Date post: | 21-Aug-2018 |
Category: |
Documents |
Upload: | truongquynh |
View: | 239 times |
Download: | 4 times |
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 1, Total 14
H3C S5500-EI Series Enhanced IPv6 10GE Switch
1 Product Overview H3C S5500-EI is a series of enhanced IPv6 L3 10GE switches latest developed by H3C,
S5500-EI series have abundant service features. It supports at most four 10GE extension ports that can satisfy the bandwidth requirements and supports IPv4/IPv6 hardware dual-stack and wire-speed forwarding so that customers can feel at ease to face the coming IPv6 era. Moreover, the excellent security, reliability and multi-service support capability enable the switch series to become the first choice as equipment in the convergence layer of large enterprise networks or campus networks, the core layer of medium- and small-sized enterprise networks, and the edge layer of MANs.
Figure 1 S5500-28C-EI/S5500-28C-PWR-EI
Figure 2 S5500-52C-EI/ S5500-52C-PWR-EI
Figure 3 S5500-28F-EI
At present, the H3C S5500-EI series Ethernet switches including the following models:
l S5500-28C-EI: 24 10/100/1000 BASE-T Ethernet ports, 4 SFP Gigabit ports (Combo)
and two extension slots.
l S5500-52C-EI: 48 10/100/1000 BASE-T Ethernet ports, 4 SFP Gigabit ports (Combo)
and two extension slots.
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 2, Total 14
l S5500-28C-PWR-EI: 24 10/100/1000 BASE-T Ethernet PoE ports, 4 SFP Gigabit ports
(Combo) and two extension slots.
l S5500-52C-PWR-EI: 48 10/100/1000 BASE-T Ethernet PoE ports, 4 SFP Gigabit ports
(Combo) and two extension slots.
l S5500-28F-EI: 24 SFP Gigabit ports, 8 10/100/1000 BASE-T Ethernet ports (Combo)
and two extension slots.
2 Features and Benefits
High expandability to protect investment
As the bandwidth of user terminals keeps increasing, users will ultimately face saturated gigabit aggregated links and it will be the future development trend to provide multiple 10GE links. H3C S5500-EI series supports two extension slots and each slot supports 1-port or 2-port 10GE extension modules. Therefore, the switch reserves the ability to further support 10GE interfaces in Gigabit convergence or access and thus maximally protects the user’s investment.
The evolution from IPv4 to IPv6 is an inevitable trend of Ethernet development. The network equipment’s support for IPv6 not merely means the simple availability but means that the network equipment must reach the critical industrial standards. The S5500-EI has already passed the second phase of IPv6 Ready Forum certification that is the most authoritative worldwide. Based on the hardware IPv4/IPv6 dual-stack platform, the S5500-EI supports abundant IPv4 and IPv6 L3 routing protocols, multicast protocol and policy routing mechanism to implement smooth upgrade from IPv4 to IPv6.
Comprehensive security control policies
The H3C S5500-SI Series support EAD(Endpoint Admission Defense), It enhances the proactive defense capacity of network terminals, and restrains the spread of viruses and worms in a network. Additionally, it disables the access authorities of terminals that fail to meet the security requirements, preventing insecure terminals from endangering the entire network.
The H3C S5500-EI Series support 802.1x authentication to identify users who attempt to access the network. With the 802.1x client version checking function enabled on a switch, the switch checks the version and validity of the 802.1x client running on supplicant systems to prevent those that use earlier versions of 802.1x client or illegal clients from logging in.
The H3C S5500-EI Series support Centralized MAC address authentication, it controls accesses to a network through ports and MAC addresses. This kind of authentication requires
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 3, Total 14
no client software. When operating in centralized MAC address authentication mode, a switch begins to authenticate the user if it detects a new user MAC address. Further more, the H3C S5500-EI Series can Perform 802.1x authentication and MAC address-based authentication simultaneously.
H3C S5500-EI series provides enhanced ACL ,supports ingress and egress ACLs of a super-large capacity as well as VLAN-based ACL , which avoids ACL resource waste while simplifying the user’s configuration process. Moreover, the S5500-EI series supports the Unicast Reverse Path Forwarding (uRPF) technology, which means that the equipment will check the path in a reverse manner to verify if the route from the receiving interface to the source address given in the packet really exists upon receipt of a data packet on one of its interfaces, that is, the equipment will verify the authenticity of the route and delete the data packet if the route does not exist, so as to effectively eradicate source address spoofing that is ever spreading in today’s networks.
High reliability
The S5500-EI series provides equipment-level and link-level reliability protection. All switch models support 1+1 redundancy power supply. Among them, the S5500-28F-EI supports pluggable modular redundancy power supplies, that is, we can flexibly configure AC or DC power modules according to the needs of the actual environment. Moreover, the switch supports fault detection and alarm of its power supply and fans, and can automatically adjust the speed of fans according to temperature changes. All these enable this box switch series to provide the high reliability of a chassis switch.
