Block No.1517, Village;- Moti Bhoyan, Kalol-Khatraj Road, Kalol,

[email protected]

[email protected]

M.S. Pipe as per IS 3589-2001(1) Spiral Saw Pipes:- OD 16 inch to 100 inch with pipe thickness from 5 mm to 16 mm(2) L Saw Pipes:- OD 36 inch to 100 inch with pipe thickness from 6 mm to 16 mm

30/06/2020


1 2 3 4 5 6

1M/s. Welspun Corp Ltd, Anjar

Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar, Kutch-370110(1) [email protected](2) Sanjay_raghavan @ welspun.com

(1) Hot Rolled Plates:- 8 mm to 140 mm thickness in all national & international Grades.(2) Hot Rolled Coils:- 6 mm to 25 mm thickness in all national & international Grades

31/01/2019


GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Mild Steel Hot Rolled Plates & Coils as per Vendor Selection

Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & Thickness Approval

Valid up to date

Remarks

Size (mm) Class

1 2 3 4 5 6 7

1M/s. Jai Balaji Industries,

Burdwan (W.B)

Unit-3, Vill. Banskopa, P.O. Rajbandh, Dist. Bardwan, West [email protected]

80 to 1200 mm (Except 125 & 750

mm)K-7 & K-9 31/01/2019

2M/s. Jindal Saw Limited,

Kutch

Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road, Tal: Mundra, Dist: [email protected]@jindalsaw.com

80 to 1000 mm K-7 & K-9 31/01/2019

3

M/s. Srikalahasthi Pipes Ltd., A.P.

( Formerly known as M/s. Lanco Industries Ltd., AP)

Rachagunneri-517641, Srikalahasthi Mandal, Chittor District, [email protected]@srikalahasthipipes.com

100 to 1100 mm ( Except 125 mm)

K-7 & K-9 31/01/2019

Name changed vide letter no. 299 dtd.17-10-2015

4M/s. Electrotherm (I) Ltd.,

Kutch

Survey no. 325, 310 KM Stone, Nr. Tollnaka, Village:- Samakhiyali, Ta:-

Bhachau, [email protected]

[email protected]

80 to 1200 mm K-7 & K-9 31/12/2019 -

80 to 1000 mmK-7 , K-8, K-10 &

K-12

80 to 1100 mm K-9

6

M/s. Tata Metaliks Limited, Medinapur

(WB)(Formerly known as Tata Metaliks DI Pipes Ltd.,)

P.O.- Samraipur, Kharagpur, Dist.: Medinapur(West) -721301, West

[email protected]

80 mm to 800 mm (Except 125 & 750

mm) K-7 & K-9 31/12/2019

Name changed vide letter no. 217 dtd.4-4-2018

7M/s. Rashmi Metaliks Ltd., Medinipore (WB)

Village:- Gokulpur, P.O. Shyamraipur, Dist. Paschim Medinipore, Pin-721 304, West [email protected]@rashmigroup.com

80 to 1000 mm (Except 125 & 750

mm) K-7 & K-9 31/12/2019 -


5M/s. Electrosteel Castings

Ltd., Kolakatta

30, B.T. Road, Khardah, P.O. Sukchar, Dist. 24 Parganas (North)

[email protected]@electrosteel.com

31/12/2019 -

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR

List of Approved Vendors of GWSSB for supply of DI Pipes (IS 8329) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval Valid

up to DateRemarks

Size (mm) Class

1 2 3 4 5 6 780 to 150 mm

(Except 125 mm)Class-10


Class-15

80 to 150 mm (Except 125 mm) & 200 to 600 mm &

700 mm

Class-20

80 to 150 mm (Except 125 mm) & 200 to 350 mm, 400 to 600 mm & 700

mm

Class-25

80 to 150 mm , Class -1080 to 700 mm, & 800mm, 900mm,

1000 mmClass -15

80 to 700 mm & 900mm,

Class -20

80 to 700 mm & 800mm

Class -25


1M/s. Apurva Vinimaya Pvt.

Ltd., Ahmedabad

P.O. Digvijay nagar, Ranip, Ahmedabad-382470


2A Infrastructure Ltd., Bhilwara (Rajsthan)

P.O. Hamirgarh-311025, Dist:- Bhilwara, Rajasthan

[email protected]@kanoria.org

31/12/2019 -

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of A.C. Pressure Pipes (IS 1592-2003) with ISI mark

(Mazza Process) as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.


Valid up to Date

Remarks

Size (mm) Class Type

1 2 3 4 5 6 7 8

1M/s. Navkar Builders Ltd.,

Kheda

Village- Sandhana, Block C.K.no:- 1160 & 1161A, Taluka-Matar, [email protected]

300, 450, 500, 600, 900, 1000, 1200 &

1400 mmNP-3 & NP-4

Vertical Vibrated cast

31-12-2017 -



List of Approved Vendors of GWSSB for supply of RCC pipe (IS:- 458:1989) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.


Valid up to Date

Remarks

Sr. No.

Name of Agency Adress/E-mail Address Type GradeApproval

Valid up to Remarks

1 2 3 4 6 7

Ordinary Portland cement

53 grade

Portland Pozzolana cement

-


53 grade


-


53 grade


-


53 grade


-


53 grade

Portland Pozzolana cement (Fly ash

based -15 to 35%)-


53 grade


43 GradeAs per IS 8112-

2013With ISI mark

Portland Pozzolana cement (Fly ash

based -15 to 35%)-


53 grade

Portland Slag cement -As per IS 455:1989

With ISI mark

4 M/s. Ultratech Ultratech cement, B-wing, 2nd floor, Ahura centre, Mahakali Caves road,

Andheri east, Mumbai-40009331/12/2019

Recommended by TCEL

2 M/s. ACC Ltd. ACC ltd., Cement House, 121,

Maharishi karve road, Mumbai-400020

31/12/2019

3 M/s. AmbujaElegant Business park, MIDC Cross

road-B, Off Andheri-Kurla road, Andheri East , Mumbai-400059

31/12/2019


List of Approved Vendors of GWSSB for supply of Cement (as per IS 269-2015) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt.4-4-2018)

1M/s. Saurastra Cement

Ltd., Porbandar

Saurashtra Cement Ltd., Nr. Railway Station, Ranavav- 360 560, [email protected]

[email protected]

31/12/2019 -

5M/s. J. K. Laxmi Cement

Ltd., Kalol

Village:- Moti Bhoyan, Taluka:- Kalol, Gandhinagar-382721


6M/s. Gujarat Sidhee Cement Ltd., Veraval

Gujarat Sidhee cement ltd., opp. Veraval Kodinar Highway, Veraval,

[email protected]

31/12/2018

7M/s. Hi-Bond Cement (India) Pvt. Ltd., Rajkot

Survey no. 315,316,317, Patidad Gomta Chowkdi, Village Patidad,

Taluka:- Gondal, [email protected]@[email protected]

[email protected]

31/12/2018

Sr. No.

