+ All Categories
Home > Documents > H25CT Manual+Linde

H25CT Manual+Linde

Date post: 30-Oct-2014
Category:
Upload: jorge-moreno
View: 1,183 times
Download: 93 times
Share this document with a friend
Popular Tags:
513
Spare Parts List Linde Fork Lift Truck H25/27/30/32 with Combustion Engine from series 12/2009 1313 804 90 01 10.09
Transcript
Page 1: H25CT Manual+Linde

Spare Parts List

Linde Fork Lift TruckH25/27/30/32with Combustion Enginefrom series 12/2009

1313 804 90 01 10.09

Page 2: H25CT Manual+Linde
Page 3: H25CT Manual+Linde

Register 00 : ENGINE

01 CYLINDER BLOCK, OIL SUMP02 CRANKSHAFT, PISTONS AND CONNECTING RODS03 CYLINDER HEAD04 CAMSHAFT, VALVE05 OIL PUMP ,OIL DIPSTICK06 WATER PUMP07 OIL FILTER BRACKET , OIL FILTER08 FLANGE09 TOOTHED BELT , TOOTHED BELT COVER10 ALTERNATOR MOUNTING PARTS11 ALTERNATOR12 STARTER

Register 01 : POWER UNIT: ENGINE/MOTOR

01 AIR SUPPLY FOR ENGINE AND AIR FILTER02 ENGINE SUSPENSION AND AXLE DRIVE LPG ENGINE03 COOLING SYSTEM04 LPG SYSTEM - GOVERNED CATALYZER05 IGNITION SYSTEM REGULATED CATALYZER CONVERTER06 LPG TANK07 LPG TANK WITH SWIVELLING CONSOLE08 EXHAUST SYSTEM

Register 02 : DRIVE: TRANSMISSION

01 DRIVE AXLE02 Power unit and housing HPV03 Power unit and housing HMF04 Servopiston and gear pump05 Port plate housing and valves06 Remote control E2 (4-16 bar) non bleed07 Service units08 brake valve

Register 03 : CHASSIS UNIT

01 CHASSIS AND COUNTERWEIGHT02 HOOD & COVERINGS03 FRONT CONSOLE04 DAMPING MATS05 DRIVER SEAT (STANDARD)06 DRIVER SEAT MSG6507 DRIVERS CAB REAR-VIEW MIRROR

Index H25/27/30/32

28.10.2009 print no.1313 804 90 01

Page 4: H25CT Manual+Linde

Register 04 : STEERING AND WHEELS

01 HYDROSTATIC STEERING WITH LINES02 STEERING AXLE03 WHEELS AND TYRES

Register 05 : CONTROLS

01 PEDAL OPERATION DUAL PEDALS02 PEDAL OPERATION SINGLE PEDAL03 PARKING BRAKE04 ACTUATOR OF PILOT VALVE05 TILTABLE ARMREST (optional equipment)06 TILT ANGLE SENSOR (optional equipment)

Register 06 : ELECTRIC EQUIPMENT

01 ELECTRIC ARMATURES02 CENTRAL ELECTRICAL BOX AND CONTROLS03 BATTERY AND ACCESSORIES04 MAIN HARNESS LPG VERSION PART 105 MAIN HARNESS LPG VERSION PART 206 MAIN HARNESS LPG VERSION PART 307 VARIOUS CABLE LOOMS08 TRUCK LIGHTING, FLASH LIGHT AND DANGER SIGNAL09 WIRE HARNESS FOR LIGHTING10 HARNESS - CONTROL VALVE11 HARNESS LPG MONITORING12 CABLE TREES LEVEL INDICATOR

Register 07 : HYDRAULIC UNIT

01 CONTROL VALVE AND LINES02 control block VW10-M3 (BR 1313)03 control block VW10-M4 (BR 1313)04 OIL TANK WITH LINES AND ACCESSORIES05 OIL FILTER AND LINES FOR HYDRAULIC TRAVEL SYSTEM06 TILT CYLINDER07 ADDITIONAL HYDRAULICS HOSE LINES IN THE VEHICLE08 AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 150909 AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST MAST SERIES 150910 AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 150911 AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 151012 AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST SERIES 151013 AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 151014 AUXILIARY HYDRAULIC SERVICES FOR QUADRUPLE MAST SERIES 45DV MQ AND 55DV MQ

H25/27/30/32 Index

print no.1313 804 90 01 28.10.2009

Page 5: H25CT Manual+Linde

Register 08 : LIFT MAST

00 MAST IDENTIFICATION01 SIMPLEX MAST SERIES 150902 DUPLEX MAST SERIES 150903 TRIPLEX MAST SERIES 150904 LIFT CYLINDER FOR SIMPLEX MAST SERIES 150905 EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST 150906 MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT TYPE 150907 FORK CARRIAGE SERIES 1509 MAST08 LOAD BACKREST09 INTEGRAL SIDESHIFTER SERIES 1509 MAST10 HANG-ON SIDESHIFTER 150911 SIMPLEX MAST SERIES 151012 DUPLEX MAST SERIES 151013 TRIPLEX MAST SERIES 151014 LIFT CYLINDER FOR SIMPLEX MAST SERIES 151015 EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST SERIES 151016 MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT SERIES 151017 FORK CARRIAGE SERIES 1510 MAST18 INTEGRAL SIDESHIFTER MAST SERIES 151019 HANG-ON SIDESHIFTER 151020 QUADRUPLE MAST 45DV MQ AND 55DV MQ21 LEFT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST22 RIGHT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST23 FREE LIFT CYLINDER 45DV MQ and 55DV MQ24 FORK CARRIAGE FOR QUAD MAST 45DV MQ and 55DV MQ25 INTERGRAL SIDSHIFTER QUAD MAST 45DV MQ, 55DV MQ26 HANG-ON SIDESHIFTER QUAD MAST

Register 09 : SPECIAL EQUIPMENT

01 TERMINAL BOARD

Register 10 : MISCELLANEOUS

011 SPECIAL TOOLS , TRUCK DIAGNOSTIC011 SPECIAL TOOLS01 BAG FOR TECHNICAL DOCUMENTATION02 PLATES

Index H25/27/30/32

28.10.2009 print no.1313 804 90 01

Page 6: H25CT Manual+Linde
Page 7: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 900 15 27 07/06 /01 000 901 50 17 02/01 /02 000 903 40 36 02/01 /03 000 904 60 97 08/20 /01 05/03 /01

000 901 00 00 07/14 /01 000 901 52 57 08/20 /02 000 903 40 37 02/01 /03 000 905 01 22 07/05 /02 000 907 33 18 05/02 /01

000 901 00 07 08/25 /01 000 901 52 58 08/24 /01 000 903 68 90 07/05 /02 000 905 02 42 02/01 /02 05/03 /01

000 901 00 08 08/20 /02 08/25 /01 000 903 70 42 02/06 /01 000 905 02 43 02/01 /01 05/06 /01

000 901 01 96 02/06 /02 000 901 52 59 08/24 /01 000 903 75 10 02/06 /03 000 905 04 02 01/02 /01 000 907 33 21 05/03 /01

000 901 11 04 06/03 /02 08/25 /01 000 903 75 27 07/02 /01 000 905 11 00 04/01 /01 000 907 33 25 05/05 /01

000 901 16 26 07/14 /01 08/20 /02 07/03 /01 000 905 90 00 06/04 /02 000 907 50 12 08/15 /02

000 901 16 27 08/20 /01 000 901 90 59 01/05 /01 000 903 75 41 08/05 /03 000 906 35 06 01/02 /01 000 907 50 30 01/04 /02

000 901 16 28 07/14 /01 000 901 90 66 01/04 /01 08/15 /03 000 906 50 01 02/01 /02 000 907 50 40 08/20 /01

08/20 /03 000 901 90 70 01/04 /01 08/06 /01 000 907 01 14 08/15 /02 000 907 50 41 08/20 /01

08/20 /03 000 901 90 75 01/05 /01 000 904 08 20 03/06 /01 000 907 01 20 08/14 /01 000 907 50 42 07/14 /02

000 901 16 29 07/14 /01 000 901 90 78 06/02 /01 000 904 10 14 07/14 /01 000 907 01 32 07/06 /01 000 907 50 44 08/20 /02

000 901 16 30 07/14 /01 000 901 90 86 08/20 /03 000 904 12 10 07/14 /01 000 907 02 49 07/06 /01 000 907 50 45 08/21 /01

000 901 16 31 07/14 /01 000 901 90 88 08/25 /01 000 904 60 59 05/03 /01 000 907 04 01 08/05 /02 08/20 /02

000 901 16 56 08/20 /03 000 901 90 89 07/14 /01 06/01 /01 000 907 09 20 08/24 /01 000 907 50 46 02/01 /03

000 901 18 13 04/03 /02 000 901 91 06 08/20 /03 06/01 /02 08/25 /01 02/01 /03

000 901 30 40 08/04 /01 000 902 53 54 07/04 /01 000 904 60 63 02/06 /02 000 907 09 21 07/14 /01 000 907 50 47 02/01 /01

08/14 /01 000 903 02 04 08/17 /01 07/02 /01 08/20 /01 000 907 52 08 01/04 /01

08/05 /02 08/18 /02 07/02 /01 08/20 /03 01/04 /02

08/15 /02 000 903 02 77 08/07 /01 07/03 /01 000 907 09 22 07/14 /01 000 907 52 09 01/04 /02

000 901 30 43 01/08 /01 08/09 /01 07/03 /01 000 907 09 23 07/14 /01 000 908 01 08 08/20 /02

000 901 50 10 07/14 /02 000 903 11 16 07/05 /02 000 904 60 77 02/04 /03 000 907 09 24 08/20 /03 000 908 01 09 08/23 /01

000 901 50 11 08/20 /02 000 903 11 40 07/04 /02 000 904 60 80 07/14 /01 000 907 11 07 08/04 /01 000 908 02 61 02/02 /01

000 901 50 12 08/20 /03 07/05 /01 000 904 60 81 08/24 /01 000 907 11 28 04/02 /02 000 908 32 00 08/20 /01

000 901 50 14 02/01 /02 000 903 32 92 02/05 /01 08/25 /02 000 907 32 00 02/01 /03 000 908 35 08 09/01 /01

000 901 50 15 02/01 /02 000 903 40 34 02/01 /03 08/20 /01 000 907 33 15 05/02 /02 000 910 04 45 08/20 /01

000 901 50 16 02/01 /01 000 903 40 35 02/01 /03 000 904 60 96 08/20 /01 000 907 33 17 03/02 /01 000 910 05 05 04/02 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 1

Page 8: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 910 25 02 05/02 /01 000 914 03 02 02/04 /01 000 914 05 12 08/07 /01 08/12 /02 000 914 65 21 02/01 /02

000 912 02 29 01/06 /01 000 914 03 04 02/04 /01 000 914 05 13 08/07 /01 000 914 30 02 02/03 /01 000 914 65 22 02/01 /02

01/07 /01 000 914 03 20 02/04 /01 000 914 05 16 08/07 /01 02/02 /02 000 914 65 23 02/01 /01

000 912 02 30 01/06 /01 000 914 03 21 02/04 /01 000 914 06 12 02/06 /01 000 914 32 18 02/02 /01 000 914 65 24 02/01 /03

01/07 /01 000 914 03 22 02/04 /01 000 914 08 23 05/01 /02 02/03 /01 000 914 75 29 08/15 /02

000 912 11 19 02/03 /02 000 914 03 23 02/04 /01 05/05 /01 000 914 33 09 04/02 /01 000 914 75 34 08/15 /02

000 912 16 38 05/02 /02 000 914 03 24 02/04 /01 000 914 08 95 08/20 /03 000 914 35 06 02/02 /01 000 914 75 47 08/05 /02

000 912 21 02 08/02 /02 000 914 03 25 02/04 /01 000 914 09 03 08/01 /02 02/03 /01 000 914 75 68 01/02 /02

08/03 /02 000 914 03 26 02/04 /01 08/11 /02 000 914 40 24 01/02 /02 000 914 82 20 08/24 /01

08/13 /02 000 914 03 27 02/04 /01 000 914 10 14 03/02 /02 000 914 61 51 02/03 /01 08/25 /01

08/12 /02 000 914 03 28 02/04 /01 05/01 /02 02/02 /02 08/20 /01

000 912 21 19 07/06 /01 000 914 03 29 02/04 /01 05/02 /02 000 914 61 52 02/02 /02 000 914 82 22 07/14 /03

000 912 21 79 04/02 /02 000 914 03 30 02/04 /02 000 914 10 44 02/08 /01 02/03 /02 000 914 82 23 08/20 /02

000 912 22 12 07/06 /01 000 914 03 31 02/04 /01 000 914 10 76 08/20 /03 000 914 61 53 02/02 /02 000 914 82 35 08/20 /02

000 912 22 18 07/06 /01 000 914 03 32 02/04 /01 000 914 11 28 02/03 /02 02/03 /02 000 914 82 36 08/20 /02

000 912 42 11 03/01 /02 000 914 03 33 02/04 /01 000 914 16 13 04/02 /01 000 914 61 54 02/02 /02 000 914 82 37 08/20 /02

000 912 89 02 04/02 /01 000 914 03 34 02/04 /01 000 914 16 34 08/03 /05 02/03 /02 000 914 82 38 08/20 /02

000 912 95 26 08/24 /01 000 914 03 35 02/04 /01 08/13 /05 000 914 61 55 02/02 /02 000 914 82 39 08/20 /02

08/25 /01 000 914 03 36 02/04 /01 000 914 16 35 01/02 /02 02/03 /02 000 914 82 40 08/20 /02

08/20 /01 000 914 03 37 02/04 /01 000 914 19 04 04/02 /01 000 914 61 56 02/02 /02 000 914 82 41 08/20 /02

000 912 95 27 08/20 /02 000 914 03 38 02/04 /01 000 914 20 12 02/04 /02 02/03 /02 000 915 90 14 08/14 /01

000 912 95 28 07/14 /02 000 914 03 39 02/04 /01 000 914 22 05 08/01 /03 000 914 61 57 02/02 /02 000 915 90 16 08/15 /02

000 913 01 01 05/06 /01 000 914 03 40 02/04 /02 08/11 /02 02/03 /02 000 915 90 36 08/05 /02

000 913 06 07 05/04 /01 000 914 03 42 02/04 /01 000 914 23 07 03/01 /02 000 914 61 58 02/02 /02 000 915 90 48 02/01 /02

000 913 12 04 05/01 /01 000 914 03 43 02/04 /01 000 914 23 11 08/02 /02 02/03 /02 000 916 02 00 02/02 /01

000 913 12 11 05/02 /01 000 914 03 44 02/04 /01 08/03 /03 000 914 65 19 02/01 /02 000 916 06 09 01/02 /01

000 914 03 01 02/04 /01 000 914 03 45 02/04 /01 08/13 /03 000 914 65 20 02/01 /02 000 916 09 22 03/02 /02

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

2 print no.1313 804 90 01 28.10.2009

Page 9: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 916 09 40 07/05 /01 07/13 /04 000 922 51 32 01/07 /02 000 924 93 50 08/24 /01 08/01 /01

000 916 09 41 07/05 /01 000 918 58 04 04/02 /03 000 922 60 12 05/02 /01 08/25 /01 08/02 /01

000 916 11 52 05/02 /02 000 918 71 22 07/08 /02 000 922 60 13 05/02 /01 000 924 93 51 08/20 /01 08/09 /01

000 916 17 07 01/02 /01 07/11 /02 000 922 66 02 02/06 /01 000 924 93 52 08/20 /01 000 924 95 06 08/07 /01

000 916 18 24 05/02 /01 000 918 71 50 05/05 /01 000 922 67 12 02/01 /02 000 924 94 04 08/03 /02 08/02 /01

000 916 20 22 03/01 /02 000 918 76 74 07/01 /01 000 923 40 31 02/02 /01 000 924 94 05 08/03 /02 08/01 /02

000 916 21 08 08/06 /01 000 921 05 13 02/06 /02 000 923 52 09 05/05 /01 000 924 94 06 08/03 /02 08/09 /01

000 916 50 58 01/07 /01 000 921 06 27 02/06 /01 000 924 50 39 02/01 /01 000 924 94 75 08/17 /01 000 924 96 02 08/01 /03

000 916 90 15 02/01 /02 000 921 08 24 02/02 /02 000 924 73 14 04/02 /01 08/13 /02 08/02 /04

000 916 90 16 02/01 /01 000 921 08 48 02/06 /02 000 924 73 97 04/02 /01 08/18 /01 08/03 /05

000 916 96 40 08/23 /01 000 921 12 35 02/08 /01 000 924 77 13 02/01 /01 08/12 /01 08/13 /05

000 916 96 41 07/14 /03 000 921 12 38 05/04 /01 000 924 77 14 02/01 /01 08/11 /02 08/20 /05

000 916 96 42 07/14 /03 000 921 13 10 02/05 /01 000 924 77 15 02/01 /02 000 924 94 76 08/17 /01 08/11 /03

000 916 96 50 02/01 /02 000 921 20 27 05/01 /01 000 924 77 16 02/01 /02 08/13 /02 08/12 /04

000 917 14 22 06/01 /02 000 921 20 76 02/06 /02 000 924 77 17 02/01 /02 08/18 /01 000 924 96 40 04/02 /02

000 917 18 29 04/01 /01 000 921 20 79 02/06 /02 000 924 77 18 02/01 /02 08/12 /01 000 926 42 12 07/14 /02

000 917 40 04 04/02 /01 000 921 26 52 08/05 /02 000 924 80 41 05/01 /01 08/11 /02 000 926 42 14 08/20 /03

000 918 25 00 05/04 /01 000 921 36 12 02/04 /02 05/02 /01 000 924 94 77 08/17 /01 000 926 42 19 07/14 /02

000 918 46 26 01/03 /02 000 921 36 62 02/06 /01 000 924 85 27 08/02 /02 08/13 /02 000 926 42 20 08/20 /02

000 918 46 37 08/20 /02 000 921 56 27 02/02 /01 08/03 /02 08/18 /02 000 926 42 21 08/20 /01

000 918 46 38 08/20 /01 02/03 /01 08/13 /02 08/12 /01 000 926 42 22 08/20 /01

000 918 50 08 05/02 /02 000 921 90 39 08/15 /02 08/12 /02 08/11 /02 000 928 03 41 04/02 /01

000 918 50 44 04/01 /02 000 921 93 22 08/23 /01 000 924 93 46 08/24 /01 000 924 95 04 08/07 /01 000 928 03 67 02/02 /01

000 918 53 41 03/06 /01 000 922 08 01 05/03 /01 08/25 /01 08/01 /01 02/03 /02

000 918 53 45 07/09 /03 000 922 10 00 01/07 /01 08/20 /01 08/02 /01 000 928 06 46 02/01 /02

07/12 /03 000 922 13 03 05/03 /01 000 924 93 48 08/24 /01 08/09 /01 000 928 06 47 02/01 /01

07/10 /04 000 922 17 02 05/01 /01 08/25 /01 000 924 95 05 08/07 /01 000 928 18 03 02/08 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 3

Page 10: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 928 20 00 02/01 /01 000 938 24 13 10/02 /01 000 938 46 31 10/02 /01 08/23 /01 000 950 22 11 06/06 /02

000 930 24 11 04/01 /01 000 938 24 14 10/02 /01 000 938 46 32 10/02 /02 000 940 13 07 08/21 /01 06/07 /01

000 931 01 42 05/04 /01 000 938 24 15 10/02 /01 000 938 46 33 10/02 /01 08/20 /03 000 950 22 18 05/06 /02

000 931 01 60 05/04 /01 000 938 29 13 10/02 /02 000 938 46 34 10/02 /01 000 941 60 00 10/011 /01 06/05 /02

000 931 01 66 06/01 /01 000 938 29 14 10/02 /02 000 938 46 35 10/02 /02 000 941 81 00 10/011 /01 06/12 /01

000 931 05 13 05/04 /01 000 938 46 00 10/02 /01 000 938 46 36 10/02 /02 000 941 91 15 06/05 /02 000 950 22 20 01/08 /01

000 931 05 14 05/04 /01 000 938 46 01 10/02 /01 000 938 46 37 10/02 /01 000 942 27 38 07/04 /01 000 950 22 32 06/10 /01

000 931 08 29 01/03 /02 000 938 46 02 10/02 /01 000 938 46 39 10/02 /02 000 944 05 18 02/01 /03 000 950 22 33 01/03 /02

000 931 30 58 08/13 /02 000 938 46 03 10/02 /01 000 938 46 41 10/02 /01 000 944 12 09 02/04 /02 06/06 /02

08/12 /02 000 938 46 05 10/02 /02 000 938 46 54 10/02 /02 000 944 13 57 01/04 /03 06/12 /01

000 931 38 31 03/02 /02 000 938 46 06 10/02 /02 000 938 46 64 10/02 /02 000 944 17 76 08/22 /01 07/05 /02

000 931 40 29 05/04 /02 000 938 46 07 10/02 /01 000 938 46 65 10/02 /03 000 944 22 49 01/04 /01 000 950 22 35 06/05 /02

000 931 40 33 03/03 /01 000 938 46 08 10/02 /02 000 938 46 66 10/02 /02 000 944 23 29 08/13 /05 000 950 22 36 07/05 /01

000 934 25 03 05/06 /01 000 938 46 11 10/02 /01 000 938 46 71 10/02 /02 08/12 /03 000 950 22 38 07/01 /01

000 935 03 68 05/02 /02 000 938 46 13 10/02 /01 000 938 46 75 10/02 /02 000 944 23 50 08/13 /02 000 950 22 45 01/04 /03

05/03 /01 000 938 46 14 10/02 /01 000 938 46 76 10/02 /02 08/12 /02 000 950 22 51 01/03 /02

000 936 32 24 03/02 /02 000 938 46 15 10/02 /01 000 938 46 88 10/02 /02 000 944 23 64 08/02 /02 000 950 22 52 07/04 /02

000 936 34 01 03/02 /02 000 938 46 16 10/02 /01 000 938 46 90 10/02 /02 08/03 /02 000 950 22 56 01/04 /03

000 937 01 09 06/02 /01 000 938 46 17 10/02 /02 000 938 55 29 10/02 /01 000 944 24 12 08/02 /04 000 950 22 62 07/05 /01

000 937 01 60 01/06 /01 000 938 46 18 10/02 /01 000 938 55 44 10/02 /02 08/03 /05 000 950 23 08 07/04 /02

000 938 06 62 10/02 /01 000 938 46 20 10/02 /02 000 938 55 74 10/02 /02 000 944 24 14 08/04 /01 000 950 23 15 01/03 /02

000 938 06 63 10/02 /01 000 938 46 21 10/02 /01 000 938 55 93 10/02 /02 08/05 /02 000 950 23 26 01/04 /03

000 938 08 41 10/02 /02 000 938 46 23 10/02 /02 000 938 55 94 10/02 /02 000 944 24 15 08/14 /01 000 950 23 27 01/03 /02

000 938 08 49 10/02 /03 000 938 46 24 10/02 /01 000 938 56 09 10/02 /03 08/15 /02 000 950 23 30 01/04 /03

000 938 08 50 10/02 /03 000 938 46 25 10/02 /01 000 938 56 10 10/02 /03 000 944 33 16 02/05 /01 000 951 01 42 01/01 /01

000 938 08 51 10/02 /03 000 938 46 27 10/02 /02 000 938 56 11 10/02 /03 000 946 08 11 06/01 /01 000 951 01 48 01/04 /01

000 938 24 12 10/02 /01 000 938 46 29 10/02 /01 000 940 13 06 08/21 /01 000 950 22 04 06/06 /02 000 951 04 13 01/04 /02

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

4 print no.1313 804 90 01 28.10.2009

Page 11: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 951 04 16 08/20 /03 000 951 55 07 01/04 /01 000 952 75 33 07/14 /01 000 955 08 15 04/01 /01 000 955 20 60 01/03 /02

000 951 19 26 01/03 /01 000 951 55 08 07/14 /03 08/25 /01 07/07 /01 07/04 /01

07/04 /01 000 951 64 04 01/06 /01 000 952 75 34 08/20 /03 000 955 08 41 07/01 /01 07/04 /02

000 951 19 35 01/04 /01 01/07 /02 000 952 75 38 08/23 /01 000 955 08 44 07/07 /01 07/10 /02

000 951 20 35 04/01 /02 01/07 /02 08/20 /02 000 955 08 68 07/01 /01 07/13 /02

07/04 /01 000 951 72 10 07/09 /03 000 955 01 04 08/02 /03 000 955 08 69 07/05 /01 000 955 20 62 01/01 /01

000 951 20 79 07/04 /01 07/12 /03 08/03 /05 000 955 09 37 01/08 /01 000 955 20 67 07/10 /02

000 951 21 10 07/08 /02 07/10 /04 08/13 /05 000 955 15 12 07/14 /01 07/13 /02

07/11 /02 07/13 /04 08/12 /03 000 955 15 13 07/14 /01 000 955 20 70 07/09 /02

000 951 21 44 01/04 /01 000 951 90 44 08/20 /03 000 955 02 19 08/02 /02 000 955 16 06 09/01 /01 07/12 /02

000 951 21 54 07/14 /03 000 951 94 04 08/25 /01 08/03 /02 000 955 16 27 07/14 /01 000 955 20 89 01/04 /03

000 951 21 55 08/20 /03 000 951 94 05 08/25 /01 000 955 03 11 01/08 /01 000 955 16 28 07/14 /01 000 955 21 79 07/08 /01

000 951 21 56 08/22 /01 000 952 07 16 01/04 /03 000 955 03 15 07/09 /02 000 955 20 09 01/03 /02 000 955 21 80 07/11 /01

08/20 /03 000 952 31 04 08/09 /01 07/12 /02 07/04 /01 000 955 21 89 01/08 /01

000 951 21 57 08/25 /01 08/10 /01 07/10 /03 07/04 /01 000 955 22 09 08/02 /01

000 951 21 63 08/22 /01 08/18 /01 07/13 /03 07/04 /02 08/05 /02

08/20 /02 08/19 /01 000 955 05 23 08/01 /03 000 955 20 31 01/01 /01 000 955 22 28 06/03 /01

000 951 24 86 07/08 /02 000 952 40 26 02/05 /01 08/04 /01 01/03 /02 000 955 22 66 01/06 /01

07/11 /02 02/06 /02 08/11 /03 07/04 /01 01/07 /02

000 951 33 20 01/04 /01 07/04 /02 000 955 05 24 08/14 /01 000 955 20 34 01/01 /01 000 955 22 78 08/13 /02

000 951 39 05 07/08 /02 000 952 40 29 02/02 /01 08/11 /03 000 955 20 36 01/03 /02 08/12 /02

07/11 /02 000 952 40 46 02/06 /02 000 955 06 02 07/09 /03 07/04 /01 08/15 /02

07/09 /03 02/06 /02 07/12 /03 000 955 20 37 07/10 /02 000 955 22 84 08/03 /02

07/12 /03 000 952 44 12 01/04 /01 07/10 /04 07/13 /02 08/05 /02

07/10 /04 000 952 75 18 01/06 /01 07/13 /04 000 955 20 54 01/03 /02 000 955 22 91 01/08 /01

07/13 /04 000 952 75 28 01/04 /02 000 955 07 08 01/04 /01 07/04 /01 000 955 24 04 08/20 /01

000 951 51 27 02/06 /02 000 952 75 29 01/07 /02 000 955 07 12 01/01 /01 07/04 /02 000 955 25 25 08/20 /02

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 5

Page 12: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 955 26 04 01/04 /03 000 957 06 04 01/06 /01 01/07 /01 000 962 24 10 08/05 /02 000 962 49 28 02/05 /01

06/05 /02 01/07 /02 01/07 /01 000 962 25 79 08/06 /01 000 962 50 10 03/04 /01

000 955 30 68 05/05 /01 000 960 81 22 08/16 /02 03/02 /02 000 962 25 97 08/16 /01 000 962 50 76 06/03 /01

05/04 /02 000 960 81 33 07/05 /01 000 962 01 06 09/01 /01 000 962 26 19 07/06 /01 000 962 55 23 02/08 /01

06/02 /01 000 960 81 49 07/05 /01 000 962 02 54 07/06 /01 000 962 26 28 04/02 /01 000 962 55 72 05/04 /01

06/04 /02 000 961 00 18 08/05 /03 000 962 02 86 05/04 /01 000 962 26 55 08/15 /02 000 962 55 88 05/04 /01

06/05 /02 000 961 00 19 08/06 /01 000 962 04 36 04/01 /02 000 962 26 56 08/04 /01 000 962 55 89 05/04 /01

06/06 /02 000 961 01 23 02/01 /03 07/04 /02 000 962 26 57 08/14 /01 000 962 65 01 03/02 /02

000 955 30 76 01/03 /02 000 961 01 24 02/01 /03 07/05 /02 000 962 27 53 02/05 /01 000 962 65 05 03/01 /02

01/08 /01 000 961 01 25 02/01 /03 07/05 /02 02/04 /02 000 962 65 06 06/01 /01

06/03 /02 000 961 01 26 02/01 /02 000 962 04 37 04/01 /01 000 962 29 08 08/16 /01 000 962 92 14 08/25 /01

07/04 /02 000 961 03 15 04/02 /01 07/05 /02 000 962 29 09 08/06 /01 000 962 92 21 08/23 /01

000 955 30 95 07/14 /01 000 961 04 31 04/02 /02 07/05 /02 000 962 33 13 07/06 /01 000 962 92 22 08/22 /01

000 955 36 06 07/08 /01 000 961 22 06 02/02 /02 000 962 04 38 04/01 /02 000 962 33 35 08/04 /01 000 962 92 23 08/21 /01

07/11 /01 07/04 /01 07/05 /01 000 962 33 36 08/15 /03 000 963 00 29 02/05 /01

07/09 /02 000 961 52 04 05/06 /02 07/05 /02 000 962 33 37 08/16 /01 02/06 /02

07/10 /02 000 961 91 57 01/04 /03 07/05 /02 000 962 33 38 08/06 /01 02/06 /02

07/12 /02 000 961 91 60 05/06 /01 000 962 04 39 07/04 /02 000 962 33 39 08/05 /03 07/02 /01

07/13 /02 000 961 91 89 01/04 /02 07/05 /01 000 962 36 12 08/15 /03 07/03 /01

000 955 50 01 01/04 /01 000 962 00 13 03/03 /01 07/05 /01 000 962 36 20 07/06 /01 000 963 00 38 02/02 /01

000 956 01 01 01/04 /01 000 962 00 16 03/03 /01 000 962 19 46 07/06 /01 000 962 36 26 08/16 /01 000 963 00 62 02/04 /03

01/04 /02 06/01 /01 000 962 19 80 08/15 /02 000 962 37 11 08/05 /03 000 963 01 07 07/02 /01

000 956 01 02 01/04 /01 000 962 01 00 08/02 /02 000 962 19 84 08/16 /01 000 962 38 29 02/04 /02 07/03 /01

000 956 01 08 01/04 /01 08/03 /03 000 962 19 85 08/05 /02 000 962 45 03 06/01 /02 000 963 02 38 07/02 /01

000 956 01 09 01/04 /01 08/13 /03 000 962 19 86 08/04 /01 000 962 45 16 02/01 /01 07/03 /01

000 957 06 00 01/06 /01 08/12 /02 000 962 19 87 08/06 /01 000 962 49 00 02/04 /02 000 963 02 65 02/08 /01

01/07 /02 000 962 01 03 01/07 /01 000 962 20 13 08/14 /01 000 962 49 01 02/04 /02 000 963 02 67 02/04 /03

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

6 print no.1313 804 90 01 28.10.2009

Page 13: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 963 03 08 08/05 /02 07/02 /01 000 964 03 44 06/08 /01 000 964 37 52 04/01 /01 000 973 29 49 05/04 /02

000 963 04 65 02/04 /02 07/02 /01 06/09 /01 000 964 38 09 01/07 /01 000 973 29 58 03/06 /01

000 963 06 09 08/16 /01 07/03 /01 000 964 05 03 05/01 /02 03/02 /02 000 973 30 33 05/05 /01

000 963 06 25 07/06 /01 07/03 /01 05/02 /02 000 964 42 06 09/01 /01 05/02 /02

000 963 08 05 02/06 /03 000 963 22 07 02/04 /03 000 964 10 29 05/01 /02 000 964 45 11 08/07 /01 000 973 43 13 10/011 /01

000 963 09 03 02/03 /01 000 963 22 08 02/05 /01 05/02 /02 08/09 /01 000 973 61 16 07/02 /01

000 963 10 74 07/04 /02 000 963 22 11 02/04 /02 07/04 /02 000 964 45 25 08/17 /01 07/03 /01

000 963 11 14 02/05 /01 000 963 22 16 02/05 /01 000 964 13 40 03/02 /01 08/18 /02 000 973 61 17 02/06 /02

000 963 11 16 07/04 /01 000 963 22 38 02/05 /01 000 964 15 68 01/04 /01 000 964 45 91 05/01 /01 000 973 61 24 07/02 /01

000 963 15 06 02/05 /01 000 963 22 49 02/04 /03 000 964 17 75 01/04 /01 05/02 /01 07/03 /01

000 963 20 31 02/05 /01 000 963 23 01 08/02 /02 000 964 17 76 01/04 /01 000 964 46 39 05/01 /01 000 973 61 30 02/06 /02

02/04 /02 08/03 /02 000 964 17 77 01/04 /01 000 964 67 01 08/20 /01 000 973 63 00 07/02 /01

000 963 20 41 02/06 /02 08/13 /02 000 964 17 78 01/04 /01 000 964 67 02 08/25 /01 07/03 /01

000 963 21 07 02/05 /01 08/12 /02 000 964 19 56 01/03 /03 000 965 22 01 03/02 /02 000 973 63 01 02/06 /02

000 963 21 14 02/06 /03 000 963 23 19 04/02 /01 000 964 19 62 07/08 /01 000 965 25 19 01/07 /01 07/02 /01

000 963 21 21 04/01 /02 000 963 23 29 02/06 /01 07/11 /01 000 965 26 27 07/04 /01 07/03 /01

07/04 /01 000 963 23 44 07/04 /02 000 964 23 48 04/01 /01 000 965 41 03 01/03 /01 000 973 63 09 02/06 /02

000 963 21 24 02/02 /02 000 963 24 33 08/15 /02 000 964 27 00 05/01 /01 000 965 41 66 07/01 /01 000 973 63 37 02/04 /03

07/04 /02 000 963 25 53 08/04 /01 05/02 /01 000 965 42 06 01/02 /02 000 973 90 05 06/07 /01

000 963 21 29 02/06 /01 000 963 26 07 08/14 /01 000 964 36 27 01/03 /01 000 965 42 15 01/02 /02 000 974 02 33 06/08 /01

000 963 21 49 02/06 /02 000 963 90 70 01/04 /02 000 964 36 29 01/03 /01 000 965 56 73 03/02 /01 000 974 04 43 06/08 /01

07/02 /01 000 963 90 85 02/01 /01 000 964 36 32 01/03 /01 000 965 56 80 05/05 /01 000 975 02 07 06/05 /01

07/02 /01 000 963 90 86 02/01 /01 000 964 36 33 01/03 /02 000 970 45 00 06/03 /01 000 975 02 10 06/04 /01

07/03 /01 000 964 01 22 04/02 /03 000 964 36 37 03/02 /01 000 972 17 06 01/05 /01 000 975 02 15 06/04 /01

07/03 /01 000 964 03 19 03/02 /01 000 964 37 18 04/03 /02 000 973 04 18 06/01 /01 000 975 15 25 06/04 /01

000 963 21 52 02/04 /03 000 964 03 43 06/08 /01 000 964 37 38 05/01 /01 000 973 13 15 06/02 /02 06/06 /01

000 963 21 63 02/06 /02 06/09 /01 05/02 /01 000 973 15 02 06/01 /01 000 975 17 38 06/11 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 7

Page 14: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

000 975 17 62 06/06 /02 000 980 31 00 01/04 /02 000 990 26 45 04/03 /01 08/25 /02 1313 116 08 00 01/03 /01

000 975 17 64 06/06 /02 000 981 04 48 01/03 /01 000 990 26 46 04/03 /01 08/20 /01 1313 116 08 01 01/03 /01

000 975 18 04 06/06 /01 000 981 22 05 02/04 /02 000 990 26 47 04/03 /01 002 978 05 11 06/04 /02 1313 116 08 02 03/01 /02

000 975 18 05 06/06 /01 000 982 08 45 01/03 /02 000 990 26 48 04/03 /01 06/05 /01 1313 116 80 00 01/03 /01

000 975 18 07 06/04 /01 000 982 21 01 01/04 /02 000 991 01 02 04/01 /01 06/06 /01 1313 170 10 00 01/01 /01

06/12 /01 000 983 08 63 07/05 /01 000 991 02 05 04/01 /01 06/10 /01 1313 172 01 00 01/08 /01

000 975 18 08 06/04 /01 000 983 08 76 07/05 /01 000 991 03 06 04/01 /01 06/11 /01 1313 172 15 00 01/08 /01

06/12 /01 000 983 16 64 07/05 /01 000 993 23 28 04/03 /01 06/09 /01 1313 173 11 00 01/01 /01

000 975 18 09 06/05 /01 000 983 16 78 07/04 /01 000 993 23 32 04/03 /01 010132 08/10 /01 1313 173 14 02 01/01 /01

000 975 18 10 06/05 /01 000 983 16 84 07/05 /01 000 993 35 00 08/02 /02 112985 03/05 /01 1313 173 18 00 01/01 /01

000 975 18 13 06/06 /01 000 983 17 01 01/01 /01 08/03 /02 113687 03/05 /01 1313 173 18 01 01/01 /01

000 975 18 14 06/05 /01 000 983 17 09 01/01 /01 000 993 36 00 08/01 /02 113753 03/05 /01 1313 173 19 02 01/08 /01

000 975 18 16 06/12 /01 000 983 20 78 01/01 /01 08/11 /02 1185638 03/05 /01 1313 210 01 06 01/02 /01

000 975 26 01 06/02 /01 000 983 20 94 01/01 /01 000 993 36 70 08/13 /02 125687 03/05 /01 1313 210 01 10 01/02 /01

000 975 26 04 06/05 /02 000 983 21 14 07/04 /01 08/12 /02 130106 03/05 /01 1313 210 01 11 01/02 /02

000 975 50 07 06/01 /01 000 983 81 11 01/01 /01 000 994 10 15 03/07 /01 1313 000 95 00 02/01 /01 1313 210 25 01 01/02 /02

000 975 50 09 06/04 /02 000 983 85 08 07/04 /01 000 994 10 29 03/07 /01 1313 006 30 68 06/02 /01 1313 220 01 00 01/02 /01

000 975 70 61 06/03 /01 000 983 97 07 07/04 /02 000 994 13 05 03/07 /01 1313 006 30 69 06/02 /01 1313 220 01 01 01/02 /01

000 975 71 12 06/01 /02 000 983 99 37 01/01 /01 002 903 02 00 08/06 /01 1313 107 05 00 01/03 /01 1313 231 14 03 01/02 /01

000 975 71 13 06/01 /01 000 990 26 06 04/03 /01 08/16 /01 1313 107 05 01 01/03 /01 1313 232 02 00 02/01 /01

000 975 75 99 06/03 /01 000 990 26 07 04/03 /01 002 905 90 37 08/24 /01 1313 108 40 03 01/03 /02 1313 232 02 01 02/01 /01

000 977 10 02 06/01 /01 000 990 26 08 04/03 /01 08/25 /02 1313 108 40 04 01/03 /02 1313 232 02 02 02/01 /01

000 977 28 20 01/05 /01 000 990 26 09 04/03 /01 08/20 /01 1313 108 40 05 01/03 /02 1313 251 12 00 02/01 /02

000 977 95 23 01/07 /02 000 990 26 31 04/03 /01 002 908 32 18 08/24 /01 1313 108 40 06 01/03 /02 1313 251 15 00 02/01 /02

000 978 50 00 01/02 /01 000 990 26 32 04/03 /01 08/25 /01 1313 110 05 00 01/03 /01 1313 253 10 00 02/01 /02

000 980 10 43 01/01 /01 000 990 26 33 04/03 /01 08/20 /01 1313 110 05 01 01/03 /01 1313 256 15 00 02/01 /02

000 980 10 57 01/01 /01 000 990 26 34 04/03 /01 002 908 32 19 08/24 /01 1313 115 00 00 01/03 /02 1313 260 03 00 01/02 /02

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

8 print no.1313 804 90 01 28.10.2009

Page 15: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

1313 260 03 01 02/01 /01 1313 381 03 06 06/11 /01 1313 410 40 17 08/20 /04 1313 432 03 04 03/04 /01 1313 440 17 06 08/22 /01

1313 260 35 00 02/01 /02 1313 381 03 07 06/11 /01 1313 420 60 03 07/04 /01 1313 432 42 00 06/02 /01 1313 440 17 07 08/22 /01

1313 262 60 00 01/02 /02 1313 381 03 09 06/12 /01 1313 430 06 00 03/02 /01 1313 432 42 04 01/01 /01 1313 440 17 08 08/22 /01

1313 264 08 00 02/01 /01 1313 381 03 11 06/03 /01 1313 430 09 00 03/02 /01 1313 432 42 05 03/02 /01 1313 440 17 09 08/22 /01

1313 264 08 01 02/01 /03 06/07 /01 1313 430 14 00 03/02 /01 1313 432 42 06 03/02 /01 1313 440 17 10 08/21 /01

1313 264 09 00 02/01 /01 1313 381 03 12 06/10 /01 1313 430 14 01 03/02 /01 1313 432 42 07 03/02 /01 1313 440 17 11 08/21 /01

1313 264 11 00 02/01 /03 1313 381 03 13 06/07 /01 1313 430 14 06 03/02 /01 1313 432 42 08 03/02 /01 1313 440 17 12 08/21 /01

1313 264 35 00 02/01 /01 1313 381 03 14 06/03 /01 1313 430 23 01 03/02 /01 1313 433 14 00 03/05 /01 1313 440 17 13 08/21 /01

1313 341 03 01 02/04 /03 06/07 /01 1313 430 30 02 03/01 /01 03/06 /01 1313 440 17 14 08/21 /01

1313 360 47 02 05/02 /02 1313 381 03 15 06/07 /01 1313 430 45 10 09/01 /01 1313 433 19 02 03/05 /01 1313 440 17 15 08/21 /01

1313 360 60 00 06/03 /02 1313 381 03 16 06/07 /01 1313 430 70 03 03/01 /01 1313 433 19 10 03/06 /01 1313 440 36 00 08/26 /01

1313 360 60 02 06/01 /01 1313 381 03 17 05/02 /02 1313 430 70 04 03/01 /01 1313 437 73 03 03/07 /01 1313 440 36 05 07/14 /03

1313 363 04 00 06/02 /01 1313 381 05 07 06/03 /01 1313 430 70 05 03/01 /01 1313 437 73 04 03/07 /01 07/14 /03

1313 363 12 01 01/03 /01 06/04 /01 1313 430 82 00 03/01 /01 1313 438 14 00 03/03 /01 1313 440 36 06 07/14 /03

1313 363 12 02 01/02 /02 06/05 /01 1313 430 82 04 03/07 /01 1313 438 14 01 03/03 /01 07/14 /03

1313 363 12 04 06/02 /01 06/06 /01 1313 430 99 00 10/011 /01 1313 438 18 03 03/03 /01 1313 440 36 07 07/14 /03

1313 363 12 06 06/02 /01 1313 400 30 15 03/01 /01 1313 430 99 01 10/011 /01 1313 440 14 00 08/20 /02 07/14 /03

1313 363 12 08 06/08 /01 1313 401 27 07 03/01 /02 1313 430 99 02 10/011 /01 1313 440 14 01 08/20 /03 1313 440 36 09 07/14 /03

1313 363 12 09 05/02 /02 1313 410 40 00 08/20 /03 1313 431 10 02 03/01 /02 1313 440 14 02 08/20 /03 07/14 /03

1313 363 12 10 05/02 /02 1313 410 40 07 08/20 /04 1313 431 10 03 03/01 /02 1313 440 17 00 08/23 /01 1313 440 40 01 08/20 /03

1313 363 12 11 06/03 /01 1313 410 40 08 08/20 /04 1313 431 15 01 05/01 /02 1313 440 17 01 08/23 /01 1313 440 40 02 08/20 /03

1313 363 18 00 06/01 /02 1313 410 40 09 08/20 /04 05/02 /01 08/23 /01 1313 440 40 03 08/20 /03

1313 363 19 00 06/02 /01 1313 410 40 11 08/20 /04 1313 431 30 00 03/04 /01 1313 440 17 02 08/23 /01 1313 440 40 04 08/20 /04

1313 363 19 01 06/02 /01 1313 410 40 12 08/20 /04 1313 431 30 01 03/04 /01 08/23 /01 1313 440 40 05 08/20 /04

1313 363 42 01 06/01 /01 1313 410 40 13 08/20 /04 1313 432 03 00 03/04 /01 1313 440 17 03 08/23 /01 1313 440 40 10 08/20 /04

1313 363 42 03 01/07 /01 1313 410 40 15 08/20 /04 1313 432 03 01 03/04 /01 1313 440 17 04 08/22 /01 1313 440 40 11 08/20 /04

1313 381 03 03 06/09 /01 1313 410 40 16 08/20 /04 1313 432 03 03 03/04 /01 1313 440 17 05 08/22 /01 1313 440 40 12 08/20 /04

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 9

Page 16: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

1313 440 40 14 08/20 /04 1313 441 32 15 07/01 /01 08/22 /01 1313 470 36 02 08/20 /05 1313 520 56 02 05/01 /01

1313 440 40 15 08/20 /04 1313 441 32 16 04/01 /01 1313 446 45 00 08/20 /01 08/20 /05 1313 520 56 05 05/02 /01

1313 440 40 16 08/20 /04 1313 441 32 17 04/01 /02 1313 448 54 00 07/14 /02 1313 470 36 03 08/20 /05 1313 520 63 02 05/01 /01

1313 440 41 06 08/20 /04 1313 441 40 00 07/05 /02 1313 448 54 01 07/14 /02 08/20 /05 1313 520 63 04 05/02 /01

1313 440 41 07 08/20 /04 1313 441 40 01 07/01 /02 07/14 /02 1313 470 36 04 08/20 /05 1313 527 03 04 05/06 /01