Besides equipment-level reliability protection, the switch also supports abundant link reliability technologies such as STP/RSTP/MSTP, greatly improving redundant back-up for links and fault tolerance capability, so that the network can run with high stability; LACP, it is a simple and cost efficient way to expand the bandwidth of a switch port and balance the traffic among all the ports in a link aggregation. In addition, connection reliability is enhanced.
Multi-service support capability
The switch supports the Power over Ethernet (PoE) technology to provide power via the Ethernet links to the powered devices (e.g. IP Phone, Wireless AP, etc.), so that we do not need to separately deploy a power system for the devices on site and thus can greatly lower the cost in terminal equipment cabling and management. The switch also supports the Voice VLAN technology. It identifies the voice streams at its ports and adds the corresponding access port to the Voice VLAN, which provides dedicated channels for voice traffic. It automatically issues priority rules to ensure the voice streams are transmitted in the first priority and thus guarantee the conversation quality. By setting the Voice VLAN security
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 4, Total 14
feature, the switch will only permit voice traffic to pass and thus effectively prevent burst traffic from impacting the voice traffic inside the Voice VLAN.
Abundant QoS policies
H3C S5500-EI series supports L2~L4 complex flow classification based on the source MAC address, destination MAC address, source IP address, destination IP address, port, protocol or VLAN. It provides flexible queue scheduling algorithms; supports the setting based on ports and queues; supports three scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR; supports the Committed Access Rate (CAR) function with the minimum granularity of 64 kbps; supports port mirroring in the outbound and inbound directions, which is used for monitoring the packets on the specified port and duplicating the data packets on the port to the monitoring port so as to implement network detection and troubleshooting.
Excellent manageability
H3C S5500-EI series supports SNMP (Simple Network Management Protocol) v1/v2/v3. It supports universal NM platforms like Open View and the H3C iMC (Intelligent Management Centre). It facilitates equipment management by supporting CLI, Web NMS, Telnet and HGMP, and supports numerous encryption modes such as SSH2.0 so as to make management much safer.
H3C S5500-EI series supports MAC-based VLANs. This function well solves the intelligent and flexible management need of mobile office, and may be combined with the particular issuance of ACL polices in the global mode and the VLAN mode to greatly save hardware resources while simplifying the user’s configuration process. What’s more, the switch supports the sFlow function and can randomly sample the inbound and outbound packets according to the set ratio to flexibly collect packets.
3 Product Specifications
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
Switching capacity (Full duplex)
128 Gbps 176 Gbps 128 Gbps 176 Gbps 128 Gbps
Throughput 95.2 Mpps 130.9 Mpps 95.2 Mpps 130.9 Mpps 95.2 Mpps
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 5, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
Dimensions (W × D × H) mm 440 × 300 × 43.6 440 × 420 × 43.6 440 × 360
× 43.6
Weight 4 kg 4.5 kg 6 kg 6.5 kg 6.3 kg
Management port 1 console interface
Service ports
24 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
48 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
24 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
48 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
24 Gigabit SFP ports, eight 10/100/1000 BASE-T Ethernet ports (Combo)
Extension slot 2 extension slots
Optional interface modules
1-port 10GE XFP interface module 2-port 10GE XFP interface module 2-port 10GE CX4 interface module 2-port SFP interface module
POE (Power Of Ethernet) No Yes No
Port aggregation
Support LACP Support manual aggregation Support at most 14/26 aggregation groups, each supporting at most 8 GE ports or 4 10GE ports
Flow control Support IEEE 802.3x (full duplex)
Support storm suppression based on port rate percentage Support storm suppression based on PPS
VLAN
Support port-based VLAN (4k VLANs) Support MAC-based VLAN Support protocol-base VLAN Support QinQ, Selective QinQ Support VLAN Mapping Support Voice VLAN Support GVRP
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 6, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
STP Support STP/RSTP/MSTP Support STP Root Guard Support BPDU Guard
MAC address table
Support 32K MAC addresses Support blackhole MAC addresses Support setting the maximum number of MAC addresses that can be learned at a port
IP routing
Support static route Support RIP v1/v2,RIPng Support OSPF v1/v2,OSPF v3 Support BGP, BGP4+ for IPV6 Support ECMP Support routing policies Support VRRP,VRRPv3 Support Policy Based Routing
MCE Support MCE(Multi-VRF)
IPv6
Support Neighbor Discovery (ND) Support PMTU Support IPv6 Ping and IPv6 Tracert Support IPv6 Telnet, TFTP
Support manual configuration of tunnels Support 6to4 tunnels Support ISATAP tunnels
Multicast
Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 Support IGMP v1/v2/v3, MLD v1/v2 Support PIM-DM, PIM-SM, PIM-SSM, MSDP Support MSDP,MSDP for IPv6 Support MBGP, MBGP for IPv6
QoS/ACL ACL
Support L2 ~ L4 packet filtering and provide flow classification based on the source MAC address, destination MAC address, source IP address (IPv4/IPv6), destination IP address (IPv4/IPv6), port, protocol or VLAN Support Time Range Support ACL policies in the ingress direction and the egress direction Support port based and VLAN-based ACL
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 7, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
QoS
Support bidirectional CAR (Committed Access Rate) Support 8 output queues at each port Support three scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR Support packet redirection.