Name of Agency Adress/E-mail Address Type GradeApproval

Valid up to Remarks

1 2 3 4 6 7Ordinary Portland

cement 53 grade


43 Grade


-

9M/s. Tata Chemicals Limited, Devbhumi

DwarkaMithapur, Devbhumi Dwarka-361345


53 Grade 06/03/2021


30/06/20208M/s. Wonder Cement

Ltd., Chittorgarh (Rajasthan)

R.K. Nagar, Taluka- Nimbahera, District;- Chittorgarh, [email protected]

Approved Size & Class

Size (mm)

1 2 3 4 6 7

1M/s. Aashiana Rolling Mills Ltd., Ahmedabad

Survey No.136, Nr. Friends Ispat, Kerala GIDC, Bavla, Ahmedabad-

[email protected]

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm 31/12/2019 -

2M/s. Electrotherm (I) Ltd.,

Kutch

Survey No. 325, N.H.No. 8A, 310 KM stone, Nr. Toll Naka, Village:-

Samakhiyali, Ta.: Bhachchau, Kutch-370140

[email protected]

Fe 415, Fe 500 & Fe 550

8 mm to 36 mm 31/12/2019 -

3M/s. Vinayak TMT bars Pvt. Ltd., Dahegam

Survey No. 25/1, 25/2, 24/P, Barot na Mosampur, Bayad Road, Post. Sampa,

Dahegam-382305, [email protected]

Fe 415 & Fe 500 8 mm to 36 mm 31/12/2019 -

4M/s. Shree Parmeshwar

Steel Pvt. Ltd., Ahmedabad

220/E, Gujarat Vepari Maha Mandal, A.V. Ltd., Odhav, [email protected]

Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,

Fe 550 D

8 mm to 32 mm 31/12/2019 -

5 M/s. TATA Steel Tata nagar, Jamshedpur, JharkhandFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

6 M/s. ESSARFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

7 M/s. SAIL Bokaro Steel City, Bokaro, JharkhandFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

8 M/s. JINDALFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

9M/s. Utkarsh Bars Pvt.

Ltd., Surendranagar

Plot no. 725, Bamanbore GIDC, Bamanbore, Taluka:- Chotila, Dist.

[email protected]@aryagroup.co.in

Fe 415, Fe 500 8 mm to 32 mm (Except 22 mm)

31/12/2018 -

10M/s. Gallantt Metal

Limited, Kutch

Nr. Toll Gate, Village:- Samakhyali, Bhachau, Kutch.

[email protected]

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm (Except 18 mm & 22

mm)30/06/2019 -

11M/s. Akshar Ispat Ltd.,

Himmatnagar

Block No. 158, Nr. GEB Sub-Station, Nikoda Chokdi, At PO Bavsar,

[email protected]

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm 30/06/2019 -

Fe 415, Fe 500 8 mm to 32 mm

Fe 415D, Fe 500D & Fe 550 D

8 mm to 32 mm (Except 18 mm )


List of Approved Vendors of GWSSB for supply of TMT/HSD Bars (IS 1786:2008) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address Material GradeApproval

Valid up to Date

Remarks

Recommended by

TCEL

12M/s. Shreeyam Power and

Steel Industries ltd., Gandhidham (Kutch)

Plot no. 332, GIDC, Industrial Estate, Phase-2, Village;- Mithirahar, Taluka:-

Gandhidham, [email protected]

30/11/2019

Approved Size & Class

Size (mm)

1 2 3 4 6 7

Sr. No.

Name of Agency Adress/E-mail Address Material GradeApproval

Valid up to Date

Remarks

13M/s. M.D. Inducto Cast Ltd.,Bhavnagar

survey no.144, Paiki 1 & 2, Nesada, Sihor, Bhavnagar

[email protected]@rudratmx.com

Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,

Fe 550 D, Fe 600

8 mm to 32 mm 30/06/2020

14M/s. Diamond TMT & Procon Pvt. Ltd., Bhavnagar

468 & 469-1/2, Village:- Sanodar, Talaja highway, Taluka"- Ghogha,

[email protected]

[email protected]

Fe 415, Fe 500 8 mm to 32 mm 30/06/2020


Size (mm) Class

1 2 3 4 5 6 7 8

1M/s. Kartar Valves Pvt.

Ltd., Jalandhar

Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013

[email protected]@kartarvalves.com

50 to 600 mmPN 1.0 &

1.6With ISI

mark31/01/2019

50 to 1200 mm PN 1.050 to 600 mm PN 1.6

50 to 1000 mm (SGI)

PN 1.0

50 to 600 mm (SGI)

PN 1.6

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

4M/s. Bharat Engineering

Works, Dhrangadhra

Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra-363310, [email protected]

50 to 600 mmPN 1.0 &

1.6With ISI

mark31/01/2019

5M/s. VAG Valves India Pvt. Ltd., Hyderabad

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,

Medak [email protected]

50 to 600 mm (DI)

PN 1.0 & 1.6

Without ISI Mark

31/01/2019

6M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,

Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.

[email protected] to 1600 mm

PN 0.6 to 3.0

Without ISI mark

31/12/2019 -

7M/s. Hawa Engineering

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, Ahmedabad


PN 1.0, 1.6, 2.0 &

2.5

Without ISI mark

31/12/2019

Cast steel/S.G. Iron/ DI

(Without ISI Mark)

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

2M/s. Sachdeva Metal

works, Jalandhar

C-33, Focal Point Extension, Jalandhar City-144001


With ISI mark

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Sluice Valves (IS-14846) as per Vendor Selection Report

submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.


Valid up to Date

RemarksISI Mark

31/01/2019Balitikuri, Bakultala, via Dasnagar,

[email protected]

M/s. H.Sarker & Company, Howrah

3With ISI

mark

-8M/s. Calsens Pvt. Ltd.,

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-

[email protected]

With ISI Mark

31/12/2019

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark

Up to 600 mm PN 1.0 Up to 300 mm PN 1.6Up to 1200 mm PN 0.6Up to 1500 mm PN 1.0 Up to 1300 mm PN 1.6

Up to 500 mm PN 2.0

50 to 900 mm PN 1.0

50 to 600 mm PN 1.6

11M/s. Bikaner Engineering

Works , Jaipur

F-445, Road No. 12, V.K.I. Area, Jaipur-302013

[email protected] to 300 mm 1.0 & 1.6

With ISI Mark

31/12/2019 -

50 to 600 mmPN 1.0 &

1.6With ISI

Mark31/12/2019 -

700 mmPN 1.0 &

1.6Without ISI

Mark30/06/2020

PD type Short Body

(D/F)

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

14M/s. Zoloto Industries,

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-

[email protected]

50 to 400 mm -With ISI

mark31/12/2018 -

15M/s. Joshijampala

Engineering Pvt. Ltd., Satara

M-64, Additional M.I.D.C., Satara-415 004, Maharashtra


up to PN 1.6

Without ISI mark

31/12/2018

16M/s. Perfect valves Pvt.