1313 440 41 08 08/20 /04 07/05 /02 1313 448 54 02 07/14 /02 1313 470 41 00 08/20 /05 1313 527 06 05 05/02 /01

1313 440 41 12 08/20 /05 1313 441 40 02 07/01 /02 07/14 /02 1313 470 41 01 08/20 /05 1313 527 06 06 05/06 /01

1313 440 48 00 08/20 /03 07/05 /01 07/14 /02 08/20 /05 1313 527 06 07 05/06 /01

1313 441 08 00 07/04 /01 1313 441 51 00 02/01 /03 1313 448 54 03 07/14 /02 1313 470 41 02 08/20 /05 1313 570 11 11 03/02 /01

1313 441 08 01 07/04 /01 1313 441 58 00 07/01 /01 1313 448 54 04 07/14 /02 08/20 /05 1313 570 11 13 03/02 /01

1313 441 08 02 07/04 /02 1313 441 58 02 07/01 /02 07/14 /02 1313 470 41 03 08/20 /05 1313 570 11 18 01/07 /01

1313 441 08 03 07/01 /02 1313 441 58 03 03/01 /02 1313 448 54 05 07/14 /02 1313 470 41 04 08/20 /04 1313 570 11 19 01/07 /01

07/04 /01 1313 441 58 04 03/01 /02 07/14 /02 1313 470 41 05 08/20 /04 1313 570 12 04 01/07 /01

1313 441 11 00 07/04 /02 1313 441 58 05 03/01 /01 07/14 /02 1313 470 41 06 08/20 /04 1313 570 12 05 01/07 /01

1313 441 32 04 07/01 /01 1313 445 05 00 08/20 /01 1313 448 54 06 07/14 /02 1313 470 41 07 08/20 /04 1313 570 17 00 01/04 /03

07/07 /01 1313 445 05 01 08/24 /01 1313 448 54 07 07/14 /02 1313 470 41 08 08/20 /04 1313 570 30 00 01/04 /03

1313 441 32 05 07/01 /02 08/25 /01 07/14 /02 1313 470 41 09 08/20 /04 1313 572 14 00 01/04 /02

07/07 /01 08/20 /01 1313 448 54 08 07/14 /02 1313 470 41 10 08/20 /04 1313 572 18 01 01/04 /01

1313 441 32 06 04/01 /01 1313 445 05 02 08/20 /02 07/14 /02 1313 470 41 11 08/20 /05 1313 572 20 00 01/04 /01

1313 441 32 07 07/01 /01 1313 445 05 03 08/20 /01 07/14 /02 08/20 /05 1313 572 27 00 01/04 /01

1313 441 32 08 07/01 /01 1313 445 05 04 08/20 /02 1313 448 54 09 07/14 /01 1313 470 41 12 08/20 /05 1313 572 27 01 01/04 /01

1313 441 32 09 07/05 /02 1313 446 24 00 07/14 /01 1313 448 54 10 07/14 /01 1313 470 41 13 08/20 /05 1313 574 10 00 01/04 /02

1313 441 32 10 07/01 /01 1313 446 25 00 07/14 /01 07/14 /02 1313 500 30 00 02/01 /01 1313 574 10 02 01/04 /03

1313 441 32 11 07/05 /01 1313 446 25 01 07/14 /01 1313 448 54 11 07/14 /02 1313 504 21 00 02/01 /01 1313 581 01 02 01/08 /01

1313 441 32 12 07/05 /02 1313 446 25 02 07/14 /01 07/14 /02 1313 520 26 00 05/01 /01 1313 610 08 01 03/02 /01

1313 441 32 13 07/05 /01 1313 446 41 00 08/23 /01 07/14 /02 1313 520 26 05 05/02 /01 1313 611 30 02 03/01 /01

1313 441 32 14 07/05 /01 1313 446 41 01 08/21 /01 1313 470 36 01 08/20 /05 1313 520 56 00 05/01 /01 1313 613 03 11 03/01 /01

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

10 print no.1313 804 90 01 28.10.2009

Page 17: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

1313 613 03 13 03/01 /01 08/18 /01 1509 410 20 07 08/02 /01 07/13 /02 1509 448 34 52 08/03 /04

1313 613 03 15 03/01 /01 1508 446 56 00 08/09 /01 08/03 /01 1509 441 12 00 08/01 /02 1509 448 34 53 08/03 /04

1313 613 03 17 03/01 /01 08/18 /01 1509 410 20 08 08/03 /01 1509 441 12 01 08/02 /03 1509 448 34 54 08/03 /04

1313 613 07 00 03/02 /01 1508 446 56 01 08/09 /01 1509 410 20 09 08/02 /01 08/03 /05 1509 448 34 55 08/03 /04

1313 613 44 00 06/02 /01 08/18 /01 1509 410 36 00 08/03 /01 1509 446 06 00 08/01 /02 1509 448 34 56 08/03 /04

1313 808 58 01 01/03 /02 1509 410 10 00 08/01 /01 1509 410 36 01 08/03 /01 08/04 /01 1509 448 34 57 08/03 /04

131 440 36 10 07/14 /03 1509 410 10 01 08/01 /01 1509 410 36 02 08/03 /01 1509 446 63 00 08/02 /04 1509 448 34 58 08/03 /04

132796 03/05 /01 1509 410 10 02 08/01 /01 1509 410 36 03 08/03 /01 1509 448 34 00 08/03 /03 1509 448 34 59 08/03 /04

1508 430 72 00 08/08 /01 1509 410 10 03 08/01 /01 1509 410 36 04 08/03 /01 1509 448 34 01 08/03 /03 1509 448 34 60 08/03 /04

1508 430 72 03 08/08 /01 1509 410 10 04 08/01 /01 1509 410 36 05 08/03 /01 1509 448 34 02 08/03 /03 1509 448 34 61 08/03 /04

1508 440 68 00 08/09 /01 1509 410 10 05 08/01 /01 1509 410 36 06 08/03 /01 1509 448 34 03 08/03 /03 1509 448 34 62 08/03 /04

08/18 /01 1509 410 10 06 08/01 /01 1509 410 36 07 08/03 /01 1509 448 34 04 08/03 /03 1509 448 34 63 08/03 /04

1508 440 91 05 08/09 /01 1509 410 10 07 08/01 /01 1509 410 36 08 08/03 /01 1509 448 34 05 08/03 /03 1509 448 34 64 08/03 /04

08/18 /01 1509 410 10 08 08/01 /01 1509 440 24 00 07/10 /04 1509 448 34 06 08/03 /03 1509 448 34 65 08/03 /04

1508 441 07 01 08/09 /01 1509 410 10 09 08/01 /01 1509 440 24 01 07/10 /04 1509 448 34 07 08/03 /03 1509 448 34 66 08/03 /04

08/18 /01 1509 410 20 00 08/02 /01 1509 440 24 02 07/10 /04 1509 448 34 08 08/03 /03 1509 448 34 67 08/03 /04

1508 441 36 00 08/09 /01 08/03 /01 1509 440 24 03 07/10 /04 1509 448 34 09 08/03 /03 1509 448 41 00 08/02 /03

08/18 /01 1509 410 20 01 08/02 /01 1509 440 24 04 07/10 /04 1509 448 34 10 08/03 /03 1509 448 41 02 08/02 /03

1508 446 10 01 08/09 /01 08/03 /01 1509 440 24 05 07/10 /04 1509 448 34 11 08/03 /03 1509 448 41 03 08/02 /03

08/18 /01 1509 410 20 02 08/02 /01 1509 440 24 06 07/10 /04 1509 448 34 12 08/03 /04 1509 448 41 04 08/09 /02

1508 446 10 02 08/09 /01 08/03 /01 1509 440 63 01 08/09 /01 1509 448 34 13 08/03 /04 1509 448 41 05 08/09 /02

08/18 /01 1509 410 20 03 08/03 /01 1509 440 63 02 08/09 /01 1509 448 34 14 08/03 /04 1509 490 50 00 07/08 /01

1508 446 25 04 08/09 /01 1509 410 20 04 08/02 /01 1509 440 91 00 08/07 /01 1509 448 34 15 08/03 /04 1509 490 50 01 07/08 /01

08/18 /01 08/03 /01 1509 440 91 01 08/07 /01 1509 448 34 16 08/03 /04 1509 490 50 02 07/08 /01

1508 446 27 00 08/09 /01 1509 410 20 05 08/03 /01 1509 440 98 00 08/09 /01 1509 448 34 17 08/03 /04 1509 490 50 03 07/08 /01

08/18 /01 1509 410 20 06 08/02 /01 1509 440 98 01 08/09 /01 1509 448 34 50 08/03 /04 1509 490 50 04 07/08 /01

1508 446 37 00 08/09 /01 08/03 /01 1509 441 09 01 07/10 /02 1509 448 34 51 08/03 /04 1509 490 50 05 07/08 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 11

Page 18: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

1509 490 50 06 07/08 /01 07/10 /02 1510 410 20 05 08/13 /01 1510 440 91 04 08/18 /01 1510 448 34 17 08/13 /04

1509 490 50 07 07/08 /01 1509 490 50 31 07/09 /01 08/12 /01 1510 440 98 00 08/18 /01 1510 448 34 26 08/13 /04

1509 490 50 08 07/08 /01 07/10 /02 1510 410 20 06 08/13 /01 1510 440 98 01 08/18 /01 1510 448 34 35 08/13 /04

1509 490 50 09 07/08 /01 1509 490 50 32 07/09 /01 08/12 /01 1510 440 98 02 08/18 /01 1510 448 34 36 08/12 /03

1509 490 50 10 07/10 /01 1509 490 50 33 07/09 /01 1510 410 20 07 08/13 /01 1510 440 98 03 08/18 /01 1510 448 34 37 08/12 /03

1509 490 50 11 07/10 /01 07/10 /02 08/12 /01 1510 441 12 00 08/11 /03 1510 448 34 38 08/12 /03

1509 490 50 12 07/10 /01 1509 490 50 34 07/09 /01 1510 410 20 08 08/13 /01 1510 441 12 01 08/13 /05 1510 448 34 39 08/12 /03

1509 490 50 13 07/10 /01 07/10 /02 1510 410 25 00 08/12 /01 08/12 /01 1510 448 34 40 08/12 /03

1509 490 50 14 07/10 /01 1510 410 10 00 08/11 /01 1510 410 25 01 08/12 /01 1510 446 56 00 08/18 /01 1510 448 34 41 08/12 /03

1509 490 50 15 07/10 /01 1510 410 10 01 08/11 /01 1510 410 36 00 08/13 /01 1510 446 56 01 08/18 /01 1510 448 34 42 08/12 /03

1509 490 50 16 07/10 /01 1510 410 10 02 08/11 /01 1510 410 36 01 08/13 /01 1510 448 34 00 08/13 /03 1510 448 34 43 08/12 /03

1509 490 50 17 07/10 /01 1510 410 10 03 08/11 /01 1510 410 36 02 08/13 /01 1510 448 34 01 08/13 /03 1510 448 34 44 08/12 /03

1509 490 50 18 07/10 /01 1510 410 10 04 08/11 /01 1510 410 36 03 08/13 /01 1510 448 34 02 08/13 /03 1510 448 34 45 08/12 /03

1509 490 50 19 07/10 /01 1510 410 10 05 08/11 /01 1510 410 36 04 08/13 /01 1510 448 34 03 08/13 /03 1510 448 34 46 08/12 /03

1509 490 50 20 07/10 /01 1510 410 10 06 08/11 /01 1510 410 36 05 08/13 /01 1510 448 34 04 08/13 /03 1510 448 34 47 08/12 /03

1509 490 50 21 07/10 /01 1510 410 10 07 08/11 /01 1510 410 36 06 08/13 /01 1510 448 34 05 08/13 /03 1510 448 34 48 08/12 /03

1509 490 50 22 07/10 /01 1510 410 10 08 08/11 /01 1510 410 36 07 08/13 /01 1510 448 34 06 08/13 /03 1510 448 34 49 08/12 /03

1509 490 50 23 07/10 /01 1510 410 10 09 08/11 /01 1510 410 36 08 08/13 /01 1510 448 34 07 08/13 /03 1510 448 34 50 08/13 /04

1509 490 50 24 07/10 /01 1510 410 20 00 08/13 /01 1510 440 63 02 08/18 /01 1510 448 34 08 08/13 /03 1510 448 34 51 08/13 /04

1509 490 50 25 07/10 /01 08/12 /01 1510 440 63 03 08/18 /01 1510 448 34 09 08/13 /03 1510 448 34 52 08/13 /04

1509 490 50 26 07/10 /01 1510 410 20 01 08/13 /01 1510 440 63 04 08/18 /01 1510 448 34 10 08/13 /03 1510 448 34 53 08/13 /04

1509 490 50 27 07/10 /01 08/12 /01 1510 440 63 05 08/18 /01 1510 448 34 11 08/13 /03 1510 448 34 54 08/13 /04

1509 490 50 28 07/09 /01 1510 410 20 02 08/13 /01 1510 440 71 00 08/18 /01 1510 448 34 12 08/13 /04 1510 448 34 55 08/13 /04

07/10 /02 1510 410 20 03 08/13 /01 1510 440 91 00 08/17 /01 1510 448 34 13 08/13 /04 1510 448 34 56 08/13 /04

1509 490 50 29 07/09 /01 08/12 /01 1510 440 91 01 08/17 /01 1510 448 34 14 08/13 /04 1510 448 34 57 08/13 /04

07/10 /02 1510 410 20 04 08/13 /01 1510 440 91 02 08/17 /01 1510 448 34 15 08/13 /04 1510 448 34 59 08/13 /04

1509 490 50 30 07/09 /01 08/12 /01 1510 440 91 03 08/17 /01 1510 448 34 16 08/13 /04 1510 448 34 60 08/13 /04

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

12 print no.1313 804 90 01 28.10.2009

Page 19: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

1510 448 34 61 08/13 /04 1510 490 50 17 07/11 /01 07/13 /02 183 410 15 22 08/01 /01 08/03 /02

1510 448 34 62 08/13 /04 1510 490 50 18 07/11 /01 1510 490 50 42 07/12 /01 183 440 21 01 08/02 /02 08/13 /02

1510 448 34 63 08/13 /04 1510 490 50 19 07/11 /01 07/13 /02 08/03 /02 08/12 /02

1510 448 34 64 08/13 /04 1510 490 50 20 07/11 /01 1510 490 50 43 07/12 /01 08/13 /02 183 446 45 02 08/13 /02

1510 448 34 65 08/13 /04 1510 490 50 21 07/11 /01 07/13 /02 08/12 /02 08/12 /02

1510 448 34 66 08/13 /04 1510 490 50 22 07/11 /01 1510 490 50 45 07/12 /01 183 440 25 00 07/09 /02 183 446 45 03 08/02 /02

1510 448 41 02 08/18 /02 1510 490 50 23 07/11 /01 07/13 /02 07/12 /02 08/03 /02

1510 448 41 03 08/18 /02 1510 490 50 24 07/11 /01 1510 490 50 46 07/12 /01 07/10 /03 183 446 55 03 08/01 /03

1510 448 41 04 08/18 /02 1510 490 50 25 07/11 /01 07/13 /02 07/13 /03 08/11 /02

1510 448 41 05 08/18 /02 1510 490 50 26 07/09 /01 153631 08/10 /01 183 440 25 02 07/09 /02 183 446 55 05 08/01 /02

1510 490 50 00 07/13 /01 07/12 /01 164 446 55 09 08/13 /03 07/12 /02 08/11 /02

1510 490 50 01 07/13 /01 1510 490 50 27 07/09 /01 08/12 /03 07/10 /03 183 446 63 16 08/13 /04

1510 490 50 02 07/13 /01 07/12 /01 180 441 58 00 07/09 /02 07/13 /03 183 446 63 27 08/12 /03

1510 490 50 03 07/13 /01 1510 490 50 28 07/12 /01 07/10 /04 183 441 15 00 07/10 /02 183 446 63 29 08/03 /04

1510 490 50 04 07/13 /01 1510 490 50 29 07/09 /01 180 441 58 01 07/09 /03 183 441 15 11 07/13 /02 185 410 25 00 08/02 /01

1510 490 50 05 07/13 /01 07/12 /01 07/10 /03 183 441 58 24 07/13 /02 185 410 25 02 08/02 /01

1510 490 50 06 07/13 /01 1510 490 50 30 07/12 /01 180 446 55 04 08/02 /03 183 446 09 00 08/02 /01 185 410 25 03 08/02 /01

1510 490 50 07 07/13 /01 1510 490 50 31 07/09 /01 08/03 /03 08/01 /02 185 410 25 05 08/02 /01

1510 490 50 08 07/13 /01 1510 490 50 32 07/09 /01 183 410 15 00 08/01 /01 183 446 14 01 08/07 /01 185 410 25 07 08/02 /01

1510 490 50 09 07/13 /01 07/12 /01 183 410 15 02 08/01 /01 08/17 /01 185 410 25 08 08/02 /01

1510 490 50 10 07/13 /01 1510 490 50 33 07/09 /01 183 410 15 03 08/01 /01 08/09 /01 185 410 25 10 08/02 /01

1510 490 50 11 07/13 /01 07/12 /01 183 410 15 05 08/01 /01 08/18 /02 185 410 33 00 08/03 /01

1510 490 50 12 07/13 /01 1510 490 50 34 07/13 /01 183 410 15 06 08/01 /01 183 446 14 12 08/07 /01 185 410 33 02 08/03 /01

1510 490 50 13 07/13 /01 1510 490 50 35 07/13 /01 183 410 15 07 08/01 /01 08/17 /01 185 410 33 03 08/03 /01

1510 490 50 14 07/13 /01 1510 490 50 40 07/12 /01 183 410 15 08 08/01 /01 08/09 /01 185 410 33 04 08/03 /01

1510 490 50 15 07/13 /01 07/13 /02 183 410 15 11 08/01 /01 08/18 /02 185 410 33 05 08/03 /01

1510 490 50 16 07/11 /01 1510 490 50 41 07/12 /01 183 410 15 15 08/01 /01 183 446 24 00 08/02 /02 185 410 33 06 08/03 /02

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 13

Page 20: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

185 410 33 08 08/03 /02 185 448 41 06 08/02 /03 186 440 24 10 07/10 /02 186 440 24 46 07/13 /04 186 440 45 15 07/09 /02

185 410 33 10 08/03 /02 185 448 41 08 08/02 /03 07/13 /03 186 440 24 47 07/13 /04 07/12 /02

185 410 33 11 08/03 /02 185 448 41 16 08/02 /03 186 440 24 11 07/10 /03 186 440 24 48 07/13 /04 186 440 46 26 07/13 /04

185 440 52 75 08/06 /01 185 448 41 18 08/02 /03 07/13 /03 186 440 24 49 07/13 /04 186 440 77 00 07/09 /01

185 440 52 76 08/06 /01 185 448 41 20 08/02 /03 186 440 24 12 07/10 /03 186 440 24 50 07/13 /04 07/12 /01

185 440 52 77 08/06 /01 185 448 41 22 08/02 /03 07/13 /03 186 440 24 51 07/13 /04 186 440 77 02 07/09 /02

185 440 52 78 08/06 /01 185 448 41 24 08/02 /03 186 440 24 13 07/10 /03 186 440 25 25 07/13 /03 07/12 /02

185 440 52 79 08/06 /01 186 410 15 00 08/11 /01 07/13 /03 186 440 45 04 07/10 /02 186 441 06 01 07/08 /02

185 440 52 80 08/06 /01 186 410 15 02 08/11 /01 186 440 24 14 07/10 /03 07/13 /02 07/11 /02

185 440 52 82 08/06 /01 186 410 15 03 08/11 /01 07/13 /03 186 440 45 05 07/10 /02 186 441 15 01 07/12 /03

185 440 52 83 08/06 /01 186 410 15 05 08/11 /01 186 440 24 15 07/10 /03 07/13 /02 07/13 /04

185 441 58 01 07/10 /02 186 410 15 06 08/11 /01 07/13 /03 186 440 45 06 07/10 /02 186 441 15 02 07/12 /02

185 445 05 00 08/02 /02 186 410 15 08 08/11 /01 186 440 24 22 07/10 /03 07/13 /02 07/13 /04

08/03 /03 186 410 15 11 08/11 /01 07/13 /03 186 440 45 07 07/10 /02 186 441 48 00 07/09 /01

185 446 11 00 08/05 /02 186 410 15 15 08/11 /01 186 440 24 23 07/10 /03 07/13 /02 07/12 /01

08/15 /02 186 410 15 22 08/11 /01 07/13 /03 186 440 45 08 07/10 /02 186 441 48 01 07/09 /01

185 446 12 00 08/05 /02 186 410 15 77 08/11 /01 186 440 24 24 07/10 /03 07/13 /02 07/12 /01

08/15 /02 186 440 17 27 08/16 /01 07/13 /03 186 440 45 10 07/09 /02 186 441 48 02 07/09 /01

185 446 12 02 08/06 /01 186 440 17 29 08/16 /01 186 440 24 25 07/10 /03 07/12 /02 07/12 /01

185 446 25 08 07/09 /03 186 440 17 31 08/16 /01 186 440 24 26 07/10 /03 186 440 45 11 07/09 /02 186 441 48 03 07/09 /01

07/10 /03 186 440 17 32 08/16 /01 07/13 /03 07/12 /02 07/12 /01

185 446 63 08 08/02 /04 186 440 17 33 08/16 /01 186 440 24 29 07/10 /03 186 440 45 12 07/09 /02 186 441 58 15 07/09 /02

185 446 63 09 08/03 /04 186 440 17 34 08/16 /01 07/13 /03 07/12 /02 07/12 /02

185 446 63 10 08/03 /05 186 440 17 35 08/16 /01 186 440 24 31 07/10 /03 186 440 45 13 07/09 /02 186 441 58 18 07/10 /02

185 448 41 00 08/02 /03 186 440 17 38 08/16 /01 07/13 /03 07/12 /02 07/13 /02

185 448 41 02 08/02 /03 186 440 17 40 08/16 /01 186 440 24 32 07/10 /03 186 440 45 14 07/09 /02 186 446 09 00 08/03 /02

185 448 41 04 08/02 /03 186 440 17 41 08/16 /01 07/13 /03 07/12 /02 186 446 09 57 08/13 /02

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

14 print no.1313 804 90 01 28.10.2009

Page 21: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

08/12 /01 188 410 33 01 08/13 /01 2201 323 05 02 * 02/03 /02 263 343 51 08 02/04 /02 302 000 25 16 04/02 /01

08/11 /02 188 410 33 02 08/13 /01 2204 000 25 01 01/02 /02 263 343 51 09 02/04 /02 302 450 13 08 04/02 /02

186 446 09 97 08/16 /01 188 410 33 03 08/13 /02 233 320 04 03 02/03 /01 263 345 04 01 02/04 /02 302 450 15 02 04/02 /01

186 446 12 12 08/16 /01 188 410 33 05 08/13 /02 253 301 40 03 02/04 /02 264 343 05 00 02/05 /01 302 450 90 00 04/02 /01

186 446 16 00 07/08 /01 188 410 33 07 08/13 /02 253 323 14 06 02/02 /01 264 343 38 01 02/04 /02 302 450 90 01 04/02 /01

07/11 /01 188 410 33 08 08/13 /02 253 323 20 13 02/02 /01 293 320 08 04 02/02 /01 302 450 90 03 04/02 /02

08/01 /02 188 410 33 28 08/13 /01 253 343 18 11 02/02 /01 02/03 /01 302 451 04 02 04/02 /01

08/11 /02 188 410 33 29 08/13 /01 253 343 25 01 02/02 /01 293 323 05 01 02/02 /01 302 452 18 08 04/02 /02

186 446 25 07 08/03 /05 188 446 12 01 08/15 /02 253 343 25 02 02/02 /01 293 323 14 03 02/03 /01 302 453 02 16 04/02 /01

08/13 /05 188 446 25 16 07/12 /03 253 343 25 03 02/02 /01 293 323 31 08 02/03 /01 302 453 03 03 04/02 /01

186 446 25 08 07/08 /01 07/13 /03 253 343 25 11 02/02 /01 293 323 31 09 02/03 /01 302 453 03 04 04/02 /01

07/11 /01 188 446 63 00 08/13 /04 253 343 25 12 02/02 /01 293 323 31 10 02/03 /01 302 454 02 04 04/02 /01

186 446 25 09 07/08 /01 188 446 63 01 08/13 /05 253 343 25 13 02/02 /01 293 323 31 11 02/03 /01 302 490 20 02 04/02 /02

07/11 /01 188 446 63 04 08/12 /03 262 343 38 01 02/02 /02 293 323 31 12 02/03 /01 302 540 42 24 04/02 /02

186 446 26 03 07/08 /01 2048213 03/05 /01 262 345 35 00 02/02 /02 293 324 02 06 02/03 /02 331 446 09 00 07/06 /01

07/11 /01 2048259 03/05 /01 263 305 12 28 02/04 /02 293 343 51 06 02/03 /01 335 433 11 02 05/04 /01

186 446 41 09 08/16 /01 2048665 03/05 /01 263 320 04 05 02/02 /01 300 363 12 00 05/05 /01 335 433 34 01 05/04 /01

186 446 55 01 08/13 /03 2048666 03/05 /01 263 323 01 05 02/02 /01 300 363 12 01 05/05 /01 335 433 34 03 05/04 /01

08/12 /02 2201 000 95 01 02/07 /01 263 324 02 07 02/02 /02 300 365 25 04 10/011 /01 335 433 56 06 03/02 /01

186 446 93 03 08/14 /01 2201 232 47 03 02/03 /02 263 343 18 08 02/02 /01 300 430 11 00 05/05 /01 335 433 56 08 05/04 /01

08/11 /03 2201 264 24 01 02/03 /01 263 343 51 01 02/04 /02 300 430 26 01 05/05 /01 05/04 /02

188 410 25 01 08/12 /01 2201 300 03 01 02/05 /01 263 343 51 02 02/04 /02 300 430 82 00 05/04 /01 335 433 62 04 05/04 /01

188 410 25 02 08/12 /01 2201 301 00 04 02/02 /01 263 343 51 03 02/04 /02 300 430 82 01 05/05 /01 335 437 94 00 05/04 /01

188 410 25 03 08/12 /01 2201 320 99 00 02/07 /01 263 343 51 04 02/04 /02 300 433 05 02 03/06 /01 335 527 30 06 05/01 /01

188 410 25 05 08/12 /01 2201 323 01 01 02/03 /01 263 343 51 05 02/04 /02 300 436 34 02 05/05 /01 335 527 30 07 05/01 /01

188 410 25 07 08/12 /01 2201 323 01 02 * 02/03 /01 263 343 51 06 02/04 /02 300 446 11 11 07/06 /01 342 454 03 00 04/02 /02

188 410 33 00 08/13 /01 2201 323 05 01 02/03 /02 263 343 51 07 02/04 /02 300 527 46 00 05/06 /01 346 360 66 00 06/08 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 15

Page 22: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

06/08 /01 346 448 31 12 07/14 /03 386 433 80 02 03/06 /01 392 363 19 01 06/02 /01 5170 490 80 03 07/06 /01

346 363 01 00 06/08 /01 346 448 31 13 07/14 /03 386 433 85 00 03/06 /01 392 363 19 02 06/02 /01 5171 470 10 05 08/15 /02

346 363 18 01 06/08 /01 07/14 /03 390 360 10 19 06/02 /01 392 363 42 30 05/04 /02 5171 470 10 17 08/05 /02

346 363 18 02 06/08 /01 346 448 31 14 07/14 /03 390 360 15 97 06/02 /01 392 381 03 35 06/07 /01 5172 440 00 02 08/05 /01

346 381 03 00 06/09 /01 07/14 /03 390 360 51 12 10/011 /01 392 381 03 81 05/04 /02 5172 440 79 13 08/15 /01

346 433 10 00 03/05 /01 346 448 31 15 08/25 /01 390 360 51 18 06/02 /02 06/09 /01 5172 440 79 14 08/15 /01

346 440 57 00 08/20 /03 346 448 31 18 08/20 /03 390 382 01 00 10/011 /01 392 430 14 16 05/04 /01 5172 440 79 15 08/15 /01

346 440 66 02 08/25 /01 346 775 34 00 08/25 /01 390 382 01 01 10/011 /01 392 430 82 59 09/01 /01 5172 440 79 16 08/15 /01

346 445 05 00 08/20 /01 347 440 91 23 08/10 /01 391 030 15 04 01/02 /01 392 431 19 00 05/01 /01 5172 440 79 17 08/15 /01

346 445 34 00 08/24 /01 08/19 /01 391 363 12 20 01/05 /01 392 433 14 05 03/06 /01 5172 440 79 18 08/15 /01

346 446 10 00 08/25 /01 08/26 /01 391 510 01 02 05/03 /01 392 433 56 03 05/04 /01 5172 440 79 19 08/15 /01

346 446 11 00 08/23 /01 350 527 13 05 05/01 /01 391 510 04 02 05/03 /01 392 433 75 00 03/06 /01 5172 440 79 20 08/15 /01

346 446 14 00 08/20 /02 350 527 46 01 05/01 /01 391 520 00 00 05/06 /01 392 527 18 18 05/06 /01 5172 440 79 21 08/15 /01

346 446 14 02 08/24 /01 05/02 /01 391 540 13 00 04/01 /01 392 527 19 06 05/06 /01 5172 440 79 23 08/05 /01

346 446 22 00 08/25 /01 350 527 47 00 05/01 /01 391 543 16 00 03/03 /01 392 527 36 08 05/01 /02 5172 440 79 24 08/05 /01

346 446 24 01 07/14 /01 05/02 /01 391 543 16 01 03/03 /01 392 542 12 05 04/01 /01 5172 440 79 25 08/05 /01

346 446 24 02 08/25 /01 05/06 /01 391 543 22 06 04/01 /01 392 543 31 00 04/01 /01 5172 440 79 26 08/05 /01

346 446 25 00 08/20 /02 351 423 02 00 06/03 /01 391 543 22 10 04/01 /02 392 571 20 47 01/07 /01 5172 440 79 27 08/05 /01

346 446 25 01 08/20 /03 386 381 03 95 03/06 /01 391 570 17 06 01/04 /02 393 430 95 07 01/02 /02 5172 440 79 28 08/05 /01

346 446 25 04 07/14 /01 386 433 10 00 03/06 /01 391 572 13 00 01/04 /02 393 439 10 01 10/02 /02 5172 440 79 29 08/05 /01

346 446 41 01 08/25 /01 386 433 10 01 03/06 /01 391 572 27 00 01/04 /02 393 440 99 05 08/19 /01 5172 440 79 30 08/05 /02

346 446 56 00 08/25 /01 386 433 14 00 03/06 /01 392 105 01 01 01/03 /01 5060 433 26 02 03/06 /01 5172 440 79 31 08/05 /02

3464 480 31 04 07/14 /03 386 433 14 01 03/06 /01 392 115 08 21 01/03 /01 506 301 36 02 02/06 /01 5172 440 79 32 08/05 /01

346 448 14 01 08/20 /02 386 433 14 02 03/06 /01 392 230 64 01 02/02 /02 506 323 19 02 02/06 /03 5172 440 79 33 08/15 /01

346 448 31 03 07/14 /03 386 433 18 00 03/06 /01 392 232 22 00 01/02 /01 5170 490 80 00 07/06 /01 5172 440 79 34 08/04 /01

346 448 31 04 07/14 /03 386 433 80 00 03/06 /01 392 363 04 06 06/02 /01 5170 490 80 01 07/06 /01 5172 440 79 35 08/04 /01

346 448 31 11 07/14 /03 386 433 80 01 03/06 /01 392 363 12 01 06/02 /01 5170 490 80 02 07/06 /01 5172 440 79 36 08/04 /01

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

16 print no.1313 804 90 01 28.10.2009

Page 23: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

5172 440 79 37 08/04 /01 5176 440 52 67 08/15 /02 5178 440 53 34 08/05 /01 584 345 03 49 02/06 /01 7 7777 00 071 05/04 /02

5172 440 79 38 08/04 /01 5176 440 52 68 08/15 /02 5178 440 53 35 08/05 /01 584 345 04 16 02/06 /01 7 7777 00 217 02/02 /02

5172 440 79 39 08/04 /01 5176 440 52 69 08/15 /02 5178 440 53 36 08/05 /01 584 345 10 05 02/06 /02 7 7777 01 063 04/02 /02

5172 440 79 40 08/04 /01 5176 440 52 70 08/15 /02 5178 440 53 37 08/05 /01 584 345 10 10 02/06 /02 7 9106 00 056 06/06 /01

5172 440 79 41 08/04 /01 5176 440 52 71 08/15 /02 5178 440 53 38 08/05 /01 584 345 21 06 02/06 /01 06/11 /01

5172 440 79 42 08/04 /01 5176 440 52 72 08/05 /02 5178 440 53 39 08/05 /01 599 320 95 00 02/04 /01 7 9110 00 223 06/01 /01

5172 440 79 43 08/14 /01 5176 440 52 73 08/05 /02 5178 440 53 40 08/05 /01 600 340 50 25 02/05 /01 7 9125 00 250 06/07 /01

5172 440 79 44 08/14 /01 5176 440 52 74 08/05 /02 5178 440 53 41 08/05 /01 674 340 61 11 02/08 /01 7 9125 00 257 06/07 /01

5172 440 79 45 08/14 /01 5176 440 52 75 08/05 /02 5178 440 53 42 08/05 /01 05/02 /02 7 9125 01 120 06/06 /02

5172 440 79 46 08/14 /01 5176 440 52 76 08/05 /02 5178 440 53 43 08/15 /01 674 341 01 03 02/08 /01 7 9125 01 121 06/06 /02

5172 440 79 47 08/14 /01 5176 440 52 77 08/05 /02 5178 440 62 20 08/05 /01 674 343 38 03 02/08 /01 7 9125 02 128 06/07 /01

5172 440 79 48 08/14 /01 5176 440 52 78 08/05 /02 584 340 37 55 02/06 /01 674 343 38 04 02/08 /01 7 9125 03 005 06/12 /01

5172 440 79 49 08/14 /01 5176 440 52 79 08/05 /02 584 340 70 11 02/06 /01 674 345 04 04 02/08 /01 7 9125 03 020 06/05 /01

5172 470 00 01 08/04 /01 5176 440 52 80 08/05 /02 584 343 38 13 02/06 /01 680 000 75 70 07/03 /01 7 9125 03 024 04/01 /01

5172 470 00 03 08/14 /01 5176 440 53 41 08/06 /01 584 343 38 15 02/06 /01 680 000 75 71 07/03 /01 7 9125 03 035 06/04 /01

5172 470 00 04 08/14 /01 5176 440 53 42 08/06 /01 584 343 38 16 02/06 /01 680 000 76 10 07/02 /01 06/12 /01

5172 470 00 05 08/14 /01 5176 446 12 09 08/05 /03 584 343 38 17 02/06 /01 680 000 76 11 07/02 /01 7 9125 03 036 06/04 /01

5172 470 10 20 08/14 /01 5178 440 53 22 08/15 /01 584 343 38 18 02/06 /01 680 343 24 12 07/02 /01 7 9125 03 038 06/04 /01

5172 470 10 21 08/04 /01 5178 440 53 23 08/15 /01 584 343 38 19 02/06 /01 07/03 /01 7 9125 03 039 06/04 /01

5172 470 10 33 08/06 /01 5178 440 53 24 08/15 /01 584 343 38 67 02/06 /02 685 340 57 00 07/02 /01 7 9125 03 041 06/04 /01

5176 345 03 01 08/15 /02 5178 440 53 25 08/15 /01 584 343 55 45 02/06 /01 07/03 /01 7 9125 03 042 06/04 /01

08/05 /03 5178 440 53 26 08/15 /01 584 343 57 10 02/06 /01 685 340 57 01 02/06 /02 7 9125 03 050 06/09 /01

08/06 /01 5178 440 53 27 08/15 /01 584 343 63 02 02/06 /01 685 340 57 03 02/06 /02 7 9125 03 057 06/05 /01

5176 440 52 63 08/15 /02 5178 440 53 28 08/15 /01 584 343 63 04 02/06 /01 685 340 57 04 07/02 /01 06/12 /01

5176 440 52 64 08/15 /02 5178 440 53 29 08/15 /01 584 345 02 02 02/06 /01 07/03 /01 7 9125 03 072 06/04 /01

5176 440 52 65 08/15 /02 5178 440 53 30 08/15 /01 584 345 03 31 02/06 /02 7 0331 49 015 04/03 /02 06/05 /01

5176 440 52 66 08/15 /02 5178 440 53 33 08/05 /01 584 345 03 32 02/06 /02 7 7244 00 000 10/01 /01 06/06 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 17

Page 24: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

06/12 /01 06/09 /01 7 9125 03 753 05/04 /02 7 9125 11 365 06/09 /01 7 9125 33 502 06/04 /02

7 9125 03 073 06/05 /01 7 9125 03 151 06/11 /01 06/06 /01 7 9125 11 366 06/06 /02 7 9125 33 503 06/04 /02

7 9125 03 080 06/04 /02 7 9125 03 186 06/07 /01 06/07 /01 06/09 /01 7 9125 33 702 06/04 /02

7 9125 03 081 06/04 /02 7 9125 03 230 06/09 /01 06/09 /01 7 9125 11 369 06/06 /02 7 9125 33 706 06/04 /02

7 9125 03 095 06/05 /01 7 9125 03 314 06/02 /01 7 9125 03 802 06/05 /01 7 9125 12 005 06/02 /02 7 9133 02 401 06/05 /02

7 9125 03 101 06/06 /02 06/04 /01 7 9125 03 811 06/09 /01 06/04 /01 7 9149 50 940 06/09 /01

06/11 /01 06/12 /01 7 9125 03 815 06/06 /01 06/07 /01 7 9149 90 749 06/08 /01

7 9125 03 112 06/04 /02 7 9125 03 320 06/04 /02 06/10 /01 06/10 /01 06/09 /01

7 9125 03 121 06/06 /02 7 9125 03 322 06/04 /02 7 9125 03 816 06/11 /01 06/11 /01 7 9149 90 752 03/01 /02

7 9125 03 123 06/05 /01 7 9125 03 342 06/04 /01 7 9125 03 817 06/10 /01 06/12 /01 07/07 /01

06/06 /02 7 9125 03 350 06/09 /01 7 9125 03 819 06/05 /02 7 9125 15 005 06/05 /02 7 9149 90 753 07/01 /01

7 9125 03 124 06/06 /01 7 9125 03 404 06/02 /01 7 9125 03 835 06/06 /01 7 9125 15 535 06/05 /01 07/07 /01

7 9125 03 125 06/06 /01 06/12 /01 06/07 /01 7 9125 15 556 06/09 /01 7 9149 96 000 06/04 /02

7 9125 03 133 06/04 /01 7 9125 03 413 06/04 /01 7 9125 03 850 06/06 /02 7 9125 30 040 06/04 /01 7 9149 96 015 06/04 /02

7 9125 03 134 06/04 /01 7 9125 03 420 06/05 /01 7 9125 03 856 06/07 /01 7 9125 33 013 06/05 /02 7 9149 99 014 06/06 /01

7 9125 03 140 06/04 /02 7 9125 03 423 06/05 /01 7 9125 03 893 06/09 /01 7 9125 33 086 06/04 /01 7 9149 99 016 06/09 /01

06/05 /02 06/12 /01 7 9125 03 920 06/04 /01 7 9125 33 090 06/04 /01 7 9149 99 017 06/04 /01

06/06 /01 7 9125 03 442 06/10 /01 7 9125 03 923 06/04 /01 7 9125 33 113 06/07 /01 06/05 /01

7 9125 03 145 06/05 /01 7 9125 03 453 06/11 /01 06/12 /01 7 9125 33 136 06/12 /01 06/06 /01

06/06 /01 7 9125 03 454 06/02 /02 7 9125 06 051 06/05 /02 7 9125 33 137 06/06 /01 06/07 /01

06/09 /01 7 9125 03 462 05/04 /02 7 9125 06 053 06/05 /02 7 9125 33 211 06/05 /02 06/10 /01

7 9125 03 146 06/05 /01 06/07 /01 06/07 /01 7 9125 33 231 06/05 /02 06/11 /01

06/06 /01 7 9125 03 621 06/06 /02 7 9125 06 071 06/05 /02 7 9125 33 239 06/06 /01 06/12 /01

06/10 /01 7 9125 03 689 06/06 /02 7 9125 11 115 06/04 /01 7 9125 33 323 06/05 /01 7 9149 99 019 05/04 /02

06/09 /01 7 9125 03 720 06/05 /02 06/06 /01 7 9125 33 330 06/05 /02 06/04 /02

7 9125 03 147 06/11 /01 7 9125 03 752 06/06 /02 06/11 /01 7 9125 33 339 06/06 /01 06/05 /01

7 9125 03 149 05/04 /02 06/09 /01 7 9125 11 315 06/06 /02 7 9125 33 387 06/09 /01 06/06 /01

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

18 print no.1313 804 90 01 28.10.2009

Page 25: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

06/07 /01 06/05 /01 7 9174 15 649 01/04 /02 9 007 316 617 03/01 /01 07/10 /03

06/10 /01 06/06 /02 7 9189 15 246 06/08 /01 9 008 311 045 05/02 /02 07/12 /03

06/11 /01 06/12 /01 7 9190 40 043 05/04 /01 9 008 311 098 06/01 /01 07/13 /03

06/09 /01 7 9149 99 904 06/05 /01 7 9190 40 044 05/04 /01 9 008 311 105 05/02 /02 07/10 /04

7 9149 99 020 06/04 /02 06/12 /01 7 9190 52 604 06/08 /01 9 008 311 126 04/01 /02 07/13 /04

06/05 /02 7 9149 99 994 06/05 /02 7 9190 86 803 06/02 /01 9 008 311 128 06/02 /01 08/01 /02

06/06 /01 7 9150 06 016 06/04 /02 7 9190 86 804 06/02 /01 06/03 /01 08/01 /02

06/09 /01 7 9150 06 061 06/05 /01 7 9190 86 805 06/02 /01 06/03 /01 08/02 /02

7 9149 99 021 06/05 /02 7 9150 91 930 06/06 /01 7 9190 86 806 06/02 /01 9 008 311 132 03/01 /01 08/02 /03

7 9149 99 023 05/04 /02 06/07 /01 7 9190 86 807 06/02 /02 03/01 /02 08/02 /03

06/07 /01 7 9154 90 603 06/01 /01 7 9190 95 045 06/05 /02 03/03 /01 08/03 /03

06/09 /01 7 9154 90 623 06/01 /01 7 9190 95 046 06/05 /02 9 008 311 135 01/07 /01 08/13 /03

7 9149 99 024 06/02 /02 7 9154 91 014 01/04 /03 7 9190 95 056 06/05 /01 9 008 311 140 05/01 /01 08/03 /05

06/06 /01 7 9154 91 021 01/01 /01 7 9190 95 258 01/08 /01 9 008 311 174 06/03 /01 08/03 /05

06/07 /01 7 9154 92 632 06/01 /01 7 9195 64 945 06/08 /01 9 008 311 175 03/01 /01 08/13 /05

06/11 /01 7 9154 98 510 06/01 /01 7 9199 00 223 06/03 /01 06/01 /01 08/13 /05

06/12 /01 7 9160 40 010 06/05 /02 801 08/10 /01 9 008 311 177 01/02 /02 08/11 /02

7 9149 99 025 05/04 /02 7 9160 40 017 06/05 /02 08/26 /01 05/01 /02 08/12 /02

06/04 /02 7 9160 90 701 06/04 /01 86601069 03/05 /01 05/05 /01 08/11 /03

06/05 /01 7 9162 91 264 06/02 /02 9 007 311 197 03/02 /03 06/01 /01 08/12 /03

06/06 /01 7 9164 00 104 05/06 /01 06/01 /02 06/03 /02 08/12 /04

06/07 /01 7 9164 00 159 05/01 /02 9 007 311 306 08/07 /01 07/05 /02 9 008 311 180 01/03 /01

06/10 /01 05/02 /01 9 007 311 308 08/17 /01 07/09 /02 03/01 /01

06/09 /01 7 9164 51 536 05/02 /02 9 007 311 420 01/02 /02 07/09 /02 03/06 /01

7 9149 99 033 06/05 /01 7 9172 99 010 10/011 /01 9 007 311 422 01/02 /02 07/12 /02 06/03 /01

06/12 /01 7 9174 15 511 07/04 /02 9 007 316 144 02/04 /03 07/12 /02 07/01 /01

7 9149 99 901 06/02 /02 7 9174 15 613 01/07 /01 9 007 316 535 08/20 /05 07/09 /03 07/01 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 19

Page 26: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

07/08 /02 9 008 311 233 04/01 /01 9 008 316 196 07/05 /01 07/09 /03 08/11 /03

07/08 /02 9 008 311 236 01/02 /02 9 008 316 197 03/07 /01 07/12 /03 9 045 316 128 01/03 /02

07/09 /02 07/04 /01 9 008 316 413 03/01 /01 07/10 /04 03/03 /01

07/11 /02 9 008 311 239 01/07 /01 9 008 316 611 03/01 /01 07/13 /04 03/07 /01

07/11 /02 03/02 /01 9 008 610 069 10/01 /01 08/02 /03 9 045 316 131 01/07 /01

07/12 /02 07/09 /02 9 010 312 305 04/02 /03 08/03 /05 01/07 /01

07/10 /03 07/10 /02 9 010 317 445 03/01 /02 08/13 /05 9 045 316 138 01/04 /03

07/13 /03 07/12 /02 9 026 316 099 01/04 /02 08/09 /02 07/02 /01

08/02 /02 07/13 /02 9 027 068 142 05/01 /01 08/18 /02 07/03 /01

08/03 /02 07/10 /03 9 027 117 146 09/01 /01 9 045 311 239 07/04 /02 9 045 316 142 07/10 /02

08/13 /02 07/13 /03 9 027 316 188 08/03 /05 9 045 311 261 02/04 /02 07/13 /02

08/12 /02 9 008 311 243 01/02 /01 08/13 /05 9 045 316 042 06/01 /01 07/02 /01

9 008 311 183 01/01 /01 9 008 311 244 01/02 /02 9 031 316 127 01/04 /02 9 045 316 074 05/01 /01 07/03 /01