Support re-labeling the 802.1p and DSCP priorities of a packet.
Mirror Support flow mirroring Support port mirroring(N:4) Support RSPAN
Security
Support hierarchical management and password protection of users
Support Portal, EAD Support AAA, Radius, and HWTacacs+ authentication Support 802.1X authentication Support centralized MAC address based authentication
Support Guest VLAN Support SSH 2.0 Support port isolation Support port security Support binding of IP+MAC+port Support IP Source Check, ARP detection
Management and Maintenance
Support loading and upgrade via the XModem, File Transfer Protocol (FTP), and Trivial File Transfer Protocol (TFTP) Support configuration via CLI, Telnet, and Console port Support SNMPv1/v2/v3, RMON Support H3C iMC(Intelligent Management Centre), WEB management Support HGMPv2 Support NTP Support power alarms Support fan and temperature alarms Support the VCT (Virtual Cable Test) function Support Device Link Detection Protocol (DLDP) Support LLDP Support port loopback detection
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 8, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
AC Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
Input voltage
DC Rated voltage range: 10.8 V to 13.2 V DC
Rated voltage range: -52 V to –55 V DC
Rated voltage range: -48 V to –60 V DC
Power consumption (in full configuration)
AC:110W DC:105w
155 W
575 W(AC input ), Dissipated power: 205 W POE power:370 W 485W(DC input) Dissipated power: 115 W POE power:370 W
640 W(AC input ), Dissipated power: 270 W POE power:370 W 910W(DC input) Dissipated power: 170 W POE power:740 W
115 W
Noise parameter
42.6dBA(low speed) 49.7dBA)(high speed)
41.3dBA(low speed) 50.1dBA)(high speed)
48.1dBA(low speed) 51.1dBA)(high speed)
49.5dBA(low speed) 54.1dBA)(high speed)
45.3dBA(low speed) 50.4dBA)(high speed)
MTBF(years) 22.27 20..43 22.36 19.44 24.29
Operating temperature 0°C to 45°C
Working environment RH (non-condensing)
10% - 90%
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 9, Total 14
4 Network Scenarios
Application in the convergent layer of large enterprise/campus network
In a large enterprise or campus network, the S5500-EI series are located at the convergent layer. They are downlinked to layer 2 switches, such as S3100 series, and uplinked to a high-performance core layer switch through the 10GE aggregation. They can provide high performance, high capability service and higher bandwidth to the access equipements.
Application in the access layer
S5500-EI series can serve as access switches to provide the high port density and high bandwidth. Meanwhile, they have the Power over Ethernet (PoE) function. They can service as the Power Supply Device to the IEEE 802.3af Power Device (PD),such as IP Phone, WLAN AP.
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 10, Total 14
5 Ordering Options
Host
Model Description
LS-5500-28C-EI-OVS H3C S5500-28C-EI,Ethernet Switch(24GE+4SFP Combo+2Slots)
LS-5500-28C-EI-DC-OVS H3C S5500-28C-EI-DC,Ethernet Switch(24GE+4SFP Combo+2Slots,48V DC)
LS-5500-28F-EI-AC-OVS H3C S5500-28F-EI,Ethernet Switch(24SFP+8GE Combo+2Slots),AC Single
LS-5500-28F-EI-DC-OVS H3C S5500-28F-EI,Ethernet Switch(24SFP+8GE Combo+2Slots),DC Single Power
LS-5500-52C-EI-OVS H3C S5500-52C-EI,Ethernet Switch(48GE+4SFP Combo+2Slots)
LS-5500-28C-PWR-EI-OVS H3C S5500-28C-PWR-EI,Ethernet Switch(24GE+4SFP Combo+2Slots+POE)
LS-5500-52C-PWR-EI-OVS H3C S5500-52C-PWR-EI,Ethernet Switch(48GE+4SFP Combo+2Slots+POE)
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 11, Total 14
Interface Modules
Model Description
SFP-GE-SX-MM850-A 1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)
SFP-GE-LX-SM1310-A 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)
SFP-GE-LH40-SM1310 1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
SFP-GE-LH40-SM1550 1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)
SFP-GE-LH70-SM1550 1000BASE-LH70 SFP Transceiver, Single Mode (1550nm, 70km, LC)
SFP-GE-LX-SM1310-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1490, 10km, LC)
SFP-GE-LX-SM1490-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1490/RX1310, 10km, LC)
SFP-FE-SX-MM1310-A 100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC)
SFP-FE-LX-SM1310-A 100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC)
SFP-FE-LH40-SM1310 100BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
SFP-FE-LH80-SM1550 100BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)
XFP-SX-MM850 10GBASE-SR XFP Module, Multi-Mode (850nm, 300m, LC)
XFP-LX-SM1310 10GBASE-LR/LW XFP Module, Single Mode (1310nm, 10km, LC)
XFP-LH40-SM1550-F1 10GBASE-ER/EW XFP Module, Single Mode (1550nm, 40km, LC)
Extended Modules
Model Description
LSPM1XP1P H3C S5500-SI 1-port 10GE XFP Interface Module, XFP Req.
