12
HAAS-THERM™ commercial insulated sectional doorsfrom Haas Door have an excellent R-Value, strongsteel construction, and numerous aesthetic options.
HAAS-THERMCommercial Insulated Steel DoorsModels CHT-710, CHT-716, CHT-732, CHT-780, and CHT-790
™
1-3/4” Thick CFC-Free,
Foam-InjectedPolyurethane
Core
20356.qxd:13705.qxd 9/13/07 2:05 PM Page 1
HAAS -THERM™
Energy EfficiencyHAAS-THERM™ doors are 1-3/4”
thick. The calculated R-Value for thisproduct is 16.18. Rigid vinyl extrusionswith positive thermal breaks are used toeliminate metal-to-metal contact, whichlimits the transfer of temperature.Tongue-and-groove construction andsection joint seals at meeting rails pro-vide optimum water and wind resistance.
A full-length, one-piece vinyl astragalretainer and flexible vinyl U-shapedweatherstrip prevent infiltration of air,rain, snow, and debris. The seal fits toirregular or unlevel floors and reducesimpact shocks when the door is closedagainst concrete flooring.
Exceptional StrengthHAAS-THERM™ doors are built strong.
The high-density CFC-free polyurethanefoam expands and adheres to the interi-or and exterior steel panels to provide arigid unitized structure.
C O M M E R C I A L I N S U L A T E D S T E E L D O O R S
Our doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meetwindload specifications and to complywith ANSI A216.1 and NAGDM 102-1988.
Unique Paint SystemOur three-tier, corrosion-resistant
protective paint system is designed toresist even the most hostile weatherconditions. The protective layers foundon both the interior and exterior are:
1 Injected polyurethane foam
2 Steel3 Galvanizing4 Epoxy primer5 Polyester finish coat
Hard-Working HardwareThe track is 2 or 3” galvanized steel,
depending on door size, with bracketmount for wood jambs or continuousreverse mounting for steel jambs. For
angle-mount track, door widths are 2”wider than opening. Track rollers are 2 or 3” case-hardened inner and outersteel races with 10-ball, prelubricatedbearings. Hinges, brackets, and rein-forced struts are hot-dipped galvanizedsteel, and fasteners are plated for maxi-mum corrosion resistance.
Counterbalancing springs are torsiontype, computer calibrated to matchdoor load. This provides a 10,000 cyclelife at the minimum; optional springwires can achieve 25,000, 50,000, and100,000 cycle requirements. Springs arewound from oil-tempered wire andmounted on a continuous cross headertube or solid shaft, as determined bytorque load.
You can contact Haas Door or one ofour professional dealers for informationon additional options, including exteri-or cylinder locks, chain hoist operation,safety bottom brackets, and special liftclearance tracks (high lift, vertical lift,low headroom, and those that followthe roof line).
HAAS-THERM™
CHT-710HAAS-THERM™
CHT-716HAAS-THERM™
CHT-780HAAS-THERM™
CHT-732
Window Options
Your Professional Haas Door Dealer:
Quick Reference ChartExterior Interior Exterior Interior Calculated Steel
Model Design Design Thickness Gauge Gauge U-Value R-Value Prefinished End Stiles
CHT-710 Flush Grooved 1-3/4” 26 26 .062 16.18 White/Brown/ Optionalwood-grain wood-grain Almond/Sandstone/
texture texture Hunter Green/Gray/Bronze
CHT-716 Grooved Grooved 1-3/4” 26 26 .062 16.18 White/Brown/ Standard wood-grain wood-grain Almond/Sandstone/
texture texture Hunter Green/Gray/Bronze
CHT-732 Smooth Grooved 1-3/4” 20 26 .062 16.18 White/Brown Standardwood-grain
texture
Optional exterior designs of CHT-710 include CHT-780 with an embossed wood-grain texture and CHT-790 with a sculptured wood-grain texture
The Strength To Keep out Noise and Weather...HAAS-THERM™ doors stand up to the elements — insulating, dampening noise,
and enhancing your building’s aesthetics at the same time. These insulated steeldoors help increase energy savings with the polyurethane-foam cores.
U-Shaped Astragal
Tongue-and-Groove Construction
Thermal Break
Section Joint Seal
HAAS-THERM™
CHT-790
Full-Vision Panels — full-view aluminum sectionspainted brown or white, withvarious glazing options (upto 1/2” insulated glass);maximum width 20’2”
Individual Windows —double-wall 1/2” temperedglass (25” x 12”)
1245 3
PolyurethaneInsulation
20-GaugeInterior Platefor HingeAttachment
16-GaugeSteel EndStile
20356.qxd:13705.qxd 9/13/07 2:05 PM Page 2
- - - - - T H I S W A R R A N T Y I S N O T T R A N S F E R A B L E - - - - -
2011 Haas Door Company Effective: March 1, 2005
Revised: March 29, 2011
CCHHTT//CCMMTT SSeerr iieess MMOODD EELL 6600 00 ,, 7700 00 ,, 2200 0000 ,, 88 00 00
SSTTEEEELL CC OOMMMMEERR CCIIAALL GGAARRAAGG EE DD OO OORR SS
Haas Door Company warrants its commercial CMT-600, CHT-700, CHT-2000, and CHT-800 series steel garage door sections to be free from delamination or rust-through for a period of 5 years to the original purchaser of the building where the door sections are installed. All other components are warranted to be free from defects in workmanship and material for a period of one (1) year from date of installation.
This five year Warranty applies only to steel garage door sections manufactured by Haas Door Company and components manufactured or supplied by Haas Door Company. The warranty excludes: (1) Sections and/or component parts which have been damaged due to misuse; (2) Sections and/or components which have been improperly installed, maintained or operated; (3) Sections and/or components that have been damaged due to accident; (4) Sections and/or components that have been damaged due to exposure to corrosive fumes/chemicals, alkaline cleaning agents, condensation or fire; (5) Performance of coatings used to finish the garage door sections; (6) Repair and/or replacement labor charges, including travel cost; (7) Damages resulting from other causes beyond the manufacturers control.
In the event any defect is claimed during the warranty periods, a claim in writing must be submitted to Haas Door Company, directed through an authorized Haas Door Company dealer or installer. This claim must be submitted within fifteen (15) days of the discovery of the suspected defect. The door and all components must be available for inspection by an authorized Haas Door Company representative. Upon verification of a manufacturing defect, Haas Door Company will provide repair or replacement part(s) at its option.
THE MANUFACTURER SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY BREACH OF THIS EXPRESS LIMITED WARRANTY, including but not limited to any damage to buildings, other property or for any injuries or damages sustained by any person whomsoever, or the recovery of any direct or indirect costs such as shipping, travel, lost time, installation labor charges, paint or painting, cleaning, repair, or other building materials. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state. Haas Door Company does not authorize anyone to change or modify the above warranties in any respect. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THE COMMERCIAL MODEL (S) OF INSULATED STEEL OVERHEAD GARAGE DOORS IS LIMITED IN DURATION TO THE DURATION OF THE HAAS DOOR COMPANY WRITTEN WARRANTY SET FORTH ABOVE AND NEITHER HAAS DOOR COMPANY NOR ANY AUTHORIZED SELLING DEALER SHALL BE LIABLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, OR OTHER CONSEQUENTIAL OR INCIDENTAL DAMAGES. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, particularly in consumer transactions, so the above limitations or exclusions may not apply to you.