01/06 /01 05/01 /02 9 031 316 129 01/04 /02 05/01 /01 9 045 316 143 01/04 /02

01/07 /02 05/02 /01 9 045 311 135 07/08 /01 05/02 /01 01/05 /01

03/02 /02 9 008 311 293 01/03 /01 07/11 /01 05/06 /01 9 045 316 183 06/08 /01

03/06 /01 9 008 311 295 03/02 /02 07/09 /02 9 045 316 096 05/03 /01 07/08 /01

05/01 /02 9 008 311 298 03/01 /01 07/10 /02 9 045 316 097 03/02 /02 07/11 /01

05/02 /02 9 008 311 300 01/02 /01 07/12 /02 9 045 316 098 06/08 /01 07/10 /03

05/06 /01 01/07 /01 07/13 /02 9 045 316 102 05/06 /02 07/13 /03

9 008 311 186 01/01 /01 03/02 /01 9 045 311 177 02/03 /01 9 045 316 125 05/05 /01 9 045 316 186 01/04 /02

9 008 311 188 07/05 /01 08/08 /01 03/07 /01 9 045 316 126 02/06 /01 9 045 316 190 01/02 /02

9 008 311 193 07/09 /03 08/08 /01 06/03 /01 07/08 /01 03/02 /02

07/12 /03 9 008 311 302 03/02 /02 07/09 /03 07/11 /01 9 045 316 195 01/02 /02

07/10 /04 04/02 /02 07/12 /03 08/01 /02 08/02 /02

07/13 /04 9 008 311 411 01/02 /02 9 045 311 180 06/08 /01 08/01 /03 08/03 /02

9 008 311 195 04/01 /01 9 008 313 422 03/01 /01 06/08 /01 08/11 /02 08/13 /02

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

20 print no.1313 804 90 01 28.10.2009

Page 27: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

08/12 /02 9 048 348 183 02/02 /01 9 113 604 379 03/03 /01 07/05 /01 05/02 /01

9 045 316 201 03/02 /02 02/06 /03 9 119 526 379 05/03 /01 07/05 /01 05/06 /01

9 045 316 247 01/02 /02 9 048 348 236 02/03 /02 9 124 311 180 07/01 /01 07/05 /01 05/06 /01

9 045 316 298 01/03 /02 9 048 350 180 08/02 /02 9 124 311 256 02/08 /01 07/05 /02 05/06 /01

01/04 /01 08/01 /03 9 124 311 298 07/01 /01 9 170 281 160 07/05 /01 06/03 /01

05/04 /01 08/03 /02 9 133 339 140 05/01 /01 9 186 353 069 06/08 /01 07/09 /02

9 045 316 300 01/08 /01 08/13 /02 05/02 /01 9 186 353 237 06/01 /01 07/12 /02

9 045 316 318 01/02 /01 08/12 /02 9 133 339 142 07/02 /01 9 186 353 300 05/04 /01 07/10 /03

9 045 316 372 01/02 /01 08/11 /03 07/03 /01 9 208 056 090 01/07 /01 07/13 /03

9 045 316 411 01/02 /01 08/11 /03 9 133 339 172 08/01 /03 9 208 156 186 08/02 /02 08/03 /05

9 045 316 414 04/02 /03 9 062 311 129 05/04 /01 08/02 /03 08/03 /03 08/13 /05

9 045 316 535 08/01 /03 9 062 311 178 01/06 /01 08/03 /05 08/13 /03 9 210 281 130 01/03 /01

08/02 /04 9 062 311 183 03/01 /02 08/13 /05 08/12 /02 03/02 /02

08/03 /05 03/02 /02 08/11 /03 9 210 281 070 05/02 /02 05/01 /02

08/13 /05 05/01 /02 08/12 /04 9 210 281 090 01/02 /01 05/01 /02

08/11 /03 05/02 /02 9 133 339 193 05/02 /01 01/05 /01 05/02 /01

08/12 /04 9 062 316 132 05/04 /01 9 133 341 143 01/02 /01 01/07 /02 05/02 /02

9 045 341 180 08/12 /04 9 078 316 066 04/01 /02 9 148 010 196 02/05 /01 05/01 /01 06/03 /01

9 045 341 243 05/06 /01 9 090 316 180 03/02 /02 9 148 011 176 02/06 /01 05/02 /01 07/04 /01

9 045 341 311 02/05 /01 9 090 318 180 03/01 /02 07/01 /02 06/03 /02 07/09 /02

9 045 346 295 07/06 /01 9 090 347 241 03/05 /01 07/07 /01 09/01 /01 07/10 /02

9 045 348 186 02/06 /03 9 090 356 178 03/05 /01 9 170 281 060 04/01 /02 9 210 281 110 01/03 /01 07/12 /02

9 045 355 298 08/07 /01 03/06 /01 07/05 /02 01/04 /02 07/13 /02

08/17 /01 07/09 /02 9 170 281 080 04/01 /01 01/07 /01 07/10 /03

08/09 /02 07/12 /02 07/05 /02 03/01 /02 07/13 /03

08/18 /02 9 098 610 183 05/05 /01 07/05 /02 03/01 /02 9 210 281 140 04/02 /02

9 045 374 168 01/02 /01 9 110 604 493 05/04 /02 9 170 281 130 04/01 /02 03/02 /02 07/01 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 21

Page 28: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

08/07 /01 9 265 316 090 06/02 /01 08/03 /02 03/02 /02 01/04 /02

08/17 /01 9 265 316 110 03/02 /01 08/09 /01 07/09 /02 01/05 /01

08/08 /01 03/06 /01 9 289 600 513 08/02 /01 07/12 /02 01/07 /01

9 210 311 166 08/01 /02 06/03 /02 08/01 /02 9 291 003 022 01/02 /01 03/01 /01

08/11 /02 07/01 /01 08/03 /02 01/02 /01 03/03 /01

9 210 311 186 08/02 /02 9 265 316 130 06/03 /01 08/09 /01 01/03 /01 03/03 /01

08/03 /03 07/04 /01 9 289 600 516 08/02 /01 03/02 /01 03/07 /01

08/13 /03 9 270 341 176 04/02 /01 08/01 /02 03/02 /02 05/01 /01

08/12 /02 04/03 /02 08/03 /02 9 291 003 028 01/02 /02 05/05 /01

9 210 341 218 07/06 /01 9 273 209 186 07/08 /02 08/09 /01 9 291 003 033 04/01 /01 05/04 /02

9 211 281 166 08/01 /02 07/11 /02 9 289 600 582 08/17 /01 08/01 /03 06/03 /01

08/11 /02 9 289 003 010 02/05 /01 08/13 /02 08/02 /04 06/03 /01

9 211 281 176 04/01 /01 9 289 003 013 02/05 /01 08/18 /02 08/03 /05 06/03 /02

9 212 341 176 04/02 /01 9 289 003 109 02/06 /03 08/11 /01 08/13 /05 07/08 /01

9 214 317 090 05/01 /01 9 289 003 110 02/06 /03 08/12 /01 08/20 /05 07/11 /01

9 214 317 130 04/01 /01 9 289 003 580 02/03 /01 9 289 600 583 08/17 /01 08/11 /03 07/09 /02

9 214 317 140 01/07 /01 02/02 /02 08/13 /02 08/12 /04 07/10 /02

9 214 317 166 04/02 /01 9 289 003 582 02/03 /01 08/18 /02 9 291 429 022 01/03 /02 07/12 /02

9 215 317 110 03/06 /01 02/02 /02 08/11 /01 01/04 /01 07/13 /02

9 243 281 090 07/02 /01 9 289 003 586 02/03 /01 08/12 /01 07/01 /01 9 292 003 018 01/02 /02

07/03 /01 02/02 /02 9 289 600 586 08/17 /01 9 292 003 010 05/01 /01 01/03 /01

9 243 281 110 02/06 /01 9 289 600 227 08/02 /04 08/13 /02 05/02 /01 01/04 /02

9 243 281 134 07/02 /01 08/03 /05 08/18 /02 05/06 /01 03/02 /02

07/03 /01 08/13 /05 08/12 /01 06/01 /01 03/02 /02

9 243 281 140 02/05 /01 08/12 /03 08/11 /02 9 292 003 012 05/03 /01 03/06 /01

07/05 /02 9 289 600 512 08/02 /01 9 291 003 020 01/02 /02 06/01 /01 03/07 /01

9 265 316 070 06/03 /01 08/01 /02 01/02 /02 9 292 003 014 01/03 /02 04/01 /01

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

22 print no.1313 804 90 01 28.10.2009

Page 29: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

05/01 /02 08/01 /03 05/02 /01 05/02 /02 08/12 /02

06/01 /01 08/02 /03 05/06 /01 9 308 003 020 04/01 /01 08/12 /03

06/03 /02 08/03 /02 9 292 425 020 07/04 /01 05/01 /02 9 309 412 020 03/02 /01

06/08 /01 08/13 /02 9 292 430 020 01/02 /02 05/02 /02 05/01 /02

07/08 /01 08/03 /03 9 294 003 012 03/02 /02 9 309 003 020 01/07 /01 05/02 /02

07/11 /01 08/13 /03 9 294 003 018 01/01 /01 9 309 412 012 03/03 /01 07/10 /02

07/08 /02 08/03 /05 01/06 /01 06/08 /01 07/13 /02

07/08 /02 08/03 /05 01/07 /02 10/01 /01 07/10 /03

07/09 /02 08/03 /05 03/02 /02 9 309 412 014 03/02 /02 07/13 /03

07/09 /02 08/13 /05 06/01 /02 9 309 412 018 01/04 /02 9 309 412 022 03/01 /01

07/09 /02 08/13 /05 06/03 /01 01/08 /01 08/07 /01

07/11 /02 08/13 /05 06/03 /01 03/01 /02 08/17 /01

07/11 /02 08/09 /02 06/03 /01 03/01 /02 08/08 /01

07/12 /02 08/18 /02 07/05 /01 06/03 /01 9 309 412 028 01/02 /01

07/12 /02 08/12 /02 07/05 /02 07/01 /01 03/01 /01

07/12 /02 08/12 /02 9 294 003 020 01/02 /01 07/01 /01 03/01 /01

07/09 /03 08/11 /03 01/03 /01 07/09 /03 08/01 /02

07/09 /03 08/11 /03 04/01 /01 07/12 /03 08/11 /02

07/10 /03 08/11 /03 05/06 /01 07/10 /04 9 310 003 022 01/04 /02

07/10 /03 08/12 /03 07/04 /02 07/13 /04 03/02 /01

07/12 /03 08/12 /04 9 294 003 022 05/03 /01 08/02 /02 07/01 /01

07/12 /03 9 292 009 017 01/01 /01 9 305 003 014 02/04 /03 08/02 /03 9 311 600 020 06/03 /01

07/13 /03 01/02 /01 9 307 003 014 03/01 /02 08/02 /03 07/04 /01

07/13 /03 03/01 /01 09/01 /01 08/03 /02 9 311 608 038 03/01 /01

08/01 /02 03/01 /01 9 308 003 018 01/03 /02 08/13 /02 9 323 620 018 06/03 /02

08/02 /02 03/02 /03 03/01 /02 08/03 /05 9 323 620 022 01/07 /01

08/02 /02 03/07 /01 03/02 /02 08/13 /05 01/07 /02

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 23

Page 30: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

9 330 620 018 06/01 /01 08/13 /02 9 495 104 055 08/13 /03 9 495 116 047 08/02 /02 08/02 /04

9 371 600 363 02/05 /01 08/12 /01 08/12 /02 08/03 /03 08/03 /05

9 380 620 257 04/02 /02 9 455 622 247 08/01 /02 08/12 /03 9 495 116 049 08/02 /02 08/03 /05

9 380 620 322 08/02 /03 08/11 /01 9 495 104 059 08/13 /03 08/03 /03 08/13 /05

08/03 /05 9 456 622 214 02/08 /01 08/12 /03 9 495 116 051 08/02 /02 08/13 /05

08/13 /05 9 456 622 505 02/03 /01 9 495 104 061 08/13 /03 08/03 /03 08/20 /05

08/12 /04 02/02 /02 08/12 /03 9 495 116 053 08/02 /02 08/11 /03

9 380 620 328 08/01 /03 9 456 622 534 02/03 /02 9 495 110 075 08/01 /02 08/03 /03 08/11 /03

08/11 /03 9 456 622 552 02/02 /01 9 495 110 079 08/01 /02 9 495 116 055 08/02 /02 08/12 /04

9 380 620 419 01/03 /02 9 460 620 040 05/03 /01 9 495 110 081 08/01 /02 9 495 116 057 08/02 /03 9 636 801 037 08/04 /01

01/04 /02 9 464 620 060 02/08 /01 08/11 /02 08/03 /03 08/14 /01

07/01 /01 9 464 620 257 08/05 /02 9 495 110 085 08/01 /02 9 495 116 059 08/02 /03 08/05 /02

9 381 660 312 02/02 /02 9 464 621 220 05/06 /02 08/11 /02 08/03 /03 08/15 /02

9 381 660 370 02/01 /02 9 464 621 240 02/08 /01 9 495 110 087 08/01 /02 9 509 000 675 02/03 /01 08/16 /01

9 381 660 466 02/01 /01 9 495 040 030 08/02 /02 08/11 /02 02/02 /02 08/06 /02

9 381 660 478 08/07 /01 08/03 /03 9 495 110 089 08/01 /02 9 509 000 731 02/02 /01 9 721 000 009 07/06 /01

08/17 /01 08/13 /03 9 495 110 091 08/11 /02 02/03 /01 9 721 002 010 04/01 /01

08/09 /01 08/12 /02 9 495 110 093 08/01 /02 9 512 092 305 07/06 /01 04/02 /02

08/18 /02 9 495 103 926 08/01 /02 08/11 /02 9 516 003 202 02/06 /02 9 721 002 015 01/03 /01

9 384 620 317 04/02 /02 08/11 /02 08/11 /02 9 576 930 409 09/01 /01 07/05 /02

9 384 620 450 02/06 /03 08/11 /02 9 495 110 097 08/11 /02 9 607 021 060 04/02 /02 9 721 002 062 07/01 /01

9 384 621 744 04/02 /02 9 495 104 049 08/13 /03 9 495 110 099 08/01 /03 07/05 /02 07/01 /01

9 385 600 326 02/03 /01 08/12 /02 9 495 110 103 08/11 /02 9 607 021 080 07/06 /02 07/01 /01

9 387 620 385 07/06 /01 9 495 104 051 08/13 /03 9 495 110 109 08/01 /03 07/06 /02 07/07 /01

9 455 622 113 02/06 /03 08/12 /02 9 495 110 113 08/11 /02 08/01 /01 9 721 010 018 07/01 /01

9 455 622 167 08/02 /01 9 495 104 053 08/13 /03 9 495 110 123 08/01 /03 08/02 /01 07/05 /01

08/03 /02 08/12 /02 9 495 110 127 08/11 /03 08/01 /03 07/05 /02

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

24 print no.1313 804 90 01 28.10.2009

Page 31: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

9 758 003 091 08/09 /02 VW032121142 00/08 /01 VW050121113C 00/06 /01 VW06A109105C 00/09 /01 VW06A198401E 00/02 /01

08/18 /02 VW035103379 00/03 /01 VW051103483A 00/03 /01 00/04 /01 VW06A903141P 00/10 /01

9 758 025 070 05/03 /01 VW035911299B 00/12 /01 VW053105229A 00/02 /01 VW06A109108T 00/09 /01 VW06A903315E 00/10 /01

9 796 470 060 05/06 /01 VW037103139 00/01 /01 VW056103397 00/03 /01 VW06A109119C 00/09 /01 VW06B103154 00/01 /01

9 798 311 041 05/06 /01 VW037103139A 00/01 /01 VW056103591 00/03 /01 VW06A109129A 00/09 /01 VW06B103623P 00/01 /01

9 815 200 287 04/03 /01 VW037103419B 00/03 /01 VW059919501A 00/08 /01 VW06A109147F 00/09 /01 VW06B105561 00/02 /01

9 815 200 288 04/03 /01 VW037121142A 00/07 /01 VW068115723 00/07 /01 VW06A109150 00/09 /01 VW06B115611R 00/05 /01

9 815 200 366 04/03 /01 VW037121688 00/08 /01 VW068911024F 00/12 /01 VW06A109175B 00/09 /01 VW06D103634E 00/05 /01

9 815 200 367 04/03 /01 VW037145291 00/11 /01 VW068911024GX 00/12 /01 VW06A109479F 00/09 /01 00/01 /01

9 815 265 287 04/03 /01 VW037903181 00/11 /01 VW068911287H 00/12 /01 VW06A109601E 00/04 /01 VW06D105701A 00/02 /01

9 815 265 288 04/03 /01 VW038103085C 00/03 /01 VW06A103171A 00/01 /01 VW06A115105B 00/05 /01 VW06D105701K 00/02 /01

9 815 265 366 04/03 /01 VW038103085E 00/01 /01 VW06A103175 00/07 /01 VW06A115125 00/05 /01 VW06G103011B 00/01 /01

9 815 265 367 04/03 /01 VW038103151H 00/01 /01 VW06A103351P 00/03 /01 00/05 /01 VW06G103383A 00/03 /01

9 815 283 287 04/03 /01 VW038103196 00/01 /01 VW06A103384C 00/03 /01 VW06A115130 00/05 /01 VW077105425E 00/02 /01

9 815 283 288 04/03 /01 VW038117070A 00/07 /01 VW06A103475C 00/03 /01 VW06A115405BP 00/07 /01 VW078109623C 00/04 /01

9 815 283 366 04/03 /01 VW038121119B 00/06 /01 VW06A103483D 00/03 /01 00/05 /01 VW078109641C 00/04 /01

9 815 283 367 04/03 /01 VW038903018P 00/11 /01 VW06A103544C 00/03 /01 VW06A115418 00/07 /01 VW078117021A 00/07 /01

S010549 08/10 /01 VW038903018PX 00/11 /01 VW06A103601AR 00/01 /01 VW06A115441J 00/07 /01 VW078903803EX 00/11 /01

VW021109651 00/04 /01 VW038903119B 00/11 /01 VW06A103663C 00/05 /01 VW06A115561B 00/07 /01 VW078906433B 00/01 /01

VW026103485L 00/03 /01 VW038919081M 00/07 /01 00/01 /01 VW06A121012 00/06 /01 VW101000033AA 01/05 /01

VW026105635A 00/02 /01 VW03G103707 00/01 /01 VW06A105021G 00/02 /01 VW06A121065AR 00/08 /01 VW1H0971615AB 00/07 /01

VW027109675 00/04 /01 VW048109173D 00/09 /01 VW06A105229 00/02 /01 VW06A121119 00/06 /01 VW1H0971847A 00/07 /01

VW027121631A 00/08 /01 VW048109611B 00/04 /01 VW06A105243E 00/02 /01 VW06A121121C 00/06 /01 VW1J0121086BG 00/08 /01

VW028115721 00/07 /01 VW050103591 00/03 /01 VW06A105263E 00/02 /01 VW06A121132 00/08 /01 VW1J0907660C 00/01 /01

VW028903320C 00/11 /01 VW050105189B 00/02 /01 VW06A107065BS 00/02 /01 VW06A145933L 00/10 /01 VW8D0911483A 00/12 /01

VW02M911023Q 01/02 /01 VW050105431K 00/02 /01 VW06A107441 00/02 /01 VW06A198119 00/09 /01 VWD 176404A2 00/01 /01

VW02M911023QX 01/02 /01 VW050109309J 00/04 /01 VW06A109101M 00/04 /01 VW06A198151D 00/02 /01 VWD176404A2 00/01 /01

Key to part numbers H25/27/30/32

Refer to respective page of Spare Parts List for every part wanted * = innovation

28.10.2009 print no.1313 804 90 01 25

Page 32: H25CT Manual+Linde

Part-No. Page Part-No. Page Part-No. Page Part-No. Page Part-No. Page

VWN 01021020 00/07 /01 VWN 90339605 00/02 /01

VWN 01029316 00/09 /01 VWN 90365302 00/08 /01

VWN 01100627 00/09 /01 VWN 90365901 00/05 /01

VWN 01100846 00/03 /01 VWN 90467301 00/07 /01

VWN 01111816 00/12 /01 VWN 90634001 00/04 /01

VWN 01190710 00/01 /01 VWN 90686901 00/08 /01

VWN 01191410 00/03 /01 VWN 90704007 00/07 /01

VWN 0120387 00/12 /01 00/05 /01

VWN 0122333 00/11 /01 00/01 /01

VWN 0127082 00/04 /01 VWN 90735604 00/01 /01

VWN 0138115 00/07 /01 VWN 90813202 00/01 /01

VWN 0144083 00/09 /01 VWN 90945002 00/06 /01

VWN 01508213 00/03 /01 00/09 /01

00/08 /01 00/05 /01

VWN 0160243 00/07 /01 00/01 /01

VWN 0282222 00/05 /01 00/01 /01

VWN 0432072 00/01 /01 00/01 /01

VWN 0444115 00/03 /01 VWN 91065201 00/01 /02

00/03 /01 VWWHT000422A 00/07 /01

VWN 0444625 00/03 /01 XT10020 10/011 /01

VWN 10082912 00/09 /01 XT40001 10/011 /01

VWN 10609202 00/09 /01

VWN 10610001 00/10 /01

VWN 1064081 00/10 /01

VWN 10673202 00/10 /01

VWN 90130001 00/01 /01

VWN 90316802 00/08 /01

H25/27/30/32 Key to part numbers

Refer to respective page of Spare Parts List for every part wanted * = innovation

26 print no.1313 804 90 01 28.10.2009

Page 33: H25CT Manual+Linde

Page Pos. Part-No. Page Pos. Part-No. Page Pos. Part-No. Page Pos. Part-No. Page Pos. Part-No.

02/03 /01 6 22013230102

02/03 /02 22 22013230502

Innovations H25/27/30/32

28.10.2009 print no.1313 804 90 01 1

Page 34: H25CT Manual+Linde
Page 35: H25CT Manual+Linde

Register 00 : ENGINE00/01 00 - 02 CYLINDER BLOCK, OIL SUMP00/02 00 - 01 CRANKSHAFT, PISTONS AND CONNECTING RODS00/03 00 - 01 CYLINDER HEAD00/04 00 - 01 CAMSHAFT, VALVE00/05 00 - 01 OIL PUMP ,OIL DIPSTICK00/06 00 - 01 WATER PUMP00/07 00 - 01 OIL FILTER BRACKET , OIL FILTER00/08 00 - 01 FLANGE00/09 00 - 01 TOOTHED BELT , TOOTHED BELT COVER00/10 00 - 01 ALTERNATOR MOUNTING PARTS00/11 00 - 01 ALTERNATOR00/12 00 - 01 STARTER

H25/27/30/32

28.10.2009 print no.1313 804 90 01

Page 36: H25CT Manual+Linde
Page 37: H25CT Manual+Linde
Page 38: H25CT Manual+Linde

CYLINDER BLOCK, OIL SUMP

13138030062.tif

00/01 /00 print no.1313 804 90 01 28.10.2009

Page 39: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06G103011B Crankcase 1

2 VWN 90130001 hexagon head screw 10

3 VWN 01190710 Locking Cover 3

6 VW037103139 Parallel Dowel Pin 1

6 VW037103139A Parallel Dowel Pin 1

7 VW06B103154 Oil Spray JetM BEF 001 271>>* 4

8 VWN 0432072 Dowel Pin 4

10 VW038103151H seal flange 1

11 VW038103085E oil seal 1

12 VWN 90945002 Hexagon Socket Head Bolt With 6

13 VWD 176404A2 Silicone Sealant X

14 VW06A103171A seal flange 1

15 VWN 90945002 Hexagon Socket Head Bolt With 6

16 VW06B103623P baffle 1

17 VWN 90704007 Hexagon Socket Head Bolt With 1

18 VW06A103601AR Oil Sump With Opening For 1

19 VWN 90813202 Oil drainage screw 1

20 VWN 90735604 Innensechskantschraube 20

21 VWD176404A2 silicon sealant X

22 VW06D103634E Rohr 1

23 VW06A103663C Guide Funnel 1

24 VW078906433B Impulse Sender12/06- 1

25 VWN 90945002 Hexagon Socket Head Bolt With 1

26 VW1J0907660C Oil Level Sensor 1

27 VW03G103707 Deckel für Ölwanne 1

28 VW038103196 Dichtring 1

CYLINDER BLOCK, OIL SUMP

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/01 /01

Page 40: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

29 VWN 91065201 Socket head collared bolt with 3

CYLINDER BLOCK, OIL SUMP

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

00/01 /02 print no.1313 804 90 01 28.10.2009

Page 41: H25CT Manual+Linde
Page 42: H25CT Manual+Linde

CRANKSHAFT, PISTONS AND CONNECTING RODS

13138030063.tif

00/02 /00 print no.1313 804 90 01 28.10.2009

Page 43: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A105021G Crankshaft 1

2 VW050105189B Impulse Rotor 1

3 VW053105229A Countersunk Bolt 3 M6 X 16

4 VW06A105263E Toothed Belt Pulley 1

5 VW06A105229 12-Point Head Bolt 1 M16 X 54

6 VW06A105243E Vibration Damper 1

8 VWN 90339605 Zylinderschraube 4 M8X16 mm

21 VW06A198401E ***** 1

22 VW077105425E Bolt - Connecting Rod 8 M8 X 1 X 50

25 VW050105431K ***** 4

26 VW026105635A ***** 2

27 VW06B105561 Crankshaft Bearing Shell 5 2,504 - 2,508

28 VW06D105701A ***** 4 inferior

VW06D105701K ***** 4 Superior

29 VW06A107065BS ***** 4

30 VW06A107441 Snap Ring 8

31 VW06A198151D ***** 4

CRANKSHAFT, PISTONS AND CONNECTING RODS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/02 /01

Page 44: H25CT Manual+Linde
Page 45: H25CT Manual+Linde
Page 46: H25CT Manual+Linde

CYLINDER HEAD

13138030064.tif

00/03 /00 print no.1313 804 90 01 28.10.2009

Page 47: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A103351P Cylinder Head 1

2 VWN 0444115 Stud 2 M8 X 30

3 VW038103085C seal ring 1 47 X 10 X 32

6 VWN 01100846 Hexagonal Nut 10 M8

7 VWN 0444115 Stud 8 M8 X 30

10 VW035103379 Plug 1 8, 9

11 VW06G103383A Cylinder Head Gasket (Metal) 1

12 VW06A103384C bolt 8 M10 X 1 5 X 115

13 VWN 01191410 Locking Cover 1 24

16 VW056103397 Stud 1 M8 X 56

17 VWN 0444625 Stud 10 M6 X 25

18 VW037103419B Valve Guide 1 36, 5 X 7mm

19 VW06A103475C Cylinder Head Cover 10

20 VW06A103544C ***** 1

21 VW050103591 Strip 8

22 VW056103591 Strip 8

23 VWN 01508213 Hexagon Nut, Shouldered 1 M6

24 VW051103483A Gasket 1

30 VW026103485L SEALING CAP 1

31 VW06A103483D gasket 1

CYLINDER HEAD

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/03 /01

Page 48: H25CT Manual+Linde
Page 49: H25CT Manual+Linde
Page 50: H25CT Manual+Linde

CAMSHAFT, VALVE

13138030066.tif

00/04 /00 print no.1313 804 90 01 28.10.2009

Page 51: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A109101M Camshaft 1

3 VWN 0127082 Woodruff Key 1 4 X 5

4 VW06A109105C Toothed Belt Pulley 1

6 VWN 90634001 Hexagon Head Bolt (Combi) 1 M12 X 1, 5 X 30

7 VW050109309J cam follower 8

9 VW06A109601E Intake Valve 4

10 VW048109611B Exhaust Valve 4 91, 15

11 VW078109623C Spring - Valve 8

14 VW078109641C Spring Disc 8 Upper

15 VW021109651 Cotter, Split 16

16 VW027109675 valve seal 8 7MM

CAMSHAFT, VALVE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/04 /01

Page 52: H25CT Manual+Linde
Page 53: H25CT Manual+Linde
Page 54: H25CT Manual+Linde

OIL PUMP ,OIL DIPSTICK

13138030067.tif

00/05 /00 print no.1313 804 90 01 28.10.2009

Page 55: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A115105B Oil Pump 1

2 VWN 0282222 sealing washer 1

3 VW06A115405BP Oil filter bracket 1

4 VWN 90945002 Hexagon Socket Head Bolt With 2

6 VWN 90704007 Hexagon Socket Head Bolt With 3

7 VW06A115125 Chain 1

8 VWN 90365901 Torx Socket Fillister Hd. Bolt 1

9 VW06A115125 Chain 1

10 VW06A115130 Chain Tensioner 1

11 VW06D103634E Rohr 1

12 VW06A103663C Guide Funnel 1

13 VW06B115611R Oil Dipstick 1

OIL PUMP ,OIL DIPSTICK

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/05 /01

Page 56: H25CT Manual+Linde
Page 57: H25CT Manual+Linde
Page 58: H25CT Manual+Linde

WATER PUMP

13138030068.tif

00/06 /00 print no.1313 804 90 01 28.10.2009

Page 59: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A121012 Water Pump With Sealing Washer 1

2 VW06A121119 seal 1

3 VWN 90945002 Hexagon Socket Head Bolt With 3

3 VW050121113C thermostat

5 VW038121119B washer 1

6 VW06A121121C Connecting Socket 1

WATER PUMP

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/06 /01

Page 60: H25CT Manual+Linde
Page 61: H25CT Manual+Linde
Page 62: H25CT Manual+Linde

OIL FILTER BRACKET , OIL FILTER

13138030070.tif

00/07 /00 print no.1313 804 90 01 28.10.2009

Page 63: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A115405BP Oil filter bracket 1

2 VW06A103175 Valve 1

6 VWWHT000422A Sealing Plug 1

7 VW028115721 Threaded Union 1

8 VWN 0138115 Sealing Washer 2

9 VWN 0160243 Sealing Plug 2

10 VW06A115441J gasket 1

12 VWN 90704007 Hexagon Socket Head Bolt With 4

13 VW038117070A seal, oil cooler 1

14 VW078117021A Oil Cooler 1

15 VW068115723 Hexagonal Nut 1

16 VW06A115561B oil filter 1

17 VW037121142A Retaining Spring 1

18 VWN 90467301 Round Seal 1

19 VW06A115418 Locking Cover 1

20 VW038919081M Oeldruckschalter 1

21 -

22 VWN 01021020 Hexagonal Head Bolt 3

23 VW1H0971615AB Cable Holder 1

24 VW1H0971847A Clip 1

OIL FILTER BRACKET , OIL FILTER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/07 /01

Page 64: H25CT Manual+Linde
Page 65: H25CT Manual+Linde
Page 66: H25CT Manual+Linde

FLANGE

13138030071.tif

00/08 /00 print no.1313 804 90 01 28.10.2009

Page 67: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A121132 Flange With Sealing Ring 1

2 VW037121688 seal 1

3 VW027121631A Double Hex. Hd. Bolt 2

4 VWN 90316802 seal 1

5 VW059919501A sensor 1

6 VW032121142 retaining spring 1

7 VW06A121065AR Water Pipe 1

8 VWN 90365302 Round Seal 1

9 VWN 01508213 Hexagon Nut, Shouldered 1

10 VW1J0121086BG ***** 1

11 VWN 90686901 Spring-Type Clip 1

FLANGE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/08 /01

Page 68: H25CT Manual+Linde
Page 69: H25CT Manual+Linde
Page 70: H25CT Manual+Linde

TOOTHED BELT , TOOTHED BELT COVER

13138030072.tif

00/09 /00 print no.1313 804 90 01 28.10.2009

Page 71: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A109108T Toothed Belt Cover 1

2 VW06A109150 Spring Clamp 2

3 VW06A109147F Toothed Belt Cover 1

4 VW06A109105C Toothed Belt Pulley 1

5 VW06A109119C cam belt 1

6 VW048109173D Covering 1

7 VWN 01100627 ***** 2

9 VW06A109129A covering 1

10 VWN 90945002 Hexagon Socket Head Bolt With 1

11 VWN 01029316 Hexagonal Head Bolt 1

12 VW06A109175B cover toothbelt 1

13 VWN 10082912 Sechskantschraube (Kombi) 5

14 VWN 0144083 Stud 1

15 VW06A109479F Spannrolle 1

16 VWN 10609202 ***** 1

17 VW06A198119 Repair Kit For Toothed Belt 1 includes items 5, 15, 16

TOOTHED BELT , TOOTHED BELT COVER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/09 /01

Page 72: H25CT Manual+Linde
Page 73: H25CT Manual+Linde
Page 74: H25CT Manual+Linde

ALTERNATOR MOUNTING PARTS

13138030074.tif

00/10 /00 print no.1313 804 90 01 28.10.2009

Page 75: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW06A903141P ***** 1

2 VW06A903315E Tensioner 1

3 VW06A145933L ***** 1

4 VWN 10610001 Hexagon Head Bolt C/W Shoulder 1

5 VWN 1064081 ***** 1

6 VWN 10673202 ***** 1

ALTERNATOR MOUNTING PARTS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/10 /01

Page 76: H25CT Manual+Linde
Page 77: H25CT Manual+Linde
Page 78: H25CT Manual+Linde

ALTERNATOR

13138030075.tif

00/11 /00 print no.1313 804 90 01 28.10.2009

Page 79: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW038903018P Alternator 1

1 VW038903018PX Alternator 1

2 VW038903119B ribbed belt pulley 1

3 VWN 0122333 Spring Washer 1

4 VW037903181 Shouldered Nut 1

5 VW037145291 Protective Cap 1

6 VW078903803EX Voltage Regulator 1

VW028903320C repair kit 1

ALTERNATOR

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/11 /01

Page 80: H25CT Manual+Linde
Page 81: H25CT Manual+Linde
Page 82: H25CT Manual+Linde

STARTER

13138030076.tif

00/12 /00 print no.1313 804 90 01 28.10.2009

Page 83: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 VW068911024F starter motor 1

2 VW068911024GX -sx starter 1

3 VWN 01111816 Hexagonal Nut 1

4 VWN 0120387 Lock Ring 1

5 VW068911287H Solenoid Switch 1

7 VW035911299B Torx Socket Head Bolt 3

8 VW8D0911483A Anti-Twist Retainer 1

STARTER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 00/12 /01

Page 84: H25CT Manual+Linde
Page 85: H25CT Manual+Linde

01POWER UNIT: ENGINE/MOTOR

02DRIVE: TRANSMISSION

03CHASSIS UNIT

04STEERING AND WHEELS

05CONTROLS

06ELECTRIC EQUIPMENT

07HYDRAULIC UNIT

08LIFT MAST

09SPECIAL EQUIPMENT

10MISCELLANEOUS

28.10.2009

Page 86: H25CT Manual+Linde
Page 87: H25CT Manual+Linde

Register 01 : POWER UNIT: ENGINE/MOTOR01/01 00 - 01 AIR SUPPLY FOR ENGINE AND AIR FILTER01/02 00 - 02 ENGINE SUSPENSION AND AXLE DRIVE LPG ENGINE01/03 00 - 03 COOLING SYSTEM01/04 00 - 03 LPG SYSTEM - GOVERNED CATALYZER01/05 00 - 01 IGNITION SYSTEM REGULATED CATALYZER CONVERTER01/06 00 - 01 LPG TANK01/07 00 - 02 LPG TANK WITH SWIVELLING CONSOLE01/08 00 - 01 EXHAUST SYSTEM

H25/27/30/32

28.10.2009 print no.1313 804 90 01

01

Page 88: H25CT Manual+Linde
Page 89: H25CT Manual+Linde
Page 90: H25CT Manual+Linde

AIR SUPPLY FOR ENGINE AND AIR FILTER

13138030101.tif

01/01 /00 print no.1313 804 90 01 28.10.2009

01

Page 91: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 983 20 78 air filter 1 version raised preliminary filter

2 1313 170 10 00 pipe assy. 1 version raised preliminary filter

3 9 008 311 186 1 hexagon head screw ISO 4017 M8x30-8.8-A2C 2 version raised preliminary filter

4 9 294 003 018 1 washer ISO 7092 8,4-ST50-A2C 2 version raised preliminary filter

5 1313 173 11 00 pipe 1 version raised preliminary filter

6 000 955 07 12 clip DIN 3021 1 version raised preliminary filter

7 000 955 20 62 clip hose DIN 3017 A50-70x13-W2 4 version raised preliminary filter

8 000 980 10 57 air filter assy. 1 version raised preliminary filter = pos. 10 -

9 000 980 10 43 air filter assy. 1 version Standard = pos. 10 - 15

10 000 983 20 94 air filter 1

11 7 9154 91 021 switch vacuum 1

12 000 951 01 42 pipe union 1/8 1

13 000 983 99 37 support 1

14 000 983 17 09 ***** 1

15 000 983 81 11 ***** 1

16 000 983 17 01 filter element 1

17 9 292 009 017 1 washer ISO 7089 A8,4-St50-A2R 4

18 9 008 311 183 1 hexagon head screw ISO 4017 M8x25-8.8-A2C 4

19 1313 173 14 02 support 1

20 1313 432 42 04 covering 1 version Standard

22 1313 173 18 00 flexible formed hose 1

23 1313 173 18 01 flexible formed hose 1

24 000 955 20 34 clip hose DIN 3017 A40-60x13-W2 1

25 000 955 20 31 clip hose DIN 3017 A25-40x13-W2 1

AIR SUPPLY FOR ENGINE AND AIR FILTER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/01 /01

01

Page 92: H25CT Manual+Linde
Page 93: H25CT Manual+Linde
Page 94: H25CT Manual+Linde

ENGINE SUSPENSION AND AXLE DRIVE LPG ENGINE

13138030102.tif

01/02 /00 print no.1313 804 90 01 28.10.2009

01

Page 95: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 220 01 00 ASM motor VW BEF standard 1

1 1313 220 01 01 ASM motor VW BEF with TOG 1

2 391 030 15 04 flywheel assy. 1

3 9 045 374 168 screw socket head ISO 21269 M10x1x20-12.9-MK-5x3 6

4 392 232 22 00 textile disc 1

5 9 294 003 020 washer ISO 7092 10-200HV-A2C 3 C

6 9 008 311 243 hexagon head screw ISO 4017 M10x35-8.8-A2C 3

7 1313 231 14 03 intermediate flange 1

8 000 906 35 06 sleeve 2

9 9 291 003 022 washer ISO 7090 B12-HV200-A2C 4

10 9 045 316 372 socket head screw ISO 4762 M12x100-8.8-A2C 4

11 9 045 316 318 socket-head screw ISO 4762 M12x110-8.8-A2C 1

12 000 905 04 02 square nut M12 1

13 000 978 50 00 sensor 1

14 000 916 06 09 bush 1

15 9 210 281 090 hexagon nut ISO 4032 DIN 934-M6-8A2C 2

16 9 133 341 143 threaded pin DIN 913 DIN 913-M6x50-45H 1

17 VW02M911023Q Starter 1 Linde number = 000.971.01.26

17 VW02M911023QX Starter 1 Linde number = 000.971.01.76

18 9 291 003 022 washer ISO 7090 B12-HV200-A2C 2

19 9 008 311 300 hexagon head screw ISO 4017 M12x35-8.8-A2C 2

20 1313 210 01 06 motor support assy. 1

21 9 309 412 028 washer DIN 7349 17-ST50-A2C 4

22 9 045 316 411 socket-head screw ISO 4762 M16x45-8.8-A2C 4

23 000 916 17 07 bush 17x21x19,5 2

24 1313 210 01 10 motor support assy. left side 1

26 9 292 009 017 washer ISO 7089 A8,4-St50-A2R 4

ENGINE SUSPENSION AND AXLE DRIVE LPG ENGINE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/02 /01

01

Page 96: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

27 1313 210 01 11 motor support assy. 1

28 9 008 311 244 hexagon head screw ISO 4017 M10x40-8.8-A2C 3

29 9 291 003 020 washer ISO 7090 B10,5x20x2-HV200-A2C 3

30 000 965 42 06 spring element 2

33 9 292 430 020 washer ISO 7089 10-300HV-A2C 8

34 9 008 311 411 hexagon head screw ISO 4017 M16x45-8.8-A2C 4

35 ---------- 5 final drive assy. 1 see illustration 02/01 - 02/03

36 1313 262 60 00 drive shaft universal 1

37 000 965 42 15 spring element 2

38 000 914 40 24 washer 40,5x70x14 1

39 000 914 16 35 washer 16,5x75x8 1

40 9 007 311 420 hexagon head bolt ISO 4014 M16x90-8.8-A2C 1

41 ---------- 5 ***** 1 see illustration 02/02 - 02/08

43 9 291 003 028 washer ISO 7090 16-200HV-A2C 4

44 393 430 95 07 Instll TOT ENCL ALT 392, 393 LPG 1 for version UL/LPS

45 1313 210 25 01 angle assy. 2

48 9 008 311 236 hexagon head screw ISO 4017 M10x20-8.8-A2C 8

49 9 007 311 422 hexagon head bolt ISO 4014 M16x100-8.8-A2C 2

50 9 291 003 020 washer ISO 7090 B10,5x20x2-HV200-A2C 1

51 9 045 316 247 socket-head screw ISO 4762 M10x55-8.8-A2C 1

52 9 045 316 195 socket-head screw ISO 4762 M8x50-8.8-A2C 1

53 9 045 316 190 socket-head screw ISO 4762 M8x40-8.8-A2C 3

54 000 914 75 68 1 washer 16x76x5 2

55 1313 363 12 02 support 1

56 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

57 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

ENGINE SUSPENSION AND AXLE DRIVE LPG ENGINE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

01/02 /02 print no.1313 804 90 01 28.10.2009

01

Page 97: H25CT Manual+Linde
Page 98: H25CT Manual+Linde

COOLING SYSTEM

13138030103.tif

01/03 /00 print no.1313 804 90 01 28.10.2009

01

Page 99: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 110 05 00 air duct assy. 1

1313 110 05 01 air duct assy. screen 1 with optional radiator screen

2 1313 107 05 00 radiator 1

1313 107 05 01 radiator 1 with optional radiator screen

3 1313 116 08 01 cover sheet 1 H25H27

3 1313 116 08 00 cover sheet 1 H30H32

4 000 981 04 48 gear pump 1

5 9 721 002 015 pipe union ISO 8434-1 SDS-L15xM18x1,5-type E-CFS-V 2

6 000 951 19 26 piece connection M14x1,5x47 1

7 392 115 08 21 support 4

8 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 15/13 quantity = 13 with optional radiator screen

9 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 12/10 quantity = 10 with optional radiator screen

10 1313 363 12 01 Support 1

11 9 008 311 293 hexagon head screw ISO 4017 M12x20-8.8-A2C 2

12 9 291 003 022 washer ISO 7090 B12-HV200-A2C 2

13 392 105 01 01 fan 1

14 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 1

15 9 294 003 020 washer ISO 7092 10-200HV-A2C 1

16 000 965 41 03 bumper rubber 2

17 9 210 281 110 nut ISO 4032 934-M8-8A2C 4

20 1313 116 80 00 seal 1

21 000 964 36 29 profile rubber 457mm 1

22 000 964 36 32 profile rubber 65mm 2

23 000 964 36 27 profile rubber 215mm 2 H25H27

COOLING SYSTEM

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/03 /01

01

Page 100: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

23 000 964 36 33 profile rubber 275mm 2 H30H32

24 1313 108 40 03 hose flexible formed 1

25 000 955 20 60 clip hose DIN 3017 A32-50x13-W2 2

26 000 955 20 09 clip hose DIN 3017 A16-27x9-W2 4

27 000 955 20 54 clip DIN 3017 A12-20x9-W2 2

28 1313 108 40 04 hose flexible formed 1

29 1313 108 40 05 hose flexible formed 1

30 000 955 20 36 clip hose DIN 3017 A20-32x13-W2 1

31 1313 108 40 06 hose flexible formed 1

32 1313 115 00 00 plate 1

33 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 2

34 9 045 316 128 socket head screw ISO 4762 M6x16-8.8-A2C 2

35 000 982 08 45 reservoir 1

36 000 918 46 26 lid 1

37 9 380 620 419 spring dowel sleeve ISO 8752 10x45-ST 1

38 9 291 429 022 washer ISO 7090 B13-HV300 1

39 9 045 316 298 socket-head screw ISO 4762 M12x30-8.8-A2C 1

40 000 955 30 76 tie cable 2

41 000 950 23 15 pipe clip assy. 2

42 000 950 22 33 clip fastening assy. 1

43 000 955 20 31 clip hose DIN 3017 A25-40x13-W2 2

44 000 950 23 27 pipe clip assy. 1 for pos. 24 / 28 / 31

45 000 950 22 51 clip fastening assy. A3+A4/14+30 1

46 9 308 003 018 washer ISO 7093-1 8-200HV-A2C 4

47 1313 808 58 01 ***** 1 with optional radiator screen

48 000 931 08 29 handle 2 with optional radiator screen

COOLING SYSTEM

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

01/03 /02 print no.1313 804 90 01 28.10.2009

01

Page 101: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

49 000 964 19 56 moulding - seal A27,5x565 a.req. with optional radiator screen

COOLING SYSTEM

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/03 /03

01

Page 102: H25CT Manual+Linde
Page 103: H25CT Manual+Linde
Page 104: H25CT Manual+Linde

LPG SYSTEM - GOVERNED CATALYZER

13138030105.tif

01/04 /00 print no.1313 804 90 01 28.10.2009

01

Page 105: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 572 20 00 pressure regulator 1

2 1313 572 27 00 angle 1

3 000 901 90 70 screw 1/4-20x3/4" 2

4 1313 572 18 01 shut-off valve 1

5 000 951 21 44 pipe union 5/8-18-UNF 1

6 000 956 01 01 pipe union 5/8/90 1

7 000 951 33 20 T-piece NPT-1/8 2

8 000 944 22 49 control valve 1

9 1313 572 27 01 angle 1

10 000 901 90 66 screw 8-32x3/8" 2

11 000 964 17 75 hose 1

12 000 956 01 02 pipe union 5/8-St 1

13 000 951 55 07 threaded elbow pipe 5/8 1

14 000 951 19 35 piece connection 1

15 000 956 01 08 angle vacuum nipple. elbow adaptor 2

16 000 952 44 12 reducer CAP3/4 1

17 000 956 01 09 pipe union 1/8NPT-3/8"/90°-Nyl 3

18 000 964 17 76 hose 1

19 000 955 07 08 clip DIN 3021 2

20 000 964 17 77 hose 1

21 000 955 50 01 clip 4

22 000 964 17 78 hose 1

23 000 964 15 68 hose 1

24 000 907 52 08 pin retainer 4

25 000 951 01 48 pipe union 1

26 9 045 316 298 socket-head screw ISO 4762 M12x30-8.8-A2C 1

27 9 291 429 022 washer ISO 7090 B13-HV300 1

LPG SYSTEM - GOVERNED CATALYZER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/04 /01