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, [email protected]

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

Mark31/12/2018

Pressure Rating

ammended vide letter no. 301 dt. 19-10-2015

17M/s. Fouress Engineering

(I) Ltd., Aurangabad

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148

[email protected]@fouressind.com

Up to 750 mmUp to PN

1.6Without ISI

Mark31/12/2018 -

Plot No. 2632, GIDC Lodhika, Metoda, Rajkot-360021

[email protected]

With ISI Mark

31/12/2019 -

10M/s. Upadhaya Valves

Manufacturers Pvt. Ltd., Kolkatta

P 280 Benaras road, [email protected]

[email protected]@upadhayavalves.net

With ISI Mark

31/12/2019

12M/s. Shiva Industries,

Jaipur

Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo

Road, Jhotawara, [email protected]

9M/s. Kirloskar Brothers

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,

Taluka-Shirpur, Dist. Pune, [email protected]

[email protected]@kbl.co.in

With ISI Mark

31-12-2017

SG Iron/ Cast steel

(without ISI Mark)

Without ISI Mark

-

13M/s. G.M. Engineering

Pvt. Ltd., Rajkot

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark

18M/s. S & M Industrial Valves Ltd., Kolkata

Sadananda Industrial Estate, Balitikuri, Bakultala,

Howrah-711 [email protected]

Up to 1000 mmup to PN

1.6Without ISI

Mark30/06/2019 -

19M/s. Sondhi

Industries,Jalandhar

C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab


up to PN 1.6

With ISI Mark

30/06/2019 -

20M/s. Shree Krishna Industries, Howrah

P-261/1, Benaras Road, Belgachia, Howrah-711 108


PN 1.0 & PN 1.6

With ISI mark

30/11/2019 -


Ltd., Ahmedabad


[email protected]@hawaengltd.com

1300 to 1600 mm

PN 0.6, PN 1.0, PN 1.6, PN 2.0, PN

2.5 & PN 3.0

Without ISI Mark

30/11/2019 -

Up to 900 mm PN 1.0With ISI

mark


mark

Up to 1200 mm PN 1.0Without ISI

mark


mark


mark


mark

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6


2.5Without ISI

Mark

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

mark06/03/2021

300 to 1200 mm PN 1.0 &

PN 1.6 Without ISI

Mark06/03/2021

50 to 300 mmUp to PN

1.6With ISI

mark


1.6Without ISI

Mark

50 to 1200 mmPN 1.0 &

PN 1.6 With ISI

mark


2.0Without ISI

Mark

up to 800 mmUp to PN

1.6Without ISI

MarkResilient Seated

50 to 1200 mm PN 1.050 to 600 mm PN 1.6

With ISI mark

MH-6 Chamrail Near Kona Express

06/03/2021

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402

[email protected]@[email protected],

M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah

27

06/03/2021

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004

[email protected]@nvrfittings.com

M/s. Mac International, Jalandhar

26

22M/s. Kalpana valves

Manufacturing co. (P) Ltd., Howrah

Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113

[email protected]/06/2020 D/F

23M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105


30/06/2020Kashi pur, Das nagar, Howrah-711105

(WB)[email protected],

M/s. Jupiter Engineering Co., Howrah

24 C.I /D.I.

D/F

With ISI Mark

M/s. Sigma Flow Control India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403

[email protected]

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark


1.6Without ISI

Mark


1.6Without ISI

MarkResilient Seated

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6


1.6Without ISI

Mark

30M/s. McWane Services Pvt. Ltd., Coimbatore

143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062


PN 1.0 & PN 1.6

Without ISI Mark

06/03/2021 DI


1.6With ISI

mark


1.6Without ISI

Mark


1.6With ISI

mark


1.0Without ISI

Mark

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

mark

350 to 600 mmPN 1.0 &

PN 1.6 Without ISI

Mark

50 to 1200 mm PN 1.0With ISI

mark

50 to 600 mm PN 1.6With ISI

mark

600 mm Up to PN

2.5Without ISI

Mark

06/03/2021P-261/1, Benaras Road, Belgachia,

[email protected]

M/s. Shree Krishna Industries, Howrah

34

06/03/2021 G.T. Road, Bye Pass, Maqsoodan,

[email protected]

M/s. Bir Industries, Jalandhar

33

06/03/2021

41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal

[email protected]@vsnl.net

M/s. Kamala Valves & Engineering Pvt. Ltd.,

Howrah32

29

06/03/202169A, Balitikuri Industrial Estate,

[email protected]

M/s. Indian Valve International, Howrah

31

With ISI mark

06/03/2021

Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West

[email protected],

[email protected]

M/s. Durga Valves PVt. Ltd., Howrah

06/03/2021MH-6 Chamrail, Near Kona Express

Highway, [email protected]

M/s. Kejriwal Castings Ltd., Howrah

28


Size (mm) Class

1 2 3 4 5 6 7 8


Ltd., Jalandhar



50 to 600 mmPN 1.0 &

1.6With ISI Mark 31/01/2019


works, Jalandhar



PN 1.0 & 1.6

Without ISI Mark

31/01/2019

3M/s. H.Sarker &

Company, Howrah

Balitikuri, Bakultala, via Dasnagar, Howrah-711113


PN 1.0 & 1.6

With ISI Mark 31/01/2019


Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal, Medak [email protected]

50 to 1000 mm (DI)

PN 1.0 & 1.6

Without ISI Mark

31/01/2019


Valsad (Plant -2)



PN 0.6 to 3.0

Without ISI Mark

31/12/2019As per IS 5312

(part 1 )


Ltd., Ahmedabad



PN 1.0 & 1.6


Cast steel/S.G. Iron/ DI

(without ISI Mark)

50 to 300 mm PN 1.0

50 to 600 mm PN 1.6

Upto 800 mm PN 0.6

Upto 1500 mm PN 1.0

Upto 1500 mm PN 1.6

Upto 900 mm PN 2.0

Upto 1200 mm PN 3.0

9M/s. Bikaner

Engineering Works, Jaipur



PN 1.0 & 1.6

Without ISI mark

31/12/2019As per IS 5312

(part 1 )

50 to 300 mmPN 1.0 &

1.6Without ISI

mark31/12/2019

As per IS 5312 (part 1 )

350 to 600 mmPN 1.0 &

1.6Without ISI

mark30/06/2020

As per IS 5312 (part 1 )


Jaipur

Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo

Road, Jhotawara, [email protected]

S.G. Iron/ Cast Iron

7M/s. Calsens Pvt. Ltd.,

Howrah


[email protected]


GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Non Return (Reflux) Valves (IS:5312) as per Vendor

Selection Report submitted by Different TPI (As on dt.4-4-2018)

Sr. No.