LSPM1XP2P H3C S5500-SI 2-port 10GE XFP Interface Module, XFP Req.
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 12, Total 14
Model Description
LSPM1CX2P H3C S5500-SI 2-Port 10GE Ethernet Local Connection Module
Extended Power Modules for S5500-28F-EI
Model Description
LSPM2150D H3C S5500 150W DC Power Supply Module
LSKM3150A H3C S5500 150W AC Power Supply Module
RPS1000-A3 for S5500-28C-PWR-EI S5500-52C-PWR-EI
Model Description
AC-RPS1000-A3 Redundant Power Supply, 2 PSU slots, with 1 PSU1500 module and 5 connector cables
AC-Flatpack1500-M Power Supply Unit with 600W (AC 110V) or 1450W (AC 220V) (optional)
CAB-RPS PoE-2m-JD5 Cable A with JD5 type connector (optional)
Selection of Optical Modules
GE SFP optical interface modules of H3C S5500-EI series Ethernet switches:
SFP Module Centr
al Wavelength
User Interface
Connector Type
Specification and Maximum
Transmission Distance of
Interface Cable
Quantity Remarks
50/125 µm multi-mode fiber, 550 m
Optional 1000BASE-SX-SFP
850 nm
62.5/125 µm multi-mode fiber, 275 m
Optional
1000BASE-LX-1310
LC
9/125 µm single-mode fiber, 10
0 – 24 (S5500-28F-EI) 0 – 4 (except for S5500-28F-EI)
Optional
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 13, Total 14
SFP Module Centr
al Wavelength
User Interface
Connector Type
Specification and Maximum
Transmission Distance of
Interface Cable
Quantity Remarks
SFP km
1000BASE-LH-SFP
nm 9/125 µm single-mode fiber, 40 km
Optional
1000BASE-ZX-LR-SFP
9/125 µm single-mode fiber, 40 km
Optional
1000BASE-ZX-VR-SFP
1550 nm
9/125 µm single-mode fiber, 70 km
Optional
FE SFP optical interface modules of H3C S5500-EI series Ethernet switches:
SFP Module Central
Wavelength
User Interface Connecto
r Type
Specification and Maximum Transmission
Distance of Interface Cable
Quantity Remarks
100Base-FX-MM-SFP
50/125 µm multi-mode fiber, 2 km
Optional
100Base-FX-SM-SFP
9/125 µm single-mode fiber, 15 km
Optional
100Base-FX-SM-LR-SFP
1310 nm
9/125 µm single-mode fiber, 40 km
Optional
100Base-FX-SM-VR-SFP 1550 nm
LC
9/125 µm single-mode fiber, 80 km
0 – 24 (S5500-28F-EI) 0 – 4 (except fpr S5500-28F-EI]
Optional
XFP optical interface modules of H3C S5500-EI series Ethernet switches:
XFP Module Central Wavelen
gth
User Interface
Connector Type
Interface Fiber Maximum Transmiss
ion Distance
Quantity
Remarks
XFP-SX-MM850 850 nm LC 50/125 µm
multi-mode fiber 300 m 0 - 4 Optional
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 14, Total 14
XFP Module Central Wavelen
gth
User Interface
Connector Type
Interface Fiber Maximum Transmiss
ion Distance
Quantity
Remarks
XFP-LX-SM1310 1310 nm 9/125 µm
single-mode fiber 10 km 0 - 4 Optional
XFP-LH40-SM1550 1550 nm 9/125 µm
single-mode fiber 40 km 0 - 4 Optional
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 1, Total 14
H3C S5500-EI Series Enhanced IPv6 10GE Switch
1 Product Overview H3C S5500-EI is a series of enhanced IPv6 L3 10GE switches latest developed by H3C,
S5500-EI series have abundant service features. It supports at most four 10GE extension ports that can satisfy the bandwidth requirements and supports IPv4/IPv6 hardware dual-stack and wire-speed forwarding so that customers can feel at ease to face the coming IPv6 era. Moreover, the excellent security, reliability and multi-service support capability enable the switch series to become the first choice as equipment in the convergence layer of large enterprise networks or campus networks, the core layer of medium- and small-sized enterprise networks, and the edge layer of MANs.