01

Page 106: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

28 9 310 003 022 washer/shim/disc DIN 7989 2

29 9 380 620 419 spring dowel sleeve ISO 8752 10x45-ST 1

30 000 980 31 00 throttle 1

31 000 907 50 30 snap ring 1

32 000 951 04 13 adapter 1

33 000 961 91 89 gasket 1

34 000 982 21 01 throttle 1

35 9 045 316 143 1 screw,socket hd ISO 4762 M6x50-8.8-A2C 4

36 9 292 003 014 1 washer ISO 7089 A6,4-ST50-A2C 4

37 391 570 17 06 mixing unit assy. 1

38 000 907 52 08 pin retainer 1

39 000 907 52 09 pin retainer 1

40 000 952 75 28 pipe union 1

41 000 956 01 01 pipe union 5/8/90 1

42 000 963 90 70 O-RING 1

43 1313 572 14 00 mixer 1

44 9 026 316 099 hexagon head bolt M5x16-8.8-A2C 4

45 391 572 13 00 intake manifold 1

46 391 572 27 00 angle 1

47 7 9174 15 649 sensor 1

48 9 031 316 127 hexagon head bolt EN 1665 M6x14-8.8-A2C 1

49 9 031 316 129 HEXAGON SCREW, M6x16-8.8-A2C EN 1665 1

50 9 045 316 186 1 socket-head screw ISO 4762 M8x30-8.8-A2C 6

51 9 292 003 018 1 washer ISO 7089 A8,4-ST50-A2C 6

52 9 210 281 110 1 nut ISO 4032 934-M8-8A2C 2

53 9 309 412 018 1 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

54 1313 574 10 00 pipe 1

LPG SYSTEM - GOVERNED CATALYZER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

01/04 /02 print no.1313 804 90 01 28.10.2009

01

Page 107: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

54a 1313 574 10 02 pipe 1 version ultra sound sensor

55 9 045 316 138 socket-head screw ISO 4762 M6x35-8.8-A2C 1

56 7 9154 91 014 pressure switch 1 Loctite nr. 5331only in connection with residual flowindicat

57 000 944 13 57 high-pressure relief valve 1 Loctite nr. 5331

58 000 952 07 16 elbow 1

59 1313 570 17 00 device mixing,carburetor assy. 1

60 1313 570 30 00 Evaporator assy. 1

61 000 955 20 89 clip hose DIN 3017 A8-12x9-W2-1 4

62 000 961 91 57 seal 1

63 000 950 23 30 pipe clip assy. 1

64 000 950 23 26 pipe clip assy. 1 for pos. 18 / 20

65 000 950 22 45 clip fastening assy. 1 for pos. 18 / 20

66 000 950 22 56 clip assy. 1 for pos. 20 / 22

67 000 955 26 04 clip fastening assy. 1 for pos. 22 / harness main

LPG SYSTEM - GOVERNED CATALYZER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/04 /03

01

Page 108: H25CT Manual+Linde
Page 109: H25CT Manual+Linde
Page 110: H25CT Manual+Linde

IGNITION SYSTEM REGULATED CATALYZER CONVERTER

13138030106.tif

01/05 /00 print no.1313 804 90 01 28.10.2009

01

Page 111: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 391 363 12 20 support 1

2 000 901 90 59 screw M7x21,5 2

3 000 901 90 75 screw M7x55 1

4 000 972 17 06 ignition coil 1

5 9 045 316 143 screw,socket hd ISO 4762 M6x50-8.8-A2C 3

6 000 977 28 20 ignition cable 1-4 1

7 9 210 281 090 1 hexagon nut ISO 4032 DIN 934-M6-8A2C 1

8 9 292 003 014 1 washer ISO 7089 A6,4-ST50-A2C 1

9 VW101000033AA spark plug BEF 4

IGNITION SYSTEM REGULATED CATALYZER CONVERTER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/05 /01

01

Page 112: H25CT Manual+Linde
Page 113: H25CT Manual+Linde
Page 114: H25CT Manual+Linde

LPG TANK

13138030108.tif

01/06 /00 print no.1313 804 90 01 28.10.2009

01

Page 115: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 937 01 60 tightening strap 2

2 9 062 311 178 countersunk screw ISO 10642 7991-M8x16-8.8A2C 4

3 000 912 02 29 bolt 1

4 000 912 02 30 bolt 1

5 000 951 64 04 screw coupling 1 1/4"ACME-1/4"NPT 1

6 000 952 75 18 ELBOW, UNION 90º SWVL - SAE 45º FLARE -6 1

7 000 955 22 66 clip DIN 3016-1 D1-22X20-W1-1 1

8 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 1

9 000 957 06 00 fuel line 1 H25H27

9 000 957 06 04 fuel line 1 H30H32

10 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

LPG TANK

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/06 /01

01

Page 116: H25CT Manual+Linde
Page 117: H25CT Manual+Linde
Page 118: H25CT Manual+Linde

LPG TANK WITH SWIVELLING CONSOLE

13138030109.tif

01/07 /00 print no.1313 804 90 01 28.10.2009

01

Page 119: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 570 11 19 console assy. 1

2 000 916 50 58 bush flanged 16X22X28X18X20 2

3 000 912 02 30 bolt 1

4 000 912 02 29 bolt 1

5 9 309 003 020 ***** 4

6 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C 4

7 1313 570 11 18 console assy. 1

8 9 008 311 135 hexagon head screw ISO 4017 M6x25-8.8-A2C 1

9 9 208 056 090 hexagon nut ISO 4035 DIN 439-BM6-04A2C 1

10 000 922 10 00 spring tension 1X8.4X53 1

11 000 962 01 03 pipe plug WN 17253 WN 17253-10,9x9,5 2

12 9 323 620 022 spring washer DIN 137 DIN 137-B12-A2C 1

13 9 008 311 300 hexagon head screw ISO 4017 M12x35-8.8-A2C 1

14 9 214 317 140 hexagon nut ISO 7042 M12-8-A2C 1

15 7 9174 15 613 sensor 1

16 392 571 20 47 support 1

17 9 045 316 131 socket head screw M6X18-8.8-A2C 3

18 1313 363 42 03 angle 1

19 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 2

20 9 045 316 131 socket head screw M6X18-8.8-A2C 2

25 000 965 25 19 rubber buffer DM8x15 2

26 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

27 000 962 01 03 pipe plug WN 17253 WN 17253-10,9x9,5 1

28 000 964 38 09 cap 2 evtl. andere Gruppe

29 000 962 01 03 pipe plug WN 17253 WN 17253-10,9x9,5 2 evtl. andere Gruppe

30 1313 570 12 04 angle assy. 1

31 1313 570 12 05 angle assy. 1

LPG TANK WITH SWIVELLING CONSOLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/07 /01

01

Page 120: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

32 000 922 51 32 ***** 1

33 000 977 95 23 cable 1

34 9 323 620 022 spring washer DIN 137 DIN 137-B12-A2C 1

35 000 957 06 00 fuel line 1 H25 / H27

35 000 957 06 04 fuel line 1 H30 / H32

36 000 951 64 04 screw coupling 1 1/4"ACME-1/4"NPT 1

37 000 955 22 66 clip DIN 3016-1 D1-22X20-W1-1 1

38 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 1

39 000 951 64 04 screw coupling 1 1/4"ACME-1/4"NPT 1

40 000 952 75 29 elbow 45° 1

41 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

42 9 210 281 090 hexagon nut ISO 4032 DIN 934-M6-8A2C 2

LPG TANK WITH SWIVELLING CONSOLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

01/07 /02 print no.1313 804 90 01 28.10.2009

01

Page 121: H25CT Manual+Linde
Page 122: H25CT Manual+Linde

EXHAUST SYSTEM

13138030111.tif

01/08 /00 print no.1313 804 90 01 28.10.2009

01

Page 123: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 172 15 00 protective cover 1

2 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 4

3 000 901 30 43 button head screw M8x20-10.9-A2A 2

4 000 950 22 20 clip fastening assy. 2

5 000 955 30 76 tie cable 2

6 1313 173 19 02 manifold 1

7 000 955 22 91 clip pipe 54-M8-W1 1

8 000 955 03 11 clip 1

9 000 955 21 89 hose clip 226x30 1

10 000 955 09 37 clip 1

11 9 045 316 300 screw cap hd ISO 4762 M12x35-8.8-A2C 1

12 1313 581 01 02 silencer 1

13 7 9190 95 258 sensor lambda 2

14 1313 172 01 00 exhaust pipe 1

EXHAUST SYSTEM

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 01/08 /01

01

Page 124: H25CT Manual+Linde
Page 125: H25CT Manual+Linde

Register 02 : DRIVE: TRANSMISSION02/01 00 - 03 DRIVE AXLE02/02 00 - 02 Power unit and housing HPV02/03 00 - 02 Power unit and housing HMF02/04 00 - 03 Servopiston and gear pump02/05 00 - 01 Port plate housing and valves02/06 00 - 03 Remote control E2 (4-16 bar) non bleed02/07 00 - 01 Service units02/08 00 - 01 brake valve

H25/27/30/32

28.10.2009 print no.1313 804 90 01

02

Page 126: H25CT Manual+Linde
Page 127: H25CT Manual+Linde
Page 128: H25CT Manual+Linde

DRIVE AXLE

13138031002.tif

02/01 /00 print no.1313 804 90 01 28.10.2009

02

Page 129: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1313 260 03 01 final drive assy. complete assembly

1 1313 000 95 00 ***** 2 complete assembly , includes position 2 -19

2 000 962 45 16 ***** 2

3 000 905 02 43 ***** 2

4 000 963 90 86 ***** 2

5 1313 264 35 00 ***** 2

6 000 928 20 00 ***** 2

7 000 924 77 14 ***** 2

8 000 901 50 16 ***** 22

9 ---------- 4

10 000 963 90 85 ***** 2

11 000 928 06 47 ***** 2

12 000 924 77 13 ***** 2

13 000 914 65 23 ***** 2

14 1313 264 08 00 ***** 2

15 1313 264 09 00 ***** 8

16 000 924 50 39 ***** 8

17 000 907 50 47 ***** 8

18 1313 504 21 00 ***** 2

19 9 381 660 466 ***** 2

20 1313 500 30 00 ***** 1

21 1313 232 02 02 ***** 2

22 1313 232 02 00 ***** 6

23 1313 232 02 01 ***** 6

24 000 916 90 16 ***** 2

DRIVE AXLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/01 /01

02

Page 130: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

25 1313 256 15 00 ***** 2

26 000 916 90 15 ***** 2

27 000 922 67 12 ***** 4

28 1313 260 35 00 ***** 1

29 1313 253 10 00 ***** 1

30 000 905 02 42 ***** 1

31 000 906 50 01 ***** 1

32 000 928 06 46 ***** 1

33 000 961 01 26 ***** 1

34 000 924 77 16 ***** 1

35 000 901 50 14 ***** 12

36 1313 251 12 00 ***** 1

37 9 381 660 370 parallel pin ISO 8734 8m6x24-A-St 4

38 000 914 65 22 ***** 1

39 000 916 96 50 ***** 1

40 000 915 90 48 ***** 1

41 000 914 65 20 ***** 1

42 000 924 77 15 ***** 1

43 000 914 65 19 ***** 1

44 ---------- 4

45 1313 251 15 00 ***** 1

46 000 901 50 17 ***** 4

47 000 914 65 21 ***** 1

48 000 924 77 17 ***** 1

49 ---------- 4

50 000 901 50 15 ***** 12

51 000 924 77 18 ***** 1

DRIVE AXLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

02/01 /02 print no.1313 804 90 01 28.10.2009

02

Page 131: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

52 000 914 65 24 ***** 1

53 000 907 50 46 ***** 1

54 1313 264 08 01 ***** 1

55 000 907 50 46 *****

56 1313 264 11 00 ***** 1

57 000 903 40 36 ***** 1

58 000 961 01 25 ***** 1

59 000 944 05 18 ***** 1

60 000 903 40 37 ***** 2

61 000 961 01 23 ***** 2

62 000 903 40 35 ***** 1

63 000 903 40 34 ***** 1

64 000 961 01 24 ***** 2

65 1313 441 51 00 ***** 2

66 000 907 32 00 ***** 2

DRIVE AXLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/01 /03

02

Page 132: H25CT Manual+Linde
Page 133: H25CT Manual+Linde
Page 134: H25CT Manual+Linde

Power unit and housing HPV

22018035000.tif

02/02 /00 print no.1313 804 90 01 28.10.2009

02

Page 135: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 9 456 622 552 1 retaining ring DIN 472 1

2 000 928 03 67 shaft seal ring WN 17216 1 Loctite nr. 270

3 2201 301 00 04 housing 1

4 000 952 40 29 screw plug M22x1,5 1

6 000 963 00 38 o ring 7,5x2-V80 3

8 293 323 05 01 race 1 Loctite nr. 648

9 9 509 000 731 taper roller bearing DIN 720 1

10 263 323 01 05 drive shaft 1 SAE-spline 16/32 pitch 21 teeth

11 000 908 02 61 pin 2

12 000 923 40 31 bearing sliding 2

13 253 323 20 13 cradle 1

14 000 916 02 00 bush 4

15 263 320 04 05 piston assy. solid piston 9 exchange by set only

16 253 323 14 06 pull-back plate 1

17 253 343 25 01 spacer plate 0,05 a.req.

17 253 343 25 02 spacer plate 0,075 a.req.

17 253 343 25 03 spacer plate 0,1 a.req.

18 253 343 18 11 holding plate 1

19 9 048 348 183 1 socket-head screw Y7984-M8x25-10.9PH 4 Loctite nr. 648

20 253 343 25 11 spacer plate 0,05 a.req.

20 253 343 25 12 spacer plate 0,075 a.req.

20 253 343 25 13 spacer plate 0,1 a.req.

21 263 343 18 08 holding plate 1

22 293 320 08 04 cylinder block assy. 1

23 000 914 35 06 washer 1

24 000 921 56 27 compression spring 6x42,2x76,5 1

25 000 914 32 18 washer 33x49,9x3,5-H 1

Power unit and housing HPV

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/02 /01

02

Page 136: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

26 9 289 003 580 1 shim DIN 988 DIN 988 40x50x0.1 a.req.

26 9 289 003 582 1 shim DIN 988 40x50x0,3 a.req.

26 9 289 003 586 1 shim DIN 988 40x50x1,0 a.req.

27 9 456 622 505 1 retaining ring DIN 472 50x2,0 1

28 000 914 30 02 washer 30,1x38x5,9 1

29 9 509 000 675 tapered roller bearing DIN 720 1

30 000 914 61 51 shim 45x55x1,00 1 * * = optionally

30 000 914 61 52 shim 45x55x1,05 1 *

30 000 914 61 53 shim 45x55x1,10 1 *

30 000 914 61 54 shim 45x55x1,15 1 *

30 000 914 61 55 shim 45x55x1,20 1 *

30 000 914 61 56 shim 45x55x1,25 1 *

30 000 914 61 57 shim 45x55x1,50 1 *

30 000 914 61 58 shim 45x55x1,75 1 *

31 263 324 02 07 port plate 1

32 9 381 660 312 1 cylindrical pin ISO 8734 6m6x20-A-St 2

33 392 230 64 01 coupling flange assy. 1

34 262 345 35 00 valve cone 1

35 000 921 08 24 spring 1

36 262 343 38 01 spring plate 1

37 000 963 21 24 o-ring 15,3x2,4-V80 1

38 000 961 22 06 pipe union 1

39 7 7777 00 217 protective cap 16x38,1 1

Power unit and housing HPV

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

02/02 /02 print no.1313 804 90 01 28.10.2009

02

Page 137: H25CT Manual+Linde
Page 138: H25CT Manual+Linde

Power unit and housing HMF

22018035001.tif

02/03 /00 print no.1313 804 90 01 28.10.2009

02

Page 139: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 2201 264 24 01 cover 1

2 9 045 311 177 1 socket-head screw ISO 4762 M8x16-8.8-A2C 7

3 000 963 09 03 o-ring 95x2-V80 1

4 9 509 000 731 taper roller bearing DIN 720 1

5 9 385 600 326 1 cylindrical pin ISO 8735 6x50-A-St 1

6 2201 323 01 01 3 drive shaft 1 2201 323 01 02 =>| 04/2009including:1 x 2201.323.05.02 - race

6 2201 323 01 02 drive shaft 1 05/2009 |=>

7 293 343 51 06 sliding disc 1

8 233 320 04 03 piston assy. 9 exchange by set only

9 293 323 14 03 pull-back plate 1

10 293 323 31 08 ring 2,97 1 * * = optionally

10 293 323 31 09 ring 2,99 1 *

10 293 323 31 10 ring 3,01 1 *

10 293 323 31 11 ring 3,03 1 *

10 293 323 31 12 ring 3,05 1 *

11 293 320 08 04 cylinder block assy. 1

12 000 914 35 06 washer 1

13 000 921 56 27 compression spring 6x42,2x76,5 1

14 000 914 32 18 washer 33x49,9x3,5-H 1

15 9 289 003 580 1 shim DIN 988 DIN 988 40x50x0.1 a.req.

15 9 289 003 582 1 shim DIN 988 40x50x0,3 a.req.

15 9 289 003 586 1 shim DIN 988 40x50x1,0 a.req.

16 9 456 622 505 1 retaining ring DIN 472 50x2,0 1

17 000 914 30 02 washer 30,1x38x5,9 1

18 9 509 000 675 tapered roller bearing DIN 720 1

19 000 914 61 51 shim 45x55x1,00 1 * * = optionally

Power unit and housing HMF

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/03 /01

02

Page 140: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

19 000 914 61 52 shim 45x55x1,05 1 *

19 000 914 61 53 shim 45x55x1,10 1 *

19 000 914 61 54 shim 45x55x1,15 1 *

19 000 914 61 55 shim 45x55x1,20 1 *

19 000 914 61 56 shim 45x55x1,25 1 *

19 000 914 61 57 shim 45x55x1,50 1 *

19 000 914 61 58 shim 45x55x1,75 1 *

20 293 324 02 06 port plate 1

21 000 912 11 19 bolt 2

22 2201 323 05 01 3 race 1 2201 323 05 02 =>| 04/2009Loctite nr. 648including:1 x 2201.323.01.02 drive shaft

22 2201 323 05 02 race 1 05/2009 |=>Loctite nr. 648

23 000 928 03 67 shaft seal ring WN 17216 1 Loctite nr. 270

24 9 456 622 534 1 retaining ring DIN 472 1

25 2201 232 47 03 coupling flange 1

26 000 914 11 28 washer 1

27 9 048 348 236 1 screw 1 Loctite nr. 648

Power unit and housing HMF

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

02/03 /02 print no.1313 804 90 01 28.10.2009

02

Page 141: H25CT Manual+Linde
Page 142: H25CT Manual+Linde

Servopiston and gear pump

13138030200.tif

02/04 /00 print no.1313 804 90 01 28.10.2009

02

Page 143: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

599 320 95 00 repair kit assy. 1 includes 2 x all pos. 3

3 000 914 03 20 washer a.req.

3 000 914 03 31 washer a.req.

3 000 914 03 21 washer a.req.

3 000 914 03 32 washer a.req.

3 000 914 03 22 washer a.req.

3 000 914 03 33 washer a.req.

3 000 914 03 23 washer a.req.

3 000 914 03 04 washer 3x7,5x2,44 a.req.

3 000 914 03 34 washer a.req.

3 000 914 03 42 washer 3x7,5x2,51 a.req.

3 000 914 03 24 washer a.req.

3 000 914 03 01 washer 3x7,5x2,59 a.req.

3 000 914 03 35 washer a.req.

3 000 914 03 02 washer 3x7,5x2,66 a.req.

3 000 914 03 25 washer a.req.

3 000 914 03 43 washer 3x7,5x2,74 a.req.

3 000 914 03 36 washer a.req.

3 000 914 03 44 washer 3x7,5x2,81 a.req.

3 000 914 03 26 washer a.req.

3 000 914 03 45 washer 3x7,5x2,89 a.req.

3 000 914 03 37 washer a.req.

3 000 914 03 27 washer a.req.

3 000 914 03 38 washer a.req.

3 000 914 03 28 washer a.req.

3 000 914 03 39 washer a.req.

3 000 914 03 29 washer a.req.

Servopiston and gear pump

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/04 /01

02

Page 144: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

3 000 914 03 40 washer a.req.

3 000 914 03 30 washer a.req.

5 000 963 20 31 o ring 5x1,5-V80 2

6 000 962 27 53 ring 2

7 253 301 40 03 pipe 2

8 000 962 38 29 seal ring 2

9 263 345 04 01 valve piston 2

10 263 343 51 01 washer 4,55 2 * * = optionally

10 263 343 51 02 washer 4,65 2 *

10 263 343 51 03 washer 4,75 2 *

10 263 343 51 04 washer 4,85 2 *

10 263 343 51 05 washer 4,95 2 *

10 263 343 51 06 washer 5,05 2 *

10 263 343 51 07 washer 5,15 2 *

10 263 343 51 08 washer 5,25 2 *

10 263 343 51 09 washer 5,35 2 *

11 000 914 20 12 washer 2

12 000 921 36 12 compression spring 3,6x24,4x84,1 2

13 264 343 38 01 spring plate 2

14 263 305 12 28 clutch release sleeve ANSI 16/32/13Z.i 1

15 000 981 22 05 gear pump 1 includes pos. 16-28

16 000 963 04 65 O-Ring 47x2,5-V80 1

17 9 045 311 261 1 socket head screw ISO 4762 M10x140-8.8 2

18 000 944 12 09 valve 1 includes pos. 19-28

19 000 962 49 00 back-up ring 25/29/1 2

20 000 963 22 11 o-ring 22,3x2,4-V80 1

21 000 962 49 01 back-up ring 23/27/1 2

Servopiston and gear pump

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

02/04 /02 print no.1313 804 90 01 28.10.2009

02

Page 145: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

22 000 963 02 67 O-Ring 24x2,5-V80 1

23 000 963 22 49 o ring ISO 6149 29,6x2,9-V80 1

24 ---------- 4 valve 1

25 000 963 00 62 O-ring 1

26 000 973 63 37 magnet coil 12DU 1

27 000 963 22 07 O-Ring ISO 3601-1 21,89x2,62-P90 1

28 000 904 60 77 nut M18x1,5 1

29 1313 341 03 01 valve housing 1

30 000 963 21 52 o-ring 18x2,5-V80 1

31 9 305 003 014 washer DIN 1440 6X12X1.6-1440ST-A2C 4

32 9 007 316 144 hexagon head bolt ISO 4014 M6x55-8.8-A2C 4

Servopiston and gear pump

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/04 /03

02

Page 146: H25CT Manual+Linde
Page 147: H25CT Manual+Linde
Page 148: H25CT Manual+Linde

Port plate housing and valves

22018035201.tif

02/05 /00 print no.1313 804 90 01 28.10.2009

02

Page 149: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 2201 300 03 01 port plate housing assy. 1

2 000 903 32 92 screw plug M8x1 9 with pos. 3only to be tightened once!

3 000 963 00 29 o ring ISO 8434-1 6x1,5-V80 9

4 000 944 33 16 pressure relief valve VD9-BE02 435bar/2 2 includes pos. 5-7

5 000 962 49 28 ring A28x2x1 2

6 000 963 22 08 o-ring 22,2x3-V80 2

7 000 963 22 38 o-ring ISO 3601-1 21,95x1,78-V80 2

8 9 148 010 196 1 screw plug WN 14141 M22x1,5-V80-A2C 2 with Pos. 9

9 000 963 22 16 o-ring ISO 3601-1 23,52x1,78-V80 2

10 000 952 40 26 screw plug M14x1,5 1

600 340 50 25 pressure rel. valve assy. 19 bar 1 includes pos. 11-16

11 000 963 21 07 o ring 12,3X2,4-V80 1

12 ---------- 4 valve sleeve 1

13 ---------- 4 valve piston 1

14 000 921 13 10 compression spring 1,3x6,5x25,2 1

15 9 289 003 010 1 shim DIN 988 DIN 988-4X8X0,1 a.req.

15 9 289 003 013 1 shim DIN 988 DIN 988-4X8X0,5 a.req.

16 ---------- 4 screw plug 1

17 000 963 20 31 o ring 5x1,5-V80 1

18 000 962 27 53 ring 1

19 264 343 05 00 ball pin 1

20 9 243 281 140 1 locknut WN 14302 M12-8.8 1

21 9 371 600 363 1 cylindrical pin WN 14514 WN 14514-8M6X12 1

22 000 963 15 06 formed sealing ring 1

23 000 963 11 14 o ring 1

24 9 045 341 311 1 socket-head screw ISO 4762 M12x75-10.9 10

Port plate housing and valves

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/05 /01

02

Page 150: H25CT Manual+Linde
Page 151: H25CT Manual+Linde
Page 152: H25CT Manual+Linde

Remote control E2 (4-16 bar) non bleed

22018035600.TIF

02/06 /00 print no.1313 804 90 01 28.10.2009

02

Page 153: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

584 340 37 55 remote control assy. E2 4-16bar/DIN 12V 1 includes pos. 1-46

1 584 340 70 11 housing assy. E2 DIN 1

2 584 345 04 16 piston 1

4 584 343 38 15 spring plate 18,99 mm 2 *

4 584 343 38 16 spring plate 19,01 mm 2 * * = optionally

4 584 343 38 17 spring plate 19,03 mm 2 *

4 584 343 38 18 spring plate 19,05 mm 2 *

4 584 343 38 19 spring plate 19,07 mm 2 *

5 000 921 36 62 compression spring 3,6x27,4x49,1x3,7 2 4-16 bar

6 584 343 38 13 spring plate 2

7 000 963 23 29 o-ring ISO 3601-1 36,17x2,62-V80 2

8 584 343 55 45 screw plug 2

9 584 343 63 02 washer locking 2

10 000 903 70 42 threaded pin M8x40-22H-geh. 2

11 9 243 281 110 1 collar nut WN 14302 WN 14302-M8-8 2

12 506 301 36 02 lever 1

13 584 345 02 02 pilot 1

14 000 921 06 27 spring 1

15 000 963 21 29 o ring ISO 8434-1 16,3x2,4-V80 1

16 584 343 57 10 bolt banjo 1

17 584 343 63 04 washer locking 1

18 000 914 06 12 washer 6,4x14x1,5-A2C 3

19 9 045 316 126 1 socket-head screw ISO 4762 M6x12-8.8-A2C 3

20 584 345 03 49 valve piston 1

21 000 922 66 02 spring 1

22 9 148 011 176 1 plug screw WN 14141 M18x1,5-V80-A2C 1

23 584 345 21 06 bush piston 2

Remote control E2 (4-16 bar) non bleed

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/06 /01

02

Page 154: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

24 000 921 05 13 spring 2

25 000 921 20 76 spring compression 2,0x12,0x18,0x2,8 2

26 584 343 38 67 spring plate 2

27 584 345 03 31 valve piston 2

685 340 57 03 magnet assy. 2 with pos. 28-32

685 340 57 01 magnet assy. 12V 1 with pos. 28,31-34

28 000 963 21 63 o-ring ISO 3601-1 14x1,8-V80 3

29 000 973 61 30 magnet 2

30 000 973 63 09 coil magnet 2

31 000 963 21 49 o-ring DIN 3770 19x2,5-V80 3

32 000 904 60 63 nut 3

33 000 973 61 17 magnet 1

34 000 973 63 01 coil magnet 12V AMP 1

35 000 921 20 79 spring compression 2,0x10,8x13,0x1,8 1

36 000 921 08 48 spring compression 0,8x5,7x14,4x5,5 1

37 584 345 10 10 valve sleeve 1

38 584 345 03 32 valve piston 1

39 584 345 10 05 valve sleeve 1

40 9 516 003 202 1 ball DIN 5401 5-G20 1

41 000 951 51 27 stopper HK5x6x43AK 9

42 000 901 01 96 socket head screw 1

43 000 963 20 41 o-ring 8,2x1,5-V80 1

44 000 952 40 46 plug screw 5 with pos. 45

45 000 963 00 29 o ring ISO 8434-1 6x1,5-V80 5

46 000 952 40 26 screw plug M14x1,5 3

47 000 952 40 46 plug screw 2 with pos. 48

48 000 963 00 29 o ring ISO 8434-1 6x1,5-V80 2

Remote control E2 (4-16 bar) non bleed

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

02/06 /02 print no.1313 804 90 01 28.10.2009

02

Page 155: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

49 000 903 75 10 nozzle WN 42775 D2,1-M6-St 2

50 000 963 08 05 o ring 1

51 000 963 21 14 o-ring 10.5x1.5-V80 5

52 9 384 620 450 1 pin DIN 7346 11x10 4

53 506 323 19 02 spacer 1

54 9 048 348 183 1 socket-head screw Y7984-M8x25-10.9PH 2 Loctite nr. 648

55 9 289 003 109 1 shim DIN 988 12X18X0.5 a.req.

55 9 289 003 110 1 shim DIN 988 DIN 988-12X18X0,1 a.req.

56 9 455 622 113 1 retaining ring DIN 471 12X1-472 1

57 9 045 348 186 1 screw ISO 4762 M8x30-10.9-PHR 4

Remote control E2 (4-16 bar) non bleed

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/06 /03

02

Page 156: H25CT Manual+Linde
Page 157: H25CT Manual+Linde
Page 158: H25CT Manual+Linde

Service units

22018039600.TIF

02/07 /00 print no.1313 804 90 01 28.10.2009

02

Page 159: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 2201 000 95 01 service unit HPV75/HMF75 1

2 2201 320 99 00 set of seals 1

Service units

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/07 /01

02

Page 160: H25CT Manual+Linde
Page 161: H25CT Manual+Linde
Page 162: H25CT Manual+Linde

brake valve

6748036211.tif

02/08 /00 print no.1313 804 90 01 28.10.2009

02

Page 163: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

674 340 61 11 brake valve assy. 1 includes pos. 1-14

1 674 341 01 03 housing 1

2 674 345 04 04 piston 1

3 000 928 18 03 seal ring shaft 10x16x4-P70 1

4 000 914 10 44 spacer 1

5 9 456 622 214 1 circlip DIN 472 20x1 1

6 000 962 55 23 boot 1

7 674 343 38 04 spring plate 1

8 9 464 620 060 1 snap ring DIN 7993 1

9 000 921 12 35 compression spring 1,2x12,9x38x6,4 1

10 674 343 38 03 spring plate 1

11 000 963 02 65 o ring 24x3-V80 1

12 9 464 621 240 1 circlip DIN 7993 1

14 9 124 311 256 1 stud threaded DIN 939 M10x100-8.8-A2C 1

brake valve

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 02/08 /01

02

Page 164: H25CT Manual+Linde
Page 165: H25CT Manual+Linde

Register 03 : CHASSIS UNIT03/01 00 - 02 CHASSIS AND COUNTERWEIGHT03/02 00 - 03 HOOD & COVERINGS03/03 00 - 01 FRONT CONSOLE03/04 00 - 01 DAMPING MATS03/05 00 - 01 DRIVER SEAT (STANDARD)03/06 00 - 01 DRIVER SEAT MSG6503/07 00 - 01 DRIVERS CAB REAR-VIEW MIRROR

H25/27/30/32

28.10.2009 print no.1313 804 90 01

03

Page 166: H25CT Manual+Linde
Page 167: H25CT Manual+Linde
Page 168: H25CT Manual+Linde

CHASSIS AND COUNTERWEIGHT

13138030301.tif

03/01 /00 print no.1313 804 90 01 28.10.2009

03

Page 169: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 400 30 15 .hassis assy. 1

2 1313 430 30 02 rear wall assy. back 1 overhead guard standard

2 1313 430 70 04 overhead guard assy.-Rear 1 overhead guard low

3 1313 430 70 03 overhead guard assy.-Front 1 overhead guard low

3 1313 430 70 05 overhead guard assy. front 1 overhead guard standard

4 1313 613 03 15 counterweight H25 1 H25

4 1313 613 03 17 counterweight H27 1 H27

4 1313 613 03 11 counterweight H30 1 H30

4 1313 613 03 13 counterweight H32 1 H32

5 1313 430 82 00 support assy. 1

6 9 008 311 132 hexagon head screw ISO 4017 M6x20-8.8-A2C 4

7 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 4

8 9 008 311 298 hexagon head screw ISO 4017 M12x30-8.8-A2C 4

9 9 309 412 022 washer DIN 7349 DIN 7349-13x30x6-A2C 4

10 9 008 316 413 hexagon head screw M16x55-8.8-A2C 2

11 9 309 412 028 washer DIN 7349 17-ST50-A2C 2

12 9 008 313 422 hexagon head screw ISO 4017 M16x100-8.8-A2C 2

13 9 309 412 028 washer DIN 7349 17-ST50-A2C 2

14 9 008 316 611 hexagon head screw M24x70-8.8-A2C 2

15 9 007 316 617 hexagon head bolt ISO 4014 M24x100-8.8-A2C 4

16 9 311 608 038 washer DIN 6340 25-DAC 6

17 1313 611 30 02 cover 1

18 9 008 311 175 hexagon head screw ISO 4017 M8x12-8.8-A2C 2

19 9 292 009 017 washer ISO 7089 A8,4-St50-A2R 2

20 1313 441 58 05 support 1

21 9 292 009 017 washer ISO 7089 A8,4-St50-A2R 2

22 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

CHASSIS AND COUNTERWEIGHT

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/01 /01

03

Page 170: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

23 1313 441 58 04 support 1

24 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

25 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

26 1313 441 58 03 support 1 4th function only

27 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2 4th function only

28 9 210 281 110 nut ISO 4032 934-M8-8A2C 2 4th function only

29 1313 431 10 02 step plate right 1

30 1313 431 10 03 step plate left 1

31 9 062 311 183 countersunk screw ISO 10642 7991-M8x25-8.8A2C 6

32 000 912 42 11 bolt ( Tow pin) 1

33 9 010 317 445 hexagon head bolt M22x1,5x90-8.8-A2C 6

34 000 916 20 22 bushing 23x40x45 2

35 000 914 23 07 washer 4

36 1313 116 08 02 cover sheet 1 not used on radiator screen option

37 9 008 311 132 hexagon head screw ISO 4017 M6x20-8.8-A2C 2 not used on radiator screen option

38 9 307 003 014 washer ISO 7093 B6,4-ST-A2C 2 not used on radiator screen option

39 7 9149 90 752 cable grommet 4/2 used only with standard auxiliaryhydraulic

40 000 962 65 05 plug WN 17253 4

41 1313 401 27 07 floorplate 1

42 9 308 003 018 washer ISO 7093-1 8-200HV-A2C 4

43 9 090 318 180 screw raised head ISO 7380 M8x20-8.8-A2R 4

CHASSIS AND COUNTERWEIGHT

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

03/01 /02 print no.1313 804 90 01 28.10.2009

03

Page 171: H25CT Manual+Linde
Page 172: H25CT Manual+Linde

HOOD & COVERINGS

13138030302.tif

03/02 /00 print no.1313 804 90 01 28.10.2009

03

Page 173: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 430 06 00 motor hood assy. 1

2 1313 430 09 00 hinge assy. 2

3 000 965 56 73 gas spring 1

4 1313 613 07 00 support 1

5 1313 430 14 00 cover sheet assy. 1

6 1313 430 14 01 cover sheet assy. 1

7 1313 430 14 06 cover sheet assy. 1

8 1313 430 23 01 strut assy. 1

9 335 433 56 06 covering 1

10 1313 432 42 05 covering 1

11 1313 432 42 06 covering 1

12 1313 432 42 07 covering 1

13 1313 432 42 08 covering 1

14 1313 570 11 11 console assy. 1 H25H27

14 1313 570 11 13 console assy. 1 H30H32

15 1313 610 08 01 rear panelling assy. 1

16 000 964 36 37 profile rubber 3425mm 1

19 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C 4

20 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 4

21 000 907 33 17 locking disc A10x0,6 2

22 9 265 316 110 nut hexagon DIN 6923 M8-8-A2C 2

23 9 008 311 300 hexagon head screw ISO 4017 M12x35-8.8-A2C 2

24 9 291 003 022 washer ISO 7090 B12-HV200-A2C 2

25 9 310 003 022 washer/shim/disc DIN 7989 2

26 000 964 13 40 strip sectional clamping 2

27 000 964 03 19 cable grommet 13/9x9 4

HOOD & COVERINGS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/02 /01

03

Page 174: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

28 9 008 311 302 hexagon head screw ISO 4017 M12x40-8.8-A2C 4

29 000 914 10 14 washer 2

30 9 062 311 183 countersunk screw ISO 10642 7991-M8x25-8.8A2C 2

31 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

32 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

33 9 308 003 018 washer ISO 7093-1 8-200HV-A2C 4

34 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 4

35 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 4

36 9 045 316 190 socket-head screw ISO 4762 M8x40-8.8-A2C 2

37 9 045 316 201 screw cap hd ISO 4762 M8x80-8.8-A2C 2

38 9 090 316 180 screw raised head ISO 7380 M8x20-8.8-A2C 4

39 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 4

40 9 008 311 295 hexagon head screw ISO 4017 M12x25-8.8-A2C 4

41 9 291 003 022 washer ISO 7090 B12-HV200-A2C 4

42 000 962 65 01 plug pipe WN 17253 H8.5X2-BLACK 2

43 000 964 38 09 cap 2

44 000 962 01 03 pipe plug WN 17253 WN 17253-10,9x9,5 2

45 000 936 32 24 lock 1

46 000 936 34 01 retainer plate 1

47 000 931 38 31 bracket 1

48 9 045 316 097 socket head screw M5X14-8.8-A2C 1

49 9 294 003 012 washer ISO 7092 5,3-200HV-A2C 1

50 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 4

51 9 291 003 020 washer ISO 7090 B10,5x20x2-HV200-A2C 4

52 9 309 412 014 washer DIN 7349 DIN 7349-6,4x17x3A2C 1

53 000 916 09 22 bush 2

54 000 965 22 01 rubber bumper DIN 95364 2

HOOD & COVERINGS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

03/02 /02 print no.1313 804 90 01 28.10.2009

03

Page 175: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

55 9 292 009 017 washer ISO 7089 A8,4-St50-A2R 2

56 9 007 311 197 hexagon head bolt ISO 4014 M8x60-8.8-A2C 2

HOOD & COVERINGS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/02 /03

03

Page 176: H25CT Manual+Linde
Page 177: H25CT Manual+Linde
Page 178: H25CT Manual+Linde

FRONT CONSOLE

13138030303.tif

03/03 /00 print no.1313 804 90 01 28.10.2009

03

Page 179: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 438 18 03 console 1

2 1313 438 14 00 support 3

3 1313 438 14 01 support 3

4 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 6

5 9 045 316 128 socket head screw ISO 4762 M6x16-8.8-A2C 6

6 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 6

7 9 008 311 132 hexagon head screw ISO 4017 M6x20-8.8-A2C 6

8 9 113 604 379 screw ISO 7049 6

9 9 309 412 012 washer DIN 7349 DIN 7349-5,3-ST-A2A 6

10 391 543 16 00 panelling 1

11 391 543 16 01 panelling 1

12 000 962 00 13 plug 1

13 000 931 40 33 clamp 6

14 000 962 00 16 plug without emergency switch 1

FRONT CONSOLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/03 /01

03

Page 180: H25CT Manual+Linde
Page 181: H25CT Manual+Linde
Page 182: H25CT Manual+Linde

DAMPING MATS

13138030304.tif

03/04 /00 print no.1313 804 90 01 28.10.2009

03

Page 183: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 432 03 03 damping mat TOP 1

2 1313 432 03 00 damping mat RIGHT 1

3 1313 432 03 01 damping mat LEFT 1

4 1313 432 03 04 damping mat front 1

5 1313 431 30 00 floormat single pedal 1 only in connection with single pedal

5 1313 431 30 01 floormat dual pedal 1 only in connection with dual pedal

6 000 962 50 10 locking disc n.Bed.