Valid up to Date

RemarksISI Mark

-


Ltd., Pune




Without ISI Mark

31-12-2017

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark


Pvt. Ltd., Rajkot



PN 1.0 & PN 1.6

Without ISI mark

31/12/2019As per IS 5312

(part 1 )


Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026


Without ISI Mark

31/12/2018

13M/s. Joshijampala




up to PN 1.6

Without ISI Mark

31/12/2018


Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather

Complex, [email protected]

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark 31/12/2018 -

15M/s. Fouress

Engineering (I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, [email protected]

[email protected]

450 to 1800 mm

Up to PN 16 (16 bar)

Without ISI Mark

31/12/2018Single Door &

Multi door

16M/s. Flownix valves Pvt.

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114


up to 24 kg/sqcm

Without ISI Mark

31/12/2018 -

up to 1200 mm

up to PN 1.6

Without ISI Mark

Dual plate check valve

up to 500 mmup to PN

1.6Without ISI

MarkSwing Type check valve

30/06/201917M/s. S & M Industrial Valves Ltd., Kolkata



Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark

150 to 300 mm PN 1.0

50 to 125 mm PN 1.6

350 to 400 mm Up to PN

1.6 Without ISI

Mark




PN 1.0 & PN 1.6

Without ISI Mark

30/11/2019


Ltd., Ahmedabad



650 to 1200 mm

PN 2.0, PN 2.5 & PN

3.0

Without ISI Mark

30/11/2019


1.6With ISI Mark

CI D/F Swing Check

Up o 1000 mm PN 1.0Without ISI

Mark

CI D/F Multi door Swing

Check

22M/s. Shree Balaji

Industries, Howrah



Up to PN 1.6

With ISI Mark 30/06/2020CI D/F Swing

Check

Up to 600 mm PN 1.0 &

PN 1.6With ISI Mark

up to 1200 mm

PN 1.6Without ISI

Mark

50 to 900 mmPN 1.0 &

PN 1.6Without ISI

Mark

40 to 300 mm -Without ISI

MarkDI Resilient

Seated


1.6With ISI Mark


1.6Without ISI

Mark

Up to 600 mm As per IS 5312

(part 1 ) Up to 1400

mm As per IS 5312

(part 2)

50 to 600 mm PN 1.0 &

PN 1.6With ISI Mark Single Door

Up to 1500 mm

UP to PN 1.6

Without ISI mark

Single/ Multi Door

Up to 600 mm PN 1.0 With ISI Mark


1.6Without ISI

mark

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark

350 to 500 mmPN 1.0 &

PN 1.6Without ISI

mark

50 to 600 mm UP to PN

1.6With ISI Mark

500 to 1000 mm

UP to PN 1.6

Without ISI mark

30




DISwing Check


69A, Balitikuri Industrial Estate, Howrah-711113

[email protected]/03/2021 Swing Check

Swing Check06/03/202128

26


MH-6 Chamrail, Near Kona Express Highway, Howrah-711323

[email protected] 06/03/2021



[email protected]@cal2.vsnl.net.in

Up to PN 1.6

Without ISI Mark

06/03/2021



[email protected],

Swing Check 06/03/202125

Swing Check type

30/06/2020

23M/s. Jupiter Engineering

Co., Howrah

Kashi pur, Das nagar, Howrah-711105 (WB)

[email protected], 30/06/2020

M/s. Sigma Flow Control India Ltd., Kolkata



M/s. Mac International, Jalandhar






[email protected]

Swing Check type


[email protected]

M/s. Sondhi Industries,Jalandhar

18 30/06/2019With ISI Mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark

31M/s. Kamala Valves & Engineering Pvt. Ltd.,

Howrah



50 to 800 mmUP to PN

1.6Without ISI

mark06/03/2021 Swing Check

32M/s. Bir Industries,

Jalandhar

G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008


PN 1.0 & PN 1.6

With ISI Mark 06/03/2021 Swing Check

50 to 600 mm PN 1.0 &

PN 1.6With ISI Mark


mark

06/03/202133M/s. Shree Krishna Industries, Howrah

P-261/1, Benaras Road, Belgachia, Howrah-711108

[email protected]


Size (mm) Class

1 2 3 4 5 6 7 8

40 to 600 mm PN 1.0

40 to 300 mm PN 1.6


works, Jalandhar



PN 1.0 & 1.6

Without ISI mark

31/01/2019

40 to 2600 mm 150#Without ISI

mark31/01/2019

Class as per API Standard

40 to 2000 mmPN 1.0 &

PN 1.6With ISI Mark 31/12/2019 -




200 to 4000 mm (DI)

PN 1.0 & 1.6

Without ISI mark

31/01/2019 -

5M/s. Delval Flow

Controls Pvt. Ltd., Pune

GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka Khandala, District-

[email protected]

[email protected]

80 to 2200 mm PN 10

Without ISI mark

(As per BS EN 593/API 609

Specification)

31/12/2019 -


Valsad (Plant-I)

Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, Gujarat


50 to 1000 mmPN 0.6 to

3.0Without ISI

Mark31/12/2019

As per IS 13095/ BS 5155-593 / AWWA C 504


Valsad (Plant -2)



PN 0.6 to 3.0

Without ISI Mark

31/12/2019As per IS 13095/

BS 5155-593 / AWWA C 504

3M/s. GM Engineering ,

Rajkot

Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-360021

[email protected]


List of Approved Vendors of GWSSB for supply of Butterfly Valves (IS 13095) as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.


Valid up to Date

RemarksISI Mark


Ltd., Jalandhar



31/01/2019With ISI mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark

40 to 600 mm PN 1.0 With ISI Mark

Wafer Short, Double flangedCS/S.G. Iron/M.S. Fabricated/DI

40 to 300 mm PN 1.6 With ISI Mark

CS/S.G. Iron/M.S. Fabricated/DI Wafer Short

650 to 2000 mmPN 1.0 &

PN 1.6

Without ISI Mark

2100 to 2600 mmPN 1.0 &

PN 1.6

Without ISI Mark

( As per AWWA C504 )

40 to 300 mmPN 1.0 &

1.6Wafer Type

40 to 1200 mmPN 1.0 &

1.6Double Flange

upto 3800 mm PN 0.6

upto 3000 mm PN 1.0

upto 2700 mm PN 1.6

upto 2600 mm PN 2.0

upto 800 mm PN 2.5

upto 1200 mm PN 3.0

upto 650 mm PN 4.0

50 to 300 mmPN 1.0 to

1.6

Wafer Short (resilient Seated)

200 to 1200 mmPN 1.0 to

1.6

Double flange short, (resilient

Seated)

12M/s. Intervalve (India)

Ltd., Pune

94/1 Manjari, Off Soli, Poonawalla Road, Pune-412307


PN 0.6, PN 1.0, PN 1.6

Without ISI mark

(As per IS 13095/ BSEN

593/API -609 / AWWA C 504)

31/12/2018CI, SGI (DI), M.S.