Figure 1 S5500-28C-EI/S5500-28C-PWR-EI
Figure 2 S5500-52C-EI/ S5500-52C-PWR-EI
Figure 3 S5500-28F-EI
At present, the H3C S5500-EI series Ethernet switches including the following models:
l S5500-28C-EI: 24 10/100/1000 BASE-T Ethernet ports, 4 SFP Gigabit ports (Combo)
and two extension slots.
l S5500-52C-EI: 48 10/100/1000 BASE-T Ethernet ports, 4 SFP Gigabit ports (Combo)
and two extension slots.
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 2, Total 14
l S5500-28C-PWR-EI: 24 10/100/1000 BASE-T Ethernet PoE ports, 4 SFP Gigabit ports
(Combo) and two extension slots.
l S5500-52C-PWR-EI: 48 10/100/1000 BASE-T Ethernet PoE ports, 4 SFP Gigabit ports
(Combo) and two extension slots.
l S5500-28F-EI: 24 SFP Gigabit ports, 8 10/100/1000 BASE-T Ethernet ports (Combo)
and two extension slots.
2 Features and Benefits
High expandability to protect investment
As the bandwidth of user terminals keeps increasing, users will ultimately face saturated gigabit aggregated links and it will be the future development trend to provide multiple 10GE links. H3C S5500-EI series supports two extension slots and each slot supports 1-port or 2-port 10GE extension modules. Therefore, the switch reserves the ability to further support 10GE interfaces in Gigabit convergence or access and thus maximally protects the user’s investment.
The evolution from IPv4 to IPv6 is an inevitable trend of Ethernet development. The network equipment’s support for IPv6 not merely means the simple availability but means that the network equipment must reach the critical industrial standards. The S5500-EI has already passed the second phase of IPv6 Ready Forum certification that is the most authoritative worldwide. Based on the hardware IPv4/IPv6 dual-stack platform, the S5500-EI supports abundant IPv4 and IPv6 L3 routing protocols, multicast protocol and policy routing mechanism to implement smooth upgrade from IPv4 to IPv6.
Comprehensive security control policies
The H3C S5500-SI Series support EAD(Endpoint Admission Defense), It enhances the proactive defense capacity of network terminals, and restrains the spread of viruses and worms in a network. Additionally, it disables the access authorities of terminals that fail to meet the security requirements, preventing insecure terminals from endangering the entire network.
The H3C S5500-EI Series support 802.1x authentication to identify users who attempt to access the network. With the 802.1x client version checking function enabled on a switch, the switch checks the version and validity of the 802.1x client running on supplicant systems to prevent those that use earlier versions of 802.1x client or illegal clients from logging in.
The H3C S5500-EI Series support Centralized MAC address authentication, it controls accesses to a network through ports and MAC addresses. This kind of authentication requires
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 3, Total 14
no client software. When operating in centralized MAC address authentication mode, a switch begins to authenticate the user if it detects a new user MAC address. Further more, the H3C S5500-EI Series can Perform 802.1x authentication and MAC address-based authentication simultaneously.
H3C S5500-EI series provides enhanced ACL ,supports ingress and egress ACLs of a super-large capacity as well as VLAN-based ACL , which avoids ACL resource waste while simplifying the user’s configuration process. Moreover, the S5500-EI series supports the Unicast Reverse Path Forwarding (uRPF) technology, which means that the equipment will check the path in a reverse manner to verify if the route from the receiving interface to the source address given in the packet really exists upon receipt of a data packet on one of its interfaces, that is, the equipment will verify the authenticity of the route and delete the data packet if the route does not exist, so as to effectively eradicate source address spoofing that is ever spreading in today’s networks.
High reliability
The S5500-EI series provides equipment-level and link-level reliability protection. All switch models support 1+1 redundancy power supply. Among them, the S5500-28F-EI supports pluggable modular redundancy power supplies, that is, we can flexibly configure AC or DC power modules according to the needs of the actual environment. Moreover, the switch supports fault detection and alarm of its power supply and fans, and can automatically adjust the speed of fans according to temperature changes. All these enable this box switch series to provide the high reliability of a chassis switch.