DAMPING MATS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/04 /01

03

Page 184: H25CT Manual+Linde
Page 185: H25CT Manual+Linde
Page 186: H25CT Manual+Linde

DRIVER SEAT (STANDARD)

13138030310.tif

03/05 /00 print no.1313 804 90 01 28.10.2009

03

Page 187: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

346 433 10 00 driver seat GS15 1 Standard , imitation leather covering

1 2048666 ***** 1 version imitation leather covering

2 2048665 ***** 1 version imitation leather covering

3 - 1

4 - 1

5 1185638 ***** 1

6 113753 ***** 2

7 113687 ***** 1

8 132796 ***** 2

9 130106 ***** 1

10 2048213 ***** 1

11 125687 ***** 1

12 2048259 ***** 1

13 112985 ***** 2

14 86601069 ***** 1

15 1313 433 19 02 support seat entry handle 1

16 1313 433 14 00 handle seat entry 1

17 9 090 356 178 screw raised head ISO 7380 M8x16-10.9-DAC-sw 3

18 9 090 347 241 button head screw ISO 7380 M10x30-10.9-A2R 1

DRIVER SEAT (STANDARD)

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/05 /01

03

Page 188: H25CT Manual+Linde
Page 189: H25CT Manual+Linde
Page 190: H25CT Manual+Linde

DRIVER SEAT MSG65

13138030305b.tif

03/06 /00 print no.1313 804 90 01 28.10.2009

03

Page 191: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

386 433 10 00 driver seat 1 Standard , imitation leather covering

386 433 10 01 driver seat 1 Comfort , fabric

1 5060 433 26 02 upholstery 1 version imitation leather covering

1 386 433 80 01 upholstery 1 version fabric

2 386 433 80 00 upholstery 1 version imitation leather covering

2 386 433 80 02 upholstery 1 version fabric

3 392 433 75 00 shock absorber 1

4 386 433 85 00 seat belt 1

5 386 433 14 02 handle 1

6 386 433 14 00 handle 1

7 392 433 14 05 handle 1

8 386 433 14 01 handle 1 version Comfort

9 000 973 29 58 switch seat cushion 1

10 386 381 03 95 harness 1

11 386 433 18 00 seat guide 1

12 000 918 53 41 shackle 2

13 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 4

14 9 265 316 110 nut hexagon DIN 6923 M8-8-A2C 4

15 300 433 05 02 angle 1

16 1313 433 19 10 support entry handle 1

17 1313 433 14 00 handle seat entry 1

18 000 904 08 20 hexagon nut M8x29,5/SW13 1

19 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

20 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

21 9 215 317 110 nut hexagon ISO 7040 M8-8-A2C 1

22 9 090 356 178 screw raised head ISO 7380 M8x16-10.9-DAC-sw 2

DRIVER SEAT MSG65

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/06 /01

03

Page 192: H25CT Manual+Linde
Page 193: H25CT Manual+Linde
Page 194: H25CT Manual+Linde

DRIVERS CAB REAR-VIEW MIRROR

13138030307.tif

03/07 /00 print no.1313 804 90 01 28.10.2009

03

Page 195: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 994 10 29 rear-view mirror Panorama 1 panorama

2 1313 430 82 04 support assy. 1 panorama

3 9 292 009 017 1 washer ISO 7089 A8,4-St50-A2R 1 panorama

4 9 008 316 197 1 hexagon head screw ISO 4017 M8x60-8.8-A2C 1 panorama

5 000 994 10 15 rear-view mirror 143x195 2

6 000 994 13 05 support 2

7 1313 437 73 04 angle right 1

8 9 045 316 128 1 socket head screw ISO 4762 M6x16-8.8-A2C 4

9 9 292 003 014 1 washer ISO 7089 A6,4-ST50-A2C 4

10 9 045 311 177 1 socket-head screw ISO 4762 M8x16-8.8-A2C 4

11 9 292 003 018 1 washer ISO 7089 A8,4-ST50-A2C 4

12 1313 437 73 03 angle left 1

DRIVERS CAB REAR-VIEW MIRROR

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 03/07 /01

03

Page 196: H25CT Manual+Linde
Page 197: H25CT Manual+Linde

Register 04 : STEERING AND WHEELS04/01 00 - 02 HYDROSTATIC STEERING WITH LINES04/02 00 - 03 STEERING AXLE04/03 00 - 02 WHEELS AND TYRES

H25/27/30/32

28.10.2009 print no.1313 804 90 01

04

Page 198: H25CT Manual+Linde
Page 199: H25CT Manual+Linde
Page 200: H25CT Manual+Linde

HYDROSTATIC STEERING WITH LINES

13138030401.tif

04/01 /00 print no.1313 804 90 01 28.10.2009

04

Page 201: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 392 542 12 05 steering control valve 1

2 391 540 13 00 steering column assy. 1

3 000 964 23 48 bush steer column 1

4 9 008 311 233 1 hexagon head screw ISO 4017 M10x16-8.8-A2C 4

5 9 294 003 020 washer ISO 7092 10-200HV-A2C 4

6 392 543 31 00 clamping holder st/column support 1

7 000 930 24 11 handle assy. 1

8 000 917 18 29 pipe 1

9 9 308 003 020 1 washer ISO 7093 10,5-200HV-A2C 1

10 000 905 11 00 nut 1

11 9 214 317 130 1 hexagon nut ISO 7042 M10-8-A2C 1

12 000 964 37 52 protective cap 2

13 7 9125 03 024 contact 1

14 9 211 281 176 nut hexagon DIN 936 M18x1,5-17H-A2C 1

15 9 291 003 033 washer ISO 7090 B21-ST50-A2C 1

16 000 991 02 05 steering wheel 1

17 000 991 01 02 signal button 1

18 000 991 03 06 handle 1

19 391 543 22 06 support 1

20 9 008 311 195 hexagon head screw ISO 4017 M8x50-8.8-A2C 1

21 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

22 1313 441 32 06 hose line 2

23 9 721 002 010 pipe union ISO 8434-1 SDS-L10xM14x1,5-type E-A3C-V 2

24 000 955 08 15 clamp hose 2

25 1313 441 32 16 hose line 1

26 9 170 281 080 banjo union DIN 7643 2

27 000 962 04 37 seal ring 14x22x1,5-V80 4

HYDROSTATIC STEERING WITH LINES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 04/01 /01

04

Page 202: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

28 9 170 281 060 bolt banjo DIN 7643 8-7643ST-A3C 1

29 000 962 04 36 seal 12x19x1,5-V80 2

30 1313 441 32 17 hose line 1

31 9 170 281 130 bolt banjo DIN 7643 15-ST-7643-A3C 1

32 000 962 04 38 seal ring 18x26,5x2-V80 2

37 ---------- 5 piece connection 1 see illustration 07/03

39 ---------- 5 o ring 1 see illustration 07/03

41 391 543 22 10 support 1

42 9 008 311 126 1 hexagon head screw ISO 4017 M6x12-8.8-A2C 2

43 000 918 50 44 joining plate 1

44 9 078 316 066 1 button head screw ISO 14583 M4X12-8.8-A2C 2

HYDROSTATIC STEERING WITH LINES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

04/01 /02 print no.1313 804 90 01 28.10.2009

04

Page 203: H25CT Manual+Linde
Page 204: H25CT Manual+Linde

STEERING AXLE

13138030402.tif

04/02 /00 print no.1313 804 90 01 28.10.2009

04

Page 205: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

302 000 25 16 steering axle AL30-01 1 = pos. 1-43

1 302 451 04 02 beam axle 1

2 302 453 03 04 stub axle l/h 1

2a 302 453 03 03 stub axle right 1

R1 302 450 90 00 repair kit 2 = pos. 3, 6for 302.453.03.03/04 bottom

R2 302 450 90 01 repair kit assy. 2 = pos. 3a, 3b, 6for 302.453.03.03/04 top

3 ---------- 4 tapered roller bearing 2

3a ---------- 4 bearing tapered roller 33,338x73,025 2

3b 000 961 03 15 seal 2

4 000 917 40 04 pipe 2

5 000 914 33 09 washer 2

6 000 962 26 28 wiper ring A54X73X6P 4

7 000 910 05 05 spacer ring assy. 2 = pos. 7-7a

7a 000 963 23 19 o-ring ISO 8434-1 33,3x2,4-NBR70 2

8 302 453 02 16 swivel pin 2

9 000 914 19 04 washer 19x42x8 2

10 9 212 341 176 nut hexagon DIN 985 NM18x1,5-10-A2C 2

302 450 15 02 wheel hub assy. 2 = pos. 11-12

11 302 454 02 04 wheel hub 2

12 000 912 89 02 1 wheel bolt B-21M18X1.5X50-14501 10

13 9 270 341 176 1 nut wheel DIN 74361 A18-10-A2C 10

14 000 924 73 14 tapered roller bearing 50X82-N 2

15 000 924 73 97 bearing 31,75x59,131 2

16 000 928 03 41 shaft seal ring AS65x85x12-P80 2

17 000 914 16 13 washer 2

18 9 214 317 166 1 hexagon nut ISO 10513 VM16x1,5-8-A2C 2

STEERING AXLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 04/02 /01

04

Page 206: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

19 9 380 620 257 1 spring dowel sleeve ISO 8752 5x12-ST 2

20 342 454 03 00 wheel cap 2

21 9 008 311 302 1 hexagon head screw ISO 4017 M12x40-8.8-A2C 2

22 9 210 281 140 1 hexagon nut ISO 4032 DIN 934-M12-8A2C 2

23 302 450 13 08 rod tie assy. 2 = pos. 23-26

24 000 924 96 40 bearing 20X42X16/24 4

25 9 607 021 060 1 lubrication nipple DIN 71412 AM6 8

26 000 961 04 31 1 seal ring 8

27 000 912 21 79 bolt 4

28 9 384 620 317 1 spring cotter DIN 7346 DIN 7346-6x28 8

302 540 42 24 cylinder assy 1 = pos. 29-39

29 302 452 18 08 cylinder 1

30 302 490 20 02 rod piston assy. 1

R3 302 450 90 03 repair kit assy. 1 2x pos. 31 , 1x pos. with tail lights , 1x po

31 ---------- 4 bush assy. 2 pos. 33 - 36

32 ---------- 4 sleeve 2 only for assembly

33 ---------- 4 bush 2

34 ---------- 4 seal ring grooved 55-65-7,3 2

35 ---------- 4 wiper 2

36 ---------- 4 o-ring ISO 3601-1 A-C0750-75x3,55-N-NBR90 2

36a ---------- 4 seal ring 64,5x80x6 1

37 000 907 11 28 snap ring 2

38 9 721 002 010 1 pipe union ISO 8434-1 SDS-L10xM14x1,5-type E-A3C-V 2

39 7 7777 01 063 1 cap screw M16x1,5 2

40 9 384 621 744 1 spring cotter DIN 7346 DIN 7346-21X30 2

STEERING AXLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

04/02 /02 print no.1313 804 90 01 28.10.2009

04

Page 207: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

41 9 010 312 305 1 hexagon head bolt ISO 8765 M16x1,5x100-8.8 4

43 000 964 01 22 bumper 2

44 000 918 58 04 plate joining 2

45 9 045 316 414 1 screw socket head ISO 4762 M16x60-8.8-A2C 4

STEERING AXLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 04/02 /03

04

Page 208: H25CT Manual+Linde
Page 209: H25CT Manual+Linde
Page 210: H25CT Manual+Linde

WHEELS AND TYRES

13138030403a.tif

04/03 /00 print no.1313 804 90 01 28.10.2009

04

Page 211: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

000 990 26 06 solid wheel assy 21x7x15 2 pos. 1 / 2 , H25 smooth

000 990 26 31 solid wheel assy 21x7x15 non marking 2 pos. 1 / 2 , H25 non mark wheels

000 990 26 45 wheel assy Cushion 21x7x15 Treaded 2 pos. 1 / 2a , H25 treaded

000 990 26 07 solid wheel assy 21x8x15 2 pos. 1 / 2 , H27 - H32 smooth

000 990 26 32 solid wheel assy 21x8x15 non marking 2 pos. 1 / 2 , H27 - H32 non mark wheels

000 990 26 46 wheel assy Cushion 21x8x15 Treaded 2 pos. 1 / 2a , H27 - H32 treaded

1 000 993 23 28 wheel disc 7x15 2

2 9 815 200 366 tire solid 21x7x15, smooth 2 H25 smooth

9 815 265 366 tire solid 21x7x15 non marking,SM 2 H25 non mark wheels

9 815 200 367 tire solid 21x8x15,SM 2 H27 - H32 smooth

9 815 265 367 tire solid 21x8x15 non marking,SM 2 H27 - H32 non mark wheels

2a 9 815 283 366 tire Cushion 21x7x15 Treaded 2 H25 treaded

9 815 283 367 tire Cushion 21x8x15 Treaded 2 H27 - H32 treaded

000 990 26 08 solid wheel assy 16x5x10.5 2 pos. 3 / 4 , H25 smooth

000 990 26 33 solid wheel assy 16x5x10.5 non marking 2 pos. 3 / 4 , H25 non mark wheels

000 990 26 47 wheel assy Cushion 16x5x10 1/2 Treaded 2 pos. 3 / 4a , H25 treaded

000 990 26 09 solid wheel assy 16x6x10.5 2 pos. 3 / 4 , H27 - H32 smooth

000 990 26 34 solid wheel assy 16x6x10.5 non marking 2 pos. 3 / 4 , H27 - H32 non mark wheels

000 990 26 48 wheel assy Cushion 16x6x10 1/2 Treaded 2 pos. 3 / 4a , H27 - H32 treaded

3 000 993 23 32 wheel disc 5x10.5 2

4 9 815 200 287 tire solid 16x5x10.5, SM 2 H25 smooth

9 815 265 287 tire solid 16x5x10.5 non marking, SM 2 H25 non mark wheels

9 815 200 288 tire solid 16x6x10.5, SM 2 H27 - H32 smooth

9 815 265 288 tire solid 16x6x10.5 non marking, SM 2 H27 - H32 non mark wheels

4a 9 815 283 287 tire Cushion 16x5x10 1/2 Treaded 2 H25 treaded

9 815 283 288 tire Cushion 16x6x10.5 Treaded 2 H27 - H32 treaded

WHEELS AND TYRES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 04/03 /01

04

Page 212: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

5 000 901 18 13 bolt hex flange DIN 6921 M14X1X40-6921DAC 28

6 9 270 341 176 nut wheel DIN 74361 A18-10-A2C 10

7 000 964 37 18 cap protective hex. 24X30 10

8 7 0331 49 015 tape Antistatic 1

WHEELS AND TYRES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

04/03 /02 print no.1313 804 90 01 28.10.2009

04

Page 213: H25CT Manual+Linde

Register 05 : CONTROLS05/01 00 - 02 PEDAL OPERATION DUAL PEDALS05/02 00 - 02 PEDAL OPERATION SINGLE PEDAL05/03 00 - 01 PARKING BRAKE05/04 00 - 02 ACTUATOR OF PILOT VALVE05/05 00 - 01 TILTABLE ARMREST (optional equipment)05/06 00 - 02 TILT ANGLE SENSOR (optional equipment)

H25/27/30/32

28.10.2009 print no.1313 804 90 01

05

Page 214: H25CT Manual+Linde
Page 215: H25CT Manual+Linde
Page 216: H25CT Manual+Linde

PEDAL OPERATION DUAL PEDALS

13138030501.tif

05/01 /00 print no.1313 804 90 01 28.10.2009

05

Page 217: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 520 63 02 plate assy 1

2 000 964 27 00 pedal (covering) 2

3 000 964 45 91 pedal stop covering 1

4 335 527 30 06 bracket 1

5 9 027 068 142 screw truss head DIN 603 din 603 M6x45-4.6-A2C 4

6 1313 520 56 00 accelerator pedal assy right 1

7 000 924 80 41 needle bearing 12x18x14RS 6

8 000 964 37 38 protective cap 1

9 350 527 46 01 gear sensor 1

10 1313 520 56 02 accelerator pedal assy. 1

11 350 527 13 05 profil 1

12 335 527 30 07 bracket 1

13 000 921 20 27 spring 2X15.5X29.22 4

14 000 964 46 39 guide spring 2

15 9 214 317 090 nut hexagon ISO 7042 M6-8-A2C 4

18 000 913 12 04 rod pedal pivot 2

19 1313 520 26 00 brake pedal assy. 1

20 392 431 19 00 bearing block pedal assy 1

21 9 008 311 140 hexagon head screw ISO 4017 M6x40-8.8-A2C 1

22 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 1

23 000 922 17 02 spring 2,5x19,5x85,75 2

24 9 045 316 074 socket head screw ISO 4762 M4x25-8.8-A2C 1

25 350 527 47 00 pinion gear sensor 1

26 9 045 316 074 socket head screw ISO 4762 M4x25-8.8-A2C 2

27 9 292 003 010 washer ISO 7089 A4,3-ST50-A2C 2

28 9 133 339 140 screw grub DIN 913 M6x40-8.8-A2C 1

29 9 210 281 090 hexagon nut ISO 4032 DIN 934-M6-8A2C 1

PEDAL OPERATION DUAL PEDALS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 05/01 /01

05

Page 218: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

30 1313 431 15 01 floorplate 1

31 000 914 10 14 washer 4

32 9 062 311 183 countersunk screw ISO 10642 7991-M8x25-8.8A2C 4

33 7 9164 00 159 potentiometer 1

34 392 527 36 08 bearing block 1

35 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 4

36 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 4

37 9 008 311 244 hexagon head screw ISO 4017 M10x40-8.8-A2C 2

38 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 2

39 000 964 05 03 edge protection 17x200-sw 1

40 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 4

41 000 914 08 23 washer 8.1X39X4-ST (P) 4

42 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 2

43 9 308 003 020 washer ISO 7093 10,5-200HV-A2C 1

44 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 1

46 000 964 10 29 strip rubber 1

47 ---------- 5 brake valve assy. see illustration 05 / 02 and 02 /

PEDAL OPERATION DUAL PEDALS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

05/01 /02 print no.1313 804 90 01 28.10.2009

05

Page 219: H25CT Manual+Linde
Page 220: H25CT Manual+Linde

PEDAL OPERATION SINGLE PEDAL

13138030502.tif

05/02 /00 print no.1313 804 90 01 28.10.2009

05

Page 221: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 520 63 04 plate assy. 1

2 000 964 27 00 pedal (covering) 1

3 000 964 45 91 pedal stop covering 1

4 000 964 37 38 protective cap 2

5 350 527 46 01 gear sensor 2

6 9 133 339 140 screw grub DIN 913 M6x40-8.8-A2C 1

7 000 924 80 41 needle bearing 12x18x14RS 6

8 9 210 281 090 hexagon nut ISO 4032 DIN 934-M6-8A2C 1

9 000 913 12 11 rod 1

10 000 916 18 24 bushing 1

11 000 910 25 02 bush assy. 1 consist 2x pos. 7 and 1x pos. 10

12 1313 520 26 05 brake pedal assy 1

13 000 907 33 18 spring clip WN 14412-12 2

14 9 045 316 074 socket head screw ISO 4762 M4x25-8.8-A2C 8

15 350 527 47 00 pinion gear sensor 2

16 7 9164 00 159 potentiometer 1

17 9 292 003 010 washer ISO 7089 A4,3-ST50-A2C 4

18 9 008 311 244 hexagon head screw ISO 4017 M10x40-8.8-A2C 1

19 1313 520 56 05 accelerator pedal assy. 1

20 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 1

21 000 922 60 12 torsion spring 5,6x36,3x3,25 2

22 000 922 60 13 torsion spring 6,3x35,7x3,25 1

23 1313 527 06 05 support

24 9 133 339 193 screw DIN 913 M8x45-8.8 2

25 9 292 009 017 washer ISO 7089 A8,4-St50-A2R 2

26 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

30 1313 431 15 01 floorplate 1

PEDAL OPERATION SINGLE PEDAL

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 05/02 /01

05

Page 222: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

31 000 914 10 14 washer 4

32 9 062 311 183 countersunk screw ISO 10642 7991-M8x25-8.8A2C 4

39 000 964 05 03 edge protection 17x200-sw 1

40 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 4

41 9 308 003 018 washer ISO 7093-1 8-200HV-A2C 4

42 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 2

43 9 308 003 020 washer ISO 7093 10,5-200HV-A2C 1

44 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 1

46 000 964 10 29 strip rubber 1

51 ---------- 5 brake valve assy. 1 see illustration 02 / 06

52 1313 363 12 10 support 1

53 1313 363 12 09 support 1

54 000 912 16 38 bolt 1

55 000 907 33 15 retaining clip 8x0,5 3

56 000 918 50 08 plate joining 2

57 000 973 30 33 microswitch 2

58 9 008 311 045 hexagon head screw ISO 4017 M3x35-8.8-A2C 2

59 000 916 11 52 bushing 11x20x68,9 2

60 9 008 311 105 hexagon head screw ISO 4017 M5x25-8.8-A2C 2

61 9 210 281 070 hexagon nut ISO 4032 M5-8-A2C 2

62 ---------- 5 cable pull 1 see illustration 05 / 03

63 1313 360 47 02 potentiometer assy. 1 consist pos. 64-65

64 7 9164 51 536 potentiometer 1

65 1313 381 03 17 harness 1

PEDAL OPERATION SINGLE PEDAL

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

05/02 /02 print no.1313 804 90 01 28.10.2009

05

Page 223: H25CT Manual+Linde
Page 224: H25CT Manual+Linde

PARKING BRAKE

13138030503.tif

05/03 /00 print no.1313 804 90 01 28.10.2009

05

Page 225: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 391 510 01 02 hand brake lever assy. 1 = pos. 1-8

2 ---------- 4 lever 1

3 ---------- 4 support assy. 1

4 ---------- 4 lever 1

5 ---------- 4 ***** 1

6 9 460 620 040 1 locking disc DIN 6799 DIN 6799-4 1

7 000 922 08 01 tension spring 0,8x7x22,5 1

8 9 119 526 379 1 self tapping screw ST4,8x19-C-A2 2

9 9 045 316 096 1 socket-head screw ISO 4762 M5x12-8.8-A2C 1 loctite 243

10 9 292 003 012 1 washer ISO 7089 A5,3-ST-A2C 1

11 9 294 003 022 1 washer ISO 7092 13-ST50-A2C 1

12 391 510 04 02 lever assy. 1

13 000 907 33 17 locking disc A10x0,6 1

14 000 935 03 68 cable pull 1

15 000 907 33 21 locking disc A6X0.5-14412A2C 1

16 000 922 13 03 tension spring 1.6x10x55 1

17 9 758 025 070 clip pipe DIN 1592 7x6,6-bk-A2C 1

18 000 904 60 59 nut 1

20 ---------- 5 brake valve assy. see illustration 02 / 06

21 000 907 33 18 spring clip WN 14412-12 1

PARKING BRAKE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 05/03 /01

05

Page 226: H25CT Manual+Linde
Page 227: H25CT Manual+Linde
Page 228: H25CT Manual+Linde

ACTUATOR OF PILOT VALVE

13138030504.tif

05/04 /00 print no.1313 804 90 01 28.10.2009

05

Page 229: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 7 9190 40 044 joystick single lever 1

2 7 9190 40 043 joystick double lever 1/2

7 000 931 01 60 handle single/double lever 1/2

8 000 962 55 88 bellows single lever 1

9 000 962 55 89 bellows double lever 2

10 335 433 62 04 armrest no covering 1

11 335 437 94 00 covering armrest(to sample) 1 with fabric couvering version

12 335 433 11 02 support 1

13 000 913 06 07 rod 2

14 000 921 12 38 spring compression 1.25X15.75X320 2

15 000 931 05 14 handle star grip 1

16 000 931 05 13 handle star grip 1

17 392 430 14 16 cover sheet assy. 1

18 335 433 56 08 cover 1

19 300 430 82 00 support assy. 1

20 9 045 316 298 1 socket-head screw ISO 4762 M12x30-8.8-A2C 2

25 9 062 311 129 1 countersunk screw ISO 10642 M6x16-8.8-A2C 6

25 9 062 316 132 1 countersunk screw ISO 10642 7991-M6x20-8.8A2C 6 by annex pos. 26

26 335 433 34 03 console 1 single pedal

27 335 433 34 01 console bottom 1 single pedal

28 9 186 353 300 1 self tapping screw 4x20 A2C 8

29 000 931 01 42 handle 1

30 000 962 55 72 bellows 1

31 000 962 02 86 pipe plug 1 versionmast positioning / double pedal

32 000 918 25 00 diaphragm 2

33 392 433 56 03 covering without add hyd 1 version without auxiliary hydraulic

ACTUATOR OF PILOT VALVE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 05/04 /01

05

Page 230: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

34 000 931 40 29 clamp 2

35 000 973 29 49 switch forward reverse 1 single pedal

36 7 9125 03 462 housing tab 1

37 7 9149 99 023 seal 6P 2

38 7 9125 03 753 tab 0,5-1,0 a.req.

39 7 9149 99 019 seal 0,35-1 a.req.

40 7 9149 99 025 stopper a.req.

41 392 381 03 81 harness 1 dummy plugversion without auxiliary hydraulic

42 7 9125 03 149 housing 6 way 1

43 000 955 30 68 cable tie 4.6x205 1

44 7 7777 00 071 stopper 16X11-BLACK 1

47 392 363 42 30 angle 1

48 9 110 604 493 screw s/tapping ISO 1479 C6.3X13-A2C 1

49 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 1

50 335 433 56 08 cover 1

ACTUATOR OF PILOT VALVE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

05/04 /02 print no.1313 804 90 01 28.10.2009

05

Page 231: H25CT Manual+Linde
Page 232: H25CT Manual+Linde

TILTABLE ARMREST (optional equipment)

3468030510.tif

05/05 /00 print no.1313 804 90 01 28.10.2009

05

Page 233: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 300 430 11 00 covering assy. 1

2 300 436 34 02 retainer plate 1

3 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 6

4 9 045 316 125 socket head screw ISO 4762 6

5 300 430 82 01 support assy. 1

6 300 363 12 01 support 1

7 000 973 30 33 microswitch 1

8 9 098 610 183 screw sheet metal ISO 1481 ST2,9x16-C-A2C 2

9 000 965 56 80 gas spring 15-Hub 20mm 1

10 000 907 33 25 clip retaining 5X0.5 2

11 300 430 26 01 angle assy. 1

12 000 918 71 50 retainer plate 1

13 000 923 52 09 bearing bush 25x28x11,5 2

14 000 914 08 23 washer 8.1X39X4-ST (P) 1

15 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

16 300 363 12 00 support 1

17 000 955 30 68 cable tie 4.6x205 1

TILTABLE ARMREST (optional equipment)

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 05/05 /01

05

Page 234: H25CT Manual+Linde
Page 235: H25CT Manual+Linde
Page 236: H25CT Manual+Linde

TILT ANGLE SENSOR (optional equipment)

13138030505.tif

05/06 /00 print no.1313 804 90 01 28.10.2009

05

Page 237: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 527 06 06 support 1

2 9 045 341 243 screw ISO 4762 M10x35-10.9 2

3 9 294 003 020 washer ISO 7092 10-200HV-A2C 4

4 7 9164 00 104 potentiometer 1

5 9 292 003 010 washer ISO 7089 A4,3-ST50-A2C 2

6 9 045 316 074 socket head screw ISO 4762 M4x25-8.8-A2C 2

7 392 527 19 06 T-piece 1

8 1313 527 03 04 lever 1

9 9 008 311 183 hexagon head screw ISO 4017 M8x25-8.8-A2C 2

10 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

11 - 2

12 - 1

13 000 907 33 18 spring clip WN 14412-12 1

14 1313 527 06 07 support 2

15 9 210 281 110 nut ISO 4032 934-M8-8A2C 1

16 9 292 009 017 washer ISO 7089 A8,4-St50-A2R 1

17 000 961 91 60 seal 1

18 - 1

19 9 798 311 041 ball joint DIN 71802 CS13-Z71802-A2C (LE 1

20 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

21 9 796 470 060 fork clevis DIN 71752 G8x16-A2C 1

22 000 913 01 01 rod 1

23 000 934 25 03 bolt with cotter WN 17441 8x16 1

24 392 527 18 18 holding fixture 1

25 391 520 00 00 holding fixture assy. 1

26 300 527 46 00 gear 1

27 350 527 47 00 pinion gear sensor 1

TILT ANGLE SENSOR (optional equipment)

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 05/06 /01

05

Page 238: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

28 000 961 52 04 seal 1

29 9 045 316 102 screw ISO 4762 M5x20-8.8-A2C 3

30 9 464 621 220 snap ring DIN 7993 1

31 000 950 22 18 clip assy. a.req.

TILT ANGLE SENSOR (optional equipment)

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

05/06 /02 print no.1313 804 90 01 28.10.2009

05

Page 239: H25CT Manual+Linde

Register 06 : ELECTRIC EQUIPMENT06/01 00 - 02 ELECTRIC ARMATURES06/02 00 - 02 CENTRAL ELECTRICAL BOX AND CONTROLS06/03 00 - 02 BATTERY AND ACCESSORIES06/04 00 - 02 MAIN HARNESS LPG VERSION PART 106/05 00 - 02 MAIN HARNESS LPG VERSION PART 206/06 00 - 02 MAIN HARNESS LPG VERSION PART 306/07 00 - 01 VARIOUS CABLE LOOMS06/08 00 - 01 TRUCK LIGHTING, FLASH LIGHT AND DANGER SIGNAL06/09 00 - 01 WIRE HARNESS FOR LIGHTING06/10 00 - 01 HARNESS - CONTROL VALVE06/11 00 - 01 HARNESS LPG MONITORING06/12 00 - 01 CABLE TREES LEVEL INDICATOR

H25/27/30/32

28.10.2009 print no.1313 804 90 01

06

Page 240: H25CT Manual+Linde
Page 241: H25CT Manual+Linde
Page 242: H25CT Manual+Linde

ELECTRIC ARMATURES

13138030601.tif

06/01 /00 print no.1313 804 90 01 28.10.2009

06

Page 243: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 7 9154 92 632 key switch 1

2 000 946 08 11 indicator unit 1

3 9 186 353 237 cutting screw 3,5x10-10.9-A2K 4

4 9 292 003 010 washer ISO 7089 A4,3-ST50-A2C 4

6 000 975 50 07 cover a.req.

7 000 973 15 02 signal transmitter 12V 1

8 7 9154 98 510 emergency stop switch 1

9 9 008 311 098 hexagon head screw ISO 4017 M5x16-8.8-A2C 2

10 9 292 003 012 washer ISO 7089 A5,3-ST-A2C 2

11 000 931 01 66 handle 1

12 9 045 316 042 screw skt hd ISO 4762 M3x25-8.8-A2C 2

13 000 975 71 13 cable starter 1 only in connection with emergency-off

14 000 977 10 02 electric cable 1

15 9 008 311 175 hexagon head screw ISO 4017 M8x12-8.8-A2C 2

16 9 330 620 018 washer lock serrated DIN 6798 6798-A8,4-PHR 2

17 7 9110 00 223 nut pg16 1

18 000 973 04 18 key 1

19 1313 360 60 02 support assy. emergency switch 1

20 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

21 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

22 000 962 00 16 plug without emergency switch 1 without emergency-off switch

23 000 962 65 06 plug pipe WN 17253 H9.5X4.5-BLACK 2 without emergency-off switch

24 7 9154 90 603 switch toggle 1 for headlights

25 7 9154 90 623 switch toggle 1 for rear spotlight

26 1313 363 42 01 angle 1

27 000 904 60 59 nut 2

ELECTRIC ARMATURES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/01 /01

06

Page 244: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

28 1313 363 18 00 cover sheet 1

29 000 904 60 59 nut 1

30 000 917 14 22 spacer for pipe 1

32 9 007 311 197 hexagon head bolt ISO 4014 M8x60-8.8-A2C 1

33 000 975 71 12 cable starter 1 only in connection with emergency-off

34 000 962 45 03 gasket 1

35 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

ELECTRIC ARMATURES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

06/01 /02 print no.1313 804 90 01 28.10.2009

06

Page 245: H25CT Manual+Linde
Page 246: H25CT Manual+Linde

CENTRAL ELECTRICAL BOX AND CONTROLS

13138030602.tif

06/02 /00 print no.1313 804 90 01 28.10.2009

06

Page 247: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 363 12 06 support 1

2 9 008 311 128 hexagon head screw ISO 4017 M6x16-8.8-A2C 1

3 000 955 30 68 cable tie 4.6x205 1

4 392 363 04 06 housing 1

4 1313 363 04 00 housing 1 version LPS

5 392 363 19 02 cover 1

5 1313 363 19 00 cover 1 version LPS

6 392 363 19 01 cover 1

6 1313 363 19 01 cover 1 version LPS

10 392 363 12 01 support 1 version LP

10 1313 363 12 04 support relay 1 version LPS

11 9 265 316 090 hexagon nut EN 1661 M6-8-A2C 2

12 1313 006 30 68 control unit PL standard 1 EPA

1313 006 30 69 control unit PL California 1 CARB

13 000 937 01 09 strap tightening 3X20X142 2

14 390 360 10 19 electronic control unit assy. LHC-11/12 1

15 000 975 26 01 support 1

16 1313 432 42 00 covering 1

17 000 901 90 78 screw 2

18 1313 613 44 00 insulating piece 1

19 390 360 15 97 electronic control unit assy. LOC-10/10 1 version EPS

20 7 9125 03 404 housing tab 1 version without EPS

21 7 9125 03 314 interlocking 1 version without EPS

22 7 9190 86 804 fuse element DIN 72581 ds7,5-C7,5-32V a.req.

22 7 9190 86 803 fuse element DIN 72581 C5-32V a.req.

22 7 9190 86 805 fuse element DIN 72581 C10-32V a.req.

22 7 9190 86 806 fuse element DIN 72581 C15-32V a.req.

CENTRAL ELECTRICAL BOX AND CONTROLS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/02 /01

06

Page 248: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

22 7 9190 86 807 fuse element DIN 72581 C20-32V a.req.

23 7 9162 91 264 relay 12V 5 brake light / / working lamp Pos. 7 / 8 / US

24 390 360 51 18 electronic module assy. 1 level indicator , EPS option

25 000 973 13 15 relay 12v 70a 2 starting relay / starting relay

26 7 9125 03 454 housing tab 1

27 7 9125 12 005 tab 5

28 7 9149 99 901 seal 5

29 7 9149 99 024 plug 1

CENTRAL ELECTRICAL BOX AND CONTROLS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

06/02 /02 print no.1313 804 90 01 28.10.2009

06

Page 249: H25CT Manual+Linde
Page 250: H25CT Manual+Linde

BATTERY AND ACCESSORIES

13138030603a.tif

06/03 /00 print no.1313 804 90 01 28.10.2009

06

Page 251: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 975 75 99 cable starter 1 without emergency-off

2 000 970 45 00 terminal assy. 1

3 000 962 50 76 protective cap 1

4 9 008 311 128 hexagon head screw ISO 4017 M6x16-8.8-A2C 1

5 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 1

6 1313 363 12 11 support 1

7 000 975 70 61 earth cable 1

8 9 008 311 128 hexagon head screw ISO 4017 M6x16-8.8-A2C 1

9 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 1

10 ---------- 5 main harness 1

12 9 008 311 174 hexagon head screw ISO 4017 M8x10-8.8-A2C 1

13 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

14 ---------- 5 harness charging cable 1 see illustration 06 / 07

15 000 955 22 28 clip DIN 3016-1 D1-16X15-W1-1 1

16 9 265 316 070 nut hexagon EN 1661 M5-8-8A2C 1

17 ---------- 5 harness for grounding 1 see illustration 06 / 07

18 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 1

19 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

20 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 1

22 351 423 02 00 support 2

23 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

24 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

25 7 9199 00 223 battery DIN 72311 12V 45Ah 1

26 ---------- 5 washer plain DIN 6340 10,5 1

27 ---------- 5 nut EN 1661 M10-8-A2C 1

28 9 045 311 177 socket-head screw ISO 4762 M8x16-8.8-A2C 1

29 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

BATTERY AND ACCESSORIES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/03 /01

06

Page 252: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

30 9 323 620 018 spring washer DIN 137 DIN 137-B8-A2C 3

31 9 265 316 110 nut hexagon DIN 6923 M8-8-A2C 2

32 1313 360 60 00 support assy. 1

33 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

34 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

35 000 955 30 76 tie cable 1

36 000 901 11 04 screw 1

37 9 210 281 090 hexagon nut ISO 4032 DIN 934-M6-8A2C 1

38 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C 1

BATTERY AND ACCESSORIES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

06/03 /02 print no.1313 804 90 01 28.10.2009

06

Page 253: H25CT Manual+Linde
Page 254: H25CT Manual+Linde

MAIN HARNESS LPG VERSION PART 1

13138030604.tif

06/04 /00 print no.1313 804 90 01 28.10.2009

06

Page 255: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 05 07 main harness 1

10 7 9125 11 115 receptacle faston DIN 46247 a.req.

11 000 975 15 25 receptacle faston DIN 46247 6,3-2,5-MS a.req.

12 7 9125 30 040 cable shoe 1

13 000 975 02 15 plug connection 4 polig 3

14 7 9125 03 413 housing tab 1

15 7 9125 03 314 interlocking 1

16 7 9125 03 133 contact JPT-0,5-1,0 a.req.

17 7 9125 03 134 contact JPT-1,5-2,5 a.req.

18 7 9125 03 923 base 5

19 7 9125 03 035 contact a.req.

20 7 9125 03 036 contact a.req.

21 7 9125 03 920 base 2

22 7 9125 03 042 contact a.req.

23 7 9125 03 041 contact a.req.

24 7 9160 90 701 housing 5

25 7 9125 03 039 contact 2,5-4mm2 a.req.

26 7 9125 03 038 contact DFK3-4-6 a.req.

27 000 975 18 07 housing 1

28 7 9125 03 072 contact 0,5-1,0 a.req.

29 7 9149 99 017 seal 0,35-1,0 a.req.

30 000 975 18 08 housing 1

31 7 9125 12 005 tab a.req.

32 000 975 02 10 connector plug 3

33 7 9125 33 086 bushing housing 1

34 7 9125 33 090 lid 1

35 7 9125 03 342 lock 1

MAIN HARNESS LPG VERSION PART 1

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/04 /01

06

Page 256: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

36 7 9125 33 502 bush 0,35-0,75 a.req.

37 7 9125 33 503 bush 1,0-2,0 a.req.

38 7 9149 96 015 plug a.req.

39 ---------- 4 housing 1

40 7 9125 33 706 lid 1

41 7 9125 03 320 lock 1

42 7 9125 03 080 contact 0,35-0,5mm2 a.req.

43 7 9125 03 081 contact 0,5-0,75mm2 a.req.

44 7 9149 96 000 plug a.req.

45 002 978 05 11 contact JPT-0,5-1 a.req.

46 7 9149 99 019 seal 0,35-1 a.req.

47 7 9149 99 025 stopper a.req.

48 ---------- 4 housing 1

49 7 9125 33 702 lid 1

50 7 9125 03 322 lock 1

51 7 9125 03 140 contact a.req.

52 7 9149 99 020 seal AD-1,0-2,5 a.req.

53 7 9150 06 016 plug 1

54 000 905 90 00 nut 1

55 000 975 50 09 cover 1

56 7 9125 03 112 contact a.req.

57 000 955 30 68 cable tie 4.6x205 a.req.

MAIN HARNESS LPG VERSION PART 1

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

06/04 /02 print no.1313 804 90 01 28.10.2009

06

Page 257: H25CT Manual+Linde
Page 258: H25CT Manual+Linde

MAIN HARNESS LPG VERSION PART 2

13138030605.tif

06/05 /00 print no.1313 804 90 01 28.10.2009

06

Page 259: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 05 07 main harness 1

10 7 9125 03 145 housing 3P 2

11 002 978 05 11 contact JPT-0,5-1 a.req.

12 7 9149 99 019 seal 0,35-1 a.req.

13 7 9149 99 025 stopper a.req.

14 7 9125 03 420 housing tab 1

15 7 9125 03 123 plug housing 6P 2

16 000 975 18 09 housing 1

17 7 9125 03 072 contact 0,5-1,0 a.req.

18 7 9149 99 017 seal 0,35-1,0 a.req.

19 7 9149 99 901 seal a.req.

20 000 975 18 14 housing 2

21 7 9125 03 057 contact a.req.

22 7 9149 99 033 seal 1,2-2,1 a.req.

23 7 9125 03 073 contact a.req.

24 7 9125 33 323 seal a.req.

25 7 9125 03 146 housing 2 way 2

26 7 9125 03 423 housing tab 1

27 7 9125 15 535 housing 1

28 7 9125 03 020 contact a.req.

29 7 9190 95 056 seal a.req.

30 7 9149 99 904 plug a.req.

31 7 9125 03 802 housing tab 1-way 1

32 000 975 18 10 housing 1

33 000 975 02 07 connector plug 1

34 7 9150 06 061 plug 1

35 7 9125 03 095 contact BDK a.req.

MAIN HARNESS LPG VERSION PART 2

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/05 /01

06

Page 260: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

36 7 9149 99 994 seal BDK a.req.

37 7 9125 33 013 bushing housing 1

38 7 9125 33 231 contact a.req.

39 7 9125 33 211 contact a.req.

40 7 9125 33 330 seal a.req.

41 7 9125 06 071 cable shoe DIN 46234 8-35 1

42 7 9190 95 045 supplies support 1

43 7 9190 95 046 supplies cover 1

44 000 941 91 15 puller 1

45 7 9125 15 005 connector 6-10 2

46 7 9125 06 051 cable shoe DIN 46234 6-16 1

47 7 9160 40 010 type fuse-link 30A-grün 1

48 7 9160 40 017 type fuse-link 70A-beige 1

49 7 9125 06 053 cable shoe DIN 46234 10-16 1

50 7 9125 03 819 socket 2 way 1

51 7 9125 03 720 receptacle faston 0,5-1 a.req.

52 7 9149 99 021 seal 1,8-2,4 a.req.

53 7 9125 03 140 contact a.req.

54 7 9149 99 020 seal AD-1,0-2,5 a.req.

55 000 975 26 04 support 1

56 7 9133 02 401 hose (cable protection) a.req.

57 000 955 26 04 clip fastening assy. 1

58 000 950 22 18 clip assy. 2

59 000 950 22 35 clip fastening assy. 1

60 000 955 30 68 cable tie 4.6x205 a.req.

61 ---------- 4 hose (cable protection) a.req.

MAIN HARNESS LPG VERSION PART 2

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

06/05 /02 print no.1313 804 90 01 28.10.2009

06

Page 261: H25CT Manual+Linde
Page 262: H25CT Manual+Linde

MAIN HARNESS LPG VERSION PART 3

13138030606.tif

06/06 /00 print no.1313 804 90 01 28.10.2009

06

Page 263: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 05 07 main harness 1

10 000 975 18 13 housing 1

11 7 9125 03 072 contact 0,5-1,0 a.req.

12 7 9149 99 017 seal 0,35-1,0 a.req.

13 000 975 18 05 housing 2

14 7 9125 03 146 housing 2 way 5

15 002 978 05 11 contact JPT-0,5-1 a.req.

16 7 9149 99 019 seal 0,35-1 a.req.

17 000 975 18 04 housing 1

18 7 9125 03 145 housing 3P 3

19 7 9125 03 815 housing tab 1

20 7 9125 03 835 housing 4 way 1

21 7 9150 91 930 plug 1 without tilt angle sensor

22 7 9125 33 137 housing 1

23 7 9125 33 239 contact 1

24 7 9125 33 339 seal 1

25 7 9149 99 024 plug a.req.

26 7 9106 00 056 insulation sleeve E6,3-4,8 2

27 7 9125 11 115 receptacle faston DIN 46247 a.req.

28 000 975 15 25 receptacle faston DIN 46247 6,3-2,5-MS a.req.

29 7 9125 03 124 plug housing 10P 1

30 7 9125 03 140 contact a.req.

31 7 9149 99 020 seal AD-1,0-2,5 a.req.

32 7 9149 99 025 stopper a.req.

33 7 9125 03 125 tab housing 10P 1

34 7 9149 99 014 seal 10P 1

35 7 9125 03 753 tab 0,5-1,0 a.req.

MAIN HARNESS LPG VERSION PART 3

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/06 /01

06

Page 264: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

36 7 9125 03 752 contact 1,0-2,5 a.req.

37 7 9149 99 901 seal a.req.

38 7 9125 03 121 plug housing 2 way 2

39 000 975 17 62 housing 1

40 7 9125 11 315 connecting bush DIN 46340 a.req.

41 7 9125 03 621 receptacle faston a.req.

42 000 975 17 64 housing 2

43 7 9125 03 123 plug housing 6P 1

44 7 9125 03 850 plug disconnect 1

45 7 9125 03 101 pin contact 2.1X20.1 a.req.

46 7 9125 01 120 housing socket 1

47 7 9125 01 121 housing socket 1

48 7 9125 11 369 receptacle faston DIN 46340 B6,3-6 Ms a.req.

49 7 9125 03 689 receptacle faston 9,5-4,0-Ms a.req.

50 7 9125 11 366 faston DIN 46340 a.req.

51 000 950 22 11 clip assy. 1

52 000 950 22 04 clip assy. 2

53 000 950 22 33 clip fastening assy. 2

54 000 955 30 68 cable tie 4.6x205 1 without tilt angle sensor

MAIN HARNESS LPG VERSION PART 3

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

06/06 /02 print no.1313 804 90 01 28.10.2009

06

Page 265: H25CT Manual+Linde
Page 266: H25CT Manual+Linde

VARIOUS CABLE LOOMS

13138030607.tif

06/07 /00 print no.1313 804 90 01 28.10.2009

06

Page 267: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 03 11 harness for grounding 1 earth connection

2 1313 381 03 13 harness 1 armrest assembly Coding Plug

3 1313 381 03 14 harness charging cable 1 alternator - battery

4 1313 381 03 15 harness dual pedal 1 pedal Coding Plug double pedal

5 1313 381 03 16 harness single pedal 1 pedal Coding Plug single pedal

6 392 381 03 35 harness code plug twin pedal control 1 pedal Coding Plug armrest assembly

7 7 9150 91 930 plug 1 dummy plug speed sensor

10 7 9125 00 257 cable shoe DIN 46225 1

11 7 9125 00 250 cable shoe DIN 46225 1

12 7 9125 03 186 contact 1-2,5 1

13 7 9125 03 856 electrical housing. 3 way 1

14 7 9125 03 753 tab 0,5-1,0 a.req.

15 7 9149 99 019 seal 0,35-1 a.req.

16 7 9149 99 025 stopper a.req.

17 7 9125 02 128 cable shoe CNF16-8 1

18 000 973 90 05 cap 1

19 7 9125 06 053 cable shoe DIN 46234 10-16 1

20 000 950 22 11 clip assy. 1

21 7 9125 33 113 housing 10 pol. 2

22 7 9125 12 005 tab a.req.

23 7 9149 99 017 seal 0,35-1,0 a.req.

24 7 9149 99 024 plug a.req.

25 7 9125 03 835 housing 4 way 3

26 7 9125 03 462 housing tab 1

27 7 9149 99 023 seal 6P 1

VARIOUS CABLE LOOMS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/07 /01

06

Page 268: H25CT Manual+Linde
Page 269: H25CT Manual+Linde
Page 270: H25CT Manual+Linde

TRUCK LIGHTING, FLASH LIGHT AND DANGER SIGNAL

13138030608.tif

06/08 /00 print no.1313 804 90 01 28.10.2009

06

Page 271: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 974 04 43 working lamp 4

1A 7 9149 90 749 cable grommet 4

2 7 9195 64 945 bulb DIN 72601 YC-12V55W 4

3 346 360 66 00 bracket assy. light 2

4 346 360 66 00 bracket assy. light 2

5 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 8

6 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 14

7 346 363 18 01 cover sheet 1

7 346 363 18 02 cover sheet 1

8 000 974 02 33 rear light 12V 2

9 9 186 353 069 self tapping screw 4

11 1313 363 12 08 support 2

12 9 045 316 183 socket-head screw ISO 4762 M8x25-8.8-A2C 4

13 346 363 01 00 bracket 1

14 7 9190 52 604 warning flashing light 12-80V 1

15 9 045 316 098 socket-head screw ISO 4762 M5x16-8.8-A2C 4

16 9 309 412 012 washer DIN 7349 DIN 7349-5,3-ST-A2A 4

17 7 9189 15 246 buzzer 1

20 000 964 03 44 grommet cable 4

24 000 964 03 43 grommet 2

25 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 4

TRUCK LIGHTING, FLASH LIGHT AND DANGER SIGNAL

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/08 /01

06

Page 272: H25CT Manual+Linde
Page 273: H25CT Manual+Linde
Page 274: H25CT Manual+Linde

WIRE HARNESS FOR LIGHTING

13138030612.tif

06/09 /00 print no.1313 804 90 01 28.10.2009

06

Page 275: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 03 03 harness 1 pos. 3 + 4

2 346 381 03 00 harness 1 pos. 7 + 8

3 392 381 03 81 harness 1 dummy plug for vehicle without Pos. 2

10 7 9125 03 811 tab housing 2-way 1

11 7 9125 03 753 tab 0,5-1,0 a.req.

12 7 9149 99 019 seal 0,35-1 a.req.

13 7 9149 99 016 seal 2 pol 1

14 7 9149 90 749 cable grommet 2

15 000 964 03 43 grommet 1

16 7 9125 03 893 housing socket 2 way 2

17 7 9125 11 365 receptable faston DIN 46340 B6.3-1MS-46340 a.req.

18 7 9125 03 149 housing 6 way 2

19 7 9125 03 752 contact 1,0-2,5 a.req.

20 7 9149 99 020 seal AD-1,0-2,5 a.req.

21 7 9149 99 023 seal 6P 2

22 7 9125 15 556 housing 6-way 2

23 7 9125 03 350 ***** 2

24 7 9125 03 050 contact 0,5-1,0 terminal a.req.

25 7 9125 33 387 sealing wire a.req.

26 7 9125 03 230 plug, hole a.req.

27 7 9125 03 145 housing 3P 1

28 002 978 05 11 contact JPT-0,5-1 a.req.

29 7 9149 99 025 stopper a.req.

30 7 9125 03 146 housing 2 way 1

31 7 9125 11 366 faston DIN 46340 a.req.

32 000 964 03 44 grommet cable 1

33 7 9149 50 940 cable tie 10x115 2 for pos. 2.

WIRE HARNESS FOR LIGHTING

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/09 /01

06

Page 276: H25CT Manual+Linde
Page 277: H25CT Manual+Linde
Page 278: H25CT Manual+Linde

HARNESS - CONTROL VALVE

13138030609.tif

06/10 /00 print no.1313 804 90 01 28.10.2009

06

Page 279: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 03 12 harness control block 1

5 7 9125 03 442 housing tab 14 pol. 1

6 7 9125 12 005 tab a.req.

7 7 9149 99 017 seal 0,35-1,0 a.req.

8 7 9125 03 146 housing 2 way 8

9 002 978 05 11 contact JPT-0,5-1 a.req.

10 7 9149 99 019 seal 0,35-1 a.req.

11 7 9125 03 817 housing tab 2 way 2

12 7 9149 99 025 stopper a.req.

13 7 9125 03 815 housing tab 1

14 000 950 22 32 clip fastening assy. 1

HARNESS - CONTROL VALVE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/10 /01

06

Page 280: H25CT Manual+Linde
Page 281: H25CT Manual+Linde
Page 282: H25CT Manual+Linde

HARNESS LPG MONITORING

13138030610.tif

06/11 /00 print no.1313 804 90 01 28.10.2009

06

Page 283: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 03 06 harness 1 ultra sound sensor

2 1313 381 03 07 harness 1 switch pressure

10 7 9125 03 453 housing tab 2

11 7 9125 12 005 tab a.req.

12 7 9149 99 017 seal 0,35-1,0 a.req.

13 7 9149 99 024 plug a.req.