Fabricated


Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-

[email protected]

40 to 600 mm -Without ISI

Mark31/12/2018 -

14M/s. Joshijampala




up to PN 1.6

Without ISI Mark

31/12/2018


SG Iron/ Cast steel

Without ISI Mark

31-12-2017

11M/s. Upadhaya valves





Ltd., Pune




31/12/2019


Ltd., Ahmedabad




Howrah


[email protected]

CS/S.G. Iron/M.S.

Fabricated/DI Double flange

With ISI Mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark


Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather

Complex, [email protected]

40 to 300 mm & 350 to 600 mm

PN 1.0 & PN 1.6



(I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, [email protected]

[email protected]


40 (40 Bar)

Without ISI Mark

31/12/2018




up to 900 mmup to PN

1.6Without ISI

Mark30/06/2019 -

40 to 300 mmup to PN

1.6With ISI Mark

350 to 700 mmup to PN

1.6Without ISI

Mark

19M/s. Dynamic Valves Pvt.

Ltd., Mumbai

R-353, Rabale MIDC, Navi Mumbai-400701


up to PN 1.6

Without ISI Mark

30/06/2019 -




PN 1.0 & PN 1.6

Without ISI Mark

30/11/2019 -

350 to 600 mm PN 1.6

40 to 1200 mmPN 2.0, PN 2.5 & PN

3.0

2700 to 3000 mmPN 1.0 &

PN 1.6


Jaipur

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,

[email protected]

50 to 700 mmPN 1.0 &

PN 1.6Without ISI

mark30/06/2020

Up to 900 mm PN 1.0 With ISI mark


2.5Without ISI

mark


1.6With ISI mark


1.6Without ISI

mark

25

M/s. Rotex Manufacturers &

Engineering Pvt. Ltd., Thane (Maharashtra)

Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra

[email protected]@rotexindia.com


16Without ISI

mark30/06/2020

40 to 1200 mm PN 1.040 to 2000 mm PN 1.6


2.5Without ISI

mark

27M/s. Sigma Flow Control

India Ltd., Kolkata



PN 1.0 & PN 1.6

Without ISI mark

06/03/2021


Co., Howrah


[email protected],

With ISI mark C.I./ D.I.30/06/2020

30/06/2020

30/06/202024M/s. Shree Balaji

Industries, Howrah


[email protected]

M/s. Kalpana valves Manufacturing co. (P)

Ltd., Howrah


[email protected]

M/s. Sondhi Industries, Jalandhar


[email protected]/06/2019 -18


Ltd., Ahmedabad



Without ISI mark

-30/11/2019

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.


Valid up to Date

RemarksISI Mark


1.6With ISI mark


1.6Without ISI

mark

350 to 2000 mm PN 1.0 &

PN 1.6 With ISI mark CL-125/ CL-150


2.0Without ISI

mark

80 to 1200 mmPN 1.0 &

PN 1.6With ISI mark


1.6Without ISI

markDouble Flange

40 to 1200 mmPN 1.0 &

PN 1.6

1400 to 2000 mm PN 1.6


2.0Without ISI

Mark

40 to 600 mmPN 1.0 &

PN 1.6 With ISI mark

700 to 2000 mmPN 1.0, PN 1.6 & PN

2.5

Without ISI mark


1.6With ISI mark


1.6Without ISI

mark


1.6With ISI mark


1.6Without ISI

mark


Jalandhar



PN 1.0 & PN 1.6

Without ISI mark

06/03/2021

50 to 1200 mm PN 1.0 With ISI mark50 to 600 mm PN 1.6 With ISI mark


2.5Without ISI

mark



[email protected]


Howrah



06/03/202134




31

30

M/s. McWane Services Pvt. Ltd., Coimbatore

32143/2A, Anna Nagar Road,

Neelambur, [email protected]

06/03/2021 DI



[email protected]



[email protected],

[email protected]

06/03/2021

With ISI mark06/03/2021

28M/s. Mac International,

Jalandhar



06/03/2021




06/03/202129


Size (mm) Class

1 2 3 4 5 6 7 8 9

15 to 50 mmPN 1.0 &

1.6With ISI mark

50 to 200 mmPN 1.0 &

1.6Kinetic Air

valveWithout ISI

mark

15 to 50 mmPN 1.0 &

1.6Without ISI

mark

50 to 200 mmPN 1.0 &

1.6Kinetic Air

valveWithout ISI

mark




32 to 200 mm (D.I.)

PN 1.0 & 1.6

Without ISI mark

31/01/2019

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

25 to 50 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

mark

20 to 200 mmPN 0.6 to

3.0-

Without ISI mark

-

20 to 300 mmPN 0.6 to

3.0Kinetic

Without ISI mark

As per AWWA C-

512

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Air Valves (IS 14845) as per Vendor Selection Report submitted by

Different TPI (As on dt.4-4-2018)

Sr. No.


Valid up to Date

RemarksISI MarkType


Ltd., Jalandhar



31/01/2019

31/01/2019C-33, Focal Point Extension, Jalandhar

[email protected]

M/s. Sachdeva Metal works, Jalandhar

2

31/12/2019

31/01/2019

Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra-


M/s. Bharat Engineering Works, Dhrangadhra

4


Valsad (Plant -2)


[email protected]

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.


Valid up to Date

RemarksISI MarkType

15 to 50 mmPN 1.0,

1.6, 2.0 & 2.5

S-1 & S-2Without ISI

markCS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

DS-2 Without ISI

markCS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

Double Acting

Kinetic DK Type

Without ISI mark

CS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

Double Acting

Temper Proof

Without ISI mark

As per AWWA C-

512-92CS/S.G. Iron/DI


Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-711101


PN 1.0 & 1.6

DS1, DS2 & DK

Without ISI mark

31/12/2019 -

upto 200 mmPN 16, PN

20 , PN 30

upto 250 mm PN 10

upto 200 mm PN 4.0

upto 40 mmPN 1.0 &

1.6S1

upto 50 mmPN 1.0 &

1.6S2

50 to 200 mmPN 1.0 &

1.6DS2 & DK

15 to 80 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

mark

As per AWWA C -

512


Ltd., Pune




KineticWithout ISI

mark31-12-2017

-

9M/s. Upadhaya valves




With ISI mark

31/12/2019

10M/s. Bikaner Engineering

Works, Jaipur



Resilient Seated

SG iron/ Cast steel


Ltd., Ahmedabad



Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.