Besides equipment-level reliability protection, the switch also supports abundant link reliability technologies such as STP/RSTP/MSTP, greatly improving redundant back-up for links and fault tolerance capability, so that the network can run with high stability; LACP, it is a simple and cost efficient way to expand the bandwidth of a switch port and balance the traffic among all the ports in a link aggregation. In addition, connection reliability is enhanced.
Multi-service support capability
The switch supports the Power over Ethernet (PoE) technology to provide power via the Ethernet links to the powered devices (e.g. IP Phone, Wireless AP, etc.), so that we do not need to separately deploy a power system for the devices on site and thus can greatly lower the cost in terminal equipment cabling and management. The switch also supports the Voice VLAN technology. It identifies the voice streams at its ports and adds the corresponding access port to the Voice VLAN, which provides dedicated channels for voice traffic. It automatically issues priority rules to ensure the voice streams are transmitted in the first priority and thus guarantee the conversation quality. By setting the Voice VLAN security
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 4, Total 14
feature, the switch will only permit voice traffic to pass and thus effectively prevent burst traffic from impacting the voice traffic inside the Voice VLAN.
Abundant QoS policies
H3C S5500-EI series supports L2~L4 complex flow classification based on the source MAC address, destination MAC address, source IP address, destination IP address, port, protocol or VLAN. It provides flexible queue scheduling algorithms; supports the setting based on ports and queues; supports three scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR; supports the Committed Access Rate (CAR) function with the minimum granularity of 64 kbps; supports port mirroring in the outbound and inbound directions, which is used for monitoring the packets on the specified port and duplicating the data packets on the port to the monitoring port so as to implement network detection and troubleshooting.
Excellent manageability
H3C S5500-EI series supports SNMP (Simple Network Management Protocol) v1/v2/v3. It supports universal NM platforms like Open View and the H3C iMC (Intelligent Management Centre). It facilitates equipment management by supporting CLI, Web NMS, Telnet and HGMP, and supports numerous encryption modes such as SSH2.0 so as to make management much safer.
H3C S5500-EI series supports MAC-based VLANs. This function well solves the intelligent and flexible management need of mobile office, and may be combined with the particular issuance of ACL polices in the global mode and the VLAN mode to greatly save hardware resources while simplifying the user’s configuration process. What’s more, the switch supports the sFlow function and can randomly sample the inbound and outbound packets according to the set ratio to flexibly collect packets.
3 Product Specifications
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
Switching capacity (Full duplex)
128 Gbps 176 Gbps 128 Gbps 176 Gbps 128 Gbps
Throughput 95.2 Mpps 130.9 Mpps 95.2 Mpps 130.9 Mpps 95.2 Mpps
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 5, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
Dimensions (W × D × H) mm 440 × 300 × 43.6 440 × 420 × 43.6 440 × 360
× 43.6
Weight 4 kg 4.5 kg 6 kg 6.5 kg 6.3 kg
Management port 1 console interface
Service ports
24 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
48 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
24 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
48 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo)
24 Gigabit SFP ports, eight 10/100/1000 BASE-T Ethernet ports (Combo)
Extension slot 2 extension slots
Optional interface modules
1-port 10GE XFP interface module 2-port 10GE XFP interface module 2-port 10GE CX4 interface module 2-port SFP interface module
POE (Power Of Ethernet) No Yes No
Port aggregation
Support LACP Support manual aggregation Support at most 14/26 aggregation groups, each supporting at most 8 GE ports or 4 10GE ports
Flow control Support IEEE 802.3x (full duplex)
Support storm suppression based on port rate percentage Support storm suppression based on PPS
VLAN
Support port-based VLAN (4k VLANs) Support MAC-based VLAN Support protocol-base VLAN Support QinQ, Selective QinQ Support VLAN Mapping Support Voice VLAN Support GVRP
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 6, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
STP Support STP/RSTP/MSTP Support STP Root Guard Support BPDU Guard
MAC address table
Support 32K MAC addresses Support blackhole MAC addresses Support setting the maximum number of MAC addresses that can be learned at a port
IP routing
Support static route Support RIP v1/v2,RIPng Support OSPF v1/v2,OSPF v3 Support BGP, BGP4+ for IPV6 Support ECMP Support routing policies Support VRRP,VRRPv3 Support Policy Based Routing
MCE Support MCE(Multi-VRF)
IPv6
Support Neighbor Discovery (ND) Support PMTU Support IPv6 Ping and IPv6 Tracert Support IPv6 Telnet, TFTP
Support manual configuration of tunnels Support 6to4 tunnels Support ISATAP tunnels
Multicast
Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 Support IGMP v1/v2/v3, MLD v1/v2 Support PIM-DM, PIM-SM, PIM-SSM, MSDP Support MSDP,MSDP for IPv6 Support MBGP, MBGP for IPv6
QoS/ACL ACL
Support L2 ~ L4 packet filtering and provide flow classification based on the source MAC address, destination MAC address, source IP address (IPv4/IPv6), destination IP address (IPv4/IPv6), port, protocol or VLAN Support Time Range Support ACL policies in the ingress direction and the egress direction Support port based and VLAN-based ACL
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 7, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
QoS
Support bidirectional CAR (Committed Access Rate) Support 8 output queues at each port Support three scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR Support packet redirection.