14 7 9125 03 816 mounting housed 1 way 1-way 1

15 7 9125 03 151 bush 1

16 000 975 17 38 housing plug 1-way 1

17 7 9125 03 101 pin contact 2.1X20.1 1

18 7 9125 03 147 plug housing 4 way 1

19 002 978 05 11 contact JPT-0,5-1 a.req.

20 7 9149 99 019 seal 0,35-1 a.req.

21 7 9106 00 056 insulation sleeve E6,3-4,8 2

22 7 9125 11 115 receptacle faston DIN 46247 2

HARNESS LPG MONITORING

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/11 /01

06

Page 284: H25CT Manual+Linde
Page 285: H25CT Manual+Linde
Page 286: H25CT Manual+Linde

CABLE TREES LEVEL INDICATOR

13138030611.tif

06/12 /00 print no.1313 804 90 01 28.10.2009

06

Page 287: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 381 03 09 harness EPS 1

5 7 9125 03 404 housing tab 1

6 7 9125 03 314 interlocking 1

7 7 9125 03 005 contact a.req.

8 000 975 18 08 housing 1

9 7 9125 12 005 tab a.req.

10 7 9149 99 017 seal 0,35-1,0 a.req.

11 000 975 18 07 housing 1

12 7 9125 03 072 contact 0,5-1,0 a.req.

13 7 9125 03 923 base 1

14 7 9125 03 035 contact a.req.

15 000 975 18 16 housing 1

16 7 9149 99 901 seal a.req.

17 7 9149 99 024 plug a.req.

18 7 9125 03 423 housing tab 1

19 7 9125 03 057 contact a.req.

20 7 9149 99 033 seal 1,2-2,1 a.req.

21 7 9149 99 904 plug a.req.

22 7 9125 33 136 housing 3-pol. 1

23 000 950 22 18 clip assy. 3

24 000 950 22 33 clip fastening assy. 3

CABLE TREES LEVEL INDICATOR

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 06/12 /01

06

Page 288: H25CT Manual+Linde
Page 289: H25CT Manual+Linde

Register 07 : HYDRAULIC UNIT07/01 00 - 02 CONTROL VALVE AND LINES07/02 00 - 01 control block VW10-M3 (BR 1313)07/03 00 - 01 control block VW10-M4 (BR 1313)07/04 00 - 02 OIL TANK WITH LINES AND ACCESSORIES07/05 00 - 02 OIL FILTER AND LINES FOR HYDRAULIC TRAVEL SYSTEM07/06 00 - 02 TILT CYLINDER07/07 00 - 01 ADDITIONAL HYDRAULICS HOSE LINES IN THE VEHICLE07/08 00 - 02 AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 150907/09 00 - 03 AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST MAST SERIES 150907/10 00 - 04 AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 150907/11 00 - 02 AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 151007/12 00 - 03 AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST SERIES 151007/13 00 - 04 AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 151007/14 00 - 03 AUXILIARY HYDRAULIC SERVICES FOR QUADRUPLE MAST SERIES 45DV MQ AND 55DV MQ

H25/27/30/32

28.10.2009 print no.1313 804 90 01

07

Page 290: H25CT Manual+Linde
Page 291: H25CT Manual+Linde
Page 292: H25CT Manual+Linde

CONTROL VALVE AND LINES

13138030701.tif

07/01 /00 print no.1313 804 90 01 28.10.2009

07

Page 293: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 441 58 00 support 1

2 000 965 41 66 spring element 3

3 000 918 76 74 retainer plate 1

4 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 1

5 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

6 9 124 311 298 stud threaded DIN 939 M12X30-939-8.8 1

7 9 310 003 022 washer/shim/disc DIN 7989 1

8 9 291 429 022 washer ISO 7090 B13-HV300 1

9 9 210 281 140 hexagon nut ISO 4032 DIN 934-M12-8A2C 1

10 9 380 620 419 spring dowel sleeve ISO 8752 10x45-ST 1

11 9 124 311 180 stud DIN 939 M8x20-8.8-A2C 2

12 9 265 316 110 nut hexagon DIN 6923 M8-8-A2C 2

13 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

14 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 1

15 1313 441 32 10 hose line 1

16 9 721 010 018 pipe union ISO 8434-1 SDS-L18xM22x1,5-type E-A3C-V 1

17 000 955 08 41 rubber clamp 1

18 1313 441 32 08 hose line valve to tilt cyl 1

19 9 721 002 062 pipe union ISO 8434-1 SDS-S12xM18x1,5-type E-A3C-V 1

20 000 950 22 38 clip fastening assy. A3+A4/16-20 1

21 1313 441 32 15 hose line 1

22 9 721 002 062 pipe union ISO 8434-1 SDS-S12xM18x1,5-type E-A3C-V 1

23 7 9149 90 753 cable grommet 1

24 1313 441 32 07 hose line 1

25 000 955 08 68 clamp hose 1

26 ---------- 5 hose line see illustration 07/07

27 ---------- 5 pipe union ISO 8434-1 SDS-S12xM18x1,5-type E-A3C-V see illustration 07/07

CONTROL VALVE AND LINES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/01 /01

07

Page 294: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

28 ---------- 5 support see illustration 03/01

30 ---------- 5 hose line see illustration 07/07

31 ---------- 5 pipe see illustration 07/05

32 ---------- 5 pipe line see illustration 07/05

33 ---------- 5 flexible formed hose see illustration 07/04

34 9 148 011 176 plug screw WN 14141 M18x1,5-V80-A2C a.req. without auxiliary hydraulic

CONTROL VALVE AND LINES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/01 /02 print no.1313 804 90 01 28.10.2009

07

Page 295: H25CT Manual+Linde
Page 296: H25CT Manual+Linde

control block VW10-M3 (BR 1313)

6808037371.tif

07/02 /00 print no.1313 804 90 01 28.10.2009

07

Page 297: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

680 000 76 11 control block VW10-M3 230bar/12V/1313 1 Z50

680 000 76 10 control block VW10-M3 205bar/12V/1313 1 Z55/Z60/Z65/Z70

685 340 57 04 magnet assy. 1 includes pos. 1-5

1 000 963 21 63 o-ring ISO 3601-1 14x1,8-V80 1

2 000 973 61 24 magnet 1

3 000 973 63 01 coil magnet 12V AMP 1

4 000 963 21 49 o-ring DIN 3770 19x2,5-V80 1

5 000 904 60 63 nut 1

6 000 963 02 38 o ring 6

7 000 963 01 07 o ring 2

8 000 963 00 29 o ring ISO 8434-1 6x1,5-V80 4

9 000 903 75 27 threaded pin M10x1x25 6

10 9 243 281 134 1 seal collar nut WN 14302 M10x1-8 6

11 9 133 339 142 1 pin threaded DIN 913 M6x45-8.8 2

12 9 243 281 090 1 nut WN 14302 3

685 340 57 00 magnet assy. 6 includes pos. 13-17

13 000 963 21 63 o-ring ISO 3601-1 14x1,8-V80 6

14 000 973 61 16 magnet 6

15 000 973 63 00 coil magnet 12V AMP 6

16 000 963 21 49 o-ring DIN 3770 19x2,5-V80 6

17 000 904 60 63 nut 6

18 9 045 316 138 1 socket-head screw ISO 4762 M6x35-8.8-A2C 4

19 9 045 316 142 1 socket-head screw ISO 4762 M6x45-8.8-A2C 4

20 680 343 24 12 screw 1

control block VW10-M3 (BR 1313)

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/02 /01

07

Page 298: H25CT Manual+Linde
Page 299: H25CT Manual+Linde
Page 300: H25CT Manual+Linde

control block VW10-M4 (BR 1313)

6808037370.tif

07/03 /00 print no.1313 804 90 01 28.10.2009

07

Page 301: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

680 000 75 71 control block VW10-M4 230bar/12V/1313 1 Z50

680 000 75 70 control block VW10-M4 205bar/12V/1313 1 Z55/Z60/Z65/Z70

685 340 57 04 magnet assy. 1 includes pos. 1-5

1 000 963 21 63 o-ring ISO 3601-1 14x1,8-V80 1

2 000 973 61 24 magnet 1

3 000 973 63 01 coil magnet 12V AMP 1

4 000 963 21 49 o-ring DIN 3770 19x2,5-V80 1

5 000 904 60 63 nut 1

6 000 963 02 38 o ring 8

7 000 963 01 07 o ring 2

8 000 963 00 29 o ring ISO 8434-1 6x1,5-V80 4

9 000 903 75 27 threaded pin M10x1x25 8

10 9 243 281 134 1 seal collar nut WN 14302 M10x1-8 8

11 9 133 339 142 1 pin threaded DIN 913 M6x45-8.8 2

12 9 243 281 090 1 nut WN 14302 3

685 340 57 00 magnet assy. 8 includes pos. 13-17

13 000 963 21 63 o-ring ISO 3601-1 14x1,8-V80 8

14 000 973 61 16 magnet 8

15 000 973 63 00 coil magnet 12V AMP 8

16 000 963 21 49 o-ring DIN 3770 19x2,5-V80 8

17 000 904 60 63 nut 8

18 9 045 316 138 1 socket-head screw ISO 4762 M6x35-8.8-A2C 4

19 9 045 316 142 1 socket-head screw ISO 4762 M6x45-8.8-A2C 4

20 680 343 24 12 screw 1

control block VW10-M4 (BR 1313)

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/03 /01

07

Page 302: H25CT Manual+Linde
Page 303: H25CT Manual+Linde
Page 304: H25CT Manual+Linde

OIL TANK WITH LINES AND ACCESSORIES

13138030703.tif

07/04 /00 print no.1313 804 90 01 28.10.2009

07

Page 305: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 420 60 03 oil tank assy. 1

2 000 942 27 38 dipstick 1

3 000 983 85 08 filter housing 1

4 000 963 11 16 o-ring ISO 3601-1 164,47x5,33-V80 1

5 9 311 600 020 washer plain DIN 6340 10,5 4

6 9 265 316 130 nut EN 1661 M10-8-A2C 4

7 000 983 21 14 filter 1

8 000 965 26 27 bumper rubber 1

9 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 1

10 000 902 53 54 threaded rod M10/M10x90-SW-19 1

11 9 292 425 020 washer 10-200HV-A2C 1

12 9 008 311 236 hexagon head screw ISO 4017 M10x20-8.8-A2C 1

13 000 983 16 78 filter insert 1

14 1313 441 08 03 flexible formed hose 1

15 000 955 20 60 clip hose DIN 3017 A32-50x13-W2 1

16 000 951 20 79 connection piece 1

18 000 955 20 31 clip hose DIN 3017 A25-40x13-W2 1

19 000 955 20 09 clip hose DIN 3017 A16-27x9-W2 1

20 000 951 20 35 piece connection 1

21 000 963 21 21 o ring 1

22 000 955 20 09 clip hose DIN 3017 A16-27x9-W2 1

23 000 961 22 06 pipe union 1

24 000 955 20 54 clip DIN 3017 A12-20x9-W2 1

25 000 955 20 36 clip hose DIN 3017 A20-32x13-W2 3

26 1313 441 08 00 hose flexible formed 1

27 1313 441 08 01 hose flexible formed 1

28 000 951 19 26 piece connection M14x1,5x47 1

OIL TANK WITH LINES AND ACCESSORIES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/04 /01

07

Page 306: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

29 000 955 20 54 clip DIN 3017 A12-20x9-W2 1

30 000 955 20 09 clip hose DIN 3017 A16-27x9-W2 1

31 000 955 30 76 tie cable 1

32 000 903 11 40 hollow screw 1

33 000 962 04 39 seal 22x32x2-V80 2

34 7 9174 15 511 sensor 1

35 000 962 04 36 seal 12x19x1,5-V80 1

36 1313 441 08 02 flexible formed hose 1

37 000 950 23 08 hose clip assy. 1

38 000 955 20 60 clip hose DIN 3017 A32-50x13-W2 1

39 000 950 22 52 clip fastening assy. 1

40 1313 441 11 00 flange 1

41 000 963 23 44 o ring 1

42 9 294 003 020 washer ISO 7092 10-200HV-A2C 2

43 9 045 311 239 socket-head screw ISO 4762 M10x25-8.8-A2C 2

44 000 963 10 74 O-ring ISO 3601-1 103x5,3-P50 1

45 000 983 97 07 lid 1

46 000 952 40 26 screw plug M14x1,5 1

47 000 964 10 29 strip rubber 6

48 000 963 21 24 o-ring 15,3x2,4-V80 1

OIL TANK WITH LINES AND ACCESSORIES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/04 /02 print no.1313 804 90 01 28.10.2009

07

Page 307: H25CT Manual+Linde
Page 308: H25CT Manual+Linde

OIL FILTER AND LINES FOR HYDRAULIC TRAVEL SYSTEM

13138030704.tif

07/05 /00 print no.1313 804 90 01 28.10.2009

07

Page 309: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 983 08 76 filter 1

000 983 16 84 filter insert 1 to pos. 1

000 960 81 49 set of seals assy. 1 to pos. 1

2 000 916 09 40 bush 9x22x15 3

3 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 6

4 9 008 311 188 hexagon head screw ISO 4017 M8x35-8.8-A2C 3

5 000 983 08 63 filter 1

000 983 16 64 filter insert 1 to pos. 5

000 960 81 33 set of seals assy. 1 to pos. 5

6 000 916 09 41 bushing 9x22x35 3

7 9 008 316 196 hexagon head screw ISO 4017 M8x55-8.8.A2C 3

8 9 721 010 018 pipe union ISO 8434-1 SDS-L18xM22x1,5-type E-A3C-V 2

9 1313 441 40 02 pipe line 1

10 1313 441 32 14 hose line 1

11 9 170 281 130 bolt banjo DIN 7643 15-ST-7643-A3C 1

13 000 950 22 36 clip fastening assy. A1+A4/18-30 1

14 1313 441 32 13 hose line 1

15 9 170 281 160 bolt DIN 7643 18-ST-7643-A3C 1

16 000 962 04 39 seal 22x32x2-V80 2

17 1313 441 32 11 hose line 1

18 000 903 11 40 hollow screw 1

19 000 962 04 39 seal 22x32x2-V80 2

20 9 170 281 130 bolt banjo DIN 7643 15-ST-7643-A3C 1

21 000 962 04 38 seal ring 18x26,5x2-V80 6

22 9 170 281 130 bolt banjo DIN 7643 15-ST-7643-A3C 1

24 000 955 08 69 clamp hose 1

25 000 950 22 62 clip fastening assy. 1

OIL FILTER AND LINES FOR HYDRAULIC TRAVEL SYSTEM

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/05 /01

07

Page 310: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

26 1313 441 40 01 pipe 1

27 9 170 281 060 bolt banjo DIN 7643 8-7643ST-A3C 1

28 000 962 04 36 seal 12x19x1,5-V80 2

29 9 170 281 080 banjo union DIN 7643 1

30 000 962 04 37 seal ring 14x22x1,5-V80 2

31 1313 441 32 09 hose line 1

32 9 721 010 018 pipe union ISO 8434-1 SDS-L18xM22x1,5-type E-A3C-V 2

34 1313 441 32 12 hose line 1

35 9 170 281 130 bolt banjo DIN 7643 15-ST-7643-A3C 1

36 000 962 04 38 seal ring 18x26,5x2-V80 2

37 9 294 003 018 washer ISO 7092 8,4-ST50-A2C 1

38 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

39 1313 441 40 00 pipe brake left and right 1

40 000 903 11 16 screw 1

41 000 962 04 38 seal ring 18x26,5x2-V80 2

42 000 903 68 90 threaded pin 1

43 9 243 281 140 locknut WN 14302 M12-8.8 1

44 9 607 021 060 lubrication nipple DIN 71412 AM6 1

45 000 962 04 36 seal 12x19x1,5-V80 1

46 000 905 01 22 dome nut M12/6kt-19 1

47 9 170 281 080 banjo union DIN 7643 2

48 000 962 04 37 seal ring 14x22x1,5-V80 4

49 ---------- 5 pipe union ISO 8434-1 SDS-L15xM18x1,5-type E-CFS-V 1 see illustration 01/03

50 000 950 22 33 clip fastening assy. 1 for pos. 17 / harness main

OIL FILTER AND LINES FOR HYDRAULIC TRAVEL SYSTEM

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/05 /02 print no.1313 804 90 01 28.10.2009

07

Page 311: H25CT Manual+Linde
Page 312: H25CT Manual+Linde

TILT CYLINDER

13138030706.tif

07/06 /00 print no.1313 804 90 01 28.10.2009

07

Page 313: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 5170 490 80 00 ***** 2 simple mast

5170 490 80 01 ***** 2 duplex / triplex mast

5170 490 80 02 ***** 2 Quadruple mast

5170 490 80 03 ***** 2 bottlers tilt

2 000 900 15 27 eye bolt assy. includes 3,4 and 6

3 ---------- 4

4 9 512 092 305 spherical bearing ISO 12240-1 E30-2RS

6 9 045 346 295 socket-head screw ISO 4762 M12x25-10.9-DAC 1

7 000 907 02 49 ring J47x1,7V 2

8 000 962 26 19 wiper ring WN 17217 A37x47x5/7 2

9 000 962 19 46 grooved ring WN 17217 17217-c37x47x8 2

10 331 446 09 00 bush 2

11 000 907 01 32 snap ring 70,2x4 2

12 ---------- 4 piston rod 2 loctite 270

300 446 11 11 piston 2

13 000 962 36 20 seal 70-57-6 2

14 000 962 33 13 guide ring 66x70x10 2

15 9 210 341 218 nut ISO 8673 DIN 934-M24X2-10 2 loctite 270 , 6° F / 8° Band 10° F / 5° B only

16 ---------- 4 cylinder pipe 2

17 9 721 000 009 pipe union GE8LM-Z3901-A3C 4

18 000 963 06 25 o-ring 65x3-NBR90 2

19 000 962 02 54 pipe plug 4

20 000 912 22 12 pin 2

21 000 912 22 18 bolt 2

000 912 21 19 pin 12X74X8X64 2 Quadruple mast only

22 9 387 620 385 spring cotter ISO 8748 ISO 8748-8x70-ST 4

TILT CYLINDER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/06 /01

07

Page 314: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

23 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2 Quadruple mast only

24 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2 chassis side only

TILT CYLINDER

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/06 /02 print no.1313 804 90 01 28.10.2009

07

Page 315: H25CT Manual+Linde
Page 316: H25CT Manual+Linde

ADDITIONAL HYDRAULICS HOSE LINES IN THE VEHICLE

13138030707.tif

07/07 /00 print no.1313 804 90 01 28.10.2009

07

Page 317: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 441 32 04 hose line 2

2 9 721 002 062 pipe union ISO 8434-1 SDS-S12xM18x1,5-type E-A3C-V 4

3 000 955 08 44 clamp hose 6

4 7 9149 90 753 cable grommet 4

5 1313 441 32 05 hose line 2

6 9 148 011 176 plug screw WN 14141 M18x1,5-V80-A2C 2/4 only in connection with auxiliary hydraulic/

7 7 9149 90 752 cable grommet 1 only in connection without auxiliaryhydrauli

8 000 955 08 15 clamp hose 1

ADDITIONAL HYDRAULICS HOSE LINES IN THE VEHICLE

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/07 /01

07

Page 318: H25CT Manual+Linde
Page 319: H25CT Manual+Linde
Page 320: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 1509

13138030708.tif

07/08 /00 print no.1313 804 90 01 28.10.2009

07

Page 321: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

NOTE: HH = lift height (mm)Quantities indicated in front of the strokeapply to single aux. hydr. services.Quantities indicated behind the strokeapplyto double aux. hydr. services.

1 186 446 16 00 guide 2

2 9 045 316 126 socket-head screw ISO 4762 M6x12-8.8-A2C 4

3 1509 490 50 00 double hose assy. 3065mm 1/2 2850 HH

1509 490 50 01 double hose assy. 3265mm 1/2 3050 HH

1509 490 50 02 double hose assy. 3365mm 1/2 3150 HH

1509 490 50 03 double hose assy. 3565mm 1/2 3350 HH

1509 490 50 04 double hose assy. 3665mm 1/2 3450 HH

1509 490 50 05 double hose assy. 3765mm 1/2 3550 HH

1509 490 50 06 double hose assy. 3965mm 1/2 3750 HH

1509 490 50 07 double hose assy. 4265mm 1/2 4050 HH

1509 490 50 08 double hose assy. 4765mm 1/2 4550 HH

1509 490 50 09 double hose assy. 5465mm 1/2 5250 HH

4 000 955 36 06 clip clamping 17x18-GD-Zn 1/2

5 9 292 003 014 1 washer ISO 7089 A6,4-ST50-A2C 2/4

6 9 045 311 135 1 socket-head screw ISO 4762 M6x25-8.8-A2C 2/4

7 000 955 21 79 hose clip a.req.

8 9 292 003 018 1 washer ISO 7089 A8,4-ST50-A2C a.req.

9 9 045 316 183 1 socket-head screw ISO 4762 M8x25-8.8-A2C a.req.

10 000 964 19 62 edge protection A2-36X15 a.req.

11 186 446 25 08 support,right 1

12 186 446 25 09 support,left 1

13 186 446 26 03 bracket 1/2

AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/08 /01

07

Page 322: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

14 186 441 06 01 clamping piece 1/2

15 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

16 9 008 311 180 1 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

17 9 292 003 018 1 washer ISO 7089 A8,4-ST50-A2C a.req.

18 9 008 311 180 1 hexagon head screw ISO 4017 M8x20-8.8-A2C a.req.

19 9 273 209 186 nut hex thin DIN 80705 M20X1.5-14H a.req.

20 000 951 21 10 pipe union 2/4

21 000 951 24 86 pipe union 12S-G3/8 2/4

22 000 951 39 05 locking cap 9/16-18UNF 2/4

23 000 918 71 22 retainer plate a.req.

AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/08 /02 print no.1313 804 90 01 28.10.2009

07

Page 323: H25CT Manual+Linde
Page 324: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST MAST SERIES 1509

13138030713.tif

07/09 /00 print no.1313 804 90 01 28.10.2009

07

Page 325: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

S = standardD = duplexT = triplexHH = lift height (mm)

NOTE: HH = lift height (mm)Quantities indicated in front of the strokeapply to single aux. hydr. services.Quantities indicated behind the strokeapplyto double aux. hydr. services.

1 1510 490 50 26 double hose assy. 2355mm 2 2880 HH

1510 490 50 27 double hose assy. 2305mm 2 3070 HH , 3170 HH

1510 490 50 29 double hose assy. 2425mm 2 3370 HH

1510 490 50 31 double hose assy. 2575mm 2 3570 HH

1510 490 50 32 double hose assy. 2725mm 2 3770 HH

1510 490 50 33 double hose assy. 2875mm 2 3970 HH

2 1509 490 50 28 double hose assy. 1946mm 2 2880 HH

1509 490 50 29 double hose assy. 1995mm 2 3070 HH

1509 490 50 30 double hose assy. 2045mm 2 3170 HH

1509 490 50 31 double hose assy. 2094mm 2 3370 HH

1509 490 50 32 double hose assy. 2143mm 2 3570 HH

1509 490 50 33 double hose assy. 2193mm 2 3770 HH

1509 490 50 34 double hose assy. 2242mm 2 3970 HH

3 186 441 48 00 angle 1/2 3070 HH , 3170 HH

186 441 48 01 angle 1/2 2880 HH , 3370 HH

186 441 48 02 angle 1/2 3570 HH , 3770 HH

186 441 48 03 angle 1/2 3970 HH

4 186 440 77 00 support assy. 1/2

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/09 /01

07

Page 326: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

5 186 440 77 02 support assy. 2/4

5a 186 441 58 15 ***** 1/2 3570 HH , 3770 HH and 3970 HH only

6 000 955 36 06 clip clamping 17x18-GD-Zn a.req.

7 9 045 311 135 socket-head screw ISO 4762 M6x25-8.8-A2C a.req.

8 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C a.req.

9 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C a.req.

10 9 291 003 020 washer ISO 7090 B10,5x20x2-HV200-A2C a.req.

11 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C a.req.

12 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2/4

13 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2/4

14 9 090 356 178 screw raised head ISO 7380 M8x16-10.9-DAC-sw 2/4

15 186 440 45 10 guide assy. 1/2 2880 HH

186 440 45 11 guide assy. 1/2 3070 HH , 3170 HH

186 440 45 12 guide assy. 1/2 3370 HH

186 440 45 13 guide assy. 1/2 3570 HH

186 440 45 14 guide assy. 1/2 3770 HH

186 440 45 15 guide assy. 1/2 3970 HH

16 000 955 20 70 clip hose DIN 3017 A80-100x13-W2 2

17 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 4

18 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 8

19 9 210 281 110 nut ISO 4032 934-M8-8A2C 4

20 000 955 03 15 clip 2

21 183 440 25 02 plate guard assy. 1 single reeving

183 440 25 00 cap assy. 1 3rd and 4th reeving

22 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

23 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

24 180 441 58 00 support 1

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/09 /02 print no.1313 804 90 01 28.10.2009

07

Page 327: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

25 180 441 58 01 support 1

26 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

27 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

28 000 918 53 45 fishplate 1/2 not present on right side if sideshifteris installed

29 000 955 06 02 clip 1/2 not present on right side if sideshifteris installed

30 9 008 311 193 hexagon head screw ISO 4017 M8x45-8.8-A2C 1/2 not present on right side if sideshifteris installed

31 185 446 25 08 support 1

32 000 951 72 10 adapter M16x1,5/9-16-18UNF 2/4 not present on right side if sideshifteris installed

33 000 951 39 05 locking cap 9/16-18UNF 2/4 not present on right side if sideshifteris installed

34 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 2

35 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

36 9 045 311 177 socket-head screw ISO 4762 M8x16-8.8-A2C /2

37 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C /2

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/09 /03

07

Page 328: H25CT Manual+Linde
Page 329: H25CT Manual+Linde
Page 330: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1509

13138030710.tif

07/10 /00 print no.1313 804 90 01 28.10.2009

07

Page 331: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

S = standardD = duplexT = triplexHH = lift height (mm)

NOTE: HH = lift height (mm)Quantities indicated in front of the strokeapply to single aux. hydr. services.Quantities indicated behind the strokeapplyto double aux. hydr. services.

1 1509 490 50 10 double hose assy. 5290mm 1 4th function , 4285 HH

1509 490 50 11 double hose assy. 5635mm 1 4th function , 4565 HH

1509 490 50 12 double hose assy. 5835mm 1 4th function , 4715 HH

1509 490 50 13 double hose assy. 5885mm 1 4th function , 4865 HH

1509 490 50 14 double hose assy. 6085mm 1 4th function , 5015 HH

1509 490 50 15 double hose assy. 6135mm 1 4th function , 5165 HH

1509 490 50 16 double hose assy. 6545mm 1 4th function , 5515 HH

1509 490 50 17 double hose assy. 6770mm 1 4th function , 5815 HH

1509 490 50 18 double hose assy. 6820mm 1 4th function , 5965 HH

2 1509 490 50 19 double hose assy. 5145mm 1 3rd function , 4285 HH

1509 490 50 20 double hose assy. 5395mm 1 3rd function , 4565 HH

1509 490 50 21 double hose assy. 5595mm 1 3rd function , 4715 HH

1509 490 50 22 double hose assy. 5645mm 1 3rd function , 4865 HH

1509 490 50 23 double hose assy. 5845mm 1 3rd function , 5015 HH

1509 490 50 24 double hose assy. 5895mm 1 3rd function , 5165 HH

1509 490 50 25 double hose assy. 6170mm 1 3rd function , 5515 HH

1509 490 50 26 double hose assy. 6420mm 1 3rd function , 5815 HH

1509 490 50 27 double hose assy. 6470mm 1 3rd function , 5965 HH

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/10 /01

07

Page 332: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

3 1509 490 50 28 double hose assy. 1946mm 1/2 4285 HH

1509 490 50 29 double hose assy. 1995mm 1/2 4565 HH

1509 490 50 30 double hose assy. 2045mm 1/2 4715 HH , 4865 HH

1509 490 50 31 double hose assy. 2094mm 1/2 5015 HH , 5165 HH

1509 490 50 33 double hose assy. 2193mm 1/2 5515 HH

1509 490 50 34 double hose assy. 2242mm 1/2 5815 HH , 5965 HH

4 183 441 15 00 bracket 1/2

5 1509 441 09 01 guide 1/2

6 000 955 20 67 clip hose DIN 3017 A70-90x13-W2 2

7 186 441 58 18 support a.req.

8 185 441 58 01 support 2

9 000 955 36 06 clip clamping 17x18-GD-Zn a.req.

10 9 045 311 135 socket-head screw ISO 4762 M6x25-8.8-A2C a.req.

11 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C a.req.

12 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C a.req.

13 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 a.req.

14 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C a.req.

15 9 045 316 142 socket-head screw ISO 4762 M6x45-8.8-A2C 4

16 186 440 45 07 guide assy. 1 4285 HH , 4565 HH , 4715 HH , 4865 HH ,5015 HH , 5165 HH

186 440 45 08 guide assy. 1 5515 HH , 5815 HH , 5965 HH

17 000 955 20 60 clip hose DIN 3017 A32-50x13-W2 4

18 000 955 20 37 cable tie 9X350 BLACK a.req.

19 186 440 45 04 guide assy. 1 4285 HH , 4565 HH

186 440 45 05 guide assy. 1 4865 HH , 5015 HH , 5165 HH , 5515 HH

186 440 45 06 guide assy. 1 5815 HH , 5965 HH

20 186 440 24 10 guide assy. 1 4285 HH

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/10 /02 print no.1313 804 90 01 28.10.2009

07

Page 333: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

186 440 24 11 guide assy. 1 4565 HH

186 440 24 12 guide assy. 1 4715 HH , 4865 HH

186 440 24 13 guide assy. 1 5015 HH , 5165 HH

186 440 24 14 guide assy. 1 5515 HH

186 440 24 15 guide assy. 1 5815 HH , 5965 HH

21 9 045 316 183 socket-head screw ISO 4762 M8x25-8.8-A2C 2

22 183 440 25 00 cap assy. 1 dual reeving

183 440 25 02 plate guard assy. 1 single reeving

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

25 185 446 25 08 support 1

26 000 955 03 15 clip 2

27 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 4

28 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

29 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 8

30 186 440 24 22 guide assy. 1 4285 HH , 4565 HH

186 440 24 23 guide assy. 1 4715 HH

186 440 24 24 guide assy. 1 4865 HH

186 440 24 25 guide assy. 1 5015 HH

186 440 24 26 guide assy. 1 5165 HH

186 440 24 29 guide assy. 1 5515 HH

186 440 24 31 guide assy. 1 5815 HH

186 440 24 32 guide assy. 1 5965 HH

31 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C 2

32 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 2

33 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 2

34 180 441 58 01 support 1

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/10 /03

07

Page 334: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

35 180 441 58 00 support 1

36 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

37 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

38 000 955 06 02 clip 1/2 not present on right side if sideshifteris installed

39 000 918 53 45 fishplate 1/2 not present on right side if sideshifteris installed

40 9 008 311 193 hexagon head screw ISO 4017 M8x45-8.8-A2C 1/2 not present on right side if sideshifteris installed

41 000 951 39 05 locking cap 9/16-18UNF 2/4 not present on right side if sideshifteris installed

42 000 951 72 10 adapter M16x1,5/9-16-18UNF 2/4 not present on right side if sideshifteris installed

43 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 2

44 1509 440 24 00 guide assy. L-335 1 4285 HH

1509 440 24 01 guide assy. L-385 1 4565 HH , 4715 HH

1509 440 24 02 guide assy. L-435 1 4865 HH , 5015 HH

1509 440 24 03 guide assy. L-485 1 5165 HH

1509 440 24 04 guide assy. L-535, L1-267 1 5515 HH

1509 440 24 05 guide assy. L-585, L1-292 1 5815 HH

1509 440 24 06 guide assy. L-635, L1-317 1 5965 HH

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/10 /04 print no.1313 804 90 01 28.10.2009

07

Page 335: H25CT Manual+Linde
Page 336: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 1510

13138030709.tif

07/11 /00 print no.1313 804 90 01 28.10.2009

07

Page 337: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

NOTE: HH = lift height (mm)Quantities indicated in front of the strokeapply to single aux. hydr. services.Quantities indicated behind the strokeapplyto double aux. hydr. services.

1 186 446 16 00 guide 2

2 9 045 316 126 socket-head screw ISO 4762 M6x12-8.8-A2C 4

3 1510 490 50 16 double hose assy. 3315mm 1/2 2850 HH

1510 490 50 17 double hose assy. 3515mm 1/2 3050 HH

1510 490 50 18 double hose assy. 3615mm 1/2 3150 HH

1510 490 50 19 double hose assy. 3815mm 1/2 3350 HH

1510 490 50 20 double hose assy. 3915mm 1/2 3450 HH

1510 490 50 21 double hose assy. 4015mm 1/2 3550 HH

1510 490 50 22 double hose assy. 4215mm 1/2 3750 HH

1510 490 50 23 double hose assy. 4515mm 1/2 4050 HH

1510 490 50 24 double hose assy. 5015mm 1/2 4550 HH

1510 490 50 25 double hose assy. 5715mm 1/2 5250 HH

4 000 955 36 06 clip clamping 17x18-GD-Zn 1/2

5 9 292 003 014 1 washer ISO 7089 A6,4-ST50-A2C 2/4

6 9 045 311 135 1 socket-head screw ISO 4762 M6x25-8.8-A2C 2/4

7 000 955 21 80 hose clip a.req.

8 9 292 003 018 1 washer ISO 7089 A8,4-ST50-A2C a.req.

9 9 045 316 183 1 socket-head screw ISO 4762 M8x25-8.8-A2C a.req.

10 000 964 19 62 edge protection A2-36X15 a.req.

11 186 446 25 08 support,right 1

12 186 446 25 09 support,left 1

13 186 446 26 03 bracket 1/2

AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/11 /01

07

Page 338: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

14 186 441 06 01 clamping piece 1/2

15 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1/2

16 9 008 311 180 1 hexagon head screw ISO 4017 M8x20-8.8-A2C 1/2

17 9 292 003 018 1 washer ISO 7089 A8,4-ST50-A2C 2/4

18 9 008 311 180 1 hexagon head screw ISO 4017 M8x20-8.8-A2C 2/4

19 9 273 209 186 nut hex thin DIN 80705 M20X1.5-14H 2/4

20 000 951 21 10 pipe union 2/4

21 000 951 24 86 pipe union 12S-G3/8 2/4

22 000 951 39 05 locking cap 9/16-18UNF 2/4

23 000 918 71 22 retainer plate a.req.

AUXILIARY HYDRAULIC SERVICES FOR SIMPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/11 /02 print no.1313 804 90 01 28.10.2009

07

Page 339: H25CT Manual+Linde
Page 340: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST SERIES 1510

13138030711.tif

07/12 /00 print no.1313 804 90 01 28.10.2009

07

Page 341: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

S = standardD = duplexT = triplexHH = lift height (mm)

NOTE: HH = lift height (mm)Quantities indicated in front of the strokeapply to single aux. hydr. services.Quantities indicated behind the strokeapplyto double aux. hydr. services.

1 1510 490 50 26 double hose assy. 2355mm 2 2875 HH

1510 490 50 27 double hose assy. 2305mm 2 3065 HH

1510 490 50 28 double hose assy. 2325mm 2 3265 HH

1510 490 50 29 double hose assy. 2425mm 2 3365 HH

1510 490 50 30 double hose assy. 2475mm 2 3465 HH

1510 490 50 32 double hose assy. 2725mm 2 3765 HH

1510 490 50 33 double hose assy. 2875mm 2 3965 HH

2 1510 490 50 40 double hose assy. 1934 mm 2 2875 HH

1510 490 50 41 double hose assy. 1983 mm 2 3065 HH

1510 490 50 42 double hose assy. 2033 mm 2 3265 HH

1510 490 50 43 double hose assy. 2082 mm 2 3365 HH , 3465 HH

1510 490 50 45 double hose assy. 2181 mm 2 3765 HH

1510 490 50 46 double hose assy. 2231 mm 2 3965 HH

3 186 441 48 00 angle 1/2 3065 HH , 3265 HH

186 441 48 01 angle 1/2 2875 HH , 3365 HH , 3465 HH

186 441 48 02 angle 1/2 3765 HH

186 441 48 03 angle 1/2 3965 HH

4 186 440 77 00 support assy. 1/2

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/12 /01

07

Page 342: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

5 186 440 77 02 support assy. 2/4

5a 186 441 58 15 ***** 1/2 3465 HH , 3765 HH , 3965 HH only

6 000 955 36 06 clip clamping 17x18-GD-Zn a.req.

7 9 045 311 135 socket-head screw ISO 4762 M6x25-8.8-A2C a.req.

8 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C a.req.

9 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C a.req.

10 9 291 003 020 washer ISO 7090 B10,5x20x2-HV200-A2C a.req.

11 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C a.req.

12 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2/4

13 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2/4

14 9 090 356 178 screw raised head ISO 7380 M8x16-10.9-DAC-sw 2/4

15 186 440 45 10 guide assy. 1/2 2880 HH

186 440 45 11 guide assy. 1/2 3070 HH , 3170 HH

186 440 45 12 guide assy. 1/2 3370 HH

186 440 45 13 guide assy. 1/2 3570 HH

186 440 45 14 guide assy. 1/2 3770 HH

186 440 45 15 guide assy. 1/2 3970 HH

16 000 955 20 70 clip hose DIN 3017 A80-100x13-W2 2

17 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 4

18 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 8

19 9 210 281 110 nut ISO 4032 934-M8-8A2C 4

20 000 955 03 15 clip 2

21 183 440 25 02 plate guard assy. 1 single reeving

183 440 25 00 cap assy. 1 3rd and 4th reeving

22 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

23 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

24 186 441 15 02 bracket, right 1

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/12 /02 print no.1313 804 90 01 28.10.2009

07

Page 343: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

25 186 441 15 01 bracket 1

26 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

27 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

28 000 918 53 45 fishplate 1/2 not present on right side if sideshifteris installed

29 000 955 06 02 clip 1/2 not present on right side if sideshifteris installed

30 9 008 311 193 hexagon head screw ISO 4017 M8x45-8.8-A2C 1/2 not present on right side if sideshifteris installed

31 188 446 25 16 support 1

32 000 951 72 10 adapter M16x1,5/9-16-18UNF 2/4 not present on right side if sideshifteris installed

33 000 951 39 05 locking cap 9/16-18UNF 2/4

34 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 2

35 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

36 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C /2

37 9 045 311 177 socket-head screw ISO 4762 M8x16-8.8-A2C /2

AUXILIARY HYDRAULIC SERVICES FOR DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/12 /03

07

Page 344: H25CT Manual+Linde
Page 345: H25CT Manual+Linde
Page 346: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1510

13138030712.tif

07/13 /00 print no.1313 804 90 01 28.10.2009

07

Page 347: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

S = standardD = duplexT = triplexHH = lift height (mm)

NOTE: HH = lift height (mm)Quantities indicated in front of the strokeapply to single aux. hydr. services.Quantities indicated behind the strokeapplyto double aux. hydr. services.

1 1510 490 50 00 double hose assy. 5435mm 1 4275 HH

1510 490 50 01 double hose assy. 5685mm 1 4555 HH

1510 490 50 02 double hose assy. 5885mm 1 4705 HH

1510 490 50 03 double hose assy. 6090mm 1 4855 HH

1510 490 50 04 double hose assy. 6290mm 1 5005 HH

1510 490 50 05 double hose assy. 6340mm 1 5155 HH

1510 490 50 06 double hose assy. 6265mm 1 5505 HH

1510 490 50 07 double hose assy. 6515mm 1 5805 HH

1510 490 50 08 double hose assy. 6565mm 1 5955 HH

2 1510 490 50 09 double hose assy. 5205mm 1 4275 HH

1510 490 50 10 double hose assy. 5455mm 1 4555 HH

1510 490 50 11 double hose assy. 5565mm 1 4705 HH

1510 490 50 12 double hose assy. 5615mm 1 4855 HH

1510 490 50 13 double hose assy. 5815mm 1 5005 HH

1510 490 50 14 double hose assy. 5865mm 1 5155 HH

1510 490 50 15 double hose assy. 6195mm 1 5505 HH

1510 490 50 34 double hose assy. 6445mm 1 5805 HH

1510 490 50 35 double hose assy. 6495mm 1 5955 HH

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/13 /01

07

Page 348: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

3 1510 490 50 40 double hose assy. 1934 mm 1 4275 HH

1510 490 50 41 double hose assy. 1983 mm 1 4555 HH

1510 490 50 42 double hose assy. 2033 mm 1 4705 HH , 4855 HH

1510 490 50 43 double hose assy. 2082 mm 1 5005 HH , 5155 HH

1510 490 50 45 double hose assy. 2181 mm 1 5505 HH

1510 490 50 46 double hose assy. 2231 mm 1 5805 HH , 5955 HH

4 183 441 15 11 ***** 1

5 1509 441 09 01 guide 1

6 000 955 20 67 clip hose DIN 3017 A70-90x13-W2 2

7 186 441 58 18 support a.req.

8 183 441 58 24 support 2

9 000 955 36 06 clip clamping 17x18-GD-Zn a.req.

10 9 045 311 135 socket-head screw ISO 4762 M6x25-8.8-A2C a.req.

11 9 292 003 014 washer ISO 7089 A6,4-ST50-A2C a.req.

12 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C a.req.

13 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 a.req.

14 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C a.req.

15 9 045 316 142 socket-head screw ISO 4762 M6x45-8.8-A2C a.req.

16 186 440 45 07 guide assy. 1 4285 HH , 4565 HH , 4715 HH , 4865 HH ,5015 HH , 5165 HH

186 440 45 08 guide assy. 1 5515 HH , 5815 HH , 5965 HH

17 000 955 20 60 clip hose DIN 3017 A32-50x13-W2 4

18 000 955 20 37 cable tie 9X350 BLACK a.req.