Valid up to Date

RemarksISI MarkType

15 to 80 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

mark

As per AWWA C -

512

25 to 50 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Kinetic

Without ISI mark



C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148

[email protected]@fouressind.com

up to 300 mmUp to PN

2.5-

Without ISI mark

31/12/2018 -


Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114


Up to 24 kg/sqcm

-Without ISI

mark31/12/2018 -





1.6-

Without ISI mark

30/06/2019 -

16M/s. Sondhi




Up to PN 1.6

-Without ISI

mark30/06/2019 -



[email protected] to 200 mm - -

Without ISI mark

30/11/2019 -

15 to 40 mmPN 1.0 &

PN 1.6S1

25 to 50 mmPN 1.0 &

PN 1.6S2

40 to 200 mmPN 1.0 &

PN 1.6DK Type

40 to 200 mmPN 1.0 &

PN 1.6DS1

40 to 200 mmPN 1.0 &

PN 1.6DS2

15 to 200 mmPN 2.0 &

PN 2.5-

Without ISI mark




[email protected] to 150 mm PN 1.0 -

Without ISI mark

30/06/2020

20M/s. Shree Balaji

Industries, Howrah



Up to PN 1.6

- With ISI mark 30/06/2020

21



Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra

[email protected]@rotexindia.com


25-

Without ISI mark

30/06/2020

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,

[email protected]

31/12/2019


Pvt. Ltd., Rajkot



30/11/2019 -With ISI mark


Ltd., Ahmedabad



-


Jaipur

-

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.


Valid up to Date

RemarksISI MarkType

40 to 200 mmPN 1.0 &

PN 1.6S1, S2, DS1, DS2 & DK

With ISI mark -


2.5Temper

ProofWithout ISI

mark

As per AWWA C -

512


India Ltd., Kolkata


[email protected] to 200 mm -

Temper Proof

Without ISI mark

06/03/2021As per

AWWA C -512


Jalandhar




1.6-

Without ISI mark

06/03/2021

50 to 200 mmPN 1.0 &

PN 1.6- With ISI Mark

25 to 40 mmPN 1.0 &

PN 1.6-

Without ISI mark

50 to 200 mmPN 1.0 &

PN 1.6Temper

ProofWithout ISI

mark

As per AWWA C -512

15 to 40 mmPN 1.0 &

PN 1.6S-1

25 to 50 mmPN 1.0 &

PN 1.6S-2

40 to 200 mmPN 1.0 &

PN 1.6DS-1, DS-2 ,

DK


1.6

Temper Proof

(Kinetic Type)

Without ISI mark

As per AWWA C -

512

40 to 200 mmPN 1.0 &

PN 1.6DK Type With ISI mark


1.6-

Without ISI mark

40 to 300 mm PN 1.0Temper

ProofWithout ISI

mark

As per AWWA C -

512

Up to 200 mmPN 1.0 &

PN 1.6-

Without ISI mark

DI

Up to 200 mmPN 1.0 &

PN 1.6Temper

ProofWithout ISI

mark

DI (As per AWWA C -

512)

15 to 25 mm PN 1.0 Single ActingWithout ISI

mark


1.6DS1, DS2 &

KineticWithout ISI

mark


1.6

Temper Proof

(kinetic)

Without ISI mark


1.6DS 1, DS 2 &

DKWith ISI mark


1.6Single & Double

Without ISI mark


1.6Temper

Proof Without ISI

mark

06/03/2021As per

AWWA C -512


Howrah



30

M/s. McWane Services Pvt. Ltd., Coimbatore



06/03/2021


Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal

[email protected], [email protected]

27 06/03/2021

-69A, Balitikuri Industrial Estate,

[email protected]


29

28

26M/s. Kejriwal Castings

Ltd., Howrah



With ISI mark

06/03/2021




25

30/06/202022M/s. Jupiter Engineering

Co., Howrah


[email protected],

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.


Valid up to Date

RemarksISI MarkType


Jalandhar



PN 1.0 & PN 1.6

Temper Proof

Without ISI mark

06/03/2021As per

AWWA C -512

15 to 200 mmPN 1.0 &

PN 1.6- With ISI mark 06/03/2021


2.5Temper

Proof Without ISI

mark06/03/2021

As per AWWA C -

512

M/s. Shree Krishna Industries, Howrah


[email protected]


Size (mm) Class1 2 3 4 5 6 7 8 9

15 mm to 600 mm

150# to 2500#

SluiceWithout ISI

mark

15 mm to 600 mm

150# to 2500#

ConduitWithout ISI

mark

upto 700 mm 150# -

Up to 500 mm

300# & 600#

-

Up to 100 mm

900# -


Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road,

[email protected]

50 to 300 mm

- SluiceWithout ISI

mark31/12/2018 -

4M/s. Fouress

Engineering (I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-

[email protected]

[email protected]

50 to 3600 mm

Up to PN 16 (16

bar)Knife Edge

Without ISI mark

31/12/2018 -




Up to 300 mm

Up To PN 1.6

Knife EdgeWithout ISI

mark30/06/2019 -

6M/s. Orbinox India Pvt.

Ltd., Coimbatore

S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641

[email protected]

[email protected]@orbi

nox.com

50 to 1200 mm

- Knife EdgeWithout ISI

mark30/06/2019 -


Ltd., Ahmedabad



40 to 1000 mm

PN 1.0 & PN 1.6


mark30/11/2019 -


Co., Howrah


[email protected],

Up to 800 mm

PN 1.0 Knife EdgeWithout ISI

mark30/06/2020

as per MSS SP -81 / AWWA C520

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Gate Valves as per Vendor Selection Report submitted by

Different TPI (As on dt.4-4-2018)Sr. No.


Valid up to RemarksType ISI Mark

Class AS per API Standard1

M/s. GM Engineering , Rajkot



31-12-2017As per API 600(SG Iron/ Cast

steel)2

M/s. Kirloskar Brothers Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no.

252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune, [email protected]


Without ISI mark

Size (mm) Class1 2 3 4 5 6 7 8 9

Sr. No.


Valid up to RemarksType ISI Mark


India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-

711 [email protected]

40 to 1000 mm

-Resilient Seated

Without ISI mark

06/03/2021 -


Ltd., Howrah

MH-6 Chamrail, Near Kona Express Highway, Howrah-

[email protected]

50 to 1200 mm

Up to PN 1.6


mark06/03/2021 -

11M/s. Durga Valves PVt.

Ltd., Howrah

Ichhapur road, Canal Side, Santragachi, Howrah-711 104,

W t B l

Up to 900 mm

PN 1.6 Knife EdgeWithout ISI

mark06/03/2021 as per MSS SP -81


Size Class1 2 3 4 5 6 7 8 9


Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,

[email protected]

Up to 1500 x 1500 mm

PN 0.6 to 3.0

Sluice (Single faced

circular/Rectangular

Without ISI mark

31/12/2019

As per BS 5155-593/ AWWA C

504

2M/s. Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo

Hospital, sanwer Road, Indore-453111 (MP)

[email protected]

150 x 150 mm to 3000 x 5000 mm

- -Without ISI

mark31/12/2019 As per IS 13349




Up to 1200 x 1200 mm

- Sluice Without ISI

mark30/06/2019 -

4M/s. Bharat Industrial corporation, Ghaziabad (UP)

D-131, Industrial Area, Bulandshahr Road, Ghaziabad-

201 009, Uttar [email protected]

Up to 2500 x 3000 mm

- SluiceWithout ISI

mark30/06/2019 As per IS 13349


Co., Howrah


[email protected],

Up to 2000 mm

III SluiceWithout ISI

mark30/06/2020 As per IS 13349


Ltd., Howrah


[email protected]