Support re-labeling the 802.1p and DSCP priorities of a packet.
Mirror Support flow mirroring Support port mirroring(N:4) Support RSPAN
Security
Support hierarchical management and password protection of users
Support Portal, EAD Support AAA, Radius, and HWTacacs+ authentication Support 802.1X authentication Support centralized MAC address based authentication
Support Guest VLAN Support SSH 2.0 Support port isolation Support port security Support binding of IP+MAC+port Support IP Source Check, ARP detection
Management and Maintenance
Support loading and upgrade via the XModem, File Transfer Protocol (FTP), and Trivial File Transfer Protocol (TFTP) Support configuration via CLI, Telnet, and Console port Support SNMPv1/v2/v3, RMON Support H3C iMC(Intelligent Management Centre), WEB management Support HGMPv2 Support NTP Support power alarms Support fan and temperature alarms Support the VCT (Virtual Cable Test) function Support Device Link Detection Protocol (DLDP) Support LLDP Support port loopback detection
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 8, Total 14
Features S5500-28C-EI S5500-52C-EI
S5500-28C-PWR-EI
S5500-52C-PWR-EI
S5500-28F-EI
AC Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
Input voltage
DC Rated voltage range: 10.8 V to 13.2 V DC
Rated voltage range: -52 V to –55 V DC
Rated voltage range: -48 V to –60 V DC
Power consumption (in full configuration)
AC:110W DC:105w
155 W
575 W(AC input ), Dissipated power: 205 W POE power:370 W 485W(DC input) Dissipated power: 115 W POE power:370 W
640 W(AC input ), Dissipated power: 270 W POE power:370 W 910W(DC input) Dissipated power: 170 W POE power:740 W
115 W
Noise parameter
42.6dBA(low speed) 49.7dBA)(high speed)
41.3dBA(low speed) 50.1dBA)(high speed)
48.1dBA(low speed) 51.1dBA)(high speed)
49.5dBA(low speed) 54.1dBA)(high speed)
45.3dBA(low speed) 50.4dBA)(high speed)
MTBF(years) 22.27 20..43 22.36 19.44 24.29
Operating temperature 0°C to 45°C
Working environment RH (non-condensing)
10% - 90%
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 9, Total 14
4 Network Scenarios
Application in the convergent layer of large enterprise/campus network
In a large enterprise or campus network, the S5500-EI series are located at the convergent layer. They are downlinked to layer 2 switches, such as S3100 series, and uplinked to a high-performance core layer switch through the 10GE aggregation. They can provide high performance, high capability service and higher bandwidth to the access equipements.
Application in the access layer
S5500-EI series can serve as access switches to provide the high port density and high bandwidth. Meanwhile, they have the Power over Ethernet (PoE) function. They can service as the Power Supply Device to the IEEE 802.3af Power Device (PD),such as IP Phone, WLAN AP.
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 10, Total 14
5 Ordering Options
Host
Model Description
LS-5500-28C-EI-OVS H3C S5500-28C-EI,Ethernet Switch(24GE+4SFP Combo+2Slots)
LS-5500-28C-EI-DC-OVS H3C S5500-28C-EI-DC,Ethernet Switch(24GE+4SFP Combo+2Slots,48V DC)
LS-5500-28F-EI-AC-OVS H3C S5500-28F-EI,Ethernet Switch(24SFP+8GE Combo+2Slots),AC Single
LS-5500-28F-EI-DC-OVS H3C S5500-28F-EI,Ethernet Switch(24SFP+8GE Combo+2Slots),DC Single Power
LS-5500-52C-EI-OVS H3C S5500-52C-EI,Ethernet Switch(48GE+4SFP Combo+2Slots)
LS-5500-28C-PWR-EI-OVS H3C S5500-28C-PWR-EI,Ethernet Switch(24GE+4SFP Combo+2Slots+POE)
LS-5500-52C-PWR-EI-OVS H3C S5500-52C-PWR-EI,Ethernet Switch(48GE+4SFP Combo+2Slots+POE)
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 11, Total 14
Interface Modules
Model Description
SFP-GE-SX-MM850-A 1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)
SFP-GE-LX-SM1310-A 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)
SFP-GE-LH40-SM1310 1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
SFP-GE-LH40-SM1550 1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)
SFP-GE-LH70-SM1550 1000BASE-LH70 SFP Transceiver, Single Mode (1550nm, 70km, LC)
SFP-GE-LX-SM1310-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1490, 10km, LC)
SFP-GE-LX-SM1490-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1490/RX1310, 10km, LC)
SFP-FE-SX-MM1310-A 100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC)
SFP-FE-LX-SM1310-A 100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC)
SFP-FE-LH40-SM1310 100BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
SFP-FE-LH80-SM1550 100BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)
XFP-SX-MM850 10GBASE-SR XFP Module, Multi-Mode (850nm, 300m, LC)
XFP-LX-SM1310 10GBASE-LR/LW XFP Module, Single Mode (1310nm, 10km, LC)
XFP-LH40-SM1550-F1 10GBASE-ER/EW XFP Module, Single Mode (1550nm, 40km, LC)
Extended Modules
Model Description
LSPM1XP1P H3C S5500-SI 1-port 10GE XFP Interface Module, XFP Req.