19 186 440 45 04 guide assy. 1 4275 HH

186 440 45 05 guide assy. 1 4555 HH , 4705 HH , 4855 HH , 5005 HH ,5155

186 440 45 06 guide assy. 1 5505 HH , 5805 HH , 5955 HH

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/13 /02 print no.1313 804 90 01 28.10.2009

07

Page 349: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

20 186 440 24 10 guide assy. 1 4275 HH

186 440 24 11 guide assy. 1 4555 HH

186 440 24 12 guide assy. 1 4705 HH , 4855 HH

186 440 24 13 guide assy. 1 5005 HH , 5155 HH

186 440 24 14 guide assy. 1 5505 HH

186 440 24 15 guide assy. 1 5805 HH , 5955 HH

21 9 045 316 183 socket-head screw ISO 4762 M8x25-8.8-A2C 2

22 183 440 25 00 cap assy. 1 dual , reeving

183 440 25 02 plate guard assy. 1 single , reeving

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

25 188 446 25 16 support 1

26 000 955 03 15 clip 2

27 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 4

28 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

29 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 8

30 186 440 24 22 guide assy. 1 4275 HH , 4555 HH

186 440 24 23 guide assy. 1 4705 HH

186 440 24 24 guide assy. 1 4855 HH

186 440 25 25 ***** 1 5005 HH

186 440 24 26 guide assy. 1 5155 HH

186 440 24 29 guide assy. 1 5505 HH

186 440 24 31 guide assy. 1 5805 HH

186 440 24 32 guide assy. 1 5955 HH

31 9 008 311 239 hexagon head screw ISO 4017 M10x25-8.8-A2C 2

32 9 309 412 020 washer DIN 7349 DIN 7349-10,5x25x4 2

33 9 210 281 130 nut hexagon ISO 4032 DIN 934-M10-8A2C 2

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/13 /03

07

Page 350: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

34 186 441 15 01 bracket /1

35 186 441 15 02 bracket, right 1

36 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1/2

37 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1/2

38 000 955 06 02 clip 1/2 not present on right side if sideshifteris installed

39 000 918 53 45 fishplate 1/2 not present on right side if sideshifteris installed

40 9 008 311 193 hexagon head screw ISO 4017 M8x45-8.8-A2C 1/2 not present on right side if sideshifteris installed

41 000 951 39 05 locking cap 9/16-18UNF 2/4 not present on right side if sideshifteris installed

42 000 951 72 10 adapter M16x1,5/9-16-18UNF 2/4 not present on right side if sideshifteris installed

43 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 2

44 186 440 24 46 guide assy. 1 4275 HH

186 440 24 47 guide assy. 1 4555 HH , 4705 HH

186 440 24 48 guide assy. 1 4855 HH , 5005 HH

186 440 46 26 guide assy. 1 5155 HH

186 440 24 49 guide assy. 1 5505 HH

186 440 24 50 guide assy. 1 5805 HH

186 440 24 51 guide assy. 1 5955 HH

AUXILIARY HYDRAULIC SERVICES FOR TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/13 /04 print no.1313 804 90 01 28.10.2009

07

Page 351: H25CT Manual+Linde
Page 352: H25CT Manual+Linde

AUXILIARY HYDRAULIC SERVICES FOR QUADRUPLE MAST SERIES 45DV MQ AND 55DV MQ

13138030852.tif

07/14 /00 print no.1313 804 90 01 28.10.2009

07

Page 353: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 955 16 27 clamp block 12

2 000 955 16 28 hose clip 2

3 000 955 15 12 cover plate 6

4 000 955 15 13 clamp block 1

5 346 446 24 01 angle 1 single reeving

346 446 25 04 support 1 dual reeving

6 000 952 75 33 elbow union 4

7 000 955 30 95 ***** 2

8 000 901 90 89 screw 2

9 000 901 16 28 hexagon head screw M10x25 8

10 000 901 00 00 socket head screw M22x1,5x105-10.9-PHR 1 single reeving

000 901 16 29 hexagon head screw M12x100 1 dual reeving

11 000 901 16 31 hexagon head screw M12x50 2

12 000 901 16 26 hexagon head screw M6x16 4

13 000 901 16 30 hexagon head screw M6x25 14

14 000 904 10 14 hexagon nut M10 1

15 000 904 12 10 hexagon nut M12 1

16 1313 446 24 00 ***** 2

17 1313 446 25 00 ***** 2

18 000 907 09 21 lock washer 8

19 000 907 09 22 lock washer 2

20 000 907 09 23 lock washer 4

21 1313 446 25 01 ***** 1

22 1313 446 25 02 ***** 1

23 000 904 60 80 nut 4

24 1313 448 54 09 ***** 1 lift height 240 inch , 45DV MQ

1313 448 54 10 ***** 1 lift height 258 inch , 45DV MQ

AUXILIARY HYDRAULIC SERVICES FOR QUADRUPLE MAST SERIES 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/14 /01

07

Page 354: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1313 448 54 11 ***** 1 lift height 276 inch , 45DV MQ

1313 448 54 10 ***** 1 lift height 245 inch , 55DV MQ

1313 448 54 11 ***** 1 lift height 260 inch , 55DV MQ

1313 448 54 11 ***** 1 lift height 275 inch , 55DV MQ

25 1313 448 54 03 ***** 1 lift height 240 inch , 45DV MQ

1313 448 54 04 ***** 1 lift height 258 inch , 45DV MQ

1313 448 54 05 ***** 1 lift height 276 inch , 45DV MQ

1313 448 54 04 ***** 1 lift height 245 inch , 55DV MQ

1313 448 54 05 ***** 1 lift height 260 inch , 55DV MQ

1313 448 54 05 ***** 1 lift height 275 inch , 55DV MQ

26 1313 448 54 06 ***** 1 lift height 240 inch , 45DV MQ

1313 448 54 07 ***** 1 lift height 258 inch , 45DV MQ

1313 448 54 08 ***** 1 lift height 276 inch , 45DV MQ

1313 448 54 07 ***** 1 lift height 245 inch , 55DV MQ

1313 448 54 08 ***** 1 lift height 260 inch , 55DV MQ

1313 448 54 08 ***** 1 lift height 275 inch , 55DV MQ

27 1313 448 54 00 ***** 1 lift height 240 inch , 45DV MQ

1313 448 54 01 ***** 1 lift height 258 inch , 45DV MQ

1313 448 54 02 ***** 1 lift height 276 inch , 45DV MQ

1313 448 54 01 ***** 1 lift height 245 inch , 55DV MQ

1313 448 54 02 ***** 1 lift height 260 inch , 55DV MQ

1313 448 54 02 ***** 1 lift height 275 inch , 55DV MQ

28 000 912 95 28 ***** 2

29 000 926 42 12 roller 2

30 000 926 42 19 ***** 2

31 000 907 50 42 spring-type straight pin 2

32 000 901 50 10 socket head screw 2

AUXILIARY HYDRAULIC SERVICES FOR QUADRUPLE MAST SERIES 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

07/14 /02 print no.1313 804 90 01 28.10.2009

07

Page 355: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

33 000 916 96 42 ring 2 single reeving

000 916 96 41 bush 2 dual reeving

34 000 914 82 22 washer 2

35 000 951 55 08 grease nipple 1 single reeving only

36 000 951 21 54 pipe union 1 single reeving only

37 346 448 31 12 hose line 2 lift height 240 inch , 45DV MQ

346 448 31 14 hose line 2 lift height 258 inch , 45DV MQ

1313 440 36 05 ***** 2 lift height 276 inch , 45DV MQ

346 448 31 14 hose line 2 lift height 245 inch , 55DV MQ

1313 440 36 05 ***** 2 lift height 260 inch , 55DV MQ

1313 440 36 09 ***** 2 lift height 275 inch , 55DV MQ

38 346 448 31 11 hose line 2 lift height 240 inch , 45DV MQ

346 448 31 13 hose line 2 lift height 258 inch , 45DV MQ

1313 440 36 06 ***** 2 lift height 276 inch , 45DV MQ

346 448 31 13 hose line 2 lift height 245 inch , 55DV MQ

1313 440 36 06 ***** 2 lift height 260 inch , 55DV MQ

1313 440 36 09 ***** 2 lift height 275 inch , 55DV MQ

39 346 448 31 03 hose line 2 lift height 240 inch , 45DV MQ

346 448 31 04 hose line 2 lift height 258 inch , 45DV MQ

1313 440 36 07 ***** 2 lift height 276 inch , 45DV MQ

3464 480 31 04 ***** 2 lift height 245 inch , 55DV MQ

1313 440 36 07 ***** 2 lift height 260 inch , 55DV MQ

131 440 36 10 ***** 2 lift height 275 inch , 55DV MQ

AUXILIARY HYDRAULIC SERVICES FOR QUADRUPLE MAST SERIES 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 07/14 /03

07

Page 356: H25CT Manual+Linde
Page 357: H25CT Manual+Linde

Register 08 : LIFT MAST08/00 00 - 01 MAST IDENTIFICATION08/01 00 - 03 SIMPLEX MAST SERIES 150908/02 00 - 04 DUPLEX MAST SERIES 150908/03 00 - 05 TRIPLEX MAST SERIES 150908/04 00 - 01 LIFT CYLINDER FOR SIMPLEX MAST SERIES 150908/05 00 - 03 EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST 150908/06 00 - 02 MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT TYPE 150908/07 00 - 01 FORK CARRIAGE SERIES 1509 MAST08/08 00 - 01 LOAD BACKREST08/09 00 - 02 INTEGRAL SIDESHIFTER SERIES 1509 MAST08/10 00 - 01 HANG-ON SIDESHIFTER 150908/11 00 - 03 SIMPLEX MAST SERIES 151008/12 00 - 04 DUPLEX MAST SERIES 151008/13 00 - 05 TRIPLEX MAST SERIES 151008/14 00 - 01 LIFT CYLINDER FOR SIMPLEX MAST SERIES 151008/15 00 - 03 EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST SERIES 151008/16 00 - 02 MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT SERIES 151008/17 00 - 01 FORK CARRIAGE SERIES 1510 MAST08/18 00 - 02 INTEGRAL SIDESHIFTER MAST SERIES 151008/19 00 - 01 HANG-ON SIDESHIFTER 151008/20 00 - 05 QUADRUPLE MAST 45DV MQ AND 55DV MQ08/21 00 - 01 LEFT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST08/22 00 - 01 RIGHT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST08/23 00 - 01 FREE LIFT CYLINDER 45DV MQ and 55DV MQ08/24 00 - 01 FORK CARRIAGE FOR QUAD MAST 45DV MQ and 55DV MQ08/25 00 - 02 INTERGRAL SIDSHIFTER QUAD MAST 45DV MQ, 55DV MQ08/26 00 - 01 HANG-ON SIDESHIFTER QUAD MAST

H25/27/30/32

28.10.2009 print no.1313 804 90 01

08

Page 358: H25CT Manual+Linde
Page 359: H25CT Manual+Linde
Page 360: H25CT Manual+Linde

MAST IDENTIFICATION

13138032000.tif

08/00 /00 print no.1313 804 90 01 28.10.2009

08

Page 361: H25CT Manual+Linde
Page 362: H25CT Manual+Linde

SIMPLEX MAST SERIES 1509

13138030801.tif

08/01 /00 print no.1313 804 90 01 28.10.2009

08

Page 363: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 1509 410 10 00 lift mast outer assy. 2850HH 1

1509 410 10 01 lift mast outer assy. 3050HH 1

1509 410 10 09 lift mast outer assy. 3150HH 1

1509 410 10 02 lift mast outer assy. 3350HH 1

1509 410 10 03 lift mast outer assy. 3450HH 1

1509 410 10 04 lift mast outer assy. 3550HH 1

1509 410 10 05 lift mast outer assy. 3750HH 1

1509 410 10 06 lift mast outer assy. 4050HH 1

1509 410 10 07 lift mast outer assy. 4550HH 1

1509 410 10 08 lift mast outer assy. 5250HH 1

2 183 410 15 00 lift mast inner assy. 2850 1

183 410 15 02 lift mast inner assy. 3050 1

183 410 15 03 lift mast inner assy. 3150 1

183 410 15 05 lift mast inner assy. 3350 1

183 410 15 06 lift mast inner assy. 3450 1

183 410 15 07 lift mast inner assy. 3550 1

183 410 15 08 lift mast inner assy. 3750 1

183 410 15 11 lift mast inner assy. 4050 1

183 410 15 15 lift mast inner assy. 4550 1

183 410 15 22 lift mast inner assy. 5250 1

3 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

4 000 924 95 04 support roller 35x80,9x26 4

000 924 95 05 support roller 35x81,2x26 4

SIMPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/01 /01

08

Page 364: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

000 924 95 06 support roller 35x81,5x26 4

5 9 289 600 512 washer support DIN 988 36X45X0.3 a.req.

9 289 600 513 washer support DIN 988 36X45X0.5 a.req.

9 289 600 516 washer support DIN 988 36X45X1.0 a.req.

6 183 446 09 00 guide 2

7 9 455 622 247 retaining ring DIN 471 DIN 471-22x1,75 2

8 1509 446 06 00 ***** 2

9 000 993 36 00 pulley chain 2

10 000 914 09 03 washer plain 8,4x65x6 2

11 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2 loctite 243

12 186 446 16 00 guide 2

13 9 045 316 126 socket-head screw ISO 4762 M6x12-8.8-A2C 2

14 183 446 55 05 anchor chain, right right 2

15 9 309 412 028 washer DIN 7349 17-ST50-A2C 2

16 9 211 281 166 hexagon nut DIN 936 M16X1.5-936-17H-A2C 2

17 9 210 311 166 nut hex ISO 8673 M16X1.5-8A2C 2

18 9 495 103 926 pin chain WN 17514 A8.26X37.2 2

19 1509 441 12 00 junction 1

20 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

21 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

22 9 495 110 075 chain WN 17514 1 2850 HH

9 495 110 079 chain leaf WN 17514 A1-25.4X4X79-KS 1 3050 HH

9 495 110 081 chain WN 17514 A1-25,4x4x81-KS 1 3150 HH

9 495 110 085 chain WN 17514 1 3350 HH

9 495 110 087 chain WN 17514 1 3450 HH

9 495 110 089 chain WN 17514 1 3550 HH

9 495 110 093 chain WN 17514 1 3750 HH

SIMPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/01 /02 print no.1313 804 90 01 28.10.2009

08

Page 365: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

9 495 110 099 chain WN 17514 1 4050 HH

9 495 110 109 chain WN 17514 1 4550 HH

9 495 110 123 chain WN 17514 A1-25,4x4x123-KS 1 5250 HH

183 446 55 03 support chain right 2

24 9 380 620 328 spring dowel sleeve ISO 8752 6x60-ST 2

25 9 133 339 172 screw grub DIN 913 M8X8-22H 4 loctite 243

26 000 914 22 05 shim 22,5x35x0,5 a.req.

27 000 924 96 02 bearing spherical E45-2RS 2

28 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

29 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

30 9 045 316 535 socket head screw ISO 4762 M20x90-8.8-A2C 4

31 9 045 316 126 socket-head screw ISO 4762 M6x12-8.8-A2C 2

32 000 955 05 23 clip 1 4550 HH and 5250 HH only

33 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1 4550 HH and 5250 HH only

34 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 1 4550 HH and 5250 HH only

SIMPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/01 /03

08

Page 366: H25CT Manual+Linde
Page 367: H25CT Manual+Linde
Page 368: H25CT Manual+Linde

DUPLEX MAST SERIES 1509

13138030802.tif

08/02 /00 print no.1313 804 90 01 28.10.2009

08

Page 369: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 1509 410 20 00 lift mast outer assy. 2880/4285HH 1

1509 410 20 01 lift mast outer assy. 3070/4565HH 1

1509 410 20 02 lift mast outer assy. 3170/4715HH 1

1509 410 20 04 lift mast outer assy. 3370/5015HH 1

1509 410 20 09 lift mast outer assy. 3570HH 1

1509 410 20 06 lift mast outer assy. 3770/5515HH 1

1509 410 20 07 lift mast outer assy. 3970/5815HH 1

2 185 410 25 00 inner lift mast assy. 2880HH 1

185 410 25 02 inner lift mast assy. 3070HH 1

185 410 25 03 lift mast inner assy. 3170HH 1

185 410 25 05 lift mast inner assy. 3370HH 1

185 410 25 07 lift mast inner assy. 3570HH 1

185 410 25 08 lift mast inner assy. 3770HH 1

185 410 25 10 lift mast inner assy. 3970HH 1

3 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

4 000 924 95 04 support roller 35x80,9x26 4

000 924 95 05 support roller 35x81,2x26 4

000 924 95 06 support roller 35x81,5x26 4

5 9 289 600 516 washer support DIN 988 36X45X1.0 a.req.

9 289 600 513 washer support DIN 988 36X45X0.5 a.req.

9 289 600 512 washer support DIN 988 36X45X0.3 a.req.

6 183 446 09 00 guide 2

7 9 455 622 167 retaining ring DIN 471 16X1 2

8 000 955 22 09 clip 45X2X25 2

DUPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/02 /01

08

Page 370: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

9 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

10 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 2

11 000 955 02 19 clip 1

12 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

13 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

14 183 440 21 01 pipe assy. 1

15 9 045 316 195 socket-head screw ISO 4762 M8x50-8.8-A2C 3

16 000 944 23 64 safety cartridge LBS-1,5/90 1

17 000 963 23 01 o-ring 30,2x3-V80 1

18 183 446 45 03 fork clevis 1 loctite 243

19 000 993 35 00 pulley chain 1

20 000 912 21 02 pin 45X120 1

21 000 924 85 27 bearing thrust washer DIN 5405 45x65x1 2

22 183 446 24 00 angle 1

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

25 000 962 01 00 plug WN 17253 8.8X9.5 1

26 185 445 05 00 anchor chain 1

27 000 914 23 11 washer plain 23x36x7 St-H 1

28 9 208 156 186 hexagon nut ISO 8675 DIN 439-BM20x1,5-05A2 1

29 9 210 311 186 hexagon nut ISO 8673 DIN 934-M20x1,5-8A2C 1

30 9 495 040 030 link pin rivet A-9,51x71,2 2

31 9 495 116 047 leaf chain A1-25,4x4x47 1 2880 HH

9 495 116 049 leaf chain A1-25,4x4x49 1 3070 HH

9 495 116 051 leaf chain A1-25,4x4x51 1 3170 HH

9 495 116 053 leaf chain A1-25,4x4x53 1 3370 HH

9 495 116 055 leaf chain A1-25,4x4x55 1 3570 HH

DUPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/02 /02 print no.1313 804 90 01 28.10.2009

08

Page 371: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

9 495 116 057 leaf chain A1-25,4x4x57 1 3770 HH

9 495 116 059 leaf chain A1-25,4x4x59 1 3970 HH

32 180 446 55 04 support chain 1

33 1509 448 41 02 pipe 1 2880 HH

1509 448 41 03 pipe 1 3070 HH

185 448 41 16 pipe 1 3170 HH

185 448 41 18 pipe 1 3370 HH

185 448 41 20 pipe 1 3570 HH

185 448 41 22 pipe 1 3770 HH

185 448 41 24 pipe 1 3970 HH

34 1509 448 41 00 pipe 1 2880 HH , 3070 HH

185 448 41 00 pipe 1 3170 HH

185 448 41 02 pipe 1 3370 HH

185 448 41 04 pipe 1 3570 HH

185 448 41 06 pipe 1 3770 HH

185 448 41 08 pipe 1 3970 HH

35 1509 441 12 01 junction 1

36 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

37 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

38 9 380 620 322 spring dowel sleeve ISO 8752 6x36-ST 2

39 9 133 339 172 screw grub DIN 913 M8X8-22H 4

40 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 1

41 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

42 000 955 01 04 clip DIN 1596 19 bk 2

43 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

44 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

DUPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/02 /03

08

Page 372: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

45 185 446 63 08 connector 2 for lift height 3070 HH , 3170 HH , 3370 HH3570 HH , 3770 HH , 3970 HH

1509 446 63 00 connector 2 for lift height 2880 HH

46 000 944 24 12 throttle valve LBS-1,0/45 2

47 9 289 600 227 shim DIN 988 17X24X0.5-H a.req.

48 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

49 000 924 96 02 bearing spherical E45-2RS 2

50 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

51 9 045 316 535 socket head screw ISO 4762 M20x90-8.8-A2C 4

DUPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/02 /04 print no.1313 804 90 01 28.10.2009

08

Page 373: H25CT Manual+Linde
Page 374: H25CT Manual+Linde

TRIPLEX MAST SERIES 1509

13138030805.tif

08/03 /00 print no.1313 804 90 01 28.10.2009

08

Page 375: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

- HH = lift height (mm)

1 1509 410 20 00 lift mast outer assy. 2880/4285HH 1

1509 410 20 01 lift mast outer assy. 3070/4565HH 1

1509 410 20 02 lift mast outer assy. 3170/4715HH 1

1509 410 20 03 lift mast outer assy. 4865HH 1

1509 410 20 04 lift mast outer assy. 3370/5015HH 1

1509 410 20 05 lift mast outer assy. 5165HH 1

1509 410 20 06 lift mast outer assy. 3770/5515HH 1

1509 410 20 07 lift mast outer assy. 3970/5815HH 1

1509 410 20 08 lift mast outer assy. 5965HH 1

2 1509 410 36 00 lift mast central assy. 4285HH 1

1509 410 36 01 lift mast central assy. 4565HH 1

1509 410 36 02 lift mast central assy. 4715HH 1

1509 410 36 03 lift mast central assy. 4865HH 1

1509 410 36 04 lift mast central assy. 5015HH 1

1509 410 36 05 lift mast central assy. 5165HH 1

1509 410 36 06 lift mast central assy. 5515HH 1

1509 410 36 07 lift mast central assy. 5815HH 1

1509 410 36 08 lift mast central assy. 5965HH 1

3 185 410 33 00 inner lift mast assy. 1

185 410 33 02 inner lift mast assy. 4565HH 1

185 410 33 03 lift mast inner assy. 4715HH 1

185 410 33 04 lift mast inner assy. 4865HH 1

185 410 33 05 lift mast inner assy. 5015HH 1

TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/03 /01

08

Page 376: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

185 410 33 06 lift mast inner assy. 5165HH 1

185 410 33 08 lift mast inner assy. 5515HH 1

185 410 33 10 lift mast inner assy. 5815HH 1

185 410 33 11 lift mast inner assy. 5965HH 1

4 000 924 94 04 roller 8

000 924 94 05 roller 8

000 924 94 06 support roller 50x40 8

5 9 289 600 512 washer support DIN 988 36X45X0.3 a.req.

9 289 600 513 washer support DIN 988 36X45X0.5 a.req.

9 289 600 516 washer support DIN 988 36X45X1.0 a.req.

6 186 446 09 00 guide 2

7 9 455 622 167 retaining ring DIN 471 16X1 a.req.

8 000 955 22 84 clip 4

9 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 4

10 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 4

11 000 955 02 19 clip 1

12 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

13 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

14 183 440 21 01 pipe assy. 1

15 9 045 316 195 socket-head screw ISO 4762 M8x50-8.8-A2C 3

16 000 944 23 64 safety cartridge LBS-1,5/90 1

17 000 963 23 01 o-ring 30,2x3-V80 1

18 183 446 45 03 fork clevis 1 loctite 243

19 000 993 35 00 pulley chain 1

20 000 912 21 02 pin 45X120 1

21 000 924 85 27 bearing thrust washer DIN 5405 45x65x1 2

22 183 446 24 00 angle 1

TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/03 /02 print no.1313 804 90 01 28.10.2009

08

Page 377: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

25 000 962 01 00 plug WN 17253 8.8X9.5 1

26 185 445 05 00 anchor chain 1

27 000 914 23 11 washer plain 23x36x7 St-H 2

28 9 208 156 186 hexagon nut ISO 8675 DIN 439-BM20x1,5-05A2 2

29 9 210 311 186 hexagon nut ISO 8673 DIN 934-M20x1,5-8A2C 2

30 9 495 040 030 link pin rivet A-9,51x71,2 2

31 9 495 116 047 leaf chain A1-25,4x4x47 1 for 4285 HH

9 495 116 049 leaf chain A1-25,4x4x49 1 for 4565 HH

9 495 116 051 leaf chain A1-25,4x4x51 1 for 4715 HH , 4865 HH

9 495 116 053 leaf chain A1-25,4x4x53 1 for 5015 HH , 5165 HH

9 495 116 057 leaf chain A1-25,4x4x57 1 5515 HH

9 495 116 059 leaf chain A1-25,4x4x59 1 5815 HH , 5965 HH

32 180 446 55 04 support chain 1

33 1509 448 34 00 pipe line 1 4285 HH

1509 448 34 01 pipe line 1 4565 HH

1509 448 34 02 pipe line 1 4715 HH

1509 448 34 03 pipe line 1 4865 HH

1509 448 34 04 pipe line 1 5015 HH

1509 448 34 05 pipe line 1 5165 HH

1509 448 34 06 pipe line 1 5515 HH

1509 448 34 07 pipe line 1 5815 HH

1509 448 34 08 pipe line 1 5965 HH

34 1509 448 34 09 pipe line 1 4285 HH

1509 448 34 10 pipe line 1

1509 448 34 11 pipe line 1

TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/03 /03

08

Page 378: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1509 448 34 12 pipe line 1

1509 448 34 13 pipe line 1

1509 448 34 14 pipe line 1

1509 448 34 15 pipe line 1

1509 448 34 16 pipe line 1

1509 448 34 17 pipe line 1

35 1509 448 34 50 pipe line 1 4285 HH

1509 448 34 51 pipe line 1

1509 448 34 52 pipe line 1

1509 448 34 53 pipe line 1

1509 448 34 54 pipe line 1

1509 448 34 55 pipe line 1

1509 448 34 56 pipe line 1

1509 448 34 57 pipe line 1

1509 448 34 58 pipe line 1 5965 HH

36 1509 448 34 59 pipe line 1 4285 HH

1509 448 34 60 pipe line 1 4565 HH

1509 448 34 61 pipe line 1 4715 HH

1509 448 34 62 pipe line 1 4865 HH

1509 448 34 63 pipe line 1 5015 HH

1509 448 34 64 pipe line 1 5165 HH

1509 448 34 65 pipe line 1 5515 HH

1509 448 34 66 pipe line 1 5815 HH

1509 448 34 67 pipe line 1 5965 HH

37 183 446 63 29 connector 4 4285 HH , loctite 243

185 446 63 09 connector 4 for 4565 HH , 4715 HH , 4865 HH ,5015 HH , 5165 HH , loctite 243

TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/03 /04 print no.1313 804 90 01 28.10.2009

08

Page 379: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

185 446 63 10 connector 4 for 5515 HH , 5815 HH ,5965 HH , loctite 243

38 000 944 24 12 throttle valve LBS-1,0/45 4

39 9 289 600 227 shim DIN 988 17X24X0.5-H a.req.

40 186 446 25 07 support 4

41 9 027 316 188 bolt coach DIN 603 M8X35-8.8A2C 2

42 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

43 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

44 000 955 01 04 clip DIN 1596 19 bk 2

45 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

46 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

47 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 1

48 000 914 16 34 washer 1

49 9 380 620 322 spring dowel sleeve ISO 8752 6x36-ST 4

50 9 133 339 172 screw grub DIN 913 M8X8-22H 6 loctite 243

51 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

52 1509 441 12 01 junction 1

53 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

54 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

55 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

56 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

57 000 924 96 02 bearing spherical E45-2RS 2

58 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

59 9 045 316 535 socket head screw ISO 4762 M20x90-8.8-A2C 4

TRIPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/03 /05

08

Page 380: H25CT Manual+Linde
Page 381: H25CT Manual+Linde
Page 382: H25CT Manual+Linde

LIFT CYLINDER FOR SIMPLEX MAST SERIES 1509

13138030823.tif

08/04 /00 print no.1313 804 90 01 28.10.2009

08

Page 383: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 5172 440 79 34 lift cylinder assy. 1552 mm 2 2850 HH

5172 440 79 35 lift cylinder assy. 1652 mm 2 3050 HH

5172 470 00 01 lift cylinder assy. 1702 mm 2 3150 HH

5172 440 79 36 lift cylinder assy. 1802 mm 2 3350 HH

5172 440 79 37 lift cylinder assy. 1852 mm 2 3450 HH

5172 440 79 38 lift cylinder assy. 1902 mm 2 3550 HH

5172 440 79 39 lift cylinder assy. 2002 mm 2 3750 HH

5172 440 79 40 lift cylinder assy. 2152 mm 2 4050 HH

5172 440 79 41 lift cylinder assy. 2402 mm 2 4550 HH

5172 440 79 42 lift cylinder assy. 2752 mm 2 5250 HH

2 5172 470 10 21 ***** 1

3 000 963 25 53 o-ring BS 4518 57,2x3-NBR90 1

4 000 962 19 86 seal ring grooved 46-56-7,3 1

5 000 962 26 56 WIPER 1

6 000 901 30 40 ***** 1

7 9 636 801 037 seal ring DIN 7603 A6X10-Cu 1

8 ---------- 4 1

9 ---------- 4 1

10 000 944 24 14 throttle valve M22x1,5/45ltr./min 1

11 1509 446 06 00 ***** 1

12 000 907 11 07 ring snap 1

13 000 962 33 35 band rotating driving 1

14 000 955 05 23 clip 1 4550 HH and 5250 HH

LIFT CYLINDER FOR SIMPLEX MAST SERIES 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/04 /01

08

Page 384: H25CT Manual+Linde
Page 385: H25CT Manual+Linde
Page 386: H25CT Manual+Linde

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST 1509

13138030819.tif

08/05 /00 print no.1313 804 90 01 28.10.2009

08

Page 387: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

Quanities after stroke apply to triple mast

1 5178 440 53 33 lift cylinder assy. 1530 mm 1/2 2880 HH Duplex , 4285 HH Triplex

5178 440 53 34 lift cylinder assy. 1620 mm 1/2 3070 HH Duplex , 4565 HH Triplex

5178 440 53 35 lift cylinder assy. 1670 mm 1/2 3170 HH Duplex , 4715 HH Triplex

5178 440 53 36 lift cylinder assy. 1720 mm 1/2 4865 HH

5178 440 53 37 lift cylinder assy. 1770 mm 1/2 3370 HH Duplex , 5015 HH Triplex

5178 440 53 38 lift cylinder assy. 1820 mm 1/2 5165 HH

5178 440 62 20 lift cylinder assy. 1870 mm 1/2 3570 HH

5178 440 53 39 lift cylinder assy. 1920 mm 1/2 5515 HH

5178 440 53 42 lift cylinder assy. 1970 mm 1/2 3770 HH

5178 440 53 40 lift cylinder assy. 2020 mm 1/2 5815 HH

5178 440 53 41 lift cylinder assy. 2070 mm 1/2 3970 HH Duplex , 5965 HH Triplex

2 5172 440 79 23 lift cylinder assy. 1530 mm 1 2880 HH Duplex , 4285 HH Triplex

5172 440 79 24 lift cylinder assy. 1620 mm 1 3070 HH Duplex , 4565 HH Triplex

5172 440 79 25 lift cylinder assy. 1670 mm 1 3170 HH Duplex , 4715 HH Triplex

5172 440 79 26 lift cylinder assy. 1720 mm 1 4865 HH

5172 440 79 27 lift cylinder assy. 1770 mm 1 3370 HH Duplex , 5015 HH Triplex

5172 440 79 28 lift cylinder assy. 1820 mm 1 5165 HH

5172 440 00 02 ***** 1 3570 HH

5172 440 79 29 lift cylinder assy. 1920 mm 1 5515 HH

5172 440 79 32 lift cylinder assy. 1970 mm 1 3770 HH

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/05 /01

08

Page 388: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

5172 440 79 30 lift cylinder assy. 2020 mm 1 5815 HH

5172 440 79 31 lift cylinder assy. 2070 mm 1 3970 HH Duplex , 5965 HH Triplex

3 5176 440 52 72 lift cylinder assy. 1530 mm 1 4285 HH

5176 440 52 73 lift cylinder assy. 1620 mm 1 4565 HH

5176 440 52 74 lift cylinder assy. 1670 mm 1 4715 HH

5176 440 52 75 lift cylinder assy. 1720 mm 1 4865 HH

5176 440 52 76 lift cylinder assy. 1770 mm 1 5015 HH

5176 440 52 77 lift cylinder assy. 1820 mm 1 5165 HH

5176 440 52 78 lift cylinder assy. 1920 mm 1 5515 HH

5176 440 52 79 lift cylinder assy. 2020 mm 1 5815 HH

5176 440 52 80 lift cylinder assy. 2070 mm 1 5965 HH

4 000 944 24 14 throttle valve M22x1,5/45ltr./min 1

5 185 446 11 00 piston 1

6 185 446 12 00 cover piston 1

7 000 907 04 01 ring snap 1

8 000 914 75 47 washer 1

9 000 921 26 52 spring compression 2,6x20,3x80x10 1

10 000 915 90 36 ring 1

11 000 955 22 84 clip 1 Triplex

000 955 22 09 clip 45X2X25 1 Duplex

12 5171 470 10 17 ***** 1 complete

13 000 963 03 08 O-ring 39x2,5-NBR90 1

14 000 962 19 85 seal ring grooved 32-42-7,3 1

15 000 962 24 10 ***** 1

16 000 901 30 40 ***** 1

17 9 636 801 037 seal ring DIN 7603 A6X10-Cu 1

18 9 464 620 257 snap ring DIN 7993 1

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/05 /02 print no.1313 804 90 01 28.10.2009

08

Page 389: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

19 000 961 00 18 ring sealing 1

20 5176 446 12 09 ***** 1

21 5176 345 03 01 ***** 1

22 000 903 75 41 ***** 1

23 000 962 37 11 seal ring 1

24 000 962 33 39 guide ring 36x5,5x2,5-HG 1

25 ---------- 4 1 not available individually

26 ---------- 4 1 not available individually

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/05 /03

08

Page 390: H25CT Manual+Linde
Page 391: H25CT Manual+Linde
Page 392: H25CT Manual+Linde

MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT TYPE 1509

13138190810.tif

08/06 /00 print no.1313 804 90 01 28.10.2009

08

Page 393: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 5176 440 53 41 lift cylinder assy. 886.5 mm 1 2880 HH Duplex , 4285 HH Triplex

5176 440 53 42 lift cylinder assy. 936.5 mm 1 3070 HH Duplex , 4565 HH Triplex

185 440 52 75 lift cylinder assy. 1 3170 HH Duplex , 4715 HH Triplex

185 440 52 76 lift cylinder assy. 1 4865 HH

185 440 52 77 lift cylinder assy. 1 3370 HH Duplex , 5015 HH Triplex

185 440 52 78 lift cylinder assy. 1 5165 HH

185 440 52 79 lift cylinder assy. 1 3570 HH

185 440 52 80 lift cylinder assy. 1 3770 HH Duplex , 5515 HH Triplex

185 440 52 82 lift cylinder assy. 1 3970 HH Duplex , 5815 HH Triplex

185 440 52 83 lift cylinder assy. 1 5965 HH

2 ---------- 4 1 not available individually

3 ---------- 4 1 not available individually

4 000 916 21 08 bush 1

5 185 446 12 02 cover piston 1

6 000 961 00 19 ring sealing 74x58,5x6,3 1

7 000 962 33 38 guide ring 74x69x5,6-HG 1

8 5176 345 03 01 ***** 1

9 000 903 75 41 ***** 1

10 5172 470 10 33 ***** 1 item 11-15

11 000 962 29 09 ring sealing 85,1x80,5x3,9 1

12 000 962 19 87 seal ring grooved 68-78-7,3 1

13 000 962 25 79 seal wiper TYP846 68x76x4/6 1

14 002 903 02 00 hexagon head screw DIN 933 M6x6-8.8-A2A 1

MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT TYPE 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/06 /01

08

Page 394: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

15 9 636 801 037 seal ring DIN 7603 A6X10-Cu 1

MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT TYPE 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/06 /02 print no.1313 804 90 01 28.10.2009

08

Page 395: H25CT Manual+Linde
Page 396: H25CT Manual+Linde

FORK CARRIAGE SERIES 1509 MAST

13138030800.tif

08/07 /00 print no.1313 804 90 01 28.10.2009

08

Page 397: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1509 440 91 00 fork carriage assy. 1 simple , double mast

1a 1509 440 91 01 fork carriage assy. 1 triple

2 183 446 14 01 stop 1 simple only

2a 183 446 14 12 stop 1 triplex

3 9 045 355 298 screw cap hd ISO 4762 M12x30-10.9-MK 1 loctite 243

4 9 381 660 478 cylindrical pin ISO 8734 12m6x50-A-St 2 Loctite nr. 270

5 000 964 45 11 joiner (groove) 2

6 000 903 02 77 screw plug 2 Loctite nr. 243

7 000 924 95 04 support roller 35x80,9x26 a.req.

000 924 95 05 support roller 35x81,2x26 a.req.

000 924 95 06 support roller 35x81,5x26 a.req.

8 000 914 05 12 washer 5x9,5x0,5 a.req.

000 914 05 13 ***** a.req.

000 914 05 16 washer 5x21,3x3 a.req.

9 9 007 311 306 hexagon head bolt ISO 4014 M12x50-8.8-A2C 2

10 9 210 281 140 hexagon nut ISO 4032 DIN 934-M12-8A2C 2

11 9 309 412 022 washer DIN 7349 DIN 7349-13x30x6-A2C 4

FORK CARRIAGE SERIES 1509 MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/07 /01

08

Page 398: H25CT Manual+Linde
Page 399: H25CT Manual+Linde
Page 400: H25CT Manual+Linde

LOAD BACKREST

3468030818.tif

08/08 /00 print no.1313 804 90 01 28.10.2009

08

Page 401: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1508 430 72 00 load backrest assy. 48" high 1 class 2

1a 1508 430 72 03 load backrest assy. 36" high 1 class 3

2 9 008 311 300 1 hexagon head screw ISO 4017 M12x35-8.8-A2C 2

3 9 309 412 022 1 washer DIN 7349 DIN 7349-13x30x6-A2C a.req. annex fork carriage

4 9 210 281 140 1 hexagon nut ISO 4032 DIN 934-M12-8A2C 2

5 9 008 311 300 1 hexagon head screw ISO 4017 M12x35-8.8-A2C 2 sideshifter

LOAD BACKREST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/08 /01

08

Page 402: H25CT Manual+Linde
Page 403: H25CT Manual+Linde
Page 404: H25CT Manual+Linde

INTEGRAL SIDESHIFTER SERIES 1509 MAST

13138030809.tif

08/09 /00 print no.1313 804 90 01 28.10.2009

08

Page 405: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1509 440 98 00 sideshift assy. std/dup 5000lb 980mm 1 Simplex/Duplex lift mast (items 1-18)

1509 440 98 01 sideshift assy. triplex 5000lb 980mm 1 Triplex mast (items 1-18)

1 1508 440 91 05 ***** 1

2 1508 441 07 01 ***** 1

3 1508 441 36 00 ***** 1

4 1508 446 10 01 ***** 2

5 1509 440 63 01 ***** 1 Simplex mast / Duplex lift mast

5a 1509 440 63 02 ***** 1 Triplex

6 1508 446 56 00 *****

7 1508 446 56 01 ***** 2

8 1508 446 10 02 ***** 2

9 1508 446 37 00 ***** 2

10 1508 446 27 00 ***** a.req.

11 1508 446 25 04 ***** 2

12 1508 440 68 00 ***** 2

13 000 952 31 04 screw joint 10L9/16UNFCF 2

14 000 924 95 04 support roller 35x80,9x26 a.req.

000 924 95 05 support roller 35x81,2x26 a.req.

000 924 95 06 support roller 35x81,5x26 a.req.

15 9 289 600 512 washer support DIN 988 36X45X0.3 a.req.

9 289 600 513 washer support DIN 988 36X45X0.5 a.req.

9 289 600 516 washer support DIN 988 36X45X1.0 a.req.

16 000 903 02 77 screw plug 2 top rollers only , loctite 243

17 000 964 45 11 joiner (groove) 2

18 183 446 14 01 stop 1 Simplex

183 446 14 12 stop 1 Duplex / Triplex lift mast

19 9 381 660 478 cylindrical pin ISO 8734 12m6x50-A-St 2 loctite 270

INTEGRAL SIDESHIFTER SERIES 1509 MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/09 /01

08

Page 406: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

20 9 045 355 298 screw cap hd ISO 4762 M12x30-10.9-MK 1 loctite 243

21 1509 448 41 04 pipe 1 Simplex mast only

22 1509 448 41 05 pipe 1 Simplex mast only

23 9 758 003 091 clip DIN 1592 9x9 bk A2C 2

24 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

25 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 2

INTEGRAL SIDESHIFTER SERIES 1509 MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/09 /02 print no.1313 804 90 01 28.10.2009

08

Page 407: H25CT Manual+Linde
Page 408: H25CT Manual+Linde

HANG-ON SIDESHIFTER 1509

13138030812.tif

08/10 /00 print no.1313 804 90 01 28.10.2009

08

Page 409: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 347 440 91 23 HOSS, CL2, 38.5"-W, CASC-55F 1

2 000 952 31 04 screw joint 10L9/16UNFCF 2

3 801 FTG,ADP,90°,9/16M-SAE,9/16M-JIC,w/O-RING simple mast

4 153631 ASSY, TUBE, INSIDE, REEVING simple mast

5 010132 ***** simple mast

6 S010549 FTG,ADP,STR,9/16-M SAE TO M20X1.5-M EO simple mast

HANG-ON SIDESHIFTER 1509

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/10 /01

08

Page 410: H25CT Manual+Linde
Page 411: H25CT Manual+Linde
Page 412: H25CT Manual+Linde

SIMPLEX MAST SERIES 1510

13138030803.tif

08/11 /00 print no.1313 804 90 01 28.10.2009

08

Page 413: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 1510 410 10 00 lift mast outer assy. 2850HH 1

1510 410 10 01 lift mast outer assy. 3050HH 1

1510 410 10 07 lift mast outer assy. 3150HH 1

1510 410 10 08 lift mast outer assy. 3350HH 1

1510 410 10 02 lift mast outer assy. 3450HH 1

1510 410 10 09 lift mast outer assy. 3550HH 1

1510 410 10 03 lift mast outer assy. 3750HH 1

1510 410 10 04 lift mast outer assy. 4050HH 1

1510 410 10 05 lift mast outer assy. 4550HH 1

1510 410 10 06 lift mast outer assy. 5250HH 1

2 186 410 15 00 lift mast inner assy. 2850 1

186 410 15 02 lift mast inner assy. 3050 1

186 410 15 03 lift mast inner assy. 3050/3150 1

186 410 15 05 lift mast inner assy. 3250/3350 1

186 410 15 06 lift mast inner assy. 3350/3450 1

186 410 15 77 lift mast inner assy. 3550HH 1

186 410 15 08 lift mast inner assy. 3650/3750 1

186 410 15 11 lift mast inner assy. 3950/4050 1

186 410 15 15 lift mast inner assy. 4450/4550 1

186 410 15 22 lift mast inner assy. 5150/5250 1

3 9 455 622 247 retaining ring DIN 471 DIN 471-22x1,75 2

4 9 289 600 582 washer shim DIN 988 40X50X0.3 a.req.

9 289 600 583 washer support DIN 988 40x50x0,5 a.req.

SIMPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/11 /01

08

Page 414: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

9 289 600 586 washer support DIN 988 40X50X1 a.req.

5 000 924 94 75 support roller 4

000 924 94 76 support roller 90,2 mm 4

000 924 94 77 support roller 90,5 mm 4

6 186 446 09 57 guide 2

7 000 993 36 00 pulley chain 2

8 000 914 09 03 washer plain 8,4x65x6 2

9 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2 loctite 243

10 186 446 16 00 guide 2

11 9 045 316 126 socket-head screw ISO 4762 M6x12-8.8-A2C 2

12 9 495 103 926 pin chain WN 17514 A8.26X37.2 4

13 183 446 55 05 anchor chain, right right 2

14 9 309 412 028 washer DIN 7349 17-ST50-A2C 2

15 9 211 281 166 hexagon nut DIN 936 M16X1.5-936-17H-A2C 2

16 9 210 311 166 nut hex ISO 8673 M16X1.5-8A2C 2

17 000 914 22 05 shim 22,5x35x0,5 a.req.

18 9 495 103 926 pin chain WN 17514 A8.26X37.2 2

19 183 446 55 03 support chain right 2

20 9 495 110 081 chain WN 17514 A1-25,4x4x81-KS 2 2850 HH

9 495 110 085 chain WN 17514 2 3050 HH

9 495 110 087 chain WN 17514 2 3150 HH

9 495 110 091 chain WN 17514 2 3350 HH

9 495 110 093 chain WN 17514 2 3450 HH

9 495 110 093 chain WN 17514 2 3550 HH

9 495 110 097 chain WN 17514 2 3750 HH

9 495 110 103 chain WN 17514 2 4050 HH

9 495 110 113 chain WN 17514 2 4550 HH

SIMPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/11 /02 print no.1313 804 90 01 28.10.2009

08

Page 415: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

9 495 110 127 leaf chain WN 17514 A1-25,4x4x127-KS 2 5250 HH

21 186 446 93 03 covering, rubber 2

22 000 955 05 24 clip 2

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 1

25 1510 441 12 00 junction 1

26 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

27 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

28 9 133 339 172 screw grub DIN 913 M8X8-22H 4 loctite 243

29 9 380 620 328 spring dowel sleeve ISO 8752 6x60-ST 2

30 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

31 9 045 316 126 socket-head screw ISO 4762 M6x12-8.8-A2C 2

32 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

33 000 924 96 02 bearing spherical E45-2RS 2

34 9 045 316 535 socket head screw ISO 4762 M20x90-8.8-A2C 4

35 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

36 000 955 05 23 clip 2 4550 HH and 5250 HH only

37 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2 4550 HH and 5250 HH only

38 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 2 4550 HH and 5250 HH only

SIMPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/11 /03

08

Page 416: H25CT Manual+Linde
Page 417: H25CT Manual+Linde
Page 418: H25CT Manual+Linde

DUPLEX MAST SERIES 1510

13138030825.tif

08/12 /00 print no.1313 804 90 01 28.10.2009

08

Page 419: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 1510 410 20 00 lift mast outer assy. 2875/4275HH 1

1510 410 20 01 lift mast outer assy. 3065/4555HH 1

1510 410 20 03 lift mast outer assy. 3265/4855HH 1

1510 410 20 04 lift mast outer assy. 3365/5005HH 1

1510 410 20 05 lift mast outer assy. 3465/5155HH 1

1510 410 20 06 lift mast outer assy. 3765/5505HH 1

1510 410 20 07 lift mast outer assy. 3965/5805HH 1

2 1510 410 25 00 lift mast inner assy. 2875HH 1

1510 410 25 01 lift mast inner assy. 3065HH 1

188 410 25 01 lift mast inner assy. 3215/3265HH 1

188 410 25 02 lift mast inner assy. 3315/3365HH 1

188 410 25 03 lift mast inner assy. 3465HH 1

188 410 25 05 lift mast inner assy. 3715/3765HH 1

188 410 25 07 lift mast inner assy. 3915/3965HH 1

3 1510 441 12 01 junction 1

4 000 924 94 75 support roller 4

000 924 94 76 support roller 90,2 mm 4

000 924 94 77 support roller 90,5 mm 4

5 9 289 600 582 washer shim DIN 988 40X50X0.3 a.req.

9 289 600 583 washer support DIN 988 40x50x0,5 a.req.

9 289 600 586 washer support DIN 988 40X50X1 a.req.

6 186 446 09 57 guide 2

7 9 455 622 167 retaining ring DIN 471 16X1 2

DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/12 /01

08

Page 420: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

8 000 955 22 78 clip 48x2x40 2

9 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 2

10 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

11 000 931 30 58 bracket 1

12 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

13 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

14 183 440 21 01 pipe assy. 1

15 9 045 316 195 socket-head screw ISO 4762 M8x50-8.8-A2C 3

16 000 944 23 50 valve safety 1

17 000 963 23 01 o-ring 30,2x3-V80 1

18 183 446 45 02 fork clevis 1 loctite 243

19 000 993 36 70 chain pulley 1

20 000 912 21 02 pin 45X120 1

21 000 924 85 27 bearing thrust washer DIN 5405 45x65x1 2

22 183 446 24 00 angle 1

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

25 000 962 01 00 plug WN 17253 8.8X9.5 1

26 186 446 55 01 anchor, chain 1

27 000 914 23 11 washer plain 23x36x7 St-H 1

28 9 208 156 186 hexagon nut ISO 8675 DIN 439-BM20x1,5-05A2 1

29 9 210 311 186 hexagon nut ISO 8673 DIN 934-M20x1,5-8A2C 1

30 9 495 040 030 link pin rivet A-9,51x71,2 2

31 9 495 104 049 chain leaf WN 17514 25.4X6X49-KS 1 2875 HH

9 495 104 051 chain leaf WN 17514 25.4X6X51-KS 1 3065 HH

9 495 104 053 chain leaf WN 17514 25.4X6X53-KS 1 3265 HH

9 495 104 055 chain leaf WN 17514 25.4X6X55-KS 1 3365 HH

DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/12 /02 print no.1313 804 90 01 28.10.2009

08

Page 421: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

9 495 104 055 chain leaf WN 17514 25.4X6X55-KS 1 3465 HH

9 495 104 059 chain leaf WN 17514 25.4X6X59-KS 1 3765 HH

9 495 104 061 chain leaf WN 17514 25.4X6X61-KS 1 3965 HH

32 164 446 55 09 support chain 1

33 1510 448 34 36 ***** 1 2875 HH

1510 448 34 37 ***** 1 3065 HH

1510 448 34 38 ***** 1 3265 HH

1510 448 34 39 ***** 1 3365 HH

1510 448 34 40 ***** 1 3465 HH

1510 448 34 41 ***** 1 3765 HH

1510 448 34 42 ***** 1 3965 HH

34 1510 448 34 43 ***** 1 2875 HH

1510 448 34 44 ***** 1 3065 HH

1510 448 34 45 ***** 1 3265 HH

1510 448 34 46 ***** 1 3365 HH

1510 448 34 47 ***** 1 3465 HH

1510 448 34 48 ***** 1 3765 HH

1510 448 34 49 ***** 1 3965 HH

35 188 446 63 04 connector 2 2875 HH only , loctite 243

183 446 63 27 connecting piece 2 3065HH, 3265 HH, 3365 HH, 3465 HH,3765 HH, 3965 HH , loctite 243

36 000 944 23 29 valve safety 2

37 9 289 600 227 shim DIN 988 17X24X0.5-H a.req.