150 x 150 mm to 1500 x 1500 mm

Up to PN 1.6

SluiceWithout ISI

mark06/03/2021


Ltd., Howrah


West [email protected],

[email protected]

2400 mm x 2800 mm

- SluiceWithout ISI

mark06/03/2021 As per IS 13349

8M/s. Indian Valve

International, Howrah


[email protected]

Up to 1200 mm x 1200

mm- Sluice

Without ISI mark

06/03/2021 As per IS 13349


Howrah



800 mm x 800 mm

- SluiceWithout ISI

mark06/03/2021 As per IS 13349


GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Sluice Gate as per Vendor Selection Report submitted by TPI (As

on dt. 4-4-2018) Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class

Type ISI MarkApproval

Valid up to Remarks

Size (mm) Class

1 2 3 4 5 6 7 8

6 mm to 700 mm

150# to 900#

Without ISI mark

31/01/2019Class AS per API

Standard

50 to 1500 mm

PN 1.6Without ISI

mark31/12/2019

Dual plateAs per API 594


Valsad (Plant-I)

Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, [email protected]@gmail.com

50 to 1000 mm

PN 0.6 to 3.0

Without ISI mark

31/12/2019Dual plate

As per API 594

1000 to 2400 mm

PN 0.6 to 3.0

Without ISI mark

Dual plateAs per API 594

600 to 1200 mm

PN 0.6 to 3.0

Without ISI mark

Multi Door


Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, [email protected]

50 to 2000 mm

PN 1.0, 1.6, 2.0 &

2.5

Without ISI mark

31/12/2019Dual plate

(Double Flange)As per API 594

upto 1500 mm

PN 6

upto 1100 mm

PN 10

upto 1500 mm

PN 16

upto 900 mm

PN 20

upto 600 mm

PN 40

upto 750 mm

150# & 300#

upto 300 mm

600#

upto 100 mm

900#

Dual plateAs per API 594 (SG Iron/ Cast

steel)

Without ISI mark

Check valveBS:-1868


Rajkot


[email protected]


Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,

[email protected]

31/12/2019


Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253,

Kondhapuri, Taluka-Shirpur, Dist. Pune, Maharastra


[email protected]

Without ISI mark

31-12-2017

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Check Valves as per Vendor Selection Report


Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Approval

Valid up to Date

RemarksISI Mark

50 to 500 mm

PN 1.0 & PN 1.6

Without ISI mark

31/12/2019Dual Plate

As per API 594

600 to 700 mm

PN 1.0 & PN 1.6

Without ISI mark


As per API 594

up to 800 mm

up to PN 1.6

Without ISI mark

Swing Type

up to 1300 mm

up to PN 1.6

Without ISI mark

Dual plate


Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road,

[email protected]

15 to 100 mm

-with ISI

mark31/12/2018 As per IS 778

9M/s. Sondhi


C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-


Up to 400 mm

-Without ISI

mark30/06/2019

Dual Plate AS per API 594 &

598

10M/s. Orbinox India Pvt.

Ltd., Coimbatore

S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641

[email protected]

[email protected]@orbi

nox.com

50 to 800 mm

-Without ISI

mark30/06/2019 -



[email protected]

50 to 700 mm

-Without ISI

mark30/11/2019

Dual Plate AS per API 594


Ltd., Ahmedabad



2100 to 2400 mm

PN 1.0 & PN 1.6

Without ISI mark





[email protected]

Up to 600 mm

up to PN 1.6

Without ISI mark


AS per API 594 & 598

14M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West [email protected]

Up to 600 mm

up to PN 1.6

Without ISI mark


AS per API 594 & 598


Co., Howrah


[email protected],

Up to 1400 mm

Up to PN 2.5

Without ISI mark


AS per API 594


India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-


50 to 300 mm

-Without ISI

mark06/03/2021

Dual Plate AS per API 594


Jalandhar

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-

[email protected]

[email protected]

50 to 450 mm

Up to PN 1.6

Without ISI mark


AS per API 594

18M/s. G.M. Dalui & Sons

(Pvt.) Ltd., Howrah

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-


[email protected]@gmail.com,

Up to 3000 mm

Up to PN 1.6

Without ISI mark


AS per API 594


Jaipur

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara, [email protected]



C-2, MIDC industrial Area, Paithan, Dist. Aurangabad-

[email protected]

31/12/2018


Ltd., Howrah


[email protected]

50 to 1200 mm

Up to PN 1.6

Without ISI mark


AS per API 594


Ltd., Howrah



[email protected]

50 to 1400 mm

Up to PN 2.0

Without ISI mark


AS per API 594



[email protected]

50 to 700 mm

PN 1.0, PN 1.6 &

PN 2.5

Without ISI mark

06/03/2021DI Dual Plate

AS per API 594

22M/s. Indian Valve

International, Howrah


[email protected]

50 to 1200 mm

Up to PN 1.6

Without ISI mark

06/03/2021 Dual Plate

AS per API 594


Howrah



50 to 800 mm

Up to PN 1.6

Without ISI mark


AS per API 594



[email protected]

Up to 900 mm

Up to PN 2.5

Without ISI mark


AS per API 594


Approved Size

Size (mm)

1 2 3 4 5 7 8 9

Zero Velocity100 mm to 2400

mm-

Air cushion valve 100 to 300 mm -

Zero velocity valve (PSLC)

500 to 2350 mm -

Air Cushion valves (QRDA)

100 to 400 mm -

Zero Velocity Up to 2700 mmup to 30 kg./sqcm

Air cushion valve up to 400 mmup to 30 kg./sqcm

Zero Velocity Up to 1000 mm up to 2.5

Air cushion valve up to 300 mm up to 1.6

Zero Velocity Up to 1400 mm up to PN 1.6

Air cushion valve up to 300 mm up to PN 1.6

Zero Velocity Up to 1000 mm up to PN 2.5

Air cushion valve up to 200 mm up to PN 2.5



[email protected]

06/03/20215M/s. Durga Valves PVt.