LSPM1XP2P H3C S5500-SI 2-port 10GE XFP Interface Module, XFP Req.
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 12, Total 14
Model Description
LSPM1CX2P H3C S5500-SI 2-Port 10GE Ethernet Local Connection Module
Extended Power Modules for S5500-28F-EI
Model Description
LSPM2150D H3C S5500 150W DC Power Supply Module
LSKM3150A H3C S5500 150W AC Power Supply Module
RPS1000-A3 for S5500-28C-PWR-EI S5500-52C-PWR-EI
Model Description
AC-RPS1000-A3 Redundant Power Supply, 2 PSU slots, with 1 PSU1500 module and 5 connector cables
AC-Flatpack1500-M Power Supply Unit with 600W (AC 110V) or 1450W (AC 220V) (optional)
CAB-RPS PoE-2m-JD5 Cable A with JD5 type connector (optional)
Selection of Optical Modules
GE SFP optical interface modules of H3C S5500-EI series Ethernet switches:
SFP Module Centr
al Wavelength
User Interface
Connector Type
Specification and Maximum
Transmission Distance of
Interface Cable
Quantity Remarks
50/125 µm multi-mode fiber, 550 m
Optional 1000BASE-SX-SFP
850 nm
62.5/125 µm multi-mode fiber, 275 m
Optional
1000BASE-LX-1310
LC
9/125 µm single-mode fiber, 10
0 – 24 (S5500-28F-EI) 0 – 4 (except for S5500-28F-EI)
Optional
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 13, Total 14
SFP Module Centr
al Wavelength
User Interface
Connector Type
Specification and Maximum
Transmission Distance of
Interface Cable
Quantity Remarks
SFP km
1000BASE-LH-SFP
nm 9/125 µm single-mode fiber, 40 km
Optional
1000BASE-ZX-LR-SFP
9/125 µm single-mode fiber, 40 km
Optional
1000BASE-ZX-VR-SFP
1550 nm
9/125 µm single-mode fiber, 70 km
Optional
FE SFP optical interface modules of H3C S5500-EI series Ethernet switches:
SFP Module Central
Wavelength
User Interface Connecto
r Type
Specification and Maximum Transmission
Distance of Interface Cable
Quantity Remarks
100Base-FX-MM-SFP
50/125 µm multi-mode fiber, 2 km
Optional
100Base-FX-SM-SFP
9/125 µm single-mode fiber, 15 km
Optional
100Base-FX-SM-LR-SFP
1310 nm
9/125 µm single-mode fiber, 40 km
Optional
100Base-FX-SM-VR-SFP 1550 nm
LC
9/125 µm single-mode fiber, 80 km
0 – 24 (S5500-28F-EI) 0 – 4 (except fpr S5500-28F-EI]
Optional
XFP optical interface modules of H3C S5500-EI series Ethernet switches:
XFP Module Central Wavelen
gth
User Interface
Connector Type
Interface Fiber Maximum Transmiss
ion Distance
Quantity
Remarks
XFP-SX-MM850 850 nm LC 50/125 µm
multi-mode fiber 300 m 0 - 4 Optional
H3C S5500-EI Series Enhanced IPv6 10GE Switch
Hangzhou H3C Technologies Co.,Ltd. www.h3c.com.cn Page 14, Total 14
XFP Module Central Wavelen
gth
User Interface
Connector Type
Interface Fiber Maximum Transmiss
ion Distance
Quantity
Remarks
XFP-LX-SM1310 1310 nm 9/125 µm
single-mode fiber 10 km 0 - 4 Optional
XFP-LH40-SM1550 1550 nm 9/125 µm
single-mode fiber 40 km 0 - 4 Optional