38 000 955 01 04 clip DIN 1596 19 bk 2

39 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

40 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

41 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/12 /03

08

Page 422: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

42 9 045 341 180 screw ISO 4762 M8x20-10.9 1

43 9 380 620 322 spring dowel sleeve ISO 8752 6x36-ST 2

44 9 133 339 172 screw grub DIN 913 M8X8-22H 4 loctite 243

45 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

46 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

47 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

48 000 924 96 02 bearing spherical E45-2RS 2

49 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

50 9 045 316 535 socket head screw ISO 4762 M20x90-8.8-A2C 4

DUPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/12 /04 print no.1313 804 90 01 28.10.2009

08

Page 423: H25CT Manual+Linde
Page 424: H25CT Manual+Linde

TRIPLEX MAST SERIES 1510

13138030804.tif

08/13 /00 print no.1313 804 90 01 28.10.2009

08

Page 425: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 1510 410 20 00 lift mast outer assy. 2875/4275HH 1 4275 HH

1510 410 20 01 lift mast outer assy. 3065/4555HH 1 4555 HH

1510 410 20 02 lift mast outer assy. 4705HH 1 4705 HH

1510 410 20 03 lift mast outer assy. 3265/4855HH 1 4855 HH

1510 410 20 04 lift mast outer assy. 3365/5005HH 1 5005 HH

1510 410 20 05 lift mast outer assy. 3465/5155HH 1 5155 HH

1510 410 20 06 lift mast outer assy. 3765/5505HH 1 5505 HH

1510 410 20 07 lift mast outer assy. 3965/5805HH 1 5805 HH

1510 410 20 08 lift mast outer assy. 5955HH 1 5955 HH

2 1510 410 36 00 lift mast central assy. 4275HH 1 4275 HH

1510 410 36 01 lift mast central assy. 4555HH 1 4555 HH

1510 410 36 02 lift mast central assy. 4705HH 1 4705 HH

1510 410 36 03 lift mast central assy. 4855HH 1 4855 HH

1510 410 36 04 lift mast central assy. 5005HH 1 5005 HH

1510 410 36 05 lift mast central assy. 5155HH 1 5155 HH

1510 410 36 06 lift mast central assy. 5505HH 1 5505 HH

1510 410 36 07 lift mast central assy. 5805HH 1 5805 HH

1510 410 36 08 lift mast central assy. 5955HH 1 5955 HH

3 188 410 33 28 lift mast inner assy. 4275HH 1 4275 HH

188 410 33 29 lift mast inner assy. 4555HH 1 4555 HH

188 410 33 00 lift mast inner assy. 4655/4705 1 4705 HH

188 410 33 01 lift mast inner assy. 4805/4855 1 4855 HH

188 410 33 02 lift mast inner assy. 4955/5005 1 5005 HH

TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/13 /01

08

Page 426: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

188 410 33 03 lift mast inner assy. 5105/5155 1 5155 HH

188 410 33 05 lift mast inner assy. 5505 1 5505 HH

188 410 33 07 lift mast inner assy. 5805 1 5805 HH

188 410 33 08 lift mast inner assy. 5955 1 5955 HH

4 000 924 94 75 support roller 8

000 924 94 76 support roller 90,2 mm 8

000 924 94 77 support roller 90,5 mm 8

5 9 289 600 582 washer shim DIN 988 40X50X0.3 4

9 289 600 583 washer support DIN 988 40x50x0,5 4

9 289 600 586 washer support DIN 988 40X50X1 4

6 186 446 09 57 guide 2

7 9 455 622 167 retaining ring DIN 471 16X1 a.req.

8 000 955 22 78 clip 48x2x40 4

9 9 048 350 180 screw cap hd M8x20-10.9-MK 10x5 4

10 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 4

11 000 931 30 58 bracket 1

12 9 008 311 180 hexagon head screw ISO 4017 M8x20-8.8-A2C 2

13 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 2

14 183 440 21 01 pipe assy. 1

15 9 045 316 195 socket-head screw ISO 4762 M8x50-8.8-A2C 3

16 000 944 23 50 valve safety 1

17 000 963 23 01 o-ring 30,2x3-V80 1

18 183 446 45 02 fork clevis 1 loctite 243

19 000 993 36 70 chain pulley 1

20 000 912 21 02 pin 45X120 1

21 000 924 85 27 bearing thrust washer DIN 5405 45x65x1 2

22 183 446 24 00 angle 1

TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/13 /02 print no.1313 804 90 01 28.10.2009

08

Page 427: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

23 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

24 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

25 000 962 01 00 plug WN 17253 8.8X9.5 1

26 186 446 55 01 anchor, chain 1

27 000 914 23 11 washer plain 23x36x7 St-H 1

28 9 208 156 186 hexagon nut ISO 8675 DIN 439-BM20x1,5-05A2 1

29 9 210 311 186 hexagon nut ISO 8673 DIN 934-M20x1,5-8A2C 1

30 9 495 040 030 link pin rivet A-9,51x71,2 2

31 9 495 104 049 chain leaf WN 17514 25.4X6X49-KS 2 4275 HH

9 495 104 051 chain leaf WN 17514 25.4X6X51-KS 2 4555 HH

9 495 104 053 chain leaf WN 17514 25.4X6X53-KS 2 4705 HH , 4855 HH

9 495 104 055 chain leaf WN 17514 25.4X6X55-KS 2 5005 HH , 5155 HH

9 495 104 059 chain leaf WN 17514 25.4X6X59-KS 2 5505 HH

9 495 104 061 chain leaf WN 17514 25.4X6X61-KS 2 5805 HH , 5955 HH

32 164 446 55 09 support chain 1

33 1510 448 34 00 pipe line 1 4275 HH

1510 448 34 01 pipe line 1 4555 HH

1510 448 34 02 pipe line 1 4705 HH

1510 448 34 03 pipe line 1 4855 HH

1510 448 34 04 pipe line 1 5005 HH

1510 448 34 05 pipe line 1 5155 HH

1510 448 34 06 pipe line 1 5505 HH

1510 448 34 07 pipe line 1 5805 HH

1510 448 34 08 pipe line 1 5955 HH

34 1510 448 34 09 pipe line 1 4275 HH

1510 448 34 10 pipe line 1 4555 HH

1510 448 34 11 pipe line 1 4705 HH

TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/13 /03

08

Page 428: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1510 448 34 12 pipe line 1 4855 HH

1510 448 34 13 pipe line 1 5005 HH

1510 448 34 14 pipe line 1 5155 HH

1510 448 34 15 pipe line 1 5505 HH

1510 448 34 16 pipe line 1 5805 HH

1510 448 34 17 pipe line 1 5955 HH

35 1510 448 34 59 pipe line 1 4275 HH

1510 448 34 60 pipe line 1 4555 HH

1510 448 34 61 pipe line 1 4705 HH

1510 448 34 62 pipe line 1 4855 HH

1510 448 34 63 pipe line 1 5005 HH

1510 448 34 64 pipe line 1 5155 HH

1510 448 34 65 pipe line 1 5505 HH

1510 448 34 66 pipe line 1 5805 HH

1510 448 34 26 ***** 1 5955 HH

36 1510 448 34 50 pipe line 1 4275 HH

1510 448 34 51 pipe line 1 4555 HH

1510 448 34 52 pipe line 1 4705 HH

1510 448 34 53 pipe line 1 4855 HH

1510 448 34 54 pipe line 1 5005 HH

1510 448 34 55 pipe line 1 5155 HH

1510 448 34 56 pipe line 1 5505 HH

1510 448 34 57 pipe line 1 5805 HH

1510 448 34 35 ***** 1 5955 HH

37 183 446 63 16 piece connecting 4 4275 HH , loctite 243

188 446 63 00 connector 4 4555 HH , 4705 HH , 4855 HH , 5005 HH ,5155 HH loctite 243

TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/13 /04 print no.1313 804 90 01 28.10.2009

08

Page 429: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

188 446 63 01 connector 4 5505 HH , 5805 HH , 5955 HH , loctite 243

38 000 944 23 29 valve safety 4

39 9 289 600 227 shim DIN 988 17X24X0.5-H a.req.

40 186 446 25 07 support 4

41 9 027 316 188 bolt coach DIN 603 M8X35-8.8A2C 2

42 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

43 9 210 281 110 nut ISO 4032 934-M8-8A2C 2

44 000 955 01 04 clip DIN 1596 19 bk 2 complete

45 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 2

46 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2

47 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 1

48 9 309 412 018 washer DIN 7349 DIN 7349-8.4x21x4,8A2C 1

49 9 380 620 322 spring dowel sleeve ISO 8752 6x36-ST 4

50 9 133 339 172 screw grub DIN 913 M8X8-22H 6 loctite 243

51 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

52 1510 441 12 01 junction 1

53 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 1

54 9 008 311 177 hexagon head screw ISO 4017 M8x16-8.8-A2C 1

55 000 914 16 34 washer 2

56 000 924 96 02 bearing spherical E45-2RS 2

57 9 045 316 535 socket head screw ISO 4762 M20x90-8.8-A2C 4

58 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

59 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

TRIPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/13 /05

08

Page 430: H25CT Manual+Linde
Page 431: H25CT Manual+Linde
Page 432: H25CT Manual+Linde

LIFT CYLINDER FOR SIMPLEX MAST SERIES 1510

13138030823.tif

08/14 /00 print no.1313 804 90 01 28.10.2009

08

Page 433: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 5172 440 79 43 lift cylinder assy. 1552 mm 2 2850 HH

5172 440 79 44 lift cylinder assy. 1652 mm 2 3050 HH

5172 470 00 03 lift cylinder assy. 1702 mm 2 3150 HH

5172 470 00 04 lift cylinder assy. 1802 mm 2 3350 HH

5172 440 79 45 lift cylinder assy. 1852 mm 2 3450 HH

5172 470 00 05 lift cylinder assy. 1902 mm 2 3550 HH

5172 440 79 46 lift cylinder assy. 2002 mm 2 3750 HH

5172 440 79 47 lift cylinder assy. 2152 mm 2 4050 HH

5172 440 79 48 lift cylinder assy. 2402 mm 2 4550 HH

5172 440 79 49 lift cylinder assy. 2752 mm 2 5250 HH

2 5172 470 10 20 ***** 1

3 000 963 26 07 ***** 1

4 000 962 20 13 seal ring grooved 52x62x7,3 1

5 000 962 26 57 ***** 1

6 000 901 30 40 ***** 1

7 9 636 801 037 seal ring DIN 7603 A6X10-Cu 1

8 ---------- 4 not available individually

9 ---------- 4 not available individually

10 000 944 24 15 throttle valve 1

11 186 446 93 03 covering, rubber 1

12 000 907 01 20 ***** 1

13 000 915 90 14 ring 1

14 000 955 05 24 clip 1 4550 HH and 5250 HH only

LIFT CYLINDER FOR SIMPLEX MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/14 /01

08

Page 434: H25CT Manual+Linde
Page 435: H25CT Manual+Linde
Page 436: H25CT Manual+Linde

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST SERIES 1510

13138030819.tif

08/15 /00 print no.1313 804 90 01 28.10.2009

08

Page 437: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

Quanities after stroke apply to triple mast

1 5178 440 53 22 lift cylinder assy. 1530 mm 1/2 2875 HH Duplex , 4275 HH Triplex

5178 440 53 23 lift cylinder assy. 1620 mm 1/2 3065 HH Duplex , 4555 HH Triplex

5178 440 53 24 lift cylinder assy. 1670 mm 1/2 4705 HH

5178 440 53 25 lift cylinder assy. 1720 mm 1/2 3265 HH Duplex , 4855 HH Triplex

5178 440 53 26 lift cylinder assy. 1770 mm 1/2 3365 HH Duplex , 5005 HH Triplex

5178 440 53 27 lift cylinder assy. 1820 mm 1/2 3465 HH Duplex , 5155 HH Triplex

5178 440 53 28 lift cylinder assy. 1920 mm 1/2 5505 HH

5178 440 53 43 lift cylinder assy. 1970 mm 1/2 3765 HH

5178 440 53 29 lift cylinder assy. 2020 mm 1/2 3965 HH Duplex , 5805 HH Triplex

5178 440 53 30 lift cylinder assy. 2070 mm 1/2 5955 HH

2 5172 440 79 13 lift cylinder assy. 1530 mm 1 2875 HH Duplex , 4275 HH Triplex

5172 440 79 14 lift cylinder assy. 1620 mm 1 3065 HH Duplex , 4555 HH Triplex

5172 440 79 15 lift cylinder assy. 1670 mm 1 4705 HH

5172 440 79 16 lift cylinder assy. 1720 mm 1 3265 HH Duplex , 4855 HH Triplex

5172 440 79 17 lift cylinder assy. 1770 mm 1 3365 HH Duplex , 5005 HH Triplex

5172 440 79 18 lift cylinder assy. 1820 mm 1 3465 HH Duplex , 5155 HH Triplex

5172 440 79 19 lift cylinder assy. 1920 mm 1 5505 HH

5172 440 79 33 lift cylinder assy. 1970 mm 1 3765 HH

5172 440 79 20 lift cylinder assy. 2020 mm 1 3965 HH Duplex , 5805 HH Triplex

5172 440 79 21 lift cylinder assy. 2070 mm 1 5955 HH

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/15 /01

08

Page 438: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

3 5176 440 52 63 lift cylinder assy. 1530 mm 1 4275 HH

5176 440 52 64 lift cylinder assy. 1620 mm 1 4555 HH

5176 440 52 65 lift cylinder assy. 1670 mm 1 4705 HH

5176 440 52 66 lift cylinder assy. 1720 mm 1 4855 HH

5176 440 52 67 lift cylinder assy. 1770 mm 1 5005 HH

5176 440 52 68 lift cylinder assy. 1820 mm 1 5155 HH

5176 440 52 69 lift cylinder assy. 1920 mm 1 5505 HH

5176 440 52 70 lift cylinder assy. 2020 mm 1 5805 HH

5176 440 52 71 lift cylinder assy. 2070 mm 1 5955 HH

4 000 944 24 15 throttle valve 1

5 185 446 11 00 piston 1

6 185 446 12 00 cover piston 1

7 000 907 50 12 snap ring 24x1,2 1

8 000 914 75 29 washer 1

9 000 921 90 39 spring 1

10 000 914 75 34 washer 1

11 000 955 22 78 clip 48x2x40 1

12 5171 470 10 05 ***** 1 complete

13 000 963 24 33 o-ring 44,2x2,5-NBR70 1

14 000 962 19 80 grooved ring 37-47-7,3 1

15 000 962 26 55 wiper 37x45x4/7 1

16 000 901 30 40 ***** 1

17 9 636 801 037 seal ring DIN 7603 A6X10-Cu 1

18 000 907 01 14 ring snap 1

19 000 915 90 16 ring 1

20 188 446 12 01 cover piston 1

21 5176 345 03 01 ***** 1

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/15 /02 print no.1313 804 90 01 28.10.2009

08

Page 439: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

22 000 903 75 41 ***** 1

23 000 962 36 12 seal piston 30x41x4,2 1

24 000 962 33 36 band rotating driving 41x5,6x2,5 1

25 ---------- 4 not available individually

26 ---------- 4 not available individually

EXTERNAL CYLINDER FOR DUPLEX / TRIPLEX LIFT MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/15 /03

08

Page 440: H25CT Manual+Linde
Page 441: H25CT Manual+Linde
Page 442: H25CT Manual+Linde

MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT SERIES 1510

13138190811.tif

08/16 /00 print no.1313 804 90 01 28.10.2009

08

Page 443: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

See mast identification page 08/01 00

HH = lift height (mm)

1 186 440 17 27 lift cylinder assy. 836 mm 1 2875 HH

186 440 17 29 lift cylinder assy. 886 mm 1 4275 HH

186 440 17 31 lift cylinder assy. 936 mm 1 3065 HH Duplex , 4555 HH Triplex

186 440 17 32 lift cylinder assy. 961 mm 1 4705 HH

186 440 17 33 lift cylinder assy. 986 mm 1 3265 HH Duplex , 4855 HH Triplex

186 440 17 34 lift cylinder assy. 1011 mm 1 3365 HH Duplex , 5005 HH Triplex

186 440 17 35 lift cylinder assy. 1036 mm 1 3465 HH Duplex , 5155 HH Triplex

186 440 17 38 lift cylinder assy. 1111 mm 1 3765 HH Duplex , 5505 HH Triplex

186 440 17 40 lift cylinder assy. 1161 mm 1 3965 HH Duplex , 5805 HH Triplex

186 440 17 41 lift cylinder assy. 1186 mm 1 5955 HH

2 ---------- 4 1 not available individually

3 ---------- 4 1 not available individually

4 186 446 09 97 guide 1

5 186 446 12 12 cover piston 1

6 000 963 06 09 o ring 60x3,5-V80 1

7 000 962 36 26 seal 1

8 000 962 33 37 band roataing driving 84x5,5x2,5 1

9 186 446 41 09 cylinder head 1

10 000 962 29 08 ring sealing 94x89,5x3,8 1

11 000 962 19 84 seal ring grooved 77x87x7,3 1

12 000 962 25 97 seal wiper 77x87x6,3/9 1

13 002 903 02 00 hexagon head screw DIN 933 M6x6-8.8-A2A 1

14 9 636 801 037 seal ring DIN 7603 A6X10-Cu 1

MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/16 /01

08

Page 444: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

15 000 960 81 22 set of seals 1 items 6-8 and 10-12

MIDDLE CYLINDER FOR DUPLEX / TRIPLEX MAST LIFT SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/16 /02 print no.1313 804 90 01 28.10.2009

08

Page 445: H25CT Manual+Linde
Page 446: H25CT Manual+Linde

FORK CARRIAGE SERIES 1510 MAST

13138030799.tif

08/17 /00 print no.1313 804 90 01 28.10.2009

08

Page 447: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1510 440 91 00 fork carriage assy. 1 simple , double mast , class 2

1 1510 440 91 02 fork carriage assy. 1 simple , double mast , class 3

1a 1510 440 91 01 fork carriage assy. 1 triple , class 2

1a 1510 440 91 03 fork carriage assy. 1 triple , class 3

2 183 446 14 01 stop 1 simple only , loctite 243

2a 183 446 14 12 stop 1 duplex and triplex

3 9 045 355 298 screw cap hd ISO 4762 M12x30-10.9-MK 1 loctite 243

4 9 381 660 478 cylindrical pin ISO 8734 12m6x50-A-St 2 Loctite nr. 270

5 000 964 45 25 joiner (groove) 2

6 000 903 02 04 screw plug M12 2 Loctite nr. 243

7 000 924 94 75 support roller 6

000 924 94 76 support roller 90,2 mm 6

000 924 94 77 support roller 90,5 mm 6

8 9 289 600 582 washer shim DIN 988 40X50X0.3 a.req.

9 289 600 583 washer support DIN 988 40x50x0,5 a.req.

9 289 600 586 washer support DIN 988 40X50X1 a.req.

9 9 007 311 308 hexagon head bolt ISO 4014 M12x60-8.8-A2C 2

10 9 210 281 140 hexagon nut ISO 4032 DIN 934-M12-8A2C 2

11 9 309 412 022 washer DIN 7349 DIN 7349-13x30x6-A2C 4

FORK CARRIAGE SERIES 1510 MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/17 /01

08

Page 448: H25CT Manual+Linde
Page 449: H25CT Manual+Linde
Page 450: H25CT Manual+Linde

INTEGRAL SIDESHIFTER MAST SERIES 1510

13138030809.tif

08/18 /00 print no.1313 804 90 01 28.10.2009

08

Page 451: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1510 440 98 02 sideshift assy. std/dup 5500lb 980mm 1 Simplex/Duplex lift mast , (items 1-12)

1510 440 98 00 sideshift assy. std/dup 6500lb 980mm 1 Simplex/Duplex lift mast ,(items 1-12) class 3

1510 440 98 03 sideshift assy. triplex 5500lb 980mm 1 Triplex mast , (items 1-12)

1510 440 98 01 sideshift assy. triplex 6500 lb 980mm 1 Triplex mast , (items 1-12) , class 3

1 1508 440 91 05 ***** 1

1510 440 91 04 ***** 1 class 3

2 1508 441 07 01 ***** 1

3 1508 441 36 00 ***** 1

1510 440 71 00 ***** 1 class 3

4 1508 446 10 01 ***** 2

5 1510 440 63 02 ***** 1 Simplex/Duplex lift mast

1510 440 63 04 ***** 1 Simplex/Duplex lift mast , class 3

5a 1510 440 63 03 ***** 1 triplex

1510 440 63 05 ***** 1 triplex , class 3

6 1508 446 56 00 ***** 2 class 3

1510 446 56 00 ***** 2 class 3

7 1508 446 56 01 ***** 2

1510 446 56 01 ***** 2

8 1508 446 10 02 ***** 2

9 1508 446 37 00 ***** 2

10 1508 446 27 00 ***** a.req.

11 1508 446 25 04 ***** 2

12 1508 440 68 00 ***** 2

13 000 952 31 04 screw joint 10L9/16UNFCF 1

14 000 924 94 75 support roller a.req.

000 924 94 76 support roller 90,2 mm a.req.

INTEGRAL SIDESHIFTER MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/18 /01

08

Page 452: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

000 924 94 77 support roller 90,5 mm a.req.

15 9 289 600 582 washer shim DIN 988 40X50X0.3 a.req.

9 289 600 583 washer support DIN 988 40x50x0,5 a.req.

9 289 600 586 washer support DIN 988 40X50X1 a.req.

16 000 903 02 04 screw plug M12 2 top rollers only , loctite 243

17 000 964 45 25 joiner (groove) 2

18 183 446 14 01 stop 1 Simplex

183 446 14 12 stop 1 Duplex / Triplex lift mast

19 9 381 660 478 cylindrical pin ISO 8734 12m6x50-A-St 2 loctite 270

20 9 045 355 298 screw cap hd ISO 4762 M12x30-10.9-MK 1 loctite 243

21 1510 448 41 04 pipe 1 Simplex mast only

1510 448 41 02 pipe 1 Simplex mast only , class 3

22 1510 448 41 05 pipe 1 Simplex mast only

1510 448 41 03 pipe 1 Simplex mast only , class 3

23 9 758 003 091 clip DIN 1592 9x9 bk A2C 2 Simplex mast only

24 9 292 003 018 washer ISO 7089 A8,4-ST50-A2C 2 Simplex mast only

25 9 045 311 180 socket-head screw ISO 4762 M8x20-8.8-A2C 2 Simplex mast only

INTEGRAL SIDESHIFTER MAST SERIES 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/18 /02 print no.1313 804 90 01 28.10.2009

08

Page 453: H25CT Manual+Linde
Page 454: H25CT Manual+Linde

HANG-ON SIDESHIFTER 1510

13138030812.tif

08/19 /00 print no.1313 804 90 01 28.10.2009

08

Page 455: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 347 440 91 23 HOSS, CL2, 38.5"-W, CASC-55F 1 class 2

393 440 99 05 ATTACH,HOSS,CL3,38.5"-W,CASC-65F 1 class 3

2 000 952 31 04 screw joint 10L9/16UNFCF 2

HANG-ON SIDESHIFTER 1510

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/19 /01

08

Page 456: H25CT Manual+Linde
Page 457: H25CT Manual+Linde
Page 458: H25CT Manual+Linde

QUADRUPLE MAST 45DV MQ AND 55DV MQ

13138030850.tif

08/20 /00 print no.1313 804 90 01 28.10.2009

08

Page 459: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 924 93 46 support roller 10

2 000 914 82 20 washer a.req.

3 1313 445 05 00 ***** 2 45DV MQ

1313 445 05 03 ***** 2 55DV MQ

4 346 445 05 00 chain anchor 4

5 000 924 93 51 ***** 2

6 000 964 67 01 levelling piece 6

7 000 918 46 38 ***** 2

8 000 904 60 96 ***** 4

9 000 904 60 97 ***** 4

10 002 908 32 19 pin split 10

11 000 912 95 26 bolt 6

12 002 908 32 18 pin split 20

13 000 904 60 81 nut 5/8-18UNF 6

14 002 905 90 37 nut 6

15 000 908 32 00 ***** 4

16 1313 445 05 01 ***** 2

17 000 910 04 45 ***** 1

18 000 955 24 04 ***** 1

19 000 924 93 52 ***** 2 45DV MQ

000 926 42 21 ***** 2 55DV MQ

20 1313 446 45 00 ***** 1

21 000 907 50 40 lock ring 1

22 000 926 42 22 ***** 2

23 000 907 50 41 lock ring 2

24 000 907 09 21 lock washer 3

25 000 901 16 27 hexagon head screw M10x16 2

QUADRUPLE MAST 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/20 /01

08

Page 460: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

26 000 926 42 20 ***** 1

27 346 446 14 00 stop 1

28 000 908 01 08 spring-type straight pin 1

29 000 901 00 08 socket head screw M12x35 4

30 346 446 25 00 suport 2

31 000 901 52 59 hexagon head screw 4

32 000 912 95 27 bolt 1

33 000 907 50 44 ***** 2

34 000 907 50 45 ***** 1

35 000 914 82 23 bush 1

36 000 914 82 40 ***** 1

37 000 914 82 41 ***** 1

38 346 448 14 01 ***** 1

39 000 951 21 63 ***** 1

40 1313 445 05 02 ***** 2 45DV MQ

1313 445 05 04 ***** 2 55DV MQ

41 000 952 75 38 ***** 1

42 000 901 52 57 hexagon head screw 2

43 000 914 82 35 ***** a.req.

44 000 914 82 36 ***** a.req.

45 000 914 82 37 ***** a.req.

46 000 914 82 38 ***** a.req.

47 000 914 82 39 ***** a.req.

48 1313 440 14 00 ***** 1

49 000 955 25 25 ***** 1

50 000 901 50 11 socket head screw 4

51 000 918 46 37 compression spring 4

QUADRUPLE MAST 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/20 /02 print no.1313 804 90 01 28.10.2009

08

Page 461: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

52 000 901 91 06 ***** 1

53 000 926 42 14 roller 2

54 000 940 13 07 ***** 1

55 000 951 21 56 pipe union 1

56 1313 440 14 01 ***** 1

57 000 914 08 95 washer 1

58 000 907 09 24 lock ring 1

59 000 901 90 86 screw 2

60 000 952 75 34 elbow union 2

61 000 951 21 55 pipe union 1

62 000 901 16 28 hexagon head screw M10x25 1

63 000 901 50 12 socket head screw 2

64 346 446 25 01 suport 1

65 000 901 16 56 ***** 2

66 000 901 16 28 hexagon head screw M10x25 1

67 000 951 04 16 ***** 1

68 000 914 10 76 ***** 1

69 000 907 09 21 lock washer 7

70 000 951 90 44 ***** 1

71 1313 440 48 00 ***** 1

72 1313 440 14 02 ***** 1

73 346 440 57 00 manifold 1

74 346 448 31 18 ***** 1

75 1313 410 40 00 ***** 1 lift height 240 inch , 45DV MQ

1313 440 40 01 ***** 1 lift height 258 inch , 45DV MQ

1313 440 40 02 ***** 1 lift height 276 inch , 45DV MQ

1313 440 40 03 ***** 1 lift height 245 inch , 55DV MQ

QUADRUPLE MAST 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/20 /03

08

Page 462: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1313 440 40 04 ***** 1 lift height 260 inch , 55DV MQ

1313 440 40 05 ***** 1 lift height 275 inch , 55DV MQ

76 1313 440 41 06 ***** 1 lift height 240 inch , 45DV MQ

1313 440 41 07 ***** 1 lift height 258 inch , 45DV MQ

1313 440 41 08 ***** 1 lift height 276 inch , 45DV MQ

1313 410 40 07 ***** 1 lift height 245 inch , 55DV MQ

1313 410 40 08 ***** 1 lift height 260 inch , 55DV MQ

1313 410 40 09 ***** 1 lift height 275 inch , 55DV MQ

77 1313 440 40 10 ***** 1 lift height 240 inch , 45DV MQ

1313 440 40 11 ***** 1 lift height 258 inch , 45DV MQ

1313 440 40 12 ***** 1 lift height 276 inch , 45DV MQ

1313 410 40 11 ***** 1 lift height 245 inch , 55DV MQ

1313 410 40 12 ***** 1 lift height 260 inch , 55DV MQ

1313 410 40 13 ***** 1 lift height 275 inch , 55DV MQ

78 1313 440 40 14 ***** 1 lift height 240 inch , 45DV MQ

1313 440 40 15 ***** 1 lift height 258 inch , 45DV MQ

1313 440 40 16 ***** 1 lift height 276 inch , 45DV MQ

1313 410 40 15 ***** 1 lift height 245 inch , 55DV MQ

1313 410 40 16 ***** 1 lift height 260 inch , 55DV MQ

1313 410 40 17 ***** 1 lift height 275 inch , 55DV MQ

79 1313 470 41 04 ***** 1 lift height 240 inch , 45DV MQ

1313 470 41 05 ***** 1 lift height 258 inch , 45DV MQ

1313 470 41 06 ***** 1 lift height 276 inch , 45DV MQ

1313 470 41 07 ***** 1 lift height 245 inch , 55DV MQ

1313 470 41 08 ***** 1 lift height 260 inch , 55DV MQ

1313 470 41 09 ***** 1 lift height 275 inch , 55DV MQ

80 1313 470 41 10 ***** 1 lift height 240 inch , 45DV MQ

QUADRUPLE MAST 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/20 /04 print no.1313 804 90 01 28.10.2009

08

Page 463: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1313 470 41 11 ***** 1 lift height 258 inch , 45DV MQ

1313 440 41 12 ***** 1 lift height 276 inch , 45DV MQ

1313 470 41 11 ***** 1 lift height 245 inch , 55DV MQ

1313 470 41 12 ***** 1 lift height 260 inch , 55DV MQ

1313 470 41 13 ***** 1 lift height 275 inch , 55DV MQ

81 1313 470 41 00 ***** 1 lift height 240 inch , 45DV MQ

1313 470 41 01 ***** 1 lift height 258 inch , 45DV MQ

1313 470 41 02 ***** 1 lift height 276 inch , 45DV MQ

1313 470 41 01 ***** 1 lift height 245 inch , 55DV MQ

1313 470 41 02 ***** 1 lift height 260 inch , 55DV MQ

1313 470 41 03 ***** 1 lift height 275 inch , 55DV MQ

82 1313 470 36 01 ***** 1 lift height 240 inch , 45DV MQ

1313 470 36 02 ***** 1 lift height 258 inch , 45DV MQ

1313 470 36 03 ***** 1 lift height 276 inch , 45DV MQ

1313 470 36 02 ***** 1 lift height 245 inch , 55DV MQ

1313 470 36 03 ***** 1 lift height 260 inch , 55DV MQ

1313 470 36 04 ***** 1 lift height 275 inch , 55DV MQ

83 9 007 316 535 hexagon head bolt ISO 4014 M20x90-8.8-A2C 4

84 9 291 003 033 washer ISO 7090 B21-ST50-A2C 4

85 9 607 021 080 lubricating nipple (cone) DIN 71412 AM8x1 2

86 000 924 96 02 bearing spherical E45-2RS 2

QUADRUPLE MAST 45DV MQ AND 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/20 /05

08

Page 464: H25CT Manual+Linde
Page 465: H25CT Manual+Linde
Page 466: H25CT Manual+Linde

LEFT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST

3468030827.tif

08/21 /00 print no.1313 804 90 01 28.10.2009

08

Page 467: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 440 17 10 ***** 1 45DV MQ , lift height 240 inch

1313 440 17 11 ***** 1 45DV MQ , lift height 258 inch

1313 440 17 12 ***** 1 45DV MQ , lift height 276 inch

1313 440 17 13 ***** 1 55DV MQ , lift height 245 inch

1313 440 17 14 ***** 1 55DV MQ , lift height 260 inch

1313 440 17 15 ***** 1 55DV MQ , lift height 275 inch

2 1313 446 41 01 ***** 1

3 000 907 50 45 ***** 1

4 000 940 13 06 non-return valve 1

5 000 940 13 07 ***** 1

6 000 962 92 23 ***** 1

LEFT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/21 /01

08

Page 468: H25CT Manual+Linde
Page 469: H25CT Manual+Linde
Page 470: H25CT Manual+Linde

RIGHT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST

3468030826.tif

08/22 /00 print no.1313 804 90 01 28.10.2009

08

Page 471: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 440 17 04 ***** 1 45DV MQ , lift height 240 inch

1313 440 17 05 ***** 1 45DV MQ , lift height 258 inch

1313 440 17 06 ***** 1 45DV MQ , lift height 276 inch

1313 440 17 07 ***** 1 55DV MQ , lift height 245 inch

1313 440 17 08 ***** 1 55DV MQ , lift height 260 inch

1313 440 17 09 ***** 1 55DV MQ , lift height 275 inch

2 1313 446 41 01 ***** 1

3 000 944 17 76 flow control valve 1

4 000 951 21 63 ***** 1

5 000 951 21 56 pipe union 1

6 000 962 92 22 ***** 1

RIGHT HAND LIFT CYLINDER 45DV MQ and 55DV MQ QUAD MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/22 /01

08

Page 472: H25CT Manual+Linde
Page 473: H25CT Manual+Linde
Page 474: H25CT Manual+Linde

FREE LIFT CYLINDER 45DV MQ and 55DV MQ

3468030825a.tif

08/23 /00 print no.1313 804 90 01 28.10.2009

08

Page 475: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 1313 440 17 00 ***** 1 45DV MQ , lift height 240 inch

1313 440 17 01 ***** 1 45DV MQ , lift height 258 inch

1313 440 17 02 ***** 1 45DV MQ , lift height 276 inch

1313 440 17 01 ***** 1 55DV MQ , lift height 245 inch

1313 440 17 02 ***** 1 55DV MQ , lift height 260 inch

1313 440 17 03 ***** 1 55DV MQ , lift height 275 inch

2 1313 446 41 00 ***** 1

3 000 962 92 21 ***** 1

4 000 940 13 06 non-return valve 1

5 346 446 11 00 stop 1

6 000 952 75 38 ***** 1

7 000 921 93 22 ***** 1

8 000 916 96 40 bush 1

9 000 908 01 09 bolt assy. 1

FREE LIFT CYLINDER 45DV MQ and 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/23 /01

08

Page 476: H25CT Manual+Linde
Page 477: H25CT Manual+Linde
Page 478: H25CT Manual+Linde

FORK CARRIAGE FOR QUAD MAST 45DV MQ and 55DV MQ

3468030851.tif

08/24 /00 print no.1313 804 90 01 28.10.2009

08

Page 479: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 901 52 58 hexagon head screw 4

2 000 907 09 20 lock washer 4

3 000 924 93 48 ***** 4

4 002 908 32 19 pin split 2

5 002 905 90 37 nut 2

6 000 904 60 81 nut 5/8-18UNF 2

7 1313 445 05 01 ***** 2

8 002 908 32 18 pin split 4

9 000 912 95 26 bolt 2

10 000 914 82 20 washer a.req.

11 000 924 93 46 support roller 4

12 000 924 93 50 ***** 2

13 000 901 52 59 hexagon head screw 4

14 346 445 34 00 bolt 2

15 346 446 14 02 retainer plate 1

16 - 1

FORK CARRIAGE FOR QUAD MAST 45DV MQ and 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/24 /01

08

Page 480: H25CT Manual+Linde
Page 481: H25CT Manual+Linde
Page 482: H25CT Manual+Linde

INTERGRAL SIDSHIFTER QUAD MAST 45DV MQ, 55DV MQ

3468030811.tif

08/25 /00 print no.1313 804 90 01 28.10.2009

08

Page 483: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 962 92 14 set of seals a.req.

2 000 901 00 07 socket head screw M12x65 6

3 346 440 66 02 ***** 2

4 346 446 41 01 fork clevis 2

5 000 951 94 04 grease nipple 3

6 000 951 94 05 elbow union 3

7 346 446 22 00 angle 2

8 346 446 10 00 piston 2

9 000 964 67 02 spirng element a.req.

10 - 1 not sold seperately

11 000 914 82 20 washer a.req.

12 000 924 93 46 support roller 4 top and bottom roller

12a 000 924 93 50 ***** 2 middle roller

13 346 446 56 00 hose line a.req.

14 346 446 24 02 ***** 1

15 000 952 75 33 elbow union 2

16 346 448 31 15 hose 2

17 000 951 21 57 threaded elbow pipe 2

18 000 901 90 88 screw 1

19 346 775 34 00 ***** 2

20 000 901 52 59 hexagon head screw 4

21 000 924 93 48 ***** 2

22 000 907 09 20 lock washer 2

23 000 901 52 58 hexagon head screw 2

24 1313 445 05 01 ***** 2

25 002 908 32 18 pin split 4

26 000 912 95 26 bolt 2

INTERGRAL SIDSHIFTER QUAD MAST 45DV MQ, 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/25 /01

08

Page 484: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

27 000 904 60 81 nut 5/8-18UNF 2

28 002 905 90 37 nut 2

29 002 908 32 19 pin split 2

INTERGRAL SIDSHIFTER QUAD MAST 45DV MQ, 55DV MQ

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

08/25 /02 print no.1313 804 90 01 28.10.2009

08

Page 485: H25CT Manual+Linde
Page 486: H25CT Manual+Linde

HANG-ON SIDESHIFTER QUAD MAST

13138030813.tif

08/26 /00 print no.1313 804 90 01 28.10.2009

08

Page 487: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 347 440 91 23 HOSS, CL2, 38.5"-W, CASC-55F 1 class 2

2 801 FTG,ADP,90°,9/16M-SAE,9/16M-JIC,w/O-RING 2

3 1313 440 36 00 hose line assy. sideshift 2

HANG-ON SIDESHIFTER QUAD MAST

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 08/26 /01

08

Page 488: H25CT Manual+Linde
Page 489: H25CT Manual+Linde

Register 09 : SPECIAL EQUIPMENT09/01 00 - 01 TERMINAL BOARD

H25/27/30/32

28.10.2009 print no.1313 804 90 01

09

Page 490: H25CT Manual+Linde
Page 491: H25CT Manual+Linde
Page 492: H25CT Manual+Linde

TERMINAL BOARD

13138030902.tif

09/01 /00 print no.1313 804 90 01 28.10.2009

09

Page 493: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 392 430 82 59 support assy. 1

2 1313 430 45 10 pipe assy. 1

3 000 955 16 06 clamp block DIN 3015 L-KP-2-R-18-PA 1

4 000 964 42 06 support 1

5 000 908 35 08 expanding rivet 4,8x8,5 2

6 9 307 003 014 washer ISO 7093 B6,4-ST-A2C 3

7 9 210 281 090 hexagon nut ISO 4032 DIN 934-M6-8A2C 1

8 9 576 930 409 star-shape handle DIN 6336 K40-M6-PA 1

9 000 962 01 06 pipe plug WN 17253 14,3x9,5 1

10 9 027 117 146 carriage bolt DIN 603 M6x65-4.6-A2B 1

TERMINAL BOARD

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 09/01 /01

09

Page 494: H25CT Manual+Linde
Page 495: H25CT Manual+Linde

Register 10 : MISCELLANEOUS10/011 00 - 01 SPECIAL TOOLS , TRUCK DIAGNOSTIC10/011 00 - 01 SPECIAL TOOLS10/01 00 - 01 BAG FOR TECHNICAL DOCUMENTATION10/02 00 - 03 PLATES

H25/27/30/32

28.10.2009 print no.1313 804 90 0110

Page 496: H25CT Manual+Linde
Page 497: H25CT Manual+Linde
Page 498: H25CT Manual+Linde

SPECIAL TOOLS , TRUCK DIAGNOSTIC

13131001000.tif

10/011 /00 print no.1313 804 90 01 28.10.2009

10

Page 499: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

- computer supplied by dealer

1 390 382 01 01 cable electric CAN BOXTO TRUCK 1

2 390 360 51 12 module electronic assy. CAN-Box 1

3 390 382 01 00 cable electric CANBOX TO PC 1

4 300 365 25 04 interface test cable 1 LP only

SPECIAL TOOLS , TRUCK DIAGNOSTIC

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 10/011 /01

10

Page 500: H25CT Manual+Linde
Page 501: H25CT Manual+Linde
Page 502: H25CT Manual+Linde

SPECIAL TOOLS

13131001001.tif

10/011 /00 print no.1313 804 90 01 28.10.2009

10

Page 503: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 7 9172 99 010 break out box (121 pin) 1

2 000 973 43 13 adaptor 1

3 000 941 60 00 tool kit 1

4 000 941 81 00 tool kit 1

5 XT10020 ***** 1

6 XT40001 ***** 1

7 1313 430 99 01 ***** 1

8 1313 430 99 02 ***** 1

9 1313 430 99 00 ***** 1

SPECIAL TOOLS

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 10/011 /01

10

Page 504: H25CT Manual+Linde
Page 505: H25CT Manual+Linde
Page 506: H25CT Manual+Linde

BAG FOR TECHNICAL DOCUMENTATION

13138031004.tif

10/01 /00 print no.1313 804 90 01 28.10.2009

10

Page 507: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 7 7244 00 000 bag for documents 1

2 9 008 610 069 1 hexagon head screw M4x16-ST-A3B 2

3 9 309 412 012 1 washer DIN 7349 DIN 7349-5,3-ST-A2A 2

BAG FOR TECHNICAL DOCUMENTATION

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 10/01 /01

10

Page 508: H25CT Manual+Linde
Page 509: H25CT Manual+Linde
Page 510: H25CT Manual+Linde

PLATES

13138031001.tif

10/02 /00 print no.1313 804 90 01 28.10.2009

10

Page 511: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

1 000 938 46 01 WARNING DECAL, NO STEP a.req.

000 938 46 15 DECAL, WARNING, NOT A STEP - SPANISH a.req.

000 938 46 41 DECAL, WARNING, NOT A STEP-FRENCH a.req.

2 000 938 46 03 DECAL, WARNING, CRUSHED FINGERS a.req.

000 938 46 18 DECAL,WARNING,CRUSHED FINGERS,SPANISH a.req.

000 938 46 34 DECAL, WARNING, CRUSHED FINGERS-FRENCH a.req.

3 000 938 46 02 DECAL,WARNING,TIP OVER,SIT-DOWN RIDER TK 1

000 938 46 21 DECAL,WARNING,TIPOVER,(Sit)RIDER,SPANISH 1

000 938 46 33 DECAL TIP OVER WARNING, SIT-DOWN-FRENCH 1

4 000 938 46 07 DECAL, BACK-UP ALARM 1

000 938 46 24 DECAL, BACK-UP ALARM SPANISH 1

000 938 46 37 DECAL, BACK-UP ALARM, FRENCH 1

5 000 938 55 29 OPERATOR WARNING DECAL, SIT DOWN RIDER 1

000 938 46 25 DECAL, WARNING, SIT-DOWN RIDER, SPANISH 1

000 938 46 29 DECAL, OPERATOR SAFETY WARNING-FRENCH 1

6 000 938 46 00 WARNING DECAL, PERSONNEL/FORKS 2

000 938 46 16 DECAL, WARNING, PERSONNEL/FORKS SPANISH 2

000 938 46 31 Decal, Don t Walk Beneath Forks, FRENCH 2

7 000 938 06 63 label text Linde-320-new-RAL9002 1

8 000 938 06 62 label text Linde-250-new-RAL9002 2

9 000 938 46 11 DATA PLATE 1

000 938 46 13 DATA PLATE, SPANISH 1

000 938 46 14 DATA PLATE, FRENCH 1

10 000 938 24 12 label text H25CT 1

000 938 24 13 label text H27CT 1

000 938 24 14 uslabel text H30CT 1

000 938 24 15 label text H32CT 1

PLATES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 10/02 /01

10

Page 512: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

11 000 938 46 54 DECAL, PEDAL CONTROL 1

000 938 46 27 DECAL, DUAL PEDAL CONTROL - SPANISH 1

000 938 46 90 DECAL, DUAL PEDAL, FRENCH 1

12 000 938 46 06 DECAL, "WARNING DO NOT LIFT PERSONNEL" 1

000 938 46 17 DECAL, WARNING, PERSONNEL, SPANISH 1

000 938 46 35 DECAL, WARN "DO NOT LIFT PERSON"-FRENCH 1

13 000 938 46 08 WARNING DECAL, OPERATOR 1

000 938 46 20 DECAL, WARNING, PARK BRAKE, SPANISH 1

000 938 46 36 DECAL,OPERATOR WARNING-FRENCH 1

14 000 938 46 05 WARNING DECAL, PARKING BRAKE 1

000 938 46 23 DECAL, WARNING, OPERATOR, SPANISH 1

000 938 46 32 DECAL, WARNING (HAND BRAKE)-FRENCH 1

15 000 938 46 39 DECAL, WARNING, FLAMMABLE LP GAS 1

000 938 46 88 DECAL, WARNING FLAMMABLE LP GAS, SPANISH 1

000 938 46 76 DECAL, FLAMMABLE LP, FRENCH 1

16 000 938 55 74 label disconnect LP gas hose (en) 1

17 393 439 10 01 DECAL, WARNING HOT SURFACE-DO NOT TOUCH 1

000 938 46 64 DECAL, HOT SURFACE, SPANISH 1

000 938 46 75 DECAL, HOT SURFACE, FRENCH 1

18 000 938 29 13 sticker right 1

19 000 938 29 14 sticker left 1

20 000 938 55 44 label LPG-Tank 1

21 000 938 46 71 label hydraulic oil 1

000 938 55 94 label Hydraulic oil Spanish 1

000 938 55 93 label ,hydraulic oil French 1

22 000 938 46 66 DECAL, LIFT/TILT 1

23 000 938 08 41 label joystick-sideshift 1

PLATES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

10/02 /02 print no.1313 804 90 01 28.10.2009

10

Page 513: H25CT Manual+Linde

Pos. Part-No. I Designation Qantity replaced by Remarks

24 000 938 08 49 label Joystick heben/senken 1

25 000 938 08 50 label Joystick neigen 1

26 000 938 08 51 label joystick s/s, single lever 1

27 000 938 56 09 ***** 1

000 938 56 10 ***** 1

000 938 56 11 ***** 1

28 000 938 46 65 ***** 2 option

PLATES

1 = Packaged quantities 2 = Restricted availability 3 = Parts being phased out 4 = not available individually 5 = see separate list

28.10.2009 print no.1313 804 90 01 10/02 /03

10


Recommended