Ltd., Howrah



[email protected]


Co., Howrah


[email protected], 30/06/2020

M/s. Megha Engineering & Infrastructure Ltd.,

Hyderabad

Plot No. 34/B, IDA Jeedimetla, Hyderabad-500055, AP

[email protected]@meil.in

31-12-2017 -


Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade,

[email protected]

31/12/2018 -



List of Approved Vendors of GWSSB for supply of Water Hammer Devices (Zero Velocity Valves & Air cushion valves) as per Vendor Selection Report submitted by TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address Type of Valves ISI MarkApproval

Valid up to Date

Remarks

1M/s Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo

Hospital, sanwer Road, Indore-453111 (MP)

[email protected]

31/12/2019 -

2

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & ClassApproval

Valid up to Date

Remarks

1 2 3 4 5 6

1M/s. Cair Euromatic

Automation Pvt. Ltd., Ahmedabad

Plot No. 178/179, Shiv Shakti Estate, Nr. V-Trans, Narol Road, Ahmedabad-


[email protected]

(A) Rotary Electrical Actuators:- Rotary Electrical Actuator for AWWA Butterfly Valve Double flanged, High-Performance Butterfly valve, Ball vale, 2-way ball valve, 3-way ball valve, and rotary Electrical Actuator for 4-way ball valve, fire safe design ball valve, fabricated butterfly valve

(B) Multi-turn Electrical Actuators:- Multi turn actuator operated sluice valve double flanged, gate valve double flanged, knife-gate valve, globe valve, control valve

Item Range:- (i) Three phase, single phase electrical actuators quarter turn (WP & Ex proof) Torque range:- 35 NM to 5000 NM (ii) Multi turn electrical actuators (WP & Flame proof) torque range;- 100 NM to 24000 NM(iii) Single phase electrical actuators (Linear) torque range:-150 kgf to 2500 kgf

31/01/2019

2M/s. Rotork Control (I)

Pvt. Ltd., Chennai

28-B, Ambattur Industrial Estate (North) Chennai-

[email protected]

mkumar.mahalingam@rotor

k.com

(A) Single Phase Actuator with electrically operated and remotely controlled quarter turn & multi turnCapacity:- 30 Nm to 300 Nm (3 kgm to 30 kgm)(B) Three Phase Actuators with electrically operated and remotely controlled quarter turn & multi turn Capacity:- 30 Nm to 1000 Nm (3 kgm to 102 kgm)

31/12/2019 -

3M/s. Auma India Pvt.

Ltd., Banglore

Plot no. 39-B Phase, Pennya Industrial Area,

[email protected].

[email protected]

Electric Actuators:-(a) Range From 30 Nm to 1000 Nm(b) 2000 Nm to 16000 Nm with electronic control. (Optional)

31/12/2018 -

4M/s. Marsh Automation

Pvt. Ltd., Pune

98A/25A, Hadapsar Industrial Estate, Pune-411

013rsdeshpande@marshauto

[email protected]

[email protected]

Three Phase Electrical Actuators of Torque Output Upto:- 1000 NM

06/03/2021

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Motorized Valve Actuators as per Vendor Selection Report



Size (mm) Class

1 2 3 4 5 6 7 8 9


Ltd., Jalandhar

Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-

[email protected]

[email protected]

Ball Valve15 to 100

mmCL-125 &

CL-250With ISI mark 31/01/2019

Ball Valve6 mm to 300

mm150# to 2500#

Ball Valve6 mm to 600

mm150# to

600#

Globe Valve15 mm to 300 mm

150# to 900#

Strainer Valve15 mm to 300 mm

-

Plug valve15 mm to 200 mm

150#

Needle Valve6 mm to 50

mm150# to

900#

Floating Ball Valve 15 to 300

mm600#

Without ISI mark

AS per API 609

Trunnion Mounted Ball

vales

up to 400 mm

600#Without ISI

mark

AS per API 609

upto 600 mm

PN 0.2

up to 400 mm

PN 1.0

upto 200 mm125#

upto 500 mm150#

upto 200 mm300#

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune,

[email protected].

[email protected]

[email protected]

Foot valveWithout ISI

mark31-12-2017

CI/ S.G. Iron / Cast steel As per IS:

4038

Globe valveWithout ISI

mark31-12-2017

As per BS: 1873 ( CI/ SG Iron /

Cast Steel)


List of Approved Vendors of GWSSB for supply of Other Valves as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.



Date Remarks Type of Valves ISI Mark


Rajkot

Plot No.2632, GIDC, Lodhika, village- Metoda,

[email protected]

31/01/2019AS per API Standard

Without ISI mark

3M/s. Delval Flow

Controls Pvt. Ltd., Pune

GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka

Khandala, District-Satara-412801

[email protected]

[email protected]

31/12/2019


Ltd., Pune

Pressure Relief valves/ Safety

Valves

Up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Pressure Reducing valve

up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Float Valvesup to 600

mmPN 0.6 to

PN 3.0Without ISI

mark

Pressure Sustaining Valves

up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Ball valve15 to 100

mmWithout ISI

mark31/12/2018

Gun metal Gate valve, Globe valve

15 to 100 mm

With ISI mark 31/12/2018As per IS

778

7M/s. Perfect Valves PVt.

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal

Road, Adjoining Leather Complex, [email protected]

Ball valve 1/2" to 4" Class 125 With ISI mark 31/12/2018AS per IS

9890:1981


Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road,

[email protected]

[email protected]

Foot valve15 to 600

mm

PN 1.0. PN 1.6 &

PN 2.0

Without ISI mark

30/11/2019 -

9



Manpada Road, Near Bhopar Village, Dombivli (E),

Dist. Thane, [email protected]@rotexindia.com

Ball ValveUp to 600

mmUp to PN

21Without ISI

mark30/06/2020 -


Ltd., Howrah


[email protected]

Foot valve50 to 1200

mmup to PN

1.6Without ISI

mark06/03/2021

Pressure RElief valves

up to 200 mm

up to PN 1.6

Without ISI mark

Float Valvesup to 200

mm-

Without ISI mark


143/2A, Anna Nagar Road, Neelambur, Coimbatore-

[email protected]

m

Pressure RElief valves (Flow

Control Valve)

Up to 300 mm

PN 1.0 & PN 1.6

Without ISI mark

06/03/2021 DI


Ichhapur road, Canal Side, Santragachi, Howrah-711

104, West [email protected],

06/03/202111

5M/s. Aira Euro

Automation Pvt. Ltd., Ahmedabad

Plot no. 123-124, Aira Estate, B/h. Security Estate, Nr. Kashiram Textile Mills, Narol Road, Ahmedabad-

380 028airaeuroautomation@gmail

.com

31/12/2018


Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar

Road, [email protected]


Howrah

41/2. "Q" Road, Belgachia, Howrah-711108, West

[email protected]

[email protected]

Float ValvesUp to 300

mm-

Without ISI mark

06/03/2021


Size (mm) Class

1 2 3 4 5 6 7 8

1 to 100 MLD -Fine & Course

Multi Rake Course Bar

As per customers Requirement

- Track rack screen

1M/s Jash Engineering Ltd.,

Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo Hospital, sanwer

Road, Indore-453111 (MP)[email protected]



List of Approved Vendors of GWSSB for supply of Different STP Items as per Vendor Selection Report submitted by TPI (As on dt. 4-4-2018)

Sr. No.


Approved Size & Class Approval Valid

up to Date Remarks

Name of Sub Items

Screen 31/12/2019

Date post:	06-Sep-2018
Category:	Documents
Upload:	phungkhanh
View:	226 times
Download:	0 times

GUJARAT WATER SUPPLY SEWERAGE BOARD …parthvalves.com 31/01/2019 4 M/s. Reliance Industries Ltd.,...

Documents