Date post: | 10-Feb-2017 |
Category: |
Documents |
Upload: | risto-rushford |
View: | 14 times |
Download: | 0 times |
RISTO RUSHFORD
Sample Photos of my work as a welder at Gunderson Marine
Quality Assurance Pick-up
The person who welded this section left a hole (porosity) in their weld. I was brought in to fix it.
Quality Assurance Pick-up
A closer look at the problem.
Quality Assurance Pick-up
Using carbon-arc gouging rods, I “scarfed out” the weld around the porosity.
Quality Assurance Pick-up
Here I used a grinder to clean up the rework site.
Quality Assurance Pick-up
And the finished repair is shown to be porosity free with weld dimensions matching the previous weld.
Fillet Welds: One section
Fillet Welds: Close up
About half a day’s work.
Fillet Welds
Pipe Work
Welded the flange onto the pipe. This piece required delicate, careful work.
Butt Weld
Longitudinal Girder
Butt Weld
Finished